From c6269ca44806ccccd60cba5050ae3e9153eaa80b Mon Sep 17 00:00:00 2001 From: Razvalyaev Date: Fri, 9 May 2025 21:34:37 +0300 Subject: [PATCH] diplom init --- Code/Core/Inc/gpio.h | 49 - Code/Core/Inc/main.h | 69 - Code/Core/Inc/stm32f4xx_hal_conf.h | 495 - Code/Core/Inc/stm32f4xx_it.h | 66 - Code/Core/Inc/trace.h | 90 - Code/Core/Src/gpio.c | 61 - Code/Core/Src/main.c | 256 - Code/Core/Src/stm32f4xx_hal_msp.c | 81 - Code/Core/Src/stm32f4xx_it.c | 205 - Code/Core/Src/system_stm32f4xx.c | 747 - Code/GENERAL/gpio_general.c | 31 - Code/GENERAL/gpio_general.h | 17 - Code/GENERAL/periph_general.h | 29 - Code/GENERAL/tim_general.c | 481 - Code/GENERAL/tim_general.h | 127 - Code/GENERAL/uart_general.c | 373 - Code/GENERAL/uart_general.h | 106 - Code/Modbus/crc_algs.c | 116 - Code/Modbus/crc_algs.h | 9 - Code/Modbus/modbus.c | 864 - Code/Modbus/modbus.h | 418 - Code/Modbus/modbus_data.h | 71 - Code/Modbus/rs_message.c | 502 - Code/Modbus/rs_message.h | 297 - Code/PWM/control.c | 240 - Code/PWM/control.h | 48 - Code/PWM/pwm.c | 855 - Code/PWM/pwm.h | 324 - Code/PWM/settings.c | 265 - Code/PWM/settings.h | 151 - .../Device/STM32F1xx/stm32f100xb_matlab.h | 5974 ++++++ .../Device/STM32F1xx/stm32f100xe_matlab.h | 6589 +++++++ .../Device/STM32F1xx/stm32f101x6_matlab.h | 5317 ++++++ .../Device/STM32F1xx/stm32f101xb_matlab.h | 5448 ++++++ .../Device/STM32F1xx/stm32f101xe_matlab.h | 6505 +++++++ .../Device/STM32F1xx/stm32f101xg_matlab.h | 6715 +++++++ .../Device/STM32F1xx/stm32f102x6_matlab.h | 6450 +++++++ .../Device/STM32F1xx/stm32f102xb_matlab.h | 6572 +++++++ .../Device/STM32F1xx/stm32f103x6_matlab.h | 10111 ++++++++++ .../Device/STM32F1xx/stm32f103xb_matlab.h | 10271 ++++++++++ .../Device/STM32F1xx/stm32f103xe_matlab.h | 11769 ++++++++++++ .../Device/STM32F1xx/stm32f103xg_matlab.h | 11953 ++++++++++++ .../Device/STM32F1xx/stm32f105xc_matlab.h | 14342 ++++++++++++++ .../Device/STM32F1xx/stm32f107xc_matlab.h | 15255 +++++++++++++++ .../CMSIS/Device/STM32F1xx/stm32f1xx.h | 275 + .../CMSIS/Device/STM32F1xx/system_stm32f1xx.h | 98 + .../Drivers/CMSIS/arm_defines.h | 104 + .../Drivers/CMSIS/core_cm1_matlab.h | 976 + .../Drivers/CMSIS/core_cm3_matlab.h | 1823 ++ .../Drivers/CMSIS/core_cm4_matlab.h | 55 +- .../Drivers/CMSIS/stdint.h | 0 .../Inc/Legacy/stm32_hal_legacy.h | 473 +- .../Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h | 128 + .../Inc/Legacy/stm32f1xx_hal_can_legacy.h | 407 +- .../Inc/stm32_assert_template.h | 21 +- .../STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h | 358 + .../Inc/stm32f1xx_hal_adc.h | 1004 + .../Inc/stm32f1xx_hal_adc_ex.h | 710 + .../Inc/stm32f1xx_hal_can.h | 28 +- .../Inc/stm32f1xx_hal_cec.h | 552 + .../Inc/stm32f1xx_hal_conf_template.h | 325 +- .../Inc/stm32f1xx_hal_cortex.h | 27 +- .../Inc/stm32f1xx_hal_crc.h | 25 +- .../Inc/stm32f1xx_hal_dac.h | 73 +- .../Inc/stm32f1xx_hal_dac_ex.h | 111 +- .../Inc/stm32f1xx_hal_def.h | 150 +- .../Inc/stm32f1xx_hal_dma.h | 457 + .../Inc/stm32f1xx_hal_dma_ex.h | 277 + .../Inc/stm32f1xx_hal_eth.h | 348 +- .../Inc/stm32f1xx_hal_exti.h | 178 +- .../Inc/stm32f1xx_hal_flash.h | 328 + .../Inc/stm32f1xx_hal_flash_ex.h | 786 + .../Inc/stm32f1xx_hal_gpio.h | 169 +- .../Inc/stm32f1xx_hal_gpio_ex.h | 894 + .../Inc/stm32f1xx_hal_hcd.h | 30 +- .../Inc/stm32f1xx_hal_i2c.h | 27 +- .../Inc/stm32f1xx_hal_i2s.h | 102 +- .../Inc/stm32f1xx_hal_irda.h | 50 +- .../Inc/stm32f1xx_hal_iwdg.h | 25 +- .../Inc/stm32f1xx_hal_mmc.h | 40 +- .../Inc/stm32f1xx_hal_nand.h | 45 +- .../Inc/stm32f1xx_hal_nor.h | 49 +- .../Inc/stm32f1xx_hal_pccard.h | 43 +- .../Inc/stm32f1xx_hal_pcd.h | 1065 ++ .../Inc/stm32f1xx_hal_pcd_ex.h | 88 + .../Inc/stm32f1xx_hal_pwr.h | 343 +- .../Inc/stm32f1xx_hal_rcc.h | 1378 ++ .../Inc/stm32f1xx_hal_rcc_ex.h | 1908 ++ .../Inc/stm32f1xx_hal_rtc.h | 607 + .../Inc/stm32f1xx_hal_rtc_ex.h | 412 + .../Inc/stm32f1xx_hal_sd.h | 25 +- .../Inc/stm32f1xx_hal_smartcard.h | 48 +- .../Inc/stm32f1xx_hal_spi.h | 74 +- .../Inc/stm32f1xx_hal_sram.h | 43 +- .../Inc/stm32f1xx_hal_tim.h | 111 +- .../Inc/stm32f1xx_hal_tim_ex.h | 122 +- .../Inc/stm32f1xx_hal_uart.h | 85 +- .../Inc/stm32f1xx_hal_usart.h | 73 +- .../Inc/stm32f1xx_hal_wwdg.h | 27 +- .../Inc/stm32f1xx_ll_adc.h | 2117 +-- .../Inc/stm32f1xx_ll_bus.h | 1015 + .../Inc/stm32f1xx_ll_cortex.h | 35 +- .../Inc/stm32f1xx_ll_crc.h | 25 +- .../Inc/stm32f1xx_ll_dac.h | 282 +- .../Inc/stm32f1xx_ll_dma.h | 1960 ++ .../Inc/stm32f1xx_ll_exti.h | 146 +- .../Inc/stm32f1xx_ll_fsmc.h | 275 +- .../Inc/stm32f1xx_ll_gpio.h | 2347 +++ .../Inc/stm32f1xx_ll_i2c.h | 136 +- .../Inc/stm32f1xx_ll_iwdg.h | 25 +- .../Inc/stm32f1xx_ll_pwr.h | 440 + .../Inc/stm32f1xx_ll_rcc.h | 2312 +++ .../Inc/stm32f1xx_ll_rtc.h | 1003 + .../Inc/stm32f1xx_ll_sdmmc.h | 58 +- .../Inc/stm32f1xx_ll_spi.h | 123 +- .../Inc/stm32f1xx_ll_system.h | 574 + .../Inc/stm32f1xx_ll_tim.h | 229 +- .../Inc/stm32f1xx_ll_usart.h | 138 +- .../Inc/stm32f1xx_ll_usb.h | 264 +- .../Inc/stm32f1xx_ll_utils.h | 95 +- .../Inc/stm32f1xx_ll_wwdg.h | 25 +- .../STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c | 427 +- .../Src/stm32f1xx_hal_adc.c | 2437 +++ .../Src/stm32f1xx_hal_adc_ex.c | 1337 ++ .../Src/stm32f1xx_hal_can.c | 84 +- .../Src/stm32f1xx_hal_cec.c | 819 +- .../Src/stm32f1xx_hal_cortex.c | 89 +- .../Src/stm32f1xx_hal_crc.c | 30 +- .../Src/stm32f1xx_hal_dac.c | 155 +- .../Src/stm32f1xx_hal_dac_ex.c | 45 +- .../Src/stm32f1xx_hal_dma.c | 899 + .../Src/stm32f1xx_hal_eth.c | 2292 +++ .../Src/stm32f1xx_hal_exti.c | 58 +- .../Src/stm32f1xx_hal_flash.c | 967 + .../Src/stm32f1xx_hal_flash_ex.c | 1127 ++ .../Src/stm32f1xx_hal_gpio.c | 587 + .../Src/stm32f1xx_hal_gpio_ex.c | 127 + .../Src/stm32f1xx_hal_hcd.c | 166 +- .../Src/stm32f1xx_hal_i2c.c | 472 +- .../Src/stm32f1xx_hal_i2s.c | 393 +- .../Src/stm32f1xx_hal_irda.c | 129 +- .../Src/stm32f1xx_hal_iwdg.c | 35 +- .../Src/stm32f1xx_hal_mmc.c | 555 +- .../Src/stm32f1xx_hal_msp_template.c | 39 +- .../Src/stm32f1xx_hal_nand.c | 198 +- .../Src/stm32f1xx_hal_nor.c | 203 +- .../Src/stm32f1xx_hal_pccard.c | 84 +- .../Src/stm32f1xx_hal_pcd.c | 1256 +- .../Src/stm32f1xx_hal_pcd_ex.c | 244 + .../Src/stm32f1xx_hal_pwr.c | 520 +- .../Src/stm32f1xx_hal_rcc.c | 1413 ++ .../Src/stm32f1xx_hal_rcc_ex.c | 863 + .../Src/stm32f1xx_hal_rtc.c | 1949 ++ .../Src/stm32f1xx_hal_rtc_ex.c | 579 + .../Src/stm32f1xx_hal_sd.c | 110 +- .../Src/stm32f1xx_hal_smartcard.c | 96 +- .../Src/stm32f1xx_hal_spi.c | 302 +- .../Src/stm32f1xx_hal_sram.c | 92 +- .../Src/stm32f1xx_hal_tim.c | 988 +- .../Src/stm32f1xx_hal_tim_ex.c | 395 +- ...tm32f1xx_hal_timebase_rtc_alarm_template.c | 226 +- .../Src/stm32f1xx_hal_timebase_tim_template.c | 82 +- .../Src/stm32f1xx_hal_uart.c | 403 +- .../Src/stm32f1xx_hal_usart.c | 206 +- .../Src/stm32f1xx_hal_wwdg.c | 40 +- .../Src/stm32f1xx_ll_adc.c | 332 +- .../Src/stm32f1xx_ll_crc.c | 33 +- .../Src/stm32f1xx_ll_dac.c | 43 +- .../Src/stm32f1xx_ll_dma.c | 314 + .../Src/stm32f1xx_ll_exti.c | 23 +- .../Src/stm32f1xx_ll_fsmc.c | 306 +- .../Src/stm32f1xx_ll_gpio.c | 258 + .../Src/stm32f1xx_ll_i2c.c | 62 +- .../Src/stm32f1xx_ll_pwr.c | 23 +- .../Src/stm32f1xx_ll_rcc.c | 474 + .../Src/stm32f1xx_ll_rtc.c | 544 + .../Src/stm32f1xx_ll_sdmmc.c | 199 +- .../Src/stm32f1xx_ll_spi.c | 144 +- .../Src/stm32f1xx_ll_tim.c | 94 +- .../Src/stm32f1xx_ll_usart.c | 160 +- .../Src/stm32f1xx_ll_usb.c | 1521 +- .../Src/stm32f1xx_ll_utils.c | 770 + .../stm32f1xx_matlab_gpio.c | 36 + .../stm32f1xx_matlab_gpio.h | 22 + .../STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.c | 0 .../STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.h | 36 + .../STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.c | 324 +- .../STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.h | 123 + .../stm32f1xx_periph_registers.c | 47 + MCU_STM32F1xx_Matlab/stm32_defs.h | 6 + MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.c | 166 + MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.h | 114 + .../Drivers/CMSIS/arm_defines.h | 291 - .../Drivers/CMSIS/stm32f407xx_matlab.h | 15585 ---------------- .../Drivers/CMSIS/stm32f407xx_matlab_memory.h | 146 - .../Drivers/CMSIS/stm32f4xx.h | 301 - .../Drivers/CMSIS/system_stm32f4xx.h | 104 - .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h | 298 - .../Inc/stm32f4xx_hal_adc.h | 898 - .../Inc/stm32f4xx_hal_adc_ex.h | 407 - .../Inc/stm32f4xx_hal_cec.h | 792 - .../Inc/stm32f4xx_hal_cryp.h | 683 - .../Inc/stm32f4xx_hal_cryp_ex.h | 142 - .../Inc/stm32f4xx_hal_dcmi.h | 563 - .../Inc/stm32f4xx_hal_dcmi_ex.h | 208 - .../Inc/stm32f4xx_hal_dfsdm.h | 1141 -- .../Inc/stm32f4xx_hal_dma.h | 802 - .../Inc/stm32f4xx_hal_dma2d.h | 638 - .../Inc/stm32f4xx_hal_dma_ex.h | 102 - .../Inc/stm32f4xx_hal_dsi.h | 1377 -- .../Inc/stm32f4xx_hal_eth.h | 2144 --- .../Inc/stm32f4xx_hal_flash.h | 425 - .../Inc/stm32f4xx_hal_flash_ex.h | 1063 -- .../Inc/stm32f4xx_hal_flash_ramfunc.h | 76 - .../Inc/stm32f4xx_hal_fmpi2c.h | 837 - .../Inc/stm32f4xx_hal_fmpi2c_ex.h | 150 - .../Inc/stm32f4xx_hal_fmpsmbus.h | 790 - .../Inc/stm32f4xx_hal_fmpsmbus_ex.h | 136 - .../Inc/stm32f4xx_hal_gpio_ex.h | 1590 -- .../Inc/stm32f4xx_hal_hash.h | 634 - .../Inc/stm32f4xx_hal_hash_ex.h | 175 - .../Inc/stm32f4xx_hal_i2c_ex.h | 115 - .../Inc/stm32f4xx_hal_i2s_ex.h | 183 - .../Inc/stm32f4xx_hal_lptim.h | 857 - .../Inc/stm32f4xx_hal_ltdc.h | 719 - .../Inc/stm32f4xx_hal_ltdc_ex.h | 83 - .../Inc/stm32f4xx_hal_pcd.h | 459 - .../Inc/stm32f4xx_hal_pcd_ex.h | 88 - .../Inc/stm32f4xx_hal_pwr_ex.h | 340 - .../Inc/stm32f4xx_hal_qspi.h | 750 - .../Inc/stm32f4xx_hal_rcc.h | 1459 -- .../Inc/stm32f4xx_hal_rcc_ex.h | 7111 ------- .../Inc/stm32f4xx_hal_rng.h | 361 - .../Inc/stm32f4xx_hal_rtc.h | 915 - .../Inc/stm32f4xx_hal_rtc_ex.h | 1079 -- .../Inc/stm32f4xx_hal_sai.h | 895 - .../Inc/stm32f4xx_hal_sai_ex.h | 114 - .../Inc/stm32f4xx_hal_sdram.h | 238 - .../Inc/stm32f4xx_hal_smbus.h | 731 - .../Inc/stm32f4xx_hal_spdifrx.h | 604 - .../Inc/stm32f4xx_ll_bus.h | 2105 --- .../Inc/stm32f4xx_ll_dma.h | 2868 --- .../Inc/stm32f4xx_ll_dma2d.h | 1901 -- .../Inc/stm32f4xx_ll_fmc.h | 1416 -- .../Inc/stm32f4xx_ll_fmpi2c.h | 2234 --- .../Inc/stm32f4xx_ll_gpio.h | 981 - .../Inc/stm32f4xx_ll_lptim.h | 1378 -- .../Inc/stm32f4xx_ll_pwr.h | 985 - .../Inc/stm32f4xx_ll_rcc.h | 7096 ------- .../Inc/stm32f4xx_ll_rng.h | 335 - .../Inc/stm32f4xx_ll_rtc.h | 3663 ---- .../Inc/stm32f4xx_ll_system.h | 1711 -- .../Src/stm32f4xx_hal_adc.c | 2110 --- .../Src/stm32f4xx_hal_adc_ex.c | 1112 -- .../Src/stm32f4xx_hal_cryp.c | 7132 ------- .../Src/stm32f4xx_hal_cryp_ex.c | 680 - .../Src/stm32f4xx_hal_dcmi.c | 1161 -- .../Src/stm32f4xx_hal_dcmi_ex.c | 182 - .../Src/stm32f4xx_hal_dfsdm.c | 4423 ----- .../Src/stm32f4xx_hal_dma.c | 1305 -- .../Src/stm32f4xx_hal_dma2d.c | 2126 --- .../Src/stm32f4xx_hal_dma_ex.c | 313 - .../Src/stm32f4xx_hal_dsi.c | 2760 --- .../Src/stm32f4xx_hal_eth.c | 3220 ---- .../Src/stm32f4xx_hal_flash.c | 775 - .../Src/stm32f4xx_hal_flash_ex.c | 1347 -- .../Src/stm32f4xx_hal_flash_ramfunc.c | 172 - .../Src/stm32f4xx_hal_fmpi2c.c | 6864 ------- .../Src/stm32f4xx_hal_fmpi2c_ex.c | 258 - .../Src/stm32f4xx_hal_fmpsmbus.c | 2749 --- .../Src/stm32f4xx_hal_fmpsmbus_ex.c | 145 - .../Src/stm32f4xx_hal_gpio.c | 533 - .../Src/stm32f4xx_hal_hash.c | 3514 ---- .../Src/stm32f4xx_hal_hash_ex.c | 1040 -- .../Src/stm32f4xx_hal_i2c_ex.c | 182 - .../Src/stm32f4xx_hal_i2s_ex.c | 1135 -- .../Src/stm32f4xx_hal_lptim.c | 2484 --- .../Src/stm32f4xx_hal_ltdc.c | 2215 --- .../Src/stm32f4xx_hal_ltdc_ex.c | 151 - .../Src/stm32f4xx_hal_pcd_ex.c | 341 - .../Src/stm32f4xx_hal_pwr_ex.c | 600 - .../Src/stm32f4xx_hal_qspi.c | 2915 --- .../Src/stm32f4xx_hal_rcc.c | 1124 -- .../Src/stm32f4xx_hal_rcc_ex.c | 3784 ---- .../Src/stm32f4xx_hal_rng.c | 867 - .../Src/stm32f4xx_hal_rtc.c | 1896 -- .../Src/stm32f4xx_hal_rtc_ex.c | 1878 -- .../Src/stm32f4xx_hal_sai.c | 2554 --- .../Src/stm32f4xx_hal_sai_ex.c | 310 - .../Src/stm32f4xx_hal_sdram.c | 1308 -- .../Src/stm32f4xx_hal_smbus.c | 2784 --- .../Src/stm32f4xx_hal_spdifrx.c | 1627 -- ...m32f4xx_hal_timebase_rtc_wakeup_template.c | 293 - .../Src/stm32f4xx_ll_dma.c | 423 - .../Src/stm32f4xx_ll_dma2d.c | 594 - .../Src/stm32f4xx_ll_fmc.c | 1498 -- .../Src/stm32f4xx_ll_fmpi2c.c | 217 - .../Src/stm32f4xx_ll_gpio.c | 303 - .../Src/stm32f4xx_ll_lptim.c | 301 - .../Src/stm32f4xx_ll_rcc.c | 1660 -- .../Src/stm32f4xx_ll_rng.c | 111 - .../Src/stm32f4xx_ll_rtc.c | 838 - .../Src/stm32f4xx_ll_utils.c | 749 - .../stm32f4xx_matlab_gpio.c | 81 - .../stm32f4xx_matlab_gpio.h | 32 - .../STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.c | 8 - .../STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.h | 58 - .../STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.h | 158 - .../stm32f4xx_periph_registers.c | 126 - MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.c | 347 - MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.h | 161 - MCU_Wrapper/mcu_wrapper_conf.h | 2 +- 312 files changed, 173574 insertions(+), 174744 deletions(-) delete mode 100644 Code/Core/Inc/gpio.h delete mode 100644 Code/Core/Inc/main.h delete mode 100644 Code/Core/Inc/stm32f4xx_hal_conf.h delete mode 100644 Code/Core/Inc/stm32f4xx_it.h delete mode 100644 Code/Core/Inc/trace.h delete mode 100644 Code/Core/Src/gpio.c delete mode 100644 Code/Core/Src/main.c delete mode 100644 Code/Core/Src/stm32f4xx_hal_msp.c delete mode 100644 Code/Core/Src/stm32f4xx_it.c delete mode 100644 Code/Core/Src/system_stm32f4xx.c delete mode 100644 Code/GENERAL/gpio_general.c delete mode 100644 Code/GENERAL/gpio_general.h delete mode 100644 Code/GENERAL/periph_general.h delete mode 100644 Code/GENERAL/tim_general.c delete mode 100644 Code/GENERAL/tim_general.h delete mode 100644 Code/GENERAL/uart_general.c delete mode 100644 Code/GENERAL/uart_general.h delete mode 100644 Code/Modbus/crc_algs.c delete mode 100644 Code/Modbus/crc_algs.h delete mode 100644 Code/Modbus/modbus.c delete mode 100644 Code/Modbus/modbus.h delete mode 100644 Code/Modbus/modbus_data.h delete mode 100644 Code/Modbus/rs_message.c delete mode 100644 Code/Modbus/rs_message.h delete mode 100644 Code/PWM/control.c delete mode 100644 Code/PWM/control.h delete mode 100644 Code/PWM/pwm.c delete mode 100644 Code/PWM/pwm.h delete mode 100644 Code/PWM/settings.c delete mode 100644 Code/PWM/settings.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f100xb_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f100xe_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f101x6_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f101xb_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f101xe_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f101xg_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f102x6_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f102xb_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f103x6_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f103xb_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f103xe_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f103xg_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f105xc_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f107xc_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f1xx.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/system_stm32f1xx.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/arm_defines.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm1_matlab.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm3_matlab.h rename {MCU_STM32F4xx_Matlab => MCU_STM32F1xx_Matlab}/Drivers/CMSIS/core_cm4_matlab.h (97%) rename {MCU_STM32F4xx_Matlab => MCU_STM32F1xx_Matlab}/Drivers/CMSIS/stdint.h (100%) rename {MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver}/Inc/Legacy/stm32_hal_legacy.h (91%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_can_legacy.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h (66%) rename {MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver}/Inc/stm32_assert_template.h (70%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h (98%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h (63%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h (96%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_crc.h (87%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac.h (84%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac_ex.h (60%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h (71%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_eth_legacy.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_eth.h (89%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h (54%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h (55%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_hcd.h (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h (98%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2s.h (81%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_irda.h (95%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h (90%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_mmc.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_mmc.h (96%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nand.h (92%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nor.h (89%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pccard.h (90%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h (56%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sd.h (98%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_smartcard.h (96%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sram.h (86%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h (97%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h (54%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_usart.h (91%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_wwdg.h (93%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_adc.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_adc.h (61%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h (95%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_crc.h (88%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dac.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dac.h (86%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h (86%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_fsmc.h (79%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h (92%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_iwdg.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_iwdg.h (93%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rtc.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_sdmmc.h (97%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h (94%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h (93%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h (95%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h (68%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h (65%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_wwdg.h => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_wwdg.h (93%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c (61%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_can.c (97%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c (55%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c (87%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_crc.c (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac.c (92%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac_ex.c (95%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_eth.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c (91%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_hcd.c (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2s.c (86%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_irda.c (96%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c (93%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_mmc.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c (86%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_msp_template.c (50%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nand.c (92%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nor.c (89%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pccard.c (91%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c (71%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c (52%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c (95%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_smartcard.c (96%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c (92%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c (93%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c (89%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_rtc_alarm_template.c (63%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_tim_template.c (68%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c (91%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_usart.c (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_wwdg.c (94%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_adc.c (78%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_crc.c (71%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dac.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dac.c (89%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c (91%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c (81%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_i2c.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c (78%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_pwr.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c (74%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rtc.c rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_sdmmc.c (95%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c (81%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_tim.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c (96%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c (79%) rename MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c (63%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.c create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.h rename MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.c => MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.c (60%) create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.h create mode 100644 MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_periph_registers.c create mode 100644 MCU_STM32F1xx_Matlab/stm32_defs.h create mode 100644 MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.c create mode 100644 MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/CMSIS/arm_defines.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/CMSIS/stm32f407xx_matlab.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/CMSIS/stm32f407xx_matlab_memory.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/CMSIS/stm32f4xx.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/CMSIS/system_stm32f4xx.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dfsdm.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_lptim.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smbus.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmpi2c.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_lptim.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rng.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rtc.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dfsdm.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dsi.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_lptim.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smbus.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma2d.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmpi2c.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_lptim.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rng.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rtc.c delete mode 100644 MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c delete mode 100644 MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.c delete mode 100644 MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.h delete mode 100644 MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.c delete mode 100644 MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.h delete mode 100644 MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.h delete mode 100644 MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_periph_registers.c delete mode 100644 MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.c delete mode 100644 MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.h diff --git a/Code/Core/Inc/gpio.h b/Code/Core/Inc/gpio.h deleted file mode 100644 index 708bac7..0000000 --- a/Code/Core/Inc/gpio.h +++ /dev/null @@ -1,49 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file gpio.h - * @brief This file contains all the function prototypes for - * the gpio.c file - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __GPIO_H__ -#define __GPIO_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -void MX_GPIO_Init(void); - -/* USER CODE BEGIN Prototypes */ - -/* USER CODE END Prototypes */ - -#ifdef __cplusplus -} -#endif -#endif /*__ GPIO_H__ */ - diff --git a/Code/Core/Inc/main.h b/Code/Core/Inc/main.h deleted file mode 100644 index a46bccd..0000000 --- a/Code/Core/Inc/main.h +++ /dev/null @@ -1,69 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.h - * @brief : Header for main.c file. - * This file contains the common defines of the application. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void Error_Handler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -/* Private defines -----------------------------------------------------------*/ - -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -#ifdef __cplusplus -} -#endif - -#endif /* __MAIN_H */ diff --git a/Code/Core/Inc/stm32f4xx_hal_conf.h b/Code/Core/Inc/stm32f4xx_hal_conf.h deleted file mode 100644 index c965b7e..0000000 --- a/Code/Core/Inc/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,495 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32f4xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - - /* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ - #define HAL_DAC_MODULE_ENABLED -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_ETH_LEGACY_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ - #define HAL_TIM_MODULE_ENABLED - #define HAL_UART_MODULE_ENABLED - #define HAL_USART_MODULE_ENABLED -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_FMPSMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_ETH_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_eth_legacy.h" -#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_FMPSMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_fmpsmbus.h" -#endif /* HAL_FMPSMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ diff --git a/Code/Core/Inc/stm32f4xx_it.h b/Code/Core/Inc/stm32f4xx_it.h deleted file mode 100644 index 9716374..0000000 --- a/Code/Core/Inc/stm32f4xx_it.h +++ /dev/null @@ -1,66 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_it.h - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_IT_H -#define __STM32F4xx_IT_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_IT_H */ diff --git a/Code/Core/Inc/trace.h b/Code/Core/Inc/trace.h deleted file mode 100644 index c483916..0000000 --- a/Code/Core/Inc/trace.h +++ /dev/null @@ -1,90 +0,0 @@ -// TRACE SETTINGS - -#define TRACE_MB_UART_ENABLE 14 -//#define TRACE_MB_TIM_ENABLE 15 -#define TRACE_TIM_PWM_ENABLE 15 -//#define TRACE_PWM_REINIT_ENABLE 15 -//#define TRACE_TIM_DEAD_TIME_ENABLE 14 -//#define TRACE_TIM_CTRL_ENABLE 15 - - -#define TRACE_GPIO_ENTER(_gpio_,_pin_) (_gpio_)->BSRR = (1<<(_pin_)) -#define TRACE_GPIO_EXIT(_gpio_,_pin_) (_gpio_)->BSRR = (1<<((_pin_)+16)) - -#ifdef TRACE_MB_UART_ENABLE - #define Trace_MB_UART_Enter() TRACE_GPIO_ENTER(GPIOD, TRACE_MB_UART_ENABLE) - #define Trace_MB_UART_Exit() TRACE_GPIO_EXIT(GPIOD, TRACE_MB_UART_ENABLE) -#endif -#ifdef TRACE_MB_TIM_ENABLE - #define Trace_MB_TIM_Enter() TRACE_GPIO_ENTER(GPIOD, TRACE_MB_TIM_ENABLE) - #define Trace_MB_TIM_Exit() TRACE_GPIO_EXIT(GPIOD, TRACE_MB_TIM_ENABLE) -#endif - - -#ifdef TRACE_TIM_PWM_ENABLE - #define Trace_PWM_TIM_Enter() TRACE_GPIO_ENTER(GPIOD, TRACE_TIM_PWM_ENABLE) - #define Trace_PWM_TIM_Exit() TRACE_GPIO_EXIT(GPIOD, TRACE_TIM_PWM_ENABLE) -#endif -#ifdef TRACE_PWM_REINIT_ENABLE - #define Trace_PWM_reInit_Enter() TRACE_GPIO_ENTER(GPIOD, TRACE_PWM_REINIT_ENABLE) - #define Trace_PWM_reInit_Exit() TRACE_GPIO_EXIT(GPIOD, TRACE_PWM_REINIT_ENABLE) -#endif -#ifdef TRACE_TIM_DEAD_TIME_ENABLE - #define Trace_PWM_DeadTime_Enter() TRACE_GPIO_ENTER(GPIOD, TRACE_TIM_DEAD_TIME_ENABLE) - #define Trace_PWM_DeadTime_Exit() TRACE_GPIO_EXIT(GPIOD, TRACE_TIM_DEAD_TIME_ENABLE) -#endif - -#ifdef TRACE_TIM_CTRL_ENABLE - #define Trace_CTRL_TIM_Enter() TRACE_GPIO_ENTER(GPIOD, TRACE_TIM_CTRL_ENABLE) - #define Trace_CTRL_TIM_Exit() TRACE_GPIO_EXIT(GPIOD, TRACE_TIM_CTRL_ENABLE) -#endif - - -#ifndef Trace_MB_UART_Enter - #define Trace_MB_UART_Enter() -#endif - -#ifndef Trace_MB_UART_Exit - #define Trace_MB_UART_Exit() -#endif - -#ifndef Trace_MB_TIM_Enter - #define Trace_MB_TIM_Enter() -#endif - -#ifndef Trace_MB_TIM_Exit - #define Trace_MB_TIM_Exit() -#endif - -#ifndef Trace_PWM_TIM_Enter - #define Trace_PWM_TIM_Enter() -#endif - -#ifndef Trace_PWM_TIM_Exit - #define Trace_PWM_TIM_Exit() -#endif - -#ifndef Trace_CTRL_TIM_Enter - #define Trace_CTRL_TIM_Enter() -#endif - -#ifndef Trace_CTRL_TIM_Exit - #define Trace_CTRL_TIM_Exit() -#endif - - -#ifndef Trace_PWM_reInit_Enter - #define Trace_PWM_reInit_Enter() -#endif - -#ifndef Trace_PWM_reInit_Exit - #define Trace_PWM_reInit_Exit() -#endif - -#ifndef Trace_PWM_DeadTime_Enter - #define Trace_PWM_DeadTime_Enter() -#endif - -#ifndef Trace_PWM_DeadTime_Exit - #define Trace_PWM_DeadTime_Exit() -#endif \ No newline at end of file diff --git a/Code/Core/Src/gpio.c b/Code/Core/Src/gpio.c deleted file mode 100644 index 1f922f8..0000000 --- a/Code/Core/Src/gpio.c +++ /dev/null @@ -1,61 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file gpio.c - * @brief This file provides code for the configuration - * of all used GPIO pins. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "gpio.h" - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/*----------------------------------------------------------------------------*/ -/* Configure GPIO */ -/*----------------------------------------------------------------------------*/ -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/** Configure pins as - * Analog - * Input - * Output - * EVENT_OUT - * EXTI -*/ -void MX_GPIO_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - - /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOH_CLK_ENABLE(); - - __HAL_RCC_GPIOD_CLK_ENABLE(); - - /*Configure GPIO pin : PC13 */ - GPIO_InitStruct.Pin = GPIO_PIN_15 | GPIO_PIN_14 | GPIO_PIN_13 | GPIO_PIN_12; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); -} - -/* USER CODE BEGIN 2 */ - -/* USER CODE END 2 */ diff --git a/Code/Core/Src/main.c b/Code/Core/Src/main.c deleted file mode 100644 index eafa273..0000000 --- a/Code/Core/Src/main.c +++ /dev/null @@ -1,256 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.c - * @brief : Main program body - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "gpio.h" -#include "math.h" -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ -#include "pwm.h" -#include "rs_message.h" -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN PTD */ -UART_SettingsTypeDef modbus1_suart; -TIM_SettingsTypeDef modbus1_stim; -RS_HandleTypeDef hmodbus1; -RS_MsgTypeDef MODBUS_MSG; -/* USER CODE END PTD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ - -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -void SystemClock_Config(void); -/* USER CODE BEGIN PFP */ -//MODBUS_HandleTypeDef hmodbus1; -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ -/** - * @brief reInitialize Peripheral. - * @note Данная функция необходима, если запрос на реинициализацию приходит от другой периферии. - * И чтобы не реинициализировать периферию в прерывании, она реинится в main while(1). - */ -void Periph_reInit(void) -{ - // wait for reinit modbus coil (requested by modbus interrupt) - if(MB_Read_Coil_Global(COIL_UART_CTRL_GLOBAL, NULL) && hmodbus1.fTX_Done) - { - MB_Write_Coil_Global(COIL_UART_CTRL_GLOBAL, RESET_COIL); - modbus1_suart.huart.Init.BaudRate = uart_ctrl[R_UART_CTRL_SPEED]; - RS_ReInit_UART(&hmodbus1 ,&modbus1_suart); - } - - // fait for reinit log timer (requested by modbus interrupt) - if((TIM_CTRL.sTimFreqHz != log_ctrl[R_LOG_CTRL_LOG_HZ]) && (log_ctrl[R_LOG_CTRL_LOG_HZ] != 0)) - { - TIM_CTRL.sTimFreqHz = log_ctrl[R_LOG_CTRL_LOG_HZ]; - // clear logs params - Set_Log_Params(); - TIM_Base_MspDeInit(&TIM_CTRL.htim); - Control_Timer_ReInit(&TIM_CTRL); - } - - // READ TIM_PWM_HZ - if(hpwm1.stim.sTimFreqHz != pwm_ctrl[R_PWM_CTRL_PWM_HZ]) - { - hpwm1.stim.sTimFreqHz = pwm_ctrl[R_PWM_CTRL_PWM_HZ]; - pwm_ctrl[R_PWM_CTRL_PWM_HZ] = hpwm1.stim.sTimFreqHz; - // update logs params - Set_Log_Params(); - // reinit tim - PWM_Sine_ReInit(&hpwm1); - PWM_SlavePhase_reInit(&hpwm2); - PWM_SlavePhase_reInit(&hpwm3); - } -} - -/* USER CODE END 0 */ - -/** - * @brief The application entry point. - * @retval int - */ -int main(void) - { - /* USER CODE BEGIN 1 */ - __HAL_DBGMCU_FREEZE_TIM1(); - __HAL_DBGMCU_FREEZE_TIM3(); - __HAL_DBGMCU_FREEZE_TIM4(); - __HAL_DBGMCU_FREEZE_TIM12(); - // 0xE0042008 - /* USER CODE END 1 */ - - /* MCU Configuration--------------------------------------------------------*/ - - /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ - HAL_Init(); - - /* USER CODE BEGIN Init */ - - /* USER CODE END Init */ - - /* Configure the system clock */ - //SystemClock_Config(); - - /* USER CODE BEGIN SysInit */ - - /* USER CODE END SysInit */ - - /* Initialize all configured peripherals */ - MX_GPIO_Init(); - /* USER CODE BEGIN 2 */ - - - /* USER CODE END 2 */ - - /* Infinite loop */ - /* USER CODE BEGIN WHILE */ - - // init params for pwm and log - pwm_ctrl[R_PWM_CTRL_PWM_VALUE] = 2560; - pwm_ctrl[R_PWM_CTRL_PWM_HZ] = HZ_TIMER_PWM; - pwm_ctrl[R_PWM_CTRL_MIN_PULSE_DUR] = 30; - pwm_ctrl[R_PWM_CTRL_DEAD_TIME] = 1; - pwm_ctrl[R_PWM_CTRL_SIN_TABLE_SIZE] = SIN_TABLE_SIZE_MAX; - //MB_Write_Coil_Global(COIL_PWM_DC_MODE_GLOBAL, SET_COIL); - MB_Write_Coil_Global(COIL_PWM_CH_MODE_GLOBAL, SET_COIL); - MB_Write_Coil_Global(COIL_PWM_PHASE_MODE_GLOBAL, SET_COIL); - - log_ctrl[R_LOG_CTRL_LOG_HZ] = HZ_TIMER_CTRL; - log_ctrl[R_LOG_CTRL_LOG_SIZE] = 50; - log_ctrl[R_LOG_CTRL_LOG_PWM_NUMB] = 3; - - WriteSettingsToMem(); - MODBUS_FirstInit(); - Control_Timer_FirstInit(); - PWM_Sine_FirstInit(); - - //---------------TEST MODBUS------------------ -// MODBUS_Transmit_IT(&hmodbus1, &MODBUS_MSG); - //RS_Receive_IT(&hmodbus1, &MODBUS_MSG); - - while (1) - { - /* USER CODE END WHILE */ - Periph_reInit(); - /* USER CODE BEGIN 3 */ -// HAL_Delay(200); -// MB_Toogle_Coil_Local(&GPIOD->ODR, COIL_GPIOD_LED3); - } - /* USER CODE END 3 */ -} - -/** - * @brief System Clock Configuration - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - - /** Configure the main internal regulator output voltage - */ - __HAL_RCC_PWR_CLK_ENABLE(); - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /** Initializes the RCC Oscillators according to the specified parameters - * in the RCC_OscInitTypeDef structure. - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLM = 8; - RCC_OscInitStruct.PLL.PLLN = 72; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 4; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } - - /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) - { - Error_Handler(); - } -} - -/* USER CODE BEGIN 4 */ - -/* USER CODE END 4 */ - -/** - * @brief This function is executed in case of error occurrence. - * @retval None - */ -void Error_Handler(void) -{ - /* USER CODE BEGIN Error_Handler_Debug */ - /* User can add his own implementation to report the HAL error return state */ - __disable_irq(); - while (1) - { - } - /* USER CODE END Error_Handler_Debug */ -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ diff --git a/Code/Core/Src/stm32f4xx_hal_msp.c b/Code/Core/Src/stm32f4xx_hal_msp.c deleted file mode 100644 index dca326c..0000000 --- a/Code/Core/Src/stm32f4xx_hal_msp.c +++ /dev/null @@ -1,81 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_hal_msp.c - * @brief This file provides code for the MSP Initialization - * and de-Initialization codes. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN Define */ - -/* USER CODE END Define */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN Macro */ - -/* USER CODE END Macro */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* External functions --------------------------------------------------------*/ -/* USER CODE BEGIN ExternalFunctions */ - -/* USER CODE END ExternalFunctions */ - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ -/** - * Initializes the Global MSP. - */ -void HAL_MspInit(void) -{ - /* USER CODE BEGIN MspInit 0 */ - - /* USER CODE END MspInit 0 */ - - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_RCC_PWR_CLK_ENABLE(); - - /* System interrupt init*/ - - /* USER CODE BEGIN MspInit 1 */ - - /* USER CODE END MspInit 1 */ -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ diff --git a/Code/Core/Src/stm32f4xx_it.c b/Code/Core/Src/stm32f4xx_it.c deleted file mode 100644 index d118550..0000000 --- a/Code/Core/Src/stm32f4xx_it.c +++ /dev/null @@ -1,205 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f4xx_it.h" -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* External variables --------------------------------------------------------*/ - -/* USER CODE BEGIN EV */ - -/* USER CODE END EV */ - -/******************************************************************************/ -/* Cortex-M4 Processor Interruption and Exception Handlers */ -/******************************************************************************/ -/** - * @brief This function handles Non maskable interrupt. - */ -void NMI_Handler(void) -{ - /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ - - /* USER CODE END NonMaskableInt_IRQn 0 */ - /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - while (1) - { - } - /* USER CODE END NonMaskableInt_IRQn 1 */ -} - -/** - * @brief This function handles Hard fault interrupt. - */ -void HardFault_Handler(void) -{ - /* USER CODE BEGIN HardFault_IRQn 0 */ - - /* USER CODE END HardFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_HardFault_IRQn 0 */ - return; - /* USER CODE END W1_HardFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Memory management fault. - */ -void MemManage_Handler(void) -{ - /* USER CODE BEGIN MemoryManagement_IRQn 0 */ - - /* USER CODE END MemoryManagement_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ - /* USER CODE END W1_MemoryManagement_IRQn 0 */ - } -} - -/** - * @brief This function handles Pre-fetch fault, memory access fault. - */ -void BusFault_Handler(void) -{ - /* USER CODE BEGIN BusFault_IRQn 0 */ - - /* USER CODE END BusFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_BusFault_IRQn 0 */ - /* USER CODE END W1_BusFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Undefined instruction or illegal state. - */ -void UsageFault_Handler(void) -{ - /* USER CODE BEGIN UsageFault_IRQn 0 */ - - /* USER CODE END UsageFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ - /* USER CODE END W1_UsageFault_IRQn 0 */ - } -} - -/** - * @brief This function handles System service call via SWI instruction. - */ -void SVC_Handler(void) -{ - /* USER CODE BEGIN SVCall_IRQn 0 */ - - /* USER CODE END SVCall_IRQn 0 */ - /* USER CODE BEGIN SVCall_IRQn 1 */ - - /* USER CODE END SVCall_IRQn 1 */ -} - -/** - * @brief This function handles Debug monitor. - */ -void DebugMon_Handler(void) -{ - /* USER CODE BEGIN DebugMonitor_IRQn 0 */ - - /* USER CODE END DebugMonitor_IRQn 0 */ - /* USER CODE BEGIN DebugMonitor_IRQn 1 */ - - /* USER CODE END DebugMonitor_IRQn 1 */ -} - -/** - * @brief This function handles Pendable request for system service. - */ -void PendSV_Handler(void) -{ - /* USER CODE BEGIN PendSV_IRQn 0 */ - - /* USER CODE END PendSV_IRQn 0 */ - /* USER CODE BEGIN PendSV_IRQn 1 */ - - /* USER CODE END PendSV_IRQn 1 */ -} - -/** - * @brief This function handles System tick timer. - */ -void SysTick_Handler(void) -{ - /* USER CODE BEGIN SysTick_IRQn 0 */ - - /* USER CODE END SysTick_IRQn 0 */ - HAL_IncTick(); - /* USER CODE BEGIN SysTick_IRQn 1 */ - - /* USER CODE END SysTick_IRQn 1 */ -} - -/******************************************************************************/ -/* STM32F4xx Peripheral Interrupt Handlers */ -/* Add here the Interrupt Handlers for the used peripherals. */ -/* For the available peripheral interrupt handler names, */ -/* please refer to the startup file (startup_stm32f4xx.s). */ -/******************************************************************************/ - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ diff --git a/Code/Core/Src/system_stm32f4xx.c b/Code/Core/Src/system_stm32f4xx.c deleted file mode 100644 index 3bd40f7..0000000 --- a/Code/Core/Src/system_stm32f4xx.c +++ /dev/null @@ -1,747 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f4xx.c - * @author MCD Application Team - * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. - * - * This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f4xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f4xx_system - * @{ - */ - -/** @addtogroup STM32F4xx_System_Private_Includes - * @{ - */ - - -#include "stm32f4xx.h" - -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Defines - * @{ - */ - -/************************* Miscellaneous Configuration ************************/ -/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ - || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ - || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) -/* #define DATA_IN_ExtSRAM */ -#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\ - STM32F412Zx || STM32F412Vx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ - || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/* #define DATA_IN_ExtSDRAM */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ - STM32F479xx */ - -/* Note: Following vector table addresses must be defined in line with linker - configuration. */ -/*!< Uncomment the following line if you need to relocate the vector table - anywhere in Flash or Sram, else the vector table is kept at the automatic - remap of boot address selected */ -/* #define USER_VECT_TAB_ADDRESS */ - -#if defined(USER_VECT_TAB_ADDRESS) -/*!< Uncomment the following line if you need to relocate your vector Table - in Sram else user remap will be done in Flash. */ -/* #define VECT_TAB_SRAM */ -#if defined(VECT_TAB_SRAM) -#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. - This value must be a multiple of 0x200. */ -#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ -#else -#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. - This value must be a multiple of 0x200. */ -#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ -#endif /* VECT_TAB_SRAM */ -#endif /* USER_VECT_TAB_ADDRESS */ -/******************************************************************************/ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Variables - * @{ - */ - /* This variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetHCLKFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock; then there - is no need to call the 2 first functions listed above, since SystemCoreClock - variable is updated automatically. - */ -uint32_t SystemCoreClock = 16000000; -const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes - * @{ - */ - -#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the FPU setting, vector table location and External memory - * configuration. - * @param None - * @retval None - */ -void SystemInit(void) -{ - /* FPU settings ------------------------------------------------------------*/ - #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ - #endif - -#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) - SystemInit_ExtMemCtl(); -#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ - - /* Configure the Vector Table location -------------------------------------*/ -#if defined(USER_VECT_TAB_ADDRESS) - SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ -#endif /* USER_VECT_TAB_ADDRESS */ -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value - * depends on the application requirements), user has to ensure that HSE_VALUE - * is same as the real frequency of the crystal used. Otherwise, this function - * may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @param None - * @retval None - */ -void SystemCoreClockUpdate(void) -{ - uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock source */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock source */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock source */ - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N - SYSCLK = PLL_VCO / PLL_P - */ - pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - - if (pllsource != 0) - { - /* HSE used as PLL clock source */ - pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - - pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; - SystemCoreClock = pllvco/pllp; - break; - default: - SystemCoreClock = HSI_VALUE; - break; - } - /* Compute HCLK frequency --------------------------------------------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK frequency */ - SystemCoreClock >>= tmp; -} - -#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM) -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ - || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f4xx.s before jump to main. - * This function configures the external memories (SRAM/SDRAM) - * This SRAM/SDRAM will be used as program data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ - __IO uint32_t tmp = 0x00; - - register uint32_t tmpreg = 0, timeout = 0xFFFF; - register __IO uint32_t index; - - /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */ - RCC->AHB1ENR |= 0x000001F8; - - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); - - /* Connect PDx pins to FMC Alternate function */ - GPIOD->AFR[0] = 0x00CCC0CC; - GPIOD->AFR[1] = 0xCCCCCCCC; - /* Configure PDx pins in Alternate function mode */ - GPIOD->MODER = 0xAAAA0A8A; - /* Configure PDx pins speed to 100 MHz */ - GPIOD->OSPEEDR = 0xFFFF0FCF; - /* Configure PDx pins Output type to push-pull */ - GPIOD->OTYPER = 0x00000000; - /* No pull-up, pull-down for PDx pins */ - GPIOD->PUPDR = 0x00000000; - - /* Connect PEx pins to FMC Alternate function */ - GPIOE->AFR[0] = 0xC00CC0CC; - GPIOE->AFR[1] = 0xCCCCCCCC; - /* Configure PEx pins in Alternate function mode */ - GPIOE->MODER = 0xAAAA828A; - /* Configure PEx pins speed to 100 MHz */ - GPIOE->OSPEEDR = 0xFFFFC3CF; - /* Configure PEx pins Output type to push-pull */ - GPIOE->OTYPER = 0x00000000; - /* No pull-up, pull-down for PEx pins */ - GPIOE->PUPDR = 0x00000000; - - /* Connect PFx pins to FMC Alternate function */ - GPIOF->AFR[0] = 0xCCCCCCCC; - GPIOF->AFR[1] = 0xCCCCCCCC; - /* Configure PFx pins in Alternate function mode */ - GPIOF->MODER = 0xAA800AAA; - /* Configure PFx pins speed to 50 MHz */ - GPIOF->OSPEEDR = 0xAA800AAA; - /* Configure PFx pins Output type to push-pull */ - GPIOF->OTYPER = 0x00000000; - /* No pull-up, pull-down for PFx pins */ - GPIOF->PUPDR = 0x00000000; - - /* Connect PGx pins to FMC Alternate function */ - GPIOG->AFR[0] = 0xCCCCCCCC; - GPIOG->AFR[1] = 0xCCCCCCCC; - /* Configure PGx pins in Alternate function mode */ - GPIOG->MODER = 0xAAAAAAAA; - /* Configure PGx pins speed to 50 MHz */ - GPIOG->OSPEEDR = 0xAAAAAAAA; - /* Configure PGx pins Output type to push-pull */ - GPIOG->OTYPER = 0x00000000; - /* No pull-up, pull-down for PGx pins */ - GPIOG->PUPDR = 0x00000000; - - /* Connect PHx pins to FMC Alternate function */ - GPIOH->AFR[0] = 0x00C0CC00; - GPIOH->AFR[1] = 0xCCCCCCCC; - /* Configure PHx pins in Alternate function mode */ - GPIOH->MODER = 0xAAAA08A0; - /* Configure PHx pins speed to 50 MHz */ - GPIOH->OSPEEDR = 0xAAAA08A0; - /* Configure PHx pins Output type to push-pull */ - GPIOH->OTYPER = 0x00000000; - /* No pull-up, pull-down for PHx pins */ - GPIOH->PUPDR = 0x00000000; - - /* Connect PIx pins to FMC Alternate function */ - GPIOI->AFR[0] = 0xCCCCCCCC; - GPIOI->AFR[1] = 0x00000CC0; - /* Configure PIx pins in Alternate function mode */ - GPIOI->MODER = 0x0028AAAA; - /* Configure PIx pins speed to 50 MHz */ - GPIOI->OSPEEDR = 0x0028AAAA; - /* Configure PIx pins Output type to push-pull */ - GPIOI->OTYPER = 0x00000000; - /* No pull-up, pull-down for PIx pins */ - GPIOI->PUPDR = 0x00000000; - -/*-- FMC Configuration -------------------------------------------------------*/ - /* Enable the FMC interface clock */ - RCC->AHB3ENR |= 0x00000001; - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); - - FMC_Bank5_6->SDCR[0] = 0x000019E4; - FMC_Bank5_6->SDTR[0] = 0x01115351; - - /* SDRAM initialization sequence */ - /* Clock enable command */ - FMC_Bank5_6->SDCMR = 0x00000011; - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* Delay */ - for (index = 0; index<1000; index++); - - /* PALL command */ - FMC_Bank5_6->SDCMR = 0x00000012; - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - timeout = 0xFFFF; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* Auto refresh command */ - FMC_Bank5_6->SDCMR = 0x00000073; - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - timeout = 0xFFFF; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* MRD register program */ - FMC_Bank5_6->SDCMR = 0x00046014; - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - timeout = 0xFFFF; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* Set refresh count */ - tmpreg = FMC_Bank5_6->SDRTR; - FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); - - /* Disable write protection */ - tmpreg = FMC_Bank5_6->SDCR[0]; - FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - /* Configure and enable Bank1_SRAM2 */ - FMC_Bank1->BTCR[2] = 0x00001011; - FMC_Bank1->BTCR[3] = 0x00000201; - FMC_Bank1E->BWTR[2] = 0x0fffffff; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -#if defined(STM32F469xx) || defined(STM32F479xx) - /* Configure and enable Bank1_SRAM2 */ - FMC_Bank1->BTCR[2] = 0x00001091; - FMC_Bank1->BTCR[3] = 0x00110212; - FMC_Bank1E->BWTR[2] = 0x0fffffff; -#endif /* STM32F469xx || STM32F479xx */ - - (void)(tmp); -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f4xx.s before jump to main. - * This function configures the external memories (SRAM/SDRAM) - * This SRAM/SDRAM will be used as program data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ - __IO uint32_t tmp = 0x00; -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ - || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#if defined (DATA_IN_ExtSDRAM) - register uint32_t tmpreg = 0, timeout = 0xFFFF; - register __IO uint32_t index; - -#if defined(STM32F446xx) - /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface - clock */ - RCC->AHB1ENR |= 0x0000007D; -#else - /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface - clock */ - RCC->AHB1ENR |= 0x000001F8; -#endif /* STM32F446xx */ - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); - -#if defined(STM32F446xx) - /* Connect PAx pins to FMC Alternate function */ - GPIOA->AFR[0] |= 0xC0000000; - GPIOA->AFR[1] |= 0x00000000; - /* Configure PDx pins in Alternate function mode */ - GPIOA->MODER |= 0x00008000; - /* Configure PDx pins speed to 50 MHz */ - GPIOA->OSPEEDR |= 0x00008000; - /* Configure PDx pins Output type to push-pull */ - GPIOA->OTYPER |= 0x00000000; - /* No pull-up, pull-down for PDx pins */ - GPIOA->PUPDR |= 0x00000000; - - /* Connect PCx pins to FMC Alternate function */ - GPIOC->AFR[0] |= 0x00CC0000; - GPIOC->AFR[1] |= 0x00000000; - /* Configure PDx pins in Alternate function mode */ - GPIOC->MODER |= 0x00000A00; - /* Configure PDx pins speed to 50 MHz */ - GPIOC->OSPEEDR |= 0x00000A00; - /* Configure PDx pins Output type to push-pull */ - GPIOC->OTYPER |= 0x00000000; - /* No pull-up, pull-down for PDx pins */ - GPIOC->PUPDR |= 0x00000000; -#endif /* STM32F446xx */ - - /* Connect PDx pins to FMC Alternate function */ - GPIOD->AFR[0] = 0x000000CC; - GPIOD->AFR[1] = 0xCC000CCC; - /* Configure PDx pins in Alternate function mode */ - GPIOD->MODER = 0xA02A000A; - /* Configure PDx pins speed to 50 MHz */ - GPIOD->OSPEEDR = 0xA02A000A; - /* Configure PDx pins Output type to push-pull */ - GPIOD->OTYPER = 0x00000000; - /* No pull-up, pull-down for PDx pins */ - GPIOD->PUPDR = 0x00000000; - - /* Connect PEx pins to FMC Alternate function */ - GPIOE->AFR[0] = 0xC00000CC; - GPIOE->AFR[1] = 0xCCCCCCCC; - /* Configure PEx pins in Alternate function mode */ - GPIOE->MODER = 0xAAAA800A; - /* Configure PEx pins speed to 50 MHz */ - GPIOE->OSPEEDR = 0xAAAA800A; - /* Configure PEx pins Output type to push-pull */ - GPIOE->OTYPER = 0x00000000; - /* No pull-up, pull-down for PEx pins */ - GPIOE->PUPDR = 0x00000000; - - /* Connect PFx pins to FMC Alternate function */ - GPIOF->AFR[0] = 0xCCCCCCCC; - GPIOF->AFR[1] = 0xCCCCCCCC; - /* Configure PFx pins in Alternate function mode */ - GPIOF->MODER = 0xAA800AAA; - /* Configure PFx pins speed to 50 MHz */ - GPIOF->OSPEEDR = 0xAA800AAA; - /* Configure PFx pins Output type to push-pull */ - GPIOF->OTYPER = 0x00000000; - /* No pull-up, pull-down for PFx pins */ - GPIOF->PUPDR = 0x00000000; - - /* Connect PGx pins to FMC Alternate function */ - GPIOG->AFR[0] = 0xCCCCCCCC; - GPIOG->AFR[1] = 0xCCCCCCCC; - /* Configure PGx pins in Alternate function mode */ - GPIOG->MODER = 0xAAAAAAAA; - /* Configure PGx pins speed to 50 MHz */ - GPIOG->OSPEEDR = 0xAAAAAAAA; - /* Configure PGx pins Output type to push-pull */ - GPIOG->OTYPER = 0x00000000; - /* No pull-up, pull-down for PGx pins */ - GPIOG->PUPDR = 0x00000000; - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ - || defined(STM32F469xx) || defined(STM32F479xx) - /* Connect PHx pins to FMC Alternate function */ - GPIOH->AFR[0] = 0x00C0CC00; - GPIOH->AFR[1] = 0xCCCCCCCC; - /* Configure PHx pins in Alternate function mode */ - GPIOH->MODER = 0xAAAA08A0; - /* Configure PHx pins speed to 50 MHz */ - GPIOH->OSPEEDR = 0xAAAA08A0; - /* Configure PHx pins Output type to push-pull */ - GPIOH->OTYPER = 0x00000000; - /* No pull-up, pull-down for PHx pins */ - GPIOH->PUPDR = 0x00000000; - - /* Connect PIx pins to FMC Alternate function */ - GPIOI->AFR[0] = 0xCCCCCCCC; - GPIOI->AFR[1] = 0x00000CC0; - /* Configure PIx pins in Alternate function mode */ - GPIOI->MODER = 0x0028AAAA; - /* Configure PIx pins speed to 50 MHz */ - GPIOI->OSPEEDR = 0x0028AAAA; - /* Configure PIx pins Output type to push-pull */ - GPIOI->OTYPER = 0x00000000; - /* No pull-up, pull-down for PIx pins */ - GPIOI->PUPDR = 0x00000000; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -/*-- FMC Configuration -------------------------------------------------------*/ - /* Enable the FMC interface clock */ - RCC->AHB3ENR |= 0x00000001; - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); - - /* Configure and enable SDRAM bank1 */ -#if defined(STM32F446xx) - FMC_Bank5_6->SDCR[0] = 0x00001954; -#else - FMC_Bank5_6->SDCR[0] = 0x000019E4; -#endif /* STM32F446xx */ - FMC_Bank5_6->SDTR[0] = 0x01115351; - - /* SDRAM initialization sequence */ - /* Clock enable command */ - FMC_Bank5_6->SDCMR = 0x00000011; - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* Delay */ - for (index = 0; index<1000; index++); - - /* PALL command */ - FMC_Bank5_6->SDCMR = 0x00000012; - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - timeout = 0xFFFF; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* Auto refresh command */ -#if defined(STM32F446xx) - FMC_Bank5_6->SDCMR = 0x000000F3; -#else - FMC_Bank5_6->SDCMR = 0x00000073; -#endif /* STM32F446xx */ - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - timeout = 0xFFFF; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* MRD register program */ -#if defined(STM32F446xx) - FMC_Bank5_6->SDCMR = 0x00044014; -#else - FMC_Bank5_6->SDCMR = 0x00046014; -#endif /* STM32F446xx */ - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - timeout = 0xFFFF; - while((tmpreg != 0) && (timeout-- > 0)) - { - tmpreg = FMC_Bank5_6->SDSR & 0x00000020; - } - - /* Set refresh count */ - tmpreg = FMC_Bank5_6->SDRTR; -#if defined(STM32F446xx) - FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1)); -#else - FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); -#endif /* STM32F446xx */ - - /* Disable write protection */ - tmpreg = FMC_Bank5_6->SDCR[0]; - FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); -#endif /* DATA_IN_ExtSDRAM */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ - || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ - || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) - -#if defined(DATA_IN_ExtSRAM) -/*-- GPIOs Configuration -----------------------------------------------------*/ - /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ - RCC->AHB1ENR |= 0x00000078; - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN); - - /* Connect PDx pins to FMC Alternate function */ - GPIOD->AFR[0] = 0x00CCC0CC; - GPIOD->AFR[1] = 0xCCCCCCCC; - /* Configure PDx pins in Alternate function mode */ - GPIOD->MODER = 0xAAAA0A8A; - /* Configure PDx pins speed to 100 MHz */ - GPIOD->OSPEEDR = 0xFFFF0FCF; - /* Configure PDx pins Output type to push-pull */ - GPIOD->OTYPER = 0x00000000; - /* No pull-up, pull-down for PDx pins */ - GPIOD->PUPDR = 0x00000000; - - /* Connect PEx pins to FMC Alternate function */ - GPIOE->AFR[0] = 0xC00CC0CC; - GPIOE->AFR[1] = 0xCCCCCCCC; - /* Configure PEx pins in Alternate function mode */ - GPIOE->MODER = 0xAAAA828A; - /* Configure PEx pins speed to 100 MHz */ - GPIOE->OSPEEDR = 0xFFFFC3CF; - /* Configure PEx pins Output type to push-pull */ - GPIOE->OTYPER = 0x00000000; - /* No pull-up, pull-down for PEx pins */ - GPIOE->PUPDR = 0x00000000; - - /* Connect PFx pins to FMC Alternate function */ - GPIOF->AFR[0] = 0x00CCCCCC; - GPIOF->AFR[1] = 0xCCCC0000; - /* Configure PFx pins in Alternate function mode */ - GPIOF->MODER = 0xAA000AAA; - /* Configure PFx pins speed to 100 MHz */ - GPIOF->OSPEEDR = 0xFF000FFF; - /* Configure PFx pins Output type to push-pull */ - GPIOF->OTYPER = 0x00000000; - /* No pull-up, pull-down for PFx pins */ - GPIOF->PUPDR = 0x00000000; - - /* Connect PGx pins to FMC Alternate function */ - GPIOG->AFR[0] = 0x00CCCCCC; - GPIOG->AFR[1] = 0x000000C0; - /* Configure PGx pins in Alternate function mode */ - GPIOG->MODER = 0x00085AAA; - /* Configure PGx pins speed to 100 MHz */ - GPIOG->OSPEEDR = 0x000CAFFF; - /* Configure PGx pins Output type to push-pull */ - GPIOG->OTYPER = 0x00000000; - /* No pull-up, pull-down for PGx pins */ - GPIOG->PUPDR = 0x00000000; - -/*-- FMC/FSMC Configuration --------------------------------------------------*/ - /* Enable the FMC/FSMC interface clock */ - RCC->AHB3ENR |= 0x00000001; - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); - /* Configure and enable Bank1_SRAM2 */ - FMC_Bank1->BTCR[2] = 0x00001011; - FMC_Bank1->BTCR[3] = 0x00000201; - FMC_Bank1E->BWTR[2] = 0x0fffffff; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -#if defined(STM32F469xx) || defined(STM32F479xx) - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); - /* Configure and enable Bank1_SRAM2 */ - FMC_Bank1->BTCR[2] = 0x00001091; - FMC_Bank1->BTCR[3] = 0x00110212; - FMC_Bank1E->BWTR[2] = 0x0fffffff; -#endif /* STM32F469xx || STM32F479xx */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\ - || defined(STM32F412Zx) || defined(STM32F412Vx) - /* Delay after an RCC peripheral clock enabling */ - tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN); - /* Configure and enable Bank1_SRAM2 */ - FSMC_Bank1->BTCR[2] = 0x00001011; - FSMC_Bank1->BTCR[3] = 0x00000201; - FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */ - -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */ - (void)(tmp); -} -#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/Code/GENERAL/gpio_general.c b/Code/GENERAL/gpio_general.c deleted file mode 100644 index d89e56e..0000000 --- a/Code/GENERAL/gpio_general.c +++ /dev/null @@ -1,31 +0,0 @@ -/**********************************TIM************************************** -Данный файл содержит базовые функции для инициализации портов. -***************************************************************************/ -#include "gpio_general.h" - - -//------------------------------------------------------------------- -//------------------------GPIO INIT FUNCTIONS------------------------ - -HAL_StatusTypeDef GPIO_Clock_Enable(GPIO_TypeDef *GPIOx) -{ - HAL_StatusTypeDef status = HAL_OK; - // choose port for enable clock - if (GPIOx==GPIOA) - __HAL_RCC_GPIOA_CLK_ENABLE(); - else if (GPIOx==GPIOB) - __HAL_RCC_GPIOB_CLK_ENABLE(); - else if (GPIOx==GPIOC) - __HAL_RCC_GPIOC_CLK_ENABLE(); - else if (GPIOx==GPIOD) - __HAL_RCC_GPIOD_CLK_ENABLE(); - else if (GPIOx==GPIOE) - __HAL_RCC_GPIOE_CLK_ENABLE(); - else - status = HAL_ERROR; - - return status; -} - -//------------------------GPIO INIT FUNCTIONS------------------------ -//------------------------------------------------------------------- \ No newline at end of file diff --git a/Code/GENERAL/gpio_general.h b/Code/GENERAL/gpio_general.h deleted file mode 100644 index 86ba923..0000000 --- a/Code/GENERAL/gpio_general.h +++ /dev/null @@ -1,17 +0,0 @@ -/**********************************TIM************************************** -Данный файл содержит объявления базовых функции и дефайны для инициализации -портов. -***************************************************************************/ -#ifndef __GPIO_GENERAL_H_ -#define __GPIO_GENERAL_H_ - -#include "periph_general.h" - -///////////////////////////////////////////////////////////////////// -///////////////////////////---FUNCTIONS---/////////////////////////// - -HAL_StatusTypeDef GPIO_Clock_Enable(GPIO_TypeDef *GPIOx); -///////////////////////////---FUNCTIONS---/////////////////////////// - - -#endif // __GPIO_GENERAL_H_ \ No newline at end of file diff --git a/Code/GENERAL/periph_general.h b/Code/GENERAL/periph_general.h deleted file mode 100644 index 990d069..0000000 --- a/Code/GENERAL/periph_general.h +++ /dev/null @@ -1,29 +0,0 @@ -/**********************************TIM************************************** -Данный файл содержит инклюды и дефайны для всех библиотек базовой перефирии. -***************************************************************************/ -#ifndef __PERIPH_GENERAL_H_ -#define __PERIPH_GENERAL_H_ - - -// user includes -#include "modbus.h" - -#include "trace.h" - - - -extern void Error_Handler(void); -#define ERROR_HANDLER_NAME(_params_) Error_Handler(_params_) -/* If error handler not defined - set void */ -#ifndef ERROR_HANDLER_NAME -#define ((void)0U) -#endif // ERROR_HANDLER_NAME - -#include "stm32f4xx_hal.h" - -#include "gpio_general.h" -#include "uart_general.h" -#include "tim_general.h" - - -#endif // __PERIPH_GENERAL_H_ \ No newline at end of file diff --git a/Code/GENERAL/tim_general.c b/Code/GENERAL/tim_general.c deleted file mode 100644 index 4e7931d..0000000 --- a/Code/GENERAL/tim_general.c +++ /dev/null @@ -1,481 +0,0 @@ -/**********************************TIM************************************** -Данный файл содержит базовые функции для инициализации таймеров. -//-------------------Функции-------------------// - -@func tim initialize - - TIM_Base_Init Инициализация TIM - - TIM_Output_PWM_Init Инициализация PWM с выводом на GPIO - - TIM_Base_MspInit Аналог HAL_MspInit для таймера -***************************************************************************/ -#include "tim_general.h" - -//------------------------------------------------------------------- -//-------------------------TIM INIT FUNCTIONS------------------------ -/** - * @brief Initialize TIM with TIM_SettingsTypeDef structure. - * @param stim - указатель на структуру с настройками таймера. - * @return HAL status. - * @note Данная структура содержит хендл таймера и структуры для его настройки. - */ -HAL_StatusTypeDef TIM_Base_Init(TIM_SettingsTypeDef *stim) -{ // function takes structure for init - // check that htim is defined - if (stim->htim.Instance == NULL) - return HAL_ERROR; - - - - if(stim->sTickBaseMHz) // if tickbase isnt disable - { - if((stim->sTimAHBFreqMHz == 0)) - return HAL_ERROR; - stim->htim.Init.Prescaler = (stim->sTimAHBFreqMHz*stim->sTickBaseMHz) - 1; - - if ((stim->sTimFreqHz != NULL)) - stim->htim.Init.Period = ((1000000/stim->sTickBaseMHz) / stim->sTimFreqHz) - 1; - } - // if freq is too high (period too small for choosen base) OR base is too high (period too small for choosen base) - if((stim->htim.Init.Period == NULL) || (stim->htim.Init.Prescaler == NULL)) - { - return HAL_ERROR; - } - - // fix overflow of presc and period if need - for(int i = 0; (stim->htim.Init.Prescaler > 0xFFFF) || (stim->htim.Init.Period > 0xFFFF); i++) - { - if (i>10) // if it isnt fixed after 10 itteration - return HAL_ERRPOR - { - return HAL_ERROR; - } - - // if timbase is too big (prescaller too big for choosen base from MHZ) - if(stim->htim.Init.Prescaler > 0xFFFF) - { - // переносим часть пресскалера в период - stim->htim.Init.Prescaler = ((stim->htim.Init.Prescaler + 1)/2) - 1; - stim->htim.Init.Period = ((stim->htim.Init.Period + 1)*2) - 1; - // обновляем TickBase - stim->sTickBaseMHz /= 2; - } - // if freq is too low (period too big for choosen base) - if(stim->htim.Init.Period > 0xFFFF) - { - // переносим часть периода в прескалер - stim->htim.Init.Period = ((stim->htim.Init.Period + 1)/2) - 1; - stim->htim.Init.Prescaler = ((stim->htim.Init.Prescaler + 1)*2) - 1; - // обновляем TickBase - stim->sTickBaseMHz *= 2; - } - } - - //-------------TIM BASE INIT---------------- - // tim base init - TIM_Base_MspInit(&stim->htim, stim->sTimMode); - if (HAL_TIM_Base_Init(&stim->htim) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - - //-------------CLOCK SRC INIT--------------- - // fill sClockSourceConfig if its NULL - if (stim->sClockSourceConfig.ClockSource == NULL) - stim->sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; - // clock source init - if (HAL_TIM_ConfigClockSource(&stim->htim, &stim->sClockSourceConfig) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - - //--------------SLAVE INIT------------------ - // if slave mode enables - config it - if (stim->sSlaveConfig.SlaveMode) - { - // slave mode init - if (HAL_TIM_SlaveConfigSynchro(&stim->htim, &stim->sSlaveConfig) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - } - //--------------MASTER INIT----------------- - // master mode init - if (HAL_TIMEx_MasterConfigSynchronization(&stim->htim, &stim->sMasterConfig) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - - //--------------BDTR INIT----------------- - if (HAL_TIMEx_ConfigBreakDeadTime(&stim->htim, &stim->sBreakDeadTimeConfig) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - - //----------------IT CLEAR------------------- - __HAL_TIM_CLEAR_IT(&stim->htim, TIM_IT_UPDATE); - - - stim->htim.Instance->CNT = 0; - return HAL_OK; -} - - - -/** - * @brief Initialize PWM Channel and GPIO for output. - * @param htim - указатель на хендл таймера. - * @param sConfigOC - указатель на настрйоки канала таймера. - * @param TIM_CHANNEL - канал таймера для настройки. - * @param GPIOx - порт для вывода ШИМ. - * @param GPIO_PIN - пин для вывода ШИМ. - * @return HAL status. - */ -HAL_StatusTypeDef TIM_Output_PWM_Init(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfigOC, uint32_t TIM_CHANNEL, GPIO_TypeDef *GPIOx, uint32_t GPIO_PIN) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - HAL_StatusTypeDef RES = HAL_ERROR; - - // setup channel for pwm - if (HAL_TIM_PWM_ConfigChannel(htim, sConfigOC, TIM_CHANNEL) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - // choose port for enable clock - if(GPIO_Clock_Enable(GPIOx) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - - GPIO_InitStruct.Pin = GPIO_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = TIM_Alternate_Mapping(htim->Instance); - if(GPIO_InitStruct.Alternate) - HAL_GPIO_Init(GPIOx, &GPIO_InitStruct); - - return HAL_OK; -} - - - -/** - * @brief Initialize TIMs clock and interrupt. - * @param htim - указатель на хендл таймера. - * @note Чтобы не генерировать функцию с иницилизацией неиспользуемых таймеров, - дефайнами в tim_general.h определяются используемые таймеры. - */ -void TIM_Base_MspInit(TIM_HandleTypeDef* htim, TIM_ITModeTypeDef it_mode) -{ - it_mode = it_mode&TIM_IT_CONF; -#ifdef USE_TIM1 - if(htim->Instance==TIM1) - { - /* TIM2 clock enable */ - __HAL_RCC_TIM1_CLK_ENABLE(); - - /* TIM2 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM1_UP_TIM10_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM1_UP_TIM10_IRQn); - } - } -#endif -#ifdef USE_TIM2 - if(htim->Instance==TIM2) - { - /* TIM2 clock enable */ - __HAL_RCC_TIM2_CLK_ENABLE(); - - /* TIM2 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM2_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM2_IRQn); - } - } -#endif -#ifdef USE_TIM3 - if(htim->Instance==TIM3) - { - /* TIM3 clock enable */ - __HAL_RCC_TIM3_CLK_ENABLE(); - - /* TIM3 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM3_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM3_IRQn); - } - } -#endif -#ifdef USE_TIM4 - if(htim->Instance==TIM4) - { - /* TIM4 clock enable */ - __HAL_RCC_TIM4_CLK_ENABLE(); - - /* TIM4 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM4_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM4_IRQn); - } - } -#endif -#ifdef USE_TIM5 - if(htim->Instance==TIM5) - { - /* TIM5 clock enable */ - __HAL_RCC_TIM5_CLK_ENABLE(); - - /* TIM5 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM5_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM5_IRQn); - } - } -#endif -#ifdef USE_TIM6 - if(htim->Instance==TIM6) - { - /* TIM6 clock enable */ - __HAL_RCC_TIM6_CLK_ENABLE(); - - /* TIM6 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM6_DAC_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn); - } - } -#endif -#ifdef USE_TIM7 - if(htim->Instance==TIM7) - { - /* TIM7 clock enable */ - __HAL_RCC_TIM7_CLK_ENABLE(); - - /* TIM7 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM7_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM7_IRQn); - } - } -#endif -#ifdef USE_TIM8 - if(htim->Instance==TIM8) - { - /* TIM8 clock enable */ - __HAL_RCC_TIM8_CLK_ENABLE(); - - /* TIM8 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM8_UP_TIM13_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM8_UP_TIM13_IRQn); - } - } -#endif -#ifdef USE_TIM9 - if(htim->Instance==TIM9) - { - /* TIM9 clock enable */ - __HAL_RCC_TIM9_CLK_ENABLE(); - - /* TIM9 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM1_BRK_TIM9_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM1_BRK_TIM9_IRQn); - } - } -#endif -#ifdef USE_TIM10 - if(htim->Instance==TIM10) - { - /* TIM10 clock enable */ - __HAL_RCC_TIM10_CLK_ENABLE(); - - /* TIM10 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM1_UP_TIM10_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM1_UP_TIM10_IRQn); - } - } -#endif -#ifdef USE_TIM11 - if(htim->Instance==TIM11) - { - /* TIM11 clock enable */ - __HAL_RCC_TIM11_CLK_ENABLE(); - - /* TIM11 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM1_TRG_COM_TIM11_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM1_TRG_COM_TIM11_IRQn); - } - } -#endif -#ifdef USE_TIM12 - if(htim->Instance==TIM12) - { - /* TIM12 clock enable */ - __HAL_RCC_TIM12_CLK_ENABLE(); - - /* TIM12 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM8_BRK_TIM12_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM8_BRK_TIM12_IRQn); - } - } -#endif -#ifdef USE_TIM13 - if(htim->Instance==TIM13) - { - /* TIM13 clock enable */ - __HAL_RCC_TIM13_CLK_ENABLE(); - - /* TIM13 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM8_UP_TIM13_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM8_UP_TIM13_IRQn); - } - } -#endif -#ifdef USE_TIM14 - if(htim->Instance==TIM14) - { - /* TIM14 clock enable */ - __HAL_RCC_TIM14_CLK_ENABLE(); - - /* TIM14 interrupt Init */ - if(it_mode) - { - HAL_NVIC_SetPriority(TIM8_TRG_COM_TIM14_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM8_TRG_COM_TIM14_IRQn); - } - } -#endif -} -/** - * @brief DeInitialize TIMs clock and interrupt. - * @param htim - указатель на хендл таймера. - * @note Чтобы не генерировать функцию с деиницилизацией неиспользуемых таймеров, - дефайнами в tim_general.h определяются используемые таймеры. - */ -void TIM_Base_MspDeInit(TIM_HandleTypeDef* htim) -{ -#ifdef USE_TIM1 - if(htim->Instance==TIM1) - { - __HAL_RCC_TIM1_FORCE_RESET(); - __HAL_RCC_TIM1_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM2 - if(htim->Instance==TIM2) - { - __HAL_RCC_TIM2_FORCE_RESET(); - __HAL_RCC_TIM2_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM3 - if(htim->Instance==TIM3) - { - __HAL_RCC_TIM3_FORCE_RESET(); - __HAL_RCC_TIM3_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM4 - if(htim->Instance==TIM4) - { - __HAL_RCC_TIM4_FORCE_RESET(); - __HAL_RCC_TIM4_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM5 - if(htim->Instance==TIM5) - { - __HAL_RCC_TIM5_FORCE_RESET(); - __HAL_RCC_TIM5_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM6 - if(htim->Instance==TIM6) - { - __HAL_RCC_TIM6_FORCE_RESET(); - __HAL_RCC_TIM6_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM7 - if(htim->Instance==TIM7) - { - __HAL_RCC_TIM7_FORCE_RESET(); - __HAL_RCC_TIM7_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM8 - if(htim->Instance==TIM8) - { - __HAL_RCC_TIM8_FORCE_RESET(); - __HAL_RCC_TIM8_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM9 - if(htim->Instance==TIM9) - { - __HAL_RCC_TIM9_FORCE_RESET(); - __HAL_RCC_TIM9_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM10 - if(htim->Instance==TIM10) - { - __HAL_RCC_TIM10_FORCE_RESET(); - __HAL_RCC_TIM10_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM11 - if(htim->Instance==TIM11) - { - __HAL_RCC_TIM11_FORCE_RESET(); - __HAL_RCC_TIM11_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM12 - if(htim->Instance==TIM12) - { - __HAL_RCC_TIM12_FORCE_RESET(); - __HAL_RCC_TIM12_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM13 - if(htim->Instance==TIM13) - { - __HAL_RCC_TIM13_FORCE_RESET(); - __HAL_RCC_TIM13_RELEASE_RESET(); - } -#endif -#ifdef USE_TIM14 - if(htim->Instance==TIM14) - { - __HAL_RCC_TIM14_FORCE_RESET(); - __HAL_RCC_TIM14_RELEASE_RESET(); - } -#endif -} -//-------------------------TIM INIT FUNCTIONS------------------------ -//------------------------------------------------------------------- \ No newline at end of file diff --git a/Code/GENERAL/tim_general.h b/Code/GENERAL/tim_general.h deleted file mode 100644 index f3b72f2..0000000 --- a/Code/GENERAL/tim_general.h +++ /dev/null @@ -1,127 +0,0 @@ -/**********************************TIM************************************** -Данный файл содержит объявления базовых функции и дефайны для инициализации -таймеров. -***************************************************************************/ -#ifndef __TIM_GENERAL_H_ -#define __TIM_GENERAL_H_ - -///////////////////////////////////////////////////////////////////// -/////////////////////////---USER SETTINGS---///////////////////////// -#define HAL_TIM_MODULE_ENABLED // need to uncomment this define in stm32f4xx_hal_conf.h - -#define USE_TIM1 -#define USE_TIM2 -#define USE_TIM3 -#define USE_TIM4 -#define USE_TIM5 -#define USE_TIM6 -#define USE_TIM7 -#define USE_TIM8 -#define USE_TIM9 -#define USE_TIM10 -#define USE_TIM11 -#define USE_TIM12 -#define USE_TIM13 -#define USE_TIM14 -/* note: used uart defines in modbus.h */ - -/////////////////////////---USER SETTINGS---///////////////////////// -#include "periph_general.h" - -///////////////////////////////////////////////////////////////////// -////////////////////////////---DEFINES---//////////////////////////// -#define TIM_IT_CONF_Pos 0 -//#define TIM_PWM_CONF_Pos 1 -//#define TIM_CLCK_SRC_CONF_Pos 2 -//#define TIM_SLAVE_CONF_Pos 3 -//#define TIM_MASTER_CONF_Pos 4 -//#define TIM_BDTR_CONF_Pos 5 - -#define TIM_IT_CONF (1<<(TIM_IT_CONF_Pos)) -//#define TIM_PWM_CONF (1<<(TIM_PWM_Pos)) - - -#define TIM_Alternate_Mapping(INSTANCE) ((((INSTANCE) == TIM1) || ((INSTANCE) == TIM2))? GPIO_AF1_TIM1: \ - (((INSTANCE) == TIM3) || ((INSTANCE) == TIM4) || ((INSTANCE) == TIM5))? GPIO_AF2_TIM3: \ - (((INSTANCE) == TIM8) || ((INSTANCE) == TIM9) || ((INSTANCE) == TIM10) || ((INSTANCE) == TIM11))? GPIO_AF3_TIM8: \ - (((INSTANCE) == TIM12) || ((INSTANCE) == TIM13) || ((INSTANCE) == TIM14))? GPIO_AF9_TIM12: \ - (0)) -////////////////////////////---DEFINES---////////////////////////////] - - - -///////////////////////////////////////////////////////////////////// -///////////////////////---STRUCTURES & ENUMS---////////////////////// -typedef enum -{ - TIM_DEFAULT = 0, - TIM_IT_MODE = TIM_IT_CONF, -// TIM_PWM_MODE = TIM_PWM_ENABLE, -// TIM_PWM_IT_MODE = TIM_PWM_ENABLE | TIM_IT_CONF, -}TIM_ITModeTypeDef; - - -typedef enum -{ - TIM_Base_Disable = 0, - TIM_TickBase_1US = 1, - TIM_TickBase_10US = 10, - TIM_TickBase_100US = 100, - TIM_TickBase_1MS = 1000, - TIM_TickBase_10MS = 10000, - TIM_TickBase_100MS = 100000, -}TIM_MHzTickBaseTypeDef; - -typedef struct // struct with settings for custom function -{ - TIM_HandleTypeDef htim; - TIM_ClockConfigTypeDef sClockSourceConfig; - TIM_SlaveConfigTypeDef sSlaveConfig; - TIM_MasterConfigTypeDef sMasterConfig; - TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig; - TIM_ITModeTypeDef sTimMode; - - TIM_MHzTickBaseTypeDef sTickBaseMHz; - float sTimAHBFreqMHz; - uint32_t sTimFreqHz; - -}TIM_SettingsTypeDef; -///////////////////////---STRUCTURES & ENUMS---////////////////////// - -///////////////////////////////////////////////////////////////////// -///////////////////////////---FUNCTIONS---/////////////////////////// -/** - * @brief Initialize TIM with TIM_SettingsTypeDef structure. - * @param stim - указатель на структуру с настройками таймера. - * @return HAL status. - * @note Данная структура содержит хендл таймера и структуры для его настройки. - */ -HAL_StatusTypeDef TIM_Base_Init(TIM_SettingsTypeDef* stim); -/** - * @brief Initialize PWM Channel and GPIO for output. - * @param htim - указатель на хендл таймера. - * @param sConfigOC - указатель на настрйоки канала таймера. - * @param TIM_CHANNEL - канал таймера для настройки. - * @param GPIOx - порт для вывода ШИМ. - * @param GPIO_PIN - пин для вывода ШИМ. - * @return HAL status. - */ -HAL_StatusTypeDef TIM_Output_PWM_Init(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfigOC, uint32_t TIM_CHANNEL, GPIO_TypeDef *GPIOx, uint32_t PWM_PIN); -/** - * @brief Initialize TIMs clock and interrupt. - * @param htim - указатель на хендл таймера. - * @note Чтобы не генерировать функцию с иницилизацией неиспользуемых таймеров, - дефайнами в tim_general.h определяются используемые таймеры. - */ -void TIM_Base_MspInit(TIM_HandleTypeDef* htim, TIM_ITModeTypeDef it_mode); -/** - * @brief DeInitialize TIMs clock and interrupt. - * @param htim - указатель на хендл таймера. - * @note Чтобы не генерировать функцию с деиницилизацией неиспользуемых таймеров, - дефайнами в tim_general.h определяются используемые таймеры. - */ -void TIM_Base_MspDeInit(TIM_HandleTypeDef* htim); -///////////////////////////---FUNCTIONS---/////////////////////////// - - -#endif // __TIM_GENERAL_H_ \ No newline at end of file diff --git a/Code/GENERAL/uart_general.c b/Code/GENERAL/uart_general.c deleted file mode 100644 index b92b8ed..0000000 --- a/Code/GENERAL/uart_general.c +++ /dev/null @@ -1,373 +0,0 @@ -/*********************************UART************************************** -Данный файл содержит базовые функции для инициализации UART. -//-------------------Функции-------------------// -@func users - - UART_Base_Init Инициализация UART - -@func uart initialize - - UART_GPIO_Init Инициализация GPIO для UART - - UART_DMA_Init Инициализация DMA для UART - - UART_MspInit Аналог HAL_MspInit для UART - - UART_MspDeInit Аналог HAL_MspDeInit для UART -***************************************************************************/ -#include "uart_general.h" - -//------------------------------------------------------------------- -//------------------------UART INIT FUNCTIONS------------------------ -/** - * @brief Initialize UART with UART_SettingsTypeDef structure. - * @param suart - указатель на структуру с настройками UART. - * @return HAL status. - * @note Данная структура содержит хендл ЮАРТ и настройки перефирии (GPIO) - */ -HAL_StatusTypeDef UART_Base_Init(UART_SettingsTypeDef *suart) -{ // function takes setting structure for init - - // check is settings are valid - if(Check_UART_Init_Struct(suart) != HAL_OK) - return HAL_ERROR; - - suart->huart.Init.Mode = UART_MODE_TX_RX; - - UART_MspInit(&suart->huart); - - - if (HAL_UART_Init(&suart->huart) != HAL_OK) - { - ERROR_HANDLER_NAME(); - return HAL_ERROR; - } - - // init gpio from UARTSettings structure - UART_GPIO_Init(suart->GPIOx, suart->GPIO_PIN_RX, suart->GPIO_PIN_TX); - - // init dma from UARTSettings structure if need - if (suart->DMAChannel != 0) - UART_DMA_Init(&suart->huart, suart->huart.hdmarx, suart->DMAChannel, suart->DMA_CHANNEL_X); - - - return HAL_OK; -} - - -/** - * @brief Initialize GPIO for UART. - * @param GPIOx - порт для настройки. - * @param GPIO_PIN_RX - пин для настройки на прием. - * @param GPIO_PIN_TX - пин для настройки на передачу. - */ -void UART_GPIO_Init(GPIO_TypeDef *GPIOx, uint16_t GPIO_PIN_RX, uint16_t GPIO_PIN_TX) -{ // function takes port and pins (for rx and tx) - GPIO_InitTypeDef GPIO_InitStruct = {0}; - - // choose port for enable clock - GPIO_Clock_Enable(GPIOx); - - //USART3 GPIO Configuration - //GPIO_PIN_TX ------> USART_TX - //GPIO_PIN_RX ------> USART_RX - -#if defined(STM32F407xx) // gpio init for 407 - GPIO_InitStruct.Pin = GPIO_PIN_TX|GPIO_PIN_RX; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF7_USART3; - HAL_GPIO_Init(GPIOx, &GPIO_InitStruct); -#elif defined(STM32F103xG) // gpio init for atm403/stm103 - //GPIO_PIN_TX ------> USART_TX - GPIO_InitStruct.Pin = GPIO_PIN_TX; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOx, &GPIO_InitStruct); - -// GPIO_PIN_RX ------> USART_RX - GPIO_InitStruct.Pin = GPIO_PIN_RX; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOx, &GPIO_InitStruct); -#endif -} - -/** - * @brief Initialize DMA for UART. - * @param huart - указатель на хендл UART для настройки DMA. - * @param hdma_rx - указатель на хендл DMA для линии приема UART. - * @param DMAChannel - указатель на канал DMA/поток DMA в STM32F407. - * @param DMA_CHANNEL_X - канал DMA. - */ -void UART_DMA_Init(UART_HandleTypeDef *huart, DMA_HandleTypeDef *hdma_rx, DMA_Stream_TypeDef *DMAChannel, uint32_t DMA_CHANNEL_X) -{ // function takes uart and dma handlers and dmachannel for uart - // for now only dma rx is supported, tx maybe later if needed - // calc defines on boot_project_setup.h - - /* USART3 DMA Init */ - /* USART3_RX Init */ - - hdma_rx->Instance = DMAChannel; -#if defined(STM32F407xx) // dma channel choose for 407 - hdma_rx->Init.Channel = DMA_CHANNEL_X; -#endif - hdma_rx->Init.Direction = DMA_PERIPH_TO_MEMORY; - hdma_rx->Init.PeriphInc = DMA_PINC_DISABLE; - hdma_rx->Init.MemInc = DMA_MINC_ENABLE; - hdma_rx->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; - hdma_rx->Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; - hdma_rx->Init.Mode = DMA_CIRCULAR; - hdma_rx->Init.Priority = DMA_PRIORITY_LOW; - if (HAL_DMA_Init(hdma_rx) != HAL_OK) - { - ERROR_HANDLER_NAME(); - } - - __USER_LINKDMA(huart,hdmarx,hdma_rx); - - - // __USER_LINKDMA is need because __HAL_LINKDMA is written for global defined hdma_rx - // so you get error because hal uses . insted of -> -} - -/** - * @brief Initialize UART & DMA clock and interrupt. - * @param huart - указатель на хендл UART для инициализации. - * @note Чтобы не генерировать функцию с иницилизацией неиспользуемых UART, - дефайнами в rs_message.h определяются используемые UART. - */ -void UART_MspInit(UART_HandleTypeDef *huart) // analog for hal function -{ -// __RCC_DMA_UART_CLK_ENABLE(); -// /* DMA interrupt init */ -// /* DMA1_Stream1_IRQn interrupt configuration */ -// HAL_NVIC_SetPriority(DMA_UART_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA_UART_IRQn); - - // rcc, dma and interrupt init for USARTs - // GPIO init was moved to own functions UART_GPIO_Init - if(0); -#ifdef USE_USART1 - else if(huart->Instance==USART1) - { - - /* DMA2 clock enable */ - __HAL_RCC_DMA2_CLK_ENABLE(); - /* DMA interrupt init */ - HAL_NVIC_SetPriority(DMA2_Stream2_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA2_Stream2_IRQn); - - /* USART1 clock enable */ - __HAL_RCC_USART1_CLK_ENABLE(); - - /* USART1 interrupt Init */ - HAL_NVIC_SetPriority(USART1_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USART1_IRQn); - } -#endif // USE_USART1 -#ifdef USE_USART2 - else if(huart->Instance==USART2) - { - /* DMA1 clock enable */ - __HAL_RCC_DMA1_CLK_ENABLE(); - /* DMA interrupt init */ - HAL_NVIC_SetPriority(DMA1_Stream5_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA1_Stream5_IRQn); - - /* USART2 clock enable */ - __HAL_RCC_USART2_CLK_ENABLE(); - - /* USART2 interrupt Init */ - HAL_NVIC_SetPriority(USART2_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USART2_IRQn); - } -#endif // USE_USART2 -#ifdef USE_USART3 - else if(huart->Instance==USART3) - { - /* DMA1 clock enable */ - __HAL_RCC_DMA1_CLK_ENABLE(); - /* DMA interrupt init */ - HAL_NVIC_SetPriority(DMA1_Stream1_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA1_Stream1_IRQn); - - /* USART3 clock enable */ - __HAL_RCC_USART3_CLK_ENABLE(); - /* USART3 interrupt Init */ - HAL_NVIC_SetPriority(USART3_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USART3_IRQn); - } -#endif // USE_USART3 -#ifdef USE_UART4 - else if(huart->Instance==UART4) - { - /* DMA1 clock enable */ - __HAL_RCC_DMA1_CLK_ENABLE(); - /* DMA interrupt init */ - HAL_NVIC_SetPriority(DMA1_Stream2_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA1_Stream2_IRQn); - - /* UART4 clock enable */ - __HAL_RCC_UART4_CLK_ENABLE(); - - /* UART4 interrupt Init */ - HAL_NVIC_SetPriority(UART4_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(UART4_IRQn); - } -#endif // USE_UART4 -#ifdef USE_UART5 - else if(huart->Instance==UART5) - { - /* DMA1 clock enable */ - __HAL_RCC_DMA1_CLK_ENABLE(); - /* DMA interrupt init */ - HAL_NVIC_SetPriority(DMA1_Stream0_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA1_Stream0_IRQn); - - /* UART5 clock enable */ - __HAL_RCC_DMA1_CLK_ENABLE(); - - /* UART5 interrupt Init */ - HAL_NVIC_SetPriority(UART5_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(UART5_IRQn); - } -#endif // USE_UART5 -#ifdef USE_USART6 - else if(huart->Instance==USART6) - { - /* DMA2 clock enable */ - __HAL_RCC_DMA2_CLK_ENABLE(); - /* DMA interrupt init */ - HAL_NVIC_SetPriority(DMA2_Stream1_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA2_Stream1_IRQn); - - /* USART6 clock enable */ - __HAL_RCC_USART6_CLK_ENABLE(); - - /* USART6 interrupt Init */ - HAL_NVIC_SetPriority(USART6_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USART6_IRQn); - } -#endif // USE_USART6 -} - -/** - * @brief Deinitialize UART & DMA clock and interrupt. - * @param huart - указатель на хендл UART для деинициализации. - * @note Чтобы не генерировать функцию с деиницилизацией неиспользуемых UART, - дефайнами определяются используемые UART. - */ -void UART_MspDeInit(UART_HandleTypeDef *huart) // analog for hal function -{ - // rcc, dma and interrupt init for USARTs - // GPIO init was moved to own functions UART_GPIO_Init - if(0); -#ifdef USE_USART1 - else if(huart->Instance==USART1) - { - -// /* DMA2 clock enable */ -// __HAL_RCC_DMA2_CLK_ENABLE(); -// /* DMA interrupt init */ -// HAL_NVIC_SetPriority(DMA2_Stream2_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA2_Stream2_IRQn); - - /* USART1 clock reset */ - __HAL_RCC_USART1_FORCE_RESET(); - __HAL_RCC_USART1_RELEASE_RESET(); - } -#endif // USE_USART1 -#ifdef USE_USART2 - else if(huart->Instance==USART2) - { -// /* DMA1 clock enable */ -// __HAL_RCC_DMA1_CLK_ENABLE(); -// /* DMA interrupt init */ -// HAL_NVIC_SetPriority(DMA1_Stream5_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA1_Stream5_IRQn); - - /* USART2 clock reset */ - __HAL_RCC_USART2_FORCE_RESET(); - __HAL_RCC_USART2_RELEASE_RESET(); - } -#endif // USE_USART2 -#ifdef USE_USART3 - else if(huart->Instance==USART3) - { -// /* DMA1 clock enable */ -// __HAL_RCC_DMA1_CLK_ENABLE(); -// /* DMA interrupt init */ -// HAL_NVIC_SetPriority(DMA1_Stream1_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA1_Stream1_IRQn); - - /* USART3 clock reset */ - __HAL_RCC_USART3_FORCE_RESET(); - __HAL_RCC_USART3_RELEASE_RESET(); - } -#endif // USE_USART3 -#ifdef USE_UART4 - else if(huart->Instance==UART4) - { -// /* DMA1 clock enable */ -// __HAL_RCC_DMA1_CLK_ENABLE(); -// /* DMA interrupt init */ -// HAL_NVIC_SetPriority(DMA1_Stream2_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA1_Stream2_IRQn); - - /* UART4 clock reset */ - __HAL_RCC_UART4_FORCE_RESET(); - __HAL_RCC_UART4_RELEASE_RESET(); - } -#endif // USE_UART4 -#ifdef USE_UART5 - else if(huart->Instance==UART5) - { -// /* DMA1 clock enable */ -// __HAL_RCC_DMA1_CLK_ENABLE(); -// /* DMA interrupt init */ -// HAL_NVIC_SetPriority(DMA1_Stream0_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA1_Stream0_IRQn); - - /* UART5 clock reset */ - __HAL_RCC_UART5_FORCE_RESET(); - __HAL_RCC_UART5_RELEASE_RESET(); - } -#endif // USE_UART5 -#ifdef USE_USART6 - else if(huart->Instance==USART6) - { -// /* DMA2 clock enable */ -// __HAL_RCC_DMA2_CLK_ENABLE(); -// /* DMA interrupt init */ -// HAL_NVIC_SetPriority(DMA2_Stream1_IRQn, 0, 0); -// HAL_NVIC_EnableIRQ(DMA2_Stream1_IRQn); - - /* USART6 clock reset */ - __HAL_RCC_USART6_FORCE_RESET(); - __HAL_RCC_USART6_RELEASE_RESET(); - } -#endif // USE_USART6 -} - -/** - * @brief Check that uart init structure have correct values. - * @param suart - указатель на структуру с настройками UART. - * @return HAL status. - */ -HAL_StatusTypeDef Check_UART_Init_Struct(UART_SettingsTypeDef *suart) -{ - // check is settings are valid - if (!IS_UART_INSTANCE(suart->huart.Instance)) - return HAL_ERROR; - - if (!IS_UART_BAUDRATE(suart->huart.Init.BaudRate) || (suart->huart.Init.BaudRate == NULL)) - return HAL_ERROR; - - if (!IS_GPIO_ALL_INSTANCE(suart->GPIOx)) - return HAL_ERROR; - - if (!IS_GPIO_PIN(suart->GPIO_PIN_RX) && !IS_GPIO_PIN(suart->GPIO_PIN_TX)) // if both pins arent set up - return HAL_ERROR; - - return HAL_OK; -} - -//------------------------UART INIT FUNCTIONS------------------------ -//------------------------------------------------------------------- \ No newline at end of file diff --git a/Code/GENERAL/uart_general.h b/Code/GENERAL/uart_general.h deleted file mode 100644 index 2657417..0000000 --- a/Code/GENERAL/uart_general.h +++ /dev/null @@ -1,106 +0,0 @@ -/*********************************UART************************************** -Данный файл содержит объявления базовых функции и дефайны для инициализации -UART. -***************************************************************************/ -#ifndef __UART_GENERAL_H_ -#define __UART_GENERAL_H_ - -////////////////////////////////////////////////////////////////////// -/////////////////////////---USER SETTINGS---///////////////////////// -#define HAL_UART_MODULE_ENABLED // need to uncomment these defines in stm32f4xx_hal_conf.h -#define HAL_USART_MODULE_ENABLED // also need to add hal_uart.c (source code) - -//#define USE_USART1 -//#define USE_USART2 -//#define USE_USART3 -//#define USE_UART4 -//#define USE_UART5 -//#define USE_USART6 -/* note: used uart defines in modbus.h */ - -/////////////////////////---USER SETTINGS---///////////////////////// -#include "periph_general.h" - - - -///////////////////////////////////////////////////////////////////// -////////////////////////////---DEFINES---//////////////////////////// -/** - * @brief Analog for HAL define. Remade with pointer to structure. - * @note @ref __HAL_LINKDMA. - */ -#define __USER_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ -do{ \ -(__HANDLE__)->__PPP_DMA_FIELD__ = (__DMA_HANDLE__); \ -(__DMA_HANDLE__)->Parent = (__HANDLE__);} while(0U) - - -////////////////////////////---DEFINES---//////////////////////////// - - -///////////////////////////////////////////////////////////////////// -///////////////////////---STRUCTURES & ENUMS---////////////////////// -typedef struct // struct with settings for custom function -{ - UART_HandleTypeDef huart; - - GPIO_TypeDef *GPIOx; - uint16_t GPIO_PIN_RX; - uint16_t GPIO_PIN_TX; - - DMA_Stream_TypeDef *DMAChannel; // DMAChannel = 0 if doesnt need - uint32_t DMA_CHANNEL_X; // DMAChannel = 0 if doesnt need - - -}UART_SettingsTypeDef; -///////////////////////---STRUCTURES & ENUMS---////////////////////// - - -///////////////////////////////////////////////////////////////////// -///////////////////////////---FUNCTIONS---/////////////////////////// -/** - * @brief Initialize UART with UART_SettingsTypeDef structure. - * @param suart - указатель на структуру с настройками UART. - * @return HAL status. - * @note Данная структура содержит хендл ЮАРТ и настройки перефирии (GPIO) - */ -HAL_StatusTypeDef UART_Base_Init(UART_SettingsTypeDef *suart); -/** - * @brief Initialize GPIO for UART. - * @param GPIOx - порт для настройки. - * @param GPIO_PIN_RX - пин для настройки на прием. - * @param GPIO_PIN_TX - пин для настройки на передачу. - */ -void UART_GPIO_Init(GPIO_TypeDef *GPIOx, uint16_t GPIO_PIN_RX, uint16_t GPIO_PIN_TX); -/** - * @brief Initialize DMA for UART. - * @param huart - указатель на хендл UART для настройки DMA. - * @param hdma_rx - указатель на хендл DMA для линии приема UART. - * @param DMAChannel - указатель на канал DMA/поток DMA в STM32F407. - * @param DMA_CHANNEL_X - канал DMA. - */ -void UART_DMA_Init(UART_HandleTypeDef *huart, DMA_HandleTypeDef *hdma_rx, DMA_Stream_TypeDef *DMAChannel, uint32_t DMA_CHANNEL_X); -/** - * @brief Initialize UART & DMA clock and interrupt. - * @param huart - указатель на хендл UART для инициализации. - * @note Чтобы не генерировать функцию с иницилизацией неиспользуемых UART, - дефайнами определяются используемые UART. - */ -void UART_MspInit(UART_HandleTypeDef *huart); -/** - * @brief Deinitialize UART & DMA clock and interrupt. - * @param huart - указатель на хендл UART для деинициализации. - * @note Чтобы не генерировать функцию с деиницилизацией неиспользуемых UART, - дефайнами в rs_message.h определяются используемые UART. - */ -void UART_MspDeInit(UART_HandleTypeDef *huart); - -/** - * @brief Check that uart init structure have correct values. - * @param suart - указатель на структуру с настройками UART. - * @return HAL status. - */ -HAL_StatusTypeDef Check_UART_Init_Struct(UART_SettingsTypeDef *suart); -///////////////////////////---FUNCTIONS---/////////////////////////// - -#endif // __UART_GENERAL_H_ \ No newline at end of file diff --git a/Code/Modbus/crc_algs.c b/Code/Modbus/crc_algs.c deleted file mode 100644 index cd07614..0000000 --- a/Code/Modbus/crc_algs.c +++ /dev/null @@ -1,116 +0,0 @@ -#include "crc_algs.h" - - -uint32_t CRC_calc; -uint32_t CRC_ref; - -//uint16_t CRC_calc; -//uint16_t CRC_ref; - - -// left this global for debug -uint8_t uchCRCHi = 0xFF; -uint8_t uchCRCLo = 0xFF; -unsigned uIndex; - - -uint32_t crc32(uint8_t *data, uint32_t data_size) -{ - static const unsigned int crc32_table[] = -{ - 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, - 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, - 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, - 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, - 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, - 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, - 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, - 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, - 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, - 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, - 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, - 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, - 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, - 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, - 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, - 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, - 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, - 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, - 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, - 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, - 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, - 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, - 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, - 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, - 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, - 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, - 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, - 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, - 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, - 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, - 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, - 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -}; -unsigned int crc = 0xFFFFFFFF; - while (data_size--) - { - crc = (crc >> 8) ^ crc32_table[(crc ^ *data) & 255]; - data++; - } - return crc^0xFFFFFFFF; -} - - -uint16_t crc16(uint8_t *data, uint32_t data_size) -{ - /*Table of CRC values for high order byte*/ - static unsigned char auchCRCHi[]= - { - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41, - 0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40, - }; - /*Table of CRC values for low order byte*/ - static char auchCRCLo[] = - { - 0x00,0xC0,0xC1,0x01,0xC3,0x03,0x02,0xC2,0xC6,0x06,0x07,0xC7,0x05,0xC5,0xC4,0x04, - 0xCC,0x0C,0x0D,0xCD,0x0F,0xCF,0xCE,0x0E,0x0A,0xCA,0xCB,0x0B,0xC9,0x09,0x08,0xC8, - 0xD8,0x18,0x19,0xD9,0x1B,0xDB,0xDA,0x1A,0x1E,0xDE,0xDF,0x1F,0xDD,0x1D,0x1C,0xDC, - 0x14,0xD4,0xD5,0x15,0xD7,0x17,0x16,0xD6,0xD2,0x12,0x13,0xD3,0x11,0xD1,0xD0,0x10, - 0xF0,0x30,0x31,0xF1,0x33,0xF3,0xF2,0x32,0x36,0xF6,0xF7,0x37,0xF5,0x35,0x34,0xF4, - 0x3C,0xFC,0xFD,0x3D,0xFF,0x3F,0x3E,0xFE,0xFA,0x3A,0x3B,0xFB,0x39,0xF9,0xF8,0x38, - 0x28,0xE8,0xE9,0x29,0xEB,0x2B,0x2A,0xEA,0xEE,0x2E,0x2F,0xEF,0x2D,0xED,0xEC,0x2C, - 0xE4,0x24,0x25,0xE5,0x27,0xE7,0xE6,0x26,0x22,0xE2,0xE3,0x23,0xE1,0x21,0x20,0xE0, - 0xA0,0x60,0x61,0xA1,0x63,0xA3,0xA2,0x62,0x66,0xA6,0xA7,0x67,0xA5,0x65,0x64,0xA4, - 0x6C,0xAC,0xAD,0x6D,0xAF,0x6F,0x6E,0xAE,0xAA,0x6A,0x6B,0xAB,0x69,0xA9,0xA8,0x68, - 0x78,0xB8,0xB9,0x79,0xBB,0x7B,0x7A,0xBA,0xBE,0x7E,0x7F,0xBF,0x7D,0xBD,0xBC,0x7C, - 0xB4,0x74,0x75,0xB5,0x77,0xB7,0xB6,0x76,0x72,0xB2,0xB3,0x73,0xB1,0x71,0x70,0xB0, - 0x50,0x90,0x91,0x51,0x93,0x53,0x52,0x92,0x96,0x56,0x57,0x97,0x55,0x95,0x94,0x54, - 0x9C,0x5C,0x5D,0x9D,0x5F,0x9F,0x9E,0x5E,0x5A,0x9A,0x9B,0x5B,0x99,0x59,0x58,0x98, - 0x88,0x48,0x49,0x89,0x4B,0x8B,0x8A,0x4A,0x4E,0x8E,0x8F,0x4F,0x8D,0x4D,0x4C,0x8C, - 0x44,0x84,0x85,0x45,0x87,0x47,0x46,0x86,0x82,0x42,0x43,0x83,0x41,0x81,0x80,0x40, - }; - uchCRCHi = 0xFF; - uchCRCLo = 0xFF; - /* CRC Generation Function */ - while( data_size--) /* pass through message buffer */ - { - uIndex = uchCRCHi ^ *data++; /* calculate the CRC */ - uchCRCHi = uchCRCLo ^ auchCRCHi[uIndex]; - uchCRCLo = auchCRCLo[uIndex]; - } - return uchCRCHi | uchCRCLo<<8; -} \ No newline at end of file diff --git a/Code/Modbus/crc_algs.h b/Code/Modbus/crc_algs.h deleted file mode 100644 index 8e1fd19..0000000 --- a/Code/Modbus/crc_algs.h +++ /dev/null @@ -1,9 +0,0 @@ -#include "main.h" - -// extern here to use in bootloader.c -extern uint32_t CRC_calc; -extern uint32_t CRC_ref; - - -uint16_t crc16(uint8_t *data, uint32_t data_size); -uint32_t crc32(uint8_t *data, uint32_t data_size); \ No newline at end of file diff --git a/Code/Modbus/modbus.c b/Code/Modbus/modbus.c deleted file mode 100644 index 951b0b1..0000000 --- a/Code/Modbus/modbus.c +++ /dev/null @@ -1,864 +0,0 @@ -/********************************MODBUS************************************* -Данный файл содержит базовые функции для реализации MODBUS. -//-------------------Функции-------------------// -@func user - - MB_SetCoil - - MB_ResetCoil - -@func process message - - MB_DefineRegistersAddress Определение "начального" адреса регистров - - MB_DefineCoilsAddress Определение "начального" адреса коилов - - MB_Check_Address_For_Arr принадлежит ли адресс Addr конкретному массиву - - Modbus_Command_x Обработка команды x - -@func RS functions - - Parse_Message/Collect_Message Заполнение структуры сообщения и буфера - - RS_Response Ответ на комманду - - RS_Define_Size_of_RX_Message Определение размера принимаемых данных - - RS_Init Инициализация периферии и modbus handler - -@func initialization - - MB_Init Инициализация modbus - -//--------------Данные для модбас--------------// -@registers Holding/Input Registers - Регистры представляют собой 16-битные числа (слова). В обработке комманд - находится адресс "начального" регистра и записывается в указатель. Доступ к - остальным регистрам осуществляется через указатель. Таким образом, сами - регистры могут представлять собой как массив так и структуру. - - sine_log - массив регистров на 500 элементов - - sine_log - массив регистров на 500 элементов - -@coils Coils - Коилы представляют собой биты, упакованные в 16-битные регистры. В обработке - комманд находится адресс "начального" регистра запрашиваемого коила. Доступ к - остальным коилам осуществляется через маску и указатель. Таким образом, сами - коилы могут представлять собой как массив так и структуру. - - -@example SLAVE RECEIVE -//--------------Настройка модбас--------------// - // create handles and settings - Create_MODBUS_Handles(modbus1); - - // set up UART for modbus - modbus1_suart.huart = &modbus1_huart; - modbus1_suart.huart->Instance = USED_MODBUS_UART; - modbus1_suart.huart->Init.BaudRate = 38400; - modbus1_suart.GPIOx = MODBUS_GPIOX; - modbus1_suart.GPIO_PIN_RX = MODBUS_GPIO_PIN_RX; - modbus1_suart.GPIO_PIN_TX = MODBUS_GPIO_PIN_TX; - - // set up timeout TIM for modbus - modbus1_stim.htim = &modbus1_htim; - modbus1_stim.htim.Instance = USED_MODBUS_TIM; - modbus1_stim.htim.Init.Prescaler = 36000; // set this to 0.5 ms - modbus1_stim.TIM_MODE = TIM_IT_CONF; - - // set up modbus: MB_RX_Size_NotConst and Timeout enable - hmodbus1.ID = 1; - hmodbus1.sRS_RX_Size_Mode = RS_RX_Size_NotConst; - hmodbus1.sRS_Timeout = 100; - hmodbus1.sRS_Mode = SLAVE_ALWAYS_WAIT; - hmodbus1.RS_STATUS = RS_Init(&hmodbus1, &modbus1_suart, &modbus1_stim, 0); - -//----------------Прием модбас----------------// - RS_MsgTypeDef MODBUS_MSG; - RS_Receive_IT(&hmodbus1, &MODBUS_MSG); -***************************************************************************/ -#include "rs_message.h" -uint32_t dbg_temp, dbg_temp2, dbg_temp3; // for debug -uint32_t err_cnt = 0; -/* EXTERN MODBUS HANDLES */ -extern UART_SettingsTypeDef modbus1_suart; -extern TIM_SettingsTypeDef modbus1_stim; -extern RS_HandleTypeDef hmodbus1; - -/* DEFINE REGISTERS/COILS */ -uint16_t sine_log[R_SINE_LOG_QNT]; // start from 0x0000 -uint16_t pwm_log[R_PWM_LOG_QNT]; // start from 500 (0x1F4) -uint16_t cnt_log[R_CNT_LOG_QNT]; // start from 100 (0x3E8) -uint16_t time_log[R_TIME_LOG_QNT]; // start from 1500 (0x5DC) -uint16_t pwm_ctrl[R_PWM_CTRL_QNT]; // start from 2000 (0x7D0) -uint16_t log_ctrl[R_PWM_CTRL_QNT]; // start from 2008 (0x7D0) -uint16_t uart_ctrl[R_UART_CTRL_QNT]; - -uint16_t coils_regs[C_CTRL_COILS_QNT]; - -//------------------------------------------------------------------- -//-----------------------------FOR USER------------------------------ -/** - * @brief First set up of MODBUS. - * @note Первый инит модбас. Заполняет структуры и инициализирует таймер и юарт для общения по модбас. - * Скважность ШИМ меняется по закону синусоиды, каждый канал генерирует свой полупериод синуса (от -1 до 0 И от 0 до 1) - * ШИМ генерируется на одном канале. - * @note This called from main - */ -void MODBUS_FirstInit(void) -{ - //-----------SETUP MODBUS------------- - // set up UART for modbus - modbus1_suart.huart.Instance = USED_MODBUS_UART; - modbus1_suart.huart.Init.BaudRate = PROJSET.MB_SPEED; - modbus1_suart.GPIOx = (GPIO_TypeDef *)PROJSET.MB_GPIOX; - modbus1_suart.GPIO_PIN_RX = PROJSET.MB_GPIO_PIN_RX; - modbus1_suart.GPIO_PIN_TX = PROJSET.MB_GPIO_PIN_TX; - - // set up timeout TIM for modbus - modbus1_stim.htim.Instance = USED_MODBUS_TIM; - modbus1_stim.sTimAHBFreqMHz = PROJSET.MB_TIM_AHB_FREQ; - modbus1_stim.sTimMode = TIM_IT_CONF; - - // set up modbus: MB_RX_Size_NotConst and Timeout enable - hmodbus1.ID = PROJSET.MB_DEVICE_ID; - hmodbus1.sRS_Timeout = PROJSET.MB_MAX_TIMEOUT; - hmodbus1.sRS_Mode = SLAVE_ALWAYS_WAIT; - hmodbus1.sRS_RX_Size_Mode = RS_RX_Size_NotConst; - - // INIT - hmodbus1.RS_STATUS = RS_Init(&hmodbus1, &modbus1_suart, &modbus1_stim, 0); -} -/** - * @brief Set or Reset Coil at its global address. - * @param Addr - адрес коила. - * @param WriteVal - Что записать в коил: 0 или 1. - * @return ExceptionCode - Код исключения если коила по адресу не существует, и NO_ERRORS если все ок. - * - * @note Позволяет обратиться к любому коилу по его глобальному адрессу. - Вне зависимости от того как коилы размещены в памяти. - */ -MB_ExceptionTypeDef MB_Write_Coil_Global(uint16_t Addr, MB_CoilsOpTypeDef WriteVal) -{ - //---------CHECK FOR ERRORS---------- - MB_ExceptionTypeDef Exception = NO_ERRORS; - uint16_t *coils; - uint16_t start_shift = 0; // shift in coils register - - //------------WRITE COIL------------- - Exception = MB_DefineCoilsAddress(&coils, Addr, 1, &start_shift, 1); - if(Exception == NO_ERRORS) - { - switch(WriteVal) - { - case SET_COIL: - *coils |= (1< 125) - { - return ILLEGAL_DATA_VALUE; // return exception code - } - - // sensors array - if(MB_Check_Address_For_Arr(Addr, Qnt, R_SINE_LOG_ADDR, R_SINE_LOG_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&sine_log, Addr); // начало регистров хранения/входных - } - // PWM array - else if(MB_Check_Address_For_Arr(Addr, Qnt, R_PWM_LOG_ADDR, R_PWM_LOG_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&pwm_log, Addr - R_PWM_LOG_ADDR); // начало регистров хранения/входных - } - // counter array - else if(MB_Check_Address_For_Arr(Addr, Qnt, R_CNT_LOG_ADDR, R_CNT_LOG_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&cnt_log, Addr - R_CNT_LOG_ADDR); // начало регистров хранения/входных - } - // time array - else if(MB_Check_Address_For_Arr(Addr, Qnt, R_TIME_LOG_ADDR, R_TIME_LOG_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&time_log, Addr - R_TIME_LOG_ADDR); // начало регистров хранения/входных - } - // PWM array - else if(MB_Check_Address_For_Arr(Addr, Qnt, R_PWM_CTRL_ADDR, R_PWM_CTRL_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&pwm_ctrl, Addr - R_PWM_CTRL_ADDR); // начало регистров хранения/входных - } - // log array - else if(MB_Check_Address_For_Arr(Addr, Qnt, R_LOG_CTRL_ADDR, R_LOG_CTRL_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&log_ctrl, Addr - R_LOG_CTRL_ADDR); // начало регистров хранения/входных - } - // uart settings array - else if(MB_Check_Address_For_Arr(Addr, Qnt, R_UART_CTRL_ADDR, R_UART_CTRL_QNT) == NO_ERRORS) - { - *pRegs = MB_Set_Register_Ptr(&uart_ctrl, Addr - R_UART_CTRL_ADDR); // начало регистров хранения/входных - } - // if address doesnt match any array - return illegal data address response - else - { - return ILLEGAL_DATA_ADDRESS; - } - // if found requeried array return no err - return NO_ERRORS; // return no errors -} -/** - * @brief Define Address Origin for coils - * @param pCoils - указатель на указатель коилов. - * @param Addr - адресс начального коила. - * @param Qnt - количество запрашиваемых коилов. - * @param start_shift - указатель на переменную содержащую сдвиг внутри регистра для начального коила. - * @param WriteFlag - флаг коилы нужны для чтения или записи. - * @return ExceptionCode - Код исключения если есть, и NO_ERRORS если нет. - * - * @note Определение адреса начального регистра запрашиваемых коилов. - * @note WriteFlag используется для определния регистров GPIO: ODR или IDR. - */ -MB_ExceptionTypeDef MB_DefineCoilsAddress(uint16_t **pCoils, uint16_t Addr, uint16_t Qnt, uint16_t *start_shift, uint8_t WriteFlag) -{ - /* check quantity error */ - if (Qnt > 2000) - { - return ILLEGAL_DATA_VALUE; // return exception code - } - - // gpiod coils - if(MB_Check_Address_For_Arr(Addr, Qnt, C_GPIOD_ADDR, C_GPIOD_QNT) == NO_ERRORS) - { - if(WriteFlag) // if write set odr - *pCoils = MB_Set_Coil_Reg_Ptr(&GPIOD->ODR, Addr); - else // if read set idr - *pCoils = MB_Set_Coil_Reg_Ptr(&GPIOD->IDR, Addr); - } - // peripheral control coils - else if(MB_Check_Address_For_Arr(Addr, Qnt, C_CTRL_COILS_ADDR, C_CTRL_COILS_QNT) == NO_ERRORS) - { - *pCoils = MB_Set_Coil_Reg_Ptr(&coils_regs, Addr-C_CTRL_COILS_ADDR); - } - // if address doesnt match any array - return illegal data address response - else - { - return ILLEGAL_DATA_ADDRESS; - } - - *start_shift = Addr % 16; // set shift to requested coil - // if found requeried array return no err - return NO_ERRORS; // return no errors -} -/** - * @brief Check is address valid for certain array. - * @param Addr - начальный адресс. - * @param Qnt - количество запрашиваемых элементов. - * @param R_ARR_ADDR - начальный адресс массива R_ARR. - * @param R_ARR_NUMB - количество элементов в массиве R_ARR. - * @return ExceptionCode - ILLEGAL DATA ADRESS если адресс недействителен, и NO_ERRORS если все ок. - * - * @note Позволяет определить, принадлежит ли адресс Addr массиву R_ARR: - * Если адресс Addr находится в диапазоне адрессов массива R_ARR, то возвращаем NO_ERROR. - * Если адресс Addr находится за пределами адрессов массива R_ARR - ILLEGAL_DATA_ADDRESSю. - */ -MB_ExceptionTypeDef MB_Check_Address_For_Arr(uint16_t Addr, uint16_t Qnt, uint16_t R_ARR_ADDR, uint16_t R_ARR_NUMB) -{ - // if address from this array - if(Addr >= R_ARR_ADDR) - { - // if quantity too big return error - if ((Addr - R_ARR_ADDR) + Qnt > R_ARR_NUMB) - { - return ILLEGAL_DATA_ADDRESS; // return exception code - } - // if all ok - return no errors - return NO_ERRORS; - } - // if address isnt from this array return error - else - return ILLEGAL_DATA_ADDRESS; // return exception code -} - - -/** - * @brief Proccess command Read Coils (01 - 0x01). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Read Coils. - */ -uint8_t MB_Read_Coils(RS_MsgTypeDef *modbus_msg) -{ - //---------CHECK FOR ERRORS---------- - uint16_t *coils; - uint16_t start_shift = 0; // shift in coils register - - modbus_msg->Except_Code = MB_DefineCoilsAddress(&coils, modbus_msg->Addr, modbus_msg->Qnt, &start_shift, 0); - if(modbus_msg->Except_Code != NO_ERRORS) - return 0; - - //-----------READING COIL------------ - // setup output message data size - modbus_msg->ByteCnt = Divide_Up(modbus_msg->Qnt, 8); - // create mask for coils - uint16_t mask_for_coils = 0; // mask for coils that've been chosen - uint16_t setted_coils = 0; // value of setted coils - uint16_t temp_reg = 0; // temp register for saving coils that hasnt been chosen - uint16_t coil_cnt = 0; // counter for processed coils - - // cycle until all registers with requered coils would be processed - int shift = start_shift; // set shift to first coil in first register - int ind = 0; // index for coils registers and data - for(; ind <= Divide_Up(start_shift + modbus_msg->Qnt, 16); ind++) - { - //----SET MASK FOR COILS REGISTER---- - mask_for_coils = 0; - for(; shift < 0x10; shift++) - { - mask_for_coils |= 1<<(shift); // choose certain coil - if(++coil_cnt >= modbus_msg->Qnt) - break; - } - shift = 0; // set shift to zero for the next step - - //-----------READ COILS-------------- - modbus_msg->DATA[ind] = (*(coils+ind)&mask_for_coils) >> start_shift; - if(ind > 0) - modbus_msg->DATA[ind-1] |= ((*(coils+ind)&mask_for_coils) << 16) >> start_shift; - - } - // т.к. DATA 16-битная, для 8-битной передачи, надо поменять местами верхний и нижний байты - for(; ind >= 0; --ind) - modbus_msg->DATA[ind] = ByteSwap16(modbus_msg->DATA[ind]); - - return 1; -} - -/** - * @brief Proccess command Read Holding Registers (03 - 0x03). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Read Holding Registers. - */ -uint8_t MB_Read_Hold_Regs(RS_MsgTypeDef *modbus_msg) -{ - //---------CHECK FOR ERRORS---------- - // get origin address for data - uint16_t *pHoldRegs; - modbus_msg->Except_Code = MB_DefineRegistersAddress(&pHoldRegs, modbus_msg->Addr, modbus_msg->Qnt, NULL); // определение адреса регистров - if(modbus_msg->Except_Code != NO_ERRORS) - return 0; - - - //-----------READING REGS------------ - // setup output message data size - modbus_msg->ByteCnt = modbus_msg->Qnt*2; // *2 because we transmit 8 bits, not 16 bits - // read data - int i; - for (i = 0; iQnt; i++) - { - modbus_msg->DATA[i] = *(pHoldRegs++); - } - return 1; -} -/** - * @brief Proccess command Write Single Coils (05 - 0x05). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Write Single Coils. - */ -uint8_t MB_Write_Single_Coil(RS_MsgTypeDef *modbus_msg) -{ - //---------CHECK FOR ERRORS---------- - if ((modbus_msg->Qnt != 0x0000) && (modbus_msg->Qnt != 0xFF00)) - { - modbus_msg->Except_Code = ILLEGAL_DATA_VALUE; - return 0; - } - // define position of coil - uint16_t *coils; - uint16_t start_shift = 0; // shift in coils register - modbus_msg->Except_Code = MB_DefineCoilsAddress(&coils, modbus_msg->Addr, 0, &start_shift, 1); - if(modbus_msg->Except_Code != NO_ERRORS) - return 0; - - - //----------WRITTING COIL------------ - if(modbus_msg->Qnt == 0xFF00) - *(coils) |= 1<Except_Code = MB_DefineRegistersAddress(&pInputRegs, modbus_msg->Addr, 1, NULL); // определение адреса регистров - if(modbus_msg->Except_Code != NO_ERRORS) - return 0; - - //-----------WRITTING REG------------ - *(pInputRegs) = modbus_msg->Qnt; - return 1; -} - -/** - * @brief Proccess command Write Multiple Coils (15 - 0x0F). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Write Multiple Coils. - */ -uint8_t MB_Write_Miltuple_Coils(RS_MsgTypeDef *modbus_msg) -{ - //---------CHECK FOR ERRORS---------- - if (modbus_msg->ByteCnt != Divide_Up(modbus_msg->Qnt, 8)) - { // if quantity too large OR if quantity and bytes count arent match - modbus_msg->Except_Code = ILLEGAL_DATA_VALUE; - return 0; - } - // define position of coil - uint16_t *coils; // pointer to coils - uint16_t start_shift = 0; // shift in coils register - modbus_msg->Except_Code = MB_DefineCoilsAddress(&coils, modbus_msg->Addr, modbus_msg->Qnt, &start_shift, 1); - if(modbus_msg->Except_Code != NO_ERRORS) - return 0; - - //----------WRITTING COILS----------- - // create mask for coils - uint16_t mask_for_coils = 0; // mask for coils that've been chosen - uint32_t setted_coils = 0; // value of setted coils - uint16_t temp_reg = 0; // temp register for saving coils that hasnt been chosen - uint16_t coil_cnt = 0; // counter for processed coils - - // cycle until all registers with requered coils would be processed - int shift = start_shift; // set shift to first coil in first register - for(int ind = 0; ind <= Divide_Up(start_shift + modbus_msg->Qnt, 16); ind++) - { - //----SET MASK FOR COILS REGISTER---- - mask_for_coils = 0; - for(; shift < 0x10; shift++) - { - mask_for_coils |= 1<<(shift); // choose certain coil - if(++coil_cnt >= modbus_msg->Qnt) - break; - } - shift = 0; // set shift to zero for the next step - - - - //-----------WRITE COILS------------- - // get current coils - temp_reg = *(coils+ind); - // set coils - setted_coils = ByteSwap16(modbus_msg->DATA[ind]) << start_shift; - if(ind > 0) - { - setted_coils |= ((ByteSwap16(modbus_msg->DATA[ind-1]) << start_shift) >> 16); - } - // write coils - - *(coils+ind) = setted_coils & mask_for_coils; - // restore untouched coils - *(coils+ind) |= temp_reg&(~mask_for_coils); - - - if(coil_cnt >= modbus_msg->Qnt) // if all coils written - break cycle - break; // *kind of unnecessary - } - - return 1; -} - -/** - * @brief Proccess command Write Multiple Registers (16 - 0x10). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Write Multiple Registers. - */ -uint8_t MB_Write_Miltuple_Regs(RS_MsgTypeDef *modbus_msg) -{ - //---------CHECK FOR ERRORS---------- - if (modbus_msg->Qnt*2 != modbus_msg->ByteCnt) - { // if quantity and bytes count arent match - modbus_msg->Except_Code = 3; - return 0; - } - // get origin address for data - uint16_t *pInputRegs; - modbus_msg->Except_Code = MB_DefineRegistersAddress(&pInputRegs, modbus_msg->Addr, modbus_msg->Qnt, NULL); // определение адреса регистров - if(modbus_msg->Except_Code != NO_ERRORS) - return 0; - - //-----------WRITTING REGS----------- - for (int i = 0; iQnt; i++) - { - *(pInputRegs++) = modbus_msg->DATA[i]; - } - return 1; -} - - -/** - * @brief Respond accord to received message. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о результате ответа на комманду. - * @note Обработка принятой комманды и ответ на неё. - */ -RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hmodbus, RS_MsgTypeDef *modbus_msg) -{ - RS_StatusTypeDef MB_RES = 0; - hmodbus->fMessageHandled = 0; - hmodbus->fEchoResponse = 0; - RS_Reset_TX_Flags(hmodbus); // reset flag for correct transmit - - if(modbus_msg->Func_Code < ERR_VALUES_START)// if no errors after parsing - { - switch (modbus_msg->Func_Code) - { - // Read Coils - case MB_R_COILS: - hmodbus->fMessageHandled = MB_Read_Coils(hmodbus->pMessagePtr); - break; -// case MB_R_DISC_IN: break; - - // Read Hodling Registers - case MB_R_HOLD_REGS: - case MB_R_IN_REGS: - hmodbus->fMessageHandled = MB_Read_Hold_Regs(hmodbus->pMessagePtr); - break; - - - // Write Single Coils - case MB_W_COIL: - hmodbus->fMessageHandled = MB_Write_Single_Coil(hmodbus->pMessagePtr); - if(hmodbus->fMessageHandled) hmodbus->fEchoResponse = 1; // echo response if write ok - break; - - case MB_W_IN_REG: - hmodbus->fMessageHandled = MB_Write_Single_Reg(hmodbus->pMessagePtr); - if(hmodbus->fMessageHandled) hmodbus->fEchoResponse = 1; // echo response if write ok - break; - - // Write Multiple Coils - case MB_W_COILS: - hmodbus->fMessageHandled = MB_Write_Miltuple_Coils(hmodbus->pMessagePtr); - if(hmodbus->fMessageHandled) hmodbus->fEchoResponse = 1; hmodbus->RS_Message_Size = 6; // echo response if write ok (withous data bytes) - break; - - // Write Multiple Registers - case MB_W_IN_REGS: - hmodbus->fMessageHandled = MB_Write_Miltuple_Regs(hmodbus->pMessagePtr); - if(hmodbus->fMessageHandled) hmodbus->fEchoResponse = 1; hmodbus->RS_Message_Size = 6; // echo response if write ok (withous data bytes) - break; - - /* unknown func code */ - default: modbus_msg->Except_Code = 0x01; /* set exception code: illegal function */ - } - - if(hmodbus->fMessageHandled == 0) - modbus_msg->Func_Code += ERR_VALUES_START; - - - } - - // if we need response - check that transmit isnt busy - if( RS_Is_TX_Busy(hmodbus) ) - RS_Abort(hmodbus, ABORT_TX); // if tx busy - set it free - - // Transmit right there, or sets (fDeferredResponse) to transmit response in main code - MB_RES = RS_Handle_Transmit_Start(hmodbus, modbus_msg); - - hmodbus->RS_STATUS = MB_RES; - return MB_RES; -} - -/** - * @brief Collect message in buffer to transmit it. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @param msg_uart_buff - указатель на буффер UART. - * @return RS_RES - статус о результате заполнения буфера. - * @note Заполнение буффера UART из структуры сообщения. - */ -RS_StatusTypeDef Collect_Message(RS_HandleTypeDef *hmodbus, RS_MsgTypeDef *modbus_msg, uint8_t *modbus_uart_buff) -{ - int ind = 0; // ind for modbus-uart buffer - - if(hmodbus->fEchoResponse && hmodbus->fMessageHandled) // if echo response need - ind = hmodbus->RS_Message_Size; - else - { - //------INFO ABOUT DATA/MESSAGE------ - //-----------[first bytes]----------- - // set ID of message/user - modbus_uart_buff[ind++] = modbus_msg->MbAddr; - - // set dat or err response - modbus_uart_buff[ind++] = modbus_msg->Func_Code; - - if (modbus_msg->Func_Code < ERR_VALUES_START) // if no error occur - { - // set size of received data - if (modbus_msg->ByteCnt <= DATA_SIZE*2) // if ByteCnt less than DATA_SIZE - modbus_uart_buff[ind++] = modbus_msg->ByteCnt; - else // otherwise return data_size err - return RS_COLLECT_MSG_ERR; - - //---------------DATA---------------- - //-----------[data bytes]------------ - uint16_t *tmp_data_addr = (uint16_t *)modbus_msg->DATA; - for(int i = 0; i < modbus_msg->ByteCnt; i++) // filling buffer with data - { // set data - if (i%2 == 0) // HI byte - modbus_uart_buff[ind++] = (*tmp_data_addr)>>8; - else // LO byte - { - modbus_uart_buff[ind++] = *tmp_data_addr; - tmp_data_addr++; - } - } - } - else // if some error occur - { // send expection code - modbus_uart_buff[ind++] = modbus_msg->Except_Code; - } - } - //---------------CRC---------------- - //---------[last 16 bytes]---------- - // calc crc of received data - uint16_t CRC_VALUE = crc16(modbus_uart_buff, ind); - // write crc to message structure and modbus-uart buffer - modbus_msg->MB_CRC = CRC_VALUE; - modbus_uart_buff[ind++] = CRC_VALUE; - modbus_uart_buff[ind++] = CRC_VALUE >> 8; - - hmodbus->RS_Message_Size = ind; - - return RS_OK; // returns ok -} - -/** - * @brief Parse message from buffer to process it. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @param msg_uart_buff - указатель на буффер UART. - * @return RS_RES - статус о результате заполнения структуры. - * @note Заполнение структуры сообщения из буффера UART. - */ -RS_StatusTypeDef Parse_Message(RS_HandleTypeDef *hmodbus, RS_MsgTypeDef *modbus_msg, uint8_t *modbus_uart_buff) -{ - uint32_t check_empty_buff; - int ind = 0; // ind for modbus-uart buffer - //-----INFO ABOUT DATA/MESSAGE------- - //-----------[first bits]------------ - // get ID of message/user - modbus_msg->MbAddr = modbus_uart_buff[ind++]; - if(modbus_msg->MbAddr != hmodbus->ID) - return RS_SKIP; - - // get dat or err response - modbus_msg->Func_Code = modbus_uart_buff[ind++]; - - // get address from CMD - modbus_msg->Addr = modbus_uart_buff[ind++] << 8; - modbus_msg->Addr |= modbus_uart_buff[ind++]; - - // get address from CMD - modbus_msg->Qnt = modbus_uart_buff[ind++] << 8; - modbus_msg->Qnt |= modbus_uart_buff[ind++]; - - if(hmodbus->fRX_Half == 0) // if all message received - { - //---------------DATA---------------- - // (optional) - if (modbus_msg->ByteCnt != 0) - { - ind++; // increment ind for data_size byte - //check that data size is correct - if (modbus_msg->ByteCnt > DATA_SIZE) - { - // hmodbus->MB_RESPONSE = MB_DATA_SIZE_ERR; // set func code - error data size more than maximumif yes, set func code - error about empty message - modbus_msg->Func_Code += ERR_VALUES_START; - return RS_PARSE_MSG_ERR; - } - uint16_t *tmp_data_addr = (uint16_t *)modbus_msg->DATA; - for(int i = 0; i < modbus_msg->ByteCnt; i++) // /2 because we transmit 8 bits, not 16 bits - { // set data - if (i%2 == 0) - *tmp_data_addr = ((uint16_t)modbus_uart_buff[ind++] << 8); - else - { - *tmp_data_addr |= modbus_uart_buff[ind++]; - tmp_data_addr++; - } - } - } - - //---------------CRC---------------- - //----------[last 16 bits]---------- - // calc crc of received data - uint16_t CRC_VALUE = crc16(modbus_uart_buff, ind); - // get crc of received data - modbus_msg->MB_CRC = modbus_uart_buff[ind++]; - modbus_msg->MB_CRC |= modbus_uart_buff[ind++] << 8; - // compare crc - if (modbus_msg->MB_CRC != CRC_VALUE) - modbus_msg->Func_Code += ERR_VALUES_START; - // hmodbus->MB_RESPONSE = MB_CRC_ERR; // set func code - error about wrong crc - - // check is buffer empty - check_empty_buff = 0; - for(int i=0; iMB_RESPONSE = MB_EMPTY_MSG; // - } - - return RS_OK; - -} - -/** - * @brief Define size of RX Message that need to be received. - * @param hRS - указатель на хендлер RS. - * @param rx_data_size - указатель на переменную для записи кол-ва байт для принятия. - * @return RS_RES - статус о корректности рассчета кол-ва байт для принятия. - * @note Определение сколько байтов надо принять по протоколу. - */ -RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hmodbus, uint32_t *rx_data_size) -{ - RS_StatusTypeDef MB_RES = 0; - - MB_RES = Parse_Message(hmodbus, hmodbus->pMessagePtr, hmodbus->pBufferPtr); - if(MB_RES == RS_SKIP) // if message not for us - return MB_RES; // return - - if ((hmodbus->pMessagePtr->Func_Code & ~ERR_VALUES_START) < 0x0F) - { - hmodbus->pMessagePtr->ByteCnt = 0; - *rx_data_size = 1; - } - else - { - hmodbus->pMessagePtr->ByteCnt = hmodbus->pBufferPtr[RX_FIRST_PART_SIZE-1]; // get numb of data in command - // +1 because that defines is size, not ind. - *rx_data_size = hmodbus->pMessagePtr->ByteCnt + 2; - } - hmodbus->RS_Message_Size = RX_FIRST_PART_SIZE + *rx_data_size; // size of whole message - return RS_OK; -} - -//-----------------------------FOR USER------------------------------ -//------------------------------------------------------------------- - - - -//------------------------------------------------------------------- -//-------------------------HANDLERS FUNCTION------------------------- -#if (MODBUS_UART_NUMB == 1) // choose handler for UART -void USART1_IRQHandler(void) -#elif (MODBUS_UART_NUMB == 2) -void USART2_IRQHandler(void) -#elif (MODBUS_UART_NUMB == 3) -void USART3_IRQHandler(void) -#elif (MODBUS_UART_NUMB == 4) -void USART4_IRQHandler(void) -#elif (MODBUS_UART_NUMB == 5) -void USART5_IRQHandler(void) -#elif (MODBUS_UART_NUMB == 6) -void USART6_IRQHandler(void) -#endif -{ - Trace_MB_UART_Enter(); - RS_UART_Handler(&hmodbus1); - Trace_MB_UART_Exit(); -} -#if (MODBUS_TIM_NUMB == 1) || (MODBUS_TIM_NUMB == 10) // choose handler for TIM -void TIM1_UP_TIM10_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 2) -void TIM2_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 3) -void TIM3_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 4) -void TIM4_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 5) -void TIM5_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 6) -void TIM6_DAC_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 7) -void TIM7_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 8) || (MODBUS_TIM_NUMB == 13) -void TIM8_UP_TIM13_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 1) || (MODBUS_TIM_NUMB == 9) -void TIM1_BRK_TIM9_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 1) || (MODBUS_TIM_NUMB == 11) -void TIM1_TRG_COM_TIM11_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 8) || (MODBUS_TIM_NUMB == 12) -void TIM8_BRK_TIM12_IRQHandler(void) -#elif (MODBUS_TIM_NUMB == 8) || (MODBUS_TIM_NUMB == 14) -void TIM8_TRG_COM_TIM14_IRQHandler(void) -#endif -{ - Trace_MB_TIM_Enter(); - RS_TIM_Handler(&hmodbus1); - Trace_MB_TIM_Exit(); -} - -//-------------------------HANDLERS FUNCTION------------------------- -//------------------------------------------------------------------- diff --git a/Code/Modbus/modbus.h b/Code/Modbus/modbus.h deleted file mode 100644 index 0479966..0000000 --- a/Code/Modbus/modbus.h +++ /dev/null @@ -1,418 +0,0 @@ -/********************************MODBUS************************************* -Данный файл содержит объявления базовых функции и дефайны для реализации -MODBUS. -Данный файл необходимо подключить в rs_message.h. После подключать rs_message.h -к основному проекту. -***************************************************************************/ -#ifndef __MODBUS_H_ -#define __MODBUS_H_ - -#include "stm32f4xx_hal.h" -#include "modbus_data.h" -#include "settings.h" // for modbus settings -///////////////////////////////////////////////////////////////////// -//////////////////////////---SETTINGS---///////////////////////////// -////----------DEFINES FOR MODBUS SETTING-------------- -//#define MODBUS_UART_NUMB 3 // number of used uart -//#define MODBUS_SPEED 115200 -//#define MODBUS_GPIOX GPIOB -//#define MODBUS_GPIO_PIN_RX GPIO_PIN_11 -//#define MODBUS_GPIO_PIN_TX GPIO_PIN_10 -///* accord to this define sets define USED_MB_UART = USARTx */ -//#define MODBUS_TIM_NUMB 7 // number of used uart -//#define MODBUS_TIM_AHB_FREQ 72 -///* accord to this define sets define USED_MB_TIM = TIMx */ - -///* defines for modbus behaviour */ -//#define MODBUS_DEVICE_ID 1 // number of used uart -//#define MODBUS_MAX_TIMEOUT 5000 // is ms -//// custom define for size of receive message -////-------------------------------------------------- - -//---------------MODBUS DEVICE DATA----------------- -/* EXTERN REGISTERS/COILS */ - -extern uint16_t sine_log[R_SINE_LOG_QNT]; // start from 0x0000 -extern uint16_t pwm_log[R_PWM_LOG_QNT]; // start from 500 (0x1F4) -extern uint16_t cnt_log[R_CNT_LOG_QNT]; // start from 100 (0x3E8) -extern uint16_t time_log[R_TIME_LOG_QNT]; // start from 1500 (0x5DC) - -extern uint16_t pwm_ctrl[R_PWM_CTRL_QNT]; // start from 2000 (0x7D0) -extern uint16_t log_ctrl[R_LOG_CTRL_QNT]; // start from 2008 (0x7D0) - - -extern uint16_t uart_ctrl[R_UART_CTRL_QNT]; - -extern uint16_t coils_regs[C_CTRL_COILS_QNT]; // start from 0x0001 (16th bit) - -//-------------------------------------------------- -//////////////////////////---SETTINGS---///////////////////////////// - - -///////////////////////////////////////////////////////////////////// -/////////////////////---USER MESSAGE DEFINES---////////////////////// -//-------------DEFINES FOR STRUCTURE---------------- -/* defines for structure of modbus message */ -#define MbAddr_SIZE 1 // size of (MbAddr) -#define Func_Code_SIZE 1 // size of (Func_Code) -#define Addr_SIZE 2 // size of (Addr) -#define Qnt_SIZE 2 // size of (Qnt) -#define ByteCnt_SIZE 1 // size of (ByteCnt) -#define DATA_SIZE 125 // maximum number of data: DWORD (NOT MESSAGE SIZE) -#define CRC_SIZE 2 // size of (MB_CRC) in bytes - -/* size of info */ -#define INFO_SIZE_MAX (MbAddr_SIZE+Func_Code_SIZE+Addr_SIZE+Qnt_SIZE+ByteCnt_SIZE) - -/* size of first part of message that will be received -first receive info part of message, than defines size of rest message*/ -#define RX_FIRST_PART_SIZE INFO_SIZE_MAX - -/* size of buffer: max size of whole message */ -#define MSG_SIZE_MAX (INFO_SIZE_MAX + DATA_SIZE*2 + CRC_SIZE) // max possible size of message - -/* Structure for modbus exception codes */ -typedef enum //MB_ExceptionTypeDef -{ - // reading - NO_ERRORS = 0x00, // no errors - ILLEGAL_FUNCTION = 0x01, // function cannot be processed - ILLEGAL_DATA_ADDRESS = 0x02, // data at this address is not available - ILLEGAL_DATA_VALUE = 0x03, // uncorrect data value (quantity too big and cannot be returned or value for coil is incorrect) - SLAVE_DEVICE_FAILURE = 0x04, // idk - ACKNOWLEDGE = 0x05, // idk - SLAVE_DEVICE_BUSY = 0x06, // idk - MEMORY_PARITY_ERROR = 0x08, // idk -}MB_ExceptionTypeDef; - -/* Structure for modbus func codes */ -typedef enum //MB_FunctonTypeDef -{ - // reading - MB_R_COILS = 0x01, - MB_R_DISC_IN = 0x02, - MB_R_IN_REGS = 0x03, - MB_R_HOLD_REGS = 0x04, - - // writting - MB_W_COIL = 0x05, - MB_W_IN_REG = 0x06, - MB_W_COILS = 0x0F, - MB_W_IN_REGS = 0x10, -}MB_FunctonTypeDef; -#define ERR_VALUES_START 0x80U // from this value starts error func codes - -/* Structure for modbus messsage */ -typedef struct // RS_MsgTypeDef -{ - uint8_t MbAddr; - MB_FunctonTypeDef Func_Code; - uint16_t Addr; - uint16_t Qnt; - uint8_t ByteCnt; - - uint16_t DATA[DATA_SIZE]; - MB_ExceptionTypeDef Except_Code; - - uint16_t MB_CRC; -}RS_MsgTypeDef; -//-------------------------------------------------- -/////////////////////---USER MESSAGE DEFINES---////////////////////// - - - -///////////////////////////////////////////////////////////////////// -/////////////////////---GENERAL MODBUS STUFF---////////////////////// -/* Structure for coils operation */ -typedef enum -{ -// READ_COIL, - SET_COIL, - RESET_COIL, - TOOGLE_COIL, -}MB_CoilsOpTypeDef; - -//------------DEFINES FOR PROCESS DATA-------------- -/** - * @brief Calc dividing including remainder - * @param _val_ - делимое. - * @param _div_ - делитель. - * @note Если результат деления без остатка: он возвращается как есть - Если с остатком - округляется вверх - */ -//#define Divide_Up(_val_, _div_) (((_val_)%(_div_))? (_val_)/(_div_)+1 : (_val_)/_div_) /* через тернарный оператор */ -#define Divide_Up(_val_, _div_) ((_val_ - 1) / _div_) + 1 /* через мат выражение */ - -/** - * @brief Swap between Little Endian and Big Endian - * @param v - Переменная для свапа. - * @return v (new) - Свапнутая переменная. - * @note Переключения между двумя типами хранения слова: HI-LO байты и LO-HI байты. - */ -#define ByteSwap16(v) (((v&0xFF00) >> (8)) | ((v&0x00FF) << (8))) -//-------------------------------------------------- - - -//-----------DEFINES FOR ACCESS TO DATA------------- -/** - * @brief Macros to set pointer to 16-bit array - * @param _arr_ - массив слов (16-бит). - */ -#define MB_Set_Arr16_Ptr(_arr_) ((uint16_t*)(&(_arr_))) -/** - * @brief Macros to set pointer to register - * @param _parr_ - массив регистров. - * @param _addr_ - Номер регистра (его индекс) от начала массива _arr_. - */ -#define MB_Set_Register_Ptr(_parr_, _addr_) ((uint16_t *)(_parr_)+(_addr_)) - -/** - * @brief Macros to set pointer to a certain register that contains certain coil - * @param _parr_ - массив коилов. - * @param _coil_ - Номер коила от начала массива _arr_. - * @note Пояснение выражений - * (_coil_/16) - get index (address shift) of register that contain certain coil - * (16*(_coil_/16) - how many coils we need to skip. e.g. (16*30/16) - skip 16 coils from first register - * _coil_-(16*(_coil_/16)) - shift to certain coil in certain register - * e.g. Coil(30) gets in register[1] (30/16 = 1) coil №14 (30 - (16*30/16) = 30 - 16 = 14) - * - * Visual explanation: - * xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxCx - * |register[0]----| |register[1]----| - * |skip this------| |get this-------| - * |shift to 14 bit| - */ -#define MB_Set_Coil_Reg_Ptr(_parr_, _coil_) ((uint16_t *)(_parr_)+((_coil_)/16)) -#define MB_Set_Coil_Mask(_coil_) (1 << ( _coil_ - (16*((_coil_)/16)) )) - -/** - * @brief Read Coil at its local address. - * @param _parr_ - массив коилов. - * @param _coil_ - Номер коила от начала массива _arr_. - * @return uint16_t - Возвращает весь регистр с маской на запрошенном коиле. - * - * @note Позволяет обратиться к коилу по адресу относительно _arr_. - */ -#define MB_Read_Coil_Local(_parr_, _coil_) (( *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) & MB_Set_Coil_Mask(_coil_) ) >> _coil_) -/** - * @brief Set Coil at its local address. - * @param _parr_ - указатель на массив коилов. - * @param _coil_ - Номер коила от начала массива _arr_. - * - * @note Позволяет обратиться к коилу по адресу относительно _arr_. - */ -#define MB_Set_Coil_Local(_parr_, _coil_) *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) |= MB_Set_Coil_Mask(_coil_) -/** - * @brief Reset Coil at its local address. - * @param _parr_ - указатель на массив коилов. - * @param _coil_ - Номер коила от начала массива _arr_. - * - * @note Позволяет обратиться к коилу по адресу относительно _arr_. - */ -#define MB_Reset_Coil_Local(_parr_, _coil_) *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) &= ~(MB_Set_Coil_Mask(_coil_)) -/** - * @brief Set Coil at its local address. - * @param _parr_ - указатель на массив коилов. - * @param _coil_ - Номер коила от начала массива _arr_. - * - * @note Позволяет обратиться к коилу по адресу относительно _arr_. - */ -#define MB_Toogle_Coil_Local(_parr_, _coil_) *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) ^= MB_Set_Coil_Mask(_coil_) -//-------------------------------------------------- - - -//------------------OTHER DEFINES------------------- -// create hadnles and settings for uart, tim, rs with _modbus_ name -#define CONCAT(a,b) a##b -#define Create_MODBUS_Handles(_modbus_) \ - UART_SettingsTypeDef CONCAT(_modbus_, _suart); \ - UART_HandleTypeDef CONCAT(_modbus_, _huart); \ - TIM_SettingsTypeDef CONCAT(_modbus_, _stim); \ - TIM_HandleTypeDef CONCAT(_modbus_, _htim); \ - RS_HandleTypeDef CONCAT(h, _modbus_) -//-------------------------------------------------- -///////////////////---MODBUS & MESSAGE DEFINES---//////////////////// - - - -///////////////////////////////////////////////////////////////////// -////////////////////---FUNCTIONS FOR USER---///////////////////////// -/** - * @brief First set up of MODBUS. - * @note Первый инит модбас. Заполняет структуры и инициализирует таймер и юарт для общения по модбас. - * Скважность ШИМ меняется по закону синусоиды, каждый канал генерирует свой полупериод синуса (от -1 до 0 И от 0 до 1) - * ШИМ генерируется на одном канале. - * @note This called from main - */ -void MODBUS_FirstInit(void); -/** - * @brief Set or Reset Coil at its global address. - * @param Addr - адрес коила. - * @param WriteVal - Что записать в коил: 0 или 1. - * @return ExceptionCode - Код исключения если коила по адресу не существует, и NO_ERRORS если все ок. - * - * @note Позволяет обратиться к любому коилу по его глобальному адрессу. - Вне зависимости от того как коилы размещены в памяти. - */ -MB_ExceptionTypeDef MB_Write_Coil_Global(uint16_t Addr, MB_CoilsOpTypeDef WriteVal); -/** - * @brief Read Coil at its global address. - * @param Addr - адрес коила. - * @param Exception - Указатель на переменную для кода исключения, в случа неудачи при чтении. - * @return uint16_t - Возвращает весь регистр с маской на запрошенном коиле. - * - * @note Позволяет обратиться к любому коилу по его глобальному адрессу. - Вне зависимости от того как коилы размещены в памяти. - */ -uint16_t MB_Read_Coil_Global(uint16_t Addr, MB_ExceptionTypeDef *Exception); -////////////////////---FUNCTIONS FOR USER---///////////////////////// - - - -///////////////////////////////////////////////////////////////////// -/////////////---PROCESS MODBUS COMMAND FUNCTIONS---////////////////// -/** - * @brief Check is address valid for certain array. - * @param Addr - начальный адресс. - * @param Qnt - количество запрашиваемых элементов. - * @param R_ARR_ADDR - начальный адресс массива R_ARR. - * @param R_ARR_NUMB - количество элементов в массиве R_ARR. - * @return ExceptionCode - ILLEGAL DATA ADRESS если адресс недействителен, и NO_ERRORS если все ок. - * - * @note Позволяет определить, брать ли данные по адрессу Addr из массива R_ARR. - * Если адресс Addr находится в диапазоне адрессов массива R_ARR, то возвращаем NO_ERROR. - * Если адресс Addr находится за пределами адрессов массива R_ARR - ILLEGAL_DATA_ADDRESSю. - */ -MB_ExceptionTypeDef MB_Check_Address_For_Arr(uint16_t Addr, uint16_t Qnt, uint16_t R_ARR_ADDR, uint16_t R_ARR_NUMB); -/** - * @brief Define Address Origin for Input/Holding Registers - * @param pRegs - указатель на указатель регистров. - * @param Addr - адрес начального регистра. - * @param Qnt - количество запрашиваемых регистров. - * @param WriteFlag - флаг регистр нужны для чтения или записи. - * @return ExceptionCode - Код исключения если есть, и NO_ERRORS если нет. - * - * @note Определение адреса начального регистра. - * @note WriteFlag пока не используется. - */ -MB_ExceptionTypeDef MB_DefineRegistersAddress(uint16_t **pRegs, uint16_t Addr, uint16_t Qnt, uint8_t WriteFlag); -/** - * @brief Define Address Origin for coils - * @param pCoils - указатель на указатель коилов. - * @param Addr - адресс начального коила. - * @param Qnt - количество запрашиваемых коилов. - * @param start_shift - указатель на переменную содержащую сдвиг внутри регистра для начального коила. - * @param WriteFlag - флаг коилы нужны для чтения или записи. - * @return ExceptionCode - Код исключения если есть, и NO_ERRORS если нет. - * - * @note Определение адреса начального регистра запрашиваемых коилов. - * @note WriteFlag используется для определния регистров GPIO: ODR или IDR. - */ -MB_ExceptionTypeDef MB_DefineCoilsAddress(uint16_t **pCoils, uint16_t Addr, uint16_t Qnt, uint16_t *start_shift, uint8_t WriteFlag); -/** - * @brief Proccess command Read Coils (01 - 0x01). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Read Coils. -*/ -uint8_t MB_Read_Coils(RS_MsgTypeDef *modbus_msg); -/** - * @brief Proccess command Read Holding Registers (03 - 0x03). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Read Holding Registers. -*/ -uint8_t MB_Read_Hold_Regs(RS_MsgTypeDef *modbus_msg); -/** - * @brief Proccess command Write Single Coils (05 - 0x05). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Write Single Coils. -*/ -uint8_t MB_Write_Single_Coil(RS_MsgTypeDef *modbus_msg); -/** - * @brief Proccess command Write Multiple Coils (15 - 0x0F). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Write Multiple Coils. -*/ -uint8_t MB_Write_Miltuple_Coils(RS_MsgTypeDef *modbus_msg); -/** - * @brief Proccess command Write Multiple Register (16 - 0x10). - * @param modbus_msg - указатель на структуру собщения modbus. - * @return fMessageHandled - статус о результате обработки комманды. - * @note Обработка команды Write Multiple Register. - */ -uint8_t MB_Write_Miltuple_Regs(RS_MsgTypeDef *modbus_msg); -/////////////---PROCESS MODBUS COMMAND FUNCTIONS---////////////////// - -///////////////////////////////////////////////////////////////////// -/////////////////////////---CALC DEFINES---////////////////////////// - -/* set USART_TypeDef for choosen numb of usart */ -#if (MODBUS_UART_NUMB == 1) - #define USED_MODBUS_UART USART1 - #define USE_USART1 -#elif (MODBUS_UART_NUMB == 2) - #define USED_MODBUS_UART USART2 - #define USE_USART2 -#elif (MODBUS_UART_NUMB == 3) - #define USED_MODBUS_UART USART3 - #define USE_USART3 -#elif (MODBUS_UART_NUMB == 4) - #define USED_MODBUS_UART UART4 - #define USE_UART4 -#elif (MODBUS_UART_NUMB == 5) - #define USED_MODBUS_UART UART5 - #define USE_UART6 -#elif (MODBUS_UART_NUMB == 6) - #define USED_MODBUS_UART USART6 - #define USE_USART6 -#endif - -#if (MODBUS_TIM_NUMB == 1) - #define USED_MODBUS_TIM TIM1 - #define USE_TIM1 -#elif (MODBUS_TIM_NUMB == 2) - #define USED_MODBUS_TIM TIM2 - #define USE_TIM2 -#elif (MODBUS_TIM_NUMB == 3) - #define USED_MODBUS_TIM TIM3 - #define USE_TIM3 -#elif (MODBUS_TIM_NUMB == 4) - #define USED_MODBUS_TIM TIM4 - #define USE_TIM4 -#elif (MODBUS_TIM_NUMB == 5) - #define USED_MODBUS_TIM TIM5 - #define USE_TIM5 -#elif (MODBUS_TIM_NUMB == 6) - #define USED_MODBUS_TIM TIM6 - #define USE_TIM6 -#elif (MODBUS_TIM_NUMB == 7) - #define USED_MODBUS_TIM TIM7 - #define USE_TIM7 -#elif (MODBUS_TIM_NUMB == 8) - #define USED_MODBUS_TIM TIM8 - #define USE_TIM8 -#elif (MODBUS_TIM_NUMB == 9) - #define USED_MODBUS_TIM TIM9 - #define USE_TIM9 -#elif (MODBUS_TIM_NUMB == 10) - #define USED_MODBUS_TIM TIM10 - #define USE_TIM10 -#elif (MODBUS_TIM_NUMB == 11) - #define USED_MODBUS_TIM TIM11 - #define USE_TIM11 -#elif (MODBUS_TIM_NUMB == 12) - #define USED_MODBUS_TIM TIM12 - #define USE_TIM12 -#elif (MODBUS_TIM_NUMB == 13) - #define USED_MODBUS_TIM TIM13 - #define USE_TIM13 -#elif (MODBUS_TIM_NUMB == 14) - #define USED_MODBUS_TIM TIM14 - #define USE_TIM14 -#endif - - -#endif //__MODBUS_H_ \ No newline at end of file diff --git a/Code/Modbus/modbus_data.h b/Code/Modbus/modbus_data.h deleted file mode 100644 index 1686fc6..0000000 --- a/Code/Modbus/modbus_data.h +++ /dev/null @@ -1,71 +0,0 @@ -//-----------MODBUS DEVICE DATA SETTING------------- -//--------------DEFINES FOR REGISTERS--------------- -// DEFINES FOR ARRAYS -#define LOG_SIZE 500 - -#define R_SINE_LOG_ADDR 0 -#define R_SINE_LOG_QNT LOG_SIZE - -#define R_PWM_LOG_ADDR 500 -#define R_PWM_LOG_QNT LOG_SIZE - -#define R_CNT_LOG_ADDR 1000 -#define R_CNT_LOG_QNT LOG_SIZE - -#define R_TIME_LOG_ADDR 1500 -#define R_TIME_LOG_QNT LOG_SIZE - - -#define R_SETTINGS_START_ADDR 20000 - -#define R_PWM_CTRL_ADDR R_SETTINGS_START_ADDR -#define R_PWM_CTRL_QNT 8 - -#define R_LOG_CTRL_ADDR (R_SETTINGS_START_ADDR+8) -#define R_LOG_CTRL_QNT 8 - -#define R_UART_CTRL_ADDR R_SETTINGS_START_ADDR+16 -#define R_UART_CTRL_QNT 8 - -// DEFINES FOR REGISTERS - -#define R_PWM_CTRL_PWM_VALUE 0 // PWM value: sin freq OR pwm duty -#define R_PWM_CTRL_PWM_HZ 1 // frequency of PWM Timer -#define R_PWM_CTRL_MIN_PULSE_DUR 2 // duration of shortest pulse in sine PWM -#define R_PWM_CTRL_DEAD_TIME 3 // duration between between switches half waves (channels) -#define R_PWM_CTRL_SIN_TABLE_SIZE 4 // size of sinus table - -#define R_LOG_CTRL_LOG_SIZE 0 // size of number elements in log -#define R_LOG_CTRL_LOG_PWM_NUMB 1 // number of PWM periods in log -#define R_LOG_CTRL_LOG_HZ 2 // frequency of log Timer - -#define R_UART_CTRL_SPEED 0 // sin frequency - - -//----------------DEFINES FOR COILS----------------- -// DEFINES FOR ARRAYS -#define C_GPIOD_ADDR 0 -#define C_GPIOD_QNT 16 // minimum 16 - -#define C_CTRL_COILS_ADDR 0x10 -#define C_CTRL_COILS_QNT 160 // minimum 16 - - -// DEFINES FOR COILS -#define COIL_GPIOD_LED1 12 -#define COIL_GPIOD_LED2 13 -#define COIL_GPIOD_LED3 14 -#define COIL_GPIOD_LED4 15 -#define COIL_GPIOD_LED1_GLOBAL (C_GPIOD_ADDR+COIL_GPIOD_LED1) -#define COIL_GPIOD_LED2_GLOBAL (C_GPIOD_ADDR+COIL_GPIOD_LED2) -#define COIL_GPIOD_LED3_GLOBAL (C_GPIOD_ADDR+COIL_GPIOD_LED3) -#define COIL_GPIOD_LED4_GLOBAL (C_GPIOD_ADDR+COIL_GPIOD_LED4) - -#define COIL_UART_CTRL (0) -#define COIL_UART_CTRL_GLOBAL (C_CTRL_COILS_ADDR+COIL_UART_CTRL) -#define COIL_PWM_DC_MODE (1) -#define COIL_PWM_DC_MODE_GLOBAL (C_CTRL_COILS_ADDR+COIL_PWM_DC_MODE) -#define COIL_PWM_CH_MODE (2) -#define COIL_PWM_CH_MODE_GLOBAL (C_CTRL_COILS_ADDR+COIL_PWM_CH_MODE) -#define COIL_PWM_PHASE_MODE (3) -#define COIL_PWM_PHASE_MODE_GLOBAL (C_CTRL_COILS_ADDR+COIL_PWM_PHASE_MODE) \ No newline at end of file diff --git a/Code/Modbus/rs_message.c b/Code/Modbus/rs_message.c deleted file mode 100644 index c921ffb..0000000 --- a/Code/Modbus/rs_message.c +++ /dev/null @@ -1,502 +0,0 @@ -/**********************************RS*************************************** -Данный файл содержит базовые функции для реализации протоколов по RS/UART. -//-------------------Функции-------------------// -@func users - - Parse_Message/Collect_Message Заполнение структуры сообщения и буфера - - RS_Response Ответ на сообщение - - RS_Define_Size_of_RX_Message Определение размера принимаемых данных - -@func general - - RS_Receive_IT Ожидание комманды и ответ на неё - - RS_Transmit_IT Отправление комманды и ожидание ответа - - RS_Init Инициализация переферии и структуры для RS - - RS_ReInit_UART Реинициализация UART для RS - - RS_Abort Отмена приема/передачи по ЮАРТ - - RS_Init Инициализация периферии и modbus handler - -@func callback/handler - - RS_Handle_Receive_Start Функция для запуска приема или остановки RS - - RS_Handle_Transmit_Start Функция для запуска передачи или остановки RS - - - RS_UART_RxCpltCallback Коллбек при окончании приема или передачи - RS_UART_TxCpltCallback - - - RS_UART_Handler Обработчик прерывания для UART - - RS_TIM_Handler Обработчик прерывания для TIM - -@func uart initialize (это было в отдельных файлах, мб надо обратно разнести) - - UART_Base_Init Инициализация UART для RS - - RS_UART_GPIO_Init Инициализация GPIO для RS - - UART_DMA_Init Инициализация DMA для RS - - UART_MspInit Аналог HAL_MspInit для RS - - UART_MspDeInit Аналог HAL_MspDeInit для RS - -//-------------------Общее--------------------// -@note Для настройки RS/UART под нужный протокол, необходимо: - - Определить структуру сообщения RS_MsgTypeDef и - дефайны RX_FIRST_PART_SIZE и MSG_SIZE_MAX. - - Подключить этот файл в раздел USER SETTINGS rs_message.h. - - Определить функции для обработки сообщения @func users. - - Добавить UART/TIM Handler в Хендлер используемых UART/TIM. -***************************************************************************/ -#include "rs_message.h" - -uint8_t RS_Buffer[MSG_SIZE_MAX]; // uart buffer - -//------------------------------------------------------------------- -//-------------------------GENERAL FUNCTIONS------------------------- -/** - * @brief Start receive IT. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации приема. - */ -RS_StatusTypeDef RS_Receive_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg) -{ - RS_StatusTypeDef RS_RES = 0; - HAL_StatusTypeDef uart_res = 0; - - //-------------CHECK RS LINE---------------- - // check that receive isnt busy - if( RS_Is_RX_Busy(hRS) ) // if tx busy - return busy status - return RS_BUSY; - - //-----------INITIALIZE RECEIVE------------- - // if all OK: start receiving - RS_Set_Busy(hRS); // set RS busy - RS_Set_RX_Flags(hRS); // initialize flags for receive - hRS->pMessagePtr = RS_msg; // set pointer to message structire for filling it from UARTHandler fucntions - - // start receiving - uart_res = HAL_UART_Receive_IT(hRS->huart, hRS->pBufferPtr, RX_FIRST_PART_SIZE); // receive until ByteCnt+1 byte, - // then in Callback restart receive for rest bytes - - // if receive isnt started - abort RS - if(uart_res != HAL_OK) - { - RS_RES = RS_Abort(hRS, ABORT_RS); - } - else - RS_RES = RS_OK; - - hRS->RS_STATUS = RS_RES; - return RS_RES; // returns result of receive init -} - -/** - * @brief Start transmit IT. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации передачи. - */ -RS_StatusTypeDef RS_Transmit_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg) -{ - RS_StatusTypeDef RS_RES = 0; - HAL_StatusTypeDef uart_res = 0; - - //-------------CHECK RS LINE---------------- - // check that transmit isnt busy - if( RS_Is_TX_Busy(hRS) ) // if tx busy - return busy status - return RS_BUSY; - // check receive line - - - //------------COLLECT MESSAGE--------------- - RS_RES = Collect_Message(hRS, RS_msg, hRS->pBufferPtr); - if (RS_RES != RS_OK) // if message isnt collect - stop RS and return error in RS_RES - {// need collect message status, so doesnt write abort to RS_RES - RS_Abort(hRS, ABORT_RS); - RS_Handle_Receive_Start(hRS, hRS->pMessagePtr); // restart receive - } - else // if collect successful - { - - //----------INITIALIZE TRANSMIT------------- - RS_Set_Busy(hRS); // set RS busy - RS_Set_TX_Flags(hRS); // initialize flags for transmit IT - hRS->pMessagePtr = RS_msg; // set pointer for filling given structure from UARTHandler fucntion - - // if all OK: start transmitting - uart_res = HAL_UART_Transmit_IT(hRS->huart, hRS->pBufferPtr, hRS->RS_Message_Size); - // if transmit isnt started - abort RS - if(uart_res != HAL_OK) - { - RS_RES = RS_Abort(hRS, ABORT_RS); - } - else - RS_RES = RS_OK; - } - - - hRS->RS_STATUS = RS_RES; - return RS_RES; // returns result of transmit init -} - -/** - * @brief Initialize UART and handle RS stucture. - * @param hRS - указатель на хендлер RS. - * @param suart - указатель на структуру с настройками UART. - * @param stim - указатель на структуру с настройками таймера. - * @param pRS_BufferPtr - указатель на буффер для приема-передачи по UART. Если он NULL, то поставиться библиотечный буфер. - * @return RS_RES - статус о состоянии RS после инициализации. - * @note Инициализация перефирии и структуры для приема-передачи по RS. - */ -RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart, TIM_SettingsTypeDef *stim, uint8_t *pRS_BufferPtr) -{ - // check that hRS is defined - if (hRS == NULL) - return RS_ERR; - - // check that huart is defined - if ((suart->huart.Instance == NULL) || (suart->huart.Init.BaudRate == NULL)) - return RS_ERR; - - // init uart - UART_Base_Init(suart); - hRS->huart = &suart->huart; - - - - // check that timeout in interrupt needed - if (hRS->sRS_Timeout) - { - if (stim->htim.Instance == NULL) // check is timer defined - return RS_ERR; - - // calc frequency corresponding to timeout and tims 1ms tickbase - stim->sTickBaseMHz = TIM_TickBase_1MS; - stim->htim.Init.Period = hRS->sRS_Timeout; - - TIM_Base_Init(stim); - hRS->htim = &stim->htim; - } - - if (hRS->sRS_RX_Size_Mode == NULL) - return RS_ERR; - - // check that buffer is defined - if (hRS->pBufferPtr == NULL) - { - hRS->pBufferPtr = RS_Buffer; // if no - set default - } - else - hRS->pBufferPtr = pRS_BufferPtr; // if yes - set by user - - return RS_OK; -} - -/** - * @brief ReInitialize UART and RS receive. - * @param hRS - указатель на хендлер RS. - * @param suart - указатель на структуру с настройками UART. - * @return RS_RES - статус о состоянии RS после инициализации. - * @note Реинициализация UART и приема по RS. - */ -HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart) -{ - HAL_StatusTypeDef RS_RES; - hRS->fReInit_UART = 0; - - // check is settings are valid - if(Check_UART_Init_Struct(suart) != HAL_OK) - return HAL_ERROR; - - RS_Abort(hRS, ABORT_RS); - UART_MspDeInit(&suart->huart); - RS_RES = UART_Base_Init(suart); - - - RS_Receive_IT(hRS, hRS->pMessagePtr); - return RS_RES; -} - - -/** - * @brief Abort RS/UART. - * @param hRS - указатель на хендлер RS. - * @param AbortMode - выбор, что надо отменить. - - ABORT_TX: Отмена передачи по ЮАРТ, с очищением флагов TX, - - ABORT_RX: Отмена приема по ЮАРТ, с очищением флагов RX, - - ABORT_RX_TX: Отмена приема и передачи по ЮАРТ, - - ABORT_RS: Отмена приема-передачи RS, с очищением всей структуры. - * @return RS_RES - статус о состоянии RS после аборта. - * @note Отмена работы UART в целом или отмена приема/передачи RS. - Также очищается хендл hRS. - */ -RS_StatusTypeDef RS_Abort(RS_HandleTypeDef *hRS, RS_AbortTypeDef AbortMode) -{ - HAL_StatusTypeDef uart_res = 0; - hRS->htim->Instance->CNT = 0; - __HAL_TIM_CLEAR_IT(hRS->htim, TIM_IT_UPDATE); - - if(hRS->sRS_Timeout) // if timeout setted - HAL_TIM_Base_Stop_IT(hRS->htim); // stop timeout - - if((AbortMode&ABORT_RS) == 0x00) - { - if((AbortMode&ABORT_RX) == ABORT_RX) - { - uart_res = HAL_UART_AbortReceive(hRS->huart); // abort receive - RS_Reset_RX_Flags(hRS); - } - - if((AbortMode&ABORT_TX) == ABORT_TX) - { - uart_res = HAL_UART_AbortTransmit(hRS->huart); // abort transmit - RS_Reset_TX_Flags(hRS); - } - } - else - { - uart_res = HAL_UART_Abort(hRS->huart); - RS_Clear_All(hRS); - } - hRS->RS_STATUS = RS_ABORTED; - return RS_ABORTED; -} - - -//-------------------------GENERAL FUNCTIONS------------------------- -//------------------------------------------------------------------- - - - -//------------------------------------------------------------------- -//--------------------CALLBACK/HANDLER FUNCTIONS--------------------- -/** - * @brief Handle for starting receive. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации приема или окончания общения. - * @note Определяет начинать прием команды/ответа или нет. - */ -RS_StatusTypeDef RS_Handle_Receive_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg) -{ - RS_StatusTypeDef RS_RES = 0; - - switch(hRS->sRS_Mode) - { - case SLAVE_ALWAYS_WAIT: // in slave mode with permanent waiting - RS_RES = RS_Receive_IT(hRS, RS_msg); break; // start receiving again - case SLAVE_TIMEOUT_WAIT: // in slave mode with timeout waiting (start receiving cmd by request) - RS_Set_Free(hRS); RS_RES = RS_OK; break; // end RS communication (set RS unbusy) - } - - return RS_RES; -} -/** - * @brief Handle for starting transmit. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации передачи. - * @note Определяет отвечать ли на команду или нет. - */ -RS_StatusTypeDef RS_Handle_Transmit_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg) -{ - RS_StatusTypeDef RS_RES = 0; - - switch(hRS->sRS_Mode) - { - case SLAVE_ALWAYS_WAIT: // in slave mode always response - case SLAVE_TIMEOUT_WAIT: // transmit response - RS_RES = RS_Transmit_IT(hRS, RS_msg); break; - } - return RS_RES; -} - -/** - * @brief UART RX Callback: define behaviour after receiving parts of message. - * @param hRS - указатель на хендлер RS. - * @return RS_RES - статус о состоянии RS после обработки приема. - * @note Контролирует прием сообщения: определяет размер принимаемой посылки и обрабатывает его. - */ -RS_StatusTypeDef RS_UART_RxCpltCallback(RS_HandleTypeDef *hRS) -{ - RS_StatusTypeDef RS_RES = 0; - HAL_StatusTypeDef uart_res = 0; - - // if we had received bytes before ByteCnt - if((hRS->sRS_RX_Size_Mode == RS_RX_Size_NotConst) && (hRS->fRX_Half == 0)) // if data size isnt constant and its first half, and - { // First receive part of message, then define size of rest of message, and start receive it - hRS->fRX_Half = 1; - //---------------FIND DATA SIZE----------------- - uint32_t NuRS_of_Rest_Bytes = 0; - RS_RES = RS_Define_Size_of_RX_Message(hRS, &NuRS_of_Rest_Bytes); - - - // if there is no bytes to receive OR we need to skip this message - restart receive - if ((NuRS_of_Rest_Bytes == 0) || (RS_RES == RS_SKIP)) - { - RS_Abort(hRS, ABORT_RX); - RS_RES = RS_Handle_Receive_Start(hRS, hRS->pMessagePtr); - return RS_RES; - } - - //-------------START UART RECEIVE--------------- - uart_res = HAL_UART_Receive_IT(hRS->huart, (hRS->pBufferPtr + RX_FIRST_PART_SIZE), NuRS_of_Rest_Bytes); - - if(uart_res != HAL_OK) - {// need uart status, so doesnt write abort to RS_RES - RS_RES = RS_Abort(hRS, ABORT_RS); - } - else - RS_RES = RS_OK; - } - else // if we had received whole message - { - hRS->fRX_Half = 0; - - //---------PROCESS DATA & ENDING RECEIVING-------- - RS_Set_RX_End(hRS); - - if(hRS->sRS_Timeout) // if timeout setted - HAL_TIM_Base_Stop_IT(hRS->htim); // stop timeout - - // parse received data - RS_RES = Parse_Message(hRS, hRS->pMessagePtr, hRS->pBufferPtr); // parse message - - // RESPONSE - RS_RES = RS_Response(hRS, hRS->pMessagePtr); - } - - return RS_RES; -} - - -/** - * @brief UART TX Callback: define behaviour after transmiting message. - * @param hRS - указатель на хендлер RS. - * @return RS_RES - статус о состоянии RS после обработки приема. - * @note Определяет поведение RS после передачи сообщения. - */ -RS_StatusTypeDef RS_UART_TxCpltCallback(RS_HandleTypeDef *hRS) -{ - RS_StatusTypeDef RS_RES = RS_OK; - HAL_StatusTypeDef uart_res = 0; - - //--------------ENDING TRANSMITTING------------- - RS_Set_TX_End(hRS); - - //-----------START RECEIVING or END RS---------- - RS_RES = RS_Handle_Receive_Start(hRS, hRS->pMessagePtr); - - return RS_RES; -} - -/** - * @brief Handler for UART. - * @param hRS - указатель на хендлер RS. - * @note Обрабатывает ошибки если есть и вызывает RS Коллбеки. - * Добавить вызов этой функции в UARTx_IRQHandler(). - */ -void RS_UART_Handler(RS_HandleTypeDef *hRS) -{ - HAL_UART_IRQHandler(hRS->huart); - //-------------CALL RS CALLBACKS------------ - /* IF NO ERROR OCCURS */ - if(hRS->huart->ErrorCode == 0) - { - hRS->htim->Instance->CNT = 0; // reset cnt; - /* Start timeout */ - if(hRS->sRS_Timeout) // if timeout setted - if((hRS->huart->RxXferCount+1 == hRS->huart->RxXferSize) && RS_Is_RX_Busy(hRS)) // if first byte is received and receive is active - HAL_TIM_Base_Start_IT(hRS->htim); - - /* RX Callback */ - if (( hRS->huart->RxXferCount == 0U) && RS_Is_RX_Busy(hRS) && // if all bytes are received and receive is active - hRS->huart->RxState != HAL_UART_STATE_BUSY_RX) // also check that receive "REALLY" isnt busy - RS_UART_RxCpltCallback(hRS); - - /* TX Callback */ - if (( hRS->huart->TxXferCount == 0U) && RS_Is_TX_Busy(hRS) && // if all bytes are transmited and transmit is active - hRS->huart->gState != HAL_UART_STATE_BUSY_TX) // also check that receive "REALLY" isnt busy - RS_UART_TxCpltCallback(hRS); - } - //----------------ERRORS HANDLER---------------- - else - { - /* de-init uart transfer */ - RS_Abort(hRS, ABORT_RS); - RS_Handle_Receive_Start(hRS, hRS->pMessagePtr); - - // later, maybe, will be added specific handlers for err - } -} - - -/** - * @brief Handler for TIM. - * @param hRS - указатель на хендлер RS. - * @note Попадание сюда = таймаут и перезапуск RS приема - * Добавить вызов этой функции в TIMx_IRQHandler(). - */ -void RS_TIM_Handler(RS_HandleTypeDef *hRS) -{ - HAL_TIM_IRQHandler(hRS->htim); - HAL_TIM_Base_Stop_IT(hRS->htim); - RS_Abort(hRS, ABORT_RS); - - RS_Handle_Receive_Start(hRS, hRS->pMessagePtr); -} -//--------------------CALLBACK/HANDLER FUNCTIONS--------------------- -//------------------------------------------------------------------- - - - -//------------------------------------------------------------------- -//--------------WEAK PROTOTYPES FOR PROCESSING MESSAGE--------------- -///** -// * @brief Respond accord to received message. -// * @param hRS - указатель на хендлер RS. -// * @param RS_msg - указатель на структуру сообщения. -// * @return RS_RES - статус о результате ответа на комманду. -// * @note Обработка принятой комманды и ответ на неё. -// */ -//__weak RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg) -//{ -// /* Redefine function for user purposes */ -// return RS_ERR; -//} -// -///** -// * @brief Collect message in buffer to transmit it. -// * @param hRS - указатель на хендлер RS. -// * @param RS_msg - указатель на структуру сообщения. -// * @param msg_uart_buff - указатель на буффер UART. -// * @return RS_RES - статус о результате заполнения буфера. -// * @note Заполнение буффера UART из структуры сообщения. -// */ -//__weak RS_StatusTypeDef Collect_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff) -//{ -// /* Redefine function for user purposes */ -// return RS_ERR; -//} -// -///** -// * @brief Parse message from buffer to process it. -// * @param hRS - указатель на хендлер RS. -// * @param RS_msg - указатель на структуру сообщения. -// * @param msg_uart_buff - указатель на буффер UART. -// * @return RS_RES - статус о результате заполнения структуры. -// * @note Заполнение структуры сообщения из буффера UART. -// */ -//__weak RS_StatusTypeDef Parse_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff) -//{ -// /* Redefine function for user purposes */ -// return RS_ERR; -//} -// -///** -// * @brief Define size of RX Message that need to be received. -// * @param hRS - указатель на хендлер RS. -// * @param rx_data_size - указатель на переменную для записи кол-ва байт для принятия. -// * @return RS_RES - статус о корректности рассчета кол-ва байт для принятия. -// * @note Определение сколько байтов надо принять по протоколу. -// */ -//__weak RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hRS, uint32_t *rx_data_size) -//{ -// /* Redefine function for user purposes */ -// return RS_ERR; -//} -//--------------WEAK PROTOTYPES FOR PROCESSING MESSAGE--------------- -//------------------------------------------------------------------- diff --git a/Code/Modbus/rs_message.h b/Code/Modbus/rs_message.h deleted file mode 100644 index 1440066..0000000 --- a/Code/Modbus/rs_message.h +++ /dev/null @@ -1,297 +0,0 @@ -/**********************************RS*************************************** -Данный файл содержит объявления базовых функции и дефайны для реализации -протоколов по RS/UART. -***************************************************************************/ -#ifndef __RS_LIB_H_ -#define __RS_LIB_H_ - -#include "modbus.h" - -#include "periph_general.h" -#include "crc_algs.h" - - -///////////////////////////////////////////////////////////////////// -////////////////////////////---DEFINES---//////////////////////////// -/* Check that all defines required by RS are defined */ -#ifndef MSG_SIZE_MAX -#error Define MSG_SIZE_MAX (Maximum size of message). This is necessary to create buffer for UART. -#endif - -#ifndef RX_FIRST_PART_SIZE -#error Define RX_FIRST_PART_SIZE (Size of first part of message). This is necessary to receive the first part of the message, from which determine the size of the remaining part of the message. -#endif - - -/* Clear message-uart buffer */ -#define RS_Clear_Buff(_buff_) for(int i=0; ifRS_Busy = 0 -#define RS_Set_Busy(_hRS_) _hRS_->fRS_Busy = 1 - -#define RS_Set_RX_Flags(_hRS_) _hRS_->fRX_Busy = 1; _hRS_->fRX_Done = 0; _hRS_->fRX_Half = 0 -#define RS_Set_TX_Flags(_hRS_) _hRS_->fTX_Busy = 1; _hRS_->fTX_Done = 0 - -#define RS_Reset_RX_Flags(_hRS_) _hRS_->fRX_Busy = 0; _hRS_->fRX_Done = 0; _hRS_->fRX_Half = 0 -#define RS_Reset_TX_Flags(_hRS_) _hRS_->fTX_Busy = 0; _hRS_->fTX_Done = 0 - -#define RS_Set_RX_End_Flag(_hRS_) _hRS_->fRX_Done = 1 -#define RS_Set_TX_End_Flag(_hRS_) _hRS_->fTX_Done = 1 - -#define RS_Set_RX_End(_hRS_) RS_Reset_RX_Flags(_hRS_); RS_Set_RX_End_Flag(_hRS_) -#define RS_Set_TX_End(_hRS_) RS_Reset_TX_Flags(_hRS_); RS_Set_TX_End_Flag(_hRS_) - -/* Clear all RS stuff */ -#define RS_Clear_All(_hRS_) RS_Clear_Buff(_hRS_->pBufferPtr); RS_Reset_RX_Flags(_hRS_); RS_Reset_TX_Flags(_hRS_); - -//#define MB_Is_RX_Busy(_hRS_) ((_hRS_->huart->gState&HAL_USART_STATE_BUSY_RX) == HAL_USART_STATE_BUSY_RX) -//#define MB_Is_TX_Busy(_hRS_) ((_hRS_->huart->gState&HAL_USART_STATE_BUSY_RX) == HAL_USART_STATE_BUSY_TX) -#define RS_Is_RX_Busy(_hRS_) (_hRS_->fRX_Busy == 1) -#define RS_Is_TX_Busy(_hRS_) (_hRS_->fTX_Busy == 1) -////////////////////////////---DEFINES---//////////////////////////// - - - -///////////////////////////////////////////////////////////////////// -///////////////////////---STRUCTURES & ENUMS---////////////////////// -//------------------ENUMERATIONS-------------------- -/* Enums for respond CMD about RS status*/ -typedef enum // RS_StatusTypeDef -{ - /* IN-CODE STATUS (start from 0x01, and goes up)*/ - /*0x01*/ RS_OK = 0x01, - /*0x02*/ RS_ERR, - /*0x03*/ RS_ABORTED, - /*0x04*/ RS_BUSY, - /*0x05*/ RS_SKIP, - - /*0x06*/ RS_COLLECT_MSG_ERR, - /*0x07*/ RS_PARSE_MSG_ERR, - - // reserved values -// /*0x00*/ RS_UNKNOWN_ERR = 0x00, // reserved for case, if no one error founded (nothing changed response from zero) -}RS_StatusTypeDef; - - -/* Enums for RS Modes */ -typedef enum // RS_ModeTypeDef -{ - SLAVE_ALWAYS_WAIT = 0x01, // Slave mode with infinity waiting - SLAVE_TIMEOUT_WAIT = 0x02, // Slave mode with waiting with timeout -// MASTER = 0x03, // Master mode -}RS_ModeTypeDef; - -/* Enums for RS UART Modes */ -typedef enum // RS_ITModeTypeDef -{ - BLCK_MODE = 0x00, // Blocking mode - IT_MODE = 0x01, // Interrupt mode -}RS_ITModeTypeDef; - -/* Enums for Abort modes */ -typedef enum // RS_AbortTypeDef -{ - ABORT_TX = 0x01, // Abort transmit - ABORT_RX = 0x02, // Abort receive - ABORT_RX_TX = 0x03, // Abort receive and transmit - ABORT_RS = 0x04, // Abort uart and reset RS structure -}RS_AbortTypeDef; - -/* Enums for RX Size modes */ -typedef enum // RS_RXSizeTypeDef -{ - RS_RX_Size_Const = 0x01, // size of receiving message is constant - RS_RX_Size_NotConst = 0x02, // size of receiving message isnt constant -}RS_RXSizeTypeDef; - - -//-----------STRUCTURE FOR HANDLE RS------------ -/** - * @brief Handle for RS communication. - * @note Prefixes: h - handle, s - settings, f - flag - */ -typedef struct // RS_HandleTypeDef -{ - /* MESSAGE */ - uint8_t ID; // ID of RS "channel" - RS_MsgTypeDef *pMessagePtr; // pointer to message struct - uint8_t *pBufferPtr; // pointer to message buffer - uint32_t RS_Message_Size; // size of whole message, not only data - - /* HANDLERS and SETTINGS */ - UART_HandleTypeDef *huart; // handler for used uart - TIM_HandleTypeDef *htim; // handler for used tim - RS_ModeTypeDef sRS_Mode; // setting: slave or master @ref RS_ModeTypeDef - RS_ITModeTypeDef sRS_IT_Mode; // setting: 1 - IT mode, 0 - Blocking mode - uint16_t sRS_Timeout; // setting: timeout in ms - RS_RXSizeTypeDef sRS_RX_Size_Mode; // setting: 1 - not const, 0 - const - - /* FLAGS */ - // These flags for controling receive/transmit - unsigned fRX_Half:1; // flag: 0 - receiving msg before ByteCnt, 0 - receiving msg after ByteCnt - - unsigned fRS_Busy:1; // flag: 1 - RS is busy, 0 - RS isnt busy - unsigned fRX_Busy:1; // flag: 1 - receiving is active, 0 - receiving isnt active - unsigned fTX_Busy:1; // flag: 1 - transmiting is active, 0 - transmiting isnt active - - unsigned fRX_Done:1; // flag: 1 - receiving is done, 0 - receiving isnt done - unsigned fTX_Done:1; // flag: 1 - transmiting is done, 0 - transmiting isnt done - - // setted by user - unsigned fMessageHandled:1; // flag: 1 - RS command is handled, 0 - RS command isnt handled yet - unsigned fEchoResponse:1; // flag: 1 - response with received msg, 0 - response with own msg - unsigned fDeferredResponse:1; // flag: 1 - response not in interrupt, 0 - response in interrupt - unsigned fReInit_UART:1; // flag: 1 - need to reinitialize uart, 0 - nothing - - /* RS STATUS */ - RS_StatusTypeDef RS_STATUS; // RS status -}RS_HandleTypeDef; - - -///////////////////////---STRUCTURES & ENUMS---////////////////////// - - -///////////////////////////////////////////////////////////////////// -///////////////////////////---FUNCTIONS---/////////////////////////// -//----------------FUNCTIONS FOR PROCESSING MESSAGE------------------- -/*--------------------Defined by users purposes--------------------*/ -/** - * @brief Respond accord to received message. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о результате ответа на комманду. - * @note Обработка принятой комманды и ответ на неё. - */ -RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg); - -/** - * @brief Collect message in buffer to transmit it. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @param msg_uart_buff - указатель на буффер UART. - * @return RS_RES - статус о результате заполнения буфера. - * @note Заполнение буффера UART из структуры сообщения. - */ -RS_StatusTypeDef Collect_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff); - -/** - * @brief Parse message from buffer to process it. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @param msg_uart_buff - указатель на буффер UART. - * @return RS_RES - статус о результате заполнения структуры. - * @note Заполнение структуры сообщения из буффера UART. - */ -RS_StatusTypeDef Parse_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff); - -/** - * @brief Define size of RX Message that need to be received. - * @param hRS - указатель на хендлер RS. - * @param rx_data_size - указатель на переменную для записи кол-ва байт для принятия. - * @return RS_RES - статус о корректности рассчета кол-ва байт для принятия. - * @note Определение сколько байтов надо принять по протоколу. - */ -RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hRS, uint32_t *rx_data_size); - - -//-------------------------GENERAL FUNCTIONS------------------------- -/*-----------------Should be called from main code-----------------*/ -/** - * @brief Start receive IT. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации приема. - */ -RS_StatusTypeDef RS_Receive_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg); - -/** - * @brief Start transmit IT. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации передачи. - */ -RS_StatusTypeDef RS_Transmit_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg); - -/** - * @brief Initialize UART and handle RS stucture. - * @param hRS - указатель на хендлер RS. - * @param suart - указатель на структуру с настройками UART. - * @param stim - указатель на структуру с настройками таймера. - * @param pRS_BufferPtr - указатель на буффер для приема-передачи по UART. Если он NULL, то поставиться библиотечный буфер. - * @return RS_RES - статус о состоянии RS после инициализации. - */ -RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart, TIM_SettingsTypeDef *stim, uint8_t *pRS_BufferPtr); -/** - * @brief ReInitialize UART and RS receive. - * @param hRS - указатель на хендлер RS. - * @param suart - указатель на структуру с настройками UART. - * @return RS_RES - статус о состоянии RS после инициализации. - */ -HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart); -/** - * @brief Abort RS/UART. - * @param hRS - указатель на хендлер RS. - * @param AbortMode - выбор, что надо отменить. - - ABORT_TX: Отмена передачи по ЮАРТ, с очищением флагов TX, - - ABORT_RX: Отмена приема по ЮАРТ, с очищением флагов RX, - - ABORT_RX_TX: Отмена приема и передачи по ЮАРТ, - - ABORT_RS: Отмена приема-передачи RS, с очищением всей структуры. - * @return RS_RES - статус о состоянии RS после аборта. - * @note Отмена работы UART в целом или отмена приема/передачи RS. - Также очищается хендл hRS. - */ -RS_StatusTypeDef RS_Abort(RS_HandleTypeDef *hRS, RS_AbortTypeDef AbortMode); -//-------------------------GENERAL FUNCTIONS------------------------- - - -//------------------------------------------------------------------- -//--------------------CALLBACK/HANDLER FUNCTIONS--------------------- -/** - * @brief Handle for starting receive. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации приема или окончания общения. - * @note Определяет начинать прием команды/ответа или нет. - */ -RS_StatusTypeDef RS_Handle_Receive_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg); -/** - * @brief Handle for starting transmit. - * @param hRS - указатель на хендлер RS. - * @param RS_msg - указатель на структуру сообщения. - * @return RS_RES - статус о состоянии RS после инициализации передачи. - * @note Определяет отвечать ли на команду или нет. - */ -RS_StatusTypeDef RS_Handle_Transmit_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg); -/** - * @brief UART RX Callback: define behaviour after receiving parts of message. - * @param hRS - указатель на хендлер RS. - * @return RS_RES - статус о состоянии RS после обработки приема. - * @note Контролирует прием сообщения: определяет размер принимаемой посылки и обрабатывает его. - */ -RS_StatusTypeDef RS_UART_RxCpltCallback(RS_HandleTypeDef *hRS); -/** - * @brief UART TX Callback: define behaviour after transmiting message. - * @param hRS - указатель на хендлер RS. - * @return RS_RES - статус о состоянии RS после обработки приема. - * @note Определяет поведение RS после передачи сообщения. - */ -RS_StatusTypeDef RS_UART_TxCpltCallback(RS_HandleTypeDef *hRS); -/** - * @brief Handler for UART. - * @param hRS - указатель на хендлер RS. - * @note Обрабатывает ошибки если есть и вызывает RS Коллбеки. - * Добавить вызов этой функции в UARTx_IRQHandler(). - */ -void RS_UART_Handler(RS_HandleTypeDef *hRS); -/** - * @brief Handler for TIM. - * @param hRS - указатель на хендлер RS. - * @note Попадание сюда = таймаут и перезапуск RS приема - * Добавить вызов этой функции в TIMx_IRQHandler(). - */ -void RS_TIM_Handler(RS_HandleTypeDef *hRS); -//--------------------CALLBACK/HANDLER FUNCTIONS--------------------- -///////////////////////////---FUNCTIONS---/////////////////////////// - -#endif // __RS_LIB_H_ \ No newline at end of file diff --git a/Code/PWM/control.c b/Code/PWM/control.c deleted file mode 100644 index c907d0f..0000000 --- a/Code/PWM/control.c +++ /dev/null @@ -1,240 +0,0 @@ -#include "pwm.h" - - -TIM_SettingsTypeDef TIM_CTRL = {0}; - -// variables for filling arrays -int Numb_Of_Peroids = 2; // number of periods -int Samples_Per_Peroid = 0; // how many samples in one period -int Size_Of_Log = 0; // size of written data to log -int log_ind = 0; // index of log arrays -int cnt_to_cnt_log = 0; // counter for log_cnt - -int sine_ind_prev = 0; - -/** - * @brief Filling logs. - * @note Заполнение логов: синус, шим, пила. - * @note This called from TIM_CTRL_Handler - */ -void Fill_Logs_with_Data(void) -{ - // calc pwm duty from timer - float PWM_Duty; - if(PWM_Get_Mode(&hpwm1, PWM_DC_MODE) == 0) // if sinus need to be written - { - if(PWM_Get_Mode(&hpwm1, PWM_CH_MODE)) // if its signed sine mode (two channels) - { - if(hpwm1.Duty_Table_Ind < hpwm1.Duty_Table_Size/2) // first half get from channel 1 - PWM_Duty = (((float)PWM_Get_Compare1(&hpwm1))/(PWM_Get_Autoreload(&hpwm1)))+1; - else // second half get from channel 2 - PWM_Duty = 1-(((float)PWM_Get_Compare2(&hpwm1))/(PWM_Get_Autoreload(&hpwm1))); - } - else // if its unsigned sine mode (single channel) - { // just get current pwm duty - PWM_Duty = ((float)PWM_Get_Compare1(&hpwm1)/PWM_Get_Autoreload(&hpwm1)); - } - } - else // if its dc pwm mode - { // just get current pwm duty - if(PWM_Get_Mode(&hpwm1, PWM_CH_MODE)) // if its second channels mode - PWM_Duty = ((float)PWM_Get_Compare2(&hpwm1)/PWM_Get_Autoreload(&hpwm1)); - else // if its first channel mode - PWM_Duty = ((float)PWM_Get_Compare1(&hpwm1)/PWM_Get_Autoreload(&hpwm1)); - } - - - - // WRITE SINUS TO WHOLE ARRAY -// sine_log[log_ind] = sin_val; - if(PWM_Get_Mode(&hpwm1,PWM_DC_MODE) == 0) // in table mode write PWM Duty (write sine) with scale 1/2 from sin table max value (0xFFFF/2) - sine_log[log_ind] = PWM_Duty*(0x8000-1); - else // in dc mode write PWM Duty (write sine) - sine_log[log_ind] = 0; - - - - // WRITE PWM - if(PWM_Get_Mode(&hpwm1,PWM_DC_MODE)) // in DC mode - { - // write 1 - if log_ind < Size_Of_Period*PWM_Dury - // write 0 - otherwise - pwm_log[log_ind] = (log_ind%(Size_Of_Log/Numb_Of_Peroids) < (Size_Of_Log/Numb_Of_Peroids+1)*hpwm1.PWM_Value/100)? 1: 0; - } - else // in table mode - { - // write fill whole pwm array at one interrupt - int PWM_Period_End_Ind = (Size_Of_Log/Numb_Of_Peroids); - int PWM_Step_End_Ind; - if(PWM_Get_Mode(&hpwm1,PWM_CH_MODE)) - PWM_Step_End_Ind = PWM_Period_End_Ind*fabs(PWM_Duty-1); - else - PWM_Step_End_Ind = PWM_Period_End_Ind*PWM_Duty; - for(int i = 0; i <= PWM_Step_End_Ind; i++) - { - for (int j = 0; j < Numb_Of_Peroids; j++) - pwm_log[i+j*PWM_Period_End_Ind] = 1; - } - for(int i = PWM_Step_End_Ind+1; i < PWM_Period_End_Ind; i++) - for (int j = 0; j < Numb_Of_Peroids; j++) - pwm_log[i+j*PWM_Period_End_Ind] = 0; - } - - // WRITE COUNTER - cnt_log[log_ind] = cnt_to_cnt_log; - cnt_to_cnt_log++; - if(cnt_to_cnt_log>=Size_Of_Log/2) - cnt_to_cnt_log = 0; - - // INCREMENT AND RESET COUNTER - log_ind++; - if(PWM_Get_Mode(&hpwm1,PWM_DC_MODE) == 0) // if its PWM table mode - { - // SYNCHRONIZE PERIOD OF SIN IN LOG - // (это надо, чтобы данные не съезжали из-за несинхронизированного периода) - - // wait until period ended - if(log_ind>Size_Of_Log-1) // if logs are filled - { - if((unsigned)hpwm1.Duty_Table_Ind < sine_ind_prev) // and if new period started - { - log_ind = 0; // reset counter - sine_ind_prev = (unsigned)hpwm1.Duty_Table_Ind; - } - } - // update prev variable only if log currently writing - else - sine_ind_prev = (unsigned)hpwm1.Duty_Table_Ind; - } - else // if its PWM DC mode - { - // if logs are filled - if(log_ind>Size_Of_Log-1) - log_ind = 0; - } - - - // if its overflow log array size - reset log_ind - if(log_ind>LOG_SIZE-1) - { - log_ind = 0; - sine_ind_prev = (unsigned)hpwm1.Duty_Table_Ind; - } -} - -/** - * @brief Update log parameters. - * @note Проверка надо ли обновлять параметры логов, и если надо - обновляет их. - * @note This called from TIM_CTRL_Handler - */ -void Update_Params_For_Log(void) -{ - unsigned UpdateLog = 0; - - // READ NUMB OF PERIOD IN LOGS - if(Numb_Of_Peroids != log_ctrl[R_LOG_CTRL_LOG_PWM_NUMB]) - { - Numb_Of_Peroids = log_ctrl[R_LOG_CTRL_LOG_PWM_NUMB]; - // update logs params - UpdateLog = 1; - } - // READ SIZE OF LOGS - if(Size_Of_Log != log_ctrl[R_LOG_CTRL_LOG_SIZE]) - { - Size_Of_Log = log_ctrl[R_LOG_CTRL_LOG_SIZE]; - // update logs params - UpdateLog = 1; - } - - // UPDATE LOG PARAMS - if(UpdateLog) - { - // set logs params - Set_Log_Params(); - } -} - -/** - * @brief Set up log parameters. - * @note Устанавливает настройки логов и проверяет их на корректность. - */ -void Set_Log_Params(void) -{ - // SET LOG PARAMS - log_ind = 0; - Samples_Per_Peroid = TIM_CTRL.sTimFreqHz/hpwm1.PWM_Value; - - if(Size_Of_Log > LOG_SIZE) // if its too much data in log - { - Numb_Of_Peroids = (LOG_SIZE/Samples_Per_Peroid); - log_ctrl[R_LOG_CTRL_LOG_SIZE] = Numb_Of_Peroids; - Size_Of_Log = Numb_Of_Peroids*Samples_Per_Peroid; - } - - // clear logs arrays - for(int i = Size_Of_Log; i < LOG_SIZE; i++) - { - sine_log[i] = 0; - pwm_log[i] = 0; - cnt_log[i] = 0; - } - -} - -/** - * @brief reInitialization of control timer. - * @note Перенастраивает таймер согласно принятным настройкам в log_ctrl. - * @note This called from main while - */ -void Control_Timer_ReInit(TIM_SettingsTypeDef *stim) -{ - TIM_Base_MspDeInit(&stim->htim); - hpwm1.stim.sTickBaseMHz = PROJSET.TIM_CTRL_TICKBASE; - TIM_Base_Init(stim); - - HAL_TIM_Base_Start_IT(&stim->htim); // timer for sinus - HAL_NVIC_SetPriority(TIM8_BRK_TIM12_IRQn, 1, 1); -} -/** - * @brief First initialization of Control Timer. - * @note Первый управляющего таймера. Таймер записывает логи и обновляет параметры ШИМ. - * @note This called from main - */ -void Control_Timer_FirstInit(void) -{ - //-------CONTROL TIMER INIT---------- - // tim settings - TIM_CTRL.htim.Instance = TIM12; - TIM_CTRL.sTimMode = TIM_IT_MODE; - TIM_CTRL.sTickBaseMHz = PROJSET.TIM_CTRL_TICKBASE; - TIM_CTRL.sTimAHBFreqMHz = PROJSET.TIM_CTRL_AHB_FREQ; - TIM_CTRL.sTimFreqHz = HZ_TIMER_CTRL; - - TIM_Base_Init(&TIM_CTRL); - HAL_NVIC_SetPriority(TIM8_BRK_TIM12_IRQn, 1, 1); - - HAL_TIM_Base_Start_IT(&TIM_CTRL.htim); // timer for sinus - - - // FILL TIME ARRAY WITH TIME - for(int i = 0; i <= R_TIME_LOG_QNT; i++) - time_log[i] = i; - -} - -//------------------------------------------------------------------- -//------------------------HANDLERS FUNCTIONS------------------------- -//-------------CONTROL TIMER--------------- -void TIM8_BRK_TIM12_IRQHandler(void) -{ - Trace_CTRL_TIM_Enter(); - HAL_TIM_IRQHandler(&TIM_CTRL.htim); - - Fill_Logs_with_Data(); - Update_Params_For_Log(); - Update_Params_For_PWM(&hpwm1); - - WriteSettingsToMem(); - - Trace_CTRL_TIM_Exit(); -} \ No newline at end of file diff --git a/Code/PWM/control.h b/Code/PWM/control.h deleted file mode 100644 index d42e12e..0000000 --- a/Code/PWM/control.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __CONTROL_H_ -#define __CONTROL_H_ - -#include "periph_general.h" -#include "modbus.h" -#include "math.h" -#include "settings.h" - -#define M_PI 3.14159265358979323846 /* pi */ - -extern TIM_SettingsTypeDef TIM_CTRL; - -//---------------------this called from TIM_CTRL_Handler()----------------------- -/** - * @brief Update log parameters. - * @note Проверка надо ли обновлять параметры логов, и если надо - обновляет их. - * @note This called from TIM_CTRL_Handler - */ -void Update_Params_For_Log(void); -/** - * @brief Filling logs. - * @note заполнение логов: синус, шим, пила. - * @note this called from TIM_CTRL_Handler - */ -void Fill_Logs_with_Data(void); -/** - * @brief Set up log parameters. - * @note Устанавливает настройки логов и проверяет их на корректность. - */ -void Set_Log_Params(void); - -/** - * @brief First initialization of Control Timer. - * @note Первый управляющего таймера. Таймер записывает логи и обновляет параметры ШИМ. - * @note This called from main - */ -void Control_Timer_FirstInit(void); - -// this called from main while(1) -/** - * @brief reInitialization of control timer. - * @param stim - указатель на настройки таймера. - * @note Перенастраивает таймер согласно принятным настройкам в log_ctrl. - * @note This called from main while - */ -void Control_Timer_ReInit(TIM_SettingsTypeDef *stim); - -#endif // __CONTROL_H_ \ No newline at end of file diff --git a/Code/PWM/pwm.c b/Code/PWM/pwm.c deleted file mode 100644 index 8ced758..0000000 --- a/Code/PWM/pwm.c +++ /dev/null @@ -1,855 +0,0 @@ -#include "pwm.h" -//#include "rng.h" - -PWM_HandleTypeDef hpwm1; -PWM_SlaveHandleTypeDef hpwm2; -PWM_SlaveHandleTypeDef hpwm3; - -uint32_t sin_table[SIN_TABLE_SIZE_MAX]; -unsigned ActiveChannelSHDW_Master; -float DeadTimeCnt_Master; - -unsigned ActiveChannelSHDW_Slave2; -float DeadTimeCnt_Slave2; - -unsigned ActiveChannelSHDW_Slave3; -float DeadTimeCnt_Slave3; -/** - * @brief First set up of PWM. - * @note Первый инит ШИМ. Заполняет структуры и инициализирует таймер для генерации синуоидального ШИМ. - * Скважность ШИМ меняется по закону синусоиды, каждый канал генерирует свой полупериод синуса (от -1 до 0 И от 0 до 1) - * ШИМ генерируется на одном канале. - * @note This called from main - */ -void PWM_Sine_FirstInit(void) -{ - hpwm1.pDuty_Table_Origin = SIN_TABLE_ORIGIN; - - //---------PWM TIMER1 INIT------------ - // channels settings - hpwm1.sConfigOC.OCMode = TIM_OCMODE_PWM1; - hpwm1.sConfigOC.Pulse = 0; - hpwm1.sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; - hpwm1.sConfigOC.OCFastMode = TIM_OCFAST_DISABLE; - - // tim1 settings - hpwm1.stim.htim.Instance = TIMER_PWM1_INSTANCE; - hpwm1.stim.sTimMode = TIM_IT_MODE; - hpwm1.stim.sTimFreqHz = HZ_TIMER_PWM; - hpwm1.stim.sTickBaseMHz = PROJSET.TIM_PWM_TICKBASE; - hpwm1.stim.sTimAHBFreqMHz = PROJSET.TIM_PWM_AHB_FREQ; - hpwm1.GPIOx = TIMER_PWM1_GPIOx; - hpwm1.GPIO_PIN_X1 = PROJSET.TIM_PWM1_GPIO_PIN_X1; - hpwm1.GPIO_PIN_X2 = PROJSET.TIM_PWM1_GPIO_PIN_X2; - hpwm1.PWM_Channel1 = PROJSET.TIM_PWM1_TIM_CHANNEL1; - hpwm1.PWM_Channel2 = PROJSET.TIM_PWM1_TIM_CHANNEL2; - hpwm1.hpwm2 = (void *)&hpwm2; - hpwm1.hpwm3 = (void *)&hpwm3; - - TIM_Base_Init(&hpwm1.stim); - TIM_Output_PWM_Init(&hpwm1.stim.htim, &hpwm1.sConfigOC, hpwm1.PWM_Channel1, hpwm1.GPIOx, hpwm1.GPIO_PIN_X1); - TIM_Output_PWM_Init(&hpwm1.stim.htim, &hpwm1.sConfigOC, hpwm1.PWM_Channel2, hpwm1.GPIOx, hpwm1.GPIO_PIN_X2); - - - // PWM SLAVES INIT - hpwm2.hMasterPWM = &hpwm1; - hpwm2.stim = hpwm1.stim; - hpwm2.stim.htim.Instance = (TIM_TypeDef *)PROJSET.TIM_PWM2_INSTANCE; - hpwm2.GPIOx = (GPIO_TypeDef *)PROJSET.TIM_PWM2_GPIOx; - hpwm2.GPIO_PIN_X1 = PROJSET.TIM_PWM2_GPIO_PIN_X1; - hpwm2.GPIO_PIN_X2 = PROJSET.TIM_PWM2_GPIO_PIN_X2; - hpwm2.PWM_Channel1 = PROJSET.TIM_PWM2_TIM_CHANNEL1; - hpwm2.PWM_Channel2 = PROJSET.TIM_PWM2_TIM_CHANNEL2; - hpwm2.Duty_Shift_Ratio = (float)2/3; - - hpwm3.hMasterPWM = &hpwm1; - hpwm3.stim = hpwm1.stim; - hpwm3.stim.htim.Instance = (TIM_TypeDef *)PROJSET.TIM_PWM3_INSTANCE; - hpwm3.GPIOx = (GPIO_TypeDef *)PROJSET.TIM_PWM3_GPIOx; - hpwm3.GPIO_PIN_X1 = PROJSET.TIM_PWM3_GPIO_PIN_X1; - hpwm3.GPIO_PIN_X2 = PROJSET.TIM_PWM3_GPIO_PIN_X2; - hpwm3.PWM_Channel1 = PROJSET.TIM_PWM3_TIM_CHANNEL1; - hpwm3.PWM_Channel2 = PROJSET.TIM_PWM3_TIM_CHANNEL2; - hpwm3.Duty_Shift_Ratio = (float)-2/3; - - PWM_SlavePhase_Init(&hpwm2); - PWM_SlavePhase_Init(&hpwm3); - - //----------TIMERS START------------- - HAL_TIM_Base_Start_IT(&hpwm1.stim.htim); // timer for PWM - HAL_TIM_PWM_Start(&hpwm1.stim.htim, hpwm1.PWM_Channel1); // PWM channel 1 - HAL_TIM_PWM_Start(&hpwm1.stim.htim, hpwm1.PWM_Channel2); // PWM channel 2 -} - - -/** - * @brief PWM Handler. - * @param hpwm - указатель на хендл ШИМ. - * @note Управляет скважностью ШИМ. - * @note This called from TIM_PWM_Handler - */ -void PWM_Handler(PWM_HandleTypeDef *hpwm) -{ - //------------SINUS MODE------------- - if(PWM_Get_Mode(&hpwm1,PWM_DC_MODE) == 0) - { - if(hpwm->PWM_Value != 0) // if there some frequency - { - unsigned sin_ind = PWM_Get_Duty_Table_Ind(hpwm, hpwm->stim.sTimFreqHz); - // overflow check - if(sin_ind >= hpwm->Duty_Table_Size) - sin_ind -= hpwm->Duty_Table_Size; - if(sin_ind >= hpwm->Duty_Table_Size) // if its still overflow reset it - sin_ind = 0; - - // if unsigned sine enabled - if(PWM_Get_Mode(hpwm, PWM_CH_MODE) == 0) - { - // set pwm duty - PWM_Set_Duty_From_Table(hpwm, sin_ind); // set first channel - PWM_SlavePhase_Set_DutyTable_Unsigned(PWM_Set_pSlaveHandle(hpwm,hpwm2), sin_ind); - PWM_SlavePhase_Set_DutyTable_Unsigned(PWM_Set_pSlaveHandle(hpwm,hpwm3), sin_ind); - } - // if signed sine enabled - else - { - int Duty = PWM_Get_Table_Element_Signed(hpwm, sin_ind); - - if(Duty >= 0) - { - PWM_Set_Compare1(hpwm, Duty); // set first channel - PWM_Set_Compare2(hpwm, 0); // reset second channel - } - else // если это вторая полуволна - { - PWM_Set_Compare1(hpwm, 0); // reset first channel - PWM_Set_Compare2(hpwm, -Duty); // set second channel - } - - PWM_SlavePhase_Set_DutyTable_Signed(PWM_Set_pSlaveHandle(hpwm,hpwm2), sin_ind); - PWM_SlavePhase_Set_DutyTable_Signed(PWM_Set_pSlaveHandle(hpwm,hpwm3), sin_ind); - } - } - else // if freq = 0 reset all channels - { - PWM_Set_Compare1(hpwm, 0); // reset first channel - PWM_Set_Compare2(hpwm, 0); // reset second channel - PWM_Set_Compare1(PWM_Set_pSlaveHandle(hpwm,hpwm2), 0); // reset first channel - PWM_Set_Compare2(PWM_Set_pSlaveHandle(hpwm,hpwm2), 0); // reset second channel - PWM_Set_Compare1(PWM_Set_pSlaveHandle(hpwm,hpwm3), 0); // reset first channel - PWM_Set_Compare2(PWM_Set_pSlaveHandle(hpwm,hpwm3), 0); // reset second channel - } - - } - //-----------PWM DC MODE------------- - else - { - PWM_Set_Compare1(PWM_Set_pSlaveHandle(hpwm,hpwm2), 0); // reset first channel - PWM_Set_Compare2(PWM_Set_pSlaveHandle(hpwm,hpwm2), 0); // reset second channel - PWM_Set_Compare1(PWM_Set_pSlaveHandle(hpwm,hpwm3), 0); // reset first channel - PWM_Set_Compare2(PWM_Set_pSlaveHandle(hpwm,hpwm3), 0); // reset second channel -// uint32_t pwm_rng = 0; -// HAL_RNG_GenerateRandomNumber(&hrng, &pwm_rng); -// pwm_rng = ((pwm_rng&0xFFFF)/(0xFFFF/PWM_Get_Autoreload(hpwm)))/((float)100/hpwm->PWM_Value); -// if (pwm_rng < PWM_Calc_Min_Duty(hpwm)) -// pwm_rng = PWM_Calc_Min_Duty(hpwm); - // if second channel enabled - if(PWM_Get_Mode(hpwm, PWM_CH_MODE)) - { - PWM_Set_Compare1(hpwm, 0); // reset first channel - PWM_Set_Duty_From_Percent(hpwm, hpwm->PWM_Channel2); // set second channel -// __HAL_TIM_SET_COMPARE(&(hpwm->stim.htim), TIM_CHANNEL_2, pwm_rng); // set second channel - } - // if first channel enabled - else - { -// __HAL_TIM_SET_COMPARE(&(hpwm->stim.htim), TIM_CHANNEL_1, pwm_rng); // set second channel - PWM_Set_Duty_From_Percent(hpwm, hpwm->PWM_Channel1); // set first channel - PWM_Set_Compare2(hpwm, 0); // reset second channel - } - } - - //-----CHECK CHANNELS FOR ERRORS----- - uint16_t min_duty = PWM_Calc_Min_Duty(hpwm); - // IF FIRST CHANNEL IS ACRIVE - if(PWM_Get_Compare1(hpwm) != 0) - { - // Duty shoud be bigger or equeal than min duration - if (PWM_Get_Compare1(hpwm)PWM_Get_Autoreload(hpwm)-min_duty) - PWM_Set_Compare1(hpwm, PWM_Get_Autoreload(hpwm)-min_duty); - } - // IF SECOND CHANNEL IS ACRIVE - else if(PWM_Get_Compare2(hpwm) != 0) - { - // Duty shoud be bigger or equeal than min duration - if (PWM_Get_Compare2(hpwm)PWM_Get_Autoreload(hpwm)-min_duty) - PWM_Set_Compare2(hpwm, PWM_Get_Autoreload(hpwm)-min_duty); - } - // IF BOTH CHANNEL IS ACRIVE - if((PWM_Get_Compare1(hpwm) != 0) && (PWM_Get_Compare2(hpwm) != 0)) - { - // Only one channel shoud be active so disable all - PWM_Set_Compare1(hpwm, 0); - PWM_Set_Compare2(hpwm, 0); - } - PWM_SlavePhase_Check_Channels(PWM_Set_pSlaveHandle(hpwm,hpwm2)); - PWM_SlavePhase_Check_Channels(PWM_Set_pSlaveHandle(hpwm,hpwm3)); - - if(hpwm->PWM_DeadTime) - { - PWM_CreateDeadTime(hpwm, &DeadTimeCnt_Master, &ActiveChannelSHDW_Master); - PWM_SlavePhase_CreateDeadTime(PWM_Set_pSlaveHandle(hpwm,hpwm2), &DeadTimeCnt_Slave2, &ActiveChannelSHDW_Slave2); - PWM_SlavePhase_CreateDeadTime(PWM_Set_pSlaveHandle(hpwm,hpwm3), &DeadTimeCnt_Slave3, &ActiveChannelSHDW_Slave3); - } - - -} - -/** - * @brief Update PWM parameters. - * @note Проверка надо ли обновлять параметры ШИМ, и если надо - обновляет их. - * @note This called from TIM_CTRL_Handler - */ -void Update_Params_For_PWM(PWM_HandleTypeDef *hpwm) -{ - unsigned UpdateModeParams = 0; - unsigned UpdateLog = 0; - - // READ PWM_DC_MODE - if(PWM_Get_Mode(hpwm, PWM_DC_MODE) != (MB_Read_Coil_Local(&coils_regs[0], COIL_PWM_DC_MODE) << PWM_DC_MODE_Pos)) - { - if(MB_Read_Coil_Local(&coils_regs[0], COIL_PWM_DC_MODE)) - { - hpwm->sPWM_Mode |= PWM_DC_MODE; - } - else - { - hpwm->sPWM_Mode &= ~PWM_DC_MODE; - } - // update mode params - UpdateModeParams = 1; - // update logs params - UpdateLog = 1; - } - - // READ PWM_CH_MODE - if(PWM_Get_Mode(hpwm, PWM_CH_MODE) != (MB_Read_Coil_Local(&coils_regs[0], COIL_PWM_CH_MODE) << PWM_CH_MODE_Pos)) - { - if(MB_Read_Coil_Local(&coils_regs[0], COIL_PWM_CH_MODE)) - { - hpwm->sPWM_Mode |= PWM_CH_MODE; - } - else - { - hpwm->sPWM_Mode &= ~PWM_CH_MODE; - } - // update mode params - UpdateModeParams = 1; - // update logs params - UpdateLog = 1; - } - - - // READ PWM_CH_MODE - if(PWM_Get_Mode(hpwm, PWM_PHASE_MODE) != (MB_Read_Coil_Local(&coils_regs[0], COIL_PWM_PHASE_MODE) << PWM_PHASE_MODE_Pos)) - { - if(MB_Read_Coil_Local(&coils_regs[0], COIL_PWM_PHASE_MODE)) - { - hpwm->sPWM_Mode |= PWM_PHASE_MODE; - } - else - { - hpwm->sPWM_Mode &= ~PWM_PHASE_MODE; - } - // update mode params - UpdateModeParams = 1; - // update logs params - UpdateLog = 1; - } - - - - // READ PWM_VALUE - if(hpwm->PWM_Value != int_to_percent(pwm_ctrl[R_PWM_CTRL_PWM_VALUE])) - { - hpwm->PWM_Value = int_to_percent(pwm_ctrl[R_PWM_CTRL_PWM_VALUE]); - // update logs params - UpdateLog = 1; - } - - // READ TABLE_SIZE - if(hpwm->Duty_Table_Size != pwm_ctrl[R_PWM_CTRL_SIN_TABLE_SIZE]) - { - hpwm->Duty_Table_Size = PWM_Fill_Sine_Table(&hpwm1, pwm_ctrl[R_PWM_CTRL_SIN_TABLE_SIZE]); - pwm_ctrl[R_PWM_CTRL_SIN_TABLE_SIZE] = hpwm->Duty_Table_Size; - } - - // READ MIN PULSE DURATION - if(hpwm->PWM_MinPulseDur != pwm_ctrl[R_PWM_CTRL_MIN_PULSE_DUR]) - { - hpwm->PWM_MinPulseDur = pwm_ctrl[R_PWM_CTRL_MIN_PULSE_DUR]; - // update mode params - UpdateModeParams = 1; - // update logs params - UpdateLog = 1; - } - - // READ DEAD TIME - if(hpwm->PWM_DeadTime != pwm_ctrl[R_PWM_CTRL_DEAD_TIME]) - { - hpwm->PWM_DeadTime = pwm_ctrl[R_PWM_CTRL_DEAD_TIME]; - } - - - - // UPDATE PWM PARAMS - if(UpdateModeParams) - { - // UPDATE DUTY TABLE SCALE - PWM_Update_DutyTableScale(hpwm); - - - // update logs params - UpdateLog = 1; - } - - // UPDATE LOG PARAMS - if(UpdateLog) - { - // set logs params - Set_Log_Params(); - } -} - - - -/** - * @brief reInitialization of PWM TIM. - * @param hpwm - указатель на хендл ШИМ. - * @note Перенастраивает таймер согласно принятным настройкам в pwm_ctrl - * ШИМ генерируется на одном канале. - */ -void PWM_Sine_ReInit(PWM_HandleTypeDef *hpwm) -{ - Trace_PWM_reInit_Enter(); - TIM_Base_MspDeInit(&hpwm->stim.htim); - hpwm1.stim.sTickBaseMHz = TIMER_PWM_TICKBASE; - TIM_Base_Init(&hpwm->stim); - TIM_Output_PWM_Init(&hpwm->stim.htim, &hpwm->sConfigOC, hpwm->PWM_Channel1, hpwm->GPIOx, hpwm->GPIO_PIN_X1); - TIM_Output_PWM_Init(&hpwm->stim.htim, &hpwm->sConfigOC, hpwm->PWM_Channel2, hpwm->GPIOx, hpwm->GPIO_PIN_X2); - - - - PWM_Update_DutyTableScale(hpwm); - - - //----------TIMERS START------------- - HAL_TIM_Base_Start_IT(&hpwm1.stim.htim); // timer for PWM - HAL_TIM_PWM_Start(&hpwm1.stim.htim, hpwm->PWM_Channel1); // PWM channel 1 - HAL_TIM_PWM_Start(&hpwm1.stim.htim, hpwm->PWM_Channel2); // PWM channel 2 - - Trace_PWM_reInit_Exit(); -} -/** - * @brief Getting ind for Duty Table. - * @param hpwm - указатель на хендл ШИМ. - * @param FreqTIM - частота таймера ШИМ. - * @note Рассчитывает индекс для таблицы скважностей. - * PWM_Value в hpwm - частота с которой эта таблица должна выводиться на ШИМ - * @note This called from TIM_PWM_Handler - */ -uint32_t PWM_Get_Duty_Table_Ind(PWM_HandleTypeDef *hpwm, float FreqTIM) -{ - float sine_ind_step; - uint32_t sine_ind; - // calc ind for sin table - sine_ind_step = hpwm->Duty_Table_Size/(FreqTIM/hpwm->PWM_Value); - hpwm->Duty_Table_Ind += sine_ind_step; - if(hpwm->Duty_Table_Ind >= hpwm->Duty_Table_Size) - hpwm->Duty_Table_Ind -= hpwm->Duty_Table_Size; - - // if its too big (e.g. inf) - if(hpwm->Duty_Table_Ind >= 0xFFFF) - hpwm->Duty_Table_Ind = 0; - - return hpwm->Duty_Table_Ind; - -} - - - -/** - * @brief Create Dead Time when switches channels. - * @param hpwm - указатель на хендл ШИМ. - */ -void PWM_CreateDeadTime(PWM_HandleTypeDef *hpwm, float *LocalDeadTimeCnt, unsigned *LocalActiveChannel) -{ - // get current active channel - hpwm->fActiveChannel = (PWM_Get_Compare2(hpwm) != 0); // if channel two is active - write 1, otherwise - 0 - // when channels are swithed and no dead time currently active - if(*LocalActiveChannel != hpwm->fActiveChannel) - { // update active channel - *LocalActiveChannel = hpwm->fActiveChannel; - // set deadtime - *LocalDeadTimeCnt = hpwm->PWM_DeadTime; - Trace_PWM_DeadTime_Enter(); - } - // decrement dead time - *LocalDeadTimeCnt -= (PWM_Get_Autoreload(hpwm)+1)*hpwm->stim.sTickBaseMHz; - if(*LocalDeadTimeCnt > 0) // if dead time is still active - { // reset all channels - // reset channels - PWM_Set_Compare1(hpwm, 0); - PWM_Set_Compare2(hpwm, 0); - } - else // if dead time is done - { // set it to zero - *LocalDeadTimeCnt = 0; - Trace_PWM_DeadTime_Exit(); - } -} - -/** - * @brief Filling table with one period of sinus values. - * @param hpwm - указатель на хендл ШИМ. - * @param table_size - размер таблицы. - * @note Формирует таблицу синусов размером table_size. - */ -uint32_t PWM_Fill_Sine_Table(PWM_HandleTypeDef *hpwm, uint32_t table_size) -{ - if((hpwm == NULL) || (hpwm->pDuty_Table_Origin == NULL) || (table_size == 0)) - { - return 0; - } - if (table_size > SIN_TABLE_SIZE_MAX) - table_size = SIN_TABLE_SIZE_MAX; - - - hpwm->Duty_Table_Size = table_size; - float pi_step = 2*M_PI/(hpwm->Duty_Table_Size); - float pi_val = 0; - float sin_koef = 0; - uint32_t sin_val = 0; - - // fill table with sinus - for(int i = 0; i < hpwm->Duty_Table_Size; i++) - { - // rotate pi - pi_val += pi_step; - // calc sin value - sin_koef = (float)0xFFFF; - sin_val = (sin(pi_val)+1)*sin_koef/2; - sin_table[i] = sin_val; - } - // fill rest of table with zeros - for(int i = hpwm->Duty_Table_Size; i < SIN_TABLE_SIZE_MAX; i++) - sin_table[i] = 0; - - // if second channel is enabled - PWM_Update_DutyTableScale(hpwm); - - return hpwm->Duty_Table_Size; -} - - - - - -/** - * @brief Calc and update new Duty Table Scale. - * @param hpwm - указатель на хендл ШИМ. - * @note Используется, когда изменяется значение регистра ARR. - */ -void PWM_Update_DutyTableScale(PWM_HandleTypeDef *hpwm) -{ - // UPDATE DUTY TABLE SCALE - if(PWM_Get_Mode(hpwm, PWM_CH_MODE)) // if second channel is enabled - { - hpwm->Duty_Table_Scale = PWM_Calc_Duty_Scale(&hpwm1, 0x8000); - } - else - { - hpwm->Duty_Table_Scale = PWM_Calc_Duty_Scale(&hpwm1, 0xFFFF); - } - // for case if min pulse dur is too big and scale is negative - if (hpwm->Duty_Table_Scale < 0) - hpwm->Duty_Table_Scale = 1; -} - -//------------------------------------------------------------------- -//-----------------------THREEPHASE FUNCTIONS------------------------ -/** - * @brief Initialization of Slave PWM TIM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @note Вызывает функции инициализации и включения слейв ШИМ. - */ -void PWM_SlavePhase_Init(PWM_SlaveHandleTypeDef *hspwm) -{ - TIM_Base_Init(&hspwm->stim); - TIM_Output_PWM_Init(&hspwm->stim.htim, &hspwm->hMasterPWM->sConfigOC, hspwm->PWM_Channel1, hspwm->GPIOx, hspwm->GPIO_PIN_X1); - TIM_Output_PWM_Init(&hspwm->stim.htim, &hspwm->hMasterPWM->sConfigOC, hspwm->PWM_Channel2, hspwm->GPIOx, hspwm->GPIO_PIN_X2); - - // if three phase enables - //----------TIMERS START------------- - HAL_TIM_Base_Start(&hspwm->stim.htim); - HAL_TIM_PWM_Start(&hspwm->stim.htim, hspwm->PWM_Channel1); // PWM channel 1 - HAL_TIM_PWM_Start(&hspwm->stim.htim, hspwm->PWM_Channel2); // PWM channel 2 - - if(PWM_Get_Mode(hspwm->hMasterPWM, PWM_PHASE_MODE) == 0) // if three phase disabled - { - PWM_Set_Compare1(hspwm, 0); // reset first channel - PWM_Set_Compare2(hspwm, 0); // reset second channel - } -} -/** - * @brief reInitialization of Slave PWM TIM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @note Перенастраивает таймер согласно принятным настройкам в pwm_ctrl. - */ -void PWM_SlavePhase_reInit(PWM_SlaveHandleTypeDef *hspwm) -{ - PWM_Slave_CopyTimSetting(hspwm, sTimFreqHz); - TIM_Base_MspDeInit(&hspwm->stim.htim); - - PWM_SlavePhase_Init(hspwm); -} - -/** - * @brief Set Duty from table on Slave PWM at one channel by sin_ind of the Master PWM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @param sin_ind - индекс таблицы для Мастер ШИМ. - * @note Индекс для свейл ШИМ расчитывается в самой функции. - */ -void PWM_SlavePhase_Set_DutyTable_Unsigned(PWM_SlaveHandleTypeDef *hspwm, uint16_t sin_ind) -{ - // if three phase enables - if (PWM_Get_Mode(hspwm->hMasterPWM, PWM_PHASE_MODE)) - { - if(hspwm->Duty_Shift_Ratio > 0) - sin_ind += hspwm->hMasterPWM->Duty_Table_Size*hspwm->Duty_Shift_Ratio; - else - sin_ind += hspwm->hMasterPWM->Duty_Table_Size*(1+hspwm->Duty_Shift_Ratio); - - // overflow check - if(sin_ind > hspwm->hMasterPWM->Duty_Table_Size) - sin_ind -= hspwm->hMasterPWM->Duty_Table_Size; - - PWM_Set_SlaveDuty_From_Table(hspwm, sin_ind); // set first channel - } -} - - -/** - * @brief Set Duty from table on Slave PWM at two channel by sin_ind of the Master PWM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @param sin_ind - индекс таблицы для Мастер ШИМ. - * @note Индекс для свейл ШИМ расчитывается в самой функции. - */ -void PWM_SlavePhase_Set_DutyTable_Signed(PWM_SlaveHandleTypeDef *hspwm, uint16_t sin_ind) -{ - int Duty; - // if three phase enables - if (PWM_Get_Mode(hspwm->hMasterPWM, PWM_PHASE_MODE)) - { - if(hspwm->Duty_Shift_Ratio > 0) - sin_ind += hspwm->hMasterPWM->Duty_Table_Size*hspwm->Duty_Shift_Ratio; - else - sin_ind += hspwm->hMasterPWM->Duty_Table_Size*(1+hspwm->Duty_Shift_Ratio); - - // overflow check - if(sin_ind >= hspwm->hMasterPWM->Duty_Table_Size) - sin_ind -= hspwm->hMasterPWM->Duty_Table_Size; - - Duty = PWM_Get_Table_Element_Signed(hspwm->hMasterPWM, sin_ind); - // если это первая полуволна - if(Duty > 0) - { - PWM_Set_Compare1(hspwm, Duty+PWM_Calc_Min_Duty(hspwm->hMasterPWM)); // set first channel - PWM_Set_Compare2(hspwm, 0); // reset second channel - } - else // если это вторая полуволна - { - PWM_Set_Compare1(hspwm, 0); // reset first channel - PWM_Set_Compare2(hspwm, (-Duty)+PWM_Calc_Min_Duty(hspwm->hMasterPWM)); // set second channel - } - //if(hspwm == &hpwm2) - //__ASM(""); - } - else // if three phase disabled - { - PWM_Set_Compare1(hspwm, 0); // reset first channel - PWM_Set_Compare2(hspwm, 0); // reset second channel - } -} - - -/** - * @brief Check is all Slave channels works properly. - * @param hspwm - указатель на хендл слейв ШИМ. - * @note Проверка работает ли только один из каналов, и проверка чтобы CCRx <= ARR - * @note В мастере проверка происходит напрямую в PWM_Handler. - */ -void PWM_SlavePhase_Check_Channels(PWM_SlaveHandleTypeDef *hspwm) -{ - // if three phase enables - if (PWM_Get_Mode(hspwm->hMasterPWM, PWM_PHASE_MODE)) - { - uint16_t min_duty = PWM_Calc_Min_Duty(hspwm->hMasterPWM); - // IF FIRST CHANNEL IS ACRIVE - if(PWM_Get_Compare1(hspwm) != 0) - { - // Duty shoud be bigger or equeal than min duration - if (PWM_Get_Compare1(hspwm)PWM_Get_Autoreload(hspwm)-min_duty) - PWM_Set_Compare1(hspwm, PWM_Get_Autoreload(hspwm)-min_duty); - } - // IF SECOND CHANNEL IS ACRIVE - else if(PWM_Get_Compare2(hspwm) != 0) - // Duty shoud be bigger or equeal than min duration - if (PWM_Get_Compare2(hspwm)PWM_Get_Autoreload(hspwm)-min_duty) - PWM_Set_Compare2(hspwm, PWM_Get_Autoreload(hspwm)-min_duty); - // IF BOTH CHANNEL IS ACRIVE - if((PWM_Get_Compare1(hspwm) != 0) && (PWM_Get_Compare2(hspwm) != 0)) - { - // Only one channel shoud be active so disable all - PWM_Set_Compare1(hspwm, 0); - PWM_Set_Compare2(hspwm, 0); - } - } - else - { - // reset channels - PWM_Set_Compare1(hspwm, 0); // reset first channel - PWM_Set_Compare2(hspwm, 0); // reset second channel - } -} - -/** - * @brief Create Dead Time for Slave PWM when switches channels. - * @param hspwm - указатель на хендл слейв ШИМ. - * @param LocalDeadTimeCnt - указатель на переменную для отсчитывания дедтайма. - * @param LocalActiveChannel - указатель на переменную для отслеживания смены канала. - * @note Аналог функции PWM_CreateDeadTime но для слейв ШИМов. - */ -void PWM_SlavePhase_CreateDeadTime(PWM_SlaveHandleTypeDef *hspwm, float *LocalDeadTimeCnt, unsigned *LocalActiveChannel) -{ - // get current active channel - hspwm->fActiveChannel = (PWM_Get_Compare2(hspwm) != 0); // if channel two is active - write 1, otherwise - 0 - // when channels are swithed and no dead time currently active - if(*LocalActiveChannel != hspwm->fActiveChannel) - { // update active channel - *LocalActiveChannel = hspwm->fActiveChannel; - // set deadtime - *LocalDeadTimeCnt = hspwm->hMasterPWM->PWM_DeadTime; - Trace_PWM_DeadTime_Enter(); - } - // decrement dead time - *LocalDeadTimeCnt -= (PWM_Get_Autoreload(hspwm)+1)*hspwm->hMasterPWM->stim.sTickBaseMHz; - if(*LocalDeadTimeCnt > 0) // if dead time is still active - { // reset all channels - // reset channels - PWM_Set_Compare1(hspwm, 0); - PWM_Set_Compare2(hspwm, 0); - } - else // if dead time is done - { // set it to zero - *LocalDeadTimeCnt = 0; - Trace_PWM_DeadTime_Exit(); - } -} -//------------------------------------------------------------------- -//------------------------HANDLERS FUNCTIONS------------------------- -//---------------PWM TIMER----------------- -#if (PWM_MASTER_TIM_NUMB == 1) || (PWM_MASTER_TIM_NUMB == 10) // choose handler for TIM -void TIM1_UP_TIM10_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 2) -void TIM2_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 3) -void TIM3_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 4) -void TIM4_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 5) -void TIM5_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 6) -void TIM6_DAC_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 7) -void TIM7_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 8) || (PWM_MASTER_TIM_NUMB == 13) -void TIM8_UP_TIM13_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 1) || (PWM_MASTER_TIM_NUMB == 9) -void TIM1_BRK_TIM9_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 1) || (PWM_MASTER_TIM_NUMB == 11) -void TIM1_TRG_COM_TIM11_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 8) || (PWM_MASTER_TIM_NUMB == 12) -void TIM8_BRK_TIM12_IRQHandler(void) -#elif (PWM_MASTER_TIM_NUMB == 8) || (PWM_MASTER_TIM_NUMB == 14) -void TIM8_TRG_COM_TIM14_IRQHandler(void) -#endif -{ - Trace_PWM_TIM_Enter(); - HAL_TIM_IRQHandler(&hpwm1.stim.htim); - PWM_Handler(&hpwm1); - - Trace_PWM_TIM_Exit(); -} - - - - - - -//------------------------------------------------------------------- -//------------------------------------------------------------------- -//-----------------------------OUTDATE------------------------------- -#ifdef OUTDATE -/** - * @brief First set up of PWM Single Channel. - * @note Первый инит ШИМ. Заполняет структуры и инициализирует таймер для генерации синуоидального ШИМ. - * Скважность ШИМ меняется по закону синусоиды, сдвинутой в положительную область (от 0 до 2) - * ШИМ генерируется на одном канале. - * @note This called from main - */ -void PWM_SineSingChannel_FirstInit(void) -{ - hpwm1.pDuty_Table_Origin = SIN_TABLE_ORIGIN; - - //---------PWM TIMER1 INIT------------ - // channel settings - hpwm1.sConfigOC.OCMode = TIM_OCMODE_PWM1; - hpwm1.sConfigOC.Pulse = 0; - hpwm1.sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; - hpwm1.sConfigOC.OCFastMode = TIM_OCFAST_DISABLE; - - // tim1 settings - hpwm1.stim.htim.Instance = TIMER_PWM1_INSTANCE; - hpwm1.stim.sTimMode = TIM_IT_MODE; - hpwm1.stim.sTickBaseMHz = TIM_TickBase_1US; - hpwm1.stim.sTimAHBFreqMHz = 72; - hpwm1.stim.sTimFreqHz = HZ_TIMER_PWM; - hpwm1.GPIOx = GPIOD; - hpwm1.GPIO_PIN_X1 = GPIO_PIN_12; - - TIM_Base_Init(&hpwm1.stim); - TIM_Output_PWM_Init(&hpwm1.stim.htim, &hpwm1.sConfigOC, hpwm->PWM_Channel1, hpwm1.GPIOx, hpwm1.GPIO_PIN_X1); - - - - - //----------TIMERS START------------- - HAL_TIM_PWM_Start_IT(&hpwm1.stim.htim, hpwm->PWM_Channel1); // timer for PWM -} - - -#ifdef SINE_THREE_PHASE_PWM_ENABLE - - //---------PWM TIMER2 INIT------------ - // tim2 settings - hpwm2 = hpwm1; - hpwm2.stim.htim.Instance = TIM5; - hpwm2.GPIOx = GPIOA; - hpwm2.GPIO_PIN_X = GPIO_PIN_0; - - TIM_Base_Init(&hpwm2.stim); - TIM_Output_PWM_Init(&hpwm2.stim.htim, &hpwm2.sConfigOC, TIM_CHANNEL_1, hpwm2.GPIOx, hpwm2.GPIO_PIN_X); - - //---------PWM TIMER3 INIT------------ - // tim3 settings - hpwm3 = hpwm2; - hpwm3.stim.htim.Instance = TIM8; - hpwm3.GPIOx = GPIOC; - hpwm3.GPIO_PIN_X = GPIO_PIN_6; - - TIM_Base_Init(&hpwm3.stim); - TIM_Output_PWM_Init(&hpwm3.stim.htim, &hpwm3.sConfigOC, TIM_CHANNEL_1, hpwm3.GPIOx, hpwm3.GPIO_PIN_X); - - HAL_TIM_PWM_Start(&hpwm2.stim.htim, TIM_CHANNEL_1); // timer for PWM - HAL_TIM_PWM_Start(&hpwm3.stim.htim, TIM_CHANNEL_1); // timer for PWM -#endif // SINE_THREE_PHASE_PWM_ENABLE - -void PWM_Threephase_Init(void) -{ -#ifdef INTERNAL_THREE_PHASE_PWM_ENABLE - TIM_OC_InitTypeDef sPWMConfigOC = {0}; - TIM_OC_InitTypeDef sOCConfigOC = {0}; - int us100Time = 10000/TIM_CTRL.sTimFreqHz; // 1/TIM_CTRL.sTimFreqHz * 10^6 - Sample time in us - - // PWM CHANNEL SETTINGS - sPWMConfigOC.OCMode = TIM_OCMODE_PWM1; - sPWMConfigOC.Pulse = us100Time/2; - sPWMConfigOC.OCPolarity = TIM_OCPOLARITY_LOW; - sPWMConfigOC.OCFastMode = TIM_OCFAST_DISABLE; - - // CC CHANNEL SETTINGS - sOCConfigOC.OCMode = TIM_OCMODE_ACTIVE; - sOCConfigOC.Pulse = (2*us100Time-1) / 3; - sOCConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; - - - // TIMER1 PWM MASTER INIT - TIM_3PWM1.htim = &tim_3pwm1; - TIM_3PWM1.htim->Instance = TIM1; - TIM_3PWM1.htim->Init.Prescaler = 7200-1; // 1 us - TIM_3PWM1.htim->Init.Period = us100Time-1; // period in us = Sample time in us - - TIM_3PWM1.sMasterConfig.MasterOutputTrigger = TIM_TRGO_OC2REF; - TIM_3PWM1.sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; - - TIM_3PWM1.sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH; - - TIM_Base_Init(&TIM_3PWM1); - TIM_Output_PWM_Init(TIM_3PWM1.htim, &sPWMConfigOC, TIM_CHANNEL_1, GPIOE, GPIO_PIN_9); - HAL_TIM_OC_ConfigChannel(TIM_3PWM1.htim, &sOCConfigOC, TIM_CHANNEL_2); - - - // TIMER2 PWM SLAVE INIT - TIM_3PWM2 = TIM_3PWM1; - TIM_3PWM2.htim = &tim_3pwm2; - *TIM_3PWM2.htim = *TIM_3PWM1.htim; - TIM_3PWM2.htim->Instance = TIM2; - TIM_3PWM1.TIM_MODE = TIM_DEFAULT; - - TIM_3PWM2.sSlaveConfig.SlaveMode = TIM_SLAVEMODE_TRIGGER; - TIM_3PWM2.sSlaveConfig.InputTrigger = TIM_TS_ITR0; - - TIM_Base_Init(&TIM_3PWM2); - TIM_Output_PWM_Init(TIM_3PWM2.htim, &sPWMConfigOC, TIM_CHANNEL_1, GPIOA, GPIO_PIN_5); - HAL_TIM_OC_ConfigChannel(TIM_3PWM2.htim, &sOCConfigOC, TIM_CHANNEL_2); - - - - // TIMER3 PWM SLAVE INIT - TIM_3PWM3 = TIM_3PWM2; - TIM_3PWM3.htim = &tim_3pwm3; - *TIM_3PWM3.htim = *TIM_3PWM2.htim; - TIM_3PWM3.htim->Instance = TIM3; - TIM_3PWM3.sSlaveConfig.InputTrigger = TIM_TS_ITR1; - - TIM_Base_Init(&TIM_3PWM3); - TIM_Output_PWM_Init(TIM_3PWM3.htim, &sPWMConfigOC, TIM_CHANNEL_1, GPIOA, GPIO_PIN_6); - - hpwm1.Duty_Table_Size = PWM_Fill_Sine_Table(&sin_table, SIN_TABLE_SIZE_MAX); - - // TIMERS START - HAL_TIM_OC_Start(TIM_3PWM3.htim, TIM_CHANNEL_2); - HAL_TIM_PWM_Start(TIM_3PWM3.htim, TIM_CHANNEL_1); - - HAL_TIM_PWM_Start(TIM_3PWM2.htim, TIM_CHANNEL_1); - HAL_TIM_OC_Start(TIM_3PWM2.htim, TIM_CHANNEL_2); - - HAL_TIM_OC_Start(TIM_3PWM1.htim, TIM_CHANNEL_2); - HAL_TIM_PWM_Start(TIM_3PWM1.htim, TIM_CHANNEL_1); -#endif // INTERNAL_THREE_PHASE_PWM_ENABLE - -} -#endif diff --git a/Code/PWM/pwm.h b/Code/PWM/pwm.h deleted file mode 100644 index 093909d..0000000 --- a/Code/PWM/pwm.h +++ /dev/null @@ -1,324 +0,0 @@ -/********************************MODBUS************************************* -Данный файл содержит объявления базовых функции и дефайны для реализации -MODBUS. -Данный файл необходимо подключить в rs_message.h. После подключать rs_message.h -к основному проекту. -***************************************************************************/ -#ifndef __PWM_H_ -#define __PWM_H_ -#include "control.h" - - - -extern uint32_t sin_table[SIN_TABLE_SIZE_MAX]; - -#define int_to_percent(_int_) ((float)_int_/100) - - -///////////////////////////////////////////////////////////////////// -////////////////////////////---DEFINES---//////////////////////////// -//----------------------------PWM HANDLE----------------------------// -/** - * @brief Calc duration of minimum pulse in ticks. - * @param _hpwm_ - указатель на хендл pwm. - * @return _val_ - количество тиков кратчайшего импульса. - */ -#define PWM_Calc_Min_Duty(_hpwm_) ((_hpwm_)->PWM_MinPulseDur/(_hpwm_)->stim.sTickBaseMHz) -/** - * @brief Calc Scale Koef for Table & AUTORELOAD REGISTER - * @param _hpwm_ - указатель на хендл pwm. - * @param _scale_ - верхняя граница диапазона значений. - * @return _koef_ - коэффициент для масштабирования. - * @note Данный макрос рассчитывает коэффициент для приведения значений с диапазоном [0,_scale_] - к регистру автозагрузки с диапазоном [0,ARR]. - * @note Если задана минимальная длительность импульса в тактах n, она вычитается из ARR: [0, ARR-2*n] - И потом регистр ARR заполняется так, что диапазон его значений будет [n, ARR-n] @ref PWM_Get_Table_Element_Unsigned - */ -#define PWM_Calc_Duty_Scale(_hpwm_, _scale_) ((float)PWM_Get_Autoreload(_hpwm_))/(_scale_) - -/** - * @brief Get Table Element Scaled corresponding to TIM ARR register - * @param _hpwm_ - указатель на хендл pwm. - * @param _ind_ - номер элемента из таблицы скважностей. - * @return _val_ - масштабированный под регистры таймера значение. - * @note Если задана минимальная длительность импульса в тактах n, - то регистр ARR заполняется так, что диапазон его значений будет [n, ARR-n] - */ -#define PWM_Get_Table_Element_Unsigned(_hpwm_,_ind_) (*((_hpwm_)->pDuty_Table_Origin+_ind_)*((_hpwm_)->Duty_Table_Scale)) - -/** - * @brief Get Table Element Scaled and Shifted corresponding to TIM ARR register - * @param _hpwm_ - указатель на хендл pwm. - * @param _ind_ - номер элемента из таблицы скважностей. - * @return _val_ - масштабированный под регистры таймера значение. - * @note По сути такая же как PWM_Get_Table_Element_Unsigned но добавляется сдвиг на одну амплитуду для учитывания знака. - (если точнее, то сдвиг добавляется для компенсации сдвига, который имитирует знак) - * @note 0x8000*(_hpwm_)->Duty_Table_Scale - т.к. первая полуволна находится в диапазоне (0x8000-0xFFFF) вычитаем константу 0x8000 с масштабированием - */ -#define PWM_Get_Table_Element_Signed(_hpwm_,_ind_) ((int)(*((_hpwm_)->pDuty_Table_Origin+_ind_)*((_hpwm_)->Duty_Table_Scale))-0x8000*(_hpwm_)->Duty_Table_Scale) -/** - * @brief Create pointer to slave PWM from pointer to void in PWM_HandleTypeDef. - * @param _hpwm_ - указатель на хендл pwm. - * @param _slavepwm_ - имя слейв pwm. - * @return _pslavepwm_ - указатель на структуру PWM_SlaveHandleTypeDef. - */ -#define PWM_Set_pSlaveHandle(_hpwm_,_slavepwm_) ((PWM_SlaveHandleTypeDef *)_hpwm_->_slavepwm_) -/** - * @brief Copy setting from master TIM_SettingsTypeDef to slave TIM_SettingsTypeDef. - * @param _hpwm_ - указатель на хендл pwm. - * @return _set_ - имя настройки. - */ -#define PWM_Slave_CopyTimSetting(_hspwm_, _set_) ((_hspwm_)->stim._set_ = (_hspwm_)->hMasterPWM->stim._set_) - -//---------------------------TIMER REGS----------------------------// -/** - * @brief Set PWM autoreload value (max duty value). - * @param _hpwm_ - указатель на хендл pwm. - * @param _val_ - значение, которое нужно записать в Compare. - */ -#define PWM_Get_Autoreload(_hpwm_) __HAL_TIM_GET_AUTORELOAD(&((_hpwm_)->stim.htim)) - -/** - * @brief Get PWM Duty on corresponding channel. - * @param _hpwm_ - указатель на хендл pwm. - * @param _val_ - значение, которое нужно записать в Compare. - */ -#define PWM_Get_Compare1(_hpwm_) __HAL_TIM_GET_COMPARE(&((_hpwm_)->stim.htim), (_hpwm_)->PWM_Channel1) -#define PWM_Get_Compare2(_hpwm_) __HAL_TIM_GET_COMPARE(&((_hpwm_)->stim.htim), (_hpwm_)->PWM_Channel2) - -/** - * @brief Set PWM Duty on corresponding channel. - * @param _hpwm_ - указатель на хендл pwm. - * @param _val_ - значение, которое нужно записать в Compare. - */ -#define PWM_Set_Compare1(_hpwm_, _val_) __HAL_TIM_SET_COMPARE(&((_hpwm_)->stim.htim), (_hpwm_)->PWM_Channel1, (_val_)) -#define PWM_Set_Compare2(_hpwm_, _val_) __HAL_TIM_SET_COMPARE(&((_hpwm_)->stim.htim), (_hpwm_)->PWM_Channel2, (_val_)) - -/** - * @brief Set PWM Duty From PWM_Value Percent - * @param _hpwm_ - указатель на хендл pwm. - * @param _channel_ - канал для выставления скважности. - * @param _ind_ - номер элемента из таблицы скважностей. - */ -#define PWM_Set_Duty_From_Percent(_hpwm_, _channel_) __HAL_TIM_SET_COMPARE(&((_hpwm_)->stim.htim), _channel_, ((_hpwm_)->PWM_Value/100)*(PWM_Get_Autoreload(_hpwm_)+1)) - -/** - * @brief Set PWM Duty From table - * @param _hpwm_ - указатель на хендл pwm. - * @param _channel_ - канал для выставления скважности. - * @param _ind_ - номер элемента из таблицы скважностей. - */ -#define PWM_Set_Duty_From_Table(_hpwm_, _ind_) (PWM_Set_Compare1(_hpwm_, (PWM_Get_Table_Element_Unsigned((_hpwm_), (_ind_))+1))) - -/** - * @brief Set PWM Duty From table - * @param _hpwm_ - указатель на хендл pwm. - * @param _channel_ - канал для выставления скважности. - * @param _ind_ - номер элемента из таблицы скважностей. - */ -#define PWM_Set_SlaveDuty_From_Table(_hpwm_, _ind_) (PWM_Set_Compare1(_hpwm_, (PWM_Get_Table_Element_Unsigned((_hpwm_)->hMasterPWM, (_ind_))+1))) - - -// MODE DEFINES -#define PWM_DC_MODE_Pos (0) -#define PWM_CH_MODE_Pos (1) -#define PWM_PHASE_MODE_Pos (2) - -#define PWM_DC_MODE (1<<(PWM_DC_MODE_Pos)) // 0 - set pwm duty from table with PWM_Value period, 1 - set pwm duty PWM_Value (in percent) -#define PWM_CH_MODE (1<<(PWM_CH_MODE_Pos)) -// DC MODE: 0 - pwm on channel 1, 1 - pwm on channel 2 -// TABLE MODE: 0 - signed mode, 1 - unsigned mode -#define PWM_PHASE_MODE (1<<(PWM_PHASE_MODE_Pos)) - -#define PWM_Get_Mode(_hpwm_, _mode_) ((_hpwm_)->sPWM_Mode&(_mode_)) -/* Structure for PWM modes */ -typedef enum -{ - PWM_TABLE_UNSIGN = 0, /* set pwm duty from table with PWM_Value period */ - PWM_TABLE_SIGN = PWM_CH_MODE, /* set pwm duty from table with PWM_Value period on two channels (positive and negative halfes) */ - PWM_DC_POS = PWM_DC_MODE, /* set pwm duty PWM_Value (in percent) on first channel */ - PWM_DC_NEG = PWM_DC_MODE|PWM_CH_MODE, /* set pwm duty PWM_Value (in percent) on second channel */ - - PWM_PHASE_UNSIGN = PWM_PHASE_MODE, /* set pwm table duty on three pins, with requested shift */ - PWM_PHASE_SIGN = PWM_CH_MODE|PWM_PHASE_MODE, /* set pwm table duty on six pins (two pins = one phase (positive and negative halfes)) */ -}PWM_ModeTypeDef; - - -/** - * @brief Handle for PWM. - * @note Prefixes: h - handle, s - settings, f - flag - */ -typedef struct // PWM_HandleTypeDef -{ - /* PWM VARIABLES */ - PWM_ModeTypeDef sPWM_Mode; /* PWM Mode: 0 - DC mode, 1 - Table mode */ - float PWM_Value; /* DC mode: PWM duty, Table mode: frequency*/ - uint32_t PWM_MinPulseDur; /* minimum pulse duration for PWM in us*/ - uint32_t PWM_DeadTime; /* dead-Time between switches half waves (channels) in us */ - - /* SETTINGS FOR TIMER */ - TIM_SettingsTypeDef stim; /* settings for TIM */ - TIM_OC_InitTypeDef sConfigOC; /* settings for oc channel */ - unsigned fActiveChannel; /* flag for active oc channel: 0 - first channel, 1 - second channel */ - uint16_t PWM_Channel1; /* instance of first channel */ - uint16_t PWM_Channel2; /* instance of second channel */ - - /* VARIABLES FOR TABLE DUTY PARAMETERS */ - uint32_t *pDuty_Table_Origin; /* pointer to table of pwm duties */ - uint32_t Duty_Table_Size; /* size of duty table */ - float Duty_Table_Ind; /* current ind of duty table */ - float Duty_Table_Scale; /* scale for TIM ARR register */ - - /* SETTIGNS FOR PWM OUTPUT */ - GPIO_TypeDef *GPIOx; /* GPIO port for PWM output */ - uint32_t GPIO_PIN_X1; /* GPIO pin for PWM output */ - uint32_t GPIO_PIN_X2; /* GPIO pin for PWM output (second half wave) */ - - /* SLAVES PWM */ - void *hpwm2; - void *hpwm3; - -}PWM_HandleTypeDef; -extern PWM_HandleTypeDef hpwm1; - -/** - * @brief Handle for Slave PWM. - * @note Prefixes: h - handle, s - settings, f - flag - */ -typedef struct // PWM_SlaveHandleTypeDef -{ - /* MASTER PWM*/ - PWM_HandleTypeDef *hMasterPWM; /* master pwm handle */ - - /* SETTINGS FOR TIMER */ - TIM_SettingsTypeDef stim; /* slave tim handle */ - unsigned fActiveChannel; /* flag for active oc channel: 0 - first channel, 1 - second channel */ - uint16_t PWM_Channel1; /* instance of first channel */ - uint16_t PWM_Channel2; /* instance of second channel */ - - /* VARIABLES FOR TABLE DUTY PARAMETERS */ - float Duty_Table_Ind; /* current ind of duty table */ - float Duty_Shift_Ratio; /* Ratio of table shift: 0.5 shift - shift = Table_Size/2 */ - - /* SETTIGNS FOR PWM OUTPUT */ - GPIO_TypeDef *GPIOx; /* GPIO port for PWM output */ - uint32_t GPIO_PIN_X1; /* GPIO pin for PWM output */ - uint32_t GPIO_PIN_X2; /* GPIO pin for PWM output (second half wave) */ -}PWM_SlaveHandleTypeDef; -extern PWM_SlaveHandleTypeDef hpwm2; -extern PWM_SlaveHandleTypeDef hpwm3; - -//--------------------------------PWM FUNCTIONS---------------------------------- -/** - * @brief reInitialization of PWM TIM. - * @param hpwm - указатель на хендл ШИМ. - * @note Перенастраивает таймер согласно принятным настройкам в pwm_ctrl. - */ -void PWM_Sine_ReInit(PWM_HandleTypeDef *hpwm); - -/** - * @brief Initialization of Slave PWM TIM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @note Вызывает функции инициализации и включения слейв ШИМ. - */ -void PWM_SlavePhase_Init(PWM_SlaveHandleTypeDef *hspwm); -/** - * @brief reInitialization of Slave PWM TIM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @note Перенастраивает таймер согласно принятным настройкам в pwm_ctrl. - */ -void PWM_SlavePhase_reInit(PWM_SlaveHandleTypeDef *hspwm); - -/** - * @brief Filling table with one period of sinus values. - * @param hpwm - указатель на хендл ШИМ. - * @param table_size - размер таблицы. - * @note Формирует таблицу синусов размером table_size. - */ -uint32_t PWM_Fill_Sine_Table(PWM_HandleTypeDef *hpwm, uint32_t table_size); - -/** - * @brief Calc and update new Duty Table Scale. - * @param hpwm - указатель на хендл ШИМ. - * @note Используется, когда изменяется значение регистра ARR. - */ -void PWM_Update_DutyTableScale(PWM_HandleTypeDef *hpwm); -//---------------------this called from TIM_PWM_Handler()------------------------ -// MASTER PWM FUNCTIONS -/** - * @brief PWM Handler. - * @param hpwm - указатель на хендл ШИМ. - * @note Управляет скважность ШИМ в режиме PWM_TABLE. - * @note This called from TIM_PWM_Handler - */ -void PWM_Handler(PWM_HandleTypeDef *hpwm); -/** - * @brief Getting ind for Duty Table. - * @param hpwm - указатель на хендл ШИМ. - * @param FreqTIM - частота таймера ШИМ. - * @note Рассчитывает индекс для таблицы скважностей. - * PWM_Value в hpwm - частота с которой эта таблица должна выводиться на ШИМ - * @note This called from TIM_PWM_Handler - */ -uint32_t PWM_Get_Duty_Table_Ind(PWM_HandleTypeDef *hpwm, float FreqTIM); - -/** - * @brief Create Dead Time when switches channels. - * @param hpwm - указатель на хендл ШИМ. - * @param LocalDeadTimeCnt - указатель на переменную для отсчитывания дедтайма. - * @param LocalActiveChannel - указатель на переменную для отслеживания смены канала. - */ -void PWM_CreateDeadTime(PWM_HandleTypeDef *hpwm, float *LocalDeadTimeCnt, unsigned *LocalActiveChannel); - -// SLAVE PWM FUNCTIONS -/** - * @brief Set Duty from table on Slave PWM at one channel by sin_ind of the Master PWM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @param sin_ind - индекс таблицы для Мастер ШИМ. - * @note Индекс для свейл ШИМ расчитывается в самой функции. - */ -void PWM_SlavePhase_Set_DutyTable_Unsigned(PWM_SlaveHandleTypeDef *hspwm, uint16_t sin_ind); -/** - * @brief Set Duty from table on Slave PWM at two channel by sin_ind of the Master PWM. - * @param hspwm - указатель на хендл слейв ШИМ. - * @param sin_ind - индекс таблицы для Мастер ШИМ. - * @note Индекс для свейл ШИМ расчитывается в самой функции. - */ -void PWM_SlavePhase_Set_DutyTable_Signed(PWM_SlaveHandleTypeDef *hspwm, uint16_t sin_ind); -/** - * @brief Check is all Slave channels works properly. - * @param hspwm - указатель на хендл слейв ШИМ. - * @note Проверка работает ли только один из каналов, и проверка чтобы CCRx <= ARR - * @note В мастере проверка происходит напрямую в PWM_Handler. - */ -void PWM_SlavePhase_Check_Channels(PWM_SlaveHandleTypeDef *hspwm); -/** - * @brief Create Dead Time for Slave PWM when switches channels. - * @param hspwm - указатель на хендл слейв ШИМ. - * @param LocalDeadTimeCnt - указатель на переменную для отсчитывания дедтайма. - * @param LocalActiveChannel - указатель на переменную для отслеживания смены канала. - * @note Аналог функции PWM_CreateDeadTime но для слейв ШИМов. - */ -void PWM_SlavePhase_CreateDeadTime(PWM_SlaveHandleTypeDef *hspwm, float *LocalDeadTimeCnt, unsigned *LocalActiveChannel); -//---------------------this called from TIM_CTRL_Handler()----------------------- -/** - * @brief Update PWM parameters. - * @param hpwm - указатель на хендл ШИМ. - * @note Проверка надо ли обновлять параметры ШИМ, и если надо - обновляет их. - * @note This called from TIM_CTRL_Handler - */ -void Update_Params_For_PWM(PWM_HandleTypeDef *hpwm); - - -//---------------------------this called from main()----------------------------- -/** - * @brief First set up of PWM Two Channel. - * @note Первый инит ШИМ. Заполняет структуры и инициализирует таймер для генерации синуоидального ШИМ. - * Скважность ШИМ меняется по закону синусоиды, каждый канал генерирует свой полупериод синуса (от -1 до 0 И от 0 до 1) - * ШИМ генерируется на одном канале. - * @note This called from main OR by setted coil - */ -void PWM_Sine_FirstInit(void); - - -#endif // __PWM_H_ \ No newline at end of file diff --git a/Code/PWM/settings.c b/Code/PWM/settings.c deleted file mode 100644 index 4f56115..0000000 --- a/Code/PWM/settings.c +++ /dev/null @@ -1,265 +0,0 @@ -#include "control.h" -ProjectSettings_TypeDef PROJSET; -uint32_t PageError = 0x00; - uint8_t UpdateSettings = 0; - -void WriteSettingsToMem(void) -{ - FillStructWithDefines(); - //HAL_FLASH_Unlock(); - // - //CheckSettingsInFLASH(); - // - //if(CheckIsSettingsValid(&PROJSET)) // if new settings are invalid - // PROJSET = *PROJSET_MEM; // take the old settings from mem - //else // if new settings are valid - // SetFlagUpdateSettingsInMem(); // save the new settings in mem (set flag to do this) - // - //HAL_FLASH_Lock(); - -} - -void SetFlagUpdateSettingsInMem(void) -{ - //UpdateSettings = 0; - //// MODBUS settings - //if(PROJSET_MEM->MB_DEVICE_ID != PROJSET.MB_DEVICE_ID) - // UpdateSettings = 1; - //if(PROJSET_MEM->MB_SPEED != PROJSET.MB_SPEED) - // UpdateSettings = 1; - //if(PROJSET_MEM->MB_GPIOX != PROJSET.MB_GPIOX) - // UpdateSettings = 1; - //if(PROJSET_MEM->MB_GPIO_PIN_RX != PROJSET.MB_GPIO_PIN_RX) - // UpdateSettings = 1; - //if(PROJSET_MEM->MB_GPIO_PIN_RX != PROJSET.MB_GPIO_PIN_RX) - // UpdateSettings = 1; - //if(PROJSET_MEM->MB_MAX_TIMEOUT != PROJSET.MB_MAX_TIMEOUT) - // UpdateSettings = 1; - // - //// PWM settings - //if(PROJSET_MEM->TIM_PWM_TICKBASE != PROJSET.TIM_PWM_TICKBASE) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM_AHB_FREQ != PROJSET.TIM_PWM_AHB_FREQ) - // UpdateSettings = 1; - // - //if(PROJSET_MEM->TIM_PWM1_TIM_CHANNEL1 != PROJSET.TIM_PWM1_TIM_CHANNEL1) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM1_TIM_CHANNEL2 != PROJSET.TIM_PWM1_TIM_CHANNEL2) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM1_GPIOx != PROJSET.TIM_PWM1_GPIOx) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM1_GPIO_PIN_X1 != PROJSET.TIM_PWM1_GPIO_PIN_X1) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM1_GPIO_PIN_X2 != PROJSET.TIM_PWM1_GPIO_PIN_X2) - // UpdateSettings = 1; - // - //if(PROJSET_MEM->TIM_PWM2_INSTANCE != PROJSET.TIM_PWM2_INSTANCE) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM2_TIM_CHANNEL1 != PROJSET.TIM_PWM2_TIM_CHANNEL1) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM2_TIM_CHANNEL2 != PROJSET.TIM_PWM2_TIM_CHANNEL2) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM2_GPIOx != PROJSET.TIM_PWM2_GPIOx) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM2_GPIO_PIN_X1 != PROJSET.TIM_PWM2_GPIO_PIN_X1) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM2_GPIO_PIN_X2 != PROJSET.TIM_PWM2_GPIO_PIN_X2) - // UpdateSettings = 1; - // - //if(PROJSET_MEM->TIM_PWM3_INSTANCE != PROJSET.TIM_PWM3_INSTANCE) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM3_TIM_CHANNEL1 != PROJSET.TIM_PWM3_TIM_CHANNEL1) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM3_TIM_CHANNEL2 != PROJSET.TIM_PWM3_TIM_CHANNEL2) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM3_GPIOx != PROJSET.TIM_PWM3_GPIOx) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM3_GPIO_PIN_X1 != PROJSET.TIM_PWM3_GPIO_PIN_X1) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_PWM3_GPIO_PIN_X2 != PROJSET.TIM_PWM3_GPIO_PIN_X2) - // UpdateSettings = 1; - // - //// CTRL settings - //if(PROJSET_MEM->TIM_CTRL_TICKBASE != PROJSET.TIM_CTRL_TICKBASE) - // UpdateSettings = 1; - //if(PROJSET_MEM->TIM_CTRL_AHB_FREQ != PROJSET.TIM_CTRL_AHB_FREQ) - // UpdateSettings = 1; -} - - -void UpdateSettingsInMem(void) -{ - //if(UpdateSettings) - //{ - // FLASH_EraseInitTypeDef EraseInitStruct; - // PageError = 0x00; - // - // EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS;// erase pages - // EraseInitStruct.Banks = FLASH_BANK_1; - // EraseInitStruct.Sector = FLASH_SECTOR_4; //first sector for erase - // EraseInitStruct.NbSectors = 1;// num of sector that need to be erased - // - // HAL_FLASH_Unlock(); - // HAL_FLASHEx_Erase(&EraseInitStruct, &PageError); - // - // - // /* Wait for last operation to be completed */ - // if(FLASH_WaitForLastOperation((uint32_t)50000U) == HAL_OK) - // { - // /* If the previous operation is completed, proceed to program the new data */ - // CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - // FLASH->CR |= FLASH_PSIZE_WORD; - // FLASH->CR |= FLASH_CR_PG; - // *PROJSET_MEM = PROJSET; // save the new settings in mem - // } - // HAL_FLASH_Lock(); - // UpdateSettings = 0; - //} -} - -void FillSettingsWithDefines(void) -{ - // rewrite all setting corresponding to defines - - //FLASH_EraseInitTypeDef EraseInitStruct; - //PageError = 0x00; - // - //EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS;// erase pages - //EraseInitStruct.Banks = FLASH_BANK_1; - //EraseInitStruct.Sector = FLASH_SECTOR_4; //first sector for erase - //EraseInitStruct.NbSectors = 1;// num of sector that need to be erased - // - //HAL_FLASH_Unlock(); - //HAL_FLASHEx_Erase(&EraseInitStruct, &PageError); - //// MODBUS settings - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_DEVICE_ID, MODBUS_DEVICE_ID); - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_SPEED, MODBUS_SPEED); - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_GPIOX, (uint32_t)MODBUS_GPIOX); - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_GPIO_PIN_RX, MODBUS_GPIO_PIN_RX); - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_GPIO_PIN_TX, MODBUS_GPIO_PIN_TX); - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_MAX_TIMEOUT, MODBUS_MAX_TIMEOUT); - //FLASH_WRITE_SETTING(PROJSET_MEM->MB_TIM_AHB_FREQ, MODBUS_TIM_AHB_FREQ); - // - //// PWM settings - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM_TICKBASE, TIMER_PWM_TICKBASE); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM_AHB_FREQ, TIMER_PWM_AHB_FREQ); - // - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM1_TIM_CHANNEL1, TIMER_PWM1_TIM_CHANNEL1); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM1_TIM_CHANNEL2, TIMER_PWM1_TIM_CHANNEL2); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM1_GPIOx, (uint32_t)TIMER_PWM1_GPIOx); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM1_GPIO_PIN_X1, TIMER_PWM1_GPIO_PIN_X1); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM1_GPIO_PIN_X2, TIMER_PWM1_GPIO_PIN_X2); - // - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM2_INSTANCE, (uint32_t)TIMER_PWM2_INSTANCE); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM2_TIM_CHANNEL1, TIMER_PWM2_TIM_CHANNEL1); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM2_TIM_CHANNEL2, TIMER_PWM2_TIM_CHANNEL2); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM2_GPIOx, (uint32_t)TIMER_PWM2_GPIOx); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM2_GPIO_PIN_X1, TIMER_PWM2_GPIO_PIN_X1); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM2_GPIO_PIN_X2, TIMER_PWM2_GPIO_PIN_X2); - // - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM3_INSTANCE, (uint32_t)TIMER_PWM3_INSTANCE); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM3_TIM_CHANNEL1, TIMER_PWM3_TIM_CHANNEL1); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM3_TIM_CHANNEL2, TIMER_PWM3_TIM_CHANNEL2); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM3_GPIOx, (uint32_t)TIMER_PWM3_GPIOx); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM3_GPIO_PIN_X1, TIMER_PWM3_GPIO_PIN_X1); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_PWM3_GPIO_PIN_X2, TIMER_PWM3_GPIO_PIN_X2); - // - //// CTRL settings - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_CTRL_TICKBASE, TIMER_CTRL_TICKBASE); - //FLASH_WRITE_SETTING(PROJSET_MEM->TIM_CTRL_AHB_FREQ, TIMER_CTRL_AHB_FREQ); - //HAL_FLASH_Lock(); - -} - -void FillStructWithDefines(void) -{ - // rewrite all setting corresponding to defines - - - // MODBUS settings - STRUCT_WRITE_SETTING(PROJSET.MB_DEVICE_ID, MODBUS_DEVICE_ID); - STRUCT_WRITE_SETTING(PROJSET.MB_SPEED, MODBUS_SPEED); - STRUCT_WRITE_SETTING(PROJSET.MB_GPIOX, MODBUS_GPIOX); - STRUCT_WRITE_SETTING(PROJSET.MB_GPIO_PIN_RX, MODBUS_GPIO_PIN_RX); - STRUCT_WRITE_SETTING(PROJSET.MB_GPIO_PIN_TX, MODBUS_GPIO_PIN_TX); - STRUCT_WRITE_SETTING(PROJSET.MB_MAX_TIMEOUT, MODBUS_MAX_TIMEOUT); - STRUCT_WRITE_SETTING(PROJSET.MB_TIM_AHB_FREQ, MODBUS_TIM_AHB_FREQ); - - // PWM settings - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM_TICKBASE, TIMER_PWM_TICKBASE); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM_AHB_FREQ, TIMER_PWM_AHB_FREQ); - - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM1_TIM_CHANNEL1, TIMER_PWM1_TIM_CHANNEL1); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM1_TIM_CHANNEL2, TIMER_PWM1_TIM_CHANNEL2); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM1_GPIOx, TIMER_PWM1_GPIOx); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM1_GPIO_PIN_X1, TIMER_PWM1_GPIO_PIN_X1); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM1_GPIO_PIN_X2, TIMER_PWM1_GPIO_PIN_X2); - - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM2_INSTANCE, TIMER_PWM2_INSTANCE); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM2_TIM_CHANNEL1, TIMER_PWM2_TIM_CHANNEL1); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM2_TIM_CHANNEL2, TIMER_PWM2_TIM_CHANNEL2); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM2_GPIOx, TIMER_PWM2_GPIOx); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM2_GPIO_PIN_X1, TIMER_PWM2_GPIO_PIN_X1); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM2_GPIO_PIN_X2, TIMER_PWM2_GPIO_PIN_X2); - - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM3_INSTANCE, TIMER_PWM3_INSTANCE); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM3_TIM_CHANNEL1, TIMER_PWM3_TIM_CHANNEL1); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM3_TIM_CHANNEL2, TIMER_PWM3_TIM_CHANNEL2); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM3_GPIOx, TIMER_PWM3_GPIOx); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM3_GPIO_PIN_X1, TIMER_PWM3_GPIO_PIN_X1); - STRUCT_WRITE_SETTING(PROJSET.TIM_PWM3_GPIO_PIN_X2, TIMER_PWM3_GPIO_PIN_X2); - - // CTRL settings - STRUCT_WRITE_SETTING(PROJSET.TIM_CTRL_TICKBASE, TIMER_CTRL_TICKBASE); - STRUCT_WRITE_SETTING(PROJSET.TIM_CTRL_AHB_FREQ, TIMER_CTRL_AHB_FREQ); - -} -void CheckSettingsInFLASH(void) -{ - //if(CheckIsSettingsValid(PROJSET_MEM)) - // FillSettingsWithDefines(); - // - //PROJSET = *PROJSET_MEM; -} -int CheckIsSettingsValid(ProjectSettings_TypeDef *set_struct) -{ - // if some of setting are missing - // chech MODBUS - if((!IS_UART_BAUDRATE(set_struct->MB_SPEED) || (set_struct->MB_SPEED ) == 0) || - (!IS_GPIO_ALL_INSTANCE((GPIO_TypeDef *)set_struct->MB_GPIOX)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->MB_GPIO_PIN_TX)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->MB_GPIO_PIN_RX)) || - ((set_struct->MB_TIM_AHB_FREQ) == 0)) - { - return 1; - } - // chech control tim - if((set_struct->TIM_CTRL_AHB_FREQ) == 0) - { - return 1; - } - // chech PWM tims - if((set_struct->TIM_PWM_AHB_FREQ) == 0 || - (!IS_GPIO_ALL_INSTANCE((GPIO_TypeDef *)set_struct->TIM_PWM1_GPIOx)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->TIM_PWM1_GPIO_PIN_X1)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->TIM_PWM1_GPIO_PIN_X2)) || - (!IS_TIM_CHANNELS(set_struct->TIM_PWM1_TIM_CHANNEL1)) || - (!IS_TIM_CHANNELS(set_struct->TIM_PWM1_TIM_CHANNEL2)) || - (!IS_TIM_INSTANCE((TIM_TypeDef *)set_struct->TIM_PWM2_INSTANCE)) || - (!IS_GPIO_ALL_INSTANCE((GPIO_TypeDef *)set_struct->TIM_PWM2_GPIOx)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->TIM_PWM2_GPIO_PIN_X1)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->TIM_PWM2_GPIO_PIN_X2)) || - (!IS_TIM_CHANNELS(set_struct->TIM_PWM2_TIM_CHANNEL1)) || - (!IS_TIM_CHANNELS(set_struct->TIM_PWM2_TIM_CHANNEL2)) || - (!IS_TIM_INSTANCE((TIM_TypeDef *)set_struct->TIM_PWM3_INSTANCE)) || - (!IS_GPIO_ALL_INSTANCE((GPIO_TypeDef *)set_struct->TIM_PWM3_GPIOx)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->TIM_PWM3_GPIO_PIN_X1)) || - (!IS_GPIO_PIN((GPIO_TypeDef *)set_struct->TIM_PWM3_GPIO_PIN_X2)) || - (!IS_TIM_CHANNELS(set_struct->TIM_PWM3_TIM_CHANNEL1)) || - (!IS_TIM_CHANNELS(set_struct->TIM_PWM3_TIM_CHANNEL2))) - { - return 1; - } - - return 0; -} \ No newline at end of file diff --git a/Code/PWM/settings.h b/Code/PWM/settings.h deleted file mode 100644 index 3061544..0000000 --- a/Code/PWM/settings.h +++ /dev/null @@ -1,151 +0,0 @@ -/********************************MODBUS************************************* -Данный файл содержит объявления базовых функции и дефайны для реализации -MODBUS. -Данный файл необходимо подключить в rs_message.h. После подключать rs_message.h -к основному проекту. -***************************************************************************/ -#ifndef __PROJ_SETTINGS_H_ -#define __PROJ_SETTINGS_H_ - -#include "stm32f4xx_hal.h" -//--------DEFINES FOR SETTING OF SETTINGS----------- -#define SETTINGS_FLASH_ADDRESS_SHIFT (0x10000) -#define SETTINGS_FLASH_ADDRESS (FLASH_BASE + SETTINGS_FLASH_ADDRESS_SHIFT) - -#define EEPROM_BASE -#define SETTINGS_EEPROM_ADDRESS_SHIFT -#define SETTINGS_EEPROM_ADDRESS (EEPROM_BASE + SETTINGS_EEPROM_ADDRESS_SHIFT) - -#ifdef USE_EEPROM -#define SETTINGS_ADDRESS SETTINGS_EEPROM_ADDRESS -#else // USE_EEPROM -#define SETTINGS_ADDRESS (SETTINGS_FLASH_ADDRESS) -#endif // USE_EEPROM -//-------------------------------------------------- -//------------DEFINES FOR PWM SETTING--------------- -// settings defines -#define HZ_TIMER_CTRL 400 -#define HZ_TIMER_PWM 1000 - - -// TIM PWM1 SETTINGS -#define PWM_MASTER_TIM_NUMB 4 -#define TIMER_PWM_TICKBASE TIM_TickBase_1US -#define TIMER_PWM_AHB_FREQ 72 - -#define TIMER_PWM1_INSTANCE TIM4 -#define TIMER_PWM1_TIM_CHANNEL1 TIM_CHANNEL_1 -#define TIMER_PWM1_TIM_CHANNEL2 TIM_CHANNEL_2 -#define TIMER_PWM1_GPIOx GPIOD -#define TIMER_PWM1_GPIO_PIN_X1 GPIO_PIN_12 -#define TIMER_PWM1_GPIO_PIN_X2 GPIO_PIN_13 - - - -// TIM PWM2 SETTINGS -#define TIMER_PWM2_INSTANCE TIM3 -#define TIMER_PWM2_TIM_CHANNEL1 TIM_CHANNEL_3 -#define TIMER_PWM2_TIM_CHANNEL2 TIM_CHANNEL_4 -#define TIMER_PWM2_GPIOx GPIOB -#define TIMER_PWM2_GPIO_PIN_X1 GPIO_PIN_0 -#define TIMER_PWM2_GPIO_PIN_X2 GPIO_PIN_1 - - - -// TIM PWM3 SETTINGS -#define TIMER_PWM3_INSTANCE TIM1 -#define TIMER_PWM3_TIM_CHANNEL1 TIM_CHANNEL_1 -#define TIMER_PWM3_TIM_CHANNEL2 TIM_CHANNEL_2 -#define TIMER_PWM3_GPIOx GPIOE -#define TIMER_PWM3_GPIO_PIN_X1 GPIO_PIN_9 -#define TIMER_PWM3_GPIO_PIN_X2 GPIO_PIN_11 - -// TIM CTRL SETTINGS -#define TIMER_CTRL_TICKBASE TIM_TickBase_1US -#define TIMER_CTRL_AHB_FREQ 72 - -// PWM SETTINGS -#define SIN_TABLE_ORIGIN sin_table -#define SIN_TABLE_SIZE_MAX 1000 -//-------------------------------------------------- - -//----------DEFINES FOR MODBUS SETTING-------------- -#define MODBUS_UART_NUMB 3 // number of used uart -#define MODBUS_SPEED 115200 -#define MODBUS_GPIOX GPIOB -#define MODBUS_GPIO_PIN_RX GPIO_PIN_11 -#define MODBUS_GPIO_PIN_TX GPIO_PIN_10 -/* accord to this define sets define USED_MB_UART = USARTx */ -#define MODBUS_TIM_NUMB 7 // number of used uart -#define MODBUS_TIM_AHB_FREQ 72 -/* accord to this define sets define USED_MB_TIM = TIMx */ - -/* defines for modbus behaviour */ -#define MODBUS_DEVICE_ID 1 // number of used uart -#define MODBUS_MAX_TIMEOUT 5000 // is ms -// custom define for size of receive message -//-------------------------------------------------- - -typedef struct -{ - // ctrl periph settings - uint64_t TIM_CTRL_TICKBASE; - uint64_t TIM_CTRL_AHB_FREQ; - // pwm peripth settings - uint64_t TIM_PWM_TICKBASE; - uint64_t TIM_PWM_AHB_FREQ; - -// uint64_t TIM_PWM1_INSTANCE; - uint64_t TIM_PWM1_TIM_CHANNEL1; - uint64_t TIM_PWM1_TIM_CHANNEL2; - uint64_t TIM_PWM1_GPIOx; - uint64_t TIM_PWM1_GPIO_PIN_X1; - uint64_t TIM_PWM1_GPIO_PIN_X2; - - uint64_t TIM_PWM2_INSTANCE; - uint64_t TIM_PWM2_TIM_CHANNEL1; - uint64_t TIM_PWM2_TIM_CHANNEL2; - uint64_t TIM_PWM2_GPIOx; - uint64_t TIM_PWM2_GPIO_PIN_X1; - uint64_t TIM_PWM2_GPIO_PIN_X2; - - uint64_t TIM_PWM3_INSTANCE; - uint64_t TIM_PWM3_TIM_CHANNEL1; - uint64_t TIM_PWM3_TIM_CHANNEL2; - uint64_t TIM_PWM3_GPIOx; - uint64_t TIM_PWM3_GPIO_PIN_X1; - uint64_t TIM_PWM3_GPIO_PIN_X2; - - - // modbus peripth settings - uint64_t MB_DEVICE_ID; - uint64_t MB_SPEED; - uint64_t MB_GPIOX; - uint64_t MB_GPIO_PIN_RX; - uint64_t MB_GPIO_PIN_TX; - uint64_t MB_MAX_TIMEOUT; - uint64_t MB_TIM_AHB_FREQ; - -// uint32_t MB_UART_NUMB; -// uint32_t MB_TIM_NUMB; -}ProjectSettings_TypeDef; -extern ProjectSettings_TypeDef PROJSET; - -//#define PROJSET_MEM ((ProjectSettings_TypeDef *)SETTINGS_ADDRESS) - - -//#define HAL_FLASH_GET_TYPEPROGRAM(_val_) (sizeof(PROJSET_MEM->MB_DEVICE_ID)/2 - 1) -#define HAL_FLASH_GET_TYPEPROGRAM(_val_) FLASH_TYPEPROGRAM_WORD -#define FLASH_WRITE_SETTING(_setting_, _val_) HAL_FLASH_Program(HAL_FLASH_GET_TYPEPROGRAM(_setting_), (uint32_t)(&_setting_), (uint32_t)_val_); -#define STRUCT_WRITE_SETTING(_setting_, _val_) (_setting_ = _val_) - - -void FillStructWithDefines(void); -void SetFlagUpdateSettingsInMem(void); -void UpdateSettingsInMem(void); -void WriteSettingsToMem(void); -void FillSettingsWithDefines(void); -void CheckSettingsInFLASH(void); -int CheckIsSettingsValid(ProjectSettings_TypeDef *set_struct); - -#endif // __PROJ_SETTINGS_H_ \ No newline at end of file diff --git a/MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f100xb_matlab.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f100xb_matlab.h new file mode 100644 index 0000000..e98e4c4 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f100xb_matlab.h @@ -0,0 +1,5974 @@ +/** + ****************************************************************************** + * @file stm32f100xb.h + * @author MCD Application Team + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F1xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripherals registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f100xb + * @{ + */ + +#ifndef __STM32F100xB_H +#define __STM32F100xB_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; + __IO uint32_t SR; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + + uint32_t RESERVED0; + __IO uint32_t CFGR2; +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0801FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define CEC_BASE (APB1PERIPH_BASE + 0x00007800UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x00004000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define CEC ((CEC_TypeDef *)CEC_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define TIM15 ((TIM_TypeDef *)TIM15_BASE) +#define TIM16 ((TIM_TypeDef *)TIM16_BASE) +#define TIM17 ((TIM_TypeDef *)TIM17_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_PREDIV1 0x00000000U /*!< PREDIV1 clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_PREDIV1_DIV2 0x00020000U /*!< PREDIV1 clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + +#define RCC_APB2RSTR_TIM15RST_Pos (16U) +#define RCC_APB2RSTR_TIM15RST_Msk (0x1UL << RCC_APB2RSTR_TIM15RST_Pos) /*!< 0x00010000 */ +#define RCC_APB2RSTR_TIM15RST RCC_APB2RSTR_TIM15RST_Msk /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST_Pos (17U) +#define RCC_APB2RSTR_TIM16RST_Msk (0x1UL << RCC_APB2RSTR_TIM16RST_Pos) /*!< 0x00020000 */ +#define RCC_APB2RSTR_TIM16RST RCC_APB2RSTR_TIM16RST_Msk /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST_Pos (18U) +#define RCC_APB2RSTR_TIM17RST_Msk (0x1UL << RCC_APB2RSTR_TIM17RST_Pos) /*!< 0x00040000 */ +#define RCC_APB2RSTR_TIM17RST RCC_APB2RSTR_TIM17RST_Msk /*!< TIM17 Timer reset */ + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + + +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_CECRST_Pos (30U) +#define RCC_APB1RSTR_CECRST_Msk (0x1UL << RCC_APB1RSTR_CECRST_Pos) /*!< 0x40000000 */ +#define RCC_APB1RSTR_CECRST RCC_APB1RSTR_CECRST_Msk /*!< CEC interface reset */ + + + +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + +#define RCC_APB2ENR_TIM15EN_Pos (16U) +#define RCC_APB2ENR_TIM15EN_Msk (0x1UL << RCC_APB2ENR_TIM15EN_Pos) /*!< 0x00010000 */ +#define RCC_APB2ENR_TIM15EN RCC_APB2ENR_TIM15EN_Msk /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN_Pos (17U) +#define RCC_APB2ENR_TIM16EN_Msk (0x1UL << RCC_APB2ENR_TIM16EN_Pos) /*!< 0x00020000 */ +#define RCC_APB2ENR_TIM16EN RCC_APB2ENR_TIM16EN_Msk /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN_Pos (18U) +#define RCC_APB2ENR_TIM17EN_Msk (0x1UL << RCC_APB2ENR_TIM17EN_Pos) /*!< 0x00040000 */ +#define RCC_APB2ENR_TIM17EN RCC_APB2ENR_TIM17EN_Msk /*!< TIM17 Timer clock enable */ + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + + +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_CECEN_Pos (30U) +#define RCC_APB1ENR_CECEN_Msk (0x1UL << RCC_APB1ENR_CECEN_Pos) /*!< 0x40000000 */ +#define RCC_APB1ENR_CECEN RCC_APB1ENR_CECEN_Msk /*!< CEC interface clock enable */ + + + +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ +#define RCC_CFGR2_PREDIV1_Pos (0U) +#define RCC_CFGR2_PREDIV1_Msk (0xFUL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1 RCC_CFGR2_PREDIV1_Msk /*!< PREDIV1[3:0] bits */ +#define RCC_CFGR2_PREDIV1_0 (0x1UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_1 (0x2UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_2 (0x4UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_3 (0x8UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR2_PREDIV1_DIV1 0x00000000U /*!< PREDIV1 input clock not divided */ +#define RCC_CFGR2_PREDIV1_DIV2_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV2_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV2_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_DIV2 RCC_CFGR2_PREDIV1_DIV2_Msk /*!< PREDIV1 input clock divided by 2 */ +#define RCC_CFGR2_PREDIV1_DIV3_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV3_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV3_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_DIV3 RCC_CFGR2_PREDIV1_DIV3_Msk /*!< PREDIV1 input clock divided by 3 */ +#define RCC_CFGR2_PREDIV1_DIV4_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV4_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV4_Pos) /*!< 0x00000003 */ +#define RCC_CFGR2_PREDIV1_DIV4 RCC_CFGR2_PREDIV1_DIV4_Msk /*!< PREDIV1 input clock divided by 4 */ +#define RCC_CFGR2_PREDIV1_DIV5_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV5_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV5_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_DIV5 RCC_CFGR2_PREDIV1_DIV5_Msk /*!< PREDIV1 input clock divided by 5 */ +#define RCC_CFGR2_PREDIV1_DIV6_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV6_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV6_Pos) /*!< 0x00000005 */ +#define RCC_CFGR2_PREDIV1_DIV6 RCC_CFGR2_PREDIV1_DIV6_Msk /*!< PREDIV1 input clock divided by 6 */ +#define RCC_CFGR2_PREDIV1_DIV7_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV7_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV7_Pos) /*!< 0x00000006 */ +#define RCC_CFGR2_PREDIV1_DIV7 RCC_CFGR2_PREDIV1_DIV7_Msk /*!< PREDIV1 input clock divided by 7 */ +#define RCC_CFGR2_PREDIV1_DIV8_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV8_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV8_Pos) /*!< 0x00000007 */ +#define RCC_CFGR2_PREDIV1_DIV8 RCC_CFGR2_PREDIV1_DIV8_Msk /*!< PREDIV1 input clock divided by 8 */ +#define RCC_CFGR2_PREDIV1_DIV9_Pos (3U) +#define RCC_CFGR2_PREDIV1_DIV9_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV9_Pos) /*!< 0x00000008 */ +#define RCC_CFGR2_PREDIV1_DIV9 RCC_CFGR2_PREDIV1_DIV9_Msk /*!< PREDIV1 input clock divided by 9 */ +#define RCC_CFGR2_PREDIV1_DIV10_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV10_Msk (0x9UL << RCC_CFGR2_PREDIV1_DIV10_Pos) /*!< 0x00000009 */ +#define RCC_CFGR2_PREDIV1_DIV10 RCC_CFGR2_PREDIV1_DIV10_Msk /*!< PREDIV1 input clock divided by 10 */ +#define RCC_CFGR2_PREDIV1_DIV11_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV11_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV11_Pos) /*!< 0x0000000A */ +#define RCC_CFGR2_PREDIV1_DIV11 RCC_CFGR2_PREDIV1_DIV11_Msk /*!< PREDIV1 input clock divided by 11 */ +#define RCC_CFGR2_PREDIV1_DIV12_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV12_Msk (0xBUL << RCC_CFGR2_PREDIV1_DIV12_Pos) /*!< 0x0000000B */ +#define RCC_CFGR2_PREDIV1_DIV12 RCC_CFGR2_PREDIV1_DIV12_Msk /*!< PREDIV1 input clock divided by 12 */ +#define RCC_CFGR2_PREDIV1_DIV13_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV13_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV13_Pos) /*!< 0x0000000C */ +#define RCC_CFGR2_PREDIV1_DIV13 RCC_CFGR2_PREDIV1_DIV13_Msk /*!< PREDIV1 input clock divided by 13 */ +#define RCC_CFGR2_PREDIV1_DIV14_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV14_Msk (0xDUL << RCC_CFGR2_PREDIV1_DIV14_Pos) /*!< 0x0000000D */ +#define RCC_CFGR2_PREDIV1_DIV14 RCC_CFGR2_PREDIV1_DIV14_Msk /*!< PREDIV1 input clock divided by 14 */ +#define RCC_CFGR2_PREDIV1_DIV15_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV15_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV15_Pos) /*!< 0x0000000E */ +#define RCC_CFGR2_PREDIV1_DIV15 RCC_CFGR2_PREDIV1_DIV15_Msk /*!< PREDIV1 input clock divided by 15 */ +#define RCC_CFGR2_PREDIV1_DIV16_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV16_Msk (0xFUL << RCC_CFGR2_PREDIV1_DIV16_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1_DIV16 RCC_CFGR2_PREDIV1_DIV16_Msk /*!< PREDIV1 input clock divided by 16 */ + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP_Pos (0U) +#define AFIO_MAPR2_TIM15_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM15_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR2_TIM15_REMAP AFIO_MAPR2_TIM15_REMAP_Msk /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP_Pos (1U) +#define AFIO_MAPR2_TIM16_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM16_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR2_TIM16_REMAP AFIO_MAPR2_TIM16_REMAP_Msk /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP_Pos (2U) +#define AFIO_MAPR2_TIM17_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM17_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR2_TIM17_REMAP AFIO_MAPR2_TIM17_REMAP_Msk /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP_Pos (3U) +#define AFIO_MAPR2_CEC_REMAP_Msk (0x1UL << AFIO_MAPR2_CEC_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR2_CEC_REMAP AFIO_MAPR2_CEC_REMAP_Msk /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP_Pos (4U) +#define AFIO_MAPR2_TIM1_DMA_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM1_DMA_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR2_TIM1_DMA_REMAP AFIO_MAPR2_TIM1_DMA_REMAP_Msk /*!< TIM1_DMA remapping */ + +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Pos (11U) +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Msk /*!< TIM6/TIM7 and DAC DMA remapping */ + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM 0x0003FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + +#define DAC_CR_DMAUDRIE1_Pos (13U) +#define DAC_CR_DMAUDRIE1_Msk (0x1UL << DAC_CR_DMAUDRIE1_Pos) /*!< 0x00002000 */ +#define DAC_CR_DMAUDRIE1 DAC_CR_DMAUDRIE1_Msk /*!< DAC channel1 DMA underrun interrupt enable */ +#define DAC_CR_DMAUDRIE2_Pos (29U) +#define DAC_CR_DMAUDRIE2_Msk (0x1UL << DAC_CR_DMAUDRIE2_Pos) /*!< 0x20000000 */ +#define DAC_CR_DMAUDRIE2 DAC_CR_DMAUDRIE2_Msk /*!< DAC channel2 DMA underrun interrupt enable */ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1_Pos (13U) +#define DAC_SR_DMAUDR1_Msk (0x1UL << DAC_SR_DMAUDR1_Pos) /*!< 0x00002000 */ +#define DAC_SR_DMAUDR1 DAC_SR_DMAUDR1_Msk /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2_Pos (29U) +#define DAC_SR_DMAUDR2_Msk (0x1UL << DAC_SR_DMAUDR2_Pos) /*!< 0x20000000 */ +#define DAC_SR_DMAUDR2 DAC_SR_DMAUDR2_Msk /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE_Pos (0U) +#define CEC_CFGR_PE_Msk (0x1UL << CEC_CFGR_PE_Pos) /*!< 0x00000001 */ +#define CEC_CFGR_PE CEC_CFGR_PE_Msk /*!< Peripheral Enable */ +#define CEC_CFGR_IE_Pos (1U) +#define CEC_CFGR_IE_Msk (0x1UL << CEC_CFGR_IE_Pos) /*!< 0x00000002 */ +#define CEC_CFGR_IE CEC_CFGR_IE_Msk /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM_Pos (2U) +#define CEC_CFGR_BTEM_Msk (0x1UL << CEC_CFGR_BTEM_Pos) /*!< 0x00000004 */ +#define CEC_CFGR_BTEM CEC_CFGR_BTEM_Msk /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM_Pos (3U) +#define CEC_CFGR_BPEM_Msk (0x1UL << CEC_CFGR_BPEM_Pos) /*!< 0x00000008 */ +#define CEC_CFGR_BPEM CEC_CFGR_BPEM_Msk /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA_Pos (0U) +#define CEC_OAR_OA_Msk (0xFUL << CEC_OAR_OA_Pos) /*!< 0x0000000F */ +#define CEC_OAR_OA CEC_OAR_OA_Msk /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 (0x1UL << CEC_OAR_OA_Pos) /*!< 0x00000001 */ +#define CEC_OAR_OA_1 (0x2UL << CEC_OAR_OA_Pos) /*!< 0x00000002 */ +#define CEC_OAR_OA_2 (0x4UL << CEC_OAR_OA_Pos) /*!< 0x00000004 */ +#define CEC_OAR_OA_3 (0x8UL << CEC_OAR_OA_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES_Pos (0U) +#define CEC_PRES_PRES_Msk (0x3FFFUL << CEC_PRES_PRES_Pos) /*!< 0x00003FFF */ +#define CEC_PRES_PRES CEC_PRES_PRES_Msk /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE_Pos (0U) +#define CEC_ESR_BTE_Msk (0x1UL << CEC_ESR_BTE_Pos) /*!< 0x00000001 */ +#define CEC_ESR_BTE CEC_ESR_BTE_Msk /*!< Bit Timing Error */ +#define CEC_ESR_BPE_Pos (1U) +#define CEC_ESR_BPE_Msk (0x1UL << CEC_ESR_BPE_Pos) /*!< 0x00000002 */ +#define CEC_ESR_BPE CEC_ESR_BPE_Msk /*!< Bit Period Error */ +#define CEC_ESR_RBTFE_Pos (2U) +#define CEC_ESR_RBTFE_Msk (0x1UL << CEC_ESR_RBTFE_Pos) /*!< 0x00000004 */ +#define CEC_ESR_RBTFE CEC_ESR_RBTFE_Msk /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE_Pos (3U) +#define CEC_ESR_SBE_Msk (0x1UL << CEC_ESR_SBE_Pos) /*!< 0x00000008 */ +#define CEC_ESR_SBE CEC_ESR_SBE_Msk /*!< Start Bit Error */ +#define CEC_ESR_ACKE_Pos (4U) +#define CEC_ESR_ACKE_Msk (0x1UL << CEC_ESR_ACKE_Pos) /*!< 0x00000010 */ +#define CEC_ESR_ACKE CEC_ESR_ACKE_Msk /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE_Pos (5U) +#define CEC_ESR_LINE_Msk (0x1UL << CEC_ESR_LINE_Pos) /*!< 0x00000020 */ +#define CEC_ESR_LINE CEC_ESR_LINE_Msk /*!< Line Error */ +#define CEC_ESR_TBTFE_Pos (6U) +#define CEC_ESR_TBTFE_Msk (0x1UL << CEC_ESR_TBTFE_Pos) /*!< 0x00000040 */ +#define CEC_ESR_TBTFE CEC_ESR_TBTFE_Msk /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM_Pos (0U) +#define CEC_CSR_TSOM_Msk (0x1UL << CEC_CSR_TSOM_Pos) /*!< 0x00000001 */ +#define CEC_CSR_TSOM CEC_CSR_TSOM_Msk /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM_Pos (1U) +#define CEC_CSR_TEOM_Msk (0x1UL << CEC_CSR_TEOM_Pos) /*!< 0x00000002 */ +#define CEC_CSR_TEOM CEC_CSR_TEOM_Msk /*!< Tx End Of Message */ +#define CEC_CSR_TERR_Pos (2U) +#define CEC_CSR_TERR_Msk (0x1UL << CEC_CSR_TERR_Pos) /*!< 0x00000004 */ +#define CEC_CSR_TERR CEC_CSR_TERR_Msk /*!< Tx Error */ +#define CEC_CSR_TBTRF_Pos (3U) +#define CEC_CSR_TBTRF_Msk (0x1UL << CEC_CSR_TBTRF_Pos) /*!< 0x00000008 */ +#define CEC_CSR_TBTRF CEC_CSR_TBTRF_Msk /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM_Pos (4U) +#define CEC_CSR_RSOM_Msk (0x1UL << CEC_CSR_RSOM_Pos) /*!< 0x00000010 */ +#define CEC_CSR_RSOM CEC_CSR_RSOM_Msk /*!< Rx Start Of Message */ +#define CEC_CSR_REOM_Pos (5U) +#define CEC_CSR_REOM_Msk (0x1UL << CEC_CSR_REOM_Pos) /*!< 0x00000020 */ +#define CEC_CSR_REOM CEC_CSR_REOM_Msk /*!< Rx End Of Message */ +#define CEC_CSR_RERR_Pos (6U) +#define CEC_CSR_RERR_Msk (0x1UL << CEC_CSR_RERR_Pos) /*!< 0x00000040 */ +#define CEC_CSR_RERR CEC_CSR_RERR_Msk /*!< Rx Error */ +#define CEC_CSR_RBTF_Pos (7U) +#define CEC_CSR_RBTF_Msk (0x1UL << CEC_CSR_RBTF_Pos) /*!< 0x00000080 */ +#define CEC_CSR_RBTF CEC_CSR_RBTF_Msk /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD_Pos (0U) +#define CEC_TXD_TXD_Msk (0xFFUL << CEC_TXD_TXD_Pos) /*!< 0x000000FF */ +#define CEC_TXD_TXD CEC_TXD_TXD_Msk /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD_Pos (0U) +#define CEC_RXD_RXD_Msk (0xFFUL << CEC_RXD_RXD_Pos) /*!< 0x000000FF */ +#define CEC_RXD_RXD CEC_RXD_RXD_Msk /*!< Rx Data register */ + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f100xe + * @{ + */ + +#ifndef __STM32F100xE_H +#define __STM32F100xE_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is + mapped at position 60 only if the MISC_REMAP bit in + the AFIO_MAPR2 register is set) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; + __IO uint32_t SR; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + + uint32_t RESERVED0; + __IO uint32_t CFGR2; +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0807FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + +#define FSMC_BASE 0x60000000UL /*!< FSMC base address */ +#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x00001800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x00001C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define CEC_BASE (APB1PERIPH_BASE + 0x00007800UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x00001C00UL) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x00002000UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x00004000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + +#define FSMC_BANK1 (FSMC_BASE) /*!< FSMC Bank1 base address */ +#define FSMC_BANK1_1 (FSMC_BANK1) /*!< FSMC Bank1_1 base address */ +#define FSMC_BANK1_2 (FSMC_BANK1 + 0x04000000UL) /*!< FSMC Bank1_2 base address */ +#define FSMC_BANK1_3 (FSMC_BANK1 + 0x08000000UL) /*!< FSMC Bank1_3 base address */ +#define FSMC_BANK1_4 (FSMC_BANK1 + 0x0C000000UL) /*!< FSMC Bank1_4 base address */ + + +#define FSMC_BANK1_R_BASE (FSMC_R_BASE + 0x00000000UL) /*!< FSMC Bank1 registers base address */ +#define FSMC_BANK1E_R_BASE (FSMC_R_BASE + 0x00000104UL) /*!< FSMC Bank1E registers base address */ + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define TIM12 ((TIM_TypeDef *)TIM12_BASE) +#define TIM13 ((TIM_TypeDef *)TIM13_BASE) +#define TIM14 ((TIM_TypeDef *)TIM14_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define CEC ((CEC_TypeDef *)CEC_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *)GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *)GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define TIM15 ((TIM_TypeDef *)TIM15_BASE) +#define TIM16 ((TIM_TypeDef *)TIM16_BASE) +#define TIM17 ((TIM_TypeDef *)TIM17_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *)FSMC_BANK1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *)FSMC_BANK1E_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_PREDIV1 0x00000000U /*!< PREDIV1 clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_PREDIV1_DIV2 0x00020000U /*!< PREDIV1 clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + +#define RCC_APB2RSTR_TIM15RST_Pos (16U) +#define RCC_APB2RSTR_TIM15RST_Msk (0x1UL << RCC_APB2RSTR_TIM15RST_Pos) /*!< 0x00010000 */ +#define RCC_APB2RSTR_TIM15RST RCC_APB2RSTR_TIM15RST_Msk /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST_Pos (17U) +#define RCC_APB2RSTR_TIM16RST_Msk (0x1UL << RCC_APB2RSTR_TIM16RST_Pos) /*!< 0x00020000 */ +#define RCC_APB2RSTR_TIM16RST RCC_APB2RSTR_TIM16RST_Msk /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST_Pos (18U) +#define RCC_APB2RSTR_TIM17RST_Msk (0x1UL << RCC_APB2RSTR_TIM17RST_Pos) /*!< 0x00040000 */ +#define RCC_APB2RSTR_TIM17RST RCC_APB2RSTR_TIM17RST_Msk /*!< TIM17 Timer reset */ + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + +#define RCC_APB2RSTR_IOPFRST_Pos (7U) +#define RCC_APB2RSTR_IOPFRST_Msk (0x1UL << RCC_APB2RSTR_IOPFRST_Pos) /*!< 0x00000080 */ +#define RCC_APB2RSTR_IOPFRST RCC_APB2RSTR_IOPFRST_Msk /*!< I/O port F reset */ +#define RCC_APB2RSTR_IOPGRST_Pos (8U) +#define RCC_APB2RSTR_IOPGRST_Msk (0x1UL << RCC_APB2RSTR_IOPGRST_Pos) /*!< 0x00000100 */ +#define RCC_APB2RSTR_IOPGRST RCC_APB2RSTR_IOPGRST_Msk /*!< I/O port G reset */ + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + + +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_CECRST_Pos (30U) +#define RCC_APB1RSTR_CECRST_Msk (0x1UL << RCC_APB1RSTR_CECRST_Pos) /*!< 0x40000000 */ +#define RCC_APB1RSTR_CECRST RCC_APB1RSTR_CECRST_Msk /*!< CEC interface reset */ + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM12RST_Pos (6U) +#define RCC_APB1RSTR_TIM12RST_Msk (0x1UL << RCC_APB1RSTR_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR_TIM12RST RCC_APB1RSTR_TIM12RST_Msk /*!< TIM12 Timer reset */ +#define RCC_APB1RSTR_TIM13RST_Pos (7U) +#define RCC_APB1RSTR_TIM13RST_Msk (0x1UL << RCC_APB1RSTR_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR_TIM13RST RCC_APB1RSTR_TIM13RST_Msk /*!< TIM13 Timer reset */ +#define RCC_APB1RSTR_TIM14RST_Pos (8U) +#define RCC_APB1RSTR_TIM14RST_Msk (0x1UL << RCC_APB1RSTR_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR_TIM14RST RCC_APB1RSTR_TIM14RST_Msk /*!< TIM14 Timer reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + +#define RCC_AHBENR_FSMCEN_Pos (8U) +#define RCC_AHBENR_FSMCEN_Msk (0x1UL << RCC_AHBENR_FSMCEN_Pos) /*!< 0x00000100 */ +#define RCC_AHBENR_FSMCEN RCC_AHBENR_FSMCEN_Msk /*!< FSMC clock enable */ + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + +#define RCC_APB2ENR_TIM15EN_Pos (16U) +#define RCC_APB2ENR_TIM15EN_Msk (0x1UL << RCC_APB2ENR_TIM15EN_Pos) /*!< 0x00010000 */ +#define RCC_APB2ENR_TIM15EN RCC_APB2ENR_TIM15EN_Msk /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN_Pos (17U) +#define RCC_APB2ENR_TIM16EN_Msk (0x1UL << RCC_APB2ENR_TIM16EN_Pos) /*!< 0x00020000 */ +#define RCC_APB2ENR_TIM16EN RCC_APB2ENR_TIM16EN_Msk /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN_Pos (18U) +#define RCC_APB2ENR_TIM17EN_Msk (0x1UL << RCC_APB2ENR_TIM17EN_Pos) /*!< 0x00040000 */ +#define RCC_APB2ENR_TIM17EN RCC_APB2ENR_TIM17EN_Msk /*!< TIM17 Timer clock enable */ + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + +#define RCC_APB2ENR_IOPFEN_Pos (7U) +#define RCC_APB2ENR_IOPFEN_Msk (0x1UL << RCC_APB2ENR_IOPFEN_Pos) /*!< 0x00000080 */ +#define RCC_APB2ENR_IOPFEN RCC_APB2ENR_IOPFEN_Msk /*!< I/O port F clock enable */ +#define RCC_APB2ENR_IOPGEN_Pos (8U) +#define RCC_APB2ENR_IOPGEN_Msk (0x1UL << RCC_APB2ENR_IOPGEN_Pos) /*!< 0x00000100 */ +#define RCC_APB2ENR_IOPGEN RCC_APB2ENR_IOPGEN_Msk /*!< I/O port G clock enable */ + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + + +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_CECEN_Pos (30U) +#define RCC_APB1ENR_CECEN_Msk (0x1UL << RCC_APB1ENR_CECEN_Pos) /*!< 0x40000000 */ +#define RCC_APB1ENR_CECEN RCC_APB1ENR_CECEN_Msk /*!< CEC interface clock enable */ + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM12EN_Pos (6U) +#define RCC_APB1ENR_TIM12EN_Msk (0x1UL << RCC_APB1ENR_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR_TIM12EN RCC_APB1ENR_TIM12EN_Msk /*!< TIM12 Timer clock enable */ +#define RCC_APB1ENR_TIM13EN_Pos (7U) +#define RCC_APB1ENR_TIM13EN_Msk (0x1UL << RCC_APB1ENR_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR_TIM13EN RCC_APB1ENR_TIM13EN_Msk /*!< TIM13 Timer clock enable */ +#define RCC_APB1ENR_TIM14EN_Pos (8U) +#define RCC_APB1ENR_TIM14EN_Msk (0x1UL << RCC_APB1ENR_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR_TIM14EN RCC_APB1ENR_TIM14EN_Msk /*!< TIM14 Timer clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ +#define RCC_CFGR2_PREDIV1_Pos (0U) +#define RCC_CFGR2_PREDIV1_Msk (0xFUL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1 RCC_CFGR2_PREDIV1_Msk /*!< PREDIV1[3:0] bits */ +#define RCC_CFGR2_PREDIV1_0 (0x1UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_1 (0x2UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_2 (0x4UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_3 (0x8UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR2_PREDIV1_DIV1 0x00000000U /*!< PREDIV1 input clock not divided */ +#define RCC_CFGR2_PREDIV1_DIV2_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV2_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV2_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_DIV2 RCC_CFGR2_PREDIV1_DIV2_Msk /*!< PREDIV1 input clock divided by 2 */ +#define RCC_CFGR2_PREDIV1_DIV3_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV3_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV3_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_DIV3 RCC_CFGR2_PREDIV1_DIV3_Msk /*!< PREDIV1 input clock divided by 3 */ +#define RCC_CFGR2_PREDIV1_DIV4_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV4_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV4_Pos) /*!< 0x00000003 */ +#define RCC_CFGR2_PREDIV1_DIV4 RCC_CFGR2_PREDIV1_DIV4_Msk /*!< PREDIV1 input clock divided by 4 */ +#define RCC_CFGR2_PREDIV1_DIV5_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV5_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV5_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_DIV5 RCC_CFGR2_PREDIV1_DIV5_Msk /*!< PREDIV1 input clock divided by 5 */ +#define RCC_CFGR2_PREDIV1_DIV6_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV6_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV6_Pos) /*!< 0x00000005 */ +#define RCC_CFGR2_PREDIV1_DIV6 RCC_CFGR2_PREDIV1_DIV6_Msk /*!< PREDIV1 input clock divided by 6 */ +#define RCC_CFGR2_PREDIV1_DIV7_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV7_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV7_Pos) /*!< 0x00000006 */ +#define RCC_CFGR2_PREDIV1_DIV7 RCC_CFGR2_PREDIV1_DIV7_Msk /*!< PREDIV1 input clock divided by 7 */ +#define RCC_CFGR2_PREDIV1_DIV8_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV8_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV8_Pos) /*!< 0x00000007 */ +#define RCC_CFGR2_PREDIV1_DIV8 RCC_CFGR2_PREDIV1_DIV8_Msk /*!< PREDIV1 input clock divided by 8 */ +#define RCC_CFGR2_PREDIV1_DIV9_Pos (3U) +#define RCC_CFGR2_PREDIV1_DIV9_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV9_Pos) /*!< 0x00000008 */ +#define RCC_CFGR2_PREDIV1_DIV9 RCC_CFGR2_PREDIV1_DIV9_Msk /*!< PREDIV1 input clock divided by 9 */ +#define RCC_CFGR2_PREDIV1_DIV10_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV10_Msk (0x9UL << RCC_CFGR2_PREDIV1_DIV10_Pos) /*!< 0x00000009 */ +#define RCC_CFGR2_PREDIV1_DIV10 RCC_CFGR2_PREDIV1_DIV10_Msk /*!< PREDIV1 input clock divided by 10 */ +#define RCC_CFGR2_PREDIV1_DIV11_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV11_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV11_Pos) /*!< 0x0000000A */ +#define RCC_CFGR2_PREDIV1_DIV11 RCC_CFGR2_PREDIV1_DIV11_Msk /*!< PREDIV1 input clock divided by 11 */ +#define RCC_CFGR2_PREDIV1_DIV12_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV12_Msk (0xBUL << RCC_CFGR2_PREDIV1_DIV12_Pos) /*!< 0x0000000B */ +#define RCC_CFGR2_PREDIV1_DIV12 RCC_CFGR2_PREDIV1_DIV12_Msk /*!< PREDIV1 input clock divided by 12 */ +#define RCC_CFGR2_PREDIV1_DIV13_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV13_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV13_Pos) /*!< 0x0000000C */ +#define RCC_CFGR2_PREDIV1_DIV13 RCC_CFGR2_PREDIV1_DIV13_Msk /*!< PREDIV1 input clock divided by 13 */ +#define RCC_CFGR2_PREDIV1_DIV14_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV14_Msk (0xDUL << RCC_CFGR2_PREDIV1_DIV14_Pos) /*!< 0x0000000D */ +#define RCC_CFGR2_PREDIV1_DIV14 RCC_CFGR2_PREDIV1_DIV14_Msk /*!< PREDIV1 input clock divided by 14 */ +#define RCC_CFGR2_PREDIV1_DIV15_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV15_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV15_Pos) /*!< 0x0000000E */ +#define RCC_CFGR2_PREDIV1_DIV15 RCC_CFGR2_PREDIV1_DIV15_Msk /*!< PREDIV1 input clock divided by 15 */ +#define RCC_CFGR2_PREDIV1_DIV16_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV16_Msk (0xFUL << RCC_CFGR2_PREDIV1_DIV16_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1_DIV16 RCC_CFGR2_PREDIV1_DIV16_Msk /*!< PREDIV1 input clock divided by 16 */ + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP_Pos (0U) +#define AFIO_MAPR2_TIM15_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM15_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR2_TIM15_REMAP AFIO_MAPR2_TIM15_REMAP_Msk /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP_Pos (1U) +#define AFIO_MAPR2_TIM16_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM16_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR2_TIM16_REMAP AFIO_MAPR2_TIM16_REMAP_Msk /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP_Pos (2U) +#define AFIO_MAPR2_TIM17_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM17_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR2_TIM17_REMAP AFIO_MAPR2_TIM17_REMAP_Msk /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP_Pos (3U) +#define AFIO_MAPR2_CEC_REMAP_Msk (0x1UL << AFIO_MAPR2_CEC_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR2_CEC_REMAP AFIO_MAPR2_CEC_REMAP_Msk /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP_Pos (4U) +#define AFIO_MAPR2_TIM1_DMA_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM1_DMA_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR2_TIM1_DMA_REMAP AFIO_MAPR2_TIM1_DMA_REMAP_Msk /*!< TIM1_DMA remapping */ + +#define AFIO_MAPR2_TIM13_REMAP_Pos (8U) +#define AFIO_MAPR2_TIM13_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM13_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR2_TIM13_REMAP AFIO_MAPR2_TIM13_REMAP_Msk /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP_Pos (9U) +#define AFIO_MAPR2_TIM14_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM14_REMAP_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR2_TIM14_REMAP AFIO_MAPR2_TIM14_REMAP_Msk /*!< TIM14 remapping */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Pos (11U) +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP AFIO_MAPR2_TIM67_DAC_DMA_REMAP_Msk /*!< TIM6/TIM7 and DAC DMA remapping */ +#define AFIO_MAPR2_TIM12_REMAP_Pos (12U) +#define AFIO_MAPR2_TIM12_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM12_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR2_TIM12_REMAP AFIO_MAPR2_TIM12_REMAP_Msk /*!< TIM12 remapping */ +#define AFIO_MAPR2_MISC_REMAP_Pos (13U) +#define AFIO_MAPR2_MISC_REMAP_Msk (0x1UL << AFIO_MAPR2_MISC_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR2_MISC_REMAP AFIO_MAPR2_MISC_REMAP_Msk /*!< Miscellaneous remapping */ + +#define AFIO_MAPR2_FSMC_NADV_REMAP_Pos (10U) +#define AFIO_MAPR2_FSMC_NADV_REMAP_Msk (0x1UL << AFIO_MAPR2_FSMC_NADV_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR2_FSMC_NADV_REMAP AFIO_MAPR2_FSMC_NADV_REMAP_Msk /*!< FSMC NADV remapping */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM 0x0003FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + +#define DAC_CR_DMAUDRIE1_Pos (13U) +#define DAC_CR_DMAUDRIE1_Msk (0x1UL << DAC_CR_DMAUDRIE1_Pos) /*!< 0x00002000 */ +#define DAC_CR_DMAUDRIE1 DAC_CR_DMAUDRIE1_Msk /*!< DAC channel1 DMA underrun interrupt enable */ +#define DAC_CR_DMAUDRIE2_Pos (29U) +#define DAC_CR_DMAUDRIE2_Msk (0x1UL << DAC_CR_DMAUDRIE2_Pos) /*!< 0x20000000 */ +#define DAC_CR_DMAUDRIE2 DAC_CR_DMAUDRIE2_Msk /*!< DAC channel2 DMA underrun interrupt enable */ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1_Pos (13U) +#define DAC_SR_DMAUDR1_Msk (0x1UL << DAC_SR_DMAUDR1_Pos) /*!< 0x00002000 */ +#define DAC_SR_DMAUDR1 DAC_SR_DMAUDR1_Msk /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2_Pos (29U) +#define DAC_SR_DMAUDR2_Msk (0x1UL << DAC_SR_DMAUDR2_Pos) /*!< 0x20000000 */ +#define DAC_SR_DMAUDR2 DAC_SR_DMAUDR2_Msk /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE_Pos (0U) +#define CEC_CFGR_PE_Msk (0x1UL << CEC_CFGR_PE_Pos) /*!< 0x00000001 */ +#define CEC_CFGR_PE CEC_CFGR_PE_Msk /*!< Peripheral Enable */ +#define CEC_CFGR_IE_Pos (1U) +#define CEC_CFGR_IE_Msk (0x1UL << CEC_CFGR_IE_Pos) /*!< 0x00000002 */ +#define CEC_CFGR_IE CEC_CFGR_IE_Msk /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM_Pos (2U) +#define CEC_CFGR_BTEM_Msk (0x1UL << CEC_CFGR_BTEM_Pos) /*!< 0x00000004 */ +#define CEC_CFGR_BTEM CEC_CFGR_BTEM_Msk /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM_Pos (3U) +#define CEC_CFGR_BPEM_Msk (0x1UL << CEC_CFGR_BPEM_Pos) /*!< 0x00000008 */ +#define CEC_CFGR_BPEM CEC_CFGR_BPEM_Msk /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA_Pos (0U) +#define CEC_OAR_OA_Msk (0xFUL << CEC_OAR_OA_Pos) /*!< 0x0000000F */ +#define CEC_OAR_OA CEC_OAR_OA_Msk /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 (0x1UL << CEC_OAR_OA_Pos) /*!< 0x00000001 */ +#define CEC_OAR_OA_1 (0x2UL << CEC_OAR_OA_Pos) /*!< 0x00000002 */ +#define CEC_OAR_OA_2 (0x4UL << CEC_OAR_OA_Pos) /*!< 0x00000004 */ +#define CEC_OAR_OA_3 (0x8UL << CEC_OAR_OA_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES_Pos (0U) +#define CEC_PRES_PRES_Msk (0x3FFFUL << CEC_PRES_PRES_Pos) /*!< 0x00003FFF */ +#define CEC_PRES_PRES CEC_PRES_PRES_Msk /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE_Pos (0U) +#define CEC_ESR_BTE_Msk (0x1UL << CEC_ESR_BTE_Pos) /*!< 0x00000001 */ +#define CEC_ESR_BTE CEC_ESR_BTE_Msk /*!< Bit Timing Error */ +#define CEC_ESR_BPE_Pos (1U) +#define CEC_ESR_BPE_Msk (0x1UL << CEC_ESR_BPE_Pos) /*!< 0x00000002 */ +#define CEC_ESR_BPE CEC_ESR_BPE_Msk /*!< Bit Period Error */ +#define CEC_ESR_RBTFE_Pos (2U) +#define CEC_ESR_RBTFE_Msk (0x1UL << CEC_ESR_RBTFE_Pos) /*!< 0x00000004 */ +#define CEC_ESR_RBTFE CEC_ESR_RBTFE_Msk /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE_Pos (3U) +#define CEC_ESR_SBE_Msk (0x1UL << CEC_ESR_SBE_Pos) /*!< 0x00000008 */ +#define CEC_ESR_SBE CEC_ESR_SBE_Msk /*!< Start Bit Error */ +#define CEC_ESR_ACKE_Pos (4U) +#define CEC_ESR_ACKE_Msk (0x1UL << CEC_ESR_ACKE_Pos) /*!< 0x00000010 */ +#define CEC_ESR_ACKE CEC_ESR_ACKE_Msk /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE_Pos (5U) +#define CEC_ESR_LINE_Msk (0x1UL << CEC_ESR_LINE_Pos) /*!< 0x00000020 */ +#define CEC_ESR_LINE CEC_ESR_LINE_Msk /*!< Line Error */ +#define CEC_ESR_TBTFE_Pos (6U) +#define CEC_ESR_TBTFE_Msk (0x1UL << CEC_ESR_TBTFE_Pos) /*!< 0x00000040 */ +#define CEC_ESR_TBTFE CEC_ESR_TBTFE_Msk /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM_Pos (0U) +#define CEC_CSR_TSOM_Msk (0x1UL << CEC_CSR_TSOM_Pos) /*!< 0x00000001 */ +#define CEC_CSR_TSOM CEC_CSR_TSOM_Msk /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM_Pos (1U) +#define CEC_CSR_TEOM_Msk (0x1UL << CEC_CSR_TEOM_Pos) /*!< 0x00000002 */ +#define CEC_CSR_TEOM CEC_CSR_TEOM_Msk /*!< Tx End Of Message */ +#define CEC_CSR_TERR_Pos (2U) +#define CEC_CSR_TERR_Msk (0x1UL << CEC_CSR_TERR_Pos) /*!< 0x00000004 */ +#define CEC_CSR_TERR CEC_CSR_TERR_Msk /*!< Tx Error */ +#define CEC_CSR_TBTRF_Pos (3U) +#define CEC_CSR_TBTRF_Msk (0x1UL << CEC_CSR_TBTRF_Pos) /*!< 0x00000008 */ +#define CEC_CSR_TBTRF CEC_CSR_TBTRF_Msk /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM_Pos (4U) +#define CEC_CSR_RSOM_Msk (0x1UL << CEC_CSR_RSOM_Pos) /*!< 0x00000010 */ +#define CEC_CSR_RSOM CEC_CSR_RSOM_Msk /*!< Rx Start Of Message */ +#define CEC_CSR_REOM_Pos (5U) +#define CEC_CSR_REOM_Msk (0x1UL << CEC_CSR_REOM_Pos) /*!< 0x00000020 */ +#define CEC_CSR_REOM CEC_CSR_REOM_Msk /*!< Rx End Of Message */ +#define CEC_CSR_RERR_Pos (6U) +#define CEC_CSR_RERR_Msk (0x1UL << CEC_CSR_RERR_Pos) /*!< 0x00000040 */ +#define CEC_CSR_RERR CEC_CSR_RERR_Msk /*!< Rx Error */ +#define CEC_CSR_RBTF_Pos (7U) +#define CEC_CSR_RBTF_Msk (0x1UL << CEC_CSR_RBTF_Pos) /*!< 0x00000080 */ +#define CEC_CSR_RBTF CEC_CSR_RBTF_Msk /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD_Pos (0U) +#define CEC_TXD_TXD_Msk (0xFFUL << CEC_TXD_TXD_Pos) /*!< 0x000000FF */ +#define CEC_TXD_TXD CEC_TXD_TXD_Msk /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD_Pos (0U) +#define CEC_RXD_RXD_Msk (0xFFUL << CEC_RXD_RXD_Pos) /*!< 0x000000FF */ +#define CEC_RXD_RXD CEC_RXD_RXD_Msk /*!< Rx Data register */ + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f101x6 + * @{ + */ + +#ifndef __STM32F101x6_H +#define __STM32F101x6_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x08007FFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + + + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + + + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f101xb + * @{ + */ + +#ifndef __STM32F101xB_H +#define __STM32F101xB_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0801FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f101xe + * @{ + */ + +#ifndef __STM32F101xE_H +#define __STM32F101xE_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ + uint32_t RESERVED1; /*!< Reserved, 0x78 */ + uint32_t RESERVED2; /*!< Reserved, 0x7C */ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED3; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FSMC_Bank2_3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; + __IO uint32_t I2SPR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0807FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + +#define FSMC_BASE 0x60000000UL /*!< FSMC base address */ +#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x00001C00UL) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x00002000UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + +#define FSMC_BANK1 (FSMC_BASE) /*!< FSMC Bank1 base address */ +#define FSMC_BANK1_1 (FSMC_BANK1) /*!< FSMC Bank1_1 base address */ +#define FSMC_BANK1_2 (FSMC_BANK1 + 0x04000000UL) /*!< FSMC Bank1_2 base address */ +#define FSMC_BANK1_3 (FSMC_BANK1 + 0x08000000UL) /*!< FSMC Bank1_3 base address */ +#define FSMC_BANK1_4 (FSMC_BANK1 + 0x0C000000UL) /*!< FSMC Bank1_4 base address */ + +#define FSMC_BANK2 (FSMC_BASE + 0x10000000UL) /*!< FSMC Bank2 base address */ +#define FSMC_BANK3 (FSMC_BASE + 0x20000000UL) /*!< FSMC Bank3 base address */ +#define FSMC_BANK4 (FSMC_BASE + 0x30000000UL) /*!< FSMC Bank4 base address */ + +#define FSMC_BANK1_R_BASE (FSMC_R_BASE + 0x00000000UL) /*!< FSMC Bank1 registers base address */ +#define FSMC_BANK1E_R_BASE (FSMC_R_BASE + 0x00000104UL) /*!< FSMC Bank1E registers base address */ +#define FSMC_BANK2_3_R_BASE (FSMC_R_BASE + 0x00000060UL) /*!< FSMC Bank2/Bank3 registers base address */ +#define FSMC_BANK4_R_BASE (FSMC_R_BASE + 0x000000A0UL) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *)GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *)GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *)FSMC_BANK1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *)FSMC_BANK1E_R_BASE) +#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *)FSMC_BANK2_3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *)FSMC_BANK4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + +#define RCC_APB2RSTR_IOPFRST_Pos (7U) +#define RCC_APB2RSTR_IOPFRST_Msk (0x1UL << RCC_APB2RSTR_IOPFRST_Pos) /*!< 0x00000080 */ +#define RCC_APB2RSTR_IOPFRST RCC_APB2RSTR_IOPFRST_Msk /*!< I/O port F reset */ +#define RCC_APB2RSTR_IOPGRST_Pos (8U) +#define RCC_APB2RSTR_IOPGRST_Msk (0x1UL << RCC_APB2RSTR_IOPGRST_Pos) /*!< 0x00000100 */ +#define RCC_APB2RSTR_IOPGRST RCC_APB2RSTR_IOPGRST_Msk /*!< I/O port G reset */ + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + + + +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + +#define RCC_AHBENR_FSMCEN_Pos (8U) +#define RCC_AHBENR_FSMCEN_Msk (0x1UL << RCC_AHBENR_FSMCEN_Pos) /*!< 0x00000100 */ +#define RCC_AHBENR_FSMCEN RCC_AHBENR_FSMCEN_Msk /*!< FSMC clock enable */ + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + +#define RCC_APB2ENR_IOPFEN_Pos (7U) +#define RCC_APB2ENR_IOPFEN_Msk (0x1UL << RCC_APB2ENR_IOPFEN_Pos) /*!< 0x00000080 */ +#define RCC_APB2ENR_IOPFEN RCC_APB2ENR_IOPFEN_Msk /*!< I/O port F clock enable */ +#define RCC_APB2ENR_IOPGEN_Pos (8U) +#define RCC_APB2ENR_IOPGEN_Msk (0x1UL << RCC_APB2ENR_IOPGEN_Pos) /*!< 0x00000100 */ +#define RCC_APB2ENR_IOPGEN RCC_APB2ENR_IOPGEN_Msk /*!< I/O port G clock enable */ + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + + + +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + +#define AFIO_MAPR2_FSMC_NADV_REMAP_Pos (10U) +#define AFIO_MAPR2_FSMC_NADV_REMAP_Msk (0x1UL << AFIO_MAPR2_FSMC_NADV_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR2_FSMC_NADV_REMAP AFIO_MAPR2_FSMC_NADV_REMAP_Msk /*!< FSMC NADV remapping */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f101xg + * @{ + */ + +#ifndef __STM32F101xG_H +#define __STM32F101xG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 1U /*!< STM32 XL-density devices provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM9_IRQn = 24, /*!< TIM9 global Interrupt */ + TIM10_IRQn = 25, /*!< TIM10 global Interrupt */ + TIM11_IRQn = 26, /*!< TIM11 global interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ + uint32_t RESERVED1; /*!< Reserved, 0x78 */ + uint32_t RESERVED2; /*!< Reserved, 0x7C */ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED3; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FSMC_Bank2_3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; + __IO uint32_t I2SPR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0807FFFFUL /*!< FLASH END address of bank1 */ +#define FLASH_BANK2_END 0x080FFFFFUL /*!< FLASH END address of bank2 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + +#define FSMC_BASE 0x60000000UL /*!< FSMC base address */ +#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x00001800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x00001C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x00001C00UL) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x00002000UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM9_BASE (APB2PERIPH_BASE + 0x00004C00UL) +#define TIM10_BASE (APB2PERIPH_BASE + 0x00005000UL) +#define TIM11_BASE (APB2PERIPH_BASE + 0x00005400UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + +#define FSMC_BANK1 (FSMC_BASE) /*!< FSMC Bank1 base address */ +#define FSMC_BANK1_1 (FSMC_BANK1) /*!< FSMC Bank1_1 base address */ +#define FSMC_BANK1_2 (FSMC_BANK1 + 0x04000000UL) /*!< FSMC Bank1_2 base address */ +#define FSMC_BANK1_3 (FSMC_BANK1 + 0x08000000UL) /*!< FSMC Bank1_3 base address */ +#define FSMC_BANK1_4 (FSMC_BANK1 + 0x0C000000UL) /*!< FSMC Bank1_4 base address */ + +#define FSMC_BANK2 (FSMC_BASE + 0x10000000UL) /*!< FSMC Bank2 base address */ +#define FSMC_BANK3 (FSMC_BASE + 0x20000000UL) /*!< FSMC Bank3 base address */ +#define FSMC_BANK4 (FSMC_BASE + 0x30000000UL) /*!< FSMC Bank4 base address */ + +#define FSMC_BANK1_R_BASE (FSMC_R_BASE + 0x00000000UL) /*!< FSMC Bank1 registers base address */ +#define FSMC_BANK1E_R_BASE (FSMC_R_BASE + 0x00000104UL) /*!< FSMC Bank1E registers base address */ +#define FSMC_BANK2_3_R_BASE (FSMC_R_BASE + 0x00000060UL) /*!< FSMC Bank2/Bank3 registers base address */ +#define FSMC_BANK4_R_BASE (FSMC_R_BASE + 0x000000A0UL) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define TIM12 ((TIM_TypeDef *)TIM12_BASE) +#define TIM13 ((TIM_TypeDef *)TIM13_BASE) +#define TIM14 ((TIM_TypeDef *)TIM14_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *)GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *)GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define TIM9 ((TIM_TypeDef *)TIM9_BASE) +#define TIM10 ((TIM_TypeDef *)TIM10_BASE) +#define TIM11 ((TIM_TypeDef *)TIM11_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *)FSMC_BANK1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *)FSMC_BANK1E_R_BASE) +#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *)FSMC_BANK2_3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *)FSMC_BANK4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + +#define RCC_APB2RSTR_IOPFRST_Pos (7U) +#define RCC_APB2RSTR_IOPFRST_Msk (0x1UL << RCC_APB2RSTR_IOPFRST_Pos) /*!< 0x00000080 */ +#define RCC_APB2RSTR_IOPFRST RCC_APB2RSTR_IOPFRST_Msk /*!< I/O port F reset */ +#define RCC_APB2RSTR_IOPGRST_Pos (8U) +#define RCC_APB2RSTR_IOPGRST_Msk (0x1UL << RCC_APB2RSTR_IOPGRST_Pos) /*!< 0x00000100 */ +#define RCC_APB2RSTR_IOPGRST RCC_APB2RSTR_IOPGRST_Msk /*!< I/O port G reset */ + + +#define RCC_APB2RSTR_TIM9RST_Pos (19U) +#define RCC_APB2RSTR_TIM9RST_Msk (0x1UL << RCC_APB2RSTR_TIM9RST_Pos) /*!< 0x00080000 */ +#define RCC_APB2RSTR_TIM9RST RCC_APB2RSTR_TIM9RST_Msk /*!< TIM9 Timer reset */ +#define RCC_APB2RSTR_TIM10RST_Pos (20U) +#define RCC_APB2RSTR_TIM10RST_Msk (0x1UL << RCC_APB2RSTR_TIM10RST_Pos) /*!< 0x00100000 */ +#define RCC_APB2RSTR_TIM10RST RCC_APB2RSTR_TIM10RST_Msk /*!< TIM10 Timer reset */ +#define RCC_APB2RSTR_TIM11RST_Pos (21U) +#define RCC_APB2RSTR_TIM11RST_Msk (0x1UL << RCC_APB2RSTR_TIM11RST_Pos) /*!< 0x00200000 */ +#define RCC_APB2RSTR_TIM11RST RCC_APB2RSTR_TIM11RST_Msk /*!< TIM11 Timer reset */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + + + +#define RCC_APB1RSTR_TIM12RST_Pos (6U) +#define RCC_APB1RSTR_TIM12RST_Msk (0x1UL << RCC_APB1RSTR_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR_TIM12RST RCC_APB1RSTR_TIM12RST_Msk /*!< TIM12 Timer reset */ +#define RCC_APB1RSTR_TIM13RST_Pos (7U) +#define RCC_APB1RSTR_TIM13RST_Msk (0x1UL << RCC_APB1RSTR_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR_TIM13RST RCC_APB1RSTR_TIM13RST_Msk /*!< TIM13 Timer reset */ +#define RCC_APB1RSTR_TIM14RST_Pos (8U) +#define RCC_APB1RSTR_TIM14RST_Msk (0x1UL << RCC_APB1RSTR_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR_TIM14RST RCC_APB1RSTR_TIM14RST_Msk /*!< TIM14 Timer reset */ +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + +#define RCC_AHBENR_FSMCEN_Pos (8U) +#define RCC_AHBENR_FSMCEN_Msk (0x1UL << RCC_AHBENR_FSMCEN_Pos) /*!< 0x00000100 */ +#define RCC_AHBENR_FSMCEN RCC_AHBENR_FSMCEN_Msk /*!< FSMC clock enable */ + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + +#define RCC_APB2ENR_IOPFEN_Pos (7U) +#define RCC_APB2ENR_IOPFEN_Msk (0x1UL << RCC_APB2ENR_IOPFEN_Pos) /*!< 0x00000080 */ +#define RCC_APB2ENR_IOPFEN RCC_APB2ENR_IOPFEN_Msk /*!< I/O port F clock enable */ +#define RCC_APB2ENR_IOPGEN_Pos (8U) +#define RCC_APB2ENR_IOPGEN_Msk (0x1UL << RCC_APB2ENR_IOPGEN_Pos) /*!< 0x00000100 */ +#define RCC_APB2ENR_IOPGEN RCC_APB2ENR_IOPGEN_Msk /*!< I/O port G clock enable */ + + +#define RCC_APB2ENR_TIM9EN_Pos (19U) +#define RCC_APB2ENR_TIM9EN_Msk (0x1UL << RCC_APB2ENR_TIM9EN_Pos) /*!< 0x00080000 */ +#define RCC_APB2ENR_TIM9EN RCC_APB2ENR_TIM9EN_Msk /*!< TIM9 Timer clock enable */ +#define RCC_APB2ENR_TIM10EN_Pos (20U) +#define RCC_APB2ENR_TIM10EN_Msk (0x1UL << RCC_APB2ENR_TIM10EN_Pos) /*!< 0x00100000 */ +#define RCC_APB2ENR_TIM10EN RCC_APB2ENR_TIM10EN_Msk /*!< TIM10 Timer clock enable */ +#define RCC_APB2ENR_TIM11EN_Pos (21U) +#define RCC_APB2ENR_TIM11EN_Msk (0x1UL << RCC_APB2ENR_TIM11EN_Pos) /*!< 0x00200000 */ +#define RCC_APB2ENR_TIM11EN RCC_APB2ENR_TIM11EN_Msk /*!< TIM11 Timer clock enable */ + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + + + +#define RCC_APB1ENR_TIM12EN_Pos (6U) +#define RCC_APB1ENR_TIM12EN_Msk (0x1UL << RCC_APB1ENR_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR_TIM12EN RCC_APB1ENR_TIM12EN_Msk /*!< TIM12 Timer clock enable */ +#define RCC_APB1ENR_TIM13EN_Pos (7U) +#define RCC_APB1ENR_TIM13EN_Msk (0x1UL << RCC_APB1ENR_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR_TIM13EN RCC_APB1ENR_TIM13EN_Msk /*!< TIM13 Timer clock enable */ +#define RCC_APB1ENR_TIM14EN_Pos (8U) +#define RCC_APB1ENR_TIM14EN_Msk (0x1UL << RCC_APB1ENR_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR_TIM14EN RCC_APB1ENR_TIM14EN_Msk /*!< TIM14 Timer clock enable */ +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + +#define AFIO_MAPR2_TIM9_REMAP_Pos (5U) +#define AFIO_MAPR2_TIM9_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM9_REMAP_Pos) /*!< 0x00000020 */ +#define AFIO_MAPR2_TIM9_REMAP AFIO_MAPR2_TIM9_REMAP_Msk /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP_Pos (6U) +#define AFIO_MAPR2_TIM10_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM10_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR2_TIM10_REMAP AFIO_MAPR2_TIM10_REMAP_Msk /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP_Pos (7U) +#define AFIO_MAPR2_TIM11_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM11_REMAP_Pos) /*!< 0x00000080 */ +#define AFIO_MAPR2_TIM11_REMAP AFIO_MAPR2_TIM11_REMAP_Msk /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP_Pos (8U) +#define AFIO_MAPR2_TIM13_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM13_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR2_TIM13_REMAP AFIO_MAPR2_TIM13_REMAP_Msk /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP_Pos (9U) +#define AFIO_MAPR2_TIM14_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM14_REMAP_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR2_TIM14_REMAP AFIO_MAPR2_TIM14_REMAP_Msk /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP_Pos (10U) +#define AFIO_MAPR2_FSMC_NADV_REMAP_Msk (0x1UL << AFIO_MAPR2_FSMC_NADV_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR2_FSMC_NADV_REMAP AFIO_MAPR2_FSMC_NADV_REMAP_Msk /*!< FSMC NADV remapping */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f102x6 + * @{ + */ + +#ifndef __STM32F102x6_H +#define __STM32F102x6_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + USB_HP_IRQn = 19, /*!< USB Device High Priority */ + USB_LP_IRQn = 20, /*!< USB Device Low Priority */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x08007FFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f102xb + * @{ + */ + +#ifndef __STM32F102xB_H +#define __STM32F102xB_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + USB_HP_IRQn = 19, /*!< USB Device High Priority */ + USB_LP_IRQn = 20, /*!< USB Device Low Priority */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0801FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f103x6 + * @{ + */ + +#ifndef __STM32F103x6_H +#define __STM32F103x6_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[14]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x08007FFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f103xb + * @{ + */ + +#ifndef __STM32F103xB_H +#define __STM32F103xB_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "stdint.h" +#include "arm_defines.h" +#include "core_cm3_matlab.h" +#include "system_stm32f1xx.h" + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[14]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE_SHIFT 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END_SHIFT 0x0801FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE_SHIFT 0x20000000UL /*!< SRAM base address in the alias region */ +#define SRAM_BB_BASE_SHIFT 0x22000000UL /*!< SRAM base address in the bit-band region */ + +#define PERIPH_BASE_SHIFT 0x40000000UL /*!< Peripheral base address in the alias region */ +#define PERIPH_BB_BASE_SHIFT 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +#define MCU_MEM_END 0xA0000FFFUL /*!< CCM data RAM end address */ + +#define SRAM_SIZE 0x1C000UL /* (112 KB) */ +#define FLASH_SIZE (FLASH_BANK1_END_SHIFT - FLASH_BASE_SHIFT) +#define PERIPH_SIZE (PERIPH_BB_BASE_SHIFT - PERIPH_BASE_SHIFT) +#define PERIPH_BB_SIZE (MCU_MEM_END-PERIPH_BB_BASE_SHIFT) + + +typedef struct _memory +{ + //uint8_t RESERVED[FLASH_BASE_SHIFT]; + + uint8_t FLASH_BASE[FLASH_SIZE]; + uint8_t FLASH_BANK1_END[10]; + uint8_t SRAM_BASE[SRAM_SIZE]; + uint8_t SRAM_BB_BASE[SRAM_SIZE]; + uint8_t PERIPH_BASE[PERIPH_SIZE]; + uint8_t PERIPH_BB_BASE[PERIPH_BB_SIZE]; +}MCU_MemoryTypeDef; +extern MCU_MemoryTypeDef MCU_MEM; + +#define FLASH_BASE MCU_MEM.FLASH_BASE /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END MCU_MEM.FLASH_BANK1_END /*!< FLASH END address of bank1 */ +#define SRAM_BASE MCU_MEM.SRAM_BASE /*!< SRAM base address in the alias region */ +#define PERIPH_BASE MCU_MEM.PERIPH_BASE /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE MCU_MEM.SRAM_BB_BASE /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE MCU_MEM.PERIPH_BB_BASE /*!< Peripheral base address in the bit-band region */ +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f103xe + * @{ + */ + +#ifndef __STM32F103xE_H +#define __STM32F103xE_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[14]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ + uint32_t RESERVED1; /*!< Reserved, 0x78 */ + uint32_t RESERVED2; /*!< Reserved, 0x7C */ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED3; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FSMC_Bank2_3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; + __IO uint32_t I2SPR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0807FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + +#define FSMC_BASE 0x60000000UL /*!< FSMC base address */ +#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x00001C00UL) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x00002000UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define TIM8_BASE (APB2PERIPH_BASE + 0x00003400UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define ADC3_BASE (APB2PERIPH_BASE + 0x00003C00UL) + +#define SDIO_BASE (PERIPH_BASE + 0x00018000UL) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + +#define FSMC_BANK1 (FSMC_BASE) /*!< FSMC Bank1 base address */ +#define FSMC_BANK1_1 (FSMC_BANK1) /*!< FSMC Bank1_1 base address */ +#define FSMC_BANK1_2 (FSMC_BANK1 + 0x04000000UL) /*!< FSMC Bank1_2 base address */ +#define FSMC_BANK1_3 (FSMC_BANK1 + 0x08000000UL) /*!< FSMC Bank1_3 base address */ +#define FSMC_BANK1_4 (FSMC_BANK1 + 0x0C000000UL) /*!< FSMC Bank1_4 base address */ + +#define FSMC_BANK2 (FSMC_BASE + 0x10000000UL) /*!< FSMC Bank2 base address */ +#define FSMC_BANK3 (FSMC_BASE + 0x20000000UL) /*!< FSMC Bank3 base address */ +#define FSMC_BANK4 (FSMC_BASE + 0x30000000UL) /*!< FSMC Bank4 base address */ + +#define FSMC_BANK1_R_BASE (FSMC_R_BASE + 0x00000000UL) /*!< FSMC Bank1 registers base address */ +#define FSMC_BANK1E_R_BASE (FSMC_R_BASE + 0x00000104UL) /*!< FSMC Bank1E registers base address */ +#define FSMC_BANK2_3_R_BASE (FSMC_R_BASE + 0x00000060UL) /*!< FSMC Bank2/Bank3 registers base address */ +#define FSMC_BANK4_R_BASE (FSMC_R_BASE + 0x000000A0UL) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *)GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *)GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC3 ((ADC_TypeDef *)ADC3_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define TIM8 ((TIM_TypeDef *)TIM8_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define SDIO ((SDIO_TypeDef *)SDIO_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *)FSMC_BANK1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *)FSMC_BANK1E_R_BASE) +#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *)FSMC_BANK2_3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *)FSMC_BANK4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + +#define RCC_APB2RSTR_IOPFRST_Pos (7U) +#define RCC_APB2RSTR_IOPFRST_Msk (0x1UL << RCC_APB2RSTR_IOPFRST_Pos) /*!< 0x00000080 */ +#define RCC_APB2RSTR_IOPFRST RCC_APB2RSTR_IOPFRST_Msk /*!< I/O port F reset */ +#define RCC_APB2RSTR_IOPGRST_Pos (8U) +#define RCC_APB2RSTR_IOPGRST_Msk (0x1UL << RCC_APB2RSTR_IOPGRST_Pos) /*!< 0x00000100 */ +#define RCC_APB2RSTR_IOPGRST RCC_APB2RSTR_IOPGRST_Msk /*!< I/O port G reset */ +#define RCC_APB2RSTR_TIM8RST_Pos (13U) +#define RCC_APB2RSTR_TIM8RST_Msk (0x1UL << RCC_APB2RSTR_TIM8RST_Pos) /*!< 0x00002000 */ +#define RCC_APB2RSTR_TIM8RST RCC_APB2RSTR_TIM8RST_Msk /*!< TIM8 Timer reset */ +#define RCC_APB2RSTR_ADC3RST_Pos (15U) +#define RCC_APB2RSTR_ADC3RST_Msk (0x1UL << RCC_APB2RSTR_ADC3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB2RSTR_ADC3RST RCC_APB2RSTR_ADC3RST_Msk /*!< ADC3 interface reset */ + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + + + +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + +#define RCC_AHBENR_FSMCEN_Pos (8U) +#define RCC_AHBENR_FSMCEN_Msk (0x1UL << RCC_AHBENR_FSMCEN_Pos) /*!< 0x00000100 */ +#define RCC_AHBENR_FSMCEN RCC_AHBENR_FSMCEN_Msk /*!< FSMC clock enable */ +#define RCC_AHBENR_SDIOEN_Pos (10U) +#define RCC_AHBENR_SDIOEN_Msk (0x1UL << RCC_AHBENR_SDIOEN_Pos) /*!< 0x00000400 */ +#define RCC_AHBENR_SDIOEN RCC_AHBENR_SDIOEN_Msk /*!< SDIO clock enable */ + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + +#define RCC_APB2ENR_IOPFEN_Pos (7U) +#define RCC_APB2ENR_IOPFEN_Msk (0x1UL << RCC_APB2ENR_IOPFEN_Pos) /*!< 0x00000080 */ +#define RCC_APB2ENR_IOPFEN RCC_APB2ENR_IOPFEN_Msk /*!< I/O port F clock enable */ +#define RCC_APB2ENR_IOPGEN_Pos (8U) +#define RCC_APB2ENR_IOPGEN_Msk (0x1UL << RCC_APB2ENR_IOPGEN_Pos) /*!< 0x00000100 */ +#define RCC_APB2ENR_IOPGEN RCC_APB2ENR_IOPGEN_Msk /*!< I/O port G clock enable */ +#define RCC_APB2ENR_TIM8EN_Pos (13U) +#define RCC_APB2ENR_TIM8EN_Msk (0x1UL << RCC_APB2ENR_TIM8EN_Pos) /*!< 0x00002000 */ +#define RCC_APB2ENR_TIM8EN RCC_APB2ENR_TIM8EN_Msk /*!< TIM8 Timer clock enable */ +#define RCC_APB2ENR_ADC3EN_Pos (15U) +#define RCC_APB2ENR_ADC3EN_Msk (0x1UL << RCC_APB2ENR_ADC3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB2ENR_ADC3EN RCC_APB2ENR_ADC3EN_Msk /*!< DMA1 clock enable */ + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + + + +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP_Pos (17U) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP_Msk (0x1UL << AFIO_MAPR_ADC1_ETRGINJ_REMAP_Pos) /*!< 0x00020000 */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP AFIO_MAPR_ADC1_ETRGINJ_REMAP_Msk /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP_Pos (18U) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP_Msk (0x1UL << AFIO_MAPR_ADC1_ETRGREG_REMAP_Pos) /*!< 0x00040000 */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP AFIO_MAPR_ADC1_ETRGREG_REMAP_Msk /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP_Pos (19U) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP_Msk (0x1UL << AFIO_MAPR_ADC2_ETRGINJ_REMAP_Pos) /*!< 0x00080000 */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP AFIO_MAPR_ADC2_ETRGINJ_REMAP_Msk /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP_Pos (20U) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP_Msk (0x1UL << AFIO_MAPR_ADC2_ETRGREG_REMAP_Pos) /*!< 0x00100000 */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP AFIO_MAPR_ADC2_ETRGREG_REMAP_Msk /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + +#define AFIO_MAPR2_FSMC_NADV_REMAP_Pos (10U) +#define AFIO_MAPR2_FSMC_NADV_REMAP_Msk (0x1UL << AFIO_MAPR2_FSMC_NADV_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR2_FSMC_NADV_REMAP AFIO_MAPR2_FSMC_NADV_REMAP_Msk /*!< FSMC NADV remapping */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f103xg + * @{ + */ + +#ifndef __STM32F103xG_H +#define __STM32F103xG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 1U /*!< STM32 XL-density devices provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[14]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ + uint32_t RESERVED1; /*!< Reserved, 0x78 */ + uint32_t RESERVED2; /*!< Reserved, 0x7C */ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED3; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FSMC_Bank2_3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; + __IO uint32_t I2SPR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0807FFFFUL /*!< FLASH END address of bank1 */ +#define FLASH_BANK2_END 0x080FFFFFUL /*!< FLASH END address of bank2 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + +#define FSMC_BASE 0x60000000UL /*!< FSMC base address */ +#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x00001800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x00001C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x00001C00UL) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x00002000UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define TIM8_BASE (APB2PERIPH_BASE + 0x00003400UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define ADC3_BASE (APB2PERIPH_BASE + 0x00003C00UL) +#define TIM9_BASE (APB2PERIPH_BASE + 0x00004C00UL) +#define TIM10_BASE (APB2PERIPH_BASE + 0x00005000UL) +#define TIM11_BASE (APB2PERIPH_BASE + 0x00005400UL) + +#define SDIO_BASE (PERIPH_BASE + 0x00018000UL) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + +#define FSMC_BANK1 (FSMC_BASE) /*!< FSMC Bank1 base address */ +#define FSMC_BANK1_1 (FSMC_BANK1) /*!< FSMC Bank1_1 base address */ +#define FSMC_BANK1_2 (FSMC_BANK1 + 0x04000000UL) /*!< FSMC Bank1_2 base address */ +#define FSMC_BANK1_3 (FSMC_BANK1 + 0x08000000UL) /*!< FSMC Bank1_3 base address */ +#define FSMC_BANK1_4 (FSMC_BANK1 + 0x0C000000UL) /*!< FSMC Bank1_4 base address */ + +#define FSMC_BANK2 (FSMC_BASE + 0x10000000UL) /*!< FSMC Bank2 base address */ +#define FSMC_BANK3 (FSMC_BASE + 0x20000000UL) /*!< FSMC Bank3 base address */ +#define FSMC_BANK4 (FSMC_BASE + 0x30000000UL) /*!< FSMC Bank4 base address */ + +#define FSMC_BANK1_R_BASE (FSMC_R_BASE + 0x00000000UL) /*!< FSMC Bank1 registers base address */ +#define FSMC_BANK1E_R_BASE (FSMC_R_BASE + 0x00000104UL) /*!< FSMC Bank1E registers base address */ +#define FSMC_BANK2_3_R_BASE (FSMC_R_BASE + 0x00000060UL) /*!< FSMC Bank2/Bank3 registers base address */ +#define FSMC_BANK4_R_BASE (FSMC_R_BASE + 0x000000A0UL) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define TIM12 ((TIM_TypeDef *)TIM12_BASE) +#define TIM13 ((TIM_TypeDef *)TIM13_BASE) +#define TIM14 ((TIM_TypeDef *)TIM14_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *)GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *)GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC3 ((ADC_TypeDef *)ADC3_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define TIM8 ((TIM_TypeDef *)TIM8_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define TIM9 ((TIM_TypeDef *)TIM9_BASE) +#define TIM10 ((TIM_TypeDef *)TIM10_BASE) +#define TIM11 ((TIM_TypeDef *)TIM11_BASE) +#define SDIO ((SDIO_TypeDef *)SDIO_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *)FSMC_BANK1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *)FSMC_BANK1E_R_BASE) +#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *)FSMC_BANK2_3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *)FSMC_BANK4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + +#define RCC_APB2RSTR_IOPFRST_Pos (7U) +#define RCC_APB2RSTR_IOPFRST_Msk (0x1UL << RCC_APB2RSTR_IOPFRST_Pos) /*!< 0x00000080 */ +#define RCC_APB2RSTR_IOPFRST RCC_APB2RSTR_IOPFRST_Msk /*!< I/O port F reset */ +#define RCC_APB2RSTR_IOPGRST_Pos (8U) +#define RCC_APB2RSTR_IOPGRST_Msk (0x1UL << RCC_APB2RSTR_IOPGRST_Pos) /*!< 0x00000100 */ +#define RCC_APB2RSTR_IOPGRST RCC_APB2RSTR_IOPGRST_Msk /*!< I/O port G reset */ +#define RCC_APB2RSTR_TIM8RST_Pos (13U) +#define RCC_APB2RSTR_TIM8RST_Msk (0x1UL << RCC_APB2RSTR_TIM8RST_Pos) /*!< 0x00002000 */ +#define RCC_APB2RSTR_TIM8RST RCC_APB2RSTR_TIM8RST_Msk /*!< TIM8 Timer reset */ +#define RCC_APB2RSTR_ADC3RST_Pos (15U) +#define RCC_APB2RSTR_ADC3RST_Msk (0x1UL << RCC_APB2RSTR_ADC3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB2RSTR_ADC3RST RCC_APB2RSTR_ADC3RST_Msk /*!< ADC3 interface reset */ + + +#define RCC_APB2RSTR_TIM9RST_Pos (19U) +#define RCC_APB2RSTR_TIM9RST_Msk (0x1UL << RCC_APB2RSTR_TIM9RST_Pos) /*!< 0x00080000 */ +#define RCC_APB2RSTR_TIM9RST RCC_APB2RSTR_TIM9RST_Msk /*!< TIM9 Timer reset */ +#define RCC_APB2RSTR_TIM10RST_Pos (20U) +#define RCC_APB2RSTR_TIM10RST_Msk (0x1UL << RCC_APB2RSTR_TIM10RST_Pos) /*!< 0x00100000 */ +#define RCC_APB2RSTR_TIM10RST RCC_APB2RSTR_TIM10RST_Msk /*!< TIM10 Timer reset */ +#define RCC_APB2RSTR_TIM11RST_Pos (21U) +#define RCC_APB2RSTR_TIM11RST_Msk (0x1UL << RCC_APB2RSTR_TIM11RST_Pos) /*!< 0x00200000 */ +#define RCC_APB2RSTR_TIM11RST RCC_APB2RSTR_TIM11RST_Msk /*!< TIM11 Timer reset */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + + + +#define RCC_APB1RSTR_TIM12RST_Pos (6U) +#define RCC_APB1RSTR_TIM12RST_Msk (0x1UL << RCC_APB1RSTR_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR_TIM12RST RCC_APB1RSTR_TIM12RST_Msk /*!< TIM12 Timer reset */ +#define RCC_APB1RSTR_TIM13RST_Pos (7U) +#define RCC_APB1RSTR_TIM13RST_Msk (0x1UL << RCC_APB1RSTR_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR_TIM13RST RCC_APB1RSTR_TIM13RST_Msk /*!< TIM13 Timer reset */ +#define RCC_APB1RSTR_TIM14RST_Pos (8U) +#define RCC_APB1RSTR_TIM14RST_Msk (0x1UL << RCC_APB1RSTR_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR_TIM14RST RCC_APB1RSTR_TIM14RST_Msk /*!< TIM14 Timer reset */ +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + +#define RCC_AHBENR_FSMCEN_Pos (8U) +#define RCC_AHBENR_FSMCEN_Msk (0x1UL << RCC_AHBENR_FSMCEN_Pos) /*!< 0x00000100 */ +#define RCC_AHBENR_FSMCEN RCC_AHBENR_FSMCEN_Msk /*!< FSMC clock enable */ +#define RCC_AHBENR_SDIOEN_Pos (10U) +#define RCC_AHBENR_SDIOEN_Msk (0x1UL << RCC_AHBENR_SDIOEN_Pos) /*!< 0x00000400 */ +#define RCC_AHBENR_SDIOEN RCC_AHBENR_SDIOEN_Msk /*!< SDIO clock enable */ + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + +#define RCC_APB2ENR_IOPFEN_Pos (7U) +#define RCC_APB2ENR_IOPFEN_Msk (0x1UL << RCC_APB2ENR_IOPFEN_Pos) /*!< 0x00000080 */ +#define RCC_APB2ENR_IOPFEN RCC_APB2ENR_IOPFEN_Msk /*!< I/O port F clock enable */ +#define RCC_APB2ENR_IOPGEN_Pos (8U) +#define RCC_APB2ENR_IOPGEN_Msk (0x1UL << RCC_APB2ENR_IOPGEN_Pos) /*!< 0x00000100 */ +#define RCC_APB2ENR_IOPGEN RCC_APB2ENR_IOPGEN_Msk /*!< I/O port G clock enable */ +#define RCC_APB2ENR_TIM8EN_Pos (13U) +#define RCC_APB2ENR_TIM8EN_Msk (0x1UL << RCC_APB2ENR_TIM8EN_Pos) /*!< 0x00002000 */ +#define RCC_APB2ENR_TIM8EN RCC_APB2ENR_TIM8EN_Msk /*!< TIM8 Timer clock enable */ +#define RCC_APB2ENR_ADC3EN_Pos (15U) +#define RCC_APB2ENR_ADC3EN_Msk (0x1UL << RCC_APB2ENR_ADC3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB2ENR_ADC3EN RCC_APB2ENR_ADC3EN_Msk /*!< DMA1 clock enable */ + + +#define RCC_APB2ENR_TIM9EN_Pos (19U) +#define RCC_APB2ENR_TIM9EN_Msk (0x1UL << RCC_APB2ENR_TIM9EN_Pos) /*!< 0x00080000 */ +#define RCC_APB2ENR_TIM9EN RCC_APB2ENR_TIM9EN_Msk /*!< TIM9 Timer clock enable */ +#define RCC_APB2ENR_TIM10EN_Pos (20U) +#define RCC_APB2ENR_TIM10EN_Msk (0x1UL << RCC_APB2ENR_TIM10EN_Pos) /*!< 0x00100000 */ +#define RCC_APB2ENR_TIM10EN RCC_APB2ENR_TIM10EN_Msk /*!< TIM10 Timer clock enable */ +#define RCC_APB2ENR_TIM11EN_Pos (21U) +#define RCC_APB2ENR_TIM11EN_Msk (0x1UL << RCC_APB2ENR_TIM11EN_Pos) /*!< 0x00200000 */ +#define RCC_APB2ENR_TIM11EN RCC_APB2ENR_TIM11EN_Msk /*!< TIM11 Timer clock enable */ + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + + + +#define RCC_APB1ENR_TIM12EN_Pos (6U) +#define RCC_APB1ENR_TIM12EN_Msk (0x1UL << RCC_APB1ENR_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR_TIM12EN RCC_APB1ENR_TIM12EN_Msk /*!< TIM12 Timer clock enable */ +#define RCC_APB1ENR_TIM13EN_Pos (7U) +#define RCC_APB1ENR_TIM13EN_Msk (0x1UL << RCC_APB1ENR_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR_TIM13EN RCC_APB1ENR_TIM13EN_Msk /*!< TIM13 Timer clock enable */ +#define RCC_APB1ENR_TIM14EN_Pos (8U) +#define RCC_APB1ENR_TIM14EN_Msk (0x1UL << RCC_APB1ENR_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR_TIM14EN RCC_APB1ENR_TIM14EN_Msk /*!< TIM14 Timer clock enable */ +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP_Pos (17U) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP_Msk (0x1UL << AFIO_MAPR_ADC1_ETRGINJ_REMAP_Pos) /*!< 0x00020000 */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP AFIO_MAPR_ADC1_ETRGINJ_REMAP_Msk /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP_Pos (18U) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP_Msk (0x1UL << AFIO_MAPR_ADC1_ETRGREG_REMAP_Pos) /*!< 0x00040000 */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP AFIO_MAPR_ADC1_ETRGREG_REMAP_Msk /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP_Pos (19U) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP_Msk (0x1UL << AFIO_MAPR_ADC2_ETRGINJ_REMAP_Pos) /*!< 0x00080000 */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP AFIO_MAPR_ADC2_ETRGINJ_REMAP_Msk /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP_Pos (20U) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP_Msk (0x1UL << AFIO_MAPR_ADC2_ETRGREG_REMAP_Pos) /*!< 0x00100000 */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP AFIO_MAPR_ADC2_ETRGREG_REMAP_Msk /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + +#define AFIO_MAPR2_TIM9_REMAP_Pos (5U) +#define AFIO_MAPR2_TIM9_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM9_REMAP_Pos) /*!< 0x00000020 */ +#define AFIO_MAPR2_TIM9_REMAP AFIO_MAPR2_TIM9_REMAP_Msk /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP_Pos (6U) +#define AFIO_MAPR2_TIM10_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM10_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR2_TIM10_REMAP AFIO_MAPR2_TIM10_REMAP_Msk /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP_Pos (7U) +#define AFIO_MAPR2_TIM11_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM11_REMAP_Pos) /*!< 0x00000080 */ +#define AFIO_MAPR2_TIM11_REMAP AFIO_MAPR2_TIM11_REMAP_Msk /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP_Pos (8U) +#define AFIO_MAPR2_TIM13_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM13_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR2_TIM13_REMAP AFIO_MAPR2_TIM13_REMAP_Msk /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP_Pos (9U) +#define AFIO_MAPR2_TIM14_REMAP_Msk (0x1UL << AFIO_MAPR2_TIM14_REMAP_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR2_TIM14_REMAP AFIO_MAPR2_TIM14_REMAP_Msk /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP_Pos (10U) +#define AFIO_MAPR2_FSMC_NADV_REMAP_Msk (0x1UL << AFIO_MAPR2_FSMC_NADV_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR2_FSMC_NADV_REMAP AFIO_MAPR2_FSMC_NADV_REMAP_Msk /*!< FSMC NADV remapping */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f105xc + * @{ + */ + +#ifndef __STM32F105xC_H +#define __STM32F105xC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[28]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; + __IO uint32_t I2SPR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + +/** + * @brief __USB_OTG_Core_register + */ + +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset: 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset: 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset: 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset: 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset: 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset: 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset: 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset: 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset: 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register Address offset: 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset: 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset: 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h*/ + __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset: 038h */ + __IO uint32_t CID; /*!< User ID Register Address offset: 03Ch */ + uint32_t Reserved40[48]; /*!< Reserved 040h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset: 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 0x104 */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief __device_Registers + */ + +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register Address offset: 800h*/ + __IO uint32_t DCTL; /*!< dev Control Register Address offset: 804h*/ + __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset: 808h*/ + uint32_t Reserved0C; /*!< Reserved 80Ch*/ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset: 810h*/ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset: 814h*/ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset: 818h*/ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset: 81Ch*/ + uint32_t Reserved20; /*!< Reserved 820h*/ + uint32_t Reserved9; /*!< Reserved 824h*/ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset: 828h*/ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset: 82Ch*/ + __IO uint32_t DTHRCTL; /*!< dev thr Address offset: 830h*/ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset: 834h*/ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset: 838h*/ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ + uint32_t Reserved40; /*!< dedicated EP mask Address offset: 840h*/ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset: 844h*/ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch*/ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset: 884h*/ +} USB_OTG_DeviceTypeDef; + +/** + * @brief __IN_Endpoint-Specific_Register + */ + +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h*/ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief __OUT_Endpoint-Specific_Registers + */ + +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h*/ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief __Host_Mode_Register_Structures + */ + +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h*/ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h*/ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h*/ + uint32_t Reserved40C; /*!< Reserved 40Ch*/ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h*/ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h*/ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h*/ +} USB_OTG_HostTypeDef; + +/** + * @brief __Host_Channel_Specific_Registers + */ + +typedef struct +{ + __IO uint32_t HCCHAR; + __IO uint32_t HCSPLT; + __IO uint32_t HCINT; + __IO uint32_t HCINTMSK; + __IO uint32_t HCTSIZ; + __IO uint32_t HCDMA; + uint32_t Reserved[2]; +} USB_OTG_HostChannelTypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0803FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define CAN2_BASE (APB1PERIPH_BASE + 0x00006800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + +/*!< USB registers base address */ +#define USB_OTG_FS_PERIPH_BASE 0x50000000UL + +#define USB_OTG_GLOBAL_BASE 0x00000000UL +#define USB_OTG_DEVICE_BASE 0x00000800UL +#define USB_OTG_IN_ENDPOINT_BASE 0x00000900UL +#define USB_OTG_OUT_ENDPOINT_BASE 0x00000B00UL +#define USB_OTG_EP_REG_SIZE 0x00000020UL +#define USB_OTG_HOST_BASE 0x00000400UL +#define USB_OTG_HOST_PORT_BASE 0x00000440UL +#define USB_OTG_HOST_CHANNEL_BASE 0x00000500UL +#define USB_OTG_HOST_CHANNEL_SIZE 0x00000020UL +#define USB_OTG_PCGCCTL_BASE 0x00000E00UL +#define USB_OTG_FIFO_BASE 0x00001000UL +#define USB_OTG_FIFO_SIZE 0x00001000UL + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define CAN2 ((CAN_TypeDef *)CAN2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *)USB_OTG_FS_PERIPH_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 serie) + */ +#define RCC_PLL2_SUPPORT /*!< Support PLL2 */ +#define RCC_PLLI2S_SUPPORT + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + +#define RCC_CR_PLL2ON_Pos (26U) +#define RCC_CR_PLL2ON_Msk (0x1UL << RCC_CR_PLL2ON_Pos) /*!< 0x04000000 */ +#define RCC_CR_PLL2ON RCC_CR_PLL2ON_Msk /*!< PLL2 enable */ +#define RCC_CR_PLL2RDY_Pos (27U) +#define RCC_CR_PLL2RDY_Msk (0x1UL << RCC_CR_PLL2RDY_Pos) /*!< 0x08000000 */ +#define RCC_CR_PLL2RDY RCC_CR_PLL2RDY_Msk /*!< PLL2 clock ready flag */ + +#define RCC_CR_PLL3ON_Pos (28U) +#define RCC_CR_PLL3ON_Msk (0x1UL << RCC_CR_PLL3ON_Pos) /*!< 0x10000000 */ +#define RCC_CR_PLL3ON RCC_CR_PLL3ON_Msk /*!< PLL3 enable */ +#define RCC_CR_PLL3RDY_Pos (29U) +#define RCC_CR_PLL3RDY_Msk (0x1UL << RCC_CR_PLL3RDY_Pos) /*!< 0x20000000 */ +#define RCC_CR_PLL3RDY RCC_CR_PLL3RDY_Msk /*!< PLL3 clock ready flag */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_PREDIV1 0x00000000U /*!< PREDIV1 clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_PREDIV1_DIV2 0x00020000U /*!< PREDIV1 clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock * 4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock * 5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock * 6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock * 7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock * 8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock * 9 */ +#define RCC_CFGR_PLLMULL6_5 0x00340000U /*!< PLL input clock * 6.5 */ + +#define RCC_CFGR_OTGFSPRE_Pos (22U) +#define RCC_CFGR_OTGFSPRE_Msk (0x1UL << RCC_CFGR_OTGFSPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_OTGFSPRE RCC_CFGR_OTGFSPRE_Msk /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0xFUL << RCC_CFGR_MCO_Pos) /*!< 0x0F000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[3:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCO_3 (0x8UL << RCC_CFGR_MCO_Pos) /*!< 0x08000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ +#define RCC_CFGR_MCO_PLL2CLK 0x08000000U /*!< PLL2 clock selected as MCO source*/ +#define RCC_CFGR_MCO_PLL3CLK_DIV2 0x09000000U /*!< PLL3 clock divided by 2 selected as MCO source*/ +#define RCC_CFGR_MCO_EXT_HSE 0x0A000000U /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ +#define RCC_CFGR_MCO_PLL3CLK 0x0B000000U /*!< PLL3 clock selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_3 RCC_CFGR_MCO_3 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + #define RCC_CFGR_MCOSEL_PLL2 RCC_CFGR_MCO_PLL2CLK + #define RCC_CFGR_MCOSEL_PLL3_DIV2 RCC_CFGR_MCO_PLL3CLK_DIV2 + #define RCC_CFGR_MCOSEL_EXT_HSE RCC_CFGR_MCO_EXT_HSE + #define RCC_CFGR_MCOSEL_PLL3CLK RCC_CFGR_MCO_PLL3CLK + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + +#define RCC_CIR_PLL2RDYF_Pos (5U) +#define RCC_CIR_PLL2RDYF_Msk (0x1UL << RCC_CIR_PLL2RDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIR_PLL2RDYF RCC_CIR_PLL2RDYF_Msk /*!< PLL2 Ready Interrupt flag */ +#define RCC_CIR_PLL3RDYF_Pos (6U) +#define RCC_CIR_PLL3RDYF_Msk (0x1UL << RCC_CIR_PLL3RDYF_Pos) /*!< 0x00000040 */ +#define RCC_CIR_PLL3RDYF RCC_CIR_PLL3RDYF_Msk /*!< PLL3 Ready Interrupt flag */ +#define RCC_CIR_PLL2RDYIE_Pos (13U) +#define RCC_CIR_PLL2RDYIE_Msk (0x1UL << RCC_CIR_PLL2RDYIE_Pos) /*!< 0x00002000 */ +#define RCC_CIR_PLL2RDYIE RCC_CIR_PLL2RDYIE_Msk /*!< PLL2 Ready Interrupt Enable */ +#define RCC_CIR_PLL3RDYIE_Pos (14U) +#define RCC_CIR_PLL3RDYIE_Msk (0x1UL << RCC_CIR_PLL3RDYIE_Pos) /*!< 0x00004000 */ +#define RCC_CIR_PLL3RDYIE RCC_CIR_PLL3RDYIE_Msk /*!< PLL3 Ready Interrupt Enable */ +#define RCC_CIR_PLL2RDYC_Pos (21U) +#define RCC_CIR_PLL2RDYC_Msk (0x1UL << RCC_CIR_PLL2RDYC_Pos) /*!< 0x00200000 */ +#define RCC_CIR_PLL2RDYC RCC_CIR_PLL2RDYC_Msk /*!< PLL2 Ready Interrupt Clear */ +#define RCC_CIR_PLL3RDYC_Pos (22U) +#define RCC_CIR_PLL3RDYC_Msk (0x1UL << RCC_CIR_PLL3RDYC_Pos) /*!< 0x00400000 */ +#define RCC_CIR_PLL3RDYC RCC_CIR_PLL3RDYC_Msk /*!< PLL3 Ready Interrupt Clear */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + + +#define RCC_APB1RSTR_CAN2RST_Pos (26U) +#define RCC_APB1RSTR_CAN2RST_Msk (0x1UL << RCC_APB1RSTR_CAN2RST_Pos) /*!< 0x04000000 */ +#define RCC_APB1RSTR_CAN2RST RCC_APB1RSTR_CAN2RST_Msk /*!< CAN2 reset */ + +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + + +#define RCC_AHBENR_OTGFSEN_Pos (12U) +#define RCC_AHBENR_OTGFSEN_Msk (0x1UL << RCC_AHBENR_OTGFSEN_Pos) /*!< 0x00001000 */ +#define RCC_AHBENR_OTGFSEN RCC_AHBENR_OTGFSEN_Msk /*!< USB OTG FS clock enable */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + + +#define RCC_APB1ENR_CAN2EN_Pos (26U) +#define RCC_APB1ENR_CAN2EN_Msk (0x1UL << RCC_APB1ENR_CAN2EN_Pos) /*!< 0x04000000 */ +#define RCC_APB1ENR_CAN2EN RCC_APB1ENR_CAN2EN_Msk /*!< CAN2 clock enable */ + +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + +/******************* Bit definition for RCC_AHBRSTR register ****************/ +#define RCC_AHBRSTR_OTGFSRST_Pos (12U) +#define RCC_AHBRSTR_OTGFSRST_Msk (0x1UL << RCC_AHBRSTR_OTGFSRST_Pos) /*!< 0x00001000 */ +#define RCC_AHBRSTR_OTGFSRST RCC_AHBRSTR_OTGFSRST_Msk /*!< USB OTG FS reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ +#define RCC_CFGR2_PREDIV1_Pos (0U) +#define RCC_CFGR2_PREDIV1_Msk (0xFUL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1 RCC_CFGR2_PREDIV1_Msk /*!< PREDIV1[3:0] bits */ +#define RCC_CFGR2_PREDIV1_0 (0x1UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_1 (0x2UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_2 (0x4UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_3 (0x8UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR2_PREDIV1_DIV1 0x00000000U /*!< PREDIV1 input clock not divided */ +#define RCC_CFGR2_PREDIV1_DIV2_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV2_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV2_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_DIV2 RCC_CFGR2_PREDIV1_DIV2_Msk /*!< PREDIV1 input clock divided by 2 */ +#define RCC_CFGR2_PREDIV1_DIV3_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV3_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV3_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_DIV3 RCC_CFGR2_PREDIV1_DIV3_Msk /*!< PREDIV1 input clock divided by 3 */ +#define RCC_CFGR2_PREDIV1_DIV4_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV4_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV4_Pos) /*!< 0x00000003 */ +#define RCC_CFGR2_PREDIV1_DIV4 RCC_CFGR2_PREDIV1_DIV4_Msk /*!< PREDIV1 input clock divided by 4 */ +#define RCC_CFGR2_PREDIV1_DIV5_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV5_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV5_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_DIV5 RCC_CFGR2_PREDIV1_DIV5_Msk /*!< PREDIV1 input clock divided by 5 */ +#define RCC_CFGR2_PREDIV1_DIV6_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV6_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV6_Pos) /*!< 0x00000005 */ +#define RCC_CFGR2_PREDIV1_DIV6 RCC_CFGR2_PREDIV1_DIV6_Msk /*!< PREDIV1 input clock divided by 6 */ +#define RCC_CFGR2_PREDIV1_DIV7_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV7_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV7_Pos) /*!< 0x00000006 */ +#define RCC_CFGR2_PREDIV1_DIV7 RCC_CFGR2_PREDIV1_DIV7_Msk /*!< PREDIV1 input clock divided by 7 */ +#define RCC_CFGR2_PREDIV1_DIV8_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV8_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV8_Pos) /*!< 0x00000007 */ +#define RCC_CFGR2_PREDIV1_DIV8 RCC_CFGR2_PREDIV1_DIV8_Msk /*!< PREDIV1 input clock divided by 8 */ +#define RCC_CFGR2_PREDIV1_DIV9_Pos (3U) +#define RCC_CFGR2_PREDIV1_DIV9_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV9_Pos) /*!< 0x00000008 */ +#define RCC_CFGR2_PREDIV1_DIV9 RCC_CFGR2_PREDIV1_DIV9_Msk /*!< PREDIV1 input clock divided by 9 */ +#define RCC_CFGR2_PREDIV1_DIV10_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV10_Msk (0x9UL << RCC_CFGR2_PREDIV1_DIV10_Pos) /*!< 0x00000009 */ +#define RCC_CFGR2_PREDIV1_DIV10 RCC_CFGR2_PREDIV1_DIV10_Msk /*!< PREDIV1 input clock divided by 10 */ +#define RCC_CFGR2_PREDIV1_DIV11_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV11_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV11_Pos) /*!< 0x0000000A */ +#define RCC_CFGR2_PREDIV1_DIV11 RCC_CFGR2_PREDIV1_DIV11_Msk /*!< PREDIV1 input clock divided by 11 */ +#define RCC_CFGR2_PREDIV1_DIV12_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV12_Msk (0xBUL << RCC_CFGR2_PREDIV1_DIV12_Pos) /*!< 0x0000000B */ +#define RCC_CFGR2_PREDIV1_DIV12 RCC_CFGR2_PREDIV1_DIV12_Msk /*!< PREDIV1 input clock divided by 12 */ +#define RCC_CFGR2_PREDIV1_DIV13_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV13_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV13_Pos) /*!< 0x0000000C */ +#define RCC_CFGR2_PREDIV1_DIV13 RCC_CFGR2_PREDIV1_DIV13_Msk /*!< PREDIV1 input clock divided by 13 */ +#define RCC_CFGR2_PREDIV1_DIV14_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV14_Msk (0xDUL << RCC_CFGR2_PREDIV1_DIV14_Pos) /*!< 0x0000000D */ +#define RCC_CFGR2_PREDIV1_DIV14 RCC_CFGR2_PREDIV1_DIV14_Msk /*!< PREDIV1 input clock divided by 14 */ +#define RCC_CFGR2_PREDIV1_DIV15_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV15_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV15_Pos) /*!< 0x0000000E */ +#define RCC_CFGR2_PREDIV1_DIV15 RCC_CFGR2_PREDIV1_DIV15_Msk /*!< PREDIV1 input clock divided by 15 */ +#define RCC_CFGR2_PREDIV1_DIV16_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV16_Msk (0xFUL << RCC_CFGR2_PREDIV1_DIV16_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1_DIV16 RCC_CFGR2_PREDIV1_DIV16_Msk /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ +#define RCC_CFGR2_PREDIV2_Pos (4U) +#define RCC_CFGR2_PREDIV2_Msk (0xFUL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR2_PREDIV2 RCC_CFGR2_PREDIV2_Msk /*!< PREDIV2[3:0] bits */ +#define RCC_CFGR2_PREDIV2_0 (0x1UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000010 */ +#define RCC_CFGR2_PREDIV2_1 (0x2UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000020 */ +#define RCC_CFGR2_PREDIV2_2 (0x4UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000040 */ +#define RCC_CFGR2_PREDIV2_3 (0x8UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR2_PREDIV2_DIV1 0x00000000U /*!< PREDIV2 input clock not divided */ +#define RCC_CFGR2_PREDIV2_DIV2_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV2_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV2_Pos) /*!< 0x00000010 */ +#define RCC_CFGR2_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2_Msk /*!< PREDIV2 input clock divided by 2 */ +#define RCC_CFGR2_PREDIV2_DIV3_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV3_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV3_Pos) /*!< 0x00000020 */ +#define RCC_CFGR2_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3_Msk /*!< PREDIV2 input clock divided by 3 */ +#define RCC_CFGR2_PREDIV2_DIV4_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV4_Msk (0x3UL << RCC_CFGR2_PREDIV2_DIV4_Pos) /*!< 0x00000030 */ +#define RCC_CFGR2_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4_Msk /*!< PREDIV2 input clock divided by 4 */ +#define RCC_CFGR2_PREDIV2_DIV5_Pos (6U) +#define RCC_CFGR2_PREDIV2_DIV5_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV5_Pos) /*!< 0x00000040 */ +#define RCC_CFGR2_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5_Msk /*!< PREDIV2 input clock divided by 5 */ +#define RCC_CFGR2_PREDIV2_DIV6_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV6_Msk (0x5UL << RCC_CFGR2_PREDIV2_DIV6_Pos) /*!< 0x00000050 */ +#define RCC_CFGR2_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6_Msk /*!< PREDIV2 input clock divided by 6 */ +#define RCC_CFGR2_PREDIV2_DIV7_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV7_Msk (0x3UL << RCC_CFGR2_PREDIV2_DIV7_Pos) /*!< 0x00000060 */ +#define RCC_CFGR2_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7_Msk /*!< PREDIV2 input clock divided by 7 */ +#define RCC_CFGR2_PREDIV2_DIV8_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV8_Msk (0x7UL << RCC_CFGR2_PREDIV2_DIV8_Pos) /*!< 0x00000070 */ +#define RCC_CFGR2_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8_Msk /*!< PREDIV2 input clock divided by 8 */ +#define RCC_CFGR2_PREDIV2_DIV9_Pos (7U) +#define RCC_CFGR2_PREDIV2_DIV9_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV9_Pos) /*!< 0x00000080 */ +#define RCC_CFGR2_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9_Msk /*!< PREDIV2 input clock divided by 9 */ +#define RCC_CFGR2_PREDIV2_DIV10_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV10_Msk (0x9UL << RCC_CFGR2_PREDIV2_DIV10_Pos) /*!< 0x00000090 */ +#define RCC_CFGR2_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10_Msk /*!< PREDIV2 input clock divided by 10 */ +#define RCC_CFGR2_PREDIV2_DIV11_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV11_Msk (0x5UL << RCC_CFGR2_PREDIV2_DIV11_Pos) /*!< 0x000000A0 */ +#define RCC_CFGR2_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11_Msk /*!< PREDIV2 input clock divided by 11 */ +#define RCC_CFGR2_PREDIV2_DIV12_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV12_Msk (0xBUL << RCC_CFGR2_PREDIV2_DIV12_Pos) /*!< 0x000000B0 */ +#define RCC_CFGR2_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12_Msk /*!< PREDIV2 input clock divided by 12 */ +#define RCC_CFGR2_PREDIV2_DIV13_Pos (6U) +#define RCC_CFGR2_PREDIV2_DIV13_Msk (0x3UL << RCC_CFGR2_PREDIV2_DIV13_Pos) /*!< 0x000000C0 */ +#define RCC_CFGR2_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13_Msk /*!< PREDIV2 input clock divided by 13 */ +#define RCC_CFGR2_PREDIV2_DIV14_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV14_Msk (0xDUL << RCC_CFGR2_PREDIV2_DIV14_Pos) /*!< 0x000000D0 */ +#define RCC_CFGR2_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14_Msk /*!< PREDIV2 input clock divided by 14 */ +#define RCC_CFGR2_PREDIV2_DIV15_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV15_Msk (0x7UL << RCC_CFGR2_PREDIV2_DIV15_Pos) /*!< 0x000000E0 */ +#define RCC_CFGR2_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15_Msk /*!< PREDIV2 input clock divided by 15 */ +#define RCC_CFGR2_PREDIV2_DIV16_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV16_Msk (0xFUL << RCC_CFGR2_PREDIV2_DIV16_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR2_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16_Msk /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ +#define RCC_CFGR2_PLL2MUL_Pos (8U) +#define RCC_CFGR2_PLL2MUL_Msk (0xFUL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000F00 */ +#define RCC_CFGR2_PLL2MUL RCC_CFGR2_PLL2MUL_Msk /*!< PLL2MUL[3:0] bits */ +#define RCC_CFGR2_PLL2MUL_0 (0x1UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000100 */ +#define RCC_CFGR2_PLL2MUL_1 (0x2UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000200 */ +#define RCC_CFGR2_PLL2MUL_2 (0x4UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000400 */ +#define RCC_CFGR2_PLL2MUL_3 (0x8UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000800 */ + +#define RCC_CFGR2_PLL2MUL8_Pos (9U) +#define RCC_CFGR2_PLL2MUL8_Msk (0x3UL << RCC_CFGR2_PLL2MUL8_Pos) /*!< 0x00000600 */ +#define RCC_CFGR2_PLL2MUL8 RCC_CFGR2_PLL2MUL8_Msk /*!< PLL2 input clock * 8 */ +#define RCC_CFGR2_PLL2MUL9_Pos (8U) +#define RCC_CFGR2_PLL2MUL9_Msk (0x7UL << RCC_CFGR2_PLL2MUL9_Pos) /*!< 0x00000700 */ +#define RCC_CFGR2_PLL2MUL9 RCC_CFGR2_PLL2MUL9_Msk /*!< PLL2 input clock * 9 */ +#define RCC_CFGR2_PLL2MUL10_Pos (11U) +#define RCC_CFGR2_PLL2MUL10_Msk (0x1UL << RCC_CFGR2_PLL2MUL10_Pos) /*!< 0x00000800 */ +#define RCC_CFGR2_PLL2MUL10 RCC_CFGR2_PLL2MUL10_Msk /*!< PLL2 input clock * 10 */ +#define RCC_CFGR2_PLL2MUL11_Pos (8U) +#define RCC_CFGR2_PLL2MUL11_Msk (0x9UL << RCC_CFGR2_PLL2MUL11_Pos) /*!< 0x00000900 */ +#define RCC_CFGR2_PLL2MUL11 RCC_CFGR2_PLL2MUL11_Msk /*!< PLL2 input clock * 11 */ +#define RCC_CFGR2_PLL2MUL12_Pos (9U) +#define RCC_CFGR2_PLL2MUL12_Msk (0x5UL << RCC_CFGR2_PLL2MUL12_Pos) /*!< 0x00000A00 */ +#define RCC_CFGR2_PLL2MUL12 RCC_CFGR2_PLL2MUL12_Msk /*!< PLL2 input clock * 12 */ +#define RCC_CFGR2_PLL2MUL13_Pos (8U) +#define RCC_CFGR2_PLL2MUL13_Msk (0xBUL << RCC_CFGR2_PLL2MUL13_Pos) /*!< 0x00000B00 */ +#define RCC_CFGR2_PLL2MUL13 RCC_CFGR2_PLL2MUL13_Msk /*!< PLL2 input clock * 13 */ +#define RCC_CFGR2_PLL2MUL14_Pos (10U) +#define RCC_CFGR2_PLL2MUL14_Msk (0x3UL << RCC_CFGR2_PLL2MUL14_Pos) /*!< 0x00000C00 */ +#define RCC_CFGR2_PLL2MUL14 RCC_CFGR2_PLL2MUL14_Msk /*!< PLL2 input clock * 14 */ +#define RCC_CFGR2_PLL2MUL16_Pos (9U) +#define RCC_CFGR2_PLL2MUL16_Msk (0x7UL << RCC_CFGR2_PLL2MUL16_Pos) /*!< 0x00000E00 */ +#define RCC_CFGR2_PLL2MUL16 RCC_CFGR2_PLL2MUL16_Msk /*!< PLL2 input clock * 16 */ +#define RCC_CFGR2_PLL2MUL20_Pos (8U) +#define RCC_CFGR2_PLL2MUL20_Msk (0xFUL << RCC_CFGR2_PLL2MUL20_Pos) /*!< 0x00000F00 */ +#define RCC_CFGR2_PLL2MUL20 RCC_CFGR2_PLL2MUL20_Msk /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ +#define RCC_CFGR2_PLL3MUL_Pos (12U) +#define RCC_CFGR2_PLL3MUL_Msk (0xFUL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x0000F000 */ +#define RCC_CFGR2_PLL3MUL RCC_CFGR2_PLL3MUL_Msk /*!< PLL3MUL[3:0] bits */ +#define RCC_CFGR2_PLL3MUL_0 (0x1UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00001000 */ +#define RCC_CFGR2_PLL3MUL_1 (0x2UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00002000 */ +#define RCC_CFGR2_PLL3MUL_2 (0x4UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00004000 */ +#define RCC_CFGR2_PLL3MUL_3 (0x8UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR2_PLL3MUL8_Pos (13U) +#define RCC_CFGR2_PLL3MUL8_Msk (0x3UL << RCC_CFGR2_PLL3MUL8_Pos) /*!< 0x00006000 */ +#define RCC_CFGR2_PLL3MUL8 RCC_CFGR2_PLL3MUL8_Msk /*!< PLL3 input clock * 8 */ +#define RCC_CFGR2_PLL3MUL9_Pos (12U) +#define RCC_CFGR2_PLL3MUL9_Msk (0x7UL << RCC_CFGR2_PLL3MUL9_Pos) /*!< 0x00007000 */ +#define RCC_CFGR2_PLL3MUL9 RCC_CFGR2_PLL3MUL9_Msk /*!< PLL3 input clock * 9 */ +#define RCC_CFGR2_PLL3MUL10_Pos (15U) +#define RCC_CFGR2_PLL3MUL10_Msk (0x1UL << RCC_CFGR2_PLL3MUL10_Pos) /*!< 0x00008000 */ +#define RCC_CFGR2_PLL3MUL10 RCC_CFGR2_PLL3MUL10_Msk /*!< PLL3 input clock * 10 */ +#define RCC_CFGR2_PLL3MUL11_Pos (12U) +#define RCC_CFGR2_PLL3MUL11_Msk (0x9UL << RCC_CFGR2_PLL3MUL11_Pos) /*!< 0x00009000 */ +#define RCC_CFGR2_PLL3MUL11 RCC_CFGR2_PLL3MUL11_Msk /*!< PLL3 input clock * 11 */ +#define RCC_CFGR2_PLL3MUL12_Pos (13U) +#define RCC_CFGR2_PLL3MUL12_Msk (0x5UL << RCC_CFGR2_PLL3MUL12_Pos) /*!< 0x0000A000 */ +#define RCC_CFGR2_PLL3MUL12 RCC_CFGR2_PLL3MUL12_Msk /*!< PLL3 input clock * 12 */ +#define RCC_CFGR2_PLL3MUL13_Pos (12U) +#define RCC_CFGR2_PLL3MUL13_Msk (0xBUL << RCC_CFGR2_PLL3MUL13_Pos) /*!< 0x0000B000 */ +#define RCC_CFGR2_PLL3MUL13 RCC_CFGR2_PLL3MUL13_Msk /*!< PLL3 input clock * 13 */ +#define RCC_CFGR2_PLL3MUL14_Pos (14U) +#define RCC_CFGR2_PLL3MUL14_Msk (0x3UL << RCC_CFGR2_PLL3MUL14_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR2_PLL3MUL14 RCC_CFGR2_PLL3MUL14_Msk /*!< PLL3 input clock * 14 */ +#define RCC_CFGR2_PLL3MUL16_Pos (13U) +#define RCC_CFGR2_PLL3MUL16_Msk (0x7UL << RCC_CFGR2_PLL3MUL16_Pos) /*!< 0x0000E000 */ +#define RCC_CFGR2_PLL3MUL16 RCC_CFGR2_PLL3MUL16_Msk /*!< PLL3 input clock * 16 */ +#define RCC_CFGR2_PLL3MUL20_Pos (12U) +#define RCC_CFGR2_PLL3MUL20_Msk (0xFUL << RCC_CFGR2_PLL3MUL20_Pos) /*!< 0x0000F000 */ +#define RCC_CFGR2_PLL3MUL20 RCC_CFGR2_PLL3MUL20_Msk /*!< PLL3 input clock * 20 */ + +#define RCC_CFGR2_PREDIV1SRC_Pos (16U) +#define RCC_CFGR2_PREDIV1SRC_Msk (0x1UL << RCC_CFGR2_PREDIV1SRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR2_PREDIV1SRC RCC_CFGR2_PREDIV1SRC_Msk /*!< PREDIV1 entry clock source */ +#define RCC_CFGR2_PREDIV1SRC_PLL2_Pos (16U) +#define RCC_CFGR2_PREDIV1SRC_PLL2_Msk (0x1UL << RCC_CFGR2_PREDIV1SRC_PLL2_Pos) /*!< 0x00010000 */ +#define RCC_CFGR2_PREDIV1SRC_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2_Msk /*!< PLL2 selected as PREDIV1 entry clock source */ +#define RCC_CFGR2_PREDIV1SRC_HSE 0x00000000U /*!< HSE selected as PREDIV1 entry clock source */ +#define RCC_CFGR2_I2S2SRC_Pos (17U) +#define RCC_CFGR2_I2S2SRC_Msk (0x1UL << RCC_CFGR2_I2S2SRC_Pos) /*!< 0x00020000 */ +#define RCC_CFGR2_I2S2SRC RCC_CFGR2_I2S2SRC_Msk /*!< I2S2 entry clock source */ +#define RCC_CFGR2_I2S3SRC_Pos (18U) +#define RCC_CFGR2_I2S3SRC_Msk (0x1UL << RCC_CFGR2_I2S3SRC_Pos) /*!< 0x00040000 */ +#define RCC_CFGR2_I2S3SRC RCC_CFGR2_I2S3SRC_Msk /*!< I2S3 clock source */ + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + +/*!< ETH_REMAP configuration */ +#define AFIO_MAPR_ETH_REMAP_Pos (21U) +#define AFIO_MAPR_ETH_REMAP_Msk (0x1UL << AFIO_MAPR_ETH_REMAP_Pos) /*!< 0x00200000 */ +#define AFIO_MAPR_ETH_REMAP AFIO_MAPR_ETH_REMAP_Msk /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ +#define AFIO_MAPR_CAN2_REMAP_Pos (22U) +#define AFIO_MAPR_CAN2_REMAP_Msk (0x1UL << AFIO_MAPR_CAN2_REMAP_Pos) /*!< 0x00400000 */ +#define AFIO_MAPR_CAN2_REMAP AFIO_MAPR_CAN2_REMAP_Msk /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ +#define AFIO_MAPR_MII_RMII_SEL_Pos (23U) +#define AFIO_MAPR_MII_RMII_SEL_Msk (0x1UL << AFIO_MAPR_MII_RMII_SEL_Pos) /*!< 0x00800000 */ +#define AFIO_MAPR_MII_RMII_SEL AFIO_MAPR_MII_RMII_SEL_Msk /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ +#define AFIO_MAPR_SPI3_REMAP_Pos (28U) +#define AFIO_MAPR_SPI3_REMAP_Msk (0x1UL << AFIO_MAPR_SPI3_REMAP_Pos) /*!< 0x10000000 */ +#define AFIO_MAPR_SPI3_REMAP AFIO_MAPR_SPI3_REMAP_Msk /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ +#define AFIO_MAPR_TIM2ITR1_IREMAP_Pos (29U) +#define AFIO_MAPR_TIM2ITR1_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM2ITR1_IREMAP_Pos) /*!< 0x20000000 */ +#define AFIO_MAPR_TIM2ITR1_IREMAP AFIO_MAPR_TIM2ITR1_IREMAP_Msk /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ +#define AFIO_MAPR_PTP_PPS_REMAP_Pos (30U) +#define AFIO_MAPR_PTP_PPS_REMAP_Msk (0x1UL << AFIO_MAPR_PTP_PPS_REMAP_Pos) /*!< 0x40000000 */ +#define AFIO_MAPR_PTP_PPS_REMAP AFIO_MAPR_PTP_PPS_REMAP_Msk /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19_Pos (19U) +#define EXTI_IMR_MR19_Msk (0x1UL << EXTI_IMR_MR19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR_MR19 EXTI_IMR_MR19_Msk /*!< Interrupt Mask on line 19 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM19 EXTI_IMR_MR19 +#define EXTI_IMR_IM 0x000FFFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19_Pos (19U) +#define EXTI_EMR_MR19_Msk (0x1UL << EXTI_EMR_MR19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR_MR19 EXTI_EMR_MR19_Msk /*!< Event Mask on line 19 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 +#define EXTI_EMR_EM19 EXTI_EMR_MR19 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19_Pos (19U) +#define EXTI_RTSR_TR19_Msk (0x1UL << EXTI_RTSR_TR19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR_TR19 EXTI_RTSR_TR19_Msk /*!< Rising trigger event configuration bit of line 19 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 +#define EXTI_RTSR_RT19 EXTI_RTSR_TR19 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19_Pos (19U) +#define EXTI_FTSR_TR19_Msk (0x1UL << EXTI_FTSR_TR19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR_TR19 EXTI_FTSR_TR19_Msk /*!< Falling trigger event configuration bit of line 19 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 +#define EXTI_FTSR_FT19 EXTI_FTSR_TR19 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19_Pos (19U) +#define EXTI_SWIER_SWIER19_Msk (0x1UL << EXTI_SWIER_SWIER19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER_SWIER19 EXTI_SWIER_SWIER19_Msk /*!< Software Interrupt on line 19 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 +#define EXTI_SWIER_SWI19 EXTI_SWIER_SWIER19 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19_Pos (19U) +#define EXTI_PR_PR19_Msk (0x1UL << EXTI_PR_PR19_Pos) /*!< 0x00080000 */ +#define EXTI_PR_PR19 EXTI_PR_PR19_Msk /*!< Pending bit for line 19 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 +#define EXTI_PR_PIF19 EXTI_PR_PR19 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f107xc + * @{ + */ + +#ifndef __STM32F107xC_H +#define __STM32F107xC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; + uint32_t RESERVED13[2]; + __IO uint32_t DR11; + __IO uint32_t DR12; + __IO uint32_t DR13; + __IO uint32_t DR14; + __IO uint32_t DR15; + __IO uint32_t DR16; + __IO uint32_t DR17; + __IO uint32_t DR18; + __IO uint32_t DR19; + __IO uint32_t DR20; + __IO uint32_t DR21; + __IO uint32_t DR22; + __IO uint32_t DR23; + __IO uint32_t DR24; + __IO uint32_t DR25; + __IO uint32_t DR26; + __IO uint32_t DR27; + __IO uint32_t DR28; + __IO uint32_t DR29; + __IO uint32_t DR30; + __IO uint32_t DR31; + __IO uint32_t DR32; + __IO uint32_t DR33; + __IO uint32_t DR34; + __IO uint32_t DR35; + __IO uint32_t DR36; + __IO uint32_t DR37; + __IO uint32_t DR38; + __IO uint32_t DR39; + __IO uint32_t DR40; + __IO uint32_t DR41; + __IO uint32_t DR42; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[28]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; + __IO uint32_t I2SPR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + + +/** + * @brief __USB_OTG_Core_register + */ + +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset: 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset: 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset: 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset: 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset: 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset: 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset: 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset: 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset: 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register Address offset: 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset: 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset: 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h*/ + __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset: 038h */ + __IO uint32_t CID; /*!< User ID Register Address offset: 03Ch */ + uint32_t Reserved40[48]; /*!< Reserved 040h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset: 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 0x104 */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief __device_Registers + */ + +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register Address offset: 800h*/ + __IO uint32_t DCTL; /*!< dev Control Register Address offset: 804h*/ + __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset: 808h*/ + uint32_t Reserved0C; /*!< Reserved 80Ch*/ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset: 810h*/ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset: 814h*/ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset: 818h*/ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset: 81Ch*/ + uint32_t Reserved20; /*!< Reserved 820h*/ + uint32_t Reserved9; /*!< Reserved 824h*/ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset: 828h*/ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset: 82Ch*/ + __IO uint32_t DTHRCTL; /*!< dev thr Address offset: 830h*/ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset: 834h*/ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset: 838h*/ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ + uint32_t Reserved40; /*!< dedicated EP mask Address offset: 840h*/ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset: 844h*/ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch*/ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset: 884h*/ +} USB_OTG_DeviceTypeDef; + +/** + * @brief __IN_Endpoint-Specific_Register + */ + +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h*/ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief __OUT_Endpoint-Specific_Registers + */ + +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h*/ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief __Host_Mode_Register_Structures + */ + +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h*/ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h*/ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h*/ + uint32_t Reserved40C; /*!< Reserved 40Ch*/ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h*/ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h*/ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h*/ +} USB_OTG_HostTypeDef; + +/** + * @brief __Host_Channel_Specific_Registers + */ + +typedef struct +{ + __IO uint32_t HCCHAR; + __IO uint32_t HCSPLT; + __IO uint32_t HCINT; + __IO uint32_t HCINTMSK; + __IO uint32_t HCTSIZ; + __IO uint32_t HCDMA; + uint32_t Reserved[2]; +} USB_OTG_HostChannelTypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0803FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define CAN2_BASE (APB1PERIPH_BASE + 0x00006800UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400UL) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x00000408UL) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x0000041CUL) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x00000430UL) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x00000444UL) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x00000458UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x00008000UL) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x00000100UL) +#define ETH_PTP_BASE (ETH_BASE + 0x00000700UL) +#define ETH_DMA_BASE (ETH_BASE + 0x00001000UL) + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + + +/*!< USB registers base address */ +#define USB_OTG_FS_PERIPH_BASE 0x50000000UL + +#define USB_OTG_GLOBAL_BASE 0x00000000UL +#define USB_OTG_DEVICE_BASE 0x00000800UL +#define USB_OTG_IN_ENDPOINT_BASE 0x00000900UL +#define USB_OTG_OUT_ENDPOINT_BASE 0x00000B00UL +#define USB_OTG_EP_REG_SIZE 0x00000020UL +#define USB_OTG_HOST_BASE 0x00000400UL +#define USB_OTG_HOST_PORT_BASE 0x00000440UL +#define USB_OTG_HOST_CHANNEL_BASE 0x00000500UL +#define USB_OTG_HOST_CHANNEL_SIZE 0x00000020UL +#define USB_OTG_PCGCCTL_BASE 0x00000E00UL +#define USB_OTG_FIFO_BASE 0x00001000UL +#define USB_OTG_FIFO_SIZE 0x00001000UL + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define TIM6 ((TIM_TypeDef *)TIM6_BASE) +#define TIM7 ((TIM_TypeDef *)TIM7_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define SPI3 ((SPI_TypeDef *)SPI3_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define UART5 ((USART_TypeDef *)UART5_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define CAN2 ((CAN_TypeDef *)CAN2_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define DAC1 ((DAC_TypeDef *)DAC_BASE) +#define DAC ((DAC_TypeDef *)DAC_BASE) /* Kept for legacy purpose */ +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA2 ((DMA_TypeDef *)DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *)DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *)DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *)DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *)DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *)DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *)USB_OTG_FS_PERIPH_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 85U /*!< LSI Maximum startup time in us */ + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D_Pos (0U) +#define BKP_DR11_D_Msk (0xFFFFUL << BKP_DR11_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR11_D BKP_DR11_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D_Pos (0U) +#define BKP_DR12_D_Msk (0xFFFFUL << BKP_DR12_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR12_D BKP_DR12_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D_Pos (0U) +#define BKP_DR13_D_Msk (0xFFFFUL << BKP_DR13_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR13_D BKP_DR13_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D_Pos (0U) +#define BKP_DR14_D_Msk (0xFFFFUL << BKP_DR14_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR14_D BKP_DR14_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D_Pos (0U) +#define BKP_DR15_D_Msk (0xFFFFUL << BKP_DR15_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR15_D BKP_DR15_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D_Pos (0U) +#define BKP_DR16_D_Msk (0xFFFFUL << BKP_DR16_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR16_D BKP_DR16_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D_Pos (0U) +#define BKP_DR17_D_Msk (0xFFFFUL << BKP_DR17_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR17_D BKP_DR17_D_Msk /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D_Pos (0U) +#define BKP_DR18_D_Msk (0xFFFFUL << BKP_DR18_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR18_D BKP_DR18_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D_Pos (0U) +#define BKP_DR19_D_Msk (0xFFFFUL << BKP_DR19_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR19_D BKP_DR19_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D_Pos (0U) +#define BKP_DR20_D_Msk (0xFFFFUL << BKP_DR20_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR20_D BKP_DR20_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D_Pos (0U) +#define BKP_DR21_D_Msk (0xFFFFUL << BKP_DR21_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR21_D BKP_DR21_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D_Pos (0U) +#define BKP_DR22_D_Msk (0xFFFFUL << BKP_DR22_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR22_D BKP_DR22_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D_Pos (0U) +#define BKP_DR23_D_Msk (0xFFFFUL << BKP_DR23_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR23_D BKP_DR23_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D_Pos (0U) +#define BKP_DR24_D_Msk (0xFFFFUL << BKP_DR24_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR24_D BKP_DR24_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D_Pos (0U) +#define BKP_DR25_D_Msk (0xFFFFUL << BKP_DR25_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR25_D BKP_DR25_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D_Pos (0U) +#define BKP_DR26_D_Msk (0xFFFFUL << BKP_DR26_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR26_D BKP_DR26_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D_Pos (0U) +#define BKP_DR27_D_Msk (0xFFFFUL << BKP_DR27_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR27_D BKP_DR27_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D_Pos (0U) +#define BKP_DR28_D_Msk (0xFFFFUL << BKP_DR28_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR28_D BKP_DR28_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D_Pos (0U) +#define BKP_DR29_D_Msk (0xFFFFUL << BKP_DR29_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR29_D BKP_DR29_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D_Pos (0U) +#define BKP_DR30_D_Msk (0xFFFFUL << BKP_DR30_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR30_D BKP_DR30_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D_Pos (0U) +#define BKP_DR31_D_Msk (0xFFFFUL << BKP_DR31_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR31_D BKP_DR31_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D_Pos (0U) +#define BKP_DR32_D_Msk (0xFFFFUL << BKP_DR32_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR32_D BKP_DR32_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D_Pos (0U) +#define BKP_DR33_D_Msk (0xFFFFUL << BKP_DR33_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR33_D BKP_DR33_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D_Pos (0U) +#define BKP_DR34_D_Msk (0xFFFFUL << BKP_DR34_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR34_D BKP_DR34_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D_Pos (0U) +#define BKP_DR35_D_Msk (0xFFFFUL << BKP_DR35_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR35_D BKP_DR35_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D_Pos (0U) +#define BKP_DR36_D_Msk (0xFFFFUL << BKP_DR36_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR36_D BKP_DR36_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D_Pos (0U) +#define BKP_DR37_D_Msk (0xFFFFUL << BKP_DR37_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR37_D BKP_DR37_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D_Pos (0U) +#define BKP_DR38_D_Msk (0xFFFFUL << BKP_DR38_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR38_D BKP_DR38_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D_Pos (0U) +#define BKP_DR39_D_Msk (0xFFFFUL << BKP_DR39_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR39_D BKP_DR39_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D_Pos (0U) +#define BKP_DR40_D_Msk (0xFFFFUL << BKP_DR40_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR40_D BKP_DR40_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D_Pos (0U) +#define BKP_DR41_D_Msk (0xFFFFUL << BKP_DR41_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR41_D BKP_DR41_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D_Pos (0U) +#define BKP_DR42_D_Msk (0xFFFFUL << BKP_DR42_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR42_D BKP_DR42_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 42 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 serie) + */ +#define RCC_PLL2_SUPPORT /*!< Support PLL2 */ +#define RCC_PLLI2S_SUPPORT + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + +#define RCC_CR_PLL2ON_Pos (26U) +#define RCC_CR_PLL2ON_Msk (0x1UL << RCC_CR_PLL2ON_Pos) /*!< 0x04000000 */ +#define RCC_CR_PLL2ON RCC_CR_PLL2ON_Msk /*!< PLL2 enable */ +#define RCC_CR_PLL2RDY_Pos (27U) +#define RCC_CR_PLL2RDY_Msk (0x1UL << RCC_CR_PLL2RDY_Pos) /*!< 0x08000000 */ +#define RCC_CR_PLL2RDY RCC_CR_PLL2RDY_Msk /*!< PLL2 clock ready flag */ + +#define RCC_CR_PLL3ON_Pos (28U) +#define RCC_CR_PLL3ON_Msk (0x1UL << RCC_CR_PLL3ON_Pos) /*!< 0x10000000 */ +#define RCC_CR_PLL3ON RCC_CR_PLL3ON_Msk /*!< PLL3 enable */ +#define RCC_CR_PLL3RDY_Pos (29U) +#define RCC_CR_PLL3RDY_Msk (0x1UL << RCC_CR_PLL3RDY_Pos) /*!< 0x20000000 */ +#define RCC_CR_PLL3RDY RCC_CR_PLL3RDY_Msk /*!< PLL3 clock ready flag */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_PREDIV1 0x00000000U /*!< PREDIV1 clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_PREDIV1_DIV2 0x00020000U /*!< PREDIV1 clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock * 4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock * 5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock * 6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock * 7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock * 8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock * 9 */ +#define RCC_CFGR_PLLMULL6_5 0x00340000U /*!< PLL input clock * 6.5 */ + +#define RCC_CFGR_OTGFSPRE_Pos (22U) +#define RCC_CFGR_OTGFSPRE_Msk (0x1UL << RCC_CFGR_OTGFSPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_OTGFSPRE RCC_CFGR_OTGFSPRE_Msk /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0xFUL << RCC_CFGR_MCO_Pos) /*!< 0x0F000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[3:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCO_3 (0x8UL << RCC_CFGR_MCO_Pos) /*!< 0x08000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ +#define RCC_CFGR_MCO_PLL2CLK 0x08000000U /*!< PLL2 clock selected as MCO source*/ +#define RCC_CFGR_MCO_PLL3CLK_DIV2 0x09000000U /*!< PLL3 clock divided by 2 selected as MCO source*/ +#define RCC_CFGR_MCO_EXT_HSE 0x0A000000U /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ +#define RCC_CFGR_MCO_PLL3CLK 0x0B000000U /*!< PLL3 clock selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_3 RCC_CFGR_MCO_3 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + #define RCC_CFGR_MCOSEL_PLL2 RCC_CFGR_MCO_PLL2CLK + #define RCC_CFGR_MCOSEL_PLL3_DIV2 RCC_CFGR_MCO_PLL3CLK_DIV2 + #define RCC_CFGR_MCOSEL_EXT_HSE RCC_CFGR_MCO_EXT_HSE + #define RCC_CFGR_MCOSEL_PLL3CLK RCC_CFGR_MCO_PLL3CLK + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + +#define RCC_CIR_PLL2RDYF_Pos (5U) +#define RCC_CIR_PLL2RDYF_Msk (0x1UL << RCC_CIR_PLL2RDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIR_PLL2RDYF RCC_CIR_PLL2RDYF_Msk /*!< PLL2 Ready Interrupt flag */ +#define RCC_CIR_PLL3RDYF_Pos (6U) +#define RCC_CIR_PLL3RDYF_Msk (0x1UL << RCC_CIR_PLL3RDYF_Pos) /*!< 0x00000040 */ +#define RCC_CIR_PLL3RDYF RCC_CIR_PLL3RDYF_Msk /*!< PLL3 Ready Interrupt flag */ +#define RCC_CIR_PLL2RDYIE_Pos (13U) +#define RCC_CIR_PLL2RDYIE_Msk (0x1UL << RCC_CIR_PLL2RDYIE_Pos) /*!< 0x00002000 */ +#define RCC_CIR_PLL2RDYIE RCC_CIR_PLL2RDYIE_Msk /*!< PLL2 Ready Interrupt Enable */ +#define RCC_CIR_PLL3RDYIE_Pos (14U) +#define RCC_CIR_PLL3RDYIE_Msk (0x1UL << RCC_CIR_PLL3RDYIE_Pos) /*!< 0x00004000 */ +#define RCC_CIR_PLL3RDYIE RCC_CIR_PLL3RDYIE_Msk /*!< PLL3 Ready Interrupt Enable */ +#define RCC_CIR_PLL2RDYC_Pos (21U) +#define RCC_CIR_PLL2RDYC_Msk (0x1UL << RCC_CIR_PLL2RDYC_Pos) /*!< 0x00200000 */ +#define RCC_CIR_PLL2RDYC RCC_CIR_PLL2RDYC_Msk /*!< PLL2 Ready Interrupt Clear */ +#define RCC_CIR_PLL3RDYC_Pos (22U) +#define RCC_CIR_PLL3RDYC_Msk (0x1UL << RCC_CIR_PLL3RDYC_Pos) /*!< 0x00400000 */ +#define RCC_CIR_PLL3RDYC RCC_CIR_PLL3RDYC_Msk /*!< PLL3 Ready Interrupt Clear */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + + +#define RCC_APB1RSTR_TIM5RST_Pos (3U) +#define RCC_APB1RSTR_TIM5RST_Msk (0x1UL << RCC_APB1RSTR_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR_TIM5RST RCC_APB1RSTR_TIM5RST_Msk /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST_Pos (4U) +#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST_Pos (5U) +#define RCC_APB1RSTR_TIM7RST_Msk (0x1UL << RCC_APB1RSTR_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR_TIM7RST RCC_APB1RSTR_TIM7RST_Msk /*!< Timer 7 reset */ +#define RCC_APB1RSTR_SPI3RST_Pos (15U) +#define RCC_APB1RSTR_SPI3RST_Msk (0x1UL << RCC_APB1RSTR_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR_SPI3RST RCC_APB1RSTR_SPI3RST_Msk /*!< SPI 3 reset */ +#define RCC_APB1RSTR_UART4RST_Pos (19U) +#define RCC_APB1RSTR_UART4RST_Msk (0x1UL << RCC_APB1RSTR_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR_UART4RST RCC_APB1RSTR_UART4RST_Msk /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST_Pos (20U) +#define RCC_APB1RSTR_UART5RST_Msk (0x1UL << RCC_APB1RSTR_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR_UART5RST RCC_APB1RSTR_UART5RST_Msk /*!< UART 5 reset */ + + + +#define RCC_APB1RSTR_CAN2RST_Pos (26U) +#define RCC_APB1RSTR_CAN2RST_Msk (0x1UL << RCC_APB1RSTR_CAN2RST_Pos) /*!< 0x04000000 */ +#define RCC_APB1RSTR_CAN2RST RCC_APB1RSTR_CAN2RST_Msk /*!< CAN2 reset */ + +#define RCC_APB1RSTR_DACRST_Pos (29U) +#define RCC_APB1RSTR_DACRST_Msk (0x1UL << RCC_APB1RSTR_DACRST_Pos) /*!< 0x20000000 */ +#define RCC_APB1RSTR_DACRST RCC_APB1RSTR_DACRST_Msk /*!< DAC interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + +#define RCC_AHBENR_DMA2EN_Pos (1U) +#define RCC_AHBENR_DMA2EN_Msk (0x1UL << RCC_AHBENR_DMA2EN_Pos) /*!< 0x00000002 */ +#define RCC_AHBENR_DMA2EN RCC_AHBENR_DMA2EN_Msk /*!< DMA2 clock enable */ + + +#define RCC_AHBENR_OTGFSEN_Pos (12U) +#define RCC_AHBENR_OTGFSEN_Msk (0x1UL << RCC_AHBENR_OTGFSEN_Pos) /*!< 0x00001000 */ +#define RCC_AHBENR_OTGFSEN RCC_AHBENR_OTGFSEN_Msk /*!< USB OTG FS clock enable */ +#define RCC_AHBENR_ETHMACEN_Pos (14U) +#define RCC_AHBENR_ETHMACEN_Msk (0x1UL << RCC_AHBENR_ETHMACEN_Pos) /*!< 0x00004000 */ +#define RCC_AHBENR_ETHMACEN RCC_AHBENR_ETHMACEN_Msk /*!< ETHERNET MAC clock enable */ +#define RCC_AHBENR_ETHMACTXEN_Pos (15U) +#define RCC_AHBENR_ETHMACTXEN_Msk (0x1UL << RCC_AHBENR_ETHMACTXEN_Pos) /*!< 0x00008000 */ +#define RCC_AHBENR_ETHMACTXEN RCC_AHBENR_ETHMACTXEN_Msk /*!< ETHERNET MAC Tx clock enable */ +#define RCC_AHBENR_ETHMACRXEN_Pos (16U) +#define RCC_AHBENR_ETHMACRXEN_Msk (0x1UL << RCC_AHBENR_ETHMACRXEN_Pos) /*!< 0x00010000 */ +#define RCC_AHBENR_ETHMACRXEN RCC_AHBENR_ETHMACRXEN_Msk /*!< ETHERNET MAC Rx clock enable */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + + +#define RCC_APB1ENR_TIM5EN_Pos (3U) +#define RCC_APB1ENR_TIM5EN_Msk (0x1UL << RCC_APB1ENR_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR_TIM5EN RCC_APB1ENR_TIM5EN_Msk /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN_Pos (4U) +#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN_Pos (5U) +#define RCC_APB1ENR_TIM7EN_Msk (0x1UL << RCC_APB1ENR_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR_TIM7EN RCC_APB1ENR_TIM7EN_Msk /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_SPI3EN_Pos (15U) +#define RCC_APB1ENR_SPI3EN_Msk (0x1UL << RCC_APB1ENR_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR_SPI3EN RCC_APB1ENR_SPI3EN_Msk /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_UART4EN_Pos (19U) +#define RCC_APB1ENR_UART4EN_Msk (0x1UL << RCC_APB1ENR_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR_UART4EN RCC_APB1ENR_UART4EN_Msk /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN_Pos (20U) +#define RCC_APB1ENR_UART5EN_Msk (0x1UL << RCC_APB1ENR_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR_UART5EN RCC_APB1ENR_UART5EN_Msk /*!< UART 5 clock enable */ + + + +#define RCC_APB1ENR_CAN2EN_Pos (26U) +#define RCC_APB1ENR_CAN2EN_Msk (0x1UL << RCC_APB1ENR_CAN2EN_Pos) /*!< 0x04000000 */ +#define RCC_APB1ENR_CAN2EN RCC_APB1ENR_CAN2EN_Msk /*!< CAN2 clock enable */ + +#define RCC_APB1ENR_DACEN_Pos (29U) +#define RCC_APB1ENR_DACEN_Msk (0x1UL << RCC_APB1ENR_DACEN_Pos) /*!< 0x20000000 */ +#define RCC_APB1ENR_DACEN RCC_APB1ENR_DACEN_Msk /*!< DAC interface clock enable */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + +/******************* Bit definition for RCC_AHBRSTR register ****************/ +#define RCC_AHBRSTR_OTGFSRST_Pos (12U) +#define RCC_AHBRSTR_OTGFSRST_Msk (0x1UL << RCC_AHBRSTR_OTGFSRST_Pos) /*!< 0x00001000 */ +#define RCC_AHBRSTR_OTGFSRST RCC_AHBRSTR_OTGFSRST_Msk /*!< USB OTG FS reset */ +#define RCC_AHBRSTR_ETHMACRST_Pos (14U) +#define RCC_AHBRSTR_ETHMACRST_Msk (0x1UL << RCC_AHBRSTR_ETHMACRST_Pos) /*!< 0x00004000 */ +#define RCC_AHBRSTR_ETHMACRST RCC_AHBRSTR_ETHMACRST_Msk /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ +#define RCC_CFGR2_PREDIV1_Pos (0U) +#define RCC_CFGR2_PREDIV1_Msk (0xFUL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1 RCC_CFGR2_PREDIV1_Msk /*!< PREDIV1[3:0] bits */ +#define RCC_CFGR2_PREDIV1_0 (0x1UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_1 (0x2UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_2 (0x4UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_3 (0x8UL << RCC_CFGR2_PREDIV1_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR2_PREDIV1_DIV1 0x00000000U /*!< PREDIV1 input clock not divided */ +#define RCC_CFGR2_PREDIV1_DIV2_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV2_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV2_Pos) /*!< 0x00000001 */ +#define RCC_CFGR2_PREDIV1_DIV2 RCC_CFGR2_PREDIV1_DIV2_Msk /*!< PREDIV1 input clock divided by 2 */ +#define RCC_CFGR2_PREDIV1_DIV3_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV3_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV3_Pos) /*!< 0x00000002 */ +#define RCC_CFGR2_PREDIV1_DIV3 RCC_CFGR2_PREDIV1_DIV3_Msk /*!< PREDIV1 input clock divided by 3 */ +#define RCC_CFGR2_PREDIV1_DIV4_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV4_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV4_Pos) /*!< 0x00000003 */ +#define RCC_CFGR2_PREDIV1_DIV4 RCC_CFGR2_PREDIV1_DIV4_Msk /*!< PREDIV1 input clock divided by 4 */ +#define RCC_CFGR2_PREDIV1_DIV5_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV5_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV5_Pos) /*!< 0x00000004 */ +#define RCC_CFGR2_PREDIV1_DIV5 RCC_CFGR2_PREDIV1_DIV5_Msk /*!< PREDIV1 input clock divided by 5 */ +#define RCC_CFGR2_PREDIV1_DIV6_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV6_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV6_Pos) /*!< 0x00000005 */ +#define RCC_CFGR2_PREDIV1_DIV6 RCC_CFGR2_PREDIV1_DIV6_Msk /*!< PREDIV1 input clock divided by 6 */ +#define RCC_CFGR2_PREDIV1_DIV7_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV7_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV7_Pos) /*!< 0x00000006 */ +#define RCC_CFGR2_PREDIV1_DIV7 RCC_CFGR2_PREDIV1_DIV7_Msk /*!< PREDIV1 input clock divided by 7 */ +#define RCC_CFGR2_PREDIV1_DIV8_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV8_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV8_Pos) /*!< 0x00000007 */ +#define RCC_CFGR2_PREDIV1_DIV8 RCC_CFGR2_PREDIV1_DIV8_Msk /*!< PREDIV1 input clock divided by 8 */ +#define RCC_CFGR2_PREDIV1_DIV9_Pos (3U) +#define RCC_CFGR2_PREDIV1_DIV9_Msk (0x1UL << RCC_CFGR2_PREDIV1_DIV9_Pos) /*!< 0x00000008 */ +#define RCC_CFGR2_PREDIV1_DIV9 RCC_CFGR2_PREDIV1_DIV9_Msk /*!< PREDIV1 input clock divided by 9 */ +#define RCC_CFGR2_PREDIV1_DIV10_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV10_Msk (0x9UL << RCC_CFGR2_PREDIV1_DIV10_Pos) /*!< 0x00000009 */ +#define RCC_CFGR2_PREDIV1_DIV10 RCC_CFGR2_PREDIV1_DIV10_Msk /*!< PREDIV1 input clock divided by 10 */ +#define RCC_CFGR2_PREDIV1_DIV11_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV11_Msk (0x5UL << RCC_CFGR2_PREDIV1_DIV11_Pos) /*!< 0x0000000A */ +#define RCC_CFGR2_PREDIV1_DIV11 RCC_CFGR2_PREDIV1_DIV11_Msk /*!< PREDIV1 input clock divided by 11 */ +#define RCC_CFGR2_PREDIV1_DIV12_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV12_Msk (0xBUL << RCC_CFGR2_PREDIV1_DIV12_Pos) /*!< 0x0000000B */ +#define RCC_CFGR2_PREDIV1_DIV12 RCC_CFGR2_PREDIV1_DIV12_Msk /*!< PREDIV1 input clock divided by 12 */ +#define RCC_CFGR2_PREDIV1_DIV13_Pos (2U) +#define RCC_CFGR2_PREDIV1_DIV13_Msk (0x3UL << RCC_CFGR2_PREDIV1_DIV13_Pos) /*!< 0x0000000C */ +#define RCC_CFGR2_PREDIV1_DIV13 RCC_CFGR2_PREDIV1_DIV13_Msk /*!< PREDIV1 input clock divided by 13 */ +#define RCC_CFGR2_PREDIV1_DIV14_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV14_Msk (0xDUL << RCC_CFGR2_PREDIV1_DIV14_Pos) /*!< 0x0000000D */ +#define RCC_CFGR2_PREDIV1_DIV14 RCC_CFGR2_PREDIV1_DIV14_Msk /*!< PREDIV1 input clock divided by 14 */ +#define RCC_CFGR2_PREDIV1_DIV15_Pos (1U) +#define RCC_CFGR2_PREDIV1_DIV15_Msk (0x7UL << RCC_CFGR2_PREDIV1_DIV15_Pos) /*!< 0x0000000E */ +#define RCC_CFGR2_PREDIV1_DIV15 RCC_CFGR2_PREDIV1_DIV15_Msk /*!< PREDIV1 input clock divided by 15 */ +#define RCC_CFGR2_PREDIV1_DIV16_Pos (0U) +#define RCC_CFGR2_PREDIV1_DIV16_Msk (0xFUL << RCC_CFGR2_PREDIV1_DIV16_Pos) /*!< 0x0000000F */ +#define RCC_CFGR2_PREDIV1_DIV16 RCC_CFGR2_PREDIV1_DIV16_Msk /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ +#define RCC_CFGR2_PREDIV2_Pos (4U) +#define RCC_CFGR2_PREDIV2_Msk (0xFUL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR2_PREDIV2 RCC_CFGR2_PREDIV2_Msk /*!< PREDIV2[3:0] bits */ +#define RCC_CFGR2_PREDIV2_0 (0x1UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000010 */ +#define RCC_CFGR2_PREDIV2_1 (0x2UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000020 */ +#define RCC_CFGR2_PREDIV2_2 (0x4UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000040 */ +#define RCC_CFGR2_PREDIV2_3 (0x8UL << RCC_CFGR2_PREDIV2_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR2_PREDIV2_DIV1 0x00000000U /*!< PREDIV2 input clock not divided */ +#define RCC_CFGR2_PREDIV2_DIV2_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV2_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV2_Pos) /*!< 0x00000010 */ +#define RCC_CFGR2_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2_Msk /*!< PREDIV2 input clock divided by 2 */ +#define RCC_CFGR2_PREDIV2_DIV3_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV3_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV3_Pos) /*!< 0x00000020 */ +#define RCC_CFGR2_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3_Msk /*!< PREDIV2 input clock divided by 3 */ +#define RCC_CFGR2_PREDIV2_DIV4_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV4_Msk (0x3UL << RCC_CFGR2_PREDIV2_DIV4_Pos) /*!< 0x00000030 */ +#define RCC_CFGR2_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4_Msk /*!< PREDIV2 input clock divided by 4 */ +#define RCC_CFGR2_PREDIV2_DIV5_Pos (6U) +#define RCC_CFGR2_PREDIV2_DIV5_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV5_Pos) /*!< 0x00000040 */ +#define RCC_CFGR2_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5_Msk /*!< PREDIV2 input clock divided by 5 */ +#define RCC_CFGR2_PREDIV2_DIV6_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV6_Msk (0x5UL << RCC_CFGR2_PREDIV2_DIV6_Pos) /*!< 0x00000050 */ +#define RCC_CFGR2_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6_Msk /*!< PREDIV2 input clock divided by 6 */ +#define RCC_CFGR2_PREDIV2_DIV7_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV7_Msk (0x3UL << RCC_CFGR2_PREDIV2_DIV7_Pos) /*!< 0x00000060 */ +#define RCC_CFGR2_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7_Msk /*!< PREDIV2 input clock divided by 7 */ +#define RCC_CFGR2_PREDIV2_DIV8_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV8_Msk (0x7UL << RCC_CFGR2_PREDIV2_DIV8_Pos) /*!< 0x00000070 */ +#define RCC_CFGR2_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8_Msk /*!< PREDIV2 input clock divided by 8 */ +#define RCC_CFGR2_PREDIV2_DIV9_Pos (7U) +#define RCC_CFGR2_PREDIV2_DIV9_Msk (0x1UL << RCC_CFGR2_PREDIV2_DIV9_Pos) /*!< 0x00000080 */ +#define RCC_CFGR2_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9_Msk /*!< PREDIV2 input clock divided by 9 */ +#define RCC_CFGR2_PREDIV2_DIV10_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV10_Msk (0x9UL << RCC_CFGR2_PREDIV2_DIV10_Pos) /*!< 0x00000090 */ +#define RCC_CFGR2_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10_Msk /*!< PREDIV2 input clock divided by 10 */ +#define RCC_CFGR2_PREDIV2_DIV11_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV11_Msk (0x5UL << RCC_CFGR2_PREDIV2_DIV11_Pos) /*!< 0x000000A0 */ +#define RCC_CFGR2_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11_Msk /*!< PREDIV2 input clock divided by 11 */ +#define RCC_CFGR2_PREDIV2_DIV12_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV12_Msk (0xBUL << RCC_CFGR2_PREDIV2_DIV12_Pos) /*!< 0x000000B0 */ +#define RCC_CFGR2_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12_Msk /*!< PREDIV2 input clock divided by 12 */ +#define RCC_CFGR2_PREDIV2_DIV13_Pos (6U) +#define RCC_CFGR2_PREDIV2_DIV13_Msk (0x3UL << RCC_CFGR2_PREDIV2_DIV13_Pos) /*!< 0x000000C0 */ +#define RCC_CFGR2_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13_Msk /*!< PREDIV2 input clock divided by 13 */ +#define RCC_CFGR2_PREDIV2_DIV14_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV14_Msk (0xDUL << RCC_CFGR2_PREDIV2_DIV14_Pos) /*!< 0x000000D0 */ +#define RCC_CFGR2_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14_Msk /*!< PREDIV2 input clock divided by 14 */ +#define RCC_CFGR2_PREDIV2_DIV15_Pos (5U) +#define RCC_CFGR2_PREDIV2_DIV15_Msk (0x7UL << RCC_CFGR2_PREDIV2_DIV15_Pos) /*!< 0x000000E0 */ +#define RCC_CFGR2_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15_Msk /*!< PREDIV2 input clock divided by 15 */ +#define RCC_CFGR2_PREDIV2_DIV16_Pos (4U) +#define RCC_CFGR2_PREDIV2_DIV16_Msk (0xFUL << RCC_CFGR2_PREDIV2_DIV16_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR2_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16_Msk /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ +#define RCC_CFGR2_PLL2MUL_Pos (8U) +#define RCC_CFGR2_PLL2MUL_Msk (0xFUL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000F00 */ +#define RCC_CFGR2_PLL2MUL RCC_CFGR2_PLL2MUL_Msk /*!< PLL2MUL[3:0] bits */ +#define RCC_CFGR2_PLL2MUL_0 (0x1UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000100 */ +#define RCC_CFGR2_PLL2MUL_1 (0x2UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000200 */ +#define RCC_CFGR2_PLL2MUL_2 (0x4UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000400 */ +#define RCC_CFGR2_PLL2MUL_3 (0x8UL << RCC_CFGR2_PLL2MUL_Pos) /*!< 0x00000800 */ + +#define RCC_CFGR2_PLL2MUL8_Pos (9U) +#define RCC_CFGR2_PLL2MUL8_Msk (0x3UL << RCC_CFGR2_PLL2MUL8_Pos) /*!< 0x00000600 */ +#define RCC_CFGR2_PLL2MUL8 RCC_CFGR2_PLL2MUL8_Msk /*!< PLL2 input clock * 8 */ +#define RCC_CFGR2_PLL2MUL9_Pos (8U) +#define RCC_CFGR2_PLL2MUL9_Msk (0x7UL << RCC_CFGR2_PLL2MUL9_Pos) /*!< 0x00000700 */ +#define RCC_CFGR2_PLL2MUL9 RCC_CFGR2_PLL2MUL9_Msk /*!< PLL2 input clock * 9 */ +#define RCC_CFGR2_PLL2MUL10_Pos (11U) +#define RCC_CFGR2_PLL2MUL10_Msk (0x1UL << RCC_CFGR2_PLL2MUL10_Pos) /*!< 0x00000800 */ +#define RCC_CFGR2_PLL2MUL10 RCC_CFGR2_PLL2MUL10_Msk /*!< PLL2 input clock * 10 */ +#define RCC_CFGR2_PLL2MUL11_Pos (8U) +#define RCC_CFGR2_PLL2MUL11_Msk (0x9UL << RCC_CFGR2_PLL2MUL11_Pos) /*!< 0x00000900 */ +#define RCC_CFGR2_PLL2MUL11 RCC_CFGR2_PLL2MUL11_Msk /*!< PLL2 input clock * 11 */ +#define RCC_CFGR2_PLL2MUL12_Pos (9U) +#define RCC_CFGR2_PLL2MUL12_Msk (0x5UL << RCC_CFGR2_PLL2MUL12_Pos) /*!< 0x00000A00 */ +#define RCC_CFGR2_PLL2MUL12 RCC_CFGR2_PLL2MUL12_Msk /*!< PLL2 input clock * 12 */ +#define RCC_CFGR2_PLL2MUL13_Pos (8U) +#define RCC_CFGR2_PLL2MUL13_Msk (0xBUL << RCC_CFGR2_PLL2MUL13_Pos) /*!< 0x00000B00 */ +#define RCC_CFGR2_PLL2MUL13 RCC_CFGR2_PLL2MUL13_Msk /*!< PLL2 input clock * 13 */ +#define RCC_CFGR2_PLL2MUL14_Pos (10U) +#define RCC_CFGR2_PLL2MUL14_Msk (0x3UL << RCC_CFGR2_PLL2MUL14_Pos) /*!< 0x00000C00 */ +#define RCC_CFGR2_PLL2MUL14 RCC_CFGR2_PLL2MUL14_Msk /*!< PLL2 input clock * 14 */ +#define RCC_CFGR2_PLL2MUL16_Pos (9U) +#define RCC_CFGR2_PLL2MUL16_Msk (0x7UL << RCC_CFGR2_PLL2MUL16_Pos) /*!< 0x00000E00 */ +#define RCC_CFGR2_PLL2MUL16 RCC_CFGR2_PLL2MUL16_Msk /*!< PLL2 input clock * 16 */ +#define RCC_CFGR2_PLL2MUL20_Pos (8U) +#define RCC_CFGR2_PLL2MUL20_Msk (0xFUL << RCC_CFGR2_PLL2MUL20_Pos) /*!< 0x00000F00 */ +#define RCC_CFGR2_PLL2MUL20 RCC_CFGR2_PLL2MUL20_Msk /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ +#define RCC_CFGR2_PLL3MUL_Pos (12U) +#define RCC_CFGR2_PLL3MUL_Msk (0xFUL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x0000F000 */ +#define RCC_CFGR2_PLL3MUL RCC_CFGR2_PLL3MUL_Msk /*!< PLL3MUL[3:0] bits */ +#define RCC_CFGR2_PLL3MUL_0 (0x1UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00001000 */ +#define RCC_CFGR2_PLL3MUL_1 (0x2UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00002000 */ +#define RCC_CFGR2_PLL3MUL_2 (0x4UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00004000 */ +#define RCC_CFGR2_PLL3MUL_3 (0x8UL << RCC_CFGR2_PLL3MUL_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR2_PLL3MUL8_Pos (13U) +#define RCC_CFGR2_PLL3MUL8_Msk (0x3UL << RCC_CFGR2_PLL3MUL8_Pos) /*!< 0x00006000 */ +#define RCC_CFGR2_PLL3MUL8 RCC_CFGR2_PLL3MUL8_Msk /*!< PLL3 input clock * 8 */ +#define RCC_CFGR2_PLL3MUL9_Pos (12U) +#define RCC_CFGR2_PLL3MUL9_Msk (0x7UL << RCC_CFGR2_PLL3MUL9_Pos) /*!< 0x00007000 */ +#define RCC_CFGR2_PLL3MUL9 RCC_CFGR2_PLL3MUL9_Msk /*!< PLL3 input clock * 9 */ +#define RCC_CFGR2_PLL3MUL10_Pos (15U) +#define RCC_CFGR2_PLL3MUL10_Msk (0x1UL << RCC_CFGR2_PLL3MUL10_Pos) /*!< 0x00008000 */ +#define RCC_CFGR2_PLL3MUL10 RCC_CFGR2_PLL3MUL10_Msk /*!< PLL3 input clock * 10 */ +#define RCC_CFGR2_PLL3MUL11_Pos (12U) +#define RCC_CFGR2_PLL3MUL11_Msk (0x9UL << RCC_CFGR2_PLL3MUL11_Pos) /*!< 0x00009000 */ +#define RCC_CFGR2_PLL3MUL11 RCC_CFGR2_PLL3MUL11_Msk /*!< PLL3 input clock * 11 */ +#define RCC_CFGR2_PLL3MUL12_Pos (13U) +#define RCC_CFGR2_PLL3MUL12_Msk (0x5UL << RCC_CFGR2_PLL3MUL12_Pos) /*!< 0x0000A000 */ +#define RCC_CFGR2_PLL3MUL12 RCC_CFGR2_PLL3MUL12_Msk /*!< PLL3 input clock * 12 */ +#define RCC_CFGR2_PLL3MUL13_Pos (12U) +#define RCC_CFGR2_PLL3MUL13_Msk (0xBUL << RCC_CFGR2_PLL3MUL13_Pos) /*!< 0x0000B000 */ +#define RCC_CFGR2_PLL3MUL13 RCC_CFGR2_PLL3MUL13_Msk /*!< PLL3 input clock * 13 */ +#define RCC_CFGR2_PLL3MUL14_Pos (14U) +#define RCC_CFGR2_PLL3MUL14_Msk (0x3UL << RCC_CFGR2_PLL3MUL14_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR2_PLL3MUL14 RCC_CFGR2_PLL3MUL14_Msk /*!< PLL3 input clock * 14 */ +#define RCC_CFGR2_PLL3MUL16_Pos (13U) +#define RCC_CFGR2_PLL3MUL16_Msk (0x7UL << RCC_CFGR2_PLL3MUL16_Pos) /*!< 0x0000E000 */ +#define RCC_CFGR2_PLL3MUL16 RCC_CFGR2_PLL3MUL16_Msk /*!< PLL3 input clock * 16 */ +#define RCC_CFGR2_PLL3MUL20_Pos (12U) +#define RCC_CFGR2_PLL3MUL20_Msk (0xFUL << RCC_CFGR2_PLL3MUL20_Pos) /*!< 0x0000F000 */ +#define RCC_CFGR2_PLL3MUL20 RCC_CFGR2_PLL3MUL20_Msk /*!< PLL3 input clock * 20 */ + +#define RCC_CFGR2_PREDIV1SRC_Pos (16U) +#define RCC_CFGR2_PREDIV1SRC_Msk (0x1UL << RCC_CFGR2_PREDIV1SRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR2_PREDIV1SRC RCC_CFGR2_PREDIV1SRC_Msk /*!< PREDIV1 entry clock source */ +#define RCC_CFGR2_PREDIV1SRC_PLL2_Pos (16U) +#define RCC_CFGR2_PREDIV1SRC_PLL2_Msk (0x1UL << RCC_CFGR2_PREDIV1SRC_PLL2_Pos) /*!< 0x00010000 */ +#define RCC_CFGR2_PREDIV1SRC_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2_Msk /*!< PLL2 selected as PREDIV1 entry clock source */ +#define RCC_CFGR2_PREDIV1SRC_HSE 0x00000000U /*!< HSE selected as PREDIV1 entry clock source */ +#define RCC_CFGR2_I2S2SRC_Pos (17U) +#define RCC_CFGR2_I2S2SRC_Msk (0x1UL << RCC_CFGR2_I2S2SRC_Pos) /*!< 0x00020000 */ +#define RCC_CFGR2_I2S2SRC RCC_CFGR2_I2S2SRC_Msk /*!< I2S2 entry clock source */ +#define RCC_CFGR2_I2S3SRC_Pos (18U) +#define RCC_CFGR2_I2S3SRC_Msk (0x1UL << RCC_CFGR2_I2S3SRC_Pos) /*!< 0x00040000 */ +#define RCC_CFGR2_I2S3SRC RCC_CFGR2_I2S3SRC_Msk /*!< I2S3 clock source */ + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP_Pos (16U) +#define AFIO_MAPR_TIM5CH4_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM5CH4_IREMAP_Pos) /*!< 0x00010000 */ +#define AFIO_MAPR_TIM5CH4_IREMAP AFIO_MAPR_TIM5CH4_IREMAP_Msk /*!< TIM5 Channel4 Internal Remap */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + +/*!< ETH_REMAP configuration */ +#define AFIO_MAPR_ETH_REMAP_Pos (21U) +#define AFIO_MAPR_ETH_REMAP_Msk (0x1UL << AFIO_MAPR_ETH_REMAP_Pos) /*!< 0x00200000 */ +#define AFIO_MAPR_ETH_REMAP AFIO_MAPR_ETH_REMAP_Msk /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ +#define AFIO_MAPR_CAN2_REMAP_Pos (22U) +#define AFIO_MAPR_CAN2_REMAP_Msk (0x1UL << AFIO_MAPR_CAN2_REMAP_Pos) /*!< 0x00400000 */ +#define AFIO_MAPR_CAN2_REMAP AFIO_MAPR_CAN2_REMAP_Msk /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ +#define AFIO_MAPR_MII_RMII_SEL_Pos (23U) +#define AFIO_MAPR_MII_RMII_SEL_Msk (0x1UL << AFIO_MAPR_MII_RMII_SEL_Pos) /*!< 0x00800000 */ +#define AFIO_MAPR_MII_RMII_SEL AFIO_MAPR_MII_RMII_SEL_Msk /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ +#define AFIO_MAPR_SPI3_REMAP_Pos (28U) +#define AFIO_MAPR_SPI3_REMAP_Msk (0x1UL << AFIO_MAPR_SPI3_REMAP_Pos) /*!< 0x10000000 */ +#define AFIO_MAPR_SPI3_REMAP AFIO_MAPR_SPI3_REMAP_Msk /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ +#define AFIO_MAPR_TIM2ITR1_IREMAP_Pos (29U) +#define AFIO_MAPR_TIM2ITR1_IREMAP_Msk (0x1UL << AFIO_MAPR_TIM2ITR1_IREMAP_Pos) /*!< 0x20000000 */ +#define AFIO_MAPR_TIM2ITR1_IREMAP AFIO_MAPR_TIM2ITR1_IREMAP_Msk /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ +#define AFIO_MAPR_PTP_PPS_REMAP_Pos (30U) +#define AFIO_MAPR_PTP_PPS_REMAP_Msk (0x1UL << AFIO_MAPR_PTP_PPS_REMAP_Pos) /*!< 0x40000000 */ +#define AFIO_MAPR_PTP_PPS_REMAP AFIO_MAPR_PTP_PPS_REMAP_Msk /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19_Pos (19U) +#define EXTI_IMR_MR19_Msk (0x1UL << EXTI_IMR_MR19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR_MR19 EXTI_IMR_MR19_Msk /*!< Interrupt Mask on line 19 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM19 EXTI_IMR_MR19 +#define EXTI_IMR_IM 0x000FFFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19_Pos (19U) +#define EXTI_EMR_MR19_Msk (0x1UL << EXTI_EMR_MR19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR_MR19 EXTI_EMR_MR19_Msk /*!< Event Mask on line 19 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 +#define EXTI_EMR_EM19 EXTI_EMR_MR19 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19_Pos (19U) +#define EXTI_RTSR_TR19_Msk (0x1UL << EXTI_RTSR_TR19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR_TR19 EXTI_RTSR_TR19_Msk /*!< Rising trigger event configuration bit of line 19 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 +#define EXTI_RTSR_RT19 EXTI_RTSR_TR19 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19_Pos (19U) +#define EXTI_FTSR_TR19_Msk (0x1UL << EXTI_FTSR_TR19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR_TR19 EXTI_FTSR_TR19_Msk /*!< Falling trigger event configuration bit of line 19 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 +#define EXTI_FTSR_FT19 EXTI_FTSR_TR19 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19_Pos (19U) +#define EXTI_SWIER_SWIER19_Msk (0x1UL << EXTI_SWIER_SWIER19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER_SWIER19 EXTI_SWIER_SWIER19_Msk /*!< Software Interrupt on line 19 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 +#define EXTI_SWIER_SWI19 EXTI_SWIER_SWIER19 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19_Pos (19U) +#define EXTI_PR_PR19_Msk (0x1UL << EXTI_PR_PR19_Pos) /*!< 0x00080000 */ +#define EXTI_PR_PR19 EXTI_PR_PR19_Msk /*!< Pending bit for line 19 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 +#define EXTI_PR_PIF19 EXTI_PR_PR19 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1_Pos (1U) +#define DAC_CR_BOFF1_Msk (0x1UL << DAC_CR_BOFF1_Pos) /*!< 0x00000002 */ +#define DAC_CR_BOFF1 DAC_CR_BOFF1_Msk /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1_Pos (2U) +#define DAC_CR_TEN1_Msk (0x1UL << DAC_CR_TEN1_Pos) /*!< 0x00000004 */ +#define DAC_CR_TEN1 DAC_CR_TEN1_Msk /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1_Pos (3U) +#define DAC_CR_TSEL1_Msk (0x7UL << DAC_CR_TSEL1_Pos) /*!< 0x00000038 */ +#define DAC_CR_TSEL1 DAC_CR_TSEL1_Msk /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 (0x1UL << DAC_CR_TSEL1_Pos) /*!< 0x00000008 */ +#define DAC_CR_TSEL1_1 (0x2UL << DAC_CR_TSEL1_Pos) /*!< 0x00000010 */ +#define DAC_CR_TSEL1_2 (0x4UL << DAC_CR_TSEL1_Pos) /*!< 0x00000020 */ + +#define DAC_CR_WAVE1_Pos (6U) +#define DAC_CR_WAVE1_Msk (0x3UL << DAC_CR_WAVE1_Pos) /*!< 0x000000C0 */ +#define DAC_CR_WAVE1 DAC_CR_WAVE1_Msk /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 (0x1UL << DAC_CR_WAVE1_Pos) /*!< 0x00000040 */ +#define DAC_CR_WAVE1_1 (0x2UL << DAC_CR_WAVE1_Pos) /*!< 0x00000080 */ + +#define DAC_CR_MAMP1_Pos (8U) +#define DAC_CR_MAMP1_Msk (0xFUL << DAC_CR_MAMP1_Pos) /*!< 0x00000F00 */ +#define DAC_CR_MAMP1 DAC_CR_MAMP1_Msk /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 (0x1UL << DAC_CR_MAMP1_Pos) /*!< 0x00000100 */ +#define DAC_CR_MAMP1_1 (0x2UL << DAC_CR_MAMP1_Pos) /*!< 0x00000200 */ +#define DAC_CR_MAMP1_2 (0x4UL << DAC_CR_MAMP1_Pos) /*!< 0x00000400 */ +#define DAC_CR_MAMP1_3 (0x8UL << DAC_CR_MAMP1_Pos) /*!< 0x00000800 */ + +#define DAC_CR_DMAEN1_Pos (12U) +#define DAC_CR_DMAEN1_Msk (0x1UL << DAC_CR_DMAEN1_Pos) /*!< 0x00001000 */ +#define DAC_CR_DMAEN1 DAC_CR_DMAEN1_Msk /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2_Pos (17U) +#define DAC_CR_BOFF2_Msk (0x1UL << DAC_CR_BOFF2_Pos) /*!< 0x00020000 */ +#define DAC_CR_BOFF2 DAC_CR_BOFF2_Msk /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2_Pos (18U) +#define DAC_CR_TEN2_Msk (0x1UL << DAC_CR_TEN2_Pos) /*!< 0x00040000 */ +#define DAC_CR_TEN2 DAC_CR_TEN2_Msk /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2_Pos (19U) +#define DAC_CR_TSEL2_Msk (0x7UL << DAC_CR_TSEL2_Pos) /*!< 0x00380000 */ +#define DAC_CR_TSEL2 DAC_CR_TSEL2_Msk /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 (0x1UL << DAC_CR_TSEL2_Pos) /*!< 0x00080000 */ +#define DAC_CR_TSEL2_1 (0x2UL << DAC_CR_TSEL2_Pos) /*!< 0x00100000 */ +#define DAC_CR_TSEL2_2 (0x4UL << DAC_CR_TSEL2_Pos) /*!< 0x00200000 */ + +#define DAC_CR_WAVE2_Pos (22U) +#define DAC_CR_WAVE2_Msk (0x3UL << DAC_CR_WAVE2_Pos) /*!< 0x00C00000 */ +#define DAC_CR_WAVE2 DAC_CR_WAVE2_Msk /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 (0x1UL << DAC_CR_WAVE2_Pos) /*!< 0x00400000 */ +#define DAC_CR_WAVE2_1 (0x2UL << DAC_CR_WAVE2_Pos) /*!< 0x00800000 */ + +#define DAC_CR_MAMP2_Pos (24U) +#define DAC_CR_MAMP2_Msk (0xFUL << DAC_CR_MAMP2_Pos) /*!< 0x0F000000 */ +#define DAC_CR_MAMP2 DAC_CR_MAMP2_Msk /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 (0x1UL << DAC_CR_MAMP2_Pos) /*!< 0x01000000 */ +#define DAC_CR_MAMP2_1 (0x2UL << DAC_CR_MAMP2_Pos) /*!< 0x02000000 */ +#define DAC_CR_MAMP2_2 (0x4UL << DAC_CR_MAMP2_Pos) /*!< 0x04000000 */ +#define DAC_CR_MAMP2_3 (0x8UL << DAC_CR_MAMP2_Pos) /*!< 0x08000000 */ + +#define DAC_CR_DMAEN2_Pos (28U) +#define DAC_CR_DMAEN2_Msk (0x1UL << DAC_CR_DMAEN2_Pos) /*!< 0x10000000 */ +#define DAC_CR_DMAEN2 DAC_CR_DMAEN2_Msk /*!< DAC channel2 DMA enabled */ + + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2_Pos (1U) +#define DAC_SWTRIGR_SWTRIG2_Msk (0x1UL << DAC_SWTRIGR_SWTRIG2_Pos) /*!< 0x00000002 */ +#define DAC_SWTRIGR_SWTRIG2 DAC_SWTRIGR_SWTRIG2_Msk /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR_Pos (0U) +#define DAC_DHR12R1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12R1_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R1_DACC1DHR DAC_DHR12R1_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR_Pos (4U) +#define DAC_DHR12L1_DACC1DHR_Msk (0xFFFUL << DAC_DHR12L1_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L1_DACC1DHR DAC_DHR12L1_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR_Pos (0U) +#define DAC_DHR8R1_DACC1DHR_Msk (0xFFUL << DAC_DHR8R1_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R1_DACC1DHR DAC_DHR8R1_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR_Pos (0U) +#define DAC_DHR12R2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12R2_DACC2DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12R2_DACC2DHR DAC_DHR12R2_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR_Pos (4U) +#define DAC_DHR12L2_DACC2DHR_Msk (0xFFFUL << DAC_DHR12L2_DACC2DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12L2_DACC2DHR DAC_DHR12L2_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR_Pos (0U) +#define DAC_DHR8R2_DACC2DHR_Msk (0xFFUL << DAC_DHR8R2_DACC2DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8R2_DACC2DHR DAC_DHR8R2_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR_Pos (0U) +#define DAC_DHR12RD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC1DHR_Pos) /*!< 0x00000FFF */ +#define DAC_DHR12RD_DACC1DHR DAC_DHR12RD_DACC1DHR_Msk /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR_Pos (16U) +#define DAC_DHR12RD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12RD_DACC2DHR_Pos) /*!< 0x0FFF0000 */ +#define DAC_DHR12RD_DACC2DHR DAC_DHR12RD_DACC2DHR_Msk /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR_Pos (4U) +#define DAC_DHR12LD_DACC1DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC1DHR_Pos) /*!< 0x0000FFF0 */ +#define DAC_DHR12LD_DACC1DHR DAC_DHR12LD_DACC1DHR_Msk /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR_Pos (20U) +#define DAC_DHR12LD_DACC2DHR_Msk (0xFFFUL << DAC_DHR12LD_DACC2DHR_Pos) /*!< 0xFFF00000 */ +#define DAC_DHR12LD_DACC2DHR DAC_DHR12LD_DACC2DHR_Msk /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR_Pos (0U) +#define DAC_DHR8RD_DACC1DHR_Msk (0xFFUL << DAC_DHR8RD_DACC1DHR_Pos) /*!< 0x000000FF */ +#define DAC_DHR8RD_DACC1DHR DAC_DHR8RD_DACC1DHR_Msk /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR_Pos (8U) +#define DAC_DHR8RD_DACC2DHR_Msk (0xFFUL << DAC_DHR8RD_DACC2DHR_Pos) /*!< 0x0000FF00 */ +#define DAC_DHR8RD_DACC2DHR DAC_DHR8RD_DACC2DHR_Msk /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR_Pos (0U) +#define DAC_DOR1_DACC1DOR_Msk (0xFFFUL << DAC_DOR1_DACC1DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR1_DACC1DOR DAC_DOR1_DACC1DOR_Msk /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR_Pos (0U) +#define DAC_DOR2_DACC2DOR_Msk (0xFFFUL << DAC_DOR2_DACC2DOR_Pos) /*!< 0x00000FFF */ +#define DAC_DOR2_DACC2DOR DAC_DOR2_DACC2DOR_Msk /*!< DAC channel2 data output */ + + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f1xx + * @{ + */ + +#ifndef __STM32F1XX_H +#define __STM32F1XX_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F1) +#define STM32F1 +#endif /* STM32F1 */ + +/* Uncomment the line below according to the target STM32L device used in your + application + */ + +#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \ + !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \ + !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC) + /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */ + /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */ + /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */ + /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */ + /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ + /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */ + /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */ + /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */ + /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */ + /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */ + /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */ + /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */ + /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */ + /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V4.3.3 + */ +#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ +#define __STM32F1_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ +#define __STM32F1_CMSIS_VERSION_SUB2 (0x03) /*!< [15:8] sub2 version */ +#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\ + |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32F1_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32F100xB) + #include "stm32f100xb_matlab.h" +#elif defined(STM32F100xE) + #include "stm32f100xe_matlab.h" +#elif defined(STM32F101x6) + #include "stm32f101x6_matlab.h" +#elif defined(STM32F101xB) + #include "stm32f101xb_matlab.h" +#elif defined(STM32F101xE) + #include "stm32f101xe_matlab.h" +#elif defined(STM32F101xG) + #include "stm32f101xg_matlab.h" +#elif defined(STM32F102x6) + #include "stm32f102x6_matlab.h" +#elif defined(STM32F102xB) + #include "stm32f102xb_matlab.h" +#elif defined(STM32F103x6) + #include "stm32f103x6_matlab.h" +#elif defined(STM32F103xB) + #include "stm32f103xb_matlab.h" +#elif defined(STM32F103xE) + #include "stm32f103xe_matlab.h" +#elif defined(STM32F103xG) + #include "stm32f103xg_matlab.h" +#elif defined(STM32F105xC) + #include "stm32f105xc_matlab.h" +#elif defined(STM32F107xC) + #include "stm32f107xc_matlab.h" +#else + #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0U, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + +/* Use of CMSIS compiler intrinsics for register exclusive access */ +/* Atomic 32-bit register access macro to set one or several bits */ +#define ATOMIC_SET_BIT(REG, BIT) \ + do { \ + uint32_t val; \ + do { \ + val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 32-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEAR_BIT(REG, BIT) \ + do { \ + uint32_t val; \ + do { \ + val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 32-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint32_t val; \ + do { \ + val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to set one or several bits */ +#define ATOMIC_SETH_BIT(REG, BIT) \ + do { \ + uint16_t val; \ + do { \ + val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEARH_BIT(REG, BIT) \ + do { \ + uint16_t val; \ + do { \ + val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint16_t val; \ + do { \ + val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32f1xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F1xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/system_stm32f1xx.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/system_stm32f1xx.h new file mode 100644 index 0000000..187fdde --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/system_stm32f1xx.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.h + * @author MCD Application Team + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F10X_H +#define __SYSTEM_STM32F10X_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F10x_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F10x_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ +extern const uint8_t AHBPrescTable[16U]; /*!< AHB prescalers table values */ +extern const uint8_t APBPrescTable[8U]; /*!< APB prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F10X_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/CMSIS/arm_defines.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/arm_defines.h new file mode 100644 index 0000000..14dd709 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/arm_defines.h @@ -0,0 +1,104 @@ + +#define __disable_irq() + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __IO + #define __IO volatile +#endif + +#ifndef __inline + #define __inline inline +#endif + +#ifndef __NOINLINE +#define __NOINLINE __declspec(noinline) +#endif + +#ifndef __INLINE + #define __INLINE __inline +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif + +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif + +#ifndef __USED + #define __USED __attribute__((used)) +#endif + + +#ifndef __WEAK + #define __WEAK __declspec(selectany) +// #define __weak __WEAK +#endif + +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif + +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif + +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif + +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif + +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif + +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif + +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif + +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +//#define __CLZ (uint8_t)clz +// +//#define __CTZ (uint8_t)ctz + +#define __CLZ +#define __CTZ +#define __RBIT + +#ifndef __weak + #define __weak +#endif +#define __DSB() +#define __ISB() +#define __NOP() +#define __WFI() +#define __SEV() +#define __WFE() +#define __DMB() + diff --git a/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm1_matlab.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm1_matlab.h new file mode 100644 index 0000000..0ed678e --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm1_matlab.h @@ -0,0 +1,976 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 23. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm3_matlab.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm3_matlab.h new file mode 100644 index 0000000..639e422 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm3_matlab.h @@ -0,0 +1,1823 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef __CMSIS_GENERIC +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + + /* Memory mapping of Core Hardware */ +#define SCS_BASE_SHIFT (0x0000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE_SHIFT (0x00000000UL) /*!< ITM Base Address */ +#define DWT_BASE_SHIFT (0x00001000UL) /*!< DWT Base Address */ +#define TPI_BASE_SHIFT (0x00040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE_SHIFT (0x0000EDF0UL) /*!< Core Debug Base Address */ + +typedef struct _cortex_memory +{ + uint8_t CORTEX_PERIPH_BASE[0xE0100000 - 0xE0000000]; +}MCU_CortexMemoryTypeDef; +extern MCU_CortexMemoryTypeDef MCU_CORTEX_MEM; + +#define SCS_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< System Control Space Base Address */ +#define ITM_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< ITM Base Address */ +#define DWT_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< DWT Base Address */ +#define TPI_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< TPI Base Address */ +#define CoreDebug_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ +#define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + + +#endif /* __CMSIS_GENERIC */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h similarity index 97% rename from MCU_STM32F4xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h rename to MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h index 5a8ed1e..8e3fad6 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h +++ b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h @@ -1,18 +1,10 @@ -/** -************************************************************************** -* @file core_cm4_matlab.h -* @brief Заголовочный файл ядра Core CM4 для MATLAB. -************************************************************************** -@details +/************************************************************************ Данный файл является копией core_cm4.h, только первые ~160 строк, которые определяют компилятор АРМ, удалены. - МАТЛАБ компилирует через код через комплилятор MSVC для блока S-Function - -Также добавлена инклюд с имитирацией памяти ядра (~10) +Также добавлена структура имитирующая память ядра (~1360) **************************************************************************/ #ifndef __CMSIS_GENERIC -#include "stm32f407xx_matlab_memory.h" /* IO definitions (access restrictions to peripheral registers) */ /** \defgroup CMSIS_glob_defs CMSIS Global Defines @@ -1352,7 +1344,50 @@ typedef struct /*@} end of group CMSIS_core_bitfield */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ +/* Memory mapping of Core Hardware */ +#define SCS_BASE_SHIFT (0x0000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE_SHIFT (0x00000000UL) /*!< ITM Base Address */ +#define DWT_BASE_SHIFT (0x00001000UL) /*!< DWT Base Address */ +#define TPI_BASE_SHIFT (0x00040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE_SHIFT (0x0000EDF0UL) /*!< Core Debug Base Address */ + +typedef struct _cortex_memory +{ + uint8_t CORTEX_PERIPH_BASE[0xE0100000 - 0xE0000000]; +}MCU_CortexMemoryTypeDef; +extern MCU_CortexMemoryTypeDef MCU_CORTEX_MEM; + +#define SCS_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< System Control Space Base Address */ +#define ITM_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< ITM Base Address */ +#define DWT_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< DWT Base Address */ +#define TPI_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< TPI Base Address */ +#define CoreDebug_BASE (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ +#define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ /*@} */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/stdint.h b/MCU_STM32F1xx_Matlab/Drivers/CMSIS/stdint.h similarity index 100% rename from MCU_STM32F4xx_Matlab/Drivers/CMSIS/stdint.h rename to MCU_STM32F1xx_Matlab/Drivers/CMSIS/stdint.h diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h similarity index 91% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h index 934f1f9..ac54cea 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -7,12 +7,13 @@ ****************************************************************************** * @attention * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -22,7 +23,7 @@ #define STM32_HAL_LEGACY #ifdef __cplusplus -extern "C" { + extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -37,16 +38,6 @@ extern "C" { #define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF #define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR #define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR -#if defined(STM32U5) || defined(STM32H7) || defined(STM32MP1) -#define CRYP_DATATYPE_32B CRYP_NO_SWAP -#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP -#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP -#define CRYP_DATATYPE_1B CRYP_BIT_SWAP -#if defined(STM32U5) -#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF -#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF -#endif /* STM32U5 */ -#endif /* STM32U5 || STM32H7 || STM32MP1 */ /** * @} */ @@ -106,13 +97,6 @@ extern "C" { #if defined(STM32H7) #define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT #endif /* STM32H7 */ - -#if defined(STM32U5) -#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES -#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES -#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 -#endif /* STM32U5 */ - /** * @} */ @@ -222,23 +206,6 @@ extern "C" { * @{ */ #define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig -#if defined(STM32U5) -#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE -#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE -#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup CRC_Aliases CRC API aliases - * @{ - */ -#if defined(STM32C0) -#else -#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */ -#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */ -#endif /** * @} */ @@ -268,18 +235,11 @@ extern "C" { #define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE #define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE -#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) +#if defined(STM32G4) || defined(STM32H7) #define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL #define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL #endif -#if defined(STM32U5) -#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 -#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 -#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 -#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 -#endif - #if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) #define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID #define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID @@ -423,9 +383,6 @@ extern "C" { #endif /* STM32H7 */ -#if defined(STM32U5) -#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI -#endif /* STM32U5 */ /** * @} */ @@ -505,7 +462,7 @@ extern "C" { #define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 #define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 #define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 -#if defined(STM32G0) || defined(STM32C0) +#if defined(STM32G0) #define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE #define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH #else @@ -513,24 +470,15 @@ extern "C" { #define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE #endif #if defined(STM32H7) -#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 -#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 -#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 -#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 -#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 -#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 -#define FLASH_FLAG_WDW FLASH_FLAG_WBNE -#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL #endif /* STM32H7 */ -#if defined(STM32U5) -#define OB_USER_nRST_STOP OB_USER_NRST_STOP -#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY -#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW -#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 -#define OB_USER_nBOOT0 OB_USER_NBOOT0 -#define OB_nBOOT0_RESET OB_NBOOT0_RESET -#define OB_nBOOT0_SET OB_NBOOT0_SET -#endif /* STM32U5 */ /** * @} @@ -573,7 +521,6 @@ extern "C" { #define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD #define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD #endif /* STM32G4 */ - /** * @} */ @@ -648,45 +595,27 @@ extern "C" { #define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 #define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM #define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ #if defined(STM32L1) -#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH #endif /* STM32L1 */ #if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH #endif /* STM32F0 || STM32F3 || STM32F1 */ #define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 - -#if defined(STM32U5) -#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ -#endif /* STM32U5 */ -#if defined(STM32U5) -#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP -#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose - * @{ - */ -#if defined(STM32U5) -#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI -#endif /* STM32U5 */ /** * @} */ @@ -844,6 +773,49 @@ extern "C" { #define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) #define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + /** @brief Constants defining the DLL calibration periods (in micro seconds) */ #define HRTIM_CALIBRATIONRATE_7300 0x00000000U @@ -924,20 +896,6 @@ extern "C" { #define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS #define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS - -/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue -/** - * @} - */ - -#if defined(STM32U5) -#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF -#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF -#define LPTIM_CHANNEL_ALL 0x00000000U -#endif /* STM32U5 */ /** * @} */ @@ -1010,11 +968,6 @@ extern "C" { #define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID #endif -#if defined(STM32L4) || defined(STM32L5) -#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER -#elif defined(STM32G4) -#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED -#endif /** * @} @@ -1026,15 +979,15 @@ extern "C" { #define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS #if defined(STM32H7) -#define I2S_IT_TXE I2S_IT_TXP -#define I2S_IT_RXNE I2S_IT_RXP + #define I2S_IT_TXE I2S_IT_TXP + #define I2S_IT_RXNE I2S_IT_RXP -#define I2S_FLAG_TXE I2S_FLAG_TXP -#define I2S_FLAG_RXNE I2S_FLAG_RXP + #define I2S_FLAG_TXE I2S_FLAG_TXP + #define I2S_FLAG_RXNE I2S_FLAG_RXP #endif #if defined(STM32F7) -#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL #endif /** * @} @@ -1069,7 +1022,7 @@ extern "C" { /** * @} */ - + /** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose * @{ */ @@ -1089,8 +1042,8 @@ extern "C" { #define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT #define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT -#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 #define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 #define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE @@ -1101,22 +1054,15 @@ extern "C" { #define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 #define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 -#if defined(STM32F7) -#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK -#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK -#endif /* STM32F7 */ - #if defined(STM32H7) #define RTC_TAMPCR_TAMPXE RTC_TAMPER_X #define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT -#endif /* STM32H7 */ -#if defined(STM32F7) || defined(STM32H7) #define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 #define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 #define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 -#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP -#endif /* STM32F7 || STM32H7 */ +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ /** * @} @@ -1176,16 +1122,16 @@ extern "C" { #if defined(STM32H7) -#define SPI_FLAG_TXE SPI_FLAG_TXP -#define SPI_FLAG_RXNE SPI_FLAG_RXP + #define SPI_FLAG_TXE SPI_FLAG_TXP + #define SPI_FLAG_RXNE SPI_FLAG_RXP -#define SPI_IT_TXE SPI_IT_TXP -#define SPI_IT_RXNE SPI_IT_RXP + #define SPI_IT_TXE SPI_IT_TXP + #define SPI_IT_RXNE SPI_IT_RXP -#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET -#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET -#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET -#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET + #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET + #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET + #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET #endif /* STM32H7 */ @@ -1283,10 +1229,6 @@ extern "C" { #define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 #endif -#if defined(STM32U5) || defined(STM32MP2) -#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS -#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK -#endif /** * @} */ @@ -1475,20 +1417,6 @@ extern "C" { */ #endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ -#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ - || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ - || defined(STM32H7) || defined(STM32U5) -/** @defgroup DMA2D_Aliases DMA2D API Aliases - * @{ - */ -#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort - for compatibility with legacy code */ -/** - * @} - */ - -#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ - /** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose * @{ */ @@ -1507,29 +1435,6 @@ extern "C" { * @} */ -/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose - * @{ - */ - -#if defined(STM32U5) -#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr -#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT -#endif /* STM32U5 */ - -/** - * @} - */ - -#if !defined(STM32F2) -/** @defgroup HASH_alias HASH API alias - * @{ - */ -#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ -/** - * - * @} - */ -#endif /* STM32F2 */ /** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose * @{ */ @@ -1589,8 +1494,7 @@ extern "C" { #define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode #define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode #define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode -#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ - )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) #define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect #define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) #if defined(STM32L0) @@ -1598,8 +1502,7 @@ extern "C" { #define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) #endif #define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) -#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ - )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) #if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) #define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode #define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode @@ -1622,9 +1525,9 @@ extern "C" { #define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase #define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program -/** + /** * @} - */ + */ /** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose * @{ @@ -1634,8 +1537,7 @@ extern "C" { #define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter #define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ - )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) #if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) #define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT @@ -1660,9 +1562,9 @@ extern "C" { #define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA #define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA #endif /* STM32F4 */ -/** + /** * @} - */ + */ /** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose * @{ @@ -1717,82 +1619,9 @@ extern "C" { #define PWR_MODE_EVT PWR_PVD_MODE_NORMAL -#if defined (STM32U5) -#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP -#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP -#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP -#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP -#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP -#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP -#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP -#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP -#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP -#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP -#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP -#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP -#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP - -#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP -#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP -#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP - -#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP -#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP -#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP -#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP -#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP -#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP -#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP -#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP -#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP -#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP -#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP -#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP -#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP -#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP - -#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP - -#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP -#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP -#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP -#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP -#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP -#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP -#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP -#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP -#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP -#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP -#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP -#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP -#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP -#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP - -#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP -#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP -#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP -#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP -#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP -#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP -#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP -#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP - -#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY -#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY -#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY - -#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN -#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN -#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN -#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN -#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN - -#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK -#endif - -/** + /** * @} - */ + */ /** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose * @{ @@ -2041,15 +1870,15 @@ extern "C" { #define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC #define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC #if defined(STM32H7) -#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 -#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 -#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 -#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 #else -#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG -#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG -#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG -#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG #endif /* STM32H7 */ #define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT #define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT @@ -2260,8 +2089,8 @@ extern "C" { */ #define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ - ((WAVE) == DAC_WAVE_NOISE)|| \ - ((WAVE) == DAC_WAVE_TRIANGLE)) + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) /** * @} @@ -2317,7 +2146,7 @@ extern "C" { #define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT #if defined(STM32H7) -#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG + #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG #endif /** @@ -2454,8 +2283,7 @@ extern "C" { #define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI #define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ - )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) #define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE #define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE @@ -3423,7 +3251,7 @@ extern "C" { #define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK #define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 -#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) || defined(STM32C0) +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) #define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE #else #define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK @@ -3535,38 +3363,6 @@ extern "C" { #define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 #define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 #define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 -#if defined(STM32U5) -#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL -#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL -#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE -#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE -#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE -#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE -#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE -#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE -#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE -#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE -#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE -#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT -#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK -#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 -#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 -#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 -#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK -#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE -#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE -#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED -#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED -#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET -#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE -#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE -#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE -#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE -#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG -#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE -#endif /* STM32U5 */ /** * @} @@ -3584,9 +3380,7 @@ extern "C" { /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx)|| \ - defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \ - defined (STM32C0) +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) #else #define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG #endif @@ -3606,19 +3400,19 @@ extern "C" { #else #define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) #define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) #define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) #define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) #define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) #endif /* STM32F1 */ #define IS_ALARM IS_RTC_ALARM @@ -3643,22 +3437,13 @@ extern "C" { * @} */ -/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose * @{ */ #define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE #define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS -#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) -#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE -#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE -#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE - -#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV -#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV -#endif - #if defined(STM32F4) || defined(STM32F2) #define SD_SDMMC_DISABLED SD_SDIO_DISABLED #define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY @@ -3811,13 +3596,6 @@ extern "C" { #define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE #define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE -#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) -#define USART_OVERSAMPLING_16 0x00000000U -#define USART_OVERSAMPLING_8 USART_CR1_OVER8 - -#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ - ((__SAMPLING__) == USART_OVERSAMPLING_8)) -#endif /* STM32F0 || STM32F3 || STM32F7 */ /** * @} */ @@ -3987,16 +3765,6 @@ extern "C" { * @} */ -/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined (STM32F7) -#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE -#endif /* STM32F7 */ -/** - * @} - */ - /** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose * @{ */ @@ -4011,4 +3779,5 @@ extern "C" { #endif /* STM32_HAL_LEGACY */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h new file mode 100644 index 0000000..2446b0a --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h @@ -0,0 +1,128 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_can_ex_legacy.h + * @author MCD Application Team + * @brief Header file of CAN HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_CAN_EX_LEGACY_H +#define __STM32F1xx_HAL_CAN_EX_LEGACY_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ + defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup CANEx CANEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief CAN filter configuration structure definition + */ +/* CAN filter banks differences over STM32F1 devices: */ +/* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2 */ +/* - Other STM32F10x devices: 14 filter banks */ + +typedef struct +{ + uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. + This parameter must be a number between Min_Data = 0 and Max_Data = 27. */ +#else + uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. + This parameter must be a number between Min_Data = 0 and Max_Data = 13. */ +#endif /* STM32F105xC || STM32F107xC */ + uint32_t FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint32_t FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + uint32_t FilterActivation; /*!< Enable or disable the filter. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t BankNumber; /*!< Select the start slave bank filter + This parameter must be a number between Min_Data = 0 and Max_Data = 28. */ + +}CAN_FilterConfTypeDef; + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup CANEx_Private_Macros CAN Extended Private Macros + * @{ + */ +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U) +#else +#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13U) +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_CAN_EX_LEGACY_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_can_legacy.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h similarity index 66% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_can_legacy.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h index e4d774b..0d2ba41 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_can_legacy.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h @@ -1,38 +1,53 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_can_legacy.h + * @file stm32f1xx_hal_can_legacy.h * @author MCD Application Team * @brief Header file of CAN HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© COPYRIGHT(c) 2017 STMicroelectronics

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CAN_LEGACY_H -#define __STM32F4xx_HAL_CAN_LEGACY_H +#ifndef __STM32F1xx_HAL_CAN_LEGACY_H +#define __STM32F1xx_HAL_CAN_LEGACY_H #ifdef __cplusplus extern "C" { #endif + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ + defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -106,51 +121,8 @@ typedef struct This parameter can be set to ENABLE or DISABLE */ }CAN_InitTypeDef; -/** - * @brief CAN filter configuration structure definition - */ -typedef struct -{ - uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit - configuration, first one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit - configuration, second one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, - according to the mode (MSBs for a 32-bit configuration, - first one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, - according to the mode (LSBs for a 32-bit configuration, - second one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. - This parameter can be a value of @ref CAN_filter_FIFO */ - - uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. - This parameter must be a number between Min_Data = 0 and Max_Data = 27 */ - - uint32_t FilterMode; /*!< Specifies the filter mode to be initialized. - This parameter can be a value of @ref CAN_filter_mode */ - - uint32_t FilterScale; /*!< Specifies the filter scale. - This parameter can be a value of @ref CAN_filter_scale */ - - uint32_t FilterActivation; /*!< Enable or disable the filter. - This parameter can be set to ENABLE or DISABLE. */ - - uint32_t BankNumber; /*!< Select the start slave bank filter. - This parameter must be a number between Min_Data = 0 and Max_Data = 28 */ - -}CAN_FilterConfTypeDef; - -/** - * @brief CAN Tx message structure definition +/** + * @brief CAN Tx message structure definition */ typedef struct { @@ -257,11 +229,11 @@ typedef struct * @} */ -/** @defgroup CAN_InitStatus CAN InitStatus +/** @defgroup CAN_InitStatus CAN initialization Status * @{ */ -#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */ -#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */ +#define CAN_INITSTATUS_FAILED 0x00000000U /*!< CAN initialization failed */ +#define CAN_INITSTATUS_SUCCESS 0x00000001U /*!< CAN initialization OK */ /** * @} */ @@ -277,7 +249,7 @@ typedef struct * @} */ -/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width +/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width * @{ */ #define CAN_SJW_1TQ 0x00000000U /*!< 1 time quantum */ @@ -288,7 +260,7 @@ typedef struct * @} */ -/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1 +/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1 * @{ */ #define CAN_BS1_1TQ 0x00000000U /*!< 1 time quantum */ @@ -371,7 +343,15 @@ typedef struct * @} */ -/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants +/** @defgroup CAN_transmit_constants CAN Transmit Constants + * @{ + */ +#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */ +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number * @{ */ #define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ @@ -389,37 +369,36 @@ typedef struct CAN_GetFlagStatus() function. */ /* Transmit Flags */ -#define CAN_FLAG_RQCP0 0x00000500U /*!< Request MailBox0 flag */ -#define CAN_FLAG_RQCP1 0x00000508U /*!< Request MailBox1 flag */ -#define CAN_FLAG_RQCP2 0x00000510U /*!< Request MailBox2 flag */ -#define CAN_FLAG_TXOK0 0x00000501U /*!< Transmission OK MailBox0 flag */ -#define CAN_FLAG_TXOK1 0x00000509U /*!< Transmission OK MailBox1 flag */ -#define CAN_FLAG_TXOK2 0x00000511U /*!< Transmission OK MailBox2 flag */ -#define CAN_FLAG_TME0 0x0000051AU /*!< Transmit mailbox 0 empty flag */ -#define CAN_FLAG_TME1 0x0000051BU /*!< Transmit mailbox 0 empty flag */ -#define CAN_FLAG_TME2 0x0000051CU /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_RQCP0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP0_BIT_POSITION)) /*!< Request MailBox0 flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP1_BIT_POSITION)) /*!< Request MailBox1 flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP2_BIT_POSITION)) /*!< Request MailBox2 flag */ +#define CAN_FLAG_TXOK0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK0_BIT_POSITION)) /*!< Transmission OK MailBox0 flag */ +#define CAN_FLAG_TXOK1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK1_BIT_POSITION)) /*!< Transmission OK MailBox1 flag */ +#define CAN_FLAG_TXOK2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK2_BIT_POSITION)) /*!< Transmission OK MailBox2 flag */ +#define CAN_FLAG_TME0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME0_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_TME1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME1_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_TME2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME2_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ /* Receive Flags */ -#define CAN_FLAG_FF0 0x00000203U /*!< FIFO 0 Full flag */ -#define CAN_FLAG_FOV0 0x00000204U /*!< FIFO 0 Overrun flag */ +#define CAN_FLAG_FF0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FF0_BIT_POSITION)) /*!< FIFO 0 Full flag */ +#define CAN_FLAG_FOV0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FOV0_BIT_POSITION)) /*!< FIFO 0 Overrun flag */ -#define CAN_FLAG_FF1 0x00000403U /*!< FIFO 1 Full flag */ -#define CAN_FLAG_FOV1 0x00000404U /*!< FIFO 1 Overrun flag */ +#define CAN_FLAG_FF1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FF1_BIT_POSITION)) /*!< FIFO 1 Full flag */ +#define CAN_FLAG_FOV1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FOV1_BIT_POSITION)) /*!< FIFO 1 Overrun flag */ /* Operating Mode Flags */ -#define CAN_FLAG_INAK 0x00000100U /*!< Initialization acknowledge flag */ -#define CAN_FLAG_SLAK 0x00000101U /*!< Sleep acknowledge flag */ -#define CAN_FLAG_ERRI 0x00000102U /*!< Error flag */ -#define CAN_FLAG_WKU 0x00000103U /*!< Wake up flag */ -#define CAN_FLAG_SLAKI 0x00000104U /*!< Sleep acknowledge flag */ +#define CAN_FLAG_WKU ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_WKU_BIT_POSITION)) /*!< Wake up flag */ +#define CAN_FLAG_SLAK ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAK_BIT_POSITION)) /*!< Sleep acknowledge flag */ +#define CAN_FLAG_SLAKI ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAKI_BIT_POSITION)) /*!< Sleep acknowledge flag */ -/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. +/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. In this case the SLAK bit can be polled.*/ /* Error Flags */ -#define CAN_FLAG_EWG 0x00000300U /*!< Error warning flag */ -#define CAN_FLAG_EPV 0x00000301U /*!< Error passive flag */ -#define CAN_FLAG_BOF 0x00000302U /*!< Bus-Off flag */ +#define CAN_FLAG_EWG ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EWG_BIT_POSITION)) /*!< Error warning flag */ +#define CAN_FLAG_EPV ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EPV_BIT_POSITION)) /*!< Error passive flag */ +#define CAN_FLAG_BOF ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_BOF_BIT_POSITION)) /*!< Bus-Off flag */ + /** * @} */ @@ -451,9 +430,54 @@ typedef struct * @} */ -/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition +/** + * @} + */ + +/** @defgroup CAN_Private_Constants CAN Private Constants * @{ */ + +/* CAN intermediate shift values used for CAN flags */ +#define TSR_REGISTER_INDEX 0x5U +#define RF0R_REGISTER_INDEX 0x2U +#define RF1R_REGISTER_INDEX 0x4U +#define MSR_REGISTER_INDEX 0x1U +#define ESR_REGISTER_INDEX 0x3U + +/* CAN flags bits position into their respective register (TSR, RF0R, RF1R or MSR regsiters) */ +/* Transmit Flags */ +#define CAN_TSR_RQCP0_BIT_POSITION 0x00000000U +#define CAN_TSR_RQCP1_BIT_POSITION 0x00000008U +#define CAN_TSR_RQCP2_BIT_POSITION 0x00000010U +#define CAN_TSR_TXOK0_BIT_POSITION 0x00000001U +#define CAN_TSR_TXOK1_BIT_POSITION 0x00000009U +#define CAN_TSR_TXOK2_BIT_POSITION 0x00000011U +#define CAN_TSR_TME0_BIT_POSITION 0x0000001AU +#define CAN_TSR_TME1_BIT_POSITION 0x0000001BU +#define CAN_TSR_TME2_BIT_POSITION 0x0000001CU + +/* Receive Flags */ +#define CAN_RF0R_FF0_BIT_POSITION 0x00000003U +#define CAN_RF0R_FOV0_BIT_POSITION 0x00000004U + +#define CAN_RF1R_FF1_BIT_POSITION 0x00000003U +#define CAN_RF1R_FOV1_BIT_POSITION 0x00000004U + +/* Operating Mode Flags */ +#define CAN_MSR_WKU_BIT_POSITION 0x00000003U +#define CAN_MSR_SLAK_BIT_POSITION 0x00000001U +#define CAN_MSR_SLAKI_BIT_POSITION 0x00000004U + +/* Error Flags */ +#define CAN_ESR_EWG_BIT_POSITION 0x00000000U +#define CAN_ESR_EPV_BIT_POSITION 0x00000001U +#define CAN_ESR_BOF_BIT_POSITION 0x00000002U + +/* Mask used by macro to get/clear CAN flags*/ +#define CAN_FLAG_MASK 0x000000FFU + +/* Mailboxes definition */ #define CAN_TXMAILBOX_0 ((uint8_t)0x00) #define CAN_TXMAILBOX_1 ((uint8_t)0x01) #define CAN_TXMAILBOX_2 ((uint8_t)0x02) @@ -461,49 +485,75 @@ typedef struct * @} */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ /** @defgroup CAN_Exported_Macros CAN Exported Macros * @{ */ -/** @brief Reset CAN handle state - * @param __HANDLE__ specifies the CAN Handle. +/** @brief Reset CAN handle state + * @param __HANDLE__: CAN handle. * @retval None */ #define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET) /** - * @brief Enable the specified CAN interrupts. - * @param __HANDLE__ CAN handle - * @param __INTERRUPT__ CAN Interrupt - * @retval None + * @brief Enable the specified CAN interrupts + * @param __HANDLE__: CAN handle. + * @param __INTERRUPT__: CAN Interrupt. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable + * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt + * @arg CAN_IT_FF0 : FIFO 0 full interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt + * @arg CAN_IT_FF1 : FIFO 1 full interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt + * @arg CAN_IT_WKU : Wake-up interrupt + * @arg CAN_IT_SLK : Sleep acknowledge interrupt + * @arg CAN_IT_EWG : Error warning interrupt + * @arg CAN_IT_EPV : Error passive interrupt + * @arg CAN_IT_BOF : Bus-off interrupt + * @arg CAN_IT_LEC : Last error code interrupt + * @arg CAN_IT_ERR : Error Interrupt + * @retval None. */ #define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) /** - * @brief Disable the specified CAN interrupts. - * @param __HANDLE__ CAN handle - * @param __INTERRUPT__ CAN Interrupt - * @retval None + * @brief Disable the specified CAN interrupts + * @param __HANDLE__: CAN handle. + * @param __INTERRUPT__: CAN Interrupt. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable + * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt + * @arg CAN_IT_FF0 : FIFO 0 full interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt + * @arg CAN_IT_FF1 : FIFO 1 full interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt + * @arg CAN_IT_WKU : Wake-up interrupt + * @arg CAN_IT_SLK : Sleep acknowledge interrupt + * @arg CAN_IT_EWG : Error warning interrupt + * @arg CAN_IT_EPV : Error passive interrupt + * @arg CAN_IT_BOF : Bus-off interrupt + * @arg CAN_IT_LEC : Last error code interrupt + * @arg CAN_IT_ERR : Error Interrupt + * @retval None. */ #define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) /** * @brief Return the number of pending received messages. - * @param __HANDLE__ CAN handle - * @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @param __HANDLE__: CAN handle. + * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. * @retval The number of pending message. */ #define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ -((uint8_t)((__HANDLE__)->Instance->RF0R&0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U))) +((uint8_t)((__HANDLE__)->Instance->RF0R & 0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U))) /** @brief Check whether the specified CAN flag is set or not. - * @param __HANDLE__ CAN Handle - * @param __FLAG__ specifies the flag to check. + * @param __HANDLE__: specifies the CAN Handle. + * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg CAN_TSR_RQCP0: Request MailBox0 Flag * @arg CAN_TSR_RQCP1: Request MailBox1 Flag @@ -536,8 +586,8 @@ typedef struct ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK)))) /** @brief Clear the specified CAN pending flag. - * @param __HANDLE__ CAN Handle. - * @param __FLAG__ specifies the flag to check. + * @param __HANDLE__: specifies the CAN Handle. + * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg CAN_TSR_RQCP0: Request MailBox0 Flag * @arg CAN_TSR_RQCP1: Request MailBox1 Flag @@ -555,52 +605,62 @@ typedef struct * @arg CAN_FLAG_FF1: FIFO 1 Full Flag * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag * @arg CAN_FLAG_WKU: Wake up Flag - * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__HANDLE__)->Instance->MSR) = ((uint32_t)1U << ((__FLAG__) & CAN_FLAG_MASK)))) +((((__FLAG__) >> 8U) == TSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == RF0R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == RF1R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == MSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U) /** @brief Check if the specified CAN interrupt source is enabled or disabled. - * @param __HANDLE__ CAN Handle - * @param __INTERRUPT__ specifies the CAN interrupt source to check. - * This parameter can be one of the following values: - * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable - * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable - * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable + * @param __HANDLE__: specifies the CAN Handle. + * @param __INTERRUPT__: specifies the CAN interrupt source to check. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable + * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt + * @arg CAN_IT_FF0 : FIFO 0 full interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt + * @arg CAN_IT_FF1 : FIFO 1 full interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt + * @arg CAN_IT_WKU : Wake-up interrupt + * @arg CAN_IT_SLK : Sleep acknowledge interrupt + * @arg CAN_IT_EWG : Error warning interrupt + * @arg CAN_IT_EPV : Error passive interrupt + * @arg CAN_IT_BOF : Bus-off interrupt + * @arg CAN_IT_LEC : Last error code interrupt + * @arg CAN_IT_ERR : Error Interrupt * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** * @brief Check the transmission status of a CAN Frame. - * @param __HANDLE__ CAN Handle - * @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission. + * @param __HANDLE__: specifies the CAN Handle. + * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. * @retval The new status of transmission (TRUE or FALSE). */ #define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\ -(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\ - ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\ - ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2))) +(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\ + ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\ + ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2))) /** * @brief Release the specified receive FIFO. - * @param __HANDLE__ CAN handle - * @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval None + * @param __HANDLE__: CAN handle. + * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval None. */ #define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ -((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1)) +((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1)) /** * @brief Cancel a transmit request. - * @param __HANDLE__ CAN Handle - * @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission. - * @retval None + * @param __HANDLE__: specifies the CAN Handle. + * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. + * @retval None. */ #define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\ (((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\ @@ -608,12 +668,12 @@ typedef struct ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2)) /** - * @brief Enable or disable the DBG Freeze for CAN. - * @param __HANDLE__ CAN Handle - * @param __NEWSTATE__ new state of the CAN peripheral. - * This parameter can be: ENABLE (CAN reception/transmission is frozen - * during debug. Reception FIFOs can still be accessed/controlled normally) - * or DISABLE (CAN is working during debug). + * @brief Enable or disables the DBG Freeze for CAN. + * @param __HANDLE__: specifies the CAN Handle. + * @param __NEWSTATE__: new state of the CAN peripheral. + * This parameter can be: ENABLE (CAN reception/transmission is frozen + * during debug. Reception FIFOs can still be accessed/controlled normally) + * or DISABLE (CAN is working during debug). * @retval None */ #define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \ @@ -623,15 +683,19 @@ typedef struct * @} */ +/* Include CAN HAL Extension module */ +#include "stm32f1xx_hal_can_ex_legacy.h" + /* Exported functions --------------------------------------------------------*/ /** @addtogroup CAN_Exported_Functions * @{ */ /** @addtogroup CAN_Exported_Functions_Group1 + * @brief Initialization and Configuration functions * @{ */ -/* Initialization/de-initialization functions ***********************************/ +/* Initialization and de-initialization functions *****************************/ HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan); HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig); HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan); @@ -642,9 +706,10 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan); */ /** @addtogroup CAN_Exported_Functions_Group2 + * @brief I/O operation functions * @{ */ -/* I/O operation functions ******************************************************/ +/* I/O operation functions *****************************************************/ HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout); HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan); HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout); @@ -660,9 +725,10 @@ void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan); */ /** @addtogroup CAN_Exported_Functions_Group3 + * @brief CAN Peripheral State functions * @{ */ -/* Peripheral State functions ***************************************************/ +/* Peripheral State and Error functions ***************************************/ uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan); HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); /** @@ -673,38 +739,11 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); * @} */ -/* Private types -------------------------------------------------------------*/ -/** @defgroup CAN_Private_Types CAN Private Types +/* Private macros --------------------------------------------------------*/ +/** @defgroup CAN_Private_Macros CAN Private Macros * @{ */ -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CAN_Private_Variables CAN Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CAN_Private_Constants CAN Private Constants - * @{ - */ -#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */ -#define CAN_FLAG_MASK 0x000000FFU -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CAN_Private_Macros CAN Private Macros - * @{ - */ #define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \ ((MODE) == CAN_MODE_LOOPBACK)|| \ ((MODE) == CAN_MODE_SILENT) || \ @@ -714,7 +753,7 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); #define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ) #define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ) #define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U)) -#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U) + #define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \ ((MODE) == CAN_FILTERMODE_IDLIST)) #define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \ @@ -724,7 +763,7 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); #define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U) #define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FFU)) +#define IS_CAN_STDID(STDID) ((STDID) <= 0x00007FFU) #define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU) #define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) @@ -737,19 +776,6 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); * @} */ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CAN_Private_Functions CAN Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - /** * @} */ @@ -758,8 +784,13 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); * @} */ +#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */ + #ifdef __cplusplus } #endif -#endif /* __STM32F4xx_HAL_CAN_LEGACY_H */ +#endif /* __STM32F1xx_HAL_CAN_LEGACY_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32_assert_template.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32_assert_template.h similarity index 70% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32_assert_template.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32_assert_template.h index 3ae73f0..011d57c 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32_assert_template.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32_assert_template.h @@ -8,12 +8,13 @@ ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -23,7 +24,7 @@ #define __STM32_ASSERT_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Exported types ------------------------------------------------------------*/ @@ -39,11 +40,11 @@ * If expr is true, it returns no value. * @retval None */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) /* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); +void assert_failed(uint8_t* file, uint32_t line); #else - #define assert_param(expr) ((void)0U) +#define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ #ifdef __cplusplus @@ -53,4 +54,4 @@ #endif /* __STM32_ASSERT_H */ - +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h new file mode 100644 index 0000000..35092c0 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h @@ -0,0 +1,358 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_H +#define __STM32F1xx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_conf.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode + * @brief Freeze/Unfreeze Peripherals in Debug mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @{ + */ + +/* Peripherals on APB1 */ +/** + * @brief TIM2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) + +/** + * @brief TIM3 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) + +#if defined (DBGMCU_CR_DBG_TIM4_STOP) +/** + * @brief TIM4 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM5_STOP) +/** + * @brief TIM5 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM6_STOP) +/** + * @brief TIM6 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM7_STOP) +/** + * @brief TIM7 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM12_STOP) +/** + * @brief TIM12 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM13_STOP) +/** + * @brief TIM13 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM14_STOP) +/** + * @brief TIM14 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) +#endif + +/** + * @brief WWDG Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) + +/** + * @brief IWDG Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) + +/** + * @brief I2C1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) + +#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +/** + * @brief I2C2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +#endif + +#if defined (DBGMCU_CR_DBG_CAN1_STOP) +/** + * @brief CAN1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_CAN2_STOP) +/** + * @brief CAN2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) +#endif + +/* Peripherals on APB2 */ +#if defined (DBGMCU_CR_DBG_TIM1_STOP) +/** + * @brief TIM1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM8_STOP) +/** + * @brief TIM8 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM9_STOP) +/** + * @brief TIM9 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM10_STOP) +/** + * @brief TIM10 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM11_STOP) +/** + * @brief TIM11 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) +#endif + + +#if defined (DBGMCU_CR_DBG_TIM15_STOP) +/** + * @brief TIM15 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM16_STOP) +/** + * @brief TIM16 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM17_STOP) +/** + * @brief TIM17 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) +#endif + +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Functions + * @{ + */ +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Variables HAL Private Variables + * @{ + */ +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h new file mode 100644 index 0000000..8b49282 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h @@ -0,0 +1,1004 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_adc.h + * @author MCD Application Team + * @brief Header file containing functions prototypes of ADC HAL library. + ****************************************************************************** + * @attention + * + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_ADC_H +#define __STM32F1xx_HAL_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief Structure definition of ADC and regular group initialization + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (affects regular and injected groups): DataAlign, ScanConvMode. + * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv. + * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state. + * ADC can be either disabled or enabled without conversion on going on regular group. + */ +typedef struct +{ + uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting) + or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3). + This parameter can be a value of @ref ADC_Data_align */ + uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups. + This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. + If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1). + Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1). + If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank). + Scan direction is upward: from rank1 to rank 'n'. + This parameter can be a value of @ref ADC_Scan_mode + Note: For regular group, this parameter should be enabled in conversion either by polling (HAL_ADC_Start with Discontinuous mode and NbrOfDiscConversion=1) + or by DMA (HAL_ADC_Start_DMA), but not by interruption (HAL_ADC_Start_IT): in scan mode, interruption is triggered only on the + the last conversion of the sequence. All previous conversions would be overwritten by the last one. + Injected group used with scan mode has not this constraint: each rank has its own result register, no data is overwritten. */ + FunctionalState ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group, + after the selected trigger occurred (software start or external trigger). + This parameter can be set to ENABLE or DISABLE. */ + uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer. + To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 16. */ + FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. */ + uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided. + If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ + uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group. + If set to ADC_SOFTWARE_START, external triggers are disabled. + If set to external trigger source, triggering is on event rising edge. + This parameter can be a value of @ref ADC_External_trigger_source_Regular */ +}ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC can be either disabled or enabled without conversion on going on regular group. + */ +typedef struct +{ + uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_channels + Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. + Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor) + Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger. + It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel. + Refer to errata sheet of these devices for more details. */ + uint32_t Rank; /*!< Specifies the rank in the regular group sequencer + This parameter can be a value of @ref ADC_regular_rank + Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits). + This parameter can be a value of @ref ADC_sampling_times + Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. + If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. + Note: In case of usage of internal measurement channels (VrefInt/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */ +}ADC_ChannelConfTypeDef; + +/** + * @brief ADC Configuration analog watchdog definition + * @note The setting of these parameters with function is conditioned to ADC state. + * ADC state can be either disabled or enabled without conversion on going on regular and injected groups. + */ +typedef struct +{ + uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all channels, regular/injected group. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog. + This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode) + This parameter can be a value of @ref ADC_channels. */ + FunctionalState ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. + This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. + This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ + uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */ +}ADC_AnalogWDGConfTypeDef; + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET 0x00000000U /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY 0x00000001U /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL 0x00000002U /*!< ADC is busy to internal process (initialization, calibration) */ +#define HAL_ADC_STATE_TIMEOUT 0x00000004U /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL 0x00000010U /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG 0x00000020U /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA 0x00000040U /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY 0x00000100U /*!< A conversion on group regular is ongoing or can occur (either by continuous mode, + external trigger, low power auto power-on, multimode ADC master control) */ +#define HAL_ADC_STATE_REG_EOC 0x00000200U /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR 0x00000400U /*!< Not available on STM32F1 device: Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP 0x00000800U /*!< Not available on STM32F1 device: End Of Sampling flag raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY 0x00001000U /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode, + external trigger, low power auto power-on, multimode ADC master control) */ +#define HAL_ADC_STATE_INJ_EOC 0x00002000U /*!< Conversion data available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF 0x00004000U /*!< Not available on STM32F1 device: Injected queue overflow occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 0x00010000U /*!< Out-of-window occurrence of analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 0x00020000U /*!< Not available on STM32F1 device: Out-of-window occurrence of analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 0x00040000U /*!< Not available on STM32F1 device: Out-of-window occurrence of analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE 0x00100000U /*!< ADC in multimode slave state, controlled by another ADC master ( */ + + +/** + * @brief ADC handle Structure definition + */ +typedef struct __ADC_HandleTypeDef +{ + ADC_TypeDef *Instance; /*!< Register base address */ + + ADC_InitTypeDef Init; /*!< ADC required parameters */ + + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + + HAL_LockTypeDef Lock; /*!< ADC locking object */ + + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + + __IO uint32_t ErrorCode; /*!< ADC Error code */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected conversion complete callback */ /*!< ADC end of sampling callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +}ADC_HandleTypeDef; + + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE 0x00U /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL 0x01U /*!< ADC IP internal error: if problem of clocking, + enable/disable, erroneous state */ +#define HAL_ADC_ERROR_OVR 0x02U /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA 0x04U /*!< DMA transfer error */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + + +/** @defgroup ADC_Data_align ADC data alignment + * @{ + */ +#define ADC_DATAALIGN_RIGHT 0x00000000U +#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN) +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC scan mode + * @{ + */ +/* Note: Scan mode values are not among binary choices ENABLE/DISABLE for */ +/* compatibility with other STM32 devices having a sequencer with */ +/* additional options. */ +#define ADC_SCAN_DISABLE 0x00000000U +#define ADC_SCAN_ENABLE ((uint32_t)ADC_CR1_SCAN) +/** + * @} + */ + +/** @defgroup ADC_External_trigger_edge_Regular ADC external trigger enable for regular group + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE 0x00000000U +#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTTRIG) +/** + * @} + */ + +/** @defgroup ADC_channels ADC channels + * @{ + */ +/* Note: Depending on devices, some channels may not be available on package */ +/* pins. Refer to device datasheet for channels availability. */ +#define ADC_CHANNEL_0 0x00000000U +#define ADC_CHANNEL_1 ((uint32_t)( ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_2 ((uint32_t)( ADC_SQR3_SQ1_1 )) +#define ADC_CHANNEL_3 ((uint32_t)( ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_4 ((uint32_t)( ADC_SQR3_SQ1_2 )) +#define ADC_CHANNEL_5 ((uint32_t)( ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_6 ((uint32_t)( ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 )) +#define ADC_CHANNEL_7 ((uint32_t)( ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_8 ((uint32_t)( ADC_SQR3_SQ1_3 )) +#define ADC_CHANNEL_9 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_10 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1 )) +#define ADC_CHANNEL_11 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_12 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 )) +#define ADC_CHANNEL_13 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_14 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 )) +#define ADC_CHANNEL_15 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0)) +#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ1_4 )) +#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_0)) + +#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 /* ADC internal channel (no connection on device pin) */ +#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17 /* ADC internal channel (no connection on device pin) */ +/** + * @} + */ + +/** @defgroup ADC_sampling_times ADC sampling times + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 0x00000000U /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t)( ADC_SMPR2_SMP0_0)) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t)( ADC_SMPR2_SMP0_1 )) /*!< Sampling time 13.5 ADC clock cycles */ +#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)( ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 28.5 ADC clock cycles */ +#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 )) /*!< Sampling time 41.5 ADC clock cycles */ +#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 55.5 ADC clock cycles */ +#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1 )) /*!< Sampling time 71.5 ADC clock cycles */ +#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 239.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_regular_rank ADC rank into regular group + * @{ + */ +#define ADC_REGULAR_RANK_1 0x00000001U +#define ADC_REGULAR_RANK_2 0x00000002U +#define ADC_REGULAR_RANK_3 0x00000003U +#define ADC_REGULAR_RANK_4 0x00000004U +#define ADC_REGULAR_RANK_5 0x00000005U +#define ADC_REGULAR_RANK_6 0x00000006U +#define ADC_REGULAR_RANK_7 0x00000007U +#define ADC_REGULAR_RANK_8 0x00000008U +#define ADC_REGULAR_RANK_9 0x00000009U +#define ADC_REGULAR_RANK_10 0x0000000AU +#define ADC_REGULAR_RANK_11 0x0000000BU +#define ADC_REGULAR_RANK_12 0x0000000CU +#define ADC_REGULAR_RANK_13 0x0000000DU +#define ADC_REGULAR_RANK_14 0x0000000EU +#define ADC_REGULAR_RANK_15 0x0000000FU +#define ADC_REGULAR_RANK_16 0x00000010U +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE 0x00000000U +#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN)) +#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN)) +#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) +#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN) +#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN) +#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) +/** + * @} + */ + +/** @defgroup ADC_conversion_group ADC conversion group + * @{ + */ +#define ADC_REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC)) +#define ADC_INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC)) +#define ADC_REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_JEOC)) +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog event */ + +#define ADC_AWD1_EVENT ADC_AWD_EVENT /*!< ADC Analog watchdog 1 event: Alternate naming for compatibility with other STM32 devices having several analog watchdogs */ +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_EOC ADC_CR1_EOCIE /*!< ADC End of Regular Conversion interrupt source */ +#define ADC_IT_JEOC ADC_CR1_JEOCIE /*!< ADC End of Injected Conversion interrupt source */ +#define ADC_IT_AWD ADC_CR1_AWDIE /*!< ADC Analog watchdog interrupt source */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_STRT ADC_SR_STRT /*!< ADC Regular group start flag */ +#define ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC Injected group start flag */ +#define ADC_FLAG_EOC ADC_SR_EOC /*!< ADC End of Regular conversion flag */ +#define ADC_FLAG_JEOC ADC_SR_JEOC /*!< ADC End of Injected conversion flag */ +#define ADC_FLAG_AWD ADC_SR_AWD /*!< ADC Analog watchdog flag */ +/** + * @} + */ + + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ + +/** @addtogroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/** @defgroup ADC_conversion_cycles ADC conversion cycles + * @{ + */ +/* ADC conversion cycles (unit: ADC clock cycles) */ +/* (selected sampling time + conversion time of 12.5 ADC clock cycles, with */ +/* resolution 12 bits) */ +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_1CYCLE5 14U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 20U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_13CYCLES5 26U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5 41U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_41CYCLES5 54U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_55CYCLES5 68U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 84U +#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5 252U +/** + * @} + */ + +/** @defgroup ADC_sampling_times_all_channels ADC sampling times all channels + * @{ + */ +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 \ + (ADC_SMPR2_SMP9_2 | ADC_SMPR2_SMP8_2 | ADC_SMPR2_SMP7_2 | ADC_SMPR2_SMP6_2 | \ + ADC_SMPR2_SMP5_2 | ADC_SMPR2_SMP4_2 | ADC_SMPR2_SMP3_2 | ADC_SMPR2_SMP2_2 | \ + ADC_SMPR2_SMP1_2 | ADC_SMPR2_SMP0_2) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 \ + (ADC_SMPR1_SMP17_2 | ADC_SMPR1_SMP16_2 | ADC_SMPR1_SMP15_2 | ADC_SMPR1_SMP14_2 | \ + ADC_SMPR1_SMP13_2 | ADC_SMPR1_SMP12_2 | ADC_SMPR1_SMP11_2 | ADC_SMPR1_SMP10_2 ) + +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 \ + (ADC_SMPR2_SMP9_1 | ADC_SMPR2_SMP8_1 | ADC_SMPR2_SMP7_1 | ADC_SMPR2_SMP6_1 | \ + ADC_SMPR2_SMP5_1 | ADC_SMPR2_SMP4_1 | ADC_SMPR2_SMP3_1 | ADC_SMPR2_SMP2_1 | \ + ADC_SMPR2_SMP1_1 | ADC_SMPR2_SMP0_1) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 \ + (ADC_SMPR1_SMP17_1 | ADC_SMPR1_SMP16_1 | ADC_SMPR1_SMP15_1 | ADC_SMPR1_SMP14_1 | \ + ADC_SMPR1_SMP13_1 | ADC_SMPR1_SMP12_1 | ADC_SMPR1_SMP11_1 | ADC_SMPR1_SMP10_1 ) + +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0 \ + (ADC_SMPR2_SMP9_0 | ADC_SMPR2_SMP8_0 | ADC_SMPR2_SMP7_0 | ADC_SMPR2_SMP6_0 | \ + ADC_SMPR2_SMP5_0 | ADC_SMPR2_SMP4_0 | ADC_SMPR2_SMP3_0 | ADC_SMPR2_SMP2_0 | \ + ADC_SMPR2_SMP1_0 | ADC_SMPR2_SMP0_0) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0 \ + (ADC_SMPR1_SMP17_0 | ADC_SMPR1_SMP16_0 | ADC_SMPR1_SMP15_0 | ADC_SMPR1_SMP14_0 | \ + ADC_SMPR1_SMP13_0 | ADC_SMPR1_SMP12_0 | ADC_SMPR1_SMP11_0 | ADC_SMPR1_SMP10_0 ) + +#define ADC_SAMPLETIME_1CYCLE5_SMPR2ALLCHANNELS 0x00000000U +#define ADC_SAMPLETIME_7CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0) +#define ADC_SAMPLETIME_13CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) +#define ADC_SAMPLETIME_28CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0) +#define ADC_SAMPLETIME_41CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) +#define ADC_SAMPLETIME_55CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0) +#define ADC_SAMPLETIME_71CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) +#define ADC_SAMPLETIME_239CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0) + +#define ADC_SAMPLETIME_1CYCLE5_SMPR1ALLCHANNELS 0x00000000U +#define ADC_SAMPLETIME_7CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) +#define ADC_SAMPLETIME_13CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) +#define ADC_SAMPLETIME_28CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) +#define ADC_SAMPLETIME_41CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) +#define ADC_SAMPLETIME_55CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) +#define ADC_SAMPLETIME_71CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) +#define ADC_SAMPLETIME_239CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) +/** + * @} + */ + +/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_JEOC | ADC_FLAG_AWD ) + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** + * @brief Enable the ADC peripheral + * @note ADC enable requires a delay for ADC stabilization time + * (refer to device datasheet, parameter tSTAB) + * @note On STM32F1, if ADC is already enabled this macro trigs a conversion + * SW start on regular group. + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_ENABLE(__HANDLE__) \ + (SET_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_ADON))) + +/** + * @brief Disable the ADC peripheral + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_DISABLE(__HANDLE__) \ + (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_ADON))) + +/** @brief Enable the ADC end of conversion interrupt. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC Interrupt + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source + * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source + * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (SET_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__))) + +/** @brief Disable the ADC end of conversion interrupt. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC Interrupt + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source + * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source + * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (CLEAR_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__))) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC interrupt source to check + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source + * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source + * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source + * @retval None + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Get the selected ADC's flag status. + * @param __HANDLE__: ADC handle + * @param __FLAG__: ADC flag + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_STRT: ADC Regular group start flag + * @arg ADC_FLAG_JSTRT: ADC Injected group start flag + * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag + * @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag + * @arg ADC_FLAG_AWD: ADC Analog watchdog flag + * @retval None + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the ADC's pending flags + * @param __HANDLE__: ADC handle + * @param __FLAG__: ADC flag + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_STRT: ADC Regular group start flag + * @arg ADC_FLAG_JSTRT: ADC Injected group start flag + * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag + * @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag + * @arg ADC_FLAG_AWD: ADC Analog watchdog flag + * @retval None + */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (WRITE_REG((__HANDLE__)->Instance->SR, ~(__FLAG__))) + +/** @brief Reset ADC handle state + * @param __HANDLE__: ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif + +/** + * @} + */ + +/* Private macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Verification of ADC state: enabled or disabled + * @param __HANDLE__: ADC handle + * @retval SET (ADC enabled) or RESET (ADC disabled) + */ +#define ADC_IS_ENABLE(__HANDLE__) \ + ((( ((__HANDLE__)->Instance->CR2 & ADC_CR2_ADON) == ADC_CR2_ADON ) \ + ) ? SET : RESET) + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__: ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (READ_BIT((__HANDLE__)->Instance->CR2, ADC_CR2_EXTSEL) == ADC_SOFTWARE_START) + +/** + * @brief Test if conversion trigger of injected group is software start + * or external trigger. + * @param __HANDLE__: ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \ + (READ_BIT((__HANDLE__)->Instance->CR2, ADC_CR2_JEXTSEL) == ADC_INJECTED_SOFTWARE_START) + +/** + * @brief Simultaneously clears and sets specific bits of the handle State + * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Clear ADC error code (set it to error code: "no error") + * @param __HANDLE__: ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) \ + ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Set ADC number of conversions into regular channel sequence length. + * @param _NbrOfConversion_: Regular channel sequence length + * @retval None + */ +#define ADC_SQR1_L_SHIFT(_NbrOfConversion_) \ + (((_NbrOfConversion_) - (uint8_t)1) << ADC_SQR1_L_Pos) + +/** + * @brief Set the ADC's sample time for channel numbers between 10 and 18. + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (ADC_SMPR1_SMP11_Pos * ((_CHANNELNB_) - 10))) + +/** + * @brief Set the ADC's sample time for channel numbers between 0 and 9. + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (ADC_SMPR2_SMP1_Pos * (_CHANNELNB_))) + +/** + * @brief Set the selected regular channel rank for rank between 1 and 6. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (ADC_SQR3_SQ2_Pos * ((_RANKNB_) - 1))) + +/** + * @brief Set the selected regular channel rank for rank between 7 and 12. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (ADC_SQR2_SQ8_Pos * ((_RANKNB_) - 7))) + +/** + * @brief Set the selected regular channel rank for rank between 13 and 16. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (ADC_SQR1_SQ14_Pos * ((_RANKNB_) - 13))) + +/** + * @brief Set the injected sequence length. + * @param _JSQR_JL_: Sequence length. + * @retval None + */ +#define ADC_JSQR_JL_SHIFT(_JSQR_JL_) \ + (((_JSQR_JL_) -1) << ADC_JSQR_JL_Pos) + +/** + * @brief Set the selected injected channel rank + * Note: on STM32F1 devices, channel rank position in JSQR register + * is depending on total number of ranks selected into + * injected sequencer (ranks sequence starting from 4-JL) + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @param _JSQR_JL_: Sequence length. + * @retval None + */ +#define ADC_JSQR_RK_JL(_CHANNELNB_, _RANKNB_, _JSQR_JL_) \ + ((_CHANNELNB_) << (ADC_JSQR_JSQ2_Pos * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1))) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_: Continuous mode. + * @retval None + */ +#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) \ + ((_CONTINUOUS_MODE_) << ADC_CR2_CONT_Pos) + +/** + * @brief Configures the number of discontinuous conversions for the regular group channels. + * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions. + * @retval None + */ +#define ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) \ + (((_NBR_DISCONTINUOUS_CONV_) - 1) << ADC_CR1_DISCNUM_Pos) + +/** + * @brief Enable ADC scan mode to convert multiple ranks with sequencer. + * @param _SCAN_MODE_: Scan conversion mode. + * @retval None + */ +/* Note: Scan mode is compared to ENABLE for legacy purpose, this parameter */ +/* is equivalent to ADC_SCAN_ENABLE. */ +#define ADC_CR1_SCAN_SET(_SCAN_MODE_) \ + (( ((_SCAN_MODE_) == ADC_SCAN_ENABLE) || ((_SCAN_MODE_) == ENABLE) \ + )? (ADC_SCAN_ENABLE) : (ADC_SCAN_DISABLE) \ + ) + +/** + * @brief Get the maximum ADC conversion cycles on all channels. + * Returns the selected sampling time + conversion time (12.5 ADC clock cycles) + * Approximation of sampling time within 4 ranges, returns the highest value: + * below 7.5 cycles {1.5 cycle; 7.5 cycles}, + * between 13.5 cycles and 28.5 cycles {13.5 cycles; 28.5 cycles} + * between 41.5 cycles and 71.5 cycles {41.5 cycles; 55.5 cycles; 71.5cycles} + * equal to 239.5 cycles + * Unit: ADC clock cycles + * @param __HANDLE__: ADC handle + * @retval ADC conversion cycles on all channels + */ +#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \ + (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \ + (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \ + \ + (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \ + (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET) ) ? \ + ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5) \ + : \ + ((((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \ + (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET)) || \ + ((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET) && \ + (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET))) ? \ + ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5) \ + ) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \ + ((SCAN_MODE) == ADC_SCAN_ENABLE) ) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) ) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) ) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_239CYCLES_5) ) + +#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_10) || \ + ((CHANNEL) == ADC_REGULAR_RANK_11) || \ + ((CHANNEL) == ADC_REGULAR_RANK_12) || \ + ((CHANNEL) == ADC_REGULAR_RANK_13) || \ + ((CHANNEL) == ADC_REGULAR_RANK_14) || \ + ((CHANNEL) == ADC_REGULAR_RANK_15) || \ + ((CHANNEL) == ADC_REGULAR_RANK_16) ) + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) ) + +#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == ADC_REGULAR_GROUP) || \ + ((CONVERSION) == ADC_INJECTED_GROUP) || \ + ((CONVERSION) == ADC_REGULAR_INJECTED_GROUP) ) + +#define IS_ADC_EVENT_TYPE(EVENT) ((EVENT) == ADC_AWD_EVENT) + + +/** @defgroup ADC_range_verification ADC range verification + * For a unique ADC resolution: 12 bits + * @{ + */ +#define IS_ADC_RANGE(ADC_VALUE) ((ADC_VALUE) <= 0x0FFFU) +/** + * @} + */ + +/** @defgroup ADC_regular_nb_conv_verification ADC regular nb conv verification + * @{ + */ +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 16U)) +/** + * @} + */ + +/** @defgroup ADC_regular_discontinuous_mode_number_verification ADC regular discontinuous mode number verification + * @{ + */ +#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U)) +/** + * @} + */ + +/** + * @} + */ + +/* Include ADC HAL Extension module */ +#include "stm32f1xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @{ + */ + + +/* Initialization and de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* IO operation functions *****************************************************/ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @{ + */ + + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup ADC_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); +/** + * @} + */ + + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc); +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); +/** + * @} + */ + + +/** + * @} + */ + + +/* Internal HAL driver functions **********************************************/ +/** @addtogroup ADC_Private_Functions + * @{ + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc); +void ADC_StabilizationTime(uint32_t DelayUs); +void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +void ADC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F1xx_HAL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h new file mode 100644 index 0000000..21a8c9f --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h @@ -0,0 +1,710 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_ADC_EX_H +#define __STM32F1xx_HAL_ADC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADCEx Exported Types + * @{ + */ + +/** + * @brief ADC Configuration injected Channel structure definition + * @note Parameters of this structure are shared within 2 scopes: + * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset + * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, + * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv. + * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv') + * - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group. + */ +typedef struct +{ + uint32_t InjectedChannel; /*!< Selection of ADC channel to configure + This parameter can be a value of @ref ADC_channels + Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. + Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor) + Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger. + It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel. + Refer to errata sheet of these devices for more details. */ + uint32_t InjectedRank; /*!< Rank in the injected group sequencer + This parameter must be a value of @ref ADCEx_injected_rank + Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ + uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits). + This parameter can be a value of @ref ADC_sampling_times + Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. + If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. + Note: In case of usage of internal measurement channels (VrefInt/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */ + uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only). + Offset value must be a positive number. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), + this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ + uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer. + To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 4. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one + This parameter can be set to ENABLE or DISABLE. + Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) + Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START) + Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. + To maintain JAUTO always enabled, DMA must be configured in circular mode. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. + If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled. + If set to external trigger source, triggering is on event rising edge. + This parameter can be a value of @ref ADCEx_External_trigger_source_Injected + Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). + If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ +}ADC_InjectionConfTypeDef; + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/** + * @brief Structure definition of ADC multimode + * @note The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group). + * State of ADCs of the common group must be: disabled. + */ +typedef struct +{ + uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode. + This parameter can be a value of @ref ADCEx_Common_mode + Note: In dual mode, a change of channel configuration generates a restart that can produce a loss of synchronization. It is recommended to disable dual mode before any configuration change. + Note: In case of simultaneous mode used: Exactly the same sampling time should be configured for the 2 channels that will be sampled simultaneously by ACD1 and ADC2. + Note: In case of interleaved mode used: To avoid overlap between conversions, maximum sampling time allowed is 7 ADC clock cycles for fast interleaved mode and 14 ADC clock cycles for slow interleaved mode. + Note: Some multimode parameters are fixed on STM32F1 and can be configured on other STM32 devices with several ADC (multimode configuration structure can have additional parameters). + The equivalences are: + - Parameter 'DMAAccessMode': On STM32F1, this parameter is fixed to 1 DMA channel (one DMA channel for both ADC, DMA of ADC master). On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_DMAACCESSMODE_12_10_BITS'. + - Parameter 'TwoSamplingDelay': On STM32F1, this parameter is fixed to 7 or 14 ADC clock cycles depending on fast or slow interleaved mode selected. On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_TWOSAMPLINGDELAY_7CYCLES' (for fast interleaved mode). */ + + +}ADC_MultiModeTypeDef; +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants + * @{ + */ + +/** @defgroup ADCEx_injected_rank ADCEx rank into injected group + * @{ + */ +#define ADC_INJECTED_RANK_1 0x00000001U +#define ADC_INJECTED_RANK_2 0x00000002U +#define ADC_INJECTED_RANK_3 0x00000003U +#define ADC_INJECTED_RANK_4 0x00000004U +/** + * @} + */ + +/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group + * @{ + */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE 0x00000000U +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTTRIG) +/** + * @} + */ + +/** @defgroup ADC_External_trigger_source_Regular ADC External trigger selection for regular group + * @{ + */ +/*!< List of external triggers with generic trigger name, independently of */ +/* ADC target, sorted by trigger name: */ + +/*!< External triggers of regular group for ADC1&ADC2 only */ +#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1 +#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2 +#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2 +#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO +#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4 +#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11 + +#if defined (STM32F103xE) || defined (STM32F103xG) +/*!< External triggers of regular group for ADC3 only */ +#define ADC_EXTERNALTRIGCONV_T2_CC3 ADC3_EXTERNALTRIG_T2_CC3 +#define ADC_EXTERNALTRIGCONV_T3_CC1 ADC3_EXTERNALTRIG_T3_CC1 +#define ADC_EXTERNALTRIGCONV_T5_CC1 ADC3_EXTERNALTRIG_T5_CC1 +#define ADC_EXTERNALTRIGCONV_T5_CC3 ADC3_EXTERNALTRIG_T5_CC3 +#define ADC_EXTERNALTRIGCONV_T8_CC1 ADC3_EXTERNALTRIG_T8_CC1 +#endif /* STM32F103xE || defined STM32F103xG */ + +/*!< External triggers of regular group for all ADC instances */ +#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_3_EXTERNALTRIG_T1_CC3 + +#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) +/*!< Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */ +/* XL-density devices. */ +/* To use it on ADC or ADC2, a remap of trigger must be done from */ +/* EXTI line 11 to TIM8_TRGO with macro: */ +/* __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() */ +/* __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() */ + +/* Note for internal constant value management: If TIM8_TRGO is available, */ +/* its definition is set to value for ADC1&ADC2 by default and changed to */ +/* value for ADC3 by HAL ADC driver if ADC3 is selected. */ +#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO +#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#define ADC_SOFTWARE_START ADC1_2_3_SWSTART +/** + * @} + */ + +/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger selection for injected group + * @{ + */ +/*!< List of external triggers with generic trigger name, independently of */ +/* ADC target, sorted by trigger name: */ + +/*!< External triggers of injected group for ADC1&ADC2 only */ +#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO +#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1 +#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4 +#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO +#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 + +#if defined (STM32F103xE) || defined (STM32F103xG) +/*!< External triggers of injected group for ADC3 only */ +#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC3_EXTERNALTRIGINJEC_T4_CC3 +#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ADC3_EXTERNALTRIGINJEC_T8_CC2 +#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ADC3_EXTERNALTRIGINJEC_T5_TRGO +#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ADC3_EXTERNALTRIGINJEC_T5_CC4 +#endif /* STM32F103xE || defined STM32F103xG */ + +/*!< External triggers of injected group for all ADC instances */ +#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4 +#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO + +#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) +/*!< Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */ +/* XL-density devices. */ +/* To use it on ADC1 or ADC2, a remap of trigger must be done from */ +/* EXTI line 11 to TIM8_CC4 with macro: */ +/* __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() */ +/* __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() */ + +/* Note for internal constant value management: If TIM8_CC4 is available, */ +/* its definition is set to value for ADC1&ADC2 by default and changed to */ +/* value for ADC3 by HAL ADC driver if ADC3 is selected. */ +#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4 +#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#define ADC_INJECTED_SOFTWARE_START ADC1_2_3_JSWSTART +/** + * @} + */ + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode + * @{ + */ +#define ADC_MODE_INDEPENDENT 0x00000000U /*!< ADC dual mode disabled (ADC independent mode) */ +#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined regular simultaneous + injected simultaneous mode, on groups regular and injected */ +#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)( ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Combined regular simultaneous + alternate trigger mode, on groups regular and injected */ +#define ADC_DUALMODE_INJECSIMULT_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined injected simultaneous + fast interleaved mode, on groups regular and injected (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ +#define ADC_DUALMODE_INJECSIMULT_INTERLSLOW ((uint32_t)( ADC_CR1_DUALMOD_2 )) /*!< ADC dual mode enabled: Combined injected simultaneous + slow Interleaved mode, on groups regular and injected (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ +#define ADC_DUALMODE_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Injected simultaneous mode, on group injected */ +#define ADC_DUALMODE_REGSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Regular simultaneous mode, on group regular */ +#define ADC_DUALMODE_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Fast interleaved mode, on group regular (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ +#define ADC_DUALMODE_INTERLSLOW ((uint32_t)(ADC_CR1_DUALMOD_3 )) /*!< ADC dual mode enabled: Slow interleaved mode, on group regular (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ +#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CR1_DUALMOD_3 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Alternate trigger mode, on group injected */ +/** + * @} + */ +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants + * @{ + */ + +/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended Internal HAL driver trigger selection for regular group + * @{ + */ +/* List of external triggers of regular group for ADC1, ADC2, ADC3 (if ADC */ +/* instance is available on the selected device). */ +/* (used internally by HAL driver. To not use into HAL structure parameters) */ + +/* External triggers of regular group for ADC1&ADC2 (if ADCx available) */ +#define ADC1_2_EXTERNALTRIG_T1_CC1 0x00000000U +#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)( ADC_CR2_EXTSEL_0)) +#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)( ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) +#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 )) +#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) +#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 )) +#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) +/* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */ +/* XL-density devices. */ +#define ADC1_2_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_EXT_IT11 +#endif + +#if defined (STM32F103xE) || defined (STM32F103xG) +/* External triggers of regular group for ADC3 */ +#define ADC3_EXTERNALTRIG_T3_CC1 ADC1_2_EXTERNALTRIG_T1_CC1 +#define ADC3_EXTERNALTRIG_T2_CC3 ADC1_2_EXTERNALTRIG_T1_CC2 +#define ADC3_EXTERNALTRIG_T8_CC1 ADC1_2_EXTERNALTRIG_T2_CC2 +#define ADC3_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO +#define ADC3_EXTERNALTRIG_T5_CC1 ADC1_2_EXTERNALTRIG_T4_CC4 +#define ADC3_EXTERNALTRIG_T5_CC3 ADC1_2_EXTERNALTRIG_EXT_IT11 +#endif + +/* External triggers of regular group for ADC1&ADC2&ADC3 (if ADCx available) */ +#define ADC1_2_3_EXTERNALTRIG_T1_CC3 ((uint32_t)( ADC_CR2_EXTSEL_1 )) +#define ADC1_2_3_SWSTART ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) +/** + * @} + */ + +/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended Internal HAL driver trigger selection for injected group + * @{ + */ +/* List of external triggers of injected group for ADC1, ADC2, ADC3 (if ADC */ +/* instance is available on the selected device). */ +/* (used internally by HAL driver. To not use into HAL structure parameters) */ + +/* External triggers of injected group for ADC1&ADC2 (if ADCx available) */ +#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 )) +#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) +#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 )) +#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) +#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 )) +#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) +/* Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */ +/* XL-density devices. */ +#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 +#endif + +#if defined (STM32F103xE) || defined (STM32F103xG) +/* External triggers of injected group for ADC3 */ +#define ADC3_EXTERNALTRIGINJEC_T4_CC3 ADC1_2_EXTERNALTRIGINJEC_T2_TRGO +#define ADC3_EXTERNALTRIGINJEC_T8_CC2 ADC1_2_EXTERNALTRIGINJEC_T2_CC1 +#define ADC3_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4 +#define ADC3_EXTERNALTRIGINJEC_T5_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO +#define ADC3_EXTERNALTRIGINJEC_T5_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 +#endif /* STM32F103xE || defined STM32F103xG */ + +/* External triggers of injected group for ADC1&ADC2&ADC3 (if ADCx available) */ +#define ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO 0x00000000U +#define ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_0)) +#define ADC1_2_3_JSWSTART ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro ADCEx Private Macro + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + + +/** + * @brief For devices with 3 ADCs: Defines the external trigger source + * for regular group according to ADC into common group ADC1&ADC2 or + * ADC3 (some triggers with same source have different value to + * be programmed into ADC EXTSEL bits of CR2 register). + * For devices with 2 ADCs or less: this macro makes no change. + * @param __HANDLE__: ADC handle + * @param __EXT_TRIG_CONV__: External trigger selected for regular group. + * @retval External trigger to be programmed into EXTSEL bits of CR2 register + */ +#if defined (STM32F103xE) || defined (STM32F103xG) +#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \ + (( (((__HANDLE__)->Instance) == ADC3) \ + )? \ + ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \ + )? \ + (ADC3_EXTERNALTRIG_T8_TRGO) \ + : \ + (__EXT_TRIG_CONV__) \ + ) \ + : \ + (__EXT_TRIG_CONV__) \ + ) +#else +#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \ + (__EXT_TRIG_CONV__) +#endif /* STM32F103xE || STM32F103xG */ + +/** + * @brief For devices with 3 ADCs: Defines the external trigger source + * for injected group according to ADC into common group ADC1&ADC2 or + * ADC3 (some triggers with same source have different value to + * be programmed into ADC JEXTSEL bits of CR2 register). + * For devices with 2 ADCs or less: this macro makes no change. + * @param __HANDLE__: ADC handle + * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group. + * @retval External trigger to be programmed into JEXTSEL bits of CR2 register + */ +#if defined (STM32F103xE) || defined (STM32F103xG) +#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \ + (( (((__HANDLE__)->Instance) == ADC3) \ + )? \ + ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \ + )? \ + (ADC3_EXTERNALTRIGINJEC_T8_CC4) \ + : \ + (__EXT_TRIG_INJECTCONV__) \ + ) \ + : \ + (__EXT_TRIG_INJECTCONV__) \ + ) +#else +#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \ + (__EXT_TRIG_INJECTCONV__) +#endif /* STM32F103xE || STM32F103xG */ + + +/** + * @brief Verification if multimode is enabled for the selected ADC (multimode ADC master or ADC slave) (applicable for devices with several ADCs) + * @param __HANDLE__: ADC handle + * @retval Multimode state: RESET if multimode is disabled, other value if multimode is enabled + */ +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \ + (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \ + )? \ + (ADC1->CR1 & ADC_CR1_DUALMOD) \ + : \ + (RESET) \ + ) +#else +#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \ + (RESET) +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs) + * @param __HANDLE__: ADC handle + * @retval None + */ +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \ + (( (((__HANDLE__)->Instance) == ADC2) \ + )? \ + ((ADC1->CR1 & ADC_CR1_DUALMOD) == RESET) \ + : \ + (!RESET) \ + ) +#else +#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \ + (!RESET) +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @brief Check ADC multimode setting: In case of multimode, check whether ADC master of the selected ADC has feature auto-injection enabled (applicable for devices with several ADCs) + * @param __HANDLE__: ADC handle + * @retval None + */ +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \ + (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \ + )? \ + (ADC1->CR1 & ADC_CR1_JAUTO) \ + : \ + (RESET) \ + ) +#else +#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \ + (RESET) +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/** + * @brief Set handle of the other ADC sharing the common multimode settings + * @param __HANDLE__: ADC handle + * @param __HANDLE_OTHER_ADC__: other ADC handle + * @retval None + */ +#define ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \ + ((__HANDLE_OTHER_ADC__)->Instance = ADC2) + +/** + * @brief Set handle of the ADC slave associated to the ADC master + * On STM32F1 devices, ADC slave is always ADC2 (this can be different + * on other STM32 devices) + * @param __HANDLE_MASTER__: ADC master handle + * @param __HANDLE_SLAVE__: ADC slave handle + * @retval None + */ +#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \ + ((__HANDLE_SLAVE__)->Instance = ADC2) + +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \ + ((CHANNEL) == ADC_INJECTED_RANK_2) || \ + ((CHANNEL) == ADC_INJECTED_RANK_3) || \ + ((CHANNEL) == ADC_INJECTED_RANK_4)) + +#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING)) + +/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification + * @{ + */ +#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U)) +/** + * @} + */ + +#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START)) +#endif +#if defined (STM32F101xE) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ + ((REGTRIG) == ADC_SOFTWARE_START)) +#endif +#if defined (STM32F101xG) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START)) +#endif +#if defined (STM32F103xE) || defined (STM32F103xG) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ + ((REGTRIG) == ADC_SOFTWARE_START)) +#endif + +#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) +#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ + ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) +#endif +#if defined (STM32F101xE) +#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ + ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) +#endif +#if defined (STM32F101xG) +#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ + ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) +#endif +#if defined (STM32F103xE) || defined (STM32F103xG) +#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ + ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) +#endif + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \ + ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ + ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ + ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLFAST) || \ + ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLSLOW) || \ + ((MODE) == ADC_DUALMODE_INJECSIMULT) || \ + ((MODE) == ADC_DUALMODE_REGSIMULT) || \ + ((MODE) == ADC_DUALMODE_INTERLFAST) || \ + ((MODE) == ADC_DUALMODE_INTERLSLOW) || \ + ((MODE) == ADC_DUALMODE_ALTERTRIG) ) +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @} + */ + + + + + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/* ADC multimode */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc); +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); +/** + * @} + */ + + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode); +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_ADC_EX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h similarity index 98% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h index aa4a40d..e2787aa 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_can.h + * @file stm32f1xx_hal_can.h * @author MCD Application Team * @brief Header file of CAN HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_CAN_H -#define STM32F4xx_HAL_CAN_H +#ifndef STM32F1xx_HAL_CAN_H +#define STM32F1xx_HAL_CAN_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -793,7 +794,9 @@ HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan); ((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ)) #define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U)) #define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU) +#if defined(CAN2) #define IS_CAN_FILTER_BANK_DUAL(BANK) ((BANK) <= 27U) +#endif #define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U) #define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \ ((MODE) == CAN_FILTERMODE_IDLIST)) @@ -841,4 +844,7 @@ HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan); } #endif -#endif /* STM32F4xx_HAL_CAN_H */ +#endif /* STM32F1xx_HAL_CAN_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h new file mode 100644 index 0000000..0859019 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h @@ -0,0 +1,552 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_cec.h + * @author MCD Application Team + * @brief Header file of CEC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_CEC_H +#define __STM32F1xx_HAL_CEC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +#if defined (CEC) + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CEC_Exported_Types CEC Exported Types + * @{ + */ +/** + * @brief CEC Init Structure definition + */ +typedef struct +{ + uint32_t TimingErrorFree; /*!< Configures the CEC Bit Timing Error Mode. + This parameter can be a value of @ref CEC_BitTimingErrorMode */ + uint32_t PeriodErrorFree; /*!< Configures the CEC Bit Period Error Mode. + This parameter can be a value of @ref CEC_BitPeriodErrorMode */ + uint16_t OwnAddress; /*!< Own addresses configuration + This parameter can be a value of @ref CEC_OWN_ADDRESS */ + uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */ +}CEC_InitTypeDef; + +/** + * @brief HAL CEC State structures definition + * @note HAL CEC State value is a combination of 2 different substates: gState and RxState. + * - gState contains CEC state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7 (not used) + * x : Should be set to 0 + * b6 Error information + * 0 : No Error + * 1 : Error + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP initialized. HAL CEC Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (IP busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef enum +{ + HAL_CEC_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ + HAL_CEC_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ + HAL_CEC_STATE_BUSY = 0x24U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_CEC_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing + Value is allowed for RxState only */ + HAL_CEC_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing + Value is allowed for gState only */ + HAL_CEC_STATE_BUSY_RX_TX = 0x23U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_CEC_STATE_ERROR = 0x60U /*!< Error Value is allowed for gState only */ +}HAL_CEC_StateTypeDef; + +/** + * @brief CEC handle Structure definition + */ +typedef struct __CEC_HandleTypeDef +{ + CEC_TypeDef *Instance; /*!< CEC registers base address */ + + CEC_InitTypeDef Init; /*!< CEC communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ + + uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ + + uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_CEC_StateTypeDef */ + + HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. + This parameter can be a value of @ref HAL_CEC_StateTypeDef */ + + uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register + in case error is reported */ + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Tx Transfer completed callback */ + void (* RxCpltCallback) ( struct __CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ + void (* ErrorCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC error callback */ + + void (* MspInitCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Msp Init callback */ + void (* MspDeInitCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Msp DeInit callback */ + +#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ +}CEC_HandleTypeDef; + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL CEC Callback ID enumeration definition + */ +typedef enum +{ + HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ + HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ + HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ + HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ + HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ +}HAL_CEC_CallbackIDTypeDef; + +/** + * @brief HAL CEC Callback pointer definition + */ +typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef * hcec); /*!< pointer to an CEC callback function */ +typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */ +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CEC_Exported_Constants CEC Exported Constants + * @{ + */ + +/** @defgroup CEC_Error_Code CEC Error Code + * @{ + */ +#define HAL_CEC_ERROR_NONE 0x00000000U /*!< no error */ +#define HAL_CEC_ERROR_BTE CEC_ESR_BTE /*!< Bit Timing Error */ +#define HAL_CEC_ERROR_BPE CEC_ESR_BPE /*!< Bit Period Error */ +#define HAL_CEC_ERROR_RBTFE CEC_ESR_RBTFE /*!< Rx Block Transfer Finished Error */ +#define HAL_CEC_ERROR_SBE CEC_ESR_SBE /*!< Start Bit Error */ +#define HAL_CEC_ERROR_ACKE CEC_ESR_ACKE /*!< Block Acknowledge Error */ +#define HAL_CEC_ERROR_LINE CEC_ESR_LINE /*!< Line Error */ +#define HAL_CEC_ERROR_TBTFE CEC_ESR_TBTFE /*!< Tx Block Transfer Finished Error */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback Error */ +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup CEC_BitTimingErrorMode Bit Timing Error Mode + * @{ + */ +#define CEC_BIT_TIMING_ERROR_MODE_STANDARD 0x00000000U /*!< Bit timing error Standard Mode */ +#define CEC_BIT_TIMING_ERROR_MODE_ERRORFREE CEC_CFGR_BTEM /*!< Bit timing error Free Mode */ +/** + * @} + */ + +/** @defgroup CEC_BitPeriodErrorMode Bit Period Error Mode + * @{ + */ +#define CEC_BIT_PERIOD_ERROR_MODE_STANDARD 0x00000000U /*!< Bit period error Standard Mode */ +#define CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */ +/** + * @} + */ + +/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header + * @{ + */ +#define CEC_INITIATOR_LSB_POS 4U +/** + * @} + */ + +/** @defgroup CEC_OWN_ADDRESS CEC Own Address + * @{ + */ +#define CEC_OWN_ADDRESS_NONE CEC_OWN_ADDRESS_0 /* Reset value */ +#define CEC_OWN_ADDRESS_0 ((uint16_t)0x0000U) /* Logical Address 0 */ +#define CEC_OWN_ADDRESS_1 ((uint16_t)0x0001U) /* Logical Address 1 */ +#define CEC_OWN_ADDRESS_2 ((uint16_t)0x0002U) /* Logical Address 2 */ +#define CEC_OWN_ADDRESS_3 ((uint16_t)0x0003U) /* Logical Address 3 */ +#define CEC_OWN_ADDRESS_4 ((uint16_t)0x0004U) /* Logical Address 4 */ +#define CEC_OWN_ADDRESS_5 ((uint16_t)0x0005U) /* Logical Address 5 */ +#define CEC_OWN_ADDRESS_6 ((uint16_t)0x0006U) /* Logical Address 6 */ +#define CEC_OWN_ADDRESS_7 ((uint16_t)0x0007U) /* Logical Address 7 */ +#define CEC_OWN_ADDRESS_8 ((uint16_t)0x0008U) /* Logical Address 8 */ +#define CEC_OWN_ADDRESS_9 ((uint16_t)0x0009U) /* Logical Address 9 */ +#define CEC_OWN_ADDRESS_10 ((uint16_t)0x000AU) /* Logical Address 10 */ +#define CEC_OWN_ADDRESS_11 ((uint16_t)0x000BU) /* Logical Address 11 */ +#define CEC_OWN_ADDRESS_12 ((uint16_t)0x000CU) /* Logical Address 12 */ +#define CEC_OWN_ADDRESS_13 ((uint16_t)0x000DU) /* Logical Address 13 */ +#define CEC_OWN_ADDRESS_14 ((uint16_t)0x000EU) /* Logical Address 14 */ +#define CEC_OWN_ADDRESS_15 ((uint16_t)0x000FU) /* Logical Address 15 */ +/** + * @} + */ + +/** @defgroup CEC_Interrupts_Definitions Interrupts definition + * @{ + */ +#define CEC_IT_IE CEC_CFGR_IE +/** + * @} + */ + +/** @defgroup CEC_Flags_Definitions Flags definition + * @{ + */ +#define CEC_FLAG_TSOM CEC_CSR_TSOM +#define CEC_FLAG_TEOM CEC_CSR_TEOM +#define CEC_FLAG_TERR CEC_CSR_TERR +#define CEC_FLAG_TBTRF CEC_CSR_TBTRF +#define CEC_FLAG_RSOM CEC_CSR_RSOM +#define CEC_FLAG_REOM CEC_CSR_REOM +#define CEC_FLAG_RERR CEC_CSR_RERR +#define CEC_FLAG_RBTF CEC_CSR_RBTF +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CEC_Exported_Macros CEC Exported Macros + * @{ + */ + +/** @brief Reset CEC handle gstate & RxState + * @param __HANDLE__: CEC handle. + * @retval None + */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + +/** @brief Checks whether or not the specified CEC interrupt flag is set. + * @param __HANDLE__: specifies the CEC Handle. + * @param __FLAG__: specifies the flag to check. + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF:Tx Block Transfer Finished + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Block Transfer Finished + * @retval ITStatus + */ +#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) READ_BIT((__HANDLE__)->Instance->CSR,(__FLAG__)) + +/** @brief Clears the CEC's pending flags. + * @param __HANDLE__: specifies the CEC Handle. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg CEC_CSR_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Block Transfer Finished + * @arg CEC_CSR_RERR: Rx Error + * @arg CEC_CSR_RBTF: Rx Block Transfer Finished + * @retval none + */ +#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + do { \ + uint32_t tmp = 0x0U; \ + tmp = (__HANDLE__)->Instance->CSR & 0x00000002U; \ + (__HANDLE__)->Instance->CSR &= (uint32_t)(((~(uint32_t)(__FLAG__)) & 0xFFFFFFFCU) | tmp);\ + } while(0U) + +/** @brief Enables the specified CEC interrupt. + * @param __HANDLE__: specifies the CEC Handle. + * @param __INTERRUPT__: specifies the CEC interrupt to enable. + * This parameter can be: + * @arg CEC_IT_IE : Interrupt Enable. + * @retval none + */ +#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__)) + +/** @brief Disables the specified CEC interrupt. + * @param __HANDLE__: specifies the CEC Handle. + * @param __INTERRUPT__: specifies the CEC interrupt to disable. + * This parameter can be: + * @arg CEC_IT_IE : Interrupt Enable + * @retval none + */ +#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__)) + +/** @brief Checks whether or not the specified CEC interrupt is enabled. + * @param __HANDLE__: specifies the CEC Handle. + * @param __INTERRUPT__: specifies the CEC interrupt to check. + * This parameter can be: + * @arg CEC_IT_IE : Interrupt Enable + * @retval FlagStatus + */ +#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) READ_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__)) + +/** @brief Enables the CEC device + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE) + +/** @brief Disables the CEC device + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE) + +/** @brief Set Transmission Start flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM) + +/** @brief Set Transmission End flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM) + +/** @brief Get Transmission Start flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM) + +/** @brief Get Transmission End flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM) + +/** @brief Clear OAR register + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->OAR, CEC_OAR_OA) + +/** @brief Set OAR register + * @param __HANDLE__: specifies the CEC Handle. + * @param __ADDRESS__: Own Address value. + * @retval none + */ +#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) MODIFY_REG((__HANDLE__)->Instance->OAR, CEC_OAR_OA, (__ADDRESS__)); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CEC_Exported_Functions CEC Exported Functions + * @{ + */ + +/** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); +void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); +void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, pCEC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions + * @brief CEC Transmit/Receive functions + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size); +uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec); +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer); +void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); +void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); +void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); +void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions + * @brief CEC control functions + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec); +uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup CEC_Private_Types CEC Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Variables CEC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Constants CEC Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CEC_Private_Macros CEC Private Macros + * @{ + */ +#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BIT_TIMING_ERROR_MODE_STANDARD) || \ + ((MODE) == CEC_BIT_TIMING_ERROR_MODE_ERRORFREE)) + +#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BIT_PERIOD_ERROR_MODE_STANDARD) || \ + ((MODE) == CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE)) + +/** @brief Check CEC message size. + * The message size is the payload size: without counting the header, + * it varies from 0 byte (ping operation, one header only, no payload) to + * 15 bytes (1 opcode and up to 14 operands following the header). + * @param __SIZE__: CEC message size. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) +/** @brief Check CEC device Own Address Register (OAR) setting. + * @param __ADDRESS__: CEC own address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU) + +/** @brief Check CEC initiator or destination logical address setting. + * Initiator and destination addresses are coded over 4 bits. + * @param __ADDRESS__: CEC initiator or logical address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU) + + + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Functions CEC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* CEC */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_CEC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h similarity index 63% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h index c0c4484..097720b 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h @@ -1,29 +1,30 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h + * @file stm32f1xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed - * to stm32f4xx_hal_conf.h. + * to stm32f1xx_hal_conf.h. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H +#ifndef __STM32F1xx_HAL_CONF_H +#define __STM32F1xx_HAL_CONF_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Exported types ------------------------------------------------------------*/ @@ -31,158 +32,120 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED #define HAL_ADC_MODULE_ENABLED #define HAL_CAN_MODULE_ENABLED /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -#define HAL_CRC_MODULE_ENABLED #define HAL_CEC_MODULE_ENABLED -#define HAL_CRYP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED #define HAL_DAC_MODULE_ENABLED -#define HAL_DCMI_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED -#define HAL_DMA2D_MODULE_ENABLED #define HAL_ETH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED #define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED #define HAL_NAND_MODULE_ENABLED #define HAL_NOR_MODULE_ENABLED #define HAL_PCCARD_MODULE_ENABLED -#define HAL_SRAM_MODULE_ENABLED -#define HAL_SDRAM_MODULE_ENABLED -#define HAL_HASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED -#define HAL_SMBUS_MODULE_ENABLED -#define HAL_I2S_MODULE_ENABLED -#define HAL_IWDG_MODULE_ENABLED -#define HAL_LTDC_MODULE_ENABLED -#define HAL_DSI_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED -#define HAL_QSPI_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED -#define HAL_RNG_MODULE_ENABLED #define HAL_RTC_MODULE_ENABLED -#define HAL_SAI_MODULE_ENABLED #define HAL_SD_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED #define HAL_SPI_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED -#define HAL_IRDA_MODULE_ENABLED -#define HAL_SMARTCARD_MODULE_ENABLED #define HAL_WWDG_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED -#define HAL_HCD_MODULE_ENABLED -#define HAL_FMPI2C_MODULE_ENABLED -#define HAL_FMPSMBUS_MODULE_ENABLED -#define HAL_SPDIFRX_MODULE_ENABLED -#define HAL_DFSDM_MODULE_ENABLED -#define HAL_LPTIM_MODULE_ENABLED #define HAL_MMC_MODULE_ENABLED -/* ########################## HSE/HSI Values adaptation ##################### */ +/* ########################## Oscillator Values adaptation ####################*/ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ +#if !defined (HSE_VALUE) +#if defined(USE_STM3210C_EVAL) +#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ +#else +#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) - #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */ +#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ #endif /* HSI_VALUE */ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ /** * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency */ #if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ #endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ #define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */ #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ #define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ #define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ #define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ @@ -191,7 +154,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -208,17 +171,17 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE 1528U /* ETH Max buffer size for receive */ -#define ETH_TX_BUF_SIZE 1528U /* ETH Max buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ #define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -230,7 +193,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -245,13 +208,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -273,203 +236,139 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" +#include "stm32f1xx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ #ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" +#include "stm32f1xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ #ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" +#include "stm32f1xx_hal_exti.h" #endif /* HAL_EXTI_MODULE_ENABLED */ #ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" +#include "stm32f1xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ +#ifdef HAL_ETH_MODULE_ENABLED +#include "stm32f1xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ #ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" +#include "stm32f1xx_hal_can.h" #endif /* HAL_CAN_MODULE_ENABLED */ #ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" + #include "Legacy/stm32f1xx_hal_can_legacy.h" #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32f1xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32f1xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32f1xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + #ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" +#include "stm32f1xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - #ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" +#include "stm32f1xx_hal_dac.h" #endif /* HAL_DAC_MODULE_ENABLED */ -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - #ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" +#include "stm32f1xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" +#include "stm32f1xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ #ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" +#include "stm32f1xx_hal_nor.h" #endif /* HAL_NOR_MODULE_ENABLED */ -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - #ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" +#include "stm32f1xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - #ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" +#include "stm32f1xx_hal_i2s.h" #endif /* HAL_I2S_MODULE_ENABLED */ #ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" +#include "stm32f1xx_hal_iwdg.h" #endif /* HAL_IWDG_MODULE_ENABLED */ -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - #ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" +#include "stm32f1xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - #ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" +#include "stm32f1xx_hal_rtc.h" #endif /* HAL_RTC_MODULE_ENABLED */ -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ +#ifdef HAL_PCCARD_MODULE_ENABLED +#include "stm32f1xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" +#include "stm32f1xx_hal_sd.h" #endif /* HAL_SD_MODULE_ENABLED */ +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32f1xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + #ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" +#include "stm32f1xx_hal_spi.h" #endif /* HAL_SPI_MODULE_ENABLED */ #ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" +#include "stm32f1xx_hal_tim.h" #endif /* HAL_TIM_MODULE_ENABLED */ #ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" +#include "stm32f1xx_hal_uart.h" #endif /* HAL_UART_MODULE_ENABLED */ #ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" +#include "stm32f1xx_hal_usart.h" #endif /* HAL_USART_MODULE_ENABLED */ #ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" +#include "stm32f1xx_hal_irda.h" #endif /* HAL_IRDA_MODULE_ENABLED */ #ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" +#include "stm32f1xx_hal_smartcard.h" #endif /* HAL_SMARTCARD_MODULE_ENABLED */ #ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" +#include "stm32f1xx_hal_wwdg.h" #endif /* HAL_WWDG_MODULE_ENABLED */ #ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" +#include "stm32f1xx_hal_pcd.h" #endif /* HAL_PCD_MODULE_ENABLED */ #ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" +#include "stm32f1xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_FMPSMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_fmpsmbus.h" -#endif /* HAL_FMPSMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ #ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" +#include "stm32f1xx_hal_mmc.h" #endif /* HAL_MMC_MODULE_ENABLED */ /* Exported macro ------------------------------------------------------------*/ @@ -478,15 +377,15 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) /* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); +void assert_failed(uint8_t* file, uint32_t line); #else - #define assert_param(expr) ((void)0U) +#define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ @@ -494,7 +393,7 @@ } #endif -#endif /* __STM32F4xx_HAL_CONF_H */ - +#endif /* __STM32F1xx_HAL_CONF_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h similarity index 96% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h index fdc96b5..a365b02 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h @@ -1,32 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_cortex.h + * @file stm32f1xx_hal_cortex.h * @author MCD Application Team * @brief Header file of CORTEX HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CORTEX_H -#define __STM32F4xx_HAL_CORTEX_H +#ifndef __STM32F1xx_HAL_CORTEX_H +#define __STM32F1xx_HAL_CORTEX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -402,6 +404,7 @@ void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); } #endif -#endif /* __STM32F4xx_HAL_CORTEX_H */ +#endif /* __STM32F1xx_HAL_CORTEX_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_crc.h similarity index 87% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_crc.h index 41edbe3..92ccd0f 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_crc.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_crc.h + * @file stm32f1xx_hal_crc.h * @author MCD Application Team * @brief Header file of CRC HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_CRC_H -#define STM32F4xx_HAL_CRC_H +#ifndef STM32F1xx_HAL_CRC_H +#define STM32F1xx_HAL_CRC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -178,4 +179,6 @@ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); } #endif -#endif /* STM32F4xx_HAL_CRC_H */ +#endif /* STM32F1xx_HAL_CRC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac.h similarity index 84% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac.h index a79ca73..d09c6ae 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac.h @@ -1,35 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_dac.h + * @file stm32f1xx_hal_dac.h * @author MCD Application Team * @brief Header file of DAC HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_DAC_H -#define STM32F4xx_HAL_DAC_H +#ifndef STM32F1xx_HAL_DAC_H +#define STM32F1xx_HAL_DAC_H #ifdef __cplusplus extern "C" { #endif -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" #if defined(DAC) @@ -82,12 +83,12 @@ typedef struct void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac); void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac); void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac); -#if defined(DAC_CHANNEL2_SUPPORT) + void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac); void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac); void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef *hdac); void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef *hdac); -#endif /* DAC_CHANNEL2_SUPPORT */ + void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac); void (* MspDeInitCallback) (struct __DAC_HandleTypeDef *hdac); @@ -118,12 +119,12 @@ typedef enum HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */ HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */ HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */ -#if defined(DAC_CHANNEL2_SUPPORT) + HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */ HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */ HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */ HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */ -#endif /* DAC_CHANNEL2_SUPPORT */ + HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */ HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */ HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */ @@ -150,32 +151,13 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); */ #define HAL_DAC_ERROR_NONE 0x00U /*!< No error */ #define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */ -#if defined(DAC_CHANNEL2_SUPPORT) #define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */ -#endif /* DAC_CHANNEL2_SUPPORT */ #define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */ #define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */ #if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) #define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */ #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup DAC_trigger_selection DAC trigger selection - * @{ - */ -#define DAC_TRIGGER_NONE 0x00000000UL /*!< Conversion is automatic once the DAC1_DHRxxxx register has been loaded, and not by external trigger */ -#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T6_TRGO ( DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ -#define DAC_TRIGGER_T7_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T8_TRGO ( DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_SOFTWARE (DAC_CR_TSEL1 | DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ - /** * @} */ @@ -194,9 +176,9 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); * @{ */ #define DAC_CHANNEL_1 0x00000000U -#if defined(DAC_CHANNEL2_SUPPORT) + #define DAC_CHANNEL_2 0x00000010U -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} */ @@ -216,9 +198,9 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); * @{ */ #define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) -#if defined(DAC_CHANNEL2_SUPPORT) + #define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} @@ -228,9 +210,9 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); * @{ */ #define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1) -#if defined(DAC_CHANNEL2_SUPPORT) + #define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2) -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} @@ -282,13 +264,13 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); */ #define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__)) -#if defined(DAC_CHANNEL2_SUPPORT) + /** @brief Set DHR12R2 alignment. * @param __ALIGNMENT__ specifies the DAC alignment * @retval None */ #define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__)) -#endif /* DAC_CHANNEL2_SUPPORT */ + /** @brief Set DHR12RD alignment. * @param __ALIGNMENT__ specifies the DAC alignment @@ -359,12 +341,8 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); #define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) -#if defined(DAC_CHANNEL2_SUPPORT) #define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ ((CHANNEL) == DAC_CHANNEL_2)) -#else -#define IS_DAC_CHANNEL(CHANNEL) ((CHANNEL) == DAC_CHANNEL_1) -#endif /* DAC_CHANNEL2_SUPPORT */ #define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ ((ALIGN) == DAC_ALIGN_12B_L) || \ @@ -377,7 +355,7 @@ typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); */ /* Include DAC HAL Extended module */ -#include "stm32f4xx_hal_dac_ex.h" +#include "stm32f1xx_hal_dac_ex.h" /* Exported functions --------------------------------------------------------*/ @@ -476,5 +454,6 @@ void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); #endif -#endif /* STM32F4xx_HAL_DAC_H */ +#endif /* STM32F1xx_HAL_DAC_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac_ex.h similarity index 60% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac_ex.h index db10990..6ce1e93 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac_ex.h @@ -1,35 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_dac_ex.h + * @file stm32f1xx_hal_dac_ex.h * @author MCD Application Team * @brief Header file of DAC HAL Extended module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_DAC_EX_H -#define STM32F4xx_HAL_DAC_EX_H +#ifndef STM32F1xx_HAL_DAC_EX_H +#define STM32F1xx_HAL_DAC_EX_H #ifdef __cplusplus extern "C" { #endif -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" #if defined(DAC) @@ -77,6 +78,57 @@ extern "C" { #define DAC_TRIANGLEAMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 2047 */ #define DAC_TRIANGLEAMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ +/** + * @} + */ + +/** @defgroup DACEx_trigger_selection DAC trigger selection + * @{ + */ +#define DAC_TRIGGER_NONE 0x00000000U /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_TRIGGER_T6_TRGO ((uint32_t) DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T7_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */ + +#if defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG) +/* For STM32F10x high-density and XL-density devices: TIM8 */ +#define DAC_TRIGGER_T8_TRGO ((uint32_t) DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ +#endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ + +#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F105xC) || defined (STM32F107xC) +/* For STM32F10x connectivity line devices and STM32F100x devices: TIM3 */ +#define DAC_TRIGGER_T3_TRGO ((uint32_t) DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ +#endif /* STM32F100xB || STM32F100xE || STM32F105xC || STM32F107xC */ + +/* Availability of trigger from TIM5 and TIM15: */ +/* - For STM32F10x value line devices STM32F100xB: */ +/* trigger from TIM15 is available, TIM5 not available. */ +/* - For STM32F10x value line devices STM32F100xE: */ +/* trigger from TIM15 and TIM5 are both available, */ +/* selection depends on remap (with TIM5 as default configuration). */ +/* - Other STM32F1 devices: */ +/* trigger from TIM5 is available, TIM15 not available. */ +#if defined (STM32F100xB) +#define DAC_TRIGGER_T15_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */ +#else + +#define DAC_TRIGGER_T5_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ + +#if defined (STM32F100xE) +/*!< DAC trigger availability depending on STM32F1 devices: + For STM32F100x high-density value line devices, the TIM15 TRGO event can be selected + as replacement of TIM5 TRGO if the MISC_REMAP bit in the AFIO_MAPR2 register is set. + Refer to macro "__HAL_AFIO_REMAP_MISC_ENABLE()/__HAL_AFIO_REMAP_MISC_DISABLE()". + Otherwise, TIM5 TRGO is used and TIM15 TRGO is not used (default case). + For more details please refer to the AFIO section. */ +#define DAC_TRIGGER_T15_TRGO DAC_TRIGGER_T5_TRGO +#endif /* STM32F100xE */ + +#endif /* STM32F100xB */ /** * @} */ @@ -93,15 +145,39 @@ extern "C" { /** @defgroup DACEx_Private_Macros DACEx Private Macros * @{ */ +#if defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG) #define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ - ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) +#endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ +#if defined (STM32F100xE) || defined (STM32F105xC) || defined (STM32F107xC) +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) +#endif /* STM32F100xE || STM32F105xC || STM32F107xC */ +#if defined (STM32F100xB) +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) +#endif /* STM32F100xB */ #define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ @@ -146,15 +222,11 @@ extern "C" { HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); -#if defined(DAC_CHANNEL2_SUPPORT) -#endif HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac); HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac); HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac); -#if defined(DAC_CHANNEL2_SUPPORT) -#endif void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac); void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac); void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac); @@ -176,13 +248,13 @@ void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac); /** @addtogroup DACEx_Private_Functions * @{ */ -#if defined(DAC_CHANNEL2_SUPPORT) + /* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */ /* are called by HAL_DAC_Start_DMA */ void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} */ @@ -201,5 +273,6 @@ void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); } #endif -#endif /* STM32F4xx_HAL_DAC_EX_H */ +#endif /* STM32F1xx_HAL_DAC_EX_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h similarity index 71% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h index d31b6c5..1950978 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h @@ -1,42 +1,43 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_def.h + * @file stm32f1xx_hal_def.h * @author MCD Application Team - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DEF -#define __STM32F4xx_HAL_DEF +#ifndef __STM32F1xx_HAL_DEF +#define __STM32F1xx_HAL_DEF #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" #include "Legacy/stm32_hal_legacy.h" #include -#include "stm32f4xx_matlab_conf.h" +#include "mcu_wrapper_conf.h" /* Exported types ------------------------------------------------------------*/ -/** - * @brief HAL Status structures definition - */ -typedef enum +/** + * @brief HAL Status structures definition + */ +typedef enum { HAL_OK = 0x00U, HAL_ERROR = 0x01U, @@ -44,22 +45,19 @@ typedef enum HAL_TIMEOUT = 0x03U } HAL_StatusTypeDef; -/** - * @brief HAL Lock structures definition +/** + * @brief HAL Lock structures definition */ -typedef enum +typedef enum { HAL_UNLOCKED = 0x00U, - HAL_LOCKED = 0x01U + HAL_LOCKED = 0x01U } HAL_LockTypeDef; /* Exported macro ------------------------------------------------------------*/ - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ - #define HAL_MAX_DELAY 0xFFFFFFFFU -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != 0U) #define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) #define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ @@ -68,13 +66,15 @@ typedef enum (__DMA_HANDLE__).Parent = (__HANDLE__); \ } while(0U) +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + /** @brief Reset the Handle's State field. * @param __HANDLE__ specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: + * @note This macro can be used for the following purpose: * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function + * Otherwise, "State" field may have any random value and the first time the function * HAL_PPP_Init() is called, the low level hardware initialization will be missed * (i.e. HAL_PPP_MspInit() will not be executed). * - When there is a need to reconfigure the low level hardware: instead of calling @@ -86,10 +86,10 @@ typedef enum #define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) #if (USE_RTOS == 1U) - /* Reserved for future use */ - #error "USE_RTOS should be 0 in the current HAL release" +/* Reserved for future use */ +#error "USE_RTOS should be 0 in the current HAL release" #else - #define __HAL_LOCK(__HANDLE__) \ +#define __HAL_LOCK(__HANDLE__) \ do{ \ if((__HANDLE__)->Lock == HAL_LOCKED) \ { \ @@ -101,93 +101,93 @@ typedef enum } \ }while (0U) - #define __HAL_UNLOCK(__HANDLE__) \ +#define __HAL_UNLOCK(__HANDLE__) \ do{ \ (__HANDLE__)->Lock = HAL_UNLOCKED; \ }while (0U) #endif /* USE_RTOS */ #if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif - #ifndef __packed - #define __packed __attribute__((packed)) - #endif +#ifndef __weak +#define __weak __attribute__((weak)) +#endif +#ifndef __packed +#define __packed __attribute__((packed)) +#endif #elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ #endif /* __GNUC__ */ /* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ #if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4))) +#endif #elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __ALIGN_END +#ifndef __ALIGN_END #define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ #else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler V5*/ +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#if defined (__CC_ARM) /* ARM Compiler V5*/ #define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ +#elif defined (__ICCARM__) /* IAR Compiler */ +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ #endif /* __GNUC__ */ -/** +/** * @brief __RAM_FUNC definition - */ + */ #if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) /* ARM Compiler V4/V5 and V6 -------------------------- - RAM functions are defined using the toolchain options. + RAM functions are defined using the toolchain options. Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' + Using the 'Options for File' dialog you can simply change the 'Code / Const' area of a module to a memory space in physical RAM. Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. + dialog. */ #define __RAM_FUNC #elif defined ( __ICCARM__ ) /* ICCARM Compiler --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". + RAM functions are defined using a specific toolchain keyword "__ramfunc". */ #define __RAM_FUNC __ramfunc #elif defined ( __GNUC__ ) /* GNU Compiler ------------ - RAM functions are defined using a specific toolchain attribute + RAM functions are defined using a specific toolchain attribute "__attribute__((section(".RamFunc")))". */ #define __RAM_FUNC __attribute__((section(".RamFunc"))) #endif -/** +/** * @brief __NOINLINE definition - */ + */ #if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) /* ARM V4/V5 and V6 & GNU Compiler ------------------------------- @@ -206,6 +206,6 @@ typedef enum } #endif -#endif /* ___STM32F4xx_HAL_DEF */ - +#endif /* ___STM32F1xx_HAL_DEF */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h new file mode 100644 index 0000000..9a407f4 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h @@ -0,0 +1,457 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_DMA_H +#define __STM32F1xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< no ongoing transfer */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 0x00000001U +#define DMA_FLAG_TC1 0x00000002U +#define DMA_FLAG_HT1 0x00000004U +#define DMA_FLAG_TE1 0x00000008U +#define DMA_FLAG_GL2 0x00000010U +#define DMA_FLAG_TC2 0x00000020U +#define DMA_FLAG_HT2 0x00000040U +#define DMA_FLAG_TE2 0x00000080U +#define DMA_FLAG_GL3 0x00000100U +#define DMA_FLAG_TC3 0x00000200U +#define DMA_FLAG_HT3 0x00000400U +#define DMA_FLAG_TE3 0x00000800U +#define DMA_FLAG_GL4 0x00001000U +#define DMA_FLAG_TC4 0x00002000U +#define DMA_FLAG_HT4 0x00004000U +#define DMA_FLAG_TE4 0x00008000U +#define DMA_FLAG_GL5 0x00010000U +#define DMA_FLAG_TC5 0x00020000U +#define DMA_FLAG_HT5 0x00040000U +#define DMA_FLAG_TE5 0x00080000U +#define DMA_FLAG_GL6 0x00100000U +#define DMA_FLAG_TC6 0x00200000U +#define DMA_FLAG_HT6 0x00400000U +#define DMA_FLAG_TE6 0x00800000U +#define DMA_FLAG_GL7 0x01000000U +#define DMA_FLAG_TC7 0x02000000U +#define DMA_FLAG_HT7 0x04000000U +#define DMA_FLAG_TE7 0x08000000U +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) + + +/* Interrupt & Flag management */ + +/** + * @brief Enables the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__))) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__))) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__: DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32f1xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h new file mode 100644 index 0000000..2de1a2d --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h @@ -0,0 +1,277 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_DMA_EX_H +#define __STM32F1xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros + * @{ + */ +/* Interrupt & Flag management */ +#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \ + defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) +/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices + * @{ + */ + +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\ + DMA_FLAG_GL5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\ + (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\ + (DMA1->IFCR = (__FLAG__))) + +/** + * @} + */ + +#else +/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices + * @{ + */ + +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + DMA_FLAG_GL7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */ + /* STM32F103xG || STM32F105xC || STM32F107xC */ + +#endif /* __STM32F1xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_eth_legacy.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_eth.h similarity index 89% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_eth_legacy.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_eth.h index ab84a46..2e46085 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32f4xx_hal_eth_legacy.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_eth.h @@ -1,35 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_eth_legacy.h + * @file stm32f1xx_hal_eth.h * @author MCD Application Team * @brief Header file of ETH HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_ETH_LEGACY_H -#define __STM32F4xx_HAL_ETH_LEGACY_H +#ifndef __STM32F1xx_HAL_ETH_H +#define __STM32F1xx_HAL_ETH_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +#if defined (ETH) + +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -337,9 +338,9 @@ /* ETHERNET Missed frames counter Shift */ #define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17U - /** - * @} - */ +/** + * @} + */ /* Exported types ------------------------------------------------------------*/ /** @defgroup ETH_Exported_Types ETH Exported Types @@ -361,7 +362,7 @@ typedef enum HAL_ETH_STATE_BUSY_RD = 0x82U, /*!< Read process is ongoing */ HAL_ETH_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ HAL_ETH_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ -}HAL_ETH_StateTypeDef; +} HAL_ETH_StateTypeDef; /** * @brief ETH Init Structure definition @@ -397,9 +398,9 @@ typedef struct } ETH_InitTypeDef; - /** - * @brief ETH MAC Configuration Structure definition - */ +/** + * @brief ETH MAC Configuration Structure definition + */ typedef struct { @@ -509,7 +510,7 @@ typedef struct typedef struct { - uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames. + uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames. This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode. @@ -550,9 +551,6 @@ typedef struct uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction. This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */ - uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format. - This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */ - uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode) This parameter must be a number between Min_Data = 0 and Max_Data = 32 */ @@ -575,15 +573,6 @@ typedef struct uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */ - /*!< Enhanced ETHERNET DMA PTP Descriptors */ - uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */ - - uint32_t Reserved1; /*!< Reserved */ - - uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */ - - uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */ - } ETH_DMADescTypeDef; /** @@ -631,11 +620,11 @@ typedef struct #if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - void (* TxCpltCallback) ( struct __ETH_HandleTypeDef * heth); /*!< ETH Tx Complete Callback */ - void (* RxCpltCallback) ( struct __ETH_HandleTypeDef * heth); /*!< ETH Rx Complete Callback */ - void (* DMAErrorCallback) ( struct __ETH_HandleTypeDef * heth); /*!< DMA Error Callback */ - void (* MspInitCallback) ( struct __ETH_HandleTypeDef * heth); /*!< ETH Msp Init callback */ - void (* MspDeInitCallback) ( struct __ETH_HandleTypeDef * heth); /*!< ETH Msp DeInit callback */ + void (* TxCpltCallback)(struct __ETH_HandleTypeDef *heth); /*!< ETH Tx Complete Callback */ + void (* RxCpltCallback)(struct __ETH_HandleTypeDef *heth); /*!< ETH Rx Complete Callback */ + void (* DMAErrorCallback)(struct __ETH_HandleTypeDef *heth); /*!< DMA Error Callback */ + void (* MspInitCallback)(struct __ETH_HandleTypeDef *heth); /*!< ETH Msp Init callback */ + void (* MspDeInitCallback)(struct __ETH_HandleTypeDef *heth); /*!< ETH Msp DeInit callback */ #endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ @@ -653,18 +642,18 @@ typedef enum HAL_ETH_RX_COMPLETE_CB_ID = 0x03U, /*!< ETH Rx Complete Callback ID */ HAL_ETH_DMA_ERROR_CB_ID = 0x04U, /*!< ETH DMA Error Callback ID */ -}HAL_ETH_CallbackIDTypeDef; +} HAL_ETH_CallbackIDTypeDef; /** * @brief HAL ETH Callback pointer definition */ -typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to an ETH callback function */ +typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef *heth); /*!< pointer to an ETH callback function */ #endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - /** - * @} - */ +/** + * @} + */ /* Exported constants --------------------------------------------------------*/ /** @defgroup ETH_Exported_Constants ETH Exported Constants @@ -683,62 +672,62 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to #define ETH_MAX_ETH_PAYLOAD 1500U /*!< Maximum Ethernet payload size */ #define ETH_JUMBO_FRAME_PAYLOAD 9000U /*!< Jumbo frame payload size */ - /* Ethernet driver receive buffers are organized in a chained linked-list, when - an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO - to the driver receive buffers memory. +/* Ethernet driver receive buffers are organized in a chained linked-list, when + an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO + to the driver receive buffers memory. - Depending on the size of the received ethernet packet and the size of - each ethernet driver receive buffer, the received packet can take one or more - ethernet driver receive buffer. + Depending on the size of the received ethernet packet and the size of + each ethernet driver receive buffer, the received packet can take one or more + ethernet driver receive buffer. - In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE - and the total count of the driver receive buffers ETH_RXBUFNB. + In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE + and the total count of the driver receive buffers ETH_RXBUFNB. - The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as - example, they can be reconfigured in the application layer to fit the application - needs */ + The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as + example, they can be reconfigured in the application layer to fit the application + needs */ /* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet packet */ #ifndef ETH_RX_BUF_SIZE - #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE #endif /* 5 Ethernet driver receive buffers are used (in a chained linked list)*/ #ifndef ETH_RXBUFNB - #define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ #endif - /* Ethernet driver transmit buffers are organized in a chained linked-list, when - an ethernet packet is transmitted, Tx-DMA will transfer the packet from the - driver transmit buffers memory to the TxFIFO. +/* Ethernet driver transmit buffers are organized in a chained linked-list, when + an ethernet packet is transmitted, Tx-DMA will transfer the packet from the + driver transmit buffers memory to the TxFIFO. - Depending on the size of the Ethernet packet to be transmitted and the size of - each ethernet driver transmit buffer, the packet to be transmitted can take - one or more ethernet driver transmit buffer. + Depending on the size of the Ethernet packet to be transmitted and the size of + each ethernet driver transmit buffer, the packet to be transmitted can take + one or more ethernet driver transmit buffer. - In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE - and the total count of the driver transmit buffers ETH_TXBUFNB. + In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE + and the total count of the driver transmit buffers ETH_TXBUFNB. - The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as - example, they can be reconfigured in the application layer to fit the application - needs */ + The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as + example, they can be reconfigured in the application layer to fit the application + needs */ /* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet packet */ #ifndef ETH_TX_BUF_SIZE - #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE #endif /* 5 ethernet driver transmit buffers are used (in a chained linked list)*/ #ifndef ETH_TXBUFNB - #define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ +#define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ #endif - /** - * @} - */ +/** + * @} + */ /** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor * @{ @@ -806,18 +795,6 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to */ #define ETH_DMATXDESC_B2AP 0xFFFFFFFFU /*!< Buffer2 Address Pointer */ - /*--------------------------------------------------------------------------------------------- - TDES6 | Transmit Time Stamp Low [31:0] | - ----------------------------------------------------------------------------------------------- - TDES7 | Transmit Time Stamp High [31:0] | - ----------------------------------------------------------------------------------------------*/ - -/* Bit definition of TDES6 register */ - #define ETH_DMAPTPTXDESC_TTSL 0xFFFFFFFFU /* Transmit Time Stamp Low */ - -/* Bit definition of TDES7 register */ - #define ETH_DMAPTPTXDESC_TTSH 0xFFFFFFFFU /* Transmit Time Stamp High */ - /** * @} */ @@ -880,48 +857,12 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to */ #define ETH_DMARXDESC_B2AP 0xFFFFFFFFU /*!< Buffer2 Address Pointer */ -/*--------------------------------------------------------------------------------------------------------------------- - RDES4 | Reserved[31:15] | Extended Status [14:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES5 | Reserved[31:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES6 | Receive Time Stamp Low [31:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES7 | Receive Time Stamp High [31:0] | - --------------------------------------------------------------------------------------------------------------------*/ - -/* Bit definition of RDES4 register */ -#define ETH_DMAPTPRXDESC_PTPV 0x00002000U /* PTP Version */ -#define ETH_DMAPTPRXDESC_PTPFT 0x00001000U /* PTP Frame Type */ -#define ETH_DMAPTPRXDESC_PTPMT 0x00000F00U /* PTP Message Type */ - #define ETH_DMAPTPRXDESC_PTPMT_SYNC 0x00000100U /* SYNC message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP 0x00000200U /* FollowUp message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ 0x00000300U /* DelayReq message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP 0x00000400U /* DelayResp message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE 0x00000500U /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */ - #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG 0x00000600U /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */ - #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL 0x00000700U /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */ -#define ETH_DMAPTPRXDESC_IPV6PR 0x00000080U /* IPv6 Packet Received */ -#define ETH_DMAPTPRXDESC_IPV4PR 0x00000040U /* IPv4 Packet Received */ -#define ETH_DMAPTPRXDESC_IPCB 0x00000020U /* IP Checksum Bypassed */ -#define ETH_DMAPTPRXDESC_IPPE 0x00000010U /* IP Payload Error */ -#define ETH_DMAPTPRXDESC_IPHE 0x00000008U /* IP Header Error */ -#define ETH_DMAPTPRXDESC_IPPT 0x00000007U /* IP Payload Type */ - #define ETH_DMAPTPRXDESC_IPPT_UDP 0x00000001U /* UDP payload encapsulated in the IP datagram */ - #define ETH_DMAPTPRXDESC_IPPT_TCP 0x00000002U /* TCP payload encapsulated in the IP datagram */ - #define ETH_DMAPTPRXDESC_IPPT_ICMP 0x00000003U /* ICMP payload encapsulated in the IP datagram */ - -/* Bit definition of RDES6 register */ -#define ETH_DMAPTPRXDESC_RTSL 0xFFFFFFFFU /* Receive Time Stamp Low */ - -/* Bit definition of RDES7 register */ -#define ETH_DMAPTPRXDESC_RTSH 0xFFFFFFFFU /* Receive Time Stamp High */ /** * @} */ - /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation - * @{ - */ +/** @defgroup ETH_AutoNegotiation ETH AutoNegotiation + * @{ + */ #define ETH_AUTONEGOTIATION_ENABLE 0x00000001U #define ETH_AUTONEGOTIATION_DISABLE 0x00000000U @@ -967,7 +908,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to * @{ */ #define ETH_MEDIA_INTERFACE_MII 0x00000000U -#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL) +#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)AFIO_MAPR_MII_RMII_SEL) + /** * @} */ @@ -1386,15 +1328,7 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to #define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT 0x01000800U /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ #define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT 0x01001000U /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ #define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT 0x01002000U /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ -/** - * @} - */ -/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format - * @{ - */ -#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE 0x00000080U -#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE 0x00000000U /** * @} */ @@ -1605,7 +1539,7 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to */ /** @brief Reset ETH handle state - * @param __HANDLE__ specifies the ETH handle. + * @param __HANDLE__: specifies the ETH handle. * @retval None */ #if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) @@ -1620,73 +1554,73 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not. - * @param __HANDLE__ ETH Handle - * @param __FLAG__ specifies the flag of TDES0 to check. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag of TDES0 to check. * @retval the ETH_DMATxDescFlag (SET or RESET). */ #define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__)) /** * @brief Checks whether the specified ETHERNET DMA Rx Desc flag is set or not. - * @param __HANDLE__ ETH Handle - * @param __FLAG__ specifies the flag of RDES0 to check. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag of RDES0 to check. * @retval the ETH_DMATxDescFlag (SET or RESET). */ #define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__)) /** * @brief Enables the specified DMA Rx Desc receive interrupt. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC)) /** * @brief Disables the specified DMA Rx Desc receive interrupt. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC) /** * @brief Set the specified DMA Rx Desc Own bit. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN) /** * @brief Returns the specified ETHERNET DMA Tx Desc collision count. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval The Transmit descriptor collision counter value. */ #define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT) /** * @brief Set the specified DMA Tx Desc Own bit. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN) /** * @brief Enables the specified DMA Tx Desc Transmit interrupt. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC) /** * @brief Disables the specified DMA Tx Desc Transmit interrupt. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC) /** * @brief Selects the specified ETHERNET DMA Tx Desc Checksum Insertion. - * @param __HANDLE__ ETH Handle - * @param __CHECKSUM__ specifies is the DMA Tx desc checksum insertion. + * @param __HANDLE__: ETH Handle + * @param __CHECKSUM__: specifies is the DMA Tx desc checksum insertion. * This parameter can be one of the following values: * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum @@ -1698,36 +1632,36 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Enables the DMA Tx Desc CRC. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC) /** * @brief Disables the DMA Tx Desc CRC. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC) /** * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP) /** * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP) /** * @brief Enables the specified ETHERNET MAC interrupts. - * @param __HANDLE__ ETH Handle - * @param __INTERRUPT__ specifies the ETHERNET MAC interrupt sources to be + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be * enabled or disabled. * This parameter can be any combination of the following values: * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt @@ -1738,8 +1672,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Disables the specified ETHERNET MAC interrupts. - * @param __HANDLE__ ETH Handle - * @param __INTERRUPT__ specifies the ETHERNET MAC interrupt sources to be + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be * enabled or disabled. * This parameter can be any combination of the following values: * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt @@ -1750,36 +1684,36 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Initiate a Pause Control Frame (Full-duplex only). - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA) /** * @brief Checks whether the ETHERNET flow control busy bit is set or not. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval The new state of flow control busy status bit (SET or RESET). */ #define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA) /** * @brief Enables the MAC Back Pressure operation activation (Half-duplex only). - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA) /** * @brief Disables the MAC BackPressure operation activation (Half-duplex only). - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA) /** * @brief Checks whether the specified ETHERNET MAC flag is set or not. - * @param __HANDLE__ ETH Handle - * @param __FLAG__ specifies the flag to check. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag @@ -1792,8 +1726,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Enables the specified ETHERNET DMA interrupts. - * @param __HANDLE__ ETH Handle - * @param __INTERRUPT__ specifies the ETHERNET DMA interrupt sources to be + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be * enabled @ref ETH_DMA_Interrupts * @retval None */ @@ -1801,8 +1735,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Disables the specified ETHERNET DMA interrupts. - * @param __HANDLE__ ETH Handle - * @param __INTERRUPT__ specifies the ETHERNET DMA interrupt sources to be + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be * disabled. @ref ETH_DMA_Interrupts * @retval None */ @@ -1810,32 +1744,32 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Clears the ETHERNET DMA IT pending bit. - * @param __HANDLE__ ETH Handle - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts * @retval None */ #define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__)) /** * @brief Checks whether the specified ETHERNET DMA flag is set or not. -* @param __HANDLE__ ETH Handle - * @param __FLAG__ specifies the flag to check. @ref ETH_DMA_Flags +* @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags * @retval The new state of ETH_DMA_FLAG (SET or RESET). */ #define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__)) /** * @brief Checks whether the specified ETHERNET DMA flag is set or not. - * @param __HANDLE__ ETH Handle - * @param __FLAG__ specifies the flag to clear. @ref ETH_DMA_Flags + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags * @retval The new state of ETH_DMA_FLAG (SET or RESET). */ #define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__)) /** * @brief Checks whether the specified ETHERNET DMA overflow flag is set or not. - * @param __HANDLE__ ETH Handle - * @param __OVERFLOW__ specifies the DMA overflow flag to check. + * @param __HANDLE__: ETH Handle + * @param __OVERFLOW__: specifies the DMA overflow flag to check. * This parameter can be one of the following values: * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter @@ -1845,8 +1779,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Set the DMA Receive status watchdog timer register value - * @param __HANDLE__ ETH Handle - * @param __VALUE__ DMA Receive status watchdog timer register value + * @param __HANDLE__: ETH Handle + * @param __VALUE__: DMA Receive status watchdog timer register value * @retval None */ #define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__)) @@ -1854,7 +1788,7 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Enables any unicast packet filtered by the MAC address * recognition to be a wake-up frame. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU) @@ -1862,57 +1796,57 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Disables any unicast packet filtered by the MAC address * recognition to be a wake-up frame. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU) /** * @brief Enables the MAC Wake-Up Frame Detection. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE) /** * @brief Disables the MAC Wake-Up Frame Detection. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE) /** * @brief Enables the MAC Magic Packet Detection. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE) /** * @brief Disables the MAC Magic Packet Detection. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE) /** * @brief Enables the MAC Power Down. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD) /** * @brief Disables the MAC Power Down. - * @param __HANDLE__ ETH Handle + * @param __HANDLE__: ETH Handle * @retval None */ #define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD) /** * @brief Checks whether the specified ETHERNET PMT flag is set or not. - * @param __HANDLE__ ETH Handle. - * @param __FLAG__ specifies the flag to check. + * @param __HANDLE__: ETH Handle. + * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received @@ -1923,72 +1857,72 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16) - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP)) /** * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16) - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\ - (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0) + (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while(0U) /** * @brief Enables the MMC Counter Freeze. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF) /** * @brief Disables the MMC Counter Freeze. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF) /** * @brief Enables the MMC Reset On Read. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR) /** * @brief Disables the MMC Reset On Read. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR) /** * @brief Enables the MMC Counter Stop Rollover. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR) /** * @brief Disables the MMC Counter Stop Rollover. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR) /** * @brief Resets the MMC Counters. - * @param __HANDLE__ ETH Handle. + * @param __HANDLE__: ETH Handle. * @retval None */ #define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR) /** * @brief Enables the specified ETHERNET MMC Rx interrupts. - * @param __HANDLE__ ETH Handle. - * @param __INTERRUPT__ specifies the ETHERNET MMC interrupt sources to be enabled or disabled. + * @param __HANDLE__: ETH Handle. + * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. * This parameter can be one of the following values: * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value @@ -1998,8 +1932,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to #define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFFU) /** * @brief Disables the specified ETHERNET MMC Rx interrupts. - * @param __HANDLE__ ETH Handle. - * @param __INTERRUPT__ specifies the ETHERNET MMC interrupt sources to be enabled or disabled. + * @param __HANDLE__: ETH Handle. + * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. * This parameter can be one of the following values: * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value @@ -2009,8 +1943,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to #define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFFU) /** * @brief Enables the specified ETHERNET MMC Tx interrupts. - * @param __HANDLE__ ETH Handle. - * @param __INTERRUPT__ specifies the ETHERNET MMC interrupt sources to be enabled or disabled. + * @param __HANDLE__: ETH Handle. + * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. * This parameter can be one of the following values: * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value @@ -2021,8 +1955,8 @@ typedef void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef * heth); /*!< pointer to /** * @brief Disables the specified ETHERNET MMC Tx interrupts. - * @param __HANDLE__ ETH Handle. - * @param __INTERRUPT__ specifies the ETHERNET MMC interrupt sources to be enabled or disabled. + * @param __HANDLE__: ETH Handle. + * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. * This parameter can be one of the following values: * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value @@ -2131,7 +2065,7 @@ HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth); HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth); void HAL_ETH_MspInit(ETH_HandleTypeDef *heth); void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount); +HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount); HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) @@ -2199,11 +2133,13 @@ HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth); * @} */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\ - STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +#endif /* ETH */ #ifdef __cplusplus } #endif -#endif /* __STM32F4xx_HAL_ETH_LEGACY_H */ +#endif /* __STM32F1xx_HAL_ETH_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h similarity index 54% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h index b18a228..3a79557 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_exti.h + * @file stm32f1xx_hal_exti.h * @author MCD Application Team * @brief Header file of EXTI HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32f4xx_HAL_EXTI_H -#define STM32f4xx_HAL_EXTI_H +#ifndef STM32F1xx_HAL_EXTI_H +#define STM32F1xx_HAL_EXTI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -41,6 +42,10 @@ extern "C" { /** @defgroup EXTI_Exported_Types EXTI Exported Types * @{ */ + +/** + * @brief HAL EXTI common Callback ID enumeration definition + */ typedef enum { HAL_EXTI_COMMON_CB_ID = 0x00U @@ -83,44 +88,30 @@ typedef struct /** @defgroup EXTI_Line EXTI Line * @{ */ -#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ -#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ -#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ -#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ -#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ -#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ -#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ -#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ -#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ -#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ -#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ -#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ -#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ -#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ -#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ -#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ -#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ -#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ +#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ +#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ +#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ +#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ +#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ +#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ +#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ +#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ +#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ +#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ +#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ +#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ +#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ +#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ +#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ +#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ #if defined(EXTI_IMR_IM18) -#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ -#else -#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */ +#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB Wakeup from suspend event */ #endif /* EXTI_IMR_IM18 */ #if defined(EXTI_IMR_IM19) -#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ -#else -#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */ +#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ #endif /* EXTI_IMR_IM19 */ -#if defined(EXTI_IMR_IM20) -#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ -#else -#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM20 */ -#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */ -#endif /* EXTI_IMR_IM23 */ /** * @} @@ -139,7 +130,6 @@ typedef struct /** @defgroup EXTI_Trigger EXTI Trigger * @{ */ - #define EXTI_TRIGGER_NONE 0x00000000u #define EXTI_TRIGGER_RISING 0x00000001u #define EXTI_TRIGGER_FALLING 0x00000002u @@ -155,9 +145,7 @@ typedef struct #define EXTI_GPIOA 0x00000000u #define EXTI_GPIOB 0x00000001u #define EXTI_GPIOC 0x00000002u -#if defined (GPIOD) #define EXTI_GPIOD 0x00000003u -#endif /* GPIOD */ #if defined (GPIOE) #define EXTI_GPIOE 0x00000004u #endif /* GPIOE */ @@ -167,19 +155,6 @@ typedef struct #if defined (GPIOG) #define EXTI_GPIOG 0x00000006u #endif /* GPIOG */ -#if defined (GPIOH) -#define EXTI_GPIOH 0x00000007u -#endif /* GPIOH */ -#if defined (GPIOI) -#define EXTI_GPIOI 0x00000008u -#endif /* GPIOI */ -#if defined (GPIOJ) -#define EXTI_GPIOJ 0x00000009u -#endif /* GPIOJ */ -#if defined (GPIOK) -#define EXTI_GPIOK 0x0000000Au -#endif /* GPIOK */ - /** * @} */ @@ -204,10 +179,9 @@ typedef struct /** * @brief EXTI Line property definition */ -#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_PROPERTY_SHIFT 24u #define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) #define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) -#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) #define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO) /** @@ -228,12 +202,13 @@ typedef struct /** * @brief EXTI Line number */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_NB 24UL -#else -#define EXTI_LINE_NB 23UL -#endif /* EXTI_IMR_IM23 */ - +#if defined(EXTI_IMR_IM19) +#define EXTI_LINE_NB 20UL +#elif defined(EXTI_IMR_IM18) +#define EXTI_LINE_NB 19UL +#else /* EXTI_IMR_IM17 */ +#define EXTI_LINE_NB 18UL +#endif /* EXTI_IMR_IM19 */ /** * @} */ @@ -243,71 +218,49 @@ typedef struct * @{ */ #define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ - ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ - (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) #define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) -#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) #define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) #define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) -#if !defined (GPIOD) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOE) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOF) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOI) +#if defined (GPIOG) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ ((__PORT__) == EXTI_GPIOD) || \ ((__PORT__) == EXTI_GPIOE) || \ ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOJ) + ((__PORT__) == EXTI_GPIOG)) +#elif defined (GPIOF) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ ((__PORT__) == EXTI_GPIOD) || \ ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI)) + ((__PORT__) == EXTI_GPIOF)) +#elif defined (GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE)) #else #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI) || \ - ((__PORT__) == EXTI_GPIOJ) || \ - ((__PORT__) == EXTI_GPIOK)) -#endif /* GPIOD */ + ((__PORT__) == EXTI_GPIOD)) +#endif /* GPIOG */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) -#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U) /** * @} */ @@ -337,10 +290,10 @@ HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLin * @{ */ /* IO operation functions *****************************************************/ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); /** * @} @@ -362,5 +315,6 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); } #endif -#endif /* STM32f4xx_HAL_EXTI_H */ +#endif /* STM32F1xx_HAL_EXTI_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h new file mode 100644 index 0000000..52e480b --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of Flash HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_FLASH_H +#define __STM32F1xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ +/** + * @} + */ + +/** @addtogroup FLASH_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) + +#if defined(FLASH_ACR_LATENCY) +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1) || \ + ((__LATENCY__) == FLASH_LATENCY_2)) + +#else +#define IS_FLASH_LATENCY(__LATENCY__) ((__LATENCY__) == FLASH_LATENCY_0) +#endif /* FLASH_ACR_LATENCY */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_PAGEERASE = 1U, + FLASH_PROC_MASSERASE = 2U, + FLASH_PROC_PROGRAMHALFWORD = 3U, + FLASH_PROC_PROGRAMWORD = 4U, + FLASH_PROC_PROGRAMDOUBLEWORD = 5U +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ + + __IO uint64_t Data; /*!< Internal variable to save data to be programmed */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code + This parameter can be a value of @ref FLASH_Error_Codes */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Codes FLASH Error Codes + * @{ + */ + +#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ +#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */ +#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ +#define HAL_FLASH_ERROR_OPTV 0x04U /*!< Option validity error */ + +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_HALFWORD 0x01U /*!ACR |= FLASH_ACR_HLFCYA) + +/** + * @brief Disable the FLASH half cycle access. + * @note half cycle access can only be used with a low-frequency clock of less than + 8 MHz that can be obtained with the use of HSI or HSE but not of PLL. + * @retval None + */ +#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA)) + +/** + * @} + */ + +#if defined(FLASH_ACR_LATENCY) +/** @defgroup FLASH_EM_Latency FLASH Latency + * @brief macros to handle FLASH Latency + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * The value of this parameter depend on device used within the same series + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) + + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @} + */ + +#endif /* FLASH_ACR_LATENCY */ +/** @defgroup FLASH_Prefetch FLASH Prefetch + * @brief macros to handle FLASH Prefetch buffer + * @{ + */ +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32f1xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); + +/* FLASH IRQ handler function */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +void HAL_FLASH_OB_Launch(void); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +uint32_t HAL_FLASH_GetError(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private function -------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +#if defined(FLASH_BANK2_END) +HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout); +#endif /* FLASH_BANK2_END */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h new file mode 100644 index 0000000..0a5b24a --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h @@ -0,0 +1,786 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of Flash HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_FLASH_EX_H +#define __STM32F1xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/** @addtogroup FLASHEx_Private_Constants + * @{ + */ + +#define FLASH_SIZE_DATA_REGISTER 0x1FFFF7E0U +#define OBR_REG_INDEX 1U +#define SR_FLAG_MASK ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP)) + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))) + +#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) + +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) + +#if defined(FLASH_BANK2_END) +#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) +#endif /* FLASH_BANK2_END */ + +/* Low Density */ +#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08007FFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08003FFFU)) +#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ + +/* Medium Density */ +#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFFU)))) +#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ + +/* High Density */ +#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU))) +#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ + +/* XL Density */ +#if defined(FLASH_BANK2_END) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFFU)) +#endif /* FLASH_BANK2_END */ + +/* Connectivity Line */ +#if (defined(STM32F105xC) || defined(STM32F107xC)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU))) +#endif /* STM32F105xC || STM32F107xC */ + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U)) + +#if defined(FLASH_BANK2_END) +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2) || \ + ((BANK) == FLASH_BANK_BOTH)) +#else +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)) +#endif /* FLASH_BANK2_END */ + +/* Low Density */ +#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : ((ADDRESS) <= 0x08003FFFU))) + +#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ + +/* Medium Density */ +#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \ + ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \ + ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFFU))))) + +#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ + +/* High Density */ +#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? \ + ((ADDRESS) <= 0x0805FFFFU) : ((ADDRESS) <= 0x0803FFFFU)))) + +#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ + +/* XL Density */ +#if defined(FLASH_BANK2_END) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? \ + ((ADDRESS) <= FLASH_BANK2_END) : ((ADDRESS) <= 0x080BFFFFU))) + +#endif /* FLASH_BANK2_END */ + +/* Connectivity Line */ +#if (defined(STM32F105xC) || defined(STM32F107xC)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \ + ((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU)))) + +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled + This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END + (x = 1 or 2 depending on devices)*/ + + uint32_t NbPages; /*!< NbPages: Number of pagess to be erased. + This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Options bytes program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured. + This parameter can be a value of @ref FLASHEx_OB_Type */ + + uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_OB_WRP_State */ + + uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected + This parameter can be a value of @ref FLASHEx_OB_Write_Protection */ + + uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.. + This parameter can be a value of @ref FLASHEx_OB_Read_Protection */ + +#if defined(FLASH_BANK2_END) + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: + IWDG / STOP / STDBY / BOOT1 + This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, + @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */ +#else + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: + IWDG / STOP / STDBY + This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, + @ref FLASHEx_OB_nRST_STDBY */ +#endif /* FLASH_BANK2_END */ + + uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed + This parameter can be a value of @ref FLASHEx_OB_Data_Address */ + + uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ +} FLASH_OBProgramInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Constants FLASH Constants + * @{ + */ + +/** @defgroup FLASHEx_Page_Size Page Size + * @{ + */ +#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) +#define FLASH_PAGE_SIZE 0x400U +#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ + /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ + +#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)) +#define FLASH_PAGE_SIZE 0x800U +#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ + /* STM32F101xG || STM32F103xG */ + /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Type_Erase Type Erase + * @{ + */ +#define FLASH_TYPEERASE_PAGES 0x00U /*!CR, ((__INTERRUPT__) & 0x0000FFFFU)); \ + /* Enable Bank2 IT */ \ + SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \ + } while(0U) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1 + * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1 + * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2 + * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2 + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { \ + /* Disable Bank1 IT */ \ + CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \ + /* Disable Bank2 IT */ \ + CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \ + } while(0U) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 + * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 + * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 + * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 + * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 + * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 + * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 + * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ + (FLASH->OBR & FLASH_OBR_OPTERR) : \ + ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \ + (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \ + (FLASH->SR2 & ((__FLAG__) >> 16U)))) + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 + * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 + * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 + * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 + * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 + * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 + * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 + * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ + /* Clear FLASH_FLAG_OPTVERR flag */ \ + if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ + { \ + CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ + } \ + else { \ + /* Clear Flag in Bank1 */ \ + if (((__FLAG__) & SR_FLAG_MASK) != RESET) \ + { \ + FLASH->SR = ((__FLAG__) & SR_FLAG_MASK); \ + } \ + /* Clear Flag in Bank2 */ \ + if (((__FLAG__) >> 16U) != RESET) \ + { \ + FLASH->SR2 = ((__FLAG__) >> 16U); \ + } \ + } \ + } while(0U) +#else +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_BSY FLASH Busy flag + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ + (FLASH->OBR & FLASH_OBR_OPTERR) : \ + (FLASH->SR & (__FLAG__))) +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ + /* Clear FLASH_FLAG_OPTVERR flag */ \ + if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ + { \ + CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ + } \ + else { \ + /* Clear Flag in Bank1 */ \ + FLASH->SR = (__FLAG__); \ + } \ + } while(0U) + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); + +/** + * @} + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASHEx_OBErase(void); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_FLASH_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h similarity index 55% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h index 5f3d749..a344f8f 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h @@ -1,48 +1,49 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_gpio.h + * @file stm32f1xx_hal_gpio.h * @author MCD Application Team * @brief Header file of GPIO HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_H -#define __STM32F4xx_HAL_GPIO_H +#ifndef STM32F1xx_HAL_GPIO_H +#define STM32F1xx_HAL_GPIO_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @addtogroup GPIO * @{ - */ + */ /* Exported types ------------------------------------------------------------*/ /** @defgroup GPIO_Exported_Types GPIO Exported Types * @{ */ -/** - * @brief GPIO Init structure definition - */ +/** + * @brief GPIO Init structure definition + */ typedef struct { uint32_t Pin; /*!< Specifies the GPIO pins to be configured. @@ -56,19 +57,16 @@ typedef struct uint32_t Speed; /*!< Specifies the speed for the selected pins. This parameter can be a value of @ref GPIO_speed_define */ +} GPIO_InitTypeDef; - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_Alternate_function_selection */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration +/** + * @brief GPIO Bit SET and Bit RESET enumeration */ typedef enum { - GPIO_PIN_RESET = 0, + GPIO_PIN_RESET = 0u, GPIO_PIN_SET -}GPIO_PinState; +} GPIO_PinState; /** * @} */ @@ -77,7 +75,7 @@ typedef enum /** @defgroup GPIO_Exported_Constants GPIO Exported Constants * @{ - */ + */ /** @defgroup GPIO_pins_define GPIO pins define * @{ @@ -100,35 +98,37 @@ typedef enum #define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ #define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ -#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */ +#define GPIO_PIN_MASK 0x0000FFFFu /* PIN mask for assert test */ /** * @} */ /** @defgroup GPIO_mode_define GPIO mode define * @brief GPIO Configuration Mode - * Elements values convention: 0x00WX00YZ - * - W : EXTI trigger detection on 3 bits - * - X : EXTI mode (IT or Event) on 2 bits - * - Y : Output type (Push Pull or Open Drain) on 1 bit - * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) * @{ - */ -#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ + */ +#define GPIO_MODE_INPUT 0x00000000u /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP 0x00000001u /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD 0x00000011u /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP 0x00000002u /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD 0x00000012u /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */ -#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ - -#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - -#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_ANALOG 0x00000003u /*!< Analog Mode */ + +#define GPIO_MODE_IT_RISING 0x10110000u /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING 0x10210000u /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING 0x10310000u /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define GPIO_MODE_EVT_RISING 0x10120000u /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING 0x10220000u /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING 0x10320000u /*!< External Event Mode with Rising/Falling edge trigger detection */ /** * @} @@ -138,25 +138,25 @@ typedef enum * @brief GPIO Output Maximum frequency * @{ */ -#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (GPIO_CRL_MODE0) /*!< High speed */ + /** * @} */ - /** @defgroup GPIO_pull_define GPIO pull define - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */ -#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */ +/** @defgroup GPIO_pull_define GPIO pull define + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ /** * @} */ - + /** * @} */ @@ -168,7 +168,7 @@ typedef enum /** * @brief Checks whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. * This parameter can be GPIO_PIN_x where x can be(0..15) * @retval The new state of __EXTI_LINE__ (SET or RESET). */ @@ -176,7 +176,7 @@ typedef enum /** * @brief Clears the EXTI's line pending flags. - * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) * @retval None */ @@ -184,7 +184,7 @@ typedef enum /** * @brief Checks whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__ specifies the EXTI line to check. + * @param __EXTI_LINE__: specifies the EXTI line to check. * This parameter can be GPIO_PIN_x where x can be(0..15) * @retval The new state of __EXTI_LINE__ (SET or RESET). */ @@ -192,7 +192,7 @@ typedef enum /** * @brief Clears the EXTI's line pending bits. - * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) * @retval None */ @@ -200,7 +200,7 @@ typedef enum /** * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__ specifies the EXTI line to check. + * @param __EXTI_LINE__: specifies the EXTI line to check. * This parameter can be GPIO_PIN_x where x can be(0..15) * @retval None */ @@ -210,7 +210,7 @@ typedef enum */ /* Include GPIO HAL Extension module */ -#include "stm32f4xx_hal_gpio_ex.h" +#include "stm32f1xx_hal_gpio_ex.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup GPIO_Exported_Functions @@ -231,44 +231,26 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); * @{ */ /* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); /** * @} - */ + */ /** * @} - */ + */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup GPIO_Private_Constants GPIO Private Constants * @{ */ -#define GPIO_MODE_Pos 0U -#define GPIO_MODE (0x3UL << GPIO_MODE_Pos) -#define MODE_INPUT (0x0UL << GPIO_MODE_Pos) -#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos) -#define MODE_AF (0x2UL << GPIO_MODE_Pos) -#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos) -#define OUTPUT_TYPE_Pos 4U -#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos) -#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos) -#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos) -#define EXTI_MODE_Pos 16U -#define EXTI_MODE (0x3UL << EXTI_MODE_Pos) -#define EXTI_IT (0x1UL << EXTI_MODE_Pos) -#define EXTI_EVT (0x2UL << EXTI_MODE_Pos) -#define TRIGGER_MODE_Pos 20U -#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos) -#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos) -#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos) /** * @} @@ -279,7 +261,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); * @{ */ #define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U)) +#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00u) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00u)) #define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ @@ -292,8 +274,8 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); ((MODE) == GPIO_MODE_EVT_FALLING) ||\ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ ((MODE) == GPIO_MODE_ANALOG)) -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ - ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \ + ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH)) #define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ ((PULL) == GPIO_PULLDOWN)) /** @@ -311,7 +293,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); /** * @} - */ + */ /** * @} @@ -321,5 +303,6 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); } #endif -#endif /* __STM32F4xx_HAL_GPIO_H */ +#endif /* STM32F1xx_HAL_GPIO_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h new file mode 100644 index 0000000..5f6c3fd --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h @@ -0,0 +1,894 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_GPIO_EX_H +#define STM32F1xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration + * @brief This section propose definition to use the Cortex EVENTOUT signal. + * @{ + */ + +/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin + * @{ + */ + +#define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */ +#define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */ +#define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */ +#define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */ +#define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */ +#define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */ +#define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */ +#define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */ +#define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */ +#define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */ +#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */ +#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */ +#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */ +#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */ +#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */ +#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */ + +#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_15)) +/** + * @} + */ + +/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port + * @{ + */ + +#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */ +#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */ +#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */ +#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */ +#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */ + +#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_E)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping + * @brief This section propose definition to remap the alternate function to some other port/pins. + * @{ + */ + +/** + * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. + * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5) + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP) + +/** + * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. + * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7) + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP) + +/** + * @brief Enable the remapping of I2C1 alternate function SCL and SDA. + * @note ENABLE: Remap (SCL/PB8, SDA/PB9) + * @retval None + */ +#define __HAL_AFIO_REMAP_I2C1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP) + +/** + * @brief Disable the remapping of I2C1 alternate function SCL and SDA. + * @note DISABLE: No remap (SCL/PB6, SDA/PB7) + * @retval None + */ +#define __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP) + +/** + * @brief Enable the remapping of USART1 alternate function TX and RX. + * @note ENABLE: Remap (TX/PB6, RX/PB7) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP) + +/** + * @brief Disable the remapping of USART1 alternate function TX and RX. + * @note DISABLE: No remap (TX/PA9, RX/PA10) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP) + +/** + * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. + * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP) + +/** + * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. + * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP) + +/** + * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 + * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 + * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of TIM3 alternate function channels 1 to 4 + * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM4 alternate function channels 1 to 4. + * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15) + * @note TIM4_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP) + +/** + * @brief Disable the remapping of TIM4 alternate function channels 1 to 4. + * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9) + * @note TIM4_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP) + +#if defined(AFIO_MAPR_CAN_REMAP_REMAP1) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12 + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN1_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP1, AFIO_MAPR_CAN_REMAP) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package) + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN1_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP2, AFIO_MAPR_CAN_REMAP) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1 + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN1_3() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP3, AFIO_MAPR_CAN_REMAP) + +#endif + +/** + * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used + * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and + * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available + * on 100-pin and 144-pin packages, no need for remapping). + * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT. + * @retval None + */ +#define __HAL_AFIO_REMAP_PD01_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP) + +/** + * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used + * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and + * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available + * on 100-pin and 144-pin packages, no need for remapping). + * @note DISABLE: No remapping of PD0 and PD1 + * @retval None + */ +#define __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP) + +#if defined(AFIO_MAPR_TIM5CH4_IREMAP) +/** + * @brief Enable the remapping of TIM5CH4. + * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose. + * @note This function is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM5CH4_IREMAP) + +/** + * @brief Disable the remapping of TIM5CH4. + * @note DISABLE: TIM5_CH4 is connected to PA3 + * @note This function is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM5CH4_IREMAP) +#endif + +#if defined(AFIO_MAPR_ETH_REMAP) +/** + * @brief Enable the remapping of Ethernet MAC connections with the PHY. + * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_ETH_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ETH_REMAP) + +/** + * @brief Disable the remapping of Ethernet MAC connections with the PHY. + * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_ETH_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ETH_REMAP) +#endif + +#if defined(AFIO_MAPR_CAN2_REMAP) + +/** + * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. + * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_CAN2_REMAP) + +/** + * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. + * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_CAN2_REMAP) +#endif + +#if defined(AFIO_MAPR_MII_RMII_SEL) +/** + * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. + * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_RMII() AFIO_REMAP_ENABLE(AFIO_MAPR_MII_RMII_SEL) + +/** + * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. + * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_MII() AFIO_REMAP_DISABLE(AFIO_MAPR_MII_RMII_SEL) +#endif + +/** + * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). + * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) + +/** + * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). + * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) + +/** + * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). + * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) + +/** + * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). + * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) + +#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). + * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP) + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). + * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP) +#endif + +#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP) + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP) +#endif + +/** + * @brief Enable the Serial wire JTAG configuration + * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State + * @retval None + */ +#define __HAL_AFIO_REMAP_SWJ_ENABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET) + +/** + * @brief Enable the Serial wire JTAG configuration + * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST + * @retval None + */ +#define __HAL_AFIO_REMAP_SWJ_NONJTRST() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST) + +/** + * @brief Enable the Serial wire JTAG configuration + * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled + * @retval None + */ + +#define __HAL_AFIO_REMAP_SWJ_NOJTAG() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE) + +/** + * @brief Disable the Serial wire JTAG configuration + * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled + * @retval None + */ +#define __HAL_AFIO_REMAP_SWJ_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE) + +#if defined(AFIO_MAPR_SPI3_REMAP) + +/** + * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. + * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI3_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI3_REMAP) + +/** + * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. + * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5). + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI3_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI3_REMAP) +#endif + +#if defined(AFIO_MAPR_TIM2ITR1_IREMAP) + +/** + * @brief Control of TIM2_ITR1 internal mapping. + * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_TIM2ITR1_TO_USB() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM2ITR1_IREMAP) + +/** + * @brief Control of TIM2_ITR1 internal mapping. + * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_TIM2ITR1_TO_ETH() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM2ITR1_IREMAP) +#endif + +#if defined(AFIO_MAPR_PTP_PPS_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note ENABLE: PTP_PPS is output on PB5 pin. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_PTP_PPS_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PTP_PPS_REMAP) + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note DISABLE: PTP_PPS not output on PB5 pin. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PTP_PPS_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM9_REMAP) + +/** + * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2. + * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) + +/** + * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2. + * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM10_REMAP) + +/** + * @brief Enable the remapping of TIM10_CH1. + * @note ENABLE: Remap (TIM10_CH1 on PF6). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) + +/** + * @brief Disable the remapping of TIM10_CH1. + * @note DISABLE: No remap (TIM10_CH1 on PB8). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM11_REMAP) +/** + * @brief Enable the remapping of TIM11_CH1. + * @note ENABLE: Remap (TIM11_CH1 on PF7). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) + +/** + * @brief Disable the remapping of TIM11_CH1. + * @note DISABLE: No remap (TIM11_CH1 on PB9). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM13_REMAP) + +/** + * @brief Enable the remapping of TIM13_CH1. + * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) + +/** + * @brief Disable the remapping of TIM13_CH1. + * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM14_REMAP) + +/** + * @brief Enable the remapping of TIM14_CH1. + * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) + +/** + * @brief Disable the remapping of TIM14_CH1. + * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) +#endif + +#if defined(AFIO_MAPR2_FSMC_NADV_REMAP) + +/** + * @brief Controls the use of the optional FSMC_NADV signal. + * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral. + * @retval None + */ +#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) + +/** + * @brief Controls the use of the optional FSMC_NADV signal. + * @note CONNECTED: The NADV signal is connected to the output (default). + * @retval None + */ +#define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM15_REMAP) + +/** + * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2. + * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) + +/** + * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2. + * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM16_REMAP) + +/** + * @brief Enable the remapping of TIM16_CH1. + * @note ENABLE: Remap (TIM16_CH1 on PA6). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) + +/** + * @brief Disable the remapping of TIM16_CH1. + * @note DISABLE: No remap (TIM16_CH1 on PB8). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM17_REMAP) + +/** + * @brief Enable the remapping of TIM17_CH1. + * @note ENABLE: Remap (TIM17_CH1 on PA7). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) + +/** + * @brief Disable the remapping of TIM17_CH1. + * @note DISABLE: No remap (TIM17_CH1 on PB9). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) +#endif + +#if defined(AFIO_MAPR2_CEC_REMAP) + +/** + * @brief Enable the remapping of CEC. + * @note ENABLE: Remap (CEC on PB10). + * @retval None + */ +#define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) + +/** + * @brief Disable the remapping of CEC. + * @note DISABLE: No remap (CEC on PB8). + * @retval None + */ +#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM1_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. + * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. + * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. + * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. + * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM12_REMAP) + +/** + * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2. + * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13). + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) + +/** + * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2. + * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5). + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) +#endif + +#if defined(AFIO_MAPR2_MISC_REMAP) + +/** + * @brief Miscellaneous features remapping. + * This bit is set and cleared by software. It controls miscellaneous features. + * The DMA2 channel 5 interrupt position in the vector table. + * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). + * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is + * selected as DAC Trigger 3, TIM15 triggers TIM1/3. + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) + +/** + * @brief Miscellaneous features remapping. + * This bit is set and cleared by software. It controls miscellaneous features. + * The DMA2 channel 5 interrupt position in the vector table. + * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). + * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO + * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3. + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros + * @{ + */ +#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :3uL) +#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :4uL) +#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :6uL) +#endif + +#define AFIO_REMAP_ENABLE(REMAP_PIN) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg |= AFIO_MAPR_SWJ_CFG; \ + tmpreg |= REMAP_PIN; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +#define AFIO_REMAP_DISABLE(REMAP_PIN) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg |= AFIO_MAPR_SWJ_CFG; \ + tmpreg &= ~REMAP_PIN; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +#define AFIO_REMAP_PARTIAL(REMAP_PIN, REMAP_PIN_MASK) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg &= ~REMAP_PIN_MASK; \ + tmpreg |= AFIO_MAPR_SWJ_CFG; \ + tmpreg |= REMAP_PIN; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +#define AFIO_DBGAFR_CONFIG(DBGAFR_SWJCFG) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg &= ~AFIO_MAPR_SWJ_CFG_Msk; \ + tmpreg |= DBGAFR_SWJCFG; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIOEx_Exported_Functions + * @{ + */ + +/** @addtogroup GPIOEx_Exported_Functions_Group1 + * @{ + */ +void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource); +void HAL_GPIOEx_EnableEventout(void); +void HAL_GPIOEx_DisableEventout(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_hcd.h similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_hcd.h index 9cd1486..f5b8ce5 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_hcd.h @@ -1,34 +1,35 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_hcd.h + * @file stm32f1xx_hal_hcd.h * @author MCD Application Team * @brief Header file of HCD HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_HCD_H -#define STM32F4xx_HAL_HCD_H +#ifndef STM32F1xx_HAL_HCD_H +#define STM32F1xx_HAL_HCD_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usb.h" +#include "stm32f1xx_ll_usb.h" -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver +#if defined (USB_OTG_FS) +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -107,7 +108,6 @@ typedef struct /** @defgroup HCD_Speed HCD Speed * @{ */ -#define HCD_SPEED_HIGH USBH_HS_SPEED #define HCD_SPEED_FULL USBH_FSLS_SPEED #define HCD_SPEED_LOW USBH_FSLS_SPEED /** @@ -307,10 +307,12 @@ uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd); /** * @} */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ #ifdef __cplusplus } #endif -#endif /* STM32F4xx_HAL_HCD_H */ +#endif /* STM32F1xx_HAL_HCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h similarity index 98% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h index 9a7a67e..8d5e284 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_i2c.h + * @file stm32f1xx_hal_i2c.h * @author MCD Application Team * @brief Header file of I2C HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_H -#define __STM32F4xx_HAL_I2C_H +#ifndef __STM32F1xx_HAL_I2C_H +#define __STM32F1xx_HAL_I2C_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -529,9 +530,6 @@ typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t Trans * @} */ -/* Include I2C HAL Extension module */ -#include "stm32f4xx_hal_i2c_ex.h" - /* Exported functions --------------------------------------------------------*/ /** @addtogroup I2C_Exported_Functions * @{ @@ -737,5 +735,6 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); #endif -#endif /* __STM32F4xx_HAL_I2C_H */ +#endif /* __STM32F1xx_HAL_I2C_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2s.h similarity index 81% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2s.h index 66cee01..2313768 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2s.h @@ -1,33 +1,35 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_i2s.h + * @file stm32f1xx_hal_i2s.h * @author MCD Application Team * @brief Header file of I2S HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_I2S_H -#define STM32F4xx_HAL_I2S_H +#ifndef STM32F1xx_HAL_I2S_H +#define STM32F1xx_HAL_I2S_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -62,11 +64,6 @@ typedef struct uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. This parameter can be a value of @ref I2S_Clock_Polarity */ - - uint32_t ClockSource; /*!< Specifies the I2S Clock Source. - This parameter can be a value of @ref I2S_Clock_Source */ - uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode. - This parameter can be a value of @ref I2S_FullDuplex_Mode */ } I2S_InitTypeDef; /** @@ -79,7 +76,6 @@ typedef enum HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ - HAL_I2S_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ } HAL_I2S_StateTypeDef; @@ -87,7 +83,11 @@ typedef enum /** * @brief I2S handle Structure definition */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1) typedef struct __I2S_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ { SPI_TypeDef *Instance; /*!< I2S registers base address */ @@ -109,8 +109,6 @@ typedef struct __I2S_HandleTypeDef beginning of the transfer and decremented when a sample is received NbSamplesReceived = RxBufferSize-RxBufferCount) */ - void (*IrqHandlerISR)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S function pointer on IrqHandler */ - DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ @@ -125,10 +123,8 @@ typedef struct __I2S_HandleTypeDef #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ - void (* TxRxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Completed callback */ void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ - void (* TxRxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Half Completed callback */ void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ @@ -144,10 +140,8 @@ typedef enum { HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ - HAL_I2S_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< I2S TxRx Completed callback ID */ HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ - HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< I2S TxRx Half Completed callback ID */ HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ @@ -245,15 +239,6 @@ typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to * @} */ -/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode - * @{ - */ -#define I2S_FULLDUPLEXMODE_DISABLE (0x00000000U) -#define I2S_FULLDUPLEXMODE_ENABLE (0x00000001U) -/** - * @} - */ - /** @defgroup I2S_Clock_Polarity I2S Clock Polarity * @{ */ @@ -287,32 +272,7 @@ typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to #define I2S_FLAG_BSY SPI_SR_BSY #define I2S_FLAG_MASK (SPI_SR_RXNE\ - | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) -/** - * @} - */ - -/** @defgroup I2S_Clock_Source I2S Clock Source Definition - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || defined(STM32F479xx) -#define I2S_CLOCK_PLL (0x00000000U) -#define I2S_CLOCK_EXTERNAL (0x00000001U) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define I2S_CLOCK_PLL (0x00000000U) -#define I2S_CLOCK_EXTERNAL (0x00000001U) -#define I2S_CLOCK_PLLR (0x00000002U) -#define I2S_CLOCK_PLLSRC (0x00000003U) -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define I2S_CLOCK_PLLSRC (0x00000000U) -#define I2S_CLOCK_EXTERNAL (0x00000001U) -#define I2S_CLOCK_PLLR (0x00000002U) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_CHSIDE | SPI_SR_BSY) /** * @} */ @@ -434,9 +394,6 @@ typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to * @} */ -/* Include I2S Extension module */ -#include "stm32f4xx_hal_i2s_ex.h" - /* Exported functions --------------------------------------------------------*/ /** @addtogroup I2S_Exported_Functions * @{ @@ -569,9 +526,6 @@ uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) -#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \ - ((MODE) == I2S_FULLDUPLEXMODE_ENABLE)) - /** @brief Checks if I2S Serial clock steady state parameter is in allowed range. * @param __CPOL__ specifies the I2S serial clock steady state. * This parameter can be a value of @ref I2S_Clock_Polarity @@ -580,24 +534,6 @@ uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); #define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ ((__CPOL__) == I2S_CPOL_HIGH)) -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\ - ((CLOCK) == I2S_CLOCK_PLL)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined (STM32F413xx) || defined(STM32F423xx) -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\ - ((CLOCK) == I2S_CLOCK_PLL) ||\ - ((CLOCK) == I2S_CLOCK_PLLSRC) ||\ - ((CLOCK) == I2S_CLOCK_PLLR)) -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\ - ((CLOCK) == I2S_CLOCK_PLLSRC) ||\ - ((CLOCK) == I2S_CLOCK_PLLR)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ /** * @} */ @@ -609,10 +545,12 @@ uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); /** * @} */ +#endif /* SPI_I2S_SUPPORT */ #ifdef __cplusplus } #endif -#endif /* STM32F4xx_HAL_I2S_H */ +#endif /* STM32F1xx_HAL_I2S_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_irda.h similarity index 95% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_irda.h index 0d1c5f1..aaff498 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_irda.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_irda.h + * @file stm32f1xx_hal_irda.h * @author MCD Application Team * @brief Header file of IRDA HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_IRDA_H -#define __STM32F4xx_HAL_IRDA_H +#ifndef __STM32F1xx_HAL_IRDA_H +#define __STM32F1xx_HAL_IRDA_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -46,8 +47,8 @@ typedef struct { uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ + - IntegerDivider = ((PCLKx) / (16 * (hirda->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. This parameter can be a value of @ref IRDA_Word_Length */ @@ -144,7 +145,7 @@ typedef struct IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ - const uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ @@ -499,18 +500,6 @@ typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer #define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == IRDA_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == IRDA_CR2_REG_INDEX)? \ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK)) -/** @brief Macro to enable the IRDA's one bit sample method - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 |= USART_CR3_ONEBIT) - -/** @brief Macro to disable the IRDA's one bit sample method - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) - /** @brief Enable UART/USART associated to IRDA Handle * @param __HANDLE__ specifies the IRDA Handle. * IRDA Handle selects the USARTx or UARTy peripheral @@ -559,11 +548,11 @@ HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRD * @{ */ /* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); @@ -641,7 +630,7 @@ uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); #define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201U) -#define IRDA_DIV(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(4U*(((uint64_t)(_BAUD_)))))) +#define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_))) #define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100U) @@ -678,5 +667,6 @@ uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); } #endif -#endif /* __STM32F4xx_HAL_IRDA_H */ +#endif /* __STM32F1xx_HAL_IRDA_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h similarity index 90% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h index 5273730..f0a2b54 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_iwdg.h + * @file stm32f1xx_hal_iwdg.h * @author MCD Application Team * @brief Header file of IWDG HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_IWDG_H -#define STM32F4xx_HAL_IWDG_H +#ifndef STM32F1xx_HAL_IWDG_H +#define STM32F1xx_HAL_IWDG_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -217,4 +218,6 @@ HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); } #endif -#endif /* STM32F4xx_HAL_IWDG_H */ +#endif /* STM32F1xx_HAL_IWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_mmc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_mmc.h similarity index 96% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_mmc.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_mmc.h index 30921aa..990b430 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_mmc.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_mmc.h @@ -1,24 +1,25 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_mmc.h + * @file stm32f1xx_hal_mmc.h * @author MCD Application Team * @brief Header file of MMC HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_MMC_H -#define STM32F4xx_HAL_MMC_H +#ifndef STM32F1xx_HAL_MMC_H +#define STM32F1xx_HAL_MMC_H #if defined(SDIO) @@ -27,9 +28,9 @@ #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_sdmmc.h" +#include "stm32f1xx_ll_sdmmc.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -144,8 +145,6 @@ typedef struct uint32_t CID[4U]; /*!< MMC card identification number table */ - uint32_t Ext_CSD[128]; - #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) void (* TxCpltCallback) (struct __MMC_HandleTypeDef *hmmc); void (* RxCpltCallback) (struct __MMC_HandleTypeDef *hmmc); @@ -335,12 +334,10 @@ typedef void (*pMMC_CallbackTypeDef) (MMC_HandleTypeDef *hmmc); /** * @brief */ -#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< High voltage in byte mode */ -#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< Dual voltage in byte mode */ -#define MMC_LOW_VOLTAGE_RANGE 0x80000080U /*!< Low voltage in byte mode */ -#define EMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< High voltage in sector mode */ -#define EMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< Dual voltage in sector mode */ -#define EMMC_LOW_VOLTAGE_RANGE 0xC0000080U /*!< Low voltage in sector mode */ +#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */ +#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */ +#define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */ +#define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */ #define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U /** * @} @@ -639,7 +636,6 @@ HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); -HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout); /** * @} */ @@ -653,7 +649,7 @@ uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); * @} */ -/** @defgroup MMC_Exported_Functions_Group6 Peripheral Abort management +/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management * @{ */ HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); @@ -744,4 +740,6 @@ HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); #endif /* SDIO */ -#endif /* STM32F4xx_HAL_MMC_H */ +#endif /* STM32F1xx_HAL_MMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nand.h similarity index 92% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nand.h index 26f6502..cc5d764 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nand.h @@ -1,39 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_nand.h + * @file stm32f1xx_hal_nand.h * @author MCD Application Team * @brief Header file of NAND HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_NAND_H -#define STM32F4xx_HAL_NAND_H +#ifndef STM32F1xx_HAL_NAND_H +#define STM32F1xx_HAL_NAND_H #ifdef __cplusplus extern "C" { #endif -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) /* Includes ------------------------------------------------------------------*/ -#if defined(FSMC_Bank2_3) -#include "stm32f4xx_ll_fsmc.h" -#else -#include "stm32f4xx_ll_fmc.h" -#endif /* FSMC_Bank2_3 */ +#include "stm32f1xx_ll_fsmc.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -123,9 +120,9 @@ typedef struct __NAND_HandleTypeDef typedef struct #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ { - FMC_NAND_TypeDef *Instance; /*!< Register base address */ + FSMC_NAND_TypeDef *Instance; /*!< Register base address */ - FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ + FSMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ HAL_LockTypeDef Lock; /*!< NAND locking object */ @@ -195,8 +192,8 @@ typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand); */ /* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, - FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FSMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, + FSMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig); @@ -285,12 +282,8 @@ uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); /** @defgroup NAND_Private_Constants NAND Private Constants * @{ */ -#if defined(FMC_Bank2_3) #define NAND_DEVICE1 0x70000000UL #define NAND_DEVICE2 0x80000000UL -#else -#define NAND_DEVICE 0x80000000UL -#endif #define NAND_WRITE_TIMEOUT 0x01000000UL #define CMD_AREA (1UL<<16U) /* A16 = CLE high */ @@ -379,10 +372,12 @@ uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); * @} */ -#endif /* FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ #ifdef __cplusplus } #endif -#endif /* STM32F4xx_HAL_NAND_H */ +#endif /* STM32F1xx_HAL_NAND_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nor.h similarity index 89% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nor.h index cc7f1b5..2a1fa11 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_nor.h @@ -1,39 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_nor.h + * @file stm32f1xx_hal_nor.h * @author MCD Application Team * @brief Header file of NOR HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_NOR_H -#define STM32F4xx_HAL_NOR_H +#ifndef STM32F1xx_HAL_NOR_H +#define STM32F1xx_HAL_NOR_H #ifdef __cplusplus extern "C" { #endif -#if defined(FMC_Bank1) || defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /* Includes ------------------------------------------------------------------*/ -#if defined(FSMC_Bank1) -#include "stm32f4xx_ll_fsmc.h" -#else -#include "stm32f4xx_ll_fmc.h" -#endif /* FMC_Bank1 */ +#include "stm32f1xx_ll_fsmc.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -59,7 +56,7 @@ typedef enum } HAL_NOR_StateTypeDef; /** - * @brief FMC NOR Status typedef + * @brief FSMC NOR Status typedef */ typedef enum { @@ -70,7 +67,7 @@ typedef enum } HAL_NOR_StatusTypeDef; /** - * @brief FMC NOR ID typedef + * @brief FSMC NOR ID typedef */ typedef struct { @@ -87,7 +84,7 @@ typedef struct } NOR_IDTypeDef; /** - * @brief FMC NOR CFI typedef + * @brief FSMC NOR CFI typedef */ typedef struct { @@ -114,11 +111,11 @@ typedef struct #endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ { - FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + FSMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ - FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + FSMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ - FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ + FSMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ HAL_LockTypeDef Lock; /*!< NOR locking object */ @@ -183,8 +180,8 @@ typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor); */ /* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, - FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FSMC_NORSRAM_TimingTypeDef *Timing, + FSMC_NORSRAM_TimingTypeDef *ExtTiming); HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); @@ -321,10 +318,12 @@ HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Addres * @} */ -#endif /* FMC_Bank1 || FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ #ifdef __cplusplus } #endif -#endif /* STM32F4xx_HAL_NOR_H */ +#endif /* STM32F1xx_HAL_NOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pccard.h similarity index 90% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pccard.h index 47fbb26..e35816f 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pccard.h @@ -1,39 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_pccard.h + * @file stm32f1xx_hal_pccard.h * @author MCD Application Team * @brief Header file of PCCARD HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_PCCARD_H -#define STM32F4xx_HAL_PCCARD_H +#ifndef STM32F1xx_HAL_PCCARD_H +#define STM32F1xx_HAL_PCCARD_H #ifdef __cplusplus extern "C" { #endif -#if defined(FMC_Bank4) || defined(FSMC_Bank4) +#if defined(FSMC_BANK4) /* Includes ------------------------------------------------------------------*/ -#if defined(FSMC_Bank4) -#include "stm32f4xx_ll_fsmc.h" -#else -#include "stm32f4xx_ll_fmc.h" -#endif /* FSMC_Bank4 */ +#include "stm32f1xx_ll_fsmc.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -66,7 +63,7 @@ typedef enum } HAL_PCCARD_StatusTypeDef; /** - * @brief FMC_PCCARD handle Structure definition + * @brief FSMC_PCCARD handle Structure definition */ #if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) typedef struct __PCCARD_HandleTypeDef @@ -74,9 +71,9 @@ typedef struct __PCCARD_HandleTypeDef typedef struct #endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ { - FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */ + FSMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */ - FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */ + FSMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */ @@ -140,8 +137,8 @@ typedef void (*pPCCARD_CallbackTypeDef)(PCCARD_HandleTypeDef *hpccard); * @{ */ /* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, - FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming); +HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FSMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, + FSMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FSMC_NAND_PCC_TimingTypeDef *IOSpaceTiming); HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard); void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard); void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard); @@ -276,10 +273,12 @@ HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard); * @} */ -#endif /* FMC_Bank4 || FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ #ifdef __cplusplus } #endif -#endif /* STM32F4xx_HAL_PCCARD_H */ +#endif /* STM32F1xx_HAL_PCCARD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h new file mode 100644 index 0000000..9a613e1 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h @@ -0,0 +1,1065 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_PCD_H +#define STM32F1xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_usb.h" + +#if defined (USB) || defined (USB_OTG_FS) + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +#if defined (USB) + +#endif /* defined (USB) */ +#if defined (USB_OTG_FS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +typedef USB_TypeDef PCD_TypeDef; +typedef USB_CfgTypeDef PCD_InitTypeDef; +typedef USB_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB) */ + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ +#if defined (USB_OTG_FS) + PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) + PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ +#endif /* defined (USB) */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32f1xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#if defined (USB_OTG_FS) +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ + ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) + +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \ + ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + } while(0U) +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR)\ + &= (uint16_t)(~(__INTERRUPT__))) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ + } while(0U) + +#endif /* defined (USB) */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type); + +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + + +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ +#if defined (USB_OTG_FS) +#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +#define USB_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB) */ + +/** + * @} + */ +#if defined (USB) +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define PCD_EP0MPS_64 EP_MPS_64 +#define PCD_EP0MPS_32 EP_MPS_32 +#define PCD_EP0MPS_16 EP_MPS_16 +#define PCD_EP0MPS_08 EP_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ +#define PCD_ENDP0 0U +#define PCD_ENDP1 1U +#define PCD_ENDP2 2U +#define PCD_ENDP3 3U +#define PCD_ENDP4 4U +#define PCD_ENDP5 5U +#define PCD_ENDP6 6U +#define PCD_ENDP7 7U +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0U +#define PCD_DBL_BUF 1U +/** + * @} + */ +#endif /* defined (USB) */ +/** + * @} + */ + +#if defined (USB_OTG_FS) +#ifndef USB_OTG_DOEPINT_OTEPSPR +#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_OTEPSPR */ + +#ifndef USB_OTG_DOEPMSK_OTEPSPRM +#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */ + +#ifndef USB_OTG_DOEPINT_NAK +#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ +#endif /* defined USB_OTG_DOEPINT_NAK */ + +#ifndef USB_OTG_DOEPMSK_NAKM +#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NAKM */ + +#ifndef USB_OTG_DOEPINT_STPKTRX +#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_STPKTRX */ + +#ifndef USB_OTG_DOEPMSK_NYETM +#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NYETM */ +#endif /* defined (USB_OTG_FS) */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#if defined (USB) +/******************** Bit definition for USB_COUNTn_RX register *************/ +#define USB_CNTRX_NBLK_MSK (0x1FU << 10) +#define USB_CNTRX_BLSIZE (0x1U << 15) + +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)\ + (&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue)) + +/* GetENDPOINT */ +#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) + +/* ENDPOINT transfer */ +#define USB_EP0StartXfer USB_EPStartXfer + +/** + * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wType Endpoint Type. + * @retval None + */ +#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum))\ + & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) + + +/** + * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Endpoint Type + */ +#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpNum, bDir + * @retval None + */ +#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT double buffered endpoint */ \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } \ + else if ((bDir) == 1U) \ + { \ + /* IN double buffered endpoint */ \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_TX_STATUS */ + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_EPRX_DTOG1 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPRX_DTOG2 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_RX_STATUS */ + +/** + * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wStaterx new state. + * @param wStatetx new state. + * @retval None + */ +#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \ + /* toggle first bit ? */ \ + if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + /* toggle first bit ? */ \ + if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_TXRX_STATUS */ + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval status + */ +#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) +#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) + +/** + * @brief sets directly the VALID tx/rx-status into the endpoint register + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) +#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) + +/** + * @brief checks stall condition in an endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval TRUE = endpoint in stall condition. + */ +#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) == USB_EP_TX_STALL) +#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) == USB_EP_RX_STALL) + +/** + * @brief set & clear EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_KIND(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \ + } while(0) /* PCD_SET_EP_KIND */ + +#define PCD_CLEAR_EP_KIND(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_CLEAR_EP_KIND */ + +/** + * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \ + } while(0) /* PCD_CLEAR_RX_EP_CTR */ + +#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \ + } while(0) /* PCD_CLEAR_TX_EP_CTR */ + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wEPVal; \ + \ + _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \ + } while(0) /* PCD_RX_DTOG */ + +#define PCD_TX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wEPVal; \ + \ + _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \ + } while(0) /* PCD_TX_DTOG */ +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ + \ + if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\ + { \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) /* PCD_CLEAR_RX_DTOG */ + +#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ + \ + if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\ + { \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) /* PCD_CLEAR_TX_DTOG */ + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_ADDRESS */ + +/** + * @brief Gets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) + +#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE\ + + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) + +#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE\ + + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) + + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wAddr address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \ + do { \ + __IO uint16_t *_wRegVal; \ + uint32_t _wRegBase = (uint32_t)USBx; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ + *_wRegVal = ((wAddr) >> 1) << 1; \ + } while(0) /* PCD_SET_EP_TX_ADDRESS */ + +#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \ + do { \ + __IO uint16_t *_wRegVal; \ + uint32_t _wRegBase = (uint32_t)USBx; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ + *_wRegVal = ((wAddr) >> 1) << 1; \ + } while(0) /* PCD_SET_EP_RX_ADDRESS */ + +/** + * @brief Gets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval address of the buffer. + */ +#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param pdwReg Register pointer + * @param wCount Counter. + * @param wNBlocks no. of Blocks. + * @retval None + */ +#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ + do { \ + (wNBlocks) = (wCount) >> 5; \ + if (((wCount) & 0x1fU) == 0U) \ + { \ + (wNBlocks)--; \ + } \ + *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \ + } while(0) /* PCD_CALC_BLK32 */ + +#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ + do { \ + (wNBlocks) = (wCount) >> 1; \ + if (((wCount) & 0x1U) != 0U) \ + { \ + (wNBlocks)++; \ + } \ + *(pdwReg) = (uint16_t)((wNBlocks) << 10); \ + } while(0) /* PCD_CALC_BLK2 */ + +#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \ + do { \ + uint32_t wNBlocks; \ + if ((wCount) == 0U) \ + { \ + *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \ + *(pdwReg) |= USB_CNTRX_BLSIZE; \ + } \ + else if((wCount) <= 62U) \ + { \ + PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ + } \ + else \ + { \ + PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ + } \ + } while(0) /* PCD_SET_EP_CNT_RX_REG */ + +#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *pdwReg; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ + PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \ + } while(0) + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *_wRegVal; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ + *_wRegVal = (uint16_t)(wCount); \ + } while(0) + +#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *_wRegVal; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ + PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \ + } while(0) + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU) +#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU) + +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr buffer 0 address. + * @retval Counter value + */ +#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \ + do { \ + PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \ + } while(0) /* PCD_SET_EP_DBUF0_ADDR */ + +#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \ + do { \ + PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \ + } while(0) /* PCD_SET_EP_DBUF1_ADDR */ + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \ + do { \ + PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \ + PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \ + } while(0) /* PCD_SET_EP_DBUF_ADDR */ + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + /* OUT endpoint */ \ + { \ + PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \ + } \ + } \ + } while(0) /* SetEPDblBuf0Count*/ + +#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ + uint32_t _wBase = (uint32_t)(USBx); \ + __IO uint16_t *_wEPRegVal; \ + \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + _wBase += (uint32_t)(USBx)->BTABLE; \ + _wEPRegVal = (__IO uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ + *_wEPRegVal = (uint16_t)(wCount); \ + } \ + } \ + } while(0) /* SetEPDblBuf1Count */ + +#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ + PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + } while(0) /* PCD_SET_EP_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) + +#endif /* defined (USB) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h new file mode 100644 index 0000000..4582702 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h @@ -0,0 +1,88 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_PCD_EX_H +#define STM32F1xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +#if defined (USB) || defined (USB_OTG_FS) +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + +#if defined (USB_OTG_FS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress); + +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); +#endif /* defined (USB) */ +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F1xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h similarity index 56% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h index d97f255..9696c00 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h @@ -1,45 +1,47 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_pwr.h + * @file stm32f1xx_hal_pwr.h * @author MCD Application Team * @brief Header file of PWR HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_H -#define __STM32F4xx_HAL_PWR_H +#ifndef __STM32F1xx_HAL_PWR_H +#define __STM32F1xx_HAL_PWR_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @addtogroup PWR * @{ - */ + */ /* Exported types ------------------------------------------------------------*/ /** @defgroup PWR_Exported_Types PWR Exported Types * @{ - */ - + */ + /** * @brief PWR PVD configuration structure definition */ @@ -52,39 +54,47 @@ typedef struct This parameter can be a value of @ref PWR_PVD_Mode */ }PWR_PVDTypeDef; + /** * @} */ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_Exported_Constants PWR Exported Constants + +/* Internal constants --------------------------------------------------------*/ + +/** @addtogroup PWR_Private_Constants * @{ - */ - -/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN1 0x00000100U + */ + +#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ + /** * @} */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + /** @defgroup PWR_PVD_detection_level PWR PVD detection level * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 -#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 -#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 -#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 -#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 -#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 -#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 -#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage - (Compare internally to VREFINT) */ + */ +#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2 +#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3 +#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4 +#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5 +#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6 +#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7 +#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8 +#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9 + /** * @} - */ - + */ + /** @defgroup PWR_PVD_Mode PWR PVD Mode * @{ */ @@ -95,25 +105,38 @@ typedef struct #define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ + /** * @} */ -/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode +/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins + * @{ + */ + +#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP + +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode * @{ */ #define PWR_MAINREGULATOR_ON 0x00000000U #define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS + /** * @} */ - + /** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry * @{ */ #define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) #define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) + /** * @} */ @@ -123,6 +146,7 @@ typedef struct */ #define PWR_STOPENTRY_WFI ((uint8_t)0x01) #define PWR_STOPENTRY_WFE ((uint8_t)0x02) + /** * @} */ @@ -133,93 +157,76 @@ typedef struct #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define PWR_FLAG_PVDO PWR_CSR_PVDO -#define PWR_FLAG_BRR PWR_CSR_BRR -#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY + + /** * @} */ /** * @} - */ - + */ + /* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macro PWR Exported Macro +/** @defgroup PWR_Exported_Macros PWR Exported Macros * @{ */ /** @brief Check PWR flag is set or not. - * @param __FLAG__ specifies the flag to check. + * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm (Alarm A - * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode * For this reason, this bit is equal to 0 after Standby or reset * until the PVDE bit is set. - * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset - * when the device wakes up from Standby mode or by a system reset - * or power reset. - * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage - * scaling output selection is ready. * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) /** @brief Clear the PWR's pending flags. - * @param __FLAG__ specifies the flag to clear. + * @param __FLAG__: specifies the flag to clear. * This parameter can be one of the following values: * @arg PWR_FLAG_WU: Wake Up flag * @arg PWR_FLAG_SB: StandBy flag */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U) +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) /** - * @brief Enable the PVD Exti Line 16. + * @brief Enable interrupt on PVD Exti Line 16. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) /** - * @brief Disable the PVD EXTI Line 16. + * @brief Disable interrupt on PVD Exti Line 16. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) /** * @brief Enable event on PVD Exti Line 16. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) /** * @brief Disable event on PVD Exti Line 16. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) + /** - * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @brief PVD EXTI line configuration: set falling edge trigger. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) /** @@ -229,49 +236,87 @@ typedef struct #define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) +/** + * @brief PVD EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + /** * @brief PVD EXTI line configuration: set rising & falling edge trigger. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\ - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\ - }while(0U) +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); /** * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. * This parameter can be: * @retval None. */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\ - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\ - }while(0U) +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + /** - * @brief checks whether the specified PVD Exti interrupt flag is set or not. + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. * @retval EXTI PVD Line Status. */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) /** - * @brief Clear the PVD Exti flag. + * @brief Clear the PVD EXTI flag. * @retval None. */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) /** - * @brief Generates a Software interrupt on PVD EXTI line. - * @retval None + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) + + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) /** * @} */ -/* Include PWR HAL Extension module */ -#include "stm32f4xx_hal_pwr_ex.h" + /* Exported functions --------------------------------------------------------*/ + /** @addtogroup PWR_Exported_Functions PWR Exported Functions * @{ */ @@ -279,10 +324,12 @@ typedef struct /** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ -/* Initialization and de-initialization functions *****************************/ + +/* Initialization and de-initialization functions *******************************/ void HAL_PWR_DeInit(void); void HAL_PWR_EnableBkUpAccess(void); void HAL_PWR_DisableBkUpAccess(void); + /** * @} */ @@ -290,119 +337,31 @@ void HAL_PWR_DisableBkUpAccess(void); /** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions * @{ */ -/* Peripheral Control functions **********************************************/ -/* PVD configuration */ + +/* Peripheral Control functions ************************************************/ void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +/* #define HAL_PWR_ConfigPVD 12*/ void HAL_PWR_EnablePVD(void); void HAL_PWR_DisablePVD(void); -/* WakeUp pins configuration */ +/* WakeUp pins configuration functions ****************************************/ void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); -/* Low Power modes entry */ +/* Low Power modes configuration functions ************************************/ void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); void HAL_PWR_EnterSTANDBYMode(void); -/* Power PVD IRQ Handler */ -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); - -/* Cortex System Control functions *******************************************/ void HAL_PWR_EnableSleepOnExit(void); void HAL_PWR_DisableSleepOnExit(void); void HAL_PWR_EnableSEVOnPend(void); void HAL_PWR_DisableSEVOnPend(void); -/** - * @} - */ -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWR_Private_Constants PWR Private Constants - * @{ - */ -/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** @defgroup PWR_register_alias_address PWR Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) -#define PWR_CR_OFFSET 0x00U -#define PWR_CSR_OFFSET 0x04U -#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) -#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) -/** - * @} - */ - -/** @defgroup PWR_CR_register_alias PWR CR Register alias address - * @{ - */ -/* --- CR Register ---*/ -/* Alias word address of DBP bit */ -#define DBP_BIT_NUMBER PWR_CR_DBP_Pos -#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U)) - -/* Alias word address of PVDE bit */ -#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos -#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U)) - -/* Alias word address of VOS bit */ -#define VOS_BIT_NUMBER PWR_CR_VOS_Pos -#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U)) -/** - * @} - */ - -/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of EWUP bit */ -#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos -#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U)) -/** - * @} - */ - -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters - * @{ - */ -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_PVDCallback(void); /** * @} */ @@ -413,15 +372,17 @@ void HAL_PWR_DisableSEVOnPend(void); /** * @} - */ + */ /** * @} */ - + #ifdef __cplusplus } #endif -#endif /* __STM32F4xx_HAL_PWR_H */ +#endif /* __STM32F1xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h new file mode 100644 index 0000000..6330c28 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h @@ -0,0 +1,1378 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RCC_H +#define __STM32F1xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< PLLState: The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock + This parameter must be a value of @ref RCCEx_PLL_Multiplication_Factor */ +} RCC_PLLInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ + +#define RCC_PLLSOURCE_HSI_DIV2 0x00000000U /*!< HSI clock divided by 2 selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC /*!< HSE clock selected as PLL entry clock source */ + +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U +#define RCC_OSCILLATORTYPE_HSE 0x00000001U +#define RCC_OSCILLATORTYPE_HSI 0x00000002U +#define RCC_OSCILLATORTYPE_LSE 0x00000004U +#define RCC_OSCILLATORTYPE_LSI 0x00000008U +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */ + +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ + +/** + * @} + */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL is not configured */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK 0x00000000U /*!< No clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV128 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 128 used as RTC clock */ +/** + * @} + */ + + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ + +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U + +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ +#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos)) /*!< Internal High Speed clock ready flag */ +#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos)) /*!< External High Speed clock ready flag */ +#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos)) /*!< PLL clock ready flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos)) /*!< Internal Low Speed oscillator Ready */ +#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos)) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_Pos)) /*!< POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos)) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos)) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos)) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos)) /*!< Low-Power reset flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos)) /*!< External Low Speed oscillator Ready */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) +#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) +#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) +#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_BKP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) + +#define __HAL_RCC_BKP_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_BKPEN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_BKP_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) != RESET) +#define __HAL_RCC_BKP_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_AFIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_AFIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_AFIOEN)) +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPCEN)) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPDEN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) + +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_AFIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) != RESET) +#define __HAL_RCC_AFIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) == RESET) +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) + +#define __HAL_RCC_BKP_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_BKPRST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00) +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) + +#define __HAL_RCC_BKP_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_BKPRST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AFIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_AFIORST)) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPCRST)) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPDRST)) +#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) + +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00) +#define __HAL_RCC_AFIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_AFIORST)) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPCRST)) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPDRST)) +#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) + +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) + +/** + * @} + */ + +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) +#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ + (MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_Pos)) + +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macro to enable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + */ +#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) + +/** @brief Macro to disable the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) + +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if ((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if ((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macro to enable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() (*(__IO uint64_t *) RCC_CR_PLLON_BB = ENABLE) + +/** @brief Macro to disable the main PLL. + * @note The main PLL can not be disabled if it is used as system clock source + */ +#define __HAL_RCC_PLL_DISABLE() (*(__IO uint64_t *) RCC_CR_PLLON_BB = DISABLE) + +/** @brief Macro to configure the main PLL clock source and multiplication factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_MUL4 PLLVCO = PLL clock entry x 4 + * @arg @ref RCC_PLL_MUL6 PLLVCO = PLL clock entry x 6 + @if STM32F105xC + * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5 + @elseif STM32F107xC + * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5 + @else + * @arg @ref RCC_PLL_MUL2 PLLVCO = PLL clock entry x 2 + * @arg @ref RCC_PLL_MUL3 PLLVCO = PLL clock entry x 3 + * @arg @ref RCC_PLL_MUL10 PLLVCO = PLL clock entry x 10 + * @arg @ref RCC_PLL_MUL11 PLLVCO = PLL clock entry x 11 + * @arg @ref RCC_PLL_MUL12 PLLVCO = PLL clock entry x 12 + * @arg @ref RCC_PLL_MUL13 PLLVCO = PLL clock entry x 13 + * @arg @ref RCC_PLL_MUL14 PLLVCO = PLL clock entry x 14 + * @arg @ref RCC_PLL_MUL15 PLLVCO = PLL clock entry x 15 + * @arg @ref RCC_PLL_MUL16 PLLVCO = PLL clock entry x 16 + @endif + * @arg @ref RCC_PLL_MUL8 PLLVCO = PLL clock entry x 8 + * @arg @ref RCC_PLL_MUL9 PLLVCO = PLL clock entry x 9 + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLMUL__)\ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL),((__RCC_PLLSOURCE__) | (__PLLMUL__) )) + +/** @brief Get oscillator clock selected as PLL input clock + * @retval The clock source used for PLL entry. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL input clock + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) + +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS))) + +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +#if defined(RCC_CFGR_MCO_3) +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected by 2 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected (for Ethernet) as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected (for Ethernet) as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#else +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#endif + +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) + + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration +* @{ +*/ + +/** @brief Macro to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macro to enable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) + +/** @brief Macro to disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) + +/** @brief Macro to force the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) + +/** @brief Macros to release the Backup domain reset. + */ +#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + * @arg @ref RCC_IT_CSS Clock Security System interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)RCC_CSR_RMVF_BB = ENABLE) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. + @if STM32F105xx + * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready. + * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready. + @elsif STM32F107xx + * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready. + * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready. + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. + * @arg @ref RCC_FLAG_PINRST Pin reset. + * @arg @ref RCC_FLAG_PORRST POR/PDR reset. + * @arg @ref RCC_FLAG_SFTRST Software reset. + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. + * @arg @ref RCC_FLAG_LPWRRST Low Power reset. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX)? RCC->BDCR : \ + RCC->CSR)) & (1U << ((__FLAG__) & RCC_FLAG_MASK))) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32f1xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); + +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/** @defgroup RCC_Timeout RCC Timeout + * @{ + */ + +/* Disable Backup domain write protection state change timeout */ +#define RCC_DBP_TIMEOUT_VALUE 100U /* 100 ms */ +/* LSE state change timeout */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +#define CLOCKSWITCH_TIMEOUT_VALUE 5000 /* 5 s */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ + +/** + * @} + */ + +/** @defgroup RCC_Register_Offset Register offsets + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +#define RCC_CR_OFFSET 0x00U +#define RCC_CFGR_OFFSET 0x04U +#define RCC_CIR_OFFSET 0x08U +#define RCC_BDCR_OFFSET 0x20U +#define RCC_CSR_OFFSET 0x24U + +/** + * @} + */ + +/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion + * @brief RCC registers bit address in the alias region + * @{ + */ +#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET) +#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET) +#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET) +#define RCC_BDCR_OFFSET_BB (RCC_OFFSET + RCC_BDCR_OFFSET) +#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET) + +/* --- CR Register ---*/ +/* Alias word address of HSION bit */ +#define RCC_HSION_BIT_NUMBER RCC_CR_HSION_Pos +#define RCC_CR_HSION_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSION_BIT_NUMBER * 4U))) +/* Alias word address of HSEON bit */ +#define RCC_HSEON_BIT_NUMBER RCC_CR_HSEON_Pos +#define RCC_CR_HSEON_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSEON_BIT_NUMBER * 4U))) +/* Alias word address of CSSON bit */ +#define RCC_CSSON_BIT_NUMBER RCC_CR_CSSON_Pos +#define RCC_CR_CSSON_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_CSSON_BIT_NUMBER * 4U))) +/* Alias word address of PLLON bit */ +#define RCC_PLLON_BIT_NUMBER RCC_CR_PLLON_Pos +#define RCC_CR_PLLON_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_PLLON_BIT_NUMBER * 4U))) + +/* --- CSR Register ---*/ +/* Alias word address of LSION bit */ +#define RCC_LSION_BIT_NUMBER RCC_CSR_LSION_Pos +#define RCC_CSR_LSION_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_LSION_BIT_NUMBER * 4U))) + +/* Alias word address of RMVF bit */ +#define RCC_RMVF_BIT_NUMBER RCC_CSR_RMVF_Pos +#define RCC_CSR_RMVF_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_RMVF_BIT_NUMBER * 4U))) + +/* --- BDCR Registers ---*/ +/* Alias word address of LSEON bit */ +#define RCC_LSEON_BIT_NUMBER RCC_BDCR_LSEON_Pos +#define RCC_BDCR_LSEON_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEON_BIT_NUMBER * 4U))) + +/* Alias word address of LSEON bit */ +#define RCC_LSEBYP_BIT_NUMBER RCC_BDCR_LSEBYP_Pos +#define RCC_BDCR_LSEBYP_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEBYP_BIT_NUMBER * 4U))) + +/* Alias word address of RTCEN bit */ +#define RCC_RTCEN_BIT_NUMBER RCC_BDCR_RTCEN_Pos +#define RCC_BDCR_RTCEN_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U))) + +/* Alias word address of BDRST bit */ +#define RCC_BDRST_BIT_NUMBER RCC_BDCR_BDRST_Pos +#define RCC_BDCR_BDRST_BB ((uint64_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_BDRST_BIT_NUMBER * 4U))) + +/** + * @} + */ + +/* CR register byte 2 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS ((uint64_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U)) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint64_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U)) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint64_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U)) + +/* Defines used for Flags */ +#define CR_REG_INDEX ((uint8_t)1) +#define BDCR_REG_INDEX ((uint8_t)2) +#define CSR_REG_INDEX ((uint8_t)3) + +#define RCC_FLAG_MASK ((uint8_t)0x1F) + +/** + * @} + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +/** @defgroup RCC_Alias_For_Legacy Alias define maintained for legacy + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __HAL_RCC_SYSCFG_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __HAL_RCC_SYSCFG_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __HAL_RCC_SYSCFG_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +/** + * @} + */ + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI_DIV2) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) +#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU) +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ + (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ + (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \ + (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)) +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) +#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)) +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) +#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1)) +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV128)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h new file mode 100644 index 0000000..822ca9b --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h @@ -0,0 +1,1908 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RCC_EX_H +#define __STM32F1xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/** @addtogroup RCCEx_Private_Constants + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + +/* Alias word address of PLLI2SON bit */ +#define PLLI2SON_BITNUMBER RCC_CR_PLL3ON_Pos +#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (PLLI2SON_BITNUMBER * 4U))) +/* Alias word address of PLL2ON bit */ +#define PLL2ON_BITNUMBER RCC_CR_PLL2ON_Pos +#define RCC_CR_PLL2ON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (PLL2ON_BITNUMBER * 4U))) + +#define PLLI2S_TIMEOUT_VALUE 100U /* 100 ms */ +#define PLL2_TIMEOUT_VALUE 100U /* 100 ms */ + +#endif /* STM32F105xC || STM32F107xC */ + + +#define CR_REG_INDEX ((uint8_t)1) + +/** + * @} + */ + +/** @addtogroup RCCEx_Private_Macros + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_RCC_PREDIV1_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_PREDIV1_SOURCE_HSE) || \ + ((__SOURCE__) == RCC_PREDIV1_SOURCE_PLL2)) +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV3) || ((__DIV__) == RCC_HSE_PREDIV_DIV4) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV5) || ((__DIV__) == RCC_HSE_PREDIV_DIV6) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV7) || ((__DIV__) == RCC_HSE_PREDIV_DIV8) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV9) || ((__DIV__) == RCC_HSE_PREDIV_DIV10) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV11) || ((__DIV__) == RCC_HSE_PREDIV_DIV12) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV13) || ((__DIV__) == RCC_HSE_PREDIV_DIV14) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV15) || ((__DIV__) == RCC_HSE_PREDIV_DIV16)) + +#else +#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2)) +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL6_5)) + +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_PLL2CLK) || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK_DIV2) || ((__SOURCE__) == RCC_MCO1SOURCE_EXT_HSE) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) + +#else +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ + ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ + ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ + ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ + ((__MUL__) == RCC_PLL_MUL16)) + +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) + +#endif /* STM32F105xC || STM32F107xC*/ + +#define IS_RCC_ADCPLLCLK_DIV(__ADCCLK__) (((__ADCCLK__) == RCC_ADCPCLK2_DIV2) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV4) || \ + ((__ADCCLK__) == RCC_ADCPCLK2_DIV6) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV8)) + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLLI2S_VCO)) + +#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S3CLKSOURCE_PLLI2S_VCO)) + +#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV2) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV3)) + +#define IS_RCC_PLLI2S_MUL(__MUL__) (((__MUL__) == RCC_PLLI2S_MUL8) || ((__MUL__) == RCC_PLLI2S_MUL9) || \ + ((__MUL__) == RCC_PLLI2S_MUL10) || ((__MUL__) == RCC_PLLI2S_MUL11) || \ + ((__MUL__) == RCC_PLLI2S_MUL12) || ((__MUL__) == RCC_PLLI2S_MUL13) || \ + ((__MUL__) == RCC_PLLI2S_MUL14) || ((__MUL__) == RCC_PLLI2S_MUL16) || \ + ((__MUL__) == RCC_PLLI2S_MUL20)) + +#define IS_RCC_HSE_PREDIV2(__DIV__) (((__DIV__) == RCC_HSE_PREDIV2_DIV1) || ((__DIV__) == RCC_HSE_PREDIV2_DIV2) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV3) || ((__DIV__) == RCC_HSE_PREDIV2_DIV4) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV5) || ((__DIV__) == RCC_HSE_PREDIV2_DIV6) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV7) || ((__DIV__) == RCC_HSE_PREDIV2_DIV8) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV9) || ((__DIV__) == RCC_HSE_PREDIV2_DIV10) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV11) || ((__DIV__) == RCC_HSE_PREDIV2_DIV12) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV13) || ((__DIV__) == RCC_HSE_PREDIV2_DIV14) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV15) || ((__DIV__) == RCC_HSE_PREDIV2_DIV16)) + +#define IS_RCC_PLL2(__PLL__) (((__PLL__) == RCC_PLL2_NONE) || ((__PLL__) == RCC_PLL2_OFF) || \ + ((__PLL__) == RCC_PLL2_ON)) + +#define IS_RCC_PLL2_MUL(__MUL__) (((__MUL__) == RCC_PLL2_MUL8) || ((__MUL__) == RCC_PLL2_MUL9) || \ + ((__MUL__) == RCC_PLL2_MUL10) || ((__MUL__) == RCC_PLL2_MUL11) || \ + ((__MUL__) == RCC_PLL2_MUL12) || ((__MUL__) == RCC_PLL2_MUL13) || \ + ((__MUL__) == RCC_PLL2_MUL14) || ((__MUL__) == RCC_PLL2_MUL16) || \ + ((__MUL__) == RCC_PLL2_MUL20)) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#elif defined(STM32F103xE) || defined(STM32F103xG) + +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) + +#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + + +#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#else + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC)) + +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + +#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV1_5)) + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** + * @brief RCC PLL2 configuration structure definition + */ +typedef struct +{ + uint32_t PLL2State; /*!< The new state of the PLL2. + This parameter can be a value of @ref RCCEx_PLL2_Config */ + + uint32_t PLL2MUL; /*!< PLL2MUL: Multiplication factor for PLL2 VCO input clock + This parameter must be a value of @ref RCCEx_PLL2_Multiplication_Factor*/ + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value. + This parameter can be a value of @ref RCCEx_Prediv2_Factor */ + +#endif /* STM32F105xC || STM32F107xC */ +} RCC_PLL2InitTypeDef; + +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t Prediv1Source; /*!< The Prediv1 source value. + This parameter can be a value of @ref RCCEx_Prediv1_Source */ +#endif /* STM32F105xC || STM32F107xC */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t HSEPredivValue; /*!< The Prediv1 factor value (named PREDIV1 or PLLXTPRE in RM) + This parameter can be a value of @ref RCCEx_Prediv1_Factor */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + RCC_PLL2InitTypeDef PLL2; /*!< PLL2 structure parameters */ +#endif /* STM32F105xC || STM32F107xC */ +} RCC_OscInitTypeDef; + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** + * @brief RCC PLLI2S configuration structure definition + */ +typedef struct +{ + uint32_t PLLI2SMUL; /*!< PLLI2SMUL: Multiplication factor for PLLI2S VCO input clock + This parameter must be a value of @ref RCCEx_PLLI2S_Multiplication_Factor*/ + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value. + This parameter can be a value of @ref RCCEx_Prediv2_Factor */ + +#endif /* STM32F105xC || STM32F107xC */ +} RCC_PLLI2SInitTypeDef; +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< specifies the RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t AdcClockSelection; /*!< ADC clock source + This parameter can be a value of @ref RCCEx_ADC_Prescaler */ + +#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) + uint32_t I2s2ClockSelection; /*!< I2S2 clock source + This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */ + + uint32_t I2s3ClockSelection; /*!< I2S3 clock source + This parameter can be a value of @ref RCCEx_I2S3_Clock_Source */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters + This parameter will be used only when PLLI2S is selected as Clock Source I2S2 or I2S3 */ + +#endif /* STM32F105xC || STM32F107xC */ +#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Prescaler */ + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +} RCC_PeriphCLKInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_RTC 0x00000001U +#define RCC_PERIPHCLK_ADC 0x00000002U +#if defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_PERIPHCLK_I2S2 0x00000004U +#define RCC_PERIPHCLK_I2S3 0x00000008U +#endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_PERIPHCLK_USB 0x00000010U +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup RCCEx_ADC_Prescaler ADC Prescaler + * @{ + */ +#define RCC_ADCPCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2 +#define RCC_ADCPCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4 +#define RCC_ADCPCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6 +#define RCC_ADCPCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8 + +/** + * @} + */ + +#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +/** @defgroup RCCEx_I2S2_Clock_Source I2S2 Clock Source + * @{ + */ +#define RCC_I2S2CLKSOURCE_SYSCLK 0x00000000U +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_I2S2CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S2SRC +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup RCCEx_I2S3_Clock_Source I2S3 Clock Source + * @{ + */ +#define RCC_I2S3CLKSOURCE_SYSCLK 0x00000000U +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_I2S3CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S3SRC +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + +/** @defgroup RCCEx_USB_Prescaler USB Prescaler + * @{ + */ +#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE +#define RCC_USBCLKSOURCE_PLL_DIV1_5 0x00000000U + +/** + * @} + */ + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_USB_Prescaler USB Prescaler + * @{ + */ +#define RCC_USBCLKSOURCE_PLL_DIV2 RCC_CFGR_OTGFSPRE +#define RCC_USBCLKSOURCE_PLL_DIV3 0x00000000U + +/** + * @} + */ + +/** @defgroup RCCEx_PLLI2S_Multiplication_Factor PLLI2S Multiplication Factor + * @{ + */ + +#define RCC_PLLI2S_MUL8 RCC_CFGR2_PLL3MUL8 /*!< PLLI2S input clock * 8 */ +#define RCC_PLLI2S_MUL9 RCC_CFGR2_PLL3MUL9 /*!< PLLI2S input clock * 9 */ +#define RCC_PLLI2S_MUL10 RCC_CFGR2_PLL3MUL10 /*!< PLLI2S input clock * 10 */ +#define RCC_PLLI2S_MUL11 RCC_CFGR2_PLL3MUL11 /*!< PLLI2S input clock * 11 */ +#define RCC_PLLI2S_MUL12 RCC_CFGR2_PLL3MUL12 /*!< PLLI2S input clock * 12 */ +#define RCC_PLLI2S_MUL13 RCC_CFGR2_PLL3MUL13 /*!< PLLI2S input clock * 13 */ +#define RCC_PLLI2S_MUL14 RCC_CFGR2_PLL3MUL14 /*!< PLLI2S input clock * 14 */ +#define RCC_PLLI2S_MUL16 RCC_CFGR2_PLL3MUL16 /*!< PLLI2S input clock * 16 */ +#define RCC_PLLI2S_MUL20 RCC_CFGR2_PLL3MUL20 /*!< PLLI2S input clock * 20 */ + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Prediv1_Source Prediv1 Source + * @{ + */ + +#define RCC_PREDIV1_SOURCE_HSE RCC_CFGR2_PREDIV1SRC_HSE +#define RCC_PREDIV1_SOURCE_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2 + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_Prediv1_Factor HSE Prediv1 Factor + * @{ + */ + +#define RCC_HSE_PREDIV_DIV1 0x00000000U + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV1_DIV2 +#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV1_DIV3 +#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV1_DIV4 +#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV1_DIV5 +#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV1_DIV6 +#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV1_DIV7 +#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV1_DIV8 +#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV1_DIV9 +#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV1_DIV10 +#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV1_DIV11 +#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV1_DIV12 +#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV1_DIV13 +#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV1_DIV14 +#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV1_DIV15 +#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV1_DIV16 +#else +#define RCC_HSE_PREDIV_DIV2 RCC_CFGR_PLLXTPRE +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Prediv2_Factor HSE Prediv2 Factor + * @{ + */ + +#define RCC_HSE_PREDIV2_DIV1 RCC_CFGR2_PREDIV2_DIV1 /*!< PREDIV2 input clock not divided */ +#define RCC_HSE_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2 /*!< PREDIV2 input clock divided by 2 */ +#define RCC_HSE_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3 /*!< PREDIV2 input clock divided by 3 */ +#define RCC_HSE_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4 /*!< PREDIV2 input clock divided by 4 */ +#define RCC_HSE_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5 /*!< PREDIV2 input clock divided by 5 */ +#define RCC_HSE_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6 /*!< PREDIV2 input clock divided by 6 */ +#define RCC_HSE_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7 /*!< PREDIV2 input clock divided by 7 */ +#define RCC_HSE_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8 /*!< PREDIV2 input clock divided by 8 */ +#define RCC_HSE_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9 /*!< PREDIV2 input clock divided by 9 */ +#define RCC_HSE_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10 /*!< PREDIV2 input clock divided by 10 */ +#define RCC_HSE_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11 /*!< PREDIV2 input clock divided by 11 */ +#define RCC_HSE_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12 /*!< PREDIV2 input clock divided by 12 */ +#define RCC_HSE_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13 /*!< PREDIV2 input clock divided by 13 */ +#define RCC_HSE_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14 /*!< PREDIV2 input clock divided by 14 */ +#define RCC_HSE_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15 /*!< PREDIV2 input clock divided by 15 */ +#define RCC_HSE_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16 /*!< PREDIV2 input clock divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCCEx_PLL2_Config PLL Config + * @{ + */ +#define RCC_PLL2_NONE 0x00000000U +#define RCC_PLL2_OFF 0x00000001U +#define RCC_PLL2_ON 0x00000002U + +/** + * @} + */ + +/** @defgroup RCCEx_PLL2_Multiplication_Factor PLL2 Multiplication Factor + * @{ + */ + +#define RCC_PLL2_MUL8 RCC_CFGR2_PLL2MUL8 /*!< PLL2 input clock * 8 */ +#define RCC_PLL2_MUL9 RCC_CFGR2_PLL2MUL9 /*!< PLL2 input clock * 9 */ +#define RCC_PLL2_MUL10 RCC_CFGR2_PLL2MUL10 /*!< PLL2 input clock * 10 */ +#define RCC_PLL2_MUL11 RCC_CFGR2_PLL2MUL11 /*!< PLL2 input clock * 11 */ +#define RCC_PLL2_MUL12 RCC_CFGR2_PLL2MUL12 /*!< PLL2 input clock * 12 */ +#define RCC_PLL2_MUL13 RCC_CFGR2_PLL2MUL13 /*!< PLL2 input clock * 13 */ +#define RCC_PLL2_MUL14 RCC_CFGR2_PLL2MUL14 /*!< PLL2 input clock * 14 */ +#define RCC_PLL2_MUL16 RCC_CFGR2_PLL2MUL16 /*!< PLL2 input clock * 16 */ +#define RCC_PLL2_MUL20 RCC_CFGR2_PLL2MUL20 /*!< PLL2 input clock * 20 */ + +/** + * @} + */ + +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_PLL_Multiplication_Factor PLL Multiplication Factor + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#else +#define RCC_PLL_MUL2 RCC_CFGR_PLLMULL2 +#define RCC_PLL_MUL3 RCC_CFGR_PLLMULL3 +#endif /* STM32F105xC || STM32F107xC */ +#define RCC_PLL_MUL4 RCC_CFGR_PLLMULL4 +#define RCC_PLL_MUL5 RCC_CFGR_PLLMULL5 +#define RCC_PLL_MUL6 RCC_CFGR_PLLMULL6 +#define RCC_PLL_MUL7 RCC_CFGR_PLLMULL7 +#define RCC_PLL_MUL8 RCC_CFGR_PLLMULL8 +#define RCC_PLL_MUL9 RCC_CFGR_PLLMULL9 +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_PLL_MUL6_5 RCC_CFGR_PLLMULL6_5 +#else +#define RCC_PLL_MUL10 RCC_CFGR_PLLMULL10 +#define RCC_PLL_MUL11 RCC_CFGR_PLLMULL11 +#define RCC_PLL_MUL12 RCC_CFGR_PLLMULL12 +#define RCC_PLL_MUL13 RCC_CFGR_PLLMULL13 +#define RCC_PLL_MUL14 RCC_CFGR_PLLMULL14 +#define RCC_PLL_MUL15 RCC_CFGR_PLLMULL15 +#define RCC_PLL_MUL16 RCC_CFGR_PLLMULL16 +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup RCCEx_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK ((uint32_t)RCC_CFGR_MCO_NOCLOCK) +#define RCC_MCO1SOURCE_SYSCLK ((uint32_t)RCC_CFGR_MCO_SYSCLK) +#define RCC_MCO1SOURCE_HSI ((uint32_t)RCC_CFGR_MCO_HSI) +#define RCC_MCO1SOURCE_HSE ((uint32_t)RCC_CFGR_MCO_HSE) +#define RCC_MCO1SOURCE_PLLCLK ((uint32_t)RCC_CFGR_MCO_PLLCLK_DIV2) +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_MCO1SOURCE_PLL2CLK ((uint32_t)RCC_CFGR_MCO_PLL2CLK) +#define RCC_MCO1SOURCE_PLL3CLK_DIV2 ((uint32_t)RCC_CFGR_MCO_PLL3CLK_DIV2) +#define RCC_MCO1SOURCE_EXT_HSE ((uint32_t)RCC_CFGR_MCO_EXT_HSE) +#define RCC_MCO1SOURCE_PLL3CLK ((uint32_t)RCC_CFGR_MCO_PLL3CLK) +#endif /* STM32F105xC || STM32F107xC*/ +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Interrupt RCCEx Interrupt + * @{ + */ +#define RCC_IT_PLL2RDY ((uint8_t)RCC_CIR_PLL2RDYF) +#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF) +/** + * @} + */ + +/** @defgroup RCCEx_Flag RCCEx Flag + * Elements values convention: 0XXYYYYYb + * - YYYYY : Flag position in the register + * - XX : Register index + * - 01: CR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_PLL2RDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLL2RDY_Pos)) +#define RCC_FLAG_PLLI2SRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLL3RDY_Pos)) +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC*/ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\ + || defined (STM32F100xE) +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined (STM32F100xE) +#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */ + +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SDIOEN)) +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_OTGFSEN)) +#endif /* STM32F105xC || STM32F107xC*/ + +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACEN)) +#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACTXEN)) +#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACRXEN)) + +/** + * @brief Enable ETHERNET clock. + */ +#define __HAL_RCC_ETH_CLK_ENABLE() do { \ + __HAL_RCC_ETHMAC_CLK_ENABLE(); \ + __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ + __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ + } while(0U) +/** + * @brief Disable ETHERNET clock. + */ +#define __HAL_RCC_ETH_CLK_DISABLE() do { \ + __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ + __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ + __HAL_RCC_ETHMAC_CLK_DISABLE(); \ + } while(0U) + +#endif /* STM32F107xC*/ + +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\ + || defined (STM32F100xE) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */ +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined (STM32F100xE) +#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET) +#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */ +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) != RESET) +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) == RESET) +#endif /* STM32F103xE || STM32F103xG */ +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) == RESET) +#endif /* STM32F105xC || STM32F107xC*/ +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) != RESET) +#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) == RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) != RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) == RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) != RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) == RESET) +#endif /* STM32F107xC*/ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) +#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ + || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) +#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN)) +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined (STM32F100xE) +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) +#endif /* STM32F100xB || STM32F100xE */ + +#ifdef STM32F100xE +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#endif /* STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#endif /* STM32F101xG || STM32F103xG*/ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) +#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ + || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) +#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET) +#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET) +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ +#if defined(STM32F100xB) || defined (STM32F100xE) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) +#endif /* STM32F100xB || STM32F100xE */ +#ifdef STM32F100xE +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) +#endif /* STM32F100xE */ +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#endif /* STM32F105xC || STM32F107xC */ +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#endif /* STM32F101xG || STM32F103xG*/ + +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ + || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ + || defined(STM32F103xG) +#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) +#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xB) || defined(STM32F100xE) +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN)) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) +#endif /* STM32F100xB || STM32F100xE */ + +#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ + || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ + || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPEEN)) +#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ + +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xE) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN)) +#endif /* STM32F100xE */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) +#endif /* STM32F101xG || STM32F103xG */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ + || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ + || defined(STM32F103xG) +#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) +#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) +#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ +#if defined(STM32F100xB) || defined(STM32F100xE) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) +#endif /* STM32F100xB || STM32F100xE */ +#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ + || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ + || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) == RESET) +#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) +#endif /* STM32F103xE || STM32F103xG */ +#if defined(STM32F100xE) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET) +#endif /* STM32F100xE */ +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) +#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) +#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) +#endif /* STM32F101xG || STM32F103xG */ + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Peripheral_Clock_Force_Release Peripheral Clock Force Release + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_OTGFSRST)) +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ETHMACRST)) +#endif /* STM32F107xC */ + +#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_OTGFSRST)) +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ETHMACRST)) +#endif /* STM32F107xC */ + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) + +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) +#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ + || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) + +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) +#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST)) +#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST)) +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) + +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined (STM32F100xE) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) + +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) +#endif /* STM32F100xB || STM32F100xE */ + +#if defined (STM32F100xE) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) + +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#endif /* STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) + +#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) + +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#endif /* STM32F101xG || STM32F103xG */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ + +#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ + || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ + || defined(STM32F103xG) +#define __HAL_RCC_ADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC2RST)) + +#define __HAL_RCC_ADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC2RST)) +#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xB) || defined(STM32F100xE) +#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST)) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) + +#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST)) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) +#endif /* STM32F100xB || STM32F100xE */ + +#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ + || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ + || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPERST)) + +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPERST)) +#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST)) + +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ + +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC3RST)) + +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC3RST)) +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xE) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST)) + +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST)) +#endif /* STM32F100xE */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) + +#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) +#endif /* STM32F101xG || STM32F103xG*/ + +/** + * @} + */ + +/** @defgroup RCCEx_HSE_Configuration HSE Configuration + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (uint32_t)(__HSE_PREDIV_VALUE__)) +#else +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV2. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ + MODIFY_REG(RCC->CFGR,RCC_CFGR_PLLXTPRE, (uint32_t)(__HSE_PREDIV_VALUE__)) + +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +/** + * @brief Macro to get prediv1 factor for PLL. + */ +#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1) + +#else +/** + * @brief Macro to get prediv1 factor for PLL. + */ +#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE) + +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_PLLI2S_Configuration PLLI2S Configuration + * @{ + */ + +/** @brief Macros to enable the main PLLI2S. + * @note After enabling the main PLLI2S, the application software should wait on + * PLLI2SRDY flag to be set indicating that PLLI2S clock is stable and can + * be used as system clock source. + * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) + +/** @brief Macros to disable the main PLLI2S. + * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) + +/** @brief macros to configure the main PLLI2S multiplication factor. + * @note This function must be used only when the main PLLI2S is disabled. + * + * @param __PLLI2SMUL__ specifies the multiplication factor for PLLI2S VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLLI2S_MUL8 PLLI2SVCO = PLLI2S clock entry x 8 + * @arg @ref RCC_PLLI2S_MUL9 PLLI2SVCO = PLLI2S clock entry x 9 + * @arg @ref RCC_PLLI2S_MUL10 PLLI2SVCO = PLLI2S clock entry x 10 + * @arg @ref RCC_PLLI2S_MUL11 PLLI2SVCO = PLLI2S clock entry x 11 + * @arg @ref RCC_PLLI2S_MUL12 PLLI2SVCO = PLLI2S clock entry x 12 + * @arg @ref RCC_PLLI2S_MUL13 PLLI2SVCO = PLLI2S clock entry x 13 + * @arg @ref RCC_PLLI2S_MUL14 PLLI2SVCO = PLLI2S clock entry x 14 + * @arg @ref RCC_PLLI2S_MUL16 PLLI2SVCO = PLLI2S clock entry x 16 + * @arg @ref RCC_PLLI2S_MUL20 PLLI2SVCO = PLLI2S clock entry x 20 + * + */ +#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SMUL__)\ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL3MUL,(__PLLI2SMUL__)) + +/** + * @} + */ + +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_Peripheral_Configuration Peripheral Configuration + * @brief Macros to configure clock source of different peripherals. + * @{ + */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +/** @brief Macro to configure the USB clock. + * @param __USBCLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock + */ +#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSOURCE__)) + +/** @brief Macro to get the USB clock (USBCLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE))) + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + +/** @brief Macro to configure the USB OTSclock. + * @param __USBCLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock + */ +#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, (uint32_t)(__USBCLKSOURCE__)) + +/** @brief Macro to get the USB clock (USBCLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_OTGFSPRE))) + +#endif /* STM32F105xC || STM32F107xC */ + +/** @brief Macro to configure the ADCx clock (x=1 to 3 depending on devices). + * @param __ADCCLKSOURCE__ specifies the ADC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADCCLKSOURCE__)) + +/** @brief Macro to get the ADC clock (ADCxCLK, x=1 to 3 depending on devices). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE))) + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + +/** @addtogroup RCCEx_HSE_Configuration + * @{ + */ + +/** + * @brief Macro to configure the PLL2 & PLLI2S Predivision factor. + * @note Predivision factor can not be changed if PLL2 is used indirectly as system clock + * In this case, you have to select another source of the system clock, disable the PLL2 and PLLI2S and + * then change the PREDIV2 factor. + * @param __HSE_PREDIV2_VALUE__ specifies the PREDIV2 value applied to PLL2 & PLLI2S. + * This parameter must be a number between RCC_HSE_PREDIV2_DIV1 and RCC_HSE_PREDIV2_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV2_CONFIG(__HSE_PREDIV2_VALUE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2, (uint32_t)(__HSE_PREDIV2_VALUE__)) + +/** + * @brief Macro to get prediv2 factor for PLL2 & PLL3. + */ +#define __HAL_RCC_HSE_GET_PREDIV2() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV2) + +/** + * @} + */ + +/** @addtogroup RCCEx_PLLI2S_Configuration + * @{ + */ + +/** @brief Macros to enable the main PLL2. + * @note After enabling the main PLL2, the application software should wait on + * PLL2RDY flag to be set indicating that PLL2 clock is stable and can + * be used as system clock source. + * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = ENABLE) + +/** @brief Macros to disable the main PLL2. + * @note The main PLL2 can not be disabled if it is used indirectly as system clock source + * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = DISABLE) + +/** @brief macros to configure the main PLL2 multiplication factor. + * @note This function must be used only when the main PLL2 is disabled. + * + * @param __PLL2MUL__ specifies the multiplication factor for PLL2 VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLL2_MUL8 PLL2VCO = PLL2 clock entry x 8 + * @arg @ref RCC_PLL2_MUL9 PLL2VCO = PLL2 clock entry x 9 + * @arg @ref RCC_PLL2_MUL10 PLL2VCO = PLL2 clock entry x 10 + * @arg @ref RCC_PLL2_MUL11 PLL2VCO = PLL2 clock entry x 11 + * @arg @ref RCC_PLL2_MUL12 PLL2VCO = PLL2 clock entry x 12 + * @arg @ref RCC_PLL2_MUL13 PLL2VCO = PLL2 clock entry x 13 + * @arg @ref RCC_PLL2_MUL14 PLL2VCO = PLL2 clock entry x 14 + * @arg @ref RCC_PLL2_MUL16 PLL2VCO = PLL2 clock entry x 16 + * @arg @ref RCC_PLL2_MUL20 PLL2VCO = PLL2 clock entry x 20 + * + */ +#define __HAL_RCC_PLL2_CONFIG(__PLL2MUL__)\ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL2MUL,(__PLL2MUL__)) + +/** + * @} + */ + +/** @defgroup RCCEx_I2S_Configuration I2S Configuration + * @brief Macros to configure clock source of I2S peripherals. + * @{ + */ + +/** @brief Macro to configure the I2S2 clock. + * @param __I2S2CLKSOURCE__ specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_I2S2_CONFIG(__I2S2CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S2SRC, (uint32_t)(__I2S2CLKSOURCE__)) + +/** @brief Macro to get the I2S2 clock (I2S2CLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S2SRC))) + +/** @brief Macro to configure the I2S3 clock. + * @param __I2S2CLKSOURCE__ specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_I2S3_CONFIG(__I2S2CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S3SRC, (uint32_t)(__I2S2CLKSOURCE__)) + +/** @brief Macro to get the I2S3 clock (I2S3CLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_GET_I2S3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S3SRC))) + +/** + * @} + */ + +#endif /* STM32F105xC || STM32F107xC */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init); +HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void); + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h new file mode 100644 index 0000000..5e4f5ab --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h @@ -0,0 +1,607 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rtc.h + * @author MCD Application Team + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RTC_H +#define __STM32F1xx_HAL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/** @addtogroup RTC_Private_Macros + * @{ + */ + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) (((PREDIV) <= 0xFFFFFU) || ((PREDIV) == RTC_AUTO_1_SECOND)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U) +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U) +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U)) +#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U)) +#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A) +#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUTSOURCE_NONE) || \ + ((__OUTPUT__) == RTC_OUTPUTSOURCE_CALIBCLOCK) || \ + ((__OUTPUT__) == RTC_OUTPUTSOURCE_ALARM) || \ + ((__OUTPUT__) == RTC_OUTPUTSOURCE_SECOND)) + + +/** + * @} + */ + +/** @addtogroup RTC_Private_Constants + * @{ + */ +/** @defgroup RTC_Timeout_Value Default Timeout Value + * @{ + */ +#define RTC_TIMEOUT_VALUE 1000U +/** + * @} + */ + +/** @defgroup RTC_EXTI_Line_Event RTC EXTI Line event + * @{ + */ +#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +/** + * @} + */ + + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + +} RTC_TimeTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t Alarm; /*!< Specifies the alarm ID (only 1 alarm ID for STM32F1). + This parameter can be a value of @ref RTC_Alarms_Definitions */ +} RTC_AlarmTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ + +} HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF or RTC_AUTO_1_SECOND + If RTC_AUTO_1_SECOND is selected, AsynchPrediv will be set automatically to get 1sec timebase */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC Tamper pin. + This parameter can be a value of @ref RTC_output_source_to_output_on_the_Tamper_pin */ + +} RTC_InitTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay (not necessary for HAL_RTC_SetDate). + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +} RTC_DateTypeDef; + +/** + * @brief Time Handle Structure definition + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +typedef struct __RTC_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + RTC_DateTypeDef DateToUpdate; /*!< Current date set by user and updated automatically */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */ + + void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */ + + void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */ + + void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */ + +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + +} RTC_HandleTypeDef; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RTC Callback ID enumeration definition + */ +typedef enum +{ + HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00u, /*!< RTC Alarm A Event Callback ID */ + HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04u, /*!< RTC Tamper 1 Callback ID */ + HAL_RTC_MSPINIT_CB_ID = 0x0Eu, /*!< RTC Msp Init callback ID */ + HAL_RTC_MSPDEINIT_CB_ID = 0x0Fu /*!< RTC Msp DeInit callback ID */ +} HAL_RTC_CallbackIDTypeDef; + +/** + * @brief HAL RTC Callback pointer definition + */ +typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */ +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Automatic_Prediv_1_Second Automatic calculation of prediv for 1sec timebase + * @{ + */ +#define RTC_AUTO_1_SECOND 0xFFFFFFFFU + +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions Input Parameter Format + * @{ + */ +#define RTC_FORMAT_BIN 0x000000000U +#define RTC_FORMAT_BCD 0x000000001U + +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions Month Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02) +#define RTC_MONTH_MARCH ((uint8_t)0x03) +#define RTC_MONTH_APRIL ((uint8_t)0x04) +#define RTC_MONTH_MAY ((uint8_t)0x05) +#define RTC_MONTH_JUNE ((uint8_t)0x06) +#define RTC_MONTH_JULY ((uint8_t)0x07) +#define RTC_MONTH_AUGUST ((uint8_t)0x08) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x00) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions Alarms Definitions + * @{ + */ +#define RTC_ALARM_A 0U /*!< Specify alarm ID (mainly for legacy purposes) */ + +/** + * @} + */ + + +/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin Output source to output on the Tamper pin + * @{ + */ + +#define RTC_OUTPUTSOURCE_NONE 0x00000000U /*!< No output on the TAMPER pin */ +#define RTC_OUTPUTSOURCE_CALIBCLOCK BKP_RTCCR_CCO /*!< RTC clock with a frequency divided by 64 on the TAMPER pin */ +#define RTC_OUTPUTSOURCE_ALARM BKP_RTCCR_ASOE /*!< Alarm pulse signal on the TAMPER pin */ +#define RTC_OUTPUTSOURCE_SECOND (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE) /*!< Second pulse signal on the TAMPER pin */ + +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions Interrupts Definitions + * @{ + */ +#define RTC_IT_OW RTC_CRH_OWIE /*!< Overflow interrupt */ +#define RTC_IT_ALRA RTC_CRH_ALRIE /*!< Alarm interrupt */ +#define RTC_IT_SEC RTC_CRH_SECIE /*!< Second interrupt */ +#define RTC_IT_TAMP1 BKP_CSR_TPIE /*!< TAMPER Pin interrupt enable */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions Flags Definitions + * @{ + */ +#define RTC_FLAG_RTOFF RTC_CRL_RTOFF /*!< RTC Operation OFF flag */ +#define RTC_FLAG_RSF RTC_CRL_RSF /*!< Registers Synchronized flag */ +#define RTC_FLAG_OW RTC_CRL_OWF /*!< Overflow flag */ +#define RTC_FLAG_ALRAF RTC_CRL_ALRF /*!< Alarm flag */ +#define RTC_FLAG_SEC RTC_CRL_SECF /*!< Second flag */ +#define RTC_FLAG_TAMP1F BKP_CSR_TEF /*!< Tamper Interrupt Flag */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__: RTC handle. + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_RTC_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0u) +#else +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be checked + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Alarm's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @retval None + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CRL) & (__INTERRUPT__)) != RESET)? SET : RESET) + +/** + * @brief Clear the RTC Alarm's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) &= ~(__FLAG__) + +/** + * @brief Enable interrupt on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable interrupt on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Enable event on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable event on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT) + + +/** + * @brief ALARM EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT) + + +/** + * @brief Disable the ALARM Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT) + + +/** + * @brief ALARM EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable the ALARM Extended Interrupt Rising Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief ALARM EXTI line configuration: set rising & falling edge trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do{ \ + __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the ALARM Extended Interrupt Rising & Falling Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do{ \ + __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Check whether the specified ALARM EXTI interrupt flag is set or not. + * @retval EXTI ALARM Line Status. + */ +#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & (RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Clear the ALARM EXTI flag. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = (RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, RTC_EXTI_LINE_ALARM_EVENT) +/** + * @} + */ + +/* Include RTC HAL Extension module */ +#include "stm32f1xx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_Exported_Functions + * @{ + */ + + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup RTC_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* RTC Time and Date functions ************************************************/ +/** @addtogroup RTC_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +/** + * @} + */ + +/* RTC Alarm functions ********************************************************/ +/** @addtogroup RTC_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup RTC_Exported_Functions_Group4 + * @{ + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup RTC_Exported_Functions_Group5 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h new file mode 100644 index 0000000..7c285ce --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h @@ -0,0 +1,412 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rtc_ex.h + * @author MCD Application Team + * @brief Header file of RTC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RTC_EX_H +#define __STM32F1xx_HAL_RTC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @{ + */ + +/** @addtogroup RTCEx_Private_Macros + * @{ + */ + +/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy + * @{ + */ +#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler + +/** + * @} + */ + +/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters + * @{ + */ +#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1) + +#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) + +#if RTC_BKP_NUMBER > 10U +#define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t)RTC_BKP_DR10) || (((BKP) >= (uint32_t)RTC_BKP_DR11) && ((BKP) <= (uint32_t)RTC_BKP_DR42))) +#else +#define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t)RTC_BKP_NUMBER) +#endif +#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007FU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ +/** + * @brief RTC Tamper structure definition + */ +typedef struct +{ + uint32_t Tamper; /*!< Specifies the Tamper Pin. + This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ + + uint32_t Trigger; /*!< Specifies the Tamper Trigger. + This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ + +} RTC_TamperTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions + * @{ + */ +#define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */ + +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions + * @{ + */ +#define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */ +#define RTC_TAMPERTRIGGER_HIGHLEVEL 0x00000000U /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */ + +/** + * @} + */ + +/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions + * @{ + */ +#if RTC_BKP_NUMBER > 0U +#define RTC_BKP_DR1 0x00000001U +#define RTC_BKP_DR2 0x00000002U +#define RTC_BKP_DR3 0x00000003U +#define RTC_BKP_DR4 0x00000004U +#define RTC_BKP_DR5 0x00000005U +#define RTC_BKP_DR6 0x00000006U +#define RTC_BKP_DR7 0x00000007U +#define RTC_BKP_DR8 0x00000008U +#define RTC_BKP_DR9 0x00000009U +#define RTC_BKP_DR10 0x0000000AU +#endif /* RTC_BKP_NUMBER > 0 */ + +#if RTC_BKP_NUMBER > 10U +#define RTC_BKP_DR11 0x00000010U +#define RTC_BKP_DR12 0x00000011U +#define RTC_BKP_DR13 0x00000012U +#define RTC_BKP_DR14 0x00000013U +#define RTC_BKP_DR15 0x00000014U +#define RTC_BKP_DR16 0x00000015U +#define RTC_BKP_DR17 0x00000016U +#define RTC_BKP_DR18 0x00000017U +#define RTC_BKP_DR19 0x00000018U +#define RTC_BKP_DR20 0x00000019U +#define RTC_BKP_DR21 0x0000001AU +#define RTC_BKP_DR22 0x0000001BU +#define RTC_BKP_DR23 0x0000001CU +#define RTC_BKP_DR24 0x0000001DU +#define RTC_BKP_DR25 0x0000001EU +#define RTC_BKP_DR26 0x0000001FU +#define RTC_BKP_DR27 0x00000020U +#define RTC_BKP_DR28 0x00000021U +#define RTC_BKP_DR29 0x00000022U +#define RTC_BKP_DR30 0x00000023U +#define RTC_BKP_DR31 0x00000024U +#define RTC_BKP_DR32 0x00000025U +#define RTC_BKP_DR33 0x00000026U +#define RTC_BKP_DR34 0x00000027U +#define RTC_BKP_DR35 0x00000028U +#define RTC_BKP_DR36 0x00000029U +#define RTC_BKP_DR37 0x0000002AU +#define RTC_BKP_DR38 0x0000002BU +#define RTC_BKP_DR39 0x0000002CU +#define RTC_BKP_DR40 0x0000002DU +#define RTC_BKP_DR41 0x0000002EU +#define RTC_BKP_DR42 0x0000002FU +#endif /* RTC_BKP_NUMBER > 10 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/** + * @brief Enable the RTC Tamper interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP1: Tamper A interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__)) + +/** + * @brief Disable the RTC Tamper interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP1: Tamper A interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked. + * This parameter can be: + * @arg RTC_IT_TAMP1 + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Tamper's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_TAMP1F + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Tamper's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked. + * This parameter can be: + * @arg RTC_IT_TAMP1 + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET) + +/** + * @brief Clear the RTC Tamper's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_TAMP1F + * @retval None + */ +#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI) + +/** + * @brief Enable the RTC Second interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled + * This parameter can be any combination of the following values: + * @arg RTC_IT_SEC: Second A interrupt + * @retval None + */ +#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Disable the RTC Second interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_SEC: Second A interrupt + * @retval None + */ +#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Second interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_SEC: Second A interrupt + * @retval None + */ +#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Second's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_SEC + * @retval None + */ +#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Clear the RTC Second's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_SEC + * @retval None + */ +#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) &= ~(__FLAG__) + +/** + * @brief Enable the RTC Overflow interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow A interrupt + * @retval None + */ +#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Disable the RTC Overflow interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow A interrupt + * @retval None + */ +#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Overflow interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_OW: Overflow A interrupt + * @retval None + */ +#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Overflow's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_OW + * @retval None + */ +#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Clear the RTC Overflow's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_OW + * @retval None + */ +#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTCEx_Exported_Functions + * @{ + */ + +/* RTC Tamper functions *****************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); + +/** + * @} + */ + +/* RTC Second functions *****************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc); + +/** + * @} + */ + +/* Extension Control functions ************************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group3 + * @{ + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); + +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RTC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sd.h similarity index 98% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sd.h index 73fc7de..bdf6007 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sd.h @@ -1,24 +1,25 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_sd.h + * @file stm32f1xx_hal_sd.h * @author MCD Application Team * @brief Header file of SD HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_SD_H -#define STM32F4xx_HAL_SD_H +#ifndef STM32F1xx_HAL_SD_H +#define STM32F1xx_HAL_SD_H #ifdef __cplusplus extern "C" { @@ -27,9 +28,9 @@ #if defined(SDIO) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_sdmmc.h" +#include "stm32f1xx_ll_sdmmc.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -755,4 +756,6 @@ HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); #endif -#endif /* STM32F4xx_HAL_SD_H */ +#endif /* STM32F1xx_HAL_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_smartcard.h similarity index 96% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_smartcard.h index 135f402..9fe82b8 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_smartcard.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_smartcard.h + * @file stm32f1xx_hal_smartcard.h * @author MCD Application Team * @brief Header file of SMARTCARD HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SMARTCARD_H -#define __STM32F4xx_HAL_SMARTCARD_H +#ifndef __STM32F1xx_HAL_SMARTCARD_H +#define __STM32F1xx_HAL_SMARTCARD_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -156,7 +157,7 @@ typedef struct __SMARTCARD_HandleTypeDef SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ - const uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ @@ -565,18 +566,6 @@ typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsc); /*!< */ #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) -/** @brief Macro to enable the SMARTCARD's one bit sample method - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Macro to disable the SMARTCARD's one bit sample method - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) - /** @brief Enable the USART associated to the SMARTCARD Handle * @param __HANDLE__ specifies the SMARTCARD Handle. * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). @@ -642,11 +631,11 @@ HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, * @{ */ /* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); /* Transfer Abort functions */ HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsc); @@ -715,9 +704,9 @@ uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) #define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ ((NACK) == SMARTCARD_NACK_DISABLE)) -#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U) +#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 4500001U) -#define SMARTCARD_DIV(__PCLK__, __BAUD__) ((uint32_t)((((uint64_t)(__PCLK__))*25U)/(4U*((uint64_t)(__BAUD__))))) +#define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25U)/(4U*(__BAUD__))) #define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100U) #define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) ((((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100U)) * 16U) + 50U) / 100U) /* SMARTCARD BRR = mantissa + overflow + fraction @@ -751,5 +740,6 @@ uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); } #endif -#endif /* __STM32F4xx_HAL_SMARTCARD_H */ +#endif /* __STM32F1xx_HAL_SMARTCARD_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h index d7997a3..271bd3a 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_spi.h + * @file stm32f1xx_hal_spi.h * @author MCD Application Team * @brief Header file of SPI HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_SPI_H -#define STM32F4xx_HAL_SPI_H +#ifndef STM32F1xx_HAL_SPI_H +#define STM32F1xx_HAL_SPI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -189,7 +190,6 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to #define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ #define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ #define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ -#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ #define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ #define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY Flag */ #define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ @@ -284,7 +284,6 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to * @{ */ #define SPI_TIMODE_DISABLE (0x00000000U) -#define SPI_TIMODE_ENABLE SPI_CR2_FRF /** * @} */ @@ -317,9 +316,8 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to #define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ #define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ #define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ -#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ -#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ - | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE) +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY\ + | SPI_SR_CRCERR | SPI_SR_MODF | SPI_SR_OVR) /** * @} */ @@ -396,7 +394,6 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to * @arg SPI_FLAG_MODF: Mode fault flag * @arg SPI_FLAG_OVR: Overrun flag * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) @@ -434,18 +431,6 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to UNUSED(tmpreg_ovr); \ } while(0U) -/** @brief Clear the SPI FRE pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_fre = 0x00U; \ - tmpreg_fre = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_fre); \ - }while(0U) - /** @brief Enable the SPI peripheral. * @param __HANDLE__ specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. @@ -460,6 +445,16 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to */ #define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_INVALID_CRC_ERROR 0U /* CRC error wrongly detected */ +#define SPI_VALID_CRC_ERROR 1U /* CRC error is true */ /** * @} */ @@ -501,7 +496,6 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to * @arg SPI_FLAG_MODF: Mode fault flag * @arg SPI_FLAG_OVR: Overrun flag * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag * @retval SET or RESET. */ #define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ @@ -604,13 +598,12 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to #define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ ((__BIT__) == SPI_FIRSTBIT_LSB)) -/** @brief Checks if SPI TI mode parameter is in allowed range. - * @param __MODE__ specifies the SPI TI mode. +/** @brief Checks if SPI TI mode parameter is disabled. + * @param __MODE__ SPI_TIMODE_DISABLE. Device not support Ti Mode. * This parameter can be a value of @ref SPI_TI_mode * @retval None */ -#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ - ((__MODE__) == SPI_TIMODE_ENABLE)) +#define IS_SPI_TIMODE(__MODE__) ((__MODE__) == SPI_TIMODE_DISABLE) /** @brief Checks if SPI CRC calculation enabled state is in allowed range. * @param __CALCULATION__ specifies the SPI CRC calculation enable state. @@ -635,6 +628,15 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to */ #define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +uint8_t SPI_ISCRCErrorValid(SPI_HandleTypeDef *hspi); /** * @} */ @@ -655,8 +657,7 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, - pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); #endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ /** @@ -725,5 +726,6 @@ uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); } #endif -#endif /* STM32F4xx_HAL_SPI_H */ +#endif /* STM32F1xx_HAL_SPI_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sram.h similarity index 86% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sram.h index e135aa1..9030de6 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sram.h @@ -1,39 +1,36 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_sram.h + * @file stm32f1xx_hal_sram.h * @author MCD Application Team * @brief Header file of SRAM HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_SRAM_H -#define STM32F4xx_HAL_SRAM_H +#ifndef STM32F1xx_HAL_SRAM_H +#define STM32F1xx_HAL_SRAM_H #ifdef __cplusplus extern "C" { #endif -#if defined(FMC_Bank1) || defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /* Includes ------------------------------------------------------------------*/ -#if defined(FSMC_Bank1) -#include "stm32f4xx_ll_fsmc.h" -#else -#include "stm32f4xx_ll_fmc.h" -#endif /* FSMC_Bank1 */ +#include "stm32f1xx_ll_fsmc.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @addtogroup SRAM @@ -67,11 +64,11 @@ typedef struct __SRAM_HandleTypeDef typedef struct #endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ { - FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + FSMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ - FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + FSMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ - FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ + FSMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ HAL_LockTypeDef Lock; /*!< SRAM locking object */ @@ -144,8 +141,8 @@ typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma); */ /* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, - FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FSMC_NORSRAM_TimingTypeDef *Timing, + FSMC_NORSRAM_TimingTypeDef *ExtTiming); HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); @@ -227,10 +224,12 @@ HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram); * @} */ -#endif /* FMC_Bank1 || FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ #ifdef __cplusplus } #endif -#endif /* STM32F4xx_HAL_SRAM_H */ +#endif /* STM32F1xx_HAL_SRAM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h similarity index 97% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h index 8c81414..fb80276 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_tim.h + * @file stm32f1xx_hal_tim.h * @author MCD Application Team * @brief Header file of TIM HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_TIM_H -#define STM32F4xx_HAL_TIM_H +#ifndef STM32F1xx_HAL_TIM_H +#define STM32F1xx_HAL_TIM_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -705,15 +706,6 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @} */ -/** @defgroup TIM_CC_DMA_Request CCx DMA request selection - * @{ - */ -#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ -#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ -/** - * @} - */ - /** @defgroup TIM_Flag_definition TIM Flag Definition * @{ */ @@ -748,16 +740,16 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to /** @defgroup TIM_Clock_Source TIM Clock Source * @{ */ -#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ -#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ #define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ -#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ -#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ -#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ #define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ #define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ #define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ #define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ /** * @} */ @@ -1535,17 +1527,6 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ }while(0) -/** @brief Select the Capture/compare DMA request source. - * @param __HANDLE__ specifies the TIM Handle. - * @param __CCDMA__ specifies Capture/compare DMA request source - * This parameter can be one of the following values: - * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event - * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event - * @retval None - */ -#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ - MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) - /** * @} */ @@ -1659,15 +1640,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to ((__CHANNEL__) == TIM_CHANNEL_3)) #define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) #define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ @@ -1743,13 +1724,13 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) -#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ ((__SELECTION__) == TIM_TS_TI1F_ED) || \ - ((__SELECTION__) == TIM_TS_TI1FP1) || \ - ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ ((__SELECTION__) == TIM_TS_ETRF)) #define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ @@ -1822,8 +1803,8 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to #define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P))) #define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ @@ -1838,11 +1819,11 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) #define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ - } while(0) + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) #define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ @@ -1857,15 +1838,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) #define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelNState[0] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[1] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[2] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[3] = \ - (__CHANNEL_STATE__); \ - } while(0) + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) /** * @} @@ -1873,7 +1854,7 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to /* End of private macros -----------------------------------------------------*/ /* Include TIM HAL Extended module */ -#include "stm32f4xx_hal_tim_ex.h" +#include "stm32f1xx_hal_tim_ex.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup TIM_Exported_Functions TIM Exported Functions @@ -2143,4 +2124,6 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim); } #endif -#endif /* STM32F4xx_HAL_TIM_H */ +#endif /* STM32F1xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h similarity index 54% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h index 39fb500..1979d73 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.h + * @file stm32f1xx_hal_tim_ex.h * @author MCD Application Team * @brief Header file of TIM HAL Extended module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_TIM_EX_H -#define STM32F4xx_HAL_TIM_EX_H +#ifndef STM32F1xx_HAL_TIM_EX_H +#define STM32F1xx_HAL_TIM_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -71,39 +72,6 @@ typedef struct /** @defgroup TIMEx_Remap TIM Extended Remapping * @{ */ -#if defined (TIM2) -#if defined(TIM8) -#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */ -#else -#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */ -#endif /* TIM8 */ -#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */ -#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */ -#endif /* TIM2 */ - -#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */ -#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */ -#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */ -#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */ - -#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */ -#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */ -#if defined(SPDIFRX) -#define TIM_TIM11_SPDIFRX TIM_OR_TI1_RMP_0 /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */ -#endif /* SPDIFRX*/ - -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define LPTIM_REMAP_MASK 0x10000000U - -#define TIM_TIM9_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM9 ITR1 is connected to TIM3 TRGO */ -#define TIM_TIM9_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9 ITR1 is connected to LPTIM1 output */ - -#define TIM_TIM5_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM5 ITR1 is connected to TIM3 TRGO */ -#define TIM_TIM5_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5 ITR1 is connected to LPTIM1 output */ - -#define TIM_TIM1_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM1 ITR2 is connected to TIM3 TRGO */ -#define TIM_TIM1_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1 ITR2 is connected to LPTIM1 output */ -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ /** * @} */ @@ -127,68 +95,6 @@ typedef struct /** @defgroup TIMEx_Private_Macros TIM Extended Private Macros * @{ */ -#if defined(SPDIFRX) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#elif defined(TIM2) -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE))) || \ - (((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM1_LPTIM))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM5_LPTIM))) || \ - (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM9_LPTIM)))) -#elif defined(TIM8) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ -#else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#endif /* SPDIFRX */ /** * @} @@ -328,7 +234,7 @@ HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, /* End of exported functions -------------------------------------------------*/ /* Private functions----------------------------------------------------------*/ -/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions +/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions * @{ */ void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); @@ -351,4 +257,6 @@ void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); #endif -#endif /* STM32F4xx_HAL_TIM_EX_H */ +#endif /* STM32F1xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h index c5f5d3e..f7d5c3f 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_uart.h + * @file stm32f1xx_hal_uart.h * @author MCD Application Team * @brief Header file of UART HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_UART_H -#define __STM32F4xx_HAL_UART_H +#ifndef __STM32F1xx_HAL_UART_H +#define __STM32F1xx_HAL_UART_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -47,9 +48,8 @@ typedef struct { uint32_t BaudRate; /*!< This member configures the UART communication baud rate. The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 - Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ + - IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. This parameter can be a value of @ref UART_Word_Length */ @@ -71,7 +71,8 @@ typedef struct This parameter can be a value of @ref UART_Hardware_Flow_Control */ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). - This parameter can be a value of @ref UART_Over_Sampling */ + This parameter can be a value of @ref UART_Over_Sampling. This feature is only available + on STM32F100xx family, so OverSampling parameter should always be set to 16. */ } UART_InitTypeDef; /** @@ -152,7 +153,7 @@ typedef struct __UART_HandleTypeDef UART_InitTypeDef Init; /*!< UART communication parameters */ - const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ uint16_t TxXferSize; /*!< UART Tx Transfer size */ @@ -315,7 +316,9 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart * @{ */ #define UART_OVERSAMPLING_16 0x00000000U +#if defined(USART_CR1_OVER8) #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) +#endif /* USART_CR1_OVER8 */ /** * @} */ @@ -572,7 +575,7 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) /** @brief Enable CTS flow control * @note This macro allows to enable CTS hardware flow control for a given UART instance, @@ -590,7 +593,7 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart */ #define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ do{ \ - ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ } while(0U) @@ -610,7 +613,7 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart */ #define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ do{ \ - ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ } while(0U) @@ -630,7 +633,7 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart */ #define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ do{ \ - ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ } while(0U) @@ -650,9 +653,10 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart */ #define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ do{ \ - ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ } while(0U) +#if defined(USART_CR3_ONEBIT) /** @brief Macro to enable the UART's one bit sample method * @param __HANDLE__ specifies the UART Handle. @@ -664,8 +668,8 @@ typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart * @param __HANDLE__ specifies the UART Handle. * @retval None */ -#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ - &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) +#endif /* UART_ONE_BIT_SAMPLE_Feature */ /** @brief Enable UART * @param __HANDLE__ specifies the UART Handle. @@ -702,8 +706,7 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, - pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); @@ -719,18 +722,17 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); */ /* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, - uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); @@ -822,34 +824,34 @@ uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); #define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U)) #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ ((STATE) == UART_STATE_ENABLE)) +#if defined(USART_CR1_OVER8) #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ ((SAMPLING) == UART_OVERSAMPLING_8)) +#endif /* USART_CR1_OVER8 */ #define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16)) #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) #define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) -#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 10500000U) +#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 4500000U) #define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU) -#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(4U*((uint64_t)(_BAUD_))))) +#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_))) #define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U) -#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U)\ - + 50U) / 100U) +#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U) /* UART BRR = mantissa + overflow + fraction = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */ -#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \ - (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U) + \ +#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU)) -#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(2U*((uint64_t)(_BAUD_))))) +#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_))) #define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U) -#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U)\ - + 50U) / 100U) +#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U) /* UART BRR = mantissa + overflow + fraction = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */ -#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \ - ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U) + \ +#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \ + ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \ (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U)) /** @@ -880,5 +882,6 @@ HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pDa } #endif -#endif /* __STM32F4xx_HAL_UART_H */ +#endif /* __STM32F1xx_HAL_UART_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_usart.h similarity index 91% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_usart.h index 4496649..cb8ecb4 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_usart.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_usart.h + * @file stm32f1xx_hal_usart.h * @author MCD Application Team * @brief Header file of USART HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_USART_H -#define __STM32F4xx_HAL_USART_H +#ifndef __STM32F1xx_HAL_USART_H +#define __STM32F1xx_HAL_USART_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -47,8 +48,8 @@ typedef struct { uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ + - IntegerDivider = ((PCLKx) / (16 * (husart->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. This parameter can be a value of @ref USART_Word_Length */ @@ -101,7 +102,7 @@ typedef struct __USART_HandleTypeDef USART_InitTypeDef Init; /*!< Usart communication parameters */ - const uint8_t *pTxBuffPtr; /*!< Pointer to Usart Tx transfer Buffer */ + uint8_t *pTxBuffPtr; /*!< Pointer to Usart Tx transfer Buffer */ uint16_t TxXferSize; /*!< Usart Tx Transfer size */ @@ -429,10 +430,10 @@ typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< poin */ #define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == USART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \ (((__INTERRUPT__) >> 28U) == USART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK))) + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK))) #define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == USART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \ (((__INTERRUPT__) >> 28U) == USART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK))) + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK))) /** @brief Checks whether the specified USART interrupt has occurred or not. * @param __HANDLE__ specifies the USART Handle. @@ -448,7 +449,7 @@ typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< poin * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == USART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == USART_CR2_REG_INDEX)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK)) + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK)) /** @brief Macro to enable the USART's one bit sample method * @param __HANDLE__ specifies the USART Handle. @@ -460,8 +461,7 @@ typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< poin * @param __HANDLE__ specifies the USART Handle. * @retval None */ -#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ - &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) +#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) /** @brief Enable USART * @param __HANDLE__ specifies the USART Handle. @@ -496,8 +496,7 @@ void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_USART_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, - pUSART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, pUSART_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID); #endif /* USE_HAL_USART_REGISTER_CALLBACKS */ @@ -509,18 +508,15 @@ HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_ * @{ */ /* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size); -HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); @@ -563,7 +559,7 @@ uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); * */ #define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ - USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) + USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) #define USART_CR1_REG_INDEX 1U #define USART_CR2_REG_INDEX 2U @@ -605,20 +601,20 @@ uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); #define IS_USART_MODE(MODE) ((((MODE) & (~((uint32_t)USART_MODE_TX_RX))) == 0x00U) && ((MODE) != 0x00U)) -#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 12500000U) +#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 4500000U) -#define USART_DIV(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(2U*((uint64_t)(_BAUD_))))) +#define USART_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_))) #define USART_DIVMANT(_PCLK_, _BAUD_) (USART_DIV((_PCLK_), (_BAUD_))/100U) -#define USART_DIVFRAQ(_PCLK_, _BAUD_) ((((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U) +#define USART_DIVFRAQ(_PCLK_, _BAUD_) ((((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U) /* UART BRR = mantissa + overflow + fraction - = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */ - + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF0) << 1) + (UART DIVFRAQ & 0x0FU) */ + #define USART_BRR(_PCLK_, _BAUD_) (((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \ - ((USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \ - (USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x07U)) + ((USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U) << 1U)) + \ + (USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU)) /** * @} */ @@ -644,5 +640,6 @@ uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); } #endif -#endif /* __STM32F4xx_HAL_USART_H */ +#endif /* __STM32F1xx_HAL_USART_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_wwdg.h similarity index 93% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_wwdg.h index ab8b1ea..d9916cf 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_wwdg.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_wwdg.h + * @file stm32f1xx_hal_wwdg.h * @author MCD Application Team * @brief Header file of WWDG HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_WWDG_H -#define STM32F4xx_HAL_WWDG_H +#ifndef STM32F1xx_HAL_WWDG_H +#define STM32F1xx_HAL_WWDG_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -183,7 +184,7 @@ typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer t /** * @brief Enable the WWDG early wakeup interrupt. - * @param __HANDLE__ WWDG handle + * @param __HANDLE__: WWDG handle * @param __INTERRUPT__ specifies the interrupt to enable. * This parameter can be one of the following values: * @arg WWDG_IT_EWI: Early wakeup interrupt @@ -295,4 +296,6 @@ void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg); } #endif -#endif /* STM32F4xx_HAL_WWDG_H */ +#endif /* STM32F1xx_HAL_WWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_adc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_adc.h similarity index 61% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_adc.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_adc.h index 49fee97..7336471 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_adc.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_adc.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_adc.h + * @file stm32f1xx_ll_adc.h * @author MCD Application Team * @brief Header file of ADC LL module. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_ADC_H -#define __STM32F4xx_LL_ADC_H +#ifndef __STM32F1xx_LL_ADC_H +#define __STM32F1xx_LL_ADC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -52,32 +53,32 @@ extern "C" { /* Internal register offset for ADC group regular sequencer configuration */ /* (offset placed into a spare area of literal definition) */ -#define ADC_SQR1_REGOFFSET 0x00000000UL -#define ADC_SQR2_REGOFFSET 0x00000100UL -#define ADC_SQR3_REGOFFSET 0x00000200UL -#define ADC_SQR4_REGOFFSET 0x00000300UL +#define ADC_SQR1_REGOFFSET 0x00000000U +#define ADC_SQR2_REGOFFSET 0x00000100U +#define ADC_SQR3_REGOFFSET 0x00000200U +#define ADC_SQR4_REGOFFSET 0x00000300U #define ADC_REG_SQRX_REGOFFSET_MASK (ADC_SQR1_REGOFFSET | ADC_SQR2_REGOFFSET | ADC_SQR3_REGOFFSET | ADC_SQR4_REGOFFSET) #define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) /* Definition of ADC group regular sequencer bits information to be inserted */ /* into ADC group regular sequencer ranks literals definition. */ -#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ1) */ -#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 5UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ2) */ -#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS (10UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ3) */ -#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (15UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ4) */ -#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ5) */ -#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (25UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ6) */ -#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ7) */ -#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS ( 5UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ8) */ -#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS (10UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ9) */ -#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS (15UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ10) */ -#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ11) */ -#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS (25UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ12) */ -#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ13) */ -#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS ( 5UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ14) */ -#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS (10UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ15) */ -#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS (15UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ16) */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ1) */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 5U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ2) */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS (10U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ3) */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (15U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ4) */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (20U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ5) */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (25U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ6) */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS ( 0U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ7) */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS ( 5U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ8) */ +#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS (10U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ9) */ +#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS (15U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ10) */ +#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS (20U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ11) */ +#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS (25U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ12) */ +#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS ( 0U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ13) */ +#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS ( 5U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ14) */ +#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS (10U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ15) */ +#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS (15U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ16) */ /* Internal mask for ADC group injected sequencer: */ /* To select into literal LL_ADC_INJ_RANK_x the relevant bits for: */ @@ -87,76 +88,22 @@ extern "C" { /* Internal register offset for ADC group injected data register */ /* (offset placed into a spare area of literal definition) */ -#define ADC_JDR1_REGOFFSET 0x00000000UL -#define ADC_JDR2_REGOFFSET 0x00000100UL -#define ADC_JDR3_REGOFFSET 0x00000200UL -#define ADC_JDR4_REGOFFSET 0x00000300UL +#define ADC_JDR1_REGOFFSET 0x00000000U +#define ADC_JDR2_REGOFFSET 0x00000100U +#define ADC_JDR3_REGOFFSET 0x00000200U +#define ADC_JDR4_REGOFFSET 0x00000300U /* Internal register offset for ADC group injected offset configuration */ /* (offset placed into a spare area of literal definition) */ -#define ADC_JOFR1_REGOFFSET 0x00000000UL -#define ADC_JOFR2_REGOFFSET 0x00001000UL -#define ADC_JOFR3_REGOFFSET 0x00002000UL -#define ADC_JOFR4_REGOFFSET 0x00003000UL +#define ADC_JOFR1_REGOFFSET 0x00000000U +#define ADC_JOFR2_REGOFFSET 0x00001000U +#define ADC_JOFR3_REGOFFSET 0x00002000U +#define ADC_JOFR4_REGOFFSET 0x00003000U #define ADC_INJ_JDRX_REGOFFSET_MASK (ADC_JDR1_REGOFFSET | ADC_JDR2_REGOFFSET | ADC_JDR3_REGOFFSET | ADC_JDR4_REGOFFSET) #define ADC_INJ_JOFRX_REGOFFSET_MASK (ADC_JOFR1_REGOFFSET | ADC_JOFR2_REGOFFSET | ADC_JOFR3_REGOFFSET | ADC_JOFR4_REGOFFSET) #define ADC_INJ_RANK_ID_JSQR_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) -/* Internal mask for ADC group regular trigger: */ -/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ -/* - regular trigger source */ -/* - regular trigger edge */ -#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CR2_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ - -/* Mask containing trigger source masks for each of possible */ -/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ -/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ -#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTSEL) >> (4UL * 0UL)) | \ - ((ADC_CR2_EXTSEL) >> (4UL * 1UL)) | \ - ((ADC_CR2_EXTSEL) >> (4UL * 2UL)) | \ - ((ADC_CR2_EXTSEL) >> (4UL * 3UL))) - -/* Mask containing trigger edge masks for each of possible */ -/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ -/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ -#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTEN) >> (4UL * 0UL)) | \ - ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) >> (4UL * 1UL)) | \ - ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) >> (4UL * 2UL)) | \ - ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) >> (4UL * 3UL))) - -/* Definition of ADC group regular trigger bits information. */ -#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS (24UL) /* Value equivalent to POSITION_VAL(ADC_CR2_EXTSEL) */ -#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (28UL) /* Value equivalent to POSITION_VAL(ADC_CR2_EXTEN) */ - - - -/* Internal mask for ADC group injected trigger: */ -/* To select into literal LL_ADC_INJ_TRIG_x the relevant bits for: */ -/* - injected trigger source */ -/* - injected trigger edge */ -#define ADC_INJ_TRIG_EXT_EDGE_DEFAULT (ADC_CR2_JEXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ - -/* Mask containing trigger source masks for each of possible */ -/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ -/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ -#define ADC_INJ_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_JEXTSEL) >> (4UL * 0UL)) | \ - ((ADC_CR2_JEXTSEL) >> (4UL * 1UL)) | \ - ((ADC_CR2_JEXTSEL) >> (4UL * 2UL)) | \ - ((ADC_CR2_JEXTSEL) >> (4UL * 3UL))) - -/* Mask containing trigger edge masks for each of possible */ -/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ -/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ -#define ADC_INJ_TRIG_EDGE_MASK (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_CR2_JEXTEN) >> (4UL * 0UL)) | \ - ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) >> (4UL * 1UL)) | \ - ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) >> (4UL * 2UL)) | \ - ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) >> (4UL * 3UL))) - -/* Definition of ADC group injected trigger bits information. */ -#define ADC_INJ_TRIG_EXTSEL_BITOFFSET_POS (16UL) /* Value equivalent to POSITION_VAL(ADC_CR2_JEXTSEL) */ -#define ADC_INJ_TRIG_EXTEN_BITOFFSET_POS (20UL) /* Value equivalent to POSITION_VAL(ADC_CR2_JEXTEN) */ - /* Internal mask for ADC channel: */ /* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ /* - channel identifier defined by number */ @@ -165,29 +112,28 @@ extern "C" { /* - channel sampling time defined by SMPRx register offset */ /* and SMPx bits positions into SMPRx register */ #define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CR1_AWDCH) -#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS ( 0UL)/* Value equivalent to POSITION_VAL(ADC_CHANNEL_ID_NUMBER_MASK) */ +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS ( 0U)/* Value equivalent to POSITION_VAL(ADC_CHANNEL_ID_NUMBER_MASK) */ #define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_INTERNAL_CH_MASK) /* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ #define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 0x0000001FU /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> POSITION_VAL(ADC_CHANNEL_NUMBER_MASK)) */ /* Channel differentiation between external and internal channels */ -#define ADC_CHANNEL_ID_INTERNAL_CH 0x80000000UL /* Marker of internal channel */ -#define ADC_CHANNEL_ID_INTERNAL_CH_2 0x40000000UL /* Marker of internal channel for other ADC instances, in case of different ADC internal channels mapped on same channel number on different ADC instances */ -#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */ -#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT) +#define ADC_CHANNEL_ID_INTERNAL_CH 0x80000000U /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_2 0x40000000U /* Marker of internal channel for other ADC instances, in case of different ADC internal channels mapped on same channel number on different ADC instances */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2) /* Internal register offset for ADC channel sampling time configuration */ /* (offset placed into a spare area of literal definition) */ -#define ADC_SMPR1_REGOFFSET 0x00000000UL -#define ADC_SMPR2_REGOFFSET 0x02000000UL +#define ADC_SMPR1_REGOFFSET 0x00000000U +#define ADC_SMPR2_REGOFFSET 0x02000000U #define ADC_CHANNEL_SMPRX_REGOFFSET_MASK (ADC_SMPR1_REGOFFSET | ADC_SMPR2_REGOFFSET) -#define ADC_CHANNEL_SMPx_BITOFFSET_MASK 0x01F00000UL -#define ADC_CHANNEL_SMPx_BITOFFSET_POS (20UL) /* Value equivalent to POSITION_VAL(ADC_CHANNEL_SMPx_BITOFFSET_MASK) */ +#define ADC_CHANNEL_SMPx_BITOFFSET_MASK 0x01F00000U +#define ADC_CHANNEL_SMPx_BITOFFSET_POS (20U) /* Value equivalent to POSITION_VAL(ADC_CHANNEL_SMPx_BITOFFSET_MASK) */ /* Definition of channels ID number information to be inserted into */ /* channels literals definition. */ -#define ADC_CHANNEL_0_NUMBER 0x00000000UL +#define ADC_CHANNEL_0_NUMBER 0x00000000U #define ADC_CHANNEL_1_NUMBER ( ADC_CR1_AWDCH_0) #define ADC_CHANNEL_2_NUMBER ( ADC_CR1_AWDCH_1 ) #define ADC_CHANNEL_3_NUMBER ( ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) @@ -205,29 +151,27 @@ extern "C" { #define ADC_CHANNEL_15_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) #define ADC_CHANNEL_16_NUMBER (ADC_CR1_AWDCH_4 ) #define ADC_CHANNEL_17_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0) -#define ADC_CHANNEL_18_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1 ) /* Definition of channels sampling time information to be inserted into */ /* channels literals definition. */ -#define ADC_CHANNEL_0_SMP (ADC_SMPR2_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP0) */ -#define ADC_CHANNEL_1_SMP (ADC_SMPR2_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP1) */ -#define ADC_CHANNEL_2_SMP (ADC_SMPR2_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP2) */ -#define ADC_CHANNEL_3_SMP (ADC_SMPR2_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP3) */ -#define ADC_CHANNEL_4_SMP (ADC_SMPR2_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP4) */ -#define ADC_CHANNEL_5_SMP (ADC_SMPR2_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP5) */ -#define ADC_CHANNEL_6_SMP (ADC_SMPR2_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP6) */ -#define ADC_CHANNEL_7_SMP (ADC_SMPR2_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP7) */ -#define ADC_CHANNEL_8_SMP (ADC_SMPR2_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP8) */ -#define ADC_CHANNEL_9_SMP (ADC_SMPR2_REGOFFSET | ((27UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP9) */ -#define ADC_CHANNEL_10_SMP (ADC_SMPR1_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP10) */ -#define ADC_CHANNEL_11_SMP (ADC_SMPR1_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP11) */ -#define ADC_CHANNEL_12_SMP (ADC_SMPR1_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP12) */ -#define ADC_CHANNEL_13_SMP (ADC_SMPR1_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP13) */ -#define ADC_CHANNEL_14_SMP (ADC_SMPR1_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP14) */ -#define ADC_CHANNEL_15_SMP (ADC_SMPR1_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP15) */ -#define ADC_CHANNEL_16_SMP (ADC_SMPR1_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP16) */ -#define ADC_CHANNEL_17_SMP (ADC_SMPR1_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP17) */ -#define ADC_CHANNEL_18_SMP (ADC_SMPR1_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP18) */ +#define ADC_CHANNEL_0_SMP (ADC_SMPR2_REGOFFSET | (( 0U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP0) */ +#define ADC_CHANNEL_1_SMP (ADC_SMPR2_REGOFFSET | (( 3U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP1) */ +#define ADC_CHANNEL_2_SMP (ADC_SMPR2_REGOFFSET | (( 6U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP2) */ +#define ADC_CHANNEL_3_SMP (ADC_SMPR2_REGOFFSET | (( 9U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP3) */ +#define ADC_CHANNEL_4_SMP (ADC_SMPR2_REGOFFSET | ((12U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP4) */ +#define ADC_CHANNEL_5_SMP (ADC_SMPR2_REGOFFSET | ((15U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP5) */ +#define ADC_CHANNEL_6_SMP (ADC_SMPR2_REGOFFSET | ((18U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP6) */ +#define ADC_CHANNEL_7_SMP (ADC_SMPR2_REGOFFSET | ((21U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP7) */ +#define ADC_CHANNEL_8_SMP (ADC_SMPR2_REGOFFSET | ((24U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP8) */ +#define ADC_CHANNEL_9_SMP (ADC_SMPR2_REGOFFSET | ((27U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP9) */ +#define ADC_CHANNEL_10_SMP (ADC_SMPR1_REGOFFSET | (( 0U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP10) */ +#define ADC_CHANNEL_11_SMP (ADC_SMPR1_REGOFFSET | (( 3U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP11) */ +#define ADC_CHANNEL_12_SMP (ADC_SMPR1_REGOFFSET | (( 6U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP12) */ +#define ADC_CHANNEL_13_SMP (ADC_SMPR1_REGOFFSET | (( 9U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP13) */ +#define ADC_CHANNEL_14_SMP (ADC_SMPR1_REGOFFSET | ((12U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP14) */ +#define ADC_CHANNEL_15_SMP (ADC_SMPR1_REGOFFSET | ((15U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP15) */ +#define ADC_CHANNEL_16_SMP (ADC_SMPR1_REGOFFSET | ((18U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP16) */ +#define ADC_CHANNEL_17_SMP (ADC_SMPR1_REGOFFSET | ((21U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP17) */ /* Internal mask for ADC analog watchdog: */ /* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ @@ -237,7 +181,7 @@ extern "C" { /* selection of ADC group (ADC groups regular and-or injected). */ /* Internal register offset for ADC analog watchdog channel configuration */ -#define ADC_AWD_CR1_REGOFFSET 0x00000000UL +#define ADC_AWD_CR1_REGOFFSET 0x00000000U #define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET) @@ -245,24 +189,12 @@ extern "C" { #define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK) /* Internal register offset for ADC analog watchdog threshold configuration */ -#define ADC_AWD_TR1_HIGH_REGOFFSET 0x00000000UL -#define ADC_AWD_TR1_LOW_REGOFFSET 0x00000001UL +#define ADC_AWD_TR1_HIGH_REGOFFSET 0x00000000U +#define ADC_AWD_TR1_LOW_REGOFFSET 0x00000001U #define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_HIGH_REGOFFSET | ADC_AWD_TR1_LOW_REGOFFSET) /* ADC registers bits positions */ -#define ADC_CR1_RES_BITOFFSET_POS (24UL) /* Value equivalent to POSITION_VAL(ADC_CR1_RES) */ -#define ADC_TR_HT_BITOFFSET_POS (16UL) /* Value equivalent to POSITION_VAL(ADC_TR_HT) */ - -/* ADC internal channels related definitions */ -/* Internal voltage reference VrefInt */ -#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FFF7A2AU)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */ -#define VREFINT_CAL_VREF ( 3300UL) /* Analog voltage reference (Vref+) value with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ -/* Temperature sensor */ -#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FFF7A2CU)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32F4, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */ -#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) (0x1FFF7A2EU)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32F4, temperature sensor ADC raw data acquired at temperature 110 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */ -#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */ -#define TEMPSENSOR_CAL2_TEMP (( int32_t) 110) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */ -#define TEMPSENSOR_CAL_VREFANALOG ( 3300UL) /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (+-10 mV) (unit: mV). */ +#define ADC_CR1_DUALMOD_BITOFFSET_POS (16U) /* Value equivalent to POSITION_VAL(ADC_CR1_DUALMOD) */ /** * @} @@ -290,11 +222,11 @@ extern "C" { * a register from a register basis from which an offset * is applied. * @param __REG__ Register basis from which the offset is applied. - * @param __REG_OFFFSET__ Offset to be applied (unit number of registers). + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). * @retval Pointer to register address */ #define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ - ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U)))) /** * @} @@ -319,30 +251,11 @@ extern "C" { */ typedef struct { - uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. - This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE - - This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */ - -#if defined(ADC_MULTIMODE_SUPPORT) uint32_t Multimode; /*!< Set ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances). This parameter can be a value of @ref ADC_LL_EC_MULTI_MODE This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultimode(). */ - - uint32_t MultiDMATransfer; /*!< Set ADC multimode conversion data transfer: no transfer or transfer by DMA. - This parameter can be a value of @ref ADC_LL_EC_MULTI_DMA_TRANSFER - - This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultiDMATransfer(). */ - - uint32_t MultiTwoSamplingDelay; /*!< Set ADC multimode delay between 2 sampling phases. - This parameter can be a value of @ref ADC_LL_EC_MULTI_TWOSMP_DELAY - - This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultiTwoSamplingDelay(). */ -#endif /* ADC_MULTIMODE_SUPPORT */ - } LL_ADC_CommonInitTypeDef; - /** * @brief Structure definition of some features of ADC instance. * @note These parameters have an impact on ADC scope: ADC instance. @@ -365,11 +278,6 @@ typedef struct */ typedef struct { - uint32_t Resolution; /*!< Set ADC resolution. - This parameter can be a value of @ref ADC_LL_EC_RESOLUTION - - This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */ - uint32_t DataAlignment; /*!< Set ADC conversion data alignment. This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN @@ -405,8 +313,8 @@ typedef struct { uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line). This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE - @note On this STM32 series, setting of external trigger edge is performed - using function @ref LL_ADC_REG_StartConversionExtTrig(). + @note On this STM32 serie, external trigger is set with trigger polarity: rising edge + (only trigger polarity available on this STM32 serie). This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */ @@ -459,8 +367,8 @@ typedef struct { uint32_t TriggerSource; /*!< Set ADC group injected conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line). This parameter can be a value of @ref ADC_LL_EC_INJ_TRIGGER_SOURCE - @note On this STM32 series, setting of external trigger edge is performed - using function @ref LL_ADC_INJ_StartConversionExtTrig(). + @note On this STM32 serie, external trigger is set with trigger polarity: rising edge + (only trigger polarity available on this STM32 serie). This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTriggerSource(). */ @@ -500,24 +408,17 @@ typedef struct * @{ */ #define LL_ADC_FLAG_STRT ADC_SR_STRT /*!< ADC flag ADC group regular conversion start */ -#define LL_ADC_FLAG_EOCS ADC_SR_EOC /*!< ADC flag ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ -#define LL_ADC_FLAG_OVR ADC_SR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_EOS ADC_SR_EOC /*!< ADC flag ADC group regular end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group regular end of unitary conversion. Flag noted as "EOC" is corresponding to flag "EOS" in other STM32 families) */ #define LL_ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC flag ADC group injected conversion start */ -#define LL_ADC_FLAG_JEOS ADC_SR_JEOC /*!< ADC flag ADC group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ +#define LL_ADC_FLAG_JEOS ADC_SR_JEOC /*!< ADC flag ADC group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ #define LL_ADC_FLAG_AWD1 ADC_SR_AWD /*!< ADC flag ADC analog watchdog 1 */ #if defined(ADC_MULTIMODE_SUPPORT) -#define LL_ADC_FLAG_EOCS_MST ADC_CSR_EOC1 /*!< ADC flag ADC multimode master group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ -#define LL_ADC_FLAG_EOCS_SLV1 ADC_CSR_EOC2 /*!< ADC flag ADC multimode slave 1 group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ -#define LL_ADC_FLAG_EOCS_SLV2 ADC_CSR_EOC3 /*!< ADC flag ADC multimode slave 2 group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ -#define LL_ADC_FLAG_OVR_MST ADC_CSR_OVR1 /*!< ADC flag ADC multimode master group regular overrun */ -#define LL_ADC_FLAG_OVR_SLV1 ADC_CSR_OVR2 /*!< ADC flag ADC multimode slave 1 group regular overrun */ -#define LL_ADC_FLAG_OVR_SLV2 ADC_CSR_OVR3 /*!< ADC flag ADC multimode slave 2 group regular overrun */ -#define LL_ADC_FLAG_JEOS_MST ADC_CSR_JEOC1 /*!< ADC flag ADC multimode master group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ -#define LL_ADC_FLAG_JEOS_SLV1 ADC_CSR_JEOC2 /*!< ADC flag ADC multimode slave 1 group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ -#define LL_ADC_FLAG_JEOS_SLV2 ADC_CSR_JEOC3 /*!< ADC flag ADC multimode slave 2 group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ -#define LL_ADC_FLAG_AWD1_MST ADC_CSR_AWD1 /*!< ADC flag ADC multimode master analog watchdog 1 of the ADC master */ -#define LL_ADC_FLAG_AWD1_SLV1 ADC_CSR_AWD2 /*!< ADC flag ADC multimode slave 1 analog watchdog 1 */ -#define LL_ADC_FLAG_AWD1_SLV2 ADC_CSR_AWD3 /*!< ADC flag ADC multimode slave 2 analog watchdog 1 */ +#define LL_ADC_FLAG_EOS_MST ADC_SR_EOC /*!< ADC flag ADC multimode master group regular end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group regular end of unitary conversion. Flag noted as "EOC" is corresponding to flag "EOS" in other STM32 families) */ +#define LL_ADC_FLAG_EOS_SLV ADC_SR_EOC /*!< ADC flag ADC multimode slave group regular end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group regular end of unitary conversion. Flag noted as "EOC" is corresponding to flag "EOS" in other STM32 families) (on STM32F1, this flag must be read from ADC instance slave: ADC2) */ +#define LL_ADC_FLAG_JEOS_MST ADC_SR_JEOC /*!< ADC flag ADC multimode master group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ +#define LL_ADC_FLAG_JEOS_SLV ADC_SR_JEOC /*!< ADC flag ADC multimode slave group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) (on STM32F1, this flag must be read from ADC instance slave: ADC2) */ +#define LL_ADC_FLAG_AWD1_MST ADC_SR_AWD /*!< ADC flag ADC multimode master analog watchdog 1 of the ADC master */ +#define LL_ADC_FLAG_AWD1_SLV ADC_SR_AWD /*!< ADC flag ADC multimode slave analog watchdog 1 of the ADC slave (on STM32F1, this flag must be read from ADC instance slave: ADC2) */ #endif /** * @} @@ -527,9 +428,8 @@ typedef struct * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions * @{ */ -#define LL_ADC_IT_EOCS ADC_CR1_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ -#define LL_ADC_IT_OVR ADC_CR1_OVRIE /*!< ADC interruption ADC group regular overrun */ -#define LL_ADC_IT_JEOS ADC_CR1_JEOCIE /*!< ADC interruption ADC group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ +#define LL_ADC_IT_EOS ADC_CR1_EOCIE /*!< ADC interruption ADC group regular end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group regular end of unitary conversion. Flag noted as "EOC" is corresponding to flag "EOS" in other STM32 families) */ +#define LL_ADC_IT_JEOS ADC_CR1_JEOCIE /*!< ADC interruption ADC group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ #define LL_ADC_IT_AWD1 ADC_CR1_AWDIE /*!< ADC interruption ADC analog watchdog 1 */ /** * @} @@ -541,25 +441,14 @@ typedef struct /* List of ADC registers intended to be used (most commonly) with */ /* DMA transfer. */ /* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ -#define LL_ADC_DMA_REG_REGULAR_DATA 0x00000000UL /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */ +#define LL_ADC_DMA_REG_REGULAR_DATA 0x00000000U /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */ #if defined(ADC_MULTIMODE_SUPPORT) -#define LL_ADC_DMA_REG_REGULAR_DATA_MULTI 0x00000001UL /* ADC group regular conversion data register (corresponding to register CDR) to be used with ADC configured in multimode (available on STM32 devices with several ADC instances). Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadMultiConversionData32() */ +#define LL_ADC_DMA_REG_REGULAR_DATA_MULTI 0x00000001U /* ADC group regular conversion data register (corresponding to register CDR) to be used with ADC configured in multimode (available on STM32 devices with several ADC instances). Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadMultiConversionData32() */ #endif /** * @} */ -/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source - * @{ - */ -#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 0x00000000UL /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */ -#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 ( ADC_CCR_ADCPRE_0) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */ -#define LL_ADC_CLOCK_SYNC_PCLK_DIV6 (ADC_CCR_ADCPRE_1 ) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 6 */ -#define LL_ADC_CLOCK_SYNC_PCLK_DIV8 (ADC_CCR_ADCPRE_1 | ADC_CCR_ADCPRE_0) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 8 */ -/** - * @} - */ - /** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels * @{ */ @@ -568,10 +457,9 @@ typedef struct /* If they are not listed below, they do not require any specific */ /* path enable. In this case, Access to measurement path is done */ /* only by selecting the corresponding ADC internal channel. */ -#define LL_ADC_PATH_INTERNAL_NONE 0x00000000UL /*!< ADC measurement paths all disabled */ -#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_TSVREFE) /*!< ADC measurement path to internal channel VrefInt */ -#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSVREFE) /*!< ADC measurement path to internal channel temperature sensor */ -#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATE) /*!< ADC measurement path to internal channel Vbat */ +#define LL_ADC_PATH_INTERNAL_NONE 0x00000000U /*!< ADC measurement pathes all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CR2_TSVREFE) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CR2_TSVREFE) /*!< ADC measurement path to internal channel temperature sensor */ /** * @} */ @@ -579,10 +467,7 @@ typedef struct /** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution * @{ */ -#define LL_ADC_RESOLUTION_12B 0x00000000UL /*!< ADC resolution 12 bits */ -#define LL_ADC_RESOLUTION_10B ( ADC_CR1_RES_0) /*!< ADC resolution 10 bits */ -#define LL_ADC_RESOLUTION_8B (ADC_CR1_RES_1 ) /*!< ADC resolution 8 bits */ -#define LL_ADC_RESOLUTION_6B (ADC_CR1_RES_1 | ADC_CR1_RES_0) /*!< ADC resolution 6 bits */ +#define LL_ADC_RESOLUTION_12B 0x00000000U /*!< ADC resolution 12 bits */ /** * @} */ @@ -590,8 +475,8 @@ typedef struct /** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment * @{ */ -#define LL_ADC_DATA_ALIGN_RIGHT 0x00000000UL /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ -#define LL_ADC_DATA_ALIGN_LEFT (ADC_CR2_ALIGN) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +#define LL_ADC_DATA_ALIGN_RIGHT 0x00000000U /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CR2_ALIGN) /*!< ADC conversion data alignment: left aligned (aligment on data register MSB bit 15)*/ /** * @} */ @@ -599,7 +484,7 @@ typedef struct /** @defgroup ADC_LL_EC_SCAN_SELECTION ADC instance - Scan selection * @{ */ -#define LL_ADC_SEQ_SCAN_DISABLE 0x00000000UL /*!< ADC conversion is performed in unitary conversion mode (one channel converted, that defined in rank 1). Configuration of both groups regular and injected sequencers (sequence length, ...) is discarded: equivalent to length of 1 rank.*/ +#define LL_ADC_SEQ_SCAN_DISABLE 0x00000000U /*!< ADC conversion is performed in unitary conversion mode (one channel converted, that defined in rank 1). Configuration of both groups regular and injected sequencers (sequence length, ...) is discarded: equivalent to length of 1 rank.*/ #define LL_ADC_SEQ_SCAN_ENABLE (ADC_CR1_SCAN) /*!< ADC conversions are performed in sequence conversions mode, according to configuration of both groups regular and injected sequencers (sequence length, ...). */ /** * @} @@ -608,9 +493,9 @@ typedef struct /** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups * @{ */ -#define LL_ADC_GROUP_REGULAR 0x00000001UL /*!< ADC group regular (available on all STM32 devices) */ -#define LL_ADC_GROUP_INJECTED 0x00000002UL /*!< ADC group injected (not available on all STM32 devices)*/ -#define LL_ADC_GROUP_REGULAR_INJECTED 0x00000003UL /*!< ADC both groups regular and injected */ +#define LL_ADC_GROUP_REGULAR 0x00000001U /*!< ADC group regular (available on all STM32 devices) */ +#define LL_ADC_GROUP_INJECTED 0x00000002U /*!< ADC group injected (not available on all STM32 devices)*/ +#define LL_ADC_GROUP_REGULAR_INJECTED 0x00000003U /*!< ADC both groups regular and injected */ /** * @} */ @@ -636,15 +521,8 @@ typedef struct #define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ #define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ #define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ -#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ -#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. On STM32F4, ADC channel available only on ADC instance: ADC1. */ -#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. On STM32F4, ADC channel available only on ADC instance: ADC1. */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F415xx) || defined(STM32F417xx) -#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. On STM32F4, ADC channel available only on ADC instance: ADC1. */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx */ -#if defined(STM32F411xE) || defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT) /*!< ADC internal channel connected to Temperature sensor. On STM32F4, ADC channel available only on ADC instance: ADC1. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */ -#endif /* STM32F411xE || STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. On STM32F1, ADC channel available only on ADC instance: ADC1. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */ /** * @} */ @@ -652,23 +530,33 @@ typedef struct /** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source * @{ */ -#define LL_ADC_REG_TRIG_SOFTWARE 0x00000000UL /*!< ADC group regular conversion trigger internal: SW start. */ -#define LL_ADC_REG_TRIG_EXT_TIM1_CH1 (ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM1 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM1_CH2 (ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM1 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM1_CH3 (ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM1 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM2_CH2 (ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM2_CH3 (ADC_CR2_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM2_CH4 (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM3_CH1 (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO (ADC_CR2_EXTSEL_3 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM4_CH4 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM4 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM5_CH1 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM5 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM5_CH2 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM5 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM5_CH3 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM5 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM8_CH1 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM8 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM8 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/* ADC group regular external triggers for ADC instances: ADC1, ADC2, ADC3 (for ADC instances ADCx available on the selected device) */ +#define LL_ADC_REG_TRIG_SOFTWARE (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0) /*!< ADC group regular conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH3 (ADC_CR2_EXTSEL_1) /*!< ADC group regular conversion trigger from external IP: TIM1 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +/* ADC group regular external triggers for ADC instances: ADC1, ADC2 (for ADC instances ADCx available on the selected device) */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH1 0x00000000U /*!< ADC group regular conversion trigger from external IP: TIM1 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH2 (ADC_CR2_EXTSEL_0) /*!< ADC group regular conversion trigger from external IP: TIM1 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH2 (ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO (ADC_CR2_EXTSEL_2) /*!< ADC group regular conversion trigger from external IP: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM4_CH4 (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0) /*!< ADC group regular conversion trigger from external IP: TIM4 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1) /*!< ADC group regular conversion trigger from external IP: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) +/* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */ +/* XL-density devices. */ +/* Note: To use TIM8_TRGO on ADC1 or ADC2, a remap of trigger must be done */ +/* A remap of trigger must be done at top level (refer to */ +/* AFIO peripheral). */ +#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external IP: TIM8 TRGO. Trigger edge set to rising edge (default setting). Available only on high-density and XL-density devices. A remap of trigger must be done at top level (refer to AFIO peripheral).*/ +#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined (STM32F103xE) || defined (STM32F103xG) +/* ADC group regular external triggers for ADC instances: ADC3 (for ADC instances ADCx available on the selected device) */ +#define LL_ADC_REG_TRIG_EXT_TIM3_CH1 (LL_ADC_REG_TRIG_EXT_TIM1_CH1) /*!< ADC group regular conversion trigger from external IP: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH3 (LL_ADC_REG_TRIG_EXT_TIM1_CH2) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM8_CH1 (LL_ADC_REG_TRIG_EXT_TIM2_CH2) /*!< ADC group regular conversion trigger from external IP: TIM8 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO_ADC3 (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion trigger from external IP: TIM8 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM5_CH1 (LL_ADC_REG_TRIG_EXT_TIM4_CH4) /*!< ADC group regular conversion trigger from external IP: TIM5 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM5_CH3 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external IP: TIM5 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#endif /** * @} */ @@ -676,9 +564,7 @@ typedef struct /** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge * @{ */ -#define LL_ADC_REG_TRIG_EXT_RISING ( ADC_CR2_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to rising edge */ -#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CR2_EXTEN_1 ) /*!< ADC group regular conversion trigger polarity set to falling edge */ -#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CR2_EXTEN_1 | ADC_CR2_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +#define LL_ADC_REG_TRIG_EXT_RISING ADC_CR2_EXTTRIG /*!< ADC group regular conversion trigger polarity set to rising edge */ /** * @} */ @@ -686,7 +572,7 @@ typedef struct /** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode * @{ */ -#define LL_ADC_REG_CONV_SINGLE 0x00000000UL /*!< ADC conversions are performed in single mode: one conversion per trigger */ +#define LL_ADC_REG_CONV_SINGLE 0x00000000U /*!< ADC conversions are performed in single mode: one conversion per trigger */ #define LL_ADC_REG_CONV_CONTINUOUS (ADC_CR2_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */ /** * @} @@ -695,18 +581,8 @@ typedef struct /** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data * @{ */ -#define LL_ADC_REG_DMA_TRANSFER_NONE 0x00000000UL /*!< ADC conversions are not transferred by DMA */ -#define LL_ADC_REG_DMA_TRANSFER_LIMITED ( ADC_CR2_DMA) /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */ -#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CR2_DDS | ADC_CR2_DMA) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */ -/** - * @} - */ - -/** @defgroup ADC_LL_EC_REG_FLAG_EOC_SELECTION ADC group regular - Flag EOC selection (unitary or sequence conversions) - * @{ - */ -#define LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV 0x00000000UL /*!< ADC flag EOC (end of unitary conversion) selected */ -#define LL_ADC_REG_FLAG_EOC_UNITARY_CONV (ADC_CR2_EOCS) /*!< ADC flag EOS (end of sequence conversions) selected */ +#define LL_ADC_REG_DMA_TRANSFER_NONE 0x00000000U /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CR2_DMA) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */ /** * @} */ @@ -714,7 +590,7 @@ typedef struct /** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length * @{ */ -#define LL_ADC_REG_SEQ_SCAN_DISABLE 0x00000000UL /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE 0x00000000U /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS ( ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS ( ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS ( ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */ @@ -737,7 +613,7 @@ typedef struct /** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode * @{ */ -#define LL_ADC_REG_SEQ_DISCONT_DISABLE 0x00000000UL /*!< ADC group regular sequencer discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE 0x00000000U /*!< ADC group regular sequencer discontinuous mode disable */ #define LL_ADC_REG_SEQ_DISCONT_1RANK ( ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ #define LL_ADC_REG_SEQ_DISCONT_2RANKS ( ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enabled with sequence interruption every 2 ranks */ #define LL_ADC_REG_SEQ_DISCONT_3RANKS ( ADC_CR1_DISCNUM_1 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 3 ranks */ @@ -776,23 +652,32 @@ typedef struct /** @defgroup ADC_LL_EC_INJ_TRIGGER_SOURCE ADC group injected - Trigger source * @{ */ -#define LL_ADC_INJ_TRIG_SOFTWARE 0x00000000UL /*!< ADC group injected conversion trigger internal: SW start. */ -#define LL_ADC_INJ_TRIG_EXT_TIM1_CH4 (ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO (ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1 (ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO (ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM3_CH2 (ADC_CR2_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4 (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM4_CH1 (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM4_CH2 (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM4_CH3 (ADC_CR2_JEXTSEL_3 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM5_CH4 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM5 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM5_TRGO (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM5 TRGO. Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM8_CH2 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM8_CH3 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_TIM8_CH4 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ -#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: external interrupt line 15. Trigger edge set to rising edge (default setting). */ +/* ADC group injected external triggers for ADC instances: ADC1, ADC2, ADC3 (for ADC instances ADCx available on the selected device) */ +#define LL_ADC_INJ_TRIG_SOFTWARE (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0) /*!< ADC group injected conversion trigger internal: SW start. */ +#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO 0x00000000U /*!< ADC group injected conversion trigger from external IP: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM1_CH4 (ADC_CR2_JEXTSEL_0) /*!< ADC group injected conversion trigger from external IP: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +/* ADC group injected external triggers for ADC instances: ADC1, ADC2 (for ADC instances ADCx available on the selected device) */ +#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO (ADC_CR2_JEXTSEL_1) /*!< ADC group injected conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1 (ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0) /*!< ADC group injected conversion trigger from external IP: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4 (ADC_CR2_JEXTSEL_2) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0) /*!< ADC group injected conversion trigger from external IP: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1) /*!< ADC group injected conversion trigger from external IP: external interrupt line 15. Trigger edge set to rising edge (default setting). */ +#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) +/* Note: TIM8_CH4 is available on ADC1 and ADC2 only in high-density and */ +/* XL-density devices. */ +/* Note: To use TIM8_TRGO on ADC1 or ADC2, a remap of trigger must be done */ +/* A remap of trigger must be done at top level (refer to */ +/* AFIO peripheral). */ +#define LL_ADC_INJ_TRIG_EXT_TIM8_CH4 (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). Available only on high-density and XL-density devices. A remap of trigger must be done at top level (refer to AFIO peripheral). */ +#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined (STM32F103xE) || defined (STM32F103xG) +/* ADC group injected external triggers for ADC instances: ADC3 (for ADC instances ADCx available on the selected device) */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_CH3 (LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM8_CH2 (LL_ADC_INJ_TRIG_EXT_TIM2_CH1) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM8_CH4_ADC3 (LL_ADC_INJ_TRIG_EXT_TIM3_CH4) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM5_TRGO (LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM5 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM5_CH4 (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) /*!< ADC group injected conversion trigger from external IP: TIM5 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#endif /** * @} */ @@ -800,9 +685,7 @@ typedef struct /** @defgroup ADC_LL_EC_INJ_TRIGGER_EDGE ADC group injected - Trigger edge * @{ */ -#define LL_ADC_INJ_TRIG_EXT_RISING ( ADC_CR2_JEXTEN_0) /*!< ADC group injected conversion trigger polarity set to rising edge */ -#define LL_ADC_INJ_TRIG_EXT_FALLING (ADC_CR2_JEXTEN_1 ) /*!< ADC group injected conversion trigger polarity set to falling edge */ -#define LL_ADC_INJ_TRIG_EXT_RISINGFALLING (ADC_CR2_JEXTEN_1 | ADC_CR2_JEXTEN_0) /*!< ADC group injected conversion trigger polarity set to both rising and falling edges */ +#define LL_ADC_INJ_TRIG_EXT_RISING ADC_CR2_JEXTTRIG /*!< ADC group injected conversion trigger polarity set to rising edge */ /** * @} */ @@ -810,7 +693,7 @@ typedef struct /** @defgroup ADC_LL_EC_INJ_TRIG_AUTO ADC group injected - Automatic trigger mode * @{ */ -#define LL_ADC_INJ_TRIG_INDEPENDENT 0x00000000UL /*!< ADC group injected conversion trigger independent. Setting mandatory if ADC group injected injected trigger source is set to an external trigger. */ +#define LL_ADC_INJ_TRIG_INDEPENDENT 0x00000000U /*!< ADC group injected conversion trigger independent. Setting mandatory if ADC group injected injected trigger source is set to an external trigger. */ #define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR (ADC_CR1_JAUTO) /*!< ADC group injected conversion trigger from ADC group regular. Setting compliant only with group injected trigger source set to SW start, without any further action on ADC group injected conversion start or stop: in this case, ADC group injected is controlled only from ADC group regular. */ /** * @} @@ -820,7 +703,7 @@ typedef struct /** @defgroup ADC_LL_EC_INJ_SEQ_SCAN_LENGTH ADC group injected - Sequencer scan length * @{ */ -#define LL_ADC_INJ_SEQ_SCAN_DISABLE 0x00000000UL /*!< ADC group injected sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_INJ_SEQ_SCAN_DISABLE 0x00000000U /*!< ADC group injected sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ #define LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS ( ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 2 ranks in the sequence */ #define LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS (ADC_JSQR_JL_1 ) /*!< ADC group injected sequencer enable with 3 ranks in the sequence */ #define LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS (ADC_JSQR_JL_1 | ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 4 ranks in the sequence */ @@ -831,7 +714,7 @@ typedef struct /** @defgroup ADC_LL_EC_INJ_SEQ_DISCONT_MODE ADC group injected - Sequencer discontinuous mode * @{ */ -#define LL_ADC_INJ_SEQ_DISCONT_DISABLE 0x00000000UL /*!< ADC group injected sequencer discontinuous mode disable */ +#define LL_ADC_INJ_SEQ_DISCONT_DISABLE 0x00000000U /*!< ADC group injected sequencer discontinuous mode disable */ #define LL_ADC_INJ_SEQ_DISCONT_1RANK (ADC_CR1_JDISCEN) /*!< ADC group injected sequencer discontinuous mode enable with sequence interruption every rank */ /** * @} @@ -840,10 +723,10 @@ typedef struct /** @defgroup ADC_LL_EC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks * @{ */ -#define LL_ADC_INJ_RANK_1 (ADC_JDR1_REGOFFSET | ADC_JOFR1_REGOFFSET | 0x00000001UL) /*!< ADC group injected sequencer rank 1 */ -#define LL_ADC_INJ_RANK_2 (ADC_JDR2_REGOFFSET | ADC_JOFR2_REGOFFSET | 0x00000002UL) /*!< ADC group injected sequencer rank 2 */ -#define LL_ADC_INJ_RANK_3 (ADC_JDR3_REGOFFSET | ADC_JOFR3_REGOFFSET | 0x00000003UL) /*!< ADC group injected sequencer rank 3 */ -#define LL_ADC_INJ_RANK_4 (ADC_JDR4_REGOFFSET | ADC_JOFR4_REGOFFSET | 0x00000004UL) /*!< ADC group injected sequencer rank 4 */ +#define LL_ADC_INJ_RANK_1 (ADC_JDR1_REGOFFSET | ADC_JOFR1_REGOFFSET | 0x00000001U) /*!< ADC group injected sequencer rank 1 */ +#define LL_ADC_INJ_RANK_2 (ADC_JDR2_REGOFFSET | ADC_JOFR2_REGOFFSET | 0x00000002U) /*!< ADC group injected sequencer rank 2 */ +#define LL_ADC_INJ_RANK_3 (ADC_JDR3_REGOFFSET | ADC_JOFR3_REGOFFSET | 0x00000003U) /*!< ADC group injected sequencer rank 3 */ +#define LL_ADC_INJ_RANK_4 (ADC_JDR4_REGOFFSET | ADC_JOFR4_REGOFFSET | 0x00000004U) /*!< ADC group injected sequencer rank 4 */ /** * @} */ @@ -851,14 +734,14 @@ typedef struct /** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time * @{ */ -#define LL_ADC_SAMPLINGTIME_3CYCLES 0x00000000UL /*!< Sampling time 3 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_15CYCLES (ADC_SMPR1_SMP10_0) /*!< Sampling time 15 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_28CYCLES (ADC_SMPR1_SMP10_1) /*!< Sampling time 28 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_56CYCLES (ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0) /*!< Sampling time 56 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_84CYCLES (ADC_SMPR1_SMP10_2) /*!< Sampling time 84 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_112CYCLES (ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0) /*!< Sampling time 112 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_144CYCLES (ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1) /*!< Sampling time 144 ADC clock cycles */ -#define LL_ADC_SAMPLINGTIME_480CYCLES (ADC_SMPR1_SMP10) /*!< Sampling time 480 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_1CYCLE_5 0x00000000U /*!< Sampling time 1.5 ADC clock cycle */ +#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR2_SMP0_0) /*!< Sampling time 7.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_13CYCLES_5 (ADC_SMPR2_SMP0_1) /*!< Sampling time 13.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_28CYCLES_5 (ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0) /*!< Sampling time 28.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_41CYCLES_5 (ADC_SMPR2_SMP0_2) /*!< Sampling time 41.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_55CYCLES_5 (ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_0) /*!< Sampling time 55.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_71CYCLES_5 (ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1) /*!< Sampling time 71.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_239CYCLES_5 (ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0) /*!< Sampling time 239.5 ADC clock cycles */ /** * @} */ @@ -874,7 +757,7 @@ typedef struct /** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels * @{ */ -#define LL_ADC_AWD_DISABLE 0x00000000UL /*!< ADC analog watchdog monitoring disabled */ +#define LL_ADC_AWD_DISABLE 0x00000000U /*!< ADC analog watchdog monitoring disabled */ #define LL_ADC_AWD_ALL_CHANNELS_REG ( ADC_CR1_AWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ #define LL_ADC_AWD_ALL_CHANNELS_INJ ( ADC_CR1_JAWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by group injected only */ #define LL_ADC_AWD_ALL_CHANNELS_REG_INJ ( ADC_CR1_JAWDEN | ADC_CR1_AWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by either group regular or injected */ @@ -932,25 +815,12 @@ typedef struct #define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ #define LL_ADC_AWD_CHANNEL_17_INJ ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group injected only */ #define LL_ADC_AWD_CHANNEL_17_REG_INJ ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by either group regular or injected */ -#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ -#define LL_ADC_AWD_CHANNEL_18_INJ ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group injected only */ -#define LL_ADC_AWD_CHANNEL_18_REG_INJ ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by either group regular or injected */ #define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */ #define LL_ADC_AWD_CH_VREFINT_INJ ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group injected only */ #define LL_ADC_AWD_CH_VREFINT_REG_INJ ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by either group regular or injected */ -#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */ -#define LL_ADC_AWD_CH_VBAT_INJ ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group injected only */ -#define LL_ADC_AWD_CH_VBAT_REG_INJ ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F415xx) || defined(STM32F417xx) #define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */ #define LL_ADC_AWD_CH_TEMPSENSOR_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group injected only */ #define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by either group regular or injected */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx */ -#if defined(STM32F411xE) || defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */ -#define LL_ADC_AWD_CH_TEMPSENSOR_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group injected only. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */ -#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by either group regular or injected. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */ -#endif /* STM32F411xE || STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ /** * @} */ @@ -964,63 +834,30 @@ typedef struct * @} */ +#if !defined(ADC_MULTIMODE_SUPPORT) +/** @defgroup ADC_LL_EC_MULTI_MODE Multimode - Mode + * @{ + */ +#define LL_ADC_MULTI_INDEPENDENT 0x00000000U /*!< ADC dual mode disabled (ADC independent mode) */ +/** + * @} + */ +#endif #if defined(ADC_MULTIMODE_SUPPORT) /** @defgroup ADC_LL_EC_MULTI_MODE Multimode - Mode * @{ */ -#define LL_ADC_MULTI_INDEPENDENT 0x00000000UL /*!< ADC dual mode disabled (ADC independent mode) */ -#define LL_ADC_MULTI_DUAL_REG_SIMULT ( ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 ) /*!< ADC dual mode enabled: group regular simultaneous */ -#define LL_ADC_MULTI_DUAL_REG_INTERL ( ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: Combined group regular interleaved */ -#define LL_ADC_MULTI_DUAL_INJ_SIMULT ( ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: group injected simultaneous */ -#define LL_ADC_MULTI_DUAL_INJ_ALTERN (ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */ -#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM ( ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */ -#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT ( ADC_CCR_MULTI_1 ) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */ -#define LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM ( ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: Combined group regular interleaved + group injected simultaneous */ -#if defined(ADC3) -#define LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM (ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: Combined group regular simultaneous + group injected simultaneous */ -#define LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT (ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1 ) /*!< ADC triple mode enabled: Combined group regular simultaneous + group injected alternate trigger */ -#define LL_ADC_MULTI_TRIPLE_INJ_SIMULT (ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: group injected simultaneous */ -#define LL_ADC_MULTI_TRIPLE_REG_SIMULT (ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 ) /*!< ADC triple mode enabled: group regular simultaneous */ -#define LL_ADC_MULTI_TRIPLE_REG_INTERL (ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: Combined group regular interleaved */ -#define LL_ADC_MULTI_TRIPLE_INJ_ALTERN (ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */ -#endif -/** - * @} - */ +#define LL_ADC_MULTI_INDEPENDENT 0x00000000U /*!< ADC dual mode disabled (ADC independent mode) */ +#define LL_ADC_MULTI_DUAL_REG_SIMULT ( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 ) /*!< ADC dual mode enabled: group regular simultaneous */ +#define LL_ADC_MULTI_DUAL_REG_INTERL_FAST ( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0) /*!< ADC dual mode enabled: Combined group regular interleaved fast (delay between ADC sampling phases: 7 ADC clock cycles) (equivalent to multimode sampling delay set to "LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES" on other STM32 devices)) */ +#define LL_ADC_MULTI_DUAL_REG_INTERL_SLOW (ADC_CR1_DUALMOD_3 ) /*!< ADC dual mode enabled: Combined group regular interleaved slow (delay between ADC sampling phases: 14 ADC clock cycles) (equivalent to multimode sampling delay set to "LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES" on other STM32 devices)) */ +#define LL_ADC_MULTI_DUAL_INJ_SIMULT ( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_0) /*!< ADC dual mode enabled: group injected simultaneous slow (delay between ADC sampling phases: 14 ADC clock cycles) (equivalent to multimode sampling delay set to "LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES" on other STM32 devices)) */ +#define LL_ADC_MULTI_DUAL_INJ_ALTERN (ADC_CR1_DUALMOD_3 | ADC_CR1_DUALMOD_0) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */ +#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM ( ADC_CR1_DUALMOD_0) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */ +#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT ( ADC_CR1_DUALMOD_1 ) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */ +#define LL_ADC_MULTI_DUAL_REG_INTFAST_INJ_SIM ( ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0) /*!< ADC dual mode enabled: Combined group regular interleaved fast (delay between ADC sampling phases: 7 ADC clock cycles) + group injected simultaneous */ +#define LL_ADC_MULTI_DUAL_REG_INTSLOW_INJ_SIM ( ADC_CR1_DUALMOD_2 ) /*!< ADC dual mode enabled: Combined group regular interleaved slow (delay between ADC sampling phases: 14 ADC clock cycles) + group injected simultaneous */ -/** @defgroup ADC_LL_EC_MULTI_DMA_TRANSFER Multimode - DMA transfer - * @{ - */ -#define LL_ADC_MULTI_REG_DMA_EACH_ADC 0x00000000UL /*!< ADC multimode group regular conversions are transferred by DMA: each ADC uses its own DMA channel, with its individual DMA transfer settings */ -#define LL_ADC_MULTI_REG_DMA_LIMIT_1 ( ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 1: 2 or 3 (dual or triple mode) half-words one by one, ADC1 then ADC2 then ADC3. */ -#define LL_ADC_MULTI_REG_DMA_LIMIT_2 ( ADC_CCR_DMA_1 ) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 2: 2 or 3 (dual or triple mode) half-words one by one, ADC2&1 then ADC1&3 then ADC3&2. */ -#define LL_ADC_MULTI_REG_DMA_LIMIT_3 ( ADC_CCR_DMA_1 | ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 3: 2 or 3 (dual or triple mode) bytes one by one, ADC2&1 then ADC1&3 then ADC3&2. */ -#define LL_ADC_MULTI_REG_DMA_UNLMT_1 (ADC_CCR_DDS | ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 1: 2 or 3 (dual or triple mode) half-words one by one, ADC1 then ADC2 then ADC3. */ -#define LL_ADC_MULTI_REG_DMA_UNLMT_2 (ADC_CCR_DDS | ADC_CCR_DMA_1 ) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 2: 2 or 3 (dual or triple mode) half-words by pairs, ADC2&1 then ADC1&3 then ADC3&2. */ -#define LL_ADC_MULTI_REG_DMA_UNLMT_3 (ADC_CCR_DDS | ADC_CCR_DMA_1 | ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 3: 2 or 3 (dual or triple mode) bytes one by one, ADC2&1 then ADC1&3 then ADC3&2. */ -/** - * @} - */ - -/** @defgroup ADC_LL_EC_MULTI_TWOSMP_DELAY Multimode - Delay between two sampling phases - * @{ - */ -#define LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES 0x00000000UL /*!< ADC multimode delay between two sampling phases: 5 ADC clock cycles*/ -#define LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES ( ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 6 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES ( ADC_CCR_DELAY_1 ) /*!< ADC multimode delay between two sampling phases: 7 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES ( ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 8 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES ( ADC_CCR_DELAY_2 ) /*!< ADC multimode delay between two sampling phases: 9 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES ( ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 10 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES ( ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 ) /*!< ADC multimode delay between two sampling phases: 11 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES ( ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 12 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES (ADC_CCR_DELAY_3 ) /*!< ADC multimode delay between two sampling phases: 13 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 14 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 ) /*!< ADC multimode delay between two sampling phases: 15 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 16 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 ) /*!< ADC multimode delay between two sampling phases: 17 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 18 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 ) /*!< ADC multimode delay between two sampling phases: 19 ADC clock cycles */ -#define LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 20 ADC clock cycles */ /** * @} */ @@ -1028,9 +865,9 @@ typedef struct /** @defgroup ADC_LL_EC_MULTI_MASTER_SLAVE Multimode - ADC master or slave * @{ */ -#define LL_ADC_MULTI_MASTER ( ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC instances: ADC master */ -#define LL_ADC_MULTI_SLAVE (ADC_CDR_RDATA_SLV ) /*!< In multimode, selection among several ADC instances: ADC slave */ -#define LL_ADC_MULTI_MASTER_SLAVE (ADC_CDR_RDATA_SLV | ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC instances: both ADC master and ADC slave */ +#define LL_ADC_MULTI_MASTER ( ADC_DR_DATA) /*!< In multimode, selection among several ADC instances: ADC master */ +#define LL_ADC_MULTI_SLAVE (ADC_DR_ADC2DATA ) /*!< In multimode, selection among several ADC instances: ADC slave */ +#define LL_ADC_MULTI_MASTER_SLAVE (ADC_DR_ADC2DATA | ADC_DR_DATA) /*!< In multimode, selection among several ADC instances: both ADC master and ADC slave */ /** * @} */ @@ -1052,24 +889,40 @@ typedef struct /* configuration (system clock versus ADC clock), */ /* and therefore must be defined in user application. */ /* Indications for estimation of ADC timeout delays, for this */ -/* STM32 series: */ -/* - ADC enable time: maximum delay is 2us */ +/* STM32 serie: */ +/* - ADC enable time: maximum delay is 1us */ /* (refer to device datasheet, parameter "tSTAB") */ /* - ADC conversion time: duration depending on ADC clock and ADC */ /* configuration. */ /* (refer to device reference manual, section "Timing") */ -/* Delay for internal voltage reference stabilization time. */ -/* Delay set to maximum value (refer to device datasheet, */ -/* parameter "tSTART"). */ -/* Unit: us */ -#define LL_ADC_DELAY_VREFINT_STAB_US ( 10UL) /*!< Delay for internal voltage reference stabilization time */ - /* Delay for temperature sensor stabilization time. */ /* Literal set to maximum value (refer to device datasheet, */ /* parameter "tSTART"). */ /* Unit: us */ -#define LL_ADC_DELAY_TEMPSENSOR_STAB_US ( 10UL) /*!< Delay for internal voltage reference stabilization time */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (10U) /*!< Delay for internal voltage reference stabilization time */ + +/* Delay required between ADC disable and ADC calibration start. */ +/* Note: On this STM32 serie, before starting a calibration, */ +/* ADC must be disabled. */ +/* A minimum number of ADC clock cycles are required */ +/* between ADC disable state and calibration start. */ +/* Refer to literal @ref LL_ADC_DELAY_ENABLE_CALIB_ADC_CYCLES. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_DISABLE_CALIB_ADC_CYCLES (2U) /*!< Delay required between ADC disable and ADC calibration start */ + +/* Delay required between end of ADC Enable and the start of ADC calibration. */ +/* Note: On this STM32 serie, a minimum number of ADC clock cycles */ +/* are required between the end of ADC enable and the start of ADC */ +/* calibration. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_ENABLE_CALIB_ADC_CYCLES (2U) /*!< Delay required between end of ADC enable and the start of ADC calibration */ /** * @} @@ -1141,13 +994,10 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval Value between Min_Data=0 and Max_Data=18 */ #define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ @@ -1159,7 +1009,7 @@ typedef struct * @note Example: * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) * will return a data equivalent to "LL_ADC_CHANNEL_4". - * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @param __DECIMAL_NB__: Value between Min_Data=0 and Max_Data=18 * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 * @arg @ref LL_ADC_CHANNEL_1 @@ -1179,27 +1029,24 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n + * (1) On STM32F1, parameter available only on ADC instance: ADC1.\n * (1) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). */ #define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ - (((__DECIMAL_NB__) <= 9UL) \ + (((__DECIMAL_NB__) <= 9U) \ ? ( \ ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ - (ADC_SMPR2_REGOFFSET | (((uint32_t) (3UL * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + (ADC_SMPR2_REGOFFSET | (((uint32_t) (3U * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ ) \ : \ ( \ ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ - (ADC_SMPR1_REGOFFSET | (((uint32_t) (3UL * ((__DECIMAL_NB__) - 10UL))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + (ADC_SMPR1_REGOFFSET | (((uint32_t) (3U * ((__DECIMAL_NB__) - 10U))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ ) \ ) @@ -1239,18 +1086,15 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. */ #define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ - (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL) + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0U) /** * @brief Helper macro to convert a channel defined from parameter @@ -1284,13 +1128,10 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 * @arg @ref LL_ADC_CHANNEL_1 @@ -1310,7 +1151,6 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 */ #define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) @@ -1331,20 +1171,22 @@ typedef struct * @param __ADC_INSTANCE__ ADC instance * @param __CHANNEL__ This parameter can be one of the following values: * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1. - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. * Value "1" if the internal channel selected is available on the ADC instance selected. */ #define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ - ( \ - ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ - ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ - ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT) \ + (((__ADC_INSTANCE__) == ADC1) \ + ? ( \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) \ + ) \ + : \ + (0U) \ ) + /** * @brief Helper macro to define ADC analog watchdog parameter: * define a single channel to monitor with analog watchdog @@ -1373,13 +1215,10 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n + * (1) On STM32F1, parameter available only on ADC instance: ADC1.\n * (1) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). @@ -1446,21 +1285,14 @@ typedef struct * @arg @ref LL_ADC_AWD_CHANNEL_17_REG * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG - * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (1) * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (1) * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (1) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (1)(2) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (1)(2) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1)(2) - * @arg @ref LL_ADC_AWD_CH_VBAT_REG (1) - * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (1) - * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. */ #define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ (((__GROUP__) == LL_ADC_GROUP_REGULAR) \ @@ -1485,14 +1317,14 @@ typedef struct * ); * @param __ADC_RESOLUTION__ This parameter can be one of the following values: * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF * @retval Value between Min_Data=0x000 and Max_Data=0xFFF */ +/* Note: On this STM32 serie, ADC is fixed to resolution 12 bits. */ +/* This macro has been kept anyway for compatibility with other */ +/* STM32 families featuring different ADC resolutions. */ #define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ - ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL ))) + ((__AWD_THRESHOLD__) << (0U)) /** * @brief Helper macro to get the value of ADC analog watchdog threshold high @@ -1507,21 +1339,21 @@ typedef struct * ); * @param __ADC_RESOLUTION__ This parameter can be one of the following values: * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF * @retval Value between Min_Data=0x000 and Max_Data=0xFFF */ +/* Note: On this STM32 serie, ADC is fixed to resolution 12 bits. */ +/* This macro has been kept anyway for compatibility with other */ +/* STM32 families featuring different ADC resolutions. */ #define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ - ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL ))) + (__AWD_THRESHOLD_12_BITS__) #if defined(ADC_MULTIMODE_SUPPORT) /** * @brief Helper macro to get the ADC multimode conversion data of ADC master * or ADC slave from raw value with both ADC conversion data concatenated. * @note This macro is intended to be used when multimode transfer by DMA - * is enabled: refer to function @ref LL_ADC_SetMultiDMATransfer(). + * is enabled. * In this case the transferred data need to processed with this macro * to separate the conversion data of ADC master and ADC slave. * @param __ADC_MULTI_MASTER_SLAVE__ This parameter can be one of the following values: @@ -1531,7 +1363,7 @@ typedef struct * @retval Value between Min_Data=0x000 and Max_Data=0xFFF */ #define __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(__ADC_MULTI_MASTER_SLAVE__, __ADC_MULTI_CONV_DATA__) \ - (((__ADC_MULTI_CONV_DATA__) >> POSITION_VAL((__ADC_MULTI_MASTER_SLAVE__))) & ADC_CDR_RDATA_MST) + (((__ADC_MULTI_CONV_DATA__) >> POSITION_VAL((__ADC_MULTI_MASTER_SLAVE__))) & ADC_DR_DATA) #endif /** @@ -1541,12 +1373,28 @@ typedef struct * - Set parameters common to several ADC instances * - Multimode (for devices with several ADC instances) * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On STM32F1, there is no common ADC instance. + * However, ADC instance ADC1 has a role of common ADC instance + * for ADC1 and ADC2: + * this instance is used to manage internal channels + * and multimode (these features are managed in ADC common + * instances on some other STM32 devices). + * ADC instance ADC3 (if available on the selected device) + * has no ADC common instance. * @param __ADCx__ ADC instance * @retval ADC common register instance */ #if defined(ADC1) && defined(ADC2) && defined(ADC3) #define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ - (ADC123_COMMON) + ((((__ADCx__) == ADC1) || ((__ADCx__) == ADC2)) \ + ? ( \ + (ADC12_COMMON) \ + ) \ + : \ + ( \ + (0U) \ + ) \ + ) #elif defined(ADC1) && defined(ADC2) #define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ (ADC12_COMMON) @@ -1565,6 +1413,14 @@ typedef struct * @note On devices with only 1 ADC common instance, parameter of this macro * is useless and can be ignored (parameter kept for compatibility * with devices featuring several ADC common instances). + * @note On STM32F1, there is no common ADC instance. + * However, ADC instance ADC1 has a role of common ADC instance + * for ADC1 and ADC2: + * this instance is used to manage internal channels + * and multimode (these features are managed in ADC common + * instances on some other STM32 devices). + * ADC instance ADC3 (if available on the selected device) + * has no ADC common instance. * @param __ADCXY_COMMON__ ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval Value "0" if all ADC instances sharing the same ADC common instance @@ -1574,16 +1430,23 @@ typedef struct */ #if defined(ADC1) && defined(ADC2) && defined(ADC3) #define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ - (LL_ADC_IsEnabled(ADC1) | \ - LL_ADC_IsEnabled(ADC2) | \ - LL_ADC_IsEnabled(ADC3) ) + (((__ADCXY_COMMON__) == ADC12_COMMON) \ + ? ( \ + (LL_ADC_IsEnabled(ADC1) | \ + LL_ADC_IsEnabled(ADC2) ) \ + ) \ + : \ + ( \ + LL_ADC_IsEnabled(ADC3) \ + ) \ + ) #elif defined(ADC1) && defined(ADC2) #define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ (LL_ADC_IsEnabled(ADC1) | \ LL_ADC_IsEnabled(ADC2) ) #else #define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ - (LL_ADC_IsEnabled(ADC1)) + LL_ADC_IsEnabled(ADC1) #endif /** @@ -1594,52 +1457,22 @@ typedef struct * (refer to reference manual). * @param __ADC_RESOLUTION__ This parameter can be one of the following values: * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B * @retval ADC conversion data equivalent voltage value (unit: mVolt) */ #define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ - (0xFFFU >> ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL))) + (0xFFFU) -/** - * @brief Helper macro to convert the ADC conversion data from - * a resolution to another resolution. - * @param __DATA__ ADC conversion data to be converted - * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted - * This parameter can be one of the following values: - * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B - * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion - * This parameter can be one of the following values: - * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B - * @retval ADC conversion data to the requested resolution - */ -#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__, __ADC_RESOLUTION_CURRENT__, __ADC_RESOLUTION_TARGET__) \ - (((__DATA__) \ - << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL))) \ - >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL)) \ - ) /** * @brief Helper macro to calculate the voltage (unit: mVolt) * corresponding to a ADC conversion data (unit: digital value). - * @note Analog reference voltage (Vref+) must be either known from - * user board environment or can be calculated using ADC measurement - * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). - * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit mV) + * @note Analog reference voltage (Vref+) must be known from + * user board environment or can be calculated using ADC measurement. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) * (unit: digital value). * @param __ADC_RESOLUTION__ This parameter can be one of the following values: * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B * @retval ADC conversion data equivalent voltage value (unit: mVolt) */ #define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ @@ -1649,101 +1482,6 @@ typedef struct / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ ) -/** - * @brief Helper macro to calculate analog reference voltage (Vref+) - * (unit: mVolt) from ADC conversion data of internal voltage - * reference VrefInt. - * @note Computation is using VrefInt calibration value - * stored in system memory for each device during production. - * @note This voltage depends on user board environment: voltage level - * connected to pin Vref+. - * On devices with small package, the pin Vref+ is not present - * and internally bonded to pin Vdda. - * @note On this STM32 series, calibration data of internal voltage reference - * VrefInt corresponds to a resolution of 12 bits, - * this is the recommended ADC resolution to convert voltage of - * internal voltage reference VrefInt. - * Otherwise, this macro performs the processing to scale - * ADC conversion data to 12 bits. - * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) - * of internal voltage reference VrefInt (unit: digital value). - * @param __ADC_RESOLUTION__ This parameter can be one of the following values: - * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B - * @retval Analog reference voltage (unit: mV) - */ -#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ - __ADC_RESOLUTION__) \ - (((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ - / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ - (__ADC_RESOLUTION__), \ - LL_ADC_RESOLUTION_12B)) - -/* Note: On device STM32F4x9, calibration parameter TS_CAL2 is not available. */ -/* Therefore, helper macro __LL_ADC_CALC_TEMPERATURE() is not available.*/ -/* Use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). */ -#if !defined(STM32F469) && !defined(STM32F479xx) && !defined(STM32F429xx) && !defined(STM32F439xx) -/** - * @brief Helper macro to calculate the temperature (unit: degree Celsius) - * from ADC conversion data of internal temperature sensor. - * @note Computation is using temperature sensor calibration values - * stored in system memory for each device during production. - * @note Calculation formula: - * Temperature = ((TS_ADC_DATA - TS_CAL1) - * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) - * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP - * with TS_ADC_DATA = temperature sensor raw data measured by ADC - * Avg_Slope = (TS_CAL2 - TS_CAL1) - * / (TS_CAL2_TEMP - TS_CAL1_TEMP) - * TS_CAL1 = equivalent TS_ADC_DATA at temperature - * TEMP_DEGC_CAL1 (calibrated in factory) - * TS_CAL2 = equivalent TS_ADC_DATA at temperature - * TEMP_DEGC_CAL2 (calibrated in factory) - * Caution: Calculation relevancy under reserve that calibration - * parameters are correct (address and data). - * To calculate temperature using temperature sensor - * datasheet typical values (generic values less, therefore - * less accurate than calibrated values), - * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). - * @note As calculation input, the analog reference voltage (Vref+) must be - * defined as it impacts the ADC LSB equivalent voltage. - * @note Analog reference voltage (Vref+) must be either known from - * user board environment or can be calculated using ADC measurement - * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). - * @note On this STM32 series, calibration data of temperature sensor - * corresponds to a resolution of 12 bits, - * this is the recommended ADC resolution to convert voltage of - * temperature sensor. - * Otherwise, this macro performs the processing to scale - * ADC conversion data to 12 bits. - * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit mV) - * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal - * temperature sensor (unit: digital value). - * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature - * sensor voltage has been measured. - * This parameter can be one of the following values: - * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B - * @retval Temperature (unit: degree Celsius) - */ -#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ - __TEMPSENSOR_ADC_DATA__,\ - __ADC_RESOLUTION__) \ - (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \ - (__ADC_RESOLUTION__), \ - LL_ADC_RESOLUTION_12B) \ - * (__VREFANALOG_VOLTAGE__)) \ - / TEMPSENSOR_CAL_VREFANALOG) \ - - (int32_t) *TEMPSENSOR_CAL1_ADDR) \ - ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \ - ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \ - ) + TEMPSENSOR_CAL1_TEMP \ - ) -#endif /** * @brief Helper macro to calculate the temperature (unit: degree Celsius) @@ -1768,25 +1506,21 @@ typedef struct * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). * @note As calculation input, the analog reference voltage (Vref+) must be * defined as it impacts the ADC LSB equivalent voltage. - * @note Analog reference voltage (Vref+) must be either known from - * user board environment or can be calculated using ADC measurement - * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note Analog reference voltage (Vref+) must be known from + * user board environment or can be calculated using ADC measurement. * @note ADC measurement data must correspond to a resolution of 12bits * (full scale digital value 4095). If not the case, the data must be * preliminarily rescaled to an equivalent resolution of 12 bits. - * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data Temperature sensor slope typical value (unit uV/DegCelsius). - * On STM32F4, refer to device datasheet parameter "Avg_Slope". - * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit mV). - * On STM32F4, refer to device datasheet parameter "V25". - * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit mV) - * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit mV) - * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit digital value). + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32F1, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32F1, refer to device datasheet parameter "V25". + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. * This parameter can be one of the following values: * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B * @retval Temperature (unit: degree Celsius) */ #define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ @@ -1847,9 +1581,14 @@ typedef struct * use a different data register outside of ADC instance scope * (common data register). This macro manages this register difference, * only ADC instance has to be set as parameter. - * @rmtoll DR RDATA LL_ADC_DMA_GetRegAddr\n - * CDR RDATA_MST LL_ADC_DMA_GetRegAddr\n - * CDR RDATA_SLV LL_ADC_DMA_GetRegAddr + * @note On STM32F1, only ADC instances ADC1 and ADC3 have DMA transfer + * capability, not ADC2 (ADC2 and ADC3 instances not available on + * all devices). + * @note On STM32F1, multimode can be used only with ADC1 and ADC2, not ADC3. + * Therefore, the corresponding parameter of data transfer + * for multimode can be used only with ADC1 and ADC2. + * (ADC2 and ADC3 instances not available on all devices). + * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr * @param ADCx ADC instance * @param Register This parameter can be one of the following values: * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA @@ -1861,7 +1600,7 @@ typedef struct #if defined(ADC_MULTIMODE_SUPPORT) __STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register) { - uint32_t data_reg_addr = 0UL; + uint32_t data_reg_addr = 0U; if (Register == LL_ADC_DMA_REG_REGULAR_DATA) { @@ -1870,8 +1609,8 @@ __STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Regis } else /* (Register == LL_ADC_DMA_REG_REGULAR_DATA_MULTI) */ { - /* Retrieve address of register CDR */ - data_reg_addr = (uint32_t)&((__LL_ADC_COMMON_INSTANCE(ADCx))->CDR); + /* Retrieve address of register of multimode data */ + data_reg_addr = (uint32_t)&(ADC12_COMMON->DR); } return data_reg_addr; @@ -1892,39 +1631,6 @@ __STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Regis * @{ */ -/** - * @brief Set parameter common to several ADC: Clock source and prescaler. - * @rmtoll CCR ADCPRE LL_ADC_SetCommonClock - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @param CommonClock This parameter can be one of the following values: - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV6 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV8 - * @retval None - */ -__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) -{ - MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE, CommonClock); -} - -/** - * @brief Get parameter common to several ADC: Clock source and prescaler. - * @rmtoll CCR ADCPRE LL_ADC_GetCommonClock - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV6 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV8 - */ -__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE)); -} - /** * @brief Set parameter common to several ADC: measurement path to internal * channels (VrefInt, temperature sensor, ...). @@ -1936,26 +1642,23 @@ __STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) * a delay is required for internal voltage reference and * temperature sensor stabilization time. * Refer to device datasheet. - * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. * Refer to literal @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US. * @note ADC internal channel sampling time constraint: * For ADC conversion of internal channels, * a sampling time minimum value is required. * Refer to device datasheet. - * @rmtoll CCR TSVREFE LL_ADC_SetCommonPathInternalCh\n - * CCR VBATE LL_ADC_SetCommonPathInternalCh + * @rmtoll CR2 TSVREFE LL_ADC_SetCommonPathInternalCh * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @param PathInternal This parameter can be a combination of the following values: * @arg @ref LL_ADC_PATH_INTERNAL_NONE * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR - * @arg @ref LL_ADC_PATH_INTERNAL_VBAT * @retval None */ __STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) { - MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_TSVREFE | ADC_CCR_VBATE, PathInternal); + MODIFY_REG(ADCxy_COMMON->CR2, (ADC_CR2_TSVREFE), PathInternal); } /** @@ -1964,19 +1667,17 @@ __STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_CO * @note One or several values can be selected. * Example: (LL_ADC_PATH_INTERNAL_VREFINT | * LL_ADC_PATH_INTERNAL_TEMPSENSOR) - * @rmtoll CCR TSVREFE LL_ADC_GetCommonPathInternalCh\n - * CCR VBATE LL_ADC_GetCommonPathInternalCh + * @rmtoll CR2 TSVREFE LL_ADC_GetCommonPathInternalCh * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval Returned value can be a combination of the following values: * @arg @ref LL_ADC_PATH_INTERNAL_NONE * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR - * @arg @ref LL_ADC_PATH_INTERNAL_VBAT */ __STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON) { - return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_TSVREFE | ADC_CCR_VBATE)); + return (uint32_t)(READ_BIT(ADCxy_COMMON->CR2, ADC_CR2_TSVREFE)); } /** @@ -1987,41 +1688,6 @@ __STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCx * @{ */ -/** - * @brief Set ADC resolution. - * Refer to reference manual for alignments formats - * dependencies to ADC resolutions. - * @rmtoll CR1 RES LL_ADC_SetResolution - * @param ADCx ADC instance - * @param Resolution This parameter can be one of the following values: - * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B - * @retval None - */ -__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) -{ - MODIFY_REG(ADCx->CR1, ADC_CR1_RES, Resolution); -} - -/** - * @brief Get ADC resolution. - * Refer to reference manual for alignments formats - * dependencies to ADC resolutions. - * @rmtoll CR1 RES LL_ADC_GetResolution - * @param ADCx ADC instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_RESOLUTION_12B - * @arg @ref LL_ADC_RESOLUTION_10B - * @arg @ref LL_ADC_RESOLUTION_8B - * @arg @ref LL_ADC_RESOLUTION_6B - */ -__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) -{ - return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_RES)); -} - /** * @brief Set ADC conversion data alignment. * @note Refer to reference manual for alignments formats @@ -2116,36 +1782,39 @@ __STATIC_INLINE uint32_t LL_ADC_GetSequencersScanMode(ADC_TypeDef *ADCx) * @brief Set ADC group regular conversion trigger source: * internal (SW start) or from external IP (timer event, * external interrupt line). - * @note On this STM32 series, setting of external trigger edge is performed - * using function @ref LL_ADC_REG_StartConversionExtTrig(). + * @note On this STM32 serie, external trigger is set with trigger polarity: + * rising edge (only trigger polarity available on this STM32 serie). * @note Availability of parameters of trigger sources from timer * depends on timers availability on the selected device. - * @rmtoll CR2 EXTSEL LL_ADC_REG_SetTriggerSource\n - * CR2 EXTEN LL_ADC_REG_SetTriggerSource + * @rmtoll CR2 EXTSEL LL_ADC_REG_SetTriggerSource * @param ADCx ADC instance * @param TriggerSource This parameter can be one of the following values: * @arg @ref LL_ADC_REG_TRIG_SOFTWARE - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH4 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH3 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO - * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO (2)(4) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO_ADC3 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_CH1 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH1 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH3 (3) + * + * (1) On STM32F1, parameter available on all ADC instances: ADC1, ADC2, ADC3 (for ADC instances ADCx available on the selected device).\n + * (2) On STM32F1, parameter available only on ADC instances: ADC1, ADC2 (for ADC instances ADCx available on the selected device).\n + * (3) On STM32F1, parameter available only on ADC instances: ADC3 (for ADC instances ADCx available on the selected device).\n + * (4) On STM32F1, parameter available only on high-density and XL-density devices. A remap of trigger must be done at top level (refer to AFIO peripheral). * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) { -/* Note: On this STM32 series, ADC group regular external trigger edge */ +/* Note: On this STM32 serie, ADC group regular external trigger edge */ /* is used to perform a ADC conversion start. */ /* This function does not set external trigger edge. */ /* This feature is set using function */ @@ -2165,42 +1834,34 @@ __STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t Tri * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. * @note Availability of parameters of trigger sources from timer * depends on timers availability on the selected device. - * @rmtoll CR2 EXTSEL LL_ADC_REG_GetTriggerSource\n - * CR2 EXTEN LL_ADC_REG_GetTriggerSource + * @rmtoll CR2 EXTSEL LL_ADC_REG_GetTriggerSource * @param ADCx ADC instance * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_REG_TRIG_SOFTWARE - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH4 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH3 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO - * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO (2)(4) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO_ADC3 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_CH1 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH1 (3) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH3 (3) + * + * (1) On STM32F1, parameter available on all ADC instances: ADC1, ADC2, ADC3 (for ADC instances ADCx available on the selected device).\n + * (2) On STM32F1, parameter available only on ADC instances: ADC1, ADC2 (for ADC instances ADCx available on the selected device).\n + * (3) On STM32F1, parameter available only on ADC instances: ADC3 (for ADC instances ADCx available on the selected device).\n + * (4) On STM32F1, parameter available only on high-density and XL-density devices. A remap of trigger must be done at top level (refer to AFIO peripheral). */ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) { - uint32_t TriggerSource = READ_BIT(ADCx->CR2, ADC_CR2_EXTSEL | ADC_CR2_EXTEN); - - /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ - /* corresponding to ADC_CR2_EXTEN {0; 1; 2; 3}. */ - uint32_t ShiftExten = ((TriggerSource & ADC_CR2_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); - - /* Set bitfield corresponding to ADC_CR2_EXTEN and ADC_CR2_EXTSEL */ - /* to match with triggers literals definition. */ - return ((TriggerSource - & (ADC_REG_TRIG_SOURCE_MASK << ShiftExten) & ADC_CR2_EXTSEL) - | ((ADC_REG_TRIG_EDGE_MASK << ShiftExten) & ADC_CR2_EXTEN) - ); + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EXTSEL)); } /** @@ -2209,31 +1870,14 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) * @note In case of group regular trigger source set to external trigger, * to determine which peripheral is selected as external trigger, * use function @ref LL_ADC_REG_GetTriggerSource(). - * @rmtoll CR2 EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @rmtoll CR2 EXTSEL LL_ADC_REG_IsTriggerSourceSWStart * @param ADCx ADC instance * @retval Value "0" if trigger source external trigger * Value "1" if trigger source SW start. */ __STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) { - return (READ_BIT(ADCx->CR2, ADC_CR2_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTEN)); -} - -/** - * @brief Get ADC group regular conversion trigger polarity. - * @note Applicable only for trigger source set to external trigger. - * @note On this STM32 series, setting of external trigger edge is performed - * using function @ref LL_ADC_REG_StartConversionExtTrig(). - * @rmtoll CR2 EXTEN LL_ADC_REG_GetTriggerEdge - * @param ADCx ADC instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_REG_TRIG_EXT_RISING - * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING - * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING - */ -__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) -{ - return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EXTEN)); + return (READ_BIT(ADCx->CR2, ADC_CR2_EXTSEL) == (LL_ADC_REG_TRIG_SOFTWARE)); } @@ -2264,7 +1908,7 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) * highest channel number). * Sequencer ranks are selected using * function "LL_ADC_REG_SetSequencerChannels()". - * @note On this STM32 series, group regular sequencer configuration + * @note On this STM32 serie, group regular sequencer configuration * is conditioned to ADC instance sequencer mode. * If ADC instance sequencer mode is disabled, sequencers of * all groups (group regular, group injected) can be configured @@ -2325,7 +1969,7 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t S * highest channel number). * Sequencer ranks are selected using * function "LL_ADC_REG_SetSequencerChannels()". - * @note On this STM32 series, group regular sequencer configuration + * @note On this STM32 serie, group regular sequencer configuration * is conditioned to ADC instance sequencer mode. * If ADC instance sequencer mode is disabled, sequencers of * all groups (group regular, group injected) can be configured @@ -2415,13 +2059,13 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) * @note This function performs configuration of: * - Channels ordering into each rank of scan sequence: * whatever channel can be placed into whatever rank. - * @note On this STM32 series, ADC group regular sequencer is + * @note On this STM32 serie, ADC group regular sequencer is * fully configurable: sequencer length and each rank * affectation to a channel are configurable. * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). * @note Depending on devices and packages, some channels may not be available. * Refer to device datasheet for channels availability. - * @note On this STM32 series, to measure internal channels (VrefInt, + * @note On this STM32 serie, to measure internal channels (VrefInt, * TempSensor, ...), measurement paths to internal channels must be * enabled separately. * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). @@ -2478,13 +2122,10 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) @@ -2503,7 +2144,7 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra /** * @brief Get ADC group regular sequence: channel on the selected * scan sequence rank. - * @note On this STM32 series, ADC group regular sequencer is + * @note On this STM32 serie, ADC group regular sequencer is * fully configurable: sequencer length and each rank * affectation to a channel are configurable. * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). @@ -2573,13 +2214,10 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n + * (1) On STM32F1, parameter available only on ADC instance: ADC1.\n * (1) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). @@ -2649,22 +2287,18 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) * when DMA transfers size will be reached, DMA will stop transfers of * ADC conversions data ADC will raise an overrun error * (overrun flag and interruption if enabled). - * @note For devices with several ADC instances: ADC multimode DMA - * settings are available using function @ref LL_ADC_SetMultiDMATransfer(). * @note To configure DMA source address (peripheral address), * use function @ref LL_ADC_DMA_GetRegAddr(). - * @rmtoll CR2 DMA LL_ADC_REG_SetDMATransfer\n - * CR2 DDS LL_ADC_REG_SetDMATransfer + * @rmtoll CR2 DMA LL_ADC_REG_SetDMATransfer * @param ADCx ADC instance * @param DMATransfer This parameter can be one of the following values: * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE - * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) { - MODIFY_REG(ADCx->CR2, ADC_CR2_DMA | ADC_CR2_DDS, DMATransfer); + MODIFY_REG(ADCx->CR2, ADC_CR2_DMA, DMATransfer); } /** @@ -2685,58 +2319,17 @@ __STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATr * when DMA transfers size will be reached, DMA will stop transfers of * ADC conversions data ADC will raise an overrun error * (overrun flag and interruption if enabled). - * @note For devices with several ADC instances: ADC multimode DMA - * settings are available using function @ref LL_ADC_GetMultiDMATransfer(). * @note To configure DMA source address (peripheral address), * use function @ref LL_ADC_DMA_GetRegAddr(). - * @rmtoll CR2 DMA LL_ADC_REG_GetDMATransfer\n - * CR2 DDS LL_ADC_REG_GetDMATransfer + * @rmtoll CR2 DMA LL_ADC_REG_GetDMATransfer * @param ADCx ADC instance * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE - * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED */ __STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) { - return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_DMA | ADC_CR2_DDS)); -} - -/** - * @brief Specify which ADC flag between EOC (end of unitary conversion) - * or EOS (end of sequence conversions) is used to indicate - * the end of conversion. - * @note This feature is aimed to be set when using ADC with - * programming model by polling or interruption - * (programming model by DMA usually uses DMA interruptions - * to indicate end of conversion and data transfer). - * @note For ADC group injected, end of conversion (flag&IT) is raised - * only at the end of the sequence. - * @rmtoll CR2 EOCS LL_ADC_REG_SetFlagEndOfConversion - * @param ADCx ADC instance - * @param EocSelection This parameter can be one of the following values: - * @arg @ref LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV - * @arg @ref LL_ADC_REG_FLAG_EOC_UNITARY_CONV - * @retval None - */ -__STATIC_INLINE void LL_ADC_REG_SetFlagEndOfConversion(ADC_TypeDef *ADCx, uint32_t EocSelection) -{ - MODIFY_REG(ADCx->CR2, ADC_CR2_EOCS, EocSelection); -} - -/** - * @brief Get which ADC flag between EOC (end of unitary conversion) - * or EOS (end of sequence conversions) is used to indicate - * the end of conversion. - * @rmtoll CR2 EOCS LL_ADC_REG_GetFlagEndOfConversion - * @param ADCx ADC instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV - * @arg @ref LL_ADC_REG_FLAG_EOC_UNITARY_CONV - */ -__STATIC_INLINE uint32_t LL_ADC_REG_GetFlagEndOfConversion(ADC_TypeDef *ADCx) -{ - return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EOCS)); + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_DMA)); } /** @@ -2751,36 +2344,38 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetFlagEndOfConversion(ADC_TypeDef *ADCx) * @brief Set ADC group injected conversion trigger source: * internal (SW start) or from external IP (timer event, * external interrupt line). - * @note On this STM32 series, setting of external trigger edge is performed - * using function @ref LL_ADC_INJ_StartConversionExtTrig(). + * @note On this STM32 serie, external trigger is set with trigger polarity: + * rising edge (only trigger polarity available on this STM32 serie). * @note Availability of parameters of trigger sources from timer * depends on timers availability on the selected device. - * @rmtoll CR2 JEXTSEL LL_ADC_INJ_SetTriggerSource\n - * CR2 JEXTEN LL_ADC_INJ_SetTriggerSource + * @rmtoll CR2 JEXTSEL LL_ADC_INJ_SetTriggerSource * @param ADCx ADC instance * @param TriggerSource This parameter can be one of the following values: * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH2 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH1 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH2 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH2 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH3 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO (1) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 (1) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4 (2)(4) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4_ADC3 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH2 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_TRGO (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_CH4 (3) + * + * (1) On STM32F1, parameter available on all ADC instances: ADC1, ADC2, ADC3 (for ADC instances ADCx available on the selected device).\n + * (2) On STM32F1, parameter available only on ADC instances: ADC1, ADC2 (for ADC instances ADCx available on the selected device).\n + * (3) On STM32F1, parameter available only on ADC instances: ADC3 (for ADC instances ADCx available on the selected device).\n + * (4) On STM32F1, parameter available only on high-density and XL-density devices. A remap of trigger must be done at top level (refer to AFIO peripheral). * @retval None */ __STATIC_INLINE void LL_ADC_INJ_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) { -/* Note: On this STM32 series, ADC group injected external trigger edge */ +/* Note: On this STM32 serie, ADC group injected external trigger edge */ /* is used to perform a ADC conversion start. */ /* This function does not set external trigger edge. */ /* This feature is set using function */ @@ -2800,42 +2395,33 @@ __STATIC_INLINE void LL_ADC_INJ_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t Tri * use function @ref LL_ADC_INJ_IsTriggerSourceSWStart. * @note Availability of parameters of trigger sources from timer * depends on timers availability on the selected device. - * @rmtoll CR2 JEXTSEL LL_ADC_INJ_GetTriggerSource\n - * CR2 JEXTEN LL_ADC_INJ_GetTriggerSource + * @rmtoll CR2 JEXTSEL LL_ADC_INJ_GetTriggerSource * @param ADCx ADC instance * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH2 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH1 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH2 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_TRGO - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH2 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH3 - * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4 - * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO (1) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 (1) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 (2) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4 (2)(4) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4_ADC3 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH2 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4 (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_TRGO (3) + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_CH4 (3) + * + * (1) On STM32F1, parameter available on all ADC instances: ADC1, ADC2, ADC3 (for ADC instances ADCx available on the selected device).\n + * (2) On STM32F1, parameter available only on ADC instances: ADC1, ADC2 (for ADC instances ADCx available on the selected device).\n + * (3) On STM32F1, parameter available only on ADC instances: ADC3 (for ADC instances ADCx available on the selected device).\n + * (4) On STM32F1, parameter available only on high-density and XL-density devices. A remap of trigger must be done at top level (refer to AFIO peripheral). */ __STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(ADC_TypeDef *ADCx) { - uint32_t TriggerSource = READ_BIT(ADCx->CR2, ADC_CR2_JEXTSEL | ADC_CR2_JEXTEN); - - /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ - /* corresponding to ADC_CR2_JEXTEN {0; 1; 2; 3}. */ - uint32_t ShiftExten = ((TriggerSource & ADC_CR2_JEXTEN) >> (ADC_INJ_TRIG_EXTEN_BITOFFSET_POS - 2UL)); - - /* Set bitfield corresponding to ADC_CR2_JEXTEN and ADC_CR2_JEXTSEL */ - /* to match with triggers literals definition. */ - return ((TriggerSource - & (ADC_INJ_TRIG_SOURCE_MASK << ShiftExten) & ADC_CR2_JEXTSEL) - | ((ADC_INJ_TRIG_EDGE_MASK << ShiftExten) & ADC_CR2_JEXTEN) - ); + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_JEXTSEL)); } /** @@ -2844,29 +2430,14 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(ADC_TypeDef *ADCx) * @note In case of group injected trigger source set to external trigger, * to determine which peripheral is selected as external trigger, * use function @ref LL_ADC_INJ_GetTriggerSource. - * @rmtoll CR2 JEXTEN LL_ADC_INJ_IsTriggerSourceSWStart + * @rmtoll CR2 JEXTSEL LL_ADC_INJ_IsTriggerSourceSWStart * @param ADCx ADC instance * @retval Value "0" if trigger source external trigger * Value "1" if trigger source SW start. */ __STATIC_INLINE uint32_t LL_ADC_INJ_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) { - return (READ_BIT(ADCx->CR2, ADC_CR2_JEXTEN) == (LL_ADC_INJ_TRIG_SOFTWARE & ADC_CR2_JEXTEN)); -} - -/** - * @brief Get ADC group injected conversion trigger polarity. - * Applicable only for trigger source set to external trigger. - * @rmtoll CR2 JEXTEN LL_ADC_INJ_GetTriggerEdge - * @param ADCx ADC instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING - * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING - * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING - */ -__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(ADC_TypeDef *ADCx) -{ - return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_JEXTEN)); + return (READ_BIT(ADCx->CR2, ADC_CR2_JEXTSEL) == LL_ADC_INJ_TRIG_SOFTWARE); } /** @@ -2875,7 +2446,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(ADC_TypeDef *ADCx) * - Sequence length: Number of ranks in the scan sequence. * - Sequence direction: Unless specified in parameters, sequencer * scan direction is forward (from rank 1 to rank n). - * @note On this STM32 series, group injected sequencer configuration + * @note On this STM32 serie, group injected sequencer configuration * is conditioned to ADC instance sequencer mode. * If ADC instance sequencer mode is disabled, sequencers of * all groups (group regular, group injected) can be configured @@ -2903,7 +2474,7 @@ __STATIC_INLINE void LL_ADC_INJ_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t S * - Sequence length: Number of ranks in the scan sequence. * - Sequence direction: Unless specified in parameters, sequencer * scan direction is forward (from rank 1 to rank n). - * @note On this STM32 series, group injected sequencer configuration + * @note On this STM32 serie, group injected sequencer configuration * is conditioned to ADC instance sequencer mode. * If ADC instance sequencer mode is disabled, sequencers of * all groups (group regular, group injected) can be configured @@ -2962,7 +2533,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx) * sequence rank. * @note Depending on devices and packages, some channels may not be available. * Refer to device datasheet for channels availability. - * @note On this STM32 series, to measure internal channels (VrefInt, + * @note On this STM32 serie, to measure internal channels (VrefInt, * TempSensor, ...), measurement paths to internal channels must be * enabled separately. * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). @@ -2995,13 +2566,10 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval None */ __STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) @@ -3010,11 +2578,11 @@ __STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra /* in register depending on parameter "Rank". */ /* Parameters "Rank" and "Channel" are used with masks because containing */ /* other bits reserved for other purpose. */ - uint32_t tmpreg1 = (READ_BIT(ADCx->JSQR, ADC_JSQR_JL) >> ADC_JSQR_JL_Pos) + 1UL; + uint32_t tmpreg1 = (READ_BIT(ADCx->JSQR, ADC_JSQR_JL) >> ADC_JSQR_JL_Pos) + 1U; MODIFY_REG(ADCx->JSQR, - ADC_CHANNEL_ID_NUMBER_MASK << (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1))), - (Channel & ADC_CHANNEL_ID_NUMBER_MASK) << (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1)))); + ADC_CHANNEL_ID_NUMBER_MASK << (5U * (uint8_t)(((Rank) + 3U) - (tmpreg1))), + (Channel & ADC_CHANNEL_ID_NUMBER_MASK) << (5U * (uint8_t)(((Rank) + 3U) - (tmpreg1)))); } /** @@ -3062,24 +2630,21 @@ __STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n + * (1) On STM32F1, parameter available only on ADC instance: ADC1.\n * (1) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). */ __STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) { - uint32_t tmpreg1 = (READ_BIT(ADCx->JSQR, ADC_JSQR_JL) >> ADC_JSQR_JL_Pos) + 1UL; + uint32_t tmpreg1 = (READ_BIT(ADCx->JSQR, ADC_JSQR_JL) >> ADC_JSQR_JL_Pos) + 1U; return (uint32_t)(READ_BIT(ADCx->JSQR, - ADC_CHANNEL_ID_NUMBER_MASK << (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1)))) - >> (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1))) + ADC_CHANNEL_ID_NUMBER_MASK << (5U * (uint8_t)(((Rank) + 3U) - (tmpreg1)))) + >> (5U * (uint8_t)(((Rank) + 3U) - (tmpreg1))) ); } @@ -3211,13 +2776,12 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetOffset(ADC_TypeDef *ADCx, uint32_t Rank) * TS_temp, ...). * @note Conversion time is the addition of sampling time and processing time. * Refer to reference manual for ADC processing time of - * this STM32 series. + * this STM32 serie. * @note In case of ADC conversion of internal channel (VrefInt, * temperature sensor, ...), a sampling time minimum value * is required. * Refer to device datasheet. - * @rmtoll SMPR1 SMP18 LL_ADC_SetChannelSamplingTime\n - * SMPR1 SMP17 LL_ADC_SetChannelSamplingTime\n + * @rmtoll SMPR1 SMP17 LL_ADC_SetChannelSamplingTime\n * SMPR1 SMP16 LL_ADC_SetChannelSamplingTime\n * SMPR1 SMP15 LL_ADC_SetChannelSamplingTime\n * SMPR1 SMP14 LL_ADC_SetChannelSamplingTime\n @@ -3255,22 +2819,19 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetOffset(ADC_TypeDef *ADCx, uint32_t Rank) * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @param SamplingTime This parameter can be one of the following values: - * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_15CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_56CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_84CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_112CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_144CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_480CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_13CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_41CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_55CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_71CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_239CYCLES_5 * @retval None */ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTime) @@ -3293,9 +2854,8 @@ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t C * of channel mapped on ADC group regular or injected. * @note Conversion time is the addition of sampling time and processing time. * Refer to reference manual for ADC processing time of - * this STM32 series. - * @rmtoll SMPR1 SMP18 LL_ADC_GetChannelSamplingTime\n - * SMPR1 SMP17 LL_ADC_GetChannelSamplingTime\n + * this STM32 serie. + * @rmtoll SMPR1 SMP17 LL_ADC_GetChannelSamplingTime\n * SMPR1 SMP16 LL_ADC_GetChannelSamplingTime\n * SMPR1 SMP15 LL_ADC_GetChannelSamplingTime\n * SMPR1 SMP14 LL_ADC_GetChannelSamplingTime\n @@ -3333,22 +2893,19 @@ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t C * @arg @ref LL_ADC_CHANNEL_15 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 - * @arg @ref LL_ADC_CHANNEL_18 * @arg @ref LL_ADC_CHANNEL_VREFINT (1) - * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(2) - * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_15CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_56CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_84CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_112CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_144CYCLES - * @arg @ref LL_ADC_SAMPLINGTIME_480CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_13CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_41CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_55CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_71CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_239CYCLES_5 */ __STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) { @@ -3377,7 +2934,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32 * @note In case of need to define a single channel to monitor * with analog watchdog from sequencer channel definition, * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). - * @note On this STM32 series, there is only 1 kind of analog watchdog + * @note On this STM32 serie, there is only 1 kind of analog watchdog * instance: * - AWD standard (instance AWD1): * - channels monitored: can monitor 1 channel or all channels. @@ -3447,21 +3004,14 @@ __STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32 * @arg @ref LL_ADC_AWD_CHANNEL_17_REG * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG - * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (1) * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (1) * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (1) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (1)(2) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (1)(2) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1)(2) - * @arg @ref LL_ADC_AWD_CH_VBAT_REG (1) - * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (1) - * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1) * - * (1) On STM32F4, parameter available only on ADC instance: ADC1.\n - * (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. + * (1) On STM32F1, parameter available only on ADC instance: ADC1. * @retval None */ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDChannelGroup) @@ -3486,7 +3036,7 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). * Applicable only when the analog watchdog is set to monitor * one channel. - * @note On this STM32 series, there is only 1 kind of analog watchdog + * @note On this STM32 serie, there is only 1 kind of analog watchdog * instance: * - AWD standard (instance AWD1): * - channels monitored: can monitor 1 channel or all channels. @@ -3556,9 +3106,6 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t * @arg @ref LL_ADC_AWD_CHANNEL_17_REG * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG - * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ */ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx) { @@ -3568,10 +3115,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx) /** * @brief Set ADC analog watchdog threshold value of threshold * high or low. - * @note In case of ADC resolution different of 12 bits, - * analog watchdog thresholds data require a specific shift. - * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). - * @note On this STM32 series, there is only 1 kind of analog watchdog + * @note On this STM32 serie, there is only 1 kind of analog watchdog * instance: * - AWD standard (instance AWD1): * - channels monitored: can monitor 1 channel or all channels. @@ -3584,7 +3128,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx) * @param AWDThresholdsHighLow This parameter can be one of the following values: * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH * @arg @ref LL_ADC_AWD_THRESHOLD_LOW - * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @param AWDThresholdValue: Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None */ __STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow, uint32_t AWDThresholdValue) @@ -3632,29 +3176,25 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_ * @note If multimode configuration: the selected ADC instance is * either master or slave depending on hardware. * Refer to reference manual. - * @rmtoll CCR MULTI LL_ADC_SetMultimode + * @rmtoll CR1 DUALMOD LL_ADC_SetMultimode * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @param Multimode This parameter can be one of the following values: - * @arg @ref LL_ADC_MULTI_INDEPENDENT - * @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT - * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL - * @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT - * @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN - * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM - * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT - * @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT - * @arg @ref LL_ADC_MULTI_TRIPLE_INJ_SIMULT - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIMULT - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_INTERL - * @arg @ref LL_ADC_MULTI_TRIPLE_INJ_ALTERN + * @arg @ref LL_ADC_MULTI_INDEPENDENT + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL_FAST + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL_SLOW + * @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTFAST_INJ_SIM + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTSLOW_INJ_SIM * @retval None */ __STATIC_INLINE void LL_ADC_SetMultimode(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t Multimode) { - MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_MULTI, Multimode); + MODIFY_REG(ADCxy_COMMON->CR1, ADC_CR1_DUALMOD, Multimode); } /** @@ -3663,188 +3203,26 @@ __STATIC_INLINE void LL_ADC_SetMultimode(ADC_Common_TypeDef *ADCxy_COMMON, uint3 * @note If multimode configuration: the selected ADC instance is * either master or slave depending on hardware. * Refer to reference manual. - * @rmtoll CCR MULTI LL_ADC_GetMultimode + * @rmtoll CR1 DUALMOD LL_ADC_GetMultimode * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_MULTI_INDEPENDENT - * @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT - * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL - * @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT - * @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN - * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM - * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT - * @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT - * @arg @ref LL_ADC_MULTI_TRIPLE_INJ_SIMULT - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIMULT - * @arg @ref LL_ADC_MULTI_TRIPLE_REG_INTERL - * @arg @ref LL_ADC_MULTI_TRIPLE_INJ_ALTERN + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL_FAST + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL_SLOW + * @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTFAST_INJ_SIM + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTSLOW_INJ_SIM */ __STATIC_INLINE uint32_t LL_ADC_GetMultimode(ADC_Common_TypeDef *ADCxy_COMMON) { - return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_MULTI)); + return (uint32_t)(READ_BIT(ADCxy_COMMON->CR1, ADC_CR1_DUALMOD)); } -/** - * @brief Set ADC multimode conversion data transfer: no transfer - * or transfer by DMA. - * @note If ADC multimode transfer by DMA is not selected: - * each ADC uses its own DMA channel, with its individual - * DMA transfer settings. - * If ADC multimode transfer by DMA is selected: - * One DMA channel is used for both ADC (DMA of ADC master) - * Specifies the DMA requests mode: - * - Limited mode (One shot mode): DMA transfer requests are stopped - * when number of DMA data transfers (number of - * ADC conversions) is reached. - * This ADC mode is intended to be used with DMA mode non-circular. - * - Unlimited mode: DMA transfer requests are unlimited, - * whatever number of DMA data transfers (number of - * ADC conversions). - * This ADC mode is intended to be used with DMA mode circular. - * @note If ADC DMA requests mode is set to unlimited and DMA is set to - * mode non-circular: - * when DMA transfers size will be reached, DMA will stop transfers of - * ADC conversions data ADC will raise an overrun error - * (overrun flag and interruption if enabled). - * @note How to retrieve multimode conversion data: - * Whatever multimode transfer by DMA setting: using function - * @ref LL_ADC_REG_ReadMultiConversionData32(). - * If ADC multimode transfer by DMA is selected: conversion data - * is a raw data with ADC master and slave concatenated. - * A macro is available to get the conversion data of - * ADC master or ADC slave: see helper macro - * @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). - * @rmtoll CCR MDMA LL_ADC_SetMultiDMATransfer\n - * CCR DDS LL_ADC_SetMultiDMATransfer - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @param MultiDMATransfer This parameter can be one of the following values: - * @arg @ref LL_ADC_MULTI_REG_DMA_EACH_ADC - * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_1 - * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_2 - * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_3 - * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_1 - * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_2 - * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_3 - * @retval None - */ -__STATIC_INLINE void LL_ADC_SetMultiDMATransfer(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiDMATransfer) -{ - MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_DMA | ADC_CCR_DDS, MultiDMATransfer); -} - -/** - * @brief Get ADC multimode conversion data transfer: no transfer - * or transfer by DMA. - * @note If ADC multimode transfer by DMA is not selected: - * each ADC uses its own DMA channel, with its individual - * DMA transfer settings. - * If ADC multimode transfer by DMA is selected: - * One DMA channel is used for both ADC (DMA of ADC master) - * Specifies the DMA requests mode: - * - Limited mode (One shot mode): DMA transfer requests are stopped - * when number of DMA data transfers (number of - * ADC conversions) is reached. - * This ADC mode is intended to be used with DMA mode non-circular. - * - Unlimited mode: DMA transfer requests are unlimited, - * whatever number of DMA data transfers (number of - * ADC conversions). - * This ADC mode is intended to be used with DMA mode circular. - * @note If ADC DMA requests mode is set to unlimited and DMA is set to - * mode non-circular: - * when DMA transfers size will be reached, DMA will stop transfers of - * ADC conversions data ADC will raise an overrun error - * (overrun flag and interruption if enabled). - * @note How to retrieve multimode conversion data: - * Whatever multimode transfer by DMA setting: using function - * @ref LL_ADC_REG_ReadMultiConversionData32(). - * If ADC multimode transfer by DMA is selected: conversion data - * is a raw data with ADC master and slave concatenated. - * A macro is available to get the conversion data of - * ADC master or ADC slave: see helper macro - * @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). - * @rmtoll CCR MDMA LL_ADC_GetMultiDMATransfer\n - * CCR DDS LL_ADC_GetMultiDMATransfer - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_MULTI_REG_DMA_EACH_ADC - * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_1 - * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_2 - * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_3 - * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_1 - * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_2 - * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_3 - */ -__STATIC_INLINE uint32_t LL_ADC_GetMultiDMATransfer(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DMA | ADC_CCR_DDS)); -} - -/** - * @brief Set ADC multimode delay between 2 sampling phases. - * @note The sampling delay range depends on ADC resolution: - * - ADC resolution 12 bits can have maximum delay of 12 cycles. - * - ADC resolution 10 bits can have maximum delay of 10 cycles. - * - ADC resolution 8 bits can have maximum delay of 8 cycles. - * - ADC resolution 6 bits can have maximum delay of 6 cycles. - * @rmtoll CCR DELAY LL_ADC_SetMultiTwoSamplingDelay - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @param MultiTwoSamplingDelay This parameter can be one of the following values: - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES - * @retval None - */ -__STATIC_INLINE void LL_ADC_SetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiTwoSamplingDelay) -{ - MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_DELAY, MultiTwoSamplingDelay); -} - -/** - * @brief Get ADC multimode delay between 2 sampling phases. - * @rmtoll CCR DELAY LL_ADC_GetMultiTwoSamplingDelay - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES - * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES - */ -__STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DELAY)); -} #endif /* ADC_MULTIMODE_SUPPORT */ /** @@ -3856,7 +3234,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADC /** * @brief Enable the selected ADC instance. - * @note On this STM32 series, after ADC enable, a delay for + * @note On this STM32 serie, after ADC enable, a delay for * ADC internal analog stabilization is required before performing a * ADC conversion start. * Refer to device datasheet, parameter tSTAB. @@ -3891,6 +3269,37 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) return (READ_BIT(ADCx->CR2, ADC_CR2_ADON) == (ADC_CR2_ADON)); } +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 serie, before starting a calibration, + * ADC must be disabled. + * A minimum number of ADC clock cycles are required + * between ADC disable state and calibration start. + * Refer to literal @ref LL_ADC_DELAY_DISABLE_CALIB_ADC_CYCLES. + * @note On this STM32 serie, hardware prerequisite before starting a calibration: + the ADC must have been in power-on state for at least + two ADC clock cycles. + * @rmtoll CR2 CAL LL_ADC_StartCalibration + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR2, ADC_CR2_CAL); +} + +/** + * @brief Get ADC calibration state. + * @rmtoll CR2 CAL LL_ADC_IsCalibrationOnGoing + * @param ADCx ADC instance + * @retval 0: calibration complete, 1: calibration in progress. + */ +__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR2, ADC_CR2_CAL) == (ADC_CR2_CAL)); +} + /** * @} */ @@ -3901,7 +3310,7 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) /** * @brief Start ADC group regular conversion. - * @note On this STM32 series, this function is relevant only for + * @note On this STM32 serie, this function is relevant only for * internal trigger (SW start), not for external trigger: * - If ADC trigger has been set to software start, ADC conversion * starts immediately. @@ -3917,22 +3326,20 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_REG_StartConversionSWStart(ADC_TypeDef *ADCx) { - SET_BIT(ADCx->CR2, ADC_CR2_SWSTART); + SET_BIT(ADCx->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTTRIG)); } /** * @brief Start ADC group regular conversion from external trigger. * @note ADC conversion will start at next trigger event (on the selected * trigger edge) following the ADC start conversion command. - * @note On this STM32 series, this function is relevant for + * @note On this STM32 serie, this function is relevant for * ADC conversion start from external trigger. * If internal trigger (SW start) is needed, perform ADC conversion * start using function @ref LL_ADC_REG_StartConversionSWStart(). * @rmtoll CR2 EXTEN LL_ADC_REG_StartConversionExtTrig * @param ExternalTriggerEdge This parameter can be one of the following values: * @arg @ref LL_ADC_REG_TRIG_EXT_RISING - * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING - * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING * @param ADCx ADC instance * @retval None */ @@ -3946,17 +3353,17 @@ __STATIC_INLINE void LL_ADC_REG_StartConversionExtTrig(ADC_TypeDef *ADCx, uint32 * @note No more ADC conversion will start at next trigger event * following the ADC stop conversion command. * If a conversion is on-going, it will be completed. - * @note On this STM32 series, there is no specific command + * @note On this STM32 serie, there is no specific command * to stop a conversion on-going or to stop ADC converting * in continuous mode. These actions can be performed * using function @ref LL_ADC_Disable(). - * @rmtoll CR2 EXTEN LL_ADC_REG_StopConversionExtTrig + * @rmtoll CR2 EXTSEL LL_ADC_REG_StopConversionExtTrig * @param ADCx ADC instance * @retval None */ __STATIC_INLINE void LL_ADC_REG_StopConversionExtTrig(ADC_TypeDef *ADCx) { - CLEAR_BIT(ADCx->CR2, ADC_CR2_EXTEN); + CLEAR_BIT(ADCx->CR2, ADC_CR2_EXTTRIG); } /** @@ -3988,51 +3395,6 @@ __STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx) return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); } -/** - * @brief Get ADC group regular conversion data, range fit for - * ADC resolution 10 bits. - * @note For devices with feature oversampling: Oversampling - * can increase data width, function for extended range - * may be needed: @ref LL_ADC_REG_ReadConversionData32. - * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData10 - * @param ADCx ADC instance - * @retval Value between Min_Data=0x000 and Max_Data=0x3FF - */ -__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx) -{ - return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); -} - -/** - * @brief Get ADC group regular conversion data, range fit for - * ADC resolution 8 bits. - * @note For devices with feature oversampling: Oversampling - * can increase data width, function for extended range - * may be needed: @ref LL_ADC_REG_ReadConversionData32. - * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData8 - * @param ADCx ADC instance - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx) -{ - return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); -} - -/** - * @brief Get ADC group regular conversion data, range fit for - * ADC resolution 6 bits. - * @note For devices with feature oversampling: Oversampling - * can increase data width, function for extended range - * may be needed: @ref LL_ADC_REG_ReadConversionData32. - * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData6 - * @param ADCx ADC instance - * @retval Value between Min_Data=0x00 and Max_Data=0x3F - */ -__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) -{ - return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); -} - #if defined(ADC_MULTIMODE_SUPPORT) /** * @brief Get ADC multimode conversion data of ADC master, ADC slave @@ -4045,9 +3407,9 @@ __STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) * transfer by DMA, because this function can do the same * by getting multimode conversion data of ADC master or ADC slave * separately). - * @rmtoll CDR DATA1 LL_ADC_REG_ReadMultiConversionData32\n - * CDR DATA2 LL_ADC_REG_ReadMultiConversionData32 - * @param ADCxy_COMMON ADC common instance + * @rmtoll DR DATA LL_ADC_REG_ReadMultiConversionData32\n + * DR ADC2DATA LL_ADC_REG_ReadMultiConversionData32 + * @param ADCx ADC instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @param ConversionData This parameter can be one of the following values: * @arg @ref LL_ADC_MULTI_MASTER @@ -4055,9 +3417,9 @@ __STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_MULTI_MASTER_SLAVE * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF */ -__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t ConversionData) +__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(ADC_TypeDef *ADCx, uint32_t ConversionData) { - return (uint32_t)(READ_BIT(ADCxy_COMMON->CDR, + return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_ADC2DATA) >> POSITION_VAL(ConversionData) ); @@ -4074,7 +3436,7 @@ __STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(ADC_Common_TypeDef /** * @brief Start ADC group injected conversion. - * @note On this STM32 series, this function is relevant only for + * @note On this STM32 serie, this function is relevant only for * internal trigger (SW start), not for external trigger: * - If ADC trigger has been set to software start, ADC conversion * starts immediately. @@ -4090,22 +3452,20 @@ __STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(ADC_Common_TypeDef */ __STATIC_INLINE void LL_ADC_INJ_StartConversionSWStart(ADC_TypeDef *ADCx) { - SET_BIT(ADCx->CR2, ADC_CR2_JSWSTART); + SET_BIT(ADCx->CR2, (ADC_CR2_JSWSTART | ADC_CR2_JEXTTRIG)); } /** * @brief Start ADC group injected conversion from external trigger. * @note ADC conversion will start at next trigger event (on the selected * trigger edge) following the ADC start conversion command. - * @note On this STM32 series, this function is relevant for + * @note On this STM32 serie, this function is relevant for * ADC conversion start from external trigger. * If internal trigger (SW start) is needed, perform ADC conversion * start using function @ref LL_ADC_INJ_StartConversionSWStart(). * @rmtoll CR2 JEXTEN LL_ADC_INJ_StartConversionExtTrig * @param ExternalTriggerEdge This parameter can be one of the following values: * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING - * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING - * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING * @param ADCx ADC instance * @retval None */ @@ -4119,17 +3479,17 @@ __STATIC_INLINE void LL_ADC_INJ_StartConversionExtTrig(ADC_TypeDef *ADCx, uint32 * @note No more ADC conversion will start at next trigger event * following the ADC stop conversion command. * If a conversion is on-going, it will be completed. - * @note On this STM32 series, there is no specific command + * @note On this STM32 serie, there is no specific command * to stop a conversion on-going or to stop ADC converting * in continuous mode. These actions can be performed * using function @ref LL_ADC_Disable(). - * @rmtoll CR2 JEXTEN LL_ADC_INJ_StopConversionExtTrig + * @rmtoll CR2 JEXTSEL LL_ADC_INJ_StopConversionExtTrig * @param ADCx ADC instance * @retval None */ __STATIC_INLINE void LL_ADC_INJ_StopConversionExtTrig(ADC_TypeDef *ADCx) { - CLEAR_BIT(ADCx->CR2, ADC_CR2_JEXTEN); + CLEAR_BIT(ADCx->CR2, ADC_CR2_JEXTTRIG); } /** @@ -4185,87 +3545,6 @@ __STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData12(ADC_TypeDef *ADCx, uint ); } -/** - * @brief Get ADC group injected conversion data, range fit for - * ADC resolution 10 bits. - * @note For devices with feature oversampling: Oversampling - * can increase data width, function for extended range - * may be needed: @ref LL_ADC_INJ_ReadConversionData32. - * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData10\n - * JDR2 JDATA LL_ADC_INJ_ReadConversionData10\n - * JDR3 JDATA LL_ADC_INJ_ReadConversionData10\n - * JDR4 JDATA LL_ADC_INJ_ReadConversionData10 - * @param ADCx ADC instance - * @param Rank This parameter can be one of the following values: - * @arg @ref LL_ADC_INJ_RANK_1 - * @arg @ref LL_ADC_INJ_RANK_2 - * @arg @ref LL_ADC_INJ_RANK_3 - * @arg @ref LL_ADC_INJ_RANK_4 - * @retval Value between Min_Data=0x000 and Max_Data=0x3FF - */ -__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData10(ADC_TypeDef *ADCx, uint32_t Rank) -{ - __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); - - return (uint16_t)(READ_BIT(*preg, - ADC_JDR1_JDATA) - ); -} - -/** - * @brief Get ADC group injected conversion data, range fit for - * ADC resolution 8 bits. - * @note For devices with feature oversampling: Oversampling - * can increase data width, function for extended range - * may be needed: @ref LL_ADC_INJ_ReadConversionData32. - * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData8\n - * JDR2 JDATA LL_ADC_INJ_ReadConversionData8\n - * JDR3 JDATA LL_ADC_INJ_ReadConversionData8\n - * JDR4 JDATA LL_ADC_INJ_ReadConversionData8 - * @param ADCx ADC instance - * @param Rank This parameter can be one of the following values: - * @arg @ref LL_ADC_INJ_RANK_1 - * @arg @ref LL_ADC_INJ_RANK_2 - * @arg @ref LL_ADC_INJ_RANK_3 - * @arg @ref LL_ADC_INJ_RANK_4 - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData8(ADC_TypeDef *ADCx, uint32_t Rank) -{ - __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); - - return (uint8_t)(READ_BIT(*preg, - ADC_JDR1_JDATA) - ); -} - -/** - * @brief Get ADC group injected conversion data, range fit for - * ADC resolution 6 bits. - * @note For devices with feature oversampling: Oversampling - * can increase data width, function for extended range - * may be needed: @ref LL_ADC_INJ_ReadConversionData32. - * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData6\n - * JDR2 JDATA LL_ADC_INJ_ReadConversionData6\n - * JDR3 JDATA LL_ADC_INJ_ReadConversionData6\n - * JDR4 JDATA LL_ADC_INJ_ReadConversionData6 - * @param ADCx ADC instance - * @param Rank This parameter can be one of the following values: - * @arg @ref LL_ADC_INJ_RANK_1 - * @arg @ref LL_ADC_INJ_RANK_2 - * @arg @ref LL_ADC_INJ_RANK_3 - * @arg @ref LL_ADC_INJ_RANK_4 - * @retval Value between Min_Data=0x00 and Max_Data=0x3F - */ -__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(ADC_TypeDef *ADCx, uint32_t Rank) -{ - __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); - - return (uint8_t)(READ_BIT(*preg, - ADC_JDR1_JDATA) - ); -} - /** * @} */ @@ -4275,29 +3554,18 @@ __STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(ADC_TypeDef *ADCx, uint32 */ /** - * @brief Get flag ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll SR EOC LL_ADC_IsActiveFlag_EOCS + * @brief Get flag ADC group regular end of sequence conversions. + * @rmtoll SR EOC LL_ADC_IsActiveFlag_EOS * @param ADCx ADC instance * @retval State of bit (1 or 0). */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCS(ADC_TypeDef *ADCx) +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(ADC_TypeDef *ADCx) { - return (READ_BIT(ADCx->SR, LL_ADC_FLAG_EOCS) == (LL_ADC_FLAG_EOCS)); -} - -/** - * @brief Get flag ADC group regular overrun. - * @rmtoll SR OVR LL_ADC_IsActiveFlag_OVR - * @param ADCx ADC instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx) -{ - return (READ_BIT(ADCx->SR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + return (READ_BIT(ADCx->SR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)); } @@ -4309,7 +3577,7 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx) */ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(ADC_TypeDef *ADCx) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ @@ -4328,29 +3596,18 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx) } /** - * @brief Clear flag ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll SR EOC LL_ADC_ClearFlag_EOCS + * @brief Clear flag ADC group regular end of sequence conversions. + * @rmtoll SR EOC LL_ADC_ClearFlag_EOS * @param ADCx ADC instance * @retval None */ -__STATIC_INLINE void LL_ADC_ClearFlag_EOCS(ADC_TypeDef *ADCx) +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) { - WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_EOCS); -} - -/** - * @brief Clear flag ADC group regular overrun. - * @rmtoll SR OVR LL_ADC_ClearFlag_OVR - * @param ADCx ADC instance - * @retval None - */ -__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) -{ - WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_OVR); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_EOS); } @@ -4362,7 +3619,7 @@ __STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_ClearFlag_JEOS(ADC_TypeDef *ADCx) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ @@ -4382,171 +3639,100 @@ __STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) #if defined(ADC_MULTIMODE_SUPPORT) /** - * @brief Get flag multimode ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration, of the ADC master. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll CSR EOC1 LL_ADC_IsActiveFlag_MST_EOCS + * @brief Get flag multimode ADC group regular end of sequence conversions of the ADC master. + * @rmtoll SR EOC LL_ADC_IsActiveFlag_MST_EOS * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval State of bit (1 or 0). */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOCS(ADC_Common_TypeDef *ADCxy_COMMON) +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOS(ADC_Common_TypeDef *ADCxy_COMMON) { - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOCS_MST) == (LL_ADC_FLAG_EOCS_MST)); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + return (READ_BIT(ADCxy_COMMON->SR, ADC_SR_EOC) == (ADC_SR_EOC)); } /** - * @brief Get flag multimode ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration, of the ADC slave 1. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll CSR EOC2 LL_ADC_IsActiveFlag_SLV1_EOCS + * @brief Get flag multimode ADC group regular end of sequence conversions of the ADC slave. + * @rmtoll SR EOC LL_ADC_IsActiveFlag_SLV_EOS * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval State of bit (1 or 0). */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_EOCS(ADC_Common_TypeDef *ADCxy_COMMON) +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOS(ADC_Common_TypeDef *ADCxy_COMMON) { - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOCS_SLV1) == (LL_ADC_FLAG_EOCS_SLV1)); -} - -/** - * @brief Get flag multimode ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration, of the ADC slave 2. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll CSR EOC3 LL_ADC_IsActiveFlag_SLV2_EOCS - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_EOCS(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOCS_SLV2) == (LL_ADC_FLAG_EOCS_SLV2)); -} -/** - * @brief Get flag multimode ADC group regular overrun of the ADC master. - * @rmtoll CSR OVR1 LL_ADC_IsActiveFlag_MST_OVR - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_OVR(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_MST) == (LL_ADC_FLAG_OVR_MST)); -} - -/** - * @brief Get flag multimode ADC group regular overrun of the ADC slave 1. - * @rmtoll CSR OVR2 LL_ADC_IsActiveFlag_SLV1_OVR - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_OVR(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_SLV1) == (LL_ADC_FLAG_OVR_SLV1)); -} - -/** - * @brief Get flag multimode ADC group regular overrun of the ADC slave 2. - * @rmtoll CSR OVR3 LL_ADC_IsActiveFlag_SLV2_OVR - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_OVR(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_SLV2) == (LL_ADC_FLAG_OVR_SLV2)); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCxy_COMMON->SR, 1U); + + return (READ_BIT(*preg, LL_ADC_FLAG_EOS_SLV) == (LL_ADC_FLAG_EOS_SLV)); } /** * @brief Get flag multimode ADC group injected end of sequence conversions of the ADC master. - * @rmtoll CSR JEOC LL_ADC_IsActiveFlag_MST_JEOS + * @rmtoll SR JEOC LL_ADC_IsActiveFlag_MST_JEOS * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOS(ADC_Common_TypeDef *ADCxy_COMMON) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ - return (READ_BIT(ADCxy_COMMON->CSR, ADC_CSR_JEOC1) == (ADC_CSR_JEOC1)); + return (READ_BIT(ADC1->SR, ADC_SR_JEOC) == (ADC_SR_JEOC)); } /** - * @brief Get flag multimode ADC group injected end of sequence conversions of the ADC slave 1. - * @rmtoll CSR JEOC2 LL_ADC_IsActiveFlag_SLV1_JEOS + * @brief Get flag multimode ADC group injected end of sequence conversions of the ADC slave. + * @rmtoll SR JEOC LL_ADC_IsActiveFlag_SLV_JEOS * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval State of bit (1 or 0). */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_JEOS(ADC_Common_TypeDef *ADCxy_COMMON) +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOS(ADC_Common_TypeDef *ADCxy_COMMON) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ - return (READ_BIT(ADCxy_COMMON->CSR, ADC_CSR_JEOC2) == (ADC_CSR_JEOC2)); -} - -/** - * @brief Get flag multimode ADC group injected end of sequence conversions of the ADC slave 2. - * @rmtoll CSR JEOC3 LL_ADC_IsActiveFlag_SLV2_JEOS - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_JEOS(ADC_Common_TypeDef *ADCxy_COMMON) -{ - /* Note: on this STM32 series, there is no flag ADC group injected */ - /* end of unitary conversion. */ - /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ - /* in other STM32 families). */ - return (READ_BIT(ADCxy_COMMON->CSR, ADC_CSR_JEOC3) == (ADC_CSR_JEOC3)); + + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCxy_COMMON->SR, 1U); + + return (READ_BIT(*preg, LL_ADC_FLAG_JEOS_SLV) == (LL_ADC_FLAG_JEOS_SLV)); } /** * @brief Get flag multimode ADC analog watchdog 1 of the ADC master. - * @rmtoll CSR AWD1 LL_ADC_IsActiveFlag_MST_AWD1 + * @rmtoll SR AWD LL_ADC_IsActiveFlag_MST_AWD1 * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD1(ADC_Common_TypeDef *ADCxy_COMMON) { - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_MST) == (LL_ADC_FLAG_AWD1_MST)); + return (READ_BIT(ADC1->SR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)); } /** - * @brief Get flag multimode analog watchdog 1 of the ADC slave 1. - * @rmtoll CSR AWD2 LL_ADC_IsActiveFlag_SLV1_AWD1 + * @brief Get flag multimode analog watchdog 1 of the ADC slave. + * @rmtoll SR AWD LL_ADC_IsActiveFlag_SLV_AWD1 * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval State of bit (1 or 0). */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_AWD1(ADC_Common_TypeDef *ADCxy_COMMON) +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD1(ADC_Common_TypeDef *ADCxy_COMMON) { - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_SLV1) == (LL_ADC_FLAG_AWD1_SLV1)); -} - -/** - * @brief Get flag multimode analog watchdog 1 of the ADC slave 2. - * @rmtoll CSR AWD3 LL_ADC_IsActiveFlag_SLV2_AWD1 - * @param ADCxy_COMMON ADC common instance - * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_AWD1(ADC_Common_TypeDef *ADCxy_COMMON) -{ - return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_SLV2) == (LL_ADC_FLAG_AWD1_SLV2)); + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCxy_COMMON->SR, 1U); + + return (READ_BIT(*preg, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)); } #endif /* ADC_MULTIMODE_SUPPORT */ @@ -4560,29 +3746,18 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_AWD1(ADC_Common_TypeDef *ADCxy */ /** - * @brief Enable interruption ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll CR1 EOCIE LL_ADC_EnableIT_EOCS + * @brief Enable interruption ADC group regular end of sequence conversions. + * @rmtoll CR1 EOCIE LL_ADC_EnableIT_EOS * @param ADCx ADC instance * @retval None */ -__STATIC_INLINE void LL_ADC_EnableIT_EOCS(ADC_TypeDef *ADCx) +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) { - SET_BIT(ADCx->CR1, LL_ADC_IT_EOCS); -} - -/** - * @brief Enable ADC group regular interruption overrun. - * @rmtoll CR1 OVRIE LL_ADC_EnableIT_OVR - * @param ADCx ADC instance - * @retval None - */ -__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) -{ - SET_BIT(ADCx->CR1, LL_ADC_IT_OVR); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + SET_BIT(ADCx->CR1, ADC_CR1_EOCIE); } @@ -4594,7 +3769,7 @@ __STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_EnableIT_JEOS(ADC_TypeDef *ADCx) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ @@ -4613,29 +3788,18 @@ __STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) } /** - * @brief Disable interruption ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * @rmtoll CR1 EOCIE LL_ADC_DisableIT_EOCS + * @brief Disable interruption ADC group regular end of sequence conversions. + * @rmtoll CR1 EOCIE LL_ADC_DisableIT_EOS * @param ADCx ADC instance * @retval None */ -__STATIC_INLINE void LL_ADC_DisableIT_EOCS(ADC_TypeDef *ADCx) +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) { - CLEAR_BIT(ADCx->CR1, LL_ADC_IT_EOCS); -} - -/** - * @brief Disable interruption ADC group regular overrun. - * @rmtoll CR1 OVRIE LL_ADC_DisableIT_OVR - * @param ADCx ADC instance - * @retval None - */ -__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) -{ - CLEAR_BIT(ADCx->CR1, LL_ADC_IT_OVR); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + CLEAR_BIT(ADCx->CR1, ADC_CR1_EOCIE); } @@ -4647,7 +3811,7 @@ __STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_DisableIT_JEOS(ADC_TypeDef *ADCx) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ @@ -4666,31 +3830,19 @@ __STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) } /** - * @brief Get state of interruption ADC group regular end of unitary conversion - * or end of sequence conversions, depending on - * ADC configuration. - * @note To configure flag of end of conversion, - * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). - * (0: interrupt disabled, 1: interrupt enabled) - * @rmtoll CR1 EOCIE LL_ADC_IsEnabledIT_EOCS - * @param ADCx ADC instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCS(ADC_TypeDef *ADCx) -{ - return (READ_BIT(ADCx->CR1, LL_ADC_IT_EOCS) == (LL_ADC_IT_EOCS)); -} - -/** - * @brief Get state of interruption ADC group regular overrun + * @brief Get state of interruption ADC group regular end of sequence conversions * (0: interrupt disabled, 1: interrupt enabled). - * @rmtoll CR1 OVRIE LL_ADC_IsEnabledIT_OVR + * @rmtoll CR1 EOCIE LL_ADC_IsEnabledIT_EOS * @param ADCx ADC instance * @retval State of bit (1 or 0). */ -__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx) +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(ADC_TypeDef *ADCx) { - return (READ_BIT(ADCx->CR1, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)); + /* Note: on this STM32 serie, there is no flag ADC group regular */ + /* end of unitary conversion. */ + /* Flag noted as "EOC" is corresponding to flag "EOS" */ + /* in other STM32 families). */ + return (READ_BIT(ADCx->CR1, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)); } @@ -4703,7 +3855,7 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx) */ __STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(ADC_TypeDef *ADCx) { - /* Note: on this STM32 series, there is no flag ADC group injected */ + /* Note: on this STM32 serie, there is no flag ADC group injected */ /* end of unitary conversion. */ /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ /* in other STM32 families). */ @@ -4775,5 +3927,6 @@ void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct); } #endif -#endif /* __STM32F4xx_LL_ADC_H */ +#endif /* __STM32F1xx_LL_ADC_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h new file mode 100644 index 0000000..8857920 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h @@ -0,0 +1,1015 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_BUS_H +#define __STM32F1xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +#if defined(RCC_AHBRSTR_OTGFSRST) || defined(RCC_AHBRSTR_ETHMACRST) +#define RCC_AHBRSTR_SUPPORT +#endif /* RCC_AHBRSTR_OTGFSRST || RCC_AHBRSTR_ETHMACRST */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN +#if defined(DMA2) +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN +#endif /*DMA2*/ +#if defined(ETH) +#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHBENR_ETHMACEN +#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHBENR_ETHMACRXEN +#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHBENR_ETHMACTXEN +#endif /*ETH*/ +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN +#if defined(FSMC_Bank1) +#define LL_AHB1_GRP1_PERIPH_FSMC RCC_AHBENR_FSMCEN +#endif /*FSMC_Bank1*/ +#if defined(USB_OTG_FS) +#define LL_AHB1_GRP1_PERIPH_OTGFS RCC_AHBENR_OTGFSEN +#endif /*USB_OTG_FS*/ +#if defined(SDIO) +#define LL_AHB1_GRP1_PERIPH_SDIO RCC_AHBENR_SDIOEN +#endif /*SDIO*/ +#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_APB1_GRP1_PERIPH_BKP RCC_APB1ENR_BKPEN +#if defined(CAN1) +#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN +#endif /*CAN1*/ +#if defined(CAN2) +#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN +#endif /*CAN2*/ +#if defined(CEC) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN +#endif /*CEC*/ +#if defined(DAC) +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN +#endif /*DAC*/ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN +#if defined(I2C2) +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN +#endif /*I2C2*/ +#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN +#if defined(SPI2) +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN +#endif /*SPI2*/ +#if defined(SPI3) +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN +#endif /*SPI3*/ +#if defined(TIM12) +#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN +#endif /*TIM12*/ +#if defined(TIM13) +#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN +#endif /*TIM13*/ +#if defined(TIM14) +#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN +#endif /*TIM14*/ +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN +#if defined(TIM4) +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN +#endif /*TIM4*/ +#if defined(TIM5) +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN +#endif /*TIM5*/ +#if defined(TIM6) +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN +#endif /*TIM6*/ +#if defined(TIM7) +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN +#endif /*TIM7*/ +#if defined(UART4) +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN +#endif /*UART4*/ +#if defined(UART5) +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN +#endif /*UART5*/ +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN +#if defined(USART3) +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN +#endif /*USART3*/ +#if defined(USB) +#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN +#endif /*USB*/ +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN +#if defined(ADC2) +#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN +#endif /*ADC2*/ +#if defined(ADC3) +#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN +#endif /*ADC3*/ +#define LL_APB2_GRP1_PERIPH_AFIO RCC_APB2ENR_AFIOEN +#define LL_APB2_GRP1_PERIPH_GPIOA RCC_APB2ENR_IOPAEN +#define LL_APB2_GRP1_PERIPH_GPIOB RCC_APB2ENR_IOPBEN +#define LL_APB2_GRP1_PERIPH_GPIOC RCC_APB2ENR_IOPCEN +#define LL_APB2_GRP1_PERIPH_GPIOD RCC_APB2ENR_IOPDEN +#if defined(GPIOE) +#define LL_APB2_GRP1_PERIPH_GPIOE RCC_APB2ENR_IOPEEN +#endif /*GPIOE*/ +#if defined(GPIOF) +#define LL_APB2_GRP1_PERIPH_GPIOF RCC_APB2ENR_IOPFEN +#endif /*GPIOF*/ +#if defined(GPIOG) +#define LL_APB2_GRP1_PERIPH_GPIOG RCC_APB2ENR_IOPGEN +#endif /*GPIOG*/ +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#if defined(TIM10) +#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN +#endif /*TIM10*/ +#if defined(TIM11) +#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN +#endif /*TIM11*/ +#if defined(TIM15) +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN +#endif /*TIM15*/ +#if defined(TIM16) +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#endif /*TIM16*/ +#if defined(TIM17) +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#endif /*TIM17*/ +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#if defined(TIM8) +#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN +#endif /*TIM8*/ +#if defined(TIM9) +#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN +#endif /*TIM9*/ +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHBENR ETHMACEN LL_AHB1_GRP1_EnableClock\n + * AHBENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n + * AHBENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n + * AHBENR FSMCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR OTGFSEN LL_AHB1_GRP1_EnableClock\n + * AHBENR SDIOEN LL_AHB1_GRP1_EnableClock\n + * AHBENR SRAMEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FSMCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR OTGFSEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR SDIOEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->AHBENR, Periphs) == Periphs); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHBENR ETHMACEN LL_AHB1_GRP1_DisableClock\n + * AHBENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n + * AHBENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n + * AHBENR FSMCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR OTGFSEN LL_AHB1_GRP1_DisableClock\n + * AHBENR SDIOEN LL_AHB1_GRP1_DisableClock\n + * AHBENR SRAMEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +#if defined(RCC_AHBRSTR_SUPPORT) +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHBRSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR OTGFSRST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHBRSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR OTGFSRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} +#endif /* RCC_AHBRSTR_SUPPORT */ + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR BKPEN LL_APB1_GRP1_EnableClock\n + * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n + * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_BKP + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR BKPEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_BKP + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR BKPEN LL_APB1_GRP1_DisableClock\n + * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n + * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_BKP + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR BKPRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_BKP + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR BKPRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_BKP + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n + * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n + * APB2ENR AFIOEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPAEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPBEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPCEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPDEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPEEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPFEN LL_APB2_GRP1_EnableClock\n + * APB2ENR IOPGEN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_AFIO + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR AFIOEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPAEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPBEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPCEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPDEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPEEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPFEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR IOPGEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_AFIO + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n + * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n + * APB2ENR AFIOEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPAEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPBEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPCEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPDEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPEEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPFEN LL_APB2_GRP1_DisableClock\n + * APB2ENR IOPGEN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_AFIO + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR ADC1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR ADC2RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR ADC3RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR AFIORST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPARST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPBRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPCRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPDRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPERST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPFRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR IOPGRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_AFIO + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR ADC1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR ADC2RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR ADC3RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR AFIORST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPARST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPBRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPCRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPDRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPERST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPFRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR IOPGRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_AFIO + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_BUS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h similarity index 95% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h index d478e13..a1444a8 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_cortex.h + * @file stm32f1xx_ll_cortex.h * @author MCD Application Team * @brief Header file of CORTEX LL module. @verbatim @@ -10,7 +10,7 @@ [..] The LL CORTEX driver contains a set of generic APIs that can be used by user: - (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick functions (+) Low power mode configuration (SCB register of Cortex-MCU) (+) MPU API to configure and enable regions @@ -22,27 +22,29 @@ ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_CORTEX_H -#define __STM32F4xx_LL_CORTEX_H +#ifndef __STM32F1xx_LL_CORTEX_H +#define __STM32F1xx_LL_CORTEX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -430,7 +432,7 @@ __STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) /** * @brief Get Variant number (The r value in the rnpn product revision identifier) * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant - * @retval Value between 0 and 255 (0x0: revision 0) + * @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2) */ __STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) { @@ -440,7 +442,7 @@ __STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) /** * @brief Get Constant number * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant - * @retval Value should be equal to 0xF for Cortex-M4 devices + * @retval Value should be equal to 0xF for Cortex-M3 devices */ __STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) { @@ -450,7 +452,7 @@ __STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) /** * @brief Get Part number * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo - * @retval Value should be equal to 0xC24 for Cortex-M4 + * @retval Value should be equal to 0xC23 for Cortex-M3 */ __STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) { @@ -460,7 +462,7 @@ __STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) /** * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision - * @retval Value between 0 and 255 (0x1: patch 1) + * @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1) */ __STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) { @@ -633,5 +635,6 @@ __STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) } #endif -#endif /* __STM32F4xx_LL_CORTEX_H */ +#endif /* __STM32F1xx_LL_CORTEX_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_crc.h similarity index 88% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_crc.h index 0a28006..c29119e 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_crc.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_crc.h + * @file stm32f1xx_ll_crc.h * @author MCD Application Team * @brief Header file of CRC LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_CRC_H -#define STM32F4xx_LL_CRC_H +#ifndef STM32F1xx_LL_CRC_H +#define STM32F1xx_LL_CRC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -198,4 +199,6 @@ ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); } #endif -#endif /* STM32F4xx_LL_CRC_H */ +#endif /* STM32F1xx_LL_CRC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dac.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dac.h similarity index 86% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dac.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dac.h index ea1500b..6aee1b3 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dac.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dac.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_dac.h + * @file stm32f1xx_ll_dac.h * @author MCD Application Team * @brief Header file of DAC LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_DAC_H -#define STM32F4xx_LL_DAC_H +#ifndef STM32F1xx_LL_DAC_H +#define STM32F1xx_LL_DAC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -53,35 +54,27 @@ extern "C" { /* - channel register offset of data output register DORx */ #define DAC_CR_CH1_BITOFFSET 0UL /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 1 */ -#if defined(DAC_CHANNEL2_SUPPORT) #define DAC_CR_CH2_BITOFFSET 16UL /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 2 */ #define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET) -#else -#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET) -#endif /* DAC_CHANNEL2_SUPPORT */ #define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. */ -#if defined(DAC_CHANNEL2_SUPPORT) #define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. */ #define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2) -#else -#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1) -#endif /* DAC_CHANNEL2_SUPPORT */ #define DAC_REG_DHR12R1_REGOFFSET 0x00000000UL /* Register DHR12Rx channel 1 taken as reference */ #define DAC_REG_DHR12L1_REGOFFSET 0x00100000UL /* Register offset of DHR12Lx channel 1 versus DHR12Rx channel 1 (shifted left of 20 bits) */ #define DAC_REG_DHR8R1_REGOFFSET 0x02000000UL /* Register offset of DHR8Rx channel 1 versus DHR12Rx channel 1 (shifted left of 24 bits) */ -#if defined(DAC_CHANNEL2_SUPPORT) + #define DAC_REG_DHR12R2_REGOFFSET 0x00030000UL /* Register offset of DHR12Rx channel 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */ #define DAC_REG_DHR12L2_REGOFFSET 0x00400000UL /* Register offset of DHR12Lx channel 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */ #define DAC_REG_DHR8R2_REGOFFSET 0x05000000UL /* Register offset of DHR8Rx channel 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */ -#endif /* DAC_CHANNEL2_SUPPORT */ + #define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000UL #define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000UL #define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000UL @@ -89,11 +82,11 @@ extern "C" { | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK) #define DAC_REG_DOR1_REGOFFSET 0x00000000UL /* Register DORx channel 1 taken as reference */ -#if defined(DAC_CHANNEL2_SUPPORT) + #define DAC_REG_DOR2_REGOFFSET 0x10000000UL /* Register offset of DORx channel 1 versus DORx channel 2 (shifted left of 28 bits) */ #define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET) -#endif /* DAC_CHANNEL2_SUPPORT */ + #define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FUL /* Mask of data hold registers offset (DHR12Rx, @@ -117,8 +110,6 @@ extern "C" { (shifted left of 28 bits) */ /* DAC registers bits positions */ -#if defined(DAC_CHANNEL2_SUPPORT) -#endif #define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS DAC_DHR12RD_DACC2DHR_Pos #define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS DAC_DHR12LD_DACC2DHR_Pos #define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS DAC_DHR8RD_DACC2DHR_Pos @@ -215,10 +206,10 @@ typedef struct */ /* DAC channel 1 flags */ #define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */ -#if defined(DAC_CHANNEL2_SUPPORT) + /* DAC channel 2 flags */ #define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */ -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} */ @@ -228,9 +219,9 @@ typedef struct * @{ */ #define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */ -#if defined(DAC_CHANNEL2_SUPPORT) + #define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */ -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} */ @@ -239,9 +230,9 @@ typedef struct * @{ */ #define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ -#if defined(DAC_CHANNEL2_SUPPORT) + #define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */ -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} */ @@ -250,6 +241,8 @@ typedef struct * @{ */ #define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */ +#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM3 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM15 TRGO. */ #define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external peripheral: TIM2 TRGO. */ #define LL_DAC_TRIG_EXT_TIM8_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM8 TRGO. */ #define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM4 TRGO. */ @@ -427,11 +420,8 @@ typedef struct * number is returned. * @param __CHANNEL__ This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval 1...2 (value "2" depending on DAC channel 2 availability) + * @arg @ref LL_DAC_CHANNEL_2 + * @retval 1...2 */ #define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ ((__CHANNEL__) & DAC_SWTR_CHX_MASK) @@ -444,43 +434,13 @@ typedef struct * will return a data equivalent to "LL_DAC_CHANNEL_1". * @note If the input parameter does not correspond to a DAC channel, * this macro returns value '0'. - * @param __DECIMAL_NB__ 1...2 (value "2" depending on DAC channel 2 availability) + * @param __DECIMAL_NB__ 1...2 * @retval Returned value can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ - (((__DECIMAL_NB__) == 1UL) \ - ? ( \ - LL_DAC_CHANNEL_1 \ - ) \ - : \ - (((__DECIMAL_NB__) == 2UL) \ - ? ( \ - LL_DAC_CHANNEL_2 \ - ) \ - : \ - ( \ - 0UL \ - ) \ - ) \ - ) -#else -#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ - (((__DECIMAL_NB__) == 1UL) \ - ? ( \ - LL_DAC_CHANNEL_1 \ - ) \ - : \ - ( \ - 0UL \ - ) \ - ) -#endif /* DAC_CHANNEL2_SUPPORT */ +#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__)\ + (((__DECIMAL_NB__) == 1UL)? (LL_DAC_CHANNEL_1 ):(((__DECIMAL_NB__) == 2UL) ? ( LL_DAC_CHANNEL_2):(0UL))) /** * @brief Helper macro to define the DAC conversion data full-scale digital @@ -547,18 +507,16 @@ typedef struct * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param TriggerSource This parameter can be one of the following values: * @arg @ref LL_DAC_TRIG_SOFTWARE - * @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 * @retval None */ @@ -580,18 +538,16 @@ __STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Cha * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval Returned value can be one of the following values: * @arg @ref LL_DAC_TRIG_SOFTWARE - * @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 */ __STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -609,10 +565,7 @@ __STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param WaveAutoGeneration This parameter can be one of the following values: * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE @@ -634,10 +587,7 @@ __STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DA * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval Returned value can be one of the following values: * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE @@ -663,10 +613,7 @@ __STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_ * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param NoiseLFSRMask This parameter can be one of the following values: * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 @@ -697,10 +644,7 @@ __STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Cha * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval Returned value can be one of the following values: * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 @@ -735,10 +679,7 @@ __STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param TriangleAmplitude This parameter can be one of the following values: * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 @@ -770,10 +711,7 @@ __STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval Returned value can be one of the following values: * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 @@ -802,10 +740,7 @@ __STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param OutputBuffer This parameter can be one of the following values: * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE @@ -825,10 +760,7 @@ __STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Chan * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval Returned value can be one of the following values: * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE @@ -857,10 +789,7 @@ __STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_ * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -878,10 +807,7 @@ __STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -898,10 +824,7 @@ __STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channe * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -936,10 +859,7 @@ __STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_ * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param Register This parameter can be one of the following values: * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED @@ -971,10 +891,7 @@ __STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_C * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -990,10 +907,7 @@ __STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1010,10 +924,7 @@ __STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1038,10 +949,7 @@ __STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channe * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1057,10 +965,7 @@ __STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channe * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1077,10 +982,7 @@ __STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Chann * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1108,10 +1010,7 @@ __STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC * @param DACx DAC instance * @param DAC_Channel This parameter can a combination of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval None */ __STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1129,10 +1028,7 @@ __STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Cha * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None */ @@ -1153,10 +1049,7 @@ __STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_ * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None */ @@ -1177,10 +1070,7 @@ __STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param Data Value between Min_Data=0x00 and Max_Data=0xFF * @retval None */ @@ -1192,7 +1082,7 @@ __STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t MODIFY_REG(*preg, DAC_DHR8R1_DACC1DHR, Data); } -#if defined(DAC_CHANNEL2_SUPPORT) + /** * @brief Set the data to be loaded in the data holding register * in format 12 bits left alignment (LSB aligned on bit 0), @@ -1252,7 +1142,7 @@ __STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR), ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); } -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @brief Retrieve output data currently generated for the selected DAC channel. @@ -1265,10 +1155,7 @@ __STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @retval Value between Min_Data=0x000 and Max_Data=0xFFF */ __STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel) @@ -1287,6 +1174,7 @@ __STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t D * @{ */ +#if defined(DAC_SR_DMAUDR1) /** * @brief Get DAC underrun flag for DAC channel 1 * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1 @@ -1297,8 +1185,9 @@ __STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx) { return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1)) ? 1UL : 0UL); } +#endif /* DAC_SR_DMAUDR1 */ -#if defined(DAC_CHANNEL2_SUPPORT) +#if defined(DAC_SR_DMAUDR2) /** * @brief Get DAC underrun flag for DAC channel 2 * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2 @@ -1309,8 +1198,9 @@ __STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx) { return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2)) ? 1UL : 0UL); } -#endif /* DAC_CHANNEL2_SUPPORT */ +#endif /* DAC_SR_DMAUDR2 */ +#if defined(DAC_SR_DMAUDR1) /** * @brief Clear DAC underrun flag for DAC channel 1 * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1 @@ -1321,8 +1211,9 @@ __STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx) { WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1); } +#endif /* DAC_SR_DMAUDR1 */ -#if defined(DAC_CHANNEL2_SUPPORT) +#if defined(DAC_SR_DMAUDR2) /** * @brief Clear DAC underrun flag for DAC channel 2 * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2 @@ -1333,7 +1224,7 @@ __STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) { WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2); } -#endif /* DAC_CHANNEL2_SUPPORT */ +#endif /* DAC_SR_DMAUDR2 */ /** * @} @@ -1343,6 +1234,7 @@ __STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) * @{ */ +#if defined(DAC_CR_DMAUDRIE1) /** * @brief Enable DMA underrun interrupt for DAC channel 1 * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1 @@ -1353,8 +1245,9 @@ __STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx) { SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); } +#endif /* DAC_CR_DMAUDRIE1 */ -#if defined(DAC_CHANNEL2_SUPPORT) +#if defined(DAC_CR_DMAUDRIE2) /** * @brief Enable DMA underrun interrupt for DAC channel 2 * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2 @@ -1365,8 +1258,9 @@ __STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx) { SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); } -#endif /* DAC_CHANNEL2_SUPPORT */ +#endif /* DAC_CR_DMAUDRIE2 */ +#if defined(DAC_CR_DMAUDRIE1) /** * @brief Disable DMA underrun interrupt for DAC channel 1 * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1 @@ -1377,8 +1271,9 @@ __STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx) { CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); } +#endif /* DAC_CR_DMAUDRIE1 */ -#if defined(DAC_CHANNEL2_SUPPORT) +#if defined(DAC_CR_DMAUDRIE2) /** * @brief Disable DMA underrun interrupt for DAC channel 2 * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2 @@ -1389,8 +1284,9 @@ __STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx) { CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); } -#endif /* DAC_CHANNEL2_SUPPORT */ +#endif /* DAC_CR_DMAUDRIE2 */ +#if defined(DAC_CR_DMAUDRIE1) /** * @brief Get DMA underrun interrupt for DAC channel 1 * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1 @@ -1401,8 +1297,9 @@ __STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx) { return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1)) ? 1UL : 0UL); } +#endif /* DAC_CR_DMAUDRIE1 */ -#if defined(DAC_CHANNEL2_SUPPORT) +#if defined(DAC_CR_DMAUDRIE2) /** * @brief Get DMA underrun interrupt for DAC channel 2 * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2 @@ -1413,7 +1310,7 @@ __STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx) { return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2)) ? 1UL : 0UL); } -#endif /* DAC_CHANNEL2_SUPPORT */ +#endif /* DAC_CR_DMAUDRIE2 */ /** * @} @@ -1451,5 +1348,6 @@ void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct); } #endif -#endif /* STM32F4xx_LL_DAC_H */ +#endif /* STM32F1xx_LL_DAC_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h new file mode 100644 index 0000000..e205066 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h @@ -0,0 +1,1960 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_DMA_H +#define __STM32F1xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE) +}; +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */ +#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */ +#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */ +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ + +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined (DMA2) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#endif + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined (DMA2) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR)); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)); +} + +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)); +} + +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)); +} + +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)); +} + +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)); +} + +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)); +} + +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)); +} + +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)); +} + +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)); +} + +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)); +} + +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)); +} + +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)); +} + +/** + * @brief Clear Channel 1 global interrupt flag. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +/** + * @brief Clear Channel 6 global interrupt flag. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +/** + * @brief Clear Channel 7 global interrupt flag. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h similarity index 86% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h index 65ab691..f0be0ad 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_exti.h + * @file stm32f1xx_ll_exti.h * @author MCD Application Team * @brief Header file of EXTI LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_EXTI_H -#define __STM32F4xx_LL_EXTI_H +#ifndef STM32F1xx_LL_EXTI_H +#define STM32F1xx_LL_EXTI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -106,7 +107,9 @@ typedef struct #if defined(EXTI_IMR_IM18) #define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ #endif +#if defined(EXTI_IMR_IM19) #define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ +#endif #if defined(EXTI_IMR_IM20) #define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ #endif @@ -146,10 +149,10 @@ typedef struct #define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ -#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */ +#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ #if defined(USE_FULL_LL_DRIVER) -#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */ +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ #endif /*USE_FULL_LL_DRIVER*/ /** @@ -160,9 +163,9 @@ typedef struct /** @defgroup EXTI_LL_EC_MODE Mode * @{ */ -#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ -#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ -#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02) /*!< Interrupt & Event Mode */ /** * @} */ @@ -170,10 +173,10 @@ typedef struct /** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger * @{ */ -#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ -#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ -#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ -#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03) /*!< Trigger Rising & Falling Mode */ /** * @} @@ -255,13 +258,8 @@ typedef struct * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_19 * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -296,13 +294,8 @@ __STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_19 * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -338,13 +331,8 @@ __STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_19 * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -385,13 +373,8 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_19 * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -425,13 +408,8 @@ __STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_19 * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -464,13 +442,8 @@ __STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_19 * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -518,11 +491,7 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -562,11 +531,7 @@ __STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -599,11 +564,7 @@ __STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -650,11 +611,7 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -692,11 +649,7 @@ __STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -728,11 +681,7 @@ __STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -777,11 +726,7 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -823,11 +768,7 @@ __STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -861,11 +802,7 @@ __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval @note This bit is set when the selected edge event arrives on the interrupt */ @@ -899,11 +836,7 @@ __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices + * @arg @ref LL_EXTI_LINE_19 * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -950,5 +883,6 @@ void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); } #endif -#endif /* __STM32F4xx_LL_EXTI_H */ +#endif /* STM32F1xx_LL_EXTI_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_fsmc.h similarity index 79% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_fsmc.h index 8b0ceb7..64968f4 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_fsmc.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_fsmc.h + * @file stm32f1xx_ll_fsmc.h * @author MCD Application Team * @brief Header file of FSMC HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_FSMC_H -#define STM32F4xx_LL_FSMC_H +#ifndef STM32F1xx_LL_FSMC_H +#define STM32F1xx_LL_FSMC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -38,7 +39,7 @@ extern "C" { /** @addtogroup FSMC_LL_Private_Macros * @{ */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) #define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \ ((__BANK__) == FSMC_NORSRAM_BANK2) || \ @@ -57,10 +58,6 @@ extern "C" { ((__SIZE__) == FSMC_PAGE_SIZE_256) || \ ((__SIZE__) == FSMC_PAGE_SIZE_512) || \ ((__SIZE__) == FSMC_PAGE_SIZE_1024)) -#if defined(FSMC_BCR1_WFDIS) -#define IS_FSMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FSMC_WRITE_FIFO_DISABLE) || \ - ((__FIFO__) == FSMC_WRITE_FIFO_ENABLE)) -#endif /* FSMC_BCR1_WFDIS */ #define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \ ((__MODE__) == FSMC_ACCESS_MODE_B) || \ ((__MODE__) == FSMC_ACCESS_MODE_C) || \ @@ -95,11 +92,10 @@ extern "C" { #define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE) #define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE) -#endif /* FSMC_Bank1 */ -#if defined(FSMC_Bank2_3) +#endif /* FSMC_BANK1 */ +#if defined(FSMC_BANK3) -#define IS_FSMC_NAND_BANK(__BANK__) (((__BANK__) == FSMC_NAND_BANK2) || \ - ((__BANK__) == FSMC_NAND_BANK3)) +#define IS_FSMC_NAND_BANK(__BANK__) ((__BANK__) == FSMC_NAND_BANK3) #define IS_FSMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \ ((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE)) #define IS_FSMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \ @@ -121,11 +117,11 @@ extern "C" { #define IS_FSMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U) #define IS_FSMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NAND_DEVICE) -#endif /* FSMC_Bank2_3 */ -#if defined(FSMC_Bank4) +#endif /* FSMC_BANK3 */ +#if defined(FSMC_BANK4) #define IS_FSMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_PCCARD_DEVICE) -#endif /* FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ /** * @} @@ -137,29 +133,29 @@ extern "C" { * @{ */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) #define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef #define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef -#endif /* FSMC_Bank1 */ -#if defined(FSMC_Bank2_3) +#endif /* FSMC_BANK1 */ +#if defined(FSMC_BANK3) #define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef -#endif /* FSMC_Bank2_3 */ -#if defined(FSMC_Bank4) +#endif /* FSMC_BANK3 */ +#if defined(FSMC_BANK4) #define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef -#endif /* FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) #define FSMC_NORSRAM_DEVICE FSMC_Bank1 #define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E -#endif /* FSMC_Bank1 */ -#if defined(FSMC_Bank2_3) +#endif /* FSMC_BANK1 */ +#if defined(FSMC_BANK3) #define FSMC_NAND_DEVICE FSMC_Bank2_3 -#endif /* FSMC_Bank2_3 */ -#if defined(FSMC_Bank4) +#endif /* FSMC_BANK3 */ +#if defined(FSMC_BANK4) #define FSMC_PCCARD_DEVICE FSMC_Bank4 -#endif /* FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /** * @brief FSMC NORSRAM Configuration Structure definition */ @@ -189,8 +185,7 @@ typedef struct uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash memory, valid only when accessing Flash memories in burst mode. - This parameter can be a value of @ref FSMC_Wrap_Mode - This mode is available only for the STM32F405/407/4015/417xx devices */ + This parameter can be a value of @ref FSMC_Wrap_Mode */ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one clock cycle before the wait state or during the wait state, @@ -214,17 +209,6 @@ typedef struct uint32_t WriteBurst; /*!< Enables or disables the write burst operation. This parameter can be a value of @ref FSMC_Write_Burst */ - uint32_t ContinuousClock; /*!< Enables or disables the FSMC clock output to external memory devices. - This parameter is only enabled through the FSMC_BCR1 register, - and don't care through FSMC_BCR2..4 registers. - This parameter can be a value of @ref FSMC_Continous_Clock - This mode is available only for the STM32F412Vx/Zx/Rx devices */ - - uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FSMC controller. - This parameter is only enabled through the FSMC_BCR1 register, - and don't care through FSMC_BCR2..4 registers. - This parameter can be a value of @ref FSMC_Write_FIFO - This mode is available only for the STM32F412Vx/Vx devices */ uint32_t PageSize; /*!< Specifies the memory page size. This parameter can be a value of @ref FSMC_Page_Size */ @@ -273,9 +257,9 @@ typedef struct uint32_t AccessMode; /*!< Specifies the asynchronous access mode. This parameter can be a value of @ref FSMC_Access_Mode */ } FSMC_NORSRAM_TimingTypeDef; -#endif /* FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) /** * @brief FSMC NAND Configuration Structure definition */ @@ -306,7 +290,7 @@ typedef struct } FSMC_NAND_InitTypeDef; #endif -#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +#if defined(FSMC_BANK3) || defined(FSMC_BANK4) /** * @brief FSMC NAND Timing parameters structure definition */ @@ -337,9 +321,9 @@ typedef struct on the memory space timing to be configured). This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ } FSMC_NAND_PCC_TimingTypeDef; -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ -#if defined(FSMC_Bank4) +#if defined(FSMC_BANK4) /** * @brief FSMC PCCARD Configuration Structure definition */ @@ -356,7 +340,7 @@ typedef struct delay between ALE low and RE low. This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ }FSMC_PCCARD_InitTypeDef; -#endif /* FSMC_Bank4 */ +#endif /** * @} @@ -366,7 +350,7 @@ typedef struct /** @addtogroup FSMC_LL_Exported_Constants FSMC Low Layer Exported Constants * @{ */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller * @{ @@ -440,7 +424,6 @@ typedef struct */ /** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode - * @note These values are available only for the STM32F405/415/407/417xx devices. * @{ */ #define FSMC_WRAP_MODE_DISABLE (0x00000000U) @@ -498,11 +481,10 @@ typedef struct * @{ */ #define FSMC_PAGE_SIZE_NONE (0x00000000U) -#define FSMC_PAGE_SIZE_128 FSMC_BCR1_CPSIZE_0 -#define FSMC_PAGE_SIZE_256 FSMC_BCR1_CPSIZE_1 -#define FSMC_PAGE_SIZE_512 (FSMC_BCR1_CPSIZE_0\ - | FSMC_BCR1_CPSIZE_1) -#define FSMC_PAGE_SIZE_1024 FSMC_BCR1_CPSIZE_2 +#define FSMC_PAGE_SIZE_128 (0x00010000U) +#define FSMC_PAGE_SIZE_256 (0x00020000U) +#define FSMC_PAGE_SIZE_512 (0x00030000U) +#define FSMC_PAGE_SIZE_1024 (0x00040000U) /** * @} */ @@ -517,7 +499,6 @@ typedef struct */ /** @defgroup FSMC_Continous_Clock FSMC Continuous Clock - * @note These values are available only for the STM32F412Vx/Zx/Rx devices. * @{ */ #define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U) @@ -526,18 +507,6 @@ typedef struct * @} */ -#if defined(FSMC_BCR1_WFDIS) -/** @defgroup FSMC_Write_FIFO FSMC Write FIFO - * @note These values are available only for the STM32F412Vx/Zx/Rx devices. - * @{ - */ -#define FSMC_WRITE_FIFO_DISABLE FSMC_BCR1_WFDIS -#define FSMC_WRITE_FIFO_ENABLE (0x00000000U) -#endif /* FSMC_BCR1_WFDIS */ -/** - * @} - */ - /** @defgroup FSMC_Access_Mode FSMC Access Mode * @{ */ @@ -552,9 +521,9 @@ typedef struct /** * @} */ -#endif /* FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ -#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +#if defined(FSMC_BANK3) || defined(FSMC_BANK4) /** @defgroup FSMC_LL_NAND_Controller FSMC NAND Controller * @{ @@ -562,9 +531,7 @@ typedef struct /** @defgroup FSMC_NAND_Bank FSMC NAND Bank * @{ */ -#if defined(FSMC_Bank2_3) #define FSMC_NAND_BANK2 (0x00000010U) -#endif #define FSMC_NAND_BANK3 (0x00000100U) /** * @} @@ -582,9 +549,9 @@ typedef struct /** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type * @{ */ -#if defined(FSMC_Bank4) +#if defined(FSMC_BANK4) #define FSMC_PCR_MEMORY_TYPE_PCCARD (0x00000000U) -#endif /* FSMC_Bank4 */ +#endif #define FSMC_PCR_MEMORY_TYPE_NAND (0x00000008U) /** * @} @@ -624,17 +591,17 @@ typedef struct /** * @} */ -#endif /* FSMC_Bank2_3 || FSMC_Bank4 */ +#endif /* FSMC_BANK3 */ /** @defgroup FSMC_LL_Interrupt_definition FSMC Low Layer Interrupt definition * @{ */ -#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +#if defined(FSMC_BANK3) || defined(FSMC_BANK4) #define FSMC_IT_RISING_EDGE (0x00000008U) #define FSMC_IT_LEVEL (0x00000010U) #define FSMC_IT_FALLING_EDGE (0x00000020U) -#endif /* FSMC_Bank2_3 || FSMC_Bank4 */ +#endif /* FSMC_BANK3 */ /** * @} */ @@ -642,102 +609,12 @@ typedef struct /** @defgroup FSMC_LL_Flag_definition FSMC Low Layer Flag definition * @{ */ -#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +#if defined(FSMC_BANK3) || defined(FSMC_BANK4) #define FSMC_FLAG_RISING_EDGE (0x00000001U) #define FSMC_FLAG_LEVEL (0x00000002U) #define FSMC_FLAG_FALLING_EDGE (0x00000004U) #define FSMC_FLAG_FEMPT (0x00000040U) -#endif /* FSMC_Bank2_3 || FSMC_Bank4 */ -/** - * @} - */ - -/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition - * @{ - */ -#define FMC_WRITE_OPERATION_DISABLE FSMC_WRITE_OPERATION_DISABLE -#define FMC_WRITE_OPERATION_ENABLE FSMC_WRITE_OPERATION_ENABLE - -#define FMC_NORSRAM_MEM_BUS_WIDTH_8 FSMC_NORSRAM_MEM_BUS_WIDTH_8 -#define FMC_NORSRAM_MEM_BUS_WIDTH_16 FSMC_NORSRAM_MEM_BUS_WIDTH_16 -#define FMC_NORSRAM_MEM_BUS_WIDTH_32 FSMC_NORSRAM_MEM_BUS_WIDTH_32 - -#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef -#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef -#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef -#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef - -#define FMC_NORSRAM_Init FSMC_NORSRAM_Init -#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init -#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init -#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit -#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable -#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable - -#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE -#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef -#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef -#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef - -#define FMC_NAND_Init FSMC_NAND_Init -#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init -#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init -#define FMC_NAND_DeInit FSMC_NAND_DeInit -#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable -#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable -#define FMC_NAND_GetECC FSMC_NAND_GetECC -#define FMC_PCCARD_Init FSMC_PCCARD_Init -#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init -#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init -#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init -#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit - -#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE -#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE -#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE -#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE -#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT -#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT -#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG -#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG -#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT -#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT -#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG -#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef -#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define FMC_NAND_TypeDef FSMC_NAND_TypeDef -#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE -#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define FMC_NAND_DEVICE FSMC_NAND_DEVICE -#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE - -#define FMC_NAND_BANK2 FSMC_NAND_BANK2 -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1 -#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2 -#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3 - -#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE -#define FMC_IT_LEVEL FSMC_IT_LEVEL -#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE -#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR - -#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE -#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL -#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE -#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT +#endif /* FSMC_BANK3 */ /** * @} */ @@ -754,7 +631,7 @@ typedef struct /** @defgroup FSMC_LL_Private_Macros FSMC_LL Private Macros * @{ */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Macros * @brief macros to handle NOR device enable/disable and read/write operations * @{ @@ -767,7 +644,7 @@ typedef struct * @retval None */ #define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ - |= FSMC_BCR1_MBKEN) + |= FSMC_BCRx_MBKEN) /** * @brief Disable the NORSRAM device access. @@ -776,14 +653,14 @@ typedef struct * @retval None */ #define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ - &= ~FSMC_BCR1_MBKEN) + &= ~FSMC_BCRx_MBKEN) /** * @} */ -#endif /* FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) /** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros * @brief macros to handle NAND device enable/disable * @{ @@ -795,8 +672,8 @@ typedef struct * @param __BANK__ FSMC_NAND Bank * @retval None */ -#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \ - ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN)) +#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCRx_PBKEN): \ + ((__INSTANCE__)->PCR3 |= FSMC_PCRx_PBKEN)) /** * @brief Disable the NAND device access. @@ -804,15 +681,15 @@ typedef struct * @param __BANK__ FSMC_NAND Bank * @retval None */ -#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->PCR2, FSMC_PCR2_PBKEN): \ - CLEAR_BIT((__INSTANCE__)->PCR3, FSMC_PCR3_PBKEN)) +#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->PCR2, FSMC_PCRx_PBKEN): \ + CLEAR_BIT((__INSTANCE__)->PCR3, FSMC_PCRx_PBKEN)) /** * @} */ -#endif /* FSMC_Bank2_3 */ +#endif -#if defined(FSMC_Bank4) +#if defined(FSMC_BANK4) /** @defgroup FSMC_LL_PCCARD_Macros FMC PCCARD Macros * @brief macros to handle PCCARD read/write operations * @{ @@ -822,20 +699,20 @@ typedef struct * @param __INSTANCE__ FSMC_PCCARD Instance * @retval None */ -#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN) +#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCRx_PBKEN) /** * @brief Disable the PCCARD device access. * @param __INSTANCE__ FSMC_PCCARD Instance * @retval None */ -#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN) +#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCRx_PBKEN) /** * @} */ #endif -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) /** @defgroup FSMC_LL_NAND_Interrupt FSMC NAND Interrupt * @brief macros to handle NAND interrupts * @{ @@ -902,9 +779,9 @@ typedef struct /** * @} */ -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ -#if defined(FSMC_Bank4) +#if defined(FSMC_BANK4) /** @defgroup FSMC_LL_PCCARD_Interrupt FSMC PCCARD Interrupt * @brief macros to handle PCCARD interrupts * @{ @@ -978,7 +855,7 @@ typedef struct * @{ */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /** @defgroup FSMC_LL_NORSRAM NOR SRAM * @{ */ @@ -1009,9 +886,9 @@ HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Dev /** * @} */ -#endif /* FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) /** @defgroup FSMC_LL_NAND NAND * @{ */ @@ -1041,9 +918,9 @@ HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, /** * @} */ -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ -#if defined(FSMC_Bank4) +#if defined(FSMC_BANK4) /** @defgroup FSMC_LL_PCCARD PCCARD * @{ */ @@ -1064,7 +941,7 @@ HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device); /** * @} */ -#endif /* FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ /** @@ -1083,4 +960,6 @@ HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device); } #endif -#endif /* STM32F4xx_LL_FSMC_H */ +#endif /* STM32F1xx_LL_FSMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h new file mode 100644 index 0000000..c6f41d5 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h @@ -0,0 +1,2347 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_LL_GPIO_H +#define STM32F1xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup GPIO_LL_Private_Constants GPIO Private Constants + * @{ + */ +/* Defines used for Pin Mask Initialization */ +#define GPIO_PIN_MASK_POS 8U +#define GPIO_PIN_NB 16U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 ((GPIO_BSRR_BS0 << GPIO_PIN_MASK_POS) | 0x00000001U) /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 ((GPIO_BSRR_BS1 << GPIO_PIN_MASK_POS) | 0x00000002U) /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 ((GPIO_BSRR_BS2 << GPIO_PIN_MASK_POS) | 0x00000004U) /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 ((GPIO_BSRR_BS3 << GPIO_PIN_MASK_POS) | 0x00000008U) /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 ((GPIO_BSRR_BS4 << GPIO_PIN_MASK_POS) | 0x00000010U) /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 ((GPIO_BSRR_BS5 << GPIO_PIN_MASK_POS) | 0x00000020U) /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 ((GPIO_BSRR_BS6 << GPIO_PIN_MASK_POS) | 0x00000040U) /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 ((GPIO_BSRR_BS7 << GPIO_PIN_MASK_POS) | 0x00000080U) /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 ((GPIO_BSRR_BS8 << GPIO_PIN_MASK_POS) | 0x04000001U) /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 ((GPIO_BSRR_BS9 << GPIO_PIN_MASK_POS) | 0x04000002U) /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 ((GPIO_BSRR_BS10 << GPIO_PIN_MASK_POS) | 0x04000004U) /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 ((GPIO_BSRR_BS11 << GPIO_PIN_MASK_POS) | 0x04000008U) /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 ((GPIO_BSRR_BS12 << GPIO_PIN_MASK_POS) | 0x04000010U) /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 ((GPIO_BSRR_BS13 << GPIO_PIN_MASK_POS) | 0x04000020U) /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 ((GPIO_BSRR_BS14 << GPIO_PIN_MASK_POS) | 0x04000040U) /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 ((GPIO_BSRR_BS15 << GPIO_PIN_MASK_POS) | 0x04000080U) /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (LL_GPIO_PIN_0 | LL_GPIO_PIN_1 | LL_GPIO_PIN_2 | \ + LL_GPIO_PIN_3 | LL_GPIO_PIN_4 | LL_GPIO_PIN_5 | \ + LL_GPIO_PIN_6 | LL_GPIO_PIN_7 | LL_GPIO_PIN_8 | \ + LL_GPIO_PIN_9 | LL_GPIO_PIN_10 | LL_GPIO_PIN_11 | \ + LL_GPIO_PIN_12 | LL_GPIO_PIN_13 | LL_GPIO_PIN_14 | \ + LL_GPIO_PIN_15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_ANALOG 0x00000000U /*!< Select analog mode */ +#define LL_GPIO_MODE_FLOATING GPIO_CRL_CNF0_0 /*!< Select floating mode */ +#define LL_GPIO_MODE_INPUT GPIO_CRL_CNF0_1 /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_CRL_MODE0_0 /*!< Select general purpose output mode */ +#define LL_GPIO_MODE_ALTERNATE (GPIO_CRL_CNF0_1 | GPIO_CRL_MODE0_0) /*!< Select alternate function mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL 0x00000000U /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_CRL_CNF0_0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_MODE_OUTPUT_10MHz GPIO_CRL_MODE0_0 /*!< Select Output mode, max speed 10 MHz */ +#define LL_GPIO_MODE_OUTPUT_2MHz GPIO_CRL_MODE0_1 /*!< Select Output mode, max speed 20 MHz */ +#define LL_GPIO_MODE_OUTPUT_50MHz GPIO_CRL_MODE0 /*!< Select Output mode, max speed 50 MHz */ +/** + * @} + */ + +#define LL_GPIO_SPEED_FREQ_LOW LL_GPIO_MODE_OUTPUT_2MHz /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM LL_GPIO_MODE_OUTPUT_10MHz /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH LL_GPIO_MODE_OUTPUT_50MHz /*!< Select I/O high output speed */ + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_DOWN 0x00000000U /*!< Select I/O pull down */ +#define LL_GPIO_PULL_UP GPIO_ODR_ODR0 /*!< Select I/O pull up */ + +/** + * @} + */ + +/** @defgroup GPIO_LL_EVENTOUT_PIN EVENTOUT Pin + * @{ + */ + +#define LL_GPIO_AF_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */ +#define LL_GPIO_AF_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */ +#define LL_GPIO_AF_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */ +#define LL_GPIO_AF_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */ +#define LL_GPIO_AF_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */ +#define LL_GPIO_AF_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */ +#define LL_GPIO_AF_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */ +#define LL_GPIO_AF_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */ +#define LL_GPIO_AF_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */ +#define LL_GPIO_AF_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */ +#define LL_GPIO_AF_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */ +#define LL_GPIO_AF_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */ +#define LL_GPIO_AF_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */ +#define LL_GPIO_AF_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */ +#define LL_GPIO_AF_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */ +#define LL_GPIO_AF_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */ + +/** + * @} + */ + +/** @defgroup GPIO_LL_EVENTOUT_PORT EVENTOUT Port + * @{ + */ + +#define LL_GPIO_AF_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */ +#define LL_GPIO_AF_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */ +#define LL_GPIO_AF_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */ +#define LL_GPIO_AF_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */ +#define LL_GPIO_AF_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */ + +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_EXTI_PORT GPIO EXTI PORT + * @{ + */ +#define LL_GPIO_AF_EXTI_PORTA 0U /*!< EXTI PORT A */ +#define LL_GPIO_AF_EXTI_PORTB 1U /*!< EXTI PORT B */ +#define LL_GPIO_AF_EXTI_PORTC 2U /*!< EXTI PORT C */ +#define LL_GPIO_AF_EXTI_PORTD 3U /*!< EXTI PORT D */ +#define LL_GPIO_AF_EXTI_PORTE 4U /*!< EXTI PORT E */ +#define LL_GPIO_AF_EXTI_PORTF 5U /*!< EXTI PORT F */ +#define LL_GPIO_AF_EXTI_PORTG 6U /*!< EXTI PORT G */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_EXTI_LINE GPIO EXTI LINE + * @{ + */ +#define LL_GPIO_AF_EXTI_LINE0 (0x000FU << 16U | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_GPIO_AF_EXTI_LINE1 (0x00F0U << 16U | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */ +#define LL_GPIO_AF_EXTI_LINE2 (0x0F00U << 16U | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_GPIO_AF_EXTI_LINE3 (0xF000U << 16U | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */ +#define LL_GPIO_AF_EXTI_LINE4 (0x000FU << 16U | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_GPIO_AF_EXTI_LINE5 (0x00F0U << 16U | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */ +#define LL_GPIO_AF_EXTI_LINE6 (0x0F00U << 16U | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_GPIO_AF_EXTI_LINE7 (0xF000U << 16U | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */ +#define LL_GPIO_AF_EXTI_LINE8 (0x000FU << 16U | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_GPIO_AF_EXTI_LINE9 (0x00F0U << 16U | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */ +#define LL_GPIO_AF_EXTI_LINE10 (0x0F00U << 16U | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_GPIO_AF_EXTI_LINE11 (0xF000U << 16U | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */ +#define LL_GPIO_AF_EXTI_LINE12 (0x000FU << 16U | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_GPIO_AF_EXTI_LINE13 (0x00F0U << 16U | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */ +#define LL_GPIO_AF_EXTI_LINE14 (0x0F00U << 16U | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_GPIO_AF_EXTI_LINE15 (0xF000U << 16U | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Analog, Floating input, Input with pull-up/pull-down, General purpose Output, + * Alternate function Output. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll CRL CNFy LL_GPIO_SetPinMode + * @rmtoll CRL MODEy LL_GPIO_SetPinMode + * @rmtoll CRH CNFy LL_GPIO_SetPinMode + * @rmtoll CRH MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_ANALOG + * @arg @ref LL_GPIO_MODE_FLOATING + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin >> 24))); + MODIFY_REG(*pReg, ((GPIO_CRL_CNF0 | GPIO_CRL_MODE0) << (POSITION_VAL(Pin) * 4U)), (Mode << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Analog, Floating input, Input with pull-up/pull-down, General purpose Output, + * Alternate function Output. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll CRL CNFy LL_GPIO_GetPinMode + * @rmtoll CRL MODEy LL_GPIO_GetPinMode + * @rmtoll CRH CNFy LL_GPIO_GetPinMode + * @rmtoll CRH MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_ANALOG + * @arg @ref LL_GPIO_MODE_FLOATING + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin >> 24))); + return (READ_BIT(*pReg, ((GPIO_CRL_CNF0 | GPIO_CRL_MODE0) << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium or Fast speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll CRL MODEy LL_GPIO_SetPinSpeed + * @rmtoll CRH MODEy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin >> 24))); + MODIFY_REG(*pReg, (GPIO_CRL_MODE0 << (POSITION_VAL(Pin) * 4U)), + (Speed << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll CRL MODEy LL_GPIO_GetPinSpeed + * @rmtoll CRH MODEy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin >> 24))); + return (READ_BIT(*pReg, (GPIO_CRL_MODE0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll CRL MODEy LL_GPIO_SetPinOutputType + * @rmtoll CRH MODEy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t OutputType) +{ + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin >> 24))); + MODIFY_REG(*pReg, (GPIO_CRL_CNF0_0 << (POSITION_VAL(Pin) * 4U)), + (OutputType << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll CRL MODEy LL_GPIO_GetPinOutputType + * @rmtoll CRH MODEy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin >> 24))); + return (READ_BIT(*pReg, (GPIO_CRL_CNF0_0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); + +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll ODR ODR LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_DOWN + * @arg @ref LL_GPIO_PULL_UP + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->ODR, (Pin >> GPIO_PIN_MASK_POS), Pull << (POSITION_VAL(Pin >> GPIO_PIN_MASK_POS))); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll ODR ODR LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_DOWN + * @arg @ref LL_GPIO_PULL_UP + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (READ_BIT(GPIOx->ODR, (GPIO_ODR_ODR0 << (POSITION_VAL(Pin >> GPIO_PIN_MASK_POS)))) >> (POSITION_VAL(Pin >> GPIO_PIN_MASK_POS))); +} + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)); + WRITE_REG(GPIOx->LCKR, ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)); + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->LCKR, ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)) == ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->IDR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU) == ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->ODR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU) == ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + uint32_t pinmask = ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU); + WRITE_REG(GPIOx->BSRR, ((odr & pinmask) << 16u) | (~odr & pinmask)); +} + +/** + * @} + */ + +/** @defgroup GPIO_AF_REMAPPING Alternate Function Remapping + * @brief This section propose definition to remap the alternate function to some other port/pins. + * @{ + */ + +/** + * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. + * @rmtoll MAPR SPI1_REMAP LL_GPIO_AF_EnableRemap_SPI1 + * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_SPI1(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. + * @rmtoll MAPR SPI1_REMAP LL_GPIO_AF_DisableRemap_SPI1 + * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_SPI1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_SPI1_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if SPI1 has been remaped or not + * @rmtoll MAPR SPI1_REMAP LL_GPIO_AF_IsEnabledRemap_SPI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_SPI1(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) == (AFIO_MAPR_SPI1_REMAP)); +} + +/** + * @brief Enable the remapping of I2C1 alternate function SCL and SDA. + * @rmtoll MAPR I2C1_REMAP LL_GPIO_AF_EnableRemap_I2C1 + * @note ENABLE: Remap (SCL/PB8, SDA/PB9) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_I2C1(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of I2C1 alternate function SCL and SDA. + * @rmtoll MAPR I2C1_REMAP LL_GPIO_AF_DisableRemap_I2C1 + * @note DISABLE: No remap (SCL/PB6, SDA/PB7) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_I2C1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_I2C1_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if I2C1 has been remaped or not + * @rmtoll MAPR I2C1_REMAP LL_GPIO_AF_IsEnabledRemap_I2C1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_I2C1(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) == (AFIO_MAPR_I2C1_REMAP)); +} + +/** + * @brief Enable the remapping of USART1 alternate function TX and RX. + * @rmtoll MAPR USART1_REMAP LL_GPIO_AF_EnableRemap_USART1 + * @note ENABLE: Remap (TX/PB6, RX/PB7) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_USART1(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of USART1 alternate function TX and RX. + * @rmtoll MAPR USART1_REMAP LL_GPIO_AF_DisableRemap_USART1 + * @note DISABLE: No remap (TX/PA9, RX/PA10) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_USART1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_USART1_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if USART1 has been remaped or not + * @rmtoll MAPR USART1_REMAP LL_GPIO_AF_IsEnabledRemap_USART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_USART1(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) == (AFIO_MAPR_USART1_REMAP)); +} + +/** + * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. + * @rmtoll MAPR USART2_REMAP LL_GPIO_AF_EnableRemap_USART2 + * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_USART2(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. + * @rmtoll MAPR USART2_REMAP LL_GPIO_AF_DisableRemap_USART2 + * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_USART2(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_USART2_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if USART2 has been remaped or not + * @rmtoll MAPR USART2_REMAP LL_GPIO_AF_IsEnabledRemap_USART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_USART2(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) == (AFIO_MAPR_USART2_REMAP)); +} + +#if defined (AFIO_MAPR_USART3_REMAP) +/** + * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @rmtoll MAPR USART3_REMAP LL_GPIO_AF_EnableRemap_USART3 + * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_USART3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_USART3_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_USART3_REMAP_FULLREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @rmtoll MAPR USART3_REMAP LL_GPIO_AF_RemapPartial_USART3 + * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial_USART3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_USART3_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_USART3_REMAP_PARTIALREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @rmtoll MAPR USART3_REMAP LL_GPIO_AF_DisableRemap_USART3 + * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_USART3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_USART3_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_USART3_REMAP_NOREMAP | AFIO_MAPR_SWJ_CFG)); +} +#endif + +/** + * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @rmtoll MAPR TIM1_REMAP LL_GPIO_AF_EnableRemap_TIM1 + * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM1_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM1_REMAP_FULLREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @rmtoll MAPR TIM1_REMAP LL_GPIO_AF_RemapPartial_TIM1 + * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial_TIM1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM1_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM1_REMAP_PARTIALREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @rmtoll MAPR TIM1_REMAP LL_GPIO_AF_DisableRemap_TIM1 + * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM1_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM1_REMAP_NOREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @rmtoll MAPR TIM2_REMAP LL_GPIO_AF_EnableRemap_TIM2 + * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM2(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM2_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM2_REMAP_FULLREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @rmtoll MAPR TIM2_REMAP LL_GPIO_AF_RemapPartial2_TIM2 + * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial2_TIM2(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM2_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @rmtoll MAPR TIM2_REMAP LL_GPIO_AF_RemapPartial1_TIM2 + * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial1_TIM2(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM2_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @rmtoll MAPR TIM2_REMAP LL_GPIO_AF_DisableRemap_TIM2 + * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM2(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM2_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM2_REMAP_NOREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 + * @rmtoll MAPR TIM3_REMAP LL_GPIO_AF_EnableRemap_TIM3 + * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM3_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM3_REMAP_FULLREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 + * @rmtoll MAPR TIM3_REMAP LL_GPIO_AF_RemapPartial_TIM3 + * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial_TIM3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM3_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM3_REMAP_PARTIALREMAP | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Disable the remapping of TIM3 alternate function channels 1 to 4 + * @rmtoll MAPR TIM3_REMAP LL_GPIO_AF_DisableRemap_TIM3 + * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM3_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_TIM3_REMAP_NOREMAP | AFIO_MAPR_SWJ_CFG)); +} + +#if defined(AFIO_MAPR_TIM4_REMAP) +/** + * @brief Enable the remapping of TIM4 alternate function channels 1 to 4. + * @rmtoll MAPR TIM4_REMAP LL_GPIO_AF_EnableRemap_TIM4 + * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15) + * @note TIM4_ETR on PE0 is not re-mapped. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM4(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP | AFIO_MAPR_SWJ_CFG); +} +/** + * @brief Disable the remapping of TIM4 alternate function channels 1 to 4. + * @rmtoll MAPR TIM4_REMAP LL_GPIO_AF_DisableRemap_TIM4 + * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9) + * @note TIM4_ETR on PE0 is not re-mapped. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM4(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM4_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if TIM4 has been remaped or not + * @rmtoll MAPR TIM4_REMAP LL_GPIO_AF_IsEnabledRemap_TIM4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM4(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) == (AFIO_MAPR_TIM4_REMAP)); +} +#endif + +#if defined(AFIO_MAPR_CAN_REMAP_REMAP1) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @rmtoll MAPR CAN_REMAP LL_GPIO_AF_RemapPartial1_CAN1 + * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial1_CAN1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_CAN_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_CAN_REMAP_REMAP1 | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @rmtoll MAPR CAN_REMAP LL_GPIO_AF_RemapPartial2_CAN1 + * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial2_CAN1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_CAN_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_CAN_REMAP_REMAP2 | AFIO_MAPR_SWJ_CFG)); +} + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @rmtoll MAPR CAN_REMAP LL_GPIO_AF_RemapPartial3_CAN1 + * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_RemapPartial3_CAN1(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_CAN_REMAP | AFIO_MAPR_SWJ_CFG), (AFIO_MAPR_CAN_REMAP_REMAP3 | AFIO_MAPR_SWJ_CFG)); +} +#endif + +/** + * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used + * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and + * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available + * on 100-pin and 144-pin packages, no need for remapping). + * @rmtoll MAPR PD01_REMAP LL_GPIO_AF_EnableRemap_PD01 + * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_PD01(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used + * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and + * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available + * on 100-pin and 144-pin packages, no need for remapping). + * @rmtoll MAPR PD01_REMAP LL_GPIO_AF_DisableRemap_PD01 + * @note DISABLE: No remapping of PD0 and PD1 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_PD01(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_PD01_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if PD01 has been remaped or not + * @rmtoll MAPR PD01_REMAP LL_GPIO_AF_IsEnabledRemap_PD01 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_PD01(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) == (AFIO_MAPR_PD01_REMAP)); +} + +#if defined(AFIO_MAPR_TIM5CH4_IREMAP) +/** + * @brief Enable the remapping of TIM5CH4. + * @rmtoll MAPR TIM5CH4_IREMAP LL_GPIO_AF_EnableRemap_TIM5CH4 + * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose. + * @note This function is available only in high density value line devices. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM5CH4(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of TIM5CH4. + * @rmtoll MAPR TIM5CH4_IREMAP LL_GPIO_AF_DisableRemap_TIM5CH4 + * @note DISABLE: TIM5_CH4 is connected to PA3 + * @note This function is available only in high density value line devices. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM5CH4(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM5CH4_IREMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if TIM5CH4 has been remaped or not + * @rmtoll MAPR TIM5CH4_IREMAP LL_GPIO_AF_IsEnabledRemap_TIM5CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM5CH4(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) == (AFIO_MAPR_TIM5CH4_IREMAP)); +} +#endif + +#if defined(AFIO_MAPR_ETH_REMAP) +/** + * @brief Enable the remapping of Ethernet MAC connections with the PHY. + * @rmtoll MAPR ETH_REMAP LL_GPIO_AF_EnableRemap_ETH + * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_ETH(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of Ethernet MAC connections with the PHY. + * @rmtoll MAPR ETH_REMAP LL_GPIO_AF_DisableRemap_ETH + * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_ETH(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_ETH_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if ETH has been remaped or not + * @rmtoll MAPR ETH_REMAP LL_GPIO_AF_IsEnabledRemap_ETH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_ETH(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) == (AFIO_MAPR_ETH_REMAP)); +} +#endif + +#if defined(AFIO_MAPR_CAN2_REMAP) + +/** + * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. + * @rmtoll MAPR CAN2_REMAP LL_GPIO_AF_EnableRemap_CAN2 + * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_CAN2(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP | AFIO_MAPR_SWJ_CFG); +} +/** + * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. + * @rmtoll MAPR CAN2_REMAP LL_GPIO_AF_DisableRemap_CAN2 + * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_CAN2(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_CAN2_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if CAN2 has been remaped or not + * @rmtoll MAPR CAN2_REMAP LL_GPIO_AF_IsEnabledRemap_CAN2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_CAN2(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) == (AFIO_MAPR_CAN2_REMAP)); +} +#endif + +#if defined(AFIO_MAPR_MII_RMII_SEL) +/** + * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. + * @rmtoll MAPR MII_RMII_SEL LL_GPIO_AF_Select_ETH_RMII + * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Select_ETH_RMII(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. + * @rmtoll MAPR MII_RMII_SEL LL_GPIO_AF_Select_ETH_MII + * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Select_ETH_MII(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_MII_RMII_SEL | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} +#endif + +#if defined(AFIO_MAPR_ADC1_ETRGINJ_REMAP) +/** + * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). + * @rmtoll MAPR ADC1_ETRGINJ_REMAP LL_GPIO_AF_EnableRemap_ADC1_ETRGINJ + * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_ADC1_ETRGINJ(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). + * @rmtoll MAPR ADC1_ETRGINJ_REMAP LL_GPIO_AF_DisableRemap_ADC1_ETRGINJ + * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_ADC1_ETRGINJ(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_ADC1_ETRGINJ_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if ADC1_ETRGINJ has been remaped or not + * @rmtoll MAPR ADC1_ETRGINJ_REMAP LL_GPIO_AF_IsEnabledRemap_ADC1_ETRGINJ + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_ADC1_ETRGINJ(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) == (AFIO_MAPR_ADC1_ETRGINJ_REMAP)); +} +#endif + +#if defined(AFIO_MAPR_ADC1_ETRGREG_REMAP) +/** + * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). + * @rmtoll MAPR ADC1_ETRGREG_REMAP LL_GPIO_AF_EnableRemap_ADC1_ETRGREG + * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_ADC1_ETRGREG(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). + * @rmtoll MAPR ADC1_ETRGREG_REMAP LL_GPIO_AF_DisableRemap_ADC1_ETRGREG + * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_ADC1_ETRGREG(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_ADC1_ETRGREG_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if ADC1_ETRGREG has been remaped or not + * @rmtoll MAPR ADC1_ETRGREG_REMAP LL_GPIO_AF_IsEnabledRemap_ADC1_ETRGREG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_ADC1_ETRGREG(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) == (AFIO_MAPR_ADC1_ETRGREG_REMAP)); +} +#endif + +#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). + * @rmtoll MAPR ADC2_ETRGINJ_REMAP LL_GPIO_AF_EnableRemap_ADC2_ETRGINJ + * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_ADC2_ETRGINJ(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). + * @rmtoll MAPR ADC2_ETRGINJ_REMAP LL_GPIO_AF_DisableRemap_ADC2_ETRGINJ + * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_ADC2_ETRGINJ(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_ADC2_ETRGINJ_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if ADC2_ETRGINJ has been remaped or not + * @rmtoll MAPR ADC2_ETRGINJ_REMAP LL_GPIO_AF_IsEnabledRemap_ADC2_ETRGINJ + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_ADC2_ETRGINJ(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) == (AFIO_MAPR_ADC2_ETRGINJ_REMAP)); +} +#endif + +#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @rmtoll MAPR ADC2_ETRGREG_REMAP LL_GPIO_AF_EnableRemap_ADC2_ETRGREG + * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_ADC2_ETRGREG(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @rmtoll MAPR ADC2_ETRGREG_REMAP LL_GPIO_AF_DisableRemap_ADC2_ETRGREG + * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_ADC2_ETRGREG(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_ADC2_ETRGREG_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if ADC2_ETRGREG has been remaped or not + * @rmtoll MAPR ADC2_ETRGREG_REMAP LL_GPIO_AF_IsEnabledRemap_ADC2_ETRGREG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_ADC2_ETRGREG(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) == (AFIO_MAPR_ADC2_ETRGREG_REMAP)); +} +#endif + +/** + * @brief Enable the Serial wire JTAG configuration + * @rmtoll MAPR SWJ_CFG LL_GPIO_AF_EnableRemap_SWJ + * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_SWJ(void) +{ + CLEAR_BIT(AFIO->MAPR,AFIO_MAPR_SWJ_CFG); + SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_RESET); +} + +/** + * @brief Enable the Serial wire JTAG configuration + * @rmtoll MAPR SWJ_CFG LL_GPIO_AF_Remap_SWJ_NONJTRST + * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Remap_SWJ_NONJTRST(void) +{ + CLEAR_BIT(AFIO->MAPR,AFIO_MAPR_SWJ_CFG); + SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_NOJNTRST); +} + +/** + * @brief Enable the Serial wire JTAG configuration + * @rmtoll MAPR SWJ_CFG LL_GPIO_AF_Remap_SWJ_NOJTAG + * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Remap_SWJ_NOJTAG(void) +{ + CLEAR_BIT(AFIO->MAPR,AFIO_MAPR_SWJ_CFG); + SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_JTAGDISABLE); +} + +/** + * @brief Disable the Serial wire JTAG configuration + * @rmtoll MAPR SWJ_CFG LL_GPIO_AF_DisableRemap_SWJ + * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_SWJ(void) +{ + CLEAR_BIT(AFIO->MAPR,AFIO_MAPR_SWJ_CFG); + SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_DISABLE); +} + +#if defined(AFIO_MAPR_SPI3_REMAP) + +/** + * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. + * @rmtoll MAPR SPI3_REMAP LL_GPIO_AF_EnableRemap_SPI3 + * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_SPI3(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. + * @rmtoll MAPR SPI3_REMAP LL_GPIO_AF_DisableRemap_SPI3 + * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5). + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_SPI3(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_SPI3_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Check if SPI3 has been remaped or not + * @rmtoll MAPR SPI3_REMAP LL_GPIO_AF_IsEnabledRemap_SPI3_REMAP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_SPI3(void) +{ + return (READ_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) == (AFIO_MAPR_SPI3_REMAP)); +} +#endif + +#if defined(AFIO_MAPR_TIM2ITR1_IREMAP) + +/** + * @brief Control of TIM2_ITR1 internal mapping. + * @rmtoll MAPR TIM2ITR1_IREMAP LL_GPIO_AF_Remap_TIM2ITR1_TO_USB + * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Remap_TIM2ITR1_TO_USB(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Control of TIM2_ITR1 internal mapping. + * @rmtoll MAPR TIM2ITR1_IREMAP LL_GPIO_AF_Remap_TIM2ITR1_TO_ETH + * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Remap_TIM2ITR1_TO_ETH(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_TIM2ITR1_IREMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} +#endif + +#if defined(AFIO_MAPR_PTP_PPS_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @rmtoll MAPR PTP_PPS_REMAP LL_GPIO_AF_EnableRemap_ETH_PTP_PPS + * @note ENABLE: PTP_PPS is output on PB5 pin. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_ETH_PTP_PPS(void) +{ + SET_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP | AFIO_MAPR_SWJ_CFG); +} + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @rmtoll MAPR PTP_PPS_REMAP LL_GPIO_AF_DisableRemap_ETH_PTP_PPS + * @note DISABLE: PTP_PPS not output on PB5 pin. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_ETH_PTP_PPS(void) +{ + MODIFY_REG(AFIO->MAPR, (AFIO_MAPR_PTP_PPS_REMAP | AFIO_MAPR_SWJ_CFG), AFIO_MAPR_SWJ_CFG); +} +#endif + +#if defined(AFIO_MAPR2_TIM9_REMAP) + +/** + * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2. + * @rmtoll MAPR2 TIM9_REMAP LL_GPIO_AF_EnableRemap_TIM9 + * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM9(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP); +} + +/** + * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2. + * @rmtoll MAPR2 TIM9_REMAP LL_GPIO_AF_DisableRemap_TIM9 + * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM9(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP); +} + +/** + * @brief Check if TIM9_CH1 and TIM9_CH2 have been remaped or not + * @rmtoll MAPR2 TIM9_REMAP LL_GPIO_AF_IsEnabledRemap_TIM9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM9(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) == (AFIO_MAPR2_TIM9_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM10_REMAP) + +/** + * @brief Enable the remapping of TIM10_CH1. + * @rmtoll MAPR2 TIM10_REMAP LL_GPIO_AF_EnableRemap_TIM10 + * @note ENABLE: Remap (TIM10_CH1 on PF6). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM10(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP); +} + +/** + * @brief Disable the remapping of TIM10_CH1. + * @rmtoll MAPR2 TIM10_REMAP LL_GPIO_AF_DisableRemap_TIM10 + * @note DISABLE: No remap (TIM10_CH1 on PB8). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM10(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP); +} + +/** + * @brief Check if TIM10_CH1 has been remaped or not + * @rmtoll MAPR2 TIM10_REMAP LL_GPIO_AF_IsEnabledRemap_TIM10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM10(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) == (AFIO_MAPR2_TIM10_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM11_REMAP) +/** + * @brief Enable the remapping of TIM11_CH1. + * @rmtoll MAPR2 TIM11_REMAP LL_GPIO_AF_EnableRemap_TIM11 + * @note ENABLE: Remap (TIM11_CH1 on PF7). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM11(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP); +} + +/** + * @brief Disable the remapping of TIM11_CH1. + * @rmtoll MAPR2 TIM11_REMAP LL_GPIO_AF_DisableRemap_TIM11 + * @note DISABLE: No remap (TIM11_CH1 on PB9). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM11(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP); +} + +/** + * @brief Check if TIM11_CH1 has been remaped or not + * @rmtoll MAPR2 TIM11_REMAP LL_GPIO_AF_IsEnabledRemap_TIM11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM11(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) == (AFIO_MAPR2_TIM11_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM13_REMAP) + +/** + * @brief Enable the remapping of TIM13_CH1. + * @rmtoll MAPR2 TIM13_REMAP LL_GPIO_AF_EnableRemap_TIM13 + * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM13(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP); +} + +/** + * @brief Disable the remapping of TIM13_CH1. + * @rmtoll MAPR2 TIM13_REMAP LL_GPIO_AF_DisableRemap_TIM13 + * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM13(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP); +} + +/** + * @brief Check if TIM13_CH1 has been remaped or not + * @rmtoll MAPR2 TIM13_REMAP LL_GPIO_AF_IsEnabledRemap_TIM13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM13(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) == (AFIO_MAPR2_TIM13_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM14_REMAP) + +/** + * @brief Enable the remapping of TIM14_CH1. + * @rmtoll MAPR2 TIM14_REMAP LL_GPIO_AF_EnableRemap_TIM14 + * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM14(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP); +} + +/** + * @brief Disable the remapping of TIM14_CH1. + * @rmtoll MAPR2 TIM14_REMAP LL_GPIO_AF_DisableRemap_TIM14 + * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM14(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP); +} + +/** + * @brief Check if TIM14_CH1 has been remaped or not + * @rmtoll MAPR2 TIM14_REMAP LL_GPIO_AF_IsEnabledRemap_TIM14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM14(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) == (AFIO_MAPR2_TIM14_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_FSMC_NADV_REMAP) + +/** + * @brief Controls the use of the optional FSMC_NADV signal. + * @rmtoll MAPR2 FSMC_NADV LL_GPIO_AF_Disconnect_FSMCNADV + * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Disconnect_FSMCNADV(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP); +} + +/** + * @brief Controls the use of the optional FSMC_NADV signal. + * @rmtoll MAPR2 FSMC_NADV LL_GPIO_AF_Connect_FSMCNADV + * @note CONNECTED: The NADV signal is connected to the output (default). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_Connect_FSMCNADV(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP); +} +#endif + +#if defined(AFIO_MAPR2_TIM15_REMAP) + +/** + * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2. + * @rmtoll MAPR2 TIM15_REMAP LL_GPIO_AF_EnableRemap_TIM15 + * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM15(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP); +} +/** + * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2. + * @rmtoll MAPR2 TIM15_REMAP LL_GPIO_AF_DisableRemap_TIM15 + * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM15(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP); +} + +/** + * @brief Check if TIM15_CH1 has been remaped or not + * @rmtoll MAPR2 TIM15_REMAP LL_GPIO_AF_IsEnabledRemap_TIM15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM15(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) == (AFIO_MAPR2_TIM15_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM16_REMAP) + +/** + * @brief Enable the remapping of TIM16_CH1. + * @rmtoll MAPR2 TIM16_REMAP LL_GPIO_AF_EnableRemap_TIM16 + * @note ENABLE: Remap (TIM16_CH1 on PA6). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM16(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP); +} + +/** + * @brief Disable the remapping of TIM16_CH1. + * @rmtoll MAPR2 TIM16_REMAP LL_GPIO_AF_DisableRemap_TIM16 + * @note DISABLE: No remap (TIM16_CH1 on PB8). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM16(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP); +} + +/** + * @brief Check if TIM16_CH1 has been remaped or not + * @rmtoll MAPR2 TIM16_REMAP LL_GPIO_AF_IsEnabledRemap_TIM16 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM16(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) == (AFIO_MAPR2_TIM16_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM17_REMAP) + +/** + * @brief Enable the remapping of TIM17_CH1. + * @rmtoll MAPR2 TIM17_REMAP LL_GPIO_AF_EnableRemap_TIM17 + * @note ENABLE: Remap (TIM17_CH1 on PA7). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM17(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP); +} + +/** + * @brief Disable the remapping of TIM17_CH1. + * @rmtoll MAPR2 TIM17_REMAP LL_GPIO_AF_DisableRemap_TIM17 + * @note DISABLE: No remap (TIM17_CH1 on PB9). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM17(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP); +} + +/** + * @brief Check if TIM17_CH1 has been remaped or not + * @rmtoll MAPR2 TIM17_REMAP LL_GPIO_AF_IsEnabledRemap_TIM17 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM17(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) == (AFIO_MAPR2_TIM17_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_CEC_REMAP) + +/** + * @brief Enable the remapping of CEC. + * @rmtoll MAPR2 CEC_REMAP LL_GPIO_AF_EnableRemap_CEC + * @note ENABLE: Remap (CEC on PB10). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_CEC(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP); +} + +/** + * @brief Disable the remapping of CEC. + * @rmtoll MAPR2 CEC_REMAP LL_GPIO_AF_DisableRemap_CEC + * @note DISABLE: No remap (CEC on PB8). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_CEC(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP); +} + +/** + * @brief Check if CEC has been remaped or not + * @rmtoll MAPR2 CEC_REMAP LL_GPIO_AF_IsEnabledRemap_CEC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_CEC(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) == (AFIO_MAPR2_CEC_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM1_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. + * @rmtoll MAPR2 TIM1_DMA_REMAP LL_GPIO_AF_EnableRemap_TIM1DMA + * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM1DMA(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP); +} + +/** + * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. + * @rmtoll MAPR2 TIM1_DMA_REMAP LL_GPIO_AF_DisableRemap_TIM1DMA + * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3). + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM1DMA(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP); +} + +/** + * @brief Check if TIM1DMA has been remaped or not + * @rmtoll MAPR2 TIM1_DMA_REMAP LL_GPIO_AF_IsEnabledRemap_TIM1DMA + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM1DMA(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) == (AFIO_MAPR2_TIM1_DMA_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. + * @rmtoll MAPR2 TIM76_DAC_DMA_REMAP LL_GPIO_AF_EnableRemap_TIM67DACDMA + * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM67DACDMA(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP); +} + +/** + * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. + * @rmtoll MAPR2 TIM76_DAC_DMA_REMAP LL_GPIO_AF_DisableRemap_TIM67DACDMA + * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4) + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM67DACDMA(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP); +} + +/** + * @brief Check if TIM67DACDMA has been remaped or not + * @rmtoll MAPR2 TIM76_DAC_DMA_REMAP LL_GPIO_AF_IsEnabledRemap_TIM67DACDMA + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM67DACDMA(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) == (AFIO_MAPR2_TIM67_DAC_DMA_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_TIM12_REMAP) + +/** + * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2. + * @rmtoll MAPR2 TIM12_REMAP LL_GPIO_AF_EnableRemap_TIM12 + * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13). + * @note This bit is available only in high density value line devices. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM12(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP); +} + +/** + * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2. + * @rmtoll MAPR2 TIM12_REMAP LL_GPIO_AF_DisableRemap_TIM12 + * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5). + * @note This bit is available only in high density value line devices. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM12(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP); +} + +/** + * @brief Check if TIM12_CH1 has been remaped or not + * @rmtoll MAPR2 TIM12_REMAP LL_GPIO_AF_IsEnabledRemap_TIM12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM12(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) == (AFIO_MAPR2_TIM12_REMAP)); +} +#endif + +#if defined(AFIO_MAPR2_MISC_REMAP) + +/** + * @brief Miscellaneous features remapping. + * This bit is set and cleared by software. It controls miscellaneous features. + * The DMA2 channel 5 interrupt position in the vector table. + * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). + * @rmtoll MAPR2 MISC_REMAP LL_GPIO_AF_EnableRemap_MISC + * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is + * selected as DAC Trigger 3, TIM15 triggers TIM1/3. + * @note This bit is available only in high density value line devices. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableRemap_MISC(void) +{ + SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP); +} + +/** + * @brief Miscellaneous features remapping. + * This bit is set and cleared by software. It controls miscellaneous features. + * The DMA2 channel 5 interrupt position in the vector table. + * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). + * @rmtoll MAPR2 MISC_REMAP LL_GPIO_AF_DisableRemap_MISC + * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO + * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3. + * @note This bit is available only in high density value line devices. + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableRemap_MISC(void) +{ + CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP); +} + +/** + * @brief Check if MISC has been remaped or not + * @rmtoll MAPR2 MISC_REMAP LL_GPIO_AF_IsEnabledRemap_MISC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_MISC(void) +{ + return (READ_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) == (AFIO_MAPR2_MISC_REMAP)); +} +#endif + +/** + * @} + */ + +/** @defgroup GPIO_AF_LL_EVENTOUT Output Event configuration + * @brief This section propose definition to Configure EVENTOUT Cortex feature . + * @{ + */ + +/** + * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected. + * @rmtoll EVCR PORT LL_GPIO_AF_ConfigEventout\n + * EVCR PIN LL_GPIO_AF_ConfigEventout + * @param LL_GPIO_PortSource This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_EVENTOUT_PORT_A + * @arg @ref LL_GPIO_AF_EVENTOUT_PORT_B + * @arg @ref LL_GPIO_AF_EVENTOUT_PORT_C + * @arg @ref LL_GPIO_AF_EVENTOUT_PORT_D + * @arg @ref LL_GPIO_AF_EVENTOUT_PORT_E + * @param LL_GPIO_PinSource This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_0 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_1 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_2 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_3 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_4 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_5 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_6 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_7 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_8 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_9 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_10 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_11 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_12 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_13 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_14 + * @arg @ref LL_GPIO_AF_EVENTOUT_PIN_15 + * @retval None +*/ +__STATIC_INLINE void LL_GPIO_AF_ConfigEventout(uint32_t LL_GPIO_PortSource, uint32_t LL_GPIO_PinSource) +{ + MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT) | (AFIO_EVCR_PIN), (LL_GPIO_PortSource) | (LL_GPIO_PinSource)); +} + +/** + * @brief Enables the Event Output. + * @rmtoll EVCR EVOE LL_GPIO_AF_EnableEventout + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_EnableEventout(void) +{ + SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); +} + +/** + * @brief Disables the Event Output. + * @rmtoll EVCR EVOE LL_GPIO_AF_DisableEventout + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_DisableEventout(void) +{ + CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); +} + +/** + * @} + */ +/** @defgroup GPIO_AF_LL_EXTI EXTI external interrupt + * @brief This section Configure source input for the EXTI external interrupt . + * @{ + */ + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll AFIO_EXTICR1 EXTIx LL_GPIO_AF_SetEXTISource\n + * AFIO_EXTICR2 EXTIx LL_GPIO_AF_SetEXTISource\n + * AFIO_EXTICR3 EXTIx LL_GPIO_AF_SetEXTISource\n + * AFIO_EXTICR4 EXTIx LL_GPIO_AF_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_EXTI_PORTA + * @arg @ref LL_GPIO_AF_EXTI_PORTB + * @arg @ref LL_GPIO_AF_EXTI_PORTC + * @arg @ref LL_GPIO_AF_EXTI_PORTD + * @arg @ref LL_GPIO_AF_EXTI_PORTE + * @arg @ref LL_GPIO_AF_EXTI_PORTF + * @arg @ref LL_GPIO_AF_EXTI_PORTG + * @param Line This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_EXTI_LINE0 + * @arg @ref LL_GPIO_AF_EXTI_LINE1 + * @arg @ref LL_GPIO_AF_EXTI_LINE2 + * @arg @ref LL_GPIO_AF_EXTI_LINE3 + * @arg @ref LL_GPIO_AF_EXTI_LINE4 + * @arg @ref LL_GPIO_AF_EXTI_LINE5 + * @arg @ref LL_GPIO_AF_EXTI_LINE6 + * @arg @ref LL_GPIO_AF_EXTI_LINE7 + * @arg @ref LL_GPIO_AF_EXTI_LINE8 + * @arg @ref LL_GPIO_AF_EXTI_LINE9 + * @arg @ref LL_GPIO_AF_EXTI_LINE10 + * @arg @ref LL_GPIO_AF_EXTI_LINE11 + * @arg @ref LL_GPIO_AF_EXTI_LINE12 + * @arg @ref LL_GPIO_AF_EXTI_LINE13 + * @arg @ref LL_GPIO_AF_EXTI_LINE14 + * @arg @ref LL_GPIO_AF_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_AF_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(AFIO->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16))); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll AFIO_EXTICR1 EXTIx LL_GPIO_AF_GetEXTISource\n + * AFIO_EXTICR2 EXTIx LL_GPIO_AF_GetEXTISource\n + * AFIO_EXTICR3 EXTIx LL_GPIO_AF_GetEXTISource\n + * AFIO_EXTICR4 EXTIx LL_GPIO_AF_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_EXTI_LINE0 + * @arg @ref LL_GPIO_AF_EXTI_LINE1 + * @arg @ref LL_GPIO_AF_EXTI_LINE2 + * @arg @ref LL_GPIO_AF_EXTI_LINE3 + * @arg @ref LL_GPIO_AF_EXTI_LINE4 + * @arg @ref LL_GPIO_AF_EXTI_LINE5 + * @arg @ref LL_GPIO_AF_EXTI_LINE6 + * @arg @ref LL_GPIO_AF_EXTI_LINE7 + * @arg @ref LL_GPIO_AF_EXTI_LINE8 + * @arg @ref LL_GPIO_AF_EXTI_LINE9 + * @arg @ref LL_GPIO_AF_EXTI_LINE10 + * @arg @ref LL_GPIO_AF_EXTI_LINE11 + * @arg @ref LL_GPIO_AF_EXTI_LINE12 + * @arg @ref LL_GPIO_AF_EXTI_LINE13 + * @arg @ref LL_GPIO_AF_EXTI_LINE14 + * @arg @ref LL_GPIO_AF_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_EXTI_PORTA + * @arg @ref LL_GPIO_AF_EXTI_PORTB + * @arg @ref LL_GPIO_AF_EXTI_PORTC + * @arg @ref LL_GPIO_AF_EXTI_PORTD + * @arg @ref LL_GPIO_AF_EXTI_PORTE + * @arg @ref LL_GPIO_AF_EXTI_PORTF + * @arg @ref LL_GPIO_AF_EXTI_PORTG + */ +__STATIC_INLINE uint32_t LL_GPIO_AF_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(AFIO->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_LL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h similarity index 92% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h index babba6b..e865505 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h @@ -1,37 +1,38 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_i2c.h + * @file stm32f1xx_ll_i2c.h * @author MCD Application Team * @brief Header file of I2C LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_I2C_H -#define __STM32F4xx_LL_I2C_H +#ifndef __STM32F1xx_LL_I2C_H +#define __STM32F1xx_LL_I2C_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (I2C1) || defined (I2C2) || defined (I2C3) +#if defined (I2C1) || defined (I2C2) /** @defgroup I2C_LL I2C * @{ @@ -85,18 +86,6 @@ typedef struct This feature can be modified afterwards using unitary function @ref LL_I2C_SetDutyCycle(). */ -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) - uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. - This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION - - This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ - - uint32_t DigitalFilter; /*!< Configures the digital noise filter. - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */ - -#endif uint32_t OwnAddress1; /*!< Specifies the device own address 1. This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF @@ -163,17 +152,6 @@ typedef struct * @} */ -#if defined(I2C_FLTR_ANOFF) -/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection - * @{ - */ -#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ -#define LL_I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF /*!< Analog filter is disabled.*/ -/** - * @} - */ - -#endif /** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length * @{ */ @@ -395,91 +373,6 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) return (READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)); } -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/** - * @brief Configure Noise Filters (Analog and Digital). - * @note If the analog filter is also enabled, the digital filter is added to analog filter. - * The filters can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR ANOFF LL_I2C_ConfigFilters\n - * FLTR DNF LL_I2C_ConfigFilters - * @param I2Cx I2C Instance. - * @param AnalogFilter This parameter can be one of the following values: - * @arg @ref LL_I2C_ANALOGFILTER_ENABLE - * @arg @ref LL_I2C_ANALOGFILTER_DISABLE - * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) - * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) -{ - MODIFY_REG(I2Cx->FLTR, I2C_FLTR_ANOFF | I2C_FLTR_DNF, AnalogFilter | DigitalFilter); -} -#endif -#if defined(I2C_FLTR_DNF) - -/** - * @brief Configure Digital Noise Filter. - * @note If the analog filter is also enabled, the digital filter is added to analog filter. - * This filter can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR DNF LL_I2C_SetDigitalFilter - * @param I2Cx I2C Instance. - * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) - * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) -{ - MODIFY_REG(I2Cx->FLTR, I2C_FLTR_DNF, DigitalFilter); -} - -/** - * @brief Get the current Digital Noise Filter configuration. - * @rmtoll FLTR DNF LL_I2C_GetDigitalFilter - * @param I2Cx I2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->FLTR, I2C_FLTR_DNF)); -} -#endif -#if defined(I2C_FLTR_ANOFF) - -/** - * @brief Enable Analog Noise Filter. - * @note This filter can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR ANOFF LL_I2C_EnableAnalogFilter - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); -} - -/** - * @brief Disable Analog Noise Filter. - * @note This filter can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR ANOFF LL_I2C_DisableAnalogFilter - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); -} - -/** - * @brief Check if Analog Noise Filter is enabled or disabled. - * @rmtoll FLTR ANOFF LL_I2C_IsEnabledAnalogFilter - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF) == (I2C_FLTR_ANOFF)); -} -#endif /** * @brief Enable DMA transmission requests. @@ -1876,7 +1769,7 @@ void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); * @} */ -#endif /* I2C1 || I2C2 || I2C3 */ +#endif /* I2C1 || I2C2 */ /** * @} @@ -1886,5 +1779,6 @@ void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); } #endif -#endif /* __STM32F4xx_LL_I2C_H */ +#endif /* __STM32F1xx_LL_I2C_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_iwdg.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_iwdg.h similarity index 93% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_iwdg.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_iwdg.h index 4158363..25a79e7 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_iwdg.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_iwdg.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_iwdg.h + * @file stm32f1xx_ll_iwdg.h * @author MCD Application Team * @brief Header file of IWDG LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_IWDG_H -#define STM32F4xx_LL_IWDG_H +#ifndef STM32F1xx_LL_IWDG_H +#define STM32F1xx_LL_IWDG_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -299,4 +300,6 @@ __STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx) } #endif -#endif /* STM32F4xx_LL_IWDG_H */ +#endif /* STM32F1xx_LL_IWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h new file mode 100644 index 0000000..caad8b3 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h @@ -0,0 +1,440 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_PWR_H +#define __STM32F1xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ +#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ +#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ +#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ +#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin 1 */ +/** + * @} + */ + + +/** @defgroup PWR_LL_EC_MODE_PWR Mode Power + * @{ + */ +#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ +#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */ +#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ +#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level + * @{ + */ +#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */ +#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */ +#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */ +#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */ +#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */ +/** + * @} + */ +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin 1 : PA0 */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable access to the backup domain + * @rmtoll CR DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); +} + +/** + * @brief Set voltage Regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_SetRegulModeDS + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); +} + +/** + * @brief Get voltage Regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_GetRegulModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); +} + +/** + * @brief Set Power Down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_SetPowerMode\n + * @rmtoll CR LPDS LL_PWR_SetPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP_MAINREGU + * @arg @ref LL_PWR_MODE_STOP_LPREGU + * @arg @ref LL_PWR_MODE_STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode); +} + +/** + * @brief Get Power Down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_GetPowerMode\n + * @rmtoll CR LPDS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP_MAINREGU + * @arg @ref LL_PWR_MODE_STOP_LPREGU + * @arg @ref LL_PWR_MODE_STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS))); +} + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); +} + + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Wake-up Flag + * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); +} + +/** + * @brief Get Standby Flag + * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); +} + +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); +} + +/** + * @brief Clear Standby Flag + * @rmtoll CR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + SET_BIT(PWR->CR, PWR_CR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll CR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + SET_BIT(PWR->CR, PWR_CR_CWUF); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h new file mode 100644 index 0000000..804c75f --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h @@ -0,0 +1,2312 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_RCC_H +#define __STM32F1xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ + uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 8000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 40000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#define LL_RCC_CIR_PLL3RDYC RCC_CIR_PLL3RDYC /*!< PLL3(PLLI2S) Ready Interrupt Clear */ +#define LL_RCC_CIR_PLL2RDYC RCC_CIR_PLL2RDYC /*!< PLL2 Ready Interrupt Clear */ +#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define LL_RCC_CIR_PLL3RDYF RCC_CIR_PLL3RDYF /*!< PLL3(PLLI2S) Ready Interrupt flag */ +#define LL_RCC_CIR_PLL2RDYF RCC_CIR_PLL2RDYF /*!< PLL2 Ready Interrupt flag */ +#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#define LL_RCC_CIR_PLL3RDYIE RCC_CIR_PLL3RDYIE /*!< PLL3(PLLI2S) Ready Interrupt Enable */ +#define LL_RCC_CIR_PLL2RDYIE RCC_CIR_PLL2RDYIE /*!< PLL2 Ready Interrupt Enable */ +/** + * @} + */ + +#if defined(RCC_CFGR2_PREDIV2) +/** @defgroup RCC_LL_EC_HSE_PREDIV2_DIV HSE PREDIV2 Division factor + * @{ + */ +#define LL_RCC_HSE_PREDIV2_DIV_1 RCC_CFGR2_PREDIV2_DIV1 /*!< PREDIV2 input clock not divided */ +#define LL_RCC_HSE_PREDIV2_DIV_2 RCC_CFGR2_PREDIV2_DIV2 /*!< PREDIV2 input clock divided by 2 */ +#define LL_RCC_HSE_PREDIV2_DIV_3 RCC_CFGR2_PREDIV2_DIV3 /*!< PREDIV2 input clock divided by 3 */ +#define LL_RCC_HSE_PREDIV2_DIV_4 RCC_CFGR2_PREDIV2_DIV4 /*!< PREDIV2 input clock divided by 4 */ +#define LL_RCC_HSE_PREDIV2_DIV_5 RCC_CFGR2_PREDIV2_DIV5 /*!< PREDIV2 input clock divided by 5 */ +#define LL_RCC_HSE_PREDIV2_DIV_6 RCC_CFGR2_PREDIV2_DIV6 /*!< PREDIV2 input clock divided by 6 */ +#define LL_RCC_HSE_PREDIV2_DIV_7 RCC_CFGR2_PREDIV2_DIV7 /*!< PREDIV2 input clock divided by 7 */ +#define LL_RCC_HSE_PREDIV2_DIV_8 RCC_CFGR2_PREDIV2_DIV8 /*!< PREDIV2 input clock divided by 8 */ +#define LL_RCC_HSE_PREDIV2_DIV_9 RCC_CFGR2_PREDIV2_DIV9 /*!< PREDIV2 input clock divided by 9 */ +#define LL_RCC_HSE_PREDIV2_DIV_10 RCC_CFGR2_PREDIV2_DIV10 /*!< PREDIV2 input clock divided by 10 */ +#define LL_RCC_HSE_PREDIV2_DIV_11 RCC_CFGR2_PREDIV2_DIV11 /*!< PREDIV2 input clock divided by 11 */ +#define LL_RCC_HSE_PREDIV2_DIV_12 RCC_CFGR2_PREDIV2_DIV12 /*!< PREDIV2 input clock divided by 12 */ +#define LL_RCC_HSE_PREDIV2_DIV_13 RCC_CFGR2_PREDIV2_DIV13 /*!< PREDIV2 input clock divided by 13 */ +#define LL_RCC_HSE_PREDIV2_DIV_14 RCC_CFGR2_PREDIV2_DIV14 /*!< PREDIV2 input clock divided by 14 */ +#define LL_RCC_HSE_PREDIV2_DIV_15 RCC_CFGR2_PREDIV2_DIV15 /*!< PREDIV2 input clock divided by 15 */ +#define LL_RCC_HSE_PREDIV2_DIV_16 RCC_CFGR2_PREDIV2_DIV16 /*!< PREDIV2 input clock divided by 16 */ +/** + * @} + */ + +#endif /* RCC_CFGR2_PREDIV2 */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) + * @{ + */ +#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK /*!< SYSCLK selection as MCO source */ +#define LL_RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI /*!< HSI selection as MCO source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE /*!< HSE selection as MCO source */ +#define LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 RCC_CFGR_MCO_PLLCLK_DIV2 /*!< PLL clock divided by 2*/ +#if defined(RCC_CFGR_MCO_PLL2CLK) +#define LL_RCC_MCO1SOURCE_PLL2CLK RCC_CFGR_MCO_PLL2CLK /*!< PLL2 clock selected as MCO source*/ +#endif /* RCC_CFGR_MCO_PLL2CLK */ +#if defined(RCC_CFGR_MCO_PLL3CLK_DIV2) +#define LL_RCC_MCO1SOURCE_PLLI2SCLK_DIV2 RCC_CFGR_MCO_PLL3CLK_DIV2 /*!< PLLI2S clock divided by 2 selected as MCO source*/ +#endif /* RCC_CFGR_MCO_PLL3CLK_DIV2 */ +#if defined(RCC_CFGR_MCO_EXT_HSE) +#define LL_RCC_MCO1SOURCE_EXT_HSE RCC_CFGR_MCO_EXT_HSE /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ +#endif /* RCC_CFGR_MCO_EXT_HSE */ +#if defined(RCC_CFGR_MCO_PLL3CLK) +#define LL_RCC_MCO1SOURCE_PLLI2SCLK RCC_CFGR_MCO_PLL3CLK /*!< PLLI2S clock selected as MCO source */ +#endif /* RCC_CFGR_MCO_PLL3CLK */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +#if defined(RCC_CFGR2_I2S2SRC) +/** @defgroup RCC_LL_EC_I2S2CLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#define LL_RCC_I2S2_CLKSOURCE_SYSCLK RCC_CFGR2_I2S2SRC /*!< System clock (SYSCLK) selected as I2S2 clock entry */ +#define LL_RCC_I2S2_CLKSOURCE_PLLI2S_VCO (uint32_t)(RCC_CFGR2_I2S2SRC | (RCC_CFGR2_I2S2SRC >> 16U)) /*!< PLLI2S VCO clock selected as I2S2 clock entry */ +#define LL_RCC_I2S3_CLKSOURCE_SYSCLK RCC_CFGR2_I2S3SRC /*!< System clock (SYSCLK) selected as I2S3 clock entry */ +#define LL_RCC_I2S3_CLKSOURCE_PLLI2S_VCO (uint32_t)(RCC_CFGR2_I2S3SRC | (RCC_CFGR2_I2S3SRC >> 16U)) /*!< PLLI2S VCO clock selected as I2S3 clock entry */ +/** + * @} + */ +#endif /* RCC_CFGR2_I2S2SRC */ + +#if defined(USB_OTG_FS) || defined(USB) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_CFGR_USBPRE) +#define LL_RCC_USB_CLKSOURCE_PLL RCC_CFGR_USBPRE /*!< PLL clock is not divided */ +#define LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5 0x00000000U /*!< PLL clock is divided by 1.5 */ +#endif /*RCC_CFGR_USBPRE*/ +#if defined(RCC_CFGR_OTGFSPRE) +#define LL_RCC_USB_CLKSOURCE_PLL_DIV_2 RCC_CFGR_OTGFSPRE /*!< PLL clock is divided by 2 */ +#define LL_RCC_USB_CLKSOURCE_PLL_DIV_3 0x00000000U /*!< PLL clock is divided by 3 */ +#endif /*RCC_CFGR_OTGFSPRE*/ +/** + * @} + */ +#endif /* USB_OTG_FS || USB */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE_PCLK2 Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_2 RCC_CFGR_ADCPRE_DIV2 /*ADC prescaler PCLK2 divided by 2*/ +#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_4 RCC_CFGR_ADCPRE_DIV4 /*ADC prescaler PCLK2 divided by 4*/ +#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_6 RCC_CFGR_ADCPRE_DIV6 /*ADC prescaler PCLK2 divided by 6*/ +#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_8 RCC_CFGR_ADCPRE_DIV8 /*ADC prescaler PCLK2 divided by 8*/ +/** + * @} + */ + +#if defined(RCC_CFGR2_I2S2SRC) +/** @defgroup RCC_LL_EC_I2S2 Peripheral I2S get clock source + * @{ + */ +#define LL_RCC_I2S2_CLKSOURCE RCC_CFGR2_I2S2SRC /*!< I2S2 Clock source selection */ +#define LL_RCC_I2S3_CLKSOURCE RCC_CFGR2_I2S3SRC /*!< I2S3 Clock source selection */ +/** + * @} + */ + +#endif /* RCC_CFGR2_I2S2SRC */ + +#if defined(USB_OTG_FS) || defined(USB) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#define LL_RCC_USB_CLKSOURCE 0x00400000U /*!< USB Clock source selection */ +/** + * @} + */ + +#endif /* USB_OTG_FS || USB */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE RCC_CFGR_ADCPRE /*!< ADC Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV128 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 128 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_MUL PLL Multiplicator factor + * @{ + */ +#if defined(RCC_CFGR_PLLMULL2) +#define LL_RCC_PLL_MUL_2 RCC_CFGR_PLLMULL2 /*!< PLL input clock*2 */ +#endif /*RCC_CFGR_PLLMULL2*/ +#if defined(RCC_CFGR_PLLMULL3) +#define LL_RCC_PLL_MUL_3 RCC_CFGR_PLLMULL3 /*!< PLL input clock*3 */ +#endif /*RCC_CFGR_PLLMULL3*/ +#define LL_RCC_PLL_MUL_4 RCC_CFGR_PLLMULL4 /*!< PLL input clock*4 */ +#define LL_RCC_PLL_MUL_5 RCC_CFGR_PLLMULL5 /*!< PLL input clock*5 */ +#define LL_RCC_PLL_MUL_6 RCC_CFGR_PLLMULL6 /*!< PLL input clock*6 */ +#define LL_RCC_PLL_MUL_7 RCC_CFGR_PLLMULL7 /*!< PLL input clock*7 */ +#define LL_RCC_PLL_MUL_8 RCC_CFGR_PLLMULL8 /*!< PLL input clock*8 */ +#define LL_RCC_PLL_MUL_9 RCC_CFGR_PLLMULL9 /*!< PLL input clock*9 */ +#if defined(RCC_CFGR_PLLMULL6_5) +#define LL_RCC_PLL_MUL_6_5 RCC_CFGR_PLLMULL6_5 /*!< PLL input clock*6 */ +#else +#define LL_RCC_PLL_MUL_10 RCC_CFGR_PLLMULL10 /*!< PLL input clock*10 */ +#define LL_RCC_PLL_MUL_11 RCC_CFGR_PLLMULL11 /*!< PLL input clock*11 */ +#define LL_RCC_PLL_MUL_12 RCC_CFGR_PLLMULL12 /*!< PLL input clock*12 */ +#define LL_RCC_PLL_MUL_13 RCC_CFGR_PLLMULL13 /*!< PLL input clock*13 */ +#define LL_RCC_PLL_MUL_14 RCC_CFGR_PLLMULL14 /*!< PLL input clock*14 */ +#define LL_RCC_PLL_MUL_15 RCC_CFGR_PLLMULL15 /*!< PLL input clock*15 */ +#define LL_RCC_PLL_MUL_16 RCC_CFGR_PLLMULL16 /*!< PLL input clock*16 */ +#endif /*RCC_CFGR_PLLMULL6_5*/ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL SOURCE + * @{ + */ +#define LL_RCC_PLLSOURCE_HSI_DIV_2 0x00000000U /*!< HSI clock divided by 2 selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC /*!< HSE/PREDIV1 clock selected as PLL entry clock source */ +#if defined(RCC_CFGR2_PREDIV1SRC) +#define LL_RCC_PLLSOURCE_PLL2 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/PREDIV1 clock selected as PLL entry clock source */ +#endif /*RCC_CFGR2_PREDIV1SRC*/ + +#if defined(RCC_CFGR2_PREDIV1) +#define LL_RCC_PLLSOURCE_HSE_DIV_1 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV1) /*!< HSE/1 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_2 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV2) /*!< HSE/2 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_3 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV3) /*!< HSE/3 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_4 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV4) /*!< HSE/4 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_5 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV5) /*!< HSE/5 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_6 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV6) /*!< HSE/6 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_7 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV7) /*!< HSE/7 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_8 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV8) /*!< HSE/8 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_9 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV9) /*!< HSE/9 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_10 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV10) /*!< HSE/10 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_11 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV11) /*!< HSE/11 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_12 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV12) /*!< HSE/12 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_13 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV13) /*!< HSE/13 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_14 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV14) /*!< HSE/14 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_15 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV15) /*!< HSE/15 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_16 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV16) /*!< HSE/16 clock selected as PLL entry clock source */ +#if defined(RCC_CFGR2_PREDIV1SRC) +#define LL_RCC_PLLSOURCE_PLL2_DIV_1 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV1 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/1 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_2 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV2 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/2 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_3 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV3 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/3 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_4 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV4 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/4 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_5 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV5 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/5 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_6 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV6 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/6 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_7 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV7 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/7 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_8 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV8 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/8 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_9 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV9 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/9 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_10 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV10 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/10 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_11 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV11 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/11 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_12 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV12 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/12 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_13 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV13 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/13 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_14 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV14 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/14 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_15 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV15 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/15 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_PLL2_DIV_16 (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV16 | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/16 clock selected as PLL entry clock source */ +#endif /*RCC_CFGR2_PREDIV1SRC*/ +#else +#define LL_RCC_PLLSOURCE_HSE_DIV_1 (RCC_CFGR_PLLSRC | 0x00000000U) /*!< HSE/1 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_2 (RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE) /*!< HSE/2 clock selected as PLL entry clock source */ +#endif /*RCC_CFGR2_PREDIV1*/ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PREDIV_DIV PREDIV Division factor + * @{ + */ +#if defined(RCC_CFGR2_PREDIV1) +#define LL_RCC_PREDIV_DIV_1 RCC_CFGR2_PREDIV1_DIV1 /*!< PREDIV1 input clock not divided */ +#define LL_RCC_PREDIV_DIV_2 RCC_CFGR2_PREDIV1_DIV2 /*!< PREDIV1 input clock divided by 2 */ +#define LL_RCC_PREDIV_DIV_3 RCC_CFGR2_PREDIV1_DIV3 /*!< PREDIV1 input clock divided by 3 */ +#define LL_RCC_PREDIV_DIV_4 RCC_CFGR2_PREDIV1_DIV4 /*!< PREDIV1 input clock divided by 4 */ +#define LL_RCC_PREDIV_DIV_5 RCC_CFGR2_PREDIV1_DIV5 /*!< PREDIV1 input clock divided by 5 */ +#define LL_RCC_PREDIV_DIV_6 RCC_CFGR2_PREDIV1_DIV6 /*!< PREDIV1 input clock divided by 6 */ +#define LL_RCC_PREDIV_DIV_7 RCC_CFGR2_PREDIV1_DIV7 /*!< PREDIV1 input clock divided by 7 */ +#define LL_RCC_PREDIV_DIV_8 RCC_CFGR2_PREDIV1_DIV8 /*!< PREDIV1 input clock divided by 8 */ +#define LL_RCC_PREDIV_DIV_9 RCC_CFGR2_PREDIV1_DIV9 /*!< PREDIV1 input clock divided by 9 */ +#define LL_RCC_PREDIV_DIV_10 RCC_CFGR2_PREDIV1_DIV10 /*!< PREDIV1 input clock divided by 10 */ +#define LL_RCC_PREDIV_DIV_11 RCC_CFGR2_PREDIV1_DIV11 /*!< PREDIV1 input clock divided by 11 */ +#define LL_RCC_PREDIV_DIV_12 RCC_CFGR2_PREDIV1_DIV12 /*!< PREDIV1 input clock divided by 12 */ +#define LL_RCC_PREDIV_DIV_13 RCC_CFGR2_PREDIV1_DIV13 /*!< PREDIV1 input clock divided by 13 */ +#define LL_RCC_PREDIV_DIV_14 RCC_CFGR2_PREDIV1_DIV14 /*!< PREDIV1 input clock divided by 14 */ +#define LL_RCC_PREDIV_DIV_15 RCC_CFGR2_PREDIV1_DIV15 /*!< PREDIV1 input clock divided by 15 */ +#define LL_RCC_PREDIV_DIV_16 RCC_CFGR2_PREDIV1_DIV16 /*!< PREDIV1 input clock divided by 16 */ +#else +#define LL_RCC_PREDIV_DIV_1 0x00000000U /*!< HSE divider clock clock not divided */ +#define LL_RCC_PREDIV_DIV_2 RCC_CFGR_PLLXTPRE /*!< HSE divider clock divided by 2 for PLL entry */ +#endif /*RCC_CFGR2_PREDIV1*/ +/** + * @} + */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** @defgroup RCC_LL_EC_PLLI2S_MUL PLLI2S MUL + * @{ + */ +#define LL_RCC_PLLI2S_MUL_8 RCC_CFGR2_PLL3MUL8 /*!< PLLI2S input clock * 8 */ +#define LL_RCC_PLLI2S_MUL_9 RCC_CFGR2_PLL3MUL9 /*!< PLLI2S input clock * 9 */ +#define LL_RCC_PLLI2S_MUL_10 RCC_CFGR2_PLL3MUL10 /*!< PLLI2S input clock * 10 */ +#define LL_RCC_PLLI2S_MUL_11 RCC_CFGR2_PLL3MUL11 /*!< PLLI2S input clock * 11 */ +#define LL_RCC_PLLI2S_MUL_12 RCC_CFGR2_PLL3MUL12 /*!< PLLI2S input clock * 12 */ +#define LL_RCC_PLLI2S_MUL_13 RCC_CFGR2_PLL3MUL13 /*!< PLLI2S input clock * 13 */ +#define LL_RCC_PLLI2S_MUL_14 RCC_CFGR2_PLL3MUL14 /*!< PLLI2S input clock * 14 */ +#define LL_RCC_PLLI2S_MUL_16 RCC_CFGR2_PLL3MUL16 /*!< PLLI2S input clock * 16 */ +#define LL_RCC_PLLI2S_MUL_20 RCC_CFGR2_PLL3MUL20 /*!< PLLI2S input clock * 20 */ +/** + * @} + */ + +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** @defgroup RCC_LL_EC_PLL2_MUL PLL2 MUL + * @{ + */ +#define LL_RCC_PLL2_MUL_8 RCC_CFGR2_PLL2MUL8 /*!< PLL2 input clock * 8 */ +#define LL_RCC_PLL2_MUL_9 RCC_CFGR2_PLL2MUL9 /*!< PLL2 input clock * 9 */ +#define LL_RCC_PLL2_MUL_10 RCC_CFGR2_PLL2MUL10 /*!< PLL2 input clock * 10 */ +#define LL_RCC_PLL2_MUL_11 RCC_CFGR2_PLL2MUL11 /*!< PLL2 input clock * 11 */ +#define LL_RCC_PLL2_MUL_12 RCC_CFGR2_PLL2MUL12 /*!< PLL2 input clock * 12 */ +#define LL_RCC_PLL2_MUL_13 RCC_CFGR2_PLL2MUL13 /*!< PLL2 input clock * 13 */ +#define LL_RCC_PLL2_MUL_14 RCC_CFGR2_PLL2MUL14 /*!< PLL2 input clock * 14 */ +#define LL_RCC_PLL2_MUL_16 RCC_CFGR2_PLL2MUL16 /*!< PLL2 input clock * 16 */ +#define LL_RCC_PLL2_MUL_20 RCC_CFGR2_PLL2MUL20 /*!< PLL2 input clock * 20 */ +/** + * @} + */ + +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +#if defined(RCC_CFGR_PLLMULL6_5) +/** + * @brief Helper macro to calculate the PLLCLK frequency + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE / (@ref LL_RCC_PLL_GetPrediv () + 1), @ref LL_RCC_PLL_GetMultiplicator()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE div Prediv1 / HSI div 2 / PLL2 div Prediv1) + * @param __PLLMUL__: This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_6_5 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__) \ + (((__PLLMUL__) != RCC_CFGR_PLLMULL6_5) ? \ + ((__INPUTFREQ__) * ((((__PLLMUL__) & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos) + 2U)) :\ + (((__INPUTFREQ__) * 13U) / 2U)) + +#else +/** + * @brief Helper macro to calculate the PLLCLK frequency + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE / (@ref LL_RCC_PLL_GetPrediv () + 1), @ref LL_RCC_PLL_GetMultiplicator ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE div Prediv1 or div 2 / HSI div 2) + * @param __PLLMUL__: This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_10 + * @arg @ref LL_RCC_PLL_MUL_11 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_13 + * @arg @ref LL_RCC_PLL_MUL_14 + * @arg @ref LL_RCC_PLL_MUL_15 + * @arg @ref LL_RCC_PLL_MUL_16 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__) ((__INPUTFREQ__) * (((__PLLMUL__) >> RCC_CFGR_PLLMULL_Pos) + 2U)) +#endif /* RCC_CFGR_PLLMULL6_5 */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Helper macro to calculate the PLLI2S frequency + * @note ex: @ref __LL_RCC_CALC_PLLI2SCLK_FREQ (HSE_VALUE, @ref LL_RCC_PLLI2S_GetMultiplicator (), @ref LL_RCC_HSE_GetPrediv2 ()); + * @param __INPUTFREQ__ PLLI2S Input frequency (based on HSE value) + * @param __PLLI2SMUL__: This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2S_MUL_8 + * @arg @ref LL_RCC_PLLI2S_MUL_9 + * @arg @ref LL_RCC_PLLI2S_MUL_10 + * @arg @ref LL_RCC_PLLI2S_MUL_11 + * @arg @ref LL_RCC_PLLI2S_MUL_12 + * @arg @ref LL_RCC_PLLI2S_MUL_13 + * @arg @ref LL_RCC_PLLI2S_MUL_14 + * @arg @ref LL_RCC_PLLI2S_MUL_16 + * @arg @ref LL_RCC_PLLI2S_MUL_20 + * @param __PLLI2SDIV__: This parameter can be one of the following values: + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_1 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_2 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_3 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_4 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_5 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_6 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_7 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_8 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_9 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_10 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_11 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_12 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_13 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_14 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_15 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_16 + * @retval PLLI2S clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLI2SCLK_FREQ(__INPUTFREQ__, __PLLI2SMUL__, __PLLI2SDIV__) (((__INPUTFREQ__) * (((__PLLI2SMUL__) >> RCC_CFGR2_PLL3MUL_Pos) + 2U)) / (((__PLLI2SDIV__) >> RCC_CFGR2_PREDIV2_Pos) + 1U)) +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Helper macro to calculate the PLL2 frequency + * @note ex: @ref __LL_RCC_CALC_PLL2CLK_FREQ (HSE_VALUE, @ref LL_RCC_PLL2_GetMultiplicator (), @ref LL_RCC_HSE_GetPrediv2 ()); + * @param __INPUTFREQ__ PLL2 Input frequency (based on HSE value) + * @param __PLL2MUL__: This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL2_MUL_8 + * @arg @ref LL_RCC_PLL2_MUL_9 + * @arg @ref LL_RCC_PLL2_MUL_10 + * @arg @ref LL_RCC_PLL2_MUL_11 + * @arg @ref LL_RCC_PLL2_MUL_12 + * @arg @ref LL_RCC_PLL2_MUL_13 + * @arg @ref LL_RCC_PLL2_MUL_14 + * @arg @ref LL_RCC_PLL2_MUL_16 + * @arg @ref LL_RCC_PLL2_MUL_20 + * @param __PLL2DIV__: This parameter can be one of the following values: + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_1 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_2 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_3 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_4 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_5 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_6 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_7 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_8 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_9 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_10 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_11 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_12 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_13 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_14 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_15 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_16 + * @retval PLL2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLL2CLK_FREQ(__INPUTFREQ__, __PLL2MUL__, __PLL2DIV__) (((__INPUTFREQ__) * (((__PLL2MUL__) >> RCC_CFGR2_PLL2MUL_Pos) + 2U)) / (((__PLL2DIV__) >> RCC_CFGR2_PREDIV2_Pos) + 1U)) +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @note: __AHBPRESCALER__ be retrieved by @ref LL_RCC_GetAHBPrescaler + * ex: __LL_RCC_CALC_HCLK_FREQ(LL_RCC_GetAHBPrescaler()) + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__: This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @note: __APB1PRESCALER__ be retrieved by @ref LL_RCC_GetAPB1Prescaler + * ex: __LL_RCC_CALC_PCLK1_FREQ(LL_RCC_GetAPB1Prescaler()) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__: This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos]) + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @note: __APB2PRESCALER__ be retrieved by @ref LL_RCC_GetAPB2Prescaler + * ex: __LL_RCC_CALC_PCLK2_FREQ(LL_RCC_GetAPB2Prescaler()) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__: This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos]) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); +} + +#if defined(RCC_CFGR2_PREDIV2) +/** + * @brief Get PREDIV2 division factor + * @rmtoll CFGR2 PREDIV2 LL_RCC_HSE_GetPrediv2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_1 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_2 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_3 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_4 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_5 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_6 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_7 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_8 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_9 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_10 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_11 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_12 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_13 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_14 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_15 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_GetPrediv2(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV2)); +} +#endif /* RCC_CFGR2_PREDIV2 */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 16, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value between Min_Data = 0x00 and Max_Data = 0x1F + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0x00 and Max_Data = 0x1F + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); +} + +/** + * @brief Set APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); +} + +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); +} + +/** + * @brief Get APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 + * @arg @ref LL_RCC_MCO1SOURCE_PLL2CLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLI2SCLK_DIV2 (*) + * @arg @ref LL_RCC_MCO1SOURCE_EXT_HSE (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLI2SCLK (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL, MCOxSource); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +#if defined(RCC_CFGR2_I2S2SRC) +/** + * @brief Configure I2Sx clock source + * @rmtoll CFGR2 I2S2SRC LL_RCC_SetI2SClockSource\n + * CFGR2 I2S3SRC LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S_VCO + * @arg @ref LL_RCC_I2S3_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S3_CLKSOURCE_PLLI2S_VCO + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CFGR2, (I2SxSource & 0xFFFF0000U), (I2SxSource << 16U)); +} +#endif /* RCC_CFGR2_I2S2SRC */ + +#if defined(USB_OTG_FS) || defined(USB) +/** + * @brief Configure USB clock source + * @rmtoll CFGR OTGFSPRE LL_RCC_SetUSBClockSource\n + * CFGR USBPRE LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_2 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_3 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ +#if defined(RCC_CFGR_USBPRE) + MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, USBxSource); +#else /*RCC_CFGR_OTGFSPRE*/ + MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, USBxSource); +#endif /*RCC_CFGR_USBPRE*/ +} +#endif /* USB_OTG_FS || USB */ + +/** + * @brief Configure ADC clock source + * @rmtoll CFGR ADCPRE LL_RCC_SetADCClockSource + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_2 + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_4 + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_6 + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, ADCxSource); +} + +#if defined(RCC_CFGR2_I2S2SRC) +/** + * @brief Get I2Sx clock source + * @rmtoll CFGR2 I2S2SRC LL_RCC_GetI2SClockSource\n + * CFGR2 I2S3SRC LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S2_CLKSOURCE + * @arg @ref LL_RCC_I2S3_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S_VCO + * @arg @ref LL_RCC_I2S3_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S3_CLKSOURCE_PLLI2S_VCO + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR2, I2Sx) >> 16U | I2Sx); +} +#endif /* RCC_CFGR2_I2S2SRC */ + +#if defined(USB_OTG_FS) || defined(USB) +/** + * @brief Get USBx clock source + * @rmtoll CFGR OTGFSPRE LL_RCC_GetUSBClockSource\n + * CFGR USBPRE LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_2 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_3 (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, USBx)); +} +#endif /* USB_OTG_FS || USB */ + +/** + * @brief Get ADCx clock source + * @rmtoll CFGR ADCPRE LL_RCC_GetADCClockSource + * @param ADCx This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_2 + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_4 + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_6 + * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, ADCx)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed any more unless + * the Backup domain is reset. The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV128 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR PLLXTPRE LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR PLLMULL LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR2 PREDIV1 LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR2 PREDIV1SRC LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_1 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_2 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_3 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_4 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_5 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_6 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_7 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_8 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_9 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_10 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_11 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_12 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_13 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_14 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_15 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_16 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_1 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_2 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_3 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_4 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_5 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_6 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_7 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_8 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_9 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_10 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_11 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_12 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_13 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_14 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_15 (*) + * @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_16 (*) + * + * (*) value not defined in all devices + * @param PLLMul This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 (*) + * @arg @ref LL_RCC_PLL_MUL_3 (*) + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_6_5 (*) + * @arg @ref LL_RCC_PLL_MUL_10 (*) + * @arg @ref LL_RCC_PLL_MUL_11 (*) + * @arg @ref LL_RCC_PLL_MUL_12 (*) + * @arg @ref LL_RCC_PLL_MUL_13 (*) + * @arg @ref LL_RCC_PLL_MUL_14 (*) + * @arg @ref LL_RCC_PLL_MUL_15 (*) + * @arg @ref LL_RCC_PLL_MUL_16 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL, + (Source & (RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE)) | PLLMul); +#if defined(RCC_CFGR2_PREDIV1) +#if defined(RCC_CFGR2_PREDIV1SRC) + MODIFY_REG(RCC->CFGR2, (RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC), + (Source & RCC_CFGR2_PREDIV1) | ((Source & (RCC_CFGR2_PREDIV1SRC << 4U)) >> 4U)); +#else + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (Source & RCC_CFGR2_PREDIV1)); +#endif /*RCC_CFGR2_PREDIV1SRC*/ +#endif /*RCC_CFGR2_PREDIV1*/ +} + +/** + * @brief Configure PLL clock source + * @rmtoll CFGR PLLSRC LL_RCC_PLL_SetMainSource\n + * CFGR2 PREDIV1SRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_PLL2 (*) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ +#if defined(RCC_CFGR2_PREDIV1SRC) + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC, ((PLLSource & (RCC_CFGR2_PREDIV1SRC << 4U)) >> 4U)); +#endif /* RCC_CFGR2_PREDIV1SRC */ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll CFGR PLLSRC LL_RCC_PLL_GetMainSource\n + * CFGR2 PREDIV1SRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_PLL2 (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ +#if defined(RCC_CFGR2_PREDIV1SRC) + uint32_t pllsrc = READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC); + uint32_t predivsrc = (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC) << 4U); + return (uint32_t)(pllsrc | predivsrc); +#else + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)); +#endif /*RCC_CFGR2_PREDIV1SRC*/ +} + +/** + * @brief Get PLL multiplication Factor + * @rmtoll CFGR PLLMULL LL_RCC_PLL_GetMultiplicator + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 (*) + * @arg @ref LL_RCC_PLL_MUL_3 (*) + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_6_5 (*) + * @arg @ref LL_RCC_PLL_MUL_10 (*) + * @arg @ref LL_RCC_PLL_MUL_11 (*) + * @arg @ref LL_RCC_PLL_MUL_12 (*) + * @arg @ref LL_RCC_PLL_MUL_13 (*) + * @arg @ref LL_RCC_PLL_MUL_14 (*) + * @arg @ref LL_RCC_PLL_MUL_15 (*) + * @arg @ref LL_RCC_PLL_MUL_16 (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMultiplicator(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLMULL)); +} + +/** + * @brief Get PREDIV1 division factor for the main PLL + * @note They can be written only when the PLL is disabled + * @rmtoll CFGR2 PREDIV1 LL_RCC_PLL_GetPrediv\n + * CFGR2 PLLXTPRE LL_RCC_PLL_GetPrediv + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PREDIV_DIV_1 + * @arg @ref LL_RCC_PREDIV_DIV_2 + * @arg @ref LL_RCC_PREDIV_DIV_3 (*) + * @arg @ref LL_RCC_PREDIV_DIV_4 (*) + * @arg @ref LL_RCC_PREDIV_DIV_5 (*) + * @arg @ref LL_RCC_PREDIV_DIV_6 (*) + * @arg @ref LL_RCC_PREDIV_DIV_7 (*) + * @arg @ref LL_RCC_PREDIV_DIV_8 (*) + * @arg @ref LL_RCC_PREDIV_DIV_9 (*) + * @arg @ref LL_RCC_PREDIV_DIV_10 (*) + * @arg @ref LL_RCC_PREDIV_DIV_11 (*) + * @arg @ref LL_RCC_PREDIV_DIV_12 (*) + * @arg @ref LL_RCC_PREDIV_DIV_13 (*) + * @arg @ref LL_RCC_PREDIV_DIV_14 (*) + * @arg @ref LL_RCC_PREDIV_DIV_15 (*) + * @arg @ref LL_RCC_PREDIV_DIV_16 (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void) +{ +#if defined(RCC_CFGR2_PREDIV1) + return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1)); +#else + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos); +#endif /*RCC_CFGR2_PREDIV1*/ +} + +/** + * @} + */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** @defgroup RCC_LL_EF_PLLI2S PLLI2S + * @{ + */ + +/** + * @brief Enable PLLI2S + * @rmtoll CR PLL3ON LL_RCC_PLLI2S_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Disable PLLI2S + * @rmtoll CR PLL3ON LL_RCC_PLLI2S_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Check if PLLI2S Ready + * @rmtoll CR PLL3RDY LL_RCC_PLLI2S_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLL3RDY) == (RCC_CR_PLL3RDY)); +} + +/** + * @brief Configure PLLI2S used for I2S Domain + * @rmtoll CFGR2 PREDIV2 LL_RCC_PLL_ConfigDomain_PLLI2S\n + * CFGR2 PLL3MUL LL_RCC_PLL_ConfigDomain_PLLI2S + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_1 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_2 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_3 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_4 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_5 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_6 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_7 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_8 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_9 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_10 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_11 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_12 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_13 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_14 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_15 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_16 + * @param Multiplicator This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2S_MUL_8 + * @arg @ref LL_RCC_PLLI2S_MUL_9 + * @arg @ref LL_RCC_PLLI2S_MUL_10 + * @arg @ref LL_RCC_PLLI2S_MUL_11 + * @arg @ref LL_RCC_PLLI2S_MUL_12 + * @arg @ref LL_RCC_PLLI2S_MUL_13 + * @arg @ref LL_RCC_PLLI2S_MUL_14 + * @arg @ref LL_RCC_PLLI2S_MUL_16 + * @arg @ref LL_RCC_PLLI2S_MUL_20 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_PLLI2S(uint32_t Divider, uint32_t Multiplicator) +{ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL3MUL, Divider | Multiplicator); +} + +/** + * @brief Get PLLI2S Multiplication Factor + * @rmtoll CFGR2 PLL3MUL LL_RCC_PLLI2S_GetMultiplicator + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2S_MUL_8 + * @arg @ref LL_RCC_PLLI2S_MUL_9 + * @arg @ref LL_RCC_PLLI2S_MUL_10 + * @arg @ref LL_RCC_PLLI2S_MUL_11 + * @arg @ref LL_RCC_PLLI2S_MUL_12 + * @arg @ref LL_RCC_PLLI2S_MUL_13 + * @arg @ref LL_RCC_PLLI2S_MUL_14 + * @arg @ref LL_RCC_PLLI2S_MUL_16 + * @arg @ref LL_RCC_PLLI2S_MUL_20 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetMultiplicator(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL)); +} + +/** + * @} + */ +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** @defgroup RCC_LL_EF_PLL2 PLL2 + * @{ + */ + +/** + * @brief Enable PLL2 + * @rmtoll CR PLL2ON LL_RCC_PLL2_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Disable PLL2 + * @rmtoll CR PLL2ON LL_RCC_PLL2_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Check if PLL2 Ready + * @rmtoll CR PLL2RDY LL_RCC_PLL2_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLL2RDY) == (RCC_CR_PLL2RDY)); +} + +/** + * @brief Configure PLL2 used for PLL2 Domain + * @rmtoll CFGR2 PREDIV2 LL_RCC_PLL_ConfigDomain_PLL2\n + * CFGR2 PLL2MUL LL_RCC_PLL_ConfigDomain_PLL2 + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_1 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_2 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_3 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_4 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_5 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_6 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_7 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_8 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_9 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_10 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_11 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_12 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_13 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_14 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_15 + * @arg @ref LL_RCC_HSE_PREDIV2_DIV_16 + * @param Multiplicator This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL2_MUL_8 + * @arg @ref LL_RCC_PLL2_MUL_9 + * @arg @ref LL_RCC_PLL2_MUL_10 + * @arg @ref LL_RCC_PLL2_MUL_11 + * @arg @ref LL_RCC_PLL2_MUL_12 + * @arg @ref LL_RCC_PLL2_MUL_13 + * @arg @ref LL_RCC_PLL2_MUL_14 + * @arg @ref LL_RCC_PLL2_MUL_16 + * @arg @ref LL_RCC_PLL2_MUL_20 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_PLL2(uint32_t Divider, uint32_t Multiplicator) +{ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL, Divider | Multiplicator); +} + +/** + * @brief Get PLL2 Multiplication Factor + * @rmtoll CFGR2 PLL2MUL LL_RCC_PLL2_GetMultiplicator + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL2_MUL_8 + * @arg @ref LL_RCC_PLL2_MUL_9 + * @arg @ref LL_RCC_PLL2_MUL_10 + * @arg @ref LL_RCC_PLL2_MUL_11 + * @arg @ref LL_RCC_PLL2_MUL_12 + * @arg @ref LL_RCC_PLL2_MUL_13 + * @arg @ref LL_RCC_PLL2_MUL_14 + * @arg @ref LL_RCC_PLL2_MUL_16 + * @arg @ref LL_RCC_PLL2_MUL_20 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetMultiplicator(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL2MUL)); +} + +/** + * @} + */ +#endif /* RCC_PLL2_SUPPORT */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Clear PLLI2S ready interrupt flag + * @rmtoll CIR PLL3RDYC LL_RCC_ClearFlag_PLLI2SRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLL3RDYC); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Clear PLL2 ready interrupt flag + * @rmtoll CIR PLL2RDYC LL_RCC_ClearFlag_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL2RDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLL2RDYC); +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_CSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Check if PLLI2S ready interrupt occurred or not + * @rmtoll CIR PLL3RDYF LL_RCC_IsActiveFlag_PLLI2SRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLL3RDYF) == (RCC_CIR_PLL3RDYF)); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Check if PLL2 ready interrupt occurred or not + * @rmtoll CIR PLL2RDYF LL_RCC_IsActiveFlag_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL2RDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLL2RDYF) == (RCC_CIR_PLL2RDYF)); +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); +} + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Enable PLLI2S ready interrupt + * @rmtoll CIR PLL3RDYIE LL_RCC_EnableIT_PLLI2SRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLL3RDYIE); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Enable PLL2 ready interrupt + * @rmtoll CIR PLL2RDYIE LL_RCC_EnableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL2RDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLL2RDYIE); +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Disable PLLI2S ready interrupt + * @rmtoll CIR PLL3RDYIE LL_RCC_DisableIT_PLLI2SRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLL3RDYIE); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Disable PLL2 ready interrupt + * @rmtoll CIR PLL2RDYIE LL_RCC_DisableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL2RDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLL2RDYIE); +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Checks if PLLI2S ready interrupt source is enabled or disabled. + * @rmtoll CIR PLL3RDYIE LL_RCC_IsEnabledIT_PLLI2SRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLL3RDYIE) == (RCC_CIR_PLL3RDYIE)); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Checks if PLL2 ready interrupt source is enabled or disabled. + * @rmtoll CIR PLL2RDYIE LL_RCC_IsEnabledIT_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLL2RDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLL2RDYIE) == (RCC_CIR_PLL2RDYIE)); +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +#if defined(RCC_CFGR2_I2S2SRC) +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +#endif /* RCC_CFGR2_I2S2SRC */ +#if defined(USB_OTG_FS) || defined(USB) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* USB_OTG_FS || USB */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rtc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rtc.h new file mode 100644 index 0000000..df36987 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rtc.h @@ -0,0 +1,1003 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_rtc.h + * @author MCD Application Team + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_RTC_H +#define __STM32F1xx_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t OutPutSource; /*!< Specifies which signal will be routed to the RTC Tamper pin. + This parameter can be a value of @ref LL_RTC_Output_Source + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetOutputSource(). */ + +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ +} LL_RTC_TimeTypeDef; + + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN (0x000000000U) /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD (0x000000001U) /*!< BCD data format */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_BKP BACKUP + * @{ + */ +#if RTC_BKP_NUMBER > 0 +#define LL_RTC_BKP_DR1 (0x00000001U) +#define LL_RTC_BKP_DR2 (0x00000002U) +#define LL_RTC_BKP_DR3 (0x00000003U) +#define LL_RTC_BKP_DR4 (0x00000004U) +#define LL_RTC_BKP_DR5 (0x00000005U) +#define LL_RTC_BKP_DR6 (0x00000006U) +#define LL_RTC_BKP_DR7 (0x00000007U) +#define LL_RTC_BKP_DR8 (0x00000008U) +#define LL_RTC_BKP_DR9 (0x00000009U) +#define LL_RTC_BKP_DR10 (0x0000000AU) +#endif /* RTC_BKP_NUMBER > 0 */ +#if RTC_BKP_NUMBER > 10 +#define LL_RTC_BKP_DR11 (0x00000010U) +#define LL_RTC_BKP_DR12 (0x00000011U) +#define LL_RTC_BKP_DR13 (0x00000012U) +#define LL_RTC_BKP_DR14 (0x00000013U) +#define LL_RTC_BKP_DR15 (0x00000014U) +#define LL_RTC_BKP_DR16 (0x00000015U) +#define LL_RTC_BKP_DR17 (0x00000016U) +#define LL_RTC_BKP_DR18 (0x00000017U) +#define LL_RTC_BKP_DR19 (0x00000018U) +#define LL_RTC_BKP_DR20 (0x00000019U) +#define LL_RTC_BKP_DR21 (0x0000001AU) +#define LL_RTC_BKP_DR22 (0x0000001BU) +#define LL_RTC_BKP_DR23 (0x0000001CU) +#define LL_RTC_BKP_DR24 (0x0000001DU) +#define LL_RTC_BKP_DR25 (0x0000001EU) +#define LL_RTC_BKP_DR26 (0x0000001FU) +#define LL_RTC_BKP_DR27 (0x00000020U) +#define LL_RTC_BKP_DR28 (0x00000021U) +#define LL_RTC_BKP_DR29 (0x00000022U) +#define LL_RTC_BKP_DR30 (0x00000023U) +#define LL_RTC_BKP_DR31 (0x00000024U) +#define LL_RTC_BKP_DR32 (0x00000025U) +#define LL_RTC_BKP_DR33 (0x00000026U) +#define LL_RTC_BKP_DR34 (0x00000027U) +#define LL_RTC_BKP_DR35 (0x00000028U) +#define LL_RTC_BKP_DR36 (0x00000029U) +#define LL_RTC_BKP_DR37 (0x0000002AU) +#define LL_RTC_BKP_DR38 (0x0000002BU) +#define LL_RTC_BKP_DR39 (0x0000002CU) +#define LL_RTC_BKP_DR40 (0x0000002DU) +#define LL_RTC_BKP_DR41 (0x0000002EU) +#define LL_RTC_BKP_DR42 (0x0000002FU) +#endif /* RTC_BKP_NUMBER > 10 */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPLEVEL Tamper Active Level + * @{ + */ +#define LL_RTC_TAMPER_ACTIVELEVEL_LOW BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */ +#define LL_RTC_TAMPER_ACTIVELEVEL_HIGH (0x00000000U) /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */ + +/** + * @} + */ + +/** @defgroup LL_RTC_Output_Source Clock Source to output on the Tamper Pin + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE (0x00000000U) /*!< Calibration output disabled */ +#define LL_RTC_CALIB_OUTPUT_RTCCLOCK BKP_RTCCR_CCO /*!< Calibration output is RTC Clock with a frequency divided by 64 on the TAMPER Pin */ +#define LL_RTC_CALIB_OUTPUT_ALARM BKP_RTCCR_ASOE /*!< Calibration output is Alarm pulse signal on the TAMPER pin */ +#define LL_RTC_CALIB_OUTPUT_SECOND (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE) /*!< Calibration output is Second pulse signal on the TAMPER pin*/ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll PRLH PRL LL_RTC_SetAsynchPrescaler\n + * @rmtoll PRLL PRL LL_RTC_SetAsynchPrescaler\n + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRLH, RTC_PRLH_PRL, (AsynchPrescaler >> 16)); + MODIFY_REG(RTCx->PRLL, RTC_PRLL_PRL, (AsynchPrescaler & RTC_PRLL_PRL)); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll DIVH DIV LL_RTC_GetDivider\n + * @rmtoll DIVL DIV LL_RTC_GetDivider\n + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0xFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetDivider(RTC_TypeDef *RTCx) +{ + register uint16_t Highprescaler = 0, Lowprescaler = 0; + Highprescaler = READ_REG(RTCx->DIVH & RTC_DIVH_RTC_DIV); + Lowprescaler = READ_REG(RTCx->DIVL & RTC_DIVL_RTC_DIV); + + return (((uint32_t) Highprescaler << 16U) | Lowprescaler); +} + +/** + * @brief Set Output Source + * @rmtoll RTCCR CCO LL_RTC_SetOutputSource + * @rmtoll RTCCR ASOE LL_RTC_SetOutputSource + * @rmtoll RTCCR ASOS LL_RTC_SetOutputSource + * @param BKPx BKP Instance + * @param OutputSource This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_RTCCLOCK + * @arg @ref LL_RTC_CALIB_OUTPUT_ALARM + * @arg @ref LL_RTC_CALIB_OUTPUT_SECOND + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputSource(BKP_TypeDef *BKPx, uint32_t OutputSource) +{ + MODIFY_REG(BKPx->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS), OutputSource); +} + +/** + * @brief Get Output Source + * @rmtoll RTCCR CCO LL_RTC_GetOutPutSource + * @rmtoll RTCCR ASOE LL_RTC_GetOutPutSource + * @rmtoll RTCCR ASOS LL_RTC_GetOutPutSource + * @param BKPx BKP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_RTCCLOCK + * @arg @ref LL_RTC_CALIB_OUTPUT_ALARM + * @arg @ref LL_RTC_CALIB_OUTPUT_SECOND + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutPutSource(BKP_TypeDef *BKPx) +{ + return (uint32_t)(READ_BIT(BKPx->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS))); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll CRL CNF LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRL, RTC_CRL_CNF); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll CRL RTC_CRL_CNF LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CRL, RTC_CRL_CNF); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time counter in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnterInitMode function) + * @rmtoll CNTH CNT LL_RTC_TIME_Set\n + * CNTL CNT LL_RTC_TIME_Set\n + * @param RTCx RTC Instance + * @param TimeCounter Value between Min_Data=0x00 and Max_Data=0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Set(RTC_TypeDef *RTCx, uint32_t TimeCounter) +{ + /* Set RTC COUNTER MSB word */ + WRITE_REG(RTCx->CNTH, (TimeCounter >> 16U)); + /* Set RTC COUNTER LSB word */ + WRITE_REG(RTCx->CNTL, (TimeCounter & RTC_CNTL_RTC_CNT)); +} + +/** + * @brief Get time counter in BCD format + * @rmtoll CNTH CNT LL_RTC_TIME_Get\n + * CNTL CNT LL_RTC_TIME_Get\n + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0xFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) +{ + register uint16_t high = 0, low = 0; + + high = READ_REG(RTCx->CNTH & RTC_CNTH_RTC_CNT); + low = READ_REG(RTCx->CNTL & RTC_CNTL_RTC_CNT); + return ((uint32_t)(((uint32_t) high << 16U) | low)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARM ALARM + * @{ + */ + +/** + * @brief Set Alarm Counter + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll ALRH ALR LL_RTC_ALARM_Set\n + * @rmtoll ALRL ALR LL_RTC_ALARM_Set\n + * @param RTCx RTC Instance + * @param AlarmCounter Value between Min_Data=0x00 and Max_Data=0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALARM_Set(RTC_TypeDef *RTCx, uint32_t AlarmCounter) +{ + /* Set RTC COUNTER MSB word */ + WRITE_REG(RTCx->ALRH, (AlarmCounter >> 16)); + /* Set RTC COUNTER LSB word */ + WRITE_REG(RTCx->ALRL, (AlarmCounter & RTC_ALRL_RTC_ALR)); +} + +/** + * @brief Get Alarm Counter + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll ALRH ALR LL_RTC_ALARM_Get\n + * @rmtoll ALRL ALR LL_RTC_ALARM_Get\n + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_RTC_ALARM_Get(RTC_TypeDef *RTCx) +{ + register uint16_t high = 0, low = 0; + + high = READ_REG(RTCx->ALRH & RTC_ALRH_RTC_ALR); + low = READ_REG(RTCx->ALRL & RTC_ALRL_RTC_ALR); + + return (((uint32_t) high << 16U) | low); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Tamper Tamper + * @{ + */ + +/** + * @brief Enable RTC_TAMPx input detection + * @rmtoll CR TPE LL_RTC_TAMPER_Enable\n + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Enable(BKP_TypeDef *BKPx) +{ + SET_BIT(BKPx->CR, BKP_CR_TPE); +} + +/** + * @brief Disable RTC_TAMPx Tamper + * @rmtoll CR TPE LL_RTC_TAMPER_Disable\n + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Disable(BKP_TypeDef *BKPx) +{ + CLEAR_BIT(BKP->CR, BKP_CR_TPE); +} + +/** + * @brief Enable Active level for Tamper input + * @rmtoll CR TPAL LL_RTC_TAMPER_SetActiveLevel\n + * @param BKPx BKP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_LOW + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetActiveLevel(BKP_TypeDef *BKPx, uint32_t Tamper) +{ + MODIFY_REG(BKPx->CR, BKP_CR_TPAL, Tamper); +} + +/** + * @brief Disable Active level for Tamper input + * @rmtoll CR TPAL LL_RTC_TAMPER_SetActiveLevel\n + * @retval None + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetActiveLevel(BKP_TypeDef *BKPx) +{ + return (uint32_t)(READ_BIT(BKPx->CR, BKP_CR_TPAL)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @rmtoll BKPDR DR LL_RTC_BKP_SetRegister + * @param BKPx BKP Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg @ref LL_RTC_BKP_DR5 + * @arg @ref LL_RTC_BKP_DR6 + * @arg @ref LL_RTC_BKP_DR7 + * @arg @ref LL_RTC_BKP_DR8 + * @arg @ref LL_RTC_BKP_DR9 + * @arg @ref LL_RTC_BKP_DR10 + * @arg @ref LL_RTC_BKP_DR11 (*) + * @arg @ref LL_RTC_BKP_DR12 (*) + * @arg @ref LL_RTC_BKP_DR13 (*) + * @arg @ref LL_RTC_BKP_DR14 (*) + * @arg @ref LL_RTC_BKP_DR15 (*) + * @arg @ref LL_RTC_BKP_DR16 (*) + * @arg @ref LL_RTC_BKP_DR17 (*) + * @arg @ref LL_RTC_BKP_DR18 (*) + * @arg @ref LL_RTC_BKP_DR19 (*) + * @arg @ref LL_RTC_BKP_DR20 (*) + * @arg @ref LL_RTC_BKP_DR21 (*) + * @arg @ref LL_RTC_BKP_DR22 (*) + * @arg @ref LL_RTC_BKP_DR23 (*) + * @arg @ref LL_RTC_BKP_DR24 (*) + * @arg @ref LL_RTC_BKP_DR25 (*) + * @arg @ref LL_RTC_BKP_DR26 (*) + * @arg @ref LL_RTC_BKP_DR27 (*) + * @arg @ref LL_RTC_BKP_DR28 (*) + * @arg @ref LL_RTC_BKP_DR29 (*) + * @arg @ref LL_RTC_BKP_DR30 (*) + * @arg @ref LL_RTC_BKP_DR31 (*) + * @arg @ref LL_RTC_BKP_DR32 (*) + * @arg @ref LL_RTC_BKP_DR33 (*) + * @arg @ref LL_RTC_BKP_DR34 (*) + * @arg @ref LL_RTC_BKP_DR35 (*) + * @arg @ref LL_RTC_BKP_DR36 (*) + * @arg @ref LL_RTC_BKP_DR37 (*) + * @arg @ref LL_RTC_BKP_DR38 (*) + * @arg @ref LL_RTC_BKP_DR39 (*) + * @arg @ref LL_RTC_BKP_DR40 (*) + * @arg @ref LL_RTC_BKP_DR41 (*) + * @arg @ref LL_RTC_BKP_DR42 (*) + * (*) value not defined in all devices. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_BKP_SetRegister(BKP_TypeDef *BKPx, uint32_t BackupRegister, uint32_t Data) +{ + register uint32_t tmp = 0U; + + tmp = (uint32_t)BKP_BASE; + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @rmtoll BKPDR DR LL_RTC_BKP_GetRegister + * @param BKPx BKP Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg @ref LL_RTC_BKP_DR5 + * @arg @ref LL_RTC_BKP_DR6 + * @arg @ref LL_RTC_BKP_DR7 + * @arg @ref LL_RTC_BKP_DR8 + * @arg @ref LL_RTC_BKP_DR9 + * @arg @ref LL_RTC_BKP_DR10 + * @arg @ref LL_RTC_BKP_DR11 (*) + * @arg @ref LL_RTC_BKP_DR12 (*) + * @arg @ref LL_RTC_BKP_DR13 (*) + * @arg @ref LL_RTC_BKP_DR14 (*) + * @arg @ref LL_RTC_BKP_DR15 (*) + * @arg @ref LL_RTC_BKP_DR16 (*) + * @arg @ref LL_RTC_BKP_DR17 (*) + * @arg @ref LL_RTC_BKP_DR18 (*) + * @arg @ref LL_RTC_BKP_DR19 (*) + * @arg @ref LL_RTC_BKP_DR20 (*) + * @arg @ref LL_RTC_BKP_DR21 (*) + * @arg @ref LL_RTC_BKP_DR22 (*) + * @arg @ref LL_RTC_BKP_DR23 (*) + * @arg @ref LL_RTC_BKP_DR24 (*) + * @arg @ref LL_RTC_BKP_DR25 (*) + * @arg @ref LL_RTC_BKP_DR26 (*) + * @arg @ref LL_RTC_BKP_DR27 (*) + * @arg @ref LL_RTC_BKP_DR28 (*) + * @arg @ref LL_RTC_BKP_DR29 (*) + * @arg @ref LL_RTC_BKP_DR30 (*) + * @arg @ref LL_RTC_BKP_DR31 (*) + * @arg @ref LL_RTC_BKP_DR32 (*) + * @arg @ref LL_RTC_BKP_DR33 (*) + * @arg @ref LL_RTC_BKP_DR34 (*) + * @arg @ref LL_RTC_BKP_DR35 (*) + * @arg @ref LL_RTC_BKP_DR36 (*) + * @arg @ref LL_RTC_BKP_DR37 (*) + * @arg @ref LL_RTC_BKP_DR38 (*) + * @arg @ref LL_RTC_BKP_DR39 (*) + * @arg @ref LL_RTC_BKP_DR40 (*) + * @arg @ref LL_RTC_BKP_DR41 (*) + * @arg @ref LL_RTC_BKP_DR42 (*) + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_BKP_GetRegister(BKP_TypeDef *BKPx, uint32_t BackupRegister) +{ + register uint32_t tmp = 0U; + + tmp = (uint32_t)BKP_BASE; + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return ((*(__IO uint32_t *)tmp) & BKP_DR1_D); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +/** + * @brief Set the coarse digital calibration + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnterInitMode function) + * @rmtoll RTCCR CAL LL_RTC_CAL_SetCoarseDigital\n + * @param BKPx RTC Instance + * @param Value value of coarse calibration expressed in ppm (coded on 5 bits) + * @note This Calibration value should be between 0 and 121 when using positive sign with a 4-ppm step. + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetCoarseDigital(BKP_TypeDef *BKPx, uint32_t Value) +{ + MODIFY_REG(BKPx->RTCCR, BKP_RTCCR_CAL, Value); +} + +/** + * @brief Get the coarse digital calibration value + * @rmtoll RTCCR CAL LL_RTC_CAL_SetCoarseDigital\n + * @param BKPx BKP Instance + * @retval value of coarse calibration expressed in ppm (coded on 5 bits) + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigital(BKP_TypeDef *BKPx) +{ + return (uint32_t)(READ_BIT(BKPx->RTCCR, BKP_RTCCR_CAL)); +} +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get RTC_TAMPI Interruption detection flag + * @rmtoll CSR TIF LL_RTC_IsActiveFlag_TAMPI + * @param BKPx BKP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMPI(BKP_TypeDef *BKPx) +{ + return (READ_BIT(BKPx->CSR, BKP_CSR_TIF) == (BKP_CSR_TIF)); +} + +/** + * @brief Clear RTC_TAMP Interruption detection flag + * @rmtoll CSR CTI LL_RTC_ClearFlag_TAMPI + * @param BKPx BKP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMPI(BKP_TypeDef *BKPx) +{ + SET_BIT(BKPx->CSR, BKP_CSR_CTI); +} + +/** + * @brief Get RTC_TAMPE Event detection flag + * @rmtoll CSR TEF LL_RTC_IsActiveFlag_TAMPE + * @param BKPx BKP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMPE(BKP_TypeDef *BKPx) +{ + return (READ_BIT(BKPx->CSR, BKP_CSR_TEF) == (BKP_CSR_TEF)); +} + +/** + * @brief Clear RTC_TAMPE Even detection flag + * @rmtoll CSR CTE LL_RTC_ClearFlag_TAMPE + * @param BKPx BKP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMPE(BKP_TypeDef *BKPx) +{ + SET_BIT(BKPx->CSR, BKP_CSR_CTE); +} + +/** + * @brief Get Alarm flag + * @rmtoll CRL ALRF LL_RTC_IsActiveFlag_ALR + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALR(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRL, RTC_CRL_ALRF) == (RTC_CRL_ALRF)); +} + +/** + * @brief Clear Alarm flag + * @rmtoll CRL ALRF LL_RTC_ClearFlag_ALR + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALR(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRL, RTC_CRL_ALRF); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll CRL RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRL, RTC_CRL_RSF) == (RTC_CRL_RSF)); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll CRL RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRL, RTC_CRL_RSF); +} + +/** + * @brief Get Registers OverFlow flag + * @rmtoll CRL OWF LL_RTC_IsActiveFlag_OW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_OW(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRL, RTC_CRL_OWF) == (RTC_CRL_OWF)); +} + +/** + * @brief Clear Registers OverFlow flag + * @rmtoll CRL OWF LL_RTC_ClearFlag_OW + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_OW(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRL, RTC_CRL_OWF); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll CRL SECF LL_RTC_IsActiveFlag_SEC + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SEC(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRL, RTC_CRL_SECF) == (RTC_CRL_SECF)); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll CRL SECF LL_RTC_ClearFlag_SEC + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_SEC(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRL, RTC_CRL_SECF); +} + +/** + * @brief Get RTC Operation OFF status flag + * @rmtoll CRL RTOFF LL_RTC_IsActiveFlag_RTOF + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RTOF(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRL, RTC_CRL_RTOFF) == (RTC_CRL_RTOFF)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Alarm interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CRH ALRIE LL_RTC_EnableIT_ALR + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALR(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CRH, RTC_CRH_ALRIE); +} + +/** + * @brief Disable Alarm interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CRH ALRIE LL_RTC_DisableIT_ALR + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALR(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRH, RTC_CRH_ALRIE); +} + +/** + * @brief Check if Alarm interrupt is enabled or not + * @rmtoll CRH ALRIE LL_RTC_IsEnabledIT_ALR + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALR(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRH, RTC_CRH_ALRIE) == (RTC_CRH_ALRIE)); +} + +/** + * @brief Enable Second Interrupt interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CRH SECIE LL_RTC_EnableIT_SEC + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_SEC(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CRH, RTC_CRH_SECIE); +} + +/** + * @brief Disable Second interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CRH SECIE LL_RTC_DisableIT_SEC + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_SEC(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRH, RTC_CRH_SECIE); +} + +/** + * @brief Check if Second interrupt is enabled or not + * @rmtoll CRH SECIE LL_RTC_IsEnabledIT_SEC + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_SEC(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRH, RTC_CRH_SECIE) == (RTC_CRH_SECIE)); +} + +/** + * @brief Enable OverFlow interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CRH OWIE LL_RTC_EnableIT_OW + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_OW(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CRH, RTC_CRH_OWIE); +} + +/** + * @brief Disable OverFlow interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CRH OWIE LL_RTC_DisableIT_OW + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_OW(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CRH, RTC_CRH_OWIE); +} + +/** + * @brief Check if OverFlow interrupt is enabled or not + * @rmtoll CRH OWIE LL_RTC_IsEnabledIT_OW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_OW(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CRH, RTC_CRH_OWIE) == (RTC_CRH_OWIE)); +} + +/** + * @brief Enable Tamper interrupt + * @rmtoll CSR TPIE LL_RTC_EnableIT_TAMP + * @param BKPx BKP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP(BKP_TypeDef *BKPx) +{ + SET_BIT(BKPx->CSR, BKP_CSR_TPIE); +} + +/** + * @brief Disable Tamper interrupt + * @rmtoll CSR TPIE LL_RTC_EnableIT_TAMP + * @param BKPx BKP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP(BKP_TypeDef *BKPx) +{ + CLEAR_BIT(BKPx->CSR, BKP_CSR_TPIE); +} + +/** + * @brief Check if all the TAMPER interrupts are enabled or not + * @rmtoll CSR TPIE LL_RTC_IsEnabledIT_TAMP + * @param BKPx BKP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP(BKP_TypeDef *BKPx) +{ + return (READ_BIT(BKPx->CSR, BKP_CSR_TPIE) == BKP_CSR_TPIE); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_ALARM_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALARM_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_TIME_SetCounter(RTC_TypeDef *RTCx, uint32_t TimeCounter); +ErrorStatus LL_RTC_ALARM_SetCounter(RTC_TypeDef *RTCx, uint32_t AlarmCounter); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_sdmmc.h similarity index 97% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_sdmmc.h index a4092d0..b394e1b 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_sdmmc.h @@ -1,24 +1,25 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_sdmmc.h + * @file stm32f1xx_ll_sdmmc.h * @author MCD Application Team * @brief Header file of SDMMC HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_SDMMC_H -#define STM32F4xx_LL_SDMMC_H +#ifndef STM32F1xx_LL_SDMMC_H +#define STM32F1xx_LL_SDMMC_H #ifdef __cplusplus extern "C" { @@ -27,9 +28,9 @@ #if defined(SDIO) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -/** @addtogroup STM32F4xx_Driver +/** @addtogroup STM32F1xx_Driver * @{ */ @@ -562,9 +563,7 @@ typedef struct #define SDIO_IT_CMDREND SDIO_MASK_CMDRENDIE #define SDIO_IT_CMDSENT SDIO_MASK_CMDSENTIE #define SDIO_IT_DATAEND SDIO_MASK_DATAENDIE -#if defined(SDIO_STA_STBITERR) #define SDIO_IT_STBITERR SDIO_MASK_STBITERRIE -#endif #define SDIO_IT_DBCKEND SDIO_MASK_DBCKENDIE #define SDIO_IT_CMDACT SDIO_MASK_CMDACTIE #define SDIO_IT_TXACT SDIO_MASK_TXACTIE @@ -578,9 +577,7 @@ typedef struct #define SDIO_IT_TXDAVL SDIO_MASK_TXDAVLIE #define SDIO_IT_RXDAVL SDIO_MASK_RXDAVLIE #define SDIO_IT_SDIOIT SDIO_MASK_SDIOITIE -#if defined(SDIO_CMD_CEATACMD) #define SDIO_IT_CEATAEND SDIO_MASK_CEATAENDIE -#endif /** * @} */ @@ -597,9 +594,7 @@ typedef struct #define SDIO_FLAG_CMDREND SDIO_STA_CMDREND #define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT #define SDIO_FLAG_DATAEND SDIO_STA_DATAEND -#if defined(SDIO_STA_STBITERR) #define SDIO_FLAG_STBITERR SDIO_STA_STBITERR -#endif #define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND #define SDIO_FLAG_CMDACT SDIO_STA_CMDACT #define SDIO_FLAG_TXACT SDIO_STA_TXACT @@ -613,9 +608,7 @@ typedef struct #define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL #define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL #define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT -#if defined(SDIO_CMD_CEATACMD) #define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND -#endif #define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ @@ -720,7 +713,7 @@ typedef struct #define SDIO_INIT_CLK_DIV ((uint8_t)0x76) /* 48MHz / (SDMMC_INIT_CLK_DIV + 2) < 400KHz */ /* SDIO Data Transfer Frequency (25MHz max) */ -#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) /* 48MHz / (SDMMC_TRANSFER_CLK_DIV + 2) < 25MHz */ +#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x4) /** * @} */ @@ -978,7 +971,6 @@ typedef struct */ #define __SDIO_SUSPEND_CMD_DISABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) -#if defined(SDIO_CMD_CEATACMD) /** * @brief Enable the command completion signal. * @retval None @@ -1015,7 +1007,6 @@ typedef struct */ #define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) -#endif /** * @} */ @@ -1068,14 +1059,8 @@ uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); /* SDMMC Cards mode management functions */ HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode); -/** - * @} - */ /* SDMMC Commands management functions */ -/** @addtogroup HAL_SDMMC_LL_Group4 - * @{ - */ uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize); uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); @@ -1096,26 +1081,13 @@ uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth); uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); +uint32_t SDMMC_CmdSendEXTCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA); -uint32_t SDMMC_CmdSetRelAddMmc(SDIO_TypeDef *SDIOx, uint16_t RCA); uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument); -uint32_t SDMMC_CmdSendEXTCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); -/** - * @} - */ -/* SDMMC Responses management functions *****************************************/ -/** @addtogroup HAL_SDMMC_LL_Group5 - * @{ - */ -uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout); -uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA); -uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx); /** * @} */ @@ -1138,4 +1110,6 @@ uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx); } #endif -#endif /* STM32F4xx_LL_SDMMC_H */ +#endif /* STM32F1xx_LL_SDMMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h index 4f3b030..5b654d5 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h @@ -1,37 +1,38 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_spi.h + * @file stm32f1xx_ll_spi.h * @author MCD Application Team * @brief Header file of SPI LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_SPI_H -#define STM32F4xx_LL_SPI_H +#ifndef STM32F1xx_LL_SPI_H +#define STM32F1xx_LL_SPI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (SPI1) || defined (SPI2) || defined (SPI3) || defined (SPI4) || defined (SPI5) || defined(SPI6) +#if defined (SPI1) || defined (SPI2) || defined (SPI3) /** @defgroup SPI_LL SPI * @{ @@ -150,14 +151,6 @@ typedef struct * @} */ -/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol - * @{ - */ -#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */ -#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ -/** - * @} - */ /** @defgroup SPI_LL_EC_PHASE Clock Phase * @{ @@ -352,33 +345,6 @@ __STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); } -/** - * @brief Set serial protocol used - * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. - * @rmtoll CR2 FRF LL_SPI_SetStandard - * @param SPIx SPI Instance - * @param Standard This parameter can be one of the following values: - * @arg @ref LL_SPI_PROTOCOL_MOTOROLA - * @arg @ref LL_SPI_PROTOCOL_TI - * @retval None - */ -__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) -{ - MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); -} - -/** - * @brief Get serial protocol used - * @rmtoll CR2 FRF LL_SPI_GetStandard - * @param SPIx SPI Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_SPI_PROTOCOL_MOTOROLA - * @arg @ref LL_SPI_PROTOCOL_TI - */ -__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) -{ - return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); -} /** * @brief Set clock phase @@ -795,16 +761,6 @@ __STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL); } -/** - * @brief Get frame format error flag - * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE - * @param SPIx SPI Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) -{ - return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL); -} /** * @brief Clear CRC error flag @@ -1146,6 +1102,7 @@ void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); * @} */ +#if defined(SPI_I2S_SUPPORT) /** @defgroup I2S_LL I2S * @{ */ @@ -1611,41 +1568,6 @@ __STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); } -#if defined(SPI_I2SCFGR_ASTRTEN) -/** - * @brief Enable asynchronous start - * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart - * @param SPIx SPI Instance - * @retval None - */ -__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) -{ - SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); -} - -/** - * @brief Disable asynchronous start - * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart - * @param SPIx SPI Instance - * @retval None - */ -__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) -{ - CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); -} - -/** - * @brief Check if asynchronous start is enabled - * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart - * @param SPIx SPI Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) -{ - return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); -} -#endif /* SPI_I2SCFGR_ASTRTEN */ - /** * @} */ @@ -1709,16 +1631,6 @@ __STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); } -/** - * @brief Get frame format error flag - * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE - * @param SPIx SPI Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) -{ - return LL_SPI_IsActiveFlag_FRE(SPIx); -} /** * @brief Get channel side flag. @@ -1996,9 +1908,6 @@ ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) -ErrorStatus LL_I2S_InitFullDuplex(SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S_InitStruct); -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ /** * @} @@ -2012,8 +1921,9 @@ ErrorStatus LL_I2S_InitFullDuplex(SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S_ /** * @} */ +#endif /* SPI_I2S_SUPPORT */ -#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) || defined (SPI4) || defined (SPI5) || defined(SPI6) */ +#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */ /** * @} @@ -2023,5 +1933,6 @@ ErrorStatus LL_I2S_InitFullDuplex(SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S_ } #endif -#endif /* STM32F4xx_LL_SPI_H */ +#endif /* STM32F1xx_LL_SPI_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h new file mode 100644 index 0000000..f62c1d2 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h @@ -0,0 +1,574 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_SYSTEM_H +#define __STM32F1xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (DBGMCU) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + + + +/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment + * @{ + */ +#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ +#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_CR_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_CR_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_CR_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ +#if defined(DBGMCU_CR_DBG_TIM5_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_CR_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM5_STOP */ +#if defined(DBGMCU_CR_DBG_TIM6_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_CR_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM6_STOP */ +#if defined(DBGMCU_CR_DBG_TIM7_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_CR_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM7_STOP */ +#if defined(DBGMCU_CR_DBG_TIM12_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_CR_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM12_STOP */ +#if defined(DBGMCU_CR_DBG_TIM13_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_CR_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM13_STOP */ +#if defined(DBGMCU_CR_DBG_TIM14_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_CR_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM14_STOP */ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_CR_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_CR_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#if defined(DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ +#endif /* DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT */ +#if defined(DBGMCU_CR_DBG_CAN1_STOP) +#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_CR_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */ +#endif /* DBGMCU_CR_DBG_CAN1_STOP */ +#if defined(DBGMCU_CR_DBG_CAN2_STOP) +#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_CR_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */ +#endif /* DBGMCU_CR_DBG_CAN2_STOP */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_CR_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ +#if defined(DBGMCU_CR_DBG_TIM8_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_CR_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_CAN1_STOP */ +#if defined(DBGMCU_CR_DBG_TIM9_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_CR_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM9_STOP */ +#if defined(DBGMCU_CR_DBG_TIM10_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_CR_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM10_STOP */ +#if defined(DBGMCU_CR_DBG_TIM11_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_CR_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM11_STOP */ +#if defined(DBGMCU_CR_DBG_TIM15_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_CR_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM15_STOP */ +#if defined(DBGMCU_CR_DBG_TIM16_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_CR_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM16_STOP */ +#if defined(DBGMCU_CR_DBG_TIM17_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_CR_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */ +#endif /* DBGMCU_CR_DBG_TIM17_STOP */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#if defined(FLASH_ACR_LATENCY) +#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +#else +#endif /* FLASH_ACR_LATENCY */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + + + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @note For Low Density devices, the device ID is 0x412 + * @note For Medium Density devices, the device ID is 0x410 + * @note For High Density devices, the device ID is 0x414 + * @note For XL Density devices, the device ID is 0x430 + * @note For Connectivity Line devices, the device ID is 0x418 + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + For example, it is read as revA -> 0x1000,for Low Density devices + For example, it is read as revA -> 0x0000, revB -> 0x2000, revZ -> 0x2001, rev1,2,3,X or Y -> 0x2003,for Medium Density devices + For example, it is read as revA or 1 -> 0x1000, revZ -> 0x1001,rev1,2,3,X or Y -> 0x1003,for Medium Density devices + For example, it is read as revA or 1 -> 0x1003,for XL Density devices + For example, it is read as revA -> 0x1000, revZ -> 0x1001 for Connectivity line devices + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Set Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment + * @param PinAssignment This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); +} + +/** + * @brief Get Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment + * @retval Returned value can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_CR_APB1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_CR_APB1 DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->CR, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_CR_APB1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_CR_APB1 DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->CR, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBGMCU_CR_APB2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->CR, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBGMCU_CR_APB2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_CR_APB2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->CR, Periphs); +} +/** + * @} + */ + +#if defined(FLASH_ACR_LATENCY) +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR PRFTBE LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTBE); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR PRFTBE LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTBE); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR PRFTBS LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTBS) == (FLASH_ACR_PRFTBS)); +} + +#endif /* FLASH_ACR_LATENCY */ +/** + * @brief Enable Flash Half Cycle Access + * @rmtoll FLASH_ACR HLFCYA LL_FLASH_EnableHalfCycleAccess + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableHalfCycleAccess(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_HLFCYA); +} + +/** + * @brief Disable Flash Half Cycle Access + * @rmtoll FLASH_ACR HLFCYA LL_FLASH_DisableHalfCycleAccess + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableHalfCycleAccess(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_HLFCYA); +} + +/** + * @brief Check if Flash Half Cycle Access is enabled or not + * @rmtoll FLASH_ACR HLFCYA LL_FLASH_IsHalfCycleAccessEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsHalfCycleAccessEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_HLFCYA) == (FLASH_ACR_HLFCYA)); +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (DBGMCU) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_SYSTEM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h similarity index 93% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h index 61148e4..8f8346d 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h @@ -1,37 +1,38 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_tim.h + * @file stm32f1xx_ll_tim.h * @author MCD Application Team * @brief Header file of TIM LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_TIM_H -#define __STM32F4xx_LL_TIM_H +#ifndef __STM32F1xx_LL_TIM_H +#define __STM32F1xx_LL_TIM_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) /** @defgroup TIM_LL TIM * @{ @@ -106,12 +107,6 @@ static const uint8_t SHIFT_TAB_OISx[] = */ -/* Remap mask definitions */ -#define TIMx_OR_RMP_SHIFT 16U -#define TIMx_OR_RMP_MASK 0x0000FFFFU -#define TIM2_OR_RMP_MASK (TIM_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT) -#define TIM5_OR_RMP_MASK (TIM_OR_TI4_RMP << TIMx_OR_RMP_SHIFT) -#define TIM11_OR_RMP_MASK (TIM_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) /* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ #define DT_DELAY_1 ((uint8_t)0x7F) @@ -727,7 +722,6 @@ typedef struct */ #define LL_TIM_IC_POLARITY_RISING 0x00000000U /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */ #define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */ -#define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */ /** * @} */ @@ -920,61 +914,6 @@ typedef struct */ -/** @defgroup TIM_LL_EC_TIM2_ITR1_RMP_TIM8 TIM2 Internal Trigger1 Remap TIM8 - * @{ - */ -#define LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO TIM2_OR_RMP_MASK /*!< TIM2_ITR1 is connected to TIM8_TRGO */ -#define LL_TIM_TIM2_ITR1_RMP_ETH_PTP (TIM_OR_ITR1_RMP_0 | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to ETH_PTP */ -#define LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF (TIM_OR_ITR1_RMP_1 | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_FS SOF */ -#define LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF (TIM_OR_ITR1_RMP | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_HS SOF */ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_TIM5_TI4_RMP TIM5 External Input Ch4 Remap - * @{ - */ -#define LL_TIM_TIM5_TI4_RMP_GPIO TIM5_OR_RMP_MASK /*!< TIM5 channel 4 is connected to GPIO */ -#define LL_TIM_TIM5_TI4_RMP_LSI (TIM_OR_TI4_RMP_0 | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to LSI internal clock */ -#define LL_TIM_TIM5_TI4_RMP_LSE (TIM_OR_TI4_RMP_1 | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to LSE */ -#define LL_TIM_TIM5_TI4_RMP_RTC (TIM_OR_TI4_RMP | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to RTC wakeup interrupt */ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_TIM11_TI1_RMP TIM11 External Input Capture 1 Remap - * @{ - */ -#define LL_TIM_TIM11_TI1_RMP_GPIO TIM11_OR_RMP_MASK /*!< TIM11 channel 1 is connected to GPIO */ -#if defined(SPDIFRX) -#define LL_TIM_TIM11_TI1_RMP_SPDIFRX (TIM_OR_TI1_RMP_0 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to SPDIFRX */ - -/* Legacy define */ -#define LL_TIM_TIM11_TI1_RMP_GPIO1 LL_TIM_TIM11_TI1_RMP_SPDIFRX /*!< Legacy define for LL_TIM_TIM11_TI1_RMP_SPDIFRX */ - -#else -#define LL_TIM_TIM11_TI1_RMP_GPIO1 (TIM_OR_TI1_RMP_0 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to GPIO */ -#endif /* SPDIFRX */ -#define LL_TIM_TIM11_TI1_RMP_GPIO2 (TIM_OR_TI1_RMP | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to GPIO */ -#define LL_TIM_TIM11_TI1_RMP_HSE_RTC (TIM_OR_TI1_RMP_1 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to HSE_RTC */ -/** - * @} - */ -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) - -#define LL_TIM_LPTIM_REMAP_MASK 0x10000000U - -#define LL_TIM_TIM9_ITR1_RMP_TIM3_TRGO LL_TIM_LPTIM_REMAP_MASK /*!< TIM9_ITR1 is connected to TIM3 TRGO */ -#define LL_TIM_TIM9_ITR1_RMP_LPTIM (LL_TIM_LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9_ITR1 is connected to LPTIM1 output */ - -#define LL_TIM_TIM5_ITR1_RMP_TIM3_TRGO LL_TIM_LPTIM_REMAP_MASK /*!< TIM5_ITR1 is connected to TIM3 TRGO */ -#define LL_TIM_TIM5_ITR1_RMP_LPTIM (LL_TIM_LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5_ITR1 is connected to LPTIM1 output */ - -#define LL_TIM_TIM1_ITR2_RMP_TIM3_TRGO LL_TIM_LPTIM_REMAP_MASK /*!< TIM1_ITR2 is connected to TIM3 TRGO */ -#define LL_TIM_TIM1_ITR2_RMP_LPTIM (LL_TIM_LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1_ITR2 is connected to LPTIM1 output */ - -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ - /** * @} */ @@ -1044,7 +983,7 @@ typedef struct * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) */ #define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ - (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)(((__TIMCLK__)/(__CNTCLK__)) - 1U) : 0U) /** * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. @@ -1367,11 +1306,9 @@ __STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) /** * @brief Set the counter value. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @rmtoll CNT CNT LL_TIM_SetCounter * @param TIMx Timer instance - * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF) * @retval None */ __STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) @@ -1381,11 +1318,9 @@ __STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) /** * @brief Get the counter value. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @rmtoll CNT CNT LL_TIM_GetCounter * @param TIMx Timer instance - * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF) */ __STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) { @@ -1435,8 +1370,6 @@ __STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) /** * @brief Set the auto-reload value. * @note The counter is blocked while the auto-reload value is null. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter * @rmtoll ARR ARR LL_TIM_SetAutoReload * @param TIMx Timer instance @@ -1451,8 +1384,6 @@ __STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload /** * @brief Get the auto-reload value. * @rmtoll ARR ARR LL_TIM_GetAutoReload - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @param TIMx Timer instance * @retval Auto-reload value */ @@ -2104,9 +2035,6 @@ __STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) /** * @brief Set compare value for output channel 1 (TIMx_CCR1). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not * output channel 1 is supported by a timer instance. * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 @@ -2121,9 +2049,6 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 2 (TIMx_CCR2). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not * output channel 2 is supported by a timer instance. * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 @@ -2138,9 +2063,6 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 3 (TIMx_CCR3). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not * output channel is supported by a timer instance. * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 @@ -2155,9 +2077,6 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 4 (TIMx_CCR4). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not * output channel 4 is supported by a timer instance. * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 @@ -2172,9 +2091,6 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Get compare value (TIMx_CCR1) set for output channel 1. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not * output channel 1 is supported by a timer instance. * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 @@ -2188,9 +2104,6 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR2) set for output channel 2. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not * output channel 2 is supported by a timer instance. * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 @@ -2204,9 +2117,6 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR3) set for output channel 3. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not * output channel 3 is supported by a timer instance. * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 @@ -2220,9 +2130,6 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR4) set for output channel 4. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not * output channel 4 is supported by a timer instance. * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 @@ -2262,7 +2169,6 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) * CCER CC3P LL_TIM_IC_Config\n * CCER CC3NP LL_TIM_IC_Config\n * CCER CC4P LL_TIM_IC_Config\n - * CCER CC4NP LL_TIM_IC_Config * @param TIMx Timer instance * @param Channel This parameter can be one of the following values: * @arg @ref LL_TIM_CHANNEL_CH1 @@ -2273,7 +2179,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 - * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING * @retval None */ __STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) @@ -2471,7 +2377,6 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel * CCER CC3P LL_TIM_IC_SetPolarity\n * CCER CC3NP LL_TIM_IC_SetPolarity\n * CCER CC4P LL_TIM_IC_SetPolarity\n - * CCER CC4NP LL_TIM_IC_SetPolarity * @param TIMx Timer instance * @param Channel This parameter can be one of the following values: * @arg @ref LL_TIM_CHANNEL_CH1 @@ -2481,7 +2386,6 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel * @param ICPolarity This parameter can be one of the following values: * @arg @ref LL_TIM_IC_POLARITY_RISING * @arg @ref LL_TIM_IC_POLARITY_FALLING - * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE * @retval None */ __STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) @@ -2500,7 +2404,6 @@ __STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, * CCER CC3P LL_TIM_IC_GetPolarity\n * CCER CC3NP LL_TIM_IC_GetPolarity\n * CCER CC4P LL_TIM_IC_GetPolarity\n - * CCER CC4NP LL_TIM_IC_GetPolarity * @param TIMx Timer instance * @param Channel This parameter can be one of the following values: * @arg @ref LL_TIM_CHANNEL_CH1 @@ -2510,7 +2413,6 @@ __STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, * @retval Returned value can be one of the following values: * @arg @ref LL_TIM_IC_POLARITY_RISING * @arg @ref LL_TIM_IC_POLARITY_FALLING - * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE */ __STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) { @@ -2560,9 +2462,6 @@ __STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 1. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not * input channel 1 is supported by a timer instance. * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 @@ -2576,9 +2475,6 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 2. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not * input channel 2 is supported by a timer instance. * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 @@ -2592,9 +2488,6 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 3. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not * input channel 3 is supported by a timer instance. * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 @@ -2608,9 +2501,6 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 4. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not * input channel 4 is supported by a timer instance. * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 @@ -3085,86 +2975,6 @@ __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstB * @} */ -/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping - * @{ - */ -/** - * @brief Remap TIM inputs (input channel, internal/external triggers). - * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not - * a some timer inputs can be remapped. - * @rmtoll TIM1_OR ITR2_RMP LL_TIM_SetRemap\n - * TIM2_OR ITR1_RMP LL_TIM_SetRemap\n - * TIM5_OR ITR1_RMP LL_TIM_SetRemap\n - * TIM5_OR TI4_RMP LL_TIM_SetRemap\n - * TIM9_OR ITR1_RMP LL_TIM_SetRemap\n - * TIM11_OR TI1_RMP LL_TIM_SetRemap\n - * LPTIM1_OR OR LL_TIM_SetRemap - * @param TIMx Timer instance - * @param Remap Remap param depends on the TIMx. Description available only - * in CHM version of the User Manual (not in .pdf). - * Otherwise see Reference Manual description of OR registers. - * - * Below description summarizes "Timer Instance" and "Remap" param combinations: - * - * TIM1: one of the following values - * - * ITR2_RMP can be one of the following values - * @arg @ref LL_TIM_TIM1_ITR2_RMP_TIM3_TRGO (*) - * @arg @ref LL_TIM_TIM1_ITR2_RMP_LPTIM (*) - * - * TIM2: one of the following values - * - * ITR1_RMP can be one of the following values - * @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO - * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF - * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF - * - * TIM5: one of the following values - * - * @arg @ref LL_TIM_TIM5_TI4_RMP_GPIO - * @arg @ref LL_TIM_TIM5_TI4_RMP_LSI - * @arg @ref LL_TIM_TIM5_TI4_RMP_LSE - * @arg @ref LL_TIM_TIM5_TI4_RMP_RTC - * @arg @ref LL_TIM_TIM5_ITR1_RMP_TIM3_TRGO (*) - * @arg @ref LL_TIM_TIM5_ITR1_RMP_LPTIM (*) - * - * TIM9: one of the following values - * - * ITR1_RMP can be one of the following values - * @arg @ref LL_TIM_TIM9_ITR1_RMP_TIM3_TRGO (*) - * @arg @ref LL_TIM_TIM9_ITR1_RMP_LPTIM (*) - * - * TIM11: one of the following values - * - * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO - * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO1 (*) - * @arg @ref LL_TIM_TIM11_TI1_RMP_HSE_RTC - * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO2 - * @arg @ref LL_TIM_TIM11_TI1_RMP_SPDIFRX (*) - * - * (*) Value not defined in all devices. \n - * - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) -{ -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) - if ((Remap & LL_TIM_LPTIM_REMAP_MASK) == LL_TIM_LPTIM_REMAP_MASK) - { - /* Connect TIMx internal trigger to LPTIM1 output */ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN); - MODIFY_REG(LPTIM1->OR, - (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), - Remap & ~(LL_TIM_LPTIM_REMAP_MASK)); - } - else - { - MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); - } -#else - MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ -} /** * @} @@ -3716,7 +3526,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx) * @} */ -/** @defgroup TIM_LL_EF_DMA_Management DMA Management +/** @defgroup TIM_LL_EF_DMA_Management DMA-Management * @{ */ /** @@ -4080,7 +3890,7 @@ ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDT * @} */ -#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 */ +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 || TIM15 || TIM16 || TIM17 */ /** * @} @@ -4090,4 +3900,5 @@ ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDT } #endif -#endif /* __STM32F4xx_LL_TIM_H */ +#endif /* __STM32F1xx_LL_TIM_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h similarity index 95% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h index e07c232..9993b17 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h @@ -1,37 +1,38 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_usart.h + * @file stm32f1xx_ll_usart.h * @author MCD Application Team * @brief Header file of USART LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_USART_H -#define __STM32F4xx_LL_USART_H +#ifndef __STM32F1xx_LL_USART_H +#define __STM32F1xx_LL_USART_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART6) || defined (UART4) || defined (UART5) || defined (UART7) || defined (UART8) || defined (UART9) || defined (UART10) +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) /** @defgroup USART_LL USART * @{ @@ -228,7 +229,9 @@ typedef struct * @{ */ #define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#if defined(USART_CR1_OVER8) #define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +#endif /* USART_OverSampling_Feature */ /** * @} */ @@ -356,14 +359,13 @@ typedef struct * @param __BAUDRATE__ Baud rate value to achieve * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case */ -#define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) ((uint32_t)((((uint64_t)(__PERIPHCLK__))*25)/(2*((uint64_t)(__BAUDRATE__))))) +#define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(2*(__BAUDRATE__))) #define __LL_USART_DIVMANT_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__))/100) -#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8)\ - + 50) / 100) +#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8 + 50) / 100) /* UART BRR = mantissa + overflow + fraction = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ #define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ - ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ + ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ (__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0x07)) /** @@ -373,14 +375,13 @@ typedef struct * @param __BAUDRATE__ Baud rate value to achieve * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case */ -#define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) ((uint32_t)((((uint64_t)(__PERIPHCLK__))*25)/(4*((uint64_t)(__BAUDRATE__))))) +#define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(4*(__BAUDRATE__))) #define __LL_USART_DIVMANT_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__))/100) -#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16)\ - + 50) / 100) +#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16) + 50) / 100) /* USART BRR = mantissa + overflow + fraction = (USART DIVMANT << 4) + (USART DIVFRAQ & 0xF0) + (USART DIVFRAQ & 0x0F) */ #define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ - (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0x0F)) /** @@ -445,7 +446,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); + SET_BIT(USARTx->CR1, USART_CR1_RE); } /** @@ -456,7 +457,7 @@ __STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); + CLEAR_BIT(USARTx->CR1, USART_CR1_RE); } /** @@ -467,7 +468,7 @@ __STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); + SET_BIT(USARTx->CR1, USART_CR1_TE); } /** @@ -478,7 +479,7 @@ __STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); + CLEAR_BIT(USARTx->CR1, USART_CR1_TE); } /** @@ -496,7 +497,7 @@ __STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) { - ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); + MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); } /** @@ -603,6 +604,7 @@ __STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx) return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); } +#if defined(USART_CR1_OVER8) /** * @brief Set Oversampling to 8-bit or 16-bit mode * @rmtoll CR1 OVER8 LL_USART_SetOverSampling @@ -630,6 +632,7 @@ __STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx) return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); } +#endif /* USART_OverSampling_Feature */ /** * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not @@ -969,6 +972,7 @@ __STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx) return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); } +#if defined(USART_CR3_ONEBIT) /** * @brief Enable One bit sampling method * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp @@ -1001,7 +1005,9 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx) { return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)); } +#endif /* USART_OneBitSampling_Feature */ +#if defined(USART_CR1_OVER8) /** * @brief Configure USART BRR register for achieving expected Baud Rate value. * @note Compute and set USARTDIV value in BRR Register (full BRR content) @@ -1066,6 +1072,47 @@ __STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t Pe } return (brrresult); } +#else +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t BaudRate) +{ + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk) +{ + uint32_t usartdiv = 0x0U; + uint32_t brrresult = 0x0U; + + usartdiv = USARTx->BRR; + + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = PeriphClk / usartdiv; + } + return (brrresult); +} +#endif /* USART_OverSampling_Feature */ /** * @} @@ -2023,7 +2070,7 @@ __STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); + SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); } /** @@ -2034,7 +2081,7 @@ __STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); + SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); } /** @@ -2045,7 +2092,7 @@ __STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); + SET_BIT(USARTx->CR1, USART_CR1_TCIE); } /** @@ -2056,7 +2103,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE); + SET_BIT(USARTx->CR1, USART_CR1_TXEIE); } /** @@ -2067,7 +2114,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); + SET_BIT(USARTx->CR1, USART_CR1_PEIE); } /** @@ -2095,7 +2142,7 @@ __STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); + SET_BIT(USARTx->CR3, USART_CR3_EIE); } /** @@ -2108,7 +2155,7 @@ __STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); + SET_BIT(USARTx->CR3, USART_CR3_CTSIE); } /** @@ -2119,7 +2166,7 @@ __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); + CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); } /** @@ -2130,7 +2177,7 @@ __STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); + CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); } /** @@ -2141,7 +2188,7 @@ __STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); + CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); } /** @@ -2152,7 +2199,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); + CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); } /** @@ -2163,7 +2210,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); + CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); } /** @@ -2191,7 +2238,7 @@ __STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); + CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); } /** @@ -2204,7 +2251,7 @@ __STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); } /** @@ -2315,7 +2362,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); + SET_BIT(USARTx->CR3, USART_CR3_DMAR); } /** @@ -2326,7 +2373,7 @@ __STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); } /** @@ -2348,7 +2395,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) { - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); + SET_BIT(USARTx->CR3, USART_CR3_DMAT); } /** @@ -2359,7 +2406,7 @@ __STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) { - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); } /** @@ -2383,7 +2430,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx) __STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx) { /* return address of DR register */ - return ((uint32_t) &(USARTx->DR)); + return ((uint32_t) & (USARTx->DR)); } /** @@ -2507,7 +2554,7 @@ void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitS * @} */ -#endif /* USART1 || USART2 || USART3 || USART6 || UART4 || UART5 || UART7 || UART8 || UART9 || UART10 */ +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ /** * @} @@ -2517,5 +2564,6 @@ void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitS } #endif -#endif /* __STM32F4xx_LL_USART_H */ +#endif /* __STM32F1xx_LL_USART_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h similarity index 68% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h index a7114cd..0f991cc 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h @@ -1,34 +1,35 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_usb.h + * @file stm32f1xx_ll_usb.h * @author MCD Application Team * @brief Header file of USB Low Layer HAL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_USB_H -#define STM32F4xx_LL_USB_H +#ifndef STM32F1xx_LL_USB_H +#define STM32F1xx_LL_USB_H #ifdef __cplusplus extern "C" { -#endif /* __cplusplus */ +#endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" +#include "stm32f1xx_hal_def.h" -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver +#if defined (USB) || defined (USB_OTG_FS) +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -41,14 +42,14 @@ extern "C" { /** * @brief USB Mode definition */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) typedef enum { USB_DEVICE_MODE = 0, USB_HOST_MODE = 1, USB_DRD_MODE = 2 -} USB_OTG_ModeTypeDef; +} USB_ModeTypeDef; /** * @brief URB States definition @@ -79,7 +80,6 @@ typedef enum HC_DATATGLERR } USB_OTG_HCStateTypeDef; - /** * @brief USB Instance Initialization Structure definition */ @@ -131,9 +131,6 @@ typedef struct uint8_t is_stall; /*!< Endpoint stall condition This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - uint8_t is_iso_incomplete; /*!< Endpoint isoc condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - uint8_t type; /*!< Endpoint type This parameter can be any value of @ref USB_LL_EP_Type */ @@ -155,8 +152,6 @@ typedef struct uint32_t xfer_len; /*!< Current transfer length */ - uint32_t xfer_size; /*!< requested transfer size */ - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ } USB_OTG_EPTypeDef; @@ -193,7 +188,7 @@ typedef struct uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - uint32_t XferSize; /*!< OTG Channel transfer size. */ + uint32_t XferSize; /*!< OTG Channel transfer size. */ uint32_t xfer_len; /*!< Current transfer length. */ @@ -215,8 +210,90 @@ typedef struct USB_OTG_HCStateTypeDef state; /*!< Host Channel state. This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ } USB_OTG_HCTypeDef; -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) + +typedef enum +{ + USB_DEVICE_MODE = 0 +} USB_ModeTypeDef; + +/** + * @brief USB Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref PCD_Speed/HCD_Speed + (HCD_SPEED_xxx, HCD_SPEED_xxx) */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ + + uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ +} USB_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral + This parameter is added to ensure compatibility across USB peripherals */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ + + uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ + +} USB_EPTypeDef; +#endif /* defined (USB) */ /* Exported constants --------------------------------------------------------*/ @@ -224,7 +301,7 @@ typedef struct * @{ */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) /** @defgroup USB_OTG_CORE VERSION ID * @{ */ @@ -247,9 +324,6 @@ typedef struct /** @defgroup USB_LL Device Speed * @{ */ -#define USBD_HS_SPEED 0U -#define USBD_HSINFS_SPEED 1U -#define USBH_HS_SPEED 0U #define USBD_FS_SPEED 2U #define USBH_FSLS_SPEED 1U /** @@ -259,8 +333,6 @@ typedef struct /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed * @{ */ -#define USB_OTG_SPEED_HIGH 0U -#define USB_OTG_SPEED_HIGH_IN_FULL 1U #define USB_OTG_SPEED_FULL 3U /** * @} @@ -278,9 +350,6 @@ typedef struct /** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value * @{ */ -#ifndef USBD_HS_TRDT_VALUE -#define USBD_HS_TRDT_VALUE 9U -#endif /* USBD_HS_TRDT_VALUE */ #ifndef USBD_FS_TRDT_VALUE #define USBD_FS_TRDT_VALUE 5U #define USBD_DEFAULT_TRDT_VALUE 9U @@ -292,7 +361,6 @@ typedef struct /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS * @{ */ -#define USB_OTG_HS_MAX_PACKET_SIZE 512U #define USB_OTG_FS_MAX_PACKET_SIZE 64U #define USB_OTG_MAX_EP0_SIZE 64U /** @@ -323,10 +391,10 @@ typedef struct /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS * @{ */ -#define EP_MPS_64 0U -#define EP_MPS_32 1U -#define EP_MPS_16 2U -#define EP_MPS_8 3U +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U /** * @} */ @@ -400,12 +468,6 @@ typedef struct #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U #define GRXSTS_PKTSTS_CH_HALTED 7U -#define TEST_J 1U -#define TEST_K 2U -#define TEST_SE0_NAK 3U -#define TEST_PACKET 4U -#define TEST_FORCE_EN 5U - #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) @@ -423,13 +485,49 @@ typedef struct + USB_OTG_HOST_CHANNEL_BASE\ + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +/** + * @} + */ + +#define BTABLE_ADDRESS 0x000U +#define PMA_ACCESS 2U +#endif /* defined (USB) */ +#if defined (USB_OTG_FS) #define EP_ADDR_MSK 0xFU - -#ifndef USE_USB_DOUBLE_BUFFER -#define USE_USB_DOUBLE_BUFFER 1U -#endif /* USE_USB_DOUBLE_BUFFER */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +#define EP_ADDR_MSK 0x7U +#endif /* defined (USB) */ /** * @} */ @@ -438,13 +536,13 @@ typedef struct /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros * @{ */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ /** * @} */ @@ -453,13 +551,13 @@ typedef struct /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions * @{ */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode); HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); @@ -467,21 +565,20 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTy HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, - uint8_t ch_ep_num, uint16_t len, uint8_t dma); + uint8_t ch_ep_num, uint16_t len); void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); @@ -501,7 +598,7 @@ HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, uint8_t epnum, uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps); HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, - USB_OTG_HCTypeDef *hc, uint8_t dma); + USB_OTG_HCTypeDef *hc); uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); @@ -509,8 +606,51 @@ HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num); + +#if defined (HAL_PCD_MODULE_ENABLED) +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); +#endif + +HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); +HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len); + +void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); + +uint32_t USB_ReadInterrupts(USB_TypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); + +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); +#endif /* defined (USB) */ /** * @} */ @@ -526,11 +666,13 @@ HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); /** * @} */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ #ifdef __cplusplus } -#endif /* __cplusplus */ +#endif -#endif /* STM32F4xx_LL_USB_H */ +#endif /* STM32F1xx_LL_USB_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h similarity index 65% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h index 2b254a1..681ef89 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_utils.h + * @file stm32f1xx_ll_utils.h * @author MCD Application Team * @brief Header file of UTILS LL module. @verbatim @@ -18,28 +18,29 @@ ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_UTILS_H -#define __STM32F4xx_LL_UTILS_H +#ifndef __STM32F1xx_LL_UTILS_H +#define __STM32F1xx_LL_UTILS_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -68,11 +69,6 @@ extern "C" { */ #define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE -/** - * @brief Package data register base address - */ -#define PACKAGE_BASE_ADDRESS PACKAGE_BASE - /** * @} */ @@ -93,24 +89,17 @@ extern "C" { */ typedef struct { - uint32_t PLLM; /*!< Division factor for PLL VCO input clock. - This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV + uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLL_MUL - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ - uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = @ref RCC_PLLN_MIN_VALUE - and Max_Data = @ref RCC_PLLN_MIN_VALUE + uint32_t Prediv; /*!< Division factor for HSE used as PLL clock source. + This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ - - uint32_t PLLP; /*!< Division for the main system clock. - This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ } LL_UTILS_PLLInitTypeDef; /** @@ -156,20 +145,6 @@ typedef struct * @} */ -/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE - * @{ - */ -#define LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 0x00000000U /*!< WLCSP36 or UFQFPN48 or LQFP64 package type */ -#define LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 0x00000100U /*!< WLCSP168 or FBGA169 or LQFP100 or LQFP64 or UFQFPN48 package type */ -#define LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 0x00000200U /*!< WLCSP64 or WLCSP81 or LQFP176 or UFBGA176 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 0x00000300U /*!< LQFP144 or UFBGA144 or UFBGA144 or UFBGA100 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 0x00000400U /*!< LQFP100 or LQFP208 or TFBGA216 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 0x00000500U /*!< LQFP208 or TFBGA216 package type */ -#define LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 0x00000700U /*!< TQFP64 or UFBGA144 or LQFP144 package type */ -/** - * @} - */ - /** * @} */ @@ -220,26 +195,9 @@ __STATIC_INLINE uint32_t LL_GetUID_Word2(void) */ __STATIC_INLINE uint32_t LL_GetFlashSize(void) { - return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF); + return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS))); } -/** - * @brief Get Package type - * @retval Returned value can be one of the following values: - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_GetPackageType(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U); -} /** * @} @@ -278,12 +236,17 @@ void LL_mDelay(uint32_t Delay); */ void LL_SetSystemCoreClock(uint32_t HCLKFrequency); -ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); +#if defined(FLASH_ACR_LATENCY) +ErrorStatus LL_SetFlashLatency(uint32_t Frequency); +#endif /* FLASH_ACR_LATENCY */ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); - +#if defined(RCC_PLL2_SUPPORT) +ErrorStatus LL_PLL_ConfigSystemClock_PLL2(uint32_t HSEFrequency, uint32_t HSEBypass, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_PLLInitTypeDef *UTILS_PLL2InitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +#endif /* RCC_PLL2_SUPPORT */ /** * @} */ @@ -304,4 +267,6 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypa } #endif -#endif /* __STM32F4xx_LL_UTILS_H */ +#endif /* __STM32F1xx_LL_UTILS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_wwdg.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_wwdg.h similarity index 93% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_wwdg.h rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_wwdg.h index 5cbca0d..c4ddbd4 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_wwdg.h +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_wwdg.h @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_wwdg.h + * @file stm32f1xx_ll_wwdg.h * @author MCD Application Team * @brief Header file of WWDG LL module. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_WWDG_H -#define STM32F4xx_LL_WWDG_H +#ifndef STM32F1xx_LL_WWDG_H +#define STM32F1xx_LL_WWDG_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" +#include "stm32f1xx.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -313,4 +314,6 @@ __STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx) } #endif -#endif /* STM32F4xx_LL_WWDG_H */ +#endif /* STM32F1xx_LL_WWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c similarity index 61% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c index 9bf8742..2538827 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c @@ -1,41 +1,41 @@ /** ****************************************************************************** - * @file stm32f4xx_hal.c + * @file stm32f1xx_hal.c * @author MCD Application Team * @brief HAL module driver. * This is the common part of the HAL initialization * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] The common HAL driver contains a set of generic and common APIs that can be - used by the PPP peripheral drivers and the user to start using the HAL. + used by the PPP peripheral drivers and the user to start using the HAL. [..] - The HAL contains two APIs' categories: + The HAL contains two APIs' categories: (+) Common HAL APIs (+) Services HAL APIs @endverbatim ****************************************************************************** - */ + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -44,51 +44,36 @@ * @{ */ +#ifdef HAL_MODULE_ENABLED + /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ -/** @addtogroup HAL_Private_Constants + +/** @defgroup HAL_Private_Constants HAL Private Constants * @{ */ /** - * @brief STM32F4xx HAL Driver version number V1.8.1 - */ -#define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define __STM32F4xx_HAL_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */ -#define __STM32F4xx_HAL_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */ -#define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ -#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\ - |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\ - |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\ - |(__STM32F4xx_HAL_VERSION_RC)) - + * @brief STM32F1xx HAL Driver version number V1.1.8 + */ +#define __STM32F1xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32F1xx_HAL_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */ +#define __STM32F1xx_HAL_VERSION_SUB2 (0x08U) /*!< [15:8] sub2 version */ +#define __STM32F1xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32F1xx_HAL_VERSION ((__STM32F1xx_HAL_VERSION_MAIN << 24)\ + |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32F1xx_HAL_VERSION_RC)) + #define IDCODE_DEVID_MASK 0x00000FFFU -/* ------------ RCC registers bit address in the alias region ----------- */ -#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) -/* --- MEMRMP Register ---*/ -/* Alias word address of UFB_MODE bit */ -#define MEMRMP_OFFSET SYSCFG_OFFSET -#define UFB_MODE_BIT_NUMBER SYSCFG_MEMRMP_UFB_MODE_Pos -#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U)) - -/* --- CMPCR Register ---*/ -/* Alias word address of CMP_PD bit */ -#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U) -#define CMP_PD_BIT_NUMBER SYSCFG_CMPCR_CMP_PD_Pos -#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U)) - -/* --- MCHDLYCR Register ---*/ -/* Alias word address of BSCKSEL bit */ -#define MCHDLYCR_OFFSET (SYSCFG_OFFSET + 0x30U) -#define BSCKSEL_BIT_NUMBER SYSCFG_MCHDLYCR_BSCKSEL_Pos -#define MCHDLYCR_BSCKSEL_BB (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U)) /** * @} */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ -/** @addtogroup HAL_Private_Variables + +/** @defgroup HAL_Private_Variables HAL Private Variables * @{ */ __IO uint32_t uwTick; @@ -98,57 +83,57 @@ HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ * @} */ /* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ /** @defgroup HAL_Exported_Functions HAL Exported Functions * @{ */ -/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions * @brief Initialization and de-initialization functions * -@verbatim +@verbatim =============================================================================== - ##### Initialization and Configuration functions ##### + ##### Initialization and de-initialization functions ##### =============================================================================== - [..] This section provides functions allowing to: - (+) Initializes the Flash interface the NVIC allocation and initial clock - configuration. It initializes the systick also when timeout is needed + [..] This section provides functions allowing to: + (+) Initializes the Flash interface, the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed and the backup domain when enabled. - (+) De-Initializes common part of the HAL. - (+) Configure the time base source to have 1ms time base with a dedicated - Tick interrupt priority. + (+) de-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. (++) SysTick timer is used by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and handled in milliseconds basis. - (++) Time base configuration function (HAL_InitTick ()) is called automatically - at the beginning of the program after reset by HAL_Init() or at any time - when clock is configured, by HAL_RCC_ClockConfig(). - (++) Source of time base is configured to generate interrupts at regular - time intervals. Care must be taken if HAL_Delay() is called from a - peripheral ISR process, the Tick interrupt line must have higher priority - (numerically lower) than the peripheral interrupt. Otherwise the caller - ISR process will be blocked. - (++) functions affecting time base configurations are declared as __weak + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak to make override possible in case of other implementations in user file. @endverbatim * @{ */ /** - * @brief This function is used to initialize the HAL Library; it must be the first + * @brief This function is used to initialize the HAL Library; it must be the first * instruction to be executed in the main program (before to call any other * HAL function), it performs the following: - * Configure the Flash prefetch, instruction and Data caches. + * Configure the Flash prefetch. * Configures the SysTick to generate an interrupt each 1 millisecond, * which is clocked by the HSI (at this stage, the clock is not yet * configured and thus the system is running from the internal HSI at 16 MHz). * Set NVIC Group Priority to 4. - * Calls the HAL_MspInit() callback function defined in user file - * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization - * + * Calls the HAL_MspInit() callback function defined in user file + * "stm32f1xx_hal_msp.c" to do the global low level hardware initialization + * * @note SysTick is used as time base for the HAL_Delay() function, the application * need to ensure that the SysTick time base is always set to 1 millisecond * to have correct HAL operation. @@ -156,17 +141,16 @@ HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ */ HAL_StatusTypeDef HAL_Init(void) { - /* Configure Flash prefetch, Instruction cache, Data cache */ -#if (INSTRUCTION_CACHE_ENABLE != 0U) - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); -#endif /* INSTRUCTION_CACHE_ENABLE */ + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) +#if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \ + defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) -#if (DATA_CACHE_ENABLE != 0U) - __HAL_FLASH_DATA_CACHE_ENABLE(); -#endif /* DATA_CACHE_ENABLE */ - -#if (PREFETCH_ENABLE != 0U) + /* Prefetch buffer is not available on value line devices */ __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif #endif /* PREFETCH_ENABLE */ /* Set Interrupt Group Priority */ @@ -183,8 +167,9 @@ HAL_StatusTypeDef HAL_Init(void) } /** - * @brief This function de-Initializes common part of the HAL and stops the systick. - * This function is optional. + * @brief This function de-Initializes common part of the HAL and stops the systick. + * of time base. + * @note This function is optional. * @retval HAL status */ HAL_StatusTypeDef HAL_DeInit(void) @@ -196,18 +181,14 @@ HAL_StatusTypeDef HAL_DeInit(void) __HAL_RCC_APB2_FORCE_RESET(); __HAL_RCC_APB2_RELEASE_RESET(); - __HAL_RCC_AHB1_FORCE_RESET(); - __HAL_RCC_AHB1_RELEASE_RESET(); - - __HAL_RCC_AHB2_FORCE_RESET(); - __HAL_RCC_AHB2_RELEASE_RESET(); - - __HAL_RCC_AHB3_FORCE_RESET(); - __HAL_RCC_AHB3_RELEASE_RESET(); +#if defined(STM32F105xC) || defined(STM32F107xC) + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); +#endif /* De-Init the low level hardware */ HAL_MspDeInit(); - + /* Return function status */ return HAL_OK; } @@ -222,27 +203,27 @@ HAL_StatusTypeDef HAL_DeInit(void) // the HAL_MspInit could be implemented in the user file // */ //} - -/** - * @brief DeInitializes the MSP. - * @retval None - */ +// +///** +// * @brief DeInitializes the MSP. +// * @retval None +// */ __weak void HAL_MspDeInit(void) { /* NOTE : This function should not be modified, when the callback is needed, the HAL_MspDeInit could be implemented in the user file - */ + */ } /** * @brief This function configures the source of the time base. - * The time source is configured to have 1ms time base with a dedicated + * The time source is configured to have 1ms time base with a dedicated * Tick interrupt priority. * @note This function is called automatically at the beginning of program after * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). - * @note In the default implementation, SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals. - * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, * The SysTick interrupt must have higher priority (numerically lower) * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. * The function is declared as __weak to be overwritten in case of other @@ -277,9 +258,9 @@ __weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) * @} */ -/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions - * @brief HAL Control functions - * +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * @verbatim =============================================================================== ##### HAL Control functions ##### @@ -305,7 +286,7 @@ __weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) * used as application time base. * @note In the default implementation, this variable is incremented each 1ms * in SysTick ISR. - * @note This function is declared as __weak to be overwritten in case of other + * @note This function is declared as __weak to be overwritten in case of other * implementations in user file. * @retval None */ @@ -316,7 +297,7 @@ __weak void HAL_IncTick(void) /** * @brief Provides a tick value in millisecond. - * @note This function is declared as __weak to be overwritten in case of other + * @note This function is declared as __weak to be overwritten in case of other * implementations in user file. * @retval tick value */ @@ -336,7 +317,7 @@ uint32_t HAL_GetTickPrio(void) /** * @brief Set new tick Freq. - * @retval Status + * @retval status */ HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) { @@ -376,7 +357,7 @@ HAL_TickFreqTypeDef HAL_GetTickFreq(void) } /** - * @brief This function provides minimum delay (in milliseconds) based + * @brief This function provides minimum delay (in milliseconds) based * on variable incremented. * @note In the default implementation , SysTick timer is the source of time base. * It is used to generate interrupts at regular time intervals where uwTick @@ -388,25 +369,25 @@ HAL_TickFreqTypeDef HAL_GetTickFreq(void) */ __weak void HAL_Delay(uint32_t Delay) { - uint32_t tickstart = HAL_GetTick(); - uint32_t wait = Delay; - - /* Add a freq to guarantee minimum wait */ - if (wait < HAL_MAX_DELAY) - { - wait += (uint32_t)(uwTickFreq); - } - - while((HAL_GetTick() - tickstart) < wait) - { - } + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } } /** * @brief Suspend Tick increment. * @note In the default implementation , SysTick timer is the source of time base. It is * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() - * is called, the SysTick interrupt will be disabled and so Tick increment + * is called, the SysTick interrupt will be disabled and so Tick increment * is suspended. * @note This function is declared as __weak to be overwritten in case of other * implementations in user file. @@ -415,14 +396,14 @@ __weak void HAL_Delay(uint32_t Delay) __weak void HAL_SuspendTick(void) { /* Disable SysTick Interrupt */ - SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); } /** * @brief Resume Tick increment. * @note In the default implementation , SysTick timer is the source of time base. It is * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() - * is called, the SysTick interrupt will be enabled and so Tick increment + * is called, the SysTick interrupt will be enabled and so Tick increment * is resumed. * @note This function is declared as __weak to be overwritten in case of other * implementations in user file. @@ -431,34 +412,75 @@ __weak void HAL_SuspendTick(void) __weak void HAL_ResumeTick(void) { /* Enable SysTick Interrupt */ - SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); } /** * @brief Returns the HAL revision - * @retval version : 0xXYZR (8bits for each decimal, R for RC) + * @retval version 0xXYZR (8bits for each decimal, R for RC) */ uint32_t HAL_GetHalVersion(void) { - return __STM32F4xx_HAL_VERSION; + return __STM32F1xx_HAL_VERSION; } /** - * @brief Returns the device revision identifier. + * @brief Returns the device revision identifier. + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. * @retval Device revision identifier */ uint32_t HAL_GetREVID(void) { - return((DBGMCU->IDCODE) >> 16U); + return ((DBGMCU->IDCODE) >> DBGMCU_IDCODE_REV_ID_Pos); } /** * @brief Returns the device identifier. + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. * @retval Device identifier */ uint32_t HAL_GetDEVID(void) { - return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); + return ((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); } /** @@ -472,6 +494,13 @@ void HAL_DBGMCU_EnableDBGSleepMode(void) /** * @brief Disable the Debug Module during SLEEP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. * @retval None */ void HAL_DBGMCU_DisableDBGSleepMode(void) @@ -481,6 +510,27 @@ void HAL_DBGMCU_DisableDBGSleepMode(void) /** * @brief Enable the Debug Module during STOP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * Note: On all STM32F1 devices: + * If the system tick timer interrupt is enabled during the Stop mode + * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup + * the system from Stop mode. + * Workaround: To debug the Stop mode, disable the system tick timer + * interrupt. + * Refer to errata sheet of these devices for more details. + * Note: On all STM32F1 devices: + * If the system tick timer interrupt is enabled during the Stop mode + * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup + * the system from Stop mode. + * Workaround: To debug the Stop mode, disable the system tick timer + * interrupt. + * Refer to errata sheet of these devices for more details. * @retval None */ void HAL_DBGMCU_EnableDBGStopMode(void) @@ -490,6 +540,13 @@ void HAL_DBGMCU_EnableDBGStopMode(void) /** * @brief Disable the Debug Module during STOP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. * @retval None */ void HAL_DBGMCU_DisableDBGStopMode(void) @@ -499,6 +556,13 @@ void HAL_DBGMCU_DisableDBGStopMode(void) /** * @brief Enable the Debug Module during STANDBY mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. * @retval None */ void HAL_DBGMCU_EnableDBGStandbyMode(void) @@ -508,6 +572,13 @@ void HAL_DBGMCU_EnableDBGStandbyMode(void) /** * @brief Disable the Debug Module during STANDBY mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. * @retval None */ void HAL_DBGMCU_DisableDBGStandbyMode(void) @@ -516,86 +587,14 @@ void HAL_DBGMCU_DisableDBGStandbyMode(void) } /** - * @brief Enables the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None + * @} */ -void HAL_EnableCompensationCell(void) -{ - *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE; -} /** - * @brief Power-down the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None + * @} */ -void HAL_DisableCompensationCell(void) -{ - *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE; -} -/** - * @brief Returns first word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw0(void) -{ - return (READ_REG(*((uint32_t *)UID_BASE))); -} - -/** - * @brief Returns second word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw1(void) -{ - return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); -} - -/** - * @brief Returns third word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw2(void) -{ - return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); -} - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Enables the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. - * - * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_EnableMemorySwappingBank(void) -{ - *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. - * - * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_DisableMemorySwappingBank(void) -{ - *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +#endif /* HAL_MODULE_ENABLED */ /** * @} */ @@ -604,12 +603,4 @@ void HAL_DisableMemorySwappingBank(void) * @} */ -/** - * @} - */ - -/** - * @} - */ - - +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c new file mode 100644 index 0000000..62cc847 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c @@ -0,0 +1,2437 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_adc.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) + * peripheral: + * + Initialization and de-initialization functions + * ++ Initialization and Configuration of ADC + * + Operation functions + * ++ Start, stop, get result of conversions of regular + * group, using 3 possible modes: polling, interruption or DMA. + * + Control functions + * ++ Channels configuration on regular group + * ++ Channels configuration on injected group + * ++ Analog Watchdog configuration + * + State functions + * ++ ADC state machine management + * ++ Interrupts and flags management + * Other functions (extended functions) are available in file + * "stm32f1xx_hal_adc_ex.c". + * + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit resolution + + (+) Interrupt generation at the end of regular conversion, end of injected + conversion, and in case of analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (channel wise) + + (+) ADC conversion of regular group and injected group. + + (+) External trigger (timer or EXTI) + for both regular and injected groups. + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) Multimode Dual mode (available on devices with 2 ADCs or more). + + (+) Configurable DMA data storage in Multimode Dual mode (available on devices + with 2 DCs or more). + + (+) Configurable delay between conversions in Dual interleaved mode (available + on devices with 2 DCs or more). + + (+) ADC calibration + + (+) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at + slower speed. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + Caution: On STM32F1, ADC clock frequency max is 14MHz (refer + to device datasheet). + Therefore, ADC clock prescaler must be configured in + function of ADC clock source frequency to remain below + this maximum frequency. + (++) One clock setting is mandatory: + ADC clock (core clock, also possibly conversion clock). + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) RCC_PeriphCLKInitTypeDef PeriphClkInit; + (+++) __ADC1_CLK_ENABLE(); + (+++) PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC; + (+++) PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV2; + (+++) HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, groups regular/injected, channels parameters *** + ========================================================================== + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the injected group parameters (conversion trigger, + sequencer, ..., of injected group) + and the channels for injected group parameters (channel number, + channel rank into sequencer, ..., into injected group) + using function HAL_ADCEx_InjectedConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + (#) Optionally, for devices with several ADC instances: configure the + multimode parameters + using function HAL_ADCEx_MultiModeConfigChannel(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) Optionally, perform an automatic ADC calibration to improve the + conversion accuracy + using function HAL_ADCEx_Calibration_Start(). + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (or for injected group: HAL_ADCEx_InjectedPollForConversion() ) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (or for injected group: HAL_ADCEx_InjectedGetValue() ) + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (or for injected group: HAL_ADCEx_InjectedConvCpltCallback() ) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (or for injected group: HAL_ADCEx_InjectedGetValue() ) + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + (++) For devices with several ADCs: ADC multimode conversion + with transfer by DMA: + (+++) Activate the ADC peripheral (slave) and start conversions + using function HAL_ADC_Start() + (+++) Activate the ADC peripheral (master) and start conversions + using function HAL_ADCEx_MultiModeStart_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral (master) + using function HAL_ADCEx_MultiModeStop_DMA() + (+++) Stop conversion and disable the ADC peripheral (slave) + using function HAL_ADC_Stop_IT() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + (+@) HAL_ADCEx_InjectedConvCpltCallback() + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC + (+++) PeriphClkInit.AdcClockSelection = RCC_ADCPLLCLK2_OFF + (+++) HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_ADC_RegisterCallback() + to register an interrupt callback. + [..] + + Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) InjectedConvCpltCallback : ADC group injected conversion complete callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) InjectedConvCpltCallback : ADC group injected conversion complete callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit() + or @ref HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + + /* Timeout values for ADC enable and disable settling time. */ + /* Values defined to be higher than worst cases: low clocks freq, */ + /* maximum prescaler. */ + /* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ + /* prescaler 4, sampling time 12.5 ADC clock cycles, resolution 12 bits. */ + /* Unit: ms */ + #define ADC_ENABLE_TIMEOUT 2U + #define ADC_DISABLE_TIMEOUT 2U + + /* Delay for ADC stabilization time. */ + /* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */ + /* Unit: us */ + #define ADC_STAB_DELAY_US 1U + + /* Delay for temperature sensor stabilization time. */ + /* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */ + /* Unit: us */ + #define ADC_TEMPSENSOR_DELAY_US 10U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (clock source APB2). + * See commented example code below that can be copied and uncommented + * into HAL_ADC_MspInit(). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_cr1 = 0U; + uint32_t tmp_cr2 = 0U; + uint32_t tmp_sqr1 = 0U; + + /* Check ADC handle */ + if(hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + + if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + if(hadc->Init.DiscontinuousConvMode != DISABLE) + { + assert_param(IS_ADC_REGULAR_DISCONT_NUMBER(hadc->Init.NbrOfDiscConversion)); + } + } + + /* As prerequisite, into HAL_ADC_MspInit(), ADC clock must be configured */ + /* at RCC top level. */ + /* Refer to header of this file for more details on clock enabling */ + /* procedure. */ + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { + /* Initialize ADC error code */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Allocate lock resource and initialize it */ + hadc->Lock = HAL_UNLOCKED; + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + /* Note: In case of ADC already enabled, precaution to not launch an */ + /* unwanted conversion while modifying register CR2 by writing 1 to */ + /* bit ADON. */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed. */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL) && + (tmp_hal_status == HAL_OK) ) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Set ADC parameters */ + + /* Configuration of ADC: */ + /* - data alignment */ + /* - external trigger to start conversion */ + /* - external trigger polarity (always set to 1, because needed for all */ + /* triggers: external trigger of SW start) */ + /* - continuous conversion mode */ + /* Note: External trigger polarity (ADC_CR2_EXTTRIG) is set into */ + /* HAL_ADC_Start_xxx functions because if set in this function, */ + /* a conversion on injected group would start a conversion also on */ + /* regular group after ADC enabling. */ + tmp_cr2 |= (hadc->Init.DataAlign | + ADC_CFGR_EXTSEL(hadc, hadc->Init.ExternalTrigConv) | + ADC_CR2_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) ); + + /* Configuration of ADC: */ + /* - scan mode */ + /* - discontinuous mode disable/enable */ + /* - discontinuous mode number of conversions */ + tmp_cr1 |= (ADC_CR1_SCAN_SET(hadc->Init.ScanConvMode)); + + /* Enable discontinuous mode only if continuous mode is disabled */ + /* Note: If parameter "Init.ScanConvMode" is set to disable, parameter */ + /* discontinuous is set anyway, but will have no effect on ADC HW. */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + /* Set the number of channels to be converted in discontinuous mode */ + SET_BIT(tmp_cr1, ADC_CR1_DISCEN | + ADC_CR1_DISCONTINUOUS_NUM(hadc->Init.NbrOfDiscConversion) ); + } + else + { + /* ADC regular group settings continuous and sequencer discontinuous*/ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Update ADC configuration register CR1 with previous settings */ + MODIFY_REG(hadc->Instance->CR1, + ADC_CR1_SCAN | + ADC_CR1_DISCEN | + ADC_CR1_DISCNUM , + tmp_cr1 ); + + /* Update ADC configuration register CR2 with previous settings */ + MODIFY_REG(hadc->Instance->CR2, + ADC_CR2_ALIGN | + ADC_CR2_EXTSEL | + ADC_CR2_EXTTRIG | + ADC_CR2_CONT , + tmp_cr2 ); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is present by hardware on this device and, if */ + /* disabled, discards automatically nb of conversions. Anyway, nb of */ + /* conversions is forced to 0x00 for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion" */ + if (ADC_CR1_SCAN_SET(hadc->Init.ScanConvMode) == ADC_SCAN_ENABLE) + { + tmp_sqr1 = ADC_SQR1_L_SHIFT(hadc->Init.NbrOfConversion); + } + + MODIFY_REG(hadc->Instance->SQR1, + ADC_SQR1_L , + tmp_sqr1 ); + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core IP clocking. */ + /* Check through register CR2 (excluding bits set in other functions: */ + /* execution control bits (ADON, JSWSTART, SWSTART), regular group bits */ + /* (DMA), injected group bits (JEXTTRIG and JEXTSEL), channel internal */ + /* measurement path bit (TSVREFE). */ + if (READ_BIT(hadc->Instance->CR2, ~(ADC_CR2_ADON | ADC_CR2_DMA | + ADC_CR2_SWSTART | ADC_CR2_JSWSTART | + ADC_CR2_JEXTTRIG | ADC_CR2_JEXTSEL | + ADC_CR2_TSVREFE )) + == tmp_cr2) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * If needed, the example code can be copied and uncommented into + * function HAL_ADC_MspDeInit(). + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check ADC handle */ + if(hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed. */ + if (tmp_hal_status == HAL_OK) + { + /* ========== Reset ADC registers ========== */ + + + + + /* Reset register SR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD | ADC_FLAG_JEOC | ADC_FLAG_EOC | + ADC_FLAG_JSTRT | ADC_FLAG_STRT)); + + /* Reset register CR1 */ + CLEAR_BIT(hadc->Instance->CR1, (ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_DISCNUM | + ADC_CR1_JDISCEN | ADC_CR1_DISCEN | ADC_CR1_JAUTO | + ADC_CR1_AWDSGL | ADC_CR1_SCAN | ADC_CR1_JEOCIE | + ADC_CR1_AWDIE | ADC_CR1_EOCIE | ADC_CR1_AWDCH )); + + /* Reset register CR2 */ + CLEAR_BIT(hadc->Instance->CR2, (ADC_CR2_TSVREFE | ADC_CR2_SWSTART | ADC_CR2_JSWSTART | + ADC_CR2_EXTTRIG | ADC_CR2_EXTSEL | ADC_CR2_JEXTTRIG | + ADC_CR2_JEXTSEL | ADC_CR2_ALIGN | ADC_CR2_DMA | + ADC_CR2_RSTCAL | ADC_CR2_CAL | ADC_CR2_CONT | + ADC_CR2_ADON )); + + /* Reset register SMPR1 */ + CLEAR_BIT(hadc->Instance->SMPR1, (ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16 | ADC_SMPR1_SMP15 | + ADC_SMPR1_SMP14 | ADC_SMPR1_SMP13 | ADC_SMPR1_SMP12 | + ADC_SMPR1_SMP11 | ADC_SMPR1_SMP10 )); + + /* Reset register SMPR2 */ + CLEAR_BIT(hadc->Instance->SMPR2, (ADC_SMPR2_SMP9 | ADC_SMPR2_SMP8 | ADC_SMPR2_SMP7 | + ADC_SMPR2_SMP6 | ADC_SMPR2_SMP5 | ADC_SMPR2_SMP4 | + ADC_SMPR2_SMP3 | ADC_SMPR2_SMP2 | ADC_SMPR2_SMP1 | + ADC_SMPR2_SMP0 )); + + /* Reset register JOFR1 */ + CLEAR_BIT(hadc->Instance->JOFR1, ADC_JOFR1_JOFFSET1); + /* Reset register JOFR2 */ + CLEAR_BIT(hadc->Instance->JOFR2, ADC_JOFR2_JOFFSET2); + /* Reset register JOFR3 */ + CLEAR_BIT(hadc->Instance->JOFR3, ADC_JOFR3_JOFFSET3); + /* Reset register JOFR4 */ + CLEAR_BIT(hadc->Instance->JOFR4, ADC_JOFR4_JOFFSET4); + + /* Reset register HTR */ + CLEAR_BIT(hadc->Instance->HTR, ADC_HTR_HT); + /* Reset register LTR */ + CLEAR_BIT(hadc->Instance->LTR, ADC_LTR_LT); + + /* Reset register SQR1 */ + CLEAR_BIT(hadc->Instance->SQR1, ADC_SQR1_L | + ADC_SQR1_SQ16 | ADC_SQR1_SQ15 | + ADC_SQR1_SQ14 | ADC_SQR1_SQ13 ); + + /* Reset register SQR1 */ + CLEAR_BIT(hadc->Instance->SQR1, ADC_SQR1_L | + ADC_SQR1_SQ16 | ADC_SQR1_SQ15 | + ADC_SQR1_SQ14 | ADC_SQR1_SQ13 ); + + /* Reset register SQR2 */ + CLEAR_BIT(hadc->Instance->SQR2, ADC_SQR2_SQ12 | ADC_SQR2_SQ11 | ADC_SQR2_SQ10 | + ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7 ); + + /* Reset register SQR3 */ + CLEAR_BIT(hadc->Instance->SQR3, ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4 | + ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1 ); + + /* Reset register JSQR */ + CLEAR_BIT(hadc->Instance->JSQR, ADC_JSQR_JL | + ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 | + ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 ); + + /* Reset register JSQR */ + CLEAR_BIT(hadc->Instance->JSQR, ADC_JSQR_JL | + ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 | + ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 ); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable*/ + + /* Reset registers JDR1, JDR2, JDR3, JDR4 */ + /* bits in access mode read only, no direct reset applicable*/ + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripheral: ADC state is */ + /* forced to a similar state after device power-on. */ + /* If needed, copy-paste and uncomment the following reset code into */ + /* function "void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)": */ + /* */ + /* __HAL_RCC_ADC1_FORCE_RESET() */ + /* __HAL_RCC_ADC1_RELEASE_RESET() */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initializes the ADC MSP. + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the ADC MSP. + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID ADC group injected conversion complete callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : + hadc->InjectedConvCpltCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID ADC group injected conversion complete callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : + hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 IO operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enables ADC, starts conversion of regular group. + * Interruptions enabled in this function: None. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC, + HAL_ADC_STATE_REG_BUSY); + + /* Set group injected state (from auto-injection) and multimode state */ + /* for all cases of multimode: independent mode, multimode ADC master */ + /* or multimode ADC slave (for devices with several ADCs): */ + if (ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc)) + { + /* Set ADC state (ADC independent or master) */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + } + else + { + /* Set ADC state (ADC slave) */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (ADC_MULTIMODE_AUTO_INJECTED(hadc)) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* State machine update: Check if an injected conversion is ongoing */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to conversions on group regular */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear regular group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Case of multimode enabled: */ + /* - if ADC is slave, ADC is enabled only (conversion is not started). */ + /* - if ADC is master, ADC is enabled and conversion is started. */ + /* If ADC is master, ADC is enabled and conversion is started. */ + /* Note: Alternate trigger for single conversion could be to force an */ + /* additional set of bit ADON "hadc->Instance->CR2 |= ADC_CR2_ADON;"*/ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc) && + ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc) ) + { + /* Start ADC conversion on regular group with SW start */ + SET_BIT(hadc->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTTRIG)); + } + else + { + /* Start ADC conversion on regular group with external trigger */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_EXTTRIG); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode. + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. + * @note On STM32F1 devices, limitation in case of sequencer enabled + * (several ranks selected): polling cannot be done on each + * conversion inside the sequence. In this case, polling is replaced by + * wait for maximum conversion time. + * @param hadc: ADC handle + * @param Timeout: Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Variables for polling in case of scan mode enabled and polling for each */ + /* conversion. */ + __IO uint32_t Conversion_Timeout_CPU_cycles = 0U; + uint32_t Conversion_Timeout_CPU_cycles_max = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode */ + if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA)) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Polling for end of conversion: differentiation if single/sequence */ + /* conversion. */ + /* - If single conversion for regular group (Scan mode disabled or enabled */ + /* with NbrOfConversion =1), flag EOC is used to determine the */ + /* conversion completion. */ + /* - If sequence conversion for regular group (scan mode enabled and */ + /* NbrOfConversion >=2), flag EOC is set only at the end of the */ + /* sequence. */ + /* To poll for each conversion, the maximum conversion time is computed */ + /* from ADC conversion time (selected sampling time + conversion time of */ + /* 12.5 ADC clock cycles) and APB2/ADC clock prescalers (depending on */ + /* settings, conversion time range can be from 28 to 32256 CPU cycles). */ + /* As flag EOC is not set after each conversion, no timeout status can */ + /* be set. */ + if (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_SCAN) && + HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ) + { + /* Wait until End of Conversion flag is raised */ + while(HAL_IS_BIT_CLR(hadc->Instance->SR, ADC_FLAG_EOC)) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* New check to avoid false timeout detection in case of preemption */ + if(HAL_IS_BIT_CLR(hadc->Instance->SR, ADC_FLAG_EOC)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + } + else + { + /* Replace polling by wait for maximum conversion time */ + /* - Computation of CPU clock cycles corresponding to ADC clock cycles */ + /* and ADC maximum conversion cycles on all channels. */ + /* - Wait for the expected ADC clock cycles delay */ + Conversion_Timeout_CPU_cycles_max = ((SystemCoreClock + / HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_ADC)) + * ADC_CONVCYCLES_MAX_RANGE(hadc) ); + + while(Conversion_Timeout_CPU_cycles < Conversion_Timeout_CPU_cycles_max) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + /* New check to avoid false timeout detection in case of preemption */ + if(Conversion_Timeout_CPU_cycles < Conversion_Timeout_CPU_cycles_max) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + Conversion_Timeout_CPU_cycles ++; + } + } + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC); + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32F1 devices, in case of sequencer enabled */ + /* (several ranks selected), end of conversion flag is raised */ + /* at the end of the sequence. */ + if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Return ADC state */ + return HAL_OK; +} + +/** + * @brief Poll for conversion event. + * @param hadc: ADC handle + * @param EventType: the ADC event type. + * This parameter can be one of the following values: + * @arg ADC_AWD_EVENT: ADC Analog watchdog event. + * @param Timeout: Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while(__HAL_ADC_GET_FLAG(hadc, EventType) == RESET) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* New check to avoid false timeout detection in case of preemption */ + if(__HAL_ADC_GET_FLAG(hadc, EventType) == RESET) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + + /* Analog watchdog (level out of window) event */ + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD); + + /* Return ADC state */ + return HAL_OK; +} + +/** + * @brief Enables ADC, starts conversion of regular group with interruption. + * Interruptions enabled in this function: + * - EOC (end of conversion of regular group) + * Each of these interruptions has its dedicated callback function. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set group injected state (from auto-injection) and multimode state */ + /* for all cases of multimode: independent mode, multimode ADC master */ + /* or multimode ADC slave (for devices with several ADCs): */ + if (ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc)) + { + /* Set ADC state (ADC independent or master) */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + } + else + { + /* Set ADC state (ADC slave) */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (ADC_MULTIMODE_AUTO_INJECTED(hadc)) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* State machine update: Check if an injected conversion is ongoing */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to conversions on group regular */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC); + + /* Enable end of conversion interrupt for regular group */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Case of multimode enabled: */ + /* - if ADC is slave, ADC is enabled only (conversion is not started). */ + /* - if ADC is master, ADC is enabled and conversion is started. */ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc) && + ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc) ) + { + /* Start ADC conversion on regular group with SW start */ + SET_BIT(hadc->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTTRIG)); + } + else + { + /* Start ADC conversion on regular group with external trigger */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_EXTTRIG); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc: ADC handle + * @retval None + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enables ADC, starts conversion of regular group and transfers result + * through DMA. + * Interruptions enabled in this function: + * - DMA transfer complete + * - DMA half transfer + * Each of these interruptions has its dedicated callback function. + * @note For devices with several ADCs: This function is for single-ADC mode + * only. For multimode, use the dedicated MultimodeStart function. + * @note On STM32F1 devices, only ADC1 and ADC3 (ADC availability depending + * on devices) have DMA capability. + * ADC2 converted data can be transferred in dual ADC mode using DMA + * of ADC1 (ADC master in multimode). + * In case of using ADC1 with DMA on a device featuring 2 ADC + * instances: ADC1 conversion register DR contains ADC1 conversion + * result (ADC1 register DR bits 0 to 11) and, additionally, ADC2 last + * conversion result (ADC1 register DR bits 16 to 27). Therefore, to + * have DMA transferring the conversion results of ADC1 only, DMA must + * be configured to transfer size: half word. + * @param hadc: ADC handle + * @param pData: The destination Buffer address. + * @param Length: The length of data to be transferred from ADC peripheral to memory. + * @retval None + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_DMA_CAPABILITY_INSTANCE(hadc->Instance)); + + /* Verification if multimode is disabled (for devices with several ADC) */ + /* If multimode is enabled, dedicated function multimode conversion */ + /* start DMA must be used. */ + if(ADC_MULTIMODE_IS_ENABLE(hadc) == RESET) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set group injected state (from auto-injection) and multimode state */ + /* for all cases of multimode: independent mode, multimode ADC master */ + /* or multimode ADC slave (for devices with several ADCs): */ + if (ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc)) + { + /* Set ADC state (ADC independent or master) */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + } + else + { + /* Set ADC state (ADC slave) */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (ADC_MULTIMODE_AUTO_INJECTED(hadc)) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* State machine update: Check if an injected conversion is ongoing */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to conversions on group regular */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC); + + /* Enable ADC DMA mode */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_DMA); + + /* Start the DMA channel */ + HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc)) + { + /* Start ADC conversion on regular group with SW start */ + SET_BIT(hadc->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTTRIG)); + } + else + { + /* Start ADC conversion on regular group with external trigger */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_EXTTRIG); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + } + else + { + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @note For devices with several ADCs: This function is for single-ADC mode + * only. For multimode, use the dedicated MultimodeStop function. + * @note On STM32F1 devices, only ADC1 and ADC3 (ADC availability depending + * on devices) have DMA capability. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_DMA_CAPABILITY_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC DMA mode */ + CLEAR_BIT(hadc->Instance->CR2, ADC_CR2_DMA); + + /* Disable the DMA channel (in case of DMA in circular mode or stop while */ + /* DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc: ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Handles ADC interrupt request + * @param hadc: ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + + /* ========== Check End of Conversion flag for regular group ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC) ) + { + /* Update state machine on conversion status if not in error state */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32F1 devices, in case of sequencer enabled */ + /* (several ranks selected), end of conversion flag is raised */ + /* at the end of the sequence. */ + if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) + { + /* Disable ADC end of conversion interrupt on group regular */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC); + } + } + + /* ========== Check End of Conversion flag for injected group ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)) + { + /* Update state machine on conversion status if not in error state */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); + } + + /* Determine whether any further conversion upcoming on group injected */ + /* by external trigger, scan sequence on going or by automatic injected */ + /* conversion from group regular (same conditions as group regular */ + /* interruption disabling above). */ + /* Note: On STM32F1 devices, in case of sequencer enabled */ + /* (several ranks selected), end of conversion flag is raised */ + /* at the end of the sequence. */ + if(ADC_IS_SOFTWARE_START_INJECTED(hadc) || + (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) && + (ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) ) ) + { + /* Disable ADC end of conversion interrupt on group injected */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->InjectedConvCpltCallback(hadc); +#else + HAL_ADCEx_InjectedConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear injected group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC)); + } + } + + /* ========== Check Analog watchdog flags ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear the ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD); + } + } + +} + +/** + * @brief Conversion complete callback in non blocking mode + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non blocking mode + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog callback in non blocking mode. + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non blocking mode + * (ADC conversion with interruption or transfer by DMA) + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configures the the selected channel to be linked to the regular + * group. + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into regular group, following + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_ChannelConfTypeDef" on the fly, without reseting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_ChannelConfTypeDef". + * @param hadc: ADC handle + * @param sConfig: Structure of ADC channel for regular group. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + __IO uint32_t wait_loop_index = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfig->Channel)); + assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); + assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime)); + + /* Process locked */ + __HAL_LOCK(hadc); + + + /* Regular sequence configuration */ + /* For Rank 1 to 6 */ + if (sConfig->Rank < 7U) + { + MODIFY_REG(hadc->Instance->SQR3 , + ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank) , + ADC_SQR3_RK(sConfig->Channel, sConfig->Rank) ); + } + /* For Rank 7 to 12 */ + else if (sConfig->Rank < 13U) + { + MODIFY_REG(hadc->Instance->SQR2 , + ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank) , + ADC_SQR2_RK(sConfig->Channel, sConfig->Rank) ); + } + /* For Rank 13 to 16 */ + else + { + MODIFY_REG(hadc->Instance->SQR1 , + ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank) , + ADC_SQR1_RK(sConfig->Channel, sConfig->Rank) ); + } + + + /* Channel sampling time configuration */ + /* For channels 10 to 17 */ + if (sConfig->Channel >= ADC_CHANNEL_10) + { + MODIFY_REG(hadc->Instance->SMPR1 , + ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel) , + ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel) ); + } + else /* For channels 0 to 9 */ + { + MODIFY_REG(hadc->Instance->SMPR2 , + ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel) , + ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel) ); + } + + /* If ADC1 Channel_16 or Channel_17 is selected, enable Temperature sensor */ + /* and VREFINT measurement path. */ + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || + (sConfig->Channel == ADC_CHANNEL_VREFINT) ) + { + /* For STM32F1 devices with several ADC: Only ADC1 can access internal */ + /* measurement channels (VrefInt/TempSensor). If these channels are */ + /* intended to be set on other ADC instances, an error is reported. */ + if (hadc->Instance == ADC1) + { + if (READ_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE) == RESET) + { + SET_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE); + + if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + { + /* Delay for temperature sensor stabilization time */ + /* Compute number of CPU cycles to wait for */ + wait_loop_index = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U)); + while(wait_loop_index != 0U) + { + wait_loop_index--; + } + } + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Configures the analog watchdog. + * @note Analog watchdog thresholds can be modified while ADC conversion + * is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc: ADC handle + * @param AnalogWDGConfig: Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); + assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); + assert_param(IS_ADC_RANGE(AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(AnalogWDGConfig->LowThreshold)); + + if((AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) || + (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || + (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) ) + { + assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Analog watchdog configuration */ + + /* Configure ADC Analog watchdog interrupt */ + if(AnalogWDGConfig->ITMode == ENABLE) + { + /* Enable the ADC Analog watchdog interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD); + } + else + { + /* Disable the ADC Analog watchdog interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD); + } + + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: regular and/or injected groups, */ + /* one or all channels. */ + /* - Set the Analog watchdog channel (is not used if watchdog */ + /* mode "all channels": ADC_CFGR_AWD1SGL=0). */ + MODIFY_REG(hadc->Instance->CR1 , + ADC_CR1_AWDSGL | + ADC_CR1_JAWDEN | + ADC_CR1_AWDEN | + ADC_CR1_AWDCH , + AnalogWDGConfig->WatchdogMode | + AnalogWDGConfig->Channel ); + + /* Set the high threshold */ + WRITE_REG(hadc->Instance->HTR, AnalogWDGConfig->HighThreshold); + + /* Set the low threshold */ + WRITE_REG(hadc->Instance->LTR, AnalogWDGConfig->LowThreshold); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief return the ADC state + * @param hadc: ADC handle + * @retval HAL state + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc) +{ + /* Return ADC state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code + * @param hadc: ADC handle + * @retval ADC Error Code + */ +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) +{ + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc) +{ + uint32_t tickstart = 0U; + __IO uint32_t wait_loop_index = 0U; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (ADC_IS_ENABLE(hadc) == RESET) + { + /* Enable the Peripheral */ + __HAL_ADC_ENABLE(hadc); + + /* Delay for ADC stabilization time */ + /* Compute number of CPU cycles to wait for */ + wait_loop_index = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); + while(wait_loop_index != 0U) + { + wait_loop_index--; + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait for ADC effectively enabled */ + while(ADC_IS_ENABLE(hadc) == RESET) + { + if((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if(ADC_IS_ENABLE(hadc) == RESET) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Stop ADC conversion and disable the selected ADC + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped to disable the ADC. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc) +{ + uint32_t tickstart = 0U; + + /* Verification if ADC is not already disabled */ + if (ADC_IS_ENABLE(hadc) != RESET) + { + /* Disable the ADC peripheral */ + __HAL_ADC_DISABLE(hadc); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait for ADC effectively disabled */ + while(ADC_IS_ENABLE(hadc) != RESET) + { + if((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if(ADC_IS_ENABLE(hadc) != RESET) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma: pointer to DMA handle. + * @retval None + */ +void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32F1 devices, in case of sequencer enabled */ + /* (several ranks selected), end of conversion flag is raised */ + /* at the end of the sequence. */ + if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma: pointer to DMA handle. + * @retval None + */ +void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback + * @param hdma: pointer to DMA handle. + * @retval None + */ +void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c new file mode 100644 index 0000000..dc7408a --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c @@ -0,0 +1,1337 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_adc_ex.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) + * peripheral: + * + Operation functions + * ++ Start, stop, get result of conversions of injected + * group, using 2 possible modes: polling, interruption. + * ++ Multimode feature (available on devices with 2 ADCs or more) + * ++ Calibration (ADC automatic self-calibration) + * + Control functions + * ++ Channels configuration on injected group + * Other functions (generic functions) are available in file + * "stm32f1xx_hal_adc.c". + * + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32f1xx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extension HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ADCEx_Private_Constants ADCEx Private Constants + * @{ + */ + + /* Delay for ADC calibration: */ + /* Hardware prerequisite before starting a calibration: the ADC must have */ + /* been in power-on state for at least two ADC clock cycles. */ + /* Unit: ADC clock cycles */ + #define ADC_PRECALIBRATION_DELAY_ADCCLOCKCYCLES 2U + + /* Timeout value for ADC calibration */ + /* Value defined to be higher than worst cases: low clocks freq, */ + /* maximum prescaler. */ + /* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ + /* prescaler 4, sampling time 12.5 ADC clock cycles, resolution 12 bits. */ + /* Unit: ms */ + #define ADC_CALIBRATION_TIMEOUT 10U + + /* Delay for temperature sensor stabilization time. */ + /* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */ + /* Unit: us */ + #define ADC_TEMPSENSOR_DELAY_US 10U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADCEx Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 Extended Extended IO operation functions + * @brief Extended Extended Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of injected group. + (+) Stop conversion of injected group. + (+) Poll for conversion complete on injected group. + (+) Get result of injected channel conversion. + (+) Start conversion of injected group and enable interruptions. + (+) Stop conversion of injected group and disable interruptions. + + (+) Start multimode and enable DMA transfer. + (+) Stop multimode and disable ADC DMA transfer. + (+) Get result of multimode conversion. + + (+) Perform the ADC self-calibration for single or differential ending. + (+) Get calibration factors for single or differential ending. + (+) Set calibration factors for single or differential ending. + +@endverbatim + * @{ + */ + +/** + * @brief Perform an ADC automatic self-calibration + * Calibration prerequisite: ADC must be disabled (execute this + * function before HAL_ADC_Start() or after HAL_ADC_Stop() ). + * During calibration process, ADC is enabled. ADC is let enabled at + * the completion of this function. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tickstart; + __IO uint32_t wait_loop_index = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Calibration prerequisite: */ + /* - ADC must be disabled for at least two ADC clock cycles in disable */ + /* mode before ADC enable */ + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Hardware prerequisite: delay before starting the calibration. */ + /* - Computation of CPU clock cycles corresponding to ADC clock cycles. */ + /* - Wait for the expected ADC clock cycles delay */ + wait_loop_index = ((SystemCoreClock + / HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_ADC)) + * ADC_PRECALIBRATION_DELAY_ADCCLOCKCYCLES ); + + while(wait_loop_index != 0U) + { + wait_loop_index--; + } + + /* 2. Enable the ADC peripheral */ + ADC_Enable(hadc); + + /* 3. Resets ADC calibration registers */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_RSTCAL); + + tickstart = HAL_GetTick(); + + /* Wait for calibration reset completion */ + while(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_RSTCAL)) + { + if((HAL_GetTick() - tickstart) > ADC_CALIBRATION_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_RSTCAL)) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + } + + /* 4. Start ADC calibration */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_CAL); + + tickstart = HAL_GetTick(); + + /* Wait for calibration completion */ + while(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_CAL)) + { + if((HAL_GetTick() - tickstart) > ADC_CALIBRATION_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_CAL)) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + } + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enables ADC, starts conversion of injected group. + * Interruptions enabled in this function: None. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to injected group conversion results */ + /* - Set state bitfield related to injected operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, + HAL_ADC_STATE_INJ_BUSY); + + /* Case of independent mode or multimode (for devices with several ADCs): */ + /* Set multimode state. */ + if (ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc)) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } + + /* Check if a regular conversion is ongoing */ + /* Note: On this device, there is no ADC error code fields related to */ + /* conversions on group injected only. In case of conversion on */ + /* going on group regular, no error code is reset. */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear injected group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); + + /* Enable conversion of injected group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* If automatic injected conversion is enabled, conversion will start */ + /* after next regular group conversion. */ + /* Case of multimode enabled (for devices with several ADCs): if ADC is */ + /* slave, ADC is enabled only (conversion is not started). If ADC is */ + /* master, ADC is enabled and conversion is started. */ + if (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO)) + { + if (ADC_IS_SOFTWARE_START_INJECTED(hadc) && + ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc) ) + { + /* Start ADC conversion on injected group with SW start */ + SET_BIT(hadc->Instance->CR2, (ADC_CR2_JSWSTART | ADC_CR2_JEXTTRIG)); + } + else + { + /* Start ADC conversion on injected group with external trigger */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_JEXTTRIG); + } + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop conversion of injected channels. Disable ADC peripheral if + * no regular conversion is on going. + * @note If ADC must be disabled and if conversion is on going on + * regular group, function HAL_ADC_Stop must be used to stop both + * injected and regular groups, and disable the ADC. + * @note If injected group mode auto-injection is enabled, + * function HAL_ADC_Stop must be used. + * @note In case of auto-injection mode, HAL_ADC_Stop must be used. + * @param hadc: ADC handle + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion and disable ADC peripheral */ + /* Conditioned to: */ + /* - No conversion on the other group (regular group) is intended to */ + /* continue (injected and regular groups stop conversion and ADC disable */ + /* are common) */ + /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */ + if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) && + HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) + { + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for injected group conversion to be completed. + * @param hadc: ADC handle + * @param Timeout: Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Variables for polling in case of scan mode enabled and polling for each */ + /* conversion. */ + __IO uint32_t Conversion_Timeout_CPU_cycles = 0U; + uint32_t Conversion_Timeout_CPU_cycles_max = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Polling for end of conversion: differentiation if single/sequence */ + /* conversion. */ + /* For injected group, flag JEOC is set only at the end of the sequence, */ + /* not for each conversion within the sequence. */ + /* - If single conversion for injected group (scan mode disabled or */ + /* InjectedNbrOfConversion ==1), flag JEOC is used to determine the */ + /* conversion completion. */ + /* - If sequence conversion for injected group (scan mode enabled and */ + /* InjectedNbrOfConversion >=2), flag JEOC is set only at the end of the */ + /* sequence. */ + /* To poll for each conversion, the maximum conversion time is computed */ + /* from ADC conversion time (selected sampling time + conversion time of */ + /* 12.5 ADC clock cycles) and APB2/ADC clock prescalers (depending on */ + /* settings, conversion time range can be from 28 to 32256 CPU cycles). */ + /* As flag JEOC is not set after each conversion, no timeout status can */ + /* be set. */ + if ((hadc->Instance->JSQR & ADC_JSQR_JL) == RESET) + { + /* Wait until End of Conversion flag is raised */ + while(HAL_IS_BIT_CLR(hadc->Instance->SR, ADC_FLAG_JEOC)) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* New check to avoid false timeout detection in case of preemption */ + if(HAL_IS_BIT_CLR(hadc->Instance->SR, ADC_FLAG_JEOC)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + } + else + { + /* Replace polling by wait for maximum conversion time */ + /* - Computation of CPU clock cycles corresponding to ADC clock cycles */ + /* and ADC maximum conversion cycles on all channels. */ + /* - Wait for the expected ADC clock cycles delay */ + Conversion_Timeout_CPU_cycles_max = ((SystemCoreClock + / HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_ADC)) + * ADC_CONVCYCLES_MAX_RANGE(hadc) ); + + while(Conversion_Timeout_CPU_cycles < Conversion_Timeout_CPU_cycles_max) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* New check to avoid false timeout detection in case of preemption */ + if(Conversion_Timeout_CPU_cycles < Conversion_Timeout_CPU_cycles_max) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + Conversion_Timeout_CPU_cycles ++; + } + } + + /* Clear injected group conversion flag */ + /* Note: On STM32F1 ADC, clear regular conversion flag raised */ + /* simultaneously. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JSTRT | ADC_FLAG_JEOC | ADC_FLAG_EOC); + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); + + /* Determine whether any further conversion upcoming on group injected */ + /* by external trigger or by automatic injected conversion */ + /* from group regular. */ + if(ADC_IS_SOFTWARE_START_INJECTED(hadc) || + (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) && + (ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) ) ) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Return ADC state */ + return HAL_OK; +} + +/** + * @brief Enables ADC, starts conversion of injected group with interruption. + * - JEOC (end of conversion of injected group) + * Each of these interruptions has its dedicated callback function. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to injected group conversion results */ + /* - Set state bitfield related to injected operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, + HAL_ADC_STATE_INJ_BUSY); + + /* Case of independent mode or multimode (for devices with several ADCs): */ + /* Set multimode state. */ + if (ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc)) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } + + /* Check if a regular conversion is ongoing */ + /* Note: On this device, there is no ADC error code fields related to */ + /* conversions on group injected only. In case of conversion on */ + /* going on group regular, no error code is reset. */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear injected group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); + + /* Enable end of conversion interrupt for injected channels */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); + + /* Start conversion of injected group if software start has been selected */ + /* and if automatic injected conversion is disabled. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* If automatic injected conversion is enabled, conversion will start */ + /* after next regular group conversion. */ + if (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO)) + { + if (ADC_IS_SOFTWARE_START_INJECTED(hadc) && + ADC_NONMULTIMODE_OR_MULTIMODEMASTER(hadc) ) + { + /* Start ADC conversion on injected group with SW start */ + SET_BIT(hadc->Instance->CR2, (ADC_CR2_JSWSTART | ADC_CR2_JEXTTRIG)); + } + else + { + /* Start ADC conversion on injected group with external trigger */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_JEXTTRIG); + } + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop conversion of injected channels, disable interruption of + * end-of-conversion. Disable ADC peripheral if no regular conversion + * is on going. + * @note If ADC must be disabled and if conversion is on going on + * regular group, function HAL_ADC_Stop must be used to stop both + * injected and regular groups, and disable the ADC. + * @note If injected group mode auto-injection is enabled, + * function HAL_ADC_Stop must be used. + * @param hadc: ADC handle + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion and disable ADC peripheral */ + /* Conditioned to: */ + /* - No conversion on the other group (regular group) is intended to */ + /* continue (injected and regular groups stop conversion and ADC disable */ + /* are common) */ + /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */ + if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) && + HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) + { + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for injected channels */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/** + * @brief Enables ADC, starts conversion of regular group and transfers result + * through DMA. + * Multimode must have been previously configured using + * HAL_ADCEx_MultiModeConfigChannel() function. + * Interruptions enabled in this function: + * - DMA transfer complete + * - DMA half transfer + * Each of these interruptions has its dedicated callback function. + * @note: On STM32F1 devices, ADC slave regular group must be configured + * with conversion trigger ADC_SOFTWARE_START. + * @note: ADC slave can be enabled preliminarily using single-mode + * HAL_ADC_Start() function. + * @param hadc: ADC handle of ADC master (handle of ADC slave must not be used) + * @param pData: The destination Buffer address. + * @param Length: The length of data to be transferred from ADC peripheral to memory. + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + ADC_HandleTypeDef tmphadcSlave={0}; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Set a temporary handle of the ADC slave associated to the ADC master */ + ADC_MULTI_SLAVE(hadc, &tmphadcSlave); + + /* On STM32F1 devices, ADC slave regular group must be configured with */ + /* conversion trigger ADC_SOFTWARE_START. */ + /* Note: External trigger of ADC slave must be enabled, it is already done */ + /* into function "HAL_ADC_Init()". */ + if(!ADC_IS_SOFTWARE_START_REGULAR(&tmphadcSlave)) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Enable the ADC peripherals: master and slave (in case if not already */ + /* enabled previously) */ + tmp_hal_status = ADC_Enable(hadc); + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Enable(&tmphadcSlave); + } + + /* Start conversion if all ADCs of multimode are effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state (ADC master) */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_MULTIMODE_SLAVE, + HAL_ADC_STATE_REG_BUSY); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC); + + /* Enable ADC DMA mode of ADC master */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_DMA); + + /* Start the DMA channel */ + HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Start conversion of regular group if software start has been selected. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Note: Alternate trigger for single conversion could be to force an */ + /* additional set of bit ADON "hadc->Instance->CR2 |= ADC_CR2_ADON;"*/ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc)) + { + /* Start ADC conversion on regular group with SW start */ + SET_BIT(hadc->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTTRIG)); + } + else + { + /* Start ADC conversion on regular group with external trigger */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_EXTTRIG); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @note Multimode is kept enabled after this function. To disable multimode + * (set with HAL_ADCEx_MultiModeConfigChannel(), ADC must be + * reinitialized using HAL_ADC_Init() or HAL_ADC_ReInit(). + * @note In case of DMA configured in circular mode, function + * HAL_ADC_Stop_DMA must be called after this function with handle of + * ADC slave, to properly disable the DMA channel. + * @param hadc: ADC handle of ADC master (handle of ADC slave must not be used) + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + ADC_HandleTypeDef tmphadcSlave={0}; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC master peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if(tmp_hal_status == HAL_OK) + { + /* Set a temporary handle of the ADC slave associated to the ADC master */ + ADC_MULTI_SLAVE(hadc, &tmphadcSlave); + + /* Disable ADC slave peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(&tmphadcSlave); + + /* Check if ADC is effectively disabled */ + if(tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Disable ADC DMA mode */ + CLEAR_BIT(hadc->Instance->CR2, ADC_CR2_DMA); + + /* Reset configuration of ADC DMA continuous request for dual mode */ + CLEAR_BIT(hadc->Instance->CR1, ADC_CR1_DUALMOD); + + /* Disable the DMA channel (in case of DMA in circular mode or stop while */ + /* while DMA transfer is on going) */ + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Change ADC state (ADC master) */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @brief Get ADC injected group conversion result. + * @note Reading register JDRx automatically clears ADC flag JEOC + * (ADC group injected end of unitary conversion). + * @note This function does not clear ADC flag JEOS + * (ADC group injected end of sequence conversion) + * Occurrence of flag JEOS rising: + * - If sequencer is composed of 1 rank, flag JEOS is equivalent + * to flag JEOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag JEOC only is raised, at the end of the scan sequence + * both flags JEOC and EOS are raised. + * Flag JEOS must not be cleared by this function because + * it would not be compliant with low power features + * (feature low power auto-wait, not available on all STM32 families). + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADCEx_InjectedPollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_JEOS). + * @param hadc: ADC handle + * @param InjectedRank: the converted ADC injected rank. + * This parameter can be one of the following values: + * @arg ADC_INJECTED_RANK_1: Injected Channel1 selected + * @arg ADC_INJECTED_RANK_2: Injected Channel2 selected + * @arg ADC_INJECTED_RANK_3: Injected Channel3 selected + * @arg ADC_INJECTED_RANK_4: Injected Channel4 selected + * @retval ADC group injected conversion data + */ +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank) +{ + uint32_t tmp_jdr = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_INJECTED_RANK(InjectedRank)); + + /* Get ADC converted value */ + switch(InjectedRank) + { + case ADC_INJECTED_RANK_4: + tmp_jdr = hadc->Instance->JDR4; + break; + case ADC_INJECTED_RANK_3: + tmp_jdr = hadc->Instance->JDR3; + break; + case ADC_INJECTED_RANK_2: + tmp_jdr = hadc->Instance->JDR2; + break; + case ADC_INJECTED_RANK_1: + default: + tmp_jdr = hadc->Instance->JDR1; + break; + } + + /* Return ADC converted value */ + return tmp_jdr; +} + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/** + * @brief Returns the last ADC Master&Slave regular conversions results data + * in the selected multi mode. + * @param hadc: ADC handle of ADC master (handle of ADC slave must not be used) + * @retval The converted data value. + */ +uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc) +{ + uint32_t tmpDR = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* On STM32F1 devices, ADC1 data register DR contains ADC2 conversions */ + /* only if ADC1 DMA mode is enabled. */ + tmpDR = hadc->Instance->DR; + + if (HAL_IS_BIT_CLR(ADC1->CR2, ADC_CR2_DMA)) + { + tmpDR |= (ADC2->DR << 16U); + } + + /* Return ADC converted value */ + return tmpDR; +} +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ + +/** + * @brief Injected conversion complete callback in non blocking mode + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ADCEx_InjectedConvCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup ADCEx_Exported_Functions_Group2 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on injected group + (+) Configure multimode + +@endverbatim + * @{ + */ + +/** + * @brief Configures the ADC injected group and the selected channel to be + * linked to the injected group. + * @note Possibility to update parameters on the fly: + * This function initializes injected group, following calls to this + * function can be used to reconfigure some parameters of structure + * "ADC_InjectionConfTypeDef" on the fly, without reseting the ADC. + * The setting of these parameters is conditioned to ADC state: + * this function must be called when ADC is not under conversion. + * @param hadc: ADC handle + * @param sConfigInjected: Structure of ADC injected group and ADC channel for + * injected group. + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + __IO uint32_t wait_loop_index = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel)); + assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime)); + assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv)); + assert_param(IS_ADC_EXTTRIGINJEC(sConfigInjected->ExternalTrigInjecConv)); + assert_param(IS_ADC_RANGE(sConfigInjected->InjectedOffset)); + + if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank)); + assert_param(IS_ADC_INJECTED_NB_CONV(sConfigInjected->InjectedNbrOfConversion)); + assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Configuration of injected group sequencer: */ + /* - if scan mode is disabled, injected channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "InjectedNbrOfConversion" is discarded. */ + /* Note: Scan mode is present by hardware on this device and, if */ + /* disabled, discards automatically nb of conversions. Anyway, nb of */ + /* conversions is forced to 0x00 for alignment over all STM32 devices. */ + /* - if scan mode is enabled, injected channels sequence length is set to */ + /* parameter "InjectedNbrOfConversion". */ + if (hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + if (sConfigInjected->InjectedRank == ADC_INJECTED_RANK_1) + { + /* Clear the old SQx bits for all injected ranks */ + MODIFY_REG(hadc->Instance->JSQR , + ADC_JSQR_JL | + ADC_JSQR_JSQ4 | + ADC_JSQR_JSQ3 | + ADC_JSQR_JSQ2 | + ADC_JSQR_JSQ1 , + ADC_JSQR_RK_JL(sConfigInjected->InjectedChannel, + ADC_INJECTED_RANK_1, + 0x01U)); + } + /* If another injected rank than rank1 was intended to be set, and could */ + /* not due to ScanConvMode disabled, error is reported. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + else + { + /* Since injected channels rank conv. order depends on total number of */ + /* injected conversions, selected rank must be below or equal to total */ + /* number of injected conversions to be updated. */ + if (sConfigInjected->InjectedRank <= sConfigInjected->InjectedNbrOfConversion) + { + /* Clear the old SQx bits for the selected rank */ + /* Set the SQx bits for the selected rank */ + MODIFY_REG(hadc->Instance->JSQR , + + ADC_JSQR_JL | + ADC_JSQR_RK_JL(ADC_JSQR_JSQ1, + sConfigInjected->InjectedRank, + sConfigInjected->InjectedNbrOfConversion) , + + ADC_JSQR_JL_SHIFT(sConfigInjected->InjectedNbrOfConversion) | + ADC_JSQR_RK_JL(sConfigInjected->InjectedChannel, + sConfigInjected->InjectedRank, + sConfigInjected->InjectedNbrOfConversion) ); + } + else + { + /* Clear the old SQx bits for the selected rank */ + MODIFY_REG(hadc->Instance->JSQR , + + ADC_JSQR_JL | + ADC_JSQR_RK_JL(ADC_JSQR_JSQ1, + sConfigInjected->InjectedRank, + sConfigInjected->InjectedNbrOfConversion) , + + 0x00000000U); + } + } + + /* Configuration of injected group */ + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - external trigger to start conversion */ + /* Parameters update not conditioned to ADC state: */ + /* - Automatic injected conversion */ + /* - Injected discontinuous mode */ + /* Note: In case of ADC already enabled, caution to not launch an unwanted */ + /* conversion while modifying register CR2 by writing 1 to bit ADON. */ + if (ADC_IS_ENABLE(hadc) == RESET) + { + MODIFY_REG(hadc->Instance->CR2 , + ADC_CR2_JEXTSEL | + ADC_CR2_ADON , + ADC_CFGR_JEXTSEL(hadc, sConfigInjected->ExternalTrigInjecConv) ); + } + + + /* Configuration of injected group */ + /* - Automatic injected conversion */ + /* - Injected discontinuous mode */ + + /* Automatic injected conversion can be enabled if injected group */ + /* external triggers are disabled. */ + if (sConfigInjected->AutoInjectedConv == ENABLE) + { + if (sConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START) + { + SET_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + + /* Injected discontinuous can be enabled only if auto-injected mode is */ + /* disabled. */ + if (sConfigInjected->InjectedDiscontinuousConvMode == ENABLE) + { + if (sConfigInjected->AutoInjectedConv == DISABLE) + { + SET_BIT(hadc->Instance->CR1, ADC_CR1_JDISCEN); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + + + /* InjectedChannel sampling time configuration */ + /* For channels 10 to 17 */ + if (sConfigInjected->InjectedChannel >= ADC_CHANNEL_10) + { + MODIFY_REG(hadc->Instance->SMPR1 , + ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel) , + ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel) ); + } + else /* For channels 0 to 9 */ + { + MODIFY_REG(hadc->Instance->SMPR2 , + ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel) , + ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel) ); + } + + /* If ADC1 InjectedChannel_16 or InjectedChannel_17 is selected, enable Temperature sensor */ + /* and VREFINT measurement path. */ + if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || + (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT) ) + { + SET_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE); + } + + + /* Configure the offset: offset enable/disable, InjectedChannel, offset value */ + switch(sConfigInjected->InjectedRank) + { + case 1: + /* Set injected channel 1 offset */ + MODIFY_REG(hadc->Instance->JOFR1, + ADC_JOFR1_JOFFSET1, + sConfigInjected->InjectedOffset); + break; + case 2: + /* Set injected channel 2 offset */ + MODIFY_REG(hadc->Instance->JOFR2, + ADC_JOFR2_JOFFSET2, + sConfigInjected->InjectedOffset); + break; + case 3: + /* Set injected channel 3 offset */ + MODIFY_REG(hadc->Instance->JOFR3, + ADC_JOFR3_JOFFSET3, + sConfigInjected->InjectedOffset); + break; + case 4: + default: + MODIFY_REG(hadc->Instance->JOFR4, + ADC_JOFR4_JOFFSET4, + sConfigInjected->InjectedOffset); + break; + } + + /* If ADC1 Channel_16 or Channel_17 is selected, enable Temperature sensor */ + /* and VREFINT measurement path. */ + if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || + (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT) ) + { + /* For STM32F1 devices with several ADC: Only ADC1 can access internal */ + /* measurement channels (VrefInt/TempSensor). If these channels are */ + /* intended to be set on other ADC instances, an error is reported. */ + if (hadc->Instance == ADC1) + { + if (READ_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE) == RESET) + { + SET_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE); + + if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR)) + { + /* Delay for temperature sensor stabilization time */ + /* Compute number of CPU cycles to wait for */ + wait_loop_index = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U)); + while(wait_loop_index != 0U) + { + wait_loop_index--; + } + } + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) +/** + * @brief Enable ADC multimode and configure multimode parameters + * @note Possibility to update parameters on the fly: + * This function initializes multimode parameters, following + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_MultiModeTypeDef" on the fly, without reseting + * the ADCs (both ADCs of the common group). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_MultiModeTypeDef". + * @note To change back configuration from multimode to single mode, ADC must + * be reset (using function HAL_ADC_Init() ). + * @param hadc: ADC handle + * @param multimode: Structure of ADC multimode configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + ADC_HandleTypeDef tmphadcSlave={0}; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_MODE(multimode->Mode)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Set a temporary handle of the ADC slave associated to the ADC master */ + ADC_MULTI_SLAVE(hadc, &tmphadcSlave); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - ADC master and ADC slave DMA configuration */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Multimode mode selection */ + /* To optimize code, all multimode settings can be set when both ADCs of */ + /* the common group are in state: disabled. */ + if ((ADC_IS_ENABLE(hadc) == RESET) && + (ADC_IS_ENABLE(&tmphadcSlave) == RESET) && + (IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)) ) + { + MODIFY_REG(hadc->Instance->CR1, + ADC_CR1_DUALMOD , + multimode->Mode ); + } + /* If one of the ADC sharing the same common group is enabled, no update */ + /* could be done on neither of the multimode structure parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} +#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_can.c similarity index 97% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_can.c index 4abdc60..331405e 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_can.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_can.c + * @file stm32f1xx_hal_can.c * @author MCD Application Team * @brief CAN HAL module driver. * This file provides firmware functions to manage the following @@ -12,17 +12,6 @@ * + Callbacks functions * + Peripheral State and Error functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -142,9 +131,9 @@ The compilation define USE_HAL_CAN_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Function HAL_CAN_RegisterCallback() to register an interrupt callback. + Use Function @ref HAL_CAN_RegisterCallback() to register an interrupt callback. - Function HAL_CAN_RegisterCallback() allows to register following callbacks: + Function @ref HAL_CAN_RegisterCallback() allows to register following callbacks: (+) TxMailbox0CompleteCallback : Tx Mailbox 0 Complete Callback. (+) TxMailbox1CompleteCallback : Tx Mailbox 1 Complete Callback. (+) TxMailbox2CompleteCallback : Tx Mailbox 2 Complete Callback. @@ -163,9 +152,9 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_CAN_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_CAN_UnRegisterCallback() to reset a callback to the default weak function. - HAL_CAN_UnRegisterCallback takes as parameters the HAL peripheral handle, + @ref HAL_CAN_UnRegisterCallback takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxMailbox0CompleteCallback : Tx Mailbox 0 Complete Callback. @@ -184,13 +173,13 @@ (+) MspInitCallback : CAN MspInit. (+) MspDeInitCallback : CAN MspDeInit. - By default, after the HAL_CAN_Init() and when the state is HAL_CAN_STATE_RESET, + By default, after the @ref HAL_CAN_Init() and when the state is HAL_CAN_STATE_RESET, all callbacks are set to the corresponding weak functions: - example HAL_CAN_ErrorCallback(). + example @ref HAL_CAN_ErrorCallback(). Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak function in the HAL_CAN_Init()/ HAL_CAN_DeInit() only when + reset to the legacy weak function in the @ref HAL_CAN_Init()/ @ref HAL_CAN_DeInit() only when these callbacks are null (not registered beforehand). - if not, MspInit or MspDeInit are not null, the HAL_CAN_Init()/ HAL_CAN_DeInit() + if not, MspInit or MspDeInit are not null, the @ref HAL_CAN_Init()/ @ref HAL_CAN_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in HAL_CAN_STATE_READY state only. @@ -198,8 +187,8 @@ in HAL_CAN_STATE_READY or HAL_CAN_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_CAN_RegisterCallback() before calling HAL_CAN_DeInit() - or HAL_CAN_Init() function. + using @ref HAL_CAN_RegisterCallback() before calling @ref HAL_CAN_DeInit() + or @ref HAL_CAN_Init() function. When The compilation define USE_HAL_CAN_REGISTER_CALLBACKS is set to 0 or not defined, the callback registration feature is not available and all callbacks @@ -207,12 +196,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -675,7 +675,7 @@ HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_Call /** * @brief Unregister a CAN CallBack. - * CAN callback is redirected to the weak predefined callback + * CAN callabck is redirected to the weak predefined callback * @param hcan pointer to a CAN_HandleTypeDef structure that contains * the configuration information for CAN module * @param CallbackID ID of the callback to be unregistered @@ -854,26 +854,7 @@ HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDe assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment)); assert_param(IS_CAN_FILTER_ACTIVATION(sFilterConfig->FilterActivation)); -#if defined(CAN3) - /* Check the CAN instance */ - if (hcan->Instance == CAN3) - { - /* CAN3 is single instance with 14 dedicated filters banks */ - - /* Check the parameters */ - assert_param(IS_CAN_FILTER_BANK_SINGLE(sFilterConfig->FilterBank)); - } - else - { - /* CAN1 and CAN2 are dual instances with 28 common filters banks */ - /* Select master instance to access the filter banks */ - can_ip = CAN1; - - /* Check the parameters */ - assert_param(IS_CAN_FILTER_BANK_DUAL(sFilterConfig->FilterBank)); - assert_param(IS_CAN_FILTER_BANK_DUAL(sFilterConfig->SlaveStartFilterBank)); - } -#elif defined(CAN2) +#if defined(CAN2) /* CAN1 and CAN2 are dual instances with 28 common filters banks */ /* Select master instance to access the filter banks */ can_ip = CAN1; @@ -891,16 +872,7 @@ HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDe /* Initialisation mode for the filter */ SET_BIT(can_ip->FMR, CAN_FMR_FINIT); -#if defined(CAN3) - /* Check the CAN instance */ - if (can_ip == CAN1) - { - /* Select the start filter number of CAN2 slave instance */ - CLEAR_BIT(can_ip->FMR, CAN_FMR_CAN2SB); - SET_BIT(can_ip->FMR, sFilterConfig->SlaveStartFilterBank << CAN_FMR_CAN2SB_Pos); - } - -#elif defined(CAN2) +#if defined(CAN2) /* Select the start filter number of CAN2 slave instance */ CLEAR_BIT(can_ip->FMR, CAN_FMR_CAN2SB); SET_BIT(can_ip->FMR, sFilterConfig->SlaveStartFilterBank << CAN_FMR_CAN2SB_Pos); @@ -2460,3 +2432,5 @@ HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c similarity index 55% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c index 56e6e84..9bf4815 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c @@ -1,34 +1,23 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_cec.c + * @file stm32f1xx_hal_cec.c * @author MCD Application Team * @brief CEC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the High Definition Multimedia Interface + * This file provides firmware functions to manage the following + * functionalities of the High Definition Multimedia Interface * Consumer Electronics Control Peripheral (CEC). * + Initialization and de-initialization function * + IO operation function * + Peripheral Control function * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim + * + @verbatim =============================================================================== ##### How to use this driver ##### =============================================================================== [..] The CEC HAL driver can be used as follow: - + (#) Declare a CEC_HandleTypeDef handle structure. (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API: (##) Enable the CEC interface clock. @@ -39,29 +28,26 @@ and HAL_CEC_Receive_IT() APIs): (+++) Configure the CEC interrupt priority. (+++) Enable the NVIC CEC IRQ handle. - (+++) The specific CEC interrupts (Transmission complete interrupt, + (+++) The specific CEC interrupts (Transmission complete interrupt, RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit + __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit and receive process. - (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in - in case of Bit Rising Error, Error-Bit generation conditions, device logical - address and Listen mode in the hcec Init structure. + (#) Program the Bit Timing Error Mode and the Bit Period Error Mode in the hcec Init structure. (#) Initialize the CEC registers by calling the HAL_CEC_Init() API. - [..] + [..] (@) This API (HAL_CEC_Init()) configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc) by calling the customed HAL_CEC_MspInit() API. *** Callback registration *** ============================================= - The compilation define USE_HAL_CEC_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_CEC_RegisterCallback() or HAL_CEC_RegisterXXXCallback() + Use Functions @ref HAL_CEC_RegisterCallback() or HAL_CEC_RegisterXXXCallback() to register an interrupt callback. - Function HAL_CEC_RegisterCallback() allows to register following callbacks: + Function @ref HAL_CEC_RegisterCallback() allows to register following callbacks: (+) TxCpltCallback : Tx Transfer completed callback. (+) ErrorCallback : callback for error detection. (+) MspInitCallback : CEC MspInit. @@ -69,12 +55,12 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - For specific callback HAL_CEC_RxCpltCallback use dedicated register callbacks - HAL_CEC_RegisterRxCpltCallback(). + For specific callback HAL_CEC_RxCpltCallback use dedicated register callbacks + @ref HAL_CEC_RegisterRxCpltCallback(). - Use function HAL_CEC_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_CEC_UnRegisterCallback() to reset a callback to the default weak function. - HAL_CEC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + @ref HAL_CEC_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxCpltCallback : Tx Transfer completed callback. @@ -82,16 +68,16 @@ (+) MspInitCallback : CEC MspInit. (+) MspDeInitCallback : CEC MspDeInit. - For callback HAL_CEC_RxCpltCallback use dedicated unregister callback : - HAL_CEC_UnRegisterRxCpltCallback(). + For callback HAL_CEC_RxCpltCallback use dedicated unregister callback : + @ref HAL_CEC_UnRegisterRxCpltCallback(). - By default, after the HAL_CEC_Init() and when the state is HAL_CEC_STATE_RESET + By default, after the @ref HAL_CEC_Init() and when the state is HAL_CEC_STATE_RESET all callbacks are set to the corresponding weak functions : - examples HAL_CEC_TxCpltCallback() , HAL_CEC_RxCpltCallback(). + examples @ref HAL_CEC_TxCpltCallback() , @ref HAL_CEC_RxCpltCallback(). Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak function in the HAL_CEC_Init()/ HAL_CEC_DeInit() only when + reset to the legacy weak function in the @ref HAL_CEC_Init()/ @ref HAL_CEC_DeInit() only when these callbacks are null (not registered beforehand). - if not, MspInit or MspDeInit are not null, the HAL_CEC_Init() / HAL_CEC_DeInit() + if not, MspInit or MspDeInit are not null, the @ref HAL_CEC_Init() / @ref HAL_CEC_DeInit() keep and use the user MspInit/MspDeInit functions (registered beforehand) Callbacks can be registered/unregistered in HAL_CEC_STATE_READY state only. @@ -99,20 +85,35 @@ in HAL_CEC_STATE_READY or HAL_CEC_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_CEC_RegisterCallback() before calling HAL_CEC_DeInit() - or HAL_CEC_Init() function. + using @ref HAL_CEC_RegisterCallback() before calling @ref HAL_CEC_DeInit() + or @ref HAL_CEC_Init() function. When the compilation define USE_HAL_CEC_REGISTER_CALLBACKS is set to 0 or not defined, the callback registration feature is not available and all callbacks are set to the corresponding weak functions. @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +#ifdef HAL_CEC_MODULE_ENABLED + +#if defined (CEC) + +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -120,28 +121,33 @@ * @brief HAL CEC module driver * @{ */ -#ifdef HAL_CEC_MODULE_ENABLED -#if defined (CEC) /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /** @defgroup CEC_Private_Constants CEC Private Constants * @{ */ +#define CEC_CFGR_FIELDS (CEC_CFGR_BTEM | CEC_CFGR_BPEM ) +#define CEC_FLAG_TRANSMIT_MASK (CEC_FLAG_TSOM|CEC_FLAG_TEOM|CEC_FLAG_TBTRF) +#define CEC_FLAG_RECEIVE_MASK (CEC_FLAG_RSOM|CEC_FLAG_REOM|CEC_FLAG_RBTF) +#define CEC_ESR_ALL_ERROR (CEC_ESR_BTE|CEC_ESR_BPE|CEC_ESR_RBTFE|CEC_ESR_SBE|CEC_ESR_ACKE|CEC_ESR_LINE|CEC_ESR_TBTFE) +#define CEC_RXXFERSIZE_INITIALIZE 0xFFFF /*!< Value used to initialise the RxXferSize of the handle */ /** * @} */ - + /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /** @defgroup CEC_Private_Functions CEC Private Functions * @{ */ +static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec); +static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec); /** * @} */ - + /* Exported functions ---------------------------------------------------------*/ /** @defgroup CEC_Exported_Functions CEC Exported Functions @@ -149,24 +155,18 @@ */ /** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions + * @brief Initialization and Configuration functions * -@verbatim +@verbatim =============================================================================== ##### Initialization and Configuration functions ##### - =============================================================================== + =============================================================================== [..] This subsection provides a set of functions allowing to initialize the CEC - (+) The following parameters need to be configured: - (++) SignalFreeTime - (++) Tolerance - (++) BRERxStop (RX stopped or not upon Bit Rising Error) - (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error) - (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error) - (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error) - (++) SignalFreeTimeOption (SFT Timer start definition) - (++) OwnAddress (CEC device address) - (++) ListenMode + (+) The following parameters need to be configured: + (++) TimingErrorFree + (++) PeriodErrorFree + (++) InitiatorAddress @endverbatim * @{ @@ -175,31 +175,24 @@ /** * @brief Initializes the CEC mode according to the specified * parameters in the CEC_InitTypeDef and creates the associated handle . - * @param hcec CEC handle + * @param hcec: CEC handle * @retval HAL status */ HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec) { /* Check the CEC handle allocation */ - if ((hcec == NULL) || (hcec->Init.RxBuffer == NULL)) + if((hcec == NULL) ||(hcec->Init.RxBuffer == NULL)) { return HAL_ERROR; } - /* Check the parameters */ + /* Check the parameters */ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance)); - assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime)); - assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance)); - assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop)); - assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen)); - assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen)); - assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen)); - assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption)); - assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode)); - assert_param(IS_CEC_OWN_ADDRESS(hcec->Init.OwnAddress)); - + assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(hcec->Init.TimingErrorFree)); + assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(hcec->Init.PeriodErrorFree)); + assert_param(IS_CEC_ADDRESS(hcec->Init.OwnAddress)); #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) - if (hcec->gState == HAL_CEC_STATE_RESET) + if(hcec->gState == HAL_CEC_STATE_RESET) { /* Allocate lock resource and initialize it */ hcec->Lock = HAL_UNLOCKED; @@ -208,7 +201,7 @@ HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec) hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak RxCpltCallback */ hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ - if (hcec->MspInitCallback == NULL) + if(hcec->MspInitCallback == NULL) { hcec->MspInitCallback = HAL_CEC_MspInit; /* Legacy weak MspInit */ } @@ -217,7 +210,7 @@ HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec) hcec->MspInitCallback(hcec); } #else - if (hcec->gState == HAL_CEC_STATE_RESET) + if(hcec->gState == HAL_CEC_STATE_RESET) { /* Allocate lock resource and initialize it */ hcec->Lock = HAL_UNLOCKED; @@ -227,53 +220,41 @@ HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec) #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ hcec->gState = HAL_CEC_STATE_BUSY; - + /* Disable the Peripheral */ __HAL_CEC_DISABLE(hcec); - + /* Write to CEC Control Register */ - hcec->Instance->CFGR = hcec->Init.SignalFreeTime | hcec->Init.Tolerance | hcec->Init.BRERxStop | \ - hcec->Init.BREErrorBitGen | hcec->Init.LBPEErrorBitGen | hcec->Init.BroadcastMsgNoErrorBitGen | \ - hcec->Init.SignalFreeTimeOption | ((uint32_t)(hcec->Init.OwnAddress) << 16U) | \ - hcec->Init.ListenMode; - - /* Enable the following CEC Transmission/Reception interrupts as - * well as the following CEC Transmission/Reception Errors interrupts - * Rx Byte Received IT - * End of Reception IT - * Rx overrun - * Rx bit rising error - * Rx short bit period error - * Rx long bit period error - * Rx missing acknowledge - * Tx Byte Request IT - * End of Transmission IT - * Tx Missing Acknowledge IT - * Tx-Error IT - * Tx-Buffer Underrun IT - * Tx arbitration lost */ - __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND | - CEC_IER_TX_ALL_ERR); + MODIFY_REG(hcec->Instance->CFGR, CEC_CFGR_FIELDS, hcec->Init.TimingErrorFree | hcec->Init.PeriodErrorFree); + + /* Write to CEC Own Address Register */ + MODIFY_REG(hcec->Instance->OAR, CEC_OAR_OA, hcec->Init.OwnAddress); + + /* Configure the prescaler to generate the required 50 microseconds time base.*/ + MODIFY_REG(hcec->Instance->PRES, CEC_PRES_PRES, 50U * (HAL_RCC_GetPCLK1Freq()/1000000U) - 1U); + + /* Enable the following CEC Interrupt */ + __HAL_CEC_ENABLE_IT(hcec, CEC_IT_IE); /* Enable the CEC Peripheral */ __HAL_CEC_ENABLE(hcec); - + hcec->ErrorCode = HAL_CEC_ERROR_NONE; hcec->gState = HAL_CEC_STATE_READY; hcec->RxState = HAL_CEC_STATE_READY; - + return HAL_OK; } /** - * @brief DeInitializes the CEC peripheral - * @param hcec CEC handle + * @brief DeInitializes the CEC peripheral + * @param hcec: CEC handle * @retval HAL status */ HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec) { /* Check the CEC handle allocation */ - if (hcec == NULL) + if(hcec == NULL) { return HAL_ERROR; } @@ -284,7 +265,7 @@ HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec) hcec->gState = HAL_CEC_STATE_BUSY; #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) - if (hcec->MspDeInitCallback == NULL) + if(hcec->MspDeInitCallback == NULL) { hcec->MspDeInitCallback = HAL_CEC_MspDeInit; /* Legacy weak MspDeInit */ } @@ -297,44 +278,23 @@ HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec) HAL_CEC_MspDeInit(hcec); #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ - /* Disable the Peripheral */ - __HAL_CEC_DISABLE(hcec); - - /* Clear Flags */ - __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND | CEC_FLAG_TXBR | CEC_FLAG_RXBR | CEC_FLAG_RXEND | CEC_ISR_ALL_ERROR); - - /* Disable the following CEC Transmission/Reception interrupts as - * well as the following CEC Transmission/Reception Errors interrupts - * Rx Byte Received IT - * End of Reception IT - * Rx overrun - * Rx bit rising error - * Rx short bit period error - * Rx long bit period error - * Rx missing acknowledge - * Tx Byte Request IT - * End of Transmission IT - * Tx Missing Acknowledge IT - * Tx-Error IT - * Tx-Buffer Underrun IT - * Tx arbitration lost */ - __HAL_CEC_DISABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND | - CEC_IER_TX_ALL_ERR); - + __HAL_RCC_CEC_FORCE_RESET(); + __HAL_RCC_CEC_RELEASE_RESET(); + hcec->ErrorCode = HAL_CEC_ERROR_NONE; hcec->gState = HAL_CEC_STATE_RESET; hcec->RxState = HAL_CEC_STATE_RESET; - + /* Process Unlock */ __HAL_UNLOCK(hcec); - + return HAL_OK; } /** * @brief Initializes the Own Address of the CEC device - * @param hcec CEC handle - * @param CEC_OwnAddress The CEC own address. + * @param hcec: CEC handle + * @param CEC_OwnAddress: The CEC own address. * @retval HAL status */ HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress) @@ -343,34 +303,34 @@ HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress)); if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY)) - { + { /* Process Locked */ - __HAL_LOCK(hcec); - + __HAL_LOCK(hcec); + hcec->gState = HAL_CEC_STATE_BUSY; - + /* Disable the Peripheral */ __HAL_CEC_DISABLE(hcec); - - if (CEC_OwnAddress != CEC_OWN_ADDRESS_NONE) + + if(CEC_OwnAddress != CEC_OWN_ADDRESS_NONE) { - hcec->Instance->CFGR |= ((uint32_t)CEC_OwnAddress << 16); + MODIFY_REG(hcec->Instance->OAR, CEC_OAR_OA, hcec->Init.OwnAddress); } else { - hcec->Instance->CFGR &= ~(CEC_CFGR_OAR); + CLEAR_BIT(hcec->Instance->OAR, CEC_OAR_OA); } - + hcec->gState = HAL_CEC_STATE_READY; hcec->ErrorCode = HAL_CEC_ERROR_NONE; - + /* Process Unlocked */ - __HAL_UNLOCK(hcec); - + __HAL_UNLOCK(hcec); + /* Enable the Peripheral */ __HAL_CEC_ENABLE(hcec); - - return HAL_OK; + + return HAL_OK; } else { @@ -380,31 +340,32 @@ HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC /** * @brief CEC MSP Init - * @param hcec CEC handle + * @param hcec: CEC handle * @retval None */ -__weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec) + __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec) { /* Prevent unused argument(s) compilation warning */ UNUSED(hcec); /* NOTE : This function should not be modified, when the callback is needed, the HAL_CEC_MspInit can be implemented in the user file - */ + */ } /** * @brief CEC MSP DeInit - * @param hcec CEC handle + * @param hcec: CEC handle * @retval None */ -__weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec) + __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec) { /* Prevent unused argument(s) compilation warning */ UNUSED(hcec); /* NOTE : This function should not be modified, when the callback is needed, the HAL_CEC_MspDeInit can be implemented in the user file - */ + */ } + #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) /** * @brief Register a User CEC Callback @@ -419,66 +380,65 @@ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec) * @param pCallback pointer to the Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, - pCEC_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, pCEC_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; - if (pCallback == NULL) + if(pCallback == NULL) { /* Update the error code */ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; return HAL_ERROR; } - /* Process locked */ + /* Process locked */ __HAL_LOCK(hcec); - if (hcec->gState == HAL_CEC_STATE_READY) + if(hcec->gState == HAL_CEC_STATE_READY) { switch (CallbackID) { - case HAL_CEC_TX_CPLT_CB_ID : - hcec->TxCpltCallback = pCallback; - break; + case HAL_CEC_TX_CPLT_CB_ID : + hcec->TxCpltCallback = pCallback; + break; - case HAL_CEC_ERROR_CB_ID : - hcec->ErrorCallback = pCallback; - break; + case HAL_CEC_ERROR_CB_ID : + hcec->ErrorCallback = pCallback; + break; - case HAL_CEC_MSPINIT_CB_ID : - hcec->MspInitCallback = pCallback; - break; + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = pCallback; + break; - case HAL_CEC_MSPDEINIT_CB_ID : - hcec->MspDeInitCallback = pCallback; - break; + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = pCallback; + break; - default : - /* Update the error code */ - hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; } } - else if (hcec->gState == HAL_CEC_STATE_RESET) + else if(hcec->gState == HAL_CEC_STATE_RESET) { switch (CallbackID) { - case HAL_CEC_MSPINIT_CB_ID : - hcec->MspInitCallback = pCallback; - break; + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = pCallback; + break; - case HAL_CEC_MSPDEINIT_CB_ID : - hcec->MspDeInitCallback = pCallback; - break; + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = pCallback; + break; - default : - /* Update the error code */ - hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; } } else @@ -497,11 +457,11 @@ HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_Call /** * @brief Unregister an CEC Callback - * CEC callback is redirected to the weak predefined callback + * CEC callabck is redirected to the weak predefined callback * @param hcec uart handle * @param CallbackID ID of the callback to be unregistered * This parameter can be one of the following values: - * @arg @ref HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID + * @arg @ref HAL_CEC_TX_CPLT_CB_ID Tx Complete callback IDD * @arg @ref HAL_CEC_ERROR_CB_ID Error callback ID * @arg @ref HAL_CEC_MSPINIT_CB_ID MspInit callback ID * @arg @ref HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID @@ -514,52 +474,52 @@ HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_Ca /* Process locked */ __HAL_LOCK(hcec); - if (hcec->gState == HAL_CEC_STATE_READY) + if(hcec->gState == HAL_CEC_STATE_READY) { switch (CallbackID) { - case HAL_CEC_TX_CPLT_CB_ID : - hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; + case HAL_CEC_TX_CPLT_CB_ID : + hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; - case HAL_CEC_ERROR_CB_ID : - hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ - break; + case HAL_CEC_ERROR_CB_ID : + hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ + break; - case HAL_CEC_MSPINIT_CB_ID : - hcec->MspInitCallback = HAL_CEC_MspInit; - break; + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = HAL_CEC_MspInit; + break; - case HAL_CEC_MSPDEINIT_CB_ID : - hcec->MspDeInitCallback = HAL_CEC_MspDeInit; - break; + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; + break; - default : - /* Update the error code */ - hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; } } - else if (hcec->gState == HAL_CEC_STATE_RESET) + else if(hcec->gState == HAL_CEC_STATE_RESET) { switch (CallbackID) { - case HAL_CEC_MSPINIT_CB_ID : - hcec->MspInitCallback = HAL_CEC_MspInit; - break; + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = HAL_CEC_MspInit; + break; - case HAL_CEC_MSPDEINIT_CB_ID : - hcec->MspDeInitCallback = HAL_CEC_MspDeInit; - break; + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; + break; - default : - /* Update the error code */ - hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; } } else @@ -587,7 +547,7 @@ HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_R { HAL_StatusTypeDef status = HAL_OK; - if (pCallback == NULL) + if(pCallback == NULL) { /* Update the error code */ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; @@ -596,7 +556,7 @@ HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_R /* Process locked */ __HAL_LOCK(hcec); - if (HAL_CEC_STATE_READY == hcec->RxState) + if(HAL_CEC_STATE_READY == hcec->RxState) { hcec->RxCpltCallback = pCallback; } @@ -626,7 +586,7 @@ HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec) /* Process locked */ __HAL_LOCK(hcec); - if (HAL_CEC_STATE_READY == hcec->RxState) + if(HAL_CEC_STATE_READY == hcec->RxState) { hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak CEC RxCpltCallback */ } @@ -648,27 +608,28 @@ HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec) * @} */ -/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions - * @brief CEC Transmit/Receive functions +/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions + * @brief CEC Transmit/Receive functions * -@verbatim - =============================================================================== - ##### IO operation functions ##### +@verbatim =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the CEC data transfers. - + (#) The CEC handle must contain the initiator (TX side) and the destination (RX side) logical addresses (4-bit long addresses, 0xF for broadcast messages destination) - - (#) The communication is performed using Interrupts. + + (#) The communication is performed using Interrupts. These API's return the HAL status. - The end of the data processing will be indicated through the + The end of the data processing will be indicated through the dedicated CEC IRQ when using Interrupt mode. - The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks + The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks will be executed respectively at the end of the transmit or Receive process - The HAL_CEC_ErrorCallback() user callback will be executed when a communication + The HAL_CEC_ErrorCallback() user callback will be executed when a communication error is detected - + (#) API's with Interrupt are : (+) HAL_CEC_Transmit_IT() (+) HAL_CEC_IRQHandler() @@ -677,38 +638,37 @@ HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec) (+) HAL_CEC_TxCpltCallback() (+) HAL_CEC_RxCpltCallback() (+) HAL_CEC_ErrorCallback() - + @endverbatim * @{ */ /** - * @brief Send data in interrupt mode - * @param hcec CEC handle - * @param InitiatorAddress Initiator address - * @param DestinationAddress destination logical address - * @param pData pointer to input byte data buffer - * @param Size amount of data to be sent in bytes (without counting the header). + * @brief Send data in interrupt mode + * @param hcec: CEC handle + * @param InitiatorAddress: Initiator address + * @param DestinationAddress: destination logical address + * @param pData: pointer to input byte data buffer + * @param Size: amount of data to be sent in bytes (without counting the header). * 0 means only the header is sent (ping operation). - * Maximum TX size is 15 bytes (1 opcode and up to 14 operands). + * Maximum TX size is 15 bytes (1 opcode and up to 14 operands). * @retval HAL status */ -HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, - uint8_t *pData, uint32_t Size) +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size) { - /* if the peripheral isn't already busy and if there is no previous transmission + /* if the IP isn't already busy and if there is no previous transmission already pending due to arbitration lost */ - if (hcec->gState == HAL_CEC_STATE_READY) - { - if ((pData == NULL) && (Size > 0U)) + if(hcec->gState == HAL_CEC_STATE_READY) + { + if((pData == NULL ) && (Size > 0U)) { return HAL_ERROR; } assert_param(IS_CEC_ADDRESS(DestinationAddress)); - assert_param(IS_CEC_ADDRESS(InitiatorAddress)); + assert_param(IS_CEC_ADDRESS(InitiatorAddress)); assert_param(IS_CEC_MSGSIZE(Size)); - + /* Process Locked */ __HAL_LOCK(hcec); hcec->pTxBuffPtr = pData; @@ -716,37 +676,38 @@ HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t Initiator hcec->ErrorCode = HAL_CEC_ERROR_NONE; /* initialize the number of bytes to send, - * 0 means only one header is sent (ping operation) */ - hcec->TxXferCount = (uint16_t)Size; - - /* in case of no payload (Size = 0), sender is only pinging the system; - Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */ - if (Size == 0U) - { - __HAL_CEC_LAST_BYTE_TX_SET(hcec); - } + * 0 means only one header is sent (ping operation) */ + hcec->TxXferCount = Size; /* send header block */ - hcec->Instance->TXDR = (uint32_t)(((uint32_t)InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress); - - /* Set TX Start of Message (TXSOM) bit */ - __HAL_CEC_FIRST_BYTE_TX_SET(hcec); - + hcec->Instance->TXD = (uint8_t)((uint32_t)InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress; + /* Process Unlocked */ - __HAL_UNLOCK(hcec); + __HAL_UNLOCK(hcec); + /* case no data to be sent, sender is only pinging the system */ + if (Size != 0) + { + /* Set TX Start of Message (TXSOM) bit */ + MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, CEC_FLAG_TSOM); + } + else + { + /* Send a ping command */ + MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, CEC_FLAG_TEOM|CEC_FLAG_TSOM); + } return HAL_OK; } else { - return HAL_BUSY; + return HAL_BUSY; } } /** * @brief Get size of the received frame. - * @param hcec CEC handle + * @param hcec: CEC handle * @retval Frame size */ uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec) @@ -756,158 +717,92 @@ uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec) /** * @brief Change Rx Buffer. - * @param hcec CEC handle - * @param Rxbuffer Rx Buffer - * @note This function can be called only inside the HAL_CEC_RxCpltCallback() + * @param hcec: CEC handle + * @param Rxbuffer: Rx Buffer + * @note This function can be called only inside the HAL_CEC_RxCpltCallback() * @retval Frame size */ -void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer) +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer) { - hcec->Init.RxBuffer = Rxbuffer; + hcec->Init.RxBuffer = Rxbuffer; } - + /** * @brief This function handles CEC interrupt requests. - * @param hcec CEC handle + * @param hcec: CEC handle * @retval None */ void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec) { + /* Save error status register for further error handling purposes */ + hcec->ErrorCode = READ_BIT(hcec->Instance->ESR, CEC_ESR_ALL_ERROR); - /* save interrupts register for further error or interrupts handling purposes */ - uint32_t reg; - reg = hcec->Instance->ISR; - - - /* ----------------------------Arbitration Lost Management----------------------------------*/ - /* CEC TX arbitration error interrupt occurred --------------------------------------*/ - if ((reg & CEC_FLAG_ARBLST) != 0U) + /* Transmit error */ + if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TERR) != RESET) { - hcec->ErrorCode = HAL_CEC_ERROR_ARBLST; - __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST); - } - - /* ----------------------------Rx Management----------------------------------*/ - /* CEC RX byte received interrupt ---------------------------------------------------*/ - if ((reg & CEC_FLAG_RXBR) != 0U) - { - /* reception is starting */ - hcec->RxState = HAL_CEC_STATE_BUSY_RX; - hcec->RxXferSize++; - /* read received byte */ - *hcec->Init.RxBuffer = (uint8_t) hcec->Instance->RXDR; - hcec->Init.RxBuffer++; - __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR); - } - - /* CEC RX end received interrupt ---------------------------------------------------*/ - if ((reg & CEC_FLAG_RXEND) != 0U) - { - /* clear IT */ - __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND); - - /* Rx process is completed, restore hcec->RxState to Ready */ - hcec->RxState = HAL_CEC_STATE_READY; - hcec->ErrorCode = HAL_CEC_ERROR_NONE; - hcec->Init.RxBuffer -= hcec->RxXferSize; -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) - hcec->RxCpltCallback(hcec, hcec->RxXferSize); -#else - HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize); -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ - hcec->RxXferSize = 0U; - } - - /* ----------------------------Tx Management----------------------------------*/ - /* CEC TX byte request interrupt ------------------------------------------------*/ - if ((reg & CEC_FLAG_TXBR) != 0U) - { - --hcec->TxXferCount; - if (hcec->TxXferCount == 0U) - { - /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */ - __HAL_CEC_LAST_BYTE_TX_SET(hcec); - } - /* In all cases transmit the byte */ - hcec->Instance->TXDR = *hcec->pTxBuffPtr; - hcec->pTxBuffPtr++; - /* clear Tx-Byte request flag */ - __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR); - } - - /* CEC TX end interrupt ------------------------------------------------*/ - if ((reg & CEC_FLAG_TXEND) != 0U) - { - __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND); - - /* Tx process is ended, restore hcec->gState to Ready */ + /* Acknowledgement of the error */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TERR); + hcec->gState = HAL_CEC_STATE_READY; - /* Call the Process Unlocked before calling the Tx call back API to give the possibility to - start again the Transmission under the Tx call back API */ - __HAL_UNLOCK(hcec); - hcec->ErrorCode = HAL_CEC_ERROR_NONE; -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) - hcec->TxCpltCallback(hcec); -#else - HAL_CEC_TxCpltCallback(hcec); -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ } - - /* ----------------------------Rx/Tx Error Management----------------------------------*/ - if ((reg & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE | CEC_ISR_TXUDR | CEC_ISR_TXERR | - CEC_ISR_TXACKE)) != 0U) + + /* Receive error */ + if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RERR) != RESET) + { + /* Acknowledgement of the error */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RERR); + hcec->Init.RxBuffer-=hcec->RxXferSize; + hcec->RxXferSize = 0U; + hcec->RxState = HAL_CEC_STATE_READY; + } + + if((hcec->ErrorCode & CEC_ESR_ALL_ERROR) != 0U) { - hcec->ErrorCode = reg; - __HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR | HAL_CEC_ERROR_BRE | CEC_FLAG_LBPE | CEC_FLAG_SBPE | - HAL_CEC_ERROR_RXACKE | HAL_CEC_ERROR_TXUDR | HAL_CEC_ERROR_TXERR | HAL_CEC_ERROR_TXACKE); - - - if ((reg & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE)) != 0U) - { - hcec->Init.RxBuffer -= hcec->RxXferSize; - hcec->RxXferSize = 0U; - hcec->RxState = HAL_CEC_STATE_READY; - } - else if (((reg & CEC_ISR_ARBLST) == 0U) && ((reg & (CEC_ISR_TXUDR | CEC_ISR_TXERR | CEC_ISR_TXACKE)) != 0U)) - { - /* Set the CEC state ready to be able to start again the process */ - hcec->gState = HAL_CEC_STATE_READY; - } - else - { - /* Nothing todo*/ - } -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) - hcec->ErrorCallback(hcec); -#else /* Error Call Back */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + hcec->ErrorCallback(hcec); +#else HAL_CEC_ErrorCallback(hcec); #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ } - else + + /* Transmit byte request or block transfer finished */ + if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TBTRF) != RESET) { - /* Nothing todo*/ + CEC_Transmit_IT(hcec); + } + + /* Receive byte or block transfer finished */ + if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RBTF) != RESET) + { + if(hcec->RxXferSize == 0U) + { + /* reception is starting */ + hcec->RxState = HAL_CEC_STATE_BUSY_RX; + } + CEC_Receive_IT(hcec); } } + /** * @brief Tx Transfer completed callback - * @param hcec CEC handle + * @param hcec: CEC handle * @retval None */ -__weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec) + __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec) { /* Prevent unused argument(s) compilation warning */ UNUSED(hcec); /* NOTE : This function should not be modified, when the callback is needed, the HAL_CEC_TxCpltCallback can be implemented in the user file - */ + */ } /** * @brief Rx Transfer completed callback - * @param hcec CEC handle - * @param RxFrameSize Size of frame + * @param hcec: CEC handle + * @param RxFrameSize: Size of frame * @retval None */ __weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize) @@ -922,56 +817,56 @@ __weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize /** * @brief CEC error callbacks - * @param hcec CEC handle + * @param hcec: CEC handle * @retval None */ -__weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec) + __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec) { /* Prevent unused argument(s) compilation warning */ UNUSED(hcec); /* NOTE : This function should not be modified, when the callback is needed, the HAL_CEC_ErrorCallback can be implemented in the user file - */ + */ } /** * @} */ -/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function - * @brief CEC control functions +/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions + * @brief CEC control functions * -@verbatim +@verbatim =============================================================================== ##### Peripheral Control function ##### - =============================================================================== + =============================================================================== [..] This subsection provides a set of functions allowing to control the CEC. - (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral. - (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral. + (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral. + (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral. @endverbatim * @{ */ /** * @brief return the CEC state - * @param hcec pointer to a CEC_HandleTypeDef structure that contains + * @param hcec: pointer to a CEC_HandleTypeDef structure that contains * the configuration information for the specified CEC module. * @retval HAL state */ HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec) { - uint32_t temp1, temp2; + uint32_t temp1= 0x00U, temp2 = 0x00U; temp1 = hcec->gState; temp2 = hcec->RxState; - + return (HAL_CEC_StateTypeDef)(temp1 | temp2); } /** - * @brief Return the CEC error code - * @param hcec pointer to a CEC_HandleTypeDef structure that contains +* @brief Return the CEC error code +* @param hcec : pointer to a CEC_HandleTypeDef structure that contains * the configuration information for the specified CEC. - * @retval CEC Error Code - */ +* @retval CEC Error Code +*/ uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec) { return hcec->ErrorCode; @@ -984,13 +879,127 @@ uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec) /** * @} */ + +/** @addtogroup CEC_Private_Functions + * @{ + */ + + /** + * @brief Send data in interrupt mode + * @param hcec: CEC handle. + * Function called under interruption only, once + * interruptions have been enabled by HAL_CEC_Transmit_IT() + * @retval HAL status + */ +static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec) +{ + /* if the IP is already busy or if there is a previous transmission + already pending due to arbitration loss */ + if((hcec->gState == HAL_CEC_STATE_BUSY_TX) || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET)) + { + /* if all data have been sent */ + if(hcec->TxXferCount == 0U) + { + /* Acknowledge successful completion by writing 0x00 */ + MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, 0x00U); + + hcec->gState = HAL_CEC_STATE_READY; +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + hcec->TxCpltCallback(hcec); +#else + HAL_CEC_TxCpltCallback(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + + return HAL_OK; + } + else + { + /* Reduce the number of bytes to transfer by one */ + hcec->TxXferCount--; + + /* Write data to TX buffer*/ + hcec->Instance->TXD = *hcec->pTxBuffPtr++; + + /* If this is the last byte of the ongoing transmission */ + if(hcec->TxXferCount == 0U) + { + /* Acknowledge byte request and signal end of message */ + MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, CEC_FLAG_TEOM); + } + else + { + /* Acknowledge byte request by writing 0x00 */ + MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, 0x00U); + } + + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive data in interrupt mode. + * @param hcec: CEC handle. + * Function called under interruption only, once + * interruptions have been enabled by HAL_CEC_Receive_IT() + * @retval HAL status + */ +static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec) +{ + static uint32_t temp; + + if(hcec->RxState == HAL_CEC_STATE_BUSY_RX) + { + temp = hcec->Instance->CSR; + + /* Store received data */ + hcec->RxXferSize++; + *hcec->Init.RxBuffer++ = hcec->Instance->RXD; + + /* Acknowledge received byte by writing 0x00 */ + MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_RECEIVE_MASK, 0x00U); + + /* If the End Of Message is reached */ + if(HAL_IS_BIT_SET(temp, CEC_FLAG_REOM)) + { + /* Interrupts are not disabled due to transmission still ongoing */ + hcec->RxState = HAL_CEC_STATE_READY; +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + hcec->RxCpltCallback(hcec, hcec->RxXferSize); +#else + HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + #endif /* CEC */ + #endif /* HAL_CEC_MODULE_ENABLED */ /** * @} */ -/** - * @} - */ - +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c similarity index 87% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c index 98515c5..e66ccee 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_cortex.c + * @file stm32f1xx_hal_cortex.c * @author MCD Application Team * @brief CORTEX HAL module driver. * This file provides firmware functions to manage the following @@ -18,7 +18,7 @@ =========================================================== [..] This section provides functions allowing to configure the NVIC interrupts (IRQ). - The Cortex-M4 exceptions are managed by CMSIS functions. + The Cortex-M3 exceptions are managed by CMSIS functions. (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function according to the following table. @@ -40,7 +40,7 @@ [..] Setup SysTick Timer for time base. - (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which is a CMSIS function that: (++) Configures the SysTick Reload register with value passed as function parameter. (++) Configures the SysTick IRQ priority to the lowest value 0x0F. @@ -52,7 +52,7 @@ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined - inside the stm32f4xx_hal_cortex.h file. + inside the stm32f1xx_hal_cortex.h file. (+) You can change the SysTick IRQ priority by calling the HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function @@ -68,19 +68,21 @@ ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -104,8 +106,8 @@ /** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * + * @brief Initialization and Configuration functions + * @verbatim ============================================================================== ##### Initialization and de-initialization functions ##### @@ -122,7 +124,7 @@ /** * @brief Sets the priority grouping field (preemption priority and subpriority) * using the required unlock sequence. - * @param PriorityGroup The priority grouping bits length. + * @param PriorityGroup: The priority grouping bits length. * This parameter can be one of the following values: * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority * 4 bits for subpriority @@ -149,13 +151,13 @@ void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) /** * @brief Sets the priority of an interrupt. - * @param IRQn External interrupt number. + * @param IRQn: External interrupt number. * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @param PreemptPriority The preemption priority for the IRQn channel. + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xx.h)) + * @param PreemptPriority: The preemption priority for the IRQn channel. * This parameter can be a value between 0 and 15 * A lower priority value indicates a higher priority - * @param SubPriority the subpriority level for the IRQ channel. + * @param SubPriority: the subpriority level for the IRQ channel. * This parameter can be a value between 0 and 15 * A lower priority value indicates a higher priority. * @retval None @@ -179,14 +181,14 @@ void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t Sub * function should be called before. * @param IRQn External interrupt number. * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) * @retval None */ void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) { /* Check the parameters */ assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - + /* Enable interrupt */ NVIC_EnableIRQ(IRQn); } @@ -195,14 +197,14 @@ void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) * @brief Disables a device specific interrupt in the NVIC interrupt controller. * @param IRQn External interrupt number. * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) * @retval None */ void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) { /* Check the parameters */ assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - + /* Disable interrupt */ NVIC_DisableIRQ(IRQn); } @@ -220,7 +222,7 @@ void HAL_NVIC_SystemReset(void) /** * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. * Counter is in free running mode to generate periodic interrupts. - * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. * @retval status: - 0 Function succeeded. * - 1 Function failed. */ @@ -233,12 +235,12 @@ uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) */ /** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions - * @brief Cortex control functions - * + * @brief Cortex control functions + * @verbatim ============================================================================== ##### Peripheral Control functions ##### - ============================================================================== + ============================================================================== [..] This subsection provides a set of functions allowing to control the CORTEX (NVIC, SYSTICK, MPU) functionalities. @@ -267,7 +269,7 @@ void HAL_MPU_Disable(void) /** * @brief Enable the MPU. - * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * @param MPU_Control: Specifies the control mode of the MPU during hard fault, * NMI, FAULTMASK and privileged access to the default memory * This parameter can be one of the following values: * @arg MPU_HFNMI_PRIVDEF_NONE @@ -291,7 +293,7 @@ void HAL_MPU_Enable(uint32_t MPU_Control) /** * @brief Initializes and configures the Region and the memory to be protected. - * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains * the initialization and configuration information. * @retval None */ @@ -347,10 +349,10 @@ uint32_t HAL_NVIC_GetPriorityGrouping(void) /** * @brief Gets the priority of an interrupt. - * @param IRQn External interrupt number. + * @param IRQn: External interrupt number. * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @param PriorityGroup the priority grouping bits length. + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @param PriorityGroup: the priority grouping bits length. * This parameter can be one of the following values: * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority * 4 bits for subpriority @@ -362,8 +364,8 @@ uint32_t HAL_NVIC_GetPriorityGrouping(void) * 1 bits for subpriority * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority * 0 bits for subpriority - * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). - * @param pSubPriority Pointer on the Subpriority value (starting from 0). + * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority: Pointer on the Subpriority value (starting from 0). * @retval None */ void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) @@ -378,7 +380,7 @@ void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPre * @brief Sets Pending bit of an external interrupt. * @param IRQn External interrupt number * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) * @retval None */ void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) @@ -394,8 +396,8 @@ void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) * @brief Gets Pending Interrupt (reads the pending register in the NVIC * and returns the pending bit for the specified interrupt). * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) * @retval status: - 0 Interrupt status is not pending. * - 1 Interrupt status is pending. */ @@ -403,7 +405,7 @@ uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) { /* Check the parameters */ assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - + /* Return 1 if pending else 0 */ return NVIC_GetPendingIRQ(IRQn); } @@ -412,14 +414,14 @@ uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) * @brief Clears the pending bit of an external interrupt. * @param IRQn External interrupt number. * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) * @retval None */ void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) { /* Check the parameters */ assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - + /* Clear pending interrupt */ NVIC_ClearPendingIRQ(IRQn); } @@ -428,7 +430,7 @@ void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). * @param IRQn External interrupt number * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) * @retval status: - 0 Interrupt status is not pending. * - 1 Interrupt status is pending. */ @@ -436,15 +438,15 @@ uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) { /* Check the parameters */ assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - + /* Return 1 if active else 0 */ return NVIC_GetActive(IRQn); } /** * @brief Configures the SysTick clock source. - * @param CLKSource specifies the SysTick clock source. - * This parameter can be one of the following values: + * @param CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. * @retval None @@ -500,3 +502,4 @@ __weak void HAL_SYSTICK_Callback(void) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_crc.c similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_crc.c index 2e86b2b..2fa6775 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_crc.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_crc.c + * @file stm32f1xx_hal_crc.c * @author MCD Application Team * @brief CRC HAL module driver. * This file provides firmware functions to manage the following @@ -9,17 +9,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim =============================================================================== ##### How to use this driver ##### @@ -40,12 +29,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -326,3 +326,5 @@ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac.c similarity index 92% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac.c index 9023e3e..065abb6 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_dac.c + * @file stm32f1xx_hal_dac.c * @author MCD Application Team * @brief DAC HAL module driver. * This file provides firmware functions to manage the following @@ -11,17 +11,6 @@ * + Peripheral State and Errors functions * * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### DAC Peripheral features ##### @@ -30,12 +19,14 @@ *** DAC Channels *** ==================== [..] - STM32F4 devices integrate two 12-bit Digital Analog Converters + STM32F1 devices integrate two 12-bit Digital Analog Converters The 2 converters (i.e. channel1 & channel2) can be used independently or simultaneously (dual mode): - (#) DAC channel1 with DAC_OUT1 (PA4) as output - (#) DAC channel2 with DAC_OUT2 (PA5) as output + (#) DAC channel1 with DAC_OUT1 (PA4) as output or connected to on-chip + peripherals (ex. timers). + (#) DAC channel2 with DAC_OUT2 (PA5) as output or connected to on-chip + peripherals (ex. timers). *** DAC Triggers *** ==================== @@ -47,7 +38,11 @@ (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9. The used pin (GPIOx_PIN_9) must be configured in input mode. - (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8 + (#) Timers TRGO: TIM2, TIM4, TIM6, TIM7 + For STM32F10x connectivity line devices and STM32F100x devices: TIM3 + For STM32F10x high-density and XL-density devices: TIM8 + For STM32F100x high-density value line devices: TIM15 as + replacement of TIM5. (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...) (#) Software using DAC_TRIGGER_SOFTWARE @@ -64,6 +59,17 @@ (@) Refer to the device datasheet for more details about output impedance value with and without output buffer. + *** GPIO configurations guidelines *** + ===================== + [..] + When a DAC channel is used (ex channel1 on PA4) and the other is not + (ex channel2 on PA5 is configured in Analog and disabled). + Channel1 may disturb channel2 as coupling effect. + Note that there is no coupling on channel2 as soon as channel2 is turned on. + Coupling on adjacent channel could be avoided as follows: + when unused PA5 is configured as INPUT PULL-UP or DOWN. + PA5 is configured in ANALOG just before it is turned on. + *** DAC wave generation feature *** =================================== [..] @@ -99,10 +105,12 @@ A DMA request can be generated when an external trigger (but not a software trigger) occurs if DMA1 requests are enabled using HAL_DAC_Start_DMA(). DMA1 requests are mapped as following: - (#) DAC channel1 mapped on DMA1 Stream5 channel7 which must be - already configured - (#) DAC channel2 mapped on DMA1 Stream6 channel7 which must be - already configured + (#) DAC channel1 mapped on DMA1 channel3 + for STM32F100x low-density, medium-density, high-density with DAC + DMA remap: + (#) DAC channel2 mapped on DMA2 channel3 + for STM32F100x high-density without DAC DMA remap and other + STM32F1 devices [..] (@) For Dual mode and specific signal (Triangle and noise) generation please @@ -139,7 +147,8 @@ HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 - (+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. + (+) For STM32F100x devices with specific feature: DMA underrun. + In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() function is executed and user can add his own code by customization of function pointer HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and @@ -152,7 +161,7 @@ The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_DAC_RegisterCallback() to register a user callback, + Use Functions @ref HAL_DAC_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. @@ -167,7 +176,7 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_DAC_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_DAC_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. @@ -182,12 +191,12 @@ (+) All Callbacks This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET + By default, after the @ref HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_DAC_Init - and HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_DAC_Init and HAL_DAC_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_DAC_Init + and @ref HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_DAC_Init and @ref HAL_DAC_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -195,8 +204,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_DAC_RegisterCallback before calling HAL_DAC_DeInit - or HAL_DAC_Init function. + using @ref HAL_DAC_RegisterCallback before calling @ref HAL_DAC_DeInit + or @ref HAL_DAC_Init function. When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -207,22 +216,33 @@ [..] Below the list of most used macros in DAC HAL driver. - (+) __HAL_DAC_ENABLE : Enable the DAC peripheral - (+) __HAL_DAC_DISABLE : Disable the DAC peripheral - (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags - (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status + (+) __HAL_DAC_ENABLE : Enable the DAC peripheral (For STM32F100x devices with specific feature: DMA underrun) + (+) __HAL_DAC_DISABLE : Disable the DAC peripheral (For STM32F100x devices with specific feature: DMA underrun) + (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags (For STM32F100x devices with specific feature: DMA underrun) + (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status (For STM32F100x devices with specific feature: DMA underrun) [..] (@) You can refer to the DAC HAL driver header file for more useful macros @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -286,12 +306,12 @@ HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac) hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; -#if defined(DAC_CHANNEL2_SUPPORT) + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; -#endif /* DAC_CHANNEL2_SUPPORT */ + if (hdac->MspInitCallback == NULL) { hdac->MspInitCallback = HAL_DAC_MspInit; @@ -455,7 +475,7 @@ HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1); } } -#if defined(DAC_CHANNEL2_SUPPORT) + else { /* Check if software trigger enabled */ @@ -465,7 +485,7 @@ HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2); } } -#endif /* DAC_CHANNEL2_SUPPORT */ + /* Change DAC state */ hdac->State = HAL_DAC_STATE_READY; @@ -522,7 +542,7 @@ HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel) HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, uint32_t Alignment) { - HAL_StatusTypeDef status = HAL_OK; + HAL_StatusTypeDef status; uint32_t tmpreg = 0U; /* Check the parameters */ @@ -568,7 +588,7 @@ HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, u break; } } -#if defined(DAC_CHANNEL2_SUPPORT) + else { /* Set the DMA transfer complete callback for channel2 */ @@ -602,27 +622,31 @@ HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, u break; } } -#endif /* DAC_CHANNEL2_SUPPORT */ + /* Enable the DMA Stream */ if (Channel == DAC_CHANNEL_1) { +#if defined(DAC_CR_DMAUDRIE1) /* Enable the DAC DMA underrun interrupt */ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1); +#endif /* DAC_CR_DMAUDRIE1 */ /* Enable the DMA Stream */ status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); } -#if defined(DAC_CHANNEL2_SUPPORT) + else { +#if defined(DAC_CR_DMAUDRIE2) /* Enable the DAC DMA underrun interrupt */ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2); +#endif /* DAC_CR_DMAUDRIE2 */ /* Enable the DMA Stream */ status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length); } -#endif /* DAC_CHANNEL2_SUPPORT */ + /* Process Unlocked */ __HAL_UNLOCK(hdac); @@ -669,20 +693,22 @@ HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) { /* Disable the DMA Stream */ (void)HAL_DMA_Abort(hdac->DMA_Handle1); - +#if defined(DAC_CR_DMAUDRIE1) /* Disable the DAC DMA underrun interrupt */ __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1); +#endif /* DAC_CR_DMAUDRIE1 */ } -#if defined(DAC_CHANNEL2_SUPPORT) + else /* Channel2 is used for */ { /* Disable the DMA Stream */ (void)HAL_DMA_Abort(hdac->DMA_Handle2); - +#if defined(DAC_CR_DMAUDRIE2) /* Disable the DAC DMA underrun interrupt */ __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2); +#endif /* DAC_CR_DMAUDRIE2 */ } -#endif /* DAC_CHANNEL2_SUPPORT */ + /* Change DAC state */ hdac->State = HAL_DAC_STATE_READY; @@ -701,6 +727,11 @@ HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) */ void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) { +#if !defined(DAC_SR_DMAUDR1) && !defined(DAC_SR_DMAUDR2) + UNUSED(hdac); +#endif + +#if defined(DAC_SR_DMAUDR1) if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1)) { /* Check underrun flag of DAC channel 1 */ @@ -726,8 +757,9 @@ void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ } } +#endif /* DAC_SR_DMAUDR1 */ -#if defined(DAC_CHANNEL2_SUPPORT) +#if defined(DAC_SR_DMAUDR2) if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2)) { /* Check underrun flag of DAC channel 2 */ @@ -753,7 +785,7 @@ void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ } } -#endif /* DAC_CHANNEL2_SUPPORT */ +#endif /* DAC_SR_DMAUDR2 */ } /** @@ -786,12 +818,12 @@ HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, ui { tmp += DAC_DHR12R1_ALIGNMENT(Alignment); } -#if defined(DAC_CHANNEL2_SUPPORT) + else { tmp += DAC_DHR12R2_ALIGNMENT(Alignment); } -#endif /* DAC_CHANNEL2_SUPPORT */ + /* Set the DAC channel selected data holding register */ *(__IO uint32_t *) tmp = Data; @@ -895,7 +927,7 @@ __weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) */ uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel) { - uint32_t result = 0; + uint32_t result; /* Check the parameters */ assert_param(IS_DAC_CHANNEL(Channel)); @@ -904,12 +936,12 @@ uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel) { result = hdac->Instance->DOR1; } -#if defined(DAC_CHANNEL2_SUPPORT) + else { result = hdac->Instance->DOR2; } -#endif /* DAC_CHANNEL2_SUPPORT */ + /* Returns the DAC channel data output register value */ return result; } @@ -1078,7 +1110,7 @@ HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_Call case HAL_DAC_CH1_UNDERRUN_CB_ID : hdac->DMAUnderrunCallbackCh1 = pCallback; break; -#if defined(DAC_CHANNEL2_SUPPORT) + case HAL_DAC_CH2_COMPLETE_CB_ID : hdac->ConvCpltCallbackCh2 = pCallback; break; @@ -1091,7 +1123,7 @@ HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_Call case HAL_DAC_CH2_UNDERRUN_CB_ID : hdac->DMAUnderrunCallbackCh2 = pCallback; break; -#endif /* DAC_CHANNEL2_SUPPORT */ + case HAL_DAC_MSPINIT_CB_ID : hdac->MspInitCallback = pCallback; break; @@ -1179,7 +1211,7 @@ HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_Ca case HAL_DAC_CH1_UNDERRUN_CB_ID : hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; break; -#if defined(DAC_CHANNEL2_SUPPORT) + case HAL_DAC_CH2_COMPLETE_CB_ID : hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; break; @@ -1192,7 +1224,7 @@ HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_Ca case HAL_DAC_CH2_UNDERRUN_CB_ID : hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; break; -#endif /* DAC_CHANNEL2_SUPPORT */ + case HAL_DAC_MSPINIT_CB_ID : hdac->MspInitCallback = HAL_DAC_MspInit; break; @@ -1204,12 +1236,12 @@ HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_Ca hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; -#if defined(DAC_CHANNEL2_SUPPORT) + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; -#endif /* DAC_CHANNEL2_SUPPORT */ + hdac->MspInitCallback = HAL_DAC_MspInit; hdac->MspDeInitCallback = HAL_DAC_MspDeInit; break; @@ -1339,3 +1371,4 @@ void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac_ex.c similarity index 95% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac_ex.c index 343dd98..96421a7 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dac_ex.c @@ -1,23 +1,12 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_dac_ex.c + * @file stm32f1xx_hal_dac_ex.c * @author MCD Application Team * @brief Extended DAC HAL module driver. * This file provides firmware functions to manage the extended * functionalities of the DAC peripheral. * * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -39,14 +28,25 @@ (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -89,7 +89,7 @@ * @{ */ -#if defined(DAC_CHANNEL2_SUPPORT) + /** * @brief Enables DAC and starts conversion of both channels. * @param hdac pointer to a DAC_HandleTypeDef structure that contains @@ -152,7 +152,7 @@ HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac) /* Return function status */ return HAL_OK; } -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @brief Enable or disable the selected DAC channel wave generation. @@ -254,7 +254,7 @@ HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t return HAL_OK; } -#if defined(DAC_CHANNEL2_SUPPORT) + /** * @brief Set the specified data holding register value for dual DAC channel. * @param hdac pointer to a DAC_HandleTypeDef structure that contains @@ -363,7 +363,7 @@ __weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file */ } -#endif /* DAC_CHANNEL2_SUPPORT */ + /** @@ -384,7 +384,7 @@ __weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) * @{ */ -#if defined(DAC_CHANNEL2_SUPPORT) + /** * @brief Return the last data output value of the selected DAC channel. * @param hdac pointer to a DAC_HandleTypeDef structure that contains @@ -402,7 +402,7 @@ uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac) /* Returns the DAC channel data output register value */ return tmp; } -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} @@ -417,7 +417,7 @@ uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac) * @{ */ -#if defined(DAC_CHANNEL2_SUPPORT) + /** * @brief DMA conversion complete callback. * @param hdma pointer to a DMA_HandleTypeDef structure that contains @@ -475,7 +475,7 @@ void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) hdac->State = HAL_DAC_STATE_READY; } -#endif /* DAC_CHANNEL2_SUPPORT */ + /** * @} @@ -493,3 +493,4 @@ void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c new file mode 100644 index 0000000..62a1d28 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c @@ -0,0 +1,899 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e. a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp = 0U; + + /* Check the DMA handle allocation */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->DmaBaseAddress = DMA2; + } +#else + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; +#endif /* DMA2 */ + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Reset DMA Channel Number of Data to Transfer register */ + hdma->Instance->CNDTR = 0U; + + /* Reset DMA Channel peripheral address register */ + hdma->Instance->CPAR = 0U; + + /* Reset DMA Channel memory address register */ + hdma->Instance->CMAR = 0U; + +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->DmaBaseAddress = DMA2; + } +#else + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; +#endif /* DMA2 */ + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex)); + + /* Clean all callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Reset the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Reset the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if(NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + } + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_GI_FLAG_INDEX(hdma)); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel: Specifies the DMA level complete. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart = 0U; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma); + } + else + { + /* Half Transfer Complete flag */ + temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET) + { + if((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Update error code */ + SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE); + + /* Change the DMA state */ + hdma->State= HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + /* Update error code */ + SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handles DMA interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex)) != RESET) && ((source_it & DMA_IT_HT) != RESET)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if (((flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex)) != RESET) && ((source_it & DMA_IT_TC) != RESET)) + { + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + return; +} + +/** + * @brief Register callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID: User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback: pointer to private callbacsk function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID: User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA hande state. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_eth.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_eth.c new file mode 100644 index 0000000..b6d0a9a --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_eth.c @@ -0,0 +1,2292 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_eth.c + * @author MCD Application Team + * @brief ETH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Ethernet (ETH) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#)Declare a ETH_HandleTypeDef handle structure, for example: + ETH_HandleTypeDef heth; + + (#)Fill parameters of Init structure in heth handle + + (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) + + (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API: + (##) Enable the Ethernet interface clock using + (+++) __HAL_RCC_ETHMAC_CLK_ENABLE(); + (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE(); + (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE(); + + (##) Initialize the related GPIO clocks + (##) Configure Ethernet pin-out + (##) Configure Ethernet NVIC interrupt (IT mode) + + (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers: + (##) HAL_ETH_DMATxDescListInit(); for Transmission process + (##) HAL_ETH_DMARxDescListInit(); for Reception process + + (#)Enable MAC and DMA transmission and reception: + (##) HAL_ETH_Start(); + + (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer + the frame to MAC TX FIFO: + (##) HAL_ETH_TransmitFrame(); + + (#)Poll for a received frame in ETH RX DMA Descriptors and get received + frame parameters + (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop) + + (#) Get a received frame when an ETH RX interrupt occurs: + (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only) + + (#) Communicate with external PHY device: + (##) Read a specific register from the PHY + HAL_ETH_ReadPHYRegister(); + (##) Write data to a specific RHY register: + HAL_ETH_WritePHYRegister(); + + (#) Configure the Ethernet MAC after ETH peripheral initialization + HAL_ETH_ConfigMAC(); all MAC parameters should be filled. + + (#) Configure the Ethernet DMA after ETH peripheral initialization + HAL_ETH_ConfigDMA(); all DMA parameters should be filled. + + -@- The PTP protocol and the DMA descriptors ring mode are not supported + in this driver +*** Callback registration *** + ============================================= + + The compilation define USE_HAL_ETH_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_ETH_RegisterCallback() to register an interrupt callback. + + Function @ref HAL_ETH_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) DMAErrorCallback : DMA Error Callback. + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_ETH_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_ETH_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) DMAErrorCallback : DMA Error Callback. + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + By default, after the HAL_ETH_Init and when the state is HAL_ETH_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ETH_TxCpltCallback(), @ref HAL_ETH_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_ETH_Init/ @ref HAL_ETH_DeInit only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_ETH_Init/ @ref HAL_ETH_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_ETH_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_ETH_STATE_READY or HAL_ETH_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_ETH_RegisterCallback() before calling @ref HAL_ETH_DeInit + or HAL_ETH_Init function. + + When The compilation define USE_HAL_ETH_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup ETH ETH + * @brief ETH HAL module driver + * @{ + */ + +#ifdef HAL_ETH_MODULE_ENABLED + +#if defined (ETH) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ETH_Private_Constants ETH Private Constants + * @{ + */ +#define ETH_TIMEOUT_SWRESET 500U +#define ETH_TIMEOUT_LINKED_STATE 5000U +#define ETH_TIMEOUT_AUTONEGO_COMPLETED 5000U + +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ETH_Private_Functions ETH Private Functions + * @{ + */ +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err); +static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr); +static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth); +static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth); +static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth); +static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth); +static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth); +static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth); +static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth); +static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth); +static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth); +static void ETH_Delay(uint32_t mdelay); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup ETH_Exported_Functions ETH Exported Functions + * @{ + */ + +/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the Ethernet peripheral + (+) De-initialize the Ethernet peripheral + + @endverbatim + * @{ + */ + +/** + * @brief Initializes the Ethernet MAC and DMA according to default + * parameters. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth) +{ + uint32_t tmpreg1 = 0U, phyreg = 0U; + uint32_t hclk = 60000000U; + uint32_t tickstart = 0U; + uint32_t err = ETH_SUCCESS; + + /* Check the ETH peripheral state */ + if (heth == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation)); + assert_param(IS_ETH_RX_MODE(heth->Init.RxMode)); + assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode)); + assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface)); + + if (heth->State == HAL_ETH_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + heth->Lock = HAL_UNLOCKED; +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + ETH_InitCallbacksToDefault(heth); + + if (heth->MspInitCallback == NULL) + { + /* Init the low level hardware : GPIO, CLOCK, NVIC. */ + heth->MspInitCallback = HAL_ETH_MspInit; + } + heth->MspInitCallback(heth); + +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspInit(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* Select MII or RMII Mode*/ + AFIO->MAPR &= ~(AFIO_MAPR_MII_RMII_SEL); + AFIO->MAPR |= (uint32_t)heth->Init.MediaInterface; + + /* Ethernet Software reset */ + /* Set the SWR bit: resets all MAC subsystem internal registers and logic */ + /* After reset all the registers holds their respective reset values */ + (heth->Instance)->DMABMR |= ETH_DMABMR_SR; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for software reset */ + while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > ETH_TIMEOUT_SWRESET) + { + heth->State = HAL_ETH_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Note: The SWR is not performed if the ETH_RX_CLK or the ETH_TX_CLK are + not available, please check your external PHY or the IO configuration */ + return HAL_TIMEOUT; + } + } + + /*-------------------------------- MAC Initialization ----------------------*/ + /* Get the ETHERNET MACMIIAR value */ + tmpreg1 = (heth->Instance)->MACMIIAR; + /* Clear CSR Clock Range CR[2:0] bits */ + tmpreg1 &= ETH_MACMIIAR_CR_MASK; + + /* Get hclk frequency value */ + hclk = HAL_RCC_GetHCLKFreq(); + + /* Set CR bits depending on hclk value */ + if ((hclk >= 20000000U) && (hclk < 35000000U)) + { + /* CSR Clock Range between 20-35 MHz */ + tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_DIV16; + } + else if ((hclk >= 35000000U) && (hclk < 60000000U)) + { + /* CSR Clock Range between 35-60 MHz */ + tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_DIV26; + } + else + { + /* CSR Clock Range between 60-72 MHz */ + tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_DIV42; + } + + /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */ + (heth->Instance)->MACMIIAR = (uint32_t)tmpreg1; + + /*-------------------- PHY initialization and configuration ----------------*/ + /* Put the PHY in reset mode */ + if ((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK) + { + /* In case of write timeout */ + err = ETH_ERROR; + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + /* Set the ETH peripheral state to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Return HAL_ERROR */ + return HAL_ERROR; + } + + /* Delay to assure PHY reset */ + HAL_Delay(PHY_RESET_DELAY); + + if ((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* We wait for linked status */ + do + { + HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg); + + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > ETH_TIMEOUT_LINKED_STATE) + { + /* In case of write timeout */ + err = ETH_ERROR; + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + return HAL_TIMEOUT; + } + } + while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS)); + + + /* Enable Auto-Negotiation */ + if ((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK) + { + /* In case of write timeout */ + err = ETH_ERROR; + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + /* Set the ETH peripheral state to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Return HAL_ERROR */ + return HAL_ERROR; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the auto-negotiation will be completed */ + do + { + HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg); + + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > ETH_TIMEOUT_AUTONEGO_COMPLETED) + { + /* In case of write timeout */ + err = ETH_ERROR; + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + return HAL_TIMEOUT; + } + + } + while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE)); + + /* Read the result of the auto-negotiation */ + if ((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK) + { + /* In case of write timeout */ + err = ETH_ERROR; + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + /* Set the ETH peripheral state to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Return HAL_ERROR */ + return HAL_ERROR; + } + + /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */ + if ((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET) + { + /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */ + (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX; + } + else + { + /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */ + (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX; + } + /* Configure the MAC with the speed fixed by the auto-negotiation process */ + if ((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS) + { + /* Set Ethernet speed to 10M following the auto-negotiation */ + (heth->Init).Speed = ETH_SPEED_10M; + } + else + { + /* Set Ethernet speed to 100M following the auto-negotiation */ + (heth->Init).Speed = ETH_SPEED_100M; + } + } + else /* AutoNegotiation Disable */ + { + /* Check parameters */ + assert_param(IS_ETH_SPEED(heth->Init.Speed)); + assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode)); + + /* Set MAC Speed and Duplex Mode */ + if (HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3U) | + (uint16_t)((heth->Init).Speed >> 1U))) != HAL_OK) + { + /* In case of write timeout */ + err = ETH_ERROR; + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + /* Set the ETH peripheral state to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Return HAL_ERROR */ + return HAL_ERROR; + } + + /* Delay to assure PHY configuration */ + HAL_Delay(PHY_CONFIG_DELAY); + } + + /* Config MAC and DMA */ + ETH_MACDMAConfig(heth, err); + + /* Set ETH HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief De-Initializes the ETH peripheral. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth) +{ + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + if (heth->MspDeInitCallback == NULL) + { + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + } + /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ + heth->MspDeInitCallback(heth); +#else + /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspDeInit(heth); +#endif + + /* Set ETH HAL state to Disabled */ + heth->State = HAL_ETH_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the DMA Tx descriptors in chain mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param DMATxDescTab: Pointer to the first Tx desc list + * @param TxBuff: Pointer to the first TxBuffer list + * @param TxBuffCount: Number of the used Tx desc in the list + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount) +{ + uint32_t i = 0U; + ETH_DMADescTypeDef *dmatxdesc; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */ + heth->TxDesc = DMATxDescTab; + + /* Fill each DMATxDesc descriptor with the right values */ + for (i = 0U; i < TxBuffCount; i++) + { + /* Get the pointer on the ith member of the Tx Desc list */ + dmatxdesc = DMATxDescTab + i; + + /* Set Second Address Chained bit */ + dmatxdesc->Status = ETH_DMATXDESC_TCH; + + /* Set Buffer1 address pointer */ + dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i * ETH_TX_BUF_SIZE]); + + if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE) + { + /* Set the DMA Tx descriptors checksum insertion */ + dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL; + } + + /* Initialize the next descriptor with the Next Descriptor Polling Enable */ + if (i < (TxBuffCount - 1U)) + { + /* Set next descriptor address register with next descriptor base address */ + dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab + i + 1U); + } + else + { + /* For last descriptor, set next descriptor address register equal to the first descriptor base address */ + dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab; + } + } + + /* Set Transmit Descriptor List Address Register */ + (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab; + + /* Set ETH HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the DMA Rx descriptors in chain mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param DMARxDescTab: Pointer to the first Rx desc list + * @param RxBuff: Pointer to the first RxBuffer list + * @param RxBuffCount: Number of the used Rx desc in the list + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount) +{ + uint32_t i = 0U; + ETH_DMADescTypeDef *DMARxDesc; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */ + heth->RxDesc = DMARxDescTab; + + /* Fill each DMARxDesc descriptor with the right values */ + for (i = 0U; i < RxBuffCount; i++) + { + /* Get the pointer on the ith member of the Rx Desc list */ + DMARxDesc = DMARxDescTab + i; + + /* Set Own bit of the Rx descriptor Status */ + DMARxDesc->Status = ETH_DMARXDESC_OWN; + + /* Set Buffer1 size and Second Address Chained bit */ + DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE; + + /* Set Buffer1 address pointer */ + DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i * ETH_RX_BUF_SIZE]); + + if ((heth->Init).RxMode == ETH_RXINTERRUPT_MODE) + { + /* Enable Ethernet DMA Rx Descriptor interrupt */ + DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC; + } + + /* Initialize the next descriptor with the Next Descriptor Polling Enable */ + if (i < (RxBuffCount - 1U)) + { + /* Set next descriptor address register with next descriptor base address */ + DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab + i + 1U); + } + else + { + /* For last descriptor, set next descriptor address register equal to the first descriptor base address */ + DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab); + } + } + + /* Set Receive Descriptor List Address Register */ + (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab; + + /* Set ETH HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ETH Callback + * To be used instead of the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_DMA_ERROR_CB_ID DMA Error Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, pETH_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(heth); + + if (heth->State == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = pCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = pCallback; + break; + + case HAL_ETH_DMA_ERROR_CB_ID : + heth->DMAErrorCallback = pCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->State == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(heth); + + return status; +} + +/** + * @brief Unregister an ETH Callback + * ETH callabck is redirected to the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_DMA_ERROR_CB_ID DMA Error Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(heth); + + if (heth->State == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; + break; + + case HAL_ETH_DMA_ERROR_CB_ID : + heth->DMAErrorCallback = HAL_ETH_ErrorCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->State == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(heth); + + return status; +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * + @verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Transmit a frame + HAL_ETH_TransmitFrame(); + (+) Receive a frame + HAL_ETH_GetReceivedFrame(); + HAL_ETH_GetReceivedFrame_IT(); + (+) Read from an External PHY register + HAL_ETH_ReadPHYRegister(); + (+) Write to an External PHY register + HAL_ETH_WritePHYRegister(); + + @endverbatim + + * @{ + */ + +/** + * @brief Sends an Ethernet frame. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param FrameLength: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength) +{ + uint32_t bufcount = 0U, size = 0U, i = 0U; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + if (FrameLength == 0U) + { + /* Set ETH HAL state to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + return HAL_ERROR; + } + + /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */ + if (((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) + { + /* OWN bit set */ + heth->State = HAL_ETH_STATE_BUSY_TX; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + return HAL_ERROR; + } + + /* Get the number of needed Tx buffers for the current frame */ + if (FrameLength > ETH_TX_BUF_SIZE) + { + bufcount = FrameLength / ETH_TX_BUF_SIZE; + if (FrameLength % ETH_TX_BUF_SIZE) + { + bufcount++; + } + } + else + { + bufcount = 1U; + } + if (bufcount == 1U) + { + /* Set LAST and FIRST segment */ + heth->TxDesc->Status |= ETH_DMATXDESC_FS | ETH_DMATXDESC_LS; + /* Set frame size */ + heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1); + /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */ + heth->TxDesc->Status |= ETH_DMATXDESC_OWN; + /* Point to next descriptor */ + heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr); + } + else + { + for (i = 0U; i < bufcount; i++) + { + /* Clear FIRST and LAST segment bits */ + heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS); + + if (i == 0U) + { + /* Setting the first segment bit */ + heth->TxDesc->Status |= ETH_DMATXDESC_FS; + } + + /* Program size */ + heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1); + + if (i == (bufcount - 1U)) + { + /* Setting the last segment bit */ + heth->TxDesc->Status |= ETH_DMATXDESC_LS; + size = FrameLength - (bufcount - 1U) * ETH_TX_BUF_SIZE; + heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1); + } + + /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */ + heth->TxDesc->Status |= ETH_DMATXDESC_OWN; + /* point to next descriptor */ + heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr); + } + } + + /* When Tx Buffer unavailable flag is set: clear it and resume transmission */ + if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET) + { + /* Clear TBUS ETHERNET DMA flag */ + (heth->Instance)->DMASR = ETH_DMASR_TBUS; + /* Resume DMA transmission*/ + (heth->Instance)->DMATPDR = 0U; + } + + /* Set ETH HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Checks for received frames. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth) +{ + uint32_t framelength = 0U; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Check the ETH state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Check if segment is not owned by DMA */ + /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */ + if (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET)) + { + /* Check if last segment */ + if (((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) + { + /* increment segment count */ + (heth->RxFrameInfos).SegCount++; + + /* Check if last segment is first segment: one segment contains the frame */ + if ((heth->RxFrameInfos).SegCount == 1U) + { + (heth->RxFrameInfos).FSRxDesc = heth->RxDesc; + } + + heth->RxFrameInfos.LSRxDesc = heth->RxDesc; + + /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */ + framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U; + heth->RxFrameInfos.length = framelength; + + /* Get the address of the buffer start address */ + heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr; + /* point to next descriptor */ + heth->RxDesc = (ETH_DMADescTypeDef *)((heth->RxDesc)->Buffer2NextDescAddr); + + /* Set HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; + } + /* Check if first segment */ + else if ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) + { + (heth->RxFrameInfos).FSRxDesc = heth->RxDesc; + (heth->RxFrameInfos).LSRxDesc = NULL; + (heth->RxFrameInfos).SegCount = 1U; + /* Point to next descriptor */ + heth->RxDesc = (ETH_DMADescTypeDef *)(heth->RxDesc->Buffer2NextDescAddr); + } + /* Check if intermediate segment */ + else + { + (heth->RxFrameInfos).SegCount++; + /* Point to next descriptor */ + heth->RxDesc = (ETH_DMADescTypeDef *)(heth->RxDesc->Buffer2NextDescAddr); + } + } + + /* Set ETH HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_ERROR; +} + +/** + * @brief Gets the Received frame in interrupt mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth) +{ + uint32_t descriptorscancounter = 0U; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set ETH HAL State to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Scan descriptors owned by CPU */ + while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB)) + { + /* Just for security */ + descriptorscancounter++; + + /* Check if first segment in frame */ + /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */ + if ((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS) + { + heth->RxFrameInfos.FSRxDesc = heth->RxDesc; + heth->RxFrameInfos.SegCount = 1U; + /* Point to next descriptor */ + heth->RxDesc = (ETH_DMADescTypeDef *)(heth->RxDesc->Buffer2NextDescAddr); + } + /* Check if intermediate segment */ + /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */ + else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET) + { + /* Increment segment count */ + (heth->RxFrameInfos.SegCount)++; + /* Point to next descriptor */ + heth->RxDesc = (ETH_DMADescTypeDef *)(heth->RxDesc->Buffer2NextDescAddr); + } + /* Should be last segment */ + else + { + /* Last segment */ + heth->RxFrameInfos.LSRxDesc = heth->RxDesc; + + /* Increment segment count */ + (heth->RxFrameInfos.SegCount)++; + + /* Check if last segment is first segment: one segment contains the frame */ + if ((heth->RxFrameInfos.SegCount) == 1U) + { + heth->RxFrameInfos.FSRxDesc = heth->RxDesc; + } + + /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */ + heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U; + + /* Get the address of the buffer start address */ + heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr; + + /* Point to next descriptor */ + heth->RxDesc = (ETH_DMADescTypeDef *)(heth->RxDesc->Buffer2NextDescAddr); + + /* Set HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; + } + } + + /* Set HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_ERROR; +} + +/** + * @brief This function handles ETH interrupt request. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth) +{ + /* Frame received */ + if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R)) + { +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Receive complete callback*/ + heth->RxCpltCallback(heth); +#else + /* Receive complete callback */ + HAL_ETH_RxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + /* Clear the Eth DMA Rx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R); + + /* Set HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + } + /* Frame transmitted */ + else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T)) + { +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call resgistered Transfer complete callback*/ + heth->TxCpltCallback(heth); +#else + /* Transfer complete callback */ + HAL_ETH_TxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + /* Clear the Eth DMA Tx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T); + + /* Set HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + } + + /* Clear the interrupt flags */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS); + + /* ETH DMA Error */ + if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS)) + { +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + heth->DMAErrorCallback(heth); +#else + /* Ethernet Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + /* Clear the interrupt flags */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS); + + /* Set HAL State to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + } +} + +/** + * @brief Tx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet transfer error callbacks + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Reads a PHY register + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYReg: PHY register address, is the index of one of the 32 PHY register. + * This parameter can be one of the following values: + * PHY_BCR: Transceiver Basic Control Register, + * PHY_BSR: Transceiver Basic Status Register. + * More PHY register could be read depending on the used PHY + * @param RegValue: PHY register value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue) +{ + uint32_t tmpreg1 = 0U; + uint32_t tickstart = 0U; + + /* Check parameters */ + assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress)); + + /* Check the ETH peripheral state */ + if (heth->State == HAL_ETH_STATE_BUSY_RD) + { + return HAL_BUSY; + } + /* Set ETH HAL State to BUSY_RD */ + heth->State = HAL_ETH_STATE_BUSY_RD; + + /* Get the ETHERNET MACMIIAR value */ + tmpreg1 = heth->Instance->MACMIIAR; + + /* Keep only the CSR Clock Range CR[2:0] bits value */ + tmpreg1 &= ~ETH_MACMIIAR_CR_MASK; + + /* Prepare the MII address register value */ + tmpreg1 |= (((uint32_t)heth->Init.PhyAddress << 11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */ + tmpreg1 |= (((uint32_t)PHYReg << 6U) & ETH_MACMIIAR_MR); /* Set the PHY register address */ + tmpreg1 &= ~ETH_MACMIIAR_MW; /* Set the read mode */ + tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */ + + /* Write the result value into the MII Address register */ + heth->Instance->MACMIIAR = tmpreg1; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check for the Busy flag */ + while ((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > PHY_READ_TO) + { + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + return HAL_TIMEOUT; + } + + tmpreg1 = heth->Instance->MACMIIAR; + } + + /* Get MACMIIDR value */ + *RegValue = (uint16_t)(heth->Instance->MACMIIDR); + + /* Set ETH HAL State to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Writes to a PHY register. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYReg: PHY register address, is the index of one of the 32 PHY register. + * This parameter can be one of the following values: + * PHY_BCR: Transceiver Control Register. + * More PHY register could be written depending on the used PHY + * @param RegValue: the value to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue) +{ + uint32_t tmpreg1 = 0U; + uint32_t tickstart = 0U; + + /* Check parameters */ + assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress)); + + /* Check the ETH peripheral state */ + if (heth->State == HAL_ETH_STATE_BUSY_WR) + { + return HAL_BUSY; + } + /* Set ETH HAL State to BUSY_WR */ + heth->State = HAL_ETH_STATE_BUSY_WR; + + /* Get the ETHERNET MACMIIAR value */ + tmpreg1 = heth->Instance->MACMIIAR; + + /* Keep only the CSR Clock Range CR[2:0] bits value */ + tmpreg1 &= ~ETH_MACMIIAR_CR_MASK; + + /* Prepare the MII register address value */ + tmpreg1 |= (((uint32_t)heth->Init.PhyAddress << 11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */ + tmpreg1 |= (((uint32_t)PHYReg << 6U) & ETH_MACMIIAR_MR); /* Set the PHY register address */ + tmpreg1 |= ETH_MACMIIAR_MW; /* Set the write mode */ + tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */ + + /* Give the value to the MII data register */ + heth->Instance->MACMIIDR = (uint16_t)RegValue; + + /* Write the result value into the MII Address register */ + heth->Instance->MACMIIAR = tmpreg1; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check for the Busy flag */ + while ((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > PHY_WRITE_TO) + { + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + return HAL_TIMEOUT; + } + + tmpreg1 = heth->Instance->MACMIIAR; + } + + /* Set ETH HAL State to READY */ + heth->State = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable MAC and DMA transmission and reception. + HAL_ETH_Start(); + (+) Disable MAC and DMA transmission and reception. + HAL_ETH_Stop(); + (+) Set the MAC configuration in runtime mode + HAL_ETH_ConfigMAC(); + (+) Set the DMA configuration in runtime mode + HAL_ETH_ConfigDMA(); + +@endverbatim + * @{ + */ + +/** + * @brief Enables Ethernet MAC and DMA reception/transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth) +{ + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Enable transmit state machine of the MAC for transmission on the MII */ + ETH_MACTransmissionEnable(heth); + + /* Enable receive state machine of the MAC for reception from the MII */ + ETH_MACReceptionEnable(heth); + + /* Flush Transmit FIFO */ + ETH_FlushTransmitFIFO(heth); + + /* Start DMA transmission */ + ETH_DMATransmissionEnable(heth); + + /* Start DMA reception */ + ETH_DMAReceptionEnable(heth); + + /* Set the ETH state to READY*/ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth) +{ + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Stop DMA transmission */ + ETH_DMATransmissionDisable(heth); + + /* Stop DMA reception */ + ETH_DMAReceptionDisable(heth); + + /* Disable receive state machine of the MAC for reception from the MII */ + ETH_MACReceptionDisable(heth); + + /* Flush Transmit FIFO */ + ETH_FlushTransmitFIFO(heth); + + /* Disable transmit state machine of the MAC for transmission on the MII */ + ETH_MACTransmissionDisable(heth); + + /* Set the ETH state*/ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set ETH MAC Configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: MAC Configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf) +{ + uint32_t tmpreg1 = 0U; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + assert_param(IS_ETH_SPEED(heth->Init.Speed)); + assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode)); + + if (macconf != NULL) + { + /* Check the parameters */ + assert_param(IS_ETH_WATCHDOG(macconf->Watchdog)); + assert_param(IS_ETH_JABBER(macconf->Jabber)); + assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap)); + assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense)); + assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn)); + assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode)); + assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload)); + assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission)); + assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip)); + assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit)); + assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck)); + assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll)); + assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter)); + assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames)); + assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception)); + assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter)); + assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode)); + assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter)); + assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter)); + assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime)); + assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause)); + assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold)); + assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect)); + assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl)); + assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl)); + assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison)); + assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier)); + + /*------------------------ ETHERNET MACCR Configuration --------------------*/ + /* Get the ETHERNET MACCR value */ + tmpreg1 = (heth->Instance)->MACCR; + /* Clear WD, PCE, PS, TE and RE bits */ + tmpreg1 &= ETH_MACCR_CLEAR_MASK; + + tmpreg1 |= (uint32_t)(macconf->Watchdog | + macconf->Jabber | + macconf->InterFrameGap | + macconf->CarrierSense | + (heth->Init).Speed | + macconf->ReceiveOwn | + macconf->LoopbackMode | + (heth->Init).DuplexMode | + macconf->ChecksumOffload | + macconf->RetryTransmission | + macconf->AutomaticPadCRCStrip | + macconf->BackOffLimit | + macconf->DeferralCheck); + + /* Write to ETHERNET MACCR */ + (heth->Instance)->MACCR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account : + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; + + /*----------------------- ETHERNET MACFFR Configuration --------------------*/ + /* Write to ETHERNET MACFFR */ + (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll | + macconf->SourceAddrFilter | + macconf->PassControlFrames | + macconf->BroadcastFramesReception | + macconf->DestinationAddrFilter | + macconf->PromiscuousMode | + macconf->MulticastFramesFilter | + macconf->UnicastFramesFilter); + + /* Wait until the write operation will be taken into account : + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACFFR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACFFR = tmpreg1; + + /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/ + /* Write to ETHERNET MACHTHR */ + (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh; + + /* Write to ETHERNET MACHTLR */ + (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow; + /*----------------------- ETHERNET MACFCR Configuration --------------------*/ + + /* Get the ETHERNET MACFCR value */ + tmpreg1 = (heth->Instance)->MACFCR; + /* Clear xx bits */ + tmpreg1 &= ETH_MACFCR_CLEAR_MASK; + + tmpreg1 |= (uint32_t)((macconf->PauseTime << 16U) | + macconf->ZeroQuantaPause | + macconf->PauseLowThreshold | + macconf->UnicastPauseFrameDetect | + macconf->ReceiveFlowControl | + macconf->TransmitFlowControl); + + /* Write to ETHERNET MACFCR */ + (heth->Instance)->MACFCR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account : + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACFCR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACFCR = tmpreg1; + + /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/ + (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison | + macconf->VLANTagIdentifier); + + /* Wait until the write operation will be taken into account : + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACVLANTR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACVLANTR = tmpreg1; + } + else /* macconf == NULL : here we just configure Speed and Duplex mode */ + { + /*------------------------ ETHERNET MACCR Configuration --------------------*/ + /* Get the ETHERNET MACCR value */ + tmpreg1 = (heth->Instance)->MACCR; + + /* Clear FES and DM bits */ + tmpreg1 &= ~(0x00004800U); + + tmpreg1 |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode); + + /* Write to ETHERNET MACCR */ + (heth->Instance)->MACCR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; + } + + /* Set the ETH state to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets ETH DMA Configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: DMA Configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf) +{ + uint32_t tmpreg1 = 0U; + + /* Process Locked */ + __HAL_LOCK(heth); + + /* Set the ETH peripheral state to BUSY */ + heth->State = HAL_ETH_STATE_BUSY; + + /* Check parameters */ + assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame)); + assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward)); + assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame)); + assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward)); + assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl)); + assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames)); + assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames)); + assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl)); + assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate)); + assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats)); + assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst)); + assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength)); + assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength)); + assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength)); + assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration)); + + /*----------------------- ETHERNET DMAOMR Configuration --------------------*/ + /* Get the ETHERNET DMAOMR value */ + tmpreg1 = (heth->Instance)->DMAOMR; + /* Clear xx bits */ + tmpreg1 &= ETH_DMAOMR_CLEAR_MASK; + + tmpreg1 |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame | + dmaconf->ReceiveStoreForward | + dmaconf->FlushReceivedFrame | + dmaconf->TransmitStoreForward | + dmaconf->TransmitThresholdControl | + dmaconf->ForwardErrorFrames | + dmaconf->ForwardUndersizedGoodFrames | + dmaconf->ReceiveThresholdControl | + dmaconf->SecondFrameOperate); + + /* Write to ETHERNET DMAOMR */ + (heth->Instance)->DMAOMR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->DMAOMR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->DMAOMR = tmpreg1; + + /*----------------------- ETHERNET DMABMR Configuration --------------------*/ + (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats | + dmaconf->FixedBurst | + dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */ + dmaconf->TxDMABurstLength | + (dmaconf->DescriptorSkipLength << 2U) | + dmaconf->DMAArbitration | + ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */ + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->DMABMR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->DMABMR = tmpreg1; + + /* Set the ETH state to Ready */ + heth->State = HAL_ETH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(heth); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * + @verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + (+) Get the ETH handle state: + HAL_ETH_GetState(); + + + @endverbatim + * @{ + */ + +/** + * @brief Return the ETH HAL state + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL state + */ +HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth) +{ + /* Return ETH state */ + return heth->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup ETH_Private_Functions + * @{ + */ + +/** + * @brief Configures Ethernet MAC and DMA with default parameters. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param err: Ethernet Init error + * @retval HAL status + */ +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err) +{ + ETH_MACInitTypeDef macinit; + ETH_DMAInitTypeDef dmainit; + uint32_t tmpreg1 = 0U; + + if (err != ETH_SUCCESS) /* Auto-negotiation failed */ + { + /* Set Ethernet duplex mode to Full-duplex */ + (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX; + + /* Set Ethernet speed to 100M */ + (heth->Init).Speed = ETH_SPEED_100M; + } + + /* Ethernet MAC default initialization **************************************/ + macinit.Watchdog = ETH_WATCHDOG_ENABLE; + macinit.Jabber = ETH_JABBER_ENABLE; + macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT; + macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE; + macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE; + macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE; + if (heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE) + { + macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE; + } + else + { + macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE; + } + macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE; + macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE; + macinit.BackOffLimit = ETH_BACKOFFLIMIT_10; + macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE; + macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE; + macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE; + macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL; + macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE; + macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL; + macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE; + macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT; + macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT; + macinit.HashTableHigh = 0x0U; + macinit.HashTableLow = 0x0U; + macinit.PauseTime = 0x0U; + macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE; + macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4; + macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE; + macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE; + macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE; + macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT; + macinit.VLANTagIdentifier = 0x0U; + + /*------------------------ ETHERNET MACCR Configuration --------------------*/ + /* Get the ETHERNET MACCR value */ + tmpreg1 = (heth->Instance)->MACCR; + /* Clear WD, PCE, PS, TE and RE bits */ + tmpreg1 &= ETH_MACCR_CLEAR_MASK; + /* Set the WD bit according to ETH Watchdog value */ + /* Set the JD: bit according to ETH Jabber value */ + /* Set the IFG bit according to ETH InterFrameGap value */ + /* Set the DCRS bit according to ETH CarrierSense value */ + /* Set the FES bit according to ETH Speed value */ + /* Set the DO bit according to ETH ReceiveOwn value */ + /* Set the LM bit according to ETH LoopbackMode value */ + /* Set the DM bit according to ETH Mode value */ + /* Set the IPCO bit according to ETH ChecksumOffload value */ + /* Set the DR bit according to ETH RetryTransmission value */ + /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */ + /* Set the BL bit according to ETH BackOffLimit value */ + /* Set the DC bit according to ETH DeferralCheck value */ + tmpreg1 |= (uint32_t)(macinit.Watchdog | + macinit.Jabber | + macinit.InterFrameGap | + macinit.CarrierSense | + (heth->Init).Speed | + macinit.ReceiveOwn | + macinit.LoopbackMode | + (heth->Init).DuplexMode | + macinit.ChecksumOffload | + macinit.RetryTransmission | + macinit.AutomaticPadCRCStrip | + macinit.BackOffLimit | + macinit.DeferralCheck); + + /* Write to ETHERNET MACCR */ + (heth->Instance)->MACCR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; + + /*----------------------- ETHERNET MACFFR Configuration --------------------*/ + /* Set the RA bit according to ETH ReceiveAll value */ + /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */ + /* Set the PCF bit according to ETH PassControlFrames value */ + /* Set the DBF bit according to ETH BroadcastFramesReception value */ + /* Set the DAIF bit according to ETH DestinationAddrFilter value */ + /* Set the PR bit according to ETH PromiscuousMode value */ + /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */ + /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */ + /* Write to ETHERNET MACFFR */ + (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll | + macinit.SourceAddrFilter | + macinit.PassControlFrames | + macinit.BroadcastFramesReception | + macinit.DestinationAddrFilter | + macinit.PromiscuousMode | + macinit.MulticastFramesFilter | + macinit.UnicastFramesFilter); + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACFFR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACFFR = tmpreg1; + + /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/ + /* Write to ETHERNET MACHTHR */ + (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh; + + /* Write to ETHERNET MACHTLR */ + (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow; + /*----------------------- ETHERNET MACFCR Configuration -------------------*/ + + /* Get the ETHERNET MACFCR value */ + tmpreg1 = (heth->Instance)->MACFCR; + /* Clear xx bits */ + tmpreg1 &= ETH_MACFCR_CLEAR_MASK; + + /* Set the PT bit according to ETH PauseTime value */ + /* Set the DZPQ bit according to ETH ZeroQuantaPause value */ + /* Set the PLT bit according to ETH PauseLowThreshold value */ + /* Set the UP bit according to ETH UnicastPauseFrameDetect value */ + /* Set the RFE bit according to ETH ReceiveFlowControl value */ + /* Set the TFE bit according to ETH TransmitFlowControl value */ + tmpreg1 |= (uint32_t)((macinit.PauseTime << 16U) | + macinit.ZeroQuantaPause | + macinit.PauseLowThreshold | + macinit.UnicastPauseFrameDetect | + macinit.ReceiveFlowControl | + macinit.TransmitFlowControl); + + /* Write to ETHERNET MACFCR */ + (heth->Instance)->MACFCR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACFCR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACFCR = tmpreg1; + + /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/ + /* Set the ETV bit according to ETH VLANTagComparison value */ + /* Set the VL bit according to ETH VLANTagIdentifier value */ + (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison | + macinit.VLANTagIdentifier); + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACVLANTR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACVLANTR = tmpreg1; + + /* Ethernet DMA default initialization ************************************/ + dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE; + dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE; + dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE; + dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE; + dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES; + dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE; + dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE; + dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES; + dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE; + dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE; + dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE; + dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT; + dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT; + dmainit.DescriptorSkipLength = 0x0U; + dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1; + + /* Get the ETHERNET DMAOMR value */ + tmpreg1 = (heth->Instance)->DMAOMR; + /* Clear xx bits */ + tmpreg1 &= ETH_DMAOMR_CLEAR_MASK; + + /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */ + /* Set the RSF bit according to ETH ReceiveStoreForward value */ + /* Set the DFF bit according to ETH FlushReceivedFrame value */ + /* Set the TSF bit according to ETH TransmitStoreForward value */ + /* Set the TTC bit according to ETH TransmitThresholdControl value */ + /* Set the FEF bit according to ETH ForwardErrorFrames value */ + /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */ + /* Set the RTC bit according to ETH ReceiveThresholdControl value */ + /* Set the OSF bit according to ETH SecondFrameOperate value */ + tmpreg1 |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame | + dmainit.ReceiveStoreForward | + dmainit.FlushReceivedFrame | + dmainit.TransmitStoreForward | + dmainit.TransmitThresholdControl | + dmainit.ForwardErrorFrames | + dmainit.ForwardUndersizedGoodFrames | + dmainit.ReceiveThresholdControl | + dmainit.SecondFrameOperate); + + /* Write to ETHERNET DMAOMR */ + (heth->Instance)->DMAOMR = (uint32_t)tmpreg1; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->DMAOMR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->DMAOMR = tmpreg1; + + /*----------------------- ETHERNET DMABMR Configuration ------------------*/ + /* Set the AAL bit according to ETH AddressAlignedBeats value */ + /* Set the FB bit according to ETH FixedBurst value */ + /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */ + /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */ + /* Set the DSL bit according to ETH DesciptorSkipLength value */ + /* Set the PR and DA bits according to ETH DMAArbitration value */ + (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats | + dmainit.FixedBurst | + dmainit.RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */ + dmainit.TxDMABurstLength | + (dmainit.DescriptorSkipLength << 2U) | + dmainit.DMAArbitration | + ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */ + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->DMABMR; + HAL_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->DMABMR = tmpreg1; + + if ((heth->Init).RxMode == ETH_RXINTERRUPT_MODE) + { + /* Enable the Ethernet Rx Interrupt */ + __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R); + } + + /* Initialize MAC address in ethernet MAC */ + ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr); +} + +/** + * @brief Configures the selected MAC address. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param MacAddr: The MAC address to configure + * This parameter can be one of the following values: + * @arg ETH_MAC_Address0: MAC Address0 + * @arg ETH_MAC_Address1: MAC Address1 + * @arg ETH_MAC_Address2: MAC Address2 + * @arg ETH_MAC_Address3: MAC Address3 + * @param Addr: Pointer to MAC address buffer data (6 bytes) + * @retval HAL status + */ +static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr) +{ + uint32_t tmpreg1; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + + /* Check the parameters */ + assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr)); + + /* Calculate the selected MAC address high register */ + tmpreg1 = ((uint32_t)Addr[5U] << 8U) | (uint32_t)Addr[4U]; + /* Load the selected MAC address high register */ + (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg1; + /* Calculate the selected MAC address low register */ + tmpreg1 = ((uint32_t)Addr[3U] << 24U) | ((uint32_t)Addr[2U] << 16U) | ((uint32_t)Addr[1U] << 8U) | Addr[0U]; + + /* Load the selected MAC address low register */ + (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg1; +} + +/** + * @brief Enables the MAC transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth) +{ + __IO uint32_t tmpreg1 = 0U; + + /* Enable the MAC transmission */ + (heth->Instance)->MACCR |= ETH_MACCR_TE; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + ETH_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; +} + +/** + * @brief Disables the MAC transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth) +{ + __IO uint32_t tmpreg1 = 0U; + + /* Disable the MAC transmission */ + (heth->Instance)->MACCR &= ~ETH_MACCR_TE; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + ETH_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; +} + +/** + * @brief Enables the MAC reception. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth) +{ + __IO uint32_t tmpreg1 = 0U; + + /* Enable the MAC reception */ + (heth->Instance)->MACCR |= ETH_MACCR_RE; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + ETH_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; +} + +/** + * @brief Disables the MAC reception. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth) +{ + __IO uint32_t tmpreg1 = 0U; + + /* Disable the MAC reception */ + (heth->Instance)->MACCR &= ~ETH_MACCR_RE; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->MACCR; + ETH_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->MACCR = tmpreg1; +} + +/** + * @brief Enables the DMA transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth) +{ + /* Enable the DMA transmission */ + (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST; +} + +/** + * @brief Disables the DMA transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth) +{ + /* Disable the DMA transmission */ + (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST; +} + +/** + * @brief Enables the DMA reception. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth) +{ + /* Enable the DMA reception */ + (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR; +} + +/** + * @brief Disables the DMA reception. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth) +{ + /* Disable the DMA reception */ + (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR; +} + +/** + * @brief Clears the ETHERNET transmit FIFO. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth) +{ + __IO uint32_t tmpreg1 = 0U; + + /* Set the Flush Transmit FIFO bit */ + (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF; + + /* Wait until the write operation will be taken into account: + at least four TX_CLK/RX_CLK clock cycles */ + tmpreg1 = (heth->Instance)->DMAOMR; + ETH_Delay(ETH_REG_WRITE_DELAY); + (heth->Instance)->DMAOMR = tmpreg1; +} + +/** + * @brief This function provides delay (in milliseconds) based on CPU cycles method. + * @param mdelay: specifies the delay time length, in milliseconds. + * @retval None + */ +static void ETH_Delay(uint32_t mdelay) +{ + __IO uint32_t Delay = mdelay * (SystemCoreClock / 8U / 1000U); + do + { + __NOP(); + } + while (Delay --); +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth) +{ + /* Init the ETH Callback settings */ + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; /* Legacy weak TxCpltCallback */ + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; /* Legacy weak RxCpltCallback */ + heth->DMAErrorCallback = HAL_ETH_ErrorCallback; /* Legacy weak DMAErrorCallback */ +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* ETH */ + +#endif /* HAL_ETH_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c similarity index 91% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c index 04b5215..8af23a2 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_exti.c + * @file stm32f1xx_hal_exti.c * @author MCD Application Team * @brief EXTI HAL module driver. * This file provides firmware functions to manage the following @@ -8,17 +8,6 @@ * + Initialization and de-initialization functions * + IO operation functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### EXTI Peripheral features ##### @@ -80,12 +69,24 @@ (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -195,11 +196,11 @@ HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT { assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; + + regval = AFIO->EXTICR[linepos >> 2u]; + regval &= ~(AFIO_EXTICR1_EXTI0 << (AFIO_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (AFIO_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + AFIO->EXTICR[linepos >> 2u] = regval; } } @@ -300,8 +301,8 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT { assert_param(IS_EXTI_GPIO_PIN(linepos)); - regval = (SYSCFG->EXTICR[linepos >> 2u] << 16u ); - pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 28u); + regval = AFIO->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = ((regval << (AFIO_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); } } @@ -349,9 +350,9 @@ HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) { assert_param(IS_EXTI_GPIO_PIN(linepos)); - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; + regval = AFIO->EXTICR[linepos >> 2u]; + regval &= ~(AFIO_EXTICR1_EXTI0 << (AFIO_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + AFIO->EXTICR[linepos >> 2u] = regval; } } @@ -466,14 +467,17 @@ void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) { uint32_t regval; - uint32_t linepos; uint32_t maskline; + uint32_t linepos; /* Check parameters */ assert_param(IS_EXTI_LINE(hexti->Line)); assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); assert_param(IS_EXTI_PENDING_EDGE(Edge)); + /* Prevent unused argument compilation warning */ + UNUSED(Edge); + /* Compute line mask */ linepos = (hexti->Line & EXTI_PIN_MASK); maskline = (1uL << linepos); @@ -501,6 +505,9 @@ void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); assert_param(IS_EXTI_PENDING_EDGE(Edge)); + /* Prevent unused argument compilation warning */ + UNUSED(Edge); + /* Compute line mask */ maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); @@ -545,3 +552,4 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c new file mode 100644 index 0000000..2a628e8 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c @@ -0,0 +1,967 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Prefetch on I-Code + (+) Option Bytes programming + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32F1xx devices. + + (#) FLASH Memory I/O Programming functions: this group includes all needed + functions to erase and program the main memory: + (++) Lock and Unlock the FLASH interface + (++) Erase function: Erase page, erase all pages + (++) Program functions: half word, word and doubleword + (#) FLASH Option Bytes Programming functions: this group includes all needed + functions to manage the Option Bytes: + (++) Lock and Unlock the Option Bytes + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Launch the Option Bytes loader + (++) Erase Option Bytes + (++) Program the data Option Bytes + (++) Get the Write protection. + (++) Get the user option bytes. + + (#) Interrupts and flags management functions : this group + includes all needed functions to: + (++) Handle FLASH interrupts + (++) Wait for last FLASH operation according to its status + (++) Get error flag status + + [..] In addition to these function, this driver includes a set of macros allowing + to handle the following operations: + + (+) Set/Get the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the half cycle access + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro ---------------------------- ---------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); +static void FLASH_SetErrorCode(void); +extern void FLASH_PageErase(uint32_t PageAddress); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim +@endverbatim + * @{ + */ + +/** + * @brief Program halfword, word or double word at a specified address + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @note FLASH should be previously erased before new programmation (only exception to this + * is when 0x0000 is programmed) + * + * @param TypeProgram: Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address: Specifies the address to be programmed. + * @param Data: Specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint8_t index = 0; + uint8_t nbiterations = 0; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + +#if defined(FLASH_BANK2_END) + if(Address <= FLASH_BANK1_END) + { +#endif /* FLASH_BANK2_END */ + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); +#if defined(FLASH_BANK2_END) + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2(FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_BANK2_END */ + + if(status == HAL_OK) + { + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + /* Program halfword (16-bit) at a specified address. */ + nbiterations = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Program word (32-bit = 2*16-bit) at a specified address. */ + nbiterations = 2U; + } + else + { + /* Program double word (64-bit = 4*16-bit) at a specified address. */ + nbiterations = 4U; + } + + for (index = 0U; index < nbiterations; index++) + { + FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index))); + +#if defined(FLASH_BANK2_END) + if(Address <= FLASH_BANK1_END) + { +#endif /* FLASH_BANK2_END */ + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); +#if defined(FLASH_BANK2_END) + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG); + } +#endif /* FLASH_BANK2_END */ + /* In case of error, stop programation procedure */ + if (status != HAL_OK) + { + break; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program halfword, word or double word at a specified address with interrupt enabled. + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param TypeProgram: Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address: Specifies the address to be programmed. + * @param Data: Specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + +#if defined(FLASH_BANK2_END) + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + if(Address <= FLASH_BANK1_END) + { + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1); + + }else + { + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); + } +#else + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); +#endif /* FLASH_BANK2_END */ + + pFlash.Address = Address; + pFlash.Data = Data; + + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD; + /* Program halfword (16-bit) at a specified address. */ + pFlash.DataRemaining = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD; + /* Program word (32-bit : 2*16-bit) at a specified address. */ + pFlash.DataRemaining = 2U; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD; + /* Program double word (64-bit : 4*16-bit) at a specified address. */ + pFlash.DataRemaining = 4U; + } + + /* Program halfword (16-bit) at a specified address. */ + FLASH_Program_HalfWord(Address, (uint16_t)Data); + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t addresstmp = 0U; + + /* Check FLASH operation error flags */ +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK1) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK1) || \ + (__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2))) +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) +#endif /* FLASH_BANK2_END */ + { + /* Return the faulty address */ + addresstmp = pFlash.Address; + /* Reset address */ + pFlash.Address = 0xFFFFFFFFU; + + /* Save the Error code */ + FLASH_SetErrorCode(); + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(addresstmp); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK1)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK1); +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); +#endif /* FLASH_BANK2_END */ + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still pages to erase */ + if(pFlash.DataRemaining != 0U) + { + addresstmp = pFlash.Address; + /*Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + + /*Increment sector number*/ + addresstmp = pFlash.Address + FLASH_PAGE_SIZE; + pFlash.Address = addresstmp; + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + FLASH_PageErase(addresstmp); + } + else + { + /* No more pages to Erase, user callback can be called. */ + /* Reset Sector and stop Erase pages procedure */ + pFlash.Address = addresstmp = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + } + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* Operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + +#if defined(FLASH_BANK2_END) + /* Stop Mass Erase procedure if no pending mass erase on other bank */ + if (HAL_IS_BIT_CLR(FLASH->CR2, FLASH_CR2_MER)) + { +#endif /* FLASH_BANK2_END */ + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(0U); + + /* Stop Mass Erase procedure*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } +#if defined(FLASH_BANK2_END) + } +#endif /* FLASH_BANK2_END */ + else + { + /* Nb of 16-bit data to program can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still 16-bit data to program */ + if(pFlash.DataRemaining != 0U) + { + /* Increment address to 16-bit */ + pFlash.Address += 2U; + addresstmp = pFlash.Address; + + /* Shift to have next 16-bit data */ + pFlash.Data = (pFlash.Data >> 16U); + + /* Operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); + + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); + } + else + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U); + } + else + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U); + } + + /* Reset Address and stop Program procedure */ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + } + +#if defined(FLASH_BANK2_END) + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG( FLASH_FLAG_EOP_BANK2)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2); + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still pages to erase*/ + if(pFlash.DataRemaining != 0U) + { + /* Indicate user which page address has been erased*/ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + + /* Increment page address to next page */ + pFlash.Address += FLASH_PAGE_SIZE; + addresstmp = pFlash.Address; + + /* Operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER); + + FLASH_PageErase(addresstmp); + } + else + { + /*No more pages to Erase*/ + + /*Reset Address and stop Erase pages procedure*/ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* Operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); + + if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_MER)) + { + /* MassErase ended. Return the selected bank*/ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(0U); + + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + else + { + /* Nb of 16-bit data to program can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still 16-bit data to program */ + if(pFlash.DataRemaining != 0U) + { + /* Increment address to 16-bit */ + pFlash.Address += 2U; + addresstmp = pFlash.Address; + + /* Shift to have next 16-bit data */ + pFlash.Data = (pFlash.Data >> 16U); + + /* Operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG); + + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); + } + else + { + /*Program ended. Return the selected address*/ + /* FLASH EOP interrupt user callback */ + if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address-2U); + } + else + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address-6U); + } + + /* Reset Address and stop Program procedure*/ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + } +#endif + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { +#if defined(FLASH_BANK2_END) + /* Operation is completed, disable the PG, PER and MER Bits for both bank */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); + CLEAR_BIT(FLASH->CR2, (FLASH_CR2_PG | FLASH_CR2_PER | FLASH_CR2_MER)); + + /* Disable End of FLASH Operation and Error source interrupts for both banks */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1 | FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); +#else + /* Operation is completed, disable the PG, PER and MER Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); + + /* Disable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); +#endif /* FLASH_BANK2_END */ + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which returned an error + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + status = HAL_ERROR; + } + } +#if defined(FLASH_BANK2_END) + if(READ_BIT(FLASH->CR2, FLASH_CR2_LOCK) != RESET) + { + /* Authorize the FLASH BANK2 Registers access */ + WRITE_REG(FLASH->KEYR2, FLASH_KEY1); + WRITE_REG(FLASH->KEYR2, FLASH_KEY2); + + /* Verify Flash BANK2 is unlocked */ + if(READ_BIT(FLASH->CR2, FLASH_CR2_LOCK) != RESET) + { + status = HAL_ERROR; + } + } +#endif /* FLASH_BANK2_END */ + + return status; +} + +/** + * @brief Locks the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + +#if defined(FLASH_BANK2_END) + /* Set the LOCK Bit to lock the FLASH BANK2 Registers access */ + SET_BIT(FLASH->CR2, FLASH_CR2_LOCK); + +#endif /* FLASH_BANK2_END */ + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE)) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @note This function will reset automatically the MCU. + * @retval None + */ +void HAL_FLASH_OB_Launch(void) +{ + /* Initiates a system reset request to launch the option byte loading */ + HAL_NVIC_SystemReset(); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions + * @brief Peripheral errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be: + * @ref FLASH_Error_Codes + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Program a half-word (16-bit) at a specified address. + * @param Address specify the address to be programmed. + * @param Data specify the data to be programmed. + * @retval None + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined(FLASH_BANK2_END) + if(Address <= FLASH_BANK1_END) + { +#endif /* FLASH_BANK2_END */ + /* Proceed to program the new data */ + SET_BIT(FLASH->CR, FLASH_CR_PG); +#if defined(FLASH_BANK2_END) + } + else + { + /* Proceed to program the new data */ + SET_BIT(FLASH->CR2, FLASH_CR2_PG); + } +#endif /* FLASH_BANK2_END */ + + /* Write data in the address */ + *(__IO uint16_t*)Address = Data; +} + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* There is no error flag set */ + return HAL_OK; +} + +#if defined(FLASH_BANK2_END) +/** + * @brief Wait for a FLASH BANK2 operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout) +{ + /* Wait for the FLASH BANK2 operation to complete by polling on BUSY flag to be reset. + Even if the FLASH BANK2 operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY_BANK2)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK2)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* If there is an error flag set */ + return HAL_OK; + +} +#endif /* FLASH_BANK2_END */ + +/** + * @brief Set the specific FLASH error flag. + * @retval None + */ +static void FLASH_SetErrorCode(void) +{ + uint32_t flags = 0U; + +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2)) +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) +#endif /* FLASH_BANK2_END */ + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; +#if defined(FLASH_BANK2_END) + flags |= FLASH_FLAG_WRPERR | FLASH_FLAG_WRPERR_BANK2; +#else + flags |= FLASH_FLAG_WRPERR; +#endif /* FLASH_BANK2_END */ + } +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)) +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) +#endif /* FLASH_BANK2_END */ + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG; +#if defined(FLASH_BANK2_END) + flags |= FLASH_FLAG_PGERR | FLASH_FLAG_PGERR_BANK2; +#else + flags |= FLASH_FLAG_PGERR; +#endif /* FLASH_BANK2_END */ + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV; + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPTVERR); + } + + /* Clear FLASH error pending bits */ + __HAL_FLASH_CLEAR_FLAG(flags); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c new file mode 100644 index 0000000..27b07b8 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c @@ -0,0 +1,1127 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the FLASH peripheral: + * + Extended Initialization/de-initialization functions + * + Extended I/O operation functions + * + Extended Peripheral Control functions + * + @verbatim + ============================================================================== + ##### Flash peripheral extended features ##### + ============================================================================== + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32F1xxx devices. It includes + + (++) Set/Reset the write protection + (++) Program the user Option Bytes + (++) Get the Read protection Level + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @addtogroup FLASH + * @{ + */ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_POSITION_IWDGSW_BIT FLASH_OBR_IWDG_SW_Pos +#define FLASH_POSITION_OB_USERDATA0_BIT FLASH_OBR_DATA0_Pos +#define FLASH_POSITION_OB_USERDATA1_BIT FLASH_OBR_DATA1_Pos +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +/* Erase operations */ +static void FLASH_MassErase(uint32_t Banks); +void FLASH_PageErase(uint32_t PageAddress); + +/* Option bytes control */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig); +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); +static uint32_t FLASH_OB_GetWRP(void); +static uint32_t FLASH_OB_GetRDP(void); +static uint8_t FLASH_OB_GetUser(void); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions + * @brief FLASH Memory Erasing functions + * +@verbatim + ============================================================================== + ##### FLASH Erasing Programming functions ##### + ============================================================================== + + [..] The FLASH Memory Erasing functions, includes the following functions: + (+) @ref HAL_FLASHEx_Erase: return only when erase has been done + (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback + is called with parameter 0xFFFFFFFF + + [..] Any operation of erase should follow these steps: + (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and + program memory access. + (#) Call the desired function to erase page. + (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation). + +@endverbatim + * @{ + */ + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError pointer to variable that + * contains the configuration information on faulty page in case of error + * (0xFFFFFFFF means that all the pages have been correctly erased) + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t address = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { +#if defined(FLASH_BANK2_END) + if (pEraseInit->Banks == FLASH_BANK_BOTH) + { + /* Mass Erase requested for Bank1 and Bank2 */ + /* Wait for last operation to be completed */ + if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \ + (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)) + { + /*Mass erase to be done*/ + FLASH_MassErase(FLASH_BANK_BOTH); + + /* Wait for last operation to be completed */ + if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \ + (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)) + { + status = HAL_OK; + } + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); + } + } + else if (pEraseInit->Banks == FLASH_BANK_2) + { + /* Mass Erase requested for Bank2 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Mass erase to be done*/ + FLASH_MassErase(FLASH_BANK_2); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); + } + } + else +#endif /* FLASH_BANK2_END */ + { + /* Mass Erase requested for Bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Mass erase to be done*/ + FLASH_MassErase(FLASH_BANK_1); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + } + } + } + else + { + /* Page Erase is requested */ + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + +#if defined(FLASH_BANK2_END) + /* Page Erase requested on address located on bank2 */ + if(pEraseInit->PageAddress > FLASH_BANK1_END) + { + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Erase by page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + } + else +#endif /* FLASH_BANK2_END */ + { + /* Page Erase requested on address located on bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Erase page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + +#if defined(FLASH_BANK2_END) + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); + +#endif + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done*/ + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + + pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE; + pFlash.DataRemaining = pEraseInit->NbPages; + pFlash.Address = pEraseInit->PageAddress; + + /*Erase 1st page and wait for IT*/ + FLASH_PageErase(pEraseInit->PageAddress); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + ============================================================================== + ##### Option Bytes Programming functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + option bytes operations. + +@endverbatim + * @{ + */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_FLASHEx_OBErase(void) +{ + uint8_t rdptmp = OB_RDP_LEVEL_0; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Get the actual read protection Option Byte value */ + rdptmp = FLASH_OB_GetRDP(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Restore the last read protection Option Byte value */ + status = FLASH_OB_RDP_LevelConfig(rdptmp); + } + } + + /* Return the erase status */ + return status; +} + +/** + * @brief Program option bytes + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Write protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /* Enable of Write protection on the selected page */ + status = FLASH_OB_EnableWRP(pOBInit->WRPPage); + } + else + { + /* Disable of Write protection on the selected page */ + status = FLASH_OB_DisableWRP(pOBInit->WRPPage); + } + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + { + status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* USER configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + { + status = FLASH_OB_UserConfig(pOBInit->USERConfig); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* DATA configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA) + { + status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER; + + /*Get WRP*/ + pOBInit->WRPPage = FLASH_OB_GetWRP(); + + /*Get RDP Level*/ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /*Get USER*/ + pOBInit->USERConfig = FLASH_OB_GetUser(); +} + +/** + * @brief Get the Option byte user data + * @param DATAAdress Address of the option byte DATA + * This parameter can be one of the following values: + * @arg @ref OB_DATA_ADDRESS_DATA0 + * @arg @ref OB_DATA_ADDRESS_DATA1 + * @retval Value programmed in USER data + */ +uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress) +{ + uint32_t value = 0; + + if (DATAAdress == OB_DATA_ADDRESS_DATA0) + { + /* Get value programmed in OB USER Data0 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT; + } + else + { + /* Get value programmed in OB USER Data1 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT; + } + + return value; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Full erase of FLASH memory Bank + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg @ref FLASH_BANK_1 Bank1 to be erased + @if STM32F101xG + * @arg @ref FLASH_BANK_2 Bank2 to be erased + * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased + @endif + @if STM32F103xG + * @arg @ref FLASH_BANK_2 Bank2 to be erased + * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased + @endif + * + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined(FLASH_BANK2_END) + if(Banks == FLASH_BANK_BOTH) + { + /* bank1 & bank2 will be erased*/ + SET_BIT(FLASH->CR, FLASH_CR_MER); + SET_BIT(FLASH->CR2, FLASH_CR2_MER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + SET_BIT(FLASH->CR2, FLASH_CR2_STRT); + } + else if(Banks == FLASH_BANK_2) + { + /*Only bank2 will be erased*/ + SET_BIT(FLASH->CR2, FLASH_CR2_MER); + SET_BIT(FLASH->CR2, FLASH_CR2_STRT); + } + else + { +#endif /* FLASH_BANK2_END */ +#if !defined(FLASH_BANK2_END) + /* Prevent unused argument(s) compilation warning */ + UNUSED(Banks); +#endif /* FLASH_BANK2_END */ + /* Only bank1 will be erased*/ + SET_BIT(FLASH->CR, FLASH_CR_MER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +#if defined(FLASH_BANK2_END) + } +#endif /* FLASH_BANK2_END */ +} + +/** + * @brief Enable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write protected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFF; +#if defined(FLASH_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFF; +#endif /* FLASH_WRP1_WRP1 */ +#if defined(FLASH_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFF; +#endif /* FLASH_WRP2_WRP2 */ +#if defined(FLASH_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFF; +#endif /* FLASH_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be protected ******/ + WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage)); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES64TO95MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U); +#endif /* OB_WRP_PAGES64TO95MASK */ +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES96TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO255MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO511MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES96TO127MASK */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + /* Enable write protection */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 &= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP0_WRP0 */ + +#if defined(FLASH_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 &= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP1_WRP1 */ + +#if defined(FLASH_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 &= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP2_WRP2 */ + +#if defined(FLASH_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 &= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Disable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write unprotected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFF; +#if defined(FLASH_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFF; +#endif /* FLASH_WRP1_WRP1 */ +#if defined(FLASH_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFF; +#endif /* FLASH_WRP2_WRP2 */ +#if defined(FLASH_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFF; +#endif /* FLASH_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be unprotected ******/ + WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES64TO95MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U); +#endif /* OB_WRP_PAGES64TO95MASK */ +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES96TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO255MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO511MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES96TO127MASK */ + + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 |= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP0_WRP0 */ + +#if defined(FLASH_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 |= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP1_WRP1 */ + +#if defined(FLASH_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 |= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP2_WRP2 */ + +#if defined(FLASH_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 |= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + return status; +} + +/** + * @brief Set the read protection level. + * @param ReadProtectLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + + WRITE_REG(OB->RDP, ReadProtectLevel); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte. + * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param UserConfig The FLASH User Option Bytes values FLASH_OBR_IWDG_SW(Bit2), + * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4). + * And BFBF2(Bit5) for STM32F101xG and STM32F103xG . + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW))); + assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST))); + assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST))); +#if defined(FLASH_BANK2_END) + assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET))); +#endif /* FLASH_BANK2_END */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_BANK2_END) + OB->USER = (UserConfig | 0xF0U); +#else + OB->USER = (UserConfig | 0x88U); +#endif /* FLASH_BANK2_END */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param Address specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data specifies the data to be programmed. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enables the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @retval The FLASH Write Protection Option Bytes value + */ +static uint32_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (uint32_t)(READ_REG(FLASH->WRPR)); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @retval FLASH RDP level + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t readstatus = OB_RDP_LEVEL_0; + uint32_t tmp_reg = 0U; + + /* Read RDP level bits */ + tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT); + + if (tmp_reg == FLASH_OBR_RDPRT) + { + readstatus = OB_RDP_LEVEL_1; + } + else + { + readstatus = OB_RDP_LEVEL_0; + } + + return readstatus; +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values: FLASH_OBR_IWDG_SW(Bit2), + * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4). + * And FLASH_OBR_BFB2(Bit5) for STM32F101xG and STM32F103xG . + */ +static uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Erase the specified FLASH memory page + * @param PageAddress FLASH page to erase + * The value of this parameter depend on device used within the same series + * + * @retval None + */ +void FLASH_PageErase(uint32_t PageAddress) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined(FLASH_BANK2_END) + if(PageAddress > FLASH_BANK1_END) + { + /* Proceed to erase the page */ + SET_BIT(FLASH->CR2, FLASH_CR2_PER); + WRITE_REG(FLASH->AR2, PageAddress); + SET_BIT(FLASH->CR2, FLASH_CR2_STRT); + } + else + { +#endif /* FLASH_BANK2_END */ + /* Proceed to erase the page */ + SET_BIT(FLASH->CR, FLASH_CR_PER); + WRITE_REG(FLASH->AR, PageAddress); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +#if defined(FLASH_BANK2_END) + } +#endif /* FLASH_BANK2_END */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c new file mode 100644 index 0000000..6ba68a9 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c @@ -0,0 +1,587 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each + port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software + in several modes: + (+) Input mode + (+) Analog mode + (+) Output mode + (+) Alternate function mode + (+) External interrupt/event lines + + [..] + During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + [..] + All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + [..] + In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + [..] + All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + [..] + The external interrupt/event controller consists of up to 20 edge detectors in connectivity + line devices, or 19 edge detectors in other devices for generating event/interrupt requests. + Each input line can be independently configured to select the type (event or interrupt) and + the corresponding trigger event (rising or falling or both). Each line can also masked + independently. A pending register maintains the status line of the interrupt requests + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO APB2 clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PD0 and PD1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE 0x00000003u +#define EXTI_MODE 0x10000000u +#define GPIO_MODE_IT 0x00010000u +#define GPIO_MODE_EVT 0x00020000u +#define RISING_EDGE 0x00100000u +#define FALLING_EDGE 0x00200000u +#define GPIO_OUTPUT_TYPE 0x00000010u + +#define GPIO_NUMBER 16u + +/* Definitions for bit manipulation of CRL and CRH register */ +#define GPIO_CR_MODE_INPUT 0x00000000u /*!< 00: Input mode (reset state) */ +#define GPIO_CR_CNF_ANALOG 0x00000000u /*!< 00: Analog mode */ +#define GPIO_CR_CNF_INPUT_FLOATING 0x00000004u /*!< 01: Floating input (reset state) */ +#define GPIO_CR_CNF_INPUT_PU_PD 0x00000008u /*!< 10: Input with pull-up / pull-down */ +#define GPIO_CR_CNF_GP_OUTPUT_PP 0x00000000u /*!< 00: General purpose output push-pull */ +#define GPIO_CR_CNF_GP_OUTPUT_OD 0x00000004u /*!< 01: General purpose output Open-drain */ +#define GPIO_CR_CNF_AF_OUTPUT_PP 0x00000008u /*!< 10: Alternate function output Push-pull */ +#define GPIO_CR_CNF_AF_OUTPUT_OD 0x0000000Cu /*!< 11: Alternate function output Open-drain */ + +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the GPIOs + to be ready for use. + +@endverbatim + * @{ + */ + + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t ioposition; + uint32_t iocurrent; + uint32_t temp; + uint32_t config = 0x00u; + __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */ + uint32_t registeroffset; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */ + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get the IO position */ + ioposition = (0x01uL << position); + + /* Get the current IO position */ + iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; + + if (iocurrent == ioposition) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + + /* Based on the required mode, filling config variable with MODEy[1:0] and CNFy[3:2] corresponding bits */ + switch (GPIO_Init->Mode) + { + /* If we are configuring the pin in OUTPUT push-pull mode */ + case GPIO_MODE_OUTPUT_PP: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_PP; + break; + + /* If we are configuring the pin in OUTPUT open-drain mode */ + case GPIO_MODE_OUTPUT_OD: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_OD; + break; + + /* If we are configuring the pin in ALTERNATE FUNCTION push-pull mode */ + case GPIO_MODE_AF_PP: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_PP; + break; + + /* If we are configuring the pin in ALTERNATE FUNCTION open-drain mode */ + case GPIO_MODE_AF_OD: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_OD; + break; + + /* If we are configuring the pin in INPUT (also applicable to EVENT and IT mode) */ + case GPIO_MODE_INPUT: + case GPIO_MODE_IT_RISING: + case GPIO_MODE_IT_FALLING: + case GPIO_MODE_IT_RISING_FALLING: + case GPIO_MODE_EVT_RISING: + case GPIO_MODE_EVT_FALLING: + case GPIO_MODE_EVT_RISING_FALLING: + /* Check the GPIO pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + if (GPIO_Init->Pull == GPIO_NOPULL) + { + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_FLOATING; + } + else if (GPIO_Init->Pull == GPIO_PULLUP) + { + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; + + /* Set the corresponding ODR bit */ + GPIOx->BSRR = ioposition; + } + else /* GPIO_PULLDOWN */ + { + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; + + /* Reset the corresponding ODR bit */ + GPIOx->BRR = ioposition; + } + break; + + /* If we are configuring the pin in INPUT analog mode */ + case GPIO_MODE_ANALOG: + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_ANALOG; + break; + + /* Parameters are checked with assert_param */ + default: + break; + } + + /* Check if the current bit belongs to first half or last half of the pin count number + in order to address CRH or CRL register*/ + configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; + registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2u) : ((position - 8u) << 2u); + + /* Apply the new configuration of the pin to the register */ + MODIFY_REG((*configregister), ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset), (config << registeroffset)); + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + /* Enable AFIO Clock */ + __HAL_RCC_AFIO_CLK_ENABLE(); + temp = AFIO->EXTICR[position >> 2u]; + CLEAR_BIT(temp, (0x0Fu) << (4u * (position & 0x03u))); + SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4u * (position & 0x03u))); + AFIO->EXTICR[position >> 2u] = temp; + + + /* Configure the interrupt mask */ + if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + SET_BIT(EXTI->IMR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->IMR, iocurrent); + } + + /* Configure the event mask */ + if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + SET_BIT(EXTI->EMR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->EMR, iocurrent); + } + + /* Enable or disable the rising trigger */ + if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + SET_BIT(EXTI->RTSR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->RTSR, iocurrent); + } + + /* Enable or disable the falling trigger */ + if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + SET_BIT(EXTI->FTSR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->FTSR, iocurrent); + } + } + } + + position++; + } +} + +/** + * @brief De-initializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */ + uint32_t registeroffset; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = AFIO->EXTICR[position >> 2u]; + tmp &= 0x0FuL << (4u * (position & 0x03u)); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) + { + tmp = 0x0FuL << (4u * (position & 0x03u)); + CLEAR_BIT(AFIO->EXTICR[position >> 2u], tmp); + + /* Clear EXTI line configuration */ + CLEAR_BIT(EXTI->IMR, (uint32_t)iocurrent); + CLEAR_BIT(EXTI->EMR, (uint32_t)iocurrent); + + /* Clear Rising Falling edge configuration */ + CLEAR_BIT(EXTI->RTSR, (uint32_t)iocurrent); + CLEAR_BIT(EXTI->FTSR, (uint32_t)iocurrent); + } + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Check if the current bit belongs to first half or last half of the pin count number + in order to address CRH or CRL register */ + configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; + registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2u) : ((position - 8u) << 2u); + + /* CRL/CRH default value is floating input(0x04) shifted to correct position */ + MODIFY_REG(*configregister, ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset), GPIO_CRL_CNF0_0 << registeroffset); + + /* ODR default value is 0 */ + CLEAR_BIT(GPIOx->ODR, iocurrent); + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read and Write + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the GPIOs. + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Sets or clears the selected data port bit. + * + * @note This function uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState: specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << 16u; + } +} + +/** + * @brief Toggles the specified GPIO pin + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: Specifies the pins to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Ouput Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Locks GPIO Pins configuration registers. +* @note The locking mechanism allows the IO configuration to be frozen. When the LOCK sequence +* has been applied on a port bit, it is no longer possible to modify the value of the port bit until +* the next reset. +* @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral +* @param GPIO_Pin: specifies the port bit to be locked. +* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). +* @retval None +*/ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + SET_BIT(tmp, GPIO_Pin); + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((uint32_t)(GPIOx->LCKR & GPIO_LCKR_LCKK)) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief This function handles EXTI interrupt request. + * @param GPIO_Pin: Specifies the pins connected EXTI line + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callbacks. + * @param GPIO_Pin: Specifies the pins connected EXTI line + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c new file mode 100644 index 0000000..e6dea5b --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c @@ -0,0 +1,127 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio_ex.c + * @author MCD Application Team + * @brief GPIO Extension HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) extension peripheral. + * + Extended features functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral extension features ##### + ============================================================================== + [..] GPIO module on STM32F1 family, manage also the AFIO register: + (+) Possibility to use the EVENTOUT Cortex feature + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to use EVENTOUT Cortex feature + (#) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout() + (#) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout() + (#) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout() + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/** @defgroup GPIOEx_Exported_Functions GPIOEx Exported Functions + * @{ + */ + +/** @defgroup GPIOEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout() + (+) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout() + (+) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout() + +@endverbatim + * @{ + */ + +/** + * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected. + * @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal. + * This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT. + * @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal. + * This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN. + * @retval None + */ +void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource) +{ + /* Verify the parameters */ + assert_param(IS_AFIO_EVENTOUT_PORT(GPIO_PortSource)); + assert_param(IS_AFIO_EVENTOUT_PIN(GPIO_PinSource)); + + /* Apply the new configuration */ + MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT) | (AFIO_EVCR_PIN), (GPIO_PortSource) | (GPIO_PinSource)); +} + +/** + * @brief Enables the Event Output. + * @retval None + */ +void HAL_GPIOEx_EnableEventout(void) +{ + SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); +} + +/** + * @brief Disables the Event Output. + * @retval None + */ +void HAL_GPIOEx_DisableEventout(void) +{ + CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_hcd.c similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_hcd.c index c7c5b70..5fdcbfb 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_hcd.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_hcd.c + * @file stm32f1xx_hal_hcd.c * @author MCD Application Team * @brief HCD HAL module driver. * This file provides firmware functions to manage the following @@ -10,17 +10,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -36,9 +25,6 @@ (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API: (##) Enable the HCD/USB Low Level interface clock using the following macros (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) - (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode) - (##) Initialize the related GPIO clocks (##) Configure HCD pin-out (##) Configure HCD NVIC interrupt @@ -51,17 +37,28 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ #ifdef HAL_HCD_MODULE_ENABLED -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) /** @defgroup HCD HCD * @brief HCD HAL module driver @@ -184,7 +181,6 @@ HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd) * This parameter can be a value from 0 to 255 * @param speed Current device speed. * This parameter can be one of these values: - * HCD_DEVICE_SPEED_HIGH: High speed mode, * HCD_DEVICE_SPEED_FULL: Full speed mode, * HCD_DEVICE_SPEED_LOW: Low speed mode * @param ep_type Endpoint Type. @@ -482,7 +478,7 @@ HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, hhcd->hc[ch_num].ch_num = ch_num; hhcd->hc[ch_num].state = HC_IDLE; - return USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[ch_num], (uint8_t)hhcd->Init.dma_enable); + return USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[ch_num]); } /** @@ -537,19 +533,14 @@ void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd) if ((USBx_HPRT0 & USB_OTG_HPRT_PCSTS) == 0U) { - /* Flush USB Fifo */ - (void)USB_FlushTxFifo(USBx, 0x10U); - (void)USB_FlushRxFifo(USBx); - - /* Restore FS Clock */ - (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ); - /* Handle Host Port Disconnect Interrupt */ #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) hhcd->DisconnectCallback(hhcd); #else HAL_HCD_Disconnect_Callback(hhcd); #endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + + (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ); } } @@ -1192,13 +1183,13 @@ static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR) { __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_AHBERR); - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_BBERR) == USB_OTG_HCINT_BBERR) { __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_BBERR); hhcd->hc[ch_num].state = HC_BBLERR; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_ACK) == USB_OTG_HCINT_ACK) @@ -1207,21 +1198,26 @@ static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL) { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL); + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); hhcd->hc[ch_num].state = HC_STALL; + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR) { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR); + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); hhcd->hc[ch_num].state = HC_DATATGLERR; + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR) { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR); + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); hhcd->hc[ch_num].state = HC_XACTERR; (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR); } else { @@ -1230,17 +1226,12 @@ static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR) { + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC) { - if (hhcd->Init.dma_enable != 0U) - { - hhcd->hc[ch_num].xfer_count = hhcd->hc[ch_num].XferSize - \ - (USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ); - } - hhcd->hc[ch_num].state = HC_XFRC; hhcd->hc[ch_num].ErrCnt = 0U; __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC); @@ -1248,15 +1239,26 @@ static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) || (hhcd->hc[ch_num].ep_type == EP_TYPE_BULK)) { + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); } - else if ((hhcd->hc[ch_num].ep_type == EP_TYPE_INTR) || - (hhcd->hc[ch_num].ep_type == EP_TYPE_ISOC)) + else if (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR) { USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; hhcd->hc[ch_num].urb_state = URB_DONE; +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); +#else + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + else if (hhcd->hc[ch_num].ep_type == EP_TYPE_ISOC) + { + hhcd->hc[ch_num].urb_state = URB_DONE; + hhcd->hc[ch_num].toggle_in ^= 1U; + #if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); #else @@ -1282,6 +1284,8 @@ static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH) { + __HAL_HCD_MASK_HALT_HC_INT(ch_num); + if (hhcd->hc[ch_num].state == HC_XFRC) { hhcd->hc[ch_num].urb_state = URB_DONE; @@ -1330,30 +1334,23 @@ static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) /* ... */ } __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH); - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK) { if (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR) { hhcd->hc[ch_num].ErrCnt = 0U; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } else if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) || (hhcd->hc[ch_num].ep_type == EP_TYPE_BULK)) { hhcd->hc[ch_num].ErrCnt = 0U; - - if (hhcd->Init.dma_enable == 0U) - { - hhcd->hc[ch_num].state = HC_NAK; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } + hhcd->hc[ch_num].state = HC_NAK; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); + (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } else { @@ -1385,8 +1382,7 @@ static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR) { __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_AHBERR); - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_ACK) == USB_OTG_HCINT_ACK) { @@ -1395,14 +1391,16 @@ static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) if (hhcd->hc[ch_num].do_ping == 1U) { hhcd->hc[ch_num].do_ping = 0U; - hhcd->hc[ch_num].urb_state = URB_NOTREADY; + hhcd->hc[ch_num].urb_state = URB_NOTREADY; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR) { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR); + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC) { @@ -1414,76 +1412,55 @@ static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) hhcd->hc[ch_num].do_ping = 1U; __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET); } + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); + (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC); hhcd->hc[ch_num].state = HC_XFRC; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET) { hhcd->hc[ch_num].state = HC_NYET; hhcd->hc[ch_num].do_ping = 1U; hhcd->hc[ch_num].ErrCnt = 0U; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL) { __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL); - hhcd->hc[ch_num].state = HC_STALL; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); + hhcd->hc[ch_num].state = HC_STALL; } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK) { hhcd->hc[ch_num].ErrCnt = 0U; hhcd->hc[ch_num].state = HC_NAK; - if (hhcd->hc[ch_num].do_ping == 0U) - { - if (hhcd->hc[ch_num].speed == HCD_DEVICE_SPEED_HIGH) - { - hhcd->hc[ch_num].do_ping = 1U; - } - } - + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR) { - if (hhcd->Init.dma_enable == 0U) - { - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else - { - hhcd->hc[ch_num].ErrCnt++; - if (hhcd->hc[ch_num].ErrCnt > 2U) - { - hhcd->hc[ch_num].ErrCnt = 0U; - hhcd->hc[ch_num].urb_state = URB_ERROR; - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else - HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - else - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - } - } + hhcd->hc[ch_num].state = HC_XACTERR; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); + (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR); } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR) { - hhcd->hc[ch_num].state = HC_DATATGLERR; + __HAL_HCD_UNMASK_HALT_HC_INT(ch_num); (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); + __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR); + hhcd->hc[ch_num].state = HC_DATATGLERR; } else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH) { + __HAL_HCD_MASK_HALT_HC_INT(ch_num); + if (hhcd->hc[ch_num].state == HC_XFRC) { hhcd->hc[ch_num].urb_state = URB_DONE; @@ -1544,12 +1521,7 @@ static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) } __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH); - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ } else { @@ -1716,7 +1688,7 @@ static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd) * @} */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ #endif /* HAL_HCD_MODULE_ENABLED */ /** @@ -1726,3 +1698,5 @@ static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c index c2a8eb7..45506a2 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_i2c.c + * @file stm32f1xx_hal_i2c.c * @author MCD Application Team * @brief I2C HAL module driver. * This file provides firmware functions to manage the following @@ -9,17 +9,6 @@ * + IO operation functions * + Peripheral State, Mode and Error functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -30,7 +19,7 @@ (#) Declare a I2C_HandleTypeDef handle structure, for example: I2C_HandleTypeDef hi2c; - (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: (##) Enable the I2Cx interface clock (##) I2C pins configuration (+++) Enable the clock for the I2C GPIOs @@ -39,59 +28,59 @@ (+++) Configure the I2Cx interrupt priority (+++) Enable the NVIC I2C IRQ Channel (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel (+++) Enable the DMAx interface clock using (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx stream + (+++) Configure the DMA Tx or Rx channel (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx stream + the DMA Tx or Rx channel (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure. - (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit() API. + (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit() API. - (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : *** Polling mode IO operation *** ================================= [..] - (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() *** Polling mode IO MEM operation *** ===================================== [..] - (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() *** Interrupt mode IO operation *** =================================== [..] - (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() - (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() - (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() - (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() - (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() *** Interrupt mode or DMA mode IO sequential operation *** ========================================================== @@ -100,14 +89,14 @@ when a direction change during transfer [..] (+) A specific option field manage the different steps of a sequential transfer - (+) Option field values are defined through I2C_XferOptions_definition and are listed below: + (+) Option field values are defined through @ref I2C_XferOptions_definition and are listed below: (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address and data to transfer without a final stop condition (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address and data to transfer without a final stop condition, an then permit a call the same master sequential interface - several times (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() - or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() + or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address and with new data to transfer if the direction change or manage only the new data to transfer if no direction change and without a final stop condition in both cases @@ -131,85 +120,85 @@ Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. (+) Different sequential I2C interfaces are listed below: - (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Seq_Transmit_IT() - or using HAL_I2C_Master_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Seq_Receive_IT() - or using HAL_I2C_Master_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() - (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT() - (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() + or using @ref HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() + or using @ref HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). - (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_ListenCpltCallback() - (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Seq_Transmit_IT() - or using HAL_I2C_Slave_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Seq_Receive_IT() - or using HAL_I2C_Slave_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() + (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() + or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() + or using @ref HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() *** Interrupt mode IO MEM operation *** ======================================= [..] (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using - HAL_I2C_Mem_Write_IT() - (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + @ref HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using - HAL_I2C_Mem_Read_IT() - (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() + @ref HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() *** DMA mode IO operation *** ============================== [..] (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Master_Transmit_DMA() - (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + @ref HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() (+) Receive in master mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Master_Receive_DMA() - (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + @ref HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Slave_Transmit_DMA() - (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + @ref HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Slave_Receive_DMA() - (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + @ref HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() *** DMA mode IO MEM operation *** ================================= [..] (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using - HAL_I2C_Mem_Write_DMA() - (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + @ref HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using - HAL_I2C_Mem_Read_DMA() - (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() + @ref HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() *** I2C HAL driver macros list *** @@ -217,22 +206,22 @@ [..] Below the list of most used macros in I2C HAL driver. - (+) __HAL_I2C_ENABLE: Enable the I2C peripheral - (+) __HAL_I2C_DISABLE: Disable the I2C peripheral - (+) __HAL_I2C_GET_FLAG: Checks whether the specified I2C flag is set or not - (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag - (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt - (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) @ref __HAL_I2C_GET_FLAG: Checks whether the specified I2C flag is set or not + (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt *** Callback registration *** ============================================= [..] The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() to register an interrupt callback. [..] - Function HAL_I2C_RegisterCallback() allows to register following callbacks: + Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: (+) MasterTxCpltCallback : callback for Master transmission end of transfer. (+) MasterRxCpltCallback : callback for Master reception end of transfer. (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. @@ -247,11 +236,11 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. [..] - For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). [..] - Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default weak function. - HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) MasterTxCpltCallback : callback for Master transmission end of transfer. @@ -266,41 +255,71 @@ (+) MspInitCallback : callback for Msp Init. (+) MspDeInitCallback : callback for Msp DeInit. [..] - For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). [..] - By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET all callbacks are set to the corresponding weak functions: - examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. [..] - Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() - or HAL_I2C_Init() function. + using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() + or @ref HAL_I2C_Init() function. [..] When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or not defined, the callback registration feature is not available and all callbacks are set to the corresponding weak functions. + *** I2C Workarounds linked to Silicon Limitation *** + ==================================================== + [..] + Below the list of all silicon limitations implemented for HAL on STM32F1xx product. + (@) See ErrataSheet to know full silicon limitation list of your product. + + (+) Workarounds Implemented inside I2C HAL Driver + (++) Wrong data read into data register (Polling and Interrupt mode) + (++) Start cannot be generated after a misplaced Stop + (++) Some software events must be managed before the current byte is being transferred: + Workaround: Use DMA in general, except when the Master is receiving a single byte. + For Interupt mode, I2C should have the highest priority in the application. + (++) Mismatch on the "Setup time for a repeated Start condition" timing parameter: + Workaround: Reduce the frequency down to 88 kHz or use the I2C Fast-mode if + supported by the slave. + (++) Data valid time (tVD;DAT) violated without the OVR flag being set: + Workaround: If the slave device allows it, use the clock stretching mechanism + by programming NoStretchMode = I2C_NOSTRETCH_DISABLE in @ref HAL_I2C_Init. [..] (@) You can refer to the I2C HAL driver header file for more useful macros @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -1151,6 +1170,8 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevA */ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) { + __IO uint32_t count = 0U; + /* Init tickstart for timeout management*/ uint32_t tickstart = HAL_GetTick(); @@ -1204,22 +1225,36 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd /* Disable Acknowledge */ CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Clear ADDR flag */ __HAL_I2C_CLEAR_ADDRFLAG(hi2c); /* Generate Stop */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Re-enable IRQs */ + __enable_irq(); } else if (hi2c->XferSize == 2U) { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - /* Enable Pos */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Clear ADDR flag */ __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Re-enable IRQs */ + __enable_irq(); } else { @@ -1262,6 +1297,10 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd return HAL_ERROR; } + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Generate Stop */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); @@ -1275,6 +1314,9 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd hi2c->XferSize--; hi2c->XferCount--; + /* Re-enable IRQs */ + __enable_irq(); + /* Read data from DR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; @@ -1297,6 +1339,10 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd /* Disable Acknowledge */ CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Read data from DR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; @@ -1308,10 +1354,27 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd hi2c->XferCount--; /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + count = I2C_TIMEOUT_FLAG * (SystemCoreClock / 25U / 1000U); + do { - return HAL_ERROR; + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Re-enable IRQs */ + __enable_irq(); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET); /* Generate Stop */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); @@ -1326,6 +1389,9 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd hi2c->XferSize--; hi2c->XferCount--; + /* Re-enable IRQs */ + __enable_irq(); + /* Read data from DR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; @@ -1996,11 +2062,9 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t /* Set the unused DMA callbacks to NULL */ hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferM1CpltCallback = NULL; - hi2c->hdmatx->XferM1HalfCpltCallback = NULL; hi2c->hdmatx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); } else @@ -2154,11 +2218,9 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t D /* Set the unused DMA callbacks to NULL */ hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferM1CpltCallback = NULL; - hi2c->hdmarx->XferM1HalfCpltCallback = NULL; hi2c->hdmarx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); } else @@ -2291,11 +2353,9 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *p /* Set the unused DMA callbacks to NULL */ hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferM1CpltCallback = NULL; - hi2c->hdmatx->XferM1HalfCpltCallback = NULL; hi2c->hdmatx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); } else @@ -2405,11 +2465,9 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pD /* Set the unused DMA callbacks to NULL */ hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferM1CpltCallback = NULL; - hi2c->hdmarx->XferM1HalfCpltCallback = NULL; hi2c->hdmarx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); } else @@ -2605,6 +2663,8 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress */ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) { + __IO uint32_t count = 0U; + /* Init tickstart for timeout management*/ uint32_t tickstart = HAL_GetTick(); @@ -2661,25 +2721,41 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, /* Disable Acknowledge */ CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Clear ADDR flag */ __HAL_I2C_CLEAR_ADDRFLAG(hi2c); /* Generate Stop */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Re-enable IRQs */ + __enable_irq(); } else if (hi2c->XferSize == 2U) { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - /* Enable Pos */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Clear ADDR flag */ __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Re-enable IRQs */ + __enable_irq(); } else { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); /* Clear ADDR flag */ __HAL_I2C_CLEAR_ADDRFLAG(hi2c); } @@ -2716,6 +2792,10 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, return HAL_ERROR; } + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Generate Stop */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); @@ -2729,6 +2809,9 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, hi2c->XferSize--; hi2c->XferCount--; + /* Re-enable IRQs */ + __enable_irq(); + /* Read data from DR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; @@ -2751,6 +2834,10 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, /* Disable Acknowledge */ CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + /* Disable all active IRQs around ADDR clearing and STOP programming because the EV6_3 + software sequence must complete before the current byte end of transfer */ + __disable_irq(); + /* Read data from DR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; @@ -2762,10 +2849,27 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, hi2c->XferCount--; /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + count = I2C_TIMEOUT_FLAG * (SystemCoreClock / 25U / 1000U); + do { - return HAL_ERROR; + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Re-enable IRQs */ + __enable_irq(); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET); /* Generate Stop */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); @@ -2780,6 +2884,9 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, hi2c->XferSize--; hi2c->XferCount--; + /* Re-enable IRQs */ + __enable_irq(); + /* Read data from DR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; @@ -3087,10 +3194,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd hi2c->XferCount = Size; hi2c->XferSize = hi2c->XferCount; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - hi2c->Memaddress = MemAddress; - hi2c->MemaddSize = MemAddSize; - hi2c->EventCount = 0U; if (hi2c->XferSize > 0U) { @@ -3104,11 +3207,9 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd /* Set the unused DMA callbacks to NULL */ hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferM1CpltCallback = NULL; - hi2c->hdmatx->XferM1HalfCpltCallback = NULL; hi2c->hdmatx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); } else @@ -3271,10 +3372,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddr hi2c->XferCount = Size; hi2c->XferSize = hi2c->XferCount; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - hi2c->Memaddress = MemAddress; - hi2c->MemaddSize = MemAddSize; - hi2c->EventCount = 0U; if (hi2c->XferSize > 0U) { @@ -3288,11 +3385,9 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddr /* Set the unused DMA callbacks to NULL */ hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferM1CpltCallback = NULL; - hi2c->hdmarx->XferM1HalfCpltCallback = NULL; hi2c->hdmarx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); } else @@ -3420,7 +3515,7 @@ HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAdd { /* Get tick */ uint32_t tickstart = HAL_GetTick(); - uint32_t I2C_Trials = 0U; + uint32_t I2C_Trials = 1U; FlagStatus tmp1; FlagStatus tmp2; @@ -3725,7 +3820,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint1 hi2c->hdmatx->XferHalfCpltCallback = NULL; hi2c->hdmatx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); } else @@ -4066,7 +4161,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16 hi2c->hdmarx->XferHalfCpltCallback = NULL; hi2c->hdmarx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); } else @@ -4344,7 +4439,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_ hi2c->hdmatx->XferHalfCpltCallback = NULL; hi2c->hdmatx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); } else @@ -4584,7 +4679,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t hi2c->hdmarx->XferHalfCpltCallback = NULL; hi2c->hdmarx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); } else @@ -4965,6 +5060,9 @@ void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) /* Clear BERR flag */ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + /* Workaround: Start cannot be generated after a misplaced Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_SWRST); } /* I2C Arbitration Lost error interrupt occurred ---------------------------*/ @@ -5611,9 +5709,7 @@ static void I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c) } else { - /* Disable BUF interrupt, this help to treat correctly the last 2 bytes - on BTF subroutine if there is a reception delay between N-1 and N byte */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + /* Do nothing */ } } } @@ -5922,16 +6018,22 @@ static void I2C_Master_ADDR(I2C_HandleTypeDef *hi2c) { if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP)) { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - /* Enable Pos */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); } else { /* Enable Acknowledge */ SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); } if (((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) && ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP) || (CurrentXferOptions == I2C_LAST_FRAME))) @@ -5939,9 +6041,6 @@ static void I2C_Master_ADDR(I2C_HandleTypeDef *hi2c) /* Enable Last DMA bit */ SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); } else { @@ -7063,25 +7162,19 @@ static void I2C_DMAError(DMA_HandleTypeDef *hdma) hi2c->hdmarx->XferCpltCallback = NULL; } - /* Ignore DMA FIFO error */ - if (HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - hi2c->XferCount = 0U; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + hi2c->XferCount = 0U; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; #if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); + hi2c->ErrorCallback(hi2c); #else - HAL_I2C_ErrorCallback(hi2c); + HAL_I2C_ErrorCallback(hi2c); #endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } } /** @@ -7522,3 +7615,4 @@ static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2s.c similarity index 86% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2s.c index 700a0ca..281962e 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2s.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_i2s.c + * @file stm32f1xx_hal_i2s.c * @author MCD Application Team * @brief I2S HAL module driver. * This file provides firmware functions to manage the following @@ -8,17 +8,6 @@ * + Initialization and de-initialization functions * + IO operation functions * + Peripheral State and Errors functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim =============================================================================== ##### How to use this driver ##### @@ -52,10 +41,12 @@ -@- The specific I2S interrupts (Transmission complete interrupt, RXNE interrupt and Error Interrupts) will be managed using the macros __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + -@- The I2SxCLK source is the system clock (provided by the HSI, the HSE or the PLL, and sourcing the AHB clock). + For connectivity line devices, the I2SxCLK source can be either SYSCLK or the PLL3 VCO (2 x PLL3CLK) clock + in order to achieve the maximum accuracy. -@- Make sure that either: - (+@) I2S PLL clock is configured or (+@) External clock source is configured after setting correctly - the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file. + the define constant HSE_VALUE in the stm32f1xx_hal_conf.h file. (#) Three mode of operations are available within this driver : @@ -131,7 +122,6 @@ Function HAL_I2S_RegisterCallback() allows to register following callbacks: (++) TxCpltCallback : I2S Tx Completed callback (++) RxCpltCallback : I2S Rx Completed callback - (++) TxRxCpltCallback : I2S TxRx Completed callback (++) TxHalfCpltCallback : I2S Tx Half Completed callback (++) RxHalfCpltCallback : I2S Rx Half Completed callback (++) ErrorCallback : I2S Error callback @@ -148,7 +138,6 @@ This function allows to reset following callbacks: (++) TxCpltCallback : I2S Tx Completed callback (++) RxCpltCallback : I2S Rx Completed callback - (++) TxRxCpltCallback : I2S TxRx Completed callback (++) TxHalfCpltCallback : I2S Tx Half Completed callback (++) RxHalfCpltCallback : I2S Rx Half Completed callback (++) ErrorCallback : I2S Error callback @@ -179,16 +168,34 @@ not defined, the callback registering feature is not available and weak (surcharged) callbacks are used. - @endverbatim + *** I2S Workarounds linked to Silicon Limitation *** + ==================================================== + [..] + (@) Only the 16-bit mode with no data extension can be used when the I2S + is in Master and used the PCM long synchronization mode. + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" #ifdef HAL_I2S_MODULE_ENABLED -/** @addtogroup STM32F4xx_HAL_Driver +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -213,7 +220,6 @@ static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); static void I2S_DMAError(DMA_HandleTypeDef *hdma); static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); -static void I2S_IRQHandler(I2S_HandleTypeDef *hi2s); static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, uint32_t Timeout); /** @@ -247,7 +253,6 @@ static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, (++) MCLK Output (++) Audio frequency (++) Polarity - (++) Full duplex mode (+) Call the function HAL_I2S_DeInit() to restore the default configuration of the selected I2Sx peripheral. @@ -269,9 +274,6 @@ HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) uint32_t packetlength; uint32_t tmp; uint32_t i2sclk; -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - uint16_t tmpreg; -#endif /* Check the I2S handle allocation */ if (hi2s == NULL) @@ -287,28 +289,18 @@ HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); - assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource)); if (hi2s->State == HAL_I2S_STATE_RESET) { /* Allocate lock resource and initialize it */ hi2s->Lock = HAL_UNLOCKED; - /* Initialize Default I2S IrqHandler ISR */ - hi2s->IrqHandlerISR = I2S_IRQHandler; - #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) /* Init the I2S Callback settings */ hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - hi2s->TxRxCpltCallback = HAL_I2SEx_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - hi2s->TxRxHalfCpltCallback = HAL_I2SEx_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ if (hi2s->MspInitCallback == NULL) @@ -357,19 +349,21 @@ HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) } /* Get the source clock value **********************************************/ -#if defined(I2S_APB1_APB2_FEATURE) - if (IS_I2S_APB1_INSTANCE(hi2s->Instance)) + if (hi2s->Instance == SPI2) { - i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S_APB1); + /* Get the source clock value: based on SPI2 Instance */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S2); + } + else if (hi2s->Instance == SPI3) + { + /* Get the source clock value: based on SPI3 Instance */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S3); } else { - i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S_APB2); + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCC_GetSysClockFreq(); } -#else - i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S); -#endif /* I2S_APB1_APB2_FEATURE */ - /* Compute the Real divider depending on the MCLK output state, with a floating point */ if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) { @@ -439,47 +433,6 @@ HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) } #endif /* SPI_I2SCFGR_ASTRTEN */ -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - - /* Configure the I2S extended if the full duplex mode is enabled */ - assert_param(IS_I2S_FULLDUPLEX_MODE(hi2s->Init.FullDuplexMode)); - - if (hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE) - { - /* Set FullDuplex I2S IrqHandler ISR if FULLDUPLEXMODE is enabled */ - hi2s->IrqHandlerISR = HAL_I2SEx_FullDuplex_IRQHandler; - - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - CLEAR_BIT(I2SxEXT(hi2s->Instance)->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ - SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ - SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); - I2SxEXT(hi2s->Instance)->I2SPR = 2U; - - /* Get the I2SCFGR register value */ - tmpreg = I2SxEXT(hi2s->Instance)->I2SCFGR; - - /* Get the mode to be configured for the extended I2S */ - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - tmp = I2S_MODE_SLAVE_RX; - } - else /* I2S_MODE_MASTER_RX || I2S_MODE_SLAVE_RX */ - { - tmp = I2S_MODE_SLAVE_TX; - } - - /* Configure the I2S Slave with the I2S Master parameter values */ - tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | \ - (uint16_t)tmp | \ - (uint16_t)hi2s->Init.Standard | \ - (uint16_t)hi2s->Init.DataFormat | \ - (uint16_t)hi2s->Init.CPOL); - - /* Write to SPIx I2SCFGR */ - WRITE_REG(I2SxEXT(hi2s->Instance)->I2SCFGR, tmpreg); - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; hi2s->State = HAL_I2S_STATE_READY; @@ -599,12 +552,6 @@ HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_Call hi2s->RxCpltCallback = pCallback; break; -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_COMPLETE_CB_ID : - hi2s->TxRxCpltCallback = pCallback; - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - case HAL_I2S_TX_HALF_COMPLETE_CB_ID : hi2s->TxHalfCpltCallback = pCallback; break; @@ -613,12 +560,6 @@ HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_Call hi2s->RxHalfCpltCallback = pCallback; break; -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID : - hi2s->TxRxHalfCpltCallback = pCallback; - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - case HAL_I2S_ERROR_CB_ID : hi2s->ErrorCallback = pCallback; break; @@ -702,12 +643,6 @@ HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_Ca hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ break; -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_COMPLETE_CB_ID : - hi2s->TxRxCpltCallback = HAL_I2SEx_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - case HAL_I2S_TX_HALF_COMPLETE_CB_ID : hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ break; @@ -716,12 +651,6 @@ HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_Ca hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ break; -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID : - hi2s->TxRxHalfCpltCallback = HAL_I2SEx_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - case HAL_I2S_ERROR_CB_ID : hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ break; @@ -1381,14 +1310,6 @@ HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) /* Disable the I2S DMA Rx request */ CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - else if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Pause the audio file playing by disabling the I2S DMA request */ - CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ else { /* nothing to do */ @@ -1421,21 +1342,6 @@ HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) /* Enable the I2S DMA Rx request */ SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - else if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Pause the audio file playing by disabling the I2S DMA request */ - SET_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - SET_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - - /* If the I2Sext peripheral is still not enabled, enable it */ - if ((I2SxEXT(hi2s->Instance)->I2SCFGR & SPI_I2SCFGR_I2SE) == 0U) - { - /* Enable I2Sext peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - } - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ else { /* nothing to do */ @@ -1462,9 +1368,6 @@ HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) */ HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) { -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - uint32_t tickstart; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ HAL_StatusTypeDef errorcode = HAL_OK; /* The Lock is not implemented on this API to allow the user application to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() @@ -1512,46 +1415,6 @@ HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) /* Disable the I2S Tx DMA requests */ CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Abort the I2S DMA rx Stream/Channel */ - if (hi2s->hdmarx != NULL) - { - /* Disable the I2S DMA rx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Disable I2Sext peripheral */ - __HAL_I2SEXT_DISABLE(hi2s); - - /* Clear OVR flag */ - __HAL_I2SEXT_CLEAR_OVRFLAG(hi2s); - - /* Disable the I2SxEXT DMA request */ - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN); - - if (hi2s->Init.Mode == I2S_MODE_SLAVE_TX) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_BUSY_LINE_RX); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - else - { - /* Read DR to Flush RX Data */ - READ_REG(I2SxEXT(hi2s->Instance)->DR); - } - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ } else if ((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX)) @@ -1566,61 +1429,6 @@ HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) errorcode = HAL_ERROR; } } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Abort the I2S DMA tx Stream/Channel */ - if (hi2s->hdmatx != NULL) - { - /* Disable the I2S DMA tx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - tickstart = HAL_GetTick(); - - /* Wait until TXE flag is set */ - while (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_TXE) != SET) - { - if (((HAL_GetTick() - tickstart) > I2S_TIMEOUT_FLAG)) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - } - - /* Wait until BSY flag is Reset */ - while (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_BSY) != RESET) - { - if (((HAL_GetTick() - tickstart) > I2S_TIMEOUT_FLAG)) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - } - - /* Disable I2Sext peripheral */ - __HAL_I2SEXT_DISABLE(hi2s); - - /* Clear UDR flag */ - __HAL_I2SEXT_CLEAR_UDRFLAG(hi2s); - - /* Disable the I2SxEXT DMA request */ - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN); - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ /* Disable I2S peripheral */ __HAL_I2S_DISABLE(hi2s); @@ -1660,8 +1468,57 @@ HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) */ void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) { - /* Call the IrqHandler ISR set during HAL_I2S_INIT */ - hi2s->IrqHandlerISR(hi2s); + uint32_t itsource = hi2s->Instance->CR2; + uint32_t itflag = hi2s->Instance->SR; + + /* I2S in mode Receiver ------------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) == RESET) && + (I2S_CHECK_FLAG(itflag, I2S_FLAG_RXNE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_RXNE) != RESET)) + { + I2S_Receive_IT(hi2s); + return; + } + + /* I2S in mode Tramitter -----------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_TXE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_TXE) != RESET)) + { + I2S_Transmit_IT(hi2s); + return; + } + + /* I2S interrupt error -------------------------------------------------*/ + if (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_ERR) != RESET) + { + /* I2S Overrun error interrupt occurred ---------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) != RESET) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_UDR) != RESET) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } } /** @@ -1967,80 +1824,6 @@ static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) } } -/** - * @brief This function handles I2S interrupt request. - * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -static void I2S_IRQHandler(I2S_HandleTypeDef *hi2s) -{ - __IO uint32_t i2ssr = hi2s->Instance->SR; - - if (hi2s->State == HAL_I2S_STATE_BUSY_RX) - { - /* I2S in mode Receiver ------------------------------------------------*/ - if (((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE) != RESET)) - { - I2S_Receive_IT(hi2s); - } - - /* I2S Overrun error interrupt occurred -------------------------------------*/ - if (((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET)) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX) - { - /* I2S in mode Transmitter -----------------------------------------------*/ - if (((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE) != RESET)) - { - I2S_Transmit_IT(hi2s); - } - - /* I2S Underrun error interrupt occurred --------------------------------*/ - if (((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET)) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Clear Underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - /** * @brief This function handles I2S Communication Timeout. * @param hi2s pointer to a I2S_HandleTypeDef structure that contains @@ -2089,6 +1872,8 @@ static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, /** * @} */ +#endif /* SPI_I2S_SUPPORT */ #endif /* HAL_I2S_MODULE_ENABLED */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_irda.c similarity index 96% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_irda.c index 57c52c4..6766e5a 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_irda.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_irda.c + * @file stm32f1xx_hal_irda.c * @author MCD Application Team * @brief IRDA HAL module driver. * This file provides firmware functions to manage the following @@ -9,18 +9,6 @@ * + IO operation functions * + Peripheral Control functions * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -40,12 +28,12 @@ (+++) Enable the NVIC USART IRQ handle. (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() and HAL_IRDA_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Declare a DMA handle structure for the Tx/Rx channel. (+++) Enable the DMAx interface clock. (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx stream. + (+++) Configure the DMA Tx/Rx channel. (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx stream. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. (+++) Configure the IRDAx interrupt priority and enable the NVIC USART IRQ handle (used for last byte sending completion detection in DMA non circular mode) @@ -123,8 +111,8 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function HAL_IRDA_RegisterCallback() to register a user callback. - Function HAL_IRDA_RegisterCallback() allows to register following callbacks: + Use Function @ref HAL_IRDA_RegisterCallback() to register a user callback. + Function @ref HAL_IRDA_RegisterCallback() allows to register following callbacks: (+) TxHalfCpltCallback : Tx Half Complete Callback. (+) TxCpltCallback : Tx Complete Callback. (+) RxHalfCpltCallback : Rx Half Complete Callback. @@ -139,9 +127,9 @@ and a pointer to the user callback function. [..] - Use function HAL_IRDA_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_IRDA_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. - HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, + @ref HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxHalfCpltCallback : Tx Half Complete Callback. @@ -156,13 +144,13 @@ (+) MspDeInitCallback : IRDA MspDeInit. [..] - By default, after the HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET + By default, after the @ref HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET all callbacks are set to the corresponding weak (surcharged) functions: - examples HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxHalfCpltCallback(). + examples @ref HAL_IRDA_TxCpltCallback(), @ref HAL_IRDA_RxHalfCpltCallback(). Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_IRDA_Init() - and HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_IRDA_Init() and HAL_IRDA_DeInit() + reset to the legacy weak (surcharged) functions in the @ref HAL_IRDA_Init() + and @ref HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_IRDA_Init() and @ref HAL_IRDA_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand). [..] @@ -171,8 +159,8 @@ in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_IRDA_RegisterCallback() before calling HAL_IRDA_DeInit() - or HAL_IRDA_Init() function. + using @ref HAL_IRDA_RegisterCallback() before calling @ref HAL_IRDA_DeInit() + or @ref HAL_IRDA_Init() function. [..] When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or @@ -197,12 +185,23 @@ | 1 | 1 | | SB | 8 bit data | PB | 1 STB | | +-------------------------------------------------------------+ ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -768,9 +767,9 @@ HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRD * @param Timeout Specify timeout value. * @retval HAL status */ -HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) { - const uint16_t *tmp; + uint16_t *tmp; uint32_t tickstart = 0U; /* Check that a Tx process is not already ongoing */ @@ -801,7 +800,7 @@ HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pD { return HAL_TIMEOUT; } - tmp = (const uint16_t *) pData; + tmp = (uint16_t *) pData; hirda->Instance->DR = (*tmp & (uint16_t)0x01FF); if (hirda->Init.Parity == IRDA_PARITY_NONE) { @@ -943,7 +942,7 @@ HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, ui * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ -HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) { /* Check that a Tx process is not already ongoing */ if (hirda->gState == HAL_IRDA_STATE_READY) @@ -1011,16 +1010,8 @@ HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, /* Process Unlocked */ __HAL_UNLOCK(hirda); - if (hirda->Init.Parity != IRDA_PARITY_NONE) - { - /* Enable the IRDA Parity Error and Data Register Not Empty Interrupts */ - SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - } - else - { - /* Enable the IRDA Data Register Not Empty Interrupts */ - SET_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE); - } + /* Enable the IRDA Parity Error and Data Register Not Empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); /* Enable the IRDA Error Interrupt: (Frame error, Noise error, Overrun error) */ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); @@ -1044,9 +1035,9 @@ HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ -HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) { - const uint32_t *tmp; + uint32_t *tmp; /* Check that a Tx process is not already ongoing */ if (hirda->gState == HAL_IRDA_STATE_READY) @@ -1078,9 +1069,9 @@ HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t /* Set the DMA abort callback */ hirda->hdmatx->XferAbortCallback = NULL; - /* Enable the IRDA transmit DMA stream */ - tmp = (const uint32_t *)&pData; - HAL_DMA_Start_IT(hirda->hdmatx, *(const uint32_t *)tmp, (uint32_t)&hirda->Instance->DR, Size); + /* Enable the IRDA transmit DMA channel */ + tmp = (uint32_t *)&pData; + HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t *)tmp, (uint32_t)&hirda->Instance->DR, Size); /* Clear the TC flag in the SR register by writing 0 to it */ __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_FLAG_TC); @@ -1145,7 +1136,7 @@ HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData /* Set the DMA abort callback */ hirda->hdmarx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ tmp = (uint32_t *)&pData; HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->DR, *(uint32_t *)tmp, Size); @@ -1155,11 +1146,8 @@ HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData /* Process Unlocked */ __HAL_UNLOCK(hirda); - if (hirda->Init.Parity != IRDA_PARITY_NONE) - { - /* Enable the IRDA Parity Error Interrupt */ - SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); - } + /* Enable the IRDA Parity Error Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); /* Enable the IRDA Error Interrupt: (Frame error, Noise error, Overrun error) */ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); @@ -1236,10 +1224,7 @@ HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) __HAL_IRDA_CLEAR_OREFLAG(hirda); /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ - if (hirda->Init.Parity != IRDA_PARITY_NONE) - { - SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); - } + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); /* Enable the IRDA DMA Rx request */ @@ -2093,7 +2078,7 @@ static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) { IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* DMA Normal mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { hirda->TxXferCount = 0U; @@ -2147,7 +2132,7 @@ static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* DMA Normal mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { hirda->RxXferCount = 0U; @@ -2230,12 +2215,11 @@ static void IRDA_DMAError(DMA_HandleTypeDef *hdma) } /** - * @brief This function handles IRDA Communication Timeout. It waits - * until a flag is no longer in the specified status. + * @brief This function handles IRDA Communication Timeout. * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA. * @param Flag specifies the IRDA flag to check. - * @param Status The actual Flag status (SET or RESET). + * @param Status The new Flag status (SET or RESET). * @param Tickstart Tick start value * @param Timeout Timeout duration * @retval HAL status @@ -2467,14 +2451,14 @@ static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) */ static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) { - const uint16_t *tmp; + uint16_t *tmp; /* Check that a Tx process is ongoing */ if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) { if (hirda->Init.WordLength == IRDA_WORDLENGTH_9B) { - tmp = (const uint16_t *) hirda->pTxBuffPtr; + tmp = (uint16_t *) hirda->pTxBuffPtr; hirda->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); if (hirda->Init.Parity == IRDA_PARITY_NONE) { @@ -2646,25 +2630,11 @@ static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda) CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE)); /*-------------------------- USART BRR Configuration -----------------------*/ -#if defined(USART6) && defined(UART9) && defined(UART10) - if ((hirda->Instance == USART1) || (hirda->Instance == USART6) || (hirda->Instance == UART9) || (hirda->Instance == UART10)) - { - pclk = HAL_RCC_GetPCLK2Freq(); - SET_BIT(hirda->Instance->BRR, IRDA_BRR(pclk, hirda->Init.BaudRate)); - } -#elif defined(USART6) - if((hirda->Instance == USART1) || (hirda->Instance == USART6)) - { - pclk = HAL_RCC_GetPCLK2Freq(); - SET_BIT(hirda->Instance->BRR, IRDA_BRR(pclk, hirda->Init.BaudRate)); - } -#else if(hirda->Instance == USART1) { pclk = HAL_RCC_GetPCLK2Freq(); SET_BIT(hirda->Instance->BRR, IRDA_BRR(pclk, hirda->Init.BaudRate)); } -#endif /* USART6 */ else { pclk = HAL_RCC_GetPCLK1Freq(); @@ -2685,3 +2655,4 @@ static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c similarity index 93% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c index c01eb29..5a658e9 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_iwdg.c + * @file stm32f1xx_hal_iwdg.c * @author MCD Application Team * @brief IWDG HAL module driver. * This file provides firmware functions to manage the following @@ -8,17 +8,6 @@ * + Initialization and Start functions * + IO operation functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### IWDG Generic features ##### @@ -51,7 +40,7 @@ [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s The IWDG timeout may vary due to LSI clock frequency dispersion. - STM32F4xx devices provide the capability to measure the LSI clock + STM32F1xx devices provide the capability to measure the LSI clock frequency (LSI clock is internally connected to TIM5 CH4 input capture). The measured value can be used to have an IWDG timeout with an acceptable accuracy. @@ -91,12 +80,24 @@ the reload register @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -118,7 +119,7 @@ the LSI_VALUE constant. The value of this constant can be changed by the user to take into account possible LSI clock period variations. The timeout value is multiplied by 1000 to be converted in milliseconds. - LSI startup time is also considered here by adding LSI_STARTUP_TIME + LSI startup time is also considered here by adding LSI_STARTUP_TIMEOUT converted in milliseconds. */ #define HAL_IWDG_DEFAULT_TIMEOUT (((6UL * 256UL * 1000UL) / LSI_VALUE) + ((LSI_STARTUP_TIME / 1000UL) + 1UL)) #define IWDG_KERNEL_UPDATE_FLAGS (IWDG_SR_RVU | IWDG_SR_PVU) @@ -260,3 +261,5 @@ HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_mmc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c similarity index 86% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_mmc.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c index 466eab5..46e47df 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_mmc.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_mmc.c + * @file stm32f1xx_hal_mmc.c * @author MCD Application Team * @brief MMC card HAL module driver. * This file provides firmware functions to manage the following @@ -10,17 +10,6 @@ * + Peripheral Control functions * + MMC card Control functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -74,7 +63,7 @@ SDMMC Peripheral (STM32 side) and the MMC Card, and put it into StandBy State (Ready for data transfer). This function provide the following operations: - (#) Initialize the SDMMC peripheral interface with default configuration. + (#) Initialize the SDMMC peripheral interface with defaullt configuration. The initialization process is done at 400KHz. You can change or adapt this frequency by adjusting the "ClockDiv" field. The MMC Card frequency (SDMMC_CK) is computed as follows: @@ -206,7 +195,7 @@ The compilation define USE_HAL_MMC_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_MMC_RegisterCallback() to register a user callback, + Use Functions @ref HAL_MMC_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) TxCpltCallback : callback when a transmission transfer is completed. (+) RxCpltCallback : callback when a reception transfer is completed. @@ -217,7 +206,7 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_MMC_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_MMC_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) TxCpltCallback : callback when a transmission transfer is completed. (+) RxCpltCallback : callback when a reception transfer is completed. @@ -227,12 +216,12 @@ (+) MspDeInitCallback : MMC MspDeInit. This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_MMC_Init and if the state is HAL_MMC_STATE_RESET + By default, after the @ref HAL_MMC_Init and if the state is HAL_MMC_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_MMC_Init - and HAL_MMC_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_MMC_Init and HAL_MMC_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_MMC_Init + and @ref HAL_MMC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_MMC_Init and @ref HAL_MMC_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -240,8 +229,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_MMC_RegisterCallback before calling HAL_MMC_DeInit - or HAL_MMC_Init function. + using @ref HAL_MMC_RegisterCallback before calling @ref HAL_MMC_DeInit + or @ref HAL_MMC_Init function. When The compilation define USE_HAL_MMC_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -249,12 +238,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -272,30 +272,7 @@ /** @addtogroup MMC_Private_Defines * @{ */ -#if defined (VDD_VALUE) && (VDD_VALUE <= 1950U) -#define MMC_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE -#define MMC_EXT_CSD_PWR_CL_26_INDEX 201 -#define MMC_EXT_CSD_PWR_CL_52_INDEX 200 -#define MMC_EXT_CSD_PWR_CL_DDR_52_INDEX 238 - -#define MMC_EXT_CSD_PWR_CL_26_POS 8 -#define MMC_EXT_CSD_PWR_CL_52_POS 0 -#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 16 -#else -#define MMC_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE - -#define MMC_EXT_CSD_PWR_CL_26_INDEX 203 -#define MMC_EXT_CSD_PWR_CL_52_INDEX 202 -#define MMC_EXT_CSD_PWR_CL_DDR_52_INDEX 239 - -#define MMC_EXT_CSD_PWR_CL_26_POS 24 -#define MMC_EXT_CSD_PWR_CL_52_POS 16 -#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 24 -#endif - -/* Frequencies used in the driver for clock divider calculation */ -#define MMC_INIT_FREQ 400000U /* Initialization phase : 400 kHz max */ /** * @} */ @@ -319,7 +296,6 @@ static void MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma); static void MMC_DMAError(DMA_HandleTypeDef *hdma); static void MMC_DMATxAbort(DMA_HandleTypeDef *hdma); static void MMC_DMARxAbort(DMA_HandleTypeDef *hdma); -static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide); /** * @} */ @@ -399,7 +375,7 @@ HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc) } /* Initialize the error code */ - hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->ErrorCode = HAL_DMA_ERROR_NONE; /* Initialize the MMC operation */ hmmc->Context = MMC_CONTEXT_NONE; @@ -407,15 +383,6 @@ HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc) /* Initialize the MMC state */ hmmc->State = HAL_MMC_STATE_READY; - /* Configure bus width */ - if (hmmc->Init.BusWide != SDIO_BUS_WIDE_1B) - { - if (HAL_MMC_ConfigWideBusOperation(hmmc, hmmc->Init.BusWide) != HAL_OK) - { - return HAL_ERROR; - } - } - return HAL_OK; } @@ -460,9 +427,6 @@ HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc) /* Enable MMC Clock */ __HAL_MMC_ENABLE(hmmc); - /* Required power up waiting time before starting the MMC initialization sequence */ - HAL_Delay(2); - /* Identify card operating voltage */ errorstate = MMC_PowerON(hmmc); if(errorstate != HAL_MMC_ERROR_NONE) @@ -667,11 +631,7 @@ HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, ui /* Poll on SDIO flags */ dataremaining = config.DataLength; -#if defined(SDIO_STA_STBITERR) while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) -#endif /* SDIO_STA_STBITERR */ { if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF) && (dataremaining > 0U)) { @@ -872,11 +832,7 @@ HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, u /* Write block(s) in polling mode */ dataremaining = config.DataLength; -#if defined(SDIO_STA_STBITERR) while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) -#endif /* SDIO_STA_STBITERR */ { if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXFIFOHE) && (dataremaining > 0U)) { @@ -1011,11 +967,7 @@ HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, hmmc->pRxBuffPtr = pData; hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; -#if defined(SDIO_STA_STBITERR) - __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF)); -#endif /* SDIO_STA_STBITERR */ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) { @@ -1108,11 +1060,7 @@ HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; /* Enable transfer interrupts */ -#if defined(SDIO_STA_STBITERR) - __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE)); -#endif /* SDIO_STA_STBITERR */ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) { @@ -1187,7 +1135,7 @@ HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData if(hmmc->State == HAL_MMC_STATE_READY) { - hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->ErrorCode = HAL_DMA_ERROR_NONE; if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) { @@ -1200,11 +1148,7 @@ HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData /* Initialize data control register */ hmmc->Instance->DCTRL = 0U; -#if defined(SDIO_STA_STBITERR) - __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND)); -#endif /* SDIO_STA_STBITERR */ /* Set the DMA transfer complete callback */ hmmc->hdmarx->XferCpltCallback = MMC_DMAReceiveCplt; @@ -1222,7 +1166,7 @@ HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData /* Force DMA Direction */ hmmc->hdmarx->Init.Direction = DMA_PERIPH_TO_MEMORY; - MODIFY_REG(hmmc->hdmarx->Instance->CR, DMA_SxCR_DIR, hmmc->hdmarx->Init.Direction); + MODIFY_REG(hmmc->hdmarx->Instance->CCR, DMA_CCR_DIR, hmmc->hdmarx->Init.Direction); /* Enable the DMA Channel */ if(HAL_DMA_Start_IT(hmmc->hdmarx, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)pData, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK) @@ -1322,11 +1266,7 @@ HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pDat hmmc->Instance->DCTRL = 0U; /* Enable MMC Error interrupts */ -#if defined(SDIO_STA_STBITERR) - __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR)); -#endif /* SDIO_STA_STBITERR */ /* Set the DMA transfer complete callback */ hmmc->hdmatx->XferCpltCallback = MMC_DMATransmitCplt; @@ -1373,7 +1313,7 @@ HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pDat /* Force DMA Direction */ hmmc->hdmatx->Init.Direction = DMA_MEMORY_TO_PERIPH; - MODIFY_REG(hmmc->hdmatx->Instance->CR, DMA_SxCR_DIR, hmmc->hdmatx->Init.Direction); + MODIFY_REG(hmmc->hdmatx->Instance->CCR, DMA_CCR_DIR, hmmc->hdmatx->Init.Direction); /* Enable the DMA Channel */ if(HAL_DMA_Start_IT(hmmc->hdmatx, (uint32_t)pData, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK) @@ -1525,14 +1465,8 @@ void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc) { __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_FLAG_DATAEND); -#if defined(SDIO_STA_STBITERR) __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ - SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR); -#else /* SDIO_STA_STBITERR not defined */ - __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT |\ - SDIO_IT_TXUNDERR | SDIO_IT_RXOVERR | SDIO_IT_TXFIFOHE |\ - SDIO_IT_RXFIFOHF); -#endif /* SDIO_STA_STBITERR */ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); hmmc->Instance->DCTRL &= ~(SDIO_DCTRL_DTEN); @@ -1615,11 +1549,7 @@ void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc) MMC_Write_IT(hmmc); } -#if defined(SDIO_STA_STBITERR) - else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR | SDIO_FLAG_STBITERR) != RESET) -#else /* SDIO_STA_STBITERR not defined */ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR) != RESET) -#endif /* SDIO_STA_STBITERR */ { /* Set Error code */ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL) != RESET) @@ -1638,28 +1568,13 @@ void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc) { hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; } -#if defined(SDIO_STA_STBITERR) - if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_STBITERR) != RESET) - { - hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; - } -#endif /* SDIO_STA_STBITERR */ -#if defined(SDIO_STA_STBITERR) /* Clear All flags */ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS | SDIO_FLAG_STBITERR); /* Disable all interrupts */ __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR); -#else /* SDIO_STA_STBITERR */ - /* Clear All flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS); - - /* Disable all interrupts */ - __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ - SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); -#endif /* SDIO_STA_STBITERR */ hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance); @@ -2164,122 +2079,6 @@ HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoT return HAL_OK; } -/** - * @brief Returns information the information of the card which are stored on - * the Extended CSD register. - * @param hmmc Pointer to MMC handle - * @param pExtCSD Pointer to a memory area (512 bytes) that contains all - * Extended CSD register parameters - * @param Timeout Specify timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout) -{ - SDIO_DataInitTypeDef config; - uint32_t errorstate; - uint32_t tickstart = HAL_GetTick(); - uint32_t count; - uint32_t *tmp_buf; - - if(NULL == pExtCSD) - { - hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; - return HAL_ERROR; - } - - if(hmmc->State == HAL_MMC_STATE_READY) - { - hmmc->ErrorCode = HAL_MMC_ERROR_NONE; - - hmmc->State = HAL_MMC_STATE_BUSY; - - /* Initialize data control register */ - hmmc->Instance->DCTRL = 0; - - /* Initiaize the destination pointer */ - tmp_buf = pExtCSD; - - /* Configure the MMC DPSM (Data Path State Machine) */ - config.DataTimeOut = SDMMC_DATATIMEOUT; - config.DataLength = 512; - config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; - config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; - config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - config.DPSM = SDIO_DPSM_ENABLE; - (void)SDIO_ConfigData(hmmc->Instance, &config); - - /* Send ExtCSD Read command to Card */ - errorstate = SDMMC_CmdSendEXTCSD(hmmc->Instance, 0); - if(errorstate != HAL_MMC_ERROR_NONE) - { - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS); - hmmc->ErrorCode |= errorstate; - hmmc->State = HAL_MMC_STATE_READY; - return HAL_ERROR; - } - - /* Poll on SDMMC flags */ - while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) - { - if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF)) - { - /* Read data from SDMMC Rx FIFO */ - for(count = 0U; count < 8U; count++) - { - *tmp_buf = SDIO_ReadFIFO(hmmc->Instance); - tmp_buf++; - } - } - - if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U)) - { - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS); - hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; - hmmc->State= HAL_MMC_STATE_READY; - return HAL_TIMEOUT; - } - } - - /* Get error state */ - if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT)) - { - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS); - hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; - hmmc->State = HAL_MMC_STATE_READY; - return HAL_ERROR; - } - else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL)) - { - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS); - hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; - hmmc->State = HAL_MMC_STATE_READY; - return HAL_ERROR; - } - else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR)) - { - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS); - hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; - hmmc->State = HAL_MMC_STATE_READY; - return HAL_ERROR; - } - else - { - /* Nothing to do */ - } - - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS); - hmmc->State = HAL_MMC_STATE_READY; - } - - return HAL_OK; -} - /** * @brief Enables wide bus operation for the requested card if supported by * card. @@ -2293,10 +2092,10 @@ HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtC */ HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode) { - uint32_t count; + __IO uint32_t count = 0U; SDIO_InitTypeDef Init; uint32_t errorstate; - uint32_t response = 0U; + uint32_t response = 0U, busy = 0U; /* Check the parameters */ assert_param(IS_SDIO_BUS_WIDE(WideMode)); @@ -2304,84 +2103,116 @@ HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32 /* Change State */ hmmc->State = HAL_MMC_STATE_BUSY; - errorstate = MMC_PwrClassUpdate(hmmc, WideMode); + /* Update Clock for Bus mode update */ + Init.ClockEdge = SDIO_CLOCK_EDGE_RISING; + Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE; + Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE; + Init.BusWide = WideMode; + Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE; + Init.ClockDiv = SDIO_INIT_CLK_DIV; + /* Initialize SDIO*/ + (void)SDIO_Init(hmmc->Instance, Init); - if(errorstate == HAL_MMC_ERROR_NONE) + if(WideMode == SDIO_BUS_WIDE_8B) { - if(WideMode == SDIO_BUS_WIDE_8B) + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U); + if(errorstate != HAL_MMC_ERROR_NONE) { - errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U); + hmmc->ErrorCode |= errorstate; } - else if(WideMode == SDIO_BUS_WIDE_4B) + } + else if(WideMode == SDIO_BUS_WIDE_4B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U); + if(errorstate != HAL_MMC_ERROR_NONE) { - errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U); + hmmc->ErrorCode |= errorstate; } - else if(WideMode == SDIO_BUS_WIDE_1B) + } + else if(WideMode == SDIO_BUS_WIDE_1B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70000U); + if(errorstate != HAL_MMC_ERROR_NONE) { - errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70000U); + hmmc->ErrorCode |= errorstate; } - else + } + else + { + /* WideMode is not a valid argument*/ + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + } + + /* Check for switch error and violation of the trial number of sending CMD 13 */ + while(busy == 0U) + { + if(count == SDMMC_MAX_TRIAL) { - /* WideMode is not a valid argument*/ - errorstate = HAL_MMC_ERROR_PARAM; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + return HAL_ERROR; + } + count++; + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if(errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; } - /* Check for switch error and violation of the trial number of sending CMD 13 */ - if(errorstate == HAL_MMC_ERROR_NONE) - { - /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ - count = SDMMC_MAX_TRIAL; - do - { - errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); - if(errorstate != HAL_MMC_ERROR_NONE) - { - break; - } - - /* Get command response */ - response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1); - count--; - }while(((response & 0x100U) == 0U) && (count != 0U)); + /* Get command response */ + response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1); - /* Check the status after the switch command execution */ - if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) - { - /* Check the bit SWITCH_ERROR of the device status */ - if ((response & 0x80U) != 0U) - { - errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; - } - else - { - /* Configure the SDIO peripheral */ - Init = hmmc->Init; - Init.BusWide = WideMode; - (void)SDIO_Init(hmmc->Instance, Init); - } - } - else if (count == 0U) - { - errorstate = SDMMC_ERROR_TIMEOUT; - } - else - { - /* Nothing to do */ - } + /* Get operating voltage*/ + busy = (((response >> 7U) == 1U) ? 0U : 1U); + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_DATATIMEOUT; + while((response & 0x00000100U) == 0U) + { + if(count == 0U) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + return HAL_ERROR; } + count--; + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if(errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + /* Get command response */ + response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1); + } + + if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS); + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Configure the SDIO peripheral */ + Init.ClockEdge = hmmc->Init.ClockEdge; + Init.ClockBypass = hmmc->Init.ClockBypass; + Init.ClockPowerSave = hmmc->Init.ClockPowerSave; + Init.BusWide = WideMode; + Init.HardwareFlowControl = hmmc->Init.HardwareFlowControl; + Init.ClockDiv = hmmc->Init.ClockDiv; + (void)SDIO_Init(hmmc->Instance, Init); } /* Change State */ hmmc->State = HAL_MMC_STATE_READY; - if(errorstate != HAL_MMC_ERROR_NONE) - { - /* Clear all the static flags */ - __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); - hmmc->ErrorCode |= errorstate; - return HAL_ERROR; - } - return HAL_OK; } @@ -2611,9 +2442,6 @@ static void MMC_DMAError(DMA_HandleTypeDef *hdma) HAL_MMC_CardStateTypeDef CardState; uint32_t RxErrorCode, TxErrorCode; - /* if DMA error is FIFO error ignore it */ - if(HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) - { RxErrorCode = hmmc->hdmarx->ErrorCode; TxErrorCode = hmmc->hdmatx->ErrorCode; if((RxErrorCode == HAL_DMA_ERROR_TE) || (TxErrorCode == HAL_DMA_ERROR_TE)) @@ -2640,7 +2468,6 @@ static void MMC_DMAError(DMA_HandleTypeDef *hdma) #else HAL_MMC_ErrorCallback(hmmc); #endif - } } /** @@ -2742,8 +2569,7 @@ static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc) { HAL_MMC_CardCSDTypeDef CSD; uint32_t errorstate; - uint16_t mmc_rca = 2U; - MMC_InitTypeDef Init; + uint16_t mmc_rca = 1U; /* Check the power State */ if(SDIO_GetPowerState(hmmc->Instance) == 0U) @@ -2767,9 +2593,9 @@ static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc) hmmc->CID[3U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP4); } - /* Send CMD3 SET_REL_ADDR with RCA = 2 (should be greater than 1) */ + /* Send CMD3 SET_REL_ADDR with argument 0 */ /* MMC Card publishes its RCA. */ - errorstate = SDMMC_CmdSetRelAddMmc(hmmc->Instance, mmc_rca); + errorstate = SDMMC_CmdSetRelAdd(hmmc->Instance, &mmc_rca); if(errorstate != HAL_MMC_ERROR_NONE) { return errorstate; @@ -2796,6 +2622,12 @@ static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc) /* Get the Card Class */ hmmc->MmcCard.Class = (SDIO_GetResponse(hmmc->Instance, SDIO_RESP2) >> 20U); + /* Get CSD parameters */ + if (HAL_MMC_GetCardCSD(hmmc, &CSD) != HAL_OK) + { + return hmmc->ErrorCode; + } + /* Select the Card */ errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); if(errorstate != HAL_MMC_ERROR_NONE) @@ -2803,36 +2635,8 @@ static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc) return errorstate; } - /* Get CSD parameters */ - if (HAL_MMC_GetCardCSD(hmmc, &CSD) != HAL_OK) - { - return hmmc->ErrorCode; - } - - /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ - errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); - if(errorstate != HAL_MMC_ERROR_NONE) - { - hmmc->ErrorCode |= errorstate; - } - - /* Get Extended CSD parameters */ - if (HAL_MMC_GetCardExtCSD(hmmc, hmmc->Ext_CSD, SDMMC_DATATIMEOUT) != HAL_OK) - { - return hmmc->ErrorCode; - } - - /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ - errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); - if(errorstate != HAL_MMC_ERROR_NONE) - { - hmmc->ErrorCode |= errorstate; - } - - /* Configure the SDIO peripheral */ - Init = hmmc->Init; - Init.BusWide = SDIO_BUS_WIDE_1B; - (void)SDIO_Init(hmmc->Instance, Init); + /* Configure SDIO peripheral interface */ + (void)SDIO_Init(hmmc->Instance, hmmc->Init); /* All cards are initialized */ return HAL_MMC_ERROR_NONE; @@ -2865,8 +2669,8 @@ static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc) return HAL_MMC_ERROR_INVALID_VOLTRANGE; } - /* SEND CMD1 APP_CMD with voltage range as argument */ - errorstate = SDMMC_CmdOpCondition(hmmc->Instance, MMC_VOLTAGE_RANGE); + /* SEND CMD1 APP_CMD with MMC_HIGH_VOLTAGE_RANGE(0xC0FF8000) as argument */ + errorstate = SDMMC_CmdOpCondition(hmmc->Instance, eMMC_HIGH_VOLTAGE_RANGE); if(errorstate != HAL_MMC_ERROR_NONE) { return HAL_MMC_ERROR_UNSUPPORTED_FEATURE; @@ -3097,93 +2901,6 @@ static void MMC_Write_IT(MMC_HandleTypeDef *hmmc) } } -/** - * @brief Update the power class of the device. - * @param hmmc MMC handle - * @param Wide Wide of MMC bus - * @param Speed Speed of the MMC bus - * @retval MMC Card error state - */ -static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide) -{ - uint32_t count; - uint32_t response = 0U; - uint32_t errorstate = HAL_MMC_ERROR_NONE; - uint32_t power_class, supported_pwr_class; - - if((Wide == SDIO_BUS_WIDE_8B) || (Wide == SDIO_BUS_WIDE_4B)) - { - power_class = 0U; /* Default value after power-on or software reset */ - - /* Read the PowerClass field of the Extended CSD register */ - if(MMC_ReadExtCSD(hmmc, &power_class, 187, SDMMC_DATATIMEOUT) != HAL_OK) /* Field POWER_CLASS [187] */ - { - errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; - } - else - { - power_class = ((power_class >> 24U) & 0x000000FFU); - } - - /* Get the supported PowerClass field of the Extended CSD register */ - /* Field PWR_CL_26_xxx [201 or 203] */ - supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_26_INDEX/4)] >> MMC_EXT_CSD_PWR_CL_26_POS) & 0x000000FFU); - - if(errorstate == HAL_MMC_ERROR_NONE) - { - if(Wide == SDIO_BUS_WIDE_8B) - { - /* Bit [7:4] : power class for 8-bits bus configuration - Bit [3:0] : power class for 4-bits bus configuration */ - supported_pwr_class = (supported_pwr_class >> 4U); - } - - if ((power_class & 0x0FU) != (supported_pwr_class & 0x0FU)) - { - /* Need to change current power class */ - errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03BB0000U | ((supported_pwr_class & 0x0FU) << 8U))); - - if(errorstate == HAL_MMC_ERROR_NONE) - { - /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ - count = SDMMC_MAX_TRIAL; - do - { - errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); - if(errorstate != HAL_MMC_ERROR_NONE) - { - break; - } - - /* Get command response */ - response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1); - count--; - }while(((response & 0x100U) == 0U) && (count != 0U)); - - /* Check the status after the switch command execution */ - if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) - { - /* Check the bit SWITCH_ERROR of the device status */ - if ((response & 0x80U) != 0U) - { - errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; - } - } - else if (count == 0U) - { - errorstate = SDMMC_ERROR_TIMEOUT; - } - else - { - /* Nothing to do */ - } - } - } - } - } - - return errorstate; -} - /** * @} */ @@ -3199,3 +2916,5 @@ static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_msp_template.c similarity index 50% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_msp_template.c index 82de111..a28b5cf 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_msp_template.c @@ -1,31 +1,32 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_msp_template.c + * @file stm32f1xx_hal_msp_template.c * @author MCD Application Team - * @brief This file contains the HAL System and Peripheral (PPP) MSP initialization - * and de-initialization functions. - * It should be copied to the application folder and renamed into 'stm32f4xx_hal_msp.c'. + * @brief HAL BSP module. + * This file template is located in the HAL folder and should be copied + * to the user folder. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ -/** @defgroup HAL_MSP HAL MSP +/** @defgroup HAL_MSP HAL_MSP * @brief HAL MSP module. * @{ */ @@ -37,14 +38,12 @@ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ -/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions +/** @defgroup HAL_MSP_Exported_Functions HAL MSP Exported Functions * @{ */ /** * @brief Initializes the Global MSP. - * @note This function is called from HAL_Init() function to perform system - * level initialization (GPIOs, clock, DMA, interrupt). * @retval None */ void HAL_MspInit(void) @@ -54,8 +53,6 @@ void HAL_MspInit(void) /** * @brief DeInitializes the Global MSP. - * @note This functiona is called from HAL_DeInit() function to perform system - * level de-initialization (GPIOs, clock, DMA, interrupt). * @retval None */ void HAL_MspDeInit(void) @@ -65,8 +62,6 @@ void HAL_MspDeInit(void) /** * @brief Initializes the PPP MSP. - * @note This functiona is called from HAL_PPP_Init() function to perform - * peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt) * @retval None */ void HAL_PPP_MspInit(void) @@ -76,8 +71,6 @@ void HAL_PPP_MspInit(void) /** * @brief DeInitializes the PPP MSP. - * @note This functiona is called from HAL_PPP_DeInit() function to perform - * peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt) * @retval None */ void HAL_PPP_MspDeInit(void) @@ -97,4 +90,4 @@ void HAL_PPP_MspDeInit(void) * @} */ - +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nand.c similarity index 92% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nand.c index a0b89e6..1e6b4ba 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nand.c @@ -1,29 +1,18 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_nand.c + * @file stm32f1xx_hal_nand.c * @author MCD Application Team * @brief NAND HAL module driver. * This file provides a generic firmware to drive NAND memories mounted * as external device. * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This driver is a generic layered driver which contains a set of APIs used to - control NAND flash memories. It uses the FMC/FSMC layer functions to interface + control NAND flash memories. It uses the FSMC layer functions to interface with NAND devices. This driver is used as follows: (+) NAND flash memory configuration sequence using the function HAL_NAND_Init() @@ -69,25 +58,25 @@ The compilation define USE_HAL_NAND_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_NAND_RegisterCallback() to register a user callback, + Use Functions @ref HAL_NAND_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) MspInitCallback : NAND MspInit. (+) MspDeInitCallback : NAND MspDeInit. This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_NAND_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_NAND_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) MspInitCallback : NAND MspInit. (+) MspDeInitCallback : NAND MspDeInit. This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_NAND_Init and if the state is HAL_NAND_STATE_RESET + By default, after the @ref HAL_NAND_Init and if the state is HAL_NAND_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_NAND_Init - and HAL_NAND_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_NAND_Init and HAL_NAND_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_NAND_Init + and @ref HAL_NAND_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_NAND_Init and @ref HAL_NAND_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -95,8 +84,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_NAND_RegisterCallback before calling HAL_NAND_DeInit - or HAL_NAND_Init function. + using @ref HAL_NAND_RegisterCallback before calling @ref HAL_NAND_DeInit + or @ref HAL_NAND_Init function. When The compilation define USE_HAL_NAND_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -104,14 +93,25 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -156,8 +156,8 @@ * @param AttSpace_Timing pointer to Attribute space timing structure * @retval HAL status */ -HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, - FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing) +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FSMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, + FSMC_NAND_PCC_TimingTypeDef *AttSpace_Timing) { /* Check the NAND handle state */ if (hnand == NULL) @@ -186,20 +186,16 @@ HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingT } /* Initialize NAND control Interface */ - (void)FMC_NAND_Init(hnand->Instance, &(hnand->Init)); + (void)FSMC_NAND_Init(hnand->Instance, &(hnand->Init)); /* Initialize NAND common space timing Interface */ - (void)FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank); + (void)FSMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank); /* Initialize NAND attribute space timing Interface */ - (void)FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank); + (void)FSMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank); /* Enable the NAND device */ -#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) - __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank); -#else - __FMC_NAND_ENABLE(hnand->Instance); -#endif + __FSMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank); /* Update the NAND controller state */ hnand->State = HAL_NAND_STATE_READY; @@ -229,7 +225,7 @@ HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand) #endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ /* Configure the NAND registers with their reset values */ - (void)FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank); + (void)FSMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank); /* Reset the NAND controller state */ hnand->State = HAL_NAND_STATE_RESET; @@ -282,7 +278,7 @@ __weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand) void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) { /* Check NAND interrupt Rising edge flag */ - if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE)) + if (__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_RISING_EDGE)) { /* NAND interrupt callback*/ #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) @@ -292,15 +288,11 @@ void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) #endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ /* Clear NAND interrupt Rising edge pending bit */ -#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE); -#else - __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_RISING_EDGE); -#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + __FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_RISING_EDGE); } /* Check NAND interrupt Level flag */ - if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL)) + if (__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_LEVEL)) { /* NAND interrupt callback*/ #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) @@ -310,15 +302,11 @@ void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) #endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ /* Clear NAND interrupt Level pending bit */ -#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL); -#else - __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_LEVEL); -#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + __FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_LEVEL); } /* Check NAND interrupt Falling edge flag */ - if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE)) + if (__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FALLING_EDGE)) { /* NAND interrupt callback*/ #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) @@ -328,15 +316,11 @@ void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) #endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ /* Clear NAND interrupt Falling edge pending bit */ -#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE); -#else - __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FALLING_EDGE); -#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + __FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FALLING_EDGE); } /* Check NAND interrupt FIFO empty flag */ - if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT)) + if (__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FEMPT)) { /* NAND interrupt callback*/ #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) @@ -346,11 +330,7 @@ void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) #endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ /* Clear NAND interrupt FIFO empty pending bit */ -#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT); -#else - __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FEMPT); -#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + __FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FEMPT); } } @@ -417,8 +397,7 @@ HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pN hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -426,9 +405,6 @@ HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pN { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* Send Read ID command sequence */ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID; @@ -437,11 +413,7 @@ HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pN __DSB(); /* Read the electronic signature from NAND flash */ -#ifdef FSMC_PCR2_PWID if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) -#else /* FMC_PCR2_PWID is defined */ - if (hnand->Init.MemoryDataWidth == FMC_NAND_PCC_MEM_BUS_WIDTH_8) -#endif { data = *(__IO uint32_t *)deviceaddress; @@ -501,8 +473,7 @@ HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand) hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -510,9 +481,6 @@ HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand) { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* Send NAND reset command */ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF; @@ -586,8 +554,7 @@ HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressT hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -595,9 +562,6 @@ HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressT { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -755,8 +719,7 @@ HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_Address hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -764,9 +727,6 @@ HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_Address { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -859,11 +819,7 @@ HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_Address } /* Calculate PageSize */ -#if defined(FSMC_PCR2_PWID) - if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) -#else - if (hnand->Init.MemoryDataWidth == FMC_NAND_PCC_MEM_BUS_WIDTH_8) -#endif /* FSMC_PCR2_PWID */ + if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) { hnand->Config.PageSize = hnand->Config.PageSize / 2U; } @@ -938,8 +894,7 @@ HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_Address hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -947,9 +902,6 @@ HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_Address { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -1102,8 +1054,7 @@ HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_Addres hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -1111,9 +1062,6 @@ HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_Addres { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -1180,11 +1128,7 @@ HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_Addres } /* Calculate PageSize */ -#if defined(FSMC_PCR2_PWID) - if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) -#else - if (hnand->Init.MemoryDataWidth == FMC_NAND_PCC_MEM_BUS_WIDTH_8) -#endif /* FSMC_PCR2_PWID */ + if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) { hnand->Config.PageSize = hnand->Config.PageSize / 2U; } @@ -1282,8 +1226,7 @@ HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_Add hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -1291,9 +1234,6 @@ HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_Add { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -1458,8 +1398,7 @@ HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_Ad hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -1467,9 +1406,6 @@ HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_Ad { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -1634,8 +1570,7 @@ HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_Ad hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -1643,9 +1578,6 @@ HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_Ad { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* Page address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -1808,8 +1740,7 @@ HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_A hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -1817,9 +1748,6 @@ HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_A { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* NAND raw address calculation */ nandaddress = ARRAY_ADDRESS(pAddress, hnand); @@ -1972,8 +1900,7 @@ HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTy hnand->State = HAL_NAND_STATE_BUSY; /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -1981,9 +1908,6 @@ HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTy { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* Send Erase block command sequence */ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0; @@ -2225,7 +2149,7 @@ HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand) hnand->State = HAL_NAND_STATE_BUSY; /* Enable ECC feature */ - (void)FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank); + (void)FSMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank); /* Update the NAND state */ hnand->State = HAL_NAND_STATE_READY; @@ -2239,7 +2163,7 @@ HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand) } /** - * @brief Disables dynamically FMC_NAND ECC feature. + * @brief Disables dynamically FSMC_NAND ECC feature. * @param hnand pointer to a NAND_HandleTypeDef structure that contains * the configuration information for NAND module. * @retval HAL status @@ -2257,7 +2181,7 @@ HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand) hnand->State = HAL_NAND_STATE_BUSY; /* Disable ECC feature */ - (void)FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank); + (void)FSMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank); /* Update the NAND state */ hnand->State = HAL_NAND_STATE_READY; @@ -2293,7 +2217,7 @@ HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, hnand->State = HAL_NAND_STATE_BUSY; /* Get NAND ECC value */ - status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout); + status = FSMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout); /* Update the NAND state */ hnand->State = HAL_NAND_STATE_READY; @@ -2350,8 +2274,7 @@ uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand) UNUSED(hnand); /* Identify the device address */ -#if defined(FMC_Bank2_3) - if (hnand->Init.NandBank == FMC_NAND_BANK2) + if (hnand->Init.NandBank == FSMC_NAND_BANK2) { deviceaddress = NAND_DEVICE1; } @@ -2359,9 +2282,6 @@ uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand) { deviceaddress = NAND_DEVICE2; } -#else - deviceaddress = NAND_DEVICE; -#endif /* Send Read status operation command */ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS; @@ -2402,4 +2322,6 @@ uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand) * @} */ -#endif /* FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nor.c similarity index 89% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nor.c index 0a82044..ad2d82c 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nor.c @@ -1,29 +1,18 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_nor.c + * @file stm32f1xx_hal_nor.c * @author MCD Application Team * @brief NOR HAL module driver. * This file provides a generic firmware to drive NOR memories mounted * as external device. * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This driver is a generic layered driver which contains a set of APIs used to - control NOR flash memories. It uses the FMC/FSMC layer functions to interface + control NOR flash memories. It uses the FSMC layer functions to interface with NOR devices. This driver is used as follows: (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() @@ -66,25 +55,25 @@ The compilation define USE_HAL_NOR_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_NOR_RegisterCallback() to register a user callback, + Use Functions @ref HAL_NOR_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) MspInitCallback : NOR MspInit. (+) MspDeInitCallback : NOR MspDeInit. This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_NOR_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_NOR_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) MspInitCallback : NOR MspInit. (+) MspDeInitCallback : NOR MspDeInit. This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET + By default, after the @ref HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_NOR_Init - and HAL_NOR_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_NOR_Init and HAL_NOR_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_NOR_Init + and @ref HAL_NOR_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_NOR_Init and @ref HAL_NOR_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -92,8 +81,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_NOR_RegisterCallback before calling HAL_NOR_DeInit - or HAL_NOR_Init function. + using @ref HAL_NOR_RegisterCallback before calling @ref HAL_NOR_DeInit + or @ref HAL_NOR_Init function. When The compilation define USE_HAL_NOR_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -101,14 +90,25 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -#if defined(FMC_Bank1) || defined(FSMC_Bank1) +#if defined(FSMC_BANK1) -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -226,11 +226,10 @@ static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B; * @param ExtTiming pointer to NOR extended mode timing structure * @retval HAL status */ -HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, - FMC_NORSRAM_TimingTypeDef *ExtTiming) +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FSMC_NORSRAM_TimingTypeDef *Timing, + FSMC_NORSRAM_TimingTypeDef *ExtTiming) { uint32_t deviceaddress; - HAL_StatusTypeDef status = HAL_OK; /* Check the NOR handle parameter */ if (hnor == NULL) @@ -258,19 +257,19 @@ HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDe } /* Initialize NOR control Interface */ - (void)FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init)); + (void)FSMC_NORSRAM_Init(hnor->Instance, &(hnor->Init)); /* Initialize NOR timing Interface */ - (void)FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); + (void)FSMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); /* Initialize NOR extended mode timing Interface */ - (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode); + (void)FSMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode); /* Enable the NORSRAM device */ - __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank); + __FSMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank); /* Initialize NOR Memory Data Width*/ - if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8) + if (hnor->Init.MemoryDataWidth == FSMC_NORSRAM_MEM_BUS_WIDTH_8) { uwNORMemoryDataWidth = NOR_MEMORY_8B; } @@ -283,40 +282,28 @@ HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDe hnor->State = HAL_NOR_STATE_READY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } - if (hnor->Init.WriteOperation == FMC_WRITE_OPERATION_DISABLE) - { - (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + /* Get the value of the command set */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET); - /* Update the NOR controller state */ - hnor->State = HAL_NOR_STATE_PROTECTED; - } - else - { - /* Get the value of the command set */ - NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); - hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET); - - status = HAL_NOR_ReturnToReadMode(hnor); - } - - return status; + return HAL_NOR_ReturnToReadMode(hnor); } /** @@ -341,7 +328,7 @@ HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor) #endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ /* Configure the NOR registers with their reset values */ - (void)FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank); + (void)FSMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank); /* Reset the NOR controller state */ hnor->State = HAL_NOR_STATE_RESET; @@ -439,11 +426,7 @@ HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_I { return HAL_BUSY; } - else if (state == HAL_NOR_STATE_PROTECTED) - { - return HAL_ERROR; - } - else if (state == HAL_NOR_STATE_READY) + else if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_PROTECTED)) { /* Process Locked */ __HAL_LOCK(hnor); @@ -452,19 +435,19 @@ HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_I hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -530,11 +513,7 @@ HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor) { return HAL_BUSY; } - else if (state == HAL_NOR_STATE_PROTECTED) - { - return HAL_ERROR; - } - else if (state == HAL_NOR_STATE_READY) + else if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_PROTECTED)) { /* Process Locked */ __HAL_LOCK(hnor); @@ -543,19 +522,19 @@ HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor) hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -608,11 +587,7 @@ HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint { return HAL_BUSY; } - else if (state == HAL_NOR_STATE_PROTECTED) - { - return HAL_ERROR; - } - else if (state == HAL_NOR_STATE_READY) + else if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_PROTECTED)) { /* Process Locked */ __HAL_LOCK(hnor); @@ -621,19 +596,19 @@ HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -702,19 +677,19 @@ HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, u hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -781,11 +756,7 @@ HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress { return HAL_BUSY; } - else if (state == HAL_NOR_STATE_PROTECTED) - { - return HAL_ERROR; - } - else if (state == HAL_NOR_STATE_READY) + else if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_PROTECTED)) { /* Process Locked */ __HAL_LOCK(hnor); @@ -794,19 +765,19 @@ HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -886,19 +857,19 @@ HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddr hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -992,19 +963,19 @@ HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAdd hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -1077,19 +1048,19 @@ HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address) hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -1145,11 +1116,7 @@ HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR { return HAL_BUSY; } - else if (state == HAL_NOR_STATE_PROTECTED) - { - return HAL_ERROR; - } - else if (state == HAL_NOR_STATE_READY) + else if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_PROTECTED)) { /* Process Locked */ __HAL_LOCK(hnor); @@ -1158,19 +1125,19 @@ HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR hnor->State = HAL_NOR_STATE_BUSY; /* Select the NOR device address */ - if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) { deviceaddress = NOR_MEMORY_ADRESS1; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) { deviceaddress = NOR_MEMORY_ADRESS2; } - else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) { deviceaddress = NOR_MEMORY_ADRESS3; } - else /* FMC_NORSRAM_BANK4 */ + else /* FSMC_NORSRAM_BANK4 */ { deviceaddress = NOR_MEMORY_ADRESS4; } @@ -1336,7 +1303,7 @@ HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor) hnor->State = HAL_NOR_STATE_BUSY; /* Enable write operation */ - (void)FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); + (void)FSMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); /* Update the NOR controller state */ hnor->State = HAL_NOR_STATE_READY; @@ -1370,7 +1337,7 @@ HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor) hnor->State = HAL_NOR_STATE_BUSY; /* Disable write operation */ - (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + (void)FSMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); /* Update the NOR controller state */ hnor->State = HAL_NOR_STATE_PROTECTED; @@ -1540,4 +1507,6 @@ HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Addres * @} */ -#endif /* FMC_Bank1 || FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pccard.c similarity index 91% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pccard.c index 14deb47..2556d81 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pccard.c @@ -1,29 +1,18 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_pccard.c + * @file stm32f1xx_hal_pccard.c * @author MCD Application Team * @brief PCCARD HAL module driver. * This file provides a generic firmware to drive PCCARD memories mounted * as external device. * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim =============================================================================== ##### How to use this driver ##### =============================================================================== [..] This driver is a generic layered driver which contains a set of APIs used to - control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions + control PCCARD/compact flash memories. It uses the FSMC layer functions to interface with PCCARD devices. This driver is used for: (+) PCCARD/Compact Flash memory configuration sequence using the function @@ -61,25 +50,25 @@ The compilation define USE_HAL_PCCARD_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_PCCARD_RegisterCallback() to register a user callback, + Use Functions @ref HAL_PCCARD_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) MspInitCallback : PCCARD MspInit. (+) MspDeInitCallback : PCCARD MspDeInit. This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_PCCARD_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_PCCARD_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) MspInitCallback : PCCARD MspInit. (+) MspDeInitCallback : PCCARD MspDeInit. This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_PCCARD_Init and if the state is HAL_PCCARD_STATE_RESET + By default, after the @ref HAL_PCCARD_Init and if the state is HAL_PCCARD_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_PCCARD_Init - and HAL_PCCARD_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_PCCARD_Init and HAL_PCCARD_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_PCCARD_Init + and @ref HAL_PCCARD_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_PCCARD_Init and @ref HAL_PCCARD_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -87,8 +76,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_PCCARD_RegisterCallback before calling HAL_PCCARD_DeInit - or HAL_PCCARD_Init function. + using @ref HAL_PCCARD_RegisterCallback before calling @ref HAL_PCCARD_DeInit + or @ref HAL_PCCARD_Init function. When The compilation define USE_HAL_PCCARD_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -96,14 +85,25 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -#if defined(FMC_Bank4) || defined(FSMC_Bank4) +#if defined(FSMC_BANK4) -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -162,8 +162,8 @@ * @param IOSpaceTiming IO space timing structure * @retval HAL status */ -HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, - FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming) +HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FSMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, + FSMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FSMC_NAND_PCC_TimingTypeDef *IOSpaceTiming) { /* Check the PCCARD controller state */ if (hpccard == NULL) @@ -194,19 +194,19 @@ HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_Ti hpccard->State = HAL_PCCARD_STATE_BUSY; /* Initialize PCCARD control Interface */ - FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init)); + FSMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init)); /* Init PCCARD common space timing Interface */ - FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming); + FSMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming); /* Init PCCARD attribute space timing Interface */ - FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming); + FSMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming); /* Init PCCARD IO space timing Interface */ - FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming); + FSMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming); /* Enable the PCCARD device */ - __FMC_PCCARD_ENABLE(hpccard->Instance); + __FSMC_PCCARD_ENABLE(hpccard->Instance); /* Update the PCCARD state */ hpccard->State = HAL_PCCARD_STATE_READY; @@ -237,7 +237,7 @@ HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard) #endif /* Configure the PCCARD registers with their reset values */ - FMC_PCCARD_DeInit(hpccard->Instance); + FSMC_PCCARD_DeInit(hpccard->Instance); /* Update the PCCARD controller state */ hpccard->State = HAL_PCCARD_STATE_RESET; @@ -617,7 +617,7 @@ HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard) void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard) { /* Check PCCARD interrupt Rising edge flag */ - if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE)) + if (__FSMC_PCCARD_GET_FLAG(hpccard->Instance, FSMC_FLAG_RISING_EDGE)) { /* PCCARD interrupt callback*/ #if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) @@ -627,11 +627,11 @@ void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard) #endif /* Clear PCCARD interrupt Rising edge pending bit */ - __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE); + __FSMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FSMC_FLAG_RISING_EDGE); } /* Check PCCARD interrupt Level flag */ - if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL)) + if (__FSMC_PCCARD_GET_FLAG(hpccard->Instance, FSMC_FLAG_LEVEL)) { /* PCCARD interrupt callback*/ #if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) @@ -641,11 +641,11 @@ void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard) #endif /* Clear PCCARD interrupt Level pending bit */ - __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL); + __FSMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FSMC_FLAG_LEVEL); } /* Check PCCARD interrupt Falling edge flag */ - if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE)) + if (__FSMC_PCCARD_GET_FLAG(hpccard->Instance, FSMC_FLAG_FALLING_EDGE)) { /* PCCARD interrupt callback*/ #if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) @@ -655,11 +655,11 @@ void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard) #endif /* Clear PCCARD interrupt Falling edge pending bit */ - __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE); + __FSMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FSMC_FLAG_FALLING_EDGE); } /* Check PCCARD interrupt FIFO empty flag */ - if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT)) + if (__FSMC_PCCARD_GET_FLAG(hpccard->Instance, FSMC_FLAG_FEMPT)) { /* PCCARD interrupt callback*/ #if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) @@ -669,7 +669,7 @@ void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard) #endif /* Clear PCCARD interrupt FIFO empty pending bit */ - __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT); + __FSMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FSMC_FLAG_FEMPT); } } @@ -943,4 +943,6 @@ HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard) * @} */ -#endif /* FMC_Bank4 || FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c similarity index 71% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c index 7e46592..fc1645c 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_pcd.c + * @file stm32f1xx_hal_pcd.c * @author MCD Application Team * @brief PCD HAL module driver. * This file provides firmware functions to manage the following @@ -10,17 +10,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -37,8 +26,7 @@ (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: (##) Enable the PCD/USB Low Level interface clock using - (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) + (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral (##) Initialize the related GPIO clocks (##) Configure PCD pin-out @@ -52,12 +40,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -68,7 +67,7 @@ #ifdef HAL_PCD_MODULE_ENABLED -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB) || defined (USB_OTG_FS) /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ @@ -87,11 +86,17 @@ /** @defgroup PCD_Private_Functions PCD Private Functions * @{ */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +#endif /* defined (USB) */ /** * @} */ @@ -122,7 +127,9 @@ static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint */ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) { +#if defined (USB_OTG_FS) USB_OTG_GlobalTypeDef *USBx; +#endif /* defined (USB_OTG_FS) */ uint8_t i; /* Check the PCD handle allocation */ @@ -134,7 +141,9 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) /* Check the parameters */ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); +#if defined (USB_OTG_FS) USBx = hpcd->Instance; +#endif /* defined (USB_OTG_FS) */ if (hpcd->State == HAL_PCD_STATE_RESET) { @@ -153,8 +162,6 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; if (hpcd->MspInitCallback == NULL) { @@ -171,11 +178,13 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) hpcd->State = HAL_PCD_STATE_BUSY; +#if defined (USB_OTG_FS) /* Disable DMA mode for FS instance */ if ((USBx->CID & (0x1U << 8)) == 0U) { hpcd->Init.dma_enable = 0U; } +#endif /* defined (USB_OTG_FS) */ /* Disable the Interrupts */ __HAL_PCD_DISABLE(hpcd); @@ -224,13 +233,6 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) hpcd->USB_Address = 0U; hpcd->State = HAL_PCD_STATE_READY; -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Activate LPM */ - if (hpcd->Init.lpm_enable == 1U) - { - (void)HAL_PCDEx_ActivateLPM(hpcd); - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ (void)USB_DevDisconnect(hpcd->Instance); return HAL_OK; @@ -422,7 +424,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, /** * @brief Unregister an USB PCD Callback - * USB PCD callback is redirected to the weak predefined callback + * USB PCD callabck is redirected to the weak predefined callback * @param hpcd USB PCD handle * @param CallbackID ID of the callback to be unregistered * This parameter can be one of the following values: @@ -827,151 +829,6 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) return status; } -/** - * @brief Register USB PCD BCD Callback - * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD BCD Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD BCD Callback - * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD LPM Callback - * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD LPM Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD LPM Callback - * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ /** @@ -1000,18 +857,13 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) */ HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) { - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - __HAL_LOCK(hpcd); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Enable USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } - __HAL_PCD_ENABLE(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 1U); +#endif /* defined (USB) */ + (void)USB_DevConnect(hpcd->Instance); __HAL_UNLOCK(hpcd); @@ -1025,27 +877,25 @@ HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) */ HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) { - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - __HAL_LOCK(hpcd); __HAL_PCD_DISABLE(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 0U); +#endif /* defined (USB) */ + (void)USB_DevDisconnect(hpcd->Instance); +#if defined (USB_OTG_FS) (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Disable USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } +#endif /* defined (USB_OTG_FS) */ __HAL_UNLOCK(hpcd); return HAL_OK; } -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) /** * @brief Handles PCD interrupt request. * @param hpcd PCD handle @@ -1061,7 +911,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) uint32_t epint; uint32_t epnum; uint32_t fifoemptymsk; - uint32_t RegVal; + uint32_t temp; /* ensure that we are in device mode */ if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) @@ -1072,9 +922,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) return; } - /* store current frame number */ - hpcd->FrameNumber = (USBx_DEVICE->DSTS & USB_OTG_DSTS_FNSOF_Msk) >> USB_OTG_DSTS_FNSOF_Pos; - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) { /* incorrect mode, acknowledge the interrupt */ @@ -1086,31 +933,30 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) { USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); - RegVal = USBx->GRXSTSP; + temp = USBx->GRXSTSP; - ep = &hpcd->OUT_ep[RegVal & USB_OTG_GRXSTSP_EPNUM]; + ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM]; - if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) { - if ((RegVal & USB_OTG_GRXSTSP_BCNT) != 0U) + if ((temp & USB_OTG_GRXSTSP_BCNT) != 0U) { (void)USB_ReadPacket(USBx, ep->xfer_buff, - (uint16_t)((RegVal & USB_OTG_GRXSTSP_BCNT) >> 4)); + (uint16_t)((temp & USB_OTG_GRXSTSP_BCNT) >> 4)); - ep->xfer_buff += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; - ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; } } - else if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) { (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); - ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; } else { /* ... */ } - USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); } @@ -1145,30 +991,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); } - /* Clear OUT Endpoint disable interrupt */ - if ((epint & USB_OTG_DOEPINT_EPDISD) == USB_OTG_DOEPINT_EPDISD) - { - if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == USB_OTG_GINTSTS_BOUTNAKEFF) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK; - } - - ep = &hpcd->OUT_ep[epnum]; - - if (ep->is_iso_incomplete == 1U) - { - ep->is_iso_incomplete = 0U; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_EPDISD); - } - /* Clear Status Phase Received interrupt */ if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) { @@ -1206,18 +1028,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); - if (hpcd->Init.dma_enable == 1U) - { - hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; - - /* this is ZLP, so prepare EP0 for next setup */ - if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U)) - { - /* prepare to rx more setup packets */ - (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); - } - } - #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); #else @@ -1238,21 +1048,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) } if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) { - (void)USB_FlushTxFifo(USBx, epnum); - - ep = &hpcd->IN_ep[epnum]; - - if (ep->is_iso_incomplete == 1U) - { - ep->is_iso_incomplete = 0U; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); } if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) @@ -1271,24 +1066,11 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) /* Clear the Remote Wake-up Signaling */ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; - if (hpcd->LPM_State == LPM_L1) - { - hpcd->LPM_State = LPM_L0; - #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); + hpcd->ResumeCallback(hpcd); #else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); + HAL_PCD_ResumeCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResumeCallback(hpcd); -#else - HAL_PCD_ResumeCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); } @@ -1306,33 +1088,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) } __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); } -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Handle LPM Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT); - - if (hpcd->LPM_State == LPM_L0) - { - hpcd->LPM_State = LPM_L1; - hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >> 2U; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ /* Handle Reset Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) { @@ -1343,6 +1098,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) { USBx_INEP(i)->DIEPINT = 0xFB7FU; USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + USBx_INEP(i)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; USBx_OUTEP(i)->DOEPINT = 0xFB7FU; USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; @@ -1376,8 +1132,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; /* setup EP0 to receive SETUP packets */ - (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, - (uint8_t *)hpcd->Setup); + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); } @@ -1414,37 +1169,18 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); } - /* Handle Global OUT NAK effective Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_BOUTNAKEFF)) - { - USBx->GINTMSK &= ~USB_OTG_GINTMSK_GONAKEFFM; - - for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) - { - if (hpcd->OUT_ep[epnum].is_iso_incomplete == 1U) - { - /* Abort current transaction and disable the EP */ - (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)epnum); - } - } - } - /* Handle Incomplete ISO IN Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) { - for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) - { - RegVal = USBx_INEP(epnum)->DIEPCTL; + /* Keep application checking the corresponding Iso IN endpoint + causing the incomplete Interrupt */ + epnum = 0U; - if ((hpcd->IN_ep[epnum].type == EP_TYPE_ISOC) && - ((RegVal & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)) - { - hpcd->IN_ep[epnum].is_iso_incomplete = 1U; - - /* Abort current transaction and disable the EP */ - (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)(epnum | 0x80U)); - } - } +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); } @@ -1452,25 +1188,15 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) /* Handle Incomplete ISO OUT Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) { - for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) - { - RegVal = USBx_OUTEP(epnum)->DOEPCTL; + /* Keep application checking the corresponding Iso OUT endpoint + causing the incomplete Interrupt */ + epnum = 0U; - if ((hpcd->OUT_ep[epnum].type == EP_TYPE_ISOC) && - ((RegVal & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) && - ((RegVal & (0x1U << 16)) == (hpcd->FrameNumber & 0x1U))) - { - hpcd->OUT_ep[epnum].is_iso_incomplete = 1U; - - USBx->GINTMSK |= USB_OTG_GINTMSK_GONAKEFFM; - - if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == 0U) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SGONAK; - break; - } - } - } +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); } @@ -1490,9 +1216,9 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) /* Handle Disconnection event Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) { - RegVal = hpcd->Instance->GOTGINT; + temp = hpcd->Instance->GOTGINT; - if ((RegVal & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + if ((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) { #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DisconnectCallback(hpcd); @@ -1500,7 +1226,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) HAL_PCD_DisconnectCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } - hpcd->Instance->GOTGINT |= RegVal; + hpcd->Instance->GOTGINT |= temp; } } } @@ -1513,24 +1239,142 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) */ void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) { - USB_OTG_GlobalTypeDef *USBx; + /* Clear EXTI pending Bit */ + __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG(); +} +#endif /* defined (USB_OTG_FS) */ - USBx = hpcd->Instance; +#if defined (USB) +/** + * @brief This function handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + uint16_t store_ep[8]; + uint8_t i; - if ((USBx->CID & (0x1U << 8)) == 0U) + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) { - /* Clear EXTI pending Bit */ - __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG(); + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + (void)PCD_EP_ISR_Handler(hpcd); } - else + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) { - /* Clear EXTI pending Bit */ - __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG(); + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)HAL_PCD_SetAddress(hpcd, 0U); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) + { + hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LP_MODE); + hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) + { + /* WA: To Clear Wakeup flag if raised with suspend signal */ + + /* Store Endpoint register */ + for (i = 0U; i < 8U; i++) + { + store_ep[i] = PCD_GET_ENDPOINT(hpcd->Instance, i); + } + + /* FORCE RESET */ + hpcd->Instance->CNTR |= (uint16_t)(USB_CNTR_FRES); + + /* CLEAR RESET */ + hpcd->Instance->CNTR &= (uint16_t)(~USB_CNTR_FRES); + + /* wait for reset flag in ISTR */ + while ((hpcd->Instance->ISTR & USB_ISTR_RESET) == 0U) + { + } + + /* Clear Reset Flag */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + + /* Restore Registre */ + for (i = 0U; i < 8U; i++) + { + PCD_SET_ENDPOINT(hpcd->Instance, i, store_ep[i]); + } + + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_FSUSP; + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_LP_MODE; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); } } -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @brief Handles PCD Wakeup interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + /* Clear EXTI pending Bit */ + __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG(); +} +#endif /* defined (USB) */ + /** * @brief Data OUT stage callback. * @param hpcd PCD handle @@ -1729,16 +1573,12 @@ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) */ HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) { - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - __HAL_LOCK(hpcd); - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Enable USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 1U); +#endif /* defined (USB) */ + (void)USB_DevConnect(hpcd->Instance); __HAL_UNLOCK(hpcd); @@ -1752,18 +1592,13 @@ HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) */ HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) { - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - __HAL_LOCK(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 0U); +#endif /* defined (USB) */ + (void)USB_DevDisconnect(hpcd->Instance); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Disable USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } - __HAL_UNLOCK(hpcd); return HAL_OK; @@ -1881,18 +1716,13 @@ HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, u ep->is_in = 0U; ep->num = ep_addr & EP_ADDR_MSK; - if (hpcd->Init.dma_enable == 1U) - { - ep->dma_addr = (uint32_t)pBuf; - } - if ((ep_addr & EP_ADDR_MSK) == 0U) { - (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + (void)USB_EP0StartXfer(hpcd->Instance, ep); } else { - (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + (void)USB_EPStartXfer(hpcd->Instance, ep); } return HAL_OK; @@ -1925,22 +1755,21 @@ HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, /*setup and start the Xfer */ ep->xfer_buff = pBuf; ep->xfer_len = len; +#if defined (USB) + ep->xfer_fill_db = 1U; + ep->xfer_len_db = len; +#endif /* defined (USB) */ ep->xfer_count = 0U; ep->is_in = 1U; ep->num = ep_addr & EP_ADDR_MSK; - if (hpcd->Init.dma_enable == 1U) - { - ep->dma_addr = (uint32_t)pBuf; - } - if ((ep_addr & EP_ADDR_MSK) == 0U) { - (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + (void)USB_EP0StartXfer(hpcd->Instance, ep); } else { - (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + (void)USB_EPStartXfer(hpcd->Instance, ep); } return HAL_OK; @@ -1981,7 +1810,7 @@ HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) if ((ep_addr & EP_ADDR_MSK) == 0U) { - (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup); + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); } __HAL_UNLOCK(hpcd); @@ -2025,32 +1854,6 @@ HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) return HAL_OK; } -/** - * @brief Abort an USB EP transaction. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - HAL_StatusTypeDef ret; - PCD_EPTypeDef *ep; - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - } - - /* Stop Xfer */ - ret = USB_EPStopXfer(hpcd->Instance, ep); - - return ret; -} - /** * @brief Flush an endpoint * @param hpcd PCD handle @@ -2124,33 +1927,6 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) return hpcd->State; } -/** - * @brief Set the USB Device high speed test mode. - * @param hpcd PCD handle - * @param testmode USB Device high speed test mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - - switch (testmode) - { - case TEST_J: - case TEST_K: - case TEST_SE0_NAK: - case TEST_PACKET: - case TEST_FORCE_EN: - USBx_DEVICE->DCTL |= (uint32_t)testmode << 4; - break; - - default: - break; - } - - return HAL_OK; -} /** * @} */ @@ -2163,7 +1939,7 @@ HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode) /** @addtogroup PCD_Private_Functions * @{ */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) /** * @brief Check FIFO for the next packet to be loaded. * @param hpcd PCD handle @@ -2207,8 +1983,7 @@ static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t } len32b = (len + 3U) / 4U; - (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len, - (uint8_t)hpcd->Init.dma_enable); + (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len); ep->xfer_buff += len; ep->xfer_count += len; @@ -2232,96 +2007,23 @@ static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t */ static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) { - USB_OTG_EPTypeDef *ep; USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; uint32_t USBx_BASE = (uint32_t)USBx; uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; - if (hpcd->Init.dma_enable == 1U) + if (gSNPSiD == USB_OTG_CORE_ID_310A) { - if ((DoepintReg & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) /* Class C */ + /* StupPktRcvd = 1 this is a setup packet */ + if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) { - /* StupPktRcvd = 1 this is a setup packet */ - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && - ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - } - else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */ - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); - } - else if ((DoepintReg & (USB_OTG_DOEPINT_STUP | USB_OTG_DOEPINT_OTEPSPR)) == 0U) - { - /* StupPktRcvd = 1 this is a setup packet */ - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && - ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - else - { - ep = &hpcd->OUT_ep[epnum]; - - /* out data packet received over EP */ - ep->xfer_count = ep->xfer_size - (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); - - if (epnum == 0U) - { - if (ep->xfer_len == 0U) - { - /* this is ZLP, so prepare EP0 for next setup */ - (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); - } - else - { - ep->xfer_buff += ep->xfer_count; - } - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); } else { - /* ... */ - } - } - else - { - if (gSNPSiD == USB_OTG_CORE_ID_310A) - { - /* StupPktRcvd = 1 this is a setup packet */ - if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) + if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - else - { - if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - else - { - if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U)) - { - /* this is ZLP, so prepare EP0 for next setup */ - (void)USB_EP0_OutStart(hpcd->Instance, 0U, (uint8_t *)hpcd->Setup); + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); } #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) @@ -2331,6 +2033,14 @@ static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } return HAL_OK; } @@ -2362,20 +2072,500 @@ static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint HAL_PCD_SetupStageCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && (hpcd->Init.dma_enable == 1U)) + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep; + uint16_t count, wIstr, wEPVal, TxByteNbre; + uint8_t epindex; + + /* stay in loop while pending interrupts */ + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) { - (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + wIstr = hpcd->Instance->ISTR; + + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); + + if (epindex == 0U) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0U) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, 0U); +#else + HAL_PCD_DataInStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) + { + hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0U; + } + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0U) + { + /* Get SETUP Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + ep->pmaadress, (uint16_t)ep->xfer_count); + + /* SETUP bit kept frozen while CTR_RX = 1 */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else if ((wEPVal & USB_EP_CTR_RX) != 0U) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Get Control Data OUT Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + ep->pmaadress, (uint16_t)ep->xfer_count); + + ep->xfer_buff += ep->xfer_count; + + /* Process Control Data OUT Packet */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, 0U); +#else + HAL_PCD_DataOutStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if ((PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0) & USB_EP_SETUP) == 0U) + { + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + } + else + { + /* Decode and service non control endpoints interrupt */ + /* process related endpoint register */ + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); + + if ((wEPVal & USB_EP_CTR_RX) != 0U) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + ep = &hpcd->OUT_ep[epindex]; + + /* OUT Single Buffering */ + if (ep->doublebuffer == 0U) + { + count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } + else + { + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) + { + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); + } + else /* manage double buffer iso out */ + { + /* free EP OUT Buffer */ + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + { + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + } + } + /* multi-packet on the NON control OUT endpoint */ + ep->xfer_count += count; + ep->xfer_buff += count; + + if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataOutStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + (void) USB_EPStartXfer(hpcd->Instance, ep); + } + + } + + if ((wEPVal & USB_EP_CTR_TX) != 0U) + { + ep = &hpcd->IN_ep[epindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + + /* Manage all non bulk/isoc transaction Bulk Single Buffer Transaction */ + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_CTRL) || + ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } + /* Double Buffer Iso/bulk IN (bulk transfer Len > Ep_Mps) */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + } + } + } } return HAL_OK; } -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @brief Manage double buffer bulk out transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /* Check if Buffer1 is in blocked sate which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + + return count; +} + + +/** + * @brief Manage double buffer bulk IN transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint32_t len; + uint16_t TxByteNbre; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + ep->xfer_fill_db = 0U; + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + } + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + ep->xfer_fill_db = 0; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); + } + } + } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + + return HAL_OK; +} + +#endif /* defined (USB) */ + /** * @} */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ #endif /* HAL_PCD_MODULE_ENABLED */ /** @@ -2385,3 +2575,5 @@ static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c new file mode 100644 index 0000000..42e135c --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB) || defined (USB_OTG_FS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ +#if defined (USB_OTG_FS) +/** + * @brief Set Tx FIFO + * @param hpcd PCD handle + * @param fifo The number of Tx fifo + * @param size Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t i; + uint32_t Tx_Offset; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if (fifo == 0U) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (i = 0U; i < (fifo - 1U); i++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd PCD handle + * @param size Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +/** + * @brief Configure PMA for EP + * @param hpcd Device instance + * @param ep_addr endpoint address + * @param ep_kind endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) +{ + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /* Single Buffer */ + ep->doublebuffer = 0U; + /* Configure the PMA */ + ep->pmaadress = (uint16_t)pmaadress; + } + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + ep->doublebuffer = 1U; + /* Configure the PMA */ + ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); + ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); + } + + return HAL_OK; +} + +/** + * @brief Software Device Connection, + * this function is not required by USB OTG FS peripheral, it is used + * only by USB Device FS peripheral. + * @param hpcd PCD handle + * @param state connection state (0 : disconnected / 1: connected) + * @retval None + */ +__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(state); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PCDEx_SetConnectionState could be implemented in the user file + */ +} +#endif /* defined (USB) */ + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c similarity index 52% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c index b4bb483..3385b81 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c @@ -1,34 +1,37 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_pwr.c + * @file stm32f1xx_hal_pwr.c * @author MCD Application Team * @brief PWR HAL module driver. - * This file provides firmware functions to manage the following + * + * This file provides firmware functions to manage the following * functionalities of the Power Controller (PWR) peripheral: - * + Initialization and de-initialization functions + * + Initialization/de-initialization functions * + Peripheral Control functions - * + * ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** - */ + */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @defgroup PWR PWR - * @brief PWR HAL module driver + * @brief PWR HAL module driver * @{ */ @@ -36,13 +39,14 @@ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ -/** @addtogroup PWR_Private_Constants + +/** @defgroup PWR_Private_Constants PWR Private Constants * @{ */ /** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask * @{ - */ + */ #define PVD_MODE_IT 0x00010000U #define PVD_MODE_EVT 0x00020000U #define PVD_RISING_EDGE 0x00000001U @@ -51,40 +55,102 @@ * @} */ + +/** @defgroup PWR_register_alias_address PWR Register alias address + * @{ + */ +/* ------------- PWR registers bit address in the alias region ---------------*/ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) +#define PWR_CR_OFFSET 0x00U +#define PWR_CSR_OFFSET 0x04U +#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) +#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) /** * @} - */ -/* Private macro -------------------------------------------------------------*/ + */ + +/** @defgroup PWR_CR_register_alias PWR CR Register alias address + * @{ + */ +/* --- CR Register ---*/ +/* Alias word address of LPSDSR bit */ +#define LPSDSR_BIT_NUMBER PWR_CR_LPDS_Pos +#define CR_LPSDSR_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPSDSR_BIT_NUMBER * 4U))) + +/* Alias word address of DBP bit */ +#define DBP_BIT_NUMBER PWR_CR_DBP_Pos +#define CR_DBP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))) + +/* Alias word address of PVDE bit */ +#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos +#define CR_PVDE_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))) + +/** + * @} + */ + +/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address + * @{ + */ + +/* --- CSR Register ---*/ +/* Alias word address of EWUP1 bit */ +#define CSR_EWUP_BB(VAL) ((uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (POSITION_VAL(VAL) * 4U))) +/** + * @} + */ + +/** + * @} + */ + /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ +/** @defgroup PWR_Private_Functions PWR Private Functions + * brief WFE cortex command overloaded for HAL_PWR_EnterSTOPMode usage only (see Workaround section) + * @{ + */ +static void PWR_OverloadWfe(void); + /* Private functions ---------------------------------------------------------*/ +__NOINLINE +static void PWR_OverloadWfe(void) +{ + //__asm volatile( "wfe" ); + //__asm volatile( "nop" ); +} + +/** + * @} + */ + /** @defgroup PWR_Exported_Functions PWR Exported Functions * @{ */ /** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions + * @brief Initialization and de-initialization functions * @verbatim =============================================================================== ##### Initialization and de-initialization functions ##### =============================================================================== [..] - After reset, the backup domain (RTC registers, RTC backup data - registers and backup SRAM) is protected against possible unwanted - write accesses. + After reset, the backup domain (RTC registers, RTC backup data + registers) is protected against possible unwanted + write accesses. To enable access to the RTC Domain and RTC registers, proceed as follows: (+) Enable the Power Controller (PWR) APB1 interface clock using the __HAL_RCC_PWR_CLK_ENABLE() macro. (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. - + @endverbatim * @{ */ /** - * @brief Deinitializes the HAL PWR peripheral registers to their default reset values. + * @brief Deinitializes the PWR peripheral registers to their default reset values. * @retval None */ void HAL_PWR_DeInit(void) @@ -94,43 +160,29 @@ void HAL_PWR_DeInit(void) } /** - * @brief Enables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * @brief Enables access to the backup domain (RTC registers, RTC + * backup data registers ). + * @note If the HSE divided by 128 is used as the RTC clock, the * Backup Domain Access should be kept enabled. - * @note The following sequence is required to bypass the delay between - * DBP bit programming and the effective enabling of the backup domain. - * Please check the Errata Sheet for more details under "Possible delay - * in backup domain protection disabling/enabling after programming the - * DBP bit" section. * @retval None */ void HAL_PWR_EnableBkUpAccess(void) { - __IO uint32_t dummyread; + /* Enable access to RTC and backup registers */ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; - dummyread = PWR->CR; - UNUSED(dummyread); } /** - * @brief Disables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * @brief Disables access to the backup domain (RTC registers, RTC + * backup data registers). + * @note If the HSE divided by 128 is used as the RTC clock, the * Backup Domain Access should be kept enabled. - * @note The following sequence is required to bypass the delay between - * DBP bit programming and the effective disabling of the backup domain. - * Please check the Errata Sheet for more details under "Possible delay - * in backup domain protection disabling/enabling after programming the - * DBP bit" section. * @retval None */ void HAL_PWR_DisableBkUpAccess(void) { - __IO uint32_t dummyread; + /* Disable access to RTC and backup registers */ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; - dummyread = PWR->CR; - UNUSED(dummyread); } /** @@ -138,10 +190,9 @@ void HAL_PWR_DisableBkUpAccess(void) */ /** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @brief Low Power modes configuration functions + * @brief Low Power modes configuration functions * @verbatim - =============================================================================== ##### Peripheral Control functions ##### =============================================================================== @@ -149,117 +200,116 @@ void HAL_PWR_DisableBkUpAccess(void) *** PVD configuration *** ========================= [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a + (+) The PVD is used to monitor the VDD power supply by comparing it to a threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). - (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI + + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI line16 and can generate an interrupt if enabled. This is done through - __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. + __HAL_PVD_EXTI_ENABLE_IT() macro. (+) The PVD is stopped in Standby mode. - *** Wake-up pin configuration *** + *** WakeUp pin configuration *** ================================ [..] - (+) Wake-up pin is used to wake up the system from Standby mode. This pin is + (+) WakeUp pin is used to wake up the system from Standby mode. This pin is forced in input pull-down configuration and is active on rising edges. - (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00. - (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13 - (++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01 + (+) There is one WakeUp pin: + WakeUp Pin 1 on PA.00. + + [..] *** Low Power modes configuration *** ===================================== - [..] - The devices feature 3 low-power modes: - (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running. - (+) Stop mode: all clocks are stopped, regulator running, regulator - in low power mode - (+) Standby mode: 1.2V domain powered off. - + [..] + The device features 3 low-power modes: + (+) Sleep mode: CPU clock off, all peripherals including Cortex-M3 core peripherals like + NVIC, SysTick, etc. are kept running + (+) Stop mode: All clocks are stopped + (+) Standby mode: 1.8V domain powered off + + *** Sleep mode *** ================== [..] (+) Entry: - The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI) + The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) functions with (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - - -@@- The Regulator parameter is not used for the STM32F4 family - and is kept as parameter just to maintain compatibility with the - lower power families (STM32L). + (+) Exit: - Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) can wake up the device from Sleep mode. + (++) WFI entry mode, Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + (++) WFE entry mode, Any wakeup event can wake up the device from Sleep mode. + (+++) Any peripheral interrupt w/o NVIC configuration & SEVONPEND bit set in the Cortex (HAL_PWR_EnableSEVOnPend) + (+++) Any EXTI Line (Internal or External) configured in Event mode *** Stop mode *** ================= [..] - In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, - and the HSE RC oscillators are disabled. Internal SRAM and register contents - are preserved. - The voltage regulator can be configured either in normal or low-power mode. - To minimize the consumption In Stop mode, FLASH can be powered off before - entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function. - It can be switched on again by software after exiting the Stop mode using - the HAL_PWREx_DisableFlashPowerDown() function. + The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral + clock gating. The voltage regulator can be configured either in normal or low-power mode. + In Stop mode, all clocks in the 1.8 V domain are stopped, the PLL, the HSI and the HSE RC + oscillators are disabled. SRAM and register contents are preserved. + In Stop mode, all I/O pins keep the same state as in Run mode. (+) Entry: - The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) + The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_REGULATOR_VALUE, PWR_SLEEPENTRY_WFx ) function with: - (++) Main regulator ON. - (++) Low Power regulator ON. + (++) PWR_REGULATOR_VALUE= PWR_MAINREGULATOR_ON: Main regulator ON. + (++) PWR_REGULATOR_VALUE= PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON. + (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction (+) Exit: - Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + (++) WFI entry mode, Any EXTI Line (Internal or External) configured in Interrupt mode with NVIC configured + (++) WFE entry mode, Any EXTI Line (Internal or External) configured in Event mode. *** Standby mode *** ==================== - [..] - (+) - The Standby mode allows to achieve the lowest power consumption. It is based - on the Cortex-M4 deep sleep mode, with the voltage regulator disabled. - The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and - the HSE oscillator are also switched off. SRAM and register contents are lost - except for the RTC registers, RTC backup registers, backup SRAM and Standby - circuitry. - - The voltage regulator is OFF. + [..] + The Standby mode allows to achieve the lowest power consumption. It is based on the + Cortex-M3 deepsleep mode, with the voltage regulator disabled. The 1.8 V domain is + consequently powered off. The PLL, the HSI oscillator and the HSE oscillator are also + switched off. SRAM and register contents are lost except for registers in the Backup domain + and Standby circuitry - (++) Entry: - (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. - (++) Exit: - (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up, - tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + (+) Entry: + (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. + (+) Exit: + (++) WKUP pin rising edge, RTC alarm event rising edge, external Reset in + NRSTpin, IWDG Reset - *** Auto-wake-up (AWU) from low-power mode *** - ============================================= - [..] - - (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC - Wake-up event, a tamper event or a time-stamp event, without depending on - an external interrupt (Auto-wake-up mode). + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + + (+) The MCU can be woken up from low-power mode by an RTC Alarm event, + without depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop and Standby modes - (+) RTC auto-wake-up (AWU) from the Stop and Standby modes - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to - configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. - (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it - is necessary to configure the RTC to detect the tamper or time stamp event using the - HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. - - (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to - configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function. + *** PWR Workarounds linked to Silicon Limitation *** + ==================================================== + [..] + Below the list of all silicon limitations known on STM32F1xx prouct. + (#)Workarounds Implemented inside PWR HAL Driver + (##)Debugging Stop mode with WFE entry - overloaded the WFE by an internal function + @endverbatim * @{ */ /** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration - * information for the PVD. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage threshold corresponding to each + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration + * information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each * detection level. * @retval None */ @@ -268,15 +318,15 @@ void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) /* Check the parameters */ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); - + /* Set PLS[7:5] bits according to PVDLevel value */ MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); /* Clear any previous config. Keep it clear if no event or IT mode is selected */ __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); __HAL_PWR_PVD_EXTI_DISABLE_IT(); - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); /* Configure interrupt mode */ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) @@ -303,75 +353,63 @@ void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) } /** - * @brief Enables the Power Voltage Detector(PVD). + * @brief Enables the Power Voltage Detector(PVD). * @retval None */ void HAL_PWR_EnablePVD(void) { + /* Enable the power voltage detector */ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; } /** - * @brief Disables the Power Voltage Detector(PVD). + * @brief Disables the Power Voltage Detector(PVD). * @retval None */ void HAL_PWR_DisablePVD(void) { + /* Disable the power voltage detector */ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; } /** - * @brief Enables the Wake-up PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. - * This parameter can be one of the following values: + * @brief Enables the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable. + * This parameter can be one of the following values: * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices * @retval None */ void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) { /* Check the parameter */ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - /* Enable the wake up pin */ - SET_BIT(PWR->CSR, WakeUpPinx); + /* Enable the EWUPx pin */ + *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE; } /** - * @brief Disables the Wake-up PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. - * This parameter can be one of the following values: + * @brief Disables the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices * @retval None */ void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) { /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - /* Disable the wake up pin */ - CLEAR_BIT(PWR->CSR, WakeUpPinx); + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Disable the EWUPx pin */ + *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE; } - + /** * @brief Enters Sleep mode. - * - * @note In Sleep mode, all I/O pins keep the same state as in Run mode. - * - * @note In Sleep mode, the systick is stopped to avoid exit from this mode with - * systick interrupt when used as time base for Timeout - * - * @param Regulator Specifies the regulator state in SLEEP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON - * @note This parameter is not used for the STM32F4 family and is kept as parameter - * just to maintain compatibility with the lower power families. - * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator: Regulator state as no effect in SLEEP mode - allows to support portability from legacy software + * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction. + * When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * This parameter can be one of the following values: * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction * @retval None @@ -379,7 +417,10 @@ void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) { /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); + /* No check on Regulator because parameter not used in SLEEP mode */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Regulator); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); /* Clear SLEEPDEEP bit of Cortex System Control Register */ @@ -387,7 +428,7 @@ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) /* Select SLEEP mode entry -------------------------------------------------*/ if(SLEEPEntry == PWR_SLEEPENTRY_WFI) - { + { /* Request Wait For Interrupt */ __WFI(); } @@ -402,21 +443,21 @@ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) /** * @brief Enters Stop mode. - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by issuing an interrupt or a wake-up event, - * the HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by using an interrupt or a wakeup event, + * HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption + * By keeping the internal regulator ON during Stop mode, the consumption * is higher although the startup time is reduced. - * @param Regulator Specifies the regulator state in Stop mode. + * @param Regulator: Specifies the regulator state in Stop mode. * This parameter can be one of the following values: * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON - * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction. + * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction. * This parameter can be one of the following values: * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction - * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction + * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction * @retval None */ void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) @@ -424,16 +465,19 @@ void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) /* Check the parameters */ assert_param(IS_PWR_REGULATOR(Regulator)); assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */ - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator); - + + /* Clear PDDS bit in PWR register to specify entering in STOP mode when CPU enter in Deepsleep */ + CLEAR_BIT(PWR->CR, PWR_CR_PDDS); + + /* Select the voltage regulator mode by setting LPDS bit in PWR register according to Regulator parameter value */ + MODIFY_REG(PWR->CR, PWR_CR_LPDS, Regulator); + /* Set SLEEPDEEP bit of Cortex System Control Register */ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - + /* Select Stop mode entry --------------------------------------------------*/ if(STOPEntry == PWR_STOPENTRY_WFI) - { + { /* Request Wait For Interrupt */ __WFI(); } @@ -441,21 +485,19 @@ void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) { /* Request Wait For Event */ __SEV(); - __WFE(); - __WFE(); + PWR_OverloadWfe(); /* WFE redefine locally */ + PWR_OverloadWfe(); /* WFE redefine locally */ } /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); } /** * @brief Enters Standby mode. - * @note In Standby mode, all I/O pins are high impedance except for: + * @note In Standby mode, all I/O pins are high impedance except for: * - Reset pad (still available) - * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC - * Alarm out, or RTC clock calibration out. - * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. - * - WKUP pin 1 (PA0) if enabled. + * - TAMPER pin if configured for tamper or calibration out. + * - WKUP pin (PA0) if enabled. * @retval None */ void HAL_PWR_EnterSTANDBYMode(void) @@ -465,7 +507,7 @@ void HAL_PWR_EnterSTANDBYMode(void) /* Set SLEEPDEEP bit of Cortex System Control Register */ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - + /* This option is used to ensure that store operations are completed */ #if defined ( __CC_ARM) __force_stores(); @@ -474,19 +516,75 @@ void HAL_PWR_EnterSTANDBYMode(void) __WFI(); } + /** - * @brief This function handles the PWR PVD interrupt request. - * @note This API should be called under the PVD_IRQHandler(). + * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enables CORTEX M3 SEVONPEND bit. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disables CORTEX M3 SEVONPEND bit. + * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). * @retval None */ void HAL_PWR_PVD_IRQHandler(void) { - /* Check PWR Exti flag */ + /* Check PWR exti flag */ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) { /* PWR PVD interrupt user callback */ HAL_PWR_PVDCallback(); - + /* Clear PWR Exti pending bit */ __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); } @@ -503,60 +601,10 @@ __weak void HAL_PWR_PVDCallback(void) */ } -/** - * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. - * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * Setting this bit is useful when the processor is expected to run only on - * interruptions handling. - * @retval None - */ -void HAL_PWR_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. - * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * @retval None - */ -void HAL_PWR_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Enables CORTEX M4 SEVONPEND bit. - * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_EnableSEVOnPend(void) -{ - /* Set SEVONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @brief Disables CORTEX M4 SEVONPEND bit. - * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_DisableSEVOnPend(void) -{ - /* Clear SEVONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - /** * @} */ - + /** * @} */ @@ -569,3 +617,5 @@ void HAL_PWR_DisableSEVOnPend(void) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c new file mode 100644 index 0000000..6a58478 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c @@ -0,0 +1,1413 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled, + and all peripherals are off except internal SRAM, Flash and JTAG. + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in input floating state, except the JTAG pins which + are assigned to be used for debug purpose. + [..] Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals whose clocks are not + derived from the System clock (I2S, RTC, ADC, USB OTG FS) + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC +* @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +static void RCC_Delay(uint32_t mdelay); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1 + and APB2). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 24 MHz (STM32F100xx) or 4 to 16 MHz (STM32F101x/STM32F102x/STM32F103x) or 3 to 25 MHz (STM32F105x/STM32F107x) crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL (clocked by HSI or HSE), featuring different output clocks: + (++) The first output is used to generate the high speed system clock (up to 72 MHz for STM32F10xxx or up to 24 MHz for STM32F100xx) + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz) + + (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() + and if a HSE clock failure occurs(HSE used directly or through PLL as System + clock source), the System clocks automatically switched to HSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M3 NMI + (Non-Maskable Interrupt) exception vector. + + (#) MCO1 (microcontroller clock output), used to output SYSCLK, HSI, + HSE or PLL clock (divided by 2) on PA8 pin + PLL2CLK, PLL3CLK/2, PLL3CLK and XTI for STM32F105x/STM32F107x + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + (+@) RTC: RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 128. + (+@) USB OTG FS and RTC: USB OTG FS require a frequency equal to 48 MHz + to work correctly. This clock is derived of the main PLL through PLL Multiplier. + (+@) I2S interface on STM32F105x/STM32F107x can be derived from PLL3CLK + (+@) IWDG clock which is always the LSI clock. + + (#) For STM32F10xxx, the maximum frequency of the SYSCLK and HCLK/PCLK2 is 72 MHz, PCLK1 36 MHz. + For STM32F100xx, the maximum frequency of the SYSCLK and HCLK/PCLK1/PCLK2 is 24 MHz. + Depending on the SYSCLK frequency, the flash latency should be adapted accordingly. + @endverbatim + * @{ + */ + +/* + Additional consideration on the SYSCLK based on Latency settings: + +-----------------------------------------------+ + | Latency | SYSCLK clock frequency (MHz) | + |---------------|-------------------------------| + |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | + |---------------|-------------------------------| + |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | + |---------------|-------------------------------| + |2WS(3CPU cycle)| 48 < SYSCLK <= 72 | + +-----------------------------------------------+ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL, PLL2 and PLL3 are OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS and MCO1 OFF + * - All interrupts disabled + * - All flags are cleared + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL_StatusTypeDef + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Set HSION bit */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM bits to the reset value */ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (0x10U << RCC_CR_HSITRIM_Pos)); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Second step is to clear PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Ensure to reset PLLSRC and PLLMUL bits */ + CLEAR_REG(RCC->CFGR); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset HSEON & CSSON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + +#if defined(RCC_PLL2_SUPPORT) + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLL2ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); + + /* Wait till PLL2 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } +#endif /* RCC_PLL2_SUPPORT */ + +#if defined(RCC_PLLI2S_SUPPORT) + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLL3ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); + + /* Wait till PLL3 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL3RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_CFGR2_PREDIV1) + /* Reset CFGR2 register */ + CLEAR_REG(RCC->CFGR2); +#endif /* RCC_CFGR2_PREDIV1 */ + + /* Reset all CSR flags */ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIR); + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note The PLL is not disabled when USB OTG FS clock is enabled (specific to devices with USB FS) + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t pll_config; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + { + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + Clear_Flag_If_Its_Expected(RCC_FLAG_HSERDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + Set_Flag_If_Its_Expected(RCC_FLAG_HSERDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI_DIV2))) + { + /* When HSI is used as system clock it will not disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + Clear_Flag_If_Its_Expected(RCC_FLAG_HSIRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + Set_Flag_If_Its_Expected(RCC_FLAG_HSIRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + Clear_Flag_If_Its_Expected(RCC_FLAG_LSIRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* To have a fully stabilized clock in the specified range, a software delay of 1ms + should be added.*/ + RCC_Delay(1); + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + Set_Flag_If_Its_Expected(RCC_FLAG_LSIRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + Clear_Flag_If_Its_Expected(RCC_FLAG_LSERDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + Set_Flag_If_Its_Expected(RCC_FLAG_LSERDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Require to disable power clock if necessary */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + +#if defined(RCC_CR_PLL2ON) + /*-------------------------------- PLL2 Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL2(RCC_OscInitStruct->PLL2.PLL2State)); + if ((RCC_OscInitStruct->PLL2.PLL2State) != RCC_PLL2_NONE) + { + /* This bit can not be cleared if the PLL2 clock is used indirectly as system + clock (i.e. it is used as PLL clock entry that is used as system clock). */ + if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ + (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ + ((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) + { + return HAL_ERROR; + } + else + { + if ((RCC_OscInitStruct->PLL2.PLL2State) == RCC_PLL2_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_OscInitStruct->PLL2.PLL2MUL)); + assert_param(IS_RCC_HSE_PREDIV2(RCC_OscInitStruct->PLL2.HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLLI2S is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != RCC_OscInitStruct->PLL2.HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(RCC_OscInitStruct->PLL2.HSEPrediv2Value); + + /* Configure the main PLL2 multiplication factors. */ + __HAL_RCC_PLL2_CONFIG(RCC_OscInitStruct->PLL2.PLL2MUL); + + /* Enable the main PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Set PREDIV1 source to HSE */ + CLEAR_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC); + + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + +#endif /* RCC_CR_PLL2ON */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + Set_Flag_If_Its_Expected(RCC_FLAG_PLLRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv factor --------------------------------*/ + /* It can be written only when the PLL is disabled. Not used in PLL source is different than HSE */ + if (RCC_OscInitStruct->PLL.PLLSource == RCC_PLLSOURCE_HSE) + { + /* Check the parameter */ + assert_param(IS_RCC_HSE_PREDIV(RCC_OscInitStruct->HSEPredivValue)); +#if defined(RCC_CFGR2_PREDIV1SRC) + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_OscInitStruct->Prediv1Source)); + + /* Set PREDIV1 source */ + SET_BIT(RCC->CFGR2, RCC_OscInitStruct->Prediv1Source); +#endif /* RCC_CFGR2_PREDIV1SRC */ + + /* Set PREDIV1 Value */ + __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue); + } + + /* Configure the main PLL clock source and multiplication factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + Clear_Flag_If_Its_Expected(RCC_FLAG_PLLRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + Clear_Flag_If_Its_Expected(RCC_FLAG_PLLRDY, 1); + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + if ((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_CFGR_PLLMULL) != RCC_OscInitStruct->PLL.PLLMUL)) + { + return HAL_ERROR; + } + } + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * The value of this parameter depend on device used within the same series + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + +#if defined(FLASH_ACR_LATENCY) + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } +} + +#endif /* FLASH_ACR_LATENCY */ +/*-------------------------- HCLK Configuration --------------------------*/ +if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APBx dividers in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); + } + + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + return HAL_ERROR; + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + RCC->CFGR = (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos); + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + +#if defined(FLASH_ACR_LATENCY) + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } +} +#endif /* FLASH_ACR_LATENCY */ + +/*-------------------------- PCLK1 Configuration ---------------------------*/ +if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3)); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]; + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick(uwTickPrio); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * + @verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + + @endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + @if STM32F105xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source + @endif + @if STM32F107xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source + @endif + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio = {0U}; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(RCC_MCOx); + UNUSED(RCC_MCODiv); + + /* Configure the MCO1 pin in alternate function mode */ + gpio.Mode = GPIO_MODE_AF_PP; + gpio.Speed = GPIO_SPEED_FREQ_HIGH; + gpio.Pull = GPIO_NOPULL; + gpio.Pin = MCO1_PIN; + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio); + + /* Configure the MCO clock source */ + __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv); +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M3 NMI (Non-Maskable Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; +} + +/** + * @brief Returns the SYSCLK frequency + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) + * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) or HSI_VALUE(*) multiplied by the PLL factor. + * @note (*) HSI_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ +#if defined(RCC_CFGR2_PREDIV1SRC) + const uint8_t aPLLMULFactorTable[14] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13}; + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; +#else + const uint8_t aPLLMULFactorTable[16] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; +#if defined(RCC_CFGR2_PREDIV1) + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; +#else + const uint8_t aPredivFactorTable[2] = {1, 2}; +#endif /*RCC_CFGR2_PREDIV1*/ + +#endif + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + uint32_t sysclockfreq = 0U; +#if defined(RCC_CFGR2_PREDIV1SRC) + uint32_t prediv2 = 0U, pll2mul = 0U; +#endif /*RCC_CFGR2_PREDIV1SRC*/ + + tmpreg = RCC->CFGR; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos]; + if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + { +#if defined(RCC_CFGR2_PREDIV1) + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos]; +#else + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos]; +#endif /*RCC_CFGR2_PREDIV1*/ +#if defined(RCC_CFGR2_PREDIV1SRC) + + if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) + { + /* PLL2 selected as Prediv1 source */ + /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> RCC_CFGR2_PLL2MUL_Pos) + 2; + pllclk = (uint32_t)(((uint64_t)HSE_VALUE * (uint64_t)pll2mul * (uint64_t)pllmul) / ((uint64_t)prediv2 * (uint64_t)prediv)); + } + else + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE * pllmul) / prediv); + } + + /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */ + /* In this case need to divide pllclk by 2 */ + if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> RCC_CFGR_PLLMULL_Pos]) + { + pllclk = pllclk / 2; + } +#else + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE * pllmul) / prediv); +#endif /*RCC_CFGR2_PREDIV1SRC*/ + } + else + { + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); + } + sysclockfreq = pllclk; + break; + } + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + break; + } + } + return sysclockfreq; +} + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos]); +} + +/** + * @brief Returns the PCLK2 frequency + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos]); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \ + | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; + +#if defined(RCC_CFGR2_PREDIV1SRC) + /* Get the Prediv1 source --------------------------------------------------*/ + RCC_OscInitStruct->Prediv1Source = READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC); +#endif /* RCC_CFGR2_PREDIV1SRC */ + + /* Get the HSE configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + RCC_OscInitStruct->HSEPredivValue = __HAL_RCC_HSE_GET_PREDIV(); + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMULL); +#if defined(RCC_CR_PLL2ON) + /* Get the PLL2 configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLL2ON) == RCC_CR_PLL2ON) + { + RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_ON; + } + else + { + RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_OFF; + } + RCC_OscInitStruct->PLL2.HSEPrediv2Value = __HAL_RCC_HSE_GET_PREDIV2(); + RCC_OscInitStruct->PLL2.PLL2MUL = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PLL2MUL); +#endif /* RCC_CR_PLL2ON */ +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * contains the current clock configuration. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != NULL); + assert_param(pFLatency != NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3); + +#if defined(FLASH_ACR_LATENCY) + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +#else + /* For VALUE lines devices, only LATENCY_0 can be set*/ + *pFLatency = (uint32_t)FLASH_LATENCY_0; +#endif +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief This function provides delay (in milliseconds) based on CPU cycles method. + * @param mdelay: specifies the delay time length, in milliseconds. + * @retval None + */ +static void RCC_Delay(uint32_t mdelay) +{ + __IO uint32_t Delay = mdelay * (SystemCoreClock / 8U / 1000U); + do + { + __NOP(); + } + while (Delay --); +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c new file mode 100644 index 0000000..a5be9af --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c @@ -0,0 +1,863 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/** @defgroup RCCEx RCCEx + * @brief RCC Extension HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the + * RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks(RTC clock). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) are set to their reset values. + * + * @note In case of STM32F105xC or STM32F107xC devices, PLLI2S will be enabled if requested on + * one of 2 I2S interfaces. When PLLI2S is enabled, you need to call HAL_RCCEx_DisablePLLI2S to + * manually disable it. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U, temp_reg = 0U; +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t pllactive = 0U; +#endif /* STM32F105xC || STM32F107xC */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*------------------------------- RTC/LCD Configuration ------------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) + { + FlagStatus pwrclkchanged = RESET; + + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); + if ((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = temp_reg; + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + + /* Require to disable power clock if necessary */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*------------------------------ ADC clock Configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + } + +#if defined(STM32F105xC) || defined(STM32F107xC) + /*------------------------------ I2S2 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection)); + + /* Configure the I2S2 clock source */ + __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection); + } + + /*------------------------------ I2S3 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLKSOURCE(PeriphClkInit->I2s3ClockSelection)); + + /* Configure the I2S3 clock source */ + __HAL_RCC_I2S3_CONFIG(PeriphClkInit->I2s3ClockSelection); + } + + /*------------------------------ PLL I2S Configuration ----------------------*/ + /* Check that PLLI2S need to be enabled */ + if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S2SRC) || HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) + { + /* Update flag to indicate that PLL I2S should be active */ + pllactive = 1; + } + + /* Check if PLL I2S need to be enabled */ + if (pllactive == 1) + { + /* Enable PLL I2S only if not active */ + if (HAL_IS_BIT_CLR(RCC->CR, RCC_CR_PLL3ON)) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLI2S_MUL(PeriphClkInit->PLLI2S.PLLI2SMUL)); + assert_param(IS_RCC_HSE_PREDIV2(PeriphClkInit->PLLI2S.HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLL2 is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != PeriphClkInit->PLLI2S.HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(PeriphClkInit->PLLI2S.HSEPrediv2Value); + + /* Configure the main PLLI2S multiplication factors. */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SMUL); + + /* Enable the main PLLI2S. */ + __HAL_RCC_PLLI2S_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Return an error only if user wants to change the PLLI2SMUL whereas PLLI2S is active */ + if (READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL) != PeriphClkInit->PLLI2S.PLLI2SMUL) + { + return HAL_ERROR; + } + } + } +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + /*------------------------------ USB clock Configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + + return HAL_OK; +} + +/** + * @brief Get the PeriphClkInit according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks(RTC, I2S, ADC clocks). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t srcclk = 0U; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC; + + /* Get the RTC configuration -----------------------------------------------*/ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + /* Source clock is LSE or LSI*/ + PeriphClkInit->RTCClockSelection = srcclk; + + /* Get the ADC clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC; + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + +#if defined(STM32F105xC) || defined(STM32F107xC) + /* Get the I2S2 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; + PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE(); + + /* Get the I2S3 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3; + PeriphClkInit->I2s3ClockSelection = __HAL_RCC_GET_I2S3_SOURCE(); + +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F103xE) || defined(STM32F103xG) + /* Get the I2S2 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; + PeriphClkInit->I2s2ClockSelection = RCC_I2S2CLKSOURCE_SYSCLK; + + /* Get the I2S3 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3; + PeriphClkInit->I2s3ClockSelection = RCC_I2S3CLKSOURCE_SYSCLK; + +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + /* Get the USB clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +} + +/** + * @brief Returns the peripheral clock frequency + * @note Returns 0 if peripheral clock is unknown + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + @if STM32F103xE + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + @endif + @if STM32F103xG + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + @endif + @if STM32F105xC + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F107xC + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F102xx + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F103xx + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + * @retval Frequency in Hz (0: means that no available frequency for the peripheral) + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ +#if defined(STM32F105xC) || defined(STM32F107xC) + const uint8_t aPLLMULFactorTable[14] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13}; + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; + + uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U; + uint32_t pll2mul = 0U, pll3mul = 0U, prediv2 = 0U; +#endif /* STM32F105xC || STM32F107xC */ +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || \ + defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + const uint8_t aPLLMULFactorTable[16] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; + const uint8_t aPredivFactorTable[2] = {1, 2}; + + uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U; +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + uint32_t temp_reg = 0U, frequency = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + switch (PeriphClk) + { +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + case RCC_PERIPHCLK_USB: + { + /* Get RCC configuration ------------------------------------------------------*/ + temp_reg = RCC->CFGR; + + /* Check if PLL is enabled */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLON)) + { + pllmul = aPLLMULFactorTable[(uint32_t)(temp_reg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos]; + if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + { +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) + prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos]; +#else + prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos]; +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) + { + /* PLL2 selected as Prediv1 source */ + /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> RCC_CFGR2_PLL2MUL_Pos) + 2; + pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv1) * pllmul); + } + else + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul); + } + + /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */ + /* In this case need to divide pllclk by 2 */ + if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> RCC_CFGR_PLLMULL_Pos]) + { + pllclk = pllclk / 2; + } +#else + if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul); + } +#endif /* STM32F105xC || STM32F107xC */ + } + else + { + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); + } + + /* Calcul of the USB frequency*/ +#if defined(STM32F105xC) || defined(STM32F107xC) + /* USBCLK = PLLVCO = (2 x PLLCLK) / USB prescaler */ + if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL_DIV2) + { + /* Prescaler of 2 selected for USB */ + frequency = pllclk; + } + else + { + /* Prescaler of 3 selected for USB */ + frequency = (2 * pllclk) / 3; + } +#else + /* USBCLK = PLLCLK / USB prescaler */ + if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL) + { + /* No prescaler selected for USB */ + frequency = pllclk; + } + else + { + /* Prescaler of 1.5 selected for USB */ + frequency = (pllclk * 2) / 3; + } +#endif + } + break; + } +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) + case RCC_PERIPHCLK_I2S2: + { +#if defined(STM32F103xE) || defined(STM32F103xG) + /* SYSCLK used as source clock for I2S2 */ + frequency = HAL_RCC_GetSysClockFreq(); +#else + if (__HAL_RCC_GET_I2S2_SOURCE() == RCC_I2S2CLKSOURCE_SYSCLK) + { + /* SYSCLK used as source clock for I2S2 */ + frequency = HAL_RCC_GetSysClockFreq(); + } + else + { + /* Check if PLLI2S is enabled */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON)) + { + /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2; + frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul)); + } + } +#endif /* STM32F103xE || STM32F103xG */ + break; + } + case RCC_PERIPHCLK_I2S3: + { +#if defined(STM32F103xE) || defined(STM32F103xG) + /* SYSCLK used as source clock for I2S3 */ + frequency = HAL_RCC_GetSysClockFreq(); +#else + if (__HAL_RCC_GET_I2S3_SOURCE() == RCC_I2S3CLKSOURCE_SYSCLK) + { + /* SYSCLK used as source clock for I2S3 */ + frequency = HAL_RCC_GetSysClockFreq(); + } + else + { + /* Check if PLLI2S is enabled */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON)) + { + /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2; + frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul)); + } + } +#endif /* STM32F103xE || STM32F103xG */ + break; + } +#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + case RCC_PERIPHCLK_RTC: + { + /* Get RCC BDCR configuration ------------------------------------------------------*/ + temp_reg = RCC->BDCR; + + /* Check if LSE is ready if RTC clock selection is LSE */ + if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready if RTC clock selection is LSI */ + else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) + { + frequency = LSI_VALUE; + } + else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_HSE_DIV128) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) + { + frequency = HSE_VALUE / 128U; + } + /* Clock not enabled for RTC*/ + else + { + /* nothing to do: frequency already initialized to 0U */ + } + break; + } + case RCC_PERIPHCLK_ADC: + { + frequency = HAL_RCC_GetPCLK2Freq() / (((__HAL_RCC_GET_ADC_SOURCE() >> RCC_CFGR_ADCPRE_Pos) + 1) * 2); + break; + } + default: + { + break; + } + } + return (frequency); +} + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Exported_Functions_Group2 PLLI2S Management function + * @brief PLLI2S Management functions + * +@verbatim + =============================================================================== + ##### Extended PLLI2S Management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PLLI2S + activation or deactivation +@endverbatim + * @{ + */ + +/** + * @brief Enable PLLI2S + * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that + * contains the configuration information for the PLLI2S + * @note The PLLI2S configuration not modified if used by I2S2 or I2S3 Interface. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) +{ + uint32_t tickstart = 0U; + + /* Check that PLL I2S has not been already enabled by I2S2 or I2S3*/ + if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLI2S_MUL(PLLI2SInit->PLLI2SMUL)); + assert_param(IS_RCC_HSE_PREDIV2(PLLI2SInit->HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLL2 is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != PLLI2SInit->HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Disable the main PLLI2S. */ + __HAL_RCC_PLLI2S_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(PLLI2SInit->HSEPrediv2Value); + + + /* Configure the main PLLI2S multiplication factors. */ + __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SMUL); + + /* Enable the main PLLI2S. */ + __HAL_RCC_PLLI2S_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* PLLI2S cannot be modified as already used by I2S2 or I2S3 */ + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disable PLLI2S + * @note PLLI2S is not disabled if used by I2S2 or I2S3 Interface. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) +{ + uint32_t tickstart = 0U; + + /* Disable PLL I2S as not requested by I2S2 or I2S3*/ + if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) + { + /* Disable the main PLLI2S. */ + __HAL_RCC_PLLI2S_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* PLLI2S is currently used by I2S2 or I2S3. Cannot be disabled.*/ + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group3 PLL2 Management function + * @brief PLL2 Management functions + * +@verbatim + =============================================================================== + ##### Extended PLL2 Management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PLL2 + activation or deactivation +@endverbatim + * @{ + */ + +/** + * @brief Enable PLL2 + * @param PLL2Init pointer to an RCC_PLL2InitTypeDef structure that + * contains the configuration information for the PLL2 + * @note The PLL2 configuration not modified if used indirectly as system clock. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init) +{ + uint32_t tickstart = 0U; + + /* This bit can not be cleared if the PLL2 clock is used indirectly as system + clock (i.e. it is used as PLL clock entry that is used as system clock). */ + if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ + (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ + ((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) + { + return HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(PLL2Init->PLL2MUL)); + assert_param(IS_RCC_HSE_PREDIV2(PLL2Init->HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLLI2S is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != PLL2Init->HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(PLL2Init->HSEPrediv2Value); + + /* Configure the main PLL2 multiplication factors. */ + __HAL_RCC_PLL2_CONFIG(PLL2Init->PLL2MUL); + + /* Enable the main PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @brief Disable PLL2 + * @note PLL2 is not disabled if used indirectly as system clock. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void) +{ + uint32_t tickstart = 0U; + + /* This bit can not be cleared if the PLL2 clock is used indirectly as system + clock (i.e. it is used as PLL clock entry that is used as system clock). */ + if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ + (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ + ((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) + { + return HAL_ERROR; + } + else + { + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c new file mode 100644 index 0000000..ca6e6ff --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c @@ -0,0 +1,1949 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rtc.c + * @author MCD Application Team + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) peripheral: + * + Initialization and de-initialization functions + * + RTC Time and Date functions + * + RTC Alarm functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ================================================================== + [..] + (+) Enable the RTC domain access (see description in the section above). + (+) Configure the RTC Prescaler (Asynchronous prescaler to generate RTC 1Hz time base) + using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + *** Tamper configuration *** + ============================ + [..] + (+) Enable the RTC Tamper and configure the Tamper Level using the + HAL_RTCEx_SetTamper() function. You can configure RTC Tamper with interrupt + mode using HAL_RTCEx_SetTamper_IT() function. + (+) The TAMPER1 alternate function can be mapped to PC13 + + *** Backup Data Registers configuration *** + =========================================== + [..] + (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() + function. + (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() + function. + + ##### WARNING: Drivers Restrictions ##### + ================================================================== + [..] RTC version used on STM32F1 families is version V1. All the features supported by V2 + (other families) will be not supported on F1. + [..] As on V2, main RTC features are managed by HW. But on F1, date feature is completely + managed by SW. + [..] Then, there are some restrictions compared to other families: + (+) Only format 24 hours supported in HAL (format 12 hours not supported) + (+) Date is saved in SRAM. Then, when MCU is in STOP or STANDBY mode, date will be lost. + User should implement a way to save date before entering in low power mode (an + example is provided with firmware package based on backup registers) + (+) Date is automatically updated each time a HAL_RTC_GetTime or HAL_RTC_GetDate is called. + (+) Alarm detection is limited to 1 day. It will expire only 1 time (no alarm repetition, need + to program a new alarm) + + ##### Backup Domain Operating Condition ##### + ============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC + when VDD is turned off, VBAT pin can be connected to an optional + standby voltage supplied by a battery or by another source. + + [..] To allow the RTC operating even when the main digital supply (VDD) is turned + off, the VBAT pin powers the following blocks: + (#) The RTC + (#) The LSE oscillator + (#) The backup SRAM when the low power backup regulator is enabled + (#) PC13 to PC15 I/Os, plus PI8 I/O (when available) + + [..] When the backup domain is supplied by VDD (analog switch connected to VDD), + the following pins are available: + (+) PC13 can be used as a Tamper pin + + [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT + because VDD is not present), the following pins are available: + (+) PC13 can be used as the Tamper pin + + ##### Backup Domain Reset ##### + ================================================================== + [..] The backup domain reset sets all RTC registers and the RCC_BDCR register + to their reset values. + [..] A backup domain reset is generated when one of the following events occurs: + (#) Software reset, triggered by setting the BDRST bit in the + RCC Backup domain control register (RCC_BDCR). + (#) VDD or VBAT power on, if both supplies have previously been powered off. + (#) Tamper detection event resets all data backup registers. + + ##### Backup Domain Access ##### + ================================================================== + [..] After reset, the backup domain (RTC registers, RTC backup data + registers and backup SRAM) is protected against possible unwanted write + accesses. + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Call the function HAL_RCCEx_PeriphCLKConfig in using RCC_PERIPHCLK_RTC for + PeriphClockSelection and select RTCClockSelection (LSE, LSI or HSE) + (+) Enable the BKP clock in using __HAL_RCC_BKP_CLK_ENABLE() + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarms (Alarm A), + and RTC tamper event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_RTC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_RTC_RegisterCallback() to register an interrupt callback. + + [..] + Function @ref HAL_RTC_RegisterCallback() allows to register following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_RTC_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + [..] + By default, after the @ref HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, + all callbacks are set to the corresponding weak functions : + example @ref AlarmAEventCallback(). + Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function + in the @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() only when these callbacks are null + (not registered beforehand). + If not, MspInit or MspDeInit are not null, @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + [..] + Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_RTC_RegisterCallback() before calling @ref HAL_RTC_DeInit() + or @ref HAL_RTC_Init() function. + [..] + When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ +#define RTC_ALARM_RESETVALUE_REGISTER (uint16_t)0xFFFF +#define RTC_ALARM_RESETVALUE 0xFFFFFFFFU + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +static uint32_t RTC_ReadTimeCounter(RTC_HandleTypeDef *hrtc); +static HAL_StatusTypeDef RTC_WriteTimeCounter(RTC_HandleTypeDef *hrtc, uint32_t TimeCounter); +static uint32_t RTC_ReadAlarmCounter(RTC_HandleTypeDef *hrtc); +static HAL_StatusTypeDef RTC_WriteAlarmCounter(RTC_HandleTypeDef *hrtc, uint32_t AlarmCounter); +static HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc); +static HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); +static uint8_t RTC_ByteToBcd2(uint8_t Value); +static uint8_t RTC_Bcd2ToByte(uint8_t Value); +static uint8_t RTC_IsLeapYear(uint16_t nYear); +static void RTC_DateUpdate(RTC_HandleTypeDef *hrtc, uint32_t DayElapsed); +static uint8_t RTC_WeekDayNum(uint32_t nYear, uint8_t nMonth, uint8_t nDay); + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Asynchronous), disable RTC registers Write protection, + enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler should be programmed to generate the RTC 1Hz time base. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by setting the CNF bit in the RTC_CRL register. + (#) To read the calendar after wakeup from low power modes (Standby or Stop) + the software must first wait for the RSF bit (Register Synchronized Flag) + in the RTC_CRL register to be set by hardware. + The HAL_RTC_WaitForSynchro() function implements the above software + sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RTC peripheral + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + uint32_t prescaler = 0U; + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_CALIB_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + + if (hrtc->MspInitCallback == NULL) + { + hrtc->MspInitCallback = HAL_RTC_MspInit; + } + /* Init the low level hardware */ + hrtc->MspInitCallback(hrtc); + + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + } +#else + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); + } +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Waiting for synchro */ + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + + /* Set Initialization mode */ + if (RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + else + { + /* Clear Flags Bits */ + CLEAR_BIT(hrtc->Instance->CRL, (RTC_FLAG_OW | RTC_FLAG_ALRAF | RTC_FLAG_SEC)); + + if (hrtc->Init.OutPut != RTC_OUTPUTSOURCE_NONE) + { + /* Disable the selected Tamper pin */ + CLEAR_BIT(BKP->CR, BKP_CR_TPE); + } + + /* Set the signal which will be routed to RTC Tamper pin*/ + MODIFY_REG(BKP->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS), hrtc->Init.OutPut); + + if (hrtc->Init.AsynchPrediv != RTC_AUTO_1_SECOND) + { + /* RTC Prescaler provided directly by end-user*/ + prescaler = hrtc->Init.AsynchPrediv; + } + else + { + /* RTC Prescaler will be automatically calculated to get 1 second timebase */ + /* Get the RTCCLK frequency */ + prescaler = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_RTC); + + /* Check that RTC clock is enabled*/ + if (prescaler == 0U) + { + /* Should not happen. Frequency is not available*/ + hrtc->State = HAL_RTC_STATE_ERROR; + return HAL_ERROR; + } + else + { + /* RTC period = RTCCLK/(RTC_PR + 1) */ + prescaler = prescaler - 1U; + } + } + + /* Configure the RTC_PRLH / RTC_PRLL */ + MODIFY_REG(hrtc->Instance->PRLH, RTC_PRLH_PRL, (prescaler >> 16U)); + MODIFY_REG(hrtc->Instance->PRLL, RTC_PRLL_PRL, (prescaler & RTC_PRLL_PRL)); + + /* Wait for synchro */ + if (RTC_ExitInitMode(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + + /* Initialize date to 1st of January 2000 */ + hrtc->DateToUpdate.Year = 0x00U; + hrtc->DateToUpdate.Month = RTC_MONTH_JANUARY; + hrtc->DateToUpdate.Date = 0x01U; + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; + } +} + +/** + * @brief DeInitializes the RTC peripheral + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note This function does not reset the RTC Backup Data registers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Set Initialization mode */ + if (RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + CLEAR_REG(hrtc->Instance->CNTL); + CLEAR_REG(hrtc->Instance->CNTH); + WRITE_REG(hrtc->Instance->PRLL, 0x00008000U); + CLEAR_REG(hrtc->Instance->PRLH); + + /* Reset All CRH/CRL bits */ + CLEAR_REG(hrtc->Instance->CRH); + CLEAR_REG(hrtc->Instance->CRL); + + if (RTC_ExitInitMode(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + + /* Wait for synchro*/ + HAL_RTC_WaitForSynchro(hrtc); + + /* Clear RSF flag */ + CLEAR_BIT(hrtc->Instance->CRL, RTC_FLAG_RSF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hrtc->MspDeInitCallback(hrtc); + +#else + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + hrtc->State = HAL_RTC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RTC Callback + * To be used instead of the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hrtc); + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = pCallback; + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = pCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Unregister an RTC Callback + * RTC callabck is redirected to the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrtc); + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Initializes the RTC MSP. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the RTC MSP. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 Time and Date functions + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Sets RTC current time. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTime: Pointer to Time structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t counter_time = 0U, counter_alarm = 0U; + + /* Check input parameters */ + if ((hrtc == NULL) || (sTime == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_HOUR24(sTime->Hours)); + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + counter_time = (uint32_t)(((uint32_t)sTime->Hours * 3600U) + \ + ((uint32_t)sTime->Minutes * 60U) + \ + ((uint32_t)sTime->Seconds)); + } + else + { + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + + counter_time = (((uint32_t)(RTC_Bcd2ToByte(sTime->Hours)) * 3600U) + \ + ((uint32_t)(RTC_Bcd2ToByte(sTime->Minutes)) * 60U) + \ + ((uint32_t)(RTC_Bcd2ToByte(sTime->Seconds)))); + } + + /* Write time counter in RTC registers */ + if (RTC_WriteTimeCounter(hrtc, counter_time) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Clear Second and overflow flags */ + CLEAR_BIT(hrtc->Instance->CRL, (RTC_FLAG_SEC | RTC_FLAG_OW)); + + /* Read current Alarm counter in RTC registers */ + counter_alarm = RTC_ReadAlarmCounter(hrtc); + + /* Set again alarm to match with new time if enabled */ + if (counter_alarm != RTC_ALARM_RESETVALUE) + { + if (counter_alarm < counter_time) + { + /* Add 1 day to alarm counter*/ + counter_alarm += (uint32_t)(24U * 3600U); + + /* Write new Alarm counter in RTC registers */ + if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + } + + hrtc->State = HAL_RTC_STATE_READY; + + __HAL_UNLOCK(hrtc); + + return HAL_OK; + } +} + +/** + * @brief Gets RTC current time. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTime: Pointer to Time structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t counter_time = 0U, counter_alarm = 0U, days_elapsed = 0U, hours = 0U; + + /* Check input parameters */ + if ((hrtc == NULL) || (sTime == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Check if counter overflow occurred */ + if (__HAL_RTC_OVERFLOW_GET_FLAG(hrtc, RTC_FLAG_OW)) + { + return HAL_ERROR; + } + + /* Read the time counter*/ + counter_time = RTC_ReadTimeCounter(hrtc); + + /* Fill the structure fields with the read parameters */ + hours = counter_time / 3600U; + sTime->Minutes = (uint8_t)((counter_time % 3600U) / 60U); + sTime->Seconds = (uint8_t)((counter_time % 3600U) % 60U); + + if (hours >= 24U) + { + /* Get number of days elapsed from last calculation */ + days_elapsed = (hours / 24U); + + /* Set Hours in RTC_TimeTypeDef structure*/ + sTime->Hours = (hours % 24U); + + /* Read Alarm counter in RTC registers */ + counter_alarm = RTC_ReadAlarmCounter(hrtc); + + /* Calculate remaining time to reach alarm (only if set and not yet expired)*/ + if ((counter_alarm != RTC_ALARM_RESETVALUE) && (counter_alarm > counter_time)) + { + counter_alarm -= counter_time; + } + else + { + /* In case of counter_alarm < counter_time */ + /* Alarm expiration already occurred but alarm not deactivated */ + counter_alarm = RTC_ALARM_RESETVALUE; + } + + /* Set updated time in decreasing counter by number of days elapsed */ + counter_time -= (days_elapsed * 24U * 3600U); + + /* Write time counter in RTC registers */ + if (RTC_WriteTimeCounter(hrtc, counter_time) != HAL_OK) + { + return HAL_ERROR; + } + + /* Set updated alarm to be set */ + if (counter_alarm != RTC_ALARM_RESETVALUE) + { + counter_alarm += counter_time; + + /* Write time counter in RTC registers */ + if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + /* Alarm already occurred. Set it to reset values to avoid unexpected expiration */ + if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* Update date */ + RTC_DateUpdate(hrtc, days_elapsed); + } + else + { + sTime->Hours = hours; + } + + /* Check the input parameters format */ + if (Format != RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to BCD format */ + sTime->Hours = (uint8_t)RTC_ByteToBcd2(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_ByteToBcd2(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_ByteToBcd2(sTime->Seconds); + } + + return HAL_OK; +} + + +/** + * @brief Sets RTC current date. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sDate: Pointer to date structure + * @param Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t counter_time = 0U, counter_alarm = 0U, hours = 0U; + + /* Check input parameters */ + if ((hrtc == NULL) || (sDate == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + /* Change the current date */ + hrtc->DateToUpdate.Year = sDate->Year; + hrtc->DateToUpdate.Month = sDate->Month; + hrtc->DateToUpdate.Date = sDate->Date; + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); + assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); + + /* Change the current date */ + hrtc->DateToUpdate.Year = RTC_Bcd2ToByte(sDate->Year); + hrtc->DateToUpdate.Month = RTC_Bcd2ToByte(sDate->Month); + hrtc->DateToUpdate.Date = RTC_Bcd2ToByte(sDate->Date); + } + + /* WeekDay set by user can be ignored because automatically calculated */ + hrtc->DateToUpdate.WeekDay = RTC_WeekDayNum(hrtc->DateToUpdate.Year, hrtc->DateToUpdate.Month, hrtc->DateToUpdate.Date); + sDate->WeekDay = hrtc->DateToUpdate.WeekDay; + + /* Reset time to be aligned on the same day */ + /* Read the time counter*/ + counter_time = RTC_ReadTimeCounter(hrtc); + + /* Fill the structure fields with the read parameters */ + hours = counter_time / 3600U; + if (hours > 24U) + { + /* Set updated time in decreasing counter by number of days elapsed */ + counter_time -= ((hours / 24U) * 24U * 3600U); + /* Write time counter in RTC registers */ + if (RTC_WriteTimeCounter(hrtc, counter_time) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Read current Alarm counter in RTC registers */ + counter_alarm = RTC_ReadAlarmCounter(hrtc); + + /* Set again alarm to match with new time if enabled */ + if (counter_alarm != RTC_ALARM_RESETVALUE) + { + if (counter_alarm < counter_time) + { + /* Add 1 day to alarm counter*/ + counter_alarm += (uint32_t)(24U * 3600U); + + /* Write new Alarm counter in RTC registers */ + if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + } + + + } + + hrtc->State = HAL_RTC_STATE_READY ; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets RTC current date. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sDate: Pointer to Date structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + RTC_TimeTypeDef stime = {0U}; + + /* Check input parameters */ + if ((hrtc == NULL) || (sDate == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Call HAL_RTC_GetTime function to update date if counter higher than 24 hours */ + if (HAL_RTC_GetTime(hrtc, &stime, RTC_FORMAT_BIN) != HAL_OK) + { + return HAL_ERROR; + } + + /* Fill the structure fields with the read parameters */ + sDate->WeekDay = hrtc->DateToUpdate.WeekDay; + sDate->Year = hrtc->DateToUpdate.Year; + sDate->Month = hrtc->DateToUpdate.Month; + sDate->Date = hrtc->DateToUpdate.Date; + + /* Check the input parameters format */ + if (Format != RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to BCD format */ + sDate->Year = (uint8_t)RTC_ByteToBcd2(sDate->Year); + sDate->Month = (uint8_t)RTC_ByteToBcd2(sDate->Month); + sDate->Date = (uint8_t)RTC_ByteToBcd2(sDate->Date); + } + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 Alarm functions + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ + +/** + * @brief Sets the specified RTC Alarm. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm: Pointer to Alarm structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t counter_alarm = 0U, counter_time; + RTC_TimeTypeDef stime = {0U}; + + /* Check input parameters */ + if ((hrtc == NULL) || (sAlarm == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Call HAL_RTC_GetTime function to update date if counter higher than 24 hours */ + if (HAL_RTC_GetTime(hrtc, &stime, RTC_FORMAT_BIN) != HAL_OK) + { + return HAL_ERROR; + } + + /* Convert time in seconds */ + counter_time = (uint32_t)(((uint32_t)stime.Hours * 3600U) + \ + ((uint32_t)stime.Minutes * 60U) + \ + ((uint32_t)stime.Seconds)); + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + counter_alarm = (uint32_t)(((uint32_t)sAlarm->AlarmTime.Hours * 3600U) + \ + ((uint32_t)sAlarm->AlarmTime.Minutes * 60U) + \ + ((uint32_t)sAlarm->AlarmTime.Seconds)); + } + else + { + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + counter_alarm = (((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)) * 3600U) + \ + ((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)) * 60U) + \ + ((uint32_t)RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + } + + /* Check that requested alarm should expire in the same day (otherwise add 1 day) */ + if (counter_alarm < counter_time) + { + /* Add 1 day to alarm counter*/ + counter_alarm += (uint32_t)(24U * 3600U); + } + + /* Write Alarm counter in RTC registers */ + if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + hrtc->State = HAL_RTC_STATE_READY; + + __HAL_UNLOCK(hrtc); + + return HAL_OK; + } +} + +/** + * @brief Sets the specified RTC Alarm with Interrupt + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm: Pointer to Alarm structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t counter_alarm = 0U, counter_time; + RTC_TimeTypeDef stime = {0U}; + + /* Check input parameters */ + if ((hrtc == NULL) || (sAlarm == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Call HAL_RTC_GetTime function to update date if counter higher than 24 hours */ + if (HAL_RTC_GetTime(hrtc, &stime, RTC_FORMAT_BIN) != HAL_OK) + { + return HAL_ERROR; + } + + /* Convert time in seconds */ + counter_time = (uint32_t)(((uint32_t)stime.Hours * 3600U) + \ + ((uint32_t)stime.Minutes * 60U) + \ + ((uint32_t)stime.Seconds)); + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + counter_alarm = (uint32_t)(((uint32_t)sAlarm->AlarmTime.Hours * 3600U) + \ + ((uint32_t)sAlarm->AlarmTime.Minutes * 60U) + \ + ((uint32_t)sAlarm->AlarmTime.Seconds)); + } + else + { + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + counter_alarm = (((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)) * 3600U) + \ + ((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)) * 60U) + \ + ((uint32_t)RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + } + + /* Check that requested alarm should expire in the same day (otherwise add 1 day) */ + if (counter_alarm < counter_time) + { + /* Add 1 day to alarm counter*/ + counter_alarm += (uint32_t)(24U * 3600U); + } + + /* Write alarm counter in RTC registers */ + if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA); + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + + __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); + + hrtc->State = HAL_RTC_STATE_READY; + + __HAL_UNLOCK(hrtc); + + return HAL_OK; + } +} + +/** + * @brief Gets the RTC Alarm value and masks. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm: Pointer to Date structure + * @param Alarm: Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: Alarm + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) +{ + uint32_t counter_alarm = 0U; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Alarm); + + /* Check input parameters */ + if ((hrtc == NULL) || (sAlarm == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + /* Read Alarm counter in RTC registers */ + counter_alarm = RTC_ReadAlarmCounter(hrtc); + + /* Fill the structure with the read parameters */ + /* Set hours in a day range (between 0 to 24)*/ + sAlarm->AlarmTime.Hours = (uint32_t)((counter_alarm / 3600U) % 24U); + sAlarm->AlarmTime.Minutes = (uint32_t)((counter_alarm % 3600U) / 60U); + sAlarm->AlarmTime.Seconds = (uint32_t)((counter_alarm % 3600U) % 60U); + + if (Format != RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_ByteToBcd2(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds); + } + + return HAL_OK; +} + +/** + * @brief Deactive the specified RTC Alarm + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Alarm: Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Alarm); + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + /* Set Initialization mode */ + if (RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Set to default values ALRH & ALRL registers */ + WRITE_REG(hrtc->Instance->ALRH, RTC_ALARM_RESETVALUE_REGISTER); + WRITE_REG(hrtc->Instance->ALRL, RTC_ALARM_RESETVALUE_REGISTER); + + /* RTC Alarm Interrupt Configuration: Disable EXTI configuration */ + __HAL_RTC_ALARM_EXTI_DISABLE_IT(); + + /* Wait for synchro */ + if (RTC_ExitInitMode(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief This function handles Alarm interrupt request. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc) +{ + if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA)) + { + /* Get the status of the Interrupt */ + if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != (uint32_t)RESET) + { + /* AlarmA callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->AlarmAEventCallback(hrtc); +#else + HAL_RTC_AlarmAEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clear the Alarm interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + } + } + + /* Clear the EXTI's line Flag for RTC Alarm */ + __HAL_RTC_ALARM_EXTI_CLEAR_FLAG(); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief This function handles AlarmA Polling request. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Returns the RTC state. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc) +{ + return hrtc->State; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + +@endverbatim + * @{ + */ + +/** + * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) + * are synchronized with RTC APB clock. + * @note This function must be called before any read operation after an APB reset + * or an APB clock stop. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0U; + + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Clear RSF flag */ + CLEAR_BIT(hrtc->Instance->CRL, RTC_FLAG_RSF); + + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while ((hrtc->Instance->CRL & RTC_FLAG_RSF) == (uint32_t)RESET) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @} + */ + + +/** + * @} + */ + +/** @addtogroup RTC_Private_Functions + * @{ + */ + + +/** + * @brief Read the time counter available in RTC_CNT registers. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval Time counter + */ +static uint32_t RTC_ReadTimeCounter(RTC_HandleTypeDef *hrtc) +{ + uint16_t high1 = 0U, high2 = 0U, low = 0U; + uint32_t timecounter = 0U; + + high1 = READ_REG(hrtc->Instance->CNTH & RTC_CNTH_RTC_CNT); + low = READ_REG(hrtc->Instance->CNTL & RTC_CNTL_RTC_CNT); + high2 = READ_REG(hrtc->Instance->CNTH & RTC_CNTH_RTC_CNT); + + if (high1 != high2) + { + /* In this case the counter roll over during reading of CNTL and CNTH registers, + read again CNTL register then return the counter value */ + timecounter = (((uint32_t) high2 << 16U) | READ_REG(hrtc->Instance->CNTL & RTC_CNTL_RTC_CNT)); + } + else + { + /* No counter roll over during reading of CNTL and CNTH registers, counter + value is equal to first value of CNTL and CNTH */ + timecounter = (((uint32_t) high1 << 16U) | low); + } + + return timecounter; +} + +/** + * @brief Write the time counter in RTC_CNT registers. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param TimeCounter: Counter to write in RTC_CNT registers + * @retval HAL status + */ +static HAL_StatusTypeDef RTC_WriteTimeCounter(RTC_HandleTypeDef *hrtc, uint32_t TimeCounter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Set Initialization mode */ + if (RTC_EnterInitMode(hrtc) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Set RTC COUNTER MSB word */ + WRITE_REG(hrtc->Instance->CNTH, (TimeCounter >> 16U)); + /* Set RTC COUNTER LSB word */ + WRITE_REG(hrtc->Instance->CNTL, (TimeCounter & RTC_CNTL_RTC_CNT)); + + /* Wait for synchro */ + if (RTC_ExitInitMode(hrtc) != HAL_OK) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Read the time counter available in RTC_ALR registers. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval Time counter + */ +static uint32_t RTC_ReadAlarmCounter(RTC_HandleTypeDef *hrtc) +{ + uint16_t high1 = 0U, low = 0U; + + high1 = READ_REG(hrtc->Instance->ALRH & RTC_CNTH_RTC_CNT); + low = READ_REG(hrtc->Instance->ALRL & RTC_CNTL_RTC_CNT); + + return (((uint32_t) high1 << 16U) | low); +} + +/** + * @brief Write the time counter in RTC_ALR registers. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param AlarmCounter: Counter to write in RTC_ALR registers + * @retval HAL status + */ +static HAL_StatusTypeDef RTC_WriteAlarmCounter(RTC_HandleTypeDef *hrtc, uint32_t AlarmCounter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Set Initialization mode */ + if (RTC_EnterInitMode(hrtc) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Set RTC COUNTER MSB word */ + WRITE_REG(hrtc->Instance->ALRH, (AlarmCounter >> 16U)); + /* Set RTC COUNTER LSB word */ + WRITE_REG(hrtc->Instance->ALRL, (AlarmCounter & RTC_ALRL_RTC_ALR)); + + /* Wait for synchro */ + if (RTC_ExitInitMode(hrtc) != HAL_OK) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Enters the RTC Initialization mode. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +static HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0U; + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while ((hrtc->Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + + return HAL_OK; +} + +/** + * @brief Exit the RTC Initialization mode. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +static HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0U; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while ((hrtc->Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Converts a 2 digit decimal to BCD format. + * @param Value: Byte to be converted + * @retval Converted byte + */ +static uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint32_t bcdhigh = 0U; + + while (Value >= 10U) + { + bcdhigh++; + Value -= 10U; + } + + return ((uint8_t)(bcdhigh << 4U) | Value); +} + +/** + * @brief Converts from 2 digit BCD to Binary. + * @param Value: BCD value to be converted + * @retval Converted word + */ +static uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint32_t tmp = 0U; + tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10U; + return (tmp + (Value & (uint8_t)0x0F)); +} + +/** + * @brief Updates date when time is 23:59:59. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param DayElapsed: Number of days elapsed from last date update + * @retval None + */ +static void RTC_DateUpdate(RTC_HandleTypeDef *hrtc, uint32_t DayElapsed) +{ + uint32_t year = 0U, month = 0U, day = 0U; + uint32_t loop = 0U; + + /* Get the current year*/ + year = hrtc->DateToUpdate.Year; + + /* Get the current month and day */ + month = hrtc->DateToUpdate.Month; + day = hrtc->DateToUpdate.Date; + + for (loop = 0U; loop < DayElapsed; loop++) + { + if ((month == 1U) || (month == 3U) || (month == 5U) || (month == 7U) || \ + (month == 8U) || (month == 10U) || (month == 12U)) + { + if (day < 31U) + { + day++; + } + /* Date structure member: day = 31 */ + else + { + if (month != 12U) + { + month++; + day = 1U; + } + /* Date structure member: day = 31 & month =12 */ + else + { + month = 1U; + day = 1U; + year++; + } + } + } + else if ((month == 4U) || (month == 6U) || (month == 9U) || (month == 11U)) + { + if (day < 30U) + { + day++; + } + /* Date structure member: day = 30 */ + else + { + month++; + day = 1U; + } + } + else if (month == 2U) + { + if (day < 28U) + { + day++; + } + else if (day == 28U) + { + /* Leap year */ + if (RTC_IsLeapYear(year)) + { + day++; + } + else + { + month++; + day = 1U; + } + } + else if (day == 29U) + { + month++; + day = 1U; + } + } + } + + /* Update year */ + hrtc->DateToUpdate.Year = year; + + /* Update day and month */ + hrtc->DateToUpdate.Month = month; + hrtc->DateToUpdate.Date = day; + + /* Update day of the week */ + hrtc->DateToUpdate.WeekDay = RTC_WeekDayNum(year, month, day); +} + +/** + * @brief Check whether the passed year is Leap or not. + * @param nYear year to check + * @retval 1: leap year + * 0: not leap year + */ +static uint8_t RTC_IsLeapYear(uint16_t nYear) +{ + if ((nYear % 4U) != 0U) + { + return 0U; + } + + if ((nYear % 100U) != 0U) + { + return 1U; + } + + if ((nYear % 400U) == 0U) + { + return 1U; + } + else + { + return 0U; + } +} + +/** + * @brief Determines the week number, the day number and the week day number. + * @param nYear year to check + * @param nMonth Month to check + * @param nDay Day to check + * @note Day is calculated with hypothesis that year > 2000 + * @retval Value which can take one of the following parameters: + * @arg RTC_WEEKDAY_MONDAY + * @arg RTC_WEEKDAY_TUESDAY + * @arg RTC_WEEKDAY_WEDNESDAY + * @arg RTC_WEEKDAY_THURSDAY + * @arg RTC_WEEKDAY_FRIDAY + * @arg RTC_WEEKDAY_SATURDAY + * @arg RTC_WEEKDAY_SUNDAY + */ +static uint8_t RTC_WeekDayNum(uint32_t nYear, uint8_t nMonth, uint8_t nDay) +{ + uint32_t year = 0U, weekday = 0U; + + year = 2000U + nYear; + + if (nMonth < 3U) + { + /*D = { [(23 x month)/9] + day + 4 + year + [(year-1)/4] - [(year-1)/100] + [(year-1)/400] } mod 7*/ + weekday = (((23U * nMonth) / 9U) + nDay + 4U + year + ((year - 1U) / 4U) - ((year - 1U) / 100U) + ((year - 1U) / 400U)) % 7U; + } + else + { + /*D = { [(23 x month)/9] + day + 4 + year + [year/4] - [year/100] + [year/400] - 2 } mod 7*/ + weekday = (((23U * nMonth) / 9U) + nDay + 4U + year + (year / 4U) - (year / 100U) + (year / 400U) - 2U) % 7U; + } + + return (uint8_t)weekday; +} + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c new file mode 100644 index 0000000..5f50219 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c @@ -0,0 +1,579 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rtc_ex.c + * @author MCD Application Team + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) Extension peripheral: + * + RTC Tamper functions + * + Extension Control functions + * + Extension RTC features functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/** @defgroup RTCEx RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/** @defgroup RTCEx_Exported_Functions_Group1 RTC Tamper functions + * @brief RTC Tamper functions + * +@verbatim + =============================================================================== + ##### RTC Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Tamper feature + +@endverbatim + * @{ + */ + +/** + * @brief Sets Tamper + * @note By calling this API we disable the tamper interrupt for all tampers. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTamper: Pointer to Tamper Structure. + * @note Tamper can be enabled only if ASOE and CCO bit are reset + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) +{ + /* Check input parameters */ + if ((hrtc == NULL) || (sTamper == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (HAL_IS_BIT_SET(BKP->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE))) + { + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + MODIFY_REG(BKP->CR, (BKP_CR_TPE | BKP_CR_TPAL), (sTamper->Tamper | (sTamper->Trigger))); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets Tamper with interrupt. + * @note By calling this API we force the tamper interrupt for all tampers. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTamper: Pointer to RTC Tamper. + * @note Tamper can be enabled only if ASOE and CCO bit are reset + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) +{ + /* Check input parameters */ + if ((hrtc == NULL) || (sTamper == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (HAL_IS_BIT_SET(BKP->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE))) + { + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + MODIFY_REG(BKP->CR, (BKP_CR_TPE | BKP_CR_TPAL), (sTamper->Tamper | (sTamper->Trigger))); + + /* Configure the Tamper Interrupt in the BKP->CSR */ + __HAL_RTC_TAMPER_ENABLE_IT(hrtc, RTC_IT_TAMP1); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates Tamper. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Tamper: Selected tamper pin. + * This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) +{ + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + /* Prevent unused argument(s) compilation warning */ + UNUSED(Tamper); + + assert_param(IS_RTC_TAMPER(Tamper)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the selected Tamper pin */ + CLEAR_BIT(BKP->CR, BKP_CR_TPE); + + /* Disable the Tamper Interrupt in the BKP->CSR */ + /* Configure the Tamper Interrupt in the BKP->CSR */ + __HAL_RTC_TAMPER_DISABLE_IT(hrtc, RTC_IT_TAMP1); + + /* Clear the Tamper interrupt pending bit */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); + SET_BIT(BKP->CSR, BKP_CSR_CTE); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief This function handles Tamper interrupt request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the status of the Interrupt */ + if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP1)) + { + /* Get the TAMPER Interrupt enable bit and pending bit */ + if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != (uint32_t)RESET) + { + /* Tamper callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->Tamper1EventCallback(hrtc); +#else + HAL_RTCEx_Tamper1EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clear the Tamper interrupt pending bit */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Tamper 1 callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file + */ +} + +/** + * @brief This function handles Tamper1 Polling. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Get the status of the Interrupt */ + while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == RESET) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group2 RTC Second functions + * @brief RTC Second functions + * +@verbatim + =============================================================================== + ##### RTC Second functions ##### + =============================================================================== + + [..] This section provides functions implementing second interupt handlers + +@endverbatim + * @{ + */ + +/** + * @brief Sets Interrupt for second + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc) +{ + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Enable Second interuption */ + __HAL_RTC_SECOND_ENABLE_IT(hrtc, RTC_IT_SEC); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates Second. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc) +{ + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Deactivate Second interuption*/ + __HAL_RTC_SECOND_DISABLE_IT(hrtc, RTC_IT_SEC); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief This function handles second interrupt request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc) +{ + if (__HAL_RTC_SECOND_GET_IT_SOURCE(hrtc, RTC_IT_SEC)) + { + /* Get the status of the Interrupt */ + if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_SEC)) + { + /* Check if Overrun occurred */ + if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_OW)) + { + /* Second error callback */ + HAL_RTCEx_RTCEventErrorCallback(hrtc); + + /* Clear flag Second */ + __HAL_RTC_OVERFLOW_CLEAR_FLAG(hrtc, RTC_FLAG_OW); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + } + else + { + /* Second callback */ + HAL_RTCEx_RTCEventCallback(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Clear flag Second */ + __HAL_RTC_SECOND_CLEAR_FLAG(hrtc, RTC_FLAG_SEC); + } + } +} + +/** + * @brief Second event callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_RTCEventCallback could be implemented in the user file + */ +} + +/** + * @brief Second event error callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_RTCEventErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extension Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Writes a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register + (+) Sets the Smooth calibration parameters. + +@endverbatim + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param BackupRegister: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to + * specify the register (depending devices). + * @param Data: Data to be written in the specified RTC Backup data register. + * @retval None + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t tmp = 0U; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)BKP_BASE; + tmp += (BackupRegister * 4U); + + *(__IO uint32_t *) tmp = (Data & BKP_DR1_D); +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param BackupRegister: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to + * specify the register (depending devices). + * @retval Read value + */ +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) +{ + uint32_t backupregister = 0U; + uint32_t pvalue = 0U; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + backupregister = (uint32_t)BKP_BASE; + backupregister += (BackupRegister * 4U); + + pvalue = (*(__IO uint32_t *)(backupregister)) & BKP_DR1_D; + + /* Read the specified register */ + return pvalue; +} + + +/** + * @brief Sets the Smooth calibration parameters. + * @param hrtc: RTC handle + * @param SmoothCalibPeriod: Not used (only present for compatibility with another families) + * @param SmoothCalibPlusPulses: Not used (only present for compatibility with another families) + * @param SmouthCalibMinusPulsesValue: specifies the RTC Clock Calibration value. + * This parameter must be a number between 0 and 0x7F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue) +{ + /* Check input parameters */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + /* Prevent unused argument(s) compilation warning */ + UNUSED(SmoothCalibPeriod); + UNUSED(SmoothCalibPlusPulses); + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Sets RTC Clock Calibration value.*/ + MODIFY_REG(BKP->RTCCR, BKP_RTCCR_CAL, SmouthCalibMinusPulsesValue); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c similarity index 95% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c index f4145e9..166cc52 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_sd.c + * @file stm32f1xx_hal_sd.c * @author MCD Application Team * @brief SD card HAL module driver. * This file provides firmware functions to manage the following @@ -10,17 +10,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -210,7 +199,7 @@ The compilation define USE_HAL_SD_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_SD_RegisterCallback() to register a user callback, + Use Functions @ref HAL_SD_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) TxCpltCallback : callback when a transmission transfer is completed. (+) RxCpltCallback : callback when a reception transfer is completed. @@ -221,7 +210,7 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_SD_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_SD_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) TxCpltCallback : callback when a transmission transfer is completed. (+) RxCpltCallback : callback when a reception transfer is completed. @@ -231,12 +220,12 @@ (+) MspDeInitCallback : SD MspDeInit. This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_SD_Init and if the state is HAL_SD_STATE_RESET + By default, after the @ref HAL_SD_Init and if the state is HAL_SD_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_SD_Init - and HAL_SD_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_SD_Init and HAL_SD_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_SD_Init + and @ref HAL_SD_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SD_Init and @ref HAL_SD_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -244,8 +233,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_SD_RegisterCallback before calling HAL_SD_DeInit - or HAL_SD_Init function. + using @ref HAL_SD_RegisterCallback before calling @ref HAL_SD_DeInit + or @ref HAL_SD_Init function. When The compilation define USE_HAL_SD_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -253,14 +242,25 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" #if defined(SDIO) -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -430,9 +430,6 @@ HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd) /* Enable SDIO Clock */ __HAL_SD_ENABLE(hsd); - /* Required power up waiting time before starting the SD initialization sequence */ - HAL_Delay(2); - /* Identify card operating voltage */ errorstate = SD_PowerON(hsd); if(errorstate != HAL_SD_ERROR_NONE) @@ -638,11 +635,7 @@ HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint3 /* Poll on SDIO flags */ dataremaining = config.DataLength; -#if defined(SDIO_STA_STBITERR) while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) -#endif /* SDIO_STA_STBITERR */ { if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF) && (dataremaining > 0U)) { @@ -853,11 +846,7 @@ HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint /* Write block(s) in polling mode */ dataremaining = config.DataLength; -#if defined(SDIO_STA_STBITERR) while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) -#endif /* SDIO_STA_STBITERR */ { if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE) && (dataremaining > 0U)) { @@ -1000,11 +989,7 @@ HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, ui hsd->pRxBuffPtr = pData; hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks; -#if defined(SDIO_STA_STBITERR) - __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF)); -#endif /* SDIO_STA_STBITERR */ if(hsd->SdCard.CardType != CARD_SDHC_SDXC) { @@ -1097,11 +1082,7 @@ HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, u hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks; /* Enable transfer interrupts */ -#if defined(SDIO_STA_STBITERR) - __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE)); -#endif /* SDIO_STA_STBITERR */ if(hsd->SdCard.CardType != CARD_SDHC_SDXC) { @@ -1190,11 +1171,7 @@ HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, u /* Initialize data control register */ hsd->Instance->DCTRL = 0U; -#if defined(SDIO_STA_STBITERR) - __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND)); -#endif /* SDIO_STA_STBITERR */ /* Set the DMA transfer complete callback */ hsd->hdmarx->XferCpltCallback = SD_DMAReceiveCplt; @@ -1207,7 +1184,7 @@ HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, u /* Force DMA Direction */ hsd->hdmarx->Init.Direction = DMA_PERIPH_TO_MEMORY; - MODIFY_REG(hsd->hdmarx->Instance->CR, DMA_SxCR_DIR, hsd->hdmarx->Init.Direction); + MODIFY_REG(hsd->hdmarx->Instance->CCR, DMA_CCR_DIR, hsd->hdmarx->Init.Direction); /* Enable the DMA Channel */ if(HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pData, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4U) != HAL_OK) @@ -1312,11 +1289,7 @@ HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, hsd->Instance->DCTRL = 0U; /* Enable SD Error interrupts */ -#if defined(SDIO_STA_STBITERR) - __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR)); -#endif /* SDIO_STA_STBITERR */ /* Set the DMA transfer complete callback */ hsd->hdmatx->XferCpltCallback = SD_DMATransmitCplt; @@ -1362,16 +1335,12 @@ HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, /* Force DMA Direction */ hsd->hdmatx->Init.Direction = DMA_MEMORY_TO_PERIPH; - MODIFY_REG(hsd->hdmatx->Instance->CR, DMA_SxCR_DIR, hsd->hdmatx->Init.Direction); + MODIFY_REG(hsd->hdmatx->Instance->CCR, DMA_CCR_DIR, hsd->hdmatx->Init.Direction); /* Enable the DMA Channel */ if(HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pData, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4U) != HAL_OK) { -#if defined(SDIO_STA_STBITERR) - __HAL_SD_DISABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ __HAL_SD_DISABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR)); -#endif /* SDIO_STA_STBITERR */ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); hsd->ErrorCode |= HAL_SD_ERROR_DMA; hsd->State = HAL_SD_STATE_READY; @@ -1524,15 +1493,9 @@ void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) { __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DATAEND); -#if defined(SDIO_STA_STBITERR) - __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ - SDIO_IT_TXUNDERR | SDIO_IT_RXOVERR | SDIO_IT_TXFIFOHE |\ - SDIO_IT_RXFIFOHF | SDIO_IT_STBITERR); -#else /* SDIO_STA_STBITERR not defined */ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ SDIO_IT_TXUNDERR | SDIO_IT_RXOVERR | SDIO_IT_TXFIFOHE |\ SDIO_IT_RXFIFOHF); -#endif /* SDIO_STA_STBITERR */ hsd->Instance->DCTRL &= ~(SDIO_DCTRL_DTEN); @@ -1615,11 +1578,7 @@ void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) SD_Write_IT(hsd); } -#if defined(SDIO_STA_STBITERR) - else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR | SDIO_FLAG_STBITERR) != RESET) -#else /* SDIO_STA_STBITERR not defined */ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR) != RESET) -#endif /* SDIO_STA_STBITERR */ { /* Set Error code */ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL) != RESET) @@ -1638,28 +1597,13 @@ void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) { hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; } -#if defined(SDIO_STA_STBITERR) - if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_STBITERR) != RESET) - { - hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; - } -#endif /* SDIO_STA_STBITERR */ -#if defined(SDIO_STA_STBITERR) /* Clear All flags */ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS | SDIO_FLAG_STBITERR); /* Disable all interrupts */ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR); -#else /* SDIO_STA_STBITERR not defined */ - /* Clear All flags */ - __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS); - - /* Disable all interrupts */ - __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ - SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); -#endif /* SDIO_STA_STBITERR */ hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance); @@ -2551,9 +2495,6 @@ static void SD_DMAError(DMA_HandleTypeDef *hdma) HAL_SD_CardStateTypeDef CardState; uint32_t RxErrorCode, TxErrorCode; - /* if DMA error is FIFO error ignore it */ - if(HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) - { RxErrorCode = hsd->hdmarx->ErrorCode; TxErrorCode = hsd->hdmatx->ErrorCode; if((RxErrorCode == HAL_DMA_ERROR_TE) || (TxErrorCode == HAL_DMA_ERROR_TE)) @@ -2581,7 +2522,6 @@ static void SD_DMAError(DMA_HandleTypeDef *hdma) #else HAL_SD_ErrorCallback(hsd); #endif - } } /** @@ -3275,3 +3215,5 @@ static void SD_Write_IT(SD_HandleTypeDef *hsd) */ #endif /* SDIO */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_smartcard.c similarity index 96% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_smartcard.c index 40a367a..18da2c4 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_smartcard.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_smartcard.c + * @file stm32f1xx_hal_smartcard.c * @author MCD Application Team * @brief SMARTCARD HAL module driver. * This file provides firmware functions to manage the following @@ -10,17 +10,6 @@ * + Peripheral Control functions * + Peripheral State and Error functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -40,12 +29,12 @@ (+++) Enable the NVIC USART IRQ handle. (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() and HAL_SMARTCARD_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Declare a DMA handle structure for the Tx/Rx channel. (+++) Enable the DMAx interface clock. (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx stream. + (+++) Configure the DMA Tx/Rx channel. (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx stream. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle (used for last byte sending completion detection in DMA non circular mode) @@ -116,8 +105,8 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback. - Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + Use Function @ref HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function @ref HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: (+) TxCpltCallback : Tx Complete Callback. (+) RxCpltCallback : Rx Complete Callback. (+) ErrorCallback : Error Callback. @@ -130,9 +119,9 @@ and a pointer to the user callback function. [..] - Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. - HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + @ref HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxCpltCallback : Tx Complete Callback. @@ -145,13 +134,13 @@ (+) MspDeInitCallback : SMARTCARD MspDeInit. [..] - By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + By default, after the @ref HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET all callbacks are set to the corresponding weak (surcharged) functions: - examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback(). + examples @ref HAL_SMARTCARD_TxCpltCallback(), @ref HAL_SMARTCARD_RxCpltCallback(). Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init() - and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit() + reset to the legacy weak (surcharged) functions in the @ref HAL_SMARTCARD_Init() + and @ref HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SMARTCARD_Init() and @ref HAL_SMARTCARD_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand). [..] @@ -160,8 +149,8 @@ in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit() - or HAL_SMARTCARD_Init() function. + using @ref HAL_SMARTCARD_RegisterCallback() before calling @ref HAL_SMARTCARD_DeInit() + or @ref HAL_SMARTCARD_Init() function. [..] When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or @@ -170,12 +159,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -272,11 +272,8 @@ static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDe between the two configurations. [..] The HAL_SMARTCARD_Init() function follows the USART SmartCard configuration - procedures (details for the procedures are available in reference manual - (RM0430 for STM32F4X3xx MCUs and RM0402 for STM32F412xx MCUs - RM0383 for STM32F411xC/E MCUs and RM0401 for STM32F410xx MCUs - RM0090 for STM32F4X5xx/STM32F4X7xx/STM32F429xx/STM32F439xx MCUs - RM0390 for STM32F446xx MCUs and RM0386 for STM32F469xx/STM32F479xx MCUs)). + procedures (details for the procedures are available in reference manuals + (RM0008 for STM32F10Xxx MCUs and RM0041 for STM32F100xx MCUs)). @endverbatim @@ -756,9 +753,9 @@ HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, * @param Timeout Timeout duration * @retval HAL status */ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout) { - const uint8_t *tmp = pData; + uint8_t *tmp = pData; uint32_t tickstart = 0U; if(hsc->gState == HAL_SMARTCARD_STATE_READY) @@ -876,7 +873,7 @@ HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *p * @param Size Amount of data to be sent * @retval HAL status */ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size) { /* Check that a Tx process is not already ongoing */ if(hsc->gState == HAL_SMARTCARD_STATE_READY) @@ -969,9 +966,9 @@ HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t * @param Size Amount of data to be sent * @retval HAL status */ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size) { - const uint32_t *tmp; + uint32_t *tmp; /* Check that a Tx process is not already ongoing */ if(hsc->gState == HAL_SMARTCARD_STATE_READY) @@ -1000,9 +997,9 @@ HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, const /* Set the DMA abort callback */ hsc->hdmatx->XferAbortCallback = NULL; - /* Enable the SMARTCARD transmit DMA stream */ - tmp = (const uint32_t*)&pData; - HAL_DMA_Start_IT(hsc->hdmatx, *(const uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size); + /* Enable the SMARTCARD transmit DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size); /* Clear the TC flag in the SR register by writing 0 to it */ __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC); @@ -1061,7 +1058,7 @@ HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_ /* Set the DMA abort callback */ hsc->hdmatx->XferAbortCallback = NULL; - /* Enable the DMA stream */ + /* Enable the DMA channel */ tmp = (uint32_t*)&pData; HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size); @@ -1921,12 +1918,11 @@ static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) } /** - * @brief This function handles SMARTCARD Communication Timeout. It waits - * until a flag is no longer in the specified status. + * @brief This function handles SMARTCARD Communication Timeout. * @param hsc Pointer to a SMARTCARD_HandleTypeDef structure that contains * the configuration information for SMARTCARD module. * @param Flag Specifies the SMARTCARD flag to check. - * @param Status The actual Flag status (SET or RESET). + * @param Status The new Flag status (SET or RESET). * @param Timeout Timeout duration * @param Tickstart Tick start value * @retval HAL status @@ -2328,19 +2324,11 @@ static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc) CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE)); /*-------------------------- USART BRR Configuration -----------------------*/ -#if defined(USART6) - if((hsc->Instance == USART1) || (hsc->Instance == USART6)) - { - pclk = HAL_RCC_GetPCLK2Freq(); - hsc->Instance->BRR = SMARTCARD_BRR(pclk, hsc->Init.BaudRate); - } -#else if(hsc->Instance == USART1) { pclk = HAL_RCC_GetPCLK2Freq(); hsc->Instance->BRR = SMARTCARD_BRR(pclk, hsc->Init.BaudRate); } -#endif /* USART6 */ else { pclk = HAL_RCC_GetPCLK1Freq(); @@ -2361,4 +2349,4 @@ static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc) * @} */ - +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c index 62d5d65..ac70153 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_spi.c + * @file stm32f1xx_hal_spi.c * @author MCD Application Team * @brief SPI HAL module driver. * This file provides firmware functions to manage the following @@ -9,17 +9,7 @@ * + IO operation functions * + Peripheral Control functions * + Peripheral State functions - ****************************************************************************** - * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -194,12 +184,24 @@ (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -211,11 +213,33 @@ /* Private typedef -----------------------------------------------------------*/ /* Private defines -----------------------------------------------------------*/ +#if (USE_SPI_CRC != 0U) && defined(SPI_CRC_ERROR_WORKAROUND_FEATURE) +/* CRC WORKAOUND FEATURE: Variable used to determine if device is impacted by implementation + * of workaround related to wrong CRC errors detection on SPI2. Conditions in which this workaround + * has to be applied, are: + * - STM32F101CDE/STM32F103CDE + * - Revision ID : Z + * - SPI2 + * - In receive only mode, with CRC calculation enabled, at the end of the CRC reception, + * the software needs to check the CRCERR flag. If it is found set, read back the SPI_RXCRC: + * + If the value is 0, the complete data transfer is successful. + * + Otherwise, one or more errors have been detected during the data transfer by CPU or DMA. + * If CRCERR is found reset, the complete data transfer is considered successful. + * + * Check RevisionID value for identifying if Device is Rev Z (0x0001) in order to enable workaround for + * CRC errors wrongly detected + */ +/* Pb is that ES_STM32F10xxCDE also identify an issue in Debug registers access while not in Debug mode + * Revision ID information is only available in Debug mode, so Workaround could not be implemented + * to distinguish Rev Z devices (issue present) from more recent version (issue fixed). + * So, in case of Revison Z F101 or F103 devices, below define should be assigned to 1. + */ +#define USE_SPI_CRC_ERROR_WORKAROUND 0U +#endif /** @defgroup SPI_Private_Constants SPI Private Constants * @{ */ #define SPI_DEFAULT_TIMEOUT 100U -#define SPI_BSY_FLAG_WORKAROUND_TIMEOUT 1000U /*!< Timeout 1000 µs */ /** * @} */ @@ -324,6 +348,8 @@ HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) assert_param(IS_SPI_NSS(hspi->Init.NSS)); assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + /* TI mode is not supported on this device. + TIMode parameter is mandatory equal to SPI_TIMODE_DISABLE */ assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) { @@ -405,8 +431,8 @@ HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); - /* Configure : NSS management, TI Mode */ - WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | (hspi->Init.TIMode & SPI_CR2_FRF))); + /* Configure : NSS management */ + WRITE_REG(hspi->Instance->CR2, ((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE)); #if (USE_SPI_CRC != 0U) /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ @@ -1059,6 +1085,12 @@ HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint1 /* freeze the CRC before the latest data */ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Check if CRCNEXT is well reseted by hardware */ + if (READ_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT)) + { + /* Workaround to force CRCNEXT bit to zero in case of CRCNEXT is not reset automatically by hardware */ + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } /* Read the latest data */ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) { @@ -1101,10 +1133,20 @@ HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint1 #if (USE_SPI_CRC != 0U) /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Check if CRC error is valid or not (workaround to be applied or not) */ + if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + } + else + { + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } } #endif /* USE_SPI_CRC */ @@ -1315,13 +1357,22 @@ HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxD } /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - /* Clear CRC Flag */ - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Check if CRC error is valid or not (workaround to be applied or not) */ + if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_ERROR; + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + + errorcode = HAL_ERROR; + } + else + { + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } } #endif /* USE_SPI_CRC */ @@ -2111,7 +2162,6 @@ HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) /* Clear the Error flags in the SR register */ __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); /* Restore hspi->state to ready */ hspi->State = HAL_SPI_STATE_READY; @@ -2273,7 +2323,6 @@ HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) /* Clear the Error flags in the SR register */ __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); /* Restore hspi->State to Ready */ hspi->State = HAL_SPI_STATE_READY; @@ -2396,8 +2445,8 @@ void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) } /* SPI in Error Treatment --------------------------------------------------*/ - if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) - || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET)) + && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) { /* SPI Overrun error interrupt occurred ----------------------------------*/ if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) @@ -2422,11 +2471,6 @@ void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) } /* SPI Frame error interrupt occurred ------------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); - __HAL_SPI_CLEAR_FREFLAG(hspi); - } if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) { @@ -2677,7 +2721,7 @@ static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) tickstart = HAL_GetTick(); /* DMA Normal Mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != DMA_SxCR_CIRC) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) { /* Disable ERR interrupt */ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); @@ -2737,7 +2781,7 @@ static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) tickstart = HAL_GetTick(); /* DMA Normal Mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != DMA_SxCR_CIRC) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) { /* Disable ERR interrupt */ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); @@ -2782,10 +2826,20 @@ static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) #if (USE_SPI_CRC != 0U) /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Check if CRC error is valid or not (workaround to be applied or not) */ + if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + } + else + { + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } } #endif /* USE_SPI_CRC */ @@ -2826,7 +2880,7 @@ static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) tickstart = HAL_GetTick(); /* DMA Normal Mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != DMA_SxCR_CIRC) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) { /* Disable ERR interrupt */ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); @@ -2862,10 +2916,20 @@ static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) #if (USE_SPI_CRC != 0U) /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Check if CRC error is valid or not (workaround to be applied or not) */ + if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + } + else + { + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } } #endif /* USE_SPI_CRC */ @@ -3037,7 +3101,6 @@ static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) /* Clear the Error flags in the SR register */ __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); /* Restore hspi->State to Ready */ hspi->State = HAL_SPI_STATE_READY; @@ -3098,7 +3161,6 @@ static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) /* Clear the Error flags in the SR register */ __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); /* Restore hspi->State to Ready */ hspi->State = HAL_SPI_STATE_READY; @@ -3154,7 +3216,7 @@ static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) */ static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) { - __IO uint8_t *ptmpreg8; + __IO uint8_t * ptmpreg8; __IO uint8_t tmpreg8 = 0; /* Initialize the 8bit temporary pointer */ @@ -3257,7 +3319,7 @@ static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) /* Read 16bit CRC to flush Data Register */ tmpreg = READ_REG(hspi->Instance->DR); /* To avoid GCC warning */ - UNUSED(tmpreg); + UNUSED(tmpreg); /* Disable RXNE interrupt */ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); @@ -3312,7 +3374,7 @@ static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) */ static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) { - __IO uint8_t *ptmpreg8; + __IO uint8_t * ptmpreg8; __IO uint8_t tmpreg8 = 0; /* Initialize the 8bit temporary pointer */ @@ -3344,6 +3406,13 @@ static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) { SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); } + /* Check if CRCNEXT is well reseted by hardware */ + if (READ_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT)) + { + /* Workaround to force CRCNEXT bit to zero in case of CRCNEXT is not reset automatically by hardware */ + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + #endif /* USE_SPI_CRC */ if (hspi->RxXferCount == 0U) @@ -3400,6 +3469,13 @@ static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) { SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); } + /* Check if CRCNEXT is well reseted by hardware */ + if (READ_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT)) + { + /* Workaround to force CRCNEXT bit to zero in case of CRCNEXT is not reset automatically by hardware */ + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + #endif /* USE_SPI_CRC */ if (hspi->RxXferCount == 0U) @@ -3524,7 +3600,7 @@ static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, return HAL_TIMEOUT; } /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ - if (count == 0U) + if(count == 0U) { tmp_timeout = 0U; } @@ -3552,32 +3628,19 @@ static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t __HAL_SPI_DISABLE(hspi); } - /* Erratasheet: BSY bit may stay high at the end of a data transfer in Slave mode */ - if (hspi->Init.Mode == SPI_MODE_MASTER) + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)) { - if (hspi->Init.Direction != SPI_DIRECTION_2LINES_RXONLY) + /* Wait the RXNE reset */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout, Tickstart) != HAL_OK) { - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - } - else - { - /* Wait the RXNE reset */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; } } else { - /* Wait the RXNE reset */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout, Tickstart) != HAL_OK) + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) { SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); return HAL_TIMEOUT; @@ -3595,35 +3658,12 @@ static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t */ static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) { - /* Timeout in µs */ - __IO uint32_t count = SPI_BSY_FLAG_WORKAROUND_TIMEOUT * (SystemCoreClock / 24U / 1000000U); - /* Erratasheet: BSY bit may stay high at the end of a data transfer in Slave mode */ - if (hspi->Init.Mode == SPI_MODE_MASTER) + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) { - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; } - else - { - /* Wait BSY flag during 1 Byte time transfer in case of Full-Duplex and Tx transfer - * If Timeout is reached, the transfer is considered as finish. - * User have to calculate the timeout value to fit with the time of 1 byte transfer. - * This time is directly link with the SPI clock from Master device. - */ - do - { - if (count == 0U) - { - break; - } - count--; - } while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_BSY) != RESET); - } - return HAL_OK; } @@ -3671,15 +3711,26 @@ static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) /* Check if CRC error occurred */ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) { - hspi->State = HAL_SPI_STATE_READY; - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - /* Call user error callback */ + /* Check if CRC error is valid or not (workaround to be applied or not) */ + if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + + /* Call user error callback */ #if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); + hspi->ErrorCallback(hspi); #else - HAL_SPI_ErrorCallback(hspi); + HAL_SPI_ErrorCallback(hspi); #endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } } else { @@ -3750,14 +3801,25 @@ static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) /* Check if CRC error occurred */ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - /* Call user error callback */ + /* Check if CRC error is valid or not (workaround to be applied or not) */ + if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + + /* Call user error callback */ #if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); + hspi->ErrorCallback(hspi); #else - HAL_SPI_ErrorCallback(hspi); + HAL_SPI_ErrorCallback(hspi); #endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } } else { @@ -3899,6 +3961,33 @@ static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) hspi->State = HAL_SPI_STATE_ABORT; } +#if (USE_SPI_CRC != 0U) +/** + * @brief Checks if encountered CRC error could be corresponding to wrongly detected errors + * according to SPI instance, Device type, and revision ID. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval CRC error validity (SPI_INVALID_CRC_ERROR or SPI_VALID_CRC_ERROR). + */ +uint8_t SPI_ISCRCErrorValid(SPI_HandleTypeDef *hspi) +{ +#if defined(SPI_CRC_ERROR_WORKAROUND_FEATURE) && (USE_SPI_CRC_ERROR_WORKAROUND != 0U) + /* Check how to handle this CRC error (workaround to be applied or not) */ + /* If CRC errors could be wrongly detected (issue 2.15.2 in STM32F10xxC/D/E silicon limitations ES (DocID14732 Rev 13) */ + if (hspi->Instance == SPI2) + { + if (hspi->Instance->RXCRCR == 0U) + { + return (SPI_INVALID_CRC_ERROR); + } + } +#endif + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + return (SPI_VALID_CRC_ERROR); +} +#endif /* USE_SPI_CRC */ /** * @} */ @@ -3913,3 +4002,4 @@ static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c similarity index 92% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c index ef2eaf0..4d5a31b 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c @@ -1,31 +1,20 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_sram.c + * @file stm32f1xx_hal_sram.c * @author MCD Application Team * @brief SRAM HAL module driver. * This file provides a generic firmware to drive SRAM memories * mounted as external device. * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This driver is a generic layered driver which contains a set of APIs used to - control SRAM memories. It uses the FMC layer functions to interface + control SRAM memories. It uses the FSMC layer functions to interface with SRAM devices. - The following sequence should be followed to configure the FMC/FSMC to interface + The following sequence should be followed to configure the FSMC to interface with SRAM/PSRAM memories: (#) Declare a SRAM_HandleTypeDef handle structure, for example: @@ -40,22 +29,22 @@ (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined base register instance for NOR or SRAM extended mode - (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended + (#) Declare two FSMC_NORSRAM_TimingTypeDef structures, for both normal and extended mode timings; for example: - FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming; + FSMC_NORSRAM_TimingTypeDef Timing and FSMC_NORSRAM_TimingTypeDef ExTiming; and fill its fields with the allowed values of the structure member. (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function performs the following sequence: (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit() - (##) Control register configuration using the FMC NORSRAM interface function - FMC_NORSRAM_Init() - (##) Timing register configuration using the FMC NORSRAM interface function - FMC_NORSRAM_Timing_Init() - (##) Extended mode Timing register configuration using the FMC NORSRAM interface function - FMC_NORSRAM_Extended_Timing_Init() - (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE() + (##) Control register configuration using the FSMC NORSRAM interface function + FSMC_NORSRAM_Init() + (##) Timing register configuration using the FSMC NORSRAM interface function + FSMC_NORSRAM_Timing_Init() + (##) Extended mode Timing register configuration using the FSMC NORSRAM interface function + FSMC_NORSRAM_Extended_Timing_Init() + (##) Enable the SRAM device using the macro __FSMC_NORSRAM_ENABLE() (#) At this stage you can perform read/write accesses from/to the memory connected to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the @@ -75,25 +64,25 @@ The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. - Use Functions HAL_SRAM_RegisterCallback() to register a user callback, + Use Functions @ref HAL_SRAM_RegisterCallback() to register a user callback, it allows to register following callbacks: (+) MspInitCallback : SRAM MspInit. (+) MspDeInitCallback : SRAM MspDeInit. This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - Use function HAL_SRAM_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_SRAM_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. It allows to reset following callbacks: (+) MspInitCallback : SRAM MspInit. (+) MspDeInitCallback : SRAM MspDeInit. This function) takes as parameters the HAL peripheral handle and the Callback ID. - By default, after the HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET + By default, after the @ref HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET all callbacks are reset to the corresponding legacy weak (surcharged) functions. Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_SRAM_Init - and HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_SRAM_Init and HAL_SRAM_DeInit + reset to the legacy weak (surcharged) functions in the @ref HAL_SRAM_Init + and @ref HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SRAM_Init and @ref HAL_SRAM_DeInit keep and use the user MspInit/MspDeInit callbacks (registered beforehand) Callbacks can be registered/unregistered in READY state only. @@ -101,8 +90,8 @@ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_SRAM_RegisterCallback before calling HAL_SRAM_DeInit - or HAL_SRAM_Init function. + using @ref HAL_SRAM_RegisterCallback before calling @ref HAL_SRAM_DeInit + or @ref HAL_SRAM_Init function. When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available @@ -110,14 +99,25 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -#if defined(FMC_Bank1) || defined(FSMC_Bank1) +#if defined(FSMC_BANK1) -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -165,11 +165,11 @@ static void SRAM_DMAError(DMA_HandleTypeDef *hdma); * @param ExtTiming Pointer to SRAM extended mode timing structure * @retval HAL status */ -HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, - FMC_NORSRAM_TimingTypeDef *ExtTiming) +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FSMC_NORSRAM_TimingTypeDef *Timing, + FSMC_NORSRAM_TimingTypeDef *ExtTiming) { /* Check the SRAM handle parameter */ - if (hsram == NULL) + if ((hsram == NULL) || (hsram->Init.BurstAccessMode == FSMC_BURST_ACCESS_MODE_ENABLE)) { return HAL_ERROR; } @@ -196,17 +196,17 @@ HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTyp } /* Initialize SRAM control Interface */ - (void)FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); + (void)FSMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); /* Initialize SRAM timing Interface */ - (void)FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); + (void)FSMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); /* Initialize SRAM extended mode timing Interface */ - (void)FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, + (void)FSMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode); /* Enable the NORSRAM device */ - __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); + __FSMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); /* Initialize the SRAM controller state */ hsram->State = HAL_SRAM_STATE_READY; @@ -236,7 +236,7 @@ HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram) #endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ /* Configure the SRAM registers with their reset values */ - (void)FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); + (void)FSMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); /* Reset the SRAM controller state */ hsram->State = HAL_SRAM_STATE_RESET; @@ -943,7 +943,7 @@ HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram) hsram->State = HAL_SRAM_STATE_BUSY; /* Enable write operation */ - (void)FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); + (void)FSMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); /* Update the SRAM controller state */ hsram->State = HAL_SRAM_STATE_READY; @@ -977,7 +977,7 @@ HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram) hsram->State = HAL_SRAM_STATE_BUSY; /* Disable write operation */ - (void)FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); + (void)FSMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); /* Update the SRAM controller state */ hsram->State = HAL_SRAM_STATE_PROTECTED; @@ -1107,4 +1107,6 @@ static void SRAM_DMAError(DMA_HandleTypeDef *hdma) * @} */ -#endif /* FMC_Bank1 || FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c similarity index 93% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c index 1ca1781..2c52efe 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_tim.c + * @file stm32f1xx_hal_tim.c * @author MCD Application Team * @brief TIM HAL module driver. * This file provides firmware functions to manage the following @@ -29,17 +29,6 @@ * + Commutation Event configuration with Interruption and DMA * + TIM OCRef clear configuration * + TIM External Clock configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### TIMER Generic features ##### @@ -114,14 +103,14 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function HAL_TIM_RegisterCallback() to register a callback. - HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + Use Function @ref HAL_TIM_RegisterCallback() to register a callback. + @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. [..] - Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default weak function. - HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, and the Callback ID. [..] @@ -157,7 +146,7 @@ [..] By default, after the Init and when the state is HAL_TIM_STATE_RESET all interrupt callbacks are set to the corresponding weak functions: - examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). [..] Exception done for MspInit and MspDeInit functions that are reset to the legacy weak @@ -171,7 +160,7 @@ all interrupt callbacks are set to the corresponding weak functions: in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. [..] When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or @@ -180,12 +169,23 @@ all interrupt callbacks are set to the corresponding weak functions: @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -365,30 +365,30 @@ HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) * @param htim TIM Base handle * @retval None */ -__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspDeInit could be implemented in the user file - */ -} +//__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +//{ +// /* Prevent unused argument(s) compilation warning */ +// UNUSED(htim); +// +// /* NOTE : This function should not be modified, when the callback is needed, +// the HAL_TIM_Base_MspInit could be implemented in the user file +// */ +//} +// +///** +// * @brief DeInitializes TIM Base MSP. +// * @param htim TIM Base handle +// * @retval None +// */ +//__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +//{ +// /* Prevent unused argument(s) compilation warning */ +// UNUSED(htim); +// +// /* NOTE : This function should not be modified, when the callback is needed, +// the HAL_TIM_Base_MspDeInit could be implemented in the user file +// */ +//} /** @@ -557,9 +557,9 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -875,7 +875,6 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -921,38 +920,34 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -968,8 +963,6 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1004,30 +997,26 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); } + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ - return status; + return HAL_OK; } /** @@ -1045,7 +1034,6 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -1083,9 +1071,9 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1105,9 +1093,9 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1127,9 +1115,9 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1148,9 +1136,9 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1161,38 +1149,34 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -1208,8 +1192,6 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1248,30 +1230,26 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); } + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ - return status; + return HAL_OK; } /** @@ -1538,9 +1516,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1584,38 +1560,34 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -1631,8 +1603,6 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1667,30 +1637,26 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); } + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ - return status; + return HAL_OK; } /** @@ -1708,7 +1674,6 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -1746,9 +1711,9 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1768,9 +1733,9 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1789,9 +1754,9 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1810,9 +1775,9 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1823,38 +1788,34 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -1870,8 +1831,6 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe */ HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1910,30 +1869,26 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); } + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ - return status; + return HAL_OK; } /** @@ -2193,9 +2148,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); @@ -2244,32 +2197,27 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - if (status == HAL_OK) + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) { - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -2285,8 +2233,6 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -2321,25 +2267,21 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ - return status; + return HAL_OK; } /** @@ -2357,9 +2299,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); @@ -2394,6 +2334,20 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the Input Capture channel */ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + switch (Channel) { case TIM_CHANNEL_1: @@ -2405,9 +2359,9 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -2426,9 +2380,9 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -2447,9 +2401,9 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -2468,9 +2422,9 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -2481,26 +2435,11 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } default: - status = HAL_ERROR; break; } - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - /* Return function status */ - return status; + return HAL_OK; } /** @@ -2516,8 +2455,6 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); @@ -2560,22 +2497,18 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ - return status; + return HAL_OK; } /** * @} @@ -3090,7 +3023,6 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_Ini /* Set the TI1 and the TI2 Polarities */ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); - tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); /* Write to TIMx SMCR */ @@ -3627,9 +3559,9 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -3637,12 +3569,11 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Enable the TIM Input Capture DMA request */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - /* Enable the Peripheral */ __HAL_TIM_ENABLE(htim); + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); break; } @@ -3654,9 +3585,9 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -3664,16 +3595,15 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Enable the TIM Input Capture DMA request */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - /* Enable the Peripheral */ __HAL_TIM_ENABLE(htim); + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); break; } - default: + case TIM_CHANNEL_ALL: { /* Set the DMA capture callbacks */ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; @@ -3682,9 +3612,9 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -3697,28 +3627,29 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; } - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); /* Enable the Capture compare channel */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); break; } + + default: + break; } /* Return function status */ @@ -4031,8 +3962,6 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CHANNELS(Channel)); assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); @@ -4084,13 +4013,12 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, } default: - status = HAL_ERROR; break; } __HAL_UNLOCK(htim); - return status; + return HAL_OK; } /** @@ -4108,8 +4036,6 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, */ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); @@ -4166,7 +4092,7 @@ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitT /* Set the IC3PSC value */ htim->Instance->CCMR2 |= sConfig->ICPrescaler; } - else if (Channel == TIM_CHANNEL_4) + else { /* TI4 Configuration */ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); @@ -4182,14 +4108,10 @@ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitT /* Set the IC4PSC value */ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); } - else - { - status = HAL_ERROR; - } __HAL_UNLOCK(htim); - return status; + return HAL_OK; } /** @@ -4209,8 +4131,6 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CHANNELS(Channel)); assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); @@ -4291,13 +4211,12 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, } default: - status = HAL_ERROR; break; } __HAL_UNLOCK(htim); - return status; + return HAL_OK; } /** @@ -4322,7 +4241,6 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel) { - HAL_StatusTypeDef status = HAL_OK; TIM_OC_InitTypeDef temp1; /* Check the parameters */ @@ -4353,7 +4271,6 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O TIM_OC1_SetConfig(htim->Instance, &temp1); break; } - case TIM_CHANNEL_2: { assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); @@ -4361,67 +4278,60 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O TIM_OC2_SetConfig(htim->Instance, &temp1); break; } - default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + switch (InputChannel) { - switch (InputChannel) + case TIM_CHANNEL_1: { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - default: - status = HAL_ERROR; - break; + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + break; } htim->State = HAL_TIM_STATE_READY; __HAL_UNLOCK(htim); - return status; + return HAL_OK; } else { @@ -4470,14 +4380,8 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) { - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - - return status; + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); } /** @@ -4523,8 +4427,6 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); @@ -4551,7 +4453,6 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint { /* nothing to do */ } - switch (BurstRequestSrc) { case TIM_DMA_UPDATE: @@ -4563,9 +4464,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4581,9 +4482,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4599,9 +4500,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4617,9 +4518,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4635,9 +4536,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4653,9 +4554,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4671,9 +4572,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4681,20 +4582,16 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint break; } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); /* Return function status */ - return status; + return HAL_OK; } /** @@ -4705,12 +4602,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint */ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - /* Abort the DMA transfer (at least disable the DMA stream) */ + /* Abort the DMA transfer (at least disable the DMA channel) */ switch (BurstRequestSrc) { case TIM_DMA_UPDATE: @@ -4749,21 +4644,17 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B break; } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; /* Return function status */ - return status; + return HAL_OK; } /** @@ -4807,13 +4698,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) { - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - return status; + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); } /** @@ -4859,8 +4745,6 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); @@ -4898,9 +4782,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4916,9 +4800,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4934,9 +4818,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4952,9 +4836,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4970,9 +4854,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -4988,9 +4872,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -5006,9 +4890,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) + DataLength) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -5016,21 +4900,17 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 break; } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); /* Return function status */ - return status; + return HAL_OK; } /** @@ -5041,12 +4921,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 */ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - /* Abort the DMA transfer (at least disable the DMA stream) */ + /* Abort the DMA transfer (at least disable the DMA channel) */ switch (BurstRequestSrc) { case TIM_DMA_UPDATE: @@ -5085,21 +4963,17 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t Bu break; } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; /* Return function status */ - return status; + return HAL_OK; } /** @@ -5163,8 +5037,6 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); @@ -5206,80 +5078,76 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + switch (Channel) { - switch (Channel) + case TIM_CHANNEL_1: { - case TIM_CHANNEL_1: + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 1 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - else - { - /* Disable the OCREF clear feature for Channel 1 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - break; + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); } - case TIM_CHANNEL_2: + else { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 2 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - else - { - /* Disable the OCREF clear feature for Channel 2 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - break; + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); } - case TIM_CHANNEL_3: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 3 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - else - { - /* Disable the OCREF clear feature for Channel 3 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - break; - } - case TIM_CHANNEL_4: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 4 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - else - { - /* Disable the OCREF clear feature for Channel 4 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - break; - } - default: - break; + break; } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; } htim->State = HAL_TIM_STATE_READY; __HAL_UNLOCK(htim); - return status; + return HAL_OK; } /** @@ -5291,7 +5159,6 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, */ HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Process Locked */ @@ -5412,23 +5279,22 @@ HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockCo case TIM_CLOCKSOURCE_ITR1: case TIM_CLOCKSOURCE_ITR2: case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports internal trigger input */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); - break; - } + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } default: - status = HAL_ERROR; break; } htim->State = HAL_TIM_STATE_READY; __HAL_UNLOCK(htim); - return status; + return HAL_OK; } /** @@ -5949,7 +5815,7 @@ HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Call default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } @@ -6015,14 +5881,14 @@ HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Call default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } else { /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; } /* Release Lock */ @@ -6214,7 +6080,7 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } @@ -6294,14 +6160,14 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } else { /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; } /* Release Lock */ @@ -7109,7 +6975,6 @@ static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; uint32_t tmpccmr1; uint32_t tmpccer; @@ -7206,18 +7071,16 @@ static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, case TIM_TS_ITR1: case TIM_TS_ITR2: case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - break; - } + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } default: - status = HAL_ERROR; break; } - - return status; + return HAL_OK; } /** @@ -7400,7 +7263,6 @@ static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, * This parameter can be one of the following values: * @arg TIM_ICPOLARITY_RISING * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE * @param TIM_ICSelection specifies the input to be used. * This parameter can be one of the following values: * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. @@ -7433,8 +7295,8 @@ static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); /* Select the Polarity and set the CC3E Bit */ - tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + tmpccer &= ~(TIM_CCER_CC3P); + tmpccer |= ((TIM_ICPolarity << 8U) & TIM_CCER_CC3P); /* Write to TIMx CCMR2 and CCER registers */ TIMx->CCMR2 = tmpccmr2; @@ -7448,7 +7310,6 @@ static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 * This parameter can be one of the following values: * @arg TIM_ICPOLARITY_RISING * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE * @param TIM_ICSelection specifies the input to be used. * This parameter can be one of the following values: * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. @@ -7481,8 +7342,8 @@ static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); /* Select the Polarity and set the CC4E Bit */ - tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + tmpccer &= ~(TIM_CCER_CC4P); + tmpccer |= ((TIM_ICPolarity << 12U) & TIM_CCER_CC4P); /* Write to TIMx CCMR2 and CCER registers */ TIMx->CCMR2 = tmpccmr2; @@ -7619,3 +7480,4 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim) /** * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c similarity index 89% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c index 092175f..79e46aa 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.c + * @file stm32f1xx_hal_tim_ex.c * @author MCD Application Team * @brief TIM HAL module driver. * This file provides firmware functions to manage the following @@ -10,17 +10,6 @@ * + Time Complementary signal break and dead time configuration * + Time Master and Slave synchronization configuration * + Timer remapping capabilities configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### TIMER Extended features ##### @@ -75,12 +64,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -527,7 +527,7 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32 /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - /* Enable the DMA stream for Capture 1*/ + /* Enable the DMA channel for Capture 1*/ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) { /* Return error status */ @@ -706,7 +706,6 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -746,38 +745,34 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chann default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -793,9 +788,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chann */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpccer; - /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); @@ -823,34 +816,30 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channe } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); } + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ - return status; + return HAL_OK; } /** @@ -868,7 +857,6 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channe */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -906,9 +894,9 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -927,9 +915,9 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -948,9 +936,9 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -961,35 +949,31 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) { - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -1005,8 +989,6 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); @@ -1037,27 +1019,23 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chann } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ - return status; + return HAL_OK; } /** @@ -1188,7 +1166,6 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -1227,38 +1204,34 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chan } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -1274,7 +1247,6 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chan */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpccer; /* Check the parameters */ @@ -1304,34 +1276,30 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chann } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); } + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ - return status; + return HAL_OK; } /** @@ -1349,7 +1317,6 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chann */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { - HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ @@ -1387,9 +1354,9 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1408,9 +1375,9 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1429,9 +1396,9 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - /* Enable the DMA stream */ + /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) + Length) != HAL_OK) { /* Return error status */ return HAL_ERROR; @@ -1442,35 +1409,31 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) { - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) { __HAL_TIM_ENABLE(htim); } } + else + { + __HAL_TIM_ENABLE(htim); + } /* Return function status */ - return status; + return HAL_OK; } /** @@ -1486,8 +1449,6 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); @@ -1518,27 +1479,23 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chan } default: - status = HAL_ERROR; break; } - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ - return status; + return HAL_OK; } /** @@ -2064,66 +2021,14 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, * @brief Configures the TIMx Remapping input capabilities. * @param htim TIM handle. * @param Remap specifies the TIM remapping source. - * For TIM1, the parameter can have the following values: (**) - * @arg TIM_TIM1_TIM3_TRGO: TIM1 ITR2 is connected to TIM3 TRGO - * @arg TIM_TIM1_LPTIM: TIM1 ITR2 is connected to LPTIM1 output - * - * For TIM2, the parameter can have the following values: (**) - * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 is connected to TIM8 TRGO (*) - * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 is connected to PTP trigger output (*) - * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 is connected to OTG FS SOF - * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 is connected to OTG FS SOF - * - * For TIM5, the parameter can have the following values: - * @arg TIM_TIM5_GPIO: TIM5 TI4 is connected to GPIO - * @arg TIM_TIM5_LSI: TIM5 TI4 is connected to LSI - * @arg TIM_TIM5_LSE: TIM5 TI4 is connected to LSE - * @arg TIM_TIM5_RTC: TIM5 TI4 is connected to the RTC wakeup interrupt - * @arg TIM_TIM5_TIM3_TRGO: TIM5 ITR1 is connected to TIM3 TRGO (*) - * @arg TIM_TIM5_LPTIM: TIM5 ITR1 is connected to LPTIM1 output (*) - * - * For TIM9, the parameter can have the following values: (**) - * @arg TIM_TIM9_TIM3_TRGO: TIM9 ITR1 is connected to TIM3 TRGO - * @arg TIM_TIM9_LPTIM: TIM9 ITR1 is connected to LPTIM1 output - * - * For TIM11, the parameter can have the following values: - * @arg TIM_TIM11_GPIO: TIM11 TI1 is connected to GPIO - * @arg TIM_TIM11_HSE: TIM11 TI1 is connected to HSE_RTC clock - * @arg TIM_TIM11_SPDIFRX: TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC (*) - * - * (*) Value not defined in all devices. \n - * (**) Register not available in all devices. * * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) { - - /* Check parameters */ - assert_param(IS_TIM_REMAP(htim->Instance, Remap)); - - __HAL_LOCK(htim); - -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) - if ((Remap & LPTIM_REMAP_MASK) == LPTIM_REMAP_MASK) - { - /* Connect TIMx internal trigger to LPTIM1 output */ - __HAL_RCC_LPTIM1_CLK_ENABLE(); - MODIFY_REG(LPTIM1->OR, - (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), - Remap & ~(LPTIM_REMAP_MASK)); - } - else - { - /* Set the Timer remapping configuration */ - WRITE_REG(htim->Instance->OR, Remap); - } -#else - /* Set the Timer remapping configuration */ - WRITE_REG(htim->Instance->OR, Remap); -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ - - __HAL_UNLOCK(htim); + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + UNUSED(Remap); return HAL_OK; } @@ -2250,7 +2155,7 @@ HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, */ /* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions * @{ */ @@ -2426,3 +2331,5 @@ static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Cha /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_rtc_alarm_template.c similarity index 63% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_rtc_alarm_template.c index e13c721..8802042 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_rtc_alarm_template.c @@ -1,63 +1,62 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_timebase_rtc_alarm_template.c + * @file stm32f1xx_hal_timebase_rtc_alarm_template.c * @author MCD Application Team - * @brief HAL time base based on the hardware RTC_ALARM Template. + * @brief HAL time base based on the hardware RTC_ALARM. * * This file override the native HAL time base functions (defined as weak) * to use the RTC ALARM for time base generation: * + Intializes the RTC peripheral to increment the seconds registers each 1ms - * + The alarm is configured to assert an interrupt when the RTC reaches 1ms + * + The alarm is configured to assert an interrupt when the RTC reaches 1ms * + HAL_IncTick is called at each Alarm event and the time is reset to 00:00:00 * + HSE (default), LSE or LSI can be selected as RTC clock source - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This file must be copied to the application folder and modified as follows: - (#) Rename it to 'stm32f4xx_hal_timebase_rtc_alarm.c' + (#) Rename it to 'stm32f1xx_hal_timebase_rtc_alarm.c' (#) Add this file and the RTC HAL drivers to your project and uncomment - HAL_RTC_MODULE_ENABLED define in stm32f4xx_hal_conf.h + HAL_RTC_MODULE_ENABLED define in stm32f1xx_hal_conf.h [..] (@) HAL RTC alarm and HAL RTC wakeup drivers cant be used with low power modes: The wake up capability of the RTC may be intrusive in case of prior low power mode configuration requiring different wake up sources. - Application/Example behavior is no more guaranteed - (@) The stm32f4xx_hal_timebase_tim use is recommended for the Applications/Examples + Application/Example behavior is no more guaranteed + (@) The stm32f1xx_hal_timebase_tim use is recommended for the Applications/Examples requiring low power modes @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +#include "stm32f1xx_hal.h" +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @defgroup HAL_TimeBase_RTC_Alarm_Template HAL TimeBase RTC Alarm Template * @{ - */ + */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ -/* Uncomment the line below to select the appropriate RTC Clock source for your application: +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing precision. @@ -68,15 +67,6 @@ /* #define RTC_CLOCK_SOURCE_LSE */ /* #define RTC_CLOCK_SOURCE_LSI */ -#ifdef RTC_CLOCK_SOURCE_HSE - #define RTC_ASYNCH_PREDIV 99U - #define RTC_SYNCH_PREDIV 9U - #define RCC_RTCCLKSOURCE_1MHZ ((uint32_t)((uint32_t)RCC_BDCR_RTCSEL | (uint32_t)((HSE_VALUE/1000000U) << 16U))) -#else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */ - #define RTC_ASYNCH_PREDIV 0U - #define RTC_SYNCH_PREDIV 31U -#endif /* RTC_CLOCK_SOURCE_HSE */ - /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ RTC_HandleTypeDef hRTC_Handle; @@ -85,9 +75,9 @@ void RTC_Alarm_IRQHandler(void); /* Private functions ---------------------------------------------------------*/ /** - * @brief This function configures the RTC_ALARMA as a time base source. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. + * @brief This function configures the RTC_ALARMA as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. * @note This function is called automatically at the beginning of program after * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). * @param TickPriority Tick interrupt priority. @@ -99,7 +89,7 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - HAL_StatusTypeDef status; + HAL_StatusTypeDef status; #ifdef RTC_CLOCK_SOURCE_LSE /* Configue LSE as RTC clock soucre */ @@ -118,148 +108,147 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; - /* Ensure that RTC is clocked by 1MHz */ - PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_1MHZ; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV128; #else #error Please select the RTC Clock source #endif /* RTC_CLOCK_SOURCE_LSE */ - status = HAL_RCC_OscConfig(&RCC_OscInitStruct); if (status == HAL_OK) { PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - } - if (status == HAL_OK) - { - /* Enable RTC Clock */ - __HAL_RCC_RTC_ENABLE(); - /* The time base should be 1ms - Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK - HSE as RTC clock - Time base = ((99 + 1) * (9 + 1)) / 1MHz - = 1ms - LSE as RTC clock - Time base = ((31 + 1) * (0 + 1)) / 32.768KHz - = ~1ms - LSI as RTC clock - Time base = ((31 + 1) * (0 + 1)) / 32KHz - = 1ms - */ - hRTC_Handle.Instance = RTC; - hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; - hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; - hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; - hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; - hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; - hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; - status = HAL_RTC_Init(&hRTC_Handle); + if (status == HAL_OK) + { + /* Enable RTC Clock */ + __HAL_RCC_RTC_ENABLE(); + + /* Configure RTC time base to 10Khz */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.AsynchPrediv = (HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_RTC) / 10000) - 1; + hRTC_Handle.Init.OutPut = RTC_OUTPUTSOURCE_NONE; + status = HAL_RTC_Init(&hRTC_Handle); + } } if (status == HAL_OK) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); - /* Disable the Alarm A interrupt */ - __HAL_RTC_ALARMA_DISABLE(&hRTC_Handle); - /* Clear flag alarm A */ __HAL_RTC_ALARM_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF); counter = 0U; - /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(&hRTC_Handle, RTC_FLAG_ALRAWF) == RESET) + /* Wait till RTC ALRAF flag is set and if Time out is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF) != RESET) { - if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ + if (counter++ == SystemCoreClock / 48U) /* Timeout = ~ 1s */ { - status = HAL_ERROR; + status = HAL_ERROR; } } } if (status == HAL_OK) { - hRTC_Handle.Instance->ALRMAR = (uint32_t)0x01U; - - /* Configure the Alarm state: Enable Alarm */ - __HAL_RTC_ALARMA_ENABLE(&hRTC_Handle); - /* Configure the Alarm interrupt */ - __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Set RTC COUNTER MSB word */ + hRTC_Handle.Instance->ALRH = 0x00U; + /* Set RTC COUNTER LSB word */ + hRTC_Handle.Instance->ALRL = 0x09U; /* RTC Alarm Interrupt Configuration: EXTI configuration */ __HAL_RTC_ALARM_EXTI_ENABLE_IT(); __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); - /* Check if the Initialization mode is set */ - if ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) - { - /* Set the Initialization mode */ - hRTC_Handle.Instance->ISR = (uint32_t)RTC_INIT_MASK; - counter = 0U; - while ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) - { - if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ - { - status = HAL_ERROR; - } - } - } - } - if (status == HAL_OK) - { - hRTC_Handle.Instance->DR = 0U; - hRTC_Handle.Instance->TR = 0U; + /* Clear Second and overflow flags */ + CLEAR_BIT(hRTC_Handle.Instance->CRL, (RTC_FLAG_SEC | RTC_FLAG_OW)); - hRTC_Handle.Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + /* Set RTC COUNTER MSB word */ + hRTC_Handle.Instance->CNTH = 0x00U; + /* Set RTC COUNTER LSB word */ + hRTC_Handle.Instance->CNTL = 0x00U; + + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); - /* Enable the RTC Alarm Interrupt */ + /* Wait till RTC is in INIT state and if Time out is reached exit */ + counter = 0U; + while ((hRTC_Handle.Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET) + { + if (counter++ == SystemCoreClock / 48U) /* Timeout = ~ 1s */ + { + status = HAL_ERROR; + } + } + } + if (status == HAL_OK) + { + /* Enable the RTC global Interrupt */ HAL_NVIC_EnableIRQ(RTC_Alarm_IRQn); /* Configure the SysTick IRQ priority */ if (TickPriority < (1UL << __NVIC_PRIO_BITS)) { - HAL_NVIC_SetPriority(RTC_Alarm_IRQn, TickPriority, 0U); + HAL_NVIC_SetPriority(RTC_Alarm_IRQn, TickPriority ,0U); uwTickPrio = TickPriority; } else { status = HAL_ERROR; } - } + return status; } /** * @brief Suspend Tick increment. * @note Disable the tick increment by disabling RTC ALARM interrupt. + * @param None * @retval None */ void HAL_SuspendTick(void) { - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Disable RTC ALARM update Interrupt */ __HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA); - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Resume Tick increment. * @note Enable the tick increment by Enabling RTC ALARM interrupt. + * @param None * @retval None */ void HAL_ResumeTick(void) { + __IO uint32_t counter = 0U; + /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + + /* Set RTC COUNTER MSB word */ + hRTC_Handle.Instance->CNTH = 0x00U; + /* Set RTC COUNTER LSB word */ + hRTC_Handle.Instance->CNTL = 0x00U; + + /* Clear Second and overflow flags */ + CLEAR_BIT(hRTC_Handle.Instance->CRL, (RTC_FLAG_SEC | RTC_FLAG_OW | RTC_FLAG_ALRAF)); + /* Enable RTC ALARM Update interrupt */ __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while ((hRTC_Handle.Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET) + { + if (counter++ == SystemCoreClock / 48U) /* Timeout = ~ 1s */ + { + break; + } + } } /** @@ -267,7 +256,7 @@ void HAL_ResumeTick(void) * @note This function is called when RTC_ALARM interrupt took place, inside * RTC_ALARM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment * a global variable "uwTick" used as application time base. - * @param hrtc RTC handle + * @param hrtc RTC handle * @retval None */ void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) @@ -278,24 +267,25 @@ void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - /* Set the Initialization mode */ - hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK; + /* Set RTC COUNTER MSB word */ + WRITE_REG(hrtc->Instance->CNTH, 0x00U); + /* Set RTC COUNTER LSB word */ + WRITE_REG(hrtc->Instance->CNTL, 0x00U); - while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + /* Clear Second and overflow flags */ + CLEAR_BIT(hrtc->Instance->CRL, (RTC_FLAG_SEC | RTC_FLAG_OW)); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while ((hrtc->Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET) { - if(counter++ == (SystemCoreClock /48U)) /* Timeout = ~ 1s */ + if (counter++ == SystemCoreClock / 48U) /* Timeout = ~ 1s */ { break; } } - - hrtc->Instance->DR = 0U; - hrtc->Instance->TR = 0U; - - hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); } /** @@ -315,4 +305,4 @@ void RTC_Alarm_IRQHandler(void) * @} */ - +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_tim_template.c similarity index 68% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_tim_template.c index affb884..1c4a1f3 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_timebase_tim_template.c @@ -1,37 +1,38 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_timebase_tim_template.c + * @file stm32f1xx_hal_timebase_tim_template.c * @author MCD Application Team * @brief HAL time base based on the hardware TIM Template. - * + * * This file overrides the native HAL time base functions (defined as weak) * the TIM time base: * + Intializes the TIM peripheral generate a Period elapsed Event each 1ms * + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms - * + * ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @addtogroup HAL_TimeBase_TIM * @{ - */ + */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ @@ -39,28 +40,29 @@ /* Private variables ---------------------------------------------------------*/ TIM_HandleTypeDef TimHandle; /* Private function prototypes -----------------------------------------------*/ -void TIM6_DAC_IRQHandler(void); +void TIM2_IRQHandler(void); /* Private functions ---------------------------------------------------------*/ /** - * @brief This function configures the TIM6 as a time base source. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. + * @brief This function configures the TIM2 as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). * @param TickPriority Tick interrupt priority. * @retval HAL status */ -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { RCC_ClkInitTypeDef clkconfig; uint32_t uwTimclock, uwAPB1Prescaler = 0U; uint32_t uwPrescalerValue = 0U; uint32_t pFLatency; - HAL_StatusTypeDef status; + HAL_StatusTypeDef status = HAL_OK; - /* Enable TIM6 clock */ - __HAL_RCC_TIM6_CLK_ENABLE(); + + /* Enable TIM2 clock */ + __HAL_RCC_TIM2_CLK_ENABLE(); /* Get clock configuration */ HAL_RCC_GetClockConfig(&clkconfig, &pFLatency); @@ -68,7 +70,7 @@ HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) /* Get APB1 prescaler */ uwAPB1Prescaler = clkconfig.APB1CLKDivider; - /* Compute TIM6 clock */ + /* Compute TIM2 clock */ if (uwAPB1Prescaler == RCC_HCLK_DIV1) { uwTimclock = HAL_RCC_GetPCLK1Freq(); @@ -78,14 +80,14 @@ HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) uwTimclock = 2 * HAL_RCC_GetPCLK1Freq(); } - /* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */ - uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U); + /* Compute the prescaler value to have TIM2 counter clock equal to 1MHz */ + uwPrescalerValue = (uint32_t)((uwTimclock / 1000000U) - 1U); - /* Initialize TIM6 */ - TimHandle.Instance = TIM6; + /* Initialize TIM2 */ + TimHandle.Instance = TIM2; /* Initialize TIMx peripheral as follow: - + Period = [(TIM6CLK/1000) - 1]. to have a (1/1000) s time base. + + Period = [(TIM2CLK/1000) - 1]. to have a (1/1000) s time base. + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock. + ClockDivision = 0 + Counter direction = Up @@ -102,13 +104,13 @@ HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) status = HAL_TIM_Base_Start_IT(&TimHandle); if (status == HAL_OK) { - /* Enable the TIM6 global Interrupt */ - HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn); + /* Enable the TIM2 global Interrupt */ + HAL_NVIC_EnableIRQ(TIM2_IRQn); if (TickPriority < (1UL << __NVIC_PRIO_BITS)) { - /* Enable the TIM6 global Interrupt */ - HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority, 0); + /*Configure the TIM2 IRQ priority */ + HAL_NVIC_SetPriority(TIM2_IRQn, TickPriority ,0); uwTickPrio = TickPriority; } else @@ -124,32 +126,32 @@ HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) /** * @brief Suspend Tick increment. - * @note Disable the tick increment by disabling TIM6 update interrupt. + * @note Disable the tick increment by disabling TIM2 update interrupt. * @retval None */ void HAL_SuspendTick(void) { - /* Disable TIM6 update Interrupt */ + /* Disable TIM2 update Interrupt */ __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE); } /** * @brief Resume Tick increment. - * @note Enable the tick increment by Enabling TIM6 update interrupt. + * @note Enable the tick increment by Enabling TIM2 update interrupt. * @retval None */ void HAL_ResumeTick(void) { - /* Enable TIM6 Update interrupt */ + /* Enable TIM2 Update interrupt */ __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE); } /** * @brief Period elapsed callback in non blocking mode - * @note This function is called when TIM6 interrupt took place, inside + * @note This function is called when TIM2 interrupt took place, inside * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment * a global variable "uwTick" used as application time base. - * @param htim TIM handle + * @param htim TIM handle * @retval None */ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) @@ -161,17 +163,17 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) * @brief This function handles TIM interrupt request. * @retval None */ -void TIM6_DAC_IRQHandler(void) +void TIM2_IRQHandler(void) { HAL_TIM_IRQHandler(&TimHandle); } /** * @} - */ + */ /** * @} - */ - + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c similarity index 91% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c index 36b7317..e56360a 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_uart.c + * @file stm32f1xx_hal_uart.c * @author MCD Application Team * @brief UART HAL module driver. * This file provides firmware functions to manage the following @@ -9,18 +9,6 @@ * + IO operation functions * + Peripheral Control functions * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -40,14 +28,14 @@ (+++) Enable the NVIC USART IRQ handle. (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() and HAL_UART_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Declare a DMA handle structure for the Tx/Rx channel. (+++) Enable the DMAx interface clock. (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx stream. + (+++) Configure the DMA Tx/Rx channel. (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the DMA Tx/Rx stream. + interrupt on the DMA Tx/Rx channel. (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle (used for last byte sending completion detection in DMA non circular mode) @@ -84,8 +72,8 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function HAL_UART_RegisterCallback() to register a user callback. - Function HAL_UART_RegisterCallback() allows to register following callbacks: + Use Function @ref HAL_UART_RegisterCallback() to register a user callback. + Function @ref HAL_UART_RegisterCallback() allows to register following callbacks: (+) TxHalfCpltCallback : Tx Half Complete Callback. (+) TxCpltCallback : Tx Complete Callback. (+) RxHalfCpltCallback : Rx Half Complete Callback. @@ -100,9 +88,9 @@ and a pointer to the user callback function. [..] - Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + Use function @ref HAL_UART_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. - HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + @ref HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxHalfCpltCallback : Tx Half Complete Callback. @@ -118,16 +106,16 @@ [..] For specific callback RxEventCallback, use dedicated registration/reset functions: - respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback(). [..] - By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET all callbacks are set to the corresponding weak (surcharged) functions: - examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback(). Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_UART_Init() - and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + reset to the legacy weak (surcharged) functions in the @ref HAL_UART_Init() + and @ref HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_UART_Init() and @ref HAL_UART_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand). [..] @@ -136,8 +124,8 @@ in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() - or HAL_UART_Init() function. + using @ref HAL_UART_RegisterCallback() before calling @ref HAL_UART_DeInit() + or @ref HAL_UART_Init() function. [..] When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or @@ -252,12 +240,23 @@ | 1 | 1 | | SB | 8 bit data | PB | STB | | +-------------------------------------------------------------+ ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -300,8 +299,7 @@ static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart); static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); -static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); static void UART_SetConfig(UART_HandleTypeDef *huart); /** @@ -337,11 +335,8 @@ static void UART_SetConfig(UART_HandleTypeDef *huart); [..] The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor configuration - procedures (details for the procedures are available in reference manual - (RM0430 for STM32F4X3xx MCUs and RM0402 for STM32F412xx MCUs - RM0383 for STM32F411xC/E MCUs and RM0401 for STM32F410xx MCUs - RM0090 for STM32F4X5xx/STM32F4X7xx/STM32F429xx/STM32F439xx MCUs - RM0390 for STM32F446xx MCUs and RM0386 for STM32F469xx/STM32F479xx MCUs)). + procedures (details for the procedures are available in reference manuals + (RM0008 for STM32F10Xxx MCUs and RM0041 for STM32F100xx MCUs)). @endverbatim * @{ @@ -365,9 +360,7 @@ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) /* Check the parameters */ if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) { - /* The hardware flow control is available only for USART1, USART2, USART3 and USART6. - Except for STM32F446xx devices, that is available for USART1, USART2, USART3, USART6, UART4 and UART5. - */ + /* The hardware flow control is available only for USART1, USART2 and USART3 */ assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); } @@ -376,7 +369,9 @@ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) assert_param(IS_UART_INSTANCE(huart->Instance)); } assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); +#if defined(USART_CR1_OVER8) assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); +#endif /* USART_CR1_OVER8 */ if (huart->gState == HAL_UART_STATE_RESET) { @@ -442,7 +437,9 @@ HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) /* Check the parameters */ assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); +#if defined(USART_CR1_OVER8) assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); +#endif /* USART_CR1_OVER8 */ if (huart->gState == HAL_UART_STATE_RESET) { @@ -518,7 +515,9 @@ HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLe /* Check the Break detection length parameter */ assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength)); +#if defined(USART_CR1_OVER8) assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling)); +#endif /* USART_CR1_OVER8 */ if (huart->gState == HAL_UART_STATE_RESET) { @@ -600,7 +599,9 @@ HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Add assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); assert_param(IS_UART_ADDRESS(Address)); assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); +#if defined(USART_CR1_OVER8) assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); +#endif /* USART_CR1_OVER8 */ if (huart->gState == HAL_UART_STATE_RESET) { @@ -751,8 +752,7 @@ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) * @param pCallback pointer to the Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, - pUART_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -1133,10 +1133,10 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) * @param Timeout Timeout duration * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) { - const uint8_t *pdata8bits; - const uint16_t *pdata16bits; + uint8_t *pdata8bits; + uint16_t *pdata16bits; uint32_t tickstart = 0U; /* Check that a Tx process is not already ongoing */ @@ -1163,7 +1163,7 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pD if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) { pdata8bits = NULL; - pdata16bits = (const uint16_t *) pData; + pdata16bits = (uint16_t *) pData; } else { @@ -1312,7 +1312,7 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui * @param Size Amount of data elements (u8 or u16) to be sent * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { /* Check that a Tx process is not already ongoing */ if (huart->gState == HAL_UART_STATE_READY) @@ -1373,7 +1373,7 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, /* Set Reception type to Standard reception */ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - return (UART_Start_Receive_IT(huart, pData, Size)); + return(UART_Start_Receive_IT(huart, pData, Size)); } else { @@ -1392,9 +1392,9 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, * @param Size Amount of data elements (u8 or u16) to be sent * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { - const uint32_t *tmp; + uint32_t *tmp; /* Check that a Tx process is not already ongoing */ if (huart->gState == HAL_UART_STATE_READY) @@ -1426,9 +1426,9 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t /* Set the DMA abort callback */ huart->hdmatx->XferAbortCallback = NULL; - /* Enable the UART transmit DMA stream */ - tmp = (const uint32_t *)&pData; - HAL_DMA_Start_IT(huart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&huart->Instance->DR, Size); + /* Enable the UART transmit DMA channel */ + tmp = (uint32_t *)&pData; + HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t *)tmp, (uint32_t)&huart->Instance->DR, Size); /* Clear the TC flag in the SR register by writing 0 to it */ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC); @@ -1438,7 +1438,7 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t /* Enable the DMA transfer for transmit request by setting the DMAT bit in the UART CR3 register */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); return HAL_OK; } @@ -1476,7 +1476,7 @@ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData /* Set Reception type to Standard reception */ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - return (UART_Start_Receive_DMA(huart, pData, Size)); + return(UART_Start_Receive_DMA(huart, pData, Size)); } else { @@ -1501,18 +1501,18 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) if ((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) { /* Disable the UART DMA Tx request */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); } dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); if ((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the UART DMA Rx request */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); } /* Process Unlocked */ @@ -1535,7 +1535,7 @@ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) if (huart->gState == HAL_UART_STATE_BUSY_TX) { /* Enable the UART DMA Tx request */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); } if (huart->RxState == HAL_UART_STATE_BUSY_RX) @@ -1544,14 +1544,11 @@ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) __HAL_UART_CLEAR_OREFLAG(huart); /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Enable the UART DMA Rx request */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); } /* Process Unlocked */ @@ -1579,9 +1576,9 @@ HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); if ((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - /* Abort the UART DMA Tx stream */ + /* Abort the UART DMA Tx channel */ if (huart->hdmatx != NULL) { HAL_DMA_Abort(huart->hdmatx); @@ -1593,9 +1590,9 @@ HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); if ((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - /* Abort the UART DMA Rx stream */ + /* Abort the UART DMA Rx channel */ if (huart->hdmarx != NULL) { HAL_DMA_Abort(huart->hdmarx); @@ -1621,8 +1618,7 @@ HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). * @retval HAL status */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, - uint32_t Timeout) +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout) { uint8_t *pdata8bits; uint16_t *pdata16bits; @@ -1694,14 +1690,14 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *p } else { - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) || ((huart->Init.WordLength == UART_WORDLENGTH_8B) && (huart->Init.Parity == UART_PARITY_NONE))) - { - *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); - } - else - { - *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); - } + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) || ((huart->Init.WordLength == UART_WORDLENGTH_8B) && (huart->Init.Parity == UART_PARITY_NONE))) + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } pdata8bits++; } @@ -1773,7 +1769,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { __HAL_UART_CLEAR_IDLEFLAG(huart); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); } else { @@ -1834,7 +1830,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { __HAL_UART_CLEAR_IDLEFLAG(huart); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); } else { @@ -1865,25 +1861,25 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) { /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } /* Disable the UART DMA Tx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - /* Abort the UART DMA Tx stream: use blocking DMA Abort API (no callback) */ + /* Abort the UART DMA Tx channel: use blocking DMA Abort API (no callback) */ if (huart->hdmatx != NULL) { /* Set the UART DMA Abort callback to Null. @@ -1906,9 +1902,9 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - /* Abort the UART DMA Rx stream: use blocking DMA Abort API (no callback) */ + /* Abort the UART DMA Rx channel: use blocking DMA Abort API (no callback) */ if (huart->hdmarx != NULL) { /* Set the UART DMA Abort callback to Null. @@ -1954,18 +1950,18 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) { /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); /* Disable the UART DMA Tx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - /* Abort the UART DMA Tx stream : use blocking DMA Abort API (no callback) */ + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ if (huart->hdmatx != NULL) { /* Set the UART DMA Abort callback to Null. @@ -2005,25 +2001,25 @@ HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - /* Abort the UART DMA Rx stream : use blocking DMA Abort API (no callback) */ + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ if (huart->hdmarx != NULL) { /* Set the UART DMA Abort callback to Null. @@ -2066,19 +2062,19 @@ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) { uint32_t AbortCplt = 0x01U; /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised @@ -2116,9 +2112,9 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { /* Disable DMA Tx at UART level */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - /* Abort the UART DMA Tx stream : use non blocking DMA Abort API (callback) */ + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ if (huart->hdmatx != NULL) { /* UART Tx DMA Abort callback has already been initialised : @@ -2139,9 +2135,9 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - /* Abort the UART DMA Rx stream : use non blocking DMA Abort API (callback) */ + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ if (huart->hdmarx != NULL) { /* UART Rx DMA Abort callback has already been initialised : @@ -2201,18 +2197,18 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) { /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); /* Disable the UART DMA Tx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - /* Abort the UART DMA Tx stream : use blocking DMA Abort API (no callback) */ + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ if (huart->hdmatx != NULL) { /* Set the UART DMA Abort callback : @@ -2278,25 +2274,25 @@ HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - /* Abort the UART DMA Rx stream : use blocking DMA Abort API (no callback) */ + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ if (huart->hdmarx != NULL) { /* Set the UART DMA Abort callback : @@ -2378,8 +2374,7 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) } /* If some errors occur */ - if ((errorflags != RESET) && (((cr3its & USART_CR3_EIE) != RESET) - || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET))) + if ((errorflags != RESET) && (((cr3its & USART_CR3_EIE) != RESET) || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET))) { /* UART parity error interrupt occurred ----------------------------------*/ if (((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET)) @@ -2400,8 +2395,7 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) } /* UART Over-Run interrupt occurred --------------------------------------*/ - if (((isrflags & USART_SR_ORE) != RESET) && (((cr1its & USART_CR1_RXNEIE) != RESET) - || ((cr3its & USART_CR3_EIE) != RESET))) + if (((isrflags & USART_SR_ORE) != RESET) && (((cr1its & USART_CR1_RXNEIE) != RESET) || ((cr3its & USART_CR3_EIE) != RESET))) { huart->ErrorCode |= HAL_UART_ERROR_ORE; } @@ -2428,9 +2422,9 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - /* Abort the UART DMA Rx stream */ + /* Abort the UART DMA Rx channel */ if (huart->hdmarx != NULL) { /* Set the UART DMA Abort callback : @@ -2486,9 +2480,9 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) /* Check current reception Mode : If Reception till IDLE event has been selected : */ - if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - && ((isrflags & USART_SR_IDLE) != 0U) - && ((cr1its & USART_SR_IDLE) != 0U)) + if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + &&((isrflags & USART_SR_IDLE) != 0U) + &&((cr1its & USART_SR_IDLE) != 0U)) { __HAL_UART_CLEAR_IDLEFLAG(huart); @@ -2500,8 +2494,8 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) (DMA cplt callback will be called). Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); - if ((nb_remaining_rx_data > 0U) - && (nb_remaining_rx_data < huart->RxXferSize)) + if ( (nb_remaining_rx_data > 0U) + &&(nb_remaining_rx_data < huart->RxXferSize)) { /* Reception is not complete */ huart->RxXferCount = nb_remaining_rx_data; @@ -2510,18 +2504,18 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) if (huart->hdmarx->Init.Mode != DMA_CIRCULAR) { /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the DMA transfer for the receiver request by resetting the DMAR bit in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); /* Last bytes received, so no need as the abort is immediate */ (void)HAL_DMA_Abort(huart->hdmarx); @@ -2532,7 +2526,7 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) #else /*Call legacy weak Rx Event callback*/ HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +#endif } return; } @@ -2542,27 +2536,27 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) /* Check received length : If all expected data are received, do nothing. Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; - if ((huart->RxXferCount > 0U) - && (nb_rx_data > 0U)) + if ( (huart->RxXferCount > 0U) + &&(nb_rx_data > 0U) ) { /* Disable the UART Parity Error Interrupt and RXNE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Rx process is completed, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx complete callback*/ huart->RxEventCallback(huart, nb_rx_data); #else /*Call legacy weak Rx Event callback*/ HAL_UARTEx_RxEventCallback(huart, nb_rx_data); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +#endif } return; } @@ -2761,7 +2755,7 @@ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_BUSY; /* Send break characters */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_SBK); + SET_BIT(huart->Instance->CR1, USART_CR1_SBK); huart->gState = HAL_UART_STATE_READY; @@ -2788,7 +2782,7 @@ HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_BUSY; /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RWU); + SET_BIT(huart->Instance->CR1, USART_CR1_RWU); huart->gState = HAL_UART_STATE_READY; @@ -2815,7 +2809,7 @@ HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_BUSY; /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); huart->gState = HAL_UART_STATE_READY; @@ -2987,16 +2981,16 @@ static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* DMA Normal mode*/ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { huart->TxXferCount = 0x00U; /* Disable the DMA transfer for transmit request by setting the DMAT bit in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); } /* DMA Circular mode */ @@ -3041,17 +3035,17 @@ static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* DMA Normal mode*/ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { huart->RxXferCount = 0U; /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the DMA transfer for the receiver request by setting the DMAR bit in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; @@ -3059,14 +3053,14 @@ static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); } } /* Check current reception Mode : If Reception till IDLE event has been selected : use Rx Event callback */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { + { #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx Event callback*/ huart->RxEventCallback(huart, huart->RxXferSize); @@ -3104,10 +3098,10 @@ static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) { #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize / 2U); + huart->RxEventCallback(huart, huart->RxXferSize/2U); #else /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ } else @@ -3161,18 +3155,16 @@ static void UART_DMAError(DMA_HandleTypeDef *hdma) } /** - * @brief This function handles UART Communication Timeout. It waits - * until a flag is no longer in the specified status. + * @brief This function handles UART Communication Timeout. * @param huart Pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param Flag specifies the UART flag to check. - * @param Status The actual Flag status (SET or RESET). + * @param Status The new Flag status (SET or RESET). * @param Tickstart Tick start value * @param Timeout Timeout duration * @retval HAL status */ -static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout) +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) { /* Wait until flag is set */ while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) @@ -3183,8 +3175,8 @@ static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout)) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; @@ -3222,11 +3214,8 @@ HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pDat /* Process Unlocked */ __HAL_UNLOCK(huart); - if (huart->Init.Parity != UART_PARITY_NONE) - { - /* Enable the UART Parity Error Interrupt */ - __HAL_UART_ENABLE_IT(huart, UART_IT_PE); - } + /* Enable the UART Parity Error Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_PE); /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ __HAL_UART_ENABLE_IT(huart, UART_IT_ERR); @@ -3280,18 +3269,15 @@ HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pDa /* Process Unlocked */ __HAL_UNLOCK(huart); - if (huart->Init.Parity != UART_PARITY_NONE) - { - /* Enable the UART Parity Error Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } + /* Enable the UART Parity Error Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Enable the DMA transfer for the receiver request by setting the DMAR bit in the UART CR3 register */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); return HAL_OK; } @@ -3304,7 +3290,7 @@ HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pDa static void UART_EndTxTransfer(UART_HandleTypeDef *huart) { /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); /* At end of Tx process, restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; @@ -3318,13 +3304,13 @@ static void UART_EndTxTransfer(UART_HandleTypeDef *huart) static void UART_EndRxTransfer(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); } /* At end of Rx process, restore huart->RxState to Ready */ @@ -3511,14 +3497,14 @@ static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) */ static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) { - const uint16_t *tmp; + uint16_t *tmp; /* Check that a Tx process is ongoing */ if (huart->gState == HAL_UART_STATE_BUSY_TX) { if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) { - tmp = (const uint16_t *) huart->pTxBuffPtr; + tmp = (uint16_t *) huart->pTxBuffPtr; huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); huart->pTxBuffPtr += 2U; } @@ -3529,7 +3515,7 @@ static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) if (--huart->TxXferCount == 0U) { - /* Disable the UART Transmit Data Register Empty Interrupt */ + /* Disable the UART Transmit Complete Interrupt */ __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); /* Enable the UART Transmit Complete Interrupt */ @@ -3627,7 +3613,7 @@ static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); /* Check if IDLE flag is set */ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) @@ -3642,17 +3628,17 @@ static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) #else /*Call legacy weak Rx Event callback*/ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +#endif } else { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); #else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ } @@ -3695,37 +3681,34 @@ static void UART_SetConfig(UART_HandleTypeDef *huart) Set TE and RE bits according to huart->Init.Mode value Set OVER8 bit according to huart->Init.OverSampling value */ +#if defined(USART_CR1_OVER8) tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling; MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), tmpreg); +#else + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode; + MODIFY_REG(huart->Instance->CR1, + (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE), + tmpreg); +#endif /* USART_CR1_OVER8 */ /*-------------------------- USART CR3 Configuration -----------------------*/ /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */ MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE), huart->Init.HwFlowCtl); -#if defined(USART6) && defined(UART9) && defined(UART10) - if ((huart->Instance == USART1) || (huart->Instance == USART6) || (huart->Instance == UART9) || (huart->Instance == UART10)) - { - pclk = HAL_RCC_GetPCLK2Freq(); - } -#elif defined(USART6) - if ((huart->Instance == USART1) || (huart->Instance == USART6)) - { - pclk = HAL_RCC_GetPCLK2Freq(); - } -#else - if (huart->Instance == USART1) - { - pclk = HAL_RCC_GetPCLK2Freq(); - } -#endif /* USART6 */ - else - { - pclk = HAL_RCC_GetPCLK1Freq(); - } + if(huart->Instance == USART1) + { + pclk = HAL_RCC_GetPCLK2Freq(); + } + else + { + pclk = HAL_RCC_GetPCLK1Freq(); + } + /*-------------------------- USART BRR Configuration ---------------------*/ +#if defined(USART_CR1_OVER8) if (huart->Init.OverSampling == UART_OVERSAMPLING_8) { huart->Instance->BRR = UART_BRR_SAMPLING8(pclk, huart->Init.BaudRate); @@ -3734,6 +3717,9 @@ static void UART_SetConfig(UART_HandleTypeDef *huart) { huart->Instance->BRR = UART_BRR_SAMPLING16(pclk, huart->Init.BaudRate); } +#else + huart->Instance->BRR = UART_BRR_SAMPLING16(pclk, huart->Init.BaudRate); +#endif /* USART_CR1_OVER8 */ } /** @@ -3749,3 +3735,4 @@ static void UART_SetConfig(UART_HandleTypeDef *huart) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_usart.c similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_usart.c index 8d71d59..9e9b788 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_usart.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_usart.c + * @file stm32f1xx_hal_usart.c * @author MCD Application Team * @brief USART HAL module driver. * This file provides firmware functions to manage the following @@ -9,18 +9,6 @@ * + Initialization and de-initialization functions * + IO operation functions * + Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -40,12 +28,12 @@ (+++) Enable the NVIC USART IRQ handle. (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Declare a DMA handle structure for the Tx/Rx channel. (+++) Enable the DMAx interface clock. (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx stream. + (+++) Configure the DMA Tx/Rx channel. (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx stream. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle (used for last byte sending completion detection in DMA non circular mode) @@ -194,12 +182,23 @@ | 1 | 1 | | SB | 8 bit data | PB | STB | | +-------------------------------------------------------------+ ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -244,8 +243,7 @@ static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma); static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); /** * @} */ @@ -280,11 +278,8 @@ static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husar [..] The HAL_USART_Init() function follows the USART synchronous configuration - procedures (details for the procedures are available in reference manual - (RM0430 for STM32F4X3xx MCUs and RM0402 for STM32F412xx MCUs - RM0383 for STM32F411xC/E MCUs and RM0401 for STM32F410xx MCUs - RM0090 for STM32F4X5xx/STM32F4X7xx/STM32F429xx/STM32F439xx MCUs - RM0390 for STM32F446xx MCUs and RM0386 for STM32F469xx/STM32F479xx MCUs)). + procedures (details for the procedures are available in reference manuals + (RM0008 for STM32F10Xxx MCUs and RM0041 for STM32F100xx MCUs)). @endverbatim * @{ @@ -442,8 +437,7 @@ __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) * @param pCallback pointer to the Callback function * @retval HAL status + */ -HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, - pUSART_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, pUSART_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -747,10 +741,10 @@ HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_ * @param Timeout Timeout duration. * @retval HAL status */ -HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, uint32_t Timeout) +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout) { - const uint8_t *ptxdata8bits; - const uint16_t *ptxdata16bits; + uint8_t *ptxdata8bits; + uint16_t *ptxdata16bits; uint32_t tickstart; if (husart->State == HAL_USART_STATE_READY) @@ -776,7 +770,7 @@ HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) { ptxdata8bits = NULL; - ptxdata16bits = (const uint16_t *) pTxData; + ptxdata16bits = (uint16_t *) pTxData; } else { @@ -937,13 +931,12 @@ HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxDat * @param Timeout Timeout duration * @retval HAL status */ -HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size, uint32_t Timeout) +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) { uint8_t *prxdata8bits; uint16_t *prxdata16bits; - const uint8_t *ptxdata8bits; - const uint16_t *ptxdata16bits; + uint8_t *ptxdata8bits; + uint16_t *ptxdata16bits; uint16_t rxdatacount; uint32_t tickstart; @@ -983,7 +976,7 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const u { prxdata8bits = NULL; ptxdata8bits = NULL; - ptxdata16bits = (const uint16_t *) pTxData; + ptxdata16bits = (uint16_t *) pTxData; prxdata16bits = (uint16_t *) pRxData; } else @@ -1015,14 +1008,14 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const u else { husart->Instance->DR = (uint8_t)(*ptxdata8bits & (uint8_t)0xFF); - ptxdata8bits++; + ptxdata8bits++; } husart->TxXferCount--; } if (husart->RxXferCount > 0U) - { + { /* Wait for RXNE Flag */ if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) { @@ -1077,7 +1070,7 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const u * @retval HAL status * @note The USART errors are not managed to avoid the overrun error. */ -HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) { if (husart->State == HAL_USART_STATE_READY) { @@ -1151,16 +1144,8 @@ HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRx /* Process Unlocked */ __HAL_UNLOCK(husart); - if (husart->Init.Parity != USART_PARITY_NONE) - { - /* Enable the USART Parity Error and Data Register not empty Interrupts */ - SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - } - else - { - /* Enable the USART Data Register not empty Interrupts */ - SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE); - } + /* Enable the USART Parity Error and Data Register not empty Interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ SET_BIT(husart->Instance->CR3, USART_CR3_EIE); @@ -1188,8 +1173,7 @@ HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRx * @param Size Amount of data elements (u8 or u16) to be sent (same amount to be received). * @retval HAL status */ -HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size) +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) { if (husart->State == HAL_USART_STATE_READY) { @@ -1216,11 +1200,8 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, cons /* Enable the USART Data Register not empty Interrupt */ SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE); - if (husart->Init.Parity != USART_PARITY_NONE) - { - /* Enable the USART Parity Error Interrupt */ - SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); - } + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ SET_BIT(husart->Instance->CR3, USART_CR3_EIE); @@ -1247,9 +1228,9 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, cons * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ -HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) { - const uint32_t *tmp; + uint32_t *tmp; if (husart->State == HAL_USART_STATE_READY) { @@ -1279,9 +1260,9 @@ HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint /* Set the DMA abort callback */ husart->hdmatx->XferAbortCallback = NULL; - /* Enable the USART transmit DMA stream */ - tmp = (const uint32_t *)&pTxData; - HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->DR, Size); + /* Enable the USART transmit DMA channel */ + tmp = (uint32_t *)&pTxData; + HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->DR, Size); /* Clear the TC flag in the SR register by writing 0 to it */ __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC); @@ -1311,7 +1292,7 @@ HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint * @param pRxData Pointer to data buffer (u8 or u16 data elements). * @param Size Amount of data elements (u8 or u16) to be received. * @retval HAL status - * @note The USART DMA transmit stream must be configured in order to generate the clock for the slave. + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. */ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) @@ -1359,11 +1340,11 @@ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pR /* Set the DMA AbortCpltCallback */ husart->hdmatx->XferAbortCallback = NULL; - /* Enable the USART receive DMA stream */ + /* Enable the USART receive DMA channel */ tmp = (uint32_t *)&pRxData; HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t *)tmp, Size); - /* Enable the USART transmit DMA stream: the transmit stream is used in order + /* Enable the USART transmit DMA channel: the transmit channel is used in order to generate in the non-blocking mode the clock to the slave device, this mode isn't a simplex receive mode but a full-duplex receive one */ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->DR, Size); @@ -1374,11 +1355,8 @@ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pR /* Process Unlocked */ __HAL_UNLOCK(husart); - if (husart->Init.Parity != USART_PARITY_NONE) - { - /* Enable the USART Parity Error Interrupt */ - SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); - } + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ SET_BIT(husart->Instance->CR3, USART_CR3_EIE); @@ -1412,10 +1390,9 @@ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pR * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. * @retval HAL status */ -HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size) +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) { - const uint32_t *tmp; + uint32_t *tmp; if (husart->State == HAL_USART_STATE_READY) { @@ -1455,13 +1432,13 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, con /* Set the DMA abort callback */ husart->hdmarx->XferAbortCallback = NULL; - /* Enable the USART receive DMA stream */ + /* Enable the USART receive DMA channel */ tmp = (uint32_t *)&pRxData; - HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(const uint32_t *)tmp, Size); + HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t *)tmp, Size); - /* Enable the USART transmit DMA stream */ - tmp = (const uint32_t *)&pTxData; - HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->DR, Size); + /* Enable the USART transmit DMA channel */ + tmp = (uint32_t *)&pTxData; + HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->DR, Size); /* Clear the TC flag in the SR register by writing 0 to it */ __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC); @@ -1472,11 +1449,8 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, con /* Process Unlocked */ __HAL_UNLOCK(husart); - if (husart->Init.Parity != USART_PARITY_NONE) - { - /* Enable the USART Parity Error Interrupt */ - SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); - } + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ SET_BIT(husart->Instance->CR3, USART_CR3_EIE); @@ -1599,7 +1573,7 @@ HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) { /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ @@ -1665,7 +1639,7 @@ HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status - */ +*/ HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart) { uint32_t AbortCplt = 0x01U; @@ -2128,7 +2102,7 @@ static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) { USART_HandleTypeDef *husart = (USART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* DMA Normal mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { husart->TxXferCount = 0U; if (husart->State == HAL_USART_STATE_BUSY_TX) @@ -2186,7 +2160,7 @@ static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) { USART_HandleTypeDef *husart = (USART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* DMA Normal mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { husart->RxXferCount = 0x00U; @@ -2309,18 +2283,16 @@ static void USART_DMAError(DMA_HandleTypeDef *hdma) } /** - * @brief This function handles USART Communication Timeout. It waits - * until a flag is no longer in the specified status. + * @brief This function handles USART Communication Timeout. * @param husart Pointer to a USART_HandleTypeDef structure that contains * the configuration information for the specified USART module. * @param Flag specifies the USART flag to check. - * @param Status The actual Flag status (SET or RESET). + * @param Status The new Flag status (SET or RESET). * @param Tickstart Tick start value. * @param Timeout Timeout duration. * @retval HAL status */ -static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout) +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) { /* Wait until flag is set */ while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status) @@ -2499,13 +2471,13 @@ static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) */ static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart) { - const uint16_t *tmp; + uint16_t *tmp; if (husart->State == HAL_USART_STATE_BUSY_TX) { if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) { - tmp = (const uint16_t *) husart->pTxBuffPtr; + tmp = (uint16_t *) husart->pTxBuffPtr; husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); husart->pTxBuffPtr += 2U; } @@ -2641,8 +2613,8 @@ static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart) */ static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart) { - const uint16_t *pdatatx16bits; - uint16_t *pdatarx16bits; + uint8_t *pdata8bits; + uint16_t *pdata16bits; if (husart->State == HAL_USART_STATE_BUSY_TX_RX) { @@ -2652,8 +2624,9 @@ static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart) { if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) { - pdatatx16bits = (const uint16_t *) husart->pTxBuffPtr; - husart->Instance->DR = (uint16_t)(*pdatatx16bits & (uint16_t)0x01FF); + pdata8bits = NULL; + pdata16bits = (uint16_t *) husart->pTxBuffPtr; + husart->Instance->DR = (uint16_t)(*pdata16bits & (uint16_t)0x01FF); husart->pTxBuffPtr += 2U; } else @@ -2677,19 +2650,22 @@ static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart) { if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) { - pdatarx16bits = (uint16_t *) husart->pRxBuffPtr; - *pdatarx16bits = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); - husart->pRxBuffPtr += 2U; + pdata8bits = NULL; + pdata16bits = (uint16_t *) husart->pRxBuffPtr; + *pdata16bits = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); + husart->pRxBuffPtr += 2U; } else { + pdata8bits = (uint8_t *) husart->pRxBuffPtr; + pdata16bits = NULL; if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE))) { - *husart->pRxBuffPtr = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); + *pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); } else { - *husart->pRxBuffPtr = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); + *pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); } husart->pRxBuffPtr += 1U; } @@ -2774,16 +2750,15 @@ static void USART_SetConfig(USART_HandleTypeDef *husart) /*-------------------------- USART CR1 Configuration -----------------------*/ tmpreg = husart->Instance->CR1; - /* Clear M, PCE, PS, TE, RE and OVER8 bits */ - tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ - USART_CR1_RE | USART_CR1_OVER8)); + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)); /* Configure the USART Word Length, Parity and mode: Set the M bits according to husart->Init.WordLength value Set PCE and PS bits according to husart->Init.Parity value Set TE and RE bits according to husart->Init.Mode value - Force OVER8 bit to 1 in order to reach the max USART frequencies */ - tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; + */ + tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode; /* Write to USART CR1 */ WRITE_REG(husart->Instance->CR1, (uint32_t)tmpreg); @@ -2793,25 +2768,11 @@ static void USART_SetConfig(USART_HandleTypeDef *husart) CLEAR_BIT(husart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE)); /*-------------------------- USART BRR Configuration -----------------------*/ -#if defined(USART6) && defined(UART9) && defined(UART10) - if ((husart->Instance == USART1) || (husart->Instance == USART6) || (husart->Instance == UART9) || (husart->Instance == UART10)) - { - pclk = HAL_RCC_GetPCLK2Freq(); - husart->Instance->BRR = USART_BRR(pclk, husart->Init.BaudRate); - } -#elif defined(USART6) - if((husart->Instance == USART1) || (husart->Instance == USART6)) + if((husart->Instance == USART1)) { pclk = HAL_RCC_GetPCLK2Freq(); husart->Instance->BRR = USART_BRR(pclk, husart->Init.BaudRate); } -#else - if(husart->Instance == USART1) - { - pclk = HAL_RCC_GetPCLK2Freq(); - husart->Instance->BRR = USART_BRR(pclk, husart->Init.BaudRate); - } -#endif /* USART6 || UART9 || UART10 */ else { pclk = HAL_RCC_GetPCLK1Freq(); @@ -2836,3 +2797,4 @@ static void USART_SetConfig(USART_HandleTypeDef *husart) * @} */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_wwdg.c similarity index 94% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_wwdg.c index 216ea2b..730775b 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_wwdg.c @@ -1,23 +1,12 @@ /** ****************************************************************************** - * @file stm32f4xx_hal_wwdg.c + * @file stm32f1xx_hal_wwdg.c * @author MCD Application Team * @brief WWDG HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Window Watchdog (WWDG) peripheral: * + Initialization and Configuration functions * + IO operation functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### WWDG Specific features ##### @@ -50,11 +39,11 @@ (++) min time (mS) = 1000 * (Counter - Window) / WWDG clock (++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock (+) Typical values: - (++) Counter min (T[5;0] = 0x00) at 42MHz (PCLK1) with zero prescaler: - max timeout before reset: approximately 97.52us - (++) Counter max (T[5;0] = 0x3F) at 42MHz (PCLK1) with prescaler + (++) Counter min (T[5;0] = 0x00) at 36MHz (PCLK1) with zero prescaler: + max timeout before reset: approximately 910s + (++) Counter max (T[5;0] = 0x3F) at 36MHz (PCLK1) with prescaler dividing by 8: - max timeout before reset: approximately 49.93ms + max timeout before reset: approximately 58.25ms ##### How to use this driver ##### ============================================================================== @@ -66,7 +55,7 @@ (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). (+) Configure the WWDG prescaler, refresh window value, counter value and early interrupt status using HAL_WWDG_Init() function. This will automatically - enable WWDG and start its downcounter. Time reference can be taken from + enable WWDG and start its downcounter. Time reference can be taken from function exit. Care must be taken to provide a counter value greater than 0x40 to prevent generation of immediate reset. (+) If the Early Wakeup Interrupt (EWI) feature is enabled, an interrupt is @@ -123,12 +112,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -418,3 +418,5 @@ __weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_adc.c similarity index 78% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_adc.c index 5f880ff..b31e0c6 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_adc.c @@ -1,25 +1,27 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_adc.c + * @file stm32f1xx_ll_adc.c * @author MCD Application Team * @brief ADC LL module driver ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ + #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_adc.h" -#include "stm32f4xx_ll_bus.h" +#include "stm32f1xx_ll_adc.h" +#include "stm32f1xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" @@ -27,7 +29,7 @@ #define assert_param(expr) ((void)0U) #endif -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -48,22 +50,8 @@ /* Check of parameters for configuration of ADC hierarchical scope: */ /* common to several ADC instances. */ -#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ - ( ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ - || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ - || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV6) \ - || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV8) \ - ) - /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC instance. */ -#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ - ( ((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ - || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ - || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ - || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ - ) - #define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ ( ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ @@ -81,25 +69,56 @@ /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC group regular */ +#if defined(ADC3) +#define IS_LL_ADC_REG_TRIG_SOURCE(__ADC_INSTANCE__, __REG_TRIG_SOURCE__) \ + ((((__ADC_INSTANCE__) == ADC1) || ((__ADC_INSTANCE__) == ADC2)) \ + ? ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO) \ + ) \ + : \ + ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO_ADC3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH3) \ + ) \ + ) +#else +#if defined (STM32F101xE) || defined (STM32F105xC) || defined (STM32F107xC) #define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH4) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH1) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH2) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH3) \ - || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO) \ + ) +#else +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ ) +#endif +#endif #define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ ( ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ @@ -107,15 +126,9 @@ #define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ ( ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ - || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ ) -#define IS_LL_ADC_REG_FLAG_EOC_SELECTION(__REG_FLAG_EOC_SELECTION__) \ - ( ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV) \ - || ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_UNITARY_CONV) \ - ) - #define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ ( ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ @@ -149,32 +162,56 @@ /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC group injected */ +#if defined(ADC3) +#define IS_LL_ADC_INJ_TRIG_SOURCE(__ADC_INSTANCE__, __INJ_TRIG_SOURCE__) \ + ((((__ADC_INSTANCE__) == ADC1) || ((__ADC_INSTANCE__) == ADC2)) \ + ? ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4) \ + ) \ + : \ + ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH2) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4_ADC3) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_CH4) \ + ) \ + ) +#else +#if defined (STM32F101xE) || defined (STM32F105xC) || defined (STM32F107xC) #define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH2) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH1) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH2) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_CH4) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_TRGO) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH2) \ - || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH3) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4) \ + ) +#else +#define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ + ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ ) - -#define IS_LL_ADC_INJ_TRIG_EXT_EDGE(__INJ_TRIG_EXT_EDGE__) \ - ( ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISING) \ - || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_FALLING) \ - || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISINGFALLING) \ - ) - +#endif +#endif #define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__) \ ( ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT) \ || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR) \ @@ -195,63 +232,17 @@ #if defined(ADC_MULTIMODE_SUPPORT) /* Check of parameters for configuration of ADC hierarchical scope: */ /* multimode. */ -#if defined(ADC3) #define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ ( ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL_FAST) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL_SLOW) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_SIMULT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIMULT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_INTERL) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_ALTERN) \ - ) -#else -#define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ - ( ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ - || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ - ) -#endif - -#define IS_LL_ADC_MULTI_DMA_TRANSFER(__MULTI_DMA_TRANSFER__) \ - ( ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_EACH_ADC) \ - || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_1) \ - || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_2) \ - || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_3) \ - || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_1) \ - || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_2) \ - || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_3) \ - ) - -#define IS_LL_ADC_MULTI_TWOSMP_DELAY(__MULTI_TWOSMP_DELAY__) \ - ( ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES) \ - || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTFAST_INJ_SIM) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTSLOW_INJ_SIM) \ ) #define IS_LL_ADC_MULTI_MASTER_SLAVE(__MULTI_MASTER_SLAVE__) \ @@ -291,12 +282,11 @@ ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) /* Check the parameters */ assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); - /* Force reset of ADC clock (core clock) */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC1); /* Release reset of ADC clock (core clock) */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC1); return SUCCESS; } @@ -322,28 +312,20 @@ ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonIni /* Check the parameters */ assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); - assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); - #if defined(ADC_MULTIMODE_SUPPORT) assert_param(IS_LL_ADC_MULTI_MODE(ADC_CommonInitStruct->Multimode)); - if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) - { - assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(ADC_CommonInitStruct->MultiDMATransfer)); - assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(ADC_CommonInitStruct->MultiTwoSamplingDelay)); - } #endif /* ADC_MULTIMODE_SUPPORT */ /* Note: Hardware constraint (refer to description of functions */ /* "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"): */ - /* On this STM32 series, setting of these features is conditioned to */ + /* On this STM32 serie, setting of these features is conditioned to */ /* ADC state: */ /* All ADC instances of the ADC common group must be disabled. */ - if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - common to several ADC */ /* (all ADC instances belonging to the same ADC common instance) */ - /* - Set ADC clock (conversion clock) */ /* - multimode (if several ADC instances available on the */ /* selected device) */ /* - Set ADC multimode configuration */ @@ -352,34 +334,18 @@ ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonIni #if defined(ADC_MULTIMODE_SUPPORT) if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) { - MODIFY_REG(ADCxy_COMMON->CCR, - ADC_CCR_ADCPRE - | ADC_CCR_MULTI - | ADC_CCR_DMA - | ADC_CCR_DDS - | ADC_CCR_DELAY - , - ADC_CommonInitStruct->CommonClock - | ADC_CommonInitStruct->Multimode - | ADC_CommonInitStruct->MultiDMATransfer - | ADC_CommonInitStruct->MultiTwoSamplingDelay + MODIFY_REG(ADCxy_COMMON->CR1, + ADC_CR1_DUALMOD, + ADC_CommonInitStruct->Multimode ); } else { - MODIFY_REG(ADCxy_COMMON->CCR, - ADC_CCR_ADCPRE - | ADC_CCR_MULTI - | ADC_CCR_DMA - | ADC_CCR_DDS - | ADC_CCR_DELAY - , - ADC_CommonInitStruct->CommonClock - | LL_ADC_MULTI_INDEPENDENT + MODIFY_REG(ADCxy_COMMON->CR1, + ADC_CR1_DUALMOD, + LL_ADC_MULTI_INDEPENDENT ); } -#else - LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); #endif } else @@ -403,13 +369,10 @@ void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) /* Set ADC_CommonInitStruct fields to default values */ /* Set fields of ADC common */ /* (all ADC instances belonging to the same ADC common instance) */ - ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; #if defined(ADC_MULTIMODE_SUPPORT) /* Set fields of ADC multimode */ ADC_CommonInitStruct->Multimode = LL_ADC_MULTI_INDEPENDENT; - ADC_CommonInitStruct->MultiDMATransfer = LL_ADC_MULTI_REG_DMA_EACH_ADC; - ADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES; #endif /* ADC_MULTIMODE_SUPPORT */ } @@ -431,7 +394,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) assert_param(IS_ADC_ALL_INSTANCE(ADCx)); /* Disable ADC instance if not already disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 1UL) + if(LL_ADC_IsEnabled(ADCx) == 1U) { /* Set ADC group regular trigger source to SW start to ensure to not */ /* have an external trigger event occurring during the conversion stop */ @@ -449,41 +412,51 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Check whether ADC state is compliant with expected state */ /* (hardware requirements of bits state to reset registers below) */ - if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0UL) + if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0U) { /* ========== Reset ADC registers ========== */ /* Reset register SR */ CLEAR_BIT(ADCx->SR, ( LL_ADC_FLAG_STRT | LL_ADC_FLAG_JSTRT - | LL_ADC_FLAG_EOCS - | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_EOS | LL_ADC_FLAG_JEOS | LL_ADC_FLAG_AWD1 ) ); /* Reset register CR1 */ + #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) + CLEAR_BIT(ADCx->CR1, - ( ADC_CR1_OVRIE | ADC_CR1_RES | ADC_CR1_AWDEN - | ADC_CR1_JAWDEN + ( ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_DUALMOD | ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN | ADC_CR1_JAUTO | ADC_CR1_AWDSGL | ADC_CR1_SCAN | ADC_CR1_JEOCIE | ADC_CR1_AWDIE | ADC_CR1_EOCIE | ADC_CR1_AWDCH ) ); + #else + + CLEAR_BIT(ADCx->CR1, + ( ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_DISCNUM + | ADC_CR1_JDISCEN | ADC_CR1_DISCEN | ADC_CR1_JAUTO + | ADC_CR1_AWDSGL | ADC_CR1_SCAN | ADC_CR1_JEOCIE + | ADC_CR1_AWDIE | ADC_CR1_EOCIE | ADC_CR1_AWDCH ) + ); + #endif /* Reset register CR2 */ CLEAR_BIT(ADCx->CR2, - ( ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL - | ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL - | ADC_CR2_ALIGN | ADC_CR2_EOCS - | ADC_CR2_DDS | ADC_CR2_DMA - | ADC_CR2_CONT | ADC_CR2_ADON ) + ( ADC_CR2_TSVREFE + | ADC_CR2_SWSTART | ADC_CR2_EXTTRIG | ADC_CR2_EXTSEL + | ADC_CR2_JSWSTART | ADC_CR2_JEXTTRIG | ADC_CR2_JEXTSEL + | ADC_CR2_ALIGN | ADC_CR2_DMA + | ADC_CR2_RSTCAL | ADC_CR2_CAL + | ADC_CR2_CONT | ADC_CR2_ADON ) ); /* Reset register SMPR1 */ CLEAR_BIT(ADCx->SMPR1, - ( ADC_SMPR1_SMP18 | ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16 + ( ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16 | ADC_SMPR1_SMP15 | ADC_SMPR1_SMP14 | ADC_SMPR1_SMP13 | ADC_SMPR1_SMP12 | ADC_SMPR1_SMP11 | ADC_SMPR1_SMP10) ); @@ -528,7 +501,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) ( ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4 | ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1) ); - + /* Reset register JSQR */ CLEAR_BIT(ADCx->JSQR, ( ADC_JSQR_JL @@ -542,8 +515,6 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Reset registers JDR1, JDR2, JDR3, JDR4 */ /* bits in access mode read only, no direct reset applicable */ - /* Reset register CCR */ - CLEAR_BIT(ADC->CCR, ADC_CCR_TSVREFE | ADC_CCR_ADCPRE); } return status; @@ -589,24 +560,20 @@ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); - assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); assert_param(IS_LL_ADC_SCAN_SELECTION(ADC_InitStruct->SequencersScanMode)); /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 0UL) + if(LL_ADC_IsEnabled(ADCx) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - ADC instance */ - /* - Set ADC data resolution */ /* - Set ADC conversion data alignment */ MODIFY_REG(ADCx->CR1, - ADC_CR1_RES - | ADC_CR1_SCAN + ADC_CR1_SCAN , - ADC_InitStruct->Resolution - | ADC_InitStruct->SequencersScanMode + ADC_InitStruct->SequencersScanMode ); MODIFY_REG(ADCx->CR2, @@ -634,7 +601,6 @@ void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) { /* Set ADC_InitStruct fields to default values */ /* Set fields of ADC instance */ - ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; /* Enable scan mode to have a generic behavior with ADC of other */ @@ -683,7 +649,11 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); +#if defined(ADC3) + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADCx, ADC_REG_InitStruct->TriggerSource)); +#else assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); +#endif assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { @@ -699,7 +669,7 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 0UL) + if(LL_ADC_IsEnabled(ADCx) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - ADC group regular */ @@ -709,7 +679,7 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* - Set ADC group regular continuous mode */ /* - Set ADC group regular conversion data transfer: no transfer or */ /* transfer by DMA, and DMA requests mode */ - /* Note: On this STM32 series, ADC trigger edge is set when starting */ + /* Note: On this STM32 serie, ADC trigger edge is set when starting */ /* ADC conversion. */ /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) @@ -718,7 +688,8 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I ADC_CR1_DISCEN | ADC_CR1_DISCNUM , - ADC_REG_InitStruct->SequencerDiscont + ADC_REG_InitStruct->SequencerLength + | ADC_REG_InitStruct->SequencerDiscont ); } else @@ -727,18 +698,17 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I ADC_CR1_DISCEN | ADC_CR1_DISCNUM , - LL_ADC_REG_SEQ_DISCONT_DISABLE + ADC_REG_InitStruct->SequencerLength + | LL_ADC_REG_SEQ_DISCONT_DISABLE ); } MODIFY_REG(ADCx->CR2, ADC_CR2_EXTSEL - | ADC_CR2_EXTEN | ADC_CR2_CONT | ADC_CR2_DMA - | ADC_CR2_DDS , - (ADC_REG_InitStruct->TriggerSource & ADC_CR2_EXTSEL) + ADC_REG_InitStruct->TriggerSource | ADC_REG_InitStruct->ContinuousMode | ADC_REG_InitStruct->DMATransfer ); @@ -770,7 +740,7 @@ void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) { /* Set ADC_REG_InitStruct fields to default values */ /* Set fields of ADC group regular */ - /* Note: On this STM32 series, ADC trigger edge is set when starting */ + /* Note: On this STM32 serie, ADC trigger edge is set when starting */ /* ADC conversion. */ /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; @@ -818,7 +788,11 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); +#if defined(ADC3) + assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADCx, ADC_INJ_InitStruct->TriggerSource)); +#else assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource)); +#endif assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength)); if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) { @@ -828,7 +802,7 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 0UL) + if(LL_ADC_IsEnabled(ADCx) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - ADC group injected */ @@ -837,7 +811,7 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I /* - Set ADC group injected sequencer discontinuous mode */ /* - Set ADC group injected conversion trigger: independent or */ /* from ADC group regular */ - /* Note: On this STM32 series, ADC trigger edge is set when starting */ + /* Note: On this STM32 serie, ADC trigger edge is set when starting */ /* ADC conversion. */ /* Refer to function @ref LL_ADC_INJ_StartConversionExtTrig(). */ if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) @@ -862,10 +836,9 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I } MODIFY_REG(ADCx->CR2, - ADC_CR2_JEXTSEL - | ADC_CR2_JEXTEN + ADC_CR2_JEXTSEL , - (ADC_INJ_InitStruct->TriggerSource & ADC_CR2_JEXTSEL) + ADC_INJ_InitStruct->TriggerSource ); /* Note: Hardware constraint (refer to description of this function): */ @@ -920,3 +893,4 @@ void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_crc.c similarity index 71% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_crc.c index 1138793..f993359 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_crc.c @@ -1,33 +1,34 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_crc.c + * @file stm32f1xx_ll_crc.c * @author MCD Application Team * @brief CRC LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_crc.h" -#include "stm32f4xx_ll_bus.h" +#include "stm32f1xx_ll_crc.h" +#include "stm32f1xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ +#endif/* USE_FULL_ASSERT */ -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -68,11 +69,12 @@ ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx) if (CRCx == CRC) { - /* Force CRC reset */ - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC); - /* Release CRC reset */ - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC); + /* Reset the CRC calculation unit */ + LL_CRC_ResetCRCCalculationUnit(CRCx); + + /* Reset IDR register */ + LL_CRC_Write_IDR(CRCx, 0x00U); } else { @@ -101,3 +103,6 @@ ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx) */ #endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dac.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dac.c similarity index 89% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dac.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dac.c index 0a5c2ff..b9f6cd5 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dac.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dac.c @@ -1,25 +1,26 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_dac.c + * @file stm32f1xx_ll_dac.c * @author MCD Application Team * @brief DAC LL module driver ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_dac.h" -#include "stm32f4xx_ll_bus.h" +#include "stm32f1xx_ll_dac.h" +#include "stm32f1xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" @@ -27,7 +28,7 @@ #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -45,21 +46,15 @@ /** @addtogroup DAC_LL_Private_Macros * @{ */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define IS_LL_DAC_CHANNEL(__DACX__, __DAC_CHANNEL__) \ - ( \ - ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1) \ - || ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_2) \ +#define IS_LL_DAC_CHANNEL(__DAC_CHANNEL__) \ + ( ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1) \ + || ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_2) \ ) -#else -#define IS_LL_DAC_CHANNEL(__DACX__, __DAC_CHANNEL__) \ - ( \ - ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1) \ - ) -#endif /* DAC_CHANNEL2_SUPPORT */ #define IS_LL_DAC_TRIGGER_SOURCE(__TRIGGER_SOURCE__) \ ( ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_SOFTWARE) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM3_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM15_TRGO) \ || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM2_TRGO) \ || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM4_TRGO) \ || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM5_TRGO) \ @@ -168,10 +163,7 @@ ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx) * @param DACx DAC instance * @param DAC_Channel This parameter can be one of the following values: * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. + * @arg @ref LL_DAC_CHANNEL_2 * @param DAC_InitStruct Pointer to a @ref LL_DAC_InitTypeDef structure * @retval An ErrorStatus enumeration value: * - SUCCESS: DAC registers are initialized @@ -183,7 +175,7 @@ ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, LL_DAC_InitType /* Check the parameters */ assert_param(IS_DAC_ALL_INSTANCE(DACx)); - assert_param(IS_LL_DAC_CHANNEL(DACx, DAC_Channel)); + assert_param(IS_LL_DAC_CHANNEL(DAC_Channel)); assert_param(IS_LL_DAC_TRIGGER_SOURCE(DAC_InitStruct->TriggerSource)); assert_param(IS_LL_DAC_OUTPUT_BUFFER(DAC_InitStruct->OutputBuffer)); assert_param(IS_LL_DAC_WAVE_AUTO_GENER_MODE(DAC_InitStruct->WaveAutoGeneration)); @@ -278,3 +270,4 @@ void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct) #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c new file mode 100644 index 0000000..5461480 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c @@ -0,0 +1,314 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_dma.h" +#include "stm32f1xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#if defined (DMA2) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ + (((INSTANCE) == DMA2) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#else +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7)))) +#endif +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1; + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Disable the selected DMAx_Channely */ + CLEAR_BIT(tmp->CCR, DMA_CCR_EN); + + /* Reset DMAx_Channely control register */ + LL_DMA_WriteReg(tmp, CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + LL_DMA_WriteReg(tmp, CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + LL_DMA_WriteReg(tmp, CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + LL_DMA_WriteReg(tmp, CMAR, 0U); + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_4) + { + /* Reset interrupt pending bits for DMAx Channel4 */ + LL_DMA_ClearFlag_GI4(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_5) + { + /* Reset interrupt pending bits for DMAx Channel5 */ + LL_DMA_ClearFlag_GI5(DMAx); + } + + else if (Channel == LL_DMA_CHANNEL_6) + { + /* Reset interrupt pending bits for DMAx Channel6 */ + LL_DMA_ClearFlag_GI6(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_7) + { + /* Reset interrupt pending bits for DMAx Channel7 */ + LL_DMA_ClearFlag_GI7(DMAx); + } + else + { + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = 0x00000000U; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c similarity index 91% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c index ce2f7b0..38a4190 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c @@ -1,31 +1,33 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_exti.c + * @file stm32f1xx_ll_exti.c * @author MCD Application Team * @brief EXTI LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ + #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_exti.h" +#include "stm32f1xx_ll_exti.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -88,8 +90,8 @@ uint32_t LL_EXTI_DeInit(void) LL_EXTI_WriteReg(FTSR, 0x00000000U); /* Software interrupt event register set to default reset values */ LL_EXTI_WriteReg(SWIER, 0x00000000U); - /* Pending register set to default reset values */ - LL_EXTI_WriteReg(PR, 0x00FFFFFFU); + /* Pending register clear */ + LL_EXTI_WriteReg(PR, 0x000FFFFFU); return SUCCESS; } @@ -210,3 +212,4 @@ void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct) #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c similarity index 81% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c index 8172871..03035ab 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_fsmc.c + * @file stm32f1xx_ll_fsmc.c * @author MCD Application Team * @brief FSMC Low Layer HAL module driver. * @@ -10,17 +10,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### FSMC peripheral features ##### @@ -51,12 +40,23 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ #if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) @@ -75,61 +75,49 @@ /* ----------------------- FSMC registers bit mask --------------------------- */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /* --- BCR Register ---*/ /* BCR register clear mask */ /* --- BTR Register ---*/ /* BTR register clear mask */ -#define BTR_CLEAR_MASK ((uint32_t)(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD |\ - FSMC_BTR1_DATAST | FSMC_BTR1_BUSTURN |\ - FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT |\ - FSMC_BTR1_ACCMOD)) +#define BTR_CLEAR_MASK ((uint32_t)(FSMC_BTRx_ADDSET | FSMC_BTRx_ADDHLD |\ + FSMC_BTRx_DATAST | FSMC_BTRx_BUSTURN |\ + FSMC_BTRx_CLKDIV | FSMC_BTRx_DATLAT |\ + FSMC_BTRx_ACCMOD)) /* --- BWTR Register ---*/ /* BWTR register clear mask */ -#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD |\ - FSMC_BWTR1_DATAST | FSMC_BWTR1_BUSTURN |\ - FSMC_BWTR1_ACCMOD)) -#endif /* FSMC_Bank1 */ -#if defined(FSMC_Bank2_3) - -#if defined (FSMC_PCR_PWAITEN) -/* --- PCR Register ---*/ -/* PCR register clear mask */ -#define PCR_CLEAR_MASK ((uint32_t)(FSMC_PCR_PWAITEN | FSMC_PCR_PBKEN | \ - FSMC_PCR_PTYP | FSMC_PCR_PWID | \ - FSMC_PCR_ECCEN | FSMC_PCR_TCLR | \ - FSMC_PCR_TAR | FSMC_PCR_ECCPS)) -/* --- PMEM Register ---*/ -/* PMEM register clear mask */ -#define PMEM_CLEAR_MASK ((uint32_t)(FSMC_PMEM_MEMSET2 | FSMC_PMEM_MEMWAIT2 |\ - FSMC_PMEM_MEMHOLD2 | FSMC_PMEM_MEMHIZ2)) - -/* --- PATT Register ---*/ -/* PATT register clear mask */ -#define PATT_CLEAR_MASK ((uint32_t)(FSMC_PATT_ATTSET2 | FSMC_PATT_ATTWAIT2 |\ - FSMC_PATT_ATTHOLD2 | FSMC_PATT_ATTHIZ2)) +#if defined(FSMC_BWTRx_BUSTURN) +#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD |\ + FSMC_BWTRx_DATAST | FSMC_BWTRx_BUSTURN |\ + FSMC_BWTRx_ACCMOD)) #else +#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD |\ + FSMC_BWTRx_DATAST | FSMC_BWTRx_ACCMOD |\ + FSMC_BWTRx_CLKDIV | FSMC_BWTRx_DATLAT)) +#endif /* FSMC_BWTRx_BUSTURN */ +#endif /* FSMC_BANK1 */ +#if defined(FSMC_BANK3) + /* --- PCR Register ---*/ /* PCR register clear mask */ -#define PCR_CLEAR_MASK ((uint32_t)(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | \ - FSMC_PCR2_PTYP | FSMC_PCR2_PWID | \ - FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \ - FSMC_PCR2_TAR | FSMC_PCR2_ECCPS)) +#define PCR_CLEAR_MASK ((uint32_t)(FSMC_PCRx_PWAITEN | FSMC_PCRx_PBKEN | \ + FSMC_PCRx_PTYP | FSMC_PCRx_PWID | \ + FSMC_PCRx_ECCEN | FSMC_PCRx_TCLR | \ + FSMC_PCRx_TAR | FSMC_PCRx_ECCPS)) /* --- PMEM Register ---*/ /* PMEM register clear mask */ -#define PMEM_CLEAR_MASK ((uint32_t)(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 |\ - FSMC_PMEM2_MEMHOLD2 | FSMC_PMEM2_MEMHIZ2)) +#define PMEM_CLEAR_MASK ((uint32_t)(FSMC_PMEMx_MEMSETx | FSMC_PMEMx_MEMWAITx |\ + FSMC_PMEMx_MEMHOLDx | FSMC_PMEMx_MEMHIZx)) /* --- PATT Register ---*/ /* PATT register clear mask */ -#define PATT_CLEAR_MASK ((uint32_t)(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 |\ - FSMC_PATT2_ATTHOLD2 | FSMC_PATT2_ATTHIZ2)) +#define PATT_CLEAR_MASK ((uint32_t)(FSMC_PATTx_ATTSETx | FSMC_PATTx_ATTWAITx |\ + FSMC_PATTx_ATTHOLDx | FSMC_PATTx_ATTHIZx)) -#endif /* FSMC_PCR_PWAITEN */ -#endif /* FSMC_Bank2_3 */ -#if defined(FSMC_Bank4) +#endif /* FSMC_BANK3 */ +#if defined(FSMC_BANK4) /* --- PCR Register ---*/ /* PCR register clear mask */ #define PCR4_CLEAR_MASK ((uint32_t)(FSMC_PCR4_PWAITEN | FSMC_PCR4_PBKEN | \ @@ -151,7 +139,7 @@ #define PIO4_CLEAR_MASK ((uint32_t)(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | \ FSMC_PIO4_IOHOLD4 | FSMC_PIO4_IOHIZ4)) -#endif /* FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ /** * @} @@ -166,7 +154,7 @@ * @{ */ -#if defined(FSMC_Bank1) +#if defined(FSMC_BANK1) /** @defgroup FSMC_LL_Exported_Functions_NORSRAM FSMC Low Layer NOR SRAM Exported Functions * @brief NORSRAM Controller functions @@ -231,21 +219,13 @@ HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode)); assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity)); -#if defined(FSMC_BCR1_WRAPMOD) assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode)); -#endif /* FSMC_BCR1_WRAPMOD */ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation)); assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal)); assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode)); assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait)); assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst)); -#if defined(FSMC_BCR1_CCLKEN) - assert_param(IS_FSMC_CONTINOUS_CLOCK(Init->ContinuousClock)); -#endif -#if defined(FSMC_BCR1_WFDIS) - assert_param(IS_FSMC_WRITE_FIFO(Init->WriteFifo)); -#endif /* FSMC_BCR1_WFDIS */ assert_param(IS_FSMC_PAGESIZE(Init->PageSize)); /* Disable NORSRAM Device */ @@ -274,59 +254,28 @@ HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, Init->AsynchronousWait | \ Init->WriteBurst); -#if defined(FSMC_BCR1_WRAPMOD) btcr_reg |= Init->WrapMode; -#endif /* FSMC_BCR1_WRAPMOD */ -#if defined(FSMC_BCR1_CCLKEN) - btcr_reg |= Init->ContinuousClock; -#endif /* FSMC_BCR1_CCLKEN */ -#if defined(FSMC_BCR1_WFDIS) - btcr_reg |= Init->WriteFifo; -#endif /* FSMC_BCR1_WFDIS */ btcr_reg |= Init->PageSize; - mask = (FSMC_BCR1_MBKEN | - FSMC_BCR1_MUXEN | - FSMC_BCR1_MTYP | - FSMC_BCR1_MWID | - FSMC_BCR1_FACCEN | - FSMC_BCR1_BURSTEN | - FSMC_BCR1_WAITPOL | - FSMC_BCR1_WAITCFG | - FSMC_BCR1_WREN | - FSMC_BCR1_WAITEN | - FSMC_BCR1_EXTMOD | - FSMC_BCR1_ASYNCWAIT | - FSMC_BCR1_CBURSTRW); + mask = (FSMC_BCRx_MBKEN | + FSMC_BCRx_MUXEN | + FSMC_BCRx_MTYP | + FSMC_BCRx_MWID | + FSMC_BCRx_FACCEN | + FSMC_BCRx_BURSTEN | + FSMC_BCRx_WAITPOL | + FSMC_BCRx_WAITCFG | + FSMC_BCRx_WREN | + FSMC_BCRx_WAITEN | + FSMC_BCRx_EXTMOD | + FSMC_BCRx_ASYNCWAIT | + FSMC_BCRx_CBURSTRW); -#if defined(FSMC_BCR1_WRAPMOD) - mask |= FSMC_BCR1_WRAPMOD; -#endif /* FSMC_BCR1_WRAPMOD */ -#if defined(FSMC_BCR1_CCLKEN) - mask |= FSMC_BCR1_CCLKEN; -#endif -#if defined(FSMC_BCR1_WFDIS) - mask |= FSMC_BCR1_WFDIS; -#endif /* FSMC_BCR1_WFDIS */ - mask |= FSMC_BCR1_CPSIZE; + mask |= FSMC_BCRx_WRAPMOD; + mask |= 0x00070000U; /* CPSIZE to be defined in CMSIS file */ MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg); -#if defined(FSMC_BCR1_CCLKEN) - /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ - if ((Init->ContinuousClock == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FSMC_NORSRAM_BANK1)) - { - MODIFY_REG(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN, Init->ContinuousClock); - } -#endif -#if defined(FSMC_BCR1_WFDIS) - - if (Init->NSBank != FSMC_NORSRAM_BANK1) - { - /* Configure Write FIFO mode when Write Fifo is enabled for bank2..4 */ - SET_BIT(Device->BTCR[FSMC_NORSRAM_BANK1], (uint32_t)(Init->WriteFifo)); - } -#endif /* FSMC_BCR1_WFDIS */ return HAL_OK; } @@ -378,9 +327,6 @@ HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) { -#if defined(FSMC_BCR1_CCLKEN) - uint32_t tmpr; -#endif /* Check the parameters */ assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); @@ -395,23 +341,13 @@ HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, /* Set FSMC_NORSRAM device timing parameters */ MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime | - ((Timing->AddressHoldTime) << FSMC_BTR1_ADDHLD_Pos) | - ((Timing->DataSetupTime) << FSMC_BTR1_DATAST_Pos) | - ((Timing->BusTurnAroundDuration) << FSMC_BTR1_BUSTURN_Pos) | - (((Timing->CLKDivision) - 1U) << FSMC_BTR1_CLKDIV_Pos) | - (((Timing->DataLatency) - 2U) << FSMC_BTR1_DATLAT_Pos) | + ((Timing->AddressHoldTime) << FSMC_BTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FSMC_BTRx_DATAST_Pos) | + ((Timing->BusTurnAroundDuration) << FSMC_BTRx_BUSTURN_Pos) | + (((Timing->CLKDivision) - 1U) << FSMC_BTRx_CLKDIV_Pos) | + (((Timing->DataLatency) - 2U) << FSMC_BTRx_DATLAT_Pos) | (Timing->AccessMode))); -#if defined(FSMC_BCR1_CCLKEN) - /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ - if (HAL_IS_BIT_SET(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN)) - { - tmpr = (uint32_t)(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FSMC_BTR1_CLKDIV_Pos)); - tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FSMC_BTR1_CLKDIV_Pos); - MODIFY_REG(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U], FSMC_BTR1_CLKDIV, tmpr); - } - -#endif return HAL_OK; } @@ -442,16 +378,30 @@ HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDe assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); +#if defined(FSMC_BWTRx_BUSTURN) assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); +#else + assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); +#endif /* FSMC_BWTRx_BUSTURN */ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); assert_param(IS_FSMC_NORSRAM_BANK(Bank)); /* Set NORSRAM device timing register for write configuration, if extended mode is used */ +#if defined(FSMC_BWTRx_BUSTURN) MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | - ((Timing->AddressHoldTime) << FSMC_BWTR1_ADDHLD_Pos) | - ((Timing->DataSetupTime) << FSMC_BWTR1_DATAST_Pos) | + ((Timing->AddressHoldTime) << FSMC_BWTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FSMC_BWTRx_DATAST_Pos) | Timing->AccessMode | - ((Timing->BusTurnAroundDuration) << FSMC_BWTR1_BUSTURN_Pos))); + ((Timing->BusTurnAroundDuration) << FSMC_BWTRx_BUSTURN_Pos))); +#else + MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | + ((Timing->AddressHoldTime) << FSMC_BWTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FSMC_BWTRx_DATAST_Pos) | + Timing->AccessMode | + (((Timing->CLKDivision) - 1U) << FSMC_BWTRx_CLKDIV_Pos) | + (((Timing->DataLatency) - 2U) << FSMC_BWTRx_DATLAT_Pos))); +#endif /* FSMC_BWTRx_BUSTURN */ } else { @@ -522,9 +472,9 @@ HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Devi /** * @} */ -#endif /* FSMC_Bank1 */ +#endif /* FSMC_BANK1 */ -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) /** @defgroup FSMC_LL_Exported_Functions_NAND FSMC Low Layer NAND Exported Functions * @brief NAND Controller functions @@ -596,8 +546,8 @@ HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDe Init->MemoryDataWidth | Init->EccComputation | Init->ECCPageSize | - ((Init->TCLRSetupTime) << FSMC_PCR2_TCLR_Pos) | - ((Init->TARSetupTime) << FSMC_PCR2_TAR_Pos))); + ((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos) | + ((Init->TARSetupTime) << FSMC_PCRx_TAR_Pos))); } else { @@ -607,8 +557,8 @@ HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDe Init->MemoryDataWidth | Init->EccComputation | Init->ECCPageSize | - ((Init->TCLRSetupTime) << FSMC_PCR2_TCLR_Pos) | - ((Init->TARSetupTime) << FSMC_PCR2_TAR_Pos))); + ((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos) | + ((Init->TARSetupTime) << FSMC_PCRx_TAR_Pos))); } return HAL_OK; @@ -638,17 +588,17 @@ HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, { /* NAND bank 2 registers configuration */ MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FSMC_PMEM2_MEMWAIT2_Pos) | - ((Timing->HoldSetupTime) << FSMC_PMEM2_MEMHOLD2_Pos) | - ((Timing->HiZSetupTime) << FSMC_PMEM2_MEMHIZ2_Pos))); + ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) | + ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) | + ((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos))); } else { /* NAND bank 3 registers configuration */ MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FSMC_PMEM2_MEMWAIT2_Pos) | - ((Timing->HoldSetupTime) << FSMC_PMEM2_MEMHOLD2_Pos) | - ((Timing->HiZSetupTime) << FSMC_PMEM2_MEMHIZ2_Pos))); + ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) | + ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) | + ((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos))); } return HAL_OK; @@ -678,17 +628,17 @@ HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device { /* NAND bank 2 registers configuration */ MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FSMC_PATT2_ATTWAIT2_Pos) | - ((Timing->HoldSetupTime) << FSMC_PATT2_ATTHOLD2_Pos) | - ((Timing->HiZSetupTime) << FSMC_PATT2_ATTHIZ2_Pos))); + ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) | + ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) | + ((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos))); } else { /* NAND bank 3 registers configuration */ MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FSMC_PATT2_ATTWAIT2_Pos) | - ((Timing->HoldSetupTime) << FSMC_PATT2_ATTHOLD2_Pos) | - ((Timing->HiZSetupTime) << FSMC_PATT2_ATTHIZ2_Pos))); + ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) | + ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) | + ((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos))); } return HAL_OK; @@ -766,11 +716,11 @@ HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank) /* Enable ECC feature */ if (Bank == FSMC_NAND_BANK2) { - SET_BIT(Device->PCR2, FSMC_PCR2_ECCEN); + SET_BIT(Device->PCR2, FSMC_PCRx_ECCEN); } else { - SET_BIT(Device->PCR3, FSMC_PCR2_ECCEN); + SET_BIT(Device->PCR3, FSMC_PCRx_ECCEN); } return HAL_OK; @@ -792,11 +742,11 @@ HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank /* Disable ECC feature */ if (Bank == FSMC_NAND_BANK2) { - CLEAR_BIT(Device->PCR2, FSMC_PCR2_ECCEN); + CLEAR_BIT(Device->PCR2, FSMC_PCRx_ECCEN); } else { - CLEAR_BIT(Device->PCR3, FSMC_PCR2_ECCEN); + CLEAR_BIT(Device->PCR3, FSMC_PCRx_ECCEN); } return HAL_OK; @@ -852,9 +802,9 @@ HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, /** * @} */ -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ -#if defined(FSMC_Bank4) +#if defined(FSMC_BANK4) /** @addtogroup FSMC_LL_PCCARD * @brief PCCARD Controller functions @@ -907,24 +857,24 @@ HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_Init { /* Check the parameters */ assert_param(IS_FSMC_PCCARD_DEVICE(Device)); -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ /* Set FSMC_PCCARD device control parameters */ MODIFY_REG(Device->PCR4, - (FSMC_PCR4_PTYP | - FSMC_PCR4_PWAITEN | - FSMC_PCR4_PWID | - FSMC_PCR4_TCLR | - FSMC_PCR4_TAR), + (FSMC_PCRx_PTYP | + FSMC_PCRx_PWAITEN | + FSMC_PCRx_PWID | + FSMC_PCRx_TCLR | + FSMC_PCRx_TAR), (FSMC_PCR_MEMORY_TYPE_PCCARD | Init->Waitfeature | FSMC_NAND_PCC_MEM_BUS_WIDTH_16 | - (Init->TCLRSetupTime << FSMC_PCR4_TCLR_Pos) | - (Init->TARSetupTime << FSMC_PCR4_TAR_Pos))); + (Init->TCLRSetupTime << FSMC_PCRx_TCLR_Pos) | + (Init->TARSetupTime << FSMC_PCRx_TAR_Pos))); return HAL_OK; } @@ -941,19 +891,19 @@ HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Devic { /* Check the parameters */ assert_param(IS_FSMC_PCCARD_DEVICE(Device)); -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ /* Set PCCARD timing parameters */ - MODIFY_REG(Device->PMEM4, PMEM4_CLEAR_MASK, + MODIFY_REG(Device->PMEM4, PMEM_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FSMC_PMEM4_MEMWAIT4_Pos) | - ((Timing->HoldSetupTime) << FSMC_PMEM4_MEMHOLD4_Pos) | - ((Timing->HiZSetupTime) << FSMC_PMEM4_MEMHIZ4_Pos))); + ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) | + ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) | + ((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos))); return HAL_OK; } @@ -970,19 +920,19 @@ HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *De { /* Check the parameters */ assert_param(IS_FSMC_PCCARD_DEVICE(Device)); -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ /* Set PCCARD timing parameters */ - MODIFY_REG(Device->PATT4, PATT4_CLEAR_MASK, + MODIFY_REG(Device->PATT4, PATT_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FSMC_PATT4_ATTWAIT4_Pos) | - ((Timing->HoldSetupTime) << FSMC_PATT4_ATTHOLD4_Pos) | - ((Timing->HiZSetupTime) << FSMC_PATT4_ATTHIZ4_Pos))); + ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) | + ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) | + ((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos))); return HAL_OK; } @@ -999,12 +949,12 @@ HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, { /* Check the parameters */ assert_param(IS_FSMC_PCCARD_DEVICE(Device)); -#if defined(FSMC_Bank2_3) +#if defined(FSMC_BANK3) assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); -#endif /* FSMC_Bank2_3 */ +#endif /* FSMC_BANK3 */ /* Set FSMC_PCCARD device timing parameters */ MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK, @@ -1042,7 +992,7 @@ HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device) /** * @} */ -#endif /* FSMC_Bank4 */ +#endif /* FSMC_BANK4 */ /** @@ -1060,3 +1010,5 @@ HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device) /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c new file mode 100644 index 0000000..22f2158 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c @@ -0,0 +1,258 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_gpio.c + * @author MCD Application Team + * @brief GPIO LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_gpio.h" +#include "stm32f1xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) + +/** @addtogroup GPIO_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Private_Macros + * @{ + */ + +#define IS_LL_GPIO_PIN(__VALUE__) ((((__VALUE__) & LL_GPIO_PIN_ALL)!= 0u) &&\ + (((__VALUE__) & (~LL_GPIO_PIN_ALL))== 0u)) + +#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_ANALOG) ||\ + ((__VALUE__) == LL_GPIO_MODE_FLOATING) ||\ + ((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_ALTERNATE)) + +#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH)) + +#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ + ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) + +#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_DOWN) ||\ + ((__VALUE__) == LL_GPIO_PULL_UP)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize GPIO registers (Registers restored to their default values). + * @param GPIOx GPIO Port + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are de-initialized + * - ERROR: Wrong GPIO Port + */ +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Force and Release reset on clock of GPIOx Port */ + if (GPIOx == GPIOA) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOA); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOA); + } + else if (GPIOx == GPIOB) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOB); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOB); + } + else if (GPIOx == GPIOC) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOC); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOC); + } + else if (GPIOx == GPIOD) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOD); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOD); + } +#if defined(GPIOE) + else if (GPIOx == GPIOE) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOE); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOE); + } +#endif +#if defined(GPIOF) + else if (GPIOx == GPIOF) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOF); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOF); + } +#endif +#if defined(GPIOG) + else if (GPIOx == GPIOG) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOG); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOG); + } +#endif + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. + * @param GPIOx GPIO Port + * @param GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure + * that contains the configuration information for the specified GPIO peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t pinmask; + uint32_t pinpos; + uint32_t currentpin; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); + + /* ------------------------- Configure the port pins ---------------- */ + /* Initialize pinpos on first pin set */ + + pinmask = ((GPIO_InitStruct->Pin) << GPIO_PIN_MASK_POS) >> GPIO_PIN_NB; + pinpos = POSITION_VAL(pinmask); + + /* Configure the port pins */ + while ((pinmask >> pinpos) != 0u) + { + /* skip if bit is not set */ + if ((pinmask & (1u << pinpos)) != 0u) + { + /* Get current io position */ + if (pinpos < GPIO_PIN_MASK_POS) + { + currentpin = (0x00000101uL << pinpos); + } + else + { + currentpin = ((0x00010001u << (pinpos - GPIO_PIN_MASK_POS)) | 0x04000000u); + } + + if (GPIO_InitStruct->Mode == LL_GPIO_MODE_INPUT) + { + /* Check The Pull parameter */ + assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); + + /* Pull-up Pull-down resistor configuration*/ + LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); + } + + /* Check Pin Mode parameters */ + assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); + + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); + + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check speed and Output mode parameters */ + assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Speed mode configuration */ + LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType); + } + } + pinpos++; + } + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. + * @param GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; + GPIO_InitStruct->Mode = LL_GPIO_MODE_FLOATING; + GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_OPENDRAIN; + GPIO_InitStruct->Pull = LL_GPIO_PULL_DOWN; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_i2c.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c similarity index 78% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_i2c.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c index d25e590..c6f752e 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_i2c.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c @@ -1,37 +1,38 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_i2c.c + * @file stm32f1xx_ll_i2c.c * @author MCD Application Team * @brief I2C LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_i2c.h" -#include "stm32f4xx_ll_bus.h" -#include "stm32f4xx_ll_rcc.h" +#include "stm32f1xx_ll_i2c.h" +#include "stm32f1xx_ll_bus.h" +#include "stm32f1xx_ll_rcc.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (I2C1) || defined (I2C2) || defined (I2C3) +#if defined (I2C1) || defined (I2C2) /** @defgroup I2C_LL I2C * @{ @@ -55,13 +56,6 @@ #define IS_LL_I2C_DUTY_CYCLE(__VALUE__) (((__VALUE__) == LL_I2C_DUTYCYCLE_2) || \ ((__VALUE__) == LL_I2C_DUTYCYCLE_16_9)) -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -#define IS_LL_I2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \ - ((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE)) - -#define IS_LL_I2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU) - -#endif #define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU) #define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \ @@ -106,6 +100,7 @@ uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx) /* Release reset of I2C clock */ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1); } +#if defined(I2C2) else if (I2Cx == I2C2) { /* Force reset of I2C clock */ @@ -115,16 +110,7 @@ uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx) LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2); } -#if defined(I2C3) - else if (I2Cx == I2C3) - { - /* Force reset of I2C clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C3); - - /* Release reset of I2C clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3); - } -#endif +#endif /* I2C2 */ else { status = ERROR; @@ -152,10 +138,6 @@ uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct) assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode)); assert_param(IS_LL_I2C_CLOCK_SPEED(I2C_InitStruct->ClockSpeed)); assert_param(IS_LL_I2C_DUTY_CYCLE(I2C_InitStruct->DutyCycle)); -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) - assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter)); - assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter)); -#endif assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1)); assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge)); assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize)); @@ -166,15 +148,6 @@ uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct) /* Retrieve Clock frequencies */ LL_RCC_GetSystemClocksFreq(&rcc_clocks); -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) - /*---------------------------- I2Cx FLTR Configuration ----------------------- - * Configure the analog and digital noise filters with parameters : - * - AnalogFilter: I2C_FLTR_ANFOFF bit - * - DigitalFilter: I2C_FLTR_DNF[3:0] bits - */ - LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter); - -#endif /*---------------------------- I2Cx SCL Clock Speed Configuration ------------ * Configure the SCL speed : * - ClockSpeed: I2C_CR2_FREQ[5:0], I2C_TRISE_TRISE[5:0], I2C_CCR_FS, @@ -220,10 +193,6 @@ void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C; I2C_InitStruct->ClockSpeed = 5000U; I2C_InitStruct->DutyCycle = LL_I2C_DUTYCYCLE_2; -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) - I2C_InitStruct->AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE; - I2C_InitStruct->DigitalFilter = 0U; -#endif I2C_InitStruct->OwnAddress1 = 0U; I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK; I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT; @@ -241,7 +210,7 @@ void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) * @} */ -#endif /* I2C1 || I2C2 || I2C3 */ +#endif /* I2C1 || I2C2 */ /** * @} @@ -249,3 +218,4 @@ void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_pwr.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c similarity index 74% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_pwr.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c index 0c6f61e..7b1da20 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_pwr.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c @@ -1,26 +1,29 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_pwr.c + * @file stm32f1xx_ll_pwr.c * @author MCD Application Team * @brief PWR LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ + #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_pwr.h" -#include "stm32f4xx_ll_bus.h" +#include "stm32f1xx_ll_pwr.h" +#include "stm32f1xx_ll_bus.h" -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ @@ -79,3 +82,5 @@ ErrorStatus LL_PWR_DeInit(void) */ #endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c new file mode 100644 index 0000000..2f63c33 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c @@ -0,0 +1,474 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ +#if defined(RCC_PLLI2S_SUPPORT) +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S2_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2S3_CLKSOURCE)) +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(USB) || defined(USB_OTG_FS) +#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) +#endif /* USB */ + +#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +uint32_t RCC_GetSystemClockFreq(void); +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_PLL_GetFreqDomain_SYS(void); +#if defined(RCC_PLLI2S_SUPPORT) +uint32_t RCC_PLLI2S_GetFreqDomain_I2S(void); +#endif /* RCC_PLLI2S_SUPPORT */ +#if defined(RCC_PLL2_SUPPORT) +uint32_t RCC_PLL2_GetFreqClockFreq(void); +#endif /* RCC_PLL2_SUPPORT */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE PLL, PLL2 & PLL3 are OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS, MCO OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + /* Set HSION bit */ + LL_RCC_HSI_Enable(); + + /* Wait for HSI READY bit */ + while (LL_RCC_HSI_IsReady() != 1U) + {} + + /* Configure HSI as system clock source */ + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI); + + /* Wait till clock switch is ready */ + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI) + {} + + /* Reset PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); + + /* Wait for PLL READY bit to be reset */ + while (LL_RCC_PLL_IsReady() != 0U) + {} + + /* Reset CFGR register */ + LL_RCC_WriteReg(CFGR, 0x00000000U); + + /* Reset HSEON, HSEBYP & CSSON bits */ + CLEAR_BIT(RCC->CR, (RCC_CR_CSSON | RCC_CR_HSEON | RCC_CR_HSEBYP)); + +#if defined(RCC_CR_PLL2ON) + /* Reset PLL2ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); +#endif /* RCC_CR_PLL2ON */ + +#if defined(RCC_CR_PLL3ON) + /* Reset PLL3ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); +#endif /* RCC_CR_PLL3ON */ + + /* Set HSITRIM bits to the reset value */ + LL_RCC_HSI_SetCalibTrimming(0x10U); + +#if defined(RCC_CFGR2_PREDIV1) + /* Reset CFGR2 register */ + LL_RCC_WriteReg(CFGR2, 0x00000000U); +#endif /* RCC_CFGR2_PREDIV1 */ + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIR, 0x00000000U); + + /* Clear reset flags */ + LL_RCC_ClearResetFlags(); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks + * and different peripheral clocks available on the device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * @note (**) HSI_VALUE is a defined constant but the real value may vary + * depending on the variations in voltage and temperature. + * @note (***) HSE_VALUE is a defined constant, user has to ensure that + * HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks + * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); + + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +#if defined(RCC_CFGR2_I2S2SRC) +/** + * @brief Return I2Sx clock frequency + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S2_CLKSOURCE + * @arg @ref LL_RCC_I2S3_CLKSOURCE + * @retval I2S clock frequency (in Hz) + */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) +{ + uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); + + /* I2S1CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S2_CLKSOURCE_SYSCLK: /*!< System clock selected as I2S clock source */ + case LL_RCC_I2S3_CLKSOURCE_SYSCLK: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2S2_CLKSOURCE_PLLI2S_VCO: /*!< PLLI2S oscillator clock selected as I2S clock source */ + case LL_RCC_I2S3_CLKSOURCE_PLLI2S_VCO: + default: + i2s_frequency = RCC_PLLI2S_GetFreqDomain_I2S() * 2U; + break; + } + + return i2s_frequency; +} +#endif /* RCC_CFGR2_I2S2SRC */ + +#if defined(USB) || defined(USB_OTG_FS) +/** + * @brief Return USBx clock frequency + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval USB clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI), HSE or PLL is not ready + */ +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) +{ + uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource)); + + /* USBCLK clock frequency */ + switch (LL_RCC_GetUSBClockSource(USBxSource)) + { +#if defined(RCC_CFGR_USBPRE) + case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ + if (LL_RCC_PLL_IsReady()) + { + usb_frequency = RCC_PLL_GetFreqDomain_SYS(); + } + break; + + case LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5: /* PLL clock divided by 1.5 used as USB clock source */ + default: + if (LL_RCC_PLL_IsReady()) + { + usb_frequency = (RCC_PLL_GetFreqDomain_SYS() * 3U) / 2U; + } + break; +#endif /* RCC_CFGR_USBPRE */ +#if defined(RCC_CFGR_OTGFSPRE) + /* USBCLK = PLLVCO/2 + = (2 x PLLCLK) / 2 + = PLLCLK */ + case LL_RCC_USB_CLKSOURCE_PLL_DIV_2: /* PLL clock used as USB clock source */ + if (LL_RCC_PLL_IsReady()) + { + usb_frequency = RCC_PLL_GetFreqDomain_SYS(); + } + break; + + /* USBCLK = PLLVCO/3 + = (2 x PLLCLK) / 3 */ + case LL_RCC_USB_CLKSOURCE_PLL_DIV_3: /* PLL clock divided by 3 used as USB clock source */ + default: + if (LL_RCC_PLL_IsReady()) + { + usb_frequency = (RCC_PLL_GetFreqDomain_SYS() * 2U) / 3U; + } + break; +#endif /* RCC_CFGR_OTGFSPRE */ + } + + return usb_frequency; +} +#endif /* USB */ + +/** + * @brief Return ADCx clock frequency + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval ADC clock frequency (in Hz) + */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) +{ + uint32_t adc_prescaler = 0U; + uint32_t adc_frequency = 0U; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource)); + + /* Get ADC prescaler */ + adc_prescaler = LL_RCC_GetADCClockSource(ADCxSource); + + /* ADC frequency = PCLK2 frequency / ADC prescaler (2, 4, 6 or 8) */ + adc_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())) + / (((adc_prescaler >> POSITION_VAL(ADCxSource)) + 1U) * 2U); + + return adc_frequency; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency = 0U; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + frequency = HSI_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + frequency = HSE_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ + frequency = RCC_PLL_GetFreqDomain_SYS(); + break; + + default: + frequency = HSI_VALUE; + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} + +/** + * @brief Return PCLK2 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK2 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK2 clock frequency */ + return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler()); +} + +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_SYS(void) +{ + uint32_t pllinputfreq = 0U, pllsource = 0U; + + /* PLL_VCO = (HSE_VALUE, HSI_VALUE or PLL2 / PLL Predivider) * PLL Multiplicator */ + + /* Get PLL source */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI_DIV_2: /* HSI used as PLL clock source */ + pllinputfreq = HSI_VALUE / 2U; + break; + + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE / (LL_RCC_PLL_GetPrediv() + 1U); + break; + +#if defined(RCC_PLL2_SUPPORT) + case LL_RCC_PLLSOURCE_PLL2: /* PLL2 used as PLL clock source */ + pllinputfreq = RCC_PLL2_GetFreqClockFreq() / (LL_RCC_PLL_GetPrediv() + 1U); + break; +#endif /* RCC_PLL2_SUPPORT */ + + default: + pllinputfreq = HSI_VALUE / 2U; + break; + } + return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetMultiplicator()); +} + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL2_GetFreqClockFreq(void) +{ + return __LL_RCC_CALC_PLL2CLK_FREQ(HSE_VALUE, LL_RCC_PLL2_GetMultiplicator(), LL_RCC_HSE_GetPrediv2()); +} +#endif /* RCC_PLL2_SUPPORT */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLLI2S_GetFreqDomain_I2S(void) +{ + return __LL_RCC_CALC_PLLI2SCLK_FREQ(HSE_VALUE, LL_RCC_PLLI2S_GetMultiplicator(), LL_RCC_HSE_GetPrediv2()); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rtc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rtc.c new file mode 100644 index 0000000..24c3c13 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rtc.c @@ -0,0 +1,544 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_rtc.c + * @author MCD Application Team + * @brief RTC LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_rtc.h" +#include "stm32f1xx_ll_cortex.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @addtogroup RTC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Constants + * @{ + */ +/* Default values used for prescaler */ +#define RTC_ASYNCH_PRESC_DEFAULT 0x00007FFFU + +/* Values used for timeout */ +#define RTC_INITMODE_TIMEOUT 1000U /* 1s when tick set to 1ms */ +#define RTC_SYNCHRO_TIMEOUT 1000U /* 1s when tick set to 1ms */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Macros + * @{ + */ + +#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0xFFFFFU) + +#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \ + || ((__VALUE__) == LL_RTC_FORMAT_BCD)) + +#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U) +#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U) +#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U) +#define IS_LL_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_NONE) || \ + ((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_RTCCLOCK) || \ + ((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_ALARM) || \ + ((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_SECOND)) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes the RTC registers to their default reset values. + * @note This function doesn't reset the RTC Clock source and RTC Backup Data + * registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are de-initialized + * - ERROR: RTC registers are not de-initialized + */ +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx) +{ + ErrorStatus status = ERROR; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + LL_RTC_WriteReg(RTCx, CNTL, 0x0000); + LL_RTC_WriteReg(RTCx, CNTH, 0x0000); + LL_RTC_WriteReg(RTCx, PRLH, 0x0000); + LL_RTC_WriteReg(RTCx, PRLL, 0x8000); + LL_RTC_WriteReg(RTCx, CRH, 0x0000); + LL_RTC_WriteReg(RTCx, CRL, 0x0020); + + /* Reset Tamper and alternate functions configuration register */ + LL_RTC_WriteReg(BKP, RTCCR, 0x00000000U); + LL_RTC_WriteReg(BKP, CR, 0x00000000U); + LL_RTC_WriteReg(BKP, CSR, 0x00000000U); + + /* Exit Initialization Mode */ + if (LL_RTC_ExitInitMode(RTCx) != ERROR) + { + /* Wait till the RTC RSF flag is set */ + status = LL_RTC_WaitForSynchro(RTCx); + + /* Clear RSF Flag */ + LL_RTC_ClearFlag_RS(RTCx); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + } + } + else + { + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + } + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTCx RTC Instance + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @note the user should call LL_RTC_StructInit() or the structure of Prescaler + * need to be initialized before RTC init() + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler)); + assert_param(IS_LL_RTC_CALIB_OUTPUT(RTC_InitStruct->OutPutSource)); + /* Waiting for synchro */ + if (LL_RTC_WaitForSynchro(RTCx) != ERROR) + { + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Clear Flag Bits */ + LL_RTC_ClearFlag_ALR(RTCx); + LL_RTC_ClearFlag_OW(RTCx); + LL_RTC_ClearFlag_SEC(RTCx); + + if (RTC_InitStruct->OutPutSource != LL_RTC_CALIB_OUTPUT_NONE) + { + /* Disable the selected Tamper Pin */ + LL_RTC_TAMPER_Disable(BKP); + } + /* Set the signal which will be routed to RTC Tamper Pin */ + LL_RTC_SetOutputSource(BKP, RTC_InitStruct->OutPutSource); + + /* Configure Synchronous and Asynchronous prescaler factor */ + LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler); + + /* Exit Initialization Mode */ + LL_RTC_ExitInitMode(RTCx); + + status = SUCCESS; + } + } + return status; +} + +/** + * @brief Set each @ref LL_RTC_InitTypeDef field to default value. + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct) +{ + /* Set RTC_InitStruct fields to default values */ + RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT; + RTC_InitStruct->OutPutSource = LL_RTC_CALIB_OUTPUT_NONE; +} + +/** + * @brief Set the RTC current time. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @note The user should call LL_RTC_TIME_StructInit() or the structure + * of time need to be initialized before time init() + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + ErrorStatus status = ERROR; + uint32_t counter_time = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours)); + assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds)); + } + else + { + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))); + } + + /* Enter Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + counter_time = (uint32_t)(((uint32_t)RTC_TimeStruct->Hours * 3600U) + \ + ((uint32_t)RTC_TimeStruct->Minutes * 60U) + \ + ((uint32_t)RTC_TimeStruct->Seconds)); + LL_RTC_TIME_Set(RTCx, counter_time); + } + else + { + counter_time = (((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours)) * 3600U) + \ + ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes)) * 60U) + \ + ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds)))); + LL_RTC_TIME_Set(RTCx, counter_time); + } + status = SUCCESS; + } + /* Exit Initialization mode */ + LL_RTC_ExitInitMode(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec). + * @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->Hours = 0U; + RTC_TimeStruct->Minutes = 0U; + RTC_TimeStruct->Seconds = 0U; +} + +/** + * @brief Set the RTC Alarm. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @note the user should call LL_RTC_ALARM_StructInit() or the structure + * of Alarm need to be initialized before Alarm init() + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARM registers are configured + * - ERROR: ALARM registers are not configured + */ +ErrorStatus LL_RTC_ALARM_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + ErrorStatus status = ERROR; + uint32_t counter_alarm = 0U; + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + } + else + { + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + } + + /* Enter Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + counter_alarm = (uint32_t)(((uint32_t)RTC_AlarmStruct->AlarmTime.Hours * 3600U) + \ + ((uint32_t)RTC_AlarmStruct->AlarmTime.Minutes * 60U) + \ + ((uint32_t)RTC_AlarmStruct->AlarmTime.Seconds)); + LL_RTC_ALARM_Set(RTCx, counter_alarm); + } + else + { + counter_alarm = (((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours)) * 3600U) + \ + ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes)) * 60U) + \ + ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds)))); + LL_RTC_ALARM_Set(RTCx, counter_alarm); + } + status = SUCCESS; + } + /* Exit Initialization mode */ + LL_RTC_ExitInitMode(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARM field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALARM_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; +} + +/** + * @brief Enters the RTC Initialization mode. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + tmp = LL_RTC_IsActiveFlag_RTOF(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout --; + } + tmp = LL_RTC_IsActiveFlag_RTOF(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC exited from in Init mode + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable initialization mode */ + LL_RTC_EnableWriteProtection(RTCx); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + tmp = LL_RTC_IsActiveFlag_RTOF(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout --; + } + tmp = LL_RTC_IsActiveFlag_RTOF(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + return status; +} + +/** + * @brief Set the Time Counter + * @param RTCx RTC Instance + * @param TimeCounter this value can be from 0 to 0xFFFFFFFF + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Counter register configured + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_TIME_SetCounter(RTC_TypeDef *RTCx, uint32_t TimeCounter) +{ + ErrorStatus status = ERROR; + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Enter Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + LL_RTC_TIME_Set(RTCx, TimeCounter); + status = SUCCESS; + } + /* Exit Initialization mode */ + LL_RTC_ExitInitMode(RTCx); + + return status; +} + +/** + * @brief Set Alarm Counter. + * @param RTCx RTC Instance + * @param AlarmCounter this value can be from 0 to 0xFFFFFFFF + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC exited from in Init mode + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_ALARM_SetCounter(RTC_TypeDef *RTCx, uint32_t AlarmCounter) +{ + ErrorStatus status = ERROR; + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Enter Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + LL_RTC_ALARM_Set(RTCx, AlarmCounter); + status = SUCCESS; + } + /* Exit Initialization mode */ + LL_RTC_ExitInitMode(RTCx); + + return status; +} + +/** + * @brief Waits until the RTC registers are synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Clear RSF flag */ + LL_RTC_ClearFlag_RS(RTCx); + + /* Wait the registers to be synchronised */ + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 0U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_sdmmc.c similarity index 95% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_sdmmc.c index ab48303..f47a1ae 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_sdmmc.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_sdmmc.c + * @file stm32f1xx_ll_sdmmc.c * @author MCD Application Team * @brief SDMMC Low Layer HAL module driver. * @@ -11,17 +11,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### SDMMC peripheral features ##### @@ -153,14 +142,25 @@ @endverbatim ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" #if defined(SDIO) -/** @addtogroup STM32F4xx_HAL_Driver +/** @addtogroup STM32F1xx_HAL_Driver * @{ */ @@ -177,6 +177,11 @@ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout); +static uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA); /* Exported functions --------------------------------------------------------*/ @@ -306,6 +311,10 @@ HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx) /* Set power state to ON */ SDIOx->POWER = SDIO_POWER_PWRCTRL; + /* 1ms: required power up waiting time before starting the SD initialization + sequence */ + HAL_Delay(2); + return HAL_OK; } @@ -1017,31 +1026,6 @@ uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA) return errorstate; } -/** - * @brief Send the Set Relative Address command to MMC card (not SD card). - * @param SDIOx Pointer to SDIO register base - * @param RCA Card RCA - * @retval HAL status - */ -uint32_t SDMMC_CmdSetRelAddMmc(SDIO_TypeDef *SDIOx, uint16_t RCA) -{ - SDIO_CmdInitTypeDef sdmmc_cmdinit; - uint32_t errorstate; - - /* Send CMD3 SD_CMD_SET_REL_ADDR */ - sdmmc_cmdinit.Argument = ((uint32_t)RCA << 16U); - sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; - sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; - sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; - sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; - (void)SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); - - /* Check for error conditions */ - errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SET_REL_ADDR, SDIO_CMDTIMEOUT); - - return errorstate; -} - /** * @brief Send the Status command and check the response. * @param SDIOx: Pointer to SDIO register base @@ -1140,55 +1124,48 @@ uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument) return errorstate; } -/** - * @brief Send the Send EXT_CSD command and check the response. - * @param SDIOx Pointer to SDMMC register base - * @param Argument Command Argument - * @retval HAL status - */ -uint32_t SDMMC_CmdSendEXTCSD(SDIO_TypeDef *SDIOx, uint32_t Argument) -{ - SDIO_CmdInitTypeDef sdmmc_cmdinit; - uint32_t errorstate; - - /* Send CMD9 SEND_CSD */ - sdmmc_cmdinit.Argument = Argument; - sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; - sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; - sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; - sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; - (void)SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); - - /* Check for error conditions */ - errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_HS_SEND_EXT_CSD,SDIO_CMDTIMEOUT); - - return errorstate; -} - /** * @} */ -/** @defgroup HAL_SDMMC_LL_Group5 Responses management functions - * @brief Responses functions - * -@verbatim - =============================================================================== - ##### Responses management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the needed responses. - -@endverbatim +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions * @{ */ + +/** + * @brief Checks for error conditions for CMD0. + * @param hsd: SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDIO_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CMDSENT)); + + /* Clear all the static flags */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_CMD_FLAGS); + + return SDMMC_ERROR_NONE; +} + /** * @brief Checks for error conditions for R1 response. - * @param SDIOx Pointer to SDMMC register base + * @param hsd: SD handle * @param SD_CMD: The sent command index * @retval SD Card error state */ -uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout) +static uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout) { uint32_t response_r1; uint32_t sta_reg; @@ -1320,10 +1297,10 @@ uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout /** * @brief Checks for error conditions for R2 (CID or CSD) response. - * @param SDIOx Pointer to SDMMC register base + * @param hsd: SD handle * @retval SD Card error state */ -uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx) +static uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx) { uint32_t sta_reg; /* 8 is the number of required instructions cycles for the below loop statement. @@ -1364,10 +1341,10 @@ uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx) /** * @brief Checks for error conditions for R3 (OCR) response. - * @param SDIOx Pointer to SDMMC register base + * @param hsd: SD handle * @retval SD Card error state */ -uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx) +static uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx) { uint32_t sta_reg; /* 8 is the number of required instructions cycles for the below loop statement. @@ -1401,13 +1378,13 @@ uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx) /** * @brief Checks for error conditions for R6 (RCA) response. - * @param SDIOx Pointer to SDMMC register base + * @param hsd: SD handle * @param SD_CMD: The sent command index * @param pRCA: Pointer to the variable that will contain the SD card relative * address RCA * @retval SD Card error state */ -uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA) +static uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA) { uint32_t response_r1; uint32_t sta_reg; @@ -1477,10 +1454,10 @@ uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA) /** * @brief Checks for error conditions for R7 response. - * @param SDIOx Pointer to SDMMC register base + * @param hsd: SD handle * @retval SD Card error state */ -uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx) +static uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx) { uint32_t sta_reg; /* 8 is the number of required instructions cycles for the below loop statement. @@ -1527,38 +1504,28 @@ uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx) } /** - * @} + * @brief Send the Send EXT_CSD command and check the response. + * @param SDIOx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status */ - -/* Private function ----------------------------------------------------------*/ -/** @addtogroup SD_Private_Functions - * @{ - */ - -/** - * @brief Checks for error conditions for CMD0. - * @param SDIOx Pointer to SDMMC register base - * @retval SD Card error state - */ -static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx) +uint32_t SDMMC_CmdSendEXTCSD(SDIO_TypeDef *SDIOx, uint32_t Argument) { - /* 8 is the number of required instructions cycles for the below loop statement. - The SDIO_CMDTIMEOUT is expressed in ms */ - uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); - - do - { - if (count-- == 0U) - { - return SDMMC_ERROR_TIMEOUT; - } - - }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CMDSENT)); - - /* Clear all the static flags */ - __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_CMD_FLAGS); - - return SDMMC_ERROR_NONE; + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD9 SEND_CSD */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + (void)SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_HS_SEND_EXT_CSD,SDIO_CMDTIMEOUT); + + return errorstate; } @@ -1576,3 +1543,5 @@ static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx) */ #endif /* SDIO */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c similarity index 81% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c index 02a0740..6a971a1 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c @@ -1,38 +1,39 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_spi.c + * @file stm32f1xx_ll_spi.c * @author MCD Application Team * @brief SPI LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_spi.h" -#include "stm32f4xx_ll_bus.h" -#include "stm32f4xx_ll_rcc.h" +#include "stm32f1xx_ll_spi.h" +#include "stm32f1xx_ll_bus.h" +#include "stm32f1xx_ll_rcc.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ +#endif -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (SPI1) || defined (SPI2) || defined (SPI3) || defined (SPI4) || defined (SPI5) || defined(SPI6) +#if defined (SPI1) || defined (SPI2) || defined (SPI3) /** @addtogroup SPI_LL * @{ @@ -162,42 +163,6 @@ ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx) status = SUCCESS; } #endif /* SPI3 */ -#if defined(SPI4) - if (SPIx == SPI4) - { - /* Force reset of SPI clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI4); - - /* Release reset of SPI clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI4); - - status = SUCCESS; - } -#endif /* SPI4 */ -#if defined(SPI5) - if (SPIx == SPI5) - { - /* Force reset of SPI clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI5); - - /* Release reset of SPI clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI5); - - status = SUCCESS; - } -#endif /* SPI5 */ -#if defined(SPI6) - if (SPIx == SPI6) - { - /* Force reset of SPI clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI6); - - /* Release reset of SPI clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI6); - - status = SUCCESS; - } -#endif /* SPI6 */ return status; } @@ -267,8 +232,10 @@ ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) status = SUCCESS; } +#if defined (SPI_I2S_SUPPORT) /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2S_SUPPORT */ return status; } @@ -305,6 +272,7 @@ void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) * @} */ +#if defined(SPI_I2S_SUPPORT) /** @addtogroup I2S_LL * @{ */ @@ -402,6 +370,7 @@ ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) uint32_t i2sodd = 0U; uint32_t packetlength = 1U; uint32_t tmp; + LL_RCC_ClocksTypeDef rcc_clocks; uint32_t sourceclock; ErrorStatus status = ERROR; @@ -451,10 +420,11 @@ ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) packetlength = 2U; } - /* If an external I2S clock has to be used, the specific define should be set - in the project configuration or in the stm32f4xx_ll_rcc.h file */ - /* Get the I2S source clock value */ - sourceclock = LL_RCC_GetI2SClockFreq(LL_RCC_I2S1_CLKSOURCE); + /* I2S Clock source is System clock: Get System Clock frequency */ + LL_RCC_GetSystemClocksFreq(&rcc_clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = rcc_clocks.SYSCLK_Frequency; /* Compute the Real divider depending on the MCLK output state with a floating point */ if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) @@ -536,72 +506,6 @@ void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_ MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) -/** - * @brief Configures the full duplex mode for the I2Sx peripheral using its extension - * I2Sxext according to the specified parameters in the I2S_InitStruct. - * @note The structure pointed by I2S_InitStruct parameter should be the same - * used for the master I2S peripheral. In this case, if the master is - * configured as transmitter, the slave will be receiver and vice versa. - * Or you can force a different mode by modifying the field I2S_Mode to the - * value I2S_SlaveRx or I2S_SlaveTx independently of the master configuration. - * @param I2Sxext SPI Instance - * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: I2Sxext registers are Initialized - * - ERROR: I2Sxext registers are not Initialized - */ -ErrorStatus LL_I2S_InitFullDuplex(SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S_InitStruct) -{ - uint32_t mode = 0U; - ErrorStatus status = ERROR; - - /* Check the I2S parameters */ - assert_param(IS_I2S_EXT_ALL_INSTANCE(I2Sxext)); - assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); - assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); - assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); - assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); - - if (LL_I2S_IsEnabled(I2Sxext) == 0x00000000U) - { - /*---------------------------- SPIx I2SCFGR Configuration -------------------- - * Configure SPIx I2SCFGR with parameters: - * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit - * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits - * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits - * - ClockPolarity: SPI_I2SCFGR_CKPOL bit - */ - - /* Reset I2SPR registers */ - WRITE_REG(I2Sxext->I2SPR, I2S_I2SPR_CLEAR_MASK); - - /* Get the mode to be configured for the extended I2S */ - if ((I2S_InitStruct->Mode == LL_I2S_MODE_MASTER_TX) || (I2S_InitStruct->Mode == LL_I2S_MODE_SLAVE_TX)) - { - mode = LL_I2S_MODE_SLAVE_RX; - } - else - { - if ((I2S_InitStruct->Mode == LL_I2S_MODE_MASTER_RX) || (I2S_InitStruct->Mode == LL_I2S_MODE_SLAVE_RX)) - { - mode = LL_I2S_MODE_SLAVE_TX; - } - } - - /* Write to SPIx I2SCFGR */ - MODIFY_REG(I2Sxext->I2SCFGR, - I2S_I2SCFGR_CLEAR_MASK, - I2S_InitStruct->Standard | - I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | - SPI_I2SCFGR_I2SMOD | mode); - - status = SUCCESS; - } - return status; -} -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - /** * @} */ @@ -613,8 +517,9 @@ ErrorStatus LL_I2S_InitFullDuplex(SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S /** * @} */ +#endif /* SPI_I2S_SUPPORT */ -#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) || defined (SPI4) || defined (SPI5) || defined(SPI6) */ +#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */ /** * @} @@ -622,3 +527,4 @@ ErrorStatus LL_I2S_InitFullDuplex(SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_tim.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c similarity index 96% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_tim.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c index b272b62..07b05ee 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_tim.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c @@ -1,25 +1,26 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_tim.c + * @file stm32f1xx_ll_tim.c * @author MCD Application Team * @brief TIM LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_tim.h" -#include "stm32f4xx_ll_bus.h" +#include "stm32f1xx_ll_tim.h" +#include "stm32f1xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" @@ -27,11 +28,11 @@ #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) /** @addtogroup TIM_LL * @{ @@ -99,8 +100,7 @@ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) #define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ - || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ - || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) #define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ @@ -172,102 +172,123 @@ ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx) /* Check the parameters */ assert_param(IS_TIM_INSTANCE(TIMx)); - if (TIMx == TIM1) - { - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1); - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1); - } -#if defined(TIM2) - else if (TIMx == TIM2) + if (TIMx == TIM2) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); } -#endif /* TIM2 */ +#if defined(TIM1) + else if (TIMx == TIM1) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1); + } +#endif #if defined(TIM3) else if (TIMx == TIM3) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); } -#endif /* TIM3 */ +#endif #if defined(TIM4) else if (TIMx == TIM4) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4); } -#endif /* TIM4 */ +#endif #if defined(TIM5) else if (TIMx == TIM5) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM5); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM5); } -#endif /* TIM5 */ +#endif #if defined(TIM6) else if (TIMx == TIM6) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); } -#endif /* TIM6 */ +#endif #if defined (TIM7) else if (TIMx == TIM7) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); } -#endif /* TIM7 */ +#endif #if defined(TIM8) else if (TIMx == TIM8) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM8); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM8); } -#endif /* TIM8 */ +#endif #if defined(TIM9) else if (TIMx == TIM9) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM9); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM9); } -#endif /* TIM9 */ +#endif #if defined(TIM10) else if (TIMx == TIM10) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM10); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM10); } -#endif /* TIM10 */ +#endif #if defined(TIM11) else if (TIMx == TIM11) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM11); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM11); } -#endif /* TIM11 */ +#endif #if defined(TIM12) else if (TIMx == TIM12) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM12); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM12); } -#endif /* TIM12 */ +#endif #if defined(TIM13) else if (TIMx == TIM13) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM13); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM13); } -#endif /* TIM13 */ +#endif #if defined(TIM14) else if (TIMx == TIM14) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM14); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM14); } -#endif /* TIM14 */ +#endif +#if defined(TIM15) + else if (TIMx == TIM15) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM15); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM15); + } +#endif +#if defined(TIM16) + else if (TIMx == TIM16) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16); + } +#endif +#if defined(TIM17) + else if (TIMx == TIM17) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17); + } +#endif else { result = ERROR; @@ -573,8 +594,6 @@ void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorI * @note Channel 2 is configured in output PWM 2 mode. * @note Compare value stored in TIMx_CCR2 corresponds to the commutation delay. * @note OC2REF is selected as trigger output on TRGO. - * @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used - * when TIMx operates in Hall sensor interface mode. * @param TIMx Timer Instance * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor * interface configuration data structure) @@ -1162,9 +1181,9 @@ static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICIni (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); - /* Select the Polarity and set the CC2E Bit */ + /* Select the Polarity and set the CC4E Bit */ MODIFY_REG(TIMx->CCER, - (TIM_CCER_CC4P | TIM_CCER_CC4NP), + TIM_CCER_CC4P, ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); return SUCCESS; @@ -1179,7 +1198,7 @@ static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICIni * @} */ -#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 */ +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 || TIM15 || TIM16 || TIM17 */ /** * @} @@ -1187,3 +1206,4 @@ static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICIni #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c similarity index 79% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c index 3cf68e3..81d2b4f 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c @@ -1,17 +1,18 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_usart.c + * @file stm32f1xx_ll_usart.c * @author MCD Application Team * @brief USART LL module driver. ****************************************************************************** * @attention * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

* - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -19,20 +20,20 @@ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usart.h" -#include "stm32f4xx_ll_rcc.h" -#include "stm32f4xx_ll_bus.h" +#include "stm32f1xx_ll_usart.h" +#include "stm32f1xx_ll_rcc.h" +#include "stm32f1xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif -/** @addtogroup STM32F4xx_LL_Driver +/** @addtogroup STM32F1xx_LL_Driver * @{ */ -#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART6) || defined (UART4) || defined (UART5) || defined (UART7) || defined (UART8) || defined (UART9) || defined (UART10) +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) /** @addtogroup USART_LL * @{ @@ -57,47 +58,47 @@ /* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available * divided by the smallest oversampling used on the USART (i.e. 8) */ -#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 12500000U) +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 4500000U) /* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ #define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) #define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ - || ((__VALUE__) == LL_USART_DIRECTION_RX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) #define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ - || ((__VALUE__) == LL_USART_PARITY_EVEN) \ - || ((__VALUE__) == LL_USART_PARITY_ODD)) + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) #define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \ - || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) #define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ - || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) #define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ - || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) #define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ - || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) #define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ - || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) #define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ - || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) #define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_1) \ - || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_2)) + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) #define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) /** * @} @@ -154,16 +155,6 @@ ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); } #endif /* USART3 */ -#if defined(USART6) - else if (USARTx == USART6) - { - /* Force reset of USART clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART6); - - /* Release reset of USART clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART6); - } -#endif /* USART6 */ #if defined(UART4) else if (USARTx == UART4) { @@ -184,46 +175,6 @@ ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5); } #endif /* UART5 */ -#if defined(UART7) - else if (USARTx == UART7) - { - /* Force reset of UART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART7); - - /* Release reset of UART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART7); - } -#endif /* UART7 */ -#if defined(UART8) - else if (USARTx == UART8) - { - /* Force reset of UART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART8); - - /* Release reset of UART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART8); - } -#endif /* UART8 */ -#if defined(UART9) - else if (USARTx == UART9) - { - /* Force reset of UART clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_UART9); - - /* Release reset of UART clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_UART9); - } -#endif /* UART9 */ -#if defined(UART10) - else if (USARTx == UART10) - { - /* Force reset of UART clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_UART10); - - /* Release reset of UART clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_UART10); - } -#endif /* UART10 */ else { status = ERROR; @@ -259,7 +210,9 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); +#if defined(USART_CR1_OVER8) assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); +#endif /* USART_OverSampling_Feature */ /* USART needs to be in disabled state, in order to be able to configure some bits in CRx registers */ @@ -272,11 +225,19 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. */ +#if defined(USART_CR1_OVER8) MODIFY_REG(USARTx->CR1, (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), (USART_InitStruct->DataWidth | USART_InitStruct->Parity | USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); +#else + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection)); +#endif /* USART_OverSampling_Feature */ /*---------------------------- USART CR2 Configuration ----------------------- * Configure USARTx CR2 (Stop bits) with parameters: @@ -309,12 +270,6 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini periphclk = rcc_clocks.PCLK1_Frequency; } #endif /* USART3 */ -#if defined(USART6) - else if (USARTx == USART6) - { - periphclk = rcc_clocks.PCLK2_Frequency; - } -#endif /* USART6 */ #if defined(UART4) else if (USARTx == UART4) { @@ -327,30 +282,6 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini periphclk = rcc_clocks.PCLK1_Frequency; } #endif /* UART5 */ -#if defined(UART7) - else if (USARTx == UART7) - { - periphclk = rcc_clocks.PCLK1_Frequency; - } -#endif /* UART7 */ -#if defined(UART8) - else if (USARTx == UART8) - { - periphclk = rcc_clocks.PCLK1_Frequency; - } -#endif /* UART8 */ -#if defined(UART9) - else if (USARTx == UART9) - { - periphclk = rcc_clocks.PCLK2_Frequency; - } -#endif /* UART9 */ -#if defined(UART10) - else if (USARTx == UART10) - { - periphclk = rcc_clocks.PCLK2_Frequency; - } -#endif /* UART10 */ else { /* Nothing to do, as error code is already assigned to ERROR value */ @@ -364,10 +295,16 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini && (USART_InitStruct->BaudRate != 0U)) { status = SUCCESS; +#if defined(USART_CR1_OVER8) LL_USART_SetBaudRate(USARTx, periphclk, USART_InitStruct->OverSampling, USART_InitStruct->BaudRate); +#else + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->BaudRate); +#endif /* USART_OverSampling_Feature */ /* Check BRR is greater than or equal to 16d */ assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); @@ -394,7 +331,9 @@ void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) USART_InitStruct->Parity = LL_USART_PARITY_NONE ; USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; +#if defined(USART_CR1_OVER8) USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +#endif /* USART_OverSampling_Feature */ } /** @@ -489,7 +428,7 @@ void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) * @} */ -#endif /* USART1 || USART2 || USART3 || USART6 || UART4 || UART5 || UART7 || UART8 || UART9 || UART10 */ +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ /** * @} @@ -497,4 +436,5 @@ void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) #endif /* USE_FULL_LL_DRIVER */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c similarity index 63% rename from MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c index 1df5fcf..becbef4 100644 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c @@ -1,6 +1,6 @@ /** ****************************************************************************** - * @file stm32f4xx_ll_usb.c + * @file stm32f1xx_ll_usb.c * @author MCD Application Team * @brief USB Low Layer HAL module driver. * @@ -11,17 +11,6 @@ * + Peripheral Control functions * + Peripheral State functions * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -34,26 +23,36 @@ (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. @endverbatim - + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" +#include "stm32f1xx_hal.h" -/** @addtogroup STM32F4xx_LL_USB_DRIVER +/** @addtogroup STM32F1xx_LL_USB_DRIVER * @{ */ #if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB) || defined (USB_OTG_FS) /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#if defined (USB_OTG_FS) static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); /* Exported functions --------------------------------------------------------*/ @@ -83,48 +82,16 @@ static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) { HAL_StatusTypeDef ret; - if (cfg.phy_itface == USB_OTG_ULPI_PHY) - { - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - /* Init The ULPI Interface */ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); - /* Select vbus source */ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); - if (cfg.use_external_vbus == 1U) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; - } + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; - /* Reset after a PHY select */ - ret = USB_CoreReset(USBx); - } - else /* FS interface (embedded Phy) */ - { - /* Select FS Embedded PHY */ - USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); - /* Reset after a PHY select */ - ret = USB_CoreReset(USBx); - - if (cfg.battery_charging_enable == 0U) - { - /* Activate the USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } - else - { - /* Deactivate the USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } - } - - if (cfg.dma_enable == 1U) - { - USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; - USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; - } + /* Activate the USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; return ret; } @@ -198,10 +165,6 @@ HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, UsbTrd = 0x6U; } } - else if (speed == USBD_HS_SPEED) - { - UsbTrd = USBD_HS_TRDT_VALUE; - } else { UsbTrd = USBD_DEFAULT_TRDT_VALUE; @@ -246,7 +209,7 @@ HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) * @arg USB_HOST_MODE Host mode * @retval HAL status */ -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode) { uint32_t ms = 0U; @@ -304,44 +267,8 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf USBx->DIEPTXF[i] = 0U; } -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* VBUS Sensing setup */ - if (cfg.vbus_sensing_enable == 0U) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - - /* Deactivate VBUS Sensing B */ - USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - /* B-peripheral session valid override enable */ - USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - } - else - { - /* Enable HW VBUS sensing */ - USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -#else - /* VBUS Sensing setup */ - if (cfg.vbus_sensing_enable == 0U) - { - /* - * Disable HW VBUS sensing. VBUS is internally considered to be always - * at VBUS-Valid level (5V). - */ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } - else - { - /* Enable HW VBUS sensing */ - USBx->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + /* Enable HW VBUS sensing */ + USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; /* Restart the Phy Clock */ USBx_PCGCCTL = 0U; @@ -349,24 +276,8 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf /* Device mode configuration */ USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; - if (cfg.phy_itface == USB_OTG_ULPI_PHY) - { - if (cfg.speed == USBD_HS_SPEED) - { - /* Set Core speed to High speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); - } - else - { - /* Set Core speed to Full speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); - } - } - else - { - /* Set Core speed to Full speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); - } + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); /* Flush the FIFOs */ if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ @@ -437,10 +348,7 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf USBx->GINTSTS = 0xBFFFFFFFU; /* Enable the common interrupts */ - if (cfg.dma_enable == 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; /* Enable interrupts matching to the Device mode ONLY */ USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | @@ -462,7 +370,7 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf } /** - * @brief USB_FlushTxFifo Flush a Tx FIFO + * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO * @param USBx Selected device * @param num FIFO number * This parameter can be a value from 1 to 15 @@ -471,28 +379,13 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf */ HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) { - __IO uint32_t count = 0U; + uint32_t count = 0U; - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Flush TX Fifo */ - count = 0U; USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); do { - count++; - - if (count > 200000U) + if (++count > 200000U) { return HAL_TIMEOUT; } @@ -502,34 +395,19 @@ HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) } /** - * @brief USB_FlushRxFifo Flush Rx FIFO + * @brief USB_FlushRxFifo : Flush Rx FIFO * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) { - __IO uint32_t count = 0U; + uint32_t count = 0; - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Flush RX Fifo */ - count = 0U; USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; do { - count++; - - if (count > 200000U) + if (++count > 200000U) { return HAL_TIMEOUT; } @@ -544,8 +422,6 @@ HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) * @param USBx Selected device * @param speed device speed * This parameter can be one of these values: - * @arg USB_OTG_SPEED_HIGH: High speed mode - * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode * @arg USB_OTG_SPEED_FULL: Full speed mode * @retval Hal status */ @@ -562,7 +438,6 @@ HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed) * @param USBx Selected device * @retval speed device speed * This parameter can be one of these values: - * @arg USBD_HS_SPEED: High speed mode * @arg USBD_FS_SPEED: Full speed mode */ uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) @@ -571,12 +446,8 @@ uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) uint8_t speed; uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; - if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) - { - speed = USBD_HS_SPEED; - } - else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || - (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) + if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || + (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) { speed = USBD_FS_SPEED; } @@ -754,13 +625,9 @@ HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, U * @brief USB_EPStartXfer : setup and starts a transfer over an EP * @param USBx Selected device * @param ep pointer to endpoint structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used * @retval HAL status */ -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) { uint32_t USBx_BASE = (uint32_t)USBx; uint32_t epnum = (uint32_t)ep->num; @@ -796,55 +663,29 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); } } + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - if (dma == 1U) + if (ep->type != EP_TYPE_ISOC) { - if ((uint32_t)ep->dma_addr != 0U) + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) { - USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); } else { - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - if (ep->type != EP_TYPE_ISOC) + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) { - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0U) - { - USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); - } + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; } else { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - - (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; } + + (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len); } } else /* OUT endpoint */ @@ -864,18 +705,8 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef else { pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); - ep->xfer_size = ep->maxpacket * pktcnt; - USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); - USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size; - } - - if (dma == 1U) - { - if ((uint32_t)ep->xfer_buff != 0U) - { - USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); - } + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt); } if (ep->type == EP_TYPE_ISOC) @@ -900,13 +731,9 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 * @param USBx Selected device * @param ep pointer to endpoint structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used * @retval HAL status */ -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) { uint32_t USBx_BASE = (uint32_t)USBx; uint32_t epnum = (uint32_t)ep->num; @@ -939,26 +766,13 @@ HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDe USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); } - if (dma == 1U) - { - if ((uint32_t)ep->dma_addr != 0U) - { - USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); - } + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - } - else + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) { - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0U) - { - USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); - } + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); } } else /* OUT endpoint */ @@ -975,19 +789,8 @@ HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDe ep->xfer_len = ep->maxpacket; } - /* Store transfer size, for EP0 this is equal to endpoint max packet size */ - ep->xfer_size = ep->maxpacket; - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size); - - if (dma == 1U) - { - if ((uint32_t)ep->xfer_buff != 0U) - { - USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); - } - } + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket)); /* EP enable */ USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); @@ -996,64 +799,6 @@ HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDe return HAL_OK; } - -/** - * @brief USB_EPStoptXfer Stop transfer on an EP - * @param USBx usb device instance - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - __IO uint32_t count = 0U; - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* EP enable, IN data in FIFO */ - if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_SNAK); - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_EPDIS); - - do - { - count++; - - if (count > 10000U) - { - ret = HAL_ERROR; - break; - } - } while (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA); - } - } - else /* OUT endpoint */ - { - if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_SNAK); - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_EPDIS); - - do - { - count++; - - if (count > 10000U) - { - ret = HAL_ERROR; - break; - } - } while (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA); - } - } - - return ret; -} - - /** * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated * with the EP/channel @@ -1061,31 +806,24 @@ HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef * @param src pointer to source buffer * @param ch_ep_num endpoint or host channel number * @param len Number of bytes to write - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used * @retval HAL status */ HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, - uint8_t ch_ep_num, uint16_t len, uint8_t dma) + uint8_t ch_ep_num, uint16_t len) { uint32_t USBx_BASE = (uint32_t)USBx; uint8_t *pSrc = src; uint32_t count32b; uint32_t i; - if (dma == 0U) + count32b = ((uint32_t)len + 3U) / 4U; + for (i = 0U; i < count32b; i++) { - count32b = ((uint32_t)len + 3U) / 4U; - for (i = 0U; i < count32b; i++) - { - USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); - pSrc++; - pSrc++; - pSrc++; - pSrc++; - } + USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); + pSrc++; + pSrc++; + pSrc++; + pSrc++; } return HAL_OK; @@ -1416,17 +1154,14 @@ HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx) /** * @brief Prepare the EP0 to start the first control setup * @param USBx Selected device - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used * @param psetup pointer to setup packet * @retval HAL status */ -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup) +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup) { uint32_t USBx_BASE = (uint32_t)USBx; uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + UNUSED(psetup); if (gSNPSiD > USB_OTG_CORE_ID_300A) { @@ -1441,13 +1176,6 @@ HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uin USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; - if (dma == 1U) - { - USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; - /* EP enable */ - USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; - } - return HAL_OK; } @@ -1458,14 +1186,12 @@ HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uin */ static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) { - __IO uint32_t count = 0U; + uint32_t count = 0U; /* Wait for AHB master IDLE state. */ do { - count++; - - if (count > 200000U) + if (++count > 200000U) { return HAL_TIMEOUT; } @@ -1477,9 +1203,7 @@ static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) do { - count++; - - if (count > 200000U) + if (++count > 200000U) { return HAL_TIMEOUT; } @@ -1498,59 +1222,21 @@ static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) */ HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) { - HAL_StatusTypeDef ret = HAL_OK; uint32_t USBx_BASE = (uint32_t)USBx; uint32_t i; /* Restart the Phy Clock */ USBx_PCGCCTL = 0U; -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Disable HW VBUS sensing */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); -#else - /* - * Disable HW VBUS sensing. VBUS is internally considered to be always - * at VBUS-Valid level (5V). - */ - USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Disable Battery chargin detector */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - - if ((USBx->CID & (0x1U << 8)) != 0U) - { - if (cfg.speed == USBH_FSLS_SPEED) - { - /* Force Device Enumeration to FS/LS mode only */ - USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; - } - else - { - /* Set default Max speed support */ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } - } - else - { - /* Set default Max speed support */ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } + /* Disable VBUS sensing */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBUSASEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBUSBSEN); + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); /* Make sure the FIFOs are flushed. */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } + (void)USB_FlushTxFifo(USBx, 0x10U); /* all Tx FIFOs */ + (void)USB_FlushRxFifo(USBx); /* Clear all pending HC Interrupts */ for (i = 0U; i < cfg.Host_channels; i++) @@ -1565,33 +1251,19 @@ HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef c /* Clear any pending interrupts */ USBx->GINTSTS = 0xFFFFFFFFU; - if ((USBx->CID & (0x1U << 8)) != 0U) - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = 0x200U; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); - USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); - } - else - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = 0x80U; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); - USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); - } - + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x80U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); + USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); /* Enable the common interrupts */ - if (cfg.dma_enable == 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; /* Enable interrupts matching to the Host mode ONLY */ USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); - return ret; + return HAL_OK; } /** @@ -1687,7 +1359,6 @@ HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state) * @param USBx Selected device * @retval speed : Host speed * This parameter can be one of these values: - * @arg HCD_SPEED_HIGH: High speed mode * @arg HCD_SPEED_FULL: Full speed mode * @arg HCD_SPEED_LOW: Low speed mode */ @@ -1723,7 +1394,6 @@ uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx) * This parameter can be a value from 0 to 255 * @param speed Current device speed * This parameter can be one of these values: - * @arg USB_OTG_SPEED_HIGH: High speed mode * @arg USB_OTG_SPEED_FULL: Full speed mode * @arg USB_OTG_SPEED_LOW: Low speed mode * @param ep_type Endpoint Type @@ -1765,14 +1435,6 @@ HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, { USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; } - else - { - if ((USBx->CID & (0x1U << 8)) != 0U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET | - USB_OTG_HCINTMSK_ACKM; - } - } break; case EP_TYPE_INTR: @@ -1808,9 +1470,6 @@ HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, break; } - /* Enable host channel Halt interrupt */ - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM; - /* Enable the top level host channel interrupt. */ USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); @@ -1844,9 +1503,9 @@ HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed; - if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC)) + if (ep_type == EP_TYPE_INTR) { - USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; + USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ; } return ret; @@ -1856,13 +1515,9 @@ HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, * @brief Start a transfer over a host channel * @param USBx Selected device * @param hc pointer to host channel structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used * @retval HAL state */ -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc) { uint32_t USBx_BASE = (uint32_t)USBx; uint32_t ch_num = (uint32_t)hc->ch_num; @@ -1872,24 +1527,6 @@ HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDe uint16_t num_packets; uint16_t max_hc_pkt_count = 256U; - if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED)) - { - /* in DMA mode host Core automatically issues ping in case of NYET/NAK */ - if ((dma == 1U) && ((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK))) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | - USB_OTG_HCINTMSK_ACKM | - USB_OTG_HCINTMSK_NAKM); - } - - if ((dma == 0U) && (hc->do_ping == 1U)) - { - (void)USB_DoPing(USBx, hc->ch_num); - return HAL_OK; - } - - } - /* Compute the expected number of packets associated to the transfer */ if (hc->xfer_len > 0U) { @@ -1924,12 +1561,6 @@ HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDe (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); - if (dma != 0U) - { - /* xfer_buff MUST be 32-bits aligned */ - USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; - } - is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; @@ -1950,11 +1581,6 @@ HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDe tmpreg |= USB_OTG_HCCHAR_CHENA; USBx_HC(ch_num)->HCCHAR = tmpreg; - if (dma != 0U) /* dma mode */ - { - return HAL_OK; - } - if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U)) { switch (hc->ep_type) @@ -1990,7 +1616,7 @@ HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDe } /* Write packet into the Tx FIFO. */ - (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); + (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len); } return HAL_OK; @@ -2019,7 +1645,7 @@ HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) { uint32_t USBx_BASE = (uint32_t)USBx; uint32_t hcnum = (uint32_t)hc_num; - __IO uint32_t count = 0U; + uint32_t count = 0U; uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31; @@ -2040,11 +1666,10 @@ HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) { USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; do { - count++; - - if (count > 1000U) + if (++count > 1000U) { break; } @@ -2064,11 +1689,10 @@ HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) { USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; do { - count++; - - if (count > 1000U) + if (++count > 1000U) { break; } @@ -2116,24 +1740,16 @@ HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) */ HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) { - HAL_StatusTypeDef ret = HAL_OK; uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t count = 0U; + uint32_t count = 0U; uint32_t value; uint32_t i; (void)USB_DisableGlobalInt(USBx); - /* Flush USB FIFO */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } + /* Flush FIFO */ + (void)USB_FlushTxFifo(USBx, 0x10U); + (void)USB_FlushRxFifo(USBx); /* Flush out any leftover queued requests. */ for (i = 0U; i <= 15U; i++) @@ -2156,9 +1772,7 @@ HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) do { - count++; - - if (count > 1000U) + if (++count > 1000U) { break; } @@ -2169,9 +1783,7 @@ HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) USBx_HOST->HAINT = 0xFFFFFFFFU; USBx->GINTSTS = 0xFFFFFFFFU; - (void)USB_EnableGlobalInt(USBx); - - return ret; + return HAL_OK; } /** @@ -2206,8 +1818,941 @@ HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) return HAL_OK; } -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(cfg); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM; + + /* Set interrupt mask */ + USBx->CNTR = (uint16_t)winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM; + + /* Clear interrupt mask */ + USBx->CNTR &= (uint16_t)(~winterruptmask); + + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(mode); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(cfg); + + /* Init Device */ + /* CNTR_FRES = 1 */ + USBx->CNTR = (uint16_t)USB_CNTR_FRES; + + /* CNTR_FRES = 0 */ + USBx->CNTR = 0U; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + /*Set Btable Address*/ + USBx->BTABLE = BTABLE_ADDRESS; + + return HAL_OK; +} + +/** + * @brief USB_FlushTxFifo : Flush a Tx FIFO + * @param USBx : Selected device + * @param num : FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(num); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +#if defined (HAL_PCD_MODULE_ENABLED) +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint16_t wEpRegVal; + + wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK; + + /* initialize Endpoint */ + switch (ep->type) + { + case EP_TYPE_CTRL: + wEpRegVal |= USB_EP_CONTROL; + break; + + case EP_TYPE_BULK: + wEpRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wEpRegVal |= USB_EP_INTERRUPT; + break; + + case EP_TYPE_ISOC: + wEpRegVal |= USB_EP_ISOCHRONOUS; + break; + + default: + ret = HAL_ERROR; + break; + } + + PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); + + PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); + + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + } + else + { + /*Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + + /*Set the endpoint Receive buffer counter*/ + PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + /*Double Buffer*/ + else + { + /* Set the endpoint as double buffered */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* Set buffer address for double buffered mode */ + PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); + + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return ret; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + /*Double Buffer*/ + else + { + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + uint32_t len; + uint16_t pmabuffer; + uint16_t wEPVal; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + } + else + { + len = ep->xfer_len; + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0U) + { + USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len); + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + } + else + { + /* double buffer bulk management */ + if (ep->type == EP_TYPE_BULK) + { + if (ep->xfer_len_db > ep->maxpacket) + { + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the two first buffer in the Buffer0 & Buffer1 */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + /* auto Switch to single buffer mode when transfer xfer_len_db; + + /* disable double buffer mode */ + PCD_CLEAR_EP_DBUF(USBx, ep->num); + + /* Set Tx count with nbre of byte to be transmitted */ + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + }/* end if bulk double buffer */ + + /* manage isochronous double buffer IN mode */ + else + { + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the data buffer */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + if (len > 0U) + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + if (len > 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + } + } + + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + } + else /* OUT endpoint */ + { + if (ep->doublebuffer == 0U) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + /* configure and validate Rx endpoint */ + PCD_SET_EP_RX_CNT(USBx, ep->num, len); + } + else + { + /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ + /* Set the Double buffer counter */ + if (ep->type == EP_TYPE_BULK) + { + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); + + /* Coming from ISR */ + if (ep->xfer_count != 0U) + { + /* update last value to check if there is blocking state */ + wEPVal = PCD_GET_ENDPOINT(USBx, ep->num); + + /*Blocking State */ + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + { + PCD_FreeUserBuffer(USBx, ep->num, 0U); + } + } + } + /* iso out double */ + else if (ep->type == EP_TYPE_ISOC) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + } + else + { + return HAL_ERROR; + } + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPSetStall set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->is_in != 0U) + { + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL); + } + else + { + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL); + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + + return HAL_OK; +} +#endif + +/** + * @brief USB_StopDevice Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) +{ + /* disable all interrupts and force USB reset */ + USBx->CNTR = (uint16_t)USB_CNTR_FRES; + + /* clear interrupt status register */ + USBx->ISTR = 0U; + + /* switch-off device */ + USBx->CNTR = (uint16_t)(USB_CNTR_FRES | USB_CNTR_PDWN); + + return HAL_OK; +} + +/** + * @brief USB_SetDevAddress Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address) +{ + if (address == 0U) + { + /* set device address and enable function */ + USBx->DADDR = (uint16_t)USB_DADDR_EF; + } + + return HAL_OK; +} + +/** + * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_TypeDef *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->ISTR; + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(epnum); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(epnum); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(interrupt); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(psetup); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) +{ + USBx->CNTR |= (uint16_t)USB_CNTR_RESUME; + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) +{ + USBx->CNTR &= (uint16_t)(~USB_CNTR_RESUME); + + return HAL_OK; +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t n = ((uint32_t)wNBytes + 1U) >> 1; + uint32_t BaseAddr = (uint32_t)USBx; + uint32_t i, temp1, temp2; + __IO uint16_t *pdwVal; + uint8_t *pBuf = pbUsrBuf; + + pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); + + for (i = n; i != 0U; i--) + { + temp1 = *pBuf; + pBuf++; + temp2 = temp1 | ((uint16_t)((uint16_t) *pBuf << 8)); + *pdwVal = (uint16_t)temp2; + pdwVal++; + +#if PMA_ACCESS > 1U + pdwVal++; +#endif + + pBuf++; + } +} + +/** + * @brief Copy data from packet memory area (PMA) to user memory buffer + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t n = (uint32_t)wNBytes >> 1; + uint32_t BaseAddr = (uint32_t)USBx; + uint32_t i, temp; + __IO uint16_t *pdwVal; + uint8_t *pBuf = pbUsrBuf; + + pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); + + for (i = n; i != 0U; i--) + { + temp = *(__IO uint16_t *)pdwVal; + pdwVal++; + *pBuf = (uint8_t)((temp >> 0) & 0xFFU); + pBuf++; + *pBuf = (uint8_t)((temp >> 8) & 0xFFU); + pBuf++; + +#if PMA_ACCESS > 1U + pdwVal++; +#endif + } + + if ((wNBytes % 2U) != 0U) + { + temp = *pdwVal; + *pBuf = (uint8_t)((temp >> 0) & 0xFFU); + } +} +#endif /* defined (USB) */ /** * @} @@ -2216,9 +2761,11 @@ HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) /** * @} */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ #endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ /** * @} */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c new file mode 100644 index 0000000..ce0ffce --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c @@ -0,0 +1,770 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_utils.c + * @author MCD Application Team + * @brief UTILS LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_rcc.h" +#include "stm32f1xx_ll_utils.h" +#include "stm32f1xx_ll_system.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +/** @addtogroup UTILS_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Constants + * @{ + */ + +/* Defines used for PLL range */ +#define UTILS_PLL_OUTPUT_MAX RCC_MAX_FREQUENCY /*!< Frequency max for PLL output, in Hz */ +#define UTILS_PLL2_OUTPUT_MAX RCC_MAX_FREQUENCY /*!< Frequency max for PLL2 output, in Hz */ + +/* Defines used for HSE range */ +#define UTILS_HSE_FREQUENCY_MIN RCC_HSE_MIN /*!< Frequency min for HSE frequency, in Hz */ +#define UTILS_HSE_FREQUENCY_MAX RCC_HSE_MAX /*!< Frequency max for HSE frequency, in Hz */ + +/* Defines used for FLASH latency according to HCLK Frequency */ +#if defined(FLASH_ACR_LATENCY) +#define UTILS_LATENCY1_FREQ 24000000U /*!< SYSCLK frequency to set FLASH latency 1 */ +#define UTILS_LATENCY2_FREQ 48000000U /*!< SYSCLK frequency to set FLASH latency 2 */ +#else +/*!< No Latency Configuration in this device */ +#endif +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Macros + * @{ + */ +#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) + +#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_16)) + +#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_16)) + +#if defined(RCC_CFGR_PLLMULL6_5) +#define IS_LL_UTILS_PLLMUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_MUL_4) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_5) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_6) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_7) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_8) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_9) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_6_5)) +#else +#define IS_LL_UTILS_PLLMUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_MUL_2) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_3) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_4) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_5) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_6) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_7) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_8) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_9) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_10) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_11) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_12) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_13) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_14) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_15) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_16)) +#endif /* RCC_CFGR_PLLMULL6_5 */ + +#if defined(RCC_CFGR2_PREDIV1) +#define IS_LL_UTILS_PREDIV_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PREDIV_DIV_1) || ((__VALUE__) == LL_RCC_PREDIV_DIV_2) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_3) || ((__VALUE__) == LL_RCC_PREDIV_DIV_4) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_5) || ((__VALUE__) == LL_RCC_PREDIV_DIV_6) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_7) || ((__VALUE__) == LL_RCC_PREDIV_DIV_8) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_9) || ((__VALUE__) == LL_RCC_PREDIV_DIV_10) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_11) || ((__VALUE__) == LL_RCC_PREDIV_DIV_12) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_13) || ((__VALUE__) == LL_RCC_PREDIV_DIV_14) || \ + ((__VALUE__) == LL_RCC_PREDIV_DIV_15) || ((__VALUE__) == LL_RCC_PREDIV_DIV_16)) +#else +#define IS_LL_UTILS_PREDIV_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PREDIV_DIV_1) || ((__VALUE__) == LL_RCC_PREDIV_DIV_2)) +#endif /*RCC_PREDIV1_DIV_2_16_SUPPORT*/ + +#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((__VALUE__) <= UTILS_PLL_OUTPUT_MAX) + +#if defined(RCC_PLL2_SUPPORT) +#define IS_LL_UTILS_PLL2MUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL2_MUL_8) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_9) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_10) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_11) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_12) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_13) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_14) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_16) \ + || ((__VALUE__) == LL_RCC_PLL2_MUL_20)) + +#define IS_LL_UTILS_PREDIV2_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_1) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_2) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_3) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_4) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_5) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_6) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_7) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_8) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_9) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_10) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_11) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_12) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_13) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_14) || \ + ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_15) || ((__VALUE__) == LL_RCC_HSE_PREDIV2_DIV_16)) + +#define IS_LL_UTILS_PLL2_FREQUENCY(__VALUE__) ((__VALUE__) <= UTILS_PLL2_OUTPUT_MAX) +#endif /* RCC_PLL2_SUPPORT */ + +#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ + || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) + +#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Functions UTILS Private functions + * @{ + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); +static ErrorStatus UTILS_PLL_HSE_ConfigSystemClock(uint32_t PLL_InputFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +#if defined(RCC_PLL2_SUPPORT) +static uint32_t UTILS_GetPLL2OutputFrequency(uint32_t PLL2_InputFrequency, + LL_UTILS_PLLInitTypeDef *UTILS_PLL2InitStruct); +#endif /* RCC_PLL2_SUPPORT */ +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +static ErrorStatus UTILS_PLL_IsBusy(void); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UTILS_LL_EF_DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source to have 1ms time base. + * @note When a RTOS is used, it is recommended to avoid changing the Systick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param HCLKFrequency HCLK frequency in Hz + * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq + * @retval None + */ +void LL_Init1msTick(uint32_t HCLKFrequency) +{ + /* Use frequency provided in argument */ + LL_InitTick(HCLKFrequency, 1000U); +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on SysTick counter flag + * @note When a RTOS is used, it is recommended to avoid using blocking delay + * and use rather osDelay service. + * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which + * will configure Systick to 1ms + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +void LL_mDelay(uint32_t Delay) +{ + __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ + /* Add this code to indicate that local variable is not used */ + ((void)tmp); + + /* Add a period to guaranty minimum wait */ + if (Delay < LL_MAX_DELAY) + { + Delay++; + } + + while (Delay) + { + if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) + { + Delay--; + } + } +} + +/** + * @} + */ + +/** @addtogroup UTILS_EF_SYSTEM + * @brief System Configuration functions + * + @verbatim + =============================================================================== + ##### System Configuration functions ##### + =============================================================================== + [..] + System, AHB and APB buses clocks configuration + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is RCC_MAX_FREQUENCY Hz. + @endverbatim + @internal + Depending on the SYSCLK frequency, the flash latency should be adapted accordingly: + (++) +-----------------------------------------------+ + (++) | Latency | SYSCLK clock frequency (MHz) | + (++) |---------------|-------------------------------| + (++) |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | + (++) |---------------|-------------------------------| + (++) |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | + (++) |---------------|-------------------------------| + (++) |2WS(3CPU cycle)| 48 < SYSCLK <= 72 | + (++) +-----------------------------------------------+ + @endinternal + * @{ + */ + +/** + * @brief This function sets directly SystemCoreClock CMSIS variable. + * @note Variable can be calculated also through SystemCoreClockUpdate function. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @retval None + */ +void LL_SetSystemCoreClock(uint32_t HCLKFrequency) +{ + /* HCLK clock frequency */ + SystemCoreClock = HCLKFrequency; +} + +/** + * @brief Update number of Flash wait states in line with new frequency and current + voltage range. + * @param Frequency SYSCLK frequency + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Latency has been modified + * - ERROR: Latency cannot be modified + */ +#if defined(FLASH_ACR_LATENCY) +ErrorStatus LL_SetFlashLatency(uint32_t Frequency) +{ + uint32_t timeout; + uint32_t getlatency; + uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ + ErrorStatus status = SUCCESS; + + /* Frequency cannot be equal to 0 */ + if (Frequency == 0U) + { + status = ERROR; + } + else + { + if (Frequency > UTILS_LATENCY2_FREQ) + { + /* 48 < SYSCLK <= 72 => 2WS (3 CPU cycles) */ + latency = LL_FLASH_LATENCY_2; + } + else + { + if (Frequency > UTILS_LATENCY1_FREQ) + { + /* 24 < SYSCLK <= 48 => 1WS (2 CPU cycles) */ + latency = LL_FLASH_LATENCY_1; + } + else + { + /* else SYSCLK < 24MHz default LL_FLASH_LATENCY_0 0WS */ + latency = LL_FLASH_LATENCY_0; + } + } + + if (status != ERROR) + { + LL_FLASH_SetLatency(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + timeout = 2; + do + { + /* Wait for Flash latency to be updated */ + getlatency = LL_FLASH_GetLatency(); + timeout--; + } + while ((getlatency != latency) && (timeout > 0)); + + if (getlatency != latency) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + } + + return status; +} +#endif /* FLASH_ACR_LATENCY */ + +/** + * @brief This function configures system clock with HSI as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = ((HSI frequency / PREDIV) * PLLMUL) + * - PREDIV: Set to 2 for few devices + * - PLLMUL: The application software must set correctly the PLL multiplication factor to + * not exceed 72MHz + * @note FLASH latency can be modified through this function. + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t pllfreq = 0U; + + /* Check if one of the PLL is enabled */ + if (UTILS_PLL_IsBusy() == SUCCESS) + { +#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) + /* Check PREDIV value */ + assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv)); +#else + /* Force PREDIV value to 2 */ + UTILS_PLLInitStruct->Prediv = LL_RCC_PREDIV_DIV_2; +#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/ + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); + + /* Enable HSI if not enabled */ + if (LL_RCC_HSI_IsReady() != 1U) + { + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + { + /* Wait for HSI ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI_DIV_2, UTILS_PLLInitStruct->PLLMul); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief This function configures system clock with HSE as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = ((HSI frequency / PREDIV) * PLLMUL) + * - PREDIV: Set to 2 for few devices + * - PLLMUL: The application software must set correctly the PLL multiplication factor to + * not exceed @ref UTILS_PLL_OUTPUT_MAX + * @note FLASH latency can be modified through this function. + * @param HSEFrequency Value between Min_Data = RCC_HSE_MIN and Max_Data = RCC_HSE_MAX + * @param HSEBypass This parameter can be one of the following values: + * @arg @ref LL_UTILS_HSEBYPASS_ON + * @arg @ref LL_UTILS_HSEBYPASS_OFF + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t pllfrequency = 0U; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); + assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); + assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->Prediv)); + + /* Calculate the new PLL output frequency */ + pllfrequency = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); + + /* Enable HSE if not enabled */ + status = UTILS_PLL_HSE_ConfigSystemClock(HSEFrequency, HSEBypass, UTILS_PLLInitStruct, UTILS_ClkInitStruct); + + /* Check if HSE is not enabled*/ + if (status == SUCCESS) + { + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_SYS((LL_RCC_PLLSOURCE_HSE | UTILS_PLLInitStruct->Prediv), UTILS_PLLInitStruct->PLLMul); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfrequency, UTILS_ClkInitStruct); + } + + return status; +} + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief This function configures system clock with HSE as clock source of the PLL, via PLL2 + * @note The application need to ensure that PLL and PLL2 are disabled. + * @note Function is based on the following formula: + * - PLL output frequency = ((((HSE frequency / PREDIV2) * PLL2MUL) / PREDIV) * PLLMUL) + * - PREDIV, PLLMUL, PREDIV2, PLL2MUL: The application software must set correctly the + * PLL multiplication factor to not exceed @ref UTILS_PLL_OUTPUT_MAX + * @note FLASH latency can be modified through this function. + * @param HSEFrequency Value between Min_Data = RCC_HSE_MIN and Max_Data = RCC_HSE_MAX + * @param HSEBypass This parameter can be one of the following values: + * @arg @ref LL_UTILS_HSEBYPASS_ON + * @arg @ref LL_UTILS_HSEBYPASS_OFF + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_PLL2InitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL2. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_PLL2(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_PLLInitTypeDef *UTILS_PLL2InitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t pllfrequency = 0U; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); + assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); + assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->Prediv)); + assert_param(IS_LL_UTILS_PREDIV2_VALUE(UTILS_PLL2InitStruct->Prediv)); + + /* Calculate the new PLL output frequency */ + pllfrequency = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); + + /* Enable HSE if not enabled */ + status = UTILS_PLL_HSE_ConfigSystemClock(HSEFrequency, HSEBypass, UTILS_PLLInitStruct, UTILS_ClkInitStruct); + + /* Check if HSE is not enabled*/ + if (status == SUCCESS) + { + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_PLL2(UTILS_PLL2InitStruct->Prediv, UTILS_PLL2InitStruct->PLLMul); + LL_RCC_PLL_ConfigDomain_SYS((LL_RCC_PLLSOURCE_PLL2 | UTILS_PLLInitStruct->Prediv), UTILS_PLLInitStruct->PLLMul); + + /* Calculate the new PLL output frequency */ + pllfrequency = UTILS_GetPLL2OutputFrequency(pllfrequency, UTILS_PLL2InitStruct); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfrequency, UTILS_ClkInitStruct); + } + + return status; +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UTILS_LL_Private_Functions + * @{ + */ +/** + * @brief Function to check that PLL can be modified + * @param PLL_InputFrequency PLL input frequency (in Hz) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @retval PLL output frequency (in Hz) + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) +{ + uint32_t pllfreq = 0U; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLMUL_VALUE(UTILS_PLLInitStruct->PLLMul)); + + /* Check different PLL parameters according to RM */ +#if defined (RCC_CFGR2_PREDIV1) + pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency / (UTILS_PLLInitStruct->Prediv + 1U), UTILS_PLLInitStruct->PLLMul); +#else + pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency / ((UTILS_PLLInitStruct->Prediv >> RCC_CFGR_PLLXTPRE_Pos) + 1U), UTILS_PLLInitStruct->PLLMul); +#endif /*RCC_CFGR2_PREDIV1SRC*/ + assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); + + return pllfreq; +} + +/** + * @brief This function enable the HSE when it is used by PLL or PLL2 + * @note The application need to ensure that PLL is disabled. + * @param HSEFrequency Value between Min_Data = RCC_HSE_MIN and Max_Data = RCC_HSE_MAX + * @param HSEBypass This parameter can be one of the following values: + * @arg @ref LL_UTILS_HSEBYPASS_ON + * @arg @ref LL_UTILS_HSEBYPASS_OFF + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: HSE configuration done + * - ERROR: HSE configuration not done + */ +static ErrorStatus UTILS_PLL_HSE_ConfigSystemClock(uint32_t PLL_InputFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check if one of the PLL is enabled */ + if (UTILS_PLL_IsBusy() == SUCCESS) + { + /* Enable HSE if not enabled */ + if (LL_RCC_HSE_IsReady() != 1U) + { + /* Check if need to enable HSE bypass feature or not */ + if (HSEBypass == LL_UTILS_HSEBYPASS_ON) + { + LL_RCC_HSE_EnableBypass(); + } + else + { + LL_RCC_HSE_DisableBypass(); + } + + /* Enable HSE */ + LL_RCC_HSE_Enable(); + while (LL_RCC_HSE_IsReady() != 1U) + { + /* Wait for HSE ready */ + } + } + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +#if defined(RCC_PLL2_SUPPORT) +/** + * @brief Function to check that PLL2 can be modified + * @param PLL2_InputFrequency PLL2 input frequency (in Hz) + * @param UTILS_PLL2InitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @retval PLL2 output frequency (in Hz) + */ +static uint32_t UTILS_GetPLL2OutputFrequency(uint32_t PLL2_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLL2InitStruct) +{ + uint32_t pll2freq = 0U; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLL2MUL_VALUE(UTILS_PLL2InitStruct->PLLMul)); + assert_param(IS_LL_UTILS_PREDIV2_VALUE(UTILS_PLL2InitStruct->Prediv)); + + /* Check different PLL2 parameters according to RM */ + pll2freq = __LL_RCC_CALC_PLL2CLK_FREQ(PLL2_InputFrequency, UTILS_PLL2InitStruct->PLLMul, UTILS_PLL2InitStruct->Prediv); + assert_param(IS_LL_UTILS_PLL2_FREQUENCY(pll2freq)); + + return pll2freq; +} +#endif /* RCC_PLL2_SUPPORT */ + +/** + * @brief Function to check that PLL can be modified + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PLL modification can be done + * - ERROR: PLL is busy + */ +static ErrorStatus UTILS_PLL_IsBusy(void) +{ + ErrorStatus status = SUCCESS; + + /* Check if PLL is busy*/ + if (LL_RCC_PLL_IsReady() != 0U) + { + /* PLL configuration cannot be modified */ + status = ERROR; + } +#if defined(RCC_PLL2_SUPPORT) + /* Check if PLL2 is busy*/ + if (LL_RCC_PLL2_IsReady() != 0U) + { + /* PLL2 configuration cannot be modified */ + status = ERROR; + } +#endif /* RCC_PLL2_SUPPORT */ + +#if defined(RCC_PLLI2S_SUPPORT) + /* Check if PLLI2S is busy*/ + if (LL_RCC_PLLI2S_IsReady() != 0U) + { + /* PLLI2S configuration cannot be modified */ + status = ERROR; + } +#endif /* RCC_PLLI2S_SUPPORT */ + + return status; +} + +/** + * @brief Function to enable PLL and switch system clock to PLL + * @param SYSCLK_Frequency SYSCLK frequency + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: No problem to switch system to PLL + * - ERROR: Problem to switch system to PLL + */ +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; +#if defined(FLASH_ACR_LATENCY) + uint32_t sysclk_frequency_current = 0U; +#endif /* FLASH_ACR_LATENCY */ + + assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); + assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); + assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider)); + +#if defined(FLASH_ACR_LATENCY) + /* Calculate current SYSCLK frequency */ + sysclk_frequency_current = (SystemCoreClock << AHBPrescTable[LL_RCC_GetAHBPrescaler() >> RCC_CFGR_HPRE_Pos]); +#endif /* FLASH_ACR_LATENCY */ + + /* Increasing the number of wait states because of higher CPU frequency */ +#if defined (FLASH_ACR_LATENCY) + if (sysclk_frequency_current < SYSCLK_Frequency) + { + /* Set FLASH latency to highest latency */ + status = LL_SetFlashLatency(SYSCLK_Frequency); + } +#endif /* FLASH_ACR_LATENCY */ + + /* Update system clock configuration */ + if (status == SUCCESS) + { +#if defined(RCC_PLL2_SUPPORT) + if (LL_RCC_PLL_GetMainSource() != LL_RCC_PLLSOURCE_HSI_DIV_2) + { + /* Enable PLL2 */ + LL_RCC_PLL2_Enable(); + while (LL_RCC_PLL2_IsReady() != 1U) + { + /* Wait for PLL2 ready */ + } + } +#endif /* RCC_PLL2_SUPPORT */ + /* Enable PLL */ + LL_RCC_PLL_Enable(); + while (LL_RCC_PLL_IsReady() != 1U) + { + /* Wait for PLL ready */ + } + + /* Sysclk activation on the main PLL */ + LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) + { + /* Wait for system clock switch to PLL */ + } + + /* Set APB1 & APB2 prescaler*/ + LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); + LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider); + } + + /* Decreasing the number of wait states because of lower CPU frequency */ +#if defined (FLASH_ACR_LATENCY) + if (sysclk_frequency_current > SYSCLK_Frequency) + { + /* Set FLASH latency to lowest latency */ + status = LL_SetFlashLatency(SYSCLK_Frequency); + } +#endif /* FLASH_ACR_LATENCY */ + + /* Update SystemCoreClock variable */ + if (status == SUCCESS) + { + LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider)); + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.c new file mode 100644 index 0000000..2efe0d1 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.c @@ -0,0 +1,36 @@ +#include "stm32f1xx_matlab_gpio.h" + + + +void GPIO_to_SFUNC(real_T *disc) +{ + for (int i = 0; i < PORT_WIDTH; i++) + { + if (GPIOA->ODR & (1 << i)) + { + disc[i] = 1; + } + + if (GPIOB->ODR & (1 << i)) + { + disc[PORT_WIDTH + i] = 1; + } + } +} + + + +void SFUNC_to_GPIO(real_T* in) +{ + for (int i = 0; i < PORT_WIDTH; i++) + { + if (in[i] > 0.5) + { + GPIOA->IDR |= (1 << i); + } + else + { + GPIOA->IDR &= ~(1 << i); + } + } +} \ No newline at end of file diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.h new file mode 100644 index 0000000..3056a22 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_gpio.h @@ -0,0 +1,22 @@ +#ifndef _MATLAB_GPIO_H_ +#define _MATLAB_GPIO_H_ + +#include "simstruc.h" +#include "mcu_wrapper_conf.h" + +/* GPIO) */ +#define GET_GPIO_CONF(_reg_, _pos_) ((_pos_ < 8)? \ + GET_BITS_FROM_REG(_reg_->CRL, GPIO_CRL_CNF0 << (_pos_<<2u), (_pos_<<2u)+GPIO_CRL_CNF0_Pos): \ + GET_BITS_FROM_REG(_reg_->CRH, GPIO_CRL_CNF0 << ((_pos_-8)<<2u), ((_pos_-8)<<2u)+GPIO_CRL_CNF0_Pos) ) + +/* GPIO) */ +#define GET_GPIO_MODE(_reg_, _pos_) ((_pos_ < 8)? \ + GET_BITS_FROM_REG(_reg_->CRL, GPIO_CRL_MODE0 << (_pos_<<2u), (_pos_<<2u)+GPIO_CRL_MODE0_Pos): \ + GET_BITS_FROM_REG(_reg_->CRH, GPIO_CRL_MODE0 << ((_pos_-8)<<2u), ((_pos_-8)<<2u)+GPIO_CRL_MODE0_Pos) ) + + + +void SFUNC_to_GPIO(real_T* disc); +void GPIO_to_SFUNC(real_T* in); + +#endif // _MATLAB_GPIO_H_ \ No newline at end of file diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.c new file mode 100644 index 0000000..e69de29 diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.h new file mode 100644 index 0000000..6fc5019 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_rcc.h @@ -0,0 +1,36 @@ +#ifndef _MATLAB_RCC_H_ +#define _MATLAB_RCC_H_ + +#include "mcu_wrapper_conf.h" + + + +//#define SYSLCK_Value ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) +//#define AHB_Prescaler ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) +//#define AHB_Prescaler ((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos) + +#define HCLK_Value (double)72000000; +#define ABP1_Value (double)36000000; +#define ABP1_TIMS_Value (double)72000000; +#define ABP2_Value (double)72000000; +#define ABP2_TIMS_Value (double)72000000; + +/* stm32f4xx_hal_rcc.c, */ +/* MCU_Periph_Simulation(), */ +#define _RCC_SET_FLAG(__FLAG__) \ +if(((__FLAG__) >> 5U) == 1U) RCC->CR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)); \ +else if(((__FLAG__) >> 5U) == 2U) RCC->BDCR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)); \ +else if(((__FLAG__) >> 5U) == 3U) RCC->CSR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)); \ + +#define _RCC_CLEAR_FLAG(__FLAG__) \ +if(((__FLAG__) >> 5U) == 1U) RCC->CR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)); \ +else if(((__FLAG__) >> 5U) == 2U) RCC->BDCR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)); \ +else if(((__FLAG__) >> 5U) == 3U) RCC->CSR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)); \ + +#define Set_Flag_If_Its_Expected(_flag_, _condition_) \ +if(_condition_) _RCC_CLEAR_FLAG(_flag_) + +#define Clear_Flag_If_Its_Expected(_flag_, _condition_) \ +if(_condition_) _RCC_SET_FLAG(_flag_) + +#endif // _MATLAB_RCC_H_ \ No newline at end of file diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.c similarity index 60% rename from MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.c rename to MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.c index f85a6c3..d82c355 100644 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.c +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.c @@ -1,30 +1,16 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab_tim.c -* @brief Исходный код симулятора таймеров. -************************************************************************** -@details +/************************************************************************** Данный файл содержит функции для симуляции таймеров STM32F407xx. + **************************************************************************/ -#include "stm32f4xx_matlab_tim.h" +#include "stm32f1xx_matlab_tim.h" -struct SlaveChannels Slave_Channels; ///< структура для связи и синхронизации таймеров +struct SlaveChannels Slave_Channels; // структура для связи и синхронизации таймеров //----------------------TIMER BASE FUNCTIONS-----------------------// -/** - * @brief Симуляция таймера на один такт симуляции. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Это базовая функция для симуляции таймера: она вызывается каждый шаг симуляции - * и вызывает все другие функции, необходимые для симуляции: - * - Overflow_Check() - * - Slave_Mode_Check_Source() - * - TIMx_Count() - * - Channels_Simulation() - */ +/* Базовая функция для симуляции таймера: она вызывается каждый шаг симуляции */ void TIM_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) { Overflow_Check(TIMx, TIMS); @@ -32,51 +18,34 @@ void TIM_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) // Выбор режима работы таймера - switch (TIMx->SMCR & TIM_SMCR_SMS) // TIMER MODE - { - // обычный счет - case(TIM_SLAVEMODE_DISABLE):// NORMAL MODE counting - TIMx_Count(TIMx, TIMS); - Channels_Simulation(TIMx, TIMS); // CaptureCompare and PWM channels simulation - break; +switch (TIMx->SMCR & TIM_SMCR_SMS) // TIMER MODE +{ + // обычный счет + case(TIM_SLAVEMODE_DISABLE):// NORMAL MODE counting + TIMx_Count(TIMx, TIMS); + Channels_Simulation(TIMx, TIMS); // CaptureCompare and PWM channels simulation + break; - // включение слейв таймера по ивенту - case(TIM_SLAVEMODE_TRIGGER): // SLAVE MODE: TRIGGER MODE - Slave_Mode_Check_Source(TIMx, TIMS); - TIMx_Count(TIMx, TIMS); - Channels_Simulation(TIMx, TIMS); // CaptureCompare and PWM channels simulation - break; - } + // включение слейв таймера по ивенту + case(TIM_SLAVEMODE_TRIGGER): // SLAVE MODE: TRIGGER MODE + Slave_Mode_Check_Source(TIMx, TIMS); + TIMx_Count(TIMx, TIMS); + Channels_Simulation(TIMx, TIMS); // CaptureCompare and PWM channels simulation + break; +} } -/** - * @brief Симуляция счетчика таймера на один такт симуляции. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция проверяет направление таймера и увеличивает или уменьшает - * значение счетчика на то число, на которое оно бы увеличилось за шаг симуляции. - * @note Для счетчика используется double формат, т.к. кол-во счетов за шаг симуляции - может быть дробным. После в конце функции double счетчик записывает с округлением - в регистр таймера CNT. - */ +/* Счет таймера за один такт */ void TIMx_Count(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) { if ((TIMx->CR1 & TIM_CR1_DIR) && TIMx->CR1) // up COUNTER and COUNTER ENABLE - TIMS->tx_cnt -= TIMS->tx_step / TIMx->PSC; + TIMS->tx_cnt -= TIMS->tx_step / (TIMx->PSC + 1); else if (((TIMx->CR1 & TIM_CR1_DIR) == 0) && TIMx->CR1) // down COUNTER and COUNTER ENABLE - TIMS->tx_cnt += TIMS->tx_step / TIMx->PSC; + TIMS->tx_cnt += TIMS->tx_step / (TIMx->PSC + 1); TIMx->CNT = (uint32_t)TIMS->tx_cnt; } - -/** - * @brief Проверка на переполнение и дальнейшая его обработка. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция проверяет когда таймер переполниться и если надо, - вызывает соответствующее прерывание: - - call_IRQHandller() - */ +/* Проверка на переполнение и дальнейшая его обработка */ void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) { // Переполнение таймера: сброс таймера и вызов прерывания @@ -88,12 +57,11 @@ void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) TIMS->RELOAD = TIMx->ARR; // RELOAD ARR if (TIMS->tx_cnt > TIMx->ARR) // reset COUNTER - TIMS->tx_cnt = 0; + TIMS->tx_cnt -= TIMS->RELOAD+1; else if (TIMS->tx_cnt < 0) - TIMS->tx_cnt = TIMx->ARR; + TIMS->tx_cnt += TIMS->RELOAD+1; - if(TIMx->DIER & TIM_DIER_UIE) // if update interrupt enable - call_IRQHandller(TIMx); // call HANDLER + call_IRQHandller(TIMx); // call HANDLER } } } @@ -102,19 +70,7 @@ void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) //----------------------------CHANNELS-----------------------------// -/** - * @brief Симуляция каналов таймера. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция симулирует работу всех каналов таймера. - * Она вызывает функции: - * - CC_PWM_Ch1_Simulation() - * - CC_PWM_Ch2_Simulation() - * - CC_PWM_Ch3_Simulation() - * - CC_PWM_Ch4_Simulation() - * - Write_OC_to_GPIO() - * - Write_OC_to_TRGO() - */ +/* Симуляция каналов таймера */ void Channels_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) { CC_PWM_Ch1_Simulation(TIMx, TIMS); @@ -127,13 +83,7 @@ void Channels_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) Write_OC_to_TRGO(TIMx, TIMS); } //-----------------CAPTURE COPMARE & PWM FUNCTIONS------------------// -/** - * @brief Выбор режима первого канала и его симуляция. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция по регистрам таймера проверяет как настроен - первый канал и соответствующе симулирует его работу. - */ +/* Выбор режима CaptureCompare или PWM и симуляция для каждого канала */ void CC_PWM_Ch1_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) { // определяет режим канала switch (TIMx->CCMR1 & TIM_CCMR1_OC1M) @@ -175,13 +125,6 @@ switch (TIMx->CCMR1 & TIM_CCMR1_OC1M) } } -/** - * @brief Выбор режима второго канала и его симуляция. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция по регистрам таймера проверяет как настроен - второй канал и соответствующе симулирует его работу. - */ void CC_PWM_Ch2_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) { // определяет режим канала switch (TIMx->CCMR1 & TIM_CCMR1_OC2M) @@ -223,13 +166,6 @@ switch (TIMx->CCMR1 & TIM_CCMR1_OC2M) } } -/** - * @brief Выбор режима третьего канала и его симуляция. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция по регистрам таймера проверяет как настроен - третий канал и соответствующе симулирует его работу. - */ void CC_PWM_Ch3_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) { // определяет режим канала switch (TIMx->CCMR2 & TIM_CCMR1_OC1M) @@ -271,16 +207,9 @@ switch (TIMx->CCMR2 & TIM_CCMR1_OC1M) } } -/** - * @brief Выбор режима четвертого канала и его симуляция. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура таймера для симуляции. - * @details Данная функция по регистрам таймера проверяет как настроен - четвертый канал и соответствующе симулирует его работу. - */ void CC_PWM_Ch4_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) { // определяет режим канала -switch (TIMx->CCMR2 & TIM_CCMR1_OC2M) +switch (TIMx->CCMR1 & TIM_CCMR1_OC2M) { case ((TIM_OCMODE_ACTIVE) << (TIM_OCMODE_SECOND_SHIFT)): // ACTIVE mode if (abs(TIMx->CNT - TIMx->CCR4) < 2*TIMS->tx_step) @@ -319,14 +248,7 @@ switch (TIMx->CCMR2 & TIM_CCMR1_OC2M) } } - -/** - * @brief Запись каналов таймера в порты GPIO. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура того же таймера для симуляции. - * @details Данная функция записывает каналы OC в порты GPIO, определенные в TIMS. - * Запись происходит только если пин настроен на альтернативную функцию. - */ +/* Запись каналов таймера в порты GPIO */ void Write_OC_to_GPIO(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) { // write gpio pin if need @@ -400,13 +322,7 @@ void Write_OC_to_GPIO(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS) } } } -/** Запись результата compare в глабальную структуру с TRIGGER OUTPUT */ -/** - * @brief Запись каналов таймера в глабальную структуру с TRIGGER OUTPUT. - * @param TIMx – таймер, каналы которого надо записать. - * @param TIMS – структура того же таймера для симуляции. - * @details Данная функция считывает каналы OC и записывает их в внешний канал триггера TRGO. - */ +/* Запись результата compare в глабальную структуру с TRIGGER OUTPUT */ void Write_OC_to_TRGO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) { // write trigger output from OCxREF pin if need @@ -428,22 +344,38 @@ void Write_OC_to_TRGO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) temp_trgo = TIMS->Channels.OC4REF; } // select TIMx TRGO +#ifdef USE_TIM1 if (TIMx == TIM1) Slave_Channels.TIM1_TRGO = temp_trgo; +#endif +#ifdef USE_TIM2 else if (TIMx == TIM2) Slave_Channels.TIM2_TRGO = temp_trgo; +#endif +#ifdef USE_TIM3 else if (TIMx == TIM3) Slave_Channels.TIM3_TRGO = temp_trgo; +#endif +#ifdef USE_TIM4 else if (TIMx == TIM4) Slave_Channels.TIM4_TRGO = temp_trgo; +#endif +#ifdef USE_TIM5 else if (TIMx == TIM5) Slave_Channels.TIM5_TRGO = temp_trgo; +#endif +#ifdef USE_TIM6 else if (TIMx == TIM6) Slave_Channels.TIM6_TRGO = temp_trgo; +#endif +#ifdef USE_TIM7 else if (TIMx == TIM7) Slave_Channels.TIM7_TRGO = temp_trgo; +#endif +#ifdef USE_TIM8 else if (TIMx == TIM8) Slave_Channels.TIM8_TRGO = temp_trgo; +#endif temp_trgo = 0; } //------------------------------------------------------------------// @@ -452,17 +384,10 @@ void Write_OC_to_TRGO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) //--------------------MISC (temporary) FUNCTIONS--------------------// -/** Определение источника для запуска таймера в SLAVE MODE */ -/** - * @brief Определение источника для запуска таймера в SLAVE MODE. - * @param TIMx – таймер, который надо включить. - * @param TIMx – таймер, прерываний которого надо вызвать. - * @details Данная функция проверяет какой триггер выбран для запуска таймера, - * после записывает значение канала триггера в бит включения таймера. - * Таким образом, при лог.1 в канале триггера - таймер включиться. - */ -void Slave_Mode_Check_Source(TIM_TypeDef* TIMx) +/* Определение источника для запуска таймера в SLAVE MODE */ +void Slave_Mode_Check_Source(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS) { +#ifdef USE_TIM2 if (TIMx == TIM2) { if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR0) @@ -474,6 +399,8 @@ void Slave_Mode_Check_Source(TIM_TypeDef* TIMx) else if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR3) TIMx->CR1 |= (Slave_Channels.TIM8_TRGO << TIM_CR1_CEN_Pos); } +#endif +#ifdef USE_TIM3 else if (TIMx == TIM3) { if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR0) @@ -485,6 +412,8 @@ void Slave_Mode_Check_Source(TIM_TypeDef* TIMx) else if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR3) TIMx->CR1 |= (Slave_Channels.TIM3_TRGO << TIM_CR1_CEN_Pos); } +#endif +#ifdef USE_TIM4 else if (TIMx == TIM4) { if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR0) @@ -496,6 +425,8 @@ void Slave_Mode_Check_Source(TIM_TypeDef* TIMx) else if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR3) TIMx->CR1 |= (Slave_Channels.TIM4_TRGO << TIM_CR1_CEN_Pos); } +#endif +#ifdef USE_TIM5 else if (TIMx == TIM5) { if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR0) @@ -507,17 +438,13 @@ void Slave_Mode_Check_Source(TIM_TypeDef* TIMx) else if ((TIMx->SMCR & TIM_SMCR_TS) == TIM_TS_ITR3) TIMx->CR1 |= (Slave_Channels.TIM7_TRGO << TIM_CR1_CEN_Pos); } +#endif } //------------------------------------------------------------------// //------------------------SIMULINK FUNCTIONS------------------------// -/** Симулирование выбранных через дефайн таймеров */ -/** - * @brief Симуляция выбранных таймеров. - * @details Таймеры для симуляции выбираются через дефайны в stm32f4xx_matlab_conf.h. - Функция вызывается на каждом шаге симуляции. - */ +// Симулирование выбранных таймеров void Simulate_TIMs(void) { #ifdef USE_TIM1 @@ -563,11 +490,7 @@ void Simulate_TIMs(void) TIM_Simulation(TIM14, &tim14s); #endif } -/** - * @brief Деинициализирование выбранных таймеров. - * @details Таймеры для деинициализизации выбираются через дефайны в stm32f4xx_matlab_conf.h. - Функция вызывается в конце симуляции. - */ +// Деинициализирование выбранных таймеров (вызывается в конце симуляции) void TIM_SIM_DEINIT(void) { #ifdef USE_TIM1 @@ -619,74 +542,71 @@ void TIM_SIM_DEINIT(void) // Определение обработчиков, которые не используются // Т.к. в MSVC нет понятия weak function, необходимо объявить все колбеки // И если какой-то колбек не используется, его надо определить -#ifndef USE_TIM1_UP_TIM10_HANDLER -void TIM1_UP_TIM10_IRQHandler(void) {} -#endif -#ifndef USE_TIM2_HANDLER -void TIM2_IRQHandler(void) {} -#endif -#ifndef USE_TIM3_HANDLER -void TIM3_IRQHandler(void) {} -#endif -#ifndef USE_TIM4_HANDLER -void TIM4_IRQHandler(void) {} -#endif -#ifndef USE_TIM5_HANDLER -void TIM5_IRQHandler(void) {} -#endif -#ifndef USE_TIM6_HANDLER -void TIM6_DAC_IRQHandler(void) {} -#endif -#ifndef USE_TIM7_HANDLER -void TIM7_IRQHandler(void) {} -#endif -#ifndef USE_TIM8_UP_TIM13_HANDLER -void TIM8_UP_TIM13_IRQHandler(void) {} -#endif -#ifndef USE_TIM1_BRK_TIM9_HANDLER -void TIM1_BRK_TIM9_IRQHandler(void) {} -#endif -#ifndef USE_TIM1_TRG_COM_TIM11_HANDLER -void TIM1_TRG_COM_TIM11_IRQHandler(void) {} -#endif -#ifndef USE_TIM8_BRK_TIM12_HANDLER -void TIM8_BRK_TIM12_IRQHandler(void) {} -#endif -#ifndef USE_TIM8_TRG_COM_TIM14_HANDLER -void TIM8_TRG_COM_TIM14_IRQHandler(void) {} -#endif +//#ifndef USE_TIM1_UP_TIM10_HANDLER +//void TIM1_UP_TIM10_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM2_HANDLER +//void TIM2_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM3_HANDLER +//void TIM3_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM4_HANDLER +//void TIM4_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM5_HANDLER +//void TIM5_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM6_HANDLER +//void TIM6_DAC_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM7_HANDLER +//void TIM7_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM8_UP_TIM13_HANDLER +//void TIM8_UP_TIM13_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM1_BRK_TIM9_HANDLER +//void TIM1_BRK_TIM9_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM1_TRG_COM_TIM11_HANDLER +//void TIM1_TRG_COM_TIM11_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM8_BRK_TIM12_HANDLER +//void TIM8_BRK_TIM12_IRQHandler(void) {} +//#endif +//#ifndef USE_TIM8_TRG_COM_TIM14_HANDLER +//void TIM8_TRG_COM_TIM14_IRQHandler(void) {} +//#endif -/** - * @brief Вызов прерывания таймера TIMx. - * @param TIMx – таймер, прерываний которого надо вызвать. - * @details Данная функция симулирует аппаратный вызов прерывания - таймера по какому-либо событию. - */ +/* Вызов прерывания */ void call_IRQHandller(TIM_TypeDef* TIMx) { // calling HANDLER - if ((TIMx == TIM1) || (TIMx == TIM10)) - TIM1_UP_TIM10_IRQHandler(); - else if (TIMx == TIM2) - TIM2_IRQHandler(); - else if (TIMx == TIM3) - TIM3_IRQHandler(); - else if (TIMx == TIM4) - TIM4_IRQHandler(); - else if (TIMx == TIM5) - TIM5_IRQHandler(); - else if (TIMx == TIM6) - TIM6_DAC_IRQHandler(); - else if (TIMx == TIM7) - TIM7_IRQHandler(); - else if ((TIMx == TIM8) || (TIMx == TIM13)) - TIM8_UP_TIM13_IRQHandler(); - else if ((TIMx == TIM1) || (TIMx == TIM9)) - TIM1_BRK_TIM9_IRQHandler(); - else if ((TIMx == TIM1) || (TIMx == TIM11)) - TIM1_TRG_COM_TIM11_IRQHandler(); - else if ((TIMx == TIM8) || (TIMx == TIM12)) - TIM8_BRK_TIM12_IRQHandler(); - else if ((TIMx == TIM8) || (TIMx == TIM14)) - TIM8_TRG_COM_TIM14_IRQHandler(); + if (TIMx == TIM1) + TIM1_UP_IRQHandler(); + //if ((TIMx == TIM1) || (TIMx == TIM10)) + // TIM1_UP_TIM10_IRQHandler(); + //else if (TIMx == TIM2) + // TIM2_IRQHandler(); + //else if (TIMx == TIM3) + // TIM3_IRQHandler(); + //else if (TIMx == TIM4) + // TIM4_IRQHandler(); + //else if (TIMx == TIM5) + // TIM5_IRQHandler(); + //else if (TIMx == TIM6) + // TIM6_DAC_IRQHandler(); + //else if (TIMx == TIM7) + // TIM7_IRQHandler(); + //else if ((TIMx == TIM8) || (TIMx == TIM13)) + // TIM8_UP_TIM13_IRQHandler(); + //else if ((TIMx == TIM1) || (TIMx == TIM9)) + // TIM1_BRK_TIM9_IRQHandler(); + //else if ((TIMx == TIM1) || (TIMx == TIM11)) + // TIM1_TRG_COM_TIM11_IRQHandler(); + //else if ((TIMx == TIM8) || (TIMx == TIM12)) + // TIM8_BRK_TIM12_IRQHandler(); + //else if ((TIMx == TIM8) || (TIMx == TIM14)) + // TIM8_TRG_COM_TIM14_IRQHandler(); } //------------------------------------------------------------------// diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.h b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.h new file mode 100644 index 0000000..889491e --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_matlab_tim.h @@ -0,0 +1,123 @@ +/************************************************************************** + STM32F407xx. + +**************************************************************************/ +#ifndef _MATLAB_TIM_H_ +#define _MATLAB_TIM_H_ + +#include "stm32f1xx_it.h" +#include "mcu_wrapper_conf.h" + + + +/////////////////////////////---DEFINES---///////////////////////////// +/* CCMRx */ +#define TIM_OCMODE_SECOND_SHIFT TIM_CCMR1_OC2M_Pos - TIM_CCMR1_OC1M_Pos + +///* GPIO ( GPIO ) */ +//#define READ_GPIO_CRL_CNF(_reg_, _pos_) ((_pos_ < 8)? \ +// ((((_reg_->CRL) & (GPIO_CRL_CNF0 << (_pos_ << 2u))) >> ( _pos_ << 2u)) >> 2): \ +// ((((_reg_->CRH) & (GPIO_CRL_CNF0 << ((_pos_ - 8) << 2u))) >> ((_pos_ - 8) << 2u)) >> 2) ) + +#define Check_OC1_GPIO_Output(_tims_) (GPIO_MODE_AF_PP == GET_GPIO_CONF(_tims_->Channels.OC1_GPIOx, _tims_->Channels.OC1_PIN_SHIFT)) +#define Check_OC2_GPIO_Output(_tims_) (GPIO_MODE_AF_PP == GET_GPIO_CONF(_tims_->Channels.OC2_GPIOx, _tims_->Channels.OC2_PIN_SHIFT)) +#define Check_OC3_GPIO_Output(_tims_) (GPIO_MODE_AF_PP == GET_GPIO_CONF(_tims_->Channels.OC3_GPIOx, _tims_->Channels.OC3_PIN_SHIFT)) +#define Check_OC4_GPIO_Output(_tims_) (GPIO_MODE_AF_PP == GET_GPIO_CONF(_tims_->Channels.OC4_GPIOx, _tims_->Channels.OC4_PIN_SHIFT)) + +///////////////////////////////////////////////////////////////////// + + + +///////////////////////////---STRUCTURES---////////////////////////// +/* */ +struct SlaveChannels +{ + unsigned TIM1_TRGO : 1; + unsigned TIM2_TRGO : 1; + unsigned TIM3_TRGO : 1; + unsigned TIM4_TRGO : 1; + unsigned TIM5_TRGO : 1; + unsigned TIM6_TRGO : 1; + unsigned TIM7_TRGO : 1; + unsigned TIM8_TRGO : 1; + +}; + +/* */ +struct Channels_Sim +{ + // GPIO + GPIO_TypeDef *OC1_GPIOx; + uint32_t OC1_PIN_SHIFT; + + GPIO_TypeDef *OC2_GPIOx; + uint32_t OC2_PIN_SHIFT; + + GPIO_TypeDef *OC3_GPIOx; + uint32_t OC3_PIN_SHIFT; + + GPIO_TypeDef *OC4_GPIOx; + uint32_t OC4_PIN_SHIFT; + + // + unsigned OC1REF:1; + unsigned OC2REF:1; + unsigned OC3REF:1; + unsigned OC4REF:1; +}; + +/* */ +struct TIM_Sim +{ + double tx_cnt; // + double tx_step; // + int RELOAD; // , PRELOAD = 1 + struct Channels_Sim Channels; // +}; +///////////////////////////////////////////////////////////////////// + + + +///////////////////////////---FUNCTIONS---/////////////////////////// + +//----------------------TIMER BASE FUNCTIONS-----------------------// +/* : */ +void TIM_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS); +/* */ +void TIMx_Count(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +/* */ +void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +/* */ +void call_IRQHandller(TIM_TypeDef *TIMx); +//-----------------------------------------------------------------// + + +//------------------------CHANNELS FUNCTIONS-----------------------// +/* */ +void Channels_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS); +/*---------------- - CAPTURE COPMARE & PWM FUNCTIONS------------------*/ +/* CaptureCompare PWM */ +void CC_PWM_Ch1_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +void CC_PWM_Ch2_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +void CC_PWM_Ch3_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +void CC_PWM_Ch4_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +/* GPIO */ +void Write_OC_to_GPIO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +/* compare TRIGGER OUTPUT */ +void Write_OC_to_TRGO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +//------------------------------------------------------------------// + + +//--------------------MISC (temporary) FUNCTIONS--------------------// +/* SLAVE MODE */ +void Slave_Mode_Check_Source(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); +//------------------------------------------------------------------// + + +//------------------------SIMULINK FUNCTIONS------------------------// +// +void Simulate_TIMs(void); +// ( ) +void TIM_SIM_DEINIT(void); +//------------------------------------------------------------------// +#endif // _MATLAB_TIM_H_ diff --git a/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_periph_registers.c b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_periph_registers.c new file mode 100644 index 0000000..3edbdc8 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_SIMULINK/stm32f1xx_periph_registers.c @@ -0,0 +1,47 @@ +/************************************************************************** +Данный файл необходим для объявления структур для отображения их в watch +В оригинальном stm32f407xx они объявлены дефайнами, которые не видны в watch. +Поэтому дополнительно объявлены данные структуры. +Называются также, как CMSISные, только в нижнем регистре + +**************************************************************************/ +#include "stm32f1xx.h" + + + +TIM_TypeDef* tim2 = TIM2; +TIM_TypeDef* tim3 = TIM3; +TIM_TypeDef* tim4 = TIM4; +RTC_TypeDef* rtc = RTC; +WWDG_TypeDef* wwdg = WWDG; +IWDG_TypeDef* iwdg = IWDG; +SPI_TypeDef* spi2 = SPI2; +USART_TypeDef* usart2 = USART2; +USART_TypeDef* usart3 = USART3; +I2C_TypeDef* i2c1 = I2C1; +I2C_TypeDef* i2c2 = I2C2; +CAN_TypeDef* can1 = CAN1; +PWR_TypeDef* pwr = PWR; +TIM_TypeDef* tim1 = TIM1; +USART_TypeDef* usart1 = USART1; +ADC_TypeDef* adc1 = ADC1; +ADC_TypeDef* adc2 = ADC2; +SPI_TypeDef* spi1 = SPI1; +EXTI_TypeDef* exti = EXTI; +GPIO_TypeDef* gpioa = GPIOA; +GPIO_TypeDef* gpiob = GPIOB; +GPIO_TypeDef* gpioc = GPIOC; +GPIO_TypeDef* gpiod = GPIOD; +GPIO_TypeDef* gpioe = GPIOE; +CRC_TypeDef* crc = CRC; +RCC_TypeDef* rcc = RCC; +FLASH_TypeDef* flash_r = FLASH; +DMA_TypeDef* dma1 = DMA1; +DMA_Channel_TypeDef* dma1_channel1 = DMA1_Channel1; +DMA_Channel_TypeDef* dma1_channel2 = DMA1_Channel2; +DMA_Channel_TypeDef* dma1_channel3 = DMA1_Channel3; +DMA_Channel_TypeDef* dma1_channel4 = DMA1_Channel4; +DMA_Channel_TypeDef* dma1_channel5 = DMA1_Channel5; +DMA_Channel_TypeDef* dma1_channel6 = DMA1_Channel6; +DMA_Channel_TypeDef* dma1_channel7 = DMA1_Channel7; +DBGMCU_TypeDef* dbgmcu = DBGMCU; \ No newline at end of file diff --git a/MCU_STM32F1xx_Matlab/stm32_defs.h b/MCU_STM32F1xx_Matlab/stm32_defs.h new file mode 100644 index 0000000..d175db5 --- /dev/null +++ b/MCU_STM32F1xx_Matlab/stm32_defs.h @@ -0,0 +1,6 @@ +#ifndef _USER_DEFS_ +#define _USER_DEFS_ + +#define GET_BITS_FROM_REG(_reg_, _mask_, _mask_pos_) ( ((_reg_) & (_mask_)) >> (_mask_pos_)) + +#endif // _USER_DEFS_ \ No newline at end of file diff --git a/MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.c b/MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.c new file mode 100644 index 0000000..2eeeb2f --- /dev/null +++ b/MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.c @@ -0,0 +1,166 @@ +/************************************************************************** + , + stm32f4xx_matlab_conf.h. + +**************************************************************************/ +#include "mcu_wrapper_conf.h" + +MCU_MemoryTypeDef MCU_MEM; +MCU_CortexMemoryTypeDef MCU_CORTEX_MEM; + +//-----------------------------------------------------------------------// +/*------------------------------FUNCTIONS--------------------------------*/ +// MCU PERIPH INIT +void Initialize_Periph_Sim(void) +{ + Init_TIM_SIM(); +} +// MCU PERIPH DEINIT +void deInitialize_Periph_Sim(void) +{ + TIM_SIM_DEINIT(); +} +// MCU DEINIT +void deInitialize_MCU(void) +{ + // , + memset(&hmcu, 0, sizeof(hmcu)); + // , + memset(&MCU_MEM, 0, sizeof(MCU_MEM)); + memset(&MCU_CORTEX_MEM, 0, sizeof(MCU_CORTEX_MEM)); +} + + +/*------------------------------FUNCTIONS--------------------------------*/ +//-----------------------------------------------------------------------// + +//-----------------------------------------------------------------------// +/*-------------------------------TIMERS----------------------------------*/ +// defines structure for simulate +#ifdef USE_TIM1 +struct TIM_Sim tim1s; +#endif +#ifdef USE_TIM2 +struct TIM_Sim tim2s; +#endif +#ifdef USE_TIM3 +struct TIM_Sim tim3s; +#endif +#ifdef USE_TIM4 +struct TIM_Sim tim4s; +#endif +#ifdef USE_TIM5 +struct TIM_Sim tim5s; +#endif +#ifdef USE_TIM6 +struct TIM_Sim tim6s; +#endif +#ifdef USE_TIM7 +struct TIM_Sim tim7s; +#endif +#ifdef USE_TIM8 +struct TIM_Sim tim8s; +#endif +#ifdef USE_TIM9 +struct TIM_Sim tim9s; +#endif +#ifdef USE_TIM10 +struct TIM_Sim tim10s; +#endif +#ifdef USE_TIM11 +struct TIM_Sim tim11s; +#endif +#ifdef USE_TIM12 +struct TIM_Sim tim12s; +#endif +#ifdef USE_TIM13 +struct TIM_Sim tim13s; +#endif +#ifdef USE_TIM14 +struct TIM_Sim tim14s; +#endif + +// defines function for filling structure for simulate +void Init_TIM_SIM(void) +{ +#ifdef USE_TIM1 + tim1s.tx_cnt = TIM1->CNT; + tim1s.tx_step = SIM_Sample_Time * ABP2_TIMS_Value; + + tim1s.Channels.OC1_GPIOx = GPIOA; + tim1s.Channels.OC1_PIN_SHIFT = 8; + tim1s.Channels.OC2_GPIOx = GPIOE; + tim1s.Channels.OC2_PIN_SHIFT = 11; + tim1s.Channels.OC3_GPIOx = GPIOE; + tim1s.Channels.OC3_PIN_SHIFT = 13; + tim1s.Channels.OC4_GPIOx = GPIOE; + tim1s.Channels.OC4_PIN_SHIFT = 14; +#endif +#ifdef USE_TIM2 + tim2s.tx_cnt = TIM2->CNT; + tim2s.tx_step = SIM_Sample_Time * ABP1_TIMS_Value; + + tim2s.Channels.OC1_GPIOx = GPIOA; + tim2s.Channels.OC1_PIN_SHIFT = 5; + tim2s.Channels.OC2_GPIOx = GPIOA; + tim2s.Channels.OC2_PIN_SHIFT = 1; + tim2s.Channels.OC3_GPIOx = GPIOA; + tim2s.Channels.OC3_PIN_SHIFT = 2; + tim2s.Channels.OC4_GPIOx = GPIOA; + tim2s.Channels.OC4_PIN_SHIFT = 3; +#endif +#ifdef USE_TIM3 + tim3s.tx_cnt = TIM3->CNT; + tim3s.tx_step = SIM_Sample_Time * ABP1_TIMS_Value; + + tim3s.Channels.OC1_GPIOx = GPIOB; + tim3s.Channels.OC1_PIN_SHIFT = 4; + tim3s.Channels.OC2_GPIOx = GPIOA; + tim3s.Channels.OC2_PIN_SHIFT = 7; + tim3s.Channels.OC3_GPIOx = GPIOB; + tim3s.Channels.OC3_PIN_SHIFT = 0; + tim3s.Channels.OC4_GPIOx = GPIOB; + tim3s.Channels.OC4_PIN_SHIFT = 1; +#endif +#ifdef USE_TIM4 + tim4s.tx_cnt = TIM4->CNT; + tim4s.tx_step = SIM_Sample_Time * ABP1_TIMS_Value; + + tim4s.Channels.OC1_GPIOx = GPIOD; + tim4s.Channels.OC1_PIN_SHIFT = 12; + tim4s.Channels.OC2_GPIOx = GPIOB; + tim4s.Channels.OC2_PIN_SHIFT = 7; + tim4s.Channels.OC3_GPIOx = GPIOB; + tim4s.Channels.OC3_PIN_SHIFT = 8; + tim4s.Channels.OC4_GPIOx = GPIOB; + tim4s.Channels.OC4_PIN_SHIFT = 9; +#endif +#ifdef USE_TIM5 + tim5s.tx_cnt = TIM5->CNT; + tim5s.tx_step = SIM_Sample_Time * ABP1_TIMS_Value; + + tim5s.Channels.OC1_GPIOx = GPIOA; + tim5s.Channels.OC1_PIN_SHIFT = 0; + tim5s.Channels.OC2_GPIOx = GPIOA; + tim5s.Channels.OC2_PIN_SHIFT = 1; + tim5s.Channels.OC3_GPIOx = GPIOA; + tim5s.Channels.OC3_PIN_SHIFT = 2; + tim5s.Channels.OC4_GPIOx = GPIOA; + tim5s.Channels.OC4_PIN_SHIFT = 3; +#endif +#ifdef USE_TIMx + tim6s.tx_cnt = TIMx->CNT; + tim6s.tx_step = SIM_Sample_Time * ABP1_TIMS_Value; + + tim6s.Channels.OC1_GPIOx = GPIOA; + tim6s.Channels.OC1_PIN_SHIFT = 0; + tim6s.Channels.OC2_GPIOx = GPIOA; + tim6s.Channels.OC2_PIN_SHIFT = 0; + tim6s.Channels.OC3_GPIOx = GPIOA; + tim6s.Channels.OC3_PIN_SHIFT = 0; + tim6s.Channels.OC4_GPIOx = GPIOA; + tim6s.Channels.OC4_PIN_SHIFT = 0; +#endif +} +/*-------------------------------TIMERS----------------------------------*/ +//-----------------------------------------------------------------------// diff --git a/MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.h b/MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.h new file mode 100644 index 0000000..b92d5dd --- /dev/null +++ b/MCU_STM32F1xx_Matlab/stm32f1xx_matlab_conf.h @@ -0,0 +1,114 @@ +/************************************************************************** + , +. + +**************************************************************************/ +#ifndef _MATLAB_SETUP_H_ +#define _MATLAB_SETUP_H_ +#include "stm32_defs.h" +#include "stm32f1xx_hal.h" +//#include "mcu_wrapper_conf.h" + +// DEFINES (UNCOMMENT WHAT YOU WILL SIMULATE) +// TIMS +#define USE_TIM1 +#define USE_TIM2 +#define USE_TIM3 +//#define USE_TIM4 +//#define USE_TIM5 +//#define USE_TIM6 +//#define USE_TIM7 +//#define USE_TIM8 +//#define USE_TIM9 +//#define USE_TIM10 +//#define USE_TIM11 +//#define USE_TIM12 +//#define USE_TIM13 +//#define USE_TIM14 + +// TIM'S HANDLERS +//#define USE_TIM1_UP_TIM10_HANDLER +//#define USE_TIM2_HANDLER +//#define USE_TIM3_HANDLER +//#define USE_TIM4_HANDLER +//#define USE_TIM5_HANDLER +//#define USE_TIM6_HANDLER +//#define USE_TIM7_HANDLER +//#define USE_TIM8_UP_TIM13_HANDLER +//#define USE_TIM1_BRK_TIM9_HANDLER +//#define USE_TIM1_TRG_COM_TIM11_HANDLER +//#define USE_TIM8_BRK_TIM12_HANDLER +//#define USE_TIM8_TRG_COM_TIM14_HANDLER + + + + + + +//-----------------------------------------------------------------------// +/*------------------------------FUNCTIONS--------------------------------*/ +void deInitialize_Periph_Sim(void); +void deInitialize_MCU(void); +void Initialize_Periph_Sim(void); + + +#include "stm32f1xx_matlab_rcc.h" +#include "stm32f1xx_matlab_gpio.h" + + +//-----------------------------------------------------------------------// +/*-------------------------------TIMERS----------------------------------*/ +//#if defined(USE_TIM1) || defined(USE_TIM2) || defined(USE_TIM3) || defined(USE_TIM4) || defined(USE_TIM5) || \ +// defined(USE_TIM6) || defined(USE_TIM7) || defined(USE_TIM8) || defined(USE_TIM9) || defined(USE_TIM10) || \ +// defined(USE_TIM11) || defined(USE_TIM12) || defined(USE_TIM13) || defined(USE_TIM14) +#include "stm32f1xx_matlab_tim.h" + +// CODE +void Init_TIM_SIM(void); + +#ifdef USE_TIM1 +extern struct TIM_Sim tim1s; +#endif +#ifdef USE_TIM2 +extern struct TIM_Sim tim2s; +#endif +#ifdef USE_TIM3 +extern struct TIM_Sim tim3s; +#endif +#ifdef USE_TIM4 +extern struct TIM_Sim tim4s; +#endif +#ifdef USE_TIM5 +extern struct TIM_Sim tim5s; +#endif +#ifdef USE_TIM6 +extern struct TIM_Sim tim6s; +#endif +#ifdef USE_TIM7 +extern struct TIM_Sim tim7s; +#endif +#ifdef USE_TIM8 +extern struct TIM_Sim tim8s; +#endif +#ifdef USE_TIM9 +extern struct TIM_Sim tim9s; +#endif +#ifdef USE_TIM10 +extern struct TIM_Sim tim10s; +#endif +#ifdef USE_TIM11 +extern struct TIM_Sim tim11s; +#endif +#ifdef USE_TIM12 +extern struct TIM_Sim tim12s; +#endif +#ifdef USE_TIM13 +extern struct TIM_Sim tim13s; +#endif +#ifdef USE_TIM14 +extern struct TIM_Sim tim14s; +#endif +/*-------------------------------TIMERS----------------------------------*/ +//-----------------------------------------------------------------------// + +#endif // _MATLAB_SETUP_H_ diff --git a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/arm_defines.h b/MCU_STM32F4xx_Matlab/Drivers/CMSIS/arm_defines.h deleted file mode 100644 index 008e633..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/arm_defines.h +++ /dev/null @@ -1,291 +0,0 @@ -/** -************************************************************************** -* @file arm_defines.h -* @brief ARM . -************************************************************************** -@details - ARM , -MSVC. - ARM . -**************************************************************************/ - -#define __disable_irq() - -/* CMSIS compiler specific defines */ - - -#ifndef __ASM - #define __ASM __asm -#endif - -#ifndef __inline - #define __inline inline -#endif -#ifndef __INLINE - #define __INLINE __inline -#endif - -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static __inline -#endif - -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE static __forceinline -#endif - -#ifndef __NO_RETURN - #define __NO_RETURN __declspec(noreturn) -#endif - -#ifndef __USED - #define __USED __attribute__((used)) -#endif - -#ifndef __WEAK - #define __WEAK __declspec(selectany) -#endif -#ifndef __weak -#define __weak -#endif - - -#ifndef __PACKED - #define __PACKED __attribute__((packed)) -#endif - -#ifndef __PACKED_STRUCT - #define __PACKED_STRUCT __packed struct -#endif - -#ifndef __PACKED_UNION - #define __PACKED_UNION __packed union -#endif - -#ifndef __UNALIGNED_UINT32 /* deprecated */ - #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) -#endif - -#ifndef __UNALIGNED_UINT16_WRITE - #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) -#endif - -#ifndef __UNALIGNED_UINT16_READ - #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) -#endif - -#ifndef __UNALIGNED_UINT32_WRITE - #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) -#endif - -#ifndef __UNALIGNED_UINT32_READ - #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) -#endif - -#ifndef __ALIGNED - #define __ALIGNED(x) __attribute__((aligned(x))) -#endif - -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - -/* ########################## Core Instruction Access ######################### */ -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP() - /** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI() - - /** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE() - - /** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV() - - /** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -#define __ISB() - - /** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() - - - /** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() - - - /** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV(value) value - - - /** - \brief Reverse byte order (16 bit) - \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV16(value) value - - - /** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REVSH(value) value - - - /** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -#define __ROR() - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) value - - - /** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -#define __RBIT() _byteswap_ulong(_rotr(value, 16)) - - /** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ() __lzcnt(value) - - - /** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDREXB(ptr) (*(volatile uint8_t *)(ptr)) - - - /** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDREXH(ptr) (*(volatile uint16_t *)(ptr)) - - - /** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDREXW(ptr) (*(volatile uint32_t *)(ptr)) - - - /** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXB(value, ptr) (*(volatile uint8_t *)(ptr) = (value), 0) - - - /** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXH(value, ptr) (*(volatile uint16_t *)(ptr) = (value), 0) - - - /** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXW(value, ptr) (*(volatile uint32_t *)(ptr) = (value), 0) - - - /** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -#define __CLREX - - - - /** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT - - - /** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT - diff --git a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/stm32f407xx_matlab.h b/MCU_STM32F4xx_Matlab/Drivers/CMSIS/stm32f407xx_matlab.h deleted file mode 100644 index 9130124..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/CMSIS/stm32f407xx_matlab.h +++ /dev/null @@ -1,15585 +0,0 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab.h -* @brief Заголовочный файл для работы с STM32F4xx в MATLAB. -************************************************************************** -@details -Данный файл является копией stm32f407xx.h с некоторыми изменениями: -- добавлен кейловский stdint.h (через "", вместо <>) (~170) -- добавлен cmsis_armcc_matlab.h с дефайнами из оригинального cmsis_armcc.h (~170) -- добавлен core_cm4.h с дефайнами из оригинального core_cm4.h (~170) -- добавлена структура имитирующая память МК (для работы дефайнов адресов регистров) (~950) - (надо допилить) - -Необходимо допилить поддержку всех дефайнов, которые объявляются в -arm_acle.h, arm_compat.h, cmsis_armclang.h, cmsis_compiler.h, cmsis_version.h, -core_cm4.h, mpu_armv7.h, stddef -**************************************************************************/ - -/** @addtogroup CMSIS_Device - * @{ - */ - -/** @addtogroup stm32f407xx - * @{ - */ - -#ifndef __STM32F407xx_H -#define __STM32F407xx_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001U /*!< Core revision r0p1 */ -#define __MPU_PRESENT 1U /*!< STM32F4XX provides an MPU */ -#define __NVIC_PRIO_BITS 4U /*!< STM32F4XX uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ -#define __FPU_PRESENT 1U /*!< FPU present */ - -/** - * @} - */ - -/** @addtogroup Peripheral_interrupt_number_definition - * @{ - */ - -/** - * @brief STM32F4XX Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum -{ -/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ -/****** STM32 specific Interrupt Numbers **********************************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ - RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ - DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ - DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ - DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ - DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ - DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ - DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ - ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ - CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ - CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ - TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ - TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ - TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare global interrupt */ - DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ - FSMC_IRQn = 48, /*!< FSMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ - TIM7_IRQn = 55, /*!< TIM7 global interrupt */ - DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ - DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ - DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ - DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ - DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ - DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ - DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ - OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ - OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ - OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ - DCMI_IRQn = 78, /*!< DCMI global interrupt */ - RNG_IRQn = 80, /*!< RNG global Interrupt */ - FPU_IRQn = 81 /*!< FPU global interrupt */ -} IRQn_Type; -/* Legacy define */ -#define HASH_RNG_IRQn RNG_IRQn - -/** - * @} - */ - -#include "stdint.h" -#include "arm_defines.h" -#include "core_cm4_matlab.h" /* Cortex-M4 processor and core peripherals */ -#include "system_stm32f4xx.h" - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ - __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ - __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ - __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ - __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ - __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ - __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ - __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ - __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ - __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ - __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ - __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ - __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ - __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ - __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ - __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ - __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ - __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ - __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ - __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ - __IO uint32_t CDR; /*!< ADC common regular data register for dual - AND triple modes, Address offset: ADC1 base address + 0x308 */ -} ADC_Common_TypeDef; - - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ - __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ - __IO uint32_t TDLR; /*!< CAN mailbox data low register */ - __IO uint32_t TDHR; /*!< CAN mailbox data high register */ -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ - __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ - __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ - __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ - __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ - __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ - __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ - __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ - __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ - __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ - __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ - __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ - uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ - CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ - uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ - __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ - __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ - uint32_t RESERVED2; /*!< Reserved, 0x208 */ - __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ - uint32_t RESERVED3; /*!< Reserved, 0x210 */ - __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ - uint32_t RESERVED4; /*!< Reserved, 0x218 */ - __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ - uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ - CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ -} CAN_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ - __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ - uint8_t RESERVED0; /*!< Reserved, 0x05 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ - __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ - __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ - __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ - __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ - __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ - __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ - __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ - __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ - __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ - __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ - __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ - __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ - __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ -} DAC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ - __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ - __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ - __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ -}DBGMCU_TypeDef; - -/** - * @brief DCMI - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ - __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ - __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ - __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ - __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ - __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ - __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ - __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ - __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ - __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ - __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ -} DCMI_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DMA stream x configuration register */ - __IO uint32_t NDTR; /*!< DMA stream x number of data register */ - __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ - __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ - __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ - __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ -} DMA_Stream_TypeDef; - -typedef struct -{ - __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ - __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ - __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ - __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ -} DMA_TypeDef; - -/** - * @brief Ethernet MAC - */ - -typedef struct -{ - __IO uint32_t MACCR; - __IO uint32_t MACFFR; - __IO uint32_t MACHTHR; - __IO uint32_t MACHTLR; - __IO uint32_t MACMIIAR; - __IO uint32_t MACMIIDR; - __IO uint32_t MACFCR; - __IO uint32_t MACVLANTR; /* 8 */ - uint32_t RESERVED0[2]; - __IO uint32_t MACRWUFFR; /* 11 */ - __IO uint32_t MACPMTCSR; - uint32_t RESERVED1; - __IO uint32_t MACDBGR; - __IO uint32_t MACSR; /* 15 */ - __IO uint32_t MACIMR; - __IO uint32_t MACA0HR; - __IO uint32_t MACA0LR; - __IO uint32_t MACA1HR; - __IO uint32_t MACA1LR; - __IO uint32_t MACA2HR; - __IO uint32_t MACA2LR; - __IO uint32_t MACA3HR; - __IO uint32_t MACA3LR; /* 24 */ - uint32_t RESERVED2[40]; - __IO uint32_t MMCCR; /* 65 */ - __IO uint32_t MMCRIR; - __IO uint32_t MMCTIR; - __IO uint32_t MMCRIMR; - __IO uint32_t MMCTIMR; /* 69 */ - uint32_t RESERVED3[14]; - __IO uint32_t MMCTGFSCCR; /* 84 */ - __IO uint32_t MMCTGFMSCCR; - uint32_t RESERVED4[5]; - __IO uint32_t MMCTGFCR; - uint32_t RESERVED5[10]; - __IO uint32_t MMCRFCECR; - __IO uint32_t MMCRFAECR; - uint32_t RESERVED6[10]; - __IO uint32_t MMCRGUFCR; - uint32_t RESERVED7[334]; - __IO uint32_t PTPTSCR; - __IO uint32_t PTPSSIR; - __IO uint32_t PTPTSHR; - __IO uint32_t PTPTSLR; - __IO uint32_t PTPTSHUR; - __IO uint32_t PTPTSLUR; - __IO uint32_t PTPTSAR; - __IO uint32_t PTPTTHR; - __IO uint32_t PTPTTLR; - __IO uint32_t RESERVED8; - __IO uint32_t PTPTSSR; - uint32_t RESERVED9[565]; - __IO uint32_t DMABMR; - __IO uint32_t DMATPDR; - __IO uint32_t DMARPDR; - __IO uint32_t DMARDLAR; - __IO uint32_t DMATDLAR; - __IO uint32_t DMASR; - __IO uint32_t DMAOMR; - __IO uint32_t DMAIER; - __IO uint32_t DMAMFBOCR; - __IO uint32_t DMARSWTR; - uint32_t RESERVED10[8]; - __IO uint32_t DMACHTDR; - __IO uint32_t DMACHRDR; - __IO uint32_t DMACHTBAR; - __IO uint32_t DMACHRBAR; -} ETH_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ - __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ - __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ - __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ - __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ - __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ - __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ - __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ - __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ - __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */ -} FLASH_TypeDef; - - - -/** - * @brief Flexible Static Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ -} FSMC_Bank1_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ -} FSMC_Bank1E_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank2 - */ - -typedef struct -{ - __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ - __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ - __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ - __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ - uint32_t RESERVED0; /*!< Reserved, 0x70 */ - __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ - uint32_t RESERVED1; /*!< Reserved, 0x78 */ - uint32_t RESERVED2; /*!< Reserved, 0x7C */ - __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ - __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ - __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ - __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ - uint32_t RESERVED3; /*!< Reserved, 0x90 */ - __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ -} FSMC_Bank2_3_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank4 - */ - -typedef struct -{ - __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ - __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ - __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ - __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ - __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ -} FSMC_Bank4_TypeDef; - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ - __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ - __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ - __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ - __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ - __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ - __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ - __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ - __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ -} GPIO_TypeDef; - -/** - * @brief System configuration controller - */ - -typedef struct -{ - __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ - __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ - __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ - uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ - __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ -} SYSCFG_TypeDef; - -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ - __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ - __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ - __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */ - __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ - __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ - __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ - __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ - __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ - __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ -} IWDG_TypeDef; - - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ - __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ - __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ - __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ - __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ - __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ - __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ - __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ - uint32_t RESERVED0; /*!< Reserved, 0x1C */ - __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ - __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ - uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ - __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ - __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ - __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ - uint32_t RESERVED2; /*!< Reserved, 0x3C */ - __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ - __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ - uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ - __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ - __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ - __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ - uint32_t RESERVED4; /*!< Reserved, 0x5C */ - __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ - __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ - uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ - __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ - __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ - uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ - __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ - __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ - __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ - __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ - __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ - __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ - __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ - __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ - __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ - __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ - __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ - __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ - __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ - __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ - __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ - __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ - __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */ - __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */ - uint32_t RESERVED7; /*!< Reserved, 0x4C */ - __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */ - __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ - __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ - __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ - __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ - __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ - __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ - __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ - __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ - __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ - __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ - __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ - __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ - __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ - __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ - __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ - __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ - __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ - __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ - __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ -} RTC_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */ - __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */ - __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */ - __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */ - __IO const uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */ - __IO const uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */ - __IO const uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */ - __IO const uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */ - __IO const uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */ - __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */ - __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */ - __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */ - __IO const uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */ - __IO const uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */ - __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */ - __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */ - uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ - __IO const uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */ - uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ - __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */ -} SDIO_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ - __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ - __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ - __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ - __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ - __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ - __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ - __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ - __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ -} SPI_TypeDef; - - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ - __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ - __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ - __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ - __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ - __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ - __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ - __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ - __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ - __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ - __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ -} TIM_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ - __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ - __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ - __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ - __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ - __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ -} USART_TypeDef; - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ - __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ -} WWDG_TypeDef; - -/** - * @brief RNG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ - __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ -} RNG_TypeDef; - -/** - * @brief USB_OTG_Core_Registers - */ -typedef struct -{ - __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ - __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ - __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ - __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ - __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ - __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ - __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ - __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ - __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ - __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ - __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ - __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ - uint32_t Reserved30[2]; /*!< Reserved 030h */ - __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ - __IO uint32_t CID; /*!< User ID Register 03Ch */ - uint32_t Reserved40[48]; /*!< Reserved 0x40-0xFF */ - __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ - __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ -} USB_OTG_GlobalTypeDef; - -/** - * @brief USB_OTG_device_Registers - */ -typedef struct -{ - __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ - __IO uint32_t DCTL; /*!< dev Control Register 804h */ - __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ - uint32_t Reserved0C; /*!< Reserved 80Ch */ - __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ - __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ - __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ - __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ - uint32_t Reserved20; /*!< Reserved 820h */ - uint32_t Reserved9; /*!< Reserved 824h */ - __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ - __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ - __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ - __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ - __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ - __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ - uint32_t Reserved40; /*!< dedicated EP mask 840h */ - __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ - uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ - __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ -} USB_OTG_DeviceTypeDef; - -/** - * @brief USB_OTG_IN_Endpoint-Specific_Register - */ -typedef struct -{ - __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ - uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ - __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ - uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ - __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ - __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ - __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ - uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ -} USB_OTG_INEndpointTypeDef; - -/** - * @brief USB_OTG_OUT_Endpoint-Specific_Registers - */ -typedef struct -{ - __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ - uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ - __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ - uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ - __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ - __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ - uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ -} USB_OTG_OUTEndpointTypeDef; - -/** - * @brief USB_OTG_Host_Mode_Register_Structures - */ -typedef struct -{ - __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ - __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ - __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ - uint32_t Reserved40C; /*!< Reserved 40Ch */ - __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ - __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ - __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ -} USB_OTG_HostTypeDef; - -/** - * @brief USB_OTG_Host_Channel_Specific_Registers - */ -typedef struct -{ - __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ - __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ - __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ - __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ - __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ - __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ - uint32_t Reserved[2]; /*!< Reserved */ -} USB_OTG_HostChannelTypeDef; - -/** - * @} - */ - - /** @addtogroup Peripheral_memory_map - * @{ - */ - - /* Legacy defines */ -#define SRAM_BASE SRAM1_BASE -#define SRAM_BB_BASE SRAM1_BB_BASE - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) -#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) -#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000UL) - -/*!< APB1 peripherals */ -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) -#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL) -#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL) -#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL) -#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400UL) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) -#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000UL) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) -#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL) - -/*!< APB2 peripherals */ -#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL) -#define TIM8_BASE (APB2PERIPH_BASE + 0x0400UL) -#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL) -#define USART6_BASE (APB2PERIPH_BASE + 0x1400UL) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2000UL) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2100UL) -#define ADC3_BASE (APB2PERIPH_BASE + 0x2200UL) -#define ADC123_COMMON_BASE (APB2PERIPH_BASE + 0x2300UL) -/* Legacy define */ -#define ADC_BASE ADC123_COMMON_BASE -#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00UL) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) -#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800UL) -#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00UL) -#define TIM9_BASE (APB2PERIPH_BASE + 0x4000UL) -#define TIM10_BASE (APB2PERIPH_BASE + 0x4400UL) -#define TIM11_BASE (APB2PERIPH_BASE + 0x4800UL) - -/*!< AHB1 peripherals */ -#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000UL) -#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400UL) -#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800UL) -#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00UL) -#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000UL) -#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400UL) -#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800UL) -#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00UL) -#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000UL) -#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL) -#define RCC_BASE (AHB1PERIPH_BASE + 0x3800UL) -#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00UL) -#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000UL) -#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL) -#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL) -#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL) -#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL) -#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL) -#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL) -#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL) -#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL) -#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400UL) -#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL) -#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL) -#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL) -#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL) -#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL) -#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL) -#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL) -#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL) -#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL) -#define ETH_MAC_BASE (ETH_BASE) -#define ETH_MMC_BASE (ETH_BASE + 0x0100UL) -#define ETH_PTP_BASE (ETH_BASE + 0x0700UL) -#define ETH_DMA_BASE (ETH_BASE + 0x1000UL) - -/*!< AHB2 peripherals */ -#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000UL) -#define RNG_BASE (AHB2PERIPH_BASE + 0x60800UL) - -/*!< FSMC Bankx registers base address */ -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000UL) -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104UL) -#define FSMC_Bank2_3_R_BASE (FSMC_R_BASE + 0x0060UL) -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0UL) - - -/*!< USB registers base address */ -#define USB_OTG_HS_PERIPH_BASE 0x40040000UL -#define USB_OTG_FS_PERIPH_BASE 0x50000000UL - -#define USB_OTG_GLOBAL_BASE 0x000UL -#define USB_OTG_DEVICE_BASE 0x800UL -#define USB_OTG_IN_ENDPOINT_BASE 0x900UL -#define USB_OTG_OUT_ENDPOINT_BASE 0xB00UL -#define USB_OTG_EP_REG_SIZE 0x20UL -#define USB_OTG_HOST_BASE 0x400UL -#define USB_OTG_HOST_PORT_BASE 0x440UL -#define USB_OTG_HOST_CHANNEL_BASE 0x500UL -#define USB_OTG_HOST_CHANNEL_SIZE 0x20UL -#define USB_OTG_PCGCCTL_BASE 0xE00UL -#define USB_OTG_FIFO_BASE 0x1000UL -#define USB_OTG_FIFO_SIZE 0x1000UL - -#define UID_BASE 0x1FFF7A10UL /*!< Unique device ID register base address */ -#define FLASHSIZE_BASE 0x1FFF7A22UL /*!< FLASH Size register base address */ -#define PACKAGE_BASE 0x1FFF7BF0UL /*!< Package size register base address */ -/** - * @} - */ - - /** @addtogroup Peripheral_declaration - * @{ - */ -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define TIM12 ((TIM_TypeDef *) TIM12_BASE) -#define TIM13 ((TIM_TypeDef *) TIM13_BASE) -#define TIM14 ((TIM_TypeDef *) TIM14_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC1 ((DAC_TypeDef *) DAC_BASE) -#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define USART6 ((USART_TypeDef *) USART6_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE) - /* Legacy define */ -#define ADC ADC123_COMMON -#define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define TIM9 ((TIM_TypeDef *) TIM9_BASE) -#define TIM10 ((TIM_TypeDef *) TIM10_BASE) -#define TIM11 ((TIM_TypeDef *) TIM11_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) -#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) -#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) -#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) -#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) -#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) -#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) -#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) -#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) -#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) -#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) -#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) -#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) -#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) -#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) -#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) -#define DCMI ((DCMI_TypeDef *) DCMI_BASE) -#define RNG ((RNG_TypeDef *) RNG_BASE) -#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) -#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) -#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *) FSMC_Bank2_3_R_BASE) -#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) -#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) -#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - -/** @addtogroup Hardware_Constant_Definition - * @{ - */ -#define LSI_STARTUP_TIME 40U /*!< LSI Maximum startup time in us */ -/** - * @} - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter */ -/* */ -/******************************************************************************/ -/* - * @brief Specific device feature definitions (not present on all devices in the STM32F4 serie) - */ -#define ADC_MULTIMODE_SUPPORT /*!APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -/** @brief Main Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE)) - -/** @brief System Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\ - }while(0); - -/** @brief Embedded SRAM mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\ - }while(0); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable - * @{ - */ -/** @brief SYSCFG Break Lockup lock - * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input - * @note The selected configuration is locked and can be unlocked by system reset - */ -#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ - SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ - }while(0) -/** - * @} - */ - -/** @defgroup PVD_Lock_Enable PVD Lock - * @{ - */ -/** @brief SYSCFG Break PVD lock - * Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register - * @note The selected configuration is locked and can be unlocked by system reset - */ -#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ - SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ - }while(0) -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup HAL_Private_Macros HAL Private Macros - * @{ - */ -#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ - ((FREQ) == HAL_TICK_FREQ_100HZ) || \ - ((FREQ) == HAL_TICK_FREQ_1KHZ)) -/** - * @} - */ - -/* Exported variables --------------------------------------------------------*/ - -/** @addtogroup HAL_Exported_Variables - * @{ - */ -extern __IO uint32_t uwTick; -extern uint32_t uwTickPrio; -extern HAL_TickFreqTypeDef uwTickFreq; -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Functions - * @{ - */ -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ -/* Initialization and Configuration functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(uint32_t Delay); -uint32_t HAL_GetTick(void); -uint32_t HAL_GetTickPrio(void); -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); -HAL_TickFreqTypeDef HAL_GetTickFreq(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); -void HAL_EnableCompensationCell(void); -void HAL_DisableCompensationCell(void); -uint32_t HAL_GetUIDw0(void); -uint32_t HAL_GetUIDw1(void); -uint32_t HAL_GetUIDw2(void); -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -void HAL_EnableMemorySwappingBank(void); -void HAL_DisableMemorySwappingBank(void); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Variables HAL Private Variables - * @{ - */ -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Constants HAL Private Constants - * @{ - */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_H */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h deleted file mode 100644 index ce95f08..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h +++ /dev/null @@ -1,898 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_adc.h - * @author MCD Application Team - * @brief Header file containing functions prototypes of ADC HAL library. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_ADC_H -#define __STM32F4xx_ADC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include low level driver */ -#include "stm32f4xx_ll_adc.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup ADC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Types ADC Exported Types - * @{ - */ - -/** - * @brief Structure definition of ADC and regular group initialization - * @note Parameters of this structure are shared within 2 scopes: - * - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank. - * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv. - * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state. - * ADC state can be either: - * - For all parameters: ADC disabled - * - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group. - * - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going. - * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed - * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). - */ -typedef struct -{ - uint32_t ClockPrescaler; /*!< Select ADC clock prescaler. The clock is common for - all the ADCs. - This parameter can be a value of @ref ADC_ClockPrescaler */ - uint32_t Resolution; /*!< Configures the ADC resolution. - This parameter can be a value of @ref ADC_Resolution */ - uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting) - or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3). - This parameter can be a value of @ref ADC_Data_align */ - uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups. - This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. - If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1). - Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1). - If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank). - Scan direction is upward: from rank1 to rank 'n'. - This parameter can be set to ENABLE or DISABLE */ - uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence. - This parameter can be a value of @ref ADC_EOCSelection. - Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence. - Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT) - or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion. - Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()). - If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */ - FunctionalState ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group, - after the selected trigger occurred (software start or external trigger). - This parameter can be set to ENABLE or DISABLE. */ - uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer. - To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. - This parameter must be a number between Min_Data = 1 and Max_Data = 16. */ - FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). - Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. - Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided. - If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded. - This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ - uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group. - If set to ADC_SOFTWARE_START, external triggers are disabled. - If set to external trigger source, triggering is on event rising edge by default. - This parameter can be a value of @ref ADC_External_trigger_Source_Regular */ - uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group. - If trigger is set to ADC_SOFTWARE_START, this parameter is discarded. - This parameter can be a value of @ref ADC_External_trigger_edge_Regular */ - FunctionalState DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached) - or in Continuous mode (DMA transfer unlimited, whatever number of conversions). - Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. - Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). - This parameter can be set to ENABLE or DISABLE. */ -}ADC_InitTypeDef; - - - -/** - * @brief Structure definition of ADC channel for regular group - * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state. - * ADC can be either disabled or enabled without conversion on going on regular group. - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group. - This parameter can be a value of @ref ADC_channels */ - uint32_t Rank; /*!< Specifies the rank in the regular group sequencer. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ - uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. - Unit: ADC clock cycles - Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits). - This parameter can be a value of @ref ADC_sampling_times - Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. - If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. - Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), - sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) - Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */ - uint32_t Offset; /*!< Reserved for future use, can be set to 0 */ -}ADC_ChannelConfTypeDef; - -/** - * @brief ADC Configuration multi-mode structure definition - */ -typedef struct -{ - uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode. - This parameter can be a value of @ref ADC_analog_watchdog_selection */ - uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. - This parameter must be a 12-bit value. */ - uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. - This parameter must be a 12-bit value. */ - uint32_t Channel; /*!< Configures ADC channel for the analog watchdog. - This parameter has an effect only if watchdog mode is configured on single channel - This parameter can be a value of @ref ADC_channels */ - FunctionalState ITMode; /*!< Specifies whether the analog watchdog is configured - is interrupt mode or in polling mode. - This parameter can be set to ENABLE or DISABLE */ - uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */ -}ADC_AnalogWDGConfTypeDef; - -/** - * @brief HAL ADC state machine: ADC states definition (bitfields) - */ -/* States of ADC global scope */ -#define HAL_ADC_STATE_RESET 0x00000000U /*!< ADC not yet initialized or disabled */ -#define HAL_ADC_STATE_READY 0x00000001U /*!< ADC peripheral ready for use */ -#define HAL_ADC_STATE_BUSY_INTERNAL 0x00000002U /*!< ADC is busy to internal process (initialization, calibration) */ -#define HAL_ADC_STATE_TIMEOUT 0x00000004U /*!< TimeOut occurrence */ - -/* States of ADC errors */ -#define HAL_ADC_STATE_ERROR_INTERNAL 0x00000010U /*!< Internal error occurrence */ -#define HAL_ADC_STATE_ERROR_CONFIG 0x00000020U /*!< Configuration error occurrence */ -#define HAL_ADC_STATE_ERROR_DMA 0x00000040U /*!< DMA error occurrence */ - -/* States of ADC group regular */ -#define HAL_ADC_STATE_REG_BUSY 0x00000100U /*!< A conversion on group regular is ongoing or can occur (either by continuous mode, - external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ -#define HAL_ADC_STATE_REG_EOC 0x00000200U /*!< Conversion data available on group regular */ -#define HAL_ADC_STATE_REG_OVR 0x00000400U /*!< Overrun occurrence */ - -/* States of ADC group injected */ -#define HAL_ADC_STATE_INJ_BUSY 0x00001000U /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode, - external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ -#define HAL_ADC_STATE_INJ_EOC 0x00002000U /*!< Conversion data available on group injected */ - -/* States of ADC analog watchdogs */ -#define HAL_ADC_STATE_AWD1 0x00010000U /*!< Out-of-window occurrence of analog watchdog 1 */ -#define HAL_ADC_STATE_AWD2 0x00020000U /*!< Not available on STM32F4 device: Out-of-window occurrence of analog watchdog 2 */ -#define HAL_ADC_STATE_AWD3 0x00040000U /*!< Not available on STM32F4 device: Out-of-window occurrence of analog watchdog 3 */ - -/* States of ADC multi-mode */ -#define HAL_ADC_STATE_MULTIMODE_SLAVE 0x00100000U /*!< Not available on STM32F4 device: ADC in multimode slave state, controlled by another ADC master ( */ - - -/** - * @brief ADC handle Structure definition - */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -typedef struct __ADC_HandleTypeDef -#else -typedef struct -#endif -{ - ADC_TypeDef *Instance; /*!< Register base address */ - - ADC_InitTypeDef Init; /*!< ADC required parameters */ - - __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */ - - DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ - - HAL_LockTypeDef Lock; /*!< ADC locking object */ - - __IO uint32_t State; /*!< ADC communication state */ - - __IO uint32_t ErrorCode; /*!< ADC Error code */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ - void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ - void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ - void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ - void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected conversion complete callback */ - void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ - void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -}ADC_HandleTypeDef; - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL ADC Callback ID enumeration definition - */ -typedef enum -{ - HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ - HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ - HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ - HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ - HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */ - HAL_ADC_MSPINIT_CB_ID = 0x05U, /*!< ADC Msp Init callback ID */ - HAL_ADC_MSPDEINIT_CB_ID = 0x06U /*!< ADC Msp DeInit callback ID */ -} HAL_ADC_CallbackIDTypeDef; - -/** - * @brief HAL ADC Callback pointer definition - */ -typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ - -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup ADC_Exported_Constants ADC Exported Constants - * @{ - */ - -/** @defgroup ADC_Error_Code ADC Error Code - * @{ - */ -#define HAL_ADC_ERROR_NONE 0x00U /*!< No error */ -#define HAL_ADC_ERROR_INTERNAL 0x01U /*!< ADC IP internal error: if problem of clocking, - enable/disable, erroneous state */ -#define HAL_ADC_ERROR_OVR 0x02U /*!< Overrun error */ -#define HAL_ADC_ERROR_DMA 0x04U /*!< DMA transfer error */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -/** - * @} - */ - - -/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler - * @{ - */ -#define ADC_CLOCK_SYNC_PCLK_DIV2 0x00000000U -#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0) -#define ADC_CLOCK_SYNC_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1) -#define ADC_CLOCK_SYNC_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE) -/** - * @} - */ - -/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases - * @{ - */ -#define ADC_TWOSAMPLINGDELAY_5CYCLES 0x00000000U -#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0) -#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1) -#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2) -#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1)) -#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3) -#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1)) -#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2)) -#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1)) -#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY) -/** - * @} - */ - -/** @defgroup ADC_Resolution ADC Resolution - * @{ - */ -#define ADC_RESOLUTION_12B 0x00000000U -#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0) -#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1) -#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES) -/** - * @} - */ - -/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular - * @{ - */ -#define ADC_EXTERNALTRIGCONVEDGE_NONE 0x00000000U -#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0) -#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1) -#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN) -/** - * @} - */ - -/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular - * @{ - */ -/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */ -/* compatibility with other STM32 devices. */ -#define ADC_EXTERNALTRIGCONV_T1_CC1 0x00000000U -#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0) -#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1) -#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2) -#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1)) -#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3) -#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1)) -#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2)) -#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1)) -#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL) -#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1U) -/** - * @} - */ - -/** @defgroup ADC_Data_align ADC Data Align - * @{ - */ -#define ADC_DATAALIGN_RIGHT 0x00000000U -#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN) -/** - * @} - */ - -/** @defgroup ADC_channels ADC Common Channels - * @{ - */ -#define ADC_CHANNEL_0 0x00000000U -#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0) -#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1) -#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2) -#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1)) -#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3) -#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1)) -#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2)) -#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1)) -#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4) -#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1)) - -#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17) -#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18) -/** - * @} - */ - -/** @defgroup ADC_sampling_times ADC Sampling Times - * @{ - */ -#define ADC_SAMPLETIME_3CYCLES 0x00000000U -#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0) -#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1) -#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0)) -#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2) -#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0)) -#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1)) -#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10) -/** - * @} - */ - - /** @defgroup ADC_EOCSelection ADC EOC Selection - * @{ - */ -#define ADC_EOC_SEQ_CONV 0x00000000U -#define ADC_EOC_SINGLE_CONV 0x00000001U -#define ADC_EOC_SINGLE_SEQ_CONV 0x00000002U /*!< reserved for future use */ -/** - * @} - */ - -/** @defgroup ADC_Event_type ADC Event Type - * @{ - */ -#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) -#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR) -/** - * @} - */ - -/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection - * @{ - */ -#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN)) -#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN)) -#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) -#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN) -#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN) -#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) -#define ADC_ANALOGWATCHDOG_NONE 0x00000000U -/** - * @} - */ - -/** @defgroup ADC_interrupts_definition ADC Interrupts Definition - * @{ - */ -#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE) -#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE) -#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE) -#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE) -/** - * @} - */ - -/** @defgroup ADC_flags_definition ADC Flags Definition - * @{ - */ -#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD) -#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC) -#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC) -#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT) -#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT) -#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR) -/** - * @} - */ - -/** @defgroup ADC_channels_type ADC Channels Type - * @{ - */ -#define ADC_ALL_CHANNELS 0x00000001U -#define ADC_REGULAR_CHANNELS 0x00000002U /*!< reserved for future use */ -#define ADC_INJECTED_CHANNELS 0x00000003U /*!< reserved for future use */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Macros ADC Exported Macros - * @{ - */ - -/** @brief Reset ADC handle state - * @param __HANDLE__ ADC handle - * @retval None - */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ - do{ \ - (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ - ((__HANDLE__)->State = HAL_ADC_STATE_RESET) -#endif - -/** - * @brief Enable the ADC peripheral. - * @param __HANDLE__ ADC handle - * @retval None - */ -#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON) - -/** - * @brief Disable the ADC peripheral. - * @param __HANDLE__ ADC handle - * @retval None - */ -#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON) - -/** - * @brief Enable the ADC end of conversion interrupt. - * @param __HANDLE__ specifies the ADC Handle. - * @param __INTERRUPT__ ADC Interrupt. - * @retval None - */ -#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__)) - -/** - * @brief Disable the ADC end of conversion interrupt. - * @param __HANDLE__ specifies the ADC Handle. - * @param __INTERRUPT__ ADC interrupt. - * @retval None - */ -#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__)) - -/** @brief Check if the specified ADC interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the ADC Handle. - * @param __INTERRUPT__ specifies the ADC interrupt source to check. - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clear the ADC's pending flags. - * @param __HANDLE__ specifies the ADC Handle. - * @param __FLAG__ ADC flag. - * @retval None - */ -#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__)) - -/** - * @brief Get the selected ADC's flag status. - * @param __HANDLE__ specifies the ADC Handle. - * @param __FLAG__ ADC flag. - * @retval None - */ -#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** - * @} - */ - -/* Include ADC HAL Extension module */ -#include "stm32f4xx_hal_adc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup ADC_Exported_Functions - * @{ - */ - -/** @addtogroup ADC_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ***********************************/ -HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); -void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); -void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -/* Callbacks Register/UnRegister functions ***********************************/ -HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup ADC_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); - -HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); - -HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); - -void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); - -HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); - -uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); - -void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); -/** - * @} - */ - -/** @addtogroup ADC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); -HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); -/** - * @} - */ - -/** @addtogroup ADC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions ***************************************************/ -uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup ADC_Private_Constants ADC Private Constants - * @{ - */ -/* Delay for ADC stabilization time. */ -/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */ -/* Unit: us */ -#define ADC_STAB_DELAY_US 3U -/* Delay for temperature sensor stabilization time. */ -/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */ -/* Unit: us */ -#define ADC_TEMPSENSOR_DELAY_US 10U -/** - * @} - */ - -/* Private macro ------------------------------------------------------------*/ - -/** @defgroup ADC_Private_Macros ADC Private Macros - * @{ - */ -/* Macro reserved for internal HAL driver usage, not intended to be used in - code of final user */ - -/** - * @brief Verification of ADC state: enabled or disabled - * @param __HANDLE__ ADC handle - * @retval SET (ADC enabled) or RESET (ADC disabled) - */ -#define ADC_IS_ENABLE(__HANDLE__) \ - ((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS ) \ - ) ? SET : RESET) - -/** - * @brief Test if conversion trigger of regular group is software start - * or external trigger. - * @param __HANDLE__ ADC handle - * @retval SET (software start) or RESET (external trigger) - */ -#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ - (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET) - -/** - * @brief Test if conversion trigger of injected group is software start - * or external trigger. - * @param __HANDLE__ ADC handle - * @retval SET (software start) or RESET (external trigger) - */ -#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \ - (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET) - -/** - * @brief Simultaneously clears and sets specific bits of the handle State - * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), - * the first parameter is the ADC handle State, the second parameter is the - * bit field to clear, the third and last parameter is the bit field to set. - * @retval None - */ -#define ADC_STATE_CLR_SET MODIFY_REG - -/** - * @brief Clear ADC error code (set it to error code: "no error") - * @param __HANDLE__ ADC handle - * @retval None - */ -#define ADC_CLEAR_ERRORCODE(__HANDLE__) \ - ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) - - -#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \ - ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) || \ - ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV6) || \ - ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV8)) -#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES)) -#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ - ((RESOLUTION) == ADC_RESOLUTION_10B) || \ - ((RESOLUTION) == ADC_RESOLUTION_8B) || \ - ((RESOLUTION) == ADC_RESOLUTION_6B)) -#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING)) -#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \ - ((REGTRIG) == ADC_SOFTWARE_START)) -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ - ((ALIGN) == ADC_DATAALIGN_LEFT)) -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_15CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_28CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_56CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_84CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_112CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_144CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_480CYCLES)) -#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \ - ((EOCSelection) == ADC_EOC_SEQ_CONV) || \ - ((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV)) -#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \ - ((EVENT) == ADC_OVR_EVENT)) -#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE)) -#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \ - ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \ - ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS)) -#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFFU) - -#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 16U)) -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= (16U))) -#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U)) -#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \ - ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= 0x0FFFU)) || \ - (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= 0x03FFU)) || \ - (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= 0x00FFU)) || \ - (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= 0x003FU))) - -/** - * @brief Set ADC Regular channel sequence length. - * @param _NbrOfConversion_ Regular channel sequence length. - * @retval None - */ -#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1U) << 20U) - -/** - * @brief Set the ADC's sample time for channel numbers between 10 and 18. - * @param _SAMPLETIME_ Sample time parameter. - * @param _CHANNELNB_ Channel number. - * @retval None - */ -#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10U))) - -/** - * @brief Set the ADC's sample time for channel numbers between 0 and 9. - * @param _SAMPLETIME_ Sample time parameter. - * @param _CHANNELNB_ Channel number. - * @retval None - */ -#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * ((uint32_t)((uint16_t)(_CHANNELNB_))))) - -/** - * @brief Set the selected regular channel rank for rank between 1 and 6. - * @param _CHANNELNB_ Channel number. - * @param _RANKNB_ Rank number. - * @retval None - */ -#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 1U))) - -/** - * @brief Set the selected regular channel rank for rank between 7 and 12. - * @param _CHANNELNB_ Channel number. - * @param _RANKNB_ Rank number. - * @retval None - */ -#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 7U))) - -/** - * @brief Set the selected regular channel rank for rank between 13 and 16. - * @param _CHANNELNB_ Channel number. - * @param _RANKNB_ Rank number. - * @retval None - */ -#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 13U))) - -/** - * @brief Enable ADC continuous conversion mode. - * @param _CONTINUOUS_MODE_ Continuous mode. - * @retval None - */ -#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1U) - -/** - * @brief Configures the number of discontinuous conversions for the regular group channels. - * @param _NBR_DISCONTINUOUSCONV_ Number of discontinuous conversions. - * @retval None - */ -#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1U) << ADC_CR1_DISCNUM_Pos) - -/** - * @brief Enable ADC scan mode. - * @param _SCANCONV_MODE_ Scan conversion mode. - * @retval None - */ -#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8U) - -/** - * @brief Enable the ADC end of conversion selection. - * @param _EOCSelection_MODE_ End of conversion selection mode. - * @retval None - */ -#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10U) - -/** - * @brief Enable the ADC DMA continuous request. - * @param _DMAContReq_MODE_ DMA continuous request mode. - * @retval None - */ -#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9U) - -/** - * @brief Return resolution bits in CR1 register. - * @param __HANDLE__ ADC handle - * @retval None - */ -#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup ADC_Private_Functions ADC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_ADC_H */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h deleted file mode 100644 index 515435f..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h +++ /dev/null @@ -1,407 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_adc_ex.h - * @author MCD Application Team - * @brief Header file of ADC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_ADC_EX_H -#define __STM32F4xx_ADC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup ADCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Types ADC Exported Types - * @{ - */ - -/** - * @brief ADC Configuration injected Channel structure definition - * @note Parameters of this structure are shared within 2 scopes: - * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset - * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, - * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv. - * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. - * ADC state can be either: - * - For all parameters: ADC disabled - * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group. - * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group. - */ -typedef struct -{ - uint32_t InjectedChannel; /*!< Selection of ADC channel to configure - This parameter can be a value of @ref ADC_channels - Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */ - uint32_t InjectedRank; /*!< Rank in the injected group sequencer - This parameter must be a value of @ref ADCEx_injected_rank - Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ - uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. - Unit: ADC clock cycles - Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits). - This parameter can be a value of @ref ADC_sampling_times - Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. - If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. - Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), - sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) - Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */ - uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only). - Offset value must be a positive number. - Depending of ADC resolution selected (12, 10, 8 or 6 bits), - this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ - uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer. - To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. - This parameter must be a number between Min_Data = 1 and Max_Data = 4. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). - Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. - Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. - This parameter can be set to ENABLE or DISABLE. - Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one - This parameter can be set to ENABLE or DISABLE. - Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) - Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START) - Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. - To maintain JAUTO always enabled, DMA must be configured in circular mode. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. - If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled. - If set to external trigger source, triggering is on event rising edge. - This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected - Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). - If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group. - This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected. - If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ -}ADC_InjectionConfTypeDef; - -/** - * @brief ADC Configuration multi-mode structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode. - This parameter can be a value of @ref ADCEx_Common_mode */ - uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode. - This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */ - uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. - This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */ -}ADC_MultiModeTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Constants ADC Exported Constants - * @{ - */ - -/** @defgroup ADCEx_Common_mode ADC Common Mode - * @{ - */ -#define ADC_MODE_INDEPENDENT 0x00000000U -#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0) -#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1) -#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0)) -#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1)) -#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0)) -#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1)) -#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1)) -#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0)) -/** - * @} - */ - -/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode - * @{ - */ -#define ADC_DMAACCESSMODE_DISABLED 0x00000000U /*!< DMA mode disabled */ -#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/ -#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/ -#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */ -/** - * @} - */ - -/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected - * @{ - */ -#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE 0x00000000U -#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0) -#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1) -#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN) -/** - * @} - */ - -/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected - * @{ - */ -#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 0x00000000U -#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0) -#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1) -#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3) -#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2)) -#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL) -#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1U) -/** - * @} - */ - -/** @defgroup ADCEx_injected_rank ADC Injected Rank - * @{ - */ -#define ADC_INJECTED_RANK_1 0x00000001U -#define ADC_INJECTED_RANK_2 0x00000002U -#define ADC_INJECTED_RANK_3 0x00000003U -#define ADC_INJECTED_RANK_4 0x00000004U -/** - * @} - */ - -/** @defgroup ADCEx_channels ADC Specific Channels - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \ - defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \ - defined(STM32F412Cx) -#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F412Zx || - STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F411xE) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */ -#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT) -#endif /* STM32F411xE || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Macros ADC Exported Macros - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -/** - * @brief Disable internal path of ADC channel Vbat - * @note Use case of this macro: - * On devices STM32F42x and STM32F43x, ADC internal channels - * Vbat and VrefInt share the same internal path, only - * one of them can be enabled.This macro is to be used when ADC - * channels Vbat and VrefInt are selected, and must be called - * before starting conversion of ADC channel VrefInt in order - * to disable ADC channel Vbat. - * @retval None - */ -#define __HAL_ADC_PATH_INTERNAL_VBAT_DISABLE() (ADC->CCR &= ~(ADC_CCR_VBATE)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup ADCEx_Exported_Functions - * @{ - */ - -/** @addtogroup ADCEx_Exported_Functions_Group1 - * @{ - */ - -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); -HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); -HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); - -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); -HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Constants ADC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Macros ADC Private Macros - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \ - defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \ - defined(STM32F412Cx) -#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || - STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F411xE) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || \ - defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \ - ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR)) -#endif /* STM32F411xE || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \ - ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ - ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ - ((MODE) == ADC_DUALMODE_INJECSIMULT) || \ - ((MODE) == ADC_DUALMODE_REGSIMULT) || \ - ((MODE) == ADC_DUALMODE_INTERL) || \ - ((MODE) == ADC_DUALMODE_ALTERTRIG) || \ - ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \ - ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \ - ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \ - ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \ - ((MODE) == ADC_TRIPLEMODE_INTERL) || \ - ((MODE) == ADC_TRIPLEMODE_ALTERTRIG)) -#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \ - ((MODE) == ADC_DMAACCESSMODE_1) || \ - ((MODE) == ADC_DMAACCESSMODE_2) || \ - ((MODE) == ADC_DMAACCESSMODE_3)) -#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \ - ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \ - ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \ - ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING)) -#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \ - ((INJTRIG) == ADC_INJECTED_SOFTWARE_START)) -#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U)) -#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= 4U)) - -/** - * @brief Set the selected injected Channel rank. - * @param _CHANNELNB_ Channel number. - * @param _RANKNB_ Rank number. - * @param _JSQR_JL_ Sequence length. - * @retval None - */ -#define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * (uint8_t)(((_RANKNB_) + 3U) - (_JSQR_JL_)))) - -/** - * @brief Defines if the selected ADC is within ADC common register ADC123 or ADC1 - * if available (ADC2, ADC3 availability depends on STM32 product) - * @param __HANDLE__ ADC handle - * @retval Common control register ADC123 or ADC1 - */ -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define ADC_COMMON_REGISTER(__HANDLE__) ADC123_COMMON -#else -#define ADC_COMMON_REGISTER(__HANDLE__) ADC1_COMMON -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx || STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Functions ADC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_ADC_EX_H */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h deleted file mode 100644 index 9d6c226..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h +++ /dev/null @@ -1,792 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cec.h - * @author MCD Application Team - * @brief Header file of CEC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_CEC_H -#define STM32F4xx_HAL_CEC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (CEC) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CEC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CEC_Exported_Types CEC Exported Types - * @{ - */ - -/** - * @brief CEC Init Structure definition - */ -typedef struct -{ - uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. - It can be one of @ref CEC_Signal_Free_Time - and belongs to the set {0,...,7} where - 0x0 is the default configuration - else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ - - uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, - it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE - or CEC_EXTENDED_TOLERANCE */ - - uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception. - CEC_NO_RX_STOP_ON_BRE: reception is not stopped. - CEC_RX_STOP_ON_BRE: reception is stopped. */ - - uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the - CEC line upon Bit Rising Error detection. - CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. - CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ - - uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the - CEC line upon Long Bit Period Error detection. - CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. - CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ - - uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line - upon an error detected on a broadcast message. - - It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values: - - 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. - a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE - and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. - b) LBPE detection: error-bit generation on the CEC line - if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. - - 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. - no error-bit generation in case neither a) nor b) are satisfied. Additionally, - there is no error-bit generation in case of Short Bit Period Error detection in - a broadcast message while LSTN bit is set. */ - - uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts. - CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. - CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */ - - uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values: - - CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its - own address (OAR). Messages addressed to different destination are ignored. - Broadcast messages are always received. - - CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own - address (OAR) with positive acknowledge. Messages addressed to different destination - are received, but without interfering with the CEC bus: no acknowledge sent. */ - - uint16_t OwnAddress; /*!< Own addresses configuration - This parameter can be a value of @ref CEC_OWN_ADDRESS */ - - uint8_t *RxBuffer; /*!< CEC Rx buffer pointer */ - - -} CEC_InitTypeDef; - -/** - * @brief HAL CEC State definition - * @note HAL CEC State value is a combination of 2 different substates: gState and RxState (see @ref CEC_State_Definition). - * - gState contains CEC state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7 (not used) - * x : Should be set to 0 - * b6 Error information - * 0 : No Error - * 1 : Error - * b5 CEC peripheral initialization status - * 0 : Reset (peripheral not initialized) - * 1 : Init done (peripheral initialized. HAL CEC Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (peripheral busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 CEC peripheral initialization status - * 0 : Reset (peripheral not initialized) - * 1 : Init done (peripheral initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef uint32_t HAL_CEC_StateTypeDef; - -/** - * @brief CEC handle Structure definition - */ -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -typedef struct __CEC_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -{ - CEC_TypeDef *Instance; /*!< CEC registers base address */ - - CEC_InitTypeDef Init; /*!< CEC communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ - - uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ - - uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_CEC_StateTypeDef */ - - HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. - This parameter can be a value of @ref HAL_CEC_StateTypeDef */ - - uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register - in case error is reported */ - -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) - void (* TxCpltCallback)(struct __CEC_HandleTypeDef - *hcec); /*!< CEC Tx Transfer completed callback */ - void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec, - uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ - void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */ - - void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */ - void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */ - -#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ -} CEC_HandleTypeDef; - -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL CEC Callback ID enumeration definition - */ -typedef enum -{ - HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ - HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ - HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ - HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ - HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ -} HAL_CEC_CallbackIDTypeDef; - -/** - * @brief HAL CEC Callback pointer definition - */ -typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */ -typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec, - uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */ -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CEC_Exported_Constants CEC Exported Constants - * @{ - */ -/** @defgroup CEC_State_Definition CEC State Code Definition - * @{ - */ -#define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized - Value is allowed for gState and RxState */ -#define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ -#define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing - Value is allowed for RxState only */ -#define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing - Value is allowed for gState only */ -#define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /*!< Error Value is allowed for gState only */ -/** - * @} - */ -/** @defgroup CEC_Error_Code CEC Error Code - * @{ - */ -#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */ -#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ -#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ -#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ -#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ -#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ -#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ -#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ -#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ -#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error */ -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter - * @{ - */ -#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U) -#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U) -#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U) -#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U) -#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U) -#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U) -#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U) -#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U) -/** - * @} - */ - -/** @defgroup CEC_Tolerance CEC Receiver Tolerance - * @{ - */ -#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U) -#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) -/** - * @} - */ - -/** @defgroup CEC_BRERxStop CEC Reception Stop on Error - * @{ - */ -#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U) -#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) -/** - * @} - */ - -/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported - * @{ - */ -#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) -#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) -/** - * @} - */ - -/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported - * @{ - */ -#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) -#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) -/** - * @} - */ - -/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message - * @{ - */ -#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U) -#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) -/** - * @} - */ - -/** @defgroup CEC_SFT_Option CEC Signal Free Time start option - * @{ - */ -#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U) -#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) -/** - * @} - */ - -/** @defgroup CEC_Listening_Mode CEC Listening mode option - * @{ - */ -#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U) -#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) -/** - * @} - */ - -/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register - * @{ - */ -#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U) -/** - * @} - */ - -/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header - * @{ - */ -#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U) -/** - * @} - */ - -/** @defgroup CEC_OWN_ADDRESS CEC Own Address - * @{ - */ -#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */ -#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */ -#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */ -#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */ -#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */ -#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */ -#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */ -#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */ -#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */ -#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */ -#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */ -#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */ -#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */ -#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */ -#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */ -#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */ -/** - * @} - */ - -/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition - * @{ - */ -#define CEC_IT_TXACKE CEC_IER_TXACKEIE -#define CEC_IT_TXERR CEC_IER_TXERRIE -#define CEC_IT_TXUDR CEC_IER_TXUDRIE -#define CEC_IT_TXEND CEC_IER_TXENDIE -#define CEC_IT_TXBR CEC_IER_TXBRIE -#define CEC_IT_ARBLST CEC_IER_ARBLSTIE -#define CEC_IT_RXACKE CEC_IER_RXACKEIE -#define CEC_IT_LBPE CEC_IER_LBPEIE -#define CEC_IT_SBPE CEC_IER_SBPEIE -#define CEC_IT_BRE CEC_IER_BREIE -#define CEC_IT_RXOVR CEC_IER_RXOVRIE -#define CEC_IT_RXEND CEC_IER_RXENDIE -#define CEC_IT_RXBR CEC_IER_RXBRIE -/** - * @} - */ - -/** @defgroup CEC_Flags_Definitions CEC Flags definition - * @{ - */ -#define CEC_FLAG_TXACKE CEC_ISR_TXACKE -#define CEC_FLAG_TXERR CEC_ISR_TXERR -#define CEC_FLAG_TXUDR CEC_ISR_TXUDR -#define CEC_FLAG_TXEND CEC_ISR_TXEND -#define CEC_FLAG_TXBR CEC_ISR_TXBR -#define CEC_FLAG_ARBLST CEC_ISR_ARBLST -#define CEC_FLAG_RXACKE CEC_ISR_RXACKE -#define CEC_FLAG_LBPE CEC_ISR_LBPE -#define CEC_FLAG_SBPE CEC_ISR_SBPE -#define CEC_FLAG_BRE CEC_ISR_BRE -#define CEC_FLAG_RXOVR CEC_ISR_RXOVR -#define CEC_FLAG_RXEND CEC_ISR_RXEND -#define CEC_FLAG_RXBR CEC_ISR_RXBR -/** - * @} - */ - -/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags - * @{ - */ -#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ - CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) -/** - * @} - */ - -/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag - * @{ - */ -#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) -/** - * @} - */ - -/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag - * @{ - */ -#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup CEC_Exported_Macros CEC Exported Macros - * @{ - */ - -/** @brief Reset CEC handle gstate & RxState - * @param __HANDLE__ CEC handle. - * @retval None - */ -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ - } while(0) -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** @brief Checks whether or not the specified CEC interrupt flag is set. - * @param __HANDLE__ specifies the CEC Handle. - * @param __FLAG__ specifies the flag to check. - * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error - * @arg CEC_FLAG_TXERR: Tx Error. - * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. - * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). - * @arg CEC_FLAG_TXBR: Tx-Byte Request. - * @arg CEC_FLAG_ARBLST: Arbitration Lost - * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge - * @arg CEC_FLAG_LBPE: Rx Long period Error - * @arg CEC_FLAG_SBPE: Rx Short period Error - * @arg CEC_FLAG_BRE: Rx Bit Rising Error - * @arg CEC_FLAG_RXOVR: Rx Overrun. - * @arg CEC_FLAG_RXEND: End Of Reception. - * @arg CEC_FLAG_RXBR: Rx-Byte Received. - * @retval ITStatus - */ -#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** @brief Clears the interrupt or status flag when raised (write at 1) - * @param __HANDLE__ specifies the CEC Handle. - * @param __FLAG__ specifies the interrupt/status flag to clear. - * This parameter can be one of the following values: - * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error - * @arg CEC_FLAG_TXERR: Tx Error. - * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. - * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). - * @arg CEC_FLAG_TXBR: Tx-Byte Request. - * @arg CEC_FLAG_ARBLST: Arbitration Lost - * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge - * @arg CEC_FLAG_LBPE: Rx Long period Error - * @arg CEC_FLAG_SBPE: Rx Short period Error - * @arg CEC_FLAG_BRE: Rx Bit Rising Error - * @arg CEC_FLAG_RXOVR: Rx Overrun. - * @arg CEC_FLAG_RXEND: End Of Reception. - * @arg CEC_FLAG_RXBR: Rx-Byte Received. - * @retval none - */ -#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) - -/** @brief Enables the specified CEC interrupt. - * @param __HANDLE__ specifies the CEC Handle. - * @param __INTERRUPT__ specifies the CEC interrupt to enable. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval none - */ -#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** @brief Disables the specified CEC interrupt. - * @param __HANDLE__ specifies the CEC Handle. - * @param __INTERRUPT__ specifies the CEC interrupt to disable. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval none - */ -#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) - -/** @brief Checks whether or not the specified CEC interrupt is enabled. - * @param __HANDLE__ specifies the CEC Handle. - * @param __INTERRUPT__ specifies the CEC interrupt to check. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval FlagStatus - */ -#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) - -/** @brief Enables the CEC device - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) - -/** @brief Disables the CEC device - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) - -/** @brief Set Transmission Start flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) - -/** @brief Set Transmission End flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. - */ -#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) - -/** @brief Get Transmission Start flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval FlagStatus - */ -#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) - -/** @brief Get Transmission End flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval FlagStatus - */ -#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) - -/** @brief Clear OAR register - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) - -/** @brief Set OAR register (without resetting previously set address in case of multi-address mode) - * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand - * @param __HANDLE__ specifies the CEC Handle. - * @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position) - * @retval none - */ -#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CEC_Exported_Functions - * @{ - */ - -/** @addtogroup CEC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); -HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); -HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); -void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); -void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); - -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, - pCEC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup CEC_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, - uint8_t *pData, uint32_t Size); -uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec); -void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer); -void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); -void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); -void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); -void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** @addtogroup CEC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec); -uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup CEC_Private_Types CEC Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Variables CEC Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Constants CEC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CEC_Private_Macros CEC Private Macros - * @{ - */ - -#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) - -#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ - ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) - -#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ - ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) - -#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) - -#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) - -#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) - -#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ - ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) - -#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ - ((__MODE__) == CEC_FULL_LISTENING_MODE)) - -/** @brief Check CEC message size. - * The message size is the payload size: without counting the header, - * it varies from 0 byte (ping operation, one header only, no payload) to - * 15 bytes (1 opcode and up to 14 operands following the header). - * @param __SIZE__ CEC message size. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) - -/** @brief Check CEC device Own Address Register (OAR) setting. - * OAR address is written in a 15-bit field within CEC_CFGR register. - * @param __ADDRESS__ CEC own address. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU) - -/** @brief Check CEC initiator or destination logical address setting. - * Initiator and destination addresses are coded over 4 bits. - * @param __ADDRESS__ CEC initiator or logical address. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU) -/** - * @} - */ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Functions CEC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* CEC */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xxHAL_CEC_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h deleted file mode 100644 index 960e1c7..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h +++ /dev/null @@ -1,683 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cryp.h - * @author MCD Application Team - * @brief Header file of CRYP HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CRYP_H -#define __STM32F4xx_HAL_CRYP_H - -#ifdef __cplusplus -extern "C" { -#endif - - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (AES) || defined (CRYP) -/** @addtogroup CRYP - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup CRYP_Exported_Types CRYP Exported Types - * @{ - */ - -/** - * @brief CRYP Init Structure definition - */ - -typedef struct -{ - uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. - This parameter can be a value of @ref CRYP_Data_Type */ - uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1. - 128 or 256 bit key length in TinyAES This parameter can be a value of @ref CRYP_Key_Size */ - uint32_t *pKey; /*!< The key used for encryption/decryption */ - uint32_t *pInitVect; /*!< The initialization vector used also as initialization - counter in CTR mode */ - uint32_t Algorithm; /*!< DES/ TDES Algorithm ECB/CBC - AES Algorithm ECB/CBC/CTR/GCM or CCM - This parameter can be a value of @ref CRYP_Algorithm_Mode */ - uint32_t *Header; /*!< used only in AES GCM and CCM Algorithm for authentication, - GCM : also known as Additional Authentication Data - CCM : named B1 composed of the associated data length and Associated Data. */ - uint32_t HeaderSize; /*!< The size of header buffer in word */ - uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */ - uint32_t DataWidthUnit; /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/ - uint32_t HeaderWidthUnit; /*!< Header Width Unit, this parameter can be value of @ref CRYP_Header_Width_Unit*/ - uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization - Vector only once and to skip configuration for consecutive processings. - This parameter can be a value of @ref CRYP_Configuration_Skip */ - -} CRYP_ConfigTypeDef; - - -/** - * @brief CRYP State Structure definition - */ - -typedef enum -{ - HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ - HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ - HAL_CRYP_STATE_BUSY = 0x02U /*!< CRYP BUSY, internal processing is ongoing */ -} HAL_CRYP_STATETypeDef; - - -/** - * @brief CRYP handle Structure definition - */ - -typedef struct __CRYP_HandleTypeDef -{ -#if defined (CRYP) - CRYP_TypeDef *Instance; /*!< CRYP registers base address */ -#else /* AES*/ - AES_TypeDef *Instance; /*!< AES Register base address */ -#endif /* End AES or CRYP */ - - CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */ - - FunctionalState AutoKeyDerivation; /*!< Used only in TinyAES to allows to bypass or not key write-up before decryption. - This parameter can be a value of ENABLE/DISABLE */ - - uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ - - uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ - - __IO uint16_t CrypHeaderCount; /*!< Counter of header data */ - - __IO uint16_t CrypInCount; /*!< Counter of input data */ - - __IO uint16_t CrypOutCount; /*!< Counter of output data */ - - uint16_t Size; /*!< length of input data in word */ - - uint32_t Phase; /*!< CRYP peripheral phase */ - - DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ - - DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< CRYP locking object */ - - __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ - - __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */ - - uint32_t KeyIVConfig; /*!< CRYP peripheral Key and IV configuration flag, used when - configuration can be skipped */ - - uint32_t SizesSum; /*!< Sum of successive payloads lengths (in bytes), stored - for a single signature computation after several - messages processing */ - -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Input FIFO transfer completed callback */ - void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Output FIFO transfer completed callback */ - void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Error callback */ - - void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp Init callback */ - void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp DeInit callback */ - -#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ -} CRYP_HandleTypeDef; - - -/** - * @} - */ - -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) -/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition - * @brief HAL CRYP Callback ID enumeration definition - * @{ - */ -typedef enum -{ - HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x01U, /*!< CRYP Input FIFO transfer completed callback ID */ - HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Output FIFO transfer completed callback ID */ - HAL_CRYP_ERROR_CB_ID = 0x03U, /*!< CRYP Error callback ID */ - - HAL_CRYP_MSPINIT_CB_ID = 0x04U, /*!< CRYP MspInit callback ID */ - HAL_CRYP_MSPDEINIT_CB_ID = 0x05U /*!< CRYP MspDeInit callback ID */ - -} HAL_CRYP_CallbackIDTypeDef; -/** - * @} - */ - -/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition - * @brief HAL CRYP Callback pointer definition - * @{ - */ - -typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp); /*!< pointer to a common CRYP callback function */ - -/** - * @} - */ - -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CRYP_Exported_Constants CRYP Exported Constants - * @{ - */ - -/** @defgroup CRYP_Error_Definition CRYP Error Definition - * @{ - */ -#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */ -#define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */ -#define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */ -#define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */ -#define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ -#define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */ -#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) -#define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */ -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit - * @{ - */ - -#define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */ -#define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is word */ - -/** - * @} - */ - -/** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit - * @{ - */ - -#define CRYP_HEADERWIDTHUNIT_WORD 0x00000000U /*!< By default, header size unit is word */ -#define CRYP_HEADERWIDTHUNIT_BYTE 0x00000001U /*!< By default, header size unit is byte */ - -/** - * @} - */ - -/** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode - * @{ - */ -#if defined(CRYP) - -#define CRYP_DES_ECB CRYP_CR_ALGOMODE_DES_ECB -#define CRYP_DES_CBC CRYP_CR_ALGOMODE_DES_CBC -#define CRYP_TDES_ECB CRYP_CR_ALGOMODE_TDES_ECB -#define CRYP_TDES_CBC CRYP_CR_ALGOMODE_TDES_CBC -#define CRYP_AES_ECB CRYP_CR_ALGOMODE_AES_ECB -#define CRYP_AES_CBC CRYP_CR_ALGOMODE_AES_CBC -#define CRYP_AES_CTR CRYP_CR_ALGOMODE_AES_CTR -#if defined (CRYP_CR_ALGOMODE_AES_GCM) -#define CRYP_AES_GCM CRYP_CR_ALGOMODE_AES_GCM -#define CRYP_AES_CCM CRYP_CR_ALGOMODE_AES_CCM -#endif /* GCM CCM defined*/ -#else /* AES*/ -#define CRYP_AES_ECB 0x00000000U /*!< Electronic codebook chaining algorithm */ -#define CRYP_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */ -#define CRYP_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */ -#define CRYP_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */ -#define CRYP_AES_CCM AES_CR_CHMOD_2 /*!< Counter with Cipher Mode */ -#endif /* End AES or CRYP */ - -/** - * @} - */ - -/** @defgroup CRYP_Key_Size CRYP Key Size - * @{ - */ -#if defined(CRYP) -#define CRYP_KEYSIZE_128B 0x00000000U -#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0 -#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1 -#else /* AES*/ -#define CRYP_KEYSIZE_128B 0x00000000U /*!< 128-bit long key */ -#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */ -#endif /* End AES or CRYP */ -/** - * @} - */ - -/** @defgroup CRYP_Data_Type CRYP Data Type - * @{ - */ -#if defined(CRYP) -#define CRYP_DATATYPE_32B 0x00000000U -#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0 -#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1 -#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE -#else /* AES*/ -#define CRYP_DATATYPE_32B 0x00000000U /*!< 32-bit data type (no swapping) */ -#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */ -#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */ -#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */ -#endif /* End AES or CRYP */ - -/** - * @} - */ - -/** @defgroup CRYP_Interrupt CRYP Interrupt - * @{ - */ -#if defined (CRYP) -#define CRYP_IT_INI CRYP_IMSCR_INIM /*!< Input FIFO Interrupt */ -#define CRYP_IT_OUTI CRYP_IMSCR_OUTIM /*!< Output FIFO Interrupt */ -#else /* AES*/ -#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */ -#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */ -#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */ -#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */ -#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */ -#endif /* End AES or CRYP */ - -/** - * @} - */ - -/** @defgroup CRYP_Flags CRYP Flags - * @{ - */ -#if defined (CRYP) -/* Flags in the SR register */ -#define CRYP_FLAG_IFEM CRYP_SR_IFEM /*!< Input FIFO is empty */ -#define CRYP_FLAG_IFNF CRYP_SR_IFNF /*!< Input FIFO is not Full */ -#define CRYP_FLAG_OFNE CRYP_SR_OFNE /*!< Output FIFO is not empty */ -#define CRYP_FLAG_OFFU CRYP_SR_OFFU /*!< Output FIFO is Full */ -#define CRYP_FLAG_BUSY CRYP_SR_BUSY /*!< The CRYP core is currently processing a block of data - or a key preparation (for AES decryption). */ -/* Flags in the RISR register */ -#define CRYP_FLAG_OUTRIS 0x01000002U /*!< Output FIFO service raw interrupt status */ -#define CRYP_FLAG_INRIS 0x01000001U /*!< Input FIFO service raw interrupt status*/ -#else /* AES*/ -/* status flags */ -#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */ -#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */ -#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */ -#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */ -/* clearing flags */ -#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */ -#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */ -#endif /* End AES or CRYP */ - -/** - * @} - */ - -/** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode - * @{ - */ - -#define CRYP_KEYIVCONFIG_ALWAYS 0x00000000U /*!< Peripheral Key and IV configuration to do systematically */ -#define CRYP_KEYIVCONFIG_ONCE 0x00000001U /*!< Peripheral Key and IV configuration to do only once */ - -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup CRYP_Exported_Macros CRYP Exported Macros - * @{ - */ - -/** @brief Reset CRYP handle state - * @param __HANDLE__ specifies the CRYP handle. - * @retval None - */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) -#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\ - (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\ - (__HANDLE__)->MspInitCallback = NULL;\ - (__HANDLE__)->MspDeInitCallback = NULL;\ - }while(0) -#else -#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET) -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - -/** - * @brief Enable/Disable the CRYP peripheral. - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ -#if defined(CRYP) -#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN) -#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN) -#else /* AES*/ -#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= AES_CR_EN) -#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~AES_CR_EN) -#endif /* End AES or CRYP */ - -/** @brief Check whether the specified CRYP status flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values for TinyAES: - * @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden - * @arg @ref CRYP_IT_WRERR Write Error - * @arg @ref CRYP_IT_RDERR Read Error - * @arg @ref CRYP_IT_CCF Computation Complete - * This parameter can be one of the following values for CRYP: - * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data - * or a key preparation (for AES decryption). - * @arg CRYP_FLAG_IFEM: Input FIFO is empty - * @arg CRYP_FLAG_IFNF: Input FIFO is not full - * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending - * @arg CRYP_FLAG_OFNE: Output FIFO is not empty - * @arg CRYP_FLAG_OFFU: Output FIFO is full - * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending - * @retval The state of __FLAG__ (TRUE or FALSE). - */ -#define CRYP_FLAG_MASK 0x0000001FU -#if defined(CRYP) -#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \ - ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK))) -#else /* AES*/ -#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) -#endif /* End AES or CRYP */ - -/** @brief Clear the CRYP pending status flag. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear - * @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ - -#if defined(AES) -#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->CR, (__FLAG__)) - - -/** @brief Check whether the specified CRYP interrupt source is enabled or not. - * @param __INTERRUPT__: CRYP interrupt source to check - * This parameter can be one of the following values for TinyAES: - * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) - * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt - * @param __HANDLE__: specifies the CRYP handle. - * @retval State of interruption (TRUE or FALSE). - */ - -#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\ - & (__INTERRUPT__)) == (__INTERRUPT__)) - -#endif /* AES */ - -/** @brief Check whether the specified CRYP interrupt is set or not. - * @param __INTERRUPT__: specifies the interrupt to check. - * This parameter can be one of the following values for TinyAES: - * @arg @ref CRYP_IT_WRERR Write Error - * @arg @ref CRYP_IT_RDERR Read Error - * @arg @ref CRYP_IT_CCF Computation Complete - * This parameter can be one of the following values for CRYP: - * @arg CRYP_IT_INI: Input FIFO service masked interrupt status - * @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status - * @param __HANDLE__: specifies the CRYP handle. - * @retval The state of __INTERRUPT__ (TRUE or FALSE). - */ -#if defined(CRYP) -#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR\ - & (__INTERRUPT__)) == (__INTERRUPT__)) -#else /* AES*/ -#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) -#endif /* End AES or CRYP */ - -/** - * @brief Enable the CRYP interrupt. - * @param __INTERRUPT__: CRYP Interrupt. - * This parameter can be one of the following values for TinyAES: - * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) - * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt - * This parameter can be one of the following values for CRYP: - * @ CRYP_IT_INI : Input FIFO service interrupt mask. - * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ -#if defined(CRYP) -#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__)) -#else /* AES*/ -#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) -#endif /* End AES or CRYP */ - -/** - * @brief Disable the CRYP interrupt. - * @param __INTERRUPT__: CRYP Interrupt. - * This parameter can be one of the following values for TinyAES: - * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) - * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt - * This parameter can be one of the following values for CRYP: - * @ CRYP_IT_INI : Input FIFO service interrupt mask. - * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ -#if defined(CRYP) -#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__)) -#else /* AES*/ -#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) -#endif /* End AES or CRYP */ - -/** - * @} - */ -#if defined (CRYP_CR_ALGOMODE_AES_GCM)|| defined (AES) -/* Include CRYP HAL Extended module */ -#include "stm32f4xx_hal_cryp_ex.h" -#endif /* AES or GCM CCM defined*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CRYP_Exported_Functions CRYP Exported Functions - * @{ - */ - -/** @addtogroup CRYP_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); -HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); -HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); -HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, - pCRYP_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group2 - * @{ - */ - -/* encryption/decryption ***********************************/ -HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, - uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, - uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); -HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); -HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); -HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); - -/** - * @} - */ - - -/** @addtogroup CRYP_Exported_Functions_Group3 - * @{ - */ -/* Interrupt Handler functions **********************************************/ -void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); -HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); -uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp); - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup CRYP_Private_Macros CRYP Private Macros - * @{ - */ - -/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters - * @{ - */ -#if defined(CRYP) -#if defined (CRYP_CR_ALGOMODE_AES_GCM) -#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_DES_ECB) || \ - ((ALGORITHM) == CRYP_DES_CBC) || \ - ((ALGORITHM) == CRYP_TDES_ECB) || \ - ((ALGORITHM) == CRYP_TDES_CBC) || \ - ((ALGORITHM) == CRYP_AES_ECB) || \ - ((ALGORITHM) == CRYP_AES_CBC) || \ - ((ALGORITHM) == CRYP_AES_CTR) || \ - ((ALGORITHM) == CRYP_AES_GCM) || \ - ((ALGORITHM) == CRYP_AES_CCM)) -#else /*NO GCM CCM */ -#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_DES_ECB) || \ - ((ALGORITHM) == CRYP_DES_CBC) || \ - ((ALGORITHM) == CRYP_TDES_ECB) || \ - ((ALGORITHM) == CRYP_TDES_CBC) || \ - ((ALGORITHM) == CRYP_AES_ECB) || \ - ((ALGORITHM) == CRYP_AES_CBC) || \ - ((ALGORITHM) == CRYP_AES_CTR)) -#endif /* GCM CCM defined*/ -#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \ - ((KEYSIZE) == CRYP_KEYSIZE_192B) || \ - ((KEYSIZE) == CRYP_KEYSIZE_256B)) -#else /* AES*/ -#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_AES_ECB) || \ - ((ALGORITHM) == CRYP_AES_CBC) || \ - ((ALGORITHM) == CRYP_AES_CTR) || \ - ((ALGORITHM) == CRYP_AES_GCM_GMAC)|| \ - ((ALGORITHM) == CRYP_AES_CCM)) - - -#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \ - ((KEYSIZE) == CRYP_KEYSIZE_256B)) -#endif /* End AES or CRYP */ - -#define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_DATATYPE_32B) || \ - ((DATATYPE) == CRYP_DATATYPE_16B) || \ - ((DATATYPE) == CRYP_DATATYPE_8B) || \ - ((DATATYPE) == CRYP_DATATYPE_1B)) - -#define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \ - ((CONFIG) == CRYP_KEYIVCONFIG_ONCE)) -/** - * @} - */ - -/** - * @} - */ - - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CRYP_Private_Constants CRYP Private Constants - * @{ - */ - -/** - * @} - */ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup CRYP_Private_Defines CRYP Private Defines - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CRYP_Private_Variables CRYP Private Variables - * @{ - */ - -/** - * @} - */ -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup CRYP_Private_Functions_Prototypes CRYP Private Functions Prototypes - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CRYP_Private_Functions CRYP Private Functions - * @{ - */ - -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ -#endif /* TinyAES or CRYP*/ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CRYP_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h deleted file mode 100644 index dd12742..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h +++ /dev/null @@ -1,142 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cryp_ex.h - * @author MCD Application Team - * @brief Header file of CRYP HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CRYP_EX_H -#define __STM32F4xx_HAL_CRYP_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CRYPEx - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CRYPEx_Exported_Types CRYPEx Exported types - * @{ - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CRYPEx_Exported_Constants CRYPEx Exported constants - * @{ - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Types CRYPEx Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions - * @{ - */ -#if defined (CRYP) || defined (AES) -/** @addtogroup CRYPEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout); -/** - * @} - */ -#endif /* CRYP||AES */ - -#if defined (AES) -/** @addtogroup CRYPEx_Exported_Functions_Group2 - * @{ - */ -void HAL_CRYPEx_EnableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp); -void HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp); -/** - * @} - */ -#endif /* AES */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CRYP_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h deleted file mode 100644 index b7e82dc..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h +++ /dev/null @@ -1,563 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dcmi.h - * @author MCD Application Team - * @brief Header file of DCMI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DCMI_H -#define __STM32F4xx_HAL_DCMI_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include DCMI HAL Extended module */ -/* (include on top of file since DCMI structures are defined in extended file) */ -#include "stm32f4xx_hal_dcmi_ex.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DCMI DCMI - * @brief DCMI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DCMI_Exported_Types DCMI Exported Types - * @{ - */ -/** - * @brief DCMI Embedded Synchronisation CODE Init structure definition - */ -typedef struct -{ - uint8_t FrameStartUnmask; /*!< Specifies the frame start delimiter unmask. */ - uint8_t LineStartUnmask; /*!< Specifies the line start delimiter unmask. */ - uint8_t LineEndUnmask; /*!< Specifies the line end delimiter unmask. */ - uint8_t FrameEndUnmask; /*!< Specifies the frame end delimiter unmask. */ -}DCMI_SyncUnmaskTypeDef; -/** - * @brief HAL DCMI State structures definition - */ -typedef enum -{ - HAL_DCMI_STATE_RESET = 0x00U, /*!< DCMI not yet initialized or disabled */ - HAL_DCMI_STATE_READY = 0x01U, /*!< DCMI initialized and ready for use */ - HAL_DCMI_STATE_BUSY = 0x02U, /*!< DCMI internal processing is ongoing */ - HAL_DCMI_STATE_TIMEOUT = 0x03U, /*!< DCMI timeout state */ - HAL_DCMI_STATE_ERROR = 0x04U, /*!< DCMI error state */ - HAL_DCMI_STATE_SUSPENDED = 0x05U /*!< DCMI suspend state */ -}HAL_DCMI_StateTypeDef; - -/** - * @brief DCMI handle Structure definition - */ -typedef struct __DCMI_HandleTypeDef -{ - DCMI_TypeDef *Instance; /*!< DCMI Register base address */ - - DCMI_InitTypeDef Init; /*!< DCMI parameters */ - - HAL_LockTypeDef Lock; /*!< DCMI locking object */ - - __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */ - - __IO uint32_t XferCount; /*!< DMA transfer counter */ - - __IO uint32_t XferSize; /*!< DMA transfer size */ - - uint32_t XferTransferNumber; /*!< DMA transfer number */ - - uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */ - - DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */ - - __IO uint32_t ErrorCode; /*!< DCMI Error code */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - void (* FrameEventCallback) ( struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Frame Event Callback */ - void (* VsyncEventCallback) ( struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Vsync Event Callback */ - void (* LineEventCallback ) ( struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Line Event Callback */ - void (* ErrorCallback) ( struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Error Callback */ - void (* MspInitCallback) ( struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Msp Init callback */ - void (* MspDeInitCallback) ( struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Msp DeInit callback */ -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ -}DCMI_HandleTypeDef; - -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) -typedef enum -{ - HAL_DCMI_FRAME_EVENT_CB_ID = 0x00U, /*!< DCMI Frame Event Callback ID */ - HAL_DCMI_VSYNC_EVENT_CB_ID = 0x01U, /*!< DCMI Vsync Event Callback ID */ - HAL_DCMI_LINE_EVENT_CB_ID = 0x02U, /*!< DCMI Line Event Callback ID */ - HAL_DCMI_ERROR_CB_ID = 0x03U, /*!< DCMI Error Callback ID */ - HAL_DCMI_MSPINIT_CB_ID = 0x04U, /*!< DCMI MspInit callback ID */ - HAL_DCMI_MSPDEINIT_CB_ID = 0x05U /*!< DCMI MspDeInit callback ID */ - -}HAL_DCMI_CallbackIDTypeDef; - -typedef void (*pDCMI_CallbackTypeDef)(DCMI_HandleTypeDef *hdcmi); -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ - - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DCMI_Exported_Constants DCMI Exported Constants - * @{ - */ - -/** @defgroup DCMI_Error_Code DCMI Error Code - * @{ - */ -#define HAL_DCMI_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DCMI_ERROR_OVR 0x00000001U /*!< Overrun error */ -#define HAL_DCMI_ERROR_SYNC 0x00000002U /*!< Synchronization error */ -#define HAL_DCMI_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#define HAL_DCMI_ERROR_DMA 0x00000040U /*!< DMA error */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) -#define HAL_DCMI_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid callback error */ -#endif -/** - * @} - */ - -/** @defgroup DCMI_Capture_Mode DCMI Capture Mode - * @{ - */ -#define DCMI_MODE_CONTINUOUS 0x00000000U /*!< The received data are transferred continuously - into the destination memory through the DMA */ -#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of - frame and then transfers a single frame through the DMA */ -/** - * @} - */ - -/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode - * @{ - */ -#define DCMI_SYNCHRO_HARDWARE 0x00000000U /*!< Hardware synchronization data capture (frame/line start/stop) - is synchronized with the HSYNC/VSYNC signals */ -#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with - synchronization codes embedded in the data flow */ - -/** - * @} - */ - -/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity - * @{ - */ -#define DCMI_PCKPOLARITY_FALLING 0x00000000U /*!< Pixel clock active on Falling edge */ -#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */ - -/** - * @} - */ - -/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity - * @{ - */ -#define DCMI_VSPOLARITY_LOW 0x00000000U /*!< Vertical synchronization active Low */ -#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */ - -/** - * @} - */ - -/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity - * @{ - */ -#define DCMI_HSPOLARITY_LOW 0x00000000U /*!< Horizontal synchronization active Low */ -#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */ - -/** - * @} - */ - -/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG - * @{ - */ -#define DCMI_JPEG_DISABLE 0x00000000U /*!< Mode JPEG Disabled */ -#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */ - -/** - * @} - */ - -/** @defgroup DCMI_Capture_Rate DCMI Capture Rate - * @{ - */ -#define DCMI_CR_ALL_FRAME 0x00000000U /*!< All frames are captured */ -#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */ -#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */ - -/** - * @} - */ - -/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode - * @{ - */ -#define DCMI_EXTEND_DATA_8B 0x00000000U /*!< Interface captures 8-bit data on every pixel clock */ -#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */ -#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */ -#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */ - -/** - * @} - */ - -/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate - * @{ - */ -#define DCMI_WINDOW_COORDINATE 0x3FFFU /*!< Window coordinate */ - -/** - * @} - */ - -/** @defgroup DCMI_Window_Height DCMI Window Height - * @{ - */ -#define DCMI_WINDOW_HEIGHT 0x1FFFU /*!< Window Height */ - -/** - * @} - */ - -/** @defgroup DCMI_Window_Vertical_Line DCMI Window Vertical Line - * @{ - */ -#define DCMI_POSITION_CWSIZE_VLINE (uint32_t)DCMI_CWSIZE_VLINE_Pos /*!< Required left shift to set crop window vertical line count */ -#define DCMI_POSITION_CWSTRT_VST (uint32_t)DCMI_CWSTRT_VST_Pos /*!< Required left shift to set crop window vertical start line count */ - -/** - * @} - */ - -/** @defgroup DCMI_interrupt_sources DCMI interrupt sources - * @{ - */ -#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) /*!< Capture complete interrupt */ -#define DCMI_IT_OVR ((uint32_t)DCMI_IER_OVR_IE) /*!< Overrun interrupt */ -#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) /*!< Synchronization error interrupt */ -#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE) /*!< VSYNC interrupt */ -#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE) /*!< Line interrupt */ -/** - * @} - */ - -/** @defgroup DCMI_Flags DCMI Flags - * @{ - */ - -/** - * @brief DCMI SR register - */ -#define DCMI_FLAG_HSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_HSYNC) /*!< HSYNC pin state (active line / synchronization between lines) */ -#define DCMI_FLAG_VSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_VSYNC) /*!< VSYNC pin state (active frame / synchronization between frames) */ -#define DCMI_FLAG_FNE ((uint32_t)DCMI_SR_INDEX|DCMI_SR_FNE) /*!< FIFO not empty flag */ -/** - * @brief DCMI RIS register - */ -#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS) /*!< Frame capture complete interrupt flag */ -#define DCMI_FLAG_OVRRI ((uint32_t)DCMI_RISR_OVR_RIS) /*!< Overrun interrupt flag */ -#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS) /*!< Synchronization error interrupt flag */ -#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS) /*!< VSYNC interrupt flag */ -#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS) /*!< Line interrupt flag */ -/** - * @brief DCMI MIS register - */ -#define DCMI_FLAG_FRAMEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_FRAME_MIS) /*!< DCMI Frame capture complete masked interrupt status */ -#define DCMI_FLAG_OVRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_OVR_MIS ) /*!< DCMI Overrun masked interrupt status */ -#define DCMI_FLAG_ERRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_ERR_MIS ) /*!< DCMI Synchronization error masked interrupt status */ -#define DCMI_FLAG_VSYNCMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_VSYNC_MIS) /*!< DCMI VSYNC masked interrupt status */ -#define DCMI_FLAG_LINEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_LINE_MIS ) /*!< DCMI Line masked interrupt status */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DCMI_Exported_Macros DCMI Exported Macros - * @{ - */ - -/** @brief Reset DCMI handle state - * @param __HANDLE__ specifies the DCMI handle. - * @retval None - */ -#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_DCMI_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) - -/** - * @brief Enable the DCMI. - * @param __HANDLE__ DCMI handle - * @retval None - */ -#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE) - -/** - * @brief Disable the DCMI. - * @param __HANDLE__ DCMI handle - * @retval None - */ -#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE)) - -/* Interrupt & Flag management */ -/** - * @brief Get the DCMI pending flag. - * @param __HANDLE__ DCMI handle - * @param __FLAG__ Get the specified flag. - * This parameter can be one of the following values (no combination allowed) - * @arg DCMI_FLAG_HSYNC: HSYNC pin state (active line / synchronization between lines) - * @arg DCMI_FLAG_VSYNC: VSYNC pin state (active frame / synchronization between frames) - * @arg DCMI_FLAG_FNE: FIFO empty flag - * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask - * @arg DCMI_FLAG_OVRRI: Overrun flag mask - * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask - * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask - * @arg DCMI_FLAG_LINERI: Line flag mask - * @arg DCMI_FLAG_FRAMEMI: DCMI Capture complete masked interrupt status - * @arg DCMI_FLAG_OVRMI: DCMI Overrun masked interrupt status - * @arg DCMI_FLAG_ERRMI: DCMI Synchronization error masked interrupt status - * @arg DCMI_FLAG_VSYNCMI: DCMI VSYNC masked interrupt status - * @arg DCMI_FLAG_LINEMI: DCMI Line masked interrupt status - * @retval The state of FLAG. - */ -#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\ -((((__FLAG__) & (DCMI_SR_INDEX|DCMI_MIS_INDEX)) == 0x0U)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\ - (((__FLAG__) & DCMI_SR_INDEX) == 0x0U)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__))) - -/** - * @brief Clear the DCMI pending flags. - * @param __HANDLE__ DCMI handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask - * @arg DCMI_FLAG_OVRRI: Overrun flag mask - * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask - * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask - * @arg DCMI_FLAG_LINERI: Line flag mask - * @retval None - */ -#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** - * @brief Enable the specified DCMI interrupts. - * @param __HANDLE__ DCMI handle - * @param __INTERRUPT__ specifies the DCMI interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask - * @arg DCMI_IT_OVR: Overrun interrupt mask - * @arg DCMI_IT_ERR: Synchronization error interrupt mask - * @arg DCMI_IT_VSYNC: VSYNC interrupt mask - * @arg DCMI_IT_LINE: Line interrupt mask - * @retval None - */ -#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** - * @brief Disable the specified DCMI interrupts. - * @param __HANDLE__ DCMI handle - * @param __INTERRUPT__ specifies the DCMI interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask - * @arg DCMI_IT_OVR: Overrun interrupt mask - * @arg DCMI_IT_ERR: Synchronization error interrupt mask - * @arg DCMI_IT_VSYNC: VSYNC interrupt mask - * @arg DCMI_IT_LINE: Line interrupt mask - * @retval None - */ -#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified DCMI interrupt has occurred or not. - * @param __HANDLE__ DCMI handle - * @param __INTERRUPT__ specifies the DCMI interrupt source to check. - * This parameter can be one of the following values: - * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask - * @arg DCMI_IT_OVR: Overrun interrupt mask - * @arg DCMI_IT_ERR: Synchronization error interrupt mask - * @arg DCMI_IT_VSYNC: VSYNC interrupt mask - * @arg DCMI_IT_LINE: Line interrupt mask - * @retval The state of INTERRUPT. - */ -#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DCMI_Exported_Functions DCMI Exported Functions - * @{ - */ - -/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi); -HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi); -void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_DCMI_RegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID, pDCMI_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DCMI_UnRegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length); -HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi); -HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi); -HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi); -void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_VsyncCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_HsyncCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi); -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize); -HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi); -HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi); -HAL_StatusTypeDef HAL_DCMI_ConfigSyncUnmask(DCMI_HandleTypeDef *hdcmi, DCMI_SyncUnmaskTypeDef *SyncUnmask); -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi); -uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DCMI_Private_Constants DCMI Private Constants - * @{ - */ -#define DCMI_MIS_INDEX 0x1000U /*!< DCMI MIS register index */ -#define DCMI_SR_INDEX 0x2000U /*!< DCMI SR register index */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/** @defgroup DCMI_Private_Macros DCMI Private Macros - * @{ - */ -#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \ - ((MODE) == DCMI_MODE_SNAPSHOT)) - -#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \ - ((MODE) == DCMI_SYNCHRO_EMBEDDED)) - -#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \ - ((POLARITY) == DCMI_PCKPOLARITY_RISING)) - -#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \ - ((POLARITY) == DCMI_VSPOLARITY_HIGH)) - -#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \ - ((POLARITY) == DCMI_HSPOLARITY_HIGH)) - -#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \ - ((JPEG_MODE) == DCMI_JPEG_ENABLE)) - -#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \ - ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \ - ((RATE) == DCMI_CR_ALTERNATE_4_FRAME)) - -#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \ - ((DATA) == DCMI_EXTEND_DATA_10B) || \ - ((DATA) == DCMI_EXTEND_DATA_12B) || \ - ((DATA) == DCMI_EXTEND_DATA_14B)) - -#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE) - -#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DCMI_Private_Functions DCMI Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ - STM32F479xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DCMI_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h deleted file mode 100644 index b4f181c..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h +++ /dev/null @@ -1,208 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dcmi_ex.h - * @author MCD Application Team - * @brief Header file of DCMI Extension HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DCMI_EX_H -#define __STM32F4xx_HAL_DCMI_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DCMIEx - * @brief DCMI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DCMIEx_Exported_Types DCMI Extended Exported Types - * @{ - */ -/** - * @brief DCMIEx Embedded Synchronisation CODE Init structure definition - */ -typedef struct -{ - uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ - uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ - uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ - uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ -}DCMI_CodesInitTypeDef; - -/** - * @brief DCMI Init structure definition - */ -typedef struct -{ - uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. - This parameter can be a value of @ref DCMI_Synchronization_Mode */ - - uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. - This parameter can be a value of @ref DCMI_PIXCK_Polarity */ - - uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. - This parameter can be a value of @ref DCMI_VSYNC_Polarity */ - - uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. - This parameter can be a value of @ref DCMI_HSYNC_Polarity */ - - uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4. - This parameter can be a value of @ref DCMI_Capture_Rate */ - - uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. - This parameter can be a value of @ref DCMI_Extended_Data_Mode */ - - DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */ - - uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode - This parameter can be a value of @ref DCMI_MODE_JPEG */ -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - uint32_t ByteSelectMode; /*!< Specifies the data to be captured by the interface - This parameter can be a value of @ref DCMIEx_Byte_Select_Mode */ - - uint32_t ByteSelectStart; /*!< Specifies if the data to be captured by the interface is even or odd - This parameter can be a value of @ref DCMIEx_Byte_Select_Start */ - - uint32_t LineSelectMode; /*!< Specifies the line of data to be captured by the interface - This parameter can be a value of @ref DCMIEx_Line_Select_Mode */ - - uint32_t LineSelectStart; /*!< Specifies if the line of data to be captured by the interface is even or odd - This parameter can be a value of @ref DCMIEx_Line_Select_Start */ - -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ -}DCMI_InitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants - * @{ - */ - -/** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode - * @{ - */ -#define DCMI_BSM_ALL 0x00000000U /*!< Interface captures all received data */ -#define DCMI_BSM_OTHER ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */ -#define DCMI_BSM_ALTERNATE_4 ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */ -#define DCMI_BSM_ALTERNATE_2 ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */ - -/** - * @} - */ - -/** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start - * @{ - */ -#define DCMI_OEBS_ODD 0x00000000U /*!< Interface captures first data from the frame/line start, second one being dropped */ -#define DCMI_OEBS_EVEN ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */ - -/** - * @} - */ - -/** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode - * @{ - */ -#define DCMI_LSM_ALL 0x00000000U /*!< Interface captures all received lines */ -#define DCMI_LSM_ALTERNATE_2 ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */ - -/** - * @} - */ - -/** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start - * @{ - */ -#define DCMI_OELS_ODD 0x00000000U /*!< Interface captures first line from the frame start, second one being dropped */ -#define DCMI_OELS_EVEN ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -#define DCMI_POSITION_ESCR_LSC (uint32_t)DCMI_ESCR_LSC_Pos /*!< Required left shift to set line start delimiter */ -#define DCMI_POSITION_ESCR_LEC (uint32_t)DCMI_ESCR_LEC_Pos /*!< Required left shift to set line end delimiter */ -#define DCMI_POSITION_ESCR_FEC (uint32_t)DCMI_ESCR_FEC_Pos /*!< Required left shift to set frame end delimiter */ - -/* Private macro -------------------------------------------------------------*/ -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros - * @{ - */ -#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \ - ((MODE) == DCMI_BSM_OTHER) || \ - ((MODE) == DCMI_BSM_ALTERNATE_4) || \ - ((MODE) == DCMI_BSM_ALTERNATE_2)) - -#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \ - ((POLARITY) == DCMI_OEBS_EVEN)) - -#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \ - ((MODE) == DCMI_LSM_ALTERNATE_2)) - -#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \ - ((POLARITY) == DCMI_OELS_EVEN)) -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ - STM32F479xx */ - - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DCMI_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dfsdm.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dfsdm.h deleted file mode 100644 index 016fd30..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dfsdm.h +++ /dev/null @@ -1,1141 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dfsdm.h - * @author MCD Application Team - * @brief Header file of DFSDM HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DFSDM_H -#define __STM32F4xx_HAL_DFSDM_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DFSDM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DFSDM_Exported_Types DFSDM Exported Types - * @{ - */ - -/** - * @brief HAL DFSDM Channel states definition - */ -typedef enum -{ - HAL_DFSDM_CHANNEL_STATE_RESET = 0x00U, /*!< DFSDM channel not initialized */ - HAL_DFSDM_CHANNEL_STATE_READY = 0x01U, /*!< DFSDM channel initialized and ready for use */ - HAL_DFSDM_CHANNEL_STATE_ERROR = 0xFFU /*!< DFSDM channel state error */ -}HAL_DFSDM_Channel_StateTypeDef; - -/** - * @brief DFSDM channel output clock structure definition - */ -typedef struct -{ - FunctionalState Activation; /*!< Output clock enable/disable */ - uint32_t Selection; /*!< Output clock is system clock or audio clock. - This parameter can be a value of @ref DFSDM_Channel_OutputClock */ - uint32_t Divider; /*!< Output clock divider. - This parameter must be a number between Min_Data = 2 and Max_Data = 256 */ -}DFSDM_Channel_OutputClockTypeDef; - -/** - * @brief DFSDM channel input structure definition - */ -typedef struct -{ - uint32_t Multiplexer; /*!< Input is external serial inputs or internal register. - This parameter can be a value of @ref DFSDM_Channel_InputMultiplexer */ - uint32_t DataPacking; /*!< Standard, interleaved or dual mode for internal register. - This parameter can be a value of @ref DFSDM_Channel_DataPacking */ - uint32_t Pins; /*!< Input pins are taken from same or following channel. - This parameter can be a value of @ref DFSDM_Channel_InputPins */ -}DFSDM_Channel_InputTypeDef; - -/** - * @brief DFSDM channel serial interface structure definition - */ -typedef struct -{ - uint32_t Type; /*!< SPI or Manchester modes. - This parameter can be a value of @ref DFSDM_Channel_SerialInterfaceType */ - uint32_t SpiClock; /*!< SPI clock select (external or internal with different sampling point). - This parameter can be a value of @ref DFSDM_Channel_SpiClock */ -}DFSDM_Channel_SerialInterfaceTypeDef; - -/** - * @brief DFSDM channel analog watchdog structure definition - */ -typedef struct -{ - uint32_t FilterOrder; /*!< Analog watchdog Sinc filter order. - This parameter can be a value of @ref DFSDM_Channel_AwdFilterOrder */ - uint32_t Oversampling; /*!< Analog watchdog filter oversampling ratio. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ -}DFSDM_Channel_AwdTypeDef; - -/** - * @brief DFSDM channel init structure definition - */ -typedef struct -{ - DFSDM_Channel_OutputClockTypeDef OutputClock; /*!< DFSDM channel output clock parameters */ - DFSDM_Channel_InputTypeDef Input; /*!< DFSDM channel input parameters */ - DFSDM_Channel_SerialInterfaceTypeDef SerialInterface; /*!< DFSDM channel serial interface parameters */ - DFSDM_Channel_AwdTypeDef Awd; /*!< DFSDM channel analog watchdog parameters */ - int32_t Offset; /*!< DFSDM channel offset. - This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */ - uint32_t RightBitShift; /*!< DFSDM channel right bit shift. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ -}DFSDM_Channel_InitTypeDef; - -/** - * @brief DFSDM channel handle structure definition - */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -typedef struct __DFSDM_Channel_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ -{ - DFSDM_Channel_TypeDef *Instance; /*!< DFSDM channel instance */ - DFSDM_Channel_InitTypeDef Init; /*!< DFSDM channel init parameters */ - HAL_DFSDM_Channel_StateTypeDef State; /*!< DFSDM channel state */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - void (*CkabCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel clock absence detection callback */ - void (*ScdCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel short circuit detection callback */ - void (*MspInitCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel MSP init callback */ - void (*MspDeInitCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel MSP de-init callback */ -#endif -}DFSDM_Channel_HandleTypeDef; - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -/** - * @brief DFSDM channel callback ID enumeration definition - */ -typedef enum -{ - HAL_DFSDM_CHANNEL_CKAB_CB_ID = 0x00U, /*!< DFSDM channel clock absence detection callback ID */ - HAL_DFSDM_CHANNEL_SCD_CB_ID = 0x01U, /*!< DFSDM channel short circuit detection callback ID */ - HAL_DFSDM_CHANNEL_MSPINIT_CB_ID = 0x02U, /*!< DFSDM channel MSP init callback ID */ - HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID = 0x03U /*!< DFSDM channel MSP de-init callback ID */ -}HAL_DFSDM_Channel_CallbackIDTypeDef; - -/** - * @brief DFSDM channel callback pointer definition - */ -typedef void (*pDFSDM_Channel_CallbackTypeDef)(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -#endif -/** - * @brief HAL DFSDM Filter states definition - */ -typedef enum -{ - HAL_DFSDM_FILTER_STATE_RESET = 0x00U, /*!< DFSDM filter not initialized */ - HAL_DFSDM_FILTER_STATE_READY = 0x01U, /*!< DFSDM filter initialized and ready for use */ - HAL_DFSDM_FILTER_STATE_REG = 0x02U, /*!< DFSDM filter regular conversion in progress */ - HAL_DFSDM_FILTER_STATE_INJ = 0x03U, /*!< DFSDM filter injected conversion in progress */ - HAL_DFSDM_FILTER_STATE_REG_INJ = 0x04U, /*!< DFSDM filter regular and injected conversions in progress */ - HAL_DFSDM_FILTER_STATE_ERROR = 0xFFU /*!< DFSDM filter state error */ -}HAL_DFSDM_Filter_StateTypeDef; - -/** - * @brief DFSDM filter regular conversion parameters structure definition - */ -typedef struct -{ - uint32_t Trigger; /*!< Trigger used to start regular conversion: software or synchronous. - This parameter can be a value of @ref DFSDM_Filter_Trigger */ - FunctionalState FastMode; /*!< Enable/disable fast mode for regular conversion */ - FunctionalState DmaMode; /*!< Enable/disable DMA for regular conversion */ -}DFSDM_Filter_RegularParamTypeDef; - -/** - * @brief DFSDM filter injected conversion parameters structure definition - */ -typedef struct -{ - uint32_t Trigger; /*!< Trigger used to start injected conversion: software, external or synchronous. - This parameter can be a value of @ref DFSDM_Filter_Trigger */ - FunctionalState ScanMode; /*!< Enable/disable scanning mode for injected conversion */ - FunctionalState DmaMode; /*!< Enable/disable DMA for injected conversion */ - uint32_t ExtTrigger; /*!< External trigger. - This parameter can be a value of @ref DFSDM_Filter_ExtTrigger */ - uint32_t ExtTriggerEdge; /*!< External trigger edge: rising, falling or both. - This parameter can be a value of @ref DFSDM_Filter_ExtTriggerEdge */ -}DFSDM_Filter_InjectedParamTypeDef; - -/** - * @brief DFSDM filter parameters structure definition - */ -typedef struct -{ - uint32_t SincOrder; /*!< Sinc filter order. - This parameter can be a value of @ref DFSDM_Filter_SincOrder */ - uint32_t Oversampling; /*!< Filter oversampling ratio. - This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */ - uint32_t IntOversampling; /*!< Integrator oversampling ratio. - This parameter must be a number between Min_Data = 1 and Max_Data = 256 */ -}DFSDM_Filter_FilterParamTypeDef; - -/** - * @brief DFSDM filter init structure definition - */ -typedef struct -{ - DFSDM_Filter_RegularParamTypeDef RegularParam; /*!< DFSDM regular conversion parameters */ - DFSDM_Filter_InjectedParamTypeDef InjectedParam; /*!< DFSDM injected conversion parameters */ - DFSDM_Filter_FilterParamTypeDef FilterParam; /*!< DFSDM filter parameters */ -}DFSDM_Filter_InitTypeDef; - -/** - * @brief DFSDM filter handle structure definition - */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -typedef struct __DFSDM_Filter_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ -{ - DFSDM_Filter_TypeDef *Instance; /*!< DFSDM filter instance */ - DFSDM_Filter_InitTypeDef Init; /*!< DFSDM filter init parameters */ - DMA_HandleTypeDef *hdmaReg; /*!< Pointer on DMA handler for regular conversions */ - DMA_HandleTypeDef *hdmaInj; /*!< Pointer on DMA handler for injected conversions */ - uint32_t RegularContMode; /*!< Regular conversion continuous mode */ - uint32_t RegularTrigger; /*!< Trigger used for regular conversion */ - uint32_t InjectedTrigger; /*!< Trigger used for injected conversion */ - uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */ - FunctionalState InjectedScanMode; /*!< Injected scanning mode */ - uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */ - uint32_t InjConvRemaining; /*!< Injected conversions remaining */ - HAL_DFSDM_Filter_StateTypeDef State; /*!< DFSDM filter state */ - uint32_t ErrorCode; /*!< DFSDM filter error code */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - void (*AwdCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel, uint32_t Threshold); /*!< DFSDM filter analog watchdog callback */ - void (*RegConvCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter regular conversion complete callback */ - void (*RegConvHalfCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter half regular conversion complete callback */ - void (*InjConvCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter injected conversion complete callback */ - void (*InjConvHalfCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter half injected conversion complete callback */ - void (*ErrorCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter error callback */ - void (*MspInitCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter MSP init callback */ - void (*MspDeInitCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter MSP de-init callback */ -#endif -}DFSDM_Filter_HandleTypeDef; - -/** - * @brief DFSDM filter analog watchdog parameters structure definition - */ -typedef struct -{ - uint32_t DataSource; /*!< Values from digital filter or from channel watchdog filter. - This parameter can be a value of @ref DFSDM_Filter_AwdDataSource */ - uint32_t Channel; /*!< Analog watchdog channel selection. - This parameter can be a values combination of @ref DFSDM_Channel_Selection */ - int32_t HighThreshold; /*!< High threshold for the analog watchdog. - This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */ - int32_t LowThreshold; /*!< Low threshold for the analog watchdog. - This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */ - uint32_t HighBreakSignal; /*!< Break signal assigned to analog watchdog high threshold event. - This parameter can be a values combination of @ref DFSDM_BreakSignals */ - uint32_t LowBreakSignal; /*!< Break signal assigned to analog watchdog low threshold event. - This parameter can be a values combination of @ref DFSDM_BreakSignals */ -}DFSDM_Filter_AwdParamTypeDef; - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -/** - * @brief DFSDM filter callback ID enumeration definition - */ -typedef enum -{ - HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID = 0x00U, /*!< DFSDM filter regular conversion complete callback ID */ - HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID = 0x01U, /*!< DFSDM filter half regular conversion complete callback ID */ - HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID = 0x02U, /*!< DFSDM filter injected conversion complete callback ID */ - HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID = 0x03U, /*!< DFSDM filter half injected conversion complete callback ID */ - HAL_DFSDM_FILTER_ERROR_CB_ID = 0x04U, /*!< DFSDM filter error callback ID */ - HAL_DFSDM_FILTER_MSPINIT_CB_ID = 0x05U, /*!< DFSDM filter MSP init callback ID */ - HAL_DFSDM_FILTER_MSPDEINIT_CB_ID = 0x06U /*!< DFSDM filter MSP de-init callback ID */ -}HAL_DFSDM_Filter_CallbackIDTypeDef; - -/** - * @brief DFSDM filter callback pointer definition - */ -typedef void (*pDFSDM_Filter_CallbackTypeDef)(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -typedef void (*pDFSDM_Filter_AwdCallbackTypeDef)(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold); -#endif - -/** - * @} - */ -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** - * @brief Synchronization parameters structure definition for STM32F413xx/STM32F423xx devices - */ -typedef struct -{ - uint32_t DFSDM1ClockIn; /*!< Source selection for DFSDM1_Ckin. - This parameter can be a value of @ref DFSDM_1_CLOCKIN_SELECTION*/ - uint32_t DFSDM2ClockIn; /*!< Source selection for DFSDM2_Ckin. - This parameter can be a value of @ref DFSDM_2_CLOCKIN_SELECTION*/ - uint32_t DFSDM1ClockOut; /*!< Source selection for DFSDM1_Ckout. - This parameter can be a value of @ref DFSDM_1_CLOCKOUT_SELECTION*/ - uint32_t DFSDM2ClockOut; /*!< Source selection for DFSDM2_Ckout. - This parameter can be a value of @ref DFSDM_2_CLOCKOUT_SELECTION*/ - uint32_t DFSDM1BitClkDistribution; /*!< Distribution of the DFSDM1 bitstream clock gated by TIM4 OC1 or TIM4 OC2. - This parameter can be a value of @ref DFSDM_1_BIT_STREAM_DISTRIBUTION - @note The DFSDM2 audio gated by TIM4 OC2 can be injected on CKIN0 or CKIN2 - @note The DFSDM2 audio gated by TIM4 OC1 can be injected on CKIN1 or CKIN3 */ - uint32_t DFSDM2BitClkDistribution; /*!< Distribution of the DFSDM2 bitstream clock gated by TIM3 OC1 or TIM3 OC2 or TIM3 OC3 or TIM3 OC4. - This parameter can be a value of @ref DFSDM_2_BIT_STREAM_DISTRIBUTION - @note The DFSDM2 audio gated by TIM3 OC4 can be injected on CKIN0 or CKIN4 - @note The DFSDM2 audio gated by TIM3 OC3 can be injected on CKIN1 or CKIN5 - @note The DFSDM2 audio gated by TIM3 OC2 can be injected on CKIN2 or CKIN6 - @note The DFSDM2 audio gated by TIM3 OC1 can be injected on CKIN3 or CKIN7 */ - uint32_t DFSDM1DataDistribution; /*!< Source selection for DatIn0 and DatIn2 of DFSDM1. - This parameter can be a value of @ref DFSDM_1_DATA_DISTRIBUTION */ - uint32_t DFSDM2DataDistribution; /*!< Source selection for DatIn0, DatIn2, DatIn4 and DatIn6 of DFSDM2. - This parameter can be a value of @ref DFSDM_2_DATA_DISTRIBUTION */ -}DFSDM_MultiChannelConfigTypeDef; -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ -/** - * @} - */ - -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DFSDM_Exported_Constants DFSDM Exported Constants - * @{ - */ - -/** @defgroup DFSDM_Channel_OutputClock DFSDM channel output clock selection - * @{ - */ -#define DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM 0x00000000U /*!< Source for output clock is system clock */ -#define DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO DFSDM_CHCFGR1_CKOUTSRC /*!< Source for output clock is audio clock */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_InputMultiplexer DFSDM channel input multiplexer - * @{ - */ -#define DFSDM_CHANNEL_EXTERNAL_INPUTS 0x00000000U /*!< Data are taken from external inputs */ -#define DFSDM_CHANNEL_INTERNAL_REGISTER DFSDM_CHCFGR1_DATMPX_1 /*!< Data are taken from internal register */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_DataPacking DFSDM channel input data packing - * @{ - */ -#define DFSDM_CHANNEL_STANDARD_MODE 0x00000000U /*!< Standard data packing mode */ -#define DFSDM_CHANNEL_INTERLEAVED_MODE DFSDM_CHCFGR1_DATPACK_0 /*!< Interleaved data packing mode */ -#define DFSDM_CHANNEL_DUAL_MODE DFSDM_CHCFGR1_DATPACK_1 /*!< Dual data packing mode */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_InputPins DFSDM channel input pins - * @{ - */ -#define DFSDM_CHANNEL_SAME_CHANNEL_PINS 0x00000000U /*!< Input from pins on same channel */ -#define DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS DFSDM_CHCFGR1_CHINSEL /*!< Input from pins on following channel */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_SerialInterfaceType DFSDM channel serial interface type - * @{ - */ -#define DFSDM_CHANNEL_SPI_RISING 0x00000000U /*!< SPI with rising edge */ -#define DFSDM_CHANNEL_SPI_FALLING DFSDM_CHCFGR1_SITP_0 /*!< SPI with falling edge */ -#define DFSDM_CHANNEL_MANCHESTER_RISING DFSDM_CHCFGR1_SITP_1 /*!< Manchester with rising edge */ -#define DFSDM_CHANNEL_MANCHESTER_FALLING DFSDM_CHCFGR1_SITP /*!< Manchester with falling edge */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_SpiClock DFSDM channel SPI clock selection - * @{ - */ -#define DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL 0x00000000U /*!< External SPI clock */ -#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL DFSDM_CHCFGR1_SPICKSEL_0 /*!< Internal SPI clock */ -#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING DFSDM_CHCFGR1_SPICKSEL_1 /*!< Internal SPI clock divided by 2, falling edge */ -#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING DFSDM_CHCFGR1_SPICKSEL /*!< Internal SPI clock divided by 2, rising edge */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_AwdFilterOrder DFSDM channel analog watchdog filter order - * @{ - */ -#define DFSDM_CHANNEL_FASTSINC_ORDER 0x00000000U /*!< FastSinc filter type */ -#define DFSDM_CHANNEL_SINC1_ORDER DFSDM_CHAWSCDR_AWFORD_0 /*!< Sinc 1 filter type */ -#define DFSDM_CHANNEL_SINC2_ORDER DFSDM_CHAWSCDR_AWFORD_1 /*!< Sinc 2 filter type */ -#define DFSDM_CHANNEL_SINC3_ORDER DFSDM_CHAWSCDR_AWFORD /*!< Sinc 3 filter type */ -/** - * @} - */ - -/** @defgroup DFSDM_Filter_Trigger DFSDM filter conversion trigger - * @{ - */ -#define DFSDM_FILTER_SW_TRIGGER 0x00000000U /*!< Software trigger */ -#define DFSDM_FILTER_SYNC_TRIGGER 0x00000001U /*!< Synchronous with DFSDM_FLT0 */ -#define DFSDM_FILTER_EXT_TRIGGER 0x00000002U /*!< External trigger (only for injected conversion) */ -/** - * @} - */ - -/** @defgroup DFSDM_Filter_ExtTrigger DFSDM filter external trigger - * @{ - */ -#if defined(STM32F413xx) || defined(STM32F423xx) -/* Trigger for stm32f413xx and STM32f423xx devices */ -#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO 0x00000000U /*!< For All DFSDM1/2 filters */ -#define DFSDM_FILTER_EXT_TRIG_TIM3_TRGO DFSDM_FLTCR1_JEXTSEL_0 /*!< For All DFSDM1/2 filters */ -#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO DFSDM_FLTCR1_JEXTSEL_1 /*!< For All DFSDM1/2 filters */ -#define DFSDM_FILTER_EXT_TRIG_TIM10_OC1 (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For DFSDM1 filter 0 and 1 and DFSDM2 filter 0, 1 and 2 */ -#define DFSDM_FILTER_EXT_TRIG_TIM2_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For DFSDM2 filter 3 */ -#define DFSDM_FILTER_EXT_TRIG_TIM4_TRGO DFSDM_FLTCR1_JEXTSEL_2 /*!< For DFSDM1 filter 0 and 1 and DFSDM2 filter 0, 1 and 2 */ -#define DFSDM_FILTER_EXT_TRIG_TIM11_OC1 DFSDM_FLTCR1_JEXTSEL_2 /*!< For DFSDM2 filter 3 */ -#define DFSDM_FILTER_EXT_TRIG_TIM6_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For DFSDM1 filter 0 and 1 and DFSDM2 filter 0 and 1 */ -#define DFSDM_FILTER_EXT_TRIG_TIM7_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For DFSDM2 filter 2 and 3*/ -#define DFSDM_FILTER_EXT_TRIG_EXTI11 (DFSDM_FLTCR1_JEXTSEL_1 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For All DFSDM1/2 filters */ -#define DFSDM_FILTER_EXT_TRIG_EXTI15 DFSDM_FLTCR1_JEXTSEL /*!< For All DFSDM1/2 filters */ -#else -/* Trigger for stm32f412xx devices */ -#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO 0x00000000U /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_TIM3_TRGO DFSDM_FLTCR1_JEXTSEL_0 /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO DFSDM_FLTCR1_JEXTSEL_1 /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_TIM10_OC1 (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_TIM4_TRGO DFSDM_FLTCR1_JEXTSEL_2 /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_TIM6_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_EXTI11 (DFSDM_FLTCR1_JEXTSEL_1 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For DFSDM1 filter 0 and 1*/ -#define DFSDM_FILTER_EXT_TRIG_EXTI15 DFSDM_FLTCR1_JEXTSEL /*!< For DFSDM1 filter 0 and 1*/ -#endif -/** - * @} - */ - -/** @defgroup DFSDM_Filter_ExtTriggerEdge DFSDM filter external trigger edge - * @{ - */ -#define DFSDM_FILTER_EXT_TRIG_RISING_EDGE DFSDM_FLTCR1_JEXTEN_0 /*!< External rising edge */ -#define DFSDM_FILTER_EXT_TRIG_FALLING_EDGE DFSDM_FLTCR1_JEXTEN_1 /*!< External falling edge */ -#define DFSDM_FILTER_EXT_TRIG_BOTH_EDGES DFSDM_FLTCR1_JEXTEN /*!< External rising and falling edges */ -/** - * @} - */ - -/** @defgroup DFSDM_Filter_SincOrder DFSDM filter sinc order - * @{ - */ -#define DFSDM_FILTER_FASTSINC_ORDER 0x00000000U /*!< FastSinc filter type */ -#define DFSDM_FILTER_SINC1_ORDER DFSDM_FLTFCR_FORD_0 /*!< Sinc 1 filter type */ -#define DFSDM_FILTER_SINC2_ORDER DFSDM_FLTFCR_FORD_1 /*!< Sinc 2 filter type */ -#define DFSDM_FILTER_SINC3_ORDER (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_1) /*!< Sinc 3 filter type */ -#define DFSDM_FILTER_SINC4_ORDER DFSDM_FLTFCR_FORD_2 /*!< Sinc 4 filter type */ -#define DFSDM_FILTER_SINC5_ORDER (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_2) /*!< Sinc 5 filter type */ -/** - * @} - */ - -/** @defgroup DFSDM_Filter_AwdDataSource DFSDM filter analog watchdog data source - * @{ - */ -#define DFSDM_FILTER_AWD_FILTER_DATA 0x00000000U /*!< From digital filter */ -#define DFSDM_FILTER_AWD_CHANNEL_DATA DFSDM_FLTCR1_AWFSEL /*!< From analog watchdog channel */ -/** - * @} - */ - -/** @defgroup DFSDM_Filter_ErrorCode DFSDM filter error code - * @{ - */ -#define DFSDM_FILTER_ERROR_NONE 0x00000000U /*!< No error */ -#define DFSDM_FILTER_ERROR_REGULAR_OVERRUN 0x00000001U /*!< Overrun occurs during regular conversion */ -#define DFSDM_FILTER_ERROR_INJECTED_OVERRUN 0x00000002U /*!< Overrun occurs during injected conversion */ -#define DFSDM_FILTER_ERROR_DMA 0x00000003U /*!< DMA error occurs */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -#define DFSDM_FILTER_ERROR_INVALID_CALLBACK 0x00000004U /*!< Invalid callback error occurs */ -#endif -/** - * @} - */ - -/** @defgroup DFSDM_BreakSignals DFSDM break signals - * @{ - */ -#define DFSDM_NO_BREAK_SIGNAL 0x00000000U /*!< No break signal */ -#define DFSDM_BREAK_SIGNAL_0 0x00000001U /*!< Break signal 0 */ -#define DFSDM_BREAK_SIGNAL_1 0x00000002U /*!< Break signal 1 */ -#define DFSDM_BREAK_SIGNAL_2 0x00000004U /*!< Break signal 2 */ -#define DFSDM_BREAK_SIGNAL_3 0x00000008U /*!< Break signal 3 */ -/** - * @} - */ - -/** @defgroup DFSDM_Channel_Selection DFSDM Channel Selection - * @{ - */ -/* DFSDM Channels ------------------------------------------------------------*/ -/* The DFSDM channels are defined as follows: - - in 16-bit LSB the channel mask is set - - in 16-bit MSB the channel number is set - e.g. for channel 3 definition: - - the channel mask is 0x00000008 (bit 3 is set) - - the channel number 3 is 0x00030000 - --> Consequently, channel 3 definition is 0x00000008 | 0x00030000 = 0x00030008 */ -#define DFSDM_CHANNEL_0 0x00000001U -#define DFSDM_CHANNEL_1 0x00010002U -#define DFSDM_CHANNEL_2 0x00020004U -#define DFSDM_CHANNEL_3 0x00030008U -#define DFSDM_CHANNEL_4 0x00040010U /* only for stmm32f413xx and stm32f423xx devices */ -#define DFSDM_CHANNEL_5 0x00050020U /* only for stmm32f413xx and stm32f423xx devices */ -#define DFSDM_CHANNEL_6 0x00060040U /* only for stmm32f413xx and stm32f423xx devices */ -#define DFSDM_CHANNEL_7 0x00070080U /* only for stmm32f413xx and stm32f423xx devices */ -/** - * @} - */ - -/** @defgroup DFSDM_ContinuousMode DFSDM Continuous Mode - * @{ - */ -#define DFSDM_CONTINUOUS_CONV_OFF 0x00000000U /*!< Conversion are not continuous */ -#define DFSDM_CONTINUOUS_CONV_ON 0x00000001U /*!< Conversion are continuous */ -/** - * @} - */ - -/** @defgroup DFSDM_AwdThreshold DFSDM analog watchdog threshold - * @{ - */ -#define DFSDM_AWD_HIGH_THRESHOLD 0x00000000U /*!< Analog watchdog high threshold */ -#define DFSDM_AWD_LOW_THRESHOLD 0x00000001U /*!< Analog watchdog low threshold */ -/** - * @} - */ - -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** @defgroup DFSDM_1_CLOCKOUT_SELECTION DFSDM1 ClockOut Selection - * @{ - */ -#define DFSDM1_CKOUT_DFSDM2_CKOUT 0x00000080U -#define DFSDM1_CKOUT_DFSDM1 0x00000000U -/** - * @} - */ - -/** @defgroup DFSDM_2_CLOCKOUT_SELECTION DFSDM2 ClockOut Selection - * @{ - */ -#define DFSDM2_CKOUT_DFSDM2_CKOUT 0x00040000U -#define DFSDM2_CKOUT_DFSDM2 0x00000000U -/** - * @} - */ - -/** @defgroup DFSDM_1_CLOCKIN_SELECTION DFSDM1 ClockIn Selection - * @{ - */ -#define DFSDM1_CKIN_DFSDM2_CKOUT 0x00000040U -#define DFSDM1_CKIN_PAD 0x00000000U -/** - * @} - */ - -/** @defgroup DFSDM_2_CLOCKIN_SELECTION DFSDM2 ClockIn Selection - * @{ - */ -#define DFSDM2_CKIN_DFSDM2_CKOUT 0x00020000U -#define DFSDM2_CKIN_PAD 0x00000000U -/** - * @} - */ - -/** @defgroup DFSDM_1_BIT_STREAM_DISTRIBUTION DFSDM1 Bit Stream Distribution - * @{ - */ -#define DFSDM1_T4_OC2_BITSTREAM_CKIN0 0x00000000U /* TIM4_OC2 to CLKIN0 */ -#define DFSDM1_T4_OC2_BITSTREAM_CKIN2 SYSCFG_MCHDLYCR_DFSDM1CK02SEL /* TIM4_OC2 to CLKIN2 */ -#define DFSDM1_T4_OC1_BITSTREAM_CKIN3 SYSCFG_MCHDLYCR_DFSDM1CK13SEL /* TIM4_OC1 to CLKIN3 */ -#define DFSDM1_T4_OC1_BITSTREAM_CKIN1 0x00000000U /* TIM4_OC1 to CLKIN1 */ -/** - * @} - */ - -/** @defgroup DFSDM_2_BIT_STREAM_DISTRIBUTION DFSDM12 Bit Stream Distribution - * @{ - */ -#define DFSDM2_T3_OC4_BITSTREAM_CKIN0 0x00000000U /* TIM3_OC4 to CKIN0 */ -#define DFSDM2_T3_OC4_BITSTREAM_CKIN4 SYSCFG_MCHDLYCR_DFSDM2CK04SEL /* TIM3_OC4 to CKIN4 */ -#define DFSDM2_T3_OC3_BITSTREAM_CKIN5 SYSCFG_MCHDLYCR_DFSDM2CK15SEL /* TIM3_OC3 to CKIN5 */ -#define DFSDM2_T3_OC3_BITSTREAM_CKIN1 0x00000000U /* TIM3_OC3 to CKIN1 */ -#define DFSDM2_T3_OC2_BITSTREAM_CKIN6 SYSCFG_MCHDLYCR_DFSDM2CK26SEL /* TIM3_OC2to CKIN6 */ -#define DFSDM2_T3_OC2_BITSTREAM_CKIN2 0x00000000U /* TIM3_OC2 to CKIN2 */ -#define DFSDM2_T3_OC1_BITSTREAM_CKIN3 0x00000000U /* TIM3_OC1 to CKIN3 */ -#define DFSDM2_T3_OC1_BITSTREAM_CKIN7 SYSCFG_MCHDLYCR_DFSDM2CK37SEL /* TIM3_OC1 to CKIN7 */ -/** - * @} - */ - -/** @defgroup DFSDM_1_DATA_DISTRIBUTION DFSDM1 Data Distribution - * @{ - */ -#define DFSDM1_DATIN0_TO_DATIN0_PAD 0x00000000U -#define DFSDM1_DATIN0_TO_DATIN1_PAD SYSCFG_MCHDLYCR_DFSDM1D0SEL -#define DFSDM1_DATIN2_TO_DATIN2_PAD 0x00000000U -#define DFSDM1_DATIN2_TO_DATIN3_PAD SYSCFG_MCHDLYCR_DFSDM1D2SEL -/** - * @} - */ - -/** @defgroup DFSDM_2_DATA_DISTRIBUTION DFSDM2 Data Distribution - * @{ - */ -#define DFSDM2_DATIN0_TO_DATIN0_PAD 0x00000000U -#define DFSDM2_DATIN0_TO_DATIN1_PAD SYSCFG_MCHDLYCR_DFSDM2D0SEL -#define DFSDM2_DATIN2_TO_DATIN2_PAD 0x00000000U -#define DFSDM2_DATIN2_TO_DATIN3_PAD SYSCFG_MCHDLYCR_DFSDM2D2SEL -#define DFSDM2_DATIN4_TO_DATIN4_PAD 0x00000000U -#define DFSDM2_DATIN4_TO_DATIN5_PAD SYSCFG_MCHDLYCR_DFSDM2D4SEL -#define DFSDM2_DATIN6_TO_DATIN6_PAD 0x00000000U -#define DFSDM2_DATIN6_TO_DATIN7_PAD SYSCFG_MCHDLYCR_DFSDM2D6SEL -/** - * @} - */ - -/** @defgroup HAL_MCHDLY_CLOCK HAL MCHDLY Clock enable - * @{ - */ -#define HAL_MCHDLY_CLOCK_DFSDM2 SYSCFG_MCHDLYCR_MCHDLY2EN -#define HAL_MCHDLY_CLOCK_DFSDM1 SYSCFG_MCHDLYCR_MCHDLY1EN -/** - * @} - */ - -/** @defgroup DFSDM_CLOCKIN_SOURCE DFSDM Clock In Source Selection - * @{ - */ -#define HAL_DFSDM2_CKIN_PAD 0x00040000U -#define HAL_DFSDM2_CKIN_DM SYSCFG_MCHDLYCR_DFSDM2CFG -#define HAL_DFSDM1_CKIN_PAD 0x00000000U -#define HAL_DFSDM1_CKIN_DM SYSCFG_MCHDLYCR_DFSDM1CFG -/** - * @} - */ - -/** @defgroup DFSDM_CLOCKOUT_SOURCE DFSDM Clock Source Selection - * @{ - */ -#define HAL_DFSDM2_CKOUT_DFSDM2 0x10000000U -#define HAL_DFSDM2_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM2CKOSEL -#define HAL_DFSDM1_CKOUT_DFSDM1 0x00000000U -#define HAL_DFSDM1_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM1CKOSEL -/** - * @} - */ - -/** @defgroup DFSDM_DATAIN0_SOURCE DFSDM Source Selection For DATAIN0 - * @{ - */ -#define HAL_DATAIN0_DFSDM2_PAD 0x10000000U -#define HAL_DATAIN0_DFSDM2_DATAIN1 SYSCFG_MCHDLYCR_DFSDM2D0SEL -#define HAL_DATAIN0_DFSDM1_PAD 0x00000000U -#define HAL_DATAIN0_DFSDM1_DATAIN1 SYSCFG_MCHDLYCR_DFSDM1D0SEL -/** - * @} - */ - -/** @defgroup DFSDM_DATAIN2_SOURCE DFSDM Source Selection For DATAIN2 - * @{ - */ -#define HAL_DATAIN2_DFSDM2_PAD 0x10000000U -#define HAL_DATAIN2_DFSDM2_DATAIN3 SYSCFG_MCHDLYCR_DFSDM2D2SEL -#define HAL_DATAIN2_DFSDM1_PAD 0x00000000U -#define HAL_DATAIN2_DFSDM1_DATAIN3 SYSCFG_MCHDLYCR_DFSDM1D2SEL -/** - * @} - */ - -/** @defgroup DFSDM_DATAIN4_SOURCE DFSDM Source Selection For DATAIN4 - * @{ - */ -#define HAL_DATAIN4_DFSDM2_PAD 0x00000000U -#define HAL_DATAIN4_DFSDM2_DATAIN5 SYSCFG_MCHDLYCR_DFSDM2D4SEL -/** - * @} - */ - -/** @defgroup DFSDM_DATAIN6_SOURCE DFSDM Source Selection For DATAIN6 - * @{ - */ -#define HAL_DATAIN6_DFSDM2_PAD 0x00000000U -#define HAL_DATAIN6_DFSDM2_DATAIN7 SYSCFG_MCHDLYCR_DFSDM2D6SEL -/** - * @} - */ - -/** @defgroup DFSDM1_CLKIN_SOURCE DFSDM1 Source Selection For CLKIN - * @{ - */ -#define HAL_DFSDM1_CLKIN0_TIM4OC2 0x01000000U -#define HAL_DFSDM1_CLKIN2_TIM4OC2 SYSCFG_MCHDLYCR_DFSDM1CK02SEL -#define HAL_DFSDM1_CLKIN1_TIM4OC1 0x02000000U -#define HAL_DFSDM1_CLKIN3_TIM4OC1 SYSCFG_MCHDLYCR_DFSDM1CK13SEL -/** - * @} - */ - -/** @defgroup DFSDM2_CLKIN_SOURCE DFSDM2 Source Selection For CLKIN - * @{ - */ -#define HAL_DFSDM2_CLKIN0_TIM3OC4 0x04000000U -#define HAL_DFSDM2_CLKIN4_TIM3OC4 SYSCFG_MCHDLYCR_DFSDM2CK04SEL -#define HAL_DFSDM2_CLKIN1_TIM3OC3 0x08000000U -#define HAL_DFSDM2_CLKIN5_TIM3OC3 SYSCFG_MCHDLYCR_DFSDM2CK15SEL -#define HAL_DFSDM2_CLKIN2_TIM3OC2 0x10000000U -#define HAL_DFSDM2_CLKIN6_TIM3OC2 SYSCFG_MCHDLYCR_DFSDM2CK26SEL -#define HAL_DFSDM2_CLKIN3_TIM3OC1 0x00000000U -#define HAL_DFSDM2_CLKIN7_TIM3OC1 SYSCFG_MCHDLYCR_DFSDM2CK37SEL -/** - * @} - */ - -#endif /* SYSCFG_MCHDLYCR_BSCKSEL*/ -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup DFSDM_Exported_Macros DFSDM Exported Macros - * @{ - */ - -/** @brief Reset DFSDM channel handle state. - * @param __HANDLE__ DFSDM channel handle. - * @retval None - */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET) -#endif - -/** @brief Reset DFSDM filter handle state. - * @param __HANDLE__ DFSDM filter handle. - * @retval None - */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET) -#endif - -/** - * @} - */ -/* End of exported macros ----------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DFSDM_Exported_Functions DFSDM Exported Functions - * @{ - */ - -/** @addtogroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions - * @{ - */ -/* Channel initialization and de-initialization functions *********************/ -HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -/* Channel callbacks register/unregister functions ****************************/ -HAL_StatusTypeDef HAL_DFSDM_Channel_RegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID, - pDFSDM_Channel_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DFSDM_Channel_UnRegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID); -#endif -/** - * @} - */ - -/** @addtogroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions - * @{ - */ -/* Channel operation functions ************************************************/ -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); - -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal); -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal); -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); - -int16_t HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, int32_t Offset); - -HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout); -HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout); - -void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function - * @{ - */ -/* Channel state function *****************************************************/ -HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); -/** - * @} - */ - -/** @addtogroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions - * @{ - */ -/* Filter initialization and de-initialization functions *********************/ -HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -/* Filter callbacks register/unregister functions ****************************/ -HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID, - pDFSDM_Filter_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID); -HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - pDFSDM_Filter_AwdCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -#endif -/** - * @} - */ - -/** @addtogroup DFSDM_Exported_Functions_Group2_Filter Filter control functions - * @{ - */ -/* Filter control functions *********************/ -HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel, - uint32_t ContinuousMode); -HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel); -/** - * @} - */ - -/** @addtogroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions - * @{ - */ -/* Filter operation functions *********************/ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length); -HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length); -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - DFSDM_Filter_AwdParamTypeDef* awdParam); -HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel); -HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); - -int32_t HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel); -int32_t HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel); -int32_t HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel); -int32_t HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel); -uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); - -void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); - -HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout); -HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout); - -void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold); -void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -/** - * @} - */ - -/** @addtogroup DFSDM_Exported_Functions_Group4_Filter Filter state functions - * @{ - */ -/* Filter state functions *****************************************************/ -HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -uint32_t HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -/** - * @} - */ -/** @addtogroup DFSDM_Exported_Functions_Group5_Filter MultiChannel operation functions - * @{ - */ -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -void HAL_DFSDM_ConfigMultiChannelDelay(DFSDM_MultiChannelConfigTypeDef* mchdlystruct); -void HAL_DFSDM_BitstreamClock_Start(void); -void HAL_DFSDM_BitstreamClock_Stop(void); -void HAL_DFSDM_DisableDelayClock(uint32_t MCHDLY); -void HAL_DFSDM_EnableDelayClock(uint32_t MCHDLY); -void HAL_DFSDM_ClockIn_SourceSelection(uint32_t source); -void HAL_DFSDM_ClockOut_SourceSelection(uint32_t source); -void HAL_DFSDM_DataIn0_SourceSelection(uint32_t source); -void HAL_DFSDM_DataIn2_SourceSelection(uint32_t source); -void HAL_DFSDM_DataIn4_SourceSelection(uint32_t source); -void HAL_DFSDM_DataIn6_SourceSelection(uint32_t source); -void HAL_DFSDM_BitStreamClkDistribution_Config(uint32_t source); -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ -/** - * @} - */ -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DFSDM_Private_Macros DFSDM Private Macros -* @{ -*/ -#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK(CLOCK) (((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM) || \ - ((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO)) -#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(DIVIDER) ((2U <= (DIVIDER)) && ((DIVIDER) <= 256U)) -#define IS_DFSDM_CHANNEL_INPUT(INPUT) (((INPUT) == DFSDM_CHANNEL_EXTERNAL_INPUTS) || \ - ((INPUT) == DFSDM_CHANNEL_INTERNAL_REGISTER)) -#define IS_DFSDM_CHANNEL_DATA_PACKING(MODE) (((MODE) == DFSDM_CHANNEL_STANDARD_MODE) || \ - ((MODE) == DFSDM_CHANNEL_INTERLEAVED_MODE) || \ - ((MODE) == DFSDM_CHANNEL_DUAL_MODE)) -#define IS_DFSDM_CHANNEL_INPUT_PINS(PINS) (((PINS) == DFSDM_CHANNEL_SAME_CHANNEL_PINS) || \ - ((PINS) == DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS)) -#define IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(MODE) (((MODE) == DFSDM_CHANNEL_SPI_RISING) || \ - ((MODE) == DFSDM_CHANNEL_SPI_FALLING) || \ - ((MODE) == DFSDM_CHANNEL_MANCHESTER_RISING) || \ - ((MODE) == DFSDM_CHANNEL_MANCHESTER_FALLING)) -#define IS_DFSDM_CHANNEL_SPI_CLOCK(TYPE) (((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL) || \ - ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL) || \ - ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING) || \ - ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING)) -#define IS_DFSDM_CHANNEL_FILTER_ORDER(ORDER) (((ORDER) == DFSDM_CHANNEL_FASTSINC_ORDER) || \ - ((ORDER) == DFSDM_CHANNEL_SINC1_ORDER) || \ - ((ORDER) == DFSDM_CHANNEL_SINC2_ORDER) || \ - ((ORDER) == DFSDM_CHANNEL_SINC3_ORDER)) -#define IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 32U)) -#define IS_DFSDM_CHANNEL_OFFSET(VALUE) ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607)) -#define IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(VALUE) ((VALUE) <= 0x1FU) -#define IS_DFSDM_CHANNEL_SCD_THRESHOLD(VALUE) ((VALUE) <= 0xFFU) -#define IS_DFSDM_FILTER_REG_TRIGGER(TRIG) (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \ - ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER)) -#define IS_DFSDM_FILTER_INJ_TRIGGER(TRIG) (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \ - ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIGGER)) -#if defined (STM32F413xx) || defined (STM32F423xx) -#define IS_DFSDM_FILTER_EXT_TRIG(TRIG) (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM10_OC1) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM2_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM11_OC1) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15)) -#define IS_DFSDM_DELAY_CLOCK(CLOCK) (((CLOCK) == HAL_MCHDLY_CLOCK_DFSDM2) || \ - ((CLOCK) == HAL_MCHDLY_CLOCK_DFSDM1)) -#else -#define IS_DFSDM_FILTER_EXT_TRIG(TRIG) (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM10_OC1) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \ - ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15)) -#endif -#define IS_DFSDM_FILTER_EXT_TRIG_EDGE(EDGE) (((EDGE) == DFSDM_FILTER_EXT_TRIG_RISING_EDGE) || \ - ((EDGE) == DFSDM_FILTER_EXT_TRIG_FALLING_EDGE) || \ - ((EDGE) == DFSDM_FILTER_EXT_TRIG_BOTH_EDGES)) -#define IS_DFSDM_FILTER_SINC_ORDER(ORDER) (((ORDER) == DFSDM_FILTER_FASTSINC_ORDER) || \ - ((ORDER) == DFSDM_FILTER_SINC1_ORDER) || \ - ((ORDER) == DFSDM_FILTER_SINC2_ORDER) || \ - ((ORDER) == DFSDM_FILTER_SINC3_ORDER) || \ - ((ORDER) == DFSDM_FILTER_SINC4_ORDER) || \ - ((ORDER) == DFSDM_FILTER_SINC5_ORDER)) -#define IS_DFSDM_FILTER_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 1024U)) -#define IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 256U)) -#define IS_DFSDM_FILTER_AWD_DATA_SOURCE(DATA) (((DATA) == DFSDM_FILTER_AWD_FILTER_DATA) || \ - ((DATA) == DFSDM_FILTER_AWD_CHANNEL_DATA)) -#define IS_DFSDM_FILTER_AWD_THRESHOLD(VALUE) ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607)) -#define IS_DFSDM_BREAK_SIGNALS(VALUE) ((VALUE) <= 0x0FU) -#if defined(DFSDM2_Channel0) -#define IS_DFSDM_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == DFSDM_CHANNEL_0) || \ - ((CHANNEL) == DFSDM_CHANNEL_1) || \ - ((CHANNEL) == DFSDM_CHANNEL_2) || \ - ((CHANNEL) == DFSDM_CHANNEL_3) || \ - ((CHANNEL) == DFSDM_CHANNEL_4) || \ - ((CHANNEL) == DFSDM_CHANNEL_5) || \ - ((CHANNEL) == DFSDM_CHANNEL_6) || \ - ((CHANNEL) == DFSDM_CHANNEL_7)) -#define IS_DFSDM_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0U) && ((CHANNEL) <= 0x000F00FFU)) -#else -#define IS_DFSDM_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == DFSDM_CHANNEL_0) || \ - ((CHANNEL) == DFSDM_CHANNEL_1) || \ - ((CHANNEL) == DFSDM_CHANNEL_2) || \ - ((CHANNEL) == DFSDM_CHANNEL_3)) -#define IS_DFSDM_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0U) && ((CHANNEL) <= 0x0003000FU)) -#endif -#define IS_DFSDM_CONTINUOUS_MODE(MODE) (((MODE) == DFSDM_CONTINUOUS_CONV_OFF) || \ - ((MODE) == DFSDM_CONTINUOUS_CONV_ON)) -#if defined(DFSDM2_Channel0) -#define IS_DFSDM1_CHANNEL_INSTANCE(INSTANCE) (((INSTANCE) == DFSDM1_Channel0) || \ - ((INSTANCE) == DFSDM1_Channel1) || \ - ((INSTANCE) == DFSDM1_Channel2) || \ - ((INSTANCE) == DFSDM1_Channel3)) -#define IS_DFSDM1_FILTER_INSTANCE(INSTANCE) (((INSTANCE) == DFSDM1_Filter0) || \ - ((INSTANCE) == DFSDM1_Filter1)) -#endif /* DFSDM2_Channel0 */ - -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -#define IS_DFSDM_CLOCKIN_SELECTION(SELECTION) (((SELECTION) == HAL_DFSDM2_CKIN_PAD) || \ - ((SELECTION) == HAL_DFSDM2_CKIN_DM) || \ - ((SELECTION) == HAL_DFSDM1_CKIN_PAD) || \ - ((SELECTION) == HAL_DFSDM1_CKIN_DM)) -#define IS_DFSDM_CLOCKOUT_SELECTION(SELECTION) (((SELECTION) == HAL_DFSDM2_CKOUT_DFSDM2) || \ - ((SELECTION) == HAL_DFSDM2_CKOUT_M27) || \ - ((SELECTION) == HAL_DFSDM1_CKOUT_DFSDM1) || \ - ((SELECTION) == HAL_DFSDM1_CKOUT_M27)) -#define IS_DFSDM_DATAIN0_SRC_SELECTION(SELECTION) (((SELECTION) == HAL_DATAIN0_DFSDM2_PAD) || \ - ((SELECTION) == HAL_DATAIN0_DFSDM2_DATAIN1) || \ - ((SELECTION) == HAL_DATAIN0_DFSDM1_PAD) || \ - ((SELECTION) == HAL_DATAIN0_DFSDM1_DATAIN1)) -#define IS_DFSDM_DATAIN2_SRC_SELECTION(SELECTION) (((SELECTION) == HAL_DATAIN2_DFSDM2_PAD) || \ - ((SELECTION) == HAL_DATAIN2_DFSDM2_DATAIN3) || \ - ((SELECTION) == HAL_DATAIN2_DFSDM1_PAD) || \ - ((SELECTION) == HAL_DATAIN2_DFSDM1_DATAIN3)) -#define IS_DFSDM_DATAIN4_SRC_SELECTION(SELECTION) (((SELECTION) == HAL_DATAIN4_DFSDM2_PAD) || \ - ((SELECTION) == HAL_DATAIN4_DFSDM2_DATAIN5)) -#define IS_DFSDM_DATAIN6_SRC_SELECTION(SELECTION) (((SELECTION) == HAL_DATAIN6_DFSDM2_PAD) || \ - ((SELECTION) == HAL_DATAIN6_DFSDM2_DATAIN7)) -#define IS_DFSDM_BITSTREM_CLK_DISTRIBUTION(DISTRIBUTION) (((DISTRIBUTION) == HAL_DFSDM1_CLKIN0_TIM4OC2) || \ - ((DISTRIBUTION) == HAL_DFSDM1_CLKIN2_TIM4OC2) || \ - ((DISTRIBUTION) == HAL_DFSDM1_CLKIN1_TIM4OC1) || \ - ((DISTRIBUTION) == HAL_DFSDM1_CLKIN3_TIM4OC1) || \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN0_TIM3OC4) || \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN4_TIM3OC4) || \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN1_TIM3OC3)|| \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN5_TIM3OC3) || \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN2_TIM3OC2) || \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN6_TIM3OC2) || \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN3_TIM3OC1)|| \ - ((DISTRIBUTION) == HAL_DFSDM2_CLKIN7_TIM3OC1)) -#define IS_DFSDM_DFSDM1_CLKOUT(CLKOUT) (((CLKOUT) == DFSDM1_CKOUT_DFSDM2_CKOUT) || \ - ((CLKOUT) == DFSDM1_CKOUT_DFSDM1)) -#define IS_DFSDM_DFSDM2_CLKOUT(CLKOUT) (((CLKOUT) == DFSDM2_CKOUT_DFSDM2_CKOUT) || \ - ((CLKOUT) == DFSDM2_CKOUT_DFSDM2)) -#define IS_DFSDM_DFSDM1_CLKIN(CLKIN) (((CLKIN) == DFSDM1_CKIN_DFSDM2_CKOUT) || \ - ((CLKIN) == DFSDM1_CKIN_PAD)) -#define IS_DFSDM_DFSDM2_CLKIN(CLKIN) (((CLKIN) == DFSDM2_CKIN_DFSDM2_CKOUT) || \ - ((CLKIN) == DFSDM2_CKIN_PAD)) -#define IS_DFSDM_DFSDM1_BIT_CLK(CLK) (((CLK) == DFSDM1_T4_OC2_BITSTREAM_CKIN0) || \ - ((CLK) == DFSDM1_T4_OC2_BITSTREAM_CKIN2) || \ - ((CLK) == DFSDM1_T4_OC1_BITSTREAM_CKIN3) || \ - ((CLK) == DFSDM1_T4_OC1_BITSTREAM_CKIN1) || \ - ((CLK) <= 0x30U)) - -#define IS_DFSDM_DFSDM2_BIT_CLK(CLK) (((CLK) == DFSDM2_T3_OC4_BITSTREAM_CKIN0) || \ - ((CLK) == DFSDM2_T3_OC4_BITSTREAM_CKIN4) || \ - ((CLK) == DFSDM2_T3_OC3_BITSTREAM_CKIN5) || \ - ((CLK) == DFSDM2_T3_OC3_BITSTREAM_CKIN1) || \ - ((CLK) == DFSDM2_T3_OC2_BITSTREAM_CKIN6) || \ - ((CLK) == DFSDM2_T3_OC2_BITSTREAM_CKIN2) || \ - ((CLK) == DFSDM2_T3_OC1_BITSTREAM_CKIN3) || \ - ((CLK) == DFSDM2_T3_OC1_BITSTREAM_CKIN7)|| \ - ((CLK) <= 0x1E000U)) - -#define IS_DFSDM_DFSDM1_DATA_DISTRIBUTION(DISTRIBUTION)(((DISTRIBUTION) == DFSDM1_DATIN0_TO_DATIN0_PAD )|| \ - ((DISTRIBUTION) == DFSDM1_DATIN0_TO_DATIN1_PAD) || \ - ((DISTRIBUTION) == DFSDM1_DATIN2_TO_DATIN2_PAD) || \ - ((DISTRIBUTION) == DFSDM1_DATIN2_TO_DATIN3_PAD)|| \ - ((DISTRIBUTION) <= 0xCU)) - -#define IS_DFSDM_DFSDM2_DATA_DISTRIBUTION(DISTRIBUTION)(((DISTRIBUTION) == DFSDM2_DATIN0_TO_DATIN0_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN0_TO_DATIN1_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN2_TO_DATIN2_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN2_TO_DATIN3_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN4_TO_DATIN4_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN4_TO_DATIN5_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN6_TO_DATIN6_PAD)|| \ - ((DISTRIBUTION) == DFSDM2_DATIN6_TO_DATIN7_PAD)|| \ - ((DISTRIBUTION) <= 0x1D00U)) -#endif /* (SYSCFG_MCHDLYCR_BSCKSEL) */ -/** - * @} - */ -/* End of private macros -----------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DFSDM_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h deleted file mode 100644 index 7ff3836..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h +++ /dev/null @@ -1,802 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.h - * @author MCD Application Team - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_H -#define __STM32F4xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Types DMA Exported Types - * @brief DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel used for the specified stream. - This parameter can be a value of @ref DMA_Channel_selection */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Stream */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. - This parameter can be a value of @ref DMA_Priority_level */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_FIFO_direct_mode - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_FIFO_threshold_level */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Memory_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Peripheral_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ -}DMA_InitTypeDef; - - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */ - HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ - HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ - HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ - HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ - HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ - HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ - HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ -}HAL_DMA_CallbackIDTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Stream_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ - - void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ - - uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ - - uint32_t StreamIndex; /*!< DMA Stream Index */ - -}DMA_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @brief DMA Exported constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @brief DMA Error Code - * @{ - */ -#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ -#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */ -#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */ -#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ -#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */ -#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ -/** - * @} - */ - -/** @defgroup DMA_Channel_selection DMA Channel selection - * @brief DMA channel selection - * @{ - */ -#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */ -#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */ -#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */ -#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */ -#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */ -#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */ -#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */ -#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */ -#if defined (DMA_SxCR_CHSEL_3) -#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */ -#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */ -#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10 */ -#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11 */ -#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12 */ -#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13 */ -#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14 */ -#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15 */ -#endif /* DMA_SxCR_CHSEL_3 */ -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @brief DMA data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @brief DMA peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ -#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @brief DMA memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ -#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @brief DMA peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ -#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ -#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @brief DMA memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ -#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ -#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @brief DMA mode - * @{ - */ -#define DMA_NORMAL 0x00000000U /*!< Normal mode */ -#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ -#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @brief DMA priority levels - * @{ - */ -#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */ -#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ -#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ -#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode - * @brief DMA FIFO direct mode - * @{ - */ -#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ -#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level - * @brief DMA FIFO level - * @{ - */ -#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ -#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ -#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_Memory_burst DMA Memory burst - * @brief DMA memory burst - * @{ - */ -#define DMA_MBURST_SINGLE 0x00000000U -#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) -#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) -#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) -/** - * @} - */ - -/** @defgroup DMA_Peripheral_burst DMA Peripheral burst - * @brief DMA peripheral burst - * @{ - */ -#define DMA_PBURST_SINGLE 0x00000000U -#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) -#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) -#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) -/** - * @} - */ - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @brief DMA interrupts definition - * @{ - */ -#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) -#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) -#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) -#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) -#define DMA_IT_FE 0x00000080U -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @brief DMA flag definitions - * @{ - */ -#define DMA_FLAG_FEIF0_4 0x00000001U -#define DMA_FLAG_DMEIF0_4 0x00000004U -#define DMA_FLAG_TEIF0_4 0x00000008U -#define DMA_FLAG_HTIF0_4 0x00000010U -#define DMA_FLAG_TCIF0_4 0x00000020U -#define DMA_FLAG_FEIF1_5 0x00000040U -#define DMA_FLAG_DMEIF1_5 0x00000100U -#define DMA_FLAG_TEIF1_5 0x00000200U -#define DMA_FLAG_HTIF1_5 0x00000400U -#define DMA_FLAG_TCIF1_5 0x00000800U -#define DMA_FLAG_FEIF2_6 0x00010000U -#define DMA_FLAG_DMEIF2_6 0x00040000U -#define DMA_FLAG_TEIF2_6 0x00080000U -#define DMA_FLAG_HTIF2_6 0x00100000U -#define DMA_FLAG_TCIF2_6 0x00200000U -#define DMA_FLAG_FEIF3_7 0x00400000U -#define DMA_FLAG_DMEIF3_7 0x01000000U -#define DMA_FLAG_TEIF3_7 0x02000000U -#define DMA_FLAG_HTIF3_7 0x04000000U -#define DMA_FLAG_TCIF3_7 0x08000000U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @brief Reset DMA handle state - * @param __HANDLE__ specifies the DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Return the current DMA Stream FIFO filled level. - * @param __HANDLE__ DMA handle - * @retval The FIFO filling state. - * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full - * and not empty. - * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. - * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. - * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. - * - DMA_FIFOStatus_Empty: when FIFO is empty - * - DMA_FIFOStatus_Full: when FIFO is full - */ -#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS))) - -/** - * @brief Enable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN) - -/** - * @brief Disable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN) - -/* Interrupt & Flag management */ - -/** - * @brief Return the current DMA Stream transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ - DMA_FLAG_TCIF3_7) - -/** - * @brief Return the current DMA Stream half transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ - DMA_FLAG_HTIF3_7) - -/** - * @brief Return the current DMA Stream transfer error flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ - DMA_FLAG_TEIF3_7) - -/** - * @brief Return the current DMA Stream FIFO error flag. - * @param __HANDLE__ DMA handle - * @retval The specified FIFO error flag index. - */ -#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ - DMA_FLAG_FEIF3_7) - -/** - * @brief Return the current DMA Stream direct mode error flag. - * @param __HANDLE__ DMA handle - * @retval The specified direct mode error flag index. - */ -#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ - DMA_FLAG_DMEIF3_7) - -/** - * @brief Get the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) - -/** - * @brief Clear the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) - -/** - * @brief Enable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__))) - -/** - * @brief Disable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__))) - -/** - * @brief Check whether the specified DMA Stream interrupt is enabled or disabled. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval The state of DMA_IT. - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ - ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \ - ((__HANDLE__)->Instance->FCR & (__INTERRUPT__))) - -/** - * @brief Writes the number of data units to be transferred on the DMA Stream. - * @param __HANDLE__ DMA handle - * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535) - * Number of data items depends only on the Peripheral data format. - * - * @note If Peripheral data format is Bytes: number of data units is equal - * to total number of bytes to be transferred. - * - * @note If Peripheral data format is Half-Word: number of data units is - * equal to total number of bytes to be transferred / 2. - * - * @note If Peripheral data format is Word: number of data units is equal - * to total number of bytes to be transferred / 4. - * - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__)) - -/** - * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. - * @param __HANDLE__ DMA handle - * - * @retval The number of remaining data units in the current DMA Stream transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR) - - -/* Include DMA HAL Extension module */ -#include "stm32f4xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @brief DMA Exported functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions - * @brief I/O operation functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/** - * @} - */ -/* Private Constants -------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @brief DMA private defines and constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @brief DMA private macros - * @{ - */ -#if defined (DMA_SxCR_CHSEL_3) -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7) || \ - ((CHANNEL) == DMA_CHANNEL_8) || \ - ((CHANNEL) == DMA_CHANNEL_9) || \ - ((CHANNEL) == DMA_CHANNEL_10)|| \ - ((CHANNEL) == DMA_CHANNEL_11)|| \ - ((CHANNEL) == DMA_CHANNEL_12)|| \ - ((CHANNEL) == DMA_CHANNEL_13)|| \ - ((CHANNEL) == DMA_CHANNEL_14)|| \ - ((CHANNEL) == DMA_CHANNEL_15)) -#else -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7)) -#endif /* DMA_SxCR_CHSEL_3 */ - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR) || \ - ((MODE) == DMA_PFCTRL)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ - ((STATE) == DMA_FIFOMODE_ENABLE)) - -#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) - -#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ - ((BURST) == DMA_MBURST_INC4) || \ - ((BURST) == DMA_MBURST_INC8) || \ - ((BURST) == DMA_MBURST_INC16)) - -#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ - ((BURST) == DMA_PBURST_INC4) || \ - ((BURST) == DMA_PBURST_INC8) || \ - ((BURST) == DMA_PBURST_INC16)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @brief DMA private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DMA_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h deleted file mode 100644 index 8967141..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h +++ /dev/null @@ -1,638 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma2d.h - * @author MCD Application Team - * @brief Header file of DMA2D HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_DMA2D_H -#define STM32F4xx_HAL_DMA2D_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (DMA2D) - -/** @addtogroup DMA2D DMA2D - * @brief DMA2D HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Types DMA2D Exported Types - * @{ - */ -#define MAX_DMA2D_LAYER 2U /*!< DMA2D maximum number of layers */ - -/** - * @brief DMA2D CLUT Structure definition - */ -typedef struct -{ - uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/ - - uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode. - This parameter can be one value of @ref DMA2D_CLUT_CM. */ - - uint32_t Size; /*!< Configures the DMA2D CLUT size. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/ -} DMA2D_CLUTCfgTypeDef; - -/** - * @brief DMA2D Init structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Configures the DMA2D transfer mode. - This parameter can be one value of @ref DMA2D_Mode. */ - - uint32_t ColorMode; /*!< Configures the color format of the output image. - This parameter can be one value of @ref DMA2D_Output_Color_Mode. */ - - uint32_t OutputOffset; /*!< Specifies the Offset value. - This parameter must be a number between - Min_Data = 0x0000 and Max_Data = 0x3FFF. */ - - - - -} DMA2D_InitTypeDef; - - -/** - * @brief DMA2D Layer structure definition - */ -typedef struct -{ - uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset. - This parameter must be a number between - Min_Data = 0x0000 and Max_Data = 0x3FFF. */ - - uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode. - This parameter can be one value of @ref DMA2D_Input_Color_Mode. */ - - uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode. - This parameter can be one value of @ref DMA2D_Alpha_Mode. */ - - uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value - in case of A8 or A4 color mode. - This parameter must be a number between Min_Data = 0x00 - and Max_Data = 0xFF except for the color modes detailed below. - @note In case of A8 or A4 color mode (ARGB), - this parameter must be a number between - Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where - - InputAlpha[24:31] is the alpha value ALPHA[0:7] - - InputAlpha[16:23] is the red value RED[0:7] - - InputAlpha[8:15] is the green value GREEN[0:7] - - InputAlpha[0:7] is the blue value BLUE[0:7]. */ - - -} DMA2D_LayerCfgTypeDef; - -/** - * @brief HAL DMA2D State structures definition - */ -typedef enum -{ - HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */ - HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ - HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ - HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */ - HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */ -} HAL_DMA2D_StateTypeDef; - -/** - * @brief DMA2D handle Structure definition - */ -typedef struct __DMA2D_HandleTypeDef -{ - DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */ - - DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */ - - void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer complete callback. */ - - void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer error callback. */ - -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) - void (* LineEventCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D line event callback. */ - - void (* CLUTLoadingCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D CLUT loading completion callback */ - - void (* MspInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp Init callback. */ - - void (* MspDeInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp DeInit callback. */ - -#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ - - DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */ - - HAL_LockTypeDef Lock; /*!< DMA2D lock. */ - - __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */ - - __IO uint32_t ErrorCode; /*!< DMA2D error code. */ -} DMA2D_HandleTypeDef; - -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) -/** - * @brief HAL DMA2D Callback pointer definition - */ -typedef void (*pDMA2D_CallbackTypeDef)(DMA2D_HandleTypeDef *hdma2d); /*!< Pointer to a DMA2D common callback function */ -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants - * @{ - */ - -/** @defgroup DMA2D_Error_Code DMA2D Error Code - * @{ - */ -#define HAL_DMA2D_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DMA2D_ERROR_TE 0x00000001U /*!< Transfer error */ -#define HAL_DMA2D_ERROR_CE 0x00000002U /*!< Configuration error */ -#define HAL_DMA2D_ERROR_CAE 0x00000004U /*!< CLUT access error */ -#define HAL_DMA2D_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) -#define HAL_DMA2D_ERROR_INVALID_CALLBACK 0x00000040U /*!< Invalid callback error */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup DMA2D_Mode DMA2D Mode - * @{ - */ -#define DMA2D_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */ -#define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */ -#define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */ -#define DMA2D_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */ -/** - * @} - */ - -/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode - * @{ - */ -#define DMA2D_OUTPUT_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D color mode */ -#define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */ -#define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */ -#define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */ -#define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */ -/** - * @} - */ - -/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode - * @{ - */ -#define DMA2D_INPUT_ARGB8888 0x00000000U /*!< ARGB8888 color mode */ -#define DMA2D_INPUT_RGB888 0x00000001U /*!< RGB888 color mode */ -#define DMA2D_INPUT_RGB565 0x00000002U /*!< RGB565 color mode */ -#define DMA2D_INPUT_ARGB1555 0x00000003U /*!< ARGB1555 color mode */ -#define DMA2D_INPUT_ARGB4444 0x00000004U /*!< ARGB4444 color mode */ -#define DMA2D_INPUT_L8 0x00000005U /*!< L8 color mode */ -#define DMA2D_INPUT_AL44 0x00000006U /*!< AL44 color mode */ -#define DMA2D_INPUT_AL88 0x00000007U /*!< AL88 color mode */ -#define DMA2D_INPUT_L4 0x00000008U /*!< L4 color mode */ -#define DMA2D_INPUT_A8 0x00000009U /*!< A8 color mode */ -#define DMA2D_INPUT_A4 0x0000000AU /*!< A4 color mode */ -/** - * @} - */ - -/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode - * @{ - */ -#define DMA2D_NO_MODIF_ALPHA 0x00000000U /*!< No modification of the alpha channel value */ -#define DMA2D_REPLACE_ALPHA 0x00000001U /*!< Replace original alpha channel value by programmed alpha value */ -#define DMA2D_COMBINE_ALPHA 0x00000002U /*!< Replace original alpha channel value by programmed alpha value - with original alpha channel value */ -/** - * @} - */ - - - - - - -/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode - * @{ - */ -#define DMA2D_CCM_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D CLUT color mode */ -#define DMA2D_CCM_RGB888 0x00000001U /*!< RGB888 DMA2D CLUT color mode */ -/** - * @} - */ - -/** @defgroup DMA2D_Interrupts DMA2D Interrupts - * @{ - */ -#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ -#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */ -#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */ -#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ -#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ -#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ -/** - * @} - */ - -/** @defgroup DMA2D_Flags DMA2D Flags - * @{ - */ -#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ -#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */ -#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */ -#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ -#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ -#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ -/** - * @} - */ - -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) -/** - * @brief HAL DMA2D common Callback ID enumeration definition - */ -typedef enum -{ - HAL_DMA2D_MSPINIT_CB_ID = 0x00U, /*!< DMA2D MspInit callback ID */ - HAL_DMA2D_MSPDEINIT_CB_ID = 0x01U, /*!< DMA2D MspDeInit callback ID */ - HAL_DMA2D_TRANSFERCOMPLETE_CB_ID = 0x02U, /*!< DMA2D transfer complete callback ID */ - HAL_DMA2D_TRANSFERERROR_CB_ID = 0x03U, /*!< DMA2D transfer error callback ID */ - HAL_DMA2D_LINEEVENT_CB_ID = 0x04U, /*!< DMA2D line event callback ID */ - HAL_DMA2D_CLUTLOADINGCPLT_CB_ID = 0x05U, /*!< DMA2D CLUT loading completion callback ID */ -} HAL_DMA2D_CallbackIDTypeDef; -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ - - -/** - * @} - */ -/* Exported macros ------------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros - * @{ - */ - -/** @brief Reset DMA2D handle state - * @param __HANDLE__ specifies the DMA2D handle. - * @retval None - */ -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) -#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_DMA2D_STATE_RESET;\ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - }while(0) -#else -#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET) -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ - - -/** - * @brief Enable the DMA2D. - * @param __HANDLE__ DMA2D handle - * @retval None. - */ -#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START) - - -/* Interrupt & Flag management */ -/** - * @brief Get the DMA2D pending flags. - * @param __HANDLE__ DMA2D handle - * @param __FLAG__ flag to check. - * This parameter can be any combination of the following values: - * @arg DMA2D_FLAG_CE: Configuration error flag - * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag - * @arg DMA2D_FLAG_CAE: CLUT access error flag - * @arg DMA2D_FLAG_TW: Transfer Watermark flag - * @arg DMA2D_FLAG_TC: Transfer complete flag - * @arg DMA2D_FLAG_TE: Transfer error flag - * @retval The state of FLAG. - */ -#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** - * @brief Clear the DMA2D pending flags. - * @param __HANDLE__ DMA2D handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA2D_FLAG_CE: Configuration error flag - * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag - * @arg DMA2D_FLAG_CAE: CLUT access error flag - * @arg DMA2D_FLAG_TW: Transfer Watermark flag - * @arg DMA2D_FLAG_TC: Transfer complete flag - * @arg DMA2D_FLAG_TE: Transfer error flag - * @retval None - */ -#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__)) - -/** - * @brief Enable the specified DMA2D interrupts. - * @param __HANDLE__ DMA2D handle - * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DMA2D_IT_CE: Configuration error interrupt mask - * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask - * @arg DMA2D_IT_CAE: CLUT access error interrupt mask - * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask - * @arg DMA2D_IT_TC: Transfer complete interrupt mask - * @arg DMA2D_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified DMA2D interrupts. - * @param __HANDLE__ DMA2D handle - * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg DMA2D_IT_CE: Configuration error interrupt mask - * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask - * @arg DMA2D_IT_CAE: CLUT access error interrupt mask - * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask - * @arg DMA2D_IT_TC: Transfer complete interrupt mask - * @arg DMA2D_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified DMA2D interrupt source is enabled or not. - * @param __HANDLE__ DMA2D handle - * @param __INTERRUPT__ specifies the DMA2D interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA2D_IT_CE: Configuration error interrupt mask - * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask - * @arg DMA2D_IT_CAE: CLUT access error interrupt mask - * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask - * @arg DMA2D_IT_TC: Transfer complete interrupt mask - * @arg DMA2D_IT_TE: Transfer error interrupt mask - * @retval The state of INTERRUPT source. - */ -#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions - * @{ - */ - -/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions *******************************/ -HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d); -void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d); -void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d); -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, - pDMA2D_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ - -/** - * @} - */ - - -/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, - uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, - uint32_t DstAddress, uint32_t Width, uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, - uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, - uint32_t DstAddress, uint32_t Width, uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, - uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, - uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout); -void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d); -void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d); -void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d); - -/** - * @} - */ - -/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line); -HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime); - -/** - * @} - */ - -/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions - * @{ - */ - -/* Peripheral State functions ***************************************************/ -HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d); -uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d); - -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ - -/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants - * @{ - */ - -/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark - * @{ - */ -#define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */ -/** - * @} - */ - -/** @defgroup DMA2D_Color_Value DMA2D Color Value - * @{ - */ -#define DMA2D_COLOR_VALUE 0x000000FFU /*!< Color value mask */ -/** - * @} - */ - -/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers - * @{ - */ -#define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */ -/** - * @} - */ - -/** @defgroup DMA2D_Layers DMA2D Layers - * @{ - */ -#define DMA2D_BACKGROUND_LAYER 0x00000000U /*!< DMA2D Background Layer (layer 0) */ -#define DMA2D_FOREGROUND_LAYER 0x00000001U /*!< DMA2D Foreground Layer (layer 1) */ -/** - * @} - */ - -/** @defgroup DMA2D_Offset DMA2D Offset - * @{ - */ -#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< maximum Line Offset */ -/** - * @} - */ - -/** @defgroup DMA2D_Size DMA2D Size - * @{ - */ -#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D maximum number of pixels per line */ -#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D maximum number of lines */ -/** - * @} - */ - -/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size - * @{ - */ -#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D maximum CLUT size */ -/** - * @} - */ - -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Macros DMA2D Private Macros - * @{ - */ -#define IS_DMA2D_LAYER(LAYER) (((LAYER) == DMA2D_BACKGROUND_LAYER)\ - || ((LAYER) == DMA2D_FOREGROUND_LAYER)) - -#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \ - ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M)) - -#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || \ - ((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \ - ((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || \ - ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \ - ((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444)) - -#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE) -#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE) -#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL) -#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET) - -#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || \ - ((INPUT_CM) == DMA2D_INPUT_RGB888) || \ - ((INPUT_CM) == DMA2D_INPUT_RGB565) || \ - ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \ - ((INPUT_CM) == DMA2D_INPUT_ARGB4444) || \ - ((INPUT_CM) == DMA2D_INPUT_L8) || \ - ((INPUT_CM) == DMA2D_INPUT_AL44) || \ - ((INPUT_CM) == DMA2D_INPUT_AL88) || \ - ((INPUT_CM) == DMA2D_INPUT_L4) || \ - ((INPUT_CM) == DMA2D_INPUT_A8) || \ - ((INPUT_CM) == DMA2D_INPUT_A4)) - -#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \ - ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \ - ((AlphaMode) == DMA2D_COMBINE_ALPHA)) - - - - - -#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888)) -#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE) -#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX) -#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \ - ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \ - ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE)) -#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \ - ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \ - ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE)) -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (DMA2D) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_DMA2D_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h deleted file mode 100644 index 9858c74..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h +++ /dev/null @@ -1,102 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.h - * @author MCD Application Team - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_EX_H -#define __STM32F4xx_HAL_DMA_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Types DMAEx Exported Types - * @brief DMAEx Exported types - * @{ - */ - -/** - * @brief HAL DMA Memory definition - */ -typedef enum -{ - MEMORY0 = 0x00U, /*!< Memory 0 */ - MEMORY1 = 0x01U /*!< Memory 1 */ -}HAL_DMA_MemoryTypeDef; - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions - * @brief DMAEx Exported functions - * @{ - */ - -/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * @{ - */ - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); - -/** - * @} - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Functions DMAEx Private Functions - * @brief DMAEx Private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_HAL_DMA_EX_H*/ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h deleted file mode 100644 index 6da9668..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h +++ /dev/null @@ -1,1377 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dsi.h - * @author MCD Application Team - * @brief Header file of DSI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_DSI_H -#define STM32F4xx_HAL_DSI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined(DSI) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DSI DSI - * @brief DSI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DSI_Exported_Types DSI Exported Types - * @{ - */ -/** - * @brief DSI Init Structure definition - */ -typedef struct -{ - uint32_t AutomaticClockLaneControl; /*!< Automatic clock lane control - This parameter can be any value of @ref DSI_Automatic_Clk_Lane_Control */ - - uint32_t TXEscapeCkdiv; /*!< TX Escape clock division - The values 0 and 1 stop the TX_ESC clock generation */ - - uint32_t NumberOfLanes; /*!< Number of lanes - This parameter can be any value of @ref DSI_Number_Of_Lanes */ - -} DSI_InitTypeDef; - -/** - * @brief DSI PLL Clock structure definition - */ -typedef struct -{ - uint32_t PLLNDIV; /*!< PLL Loop Division Factor - This parameter must be a value between 10 and 125 */ - - uint32_t PLLIDF; /*!< PLL Input Division Factor - This parameter can be any value of @ref DSI_PLL_IDF */ - - uint32_t PLLODF; /*!< PLL Output Division Factor - This parameter can be any value of @ref DSI_PLL_ODF */ - -} DSI_PLLInitTypeDef; - -/** - * @brief DSI Video mode configuration - */ -typedef struct -{ - uint32_t VirtualChannelID; /*!< Virtual channel ID */ - - uint32_t ColorCoding; /*!< Color coding for LTDC interface - This parameter can be any value of @ref DSI_Color_Coding */ - - uint32_t LooselyPacked; /*!< Enable or disable loosely packed stream (needed only when using - 18-bit configuration). - This parameter can be any value of @ref DSI_LooselyPacked */ - - uint32_t Mode; /*!< Video mode type - This parameter can be any value of @ref DSI_Video_Mode_Type */ - - uint32_t PacketSize; /*!< Video packet size */ - - uint32_t NumberOfChunks; /*!< Number of chunks */ - - uint32_t NullPacketSize; /*!< Null packet size */ - - uint32_t HSPolarity; /*!< HSYNC pin polarity - This parameter can be any value of @ref DSI_HSYNC_Polarity */ - - uint32_t VSPolarity; /*!< VSYNC pin polarity - This parameter can be any value of @ref DSI_VSYNC_Active_Polarity */ - - uint32_t DEPolarity; /*!< Data Enable pin polarity - This parameter can be any value of @ref DSI_DATA_ENABLE_Polarity */ - - uint32_t HorizontalSyncActive; /*!< Horizontal synchronism active duration (in lane byte clock cycles) */ - - uint32_t HorizontalBackPorch; /*!< Horizontal back-porch duration (in lane byte clock cycles) */ - - uint32_t HorizontalLine; /*!< Horizontal line duration (in lane byte clock cycles) */ - - uint32_t VerticalSyncActive; /*!< Vertical synchronism active duration */ - - uint32_t VerticalBackPorch; /*!< Vertical back-porch duration */ - - uint32_t VerticalFrontPorch; /*!< Vertical front-porch duration */ - - uint32_t VerticalActive; /*!< Vertical active duration */ - - uint32_t LPCommandEnable; /*!< Low-power command enable - This parameter can be any value of @ref DSI_LP_Command */ - - uint32_t LPLargestPacketSize; /*!< The size, in bytes, of the low power largest packet that - can fit in a line during VSA, VBP and VFP regions */ - - uint32_t LPVACTLargestPacketSize; /*!< The size, in bytes, of the low power largest packet that - can fit in a line during VACT region */ - - uint32_t LPHorizontalFrontPorchEnable; /*!< Low-power horizontal front-porch enable - This parameter can be any value of @ref DSI_LP_HFP */ - - uint32_t LPHorizontalBackPorchEnable; /*!< Low-power horizontal back-porch enable - This parameter can be any value of @ref DSI_LP_HBP */ - - uint32_t LPVerticalActiveEnable; /*!< Low-power vertical active enable - This parameter can be any value of @ref DSI_LP_VACT */ - - uint32_t LPVerticalFrontPorchEnable; /*!< Low-power vertical front-porch enable - This parameter can be any value of @ref DSI_LP_VFP */ - - uint32_t LPVerticalBackPorchEnable; /*!< Low-power vertical back-porch enable - This parameter can be any value of @ref DSI_LP_VBP */ - - uint32_t LPVerticalSyncActiveEnable; /*!< Low-power vertical sync active enable - This parameter can be any value of @ref DSI_LP_VSYNC */ - - uint32_t FrameBTAAcknowledgeEnable; /*!< Frame bus-turn-around acknowledge enable - This parameter can be any value of @ref DSI_FBTA_acknowledge */ - -} DSI_VidCfgTypeDef; - -/** - * @brief DSI Adapted command mode configuration - */ -typedef struct -{ - uint32_t VirtualChannelID; /*!< Virtual channel ID */ - - uint32_t ColorCoding; /*!< Color coding for LTDC interface - This parameter can be any value of @ref DSI_Color_Coding */ - - uint32_t CommandSize; /*!< Maximum allowed size for an LTDC write memory command, measured in - pixels. This parameter can be any value between 0x00 and 0xFFFFU */ - - uint32_t TearingEffectSource; /*!< Tearing effect source - This parameter can be any value of @ref DSI_TearingEffectSource */ - - uint32_t TearingEffectPolarity; /*!< Tearing effect pin polarity - This parameter can be any value of @ref DSI_TearingEffectPolarity */ - - uint32_t HSPolarity; /*!< HSYNC pin polarity - This parameter can be any value of @ref DSI_HSYNC_Polarity */ - - uint32_t VSPolarity; /*!< VSYNC pin polarity - This parameter can be any value of @ref DSI_VSYNC_Active_Polarity */ - - uint32_t DEPolarity; /*!< Data Enable pin polarity - This parameter can be any value of @ref DSI_DATA_ENABLE_Polarity */ - - uint32_t VSyncPol; /*!< VSync edge on which the LTDC is halted - This parameter can be any value of @ref DSI_Vsync_Polarity */ - - uint32_t AutomaticRefresh; /*!< Automatic refresh mode - This parameter can be any value of @ref DSI_AutomaticRefresh */ - - uint32_t TEAcknowledgeRequest; /*!< Tearing Effect Acknowledge Request Enable - This parameter can be any value of @ref DSI_TE_AcknowledgeRequest */ - -} DSI_CmdCfgTypeDef; - -/** - * @brief DSI command transmission mode configuration - */ -typedef struct -{ - uint32_t LPGenShortWriteNoP; /*!< Generic Short Write Zero parameters Transmission - This parameter can be any value of @ref DSI_LP_LPGenShortWriteNoP */ - - uint32_t LPGenShortWriteOneP; /*!< Generic Short Write One parameter Transmission - This parameter can be any value of @ref DSI_LP_LPGenShortWriteOneP */ - - uint32_t LPGenShortWriteTwoP; /*!< Generic Short Write Two parameters Transmission - This parameter can be any value of @ref DSI_LP_LPGenShortWriteTwoP */ - - uint32_t LPGenShortReadNoP; /*!< Generic Short Read Zero parameters Transmission - This parameter can be any value of @ref DSI_LP_LPGenShortReadNoP */ - - uint32_t LPGenShortReadOneP; /*!< Generic Short Read One parameter Transmission - This parameter can be any value of @ref DSI_LP_LPGenShortReadOneP */ - - uint32_t LPGenShortReadTwoP; /*!< Generic Short Read Two parameters Transmission - This parameter can be any value of @ref DSI_LP_LPGenShortReadTwoP */ - - uint32_t LPGenLongWrite; /*!< Generic Long Write Transmission - This parameter can be any value of @ref DSI_LP_LPGenLongWrite */ - - uint32_t LPDcsShortWriteNoP; /*!< DCS Short Write Zero parameters Transmission - This parameter can be any value of @ref DSI_LP_LPDcsShortWriteNoP */ - - uint32_t LPDcsShortWriteOneP; /*!< DCS Short Write One parameter Transmission - This parameter can be any value of @ref DSI_LP_LPDcsShortWriteOneP */ - - uint32_t LPDcsShortReadNoP; /*!< DCS Short Read Zero parameters Transmission - This parameter can be any value of @ref DSI_LP_LPDcsShortReadNoP */ - - uint32_t LPDcsLongWrite; /*!< DCS Long Write Transmission - This parameter can be any value of @ref DSI_LP_LPDcsLongWrite */ - - uint32_t LPMaxReadPacket; /*!< Maximum Read Packet Size Transmission - This parameter can be any value of @ref DSI_LP_LPMaxReadPacket */ - - uint32_t AcknowledgeRequest; /*!< Acknowledge Request Enable - This parameter can be any value of @ref DSI_AcknowledgeRequest */ - -} DSI_LPCmdTypeDef; - -/** - * @brief DSI PHY Timings definition - */ -typedef struct -{ - uint32_t ClockLaneHS2LPTime; /*!< The maximum time that the D-PHY clock lane takes to go from high-speed - to low-power transmission */ - - uint32_t ClockLaneLP2HSTime; /*!< The maximum time that the D-PHY clock lane takes to go from low-power - to high-speed transmission */ - - uint32_t DataLaneHS2LPTime; /*!< The maximum time that the D-PHY data lanes takes to go from high-speed - to low-power transmission */ - - uint32_t DataLaneLP2HSTime; /*!< The maximum time that the D-PHY data lanes takes to go from low-power - to high-speed transmission */ - - uint32_t DataLaneMaxReadTime; /*!< The maximum time required to perform a read command */ - - uint32_t StopWaitTime; /*!< The minimum wait period to request a High-Speed transmission after the - Stop state */ - -} DSI_PHY_TimerTypeDef; - -/** - * @brief DSI HOST Timeouts definition - */ -typedef struct -{ - uint32_t TimeoutCkdiv; /*!< Time-out clock division */ - - uint32_t HighSpeedTransmissionTimeout; /*!< High-speed transmission time-out */ - - uint32_t LowPowerReceptionTimeout; /*!< Low-power reception time-out */ - - uint32_t HighSpeedReadTimeout; /*!< High-speed read time-out */ - - uint32_t LowPowerReadTimeout; /*!< Low-power read time-out */ - - uint32_t HighSpeedWriteTimeout; /*!< High-speed write time-out */ - - uint32_t HighSpeedWritePrespMode; /*!< High-speed write presp mode - This parameter can be any value of @ref DSI_HS_PrespMode */ - - uint32_t LowPowerWriteTimeout; /*!< Low-speed write time-out */ - - uint32_t BTATimeout; /*!< BTA time-out */ - -} DSI_HOST_TimeoutTypeDef; - -/** - * @brief DSI States Structure definition - */ -typedef enum -{ - HAL_DSI_STATE_RESET = 0x00U, - HAL_DSI_STATE_READY = 0x01U, - HAL_DSI_STATE_ERROR = 0x02U, - HAL_DSI_STATE_BUSY = 0x03U, - HAL_DSI_STATE_TIMEOUT = 0x04U -} HAL_DSI_StateTypeDef; - -/** - * @brief DSI Handle Structure definition - */ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) -typedef struct __DSI_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ -{ - DSI_TypeDef *Instance; /*!< Register base address */ - DSI_InitTypeDef Init; /*!< DSI required parameters */ - HAL_LockTypeDef Lock; /*!< DSI peripheral status */ - __IO HAL_DSI_StateTypeDef State; /*!< DSI communication state */ - __IO uint32_t ErrorCode; /*!< DSI Error code */ - uint32_t ErrorMsk; /*!< DSI Error monitoring mask */ - -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) - void (* TearingEffectCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Tearing Effect Callback */ - void (* EndOfRefreshCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI End Of Refresh Callback */ - void (* ErrorCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Error Callback */ - - void (* MspInitCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Msp Init callback */ - void (* MspDeInitCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Msp DeInit callback */ - -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - -} DSI_HandleTypeDef; - -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) -/** - * @brief HAL DSI Callback ID enumeration definition - */ -typedef enum -{ - HAL_DSI_MSPINIT_CB_ID = 0x00U, /*!< DSI MspInit callback ID */ - HAL_DSI_MSPDEINIT_CB_ID = 0x01U, /*!< DSI MspDeInit callback ID */ - - HAL_DSI_TEARING_EFFECT_CB_ID = 0x02U, /*!< DSI Tearing Effect Callback ID */ - HAL_DSI_ENDOF_REFRESH_CB_ID = 0x03U, /*!< DSI End Of Refresh Callback ID */ - HAL_DSI_ERROR_CB_ID = 0x04U /*!< DSI Error Callback ID */ - -} HAL_DSI_CallbackIDTypeDef; - -/** - * @brief HAL DSI Callback pointer definition - */ -typedef void (*pDSI_CallbackTypeDef)(DSI_HandleTypeDef *hdsi); /*!< pointer to an DSI callback function */ - -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DSI_Exported_Constants DSI Exported Constants - * @{ - */ -/** @defgroup DSI_DCS_Command DSI DCS Command - * @{ - */ -#define DSI_ENTER_IDLE_MODE 0x39U -#define DSI_ENTER_INVERT_MODE 0x21U -#define DSI_ENTER_NORMAL_MODE 0x13U -#define DSI_ENTER_PARTIAL_MODE 0x12U -#define DSI_ENTER_SLEEP_MODE 0x10U -#define DSI_EXIT_IDLE_MODE 0x38U -#define DSI_EXIT_INVERT_MODE 0x20U -#define DSI_EXIT_SLEEP_MODE 0x11U -#define DSI_GET_3D_CONTROL 0x3FU -#define DSI_GET_ADDRESS_MODE 0x0BU -#define DSI_GET_BLUE_CHANNEL 0x08U -#define DSI_GET_DIAGNOSTIC_RESULT 0x0FU -#define DSI_GET_DISPLAY_MODE 0x0DU -#define DSI_GET_GREEN_CHANNEL 0x07U -#define DSI_GET_PIXEL_FORMAT 0x0CU -#define DSI_GET_POWER_MODE 0x0AU -#define DSI_GET_RED_CHANNEL 0x06U -#define DSI_GET_SCANLINE 0x45U -#define DSI_GET_SIGNAL_MODE 0x0EU -#define DSI_NOP 0x00U -#define DSI_READ_DDB_CONTINUE 0xA8U -#define DSI_READ_DDB_START 0xA1U -#define DSI_READ_MEMORY_CONTINUE 0x3EU -#define DSI_READ_MEMORY_START 0x2EU -#define DSI_SET_3D_CONTROL 0x3DU -#define DSI_SET_ADDRESS_MODE 0x36U -#define DSI_SET_COLUMN_ADDRESS 0x2AU -#define DSI_SET_DISPLAY_OFF 0x28U -#define DSI_SET_DISPLAY_ON 0x29U -#define DSI_SET_GAMMA_CURVE 0x26U -#define DSI_SET_PAGE_ADDRESS 0x2BU -#define DSI_SET_PARTIAL_COLUMNS 0x31U -#define DSI_SET_PARTIAL_ROWS 0x30U -#define DSI_SET_PIXEL_FORMAT 0x3AU -#define DSI_SET_SCROLL_AREA 0x33U -#define DSI_SET_SCROLL_START 0x37U -#define DSI_SET_TEAR_OFF 0x34U -#define DSI_SET_TEAR_ON 0x35U -#define DSI_SET_TEAR_SCANLINE 0x44U -#define DSI_SET_VSYNC_TIMING 0x40U -#define DSI_SOFT_RESET 0x01U -#define DSI_WRITE_LUT 0x2DU -#define DSI_WRITE_MEMORY_CONTINUE 0x3CU -#define DSI_WRITE_MEMORY_START 0x2CU -/** - * @} - */ - -/** @defgroup DSI_Video_Mode_Type DSI Video Mode Type - * @{ - */ -#define DSI_VID_MODE_NB_PULSES 0U -#define DSI_VID_MODE_NB_EVENTS 1U -#define DSI_VID_MODE_BURST 2U -/** - * @} - */ - -/** @defgroup DSI_Color_Mode DSI Color Mode - * @{ - */ -#define DSI_COLOR_MODE_FULL 0x00000000U -#define DSI_COLOR_MODE_EIGHT DSI_WCR_COLM -/** - * @} - */ - -/** @defgroup DSI_ShutDown DSI ShutDown - * @{ - */ -#define DSI_DISPLAY_ON 0x00000000U -#define DSI_DISPLAY_OFF DSI_WCR_SHTDN -/** - * @} - */ - -/** @defgroup DSI_LP_Command DSI LP Command - * @{ - */ -#define DSI_LP_COMMAND_DISABLE 0x00000000U -#define DSI_LP_COMMAND_ENABLE DSI_VMCR_LPCE -/** - * @} - */ - -/** @defgroup DSI_LP_HFP DSI LP HFP - * @{ - */ -#define DSI_LP_HFP_DISABLE 0x00000000U -#define DSI_LP_HFP_ENABLE DSI_VMCR_LPHFPE -/** - * @} - */ - -/** @defgroup DSI_LP_HBP DSI LP HBP - * @{ - */ -#define DSI_LP_HBP_DISABLE 0x00000000U -#define DSI_LP_HBP_ENABLE DSI_VMCR_LPHBPE -/** - * @} - */ - -/** @defgroup DSI_LP_VACT DSI LP VACT - * @{ - */ -#define DSI_LP_VACT_DISABLE 0x00000000U -#define DSI_LP_VACT_ENABLE DSI_VMCR_LPVAE -/** - * @} - */ - -/** @defgroup DSI_LP_VFP DSI LP VFP - * @{ - */ -#define DSI_LP_VFP_DISABLE 0x00000000U -#define DSI_LP_VFP_ENABLE DSI_VMCR_LPVFPE -/** - * @} - */ - -/** @defgroup DSI_LP_VBP DSI LP VBP - * @{ - */ -#define DSI_LP_VBP_DISABLE 0x00000000U -#define DSI_LP_VBP_ENABLE DSI_VMCR_LPVBPE -/** - * @} - */ - -/** @defgroup DSI_LP_VSYNC DSI LP VSYNC - * @{ - */ -#define DSI_LP_VSYNC_DISABLE 0x00000000U -#define DSI_LP_VSYNC_ENABLE DSI_VMCR_LPVSAE -/** - * @} - */ - -/** @defgroup DSI_FBTA_acknowledge DSI FBTA Acknowledge - * @{ - */ -#define DSI_FBTAA_DISABLE 0x00000000U -#define DSI_FBTAA_ENABLE DSI_VMCR_FBTAAE -/** - * @} - */ - -/** @defgroup DSI_TearingEffectSource DSI Tearing Effect Source - * @{ - */ -#define DSI_TE_DSILINK 0x00000000U -#define DSI_TE_EXTERNAL DSI_WCFGR_TESRC -/** - * @} - */ - -/** @defgroup DSI_TearingEffectPolarity DSI Tearing Effect Polarity - * @{ - */ -#define DSI_TE_RISING_EDGE 0x00000000U -#define DSI_TE_FALLING_EDGE DSI_WCFGR_TEPOL -/** - * @} - */ - -/** @defgroup DSI_Vsync_Polarity DSI Vsync Polarity - * @{ - */ -#define DSI_VSYNC_FALLING 0x00000000U -#define DSI_VSYNC_RISING DSI_WCFGR_VSPOL -/** - * @} - */ - -/** @defgroup DSI_AutomaticRefresh DSI Automatic Refresh - * @{ - */ -#define DSI_AR_DISABLE 0x00000000U -#define DSI_AR_ENABLE DSI_WCFGR_AR -/** - * @} - */ - -/** @defgroup DSI_TE_AcknowledgeRequest DSI TE Acknowledge Request - * @{ - */ -#define DSI_TE_ACKNOWLEDGE_DISABLE 0x00000000U -#define DSI_TE_ACKNOWLEDGE_ENABLE DSI_CMCR_TEARE -/** - * @} - */ - -/** @defgroup DSI_AcknowledgeRequest DSI Acknowledge Request - * @{ - */ -#define DSI_ACKNOWLEDGE_DISABLE 0x00000000U -#define DSI_ACKNOWLEDGE_ENABLE DSI_CMCR_ARE -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenShortWriteNoP DSI LP LPGen Short Write NoP - * @{ - */ -#define DSI_LP_GSW0P_DISABLE 0x00000000U -#define DSI_LP_GSW0P_ENABLE DSI_CMCR_GSW0TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenShortWriteOneP DSI LP LPGen Short Write OneP - * @{ - */ -#define DSI_LP_GSW1P_DISABLE 0x00000000U -#define DSI_LP_GSW1P_ENABLE DSI_CMCR_GSW1TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenShortWriteTwoP DSI LP LPGen Short Write TwoP - * @{ - */ -#define DSI_LP_GSW2P_DISABLE 0x00000000U -#define DSI_LP_GSW2P_ENABLE DSI_CMCR_GSW2TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenShortReadNoP DSI LP LPGen Short Read NoP - * @{ - */ -#define DSI_LP_GSR0P_DISABLE 0x00000000U -#define DSI_LP_GSR0P_ENABLE DSI_CMCR_GSR0TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenShortReadOneP DSI LP LPGen Short Read OneP - * @{ - */ -#define DSI_LP_GSR1P_DISABLE 0x00000000U -#define DSI_LP_GSR1P_ENABLE DSI_CMCR_GSR1TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenShortReadTwoP DSI LP LPGen Short Read TwoP - * @{ - */ -#define DSI_LP_GSR2P_DISABLE 0x00000000U -#define DSI_LP_GSR2P_ENABLE DSI_CMCR_GSR2TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPGenLongWrite DSI LP LPGen LongWrite - * @{ - */ -#define DSI_LP_GLW_DISABLE 0x00000000U -#define DSI_LP_GLW_ENABLE DSI_CMCR_GLWTX -/** - * @} - */ - -/** @defgroup DSI_LP_LPDcsShortWriteNoP DSI LP LPDcs Short Write NoP - * @{ - */ -#define DSI_LP_DSW0P_DISABLE 0x00000000U -#define DSI_LP_DSW0P_ENABLE DSI_CMCR_DSW0TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPDcsShortWriteOneP DSI LP LPDcs Short Write OneP - * @{ - */ -#define DSI_LP_DSW1P_DISABLE 0x00000000U -#define DSI_LP_DSW1P_ENABLE DSI_CMCR_DSW1TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPDcsShortReadNoP DSI LP LPDcs Short Read NoP - * @{ - */ -#define DSI_LP_DSR0P_DISABLE 0x00000000U -#define DSI_LP_DSR0P_ENABLE DSI_CMCR_DSR0TX -/** - * @} - */ - -/** @defgroup DSI_LP_LPDcsLongWrite DSI LP LPDcs Long Write - * @{ - */ -#define DSI_LP_DLW_DISABLE 0x00000000U -#define DSI_LP_DLW_ENABLE DSI_CMCR_DLWTX -/** - * @} - */ - -/** @defgroup DSI_LP_LPMaxReadPacket DSI LP LPMax Read Packet - * @{ - */ -#define DSI_LP_MRDP_DISABLE 0x00000000U -#define DSI_LP_MRDP_ENABLE DSI_CMCR_MRDPS -/** - * @} - */ - -/** @defgroup DSI_HS_PrespMode DSI HS Presp Mode - * @{ - */ -#define DSI_HS_PM_DISABLE 0x00000000U -#define DSI_HS_PM_ENABLE DSI_TCCR3_PM -/** - * @} - */ - - -/** @defgroup DSI_Automatic_Clk_Lane_Control DSI Automatic Clk Lane Control - * @{ - */ -#define DSI_AUTO_CLK_LANE_CTRL_DISABLE 0x00000000U -#define DSI_AUTO_CLK_LANE_CTRL_ENABLE DSI_CLCR_ACR -/** - * @} - */ - -/** @defgroup DSI_Number_Of_Lanes DSI Number Of Lanes - * @{ - */ -#define DSI_ONE_DATA_LANE 0U -#define DSI_TWO_DATA_LANES 1U -/** - * @} - */ - -/** @defgroup DSI_FlowControl DSI Flow Control - * @{ - */ -#define DSI_FLOW_CONTROL_CRC_RX DSI_PCR_CRCRXE -#define DSI_FLOW_CONTROL_ECC_RX DSI_PCR_ECCRXE -#define DSI_FLOW_CONTROL_BTA DSI_PCR_BTAE -#define DSI_FLOW_CONTROL_EOTP_RX DSI_PCR_ETRXE -#define DSI_FLOW_CONTROL_EOTP_TX DSI_PCR_ETTXE -#define DSI_FLOW_CONTROL_ALL (DSI_FLOW_CONTROL_CRC_RX | DSI_FLOW_CONTROL_ECC_RX | \ - DSI_FLOW_CONTROL_BTA | DSI_FLOW_CONTROL_EOTP_RX | \ - DSI_FLOW_CONTROL_EOTP_TX) -/** - * @} - */ - -/** @defgroup DSI_Color_Coding DSI Color Coding - * @{ - */ -#define DSI_RGB565 0x00000000U /*!< The values 0x00000001 and 0x00000002 can also be used for the RGB565 color mode configuration */ -#define DSI_RGB666 0x00000003U /*!< The value 0x00000004 can also be used for the RGB666 color mode configuration */ -#define DSI_RGB888 0x00000005U -/** - * @} - */ - -/** @defgroup DSI_LooselyPacked DSI Loosely Packed - * @{ - */ -#define DSI_LOOSELY_PACKED_ENABLE DSI_LCOLCR_LPE -#define DSI_LOOSELY_PACKED_DISABLE 0x00000000U -/** - * @} - */ - -/** @defgroup DSI_HSYNC_Polarity DSI HSYNC Polarity - * @{ - */ -#define DSI_HSYNC_ACTIVE_HIGH 0x00000000U -#define DSI_HSYNC_ACTIVE_LOW DSI_LPCR_HSP -/** - * @} - */ - -/** @defgroup DSI_VSYNC_Active_Polarity DSI VSYNC Active Polarity - * @{ - */ -#define DSI_VSYNC_ACTIVE_HIGH 0x00000000U -#define DSI_VSYNC_ACTIVE_LOW DSI_LPCR_VSP -/** - * @} - */ - -/** @defgroup DSI_DATA_ENABLE_Polarity DSI DATA ENABLE Polarity - * @{ - */ -#define DSI_DATA_ENABLE_ACTIVE_HIGH 0x00000000U -#define DSI_DATA_ENABLE_ACTIVE_LOW DSI_LPCR_DEP -/** - * @} - */ - -/** @defgroup DSI_PLL_IDF DSI PLL IDF - * @{ - */ -#define DSI_PLL_IN_DIV1 0x00000001U -#define DSI_PLL_IN_DIV2 0x00000002U -#define DSI_PLL_IN_DIV3 0x00000003U -#define DSI_PLL_IN_DIV4 0x00000004U -#define DSI_PLL_IN_DIV5 0x00000005U -#define DSI_PLL_IN_DIV6 0x00000006U -#define DSI_PLL_IN_DIV7 0x00000007U -/** - * @} - */ - -/** @defgroup DSI_PLL_ODF DSI PLL ODF - * @{ - */ -#define DSI_PLL_OUT_DIV1 0x00000000U -#define DSI_PLL_OUT_DIV2 0x00000001U -#define DSI_PLL_OUT_DIV4 0x00000002U -#define DSI_PLL_OUT_DIV8 0x00000003U -/** - * @} - */ - -/** @defgroup DSI_Flags DSI Flags - * @{ - */ -#define DSI_FLAG_TE DSI_WISR_TEIF -#define DSI_FLAG_ER DSI_WISR_ERIF -#define DSI_FLAG_BUSY DSI_WISR_BUSY -#define DSI_FLAG_PLLLS DSI_WISR_PLLLS -#define DSI_FLAG_PLLL DSI_WISR_PLLLIF -#define DSI_FLAG_PLLU DSI_WISR_PLLUIF -#define DSI_FLAG_RRS DSI_WISR_RRS -#define DSI_FLAG_RR DSI_WISR_RRIF -/** - * @} - */ - -/** @defgroup DSI_Interrupts DSI Interrupts - * @{ - */ -#define DSI_IT_TE DSI_WIER_TEIE -#define DSI_IT_ER DSI_WIER_ERIE -#define DSI_IT_PLLL DSI_WIER_PLLLIE -#define DSI_IT_PLLU DSI_WIER_PLLUIE -#define DSI_IT_RR DSI_WIER_RRIE -/** - * @} - */ - -/** @defgroup DSI_SHORT_WRITE_PKT_Data_Type DSI SHORT WRITE PKT Data Type - * @{ - */ -#define DSI_DCS_SHORT_PKT_WRITE_P0 0x00000005U /*!< DCS short write, no parameters */ -#define DSI_DCS_SHORT_PKT_WRITE_P1 0x00000015U /*!< DCS short write, one parameter */ -#define DSI_GEN_SHORT_PKT_WRITE_P0 0x00000003U /*!< Generic short write, no parameters */ -#define DSI_GEN_SHORT_PKT_WRITE_P1 0x00000013U /*!< Generic short write, one parameter */ -#define DSI_GEN_SHORT_PKT_WRITE_P2 0x00000023U /*!< Generic short write, two parameters */ -/** - * @} - */ - -/** @defgroup DSI_LONG_WRITE_PKT_Data_Type DSI LONG WRITE PKT Data Type - * @{ - */ -#define DSI_DCS_LONG_PKT_WRITE 0x00000039U /*!< DCS long write */ -#define DSI_GEN_LONG_PKT_WRITE 0x00000029U /*!< Generic long write */ -/** - * @} - */ - -/** @defgroup DSI_SHORT_READ_PKT_Data_Type DSI SHORT READ PKT Data Type - * @{ - */ -#define DSI_DCS_SHORT_PKT_READ 0x00000006U /*!< DCS short read */ -#define DSI_GEN_SHORT_PKT_READ_P0 0x00000004U /*!< Generic short read, no parameters */ -#define DSI_GEN_SHORT_PKT_READ_P1 0x00000014U /*!< Generic short read, one parameter */ -#define DSI_GEN_SHORT_PKT_READ_P2 0x00000024U /*!< Generic short read, two parameters */ -/** - * @} - */ - -/** @defgroup DSI_Error_Data_Type DSI Error Data Type - * @{ - */ -#define HAL_DSI_ERROR_NONE 0U -#define HAL_DSI_ERROR_ACK 0x00000001U /*!< Acknowledge errors */ -#define HAL_DSI_ERROR_PHY 0x00000002U /*!< PHY related errors */ -#define HAL_DSI_ERROR_TX 0x00000004U /*!< Transmission error */ -#define HAL_DSI_ERROR_RX 0x00000008U /*!< Reception error */ -#define HAL_DSI_ERROR_ECC 0x00000010U /*!< ECC errors */ -#define HAL_DSI_ERROR_CRC 0x00000020U /*!< CRC error */ -#define HAL_DSI_ERROR_PSE 0x00000040U /*!< Packet Size error */ -#define HAL_DSI_ERROR_EOT 0x00000080U /*!< End Of Transmission error */ -#define HAL_DSI_ERROR_OVF 0x00000100U /*!< FIFO overflow error */ -#define HAL_DSI_ERROR_GEN 0x00000200U /*!< Generic FIFO related errors */ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) -#define HAL_DSI_ERROR_INVALID_CALLBACK 0x00000400U /*!< DSI Invalid Callback error */ -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup DSI_Lane_Group DSI Lane Group - * @{ - */ -#define DSI_CLOCK_LANE 0x00000000U -#define DSI_DATA_LANES 0x00000001U -/** - * @} - */ - -/** @defgroup DSI_Communication_Delay DSI Communication Delay - * @{ - */ -#define DSI_SLEW_RATE_HSTX 0x00000000U -#define DSI_SLEW_RATE_LPTX 0x00000001U -#define DSI_HS_DELAY 0x00000002U -/** - * @} - */ - -/** @defgroup DSI_CustomLane DSI CustomLane - * @{ - */ -#define DSI_SWAP_LANE_PINS 0x00000000U -#define DSI_INVERT_HS_SIGNAL 0x00000001U -/** - * @} - */ - -/** @defgroup DSI_Lane_Select DSI Lane Select - * @{ - */ -#define DSI_CLK_LANE 0x00000000U -#define DSI_DATA_LANE0 0x00000001U -#define DSI_DATA_LANE1 0x00000002U -/** - * @} - */ - -/** @defgroup DSI_PHY_Timing DSI PHY Timing - * @{ - */ -#define DSI_TCLK_POST 0x00000000U -#define DSI_TLPX_CLK 0x00000001U -#define DSI_THS_EXIT 0x00000002U -#define DSI_TLPX_DATA 0x00000003U -#define DSI_THS_ZERO 0x00000004U -#define DSI_THS_TRAIL 0x00000005U -#define DSI_THS_PREPARE 0x00000006U -#define DSI_TCLK_ZERO 0x00000007U -#define DSI_TCLK_PREPARE 0x00000008U -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup DSI_Exported_Macros DSI Exported Macros - * @{ - */ - -/** - * @brief Reset DSI handle state. - * @param __HANDLE__ DSI handle - * @retval None - */ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) -#define __HAL_DSI_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_DSI_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_DSI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DSI_STATE_RESET) -#endif /*USE_HAL_DSI_REGISTER_CALLBACKS */ - -/** - * @brief Enables the DSI host. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_ENABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ - /* Delay after an DSI Host enabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Disables the DSI host. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_DISABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - CLEAR_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ - /* Delay after an DSI Host disabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Enables the DSI wrapper. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_WRAPPER_ENABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ - /* Delay after an DSI warpper enabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Disable the DSI wrapper. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_WRAPPER_DISABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - CLEAR_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ - /* Delay after an DSI warpper disabling*/ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Enables the DSI PLL. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_PLL_ENABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ - /* Delay after an DSI PLL enabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Disables the DSI PLL. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_PLL_DISABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - CLEAR_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ - /* Delay after an DSI PLL disabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Enables the DSI regulator. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_REG_ENABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ - /* Delay after an DSI regulator enabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Disables the DSI regulator. - * @param __HANDLE__ DSI handle - * @retval None. - */ -#define __HAL_DSI_REG_DISABLE(__HANDLE__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - CLEAR_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ - /* Delay after an DSI regulator disabling */ \ - tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ - UNUSED(tmpreg); \ - } while(0U) - -/** - * @brief Get the DSI pending flags. - * @param __HANDLE__ DSI handle. - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DSI_FLAG_TE : Tearing Effect Interrupt Flag - * @arg DSI_FLAG_ER : End of Refresh Interrupt Flag - * @arg DSI_FLAG_BUSY : Busy Flag - * @arg DSI_FLAG_PLLLS: PLL Lock Status - * @arg DSI_FLAG_PLLL : PLL Lock Interrupt Flag - * @arg DSI_FLAG_PLLU : PLL Unlock Interrupt Flag - * @arg DSI_FLAG_RRS : Regulator Ready Flag - * @arg DSI_FLAG_RR : Regulator Ready Interrupt Flag - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DSI_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WISR & (__FLAG__)) - -/** - * @brief Clears the DSI pending flags. - * @param __HANDLE__ DSI handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DSI_FLAG_TE : Tearing Effect Interrupt Flag - * @arg DSI_FLAG_ER : End of Refresh Interrupt Flag - * @arg DSI_FLAG_PLLL : PLL Lock Interrupt Flag - * @arg DSI_FLAG_PLLU : PLL Unlock Interrupt Flag - * @arg DSI_FLAG_RR : Regulator Ready Interrupt Flag - * @retval None - */ -#define __HAL_DSI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WIFCR = (__FLAG__)) - -/** - * @brief Enables the specified DSI interrupts. - * @param __HANDLE__ DSI handle. - * @param __INTERRUPT__ specifies the DSI interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DSI_IT_TE : Tearing Effect Interrupt - * @arg DSI_IT_ER : End of Refresh Interrupt - * @arg DSI_IT_PLLL: PLL Lock Interrupt - * @arg DSI_IT_PLLU: PLL Unlock Interrupt - * @arg DSI_IT_RR : Regulator Ready Interrupt - * @retval None - */ -#define __HAL_DSI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER |= (__INTERRUPT__)) - -/** - * @brief Disables the specified DSI interrupts. - * @param __HANDLE__ DSI handle - * @param __INTERRUPT__ specifies the DSI interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg DSI_IT_TE : Tearing Effect Interrupt - * @arg DSI_IT_ER : End of Refresh Interrupt - * @arg DSI_IT_PLLL: PLL Lock Interrupt - * @arg DSI_IT_PLLU: PLL Unlock Interrupt - * @arg DSI_IT_RR : Regulator Ready Interrupt - * @retval None - */ -#define __HAL_DSI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified DSI interrupt source is enabled or not. - * @param __HANDLE__ DSI handle - * @param __INTERRUPT__ specifies the DSI interrupt source to check. - * This parameter can be one of the following values: - * @arg DSI_IT_TE : Tearing Effect Interrupt - * @arg DSI_IT_ER : End of Refresh Interrupt - * @arg DSI_IT_PLLL: PLL Lock Interrupt - * @arg DSI_IT_PLLU: PLL Unlock Interrupt - * @arg DSI_IT_RR : Regulator Ready Interrupt - * @retval The state of INTERRUPT (SET or RESET). - */ -#define __HAL_DSI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER & (__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DSI_Exported_Functions DSI Exported Functions - * @{ - */ -/** @defgroup DSI_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * @{ - */ -HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit); -HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi); -void HAL_DSI_MspInit(DSI_HandleTypeDef *hdsi); -void HAL_DSI_MspDeInit(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors); -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_DSI_RegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID, - pDSI_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DSI_UnRegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup DSI_Group2 IO operation functions - * @brief IO operation functions - * @{ - */ -void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi); -void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi); -void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi); -void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi); -/** - * @} - */ - -/** @defgroup DSI_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID); -HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg); -HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg); -HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd); -HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl); -HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers); -HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts); -HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode); -HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown); -HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi, - uint32_t ChannelID, - uint32_t Mode, - uint32_t Param1, - uint32_t Param2); -HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi, - uint32_t ChannelID, - uint32_t Mode, - uint32_t NbParams, - uint32_t Param1, - uint8_t *ParametersTable); -HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi, - uint32_t ChannelNbr, - uint8_t *Array, - uint32_t Size, - uint32_t Mode, - uint32_t DCSCmd, - uint8_t *ParametersTable); -HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi); -HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi); - -HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation); -HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi); - -HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, - uint32_t Value); -HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency); -HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State); -HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, - FunctionalState State); -HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, - uint32_t Value); -HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State); -HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State); -HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State); -HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State); -HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State); - -/** - * @} - */ - -/** @defgroup DSI_Group4 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * @{ - */ -uint32_t HAL_DSI_GetError(DSI_HandleTypeDef *hdsi); -HAL_DSI_StateTypeDef HAL_DSI_GetState(DSI_HandleTypeDef *hdsi); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DSI_Private_Constants DSI Private Constants - * @{ - */ -#define DSI_MAX_RETURN_PKT_SIZE (0x00000037U) /*!< Maximum return packet configuration */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DSI_Private_Macros DSI Private Macros - * @{ - */ -#define IS_DSI_PLL_NDIV(NDIV) ((10U <= (NDIV)) && ((NDIV) <= 125U)) -#define IS_DSI_PLL_IDF(IDF) (((IDF) == DSI_PLL_IN_DIV1) || \ - ((IDF) == DSI_PLL_IN_DIV2) || \ - ((IDF) == DSI_PLL_IN_DIV3) || \ - ((IDF) == DSI_PLL_IN_DIV4) || \ - ((IDF) == DSI_PLL_IN_DIV5) || \ - ((IDF) == DSI_PLL_IN_DIV6) || \ - ((IDF) == DSI_PLL_IN_DIV7)) -#define IS_DSI_PLL_ODF(ODF) (((ODF) == DSI_PLL_OUT_DIV1) || \ - ((ODF) == DSI_PLL_OUT_DIV2) || \ - ((ODF) == DSI_PLL_OUT_DIV4) || \ - ((ODF) == DSI_PLL_OUT_DIV8)) -#define IS_DSI_AUTO_CLKLANE_CONTROL(AutoClkLane) (((AutoClkLane) == DSI_AUTO_CLK_LANE_CTRL_DISABLE)\ - || ((AutoClkLane) == DSI_AUTO_CLK_LANE_CTRL_ENABLE)) -#define IS_DSI_NUMBER_OF_LANES(NumberOfLanes) (((NumberOfLanes) == DSI_ONE_DATA_LANE)\ - || ((NumberOfLanes) == DSI_TWO_DATA_LANES)) -#define IS_DSI_FLOW_CONTROL(FlowControl) (((FlowControl) | DSI_FLOW_CONTROL_ALL) == DSI_FLOW_CONTROL_ALL) -#define IS_DSI_COLOR_CODING(ColorCoding) ((ColorCoding) <= 5U) -#define IS_DSI_LOOSELY_PACKED(LooselyPacked) (((LooselyPacked) == DSI_LOOSELY_PACKED_ENABLE)\ - || ((LooselyPacked) == DSI_LOOSELY_PACKED_DISABLE)) -#define IS_DSI_DE_POLARITY(DataEnable) (((DataEnable) == DSI_DATA_ENABLE_ACTIVE_HIGH)\ - || ((DataEnable) == DSI_DATA_ENABLE_ACTIVE_LOW)) -#define IS_DSI_VSYNC_POLARITY(VSYNC) (((VSYNC) == DSI_VSYNC_ACTIVE_HIGH)\ - || ((VSYNC) == DSI_VSYNC_ACTIVE_LOW)) -#define IS_DSI_HSYNC_POLARITY(HSYNC) (((HSYNC) == DSI_HSYNC_ACTIVE_HIGH)\ - || ((HSYNC) == DSI_HSYNC_ACTIVE_LOW)) -#define IS_DSI_VIDEO_MODE_TYPE(VideoModeType) (((VideoModeType) == DSI_VID_MODE_NB_PULSES) || \ - ((VideoModeType) == DSI_VID_MODE_NB_EVENTS) || \ - ((VideoModeType) == DSI_VID_MODE_BURST)) -#define IS_DSI_COLOR_MODE(ColorMode) (((ColorMode) == DSI_COLOR_MODE_FULL)\ - || ((ColorMode) == DSI_COLOR_MODE_EIGHT)) -#define IS_DSI_SHUT_DOWN(ShutDown) (((ShutDown) == DSI_DISPLAY_ON) || ((ShutDown) == DSI_DISPLAY_OFF)) -#define IS_DSI_LP_COMMAND(LPCommand) (((LPCommand) == DSI_LP_COMMAND_DISABLE)\ - || ((LPCommand) == DSI_LP_COMMAND_ENABLE)) -#define IS_DSI_LP_HFP(LPHFP) (((LPHFP) == DSI_LP_HFP_DISABLE) || ((LPHFP) == DSI_LP_HFP_ENABLE)) -#define IS_DSI_LP_HBP(LPHBP) (((LPHBP) == DSI_LP_HBP_DISABLE) || ((LPHBP) == DSI_LP_HBP_ENABLE)) -#define IS_DSI_LP_VACTIVE(LPVActive) (((LPVActive) == DSI_LP_VACT_DISABLE)\ - || ((LPVActive) == DSI_LP_VACT_ENABLE)) -#define IS_DSI_LP_VFP(LPVFP) (((LPVFP) == DSI_LP_VFP_DISABLE) || ((LPVFP) == DSI_LP_VFP_ENABLE)) -#define IS_DSI_LP_VBP(LPVBP) (((LPVBP) == DSI_LP_VBP_DISABLE) || ((LPVBP) == DSI_LP_VBP_ENABLE)) -#define IS_DSI_LP_VSYNC(LPVSYNC) (((LPVSYNC) == DSI_LP_VSYNC_DISABLE)\ - || ((LPVSYNC) == DSI_LP_VSYNC_ENABLE)) -#define IS_DSI_FBTAA(FrameBTAAcknowledge) (((FrameBTAAcknowledge) == DSI_FBTAA_DISABLE)\ - || ((FrameBTAAcknowledge) == DSI_FBTAA_ENABLE)) -#define IS_DSI_TE_SOURCE(TESource) (((TESource) == DSI_TE_DSILINK) || ((TESource) == DSI_TE_EXTERNAL)) -#define IS_DSI_TE_POLARITY(TEPolarity) (((TEPolarity) == DSI_TE_RISING_EDGE)\ - || ((TEPolarity) == DSI_TE_FALLING_EDGE)) -#define IS_DSI_AUTOMATIC_REFRESH(AutomaticRefresh) (((AutomaticRefresh) == DSI_AR_DISABLE)\ - || ((AutomaticRefresh) == DSI_AR_ENABLE)) -#define IS_DSI_VS_POLARITY(VSPolarity) (((VSPolarity) == DSI_VSYNC_FALLING)\ - || ((VSPolarity) == DSI_VSYNC_RISING)) -#define IS_DSI_TE_ACK_REQUEST(TEAcknowledgeRequest) (((TEAcknowledgeRequest) == DSI_TE_ACKNOWLEDGE_DISABLE)\ - || ((TEAcknowledgeRequest) == DSI_TE_ACKNOWLEDGE_ENABLE)) -#define IS_DSI_ACK_REQUEST(AcknowledgeRequest) (((AcknowledgeRequest) == DSI_ACKNOWLEDGE_DISABLE)\ - || ((AcknowledgeRequest) == DSI_ACKNOWLEDGE_ENABLE)) -#define IS_DSI_LP_GSW0P(LP_GSW0P) (((LP_GSW0P) == DSI_LP_GSW0P_DISABLE)\ - || ((LP_GSW0P) == DSI_LP_GSW0P_ENABLE)) -#define IS_DSI_LP_GSW1P(LP_GSW1P) (((LP_GSW1P) == DSI_LP_GSW1P_DISABLE)\ - || ((LP_GSW1P) == DSI_LP_GSW1P_ENABLE)) -#define IS_DSI_LP_GSW2P(LP_GSW2P) (((LP_GSW2P) == DSI_LP_GSW2P_DISABLE)\ - || ((LP_GSW2P) == DSI_LP_GSW2P_ENABLE)) -#define IS_DSI_LP_GSR0P(LP_GSR0P) (((LP_GSR0P) == DSI_LP_GSR0P_DISABLE)\ - || ((LP_GSR0P) == DSI_LP_GSR0P_ENABLE)) -#define IS_DSI_LP_GSR1P(LP_GSR1P) (((LP_GSR1P) == DSI_LP_GSR1P_DISABLE)\ - || ((LP_GSR1P) == DSI_LP_GSR1P_ENABLE)) -#define IS_DSI_LP_GSR2P(LP_GSR2P) (((LP_GSR2P) == DSI_LP_GSR2P_DISABLE)\ - || ((LP_GSR2P) == DSI_LP_GSR2P_ENABLE)) -#define IS_DSI_LP_GLW(LP_GLW) (((LP_GLW) == DSI_LP_GLW_DISABLE)\ - || ((LP_GLW) == DSI_LP_GLW_ENABLE)) -#define IS_DSI_LP_DSW0P(LP_DSW0P) (((LP_DSW0P) == DSI_LP_DSW0P_DISABLE)\ - || ((LP_DSW0P) == DSI_LP_DSW0P_ENABLE)) -#define IS_DSI_LP_DSW1P(LP_DSW1P) (((LP_DSW1P) == DSI_LP_DSW1P_DISABLE)\ - || ((LP_DSW1P) == DSI_LP_DSW1P_ENABLE)) -#define IS_DSI_LP_DSR0P(LP_DSR0P) (((LP_DSR0P) == DSI_LP_DSR0P_DISABLE)\ - || ((LP_DSR0P) == DSI_LP_DSR0P_ENABLE)) -#define IS_DSI_LP_DLW(LP_DLW) (((LP_DLW) == DSI_LP_DLW_DISABLE)\ - || ((LP_DLW) == DSI_LP_DLW_ENABLE)) -#define IS_DSI_LP_MRDP(LP_MRDP) (((LP_MRDP) == DSI_LP_MRDP_DISABLE)\ - || ((LP_MRDP) == DSI_LP_MRDP_ENABLE)) -#define IS_DSI_SHORT_WRITE_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_SHORT_PKT_WRITE_P0) || \ - ((MODE) == DSI_DCS_SHORT_PKT_WRITE_P1) || \ - ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P0) || \ - ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P1) || \ - ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P2)) -#define IS_DSI_LONG_WRITE_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_LONG_PKT_WRITE) || \ - ((MODE) == DSI_GEN_LONG_PKT_WRITE)) -#define IS_DSI_READ_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_SHORT_PKT_READ) || \ - ((MODE) == DSI_GEN_SHORT_PKT_READ_P0) || \ - ((MODE) == DSI_GEN_SHORT_PKT_READ_P1) || \ - ((MODE) == DSI_GEN_SHORT_PKT_READ_P2)) -#define IS_DSI_COMMUNICATION_DELAY(CommDelay) (((CommDelay) == DSI_SLEW_RATE_HSTX) || \ - ((CommDelay) == DSI_SLEW_RATE_LPTX) || \ - ((CommDelay) == DSI_HS_DELAY)) -#define IS_DSI_LANE_GROUP(Lane) (((Lane) == DSI_CLOCK_LANE) || ((Lane) == DSI_DATA_LANES)) -#define IS_DSI_CUSTOM_LANE(CustomLane) (((CustomLane) == DSI_SWAP_LANE_PINS)\ - || ((CustomLane) == DSI_INVERT_HS_SIGNAL)) -#define IS_DSI_LANE(Lane) (((Lane) == DSI_CLOCK_LANE) || \ - ((Lane) == DSI_DATA_LANE0) || ((Lane) == DSI_DATA_LANE1)) -#define IS_DSI_PHY_TIMING(Timing) (((Timing) == DSI_TCLK_POST ) || \ - ((Timing) == DSI_TLPX_CLK ) || \ - ((Timing) == DSI_THS_EXIT ) || \ - ((Timing) == DSI_TLPX_DATA ) || \ - ((Timing) == DSI_THS_ZERO ) || \ - ((Timing) == DSI_THS_TRAIL ) || \ - ((Timing) == DSI_THS_PREPARE ) || \ - ((Timing) == DSI_TCLK_ZERO ) || \ - ((Timing) == DSI_TCLK_PREPARE)) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* DSI */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_DSI_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h deleted file mode 100644 index ba5a09b..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h +++ /dev/null @@ -1,2144 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_eth.h - * @author MCD Application Team - * @brief Header file of ETH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_ETH_H -#define STM32F4xx_HAL_ETH_H - -#ifdef __cplusplus -extern "C" { -#endif - - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined(ETH) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup ETH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -#ifndef ETH_TX_DESC_CNT -#define ETH_TX_DESC_CNT 4U -#endif /* ETH_TX_DESC_CNT */ - -#ifndef ETH_RX_DESC_CNT -#define ETH_RX_DESC_CNT 4U -#endif /* ETH_RX_DESC_CNT */ - - -/*********************** Descriptors struct def section ************************/ -/** @defgroup ETH_Exported_Types ETH Exported Types - * @{ - */ - -/** - * @brief ETH DMA Descriptor structure definition - */ -typedef struct -{ - __IO uint32_t DESC0; - __IO uint32_t DESC1; - __IO uint32_t DESC2; - __IO uint32_t DESC3; - __IO uint32_t DESC4; - __IO uint32_t DESC5; - __IO uint32_t DESC6; - __IO uint32_t DESC7; - uint32_t BackupAddr0; /* used to store rx buffer 1 address */ - uint32_t BackupAddr1; /* used to store rx buffer 2 address */ -} ETH_DMADescTypeDef; -/** - * - */ - -/** - * @brief ETH Buffers List structure definition - */ -typedef struct __ETH_BufferTypeDef -{ - uint8_t *buffer; /*gState = HAL_ETH_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_ETH_STATE_RESET; \ - } while(0) -#endif /*USE_HAL_ETH_REGISTER_CALLBACKS */ - -/** - * @brief Enables the specified ETHERNET DMA interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be - * enabled @ref ETH_DMA_Interrupts - * @retval None - */ -#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER \ - |= (__INTERRUPT__)) - -/** - * @brief Disables the specified ETHERNET DMA interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be - * disabled. @ref ETH_DMA_Interrupts - * @retval None - */ -#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER \ - &= ~(__INTERRUPT__)) - -/** - * @brief Gets the ETHERNET DMA IT source enabled or disabled. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the interrupt source to get . @ref ETH_DMA_Interrupts - * @retval The ETH DMA IT Source enabled or disabled - */ -#define __HAL_ETH_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->DMAIER &\ - (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Gets the ETHERNET DMA IT pending bit. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the interrupt source to get . @ref ETH_DMA_Interrupts - * @retval The state of ETH DMA IT (SET or RESET) - */ -#define __HAL_ETH_DMA_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->DMASR &\ - (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clears the ETHERNET DMA IT pending bit. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts - * @retval None - */ -#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR = (__INTERRUPT__)) - -/** - * @brief Checks whether the specified ETHERNET DMA flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Status_Flags - * @retval The state of ETH DMA FLAG (SET or RESET). - */ -#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMACSR &\ - ( __FLAG__)) == ( __FLAG__)) - -/** - * @brief Clears the specified ETHERNET DMA flag. - * @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Status_Flags - * @retval The state of ETH DMA FLAG (SET or RESET). - */ -#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMACSR = ( __FLAG__)) - -/** - * @brief Enables the specified ETHERNET MAC interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be - * enabled @ref ETH_MAC_Interrupts - * @retval None - */ -#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIER \ - |= (__INTERRUPT__)) - -/** - * @brief Disables the specified ETHERNET MAC interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be - * enabled @ref ETH_MAC_Interrupts - * @retval None - */ -#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIER \ - &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified ETHERNET MAC flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __INTERRUPT__: specifies the flag to check. @ref ETH_MAC_Interrupts - * @retval The state of ETH MAC IT (SET or RESET). - */ -#define __HAL_ETH_MAC_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MACSR &\ - ( __INTERRUPT__)) == ( __INTERRUPT__)) - -/*!< External interrupt line 19 Connected to the ETH wakeup EXTI Line */ -#define ETH_WAKEUP_EXTI_LINE 0x00080000U - -/** - * @brief Enable the ETH WAKEUP Exti Line. - * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be enabled. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval None. - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT(__EXTI_LINE__) (EXTI->IMR |= (__EXTI_LINE__)) - -/** - * @brief checks whether the specified ETH WAKEUP Exti interrupt flag is set or not. - * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval EXTI ETH WAKEUP Line Status. - */ -#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clear the ETH WAKEUP Exti flag. - * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval None. - */ -#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - - -/** - * @brief enable rising edge interrupt on selected EXTI line. - * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE(__EXTI_LINE__) (EXTI->FTSR &= ~(__EXTI_LINE__)); \ - (EXTI->RTSR |= (__EXTI_LINE__)) - -/** - * @brief enable falling edge interrupt on selected EXTI line. - * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR &= ~(__EXTI_LINE__));\ - (EXTI->FTSR |= (__EXTI_LINE__)) - -/** - * @brief enable falling edge interrupt on selected EXTI line. - * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR |= (__EXTI_LINE__));\ - (EXTI->FTSR |= (__EXTI_LINE__)) - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. - * @arg ETH_WAKEUP_EXTI_LINE - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) - -#define __HAL_ETH_GET_PTP_CONTROL(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->PTPTSCR) & \ - (__FLAG__)) == (__FLAG__)) ? SET : RESET) - -#define __HAL_ETH_SET_PTP_CONTROL(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->PTPTSCR |= (__FLAG__)) -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup ETH_Exported_Functions - * @{ - */ - -/** @addtogroup ETH_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de initialization functions **********************************/ -HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth); -void HAL_ETH_MspInit(ETH_HandleTypeDef *heth); -void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, - pETH_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup ETH_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth); - -HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff); -HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, - pETH_rxAllocateCallbackTypeDef rxAllocateCallback); -HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback); -HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(ETH_HandleTypeDef *heth, uint32_t *pErrorCode); -HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback); -HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth); - -#ifdef HAL_ETH_USE_PTP -HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig); -HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig); -HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time); -HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time); -HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, - ETH_TimeTypeDef *timeoffset); -HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp); -HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp); -HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback); -HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth); -#endif /* HAL_ETH_USE_PTP */ - -HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t Timeout); -HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig); - -HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, - uint32_t RegValue); -HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, - uint32_t *pRegValue); - -void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth); -void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_RxAllocateCallback(uint8_t **buff); -void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length); -void HAL_ETH_TxFreeCallback(uint32_t *buff); -void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp); -/** - * @} - */ - -/** @addtogroup ETH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions **********************************************/ -/* MAC & DMA Configuration APIs **********************************************/ -HAL_StatusTypeDef HAL_ETH_GetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); -HAL_StatusTypeDef HAL_ETH_GetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); -HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); -HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); -void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth); - -/* MAC VLAN Processing APIs ************************************************/ -void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, - uint32_t VLANIdentifier); - -/* MAC L2 Packet Filtering APIs **********************************************/ -HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig); -HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig); -HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable); -HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(ETH_HandleTypeDef *heth, uint32_t AddrNbr, uint8_t *pMACAddr); - -/* MAC Power Down APIs *****************************************************/ -void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, ETH_PowerDownConfigTypeDef *pPowerDownConfig); -void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count); - -/** - * @} - */ - -/** @addtogroup ETH_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth); -uint32_t HAL_ETH_GetError(ETH_HandleTypeDef *heth); -uint32_t HAL_ETH_GetDMAError(ETH_HandleTypeDef *heth); -uint32_t HAL_ETH_GetMACError(ETH_HandleTypeDef *heth); -uint32_t HAL_ETH_GetMACWakeUpSource(ETH_HandleTypeDef *heth); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* ETH */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_ETH_H */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h deleted file mode 100644 index 26d789e..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h +++ /dev/null @@ -1,425 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.h - * @author MCD Application Team - * @brief Header file of FLASH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_H -#define __STM32F4xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0U, - FLASH_PROC_SECTERASE, - FLASH_PROC_MASSERASE, - FLASH_PROC_PROGRAM -} FLASH_ProcedureTypeDef; - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ - - __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ - - __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ - - __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ - - __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ - - __IO uint32_t Address; /*Internal variable to save address selected for program*/ - - HAL_LockTypeDef Lock; /* FLASH locking object */ - - __IO uint32_t ErrorCode; /* FLASH error code */ - -}FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ -/** @defgroup FLASH_Error_Code FLASH Error Code - * @brief FLASH Error Code - * @{ - */ -#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */ -#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */ -#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */ -#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */ -#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */ -#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */ -/** - * @} - */ - -/** @defgroup FLASH_Type_Program FLASH Type Program - * @{ - */ -#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */ -/** - * @} - */ - -/** @defgroup FLASH_Flag_definition FLASH Flag definition - * @brief Flag definition - * @{ - */ -#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ -#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ -#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ -#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ -#if defined(FLASH_SR_RDERR) -#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */ -#endif /* FLASH_SR_RDERR */ -#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ -/** - * @} - */ - -/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition - * @brief FLASH Interrupt definition - * @{ - */ -#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ -#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */ -/** - * @} - */ - -/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism - * @{ - */ -#define FLASH_PSIZE_BYTE 0x00000000U -#define FLASH_PSIZE_HALF_WORD 0x00000100U -#define FLASH_PSIZE_WORD 0x00000200U -#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U -#define CR_PSIZE_MASK 0xFFFFFCFFU -/** - * @} - */ - -/** @defgroup FLASH_Keys FLASH Keys - * @{ - */ -#define RDP_KEY ((uint16_t)0x00A5) -#define FLASH_KEY1 0x45670123U -#define FLASH_KEY2 0xCDEF89ABU -#define FLASH_OPT_KEY1 0x08192A3BU -#define FLASH_OPT_KEY2 0x4C5D6E7FU -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @{ - */ -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__ FLASH Latency - * The value of this parameter depend on device used within the same series - * @retval none - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * The value of this parameter depend on device used within the same series - */ -#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) - -/** - * @brief Enable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) - -/** - * @brief Enable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) - -/** - * @brief Disable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) - -/** - * @brief Enable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) - -/** - * @brief Disable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) - -/** - * @brief Resets the FLASH instruction Cache. - * @note This function must be used only when the Instruction Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ - FLASH->ACR &= ~FLASH_ACR_ICRST; \ - }while(0U) - -/** - * @brief Resets the FLASH data Cache. - * @note This function must be used only when the data Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ - FLASH->ACR &= ~FLASH_ACR_DCRST; \ - }while(0U) -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__ specifies the FLASH flags to check. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) - * @arg FLASH_FLAG_BSY : FLASH Busy flag - * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) - -/** - * @brief Clear the specified FLASH flags. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) - * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) -/** - * @} - */ - -/* Include FLASH HAL Extension module */ -#include "stm32f4xx_hal_flash_ex.h" -#include "stm32f4xx_hal_flash_ramfunc.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -/* Program operation functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -/* FLASH IRQ handler method */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -/* Option bytes control */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -uint32_t HAL_FLASH_GetError(void); -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ - -/** - * @brief ACR register byte 0 (Bits[7:0]) base address - */ -#define ACR_BYTE0_ADDRESS 0x40023C00U -/** - * @brief OPTCR register byte 0 (Bits[7:0]) base address - */ -#define OPTCR_BYTE0_ADDRESS 0x40023C14U -/** - * @brief OPTCR register byte 1 (Bits[15:8]) base address - */ -#define OPTCR_BYTE1_ADDRESS 0x40023C15U -/** - * @brief OPTCR register byte 2 (Bits[23:16]) base address - */ -#define OPTCR_BYTE2_ADDRESS 0x40023C16U -/** - * @brief OPTCR register byte 3 (Bits[31:24]) base address - */ -#define OPTCR_BYTE3_ADDRESS 0x40023C17U - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ -#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ - ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h deleted file mode 100644 index 1cf8c45..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h +++ /dev/null @@ -1,1063 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.h - * @author MCD Application Team - * @brief Header file of FLASH HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_EX_H -#define __STM32F4xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< Mass erase or sector Erase. - This parameter can be a value of @ref FLASHEx_Type_Erase */ - - uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled - This parameter must be a value of @ref FLASHEx_Sectors */ - - uint32_t NbSectors; /*!< Number of sectors to be erased. - This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ - - uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism - This parameter must be a value of @ref FLASHEx_Voltage_Range */ - -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Option Bytes Program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured. - This parameter can be a value of @ref FLASHEx_Option_Type */ - - uint32_t WRPState; /*!< Write protection activation or deactivation. - This parameter can be a value of @ref FLASHEx_WRP_State */ - - uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. - The value of this parameter depend on device used within the same series */ - - uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t RDPLevel; /*!< Set the read protection level. - This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ - - uint32_t BORLevel; /*!< Set the BOR Level. - This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ - - uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */ - -} FLASH_OBProgramInitTypeDef; - -/** - * @brief FLASH Advanced Option Bytes Program structure definition - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured for extension. - This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */ - - uint32_t PCROPState; /*!< PCROP activation or deactivation. - This parameter can be a value of @ref FLASHEx_PCROP_State */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - uint16_t Sectors; /*!< specifies the sector(s) set for PCROP. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\ - STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint8_t BootConfig; /*!< Specifies Option bytes for boot config. - This parameter can be a value of @ref FLASHEx_Dual_Boot */ - -#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -}FLASH_AdvOBProgramInitTypeDef; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || - STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASHEx_Type_Erase FLASH Type Erase - * @{ - */ -#define FLASH_TYPEERASE_SECTORS 0x00000000U /*!< Sectors erase only */ -#define FLASH_TYPEERASE_MASSERASE 0x00000001U /*!< Flash Mass erase activation */ -/** - * @} - */ - -/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range - * @{ - */ -#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Device operating range: 1.8V to 2.1V */ -#define FLASH_VOLTAGE_RANGE_2 0x00000001U /*!< Device operating range: 2.1V to 2.7V */ -#define FLASH_VOLTAGE_RANGE_3 0x00000002U /*!< Device operating range: 2.7V to 3.6V */ -#define FLASH_VOLTAGE_RANGE_4 0x00000003U /*!< Device operating range: 2.7V to 3.6V + External Vpp */ -/** - * @} - */ - -/** @defgroup FLASHEx_WRP_State FLASH WRP State - * @{ - */ -#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */ -#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Type FLASH Option Type - * @{ - */ -#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ -#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ -#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ -#define OPTIONBYTE_BOR 0x00000008U /*!< BOR option byte configuration */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection - * @{ - */ -#define OB_RDP_LEVEL_0 ((uint8_t)0xAA) -#define OB_RDP_LEVEL_1 ((uint8_t)0x55) -#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 - it s no more possible to go back to level 1 or 0 */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP - * @{ - */ -#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ -/** - * @} - */ - - -/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY - * @{ - */ -#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ -/** - * @} - */ - -/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level - * @{ - */ -#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ -#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ -#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ -#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup FLASHEx_PCROP_State FLASH PCROP State - * @{ - */ -#define OB_PCROP_STATE_DISABLE 0x00000000U /*!< Disable PCROP */ -#define OB_PCROP_STATE_ENABLE 0x00000001U /*!< Enable PCROP */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define OPTIONBYTE_PCROP 0x00000001U /*!< PCROP option byte configuration */ -#define OPTIONBYTE_BOOTCONFIG 0x00000002U /*!< BOOTConfig option byte configuration */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -#define OPTIONBYTE_PCROP 0x00000001U /*!= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \ - (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END))) - -#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xC */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F401xC) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xC */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASH Private Functions - * @{ - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange); -void FLASH_FlushCaches(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h deleted file mode 100644 index 05917ec..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.h - * @author MCD Application Team - * @brief Header file of FLASH RAMFUNC driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_FLASH_RAMFUNC_H -#define __STM32F4xx_FLASH_RAMFUNC_H - -#ifdef __cplusplus - extern "C" { -#endif -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_RAMFUNC_Exported_Functions - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 - * @{ - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_FLASH_RAMFUNC_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h deleted file mode 100644 index 400b923..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h +++ /dev/null @@ -1,837 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpi2c.h - * @author MCD Application Team - * @brief Header file of FMPI2C HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_FMPI2C_H -#define STM32F4xx_HAL_FMPI2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(FMPI2C_CR1_PE) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMPI2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types - * @{ - */ - -/** @defgroup FMPI2C_Configuration_Structure_definition FMPI2C Configuration Structure definition - * @brief FMPI2C Configuration Structure definition - * @{ - */ -typedef struct -{ - uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value. - This parameter calculated by referring to FMPI2C initialization section - in Reference manual */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref FMPI2C_ADDRESSING_MODE */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref FMPI2C_DUAL_ADDRESSING_MODE */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing - mode is selected. - This parameter can be a value of @ref FMPI2C_OWN_ADDRESS2_MASKS */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref FMPI2C_GENERAL_CALL_ADDRESSING_MODE */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref FMPI2C_NOSTRETCH_MODE */ - -} FMPI2C_InitTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_state_structure_definition HAL state structure definition - * @brief HAL State structure definition - * @note HAL FMPI2C State value coding follow below described bitmap :\n - * b7-b6 Error information\n - * 00 : No Error\n - * 01 : Abort (Abort user request on going)\n - * 10 : Timeout\n - * 11 : Error\n - * b5 Peripheral initialization status\n - * 0 : Reset (peripheral not initialized)\n - * 1 : Init done (peripheral initialized and ready to use. HAL FMPI2C Init function called)\n - * b4 (not used)\n - * x : Should be set to 0\n - * b3\n - * 0 : Ready or Busy (No Listen mode ongoing)\n - * 1 : Listen (peripheral in Address Listen Mode)\n - * b2 Intrinsic process state\n - * 0 : Ready\n - * 1 : Busy (peripheral busy with some configuration or internal operations)\n - * b1 Rx state\n - * 0 : Ready (no Rx operation ongoing)\n - * 1 : Busy (Rx operation ongoing)\n - * b0 Tx state\n - * 0 : Ready (no Tx operation ongoing)\n - * 1 : Busy (Tx operation ongoing) - * @{ - */ -typedef enum -{ - HAL_FMPI2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ - HAL_FMPI2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ - HAL_FMPI2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ - HAL_FMPI2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ - HAL_FMPI2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ - HAL_FMPI2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ - HAL_FMPI2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission - process is ongoing */ - HAL_FMPI2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception - process is ongoing */ - HAL_FMPI2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_FMPI2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_FMPI2C_STATE_ERROR = 0xE0U /*!< Error */ - -} HAL_FMPI2C_StateTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_mode_structure_definition HAL mode structure definition - * @brief HAL Mode structure definition - * @note HAL FMPI2C Mode value coding follow below described bitmap :\n - * b7 (not used)\n - * x : Should be set to 0\n - * b6\n - * 0 : None\n - * 1 : Memory (HAL FMPI2C communication is in Memory Mode)\n - * b5\n - * 0 : None\n - * 1 : Slave (HAL FMPI2C communication is in Slave Mode)\n - * b4\n - * 0 : None\n - * 1 : Master (HAL FMPI2C communication is in Master Mode)\n - * b3-b2-b1-b0 (not used)\n - * xxxx : Should be set to 0000 - * @{ - */ -typedef enum -{ - HAL_FMPI2C_MODE_NONE = 0x00U, /*!< No FMPI2C communication on going */ - HAL_FMPI2C_MODE_MASTER = 0x10U, /*!< FMPI2C communication is in Master Mode */ - HAL_FMPI2C_MODE_SLAVE = 0x20U, /*!< FMPI2C communication is in Slave Mode */ - HAL_FMPI2C_MODE_MEM = 0x40U /*!< FMPI2C communication is in Memory Mode */ - -} HAL_FMPI2C_ModeTypeDef; - -/** - * @} - */ - -/** @defgroup FMPI2C_Error_Code_definition FMPI2C Error Code definition - * @brief FMPI2C Error Code definition - * @{ - */ -#define HAL_FMPI2C_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_FMPI2C_ERROR_BERR (0x00000001U) /*!< BERR error */ -#define HAL_FMPI2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ -#define HAL_FMPI2C_ERROR_AF (0x00000004U) /*!< ACKF error */ -#define HAL_FMPI2C_ERROR_OVR (0x00000008U) /*!< OVR error */ -#define HAL_FMPI2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_FMPI2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ -#define HAL_FMPI2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ -#define HAL_FMPI2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) -#define HAL_FMPI2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ -#define HAL_FMPI2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ -/** - * @} - */ - -/** @defgroup FMPI2C_handle_Structure_definition FMPI2C handle Structure definition - * @brief FMPI2C handle Structure definition - * @{ - */ -typedef struct __FMPI2C_HandleTypeDef -{ - FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */ - - FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */ - - uint16_t XferSize; /*!< FMPI2C transfer size */ - - __IO uint16_t XferCount; /*!< FMPI2C transfer counter */ - - __IO uint32_t XferOptions; /*!< FMPI2C sequantial transfer options, this parameter can - be a value of @ref FMPI2C_XFEROPTIONS */ - - __IO uint32_t PreviousState; /*!< FMPI2C communication Previous state */ - - HAL_StatusTypeDef(*XferISR)(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources); - /*!< FMPI2C transfer IRQ handler function pointer */ - - DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< FMPI2C locking object */ - - __IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */ - - __IO HAL_FMPI2C_ModeTypeDef Mode; /*!< FMPI2C communication mode */ - - __IO uint32_t ErrorCode; /*!< FMPI2C Error code */ - - __IO uint32_t AddrEventCount; /*!< FMPI2C Address Event counter */ - -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Listen Complete callback */ - void (* MemTxCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Memory Tx Transfer completed callback */ - void (* MemRxCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Memory Rx Transfer completed callback */ - void (* ErrorCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Error callback */ - void (* AbortCpltCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Abort callback */ - - void (* AddrCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); - /*!< FMPI2C Slave Address Match callback */ - - void (* MspInitCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Msp Init callback */ - void (* MspDeInitCallback)(struct __FMPI2C_HandleTypeDef *hfmpi2c); - /*!< FMPI2C Msp DeInit callback */ - -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ -} FMPI2C_HandleTypeDef; - -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) -/** - * @brief HAL FMPI2C Callback ID enumeration definition - */ -typedef enum -{ - HAL_FMPI2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< FMPI2C Master Tx Transfer completed callback ID */ - HAL_FMPI2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< FMPI2C Master Rx Transfer completed callback ID */ - HAL_FMPI2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< FMPI2C Slave Tx Transfer completed callback ID */ - HAL_FMPI2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< FMPI2C Slave Rx Transfer completed callback ID */ - HAL_FMPI2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< FMPI2C Listen Complete callback ID */ - HAL_FMPI2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< FMPI2C Memory Tx Transfer callback ID */ - HAL_FMPI2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< FMPI2C Memory Rx Transfer completed callback ID */ - HAL_FMPI2C_ERROR_CB_ID = 0x07U, /*!< FMPI2C Error callback ID */ - HAL_FMPI2C_ABORT_CB_ID = 0x08U, /*!< FMPI2C Abort callback ID */ - - HAL_FMPI2C_MSPINIT_CB_ID = 0x09U, /*!< FMPI2C Msp Init callback ID */ - HAL_FMPI2C_MSPDEINIT_CB_ID = 0x0AU /*!< FMPI2C Msp DeInit callback ID */ - -} HAL_FMPI2C_CallbackIDTypeDef; - -/** - * @brief HAL FMPI2C Callback pointer definition - */ -typedef void (*pFMPI2C_CallbackTypeDef)(FMPI2C_HandleTypeDef *hfmpi2c); -/*!< pointer to an FMPI2C callback function */ -typedef void (*pFMPI2C_AddrCallbackTypeDef)(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, - uint16_t AddrMatchCode); -/*!< pointer to an FMPI2C Address Match callback function */ - -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants - * @{ - */ - -/** @defgroup FMPI2C_XFEROPTIONS FMPI2C Sequential Transfer Options - * @{ - */ -#define FMPI2C_FIRST_FRAME ((uint32_t)FMPI2C_SOFTEND_MODE) -#define FMPI2C_FIRST_AND_NEXT_FRAME ((uint32_t)(FMPI2C_RELOAD_MODE | FMPI2C_SOFTEND_MODE)) -#define FMPI2C_NEXT_FRAME ((uint32_t)(FMPI2C_RELOAD_MODE | FMPI2C_SOFTEND_MODE)) -#define FMPI2C_FIRST_AND_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE) -#define FMPI2C_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE) -#define FMPI2C_LAST_FRAME_NO_STOP ((uint32_t)FMPI2C_SOFTEND_MODE) - -/* List of XferOptions in usage of : - * 1- Restart condition in all use cases (direction change or not) - */ -#define FMPI2C_OTHER_FRAME (0x000000AAU) -#define FMPI2C_OTHER_AND_LAST_FRAME (0x0000AA00U) -/** - * @} - */ - -/** @defgroup FMPI2C_ADDRESSING_MODE FMPI2C Addressing Mode - * @{ - */ -#define FMPI2C_ADDRESSINGMODE_7BIT (0x00000001U) -#define FMPI2C_ADDRESSINGMODE_10BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup FMPI2C_DUAL_ADDRESSING_MODE FMPI2C Dual Addressing Mode - * @{ - */ -#define FMPI2C_DUALADDRESS_DISABLE (0x00000000U) -#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN -/** - * @} - */ - -/** @defgroup FMPI2C_OWN_ADDRESS2_MASKS FMPI2C Own Address2 Masks - * @{ - */ -#define FMPI2C_OA2_NOMASK ((uint8_t)0x00U) -#define FMPI2C_OA2_MASK01 ((uint8_t)0x01U) -#define FMPI2C_OA2_MASK02 ((uint8_t)0x02U) -#define FMPI2C_OA2_MASK03 ((uint8_t)0x03U) -#define FMPI2C_OA2_MASK04 ((uint8_t)0x04U) -#define FMPI2C_OA2_MASK05 ((uint8_t)0x05U) -#define FMPI2C_OA2_MASK06 ((uint8_t)0x06U) -#define FMPI2C_OA2_MASK07 ((uint8_t)0x07U) -/** - * @} - */ - -/** @defgroup FMPI2C_GENERAL_CALL_ADDRESSING_MODE FMPI2C General Call Addressing Mode - * @{ - */ -#define FMPI2C_GENERALCALL_DISABLE (0x00000000U) -#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN -/** - * @} - */ - -/** @defgroup FMPI2C_NOSTRETCH_MODE FMPI2C No-Stretch Mode - * @{ - */ -#define FMPI2C_NOSTRETCH_DISABLE (0x00000000U) -#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup FMPI2C_MEMORY_ADDRESS_SIZE FMPI2C Memory Address Size - * @{ - */ -#define FMPI2C_MEMADD_SIZE_8BIT (0x00000001U) -#define FMPI2C_MEMADD_SIZE_16BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup FMPI2C_XFERDIRECTION FMPI2C Transfer Direction Master Point of View - * @{ - */ -#define FMPI2C_DIRECTION_TRANSMIT (0x00000000U) -#define FMPI2C_DIRECTION_RECEIVE (0x00000001U) -/** - * @} - */ - -/** @defgroup FMPI2C_RELOAD_END_MODE FMPI2C Reload End Mode - * @{ - */ -#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD -#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND -#define FMPI2C_SOFTEND_MODE (0x00000000U) -/** - * @} - */ - -/** @defgroup FMPI2C_START_STOP_MODE FMPI2C Start or Stop Mode - * @{ - */ -#define FMPI2C_NO_STARTSTOP (0x00000000U) -#define FMPI2C_GENERATE_STOP (uint32_t)(0x80000000U | FMPI2C_CR2_STOP) -#define FMPI2C_GENERATE_START_READ (uint32_t)(0x80000000U | FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN) -#define FMPI2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | FMPI2C_CR2_START) -/** - * @} - */ - -/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition - * @brief FMPI2C Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE -#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE -#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE -#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE -#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE -#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE -#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE -/** - * @} - */ - -/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition - * @{ - */ -#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE -#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS -#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE -#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR -#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF -#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF -#define FMPI2C_FLAG_TC FMPI2C_ISR_TC -#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR -#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR -#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO -#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR -#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR -#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT -#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT -#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY -#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros - * @{ - */ - -/** @brief Reset FMPI2C handle state. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @retval None - */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) -#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_FMPI2C_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET) -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - -/** @brief Enable the specified FMPI2C interrupt. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable - * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable - * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable - * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable - * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable - * @arg @ref FMPI2C_IT_RXI RX interrupt enable - * @arg @ref FMPI2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) - -/** @brief Disable the specified FMPI2C interrupt. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable - * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable - * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable - * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable - * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable - * @arg @ref FMPI2C_IT_RXI RX interrupt enable - * @arg @ref FMPI2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) - -/** @brief Check whether the specified FMPI2C interrupt source is enabled or not. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @param __INTERRUPT__ specifies the FMPI2C interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable - * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable - * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable - * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable - * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable - * @arg @ref FMPI2C_IT_RXI RX interrupt enable - * @arg @ref FMPI2C_IT_TXI TX interrupt enable - * - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ - (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified FMPI2C flag is set or not. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref FMPI2C_FLAG_TXE Transmit data register empty - * @arg @ref FMPI2C_FLAG_TXIS Transmit interrupt status - * @arg @ref FMPI2C_FLAG_RXNE Receive data register not empty - * @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag - * @arg @ref FMPI2C_FLAG_STOPF STOP detection flag - * @arg @ref FMPI2C_FLAG_TC Transfer complete (master mode) - * @arg @ref FMPI2C_FLAG_TCR Transfer complete reload - * @arg @ref FMPI2C_FLAG_BERR Bus error - * @arg @ref FMPI2C_FLAG_ARLO Arbitration lost - * @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun - * @arg @ref FMPI2C_FLAG_PECERR PEC error in reception - * @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref FMPI2C_FLAG_ALERT SMBus alert - * @arg @ref FMPI2C_FLAG_BUSY Bus busy - * @arg @ref FMPI2C_FLAG_DIR Transfer direction (slave mode) - * - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define FMPI2C_FLAG_MASK (0x0001FFFFU) -#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ - (__FLAG__)) == (__FLAG__)) ? SET : RESET) - -/** @brief Clear the FMPI2C pending flags which are cleared by writing 1 in a specific bit. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg @ref FMPI2C_FLAG_TXE Transmit data register empty - * @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag - * @arg @ref FMPI2C_FLAG_STOPF STOP detection flag - * @arg @ref FMPI2C_FLAG_BERR Bus error - * @arg @ref FMPI2C_FLAG_ARLO Arbitration lost - * @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun - * @arg @ref FMPI2C_FLAG_PECERR PEC error in reception - * @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref FMPI2C_FLAG_ALERT SMBus alert - * - * @retval None - */ -#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == FMPI2C_FLAG_TXE) ? \ - ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ - ((__HANDLE__)->Instance->ICR = (__FLAG__))) - -/** @brief Enable the specified FMPI2C peripheral. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @retval None - */ -#define __HAL_FMPI2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE)) - -/** @brief Disable the specified FMPI2C peripheral. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @retval None - */ -#define __HAL_FMPI2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE)) - -/** @brief Generate a Non-Acknowledge FMPI2C peripheral in Slave mode. - * @param __HANDLE__ specifies the FMPI2C Handle. - * @retval None - */ -#define __HAL_FMPI2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, FMPI2C_CR2_NACK)) -/** - * @} - */ - -/* Include FMPI2C HAL Extended module */ -#include "stm32f4xx_hal_fmpi2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPI2C_Exported_Functions - * @{ - */ - -/** @addtogroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions******************************/ -HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c); -HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_FMPI2C_RegisterCallback(FMPI2C_HandleTypeDef *hfmpi2c, HAL_FMPI2C_CallbackIDTypeDef CallbackID, - pFMPI2C_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_FMPI2C_UnRegisterCallback(FMPI2C_HandleTypeDef *hfmpi2c, HAL_FMPI2C_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_FMPI2C_RegisterAddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, pFMPI2C_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_FMPI2C_UnRegisterAddrCallback(FMPI2C_HandleTypeDef *hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* IO operation functions ****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, - uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c); -HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c); -HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -/** - * @} - */ - -/** @addtogroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c); -void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c); -/** - * @} - */ - -/** @addtogroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @{ - */ -/* Peripheral State, Mode and Error functions *********************************/ -HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c); -HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c); -uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c); - -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FMPI2C_Private_Macro FMPI2C Private Macros - * @{ - */ - -#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \ - ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT)) - -#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE)) - -#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \ - ((MASK) == FMPI2C_OA2_MASK01) || \ - ((MASK) == FMPI2C_OA2_MASK02) || \ - ((MASK) == FMPI2C_OA2_MASK03) || \ - ((MASK) == FMPI2C_OA2_MASK04) || \ - ((MASK) == FMPI2C_OA2_MASK05) || \ - ((MASK) == FMPI2C_OA2_MASK06) || \ - ((MASK) == FMPI2C_OA2_MASK07)) - -#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \ - ((CALL) == FMPI2C_GENERALCALL_ENABLE)) - -#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE)) - -#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT)) - -#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \ - ((MODE) == FMPI2C_AUTOEND_MODE) || \ - ((MODE) == FMPI2C_SOFTEND_MODE)) - -#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \ - ((REQUEST) == FMPI2C_GENERATE_START_READ) || \ - ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \ - ((REQUEST) == FMPI2C_NO_STARTSTOP)) - -#define IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == FMPI2C_FIRST_FRAME) || \ - ((REQUEST) == FMPI2C_FIRST_AND_NEXT_FRAME) || \ - ((REQUEST) == FMPI2C_NEXT_FRAME) || \ - ((REQUEST) == FMPI2C_FIRST_AND_LAST_FRAME) || \ - ((REQUEST) == FMPI2C_LAST_FRAME) || \ - ((REQUEST) == FMPI2C_LAST_FRAME_NO_STOP) || \ - IS_FMPI2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) - -#define IS_FMPI2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == FMPI2C_OTHER_FRAME) || \ - ((REQUEST) == FMPI2C_OTHER_AND_LAST_FRAME)) - -#define FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ - (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | \ - FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | \ - FMPI2C_CR2_RD_WRN))) - -#define FMPI2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & FMPI2C_ISR_ADDCODE) \ - >> 16U)) -#define FMPI2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & FMPI2C_ISR_DIR) \ - >> 16U)) -#define FMPI2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & FMPI2C_CR2_AUTOEND) -#define FMPI2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & FMPI2C_OAR1_OA1)) -#define FMPI2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & FMPI2C_OAR2_OA2)) - -#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) -#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) - -#define FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ - (uint16_t)(0xFF00U))) >> 8U))) -#define FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) - -#define FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | \ - (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & \ - (~FMPI2C_CR2_RD_WRN)) : \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | \ - (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & \ - (~FMPI2C_CR2_RD_WRN))) - -#define FMPI2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & FMPI2C_FLAG_MASK)) == \ - ((__FLAG__) & FMPI2C_FLAG_MASK)) ? SET : RESET) -#define FMPI2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions - * @{ - */ -/* Private functions are defined in stm32f4xx_hal_fmpi2c.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_FMPI2C_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h deleted file mode 100644 index 8b90f40..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h +++ /dev/null @@ -1,150 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpi2c_ex.h - * @author MCD Application Team - * @brief Header file of FMPI2C HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_FMPI2C_EX_H -#define STM32F4xx_HAL_FMPI2C_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(FMPI2C_CR1_PE) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMPI2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FMPI2CEx_Exported_Constants FMPI2C Extended Exported Constants - * @{ - */ - -/** @defgroup FMPI2CEx_Analog_Filter FMPI2C Extended Analog Filter - * @{ - */ -#define FMPI2C_ANALOGFILTER_ENABLE 0x00000000U -#define FMPI2C_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF -/** - * @} - */ - -/** @defgroup FMPI2CEx_FastModePlus FMPI2C Extended Fast Mode Plus - * @{ - */ -#define FMPI2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins */ -#define FMPI2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FMPI2CEx_Exported_Macros FMPI2C Extended Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions - * @{ - */ - -/** @addtogroup FMPI2CEx_Exported_Functions_Group1 Filter Mode Functions - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_FMPI2CEx_ConfigAnalogFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_FMPI2CEx_ConfigDigitalFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter); -/** - * @} - */ - -/** @addtogroup FMPI2CEx_Exported_Functions_Group3 Fast Mode Plus Functions - * @{ - */ -void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); -void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMPI2CEx_Private_Constants FMPI2C Extended Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FMPI2CEx_Private_Macro FMPI2C Extended Private Macros - * @{ - */ -#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == FMPI2C_ANALOGFILTER_DISABLE)) - -#define IS_FMPI2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) - -#define IS_FMPI2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SCL)) == FMPI2C_FASTMODEPLUS_SCL) || \ - (((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SDA)) == FMPI2C_FASTMODEPLUS_SDA)) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup FMPI2CEx_Private_Functions FMPI2C Extended Private Functions - * @{ - */ -/* Private functions are defined in stm32f4xx_hal_fmpi2c_ex.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_FMPI2C_EX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus.h deleted file mode 100644 index 6d1ff4b..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus.h +++ /dev/null @@ -1,790 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpsmbus.h - * @author MCD Application Team - * @brief Header file of FMPSMBUS HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_FMPSMBUS_H -#define STM32F4xx_HAL_FMPSMBUS_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(FMPI2C_CR1_PE) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMPSMBUS - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FMPSMBUS_Exported_Types FMPSMBUS Exported Types - * @{ - */ - -/** @defgroup FMPSMBUS_Configuration_Structure_definition FMPSMBUS Configuration Structure definition - * @brief FMPSMBUS Configuration Structure definition - * @{ - */ -typedef struct -{ - uint32_t Timing; /*!< Specifies the FMPSMBUS_TIMINGR_register value. - This parameter calculated by referring to FMPSMBUS initialization section - in Reference manual */ - uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. - This parameter can be a value of @ref FMPSMBUS_Analog_Filter */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected. - This parameter can be a value of @ref FMPSMBUS_addressing_mode */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref FMPSMBUS_dual_addressing_mode */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address - if dual addressing mode is selected - This parameter can be a value of @ref FMPSMBUS_own_address2_masks. */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref FMPSMBUS_general_call_addressing_mode. */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref FMPSMBUS_nostretch_mode */ - - uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. - This parameter can be a value of @ref FMPSMBUS_packet_error_check_mode */ - - uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. - This parameter can be a value of @ref FMPSMBUS_peripheral_mode */ - - uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits FMPSMBUS_TIMEOUT_register value. - (Enable bits and different timeout values) - This parameter calculated by referring to FMPSMBUS initialization section - in Reference manual */ -} FMPSMBUS_InitTypeDef; -/** - * @} - */ - -/** @defgroup HAL_state_definition HAL state definition - * @brief HAL State definition - * @{ - */ -#define HAL_FMPSMBUS_STATE_RESET (0x00000000U) /*!< FMPSMBUS not yet initialized or disabled */ -#define HAL_FMPSMBUS_STATE_READY (0x00000001U) /*!< FMPSMBUS initialized and ready for use */ -#define HAL_FMPSMBUS_STATE_BUSY (0x00000002U) /*!< FMPSMBUS internal process is ongoing */ -#define HAL_FMPSMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */ -#define HAL_FMPSMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */ -#define HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */ -#define HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */ -#define HAL_FMPSMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */ -#define HAL_FMPSMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */ -#define HAL_FMPSMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */ -/** - * @} - */ - -/** @defgroup FMPSMBUS_Error_Code_definition FMPSMBUS Error Code definition - * @brief FMPSMBUS Error Code definition - * @{ - */ -#define HAL_FMPSMBUS_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_FMPSMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */ -#define HAL_FMPSMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */ -#define HAL_FMPSMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */ -#define HAL_FMPSMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */ -#define HAL_FMPSMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */ -#define HAL_FMPSMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */ -#define HAL_FMPSMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */ -#define HAL_FMPSMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) -#define HAL_FMPSMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ -#define HAL_FMPSMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ -/** - * @} - */ - -/** @defgroup FMPSMBUS_handle_Structure_definition FMPSMBUS handle Structure definition - * @brief FMPSMBUS handle Structure definition - * @{ - */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) -typedef struct __FMPSMBUS_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ -{ - FMPI2C_TypeDef *Instance; /*!< FMPSMBUS registers base address */ - - FMPSMBUS_InitTypeDef Init; /*!< FMPSMBUS communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to FMPSMBUS transfer buffer */ - - uint16_t XferSize; /*!< FMPSMBUS transfer size */ - - __IO uint16_t XferCount; /*!< FMPSMBUS transfer counter */ - - __IO uint32_t XferOptions; /*!< FMPSMBUS transfer options */ - - __IO uint32_t PreviousState; /*!< FMPSMBUS communication Previous state */ - - HAL_LockTypeDef Lock; /*!< FMPSMBUS locking object */ - - __IO uint32_t State; /*!< FMPSMBUS communication state */ - - __IO uint32_t ErrorCode; /*!< FMPSMBUS Error code */ - -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Listen Complete callback */ - void (* ErrorCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Error callback */ - - void (* AddrCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); - /*!< FMPSMBUS Slave Address Match callback */ - - void (* MspInitCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Msp Init callback */ - void (* MspDeInitCallback)(struct __FMPSMBUS_HandleTypeDef *hfmpsmbus); - /*!< FMPSMBUS Msp DeInit callback */ - -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ -} FMPSMBUS_HandleTypeDef; - -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) -/** - * @brief HAL FMPSMBUS Callback ID enumeration definition - */ -typedef enum -{ - HAL_FMPSMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< FMPSMBUS Master Tx Transfer completed callback ID */ - HAL_FMPSMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< FMPSMBUS Master Rx Transfer completed callback ID */ - HAL_FMPSMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< FMPSMBUS Slave Tx Transfer completed callback ID */ - HAL_FMPSMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< FMPSMBUS Slave Rx Transfer completed callback ID */ - HAL_FMPSMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< FMPSMBUS Listen Complete callback ID */ - HAL_FMPSMBUS_ERROR_CB_ID = 0x05U, /*!< FMPSMBUS Error callback ID */ - - HAL_FMPSMBUS_MSPINIT_CB_ID = 0x06U, /*!< FMPSMBUS Msp Init callback ID */ - HAL_FMPSMBUS_MSPDEINIT_CB_ID = 0x07U /*!< FMPSMBUS Msp DeInit callback ID */ - -} HAL_FMPSMBUS_CallbackIDTypeDef; - -/** - * @brief HAL FMPSMBUS Callback pointer definition - */ -typedef void (*pFMPSMBUS_CallbackTypeDef)(FMPSMBUS_HandleTypeDef *hfmpsmbus); -/*!< pointer to an FMPSMBUS callback function */ -typedef void (*pFMPSMBUS_AddrCallbackTypeDef)(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t TransferDirection, - uint16_t AddrMatchCode); -/*!< pointer to an FMPSMBUS Address Match callback function */ - -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FMPSMBUS_Exported_Constants FMPSMBUS Exported Constants - * @{ - */ - -/** @defgroup FMPSMBUS_Analog_Filter FMPSMBUS Analog Filter - * @{ - */ -#define FMPSMBUS_ANALOGFILTER_ENABLE (0x00000000U) -#define FMPSMBUS_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF -/** - * @} - */ - -/** @defgroup FMPSMBUS_addressing_mode FMPSMBUS addressing mode - * @{ - */ -#define FMPSMBUS_ADDRESSINGMODE_7BIT (0x00000001U) -#define FMPSMBUS_ADDRESSINGMODE_10BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup FMPSMBUS_dual_addressing_mode FMPSMBUS dual addressing mode - * @{ - */ - -#define FMPSMBUS_DUALADDRESS_DISABLE (0x00000000U) -#define FMPSMBUS_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN -/** - * @} - */ - -/** @defgroup FMPSMBUS_own_address2_masks FMPSMBUS ownaddress2 masks - * @{ - */ - -#define FMPSMBUS_OA2_NOMASK ((uint8_t)0x00U) -#define FMPSMBUS_OA2_MASK01 ((uint8_t)0x01U) -#define FMPSMBUS_OA2_MASK02 ((uint8_t)0x02U) -#define FMPSMBUS_OA2_MASK03 ((uint8_t)0x03U) -#define FMPSMBUS_OA2_MASK04 ((uint8_t)0x04U) -#define FMPSMBUS_OA2_MASK05 ((uint8_t)0x05U) -#define FMPSMBUS_OA2_MASK06 ((uint8_t)0x06U) -#define FMPSMBUS_OA2_MASK07 ((uint8_t)0x07U) -/** - * @} - */ - - -/** @defgroup FMPSMBUS_general_call_addressing_mode FMPSMBUS general call addressing mode - * @{ - */ -#define FMPSMBUS_GENERALCALL_DISABLE (0x00000000U) -#define FMPSMBUS_GENERALCALL_ENABLE FMPI2C_CR1_GCEN -/** - * @} - */ - -/** @defgroup FMPSMBUS_nostretch_mode FMPSMBUS nostretch mode - * @{ - */ -#define FMPSMBUS_NOSTRETCH_DISABLE (0x00000000U) -#define FMPSMBUS_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup FMPSMBUS_packet_error_check_mode FMPSMBUS packet error check mode - * @{ - */ -#define FMPSMBUS_PEC_DISABLE (0x00000000U) -#define FMPSMBUS_PEC_ENABLE FMPI2C_CR1_PECEN -/** - * @} - */ - -/** @defgroup FMPSMBUS_peripheral_mode FMPSMBUS peripheral mode - * @{ - */ -#define FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_HOST FMPI2C_CR1_SMBHEN -#define FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_SLAVE (0x00000000U) -#define FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_SLAVE_ARP FMPI2C_CR1_SMBDEN -/** - * @} - */ - -/** @defgroup FMPSMBUS_ReloadEndMode_definition FMPSMBUS ReloadEndMode definition - * @{ - */ - -#define FMPSMBUS_SOFTEND_MODE (0x00000000U) -#define FMPSMBUS_RELOAD_MODE FMPI2C_CR2_RELOAD -#define FMPSMBUS_AUTOEND_MODE FMPI2C_CR2_AUTOEND -#define FMPSMBUS_SENDPEC_MODE FMPI2C_CR2_PECBYTE -/** - * @} - */ - -/** @defgroup FMPSMBUS_StartStopMode_definition FMPSMBUS StartStopMode definition - * @{ - */ - -#define FMPSMBUS_NO_STARTSTOP (0x00000000U) -#define FMPSMBUS_GENERATE_STOP (uint32_t)(0x80000000U | FMPI2C_CR2_STOP) -#define FMPSMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN) -#define FMPSMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | FMPI2C_CR2_START) -/** - * @} - */ - -/** @defgroup FMPSMBUS_XferOptions_definition FMPSMBUS XferOptions definition - * @{ - */ - -/* List of XferOptions in usage of : - * 1- Restart condition when direction change - * 2- No Restart condition in other use cases - */ -#define FMPSMBUS_FIRST_FRAME FMPSMBUS_SOFTEND_MODE -#define FMPSMBUS_NEXT_FRAME ((uint32_t)(FMPSMBUS_RELOAD_MODE | FMPSMBUS_SOFTEND_MODE)) -#define FMPSMBUS_FIRST_AND_LAST_FRAME_NO_PEC FMPSMBUS_AUTOEND_MODE -#define FMPSMBUS_LAST_FRAME_NO_PEC FMPSMBUS_AUTOEND_MODE -#define FMPSMBUS_FIRST_FRAME_WITH_PEC ((uint32_t)(FMPSMBUS_SOFTEND_MODE | FMPSMBUS_SENDPEC_MODE)) -#define FMPSMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(FMPSMBUS_AUTOEND_MODE | FMPSMBUS_SENDPEC_MODE)) -#define FMPSMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(FMPSMBUS_AUTOEND_MODE | FMPSMBUS_SENDPEC_MODE)) - -/* List of XferOptions in usage of : - * 1- Restart condition in all use cases (direction change or not) - */ -#define FMPSMBUS_OTHER_FRAME_NO_PEC (0x000000AAU) -#define FMPSMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U) -#define FMPSMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U) -#define FMPSMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U) -/** - * @} - */ - -/** @defgroup FMPSMBUS_Interrupt_configuration_definition FMPSMBUS Interrupt configuration definition - * @brief FMPSMBUS Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define FMPSMBUS_IT_ERRI FMPI2C_CR1_ERRIE -#define FMPSMBUS_IT_TCI FMPI2C_CR1_TCIE -#define FMPSMBUS_IT_STOPI FMPI2C_CR1_STOPIE -#define FMPSMBUS_IT_NACKI FMPI2C_CR1_NACKIE -#define FMPSMBUS_IT_ADDRI FMPI2C_CR1_ADDRIE -#define FMPSMBUS_IT_RXI FMPI2C_CR1_RXIE -#define FMPSMBUS_IT_TXI FMPI2C_CR1_TXIE -#define FMPSMBUS_IT_TX (FMPSMBUS_IT_ERRI | FMPSMBUS_IT_TCI | FMPSMBUS_IT_STOPI | \ - FMPSMBUS_IT_NACKI | FMPSMBUS_IT_TXI) -#define FMPSMBUS_IT_RX (FMPSMBUS_IT_ERRI | FMPSMBUS_IT_TCI | FMPSMBUS_IT_NACKI | \ - FMPSMBUS_IT_RXI) -#define FMPSMBUS_IT_ALERT (FMPSMBUS_IT_ERRI) -#define FMPSMBUS_IT_ADDR (FMPSMBUS_IT_ADDRI | FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI) -/** - * @} - */ - -/** @defgroup FMPSMBUS_Flag_definition FMPSMBUS Flag definition - * @brief Flag definition - * Elements values convention: 0xXXXXYYYY - * - XXXXXXXX : Flag mask - * @{ - */ - -#define FMPSMBUS_FLAG_TXE FMPI2C_ISR_TXE -#define FMPSMBUS_FLAG_TXIS FMPI2C_ISR_TXIS -#define FMPSMBUS_FLAG_RXNE FMPI2C_ISR_RXNE -#define FMPSMBUS_FLAG_ADDR FMPI2C_ISR_ADDR -#define FMPSMBUS_FLAG_AF FMPI2C_ISR_NACKF -#define FMPSMBUS_FLAG_STOPF FMPI2C_ISR_STOPF -#define FMPSMBUS_FLAG_TC FMPI2C_ISR_TC -#define FMPSMBUS_FLAG_TCR FMPI2C_ISR_TCR -#define FMPSMBUS_FLAG_BERR FMPI2C_ISR_BERR -#define FMPSMBUS_FLAG_ARLO FMPI2C_ISR_ARLO -#define FMPSMBUS_FLAG_OVR FMPI2C_ISR_OVR -#define FMPSMBUS_FLAG_PECERR FMPI2C_ISR_PECERR -#define FMPSMBUS_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT -#define FMPSMBUS_FLAG_ALERT FMPI2C_ISR_ALERT -#define FMPSMBUS_FLAG_BUSY FMPI2C_ISR_BUSY -#define FMPSMBUS_FLAG_DIR FMPI2C_ISR_DIR -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros ------------------------------------------------------------*/ -/** @defgroup FMPSMBUS_Exported_Macros FMPSMBUS Exported Macros - * @{ - */ - -/** @brief Reset FMPSMBUS handle state. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @retval None - */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) -#define __HAL_FMPSMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_FMPSMBUS_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_FMPSMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPSMBUS_STATE_RESET) -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - -/** @brief Enable the specified FMPSMBUS interrupts. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref FMPSMBUS_IT_ERRI Errors interrupt enable - * @arg @ref FMPSMBUS_IT_TCI Transfer complete interrupt enable - * @arg @ref FMPSMBUS_IT_STOPI STOP detection interrupt enable - * @arg @ref FMPSMBUS_IT_NACKI NACK received interrupt enable - * @arg @ref FMPSMBUS_IT_ADDRI Address match interrupt enable - * @arg @ref FMPSMBUS_IT_RXI RX interrupt enable - * @arg @ref FMPSMBUS_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_FMPSMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) - -/** @brief Disable the specified FMPSMBUS interrupts. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref FMPSMBUS_IT_ERRI Errors interrupt enable - * @arg @ref FMPSMBUS_IT_TCI Transfer complete interrupt enable - * @arg @ref FMPSMBUS_IT_STOPI STOP detection interrupt enable - * @arg @ref FMPSMBUS_IT_NACKI NACK received interrupt enable - * @arg @ref FMPSMBUS_IT_ADDRI Address match interrupt enable - * @arg @ref FMPSMBUS_IT_RXI RX interrupt enable - * @arg @ref FMPSMBUS_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_FMPSMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) - -/** @brief Check whether the specified FMPSMBUS interrupt source is enabled or not. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @param __INTERRUPT__ specifies the FMPSMBUS interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref FMPSMBUS_IT_ERRI Errors interrupt enable - * @arg @ref FMPSMBUS_IT_TCI Transfer complete interrupt enable - * @arg @ref FMPSMBUS_IT_STOPI STOP detection interrupt enable - * @arg @ref FMPSMBUS_IT_NACKI NACK received interrupt enable - * @arg @ref FMPSMBUS_IT_ADDRI Address match interrupt enable - * @arg @ref FMPSMBUS_IT_RXI RX interrupt enable - * @arg @ref FMPSMBUS_IT_TXI TX interrupt enable - * - * @retval The new state of __IT__ (SET or RESET). - */ -#define __HAL_FMPSMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ - ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified FMPSMBUS flag is set or not. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref FMPSMBUS_FLAG_TXE Transmit data register empty - * @arg @ref FMPSMBUS_FLAG_TXIS Transmit interrupt status - * @arg @ref FMPSMBUS_FLAG_RXNE Receive data register not empty - * @arg @ref FMPSMBUS_FLAG_ADDR Address matched (slave mode) - * @arg @ref FMPSMBUS_FLAG_AF NACK received flag - * @arg @ref FMPSMBUS_FLAG_STOPF STOP detection flag - * @arg @ref FMPSMBUS_FLAG_TC Transfer complete (master mode) - * @arg @ref FMPSMBUS_FLAG_TCR Transfer complete reload - * @arg @ref FMPSMBUS_FLAG_BERR Bus error - * @arg @ref FMPSMBUS_FLAG_ARLO Arbitration lost - * @arg @ref FMPSMBUS_FLAG_OVR Overrun/Underrun - * @arg @ref FMPSMBUS_FLAG_PECERR PEC error in reception - * @arg @ref FMPSMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref FMPSMBUS_FLAG_ALERT SMBus alert - * @arg @ref FMPSMBUS_FLAG_BUSY Bus busy - * @arg @ref FMPSMBUS_FLAG_DIR Transfer direction (slave mode) - * - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define FMPSMBUS_FLAG_MASK (0x0001FFFFU) -#define __HAL_FMPSMBUS_GET_FLAG(__HANDLE__, __FLAG__) \ - (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & FMPSMBUS_FLAG_MASK)) == \ - ((__FLAG__) & FMPSMBUS_FLAG_MASK)) ? SET : RESET) - -/** @brief Clear the FMPSMBUS pending flags which are cleared by writing 1 in a specific bit. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg @ref FMPSMBUS_FLAG_ADDR Address matched (slave mode) - * @arg @ref FMPSMBUS_FLAG_AF NACK received flag - * @arg @ref FMPSMBUS_FLAG_STOPF STOP detection flag - * @arg @ref FMPSMBUS_FLAG_BERR Bus error - * @arg @ref FMPSMBUS_FLAG_ARLO Arbitration lost - * @arg @ref FMPSMBUS_FLAG_OVR Overrun/Underrun - * @arg @ref FMPSMBUS_FLAG_PECERR PEC error in reception - * @arg @ref FMPSMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref FMPSMBUS_FLAG_ALERT SMBus alert - * - * @retval None - */ -#define __HAL_FMPSMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** @brief Enable the specified FMPSMBUS peripheral. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @retval None - */ -#define __HAL_FMPSMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE)) - -/** @brief Disable the specified FMPSMBUS peripheral. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @retval None - */ -#define __HAL_FMPSMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE)) - -/** @brief Generate a Non-Acknowledge FMPSMBUS peripheral in Slave mode. - * @param __HANDLE__ specifies the FMPSMBUS Handle. - * @retval None - */ -#define __HAL_FMPSMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, FMPI2C_CR2_NACK)) - -/** - * @} - */ - - -/* Private constants ---------------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FMPSMBUS_Private_Macro FMPSMBUS Private Macros - * @{ - */ - -#define IS_FMPSMBUS_ANALOG_FILTER(FILTER) (((FILTER) == FMPSMBUS_ANALOGFILTER_ENABLE) || \ - ((FILTER) == FMPSMBUS_ANALOGFILTER_DISABLE)) - -#define IS_FMPSMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) - -#define IS_FMPSMBUS_ADDRESSING_MODE(MODE) (((MODE) == FMPSMBUS_ADDRESSINGMODE_7BIT) || \ - ((MODE) == FMPSMBUS_ADDRESSINGMODE_10BIT)) - -#define IS_FMPSMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPSMBUS_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == FMPSMBUS_DUALADDRESS_ENABLE)) - -#define IS_FMPSMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPSMBUS_OA2_NOMASK) || \ - ((MASK) == FMPSMBUS_OA2_MASK01) || \ - ((MASK) == FMPSMBUS_OA2_MASK02) || \ - ((MASK) == FMPSMBUS_OA2_MASK03) || \ - ((MASK) == FMPSMBUS_OA2_MASK04) || \ - ((MASK) == FMPSMBUS_OA2_MASK05) || \ - ((MASK) == FMPSMBUS_OA2_MASK06) || \ - ((MASK) == FMPSMBUS_OA2_MASK07)) - -#define IS_FMPSMBUS_GENERAL_CALL(CALL) (((CALL) == FMPSMBUS_GENERALCALL_DISABLE) || \ - ((CALL) == FMPSMBUS_GENERALCALL_ENABLE)) - -#define IS_FMPSMBUS_NO_STRETCH(STRETCH) (((STRETCH) == FMPSMBUS_NOSTRETCH_DISABLE) || \ - ((STRETCH) == FMPSMBUS_NOSTRETCH_ENABLE)) - -#define IS_FMPSMBUS_PEC(PEC) (((PEC) == FMPSMBUS_PEC_DISABLE) || \ - ((PEC) == FMPSMBUS_PEC_ENABLE)) - -#define IS_FMPSMBUS_PERIPHERAL_MODE(MODE) (((MODE) == FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_HOST) || \ - ((MODE) == FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_SLAVE) || \ - ((MODE) == FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_SLAVE_ARP)) - -#define IS_FMPSMBUS_TRANSFER_MODE(MODE) (((MODE) == FMPSMBUS_RELOAD_MODE) || \ - ((MODE) == FMPSMBUS_AUTOEND_MODE) || \ - ((MODE) == FMPSMBUS_SOFTEND_MODE) || \ - ((MODE) == FMPSMBUS_SENDPEC_MODE) || \ - ((MODE) == (FMPSMBUS_RELOAD_MODE | FMPSMBUS_SENDPEC_MODE)) || \ - ((MODE) == (FMPSMBUS_AUTOEND_MODE | FMPSMBUS_SENDPEC_MODE)) || \ - ((MODE) == (FMPSMBUS_AUTOEND_MODE | FMPSMBUS_RELOAD_MODE)) || \ - ((MODE) == (FMPSMBUS_AUTOEND_MODE | FMPSMBUS_SENDPEC_MODE | \ - FMPSMBUS_RELOAD_MODE ))) - - -#define IS_FMPSMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPSMBUS_GENERATE_STOP) || \ - ((REQUEST) == FMPSMBUS_GENERATE_START_READ) || \ - ((REQUEST) == FMPSMBUS_GENERATE_START_WRITE) || \ - ((REQUEST) == FMPSMBUS_NO_STARTSTOP)) - - -#define IS_FMPSMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_FMPSMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \ - ((REQUEST) == FMPSMBUS_FIRST_FRAME) || \ - ((REQUEST) == FMPSMBUS_NEXT_FRAME) || \ - ((REQUEST) == FMPSMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ - ((REQUEST) == FMPSMBUS_LAST_FRAME_NO_PEC) || \ - ((REQUEST) == FMPSMBUS_FIRST_FRAME_WITH_PEC) || \ - ((REQUEST) == FMPSMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ - ((REQUEST) == FMPSMBUS_LAST_FRAME_WITH_PEC)) - -#define IS_FMPSMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == FMPSMBUS_OTHER_FRAME_NO_PEC) || \ - ((REQUEST) == FMPSMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \ - ((REQUEST) == FMPSMBUS_OTHER_FRAME_WITH_PEC) || \ - ((REQUEST) == FMPSMBUS_OTHER_AND_LAST_FRAME_WITH_PEC)) - -#define FMPSMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= \ - (uint32_t)~((uint32_t)(FMPI2C_CR1_SMBHEN | FMPI2C_CR1_SMBDEN | \ - FMPI2C_CR1_PECEN))) -#define FMPSMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ - (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | \ - FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | \ - FMPI2C_CR2_RD_WRN))) - -#define FMPSMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPSMBUS_ADDRESSINGMODE_7BIT) ? \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | \ - (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & \ - (~FMPI2C_CR2_RD_WRN)) : \ - (uint32_t)((((uint32_t)(__ADDRESS__) & \ - (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | \ - (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN))) - -#define FMPSMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_ADDCODE) >> 17U) -#define FMPSMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_DIR) >> 16U) -#define FMPSMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & FMPI2C_CR2_AUTOEND) -#define FMPSMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & FMPI2C_CR2_PECBYTE) -#define FMPSMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & FMPI2C_CR1_ALERTEN) - -#define FMPSMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & FMPSMBUS_FLAG_MASK)) == \ - ((__FLAG__) & FMPSMBUS_FLAG_MASK)) ? SET : RESET) -#define FMPSMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) - -#define IS_FMPSMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) -#define IS_FMPSMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) - -/** - * @} - */ - -/* Include FMPSMBUS HAL Extended module */ -#include "stm32f4xx_hal_fmpsmbus_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPSMBUS_Exported_Functions FMPSMBUS Exported Functions - * @{ - */ - -/** @addtogroup FMPSMBUS_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_FMPSMBUS_Init(FMPSMBUS_HandleTypeDef *hfmpsmbus); -HAL_StatusTypeDef HAL_FMPSMBUS_DeInit(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_MspInit(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_MspDeInit(FMPSMBUS_HandleTypeDef *hfmpsmbus); -HAL_StatusTypeDef HAL_FMPSMBUS_ConfigAnalogFilter(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_FMPSMBUS_ConfigDigitalFilter(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t DigitalFilter); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_FMPSMBUS_RegisterCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, - HAL_FMPSMBUS_CallbackIDTypeDef CallbackID, - pFMPSMBUS_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_FMPSMBUS_UnRegisterCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, - HAL_FMPSMBUS_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_FMPSMBUS_RegisterAddrCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, - pFMPSMBUS_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_FMPSMBUS_UnRegisterAddrCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup FMPSMBUS_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -/** @addtogroup Blocking_mode_Polling Blocking mode Polling - * @{ - */ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_FMPSMBUS_IsDeviceReady(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, uint32_t Trials, - uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt - * @{ - */ -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_FMPSMBUS_Master_Transmit_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, - uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPSMBUS_Master_Receive_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, - uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPSMBUS_Master_Abort_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress); -HAL_StatusTypeDef HAL_FMPSMBUS_Slave_Transmit_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_FMPSMBUS_Slave_Receive_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); - -HAL_StatusTypeDef HAL_FMPSMBUS_EnableAlert_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus); -HAL_StatusTypeDef HAL_FMPSMBUS_DisableAlert_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus); -HAL_StatusTypeDef HAL_FMPSMBUS_EnableListen_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus); -HAL_StatusTypeDef HAL_FMPSMBUS_DisableListen_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus); -/** - * @} - */ - -/** @addtogroup FMPSMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* FMPSMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ -void HAL_FMPSMBUS_EV_IRQHandler(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_ER_IRQHandler(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_MasterTxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_MasterRxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_SlaveTxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_SlaveRxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_AddrCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_FMPSMBUS_ListenCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); -void HAL_FMPSMBUS_ErrorCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus); - -/** - * @} - */ - -/** @addtogroup FMPSMBUS_Exported_Functions_Group3 Peripheral State and Errors functions - * @{ - */ - -/* Peripheral State and Errors functions **************************************************/ -uint32_t HAL_FMPSMBUS_GetState(FMPSMBUS_HandleTypeDef *hfmpsmbus); -uint32_t HAL_FMPSMBUS_GetError(FMPSMBUS_HandleTypeDef *hfmpsmbus); - -/** - * @} - */ - -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup FMPSMBUS_Private_Functions FMPSMBUS Private Functions - * @{ - */ -/* Private functions are defined in stm32f4xx_hal_fmpsmbus.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_FMPSMBUS_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus_ex.h deleted file mode 100644 index 001dc54..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpsmbus_ex.h +++ /dev/null @@ -1,136 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpsmbus_ex.h - * @author MCD Application Team - * @brief Header file of FMPSMBUS HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_FMPSMBUS_EX_H -#define STM32F4xx_HAL_FMPSMBUS_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(FMPI2C_CR1_PE) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMPSMBUSEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FMPSMBUSEx_Exported_Constants FMPSMBUS Extended Exported Constants - * @{ - */ - -/** @defgroup FMPSMBUSEx_FastModePlus FMPSMBUS Extended Fast Mode Plus - * @{ - */ -#define FMPSMBUS_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins */ -#define FMPSMBUS_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FMPSMBUSEx_Exported_Macros FMPSMBUS Extended Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPSMBUSEx_Exported_Functions FMPSMBUS Extended Exported Functions - * @{ - */ - -/** @addtogroup FMPSMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions - * @{ - */ -/* Peripheral Control functions ************************************************/ -/** - * @} - */ - -/** @addtogroup FMPSMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions - * @{ - */ -void HAL_FMPSMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus); -void HAL_FMPSMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMPSMBUSEx_Private_Constants FMPSMBUS Extended Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FMPSMBUSEx_Private_Macro FMPSMBUS Extended Private Macros - * @{ - */ -#define IS_FMPSMBUS_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPSMBUS_FASTMODEPLUS_SCL)) == \ - FMPSMBUS_FASTMODEPLUS_SCL) || \ - (((__CONFIG__) & (FMPSMBUS_FASTMODEPLUS_SDA)) == \ - FMPSMBUS_FASTMODEPLUS_SDA)) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup FMPSMBUSEx_Private_Functions FMPSMBUS Extended Private Functions - * @{ - */ -/* Private functions are defined in stm32f4xx_hal_fmpsmbus_ex.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_FMPSMBUS_EX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h deleted file mode 100644 index 5e0b7cc..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h +++ /dev/null @@ -1,1590 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio_ex.h - * @author MCD Application Team - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_EX_H -#define __STM32F4xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection - * @{ - */ - -/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/ -#if defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -/** @brief GPIO_Legacy - */ -#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F427xx || STM32F437xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ -#if defined(STM32F407xx) || defined(STM32F417xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F405xx || STM32F415xx */ - -/*----------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F401xC || STM32F401xE */ -/*----------------------------------------------------------------------------*/ - -/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ -#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ -#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -/*----------------------------------------------------------------------------*/ - -/*--------------- STM32F413xx/STM32F423xx-------------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_DFSDM2 ((uint8_t)0x03) /* DFSDM2 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SAI1 ((uint8_t)0x07) /* SAI1 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ -#define GPIO_AF7_DFSDM2 ((uint8_t)0x07) /* DFSDM2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_SAI1 ((uint8_t)0x0A) /* SAI1 Alternate Function mapping */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_DFSDM2 ((uint8_t)0x0A) /* DFSDM2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ -#define GPIO_AF10_FSMC ((uint8_t)0x0A) /* FSMC Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_UART4 ((uint8_t)0x0B) /* UART4 Alternate Function mapping */ -#define GPIO_AF11_UART5 ((uint8_t)0x0B) /* UART5 Alternate Function mapping */ -#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */ -#define GPIO_AF11_UART10 ((uint8_t)0x0B) /* UART10 Alternate Function mapping */ -#define GPIO_AF11_CAN3 ((uint8_t)0x0B) /* CAN3 Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_RNG ((uint8_t)0x0E) /* RNG Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F413xx || STM32F423xx */ - -/*---------------------------------------- STM32F411xx------------------------*/ -#if defined(STM32F411xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F411xE */ - -/*---------------------------------------- STM32F410xx------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#if defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#endif /* STM32F410Cx || STM32F410Rx */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1 Alternate Function mapping */ -#if defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#endif /* STM32F410Cx || STM32F410Rx */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/*---------------------------------------- STM32F446xx -----------------------*/ -#if defined(STM32F446xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */ -#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */ -#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ -#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions - * @{ - */ -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Constants GPIO Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Macros GPIO Private Macros - * @{ - */ -/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U : 8U) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U :\ - ((__GPIOx__) == (GPIOI))? 8U :\ - ((__GPIOx__) == (GPIOJ))? 9U : 10U) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U : 7U) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 7U) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U : 7U) -#endif /* STM32F446xx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 7U) -#endif /* STM32F412Vx */ -#if defined(STM32F412Rx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U : 7U) -#endif /* STM32F412Rx */ -#if defined(STM32F412Cx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U : 7U) -#endif /* STM32F412Cx */ - -/** - * @} - */ - -/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function - * @{ - */ -/*------------------------- STM32F429xx/STM32F439xx---------------------------*/ -#if defined(STM32F429xx) || defined(STM32F439xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC)) - -#endif /* STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1)) - -#endif /* STM32F427xx || STM32F437xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ -#if defined(STM32F407xx) || defined(STM32F417xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F405xx || STM32F415xx */ - -/*----------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM9) || \ - ((AF) == GPIO_AF3_TIM10) || ((AF) == GPIO_AF3_TIM11) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF7_USART1) || \ - ((AF) == GPIO_AF7_USART2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF15_EVENTOUT)) -#endif /* STM32F401xC || STM32F401xE */ -/*----------------------------------------------------------------------------*/ -/*---------------------------------------- STM32F410xx------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/*---------------------------------------- STM32F411xx------------------------*/ -#if defined(STM32F411xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ - ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------------------------- STM32F446xx ----------------*/ -#if defined(STM32F446xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \ - ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \ - ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------------------- STM32F469xx/STM32F479xx --------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \ - ((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/*----------------------------------------------------------------------------*/ - -/*------------------STM32F413xx/STM32F423xx-----------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 13U)) -#endif /* STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h deleted file mode 100644 index 9a93fbb..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h +++ /dev/null @@ -1,634 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hash.h - * @author MCD Application Team - * @brief Header file of HASH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_HASH_H -#define STM32F4xx_HAL_HASH_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (HASH) -/** @addtogroup HASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup HASH_Exported_Types HASH Exported Types - * @{ - */ - -/** - * @brief HASH Configuration Structure definition - */ -typedef struct -{ - uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit data. - This parameter can be a value of @ref HASH_Data_Type. */ - - uint32_t KeySize; /*!< The key size is used only in HMAC operation. */ - - uint8_t *pKey; /*!< The key is used only in HMAC operation. */ - -} HASH_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_HASH_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ - HAL_HASH_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_HASH_STATE_BUSY = 0x02U, /*!< Processing (hashing) is ongoing */ - HAL_HASH_STATE_TIMEOUT = 0x06U, /*!< Timeout state */ - HAL_HASH_STATE_ERROR = 0x07U, /*!< Error state */ - HAL_HASH_STATE_SUSPENDED = 0x08U /*!< Suspended state */ -} HAL_HASH_StateTypeDef; - -/** - * @brief HAL phase structures definition - */ -typedef enum -{ - HAL_HASH_PHASE_READY = 0x01U, /*!< HASH peripheral is ready to start */ - HAL_HASH_PHASE_PROCESS = 0x02U, /*!< HASH peripheral is in HASH processing phase */ - HAL_HASH_PHASE_HMAC_STEP_1 = 0x03U, /*!< HASH peripheral is in HMAC step 1 processing phase - (step 1 consists in entering the inner hash function key) */ - HAL_HASH_PHASE_HMAC_STEP_2 = 0x04U, /*!< HASH peripheral is in HMAC step 2 processing phase - (step 2 consists in entering the message text) */ - HAL_HASH_PHASE_HMAC_STEP_3 = 0x05U /*!< HASH peripheral is in HMAC step 3 processing phase - (step 3 consists in entering the outer hash function key) */ -} HAL_HASH_PhaseTypeDef; - -/** - * @brief HAL HASH mode suspend definitions - */ -typedef enum -{ - HAL_HASH_SUSPEND_NONE = 0x00U, /*!< HASH peripheral suspension not requested */ - HAL_HASH_SUSPEND = 0x01U /*!< HASH peripheral suspension is requested */ -} HAL_HASH_SuspendTypeDef; - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) -/** - * @brief HAL HASH common Callback ID enumeration definition - */ -typedef enum -{ - HAL_HASH_MSPINIT_CB_ID = 0x00U, /*!< HASH MspInit callback ID */ - HAL_HASH_MSPDEINIT_CB_ID = 0x01U, /*!< HASH MspDeInit callback ID */ - HAL_HASH_INPUTCPLT_CB_ID = 0x02U, /*!< HASH input completion callback ID */ - HAL_HASH_DGSTCPLT_CB_ID = 0x03U, /*!< HASH digest computation completion callback ID */ - HAL_HASH_ERROR_CB_ID = 0x04U, /*!< HASH error callback ID */ -} HAL_HASH_CallbackIDTypeDef; -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - -/** - * @brief HASH Handle Structure definition - */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) -typedef struct __HASH_HandleTypeDef -#else -typedef struct -#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ -{ - HASH_InitTypeDef Init; /*!< HASH required parameters */ - - uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */ - - uint8_t *pHashOutBuffPtr; /*!< Pointer to output buffer (digest) */ - - uint8_t *pHashKeyBuffPtr; /*!< Pointer to key buffer (HMAC only) */ - - uint8_t *pHashMsgBuffPtr; /*!< Pointer to message buffer (HMAC only) */ - - uint32_t HashBuffSize; /*!< Size of buffer to be processed */ - - __IO uint32_t HashInCount; /*!< Counter of inputted data */ - - __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */ - - __IO uint32_t HashKeyCount; /*!< Counter for Key inputted data (HMAC only) */ - - HAL_StatusTypeDef Status; /*!< HASH peripheral status */ - - HAL_HASH_PhaseTypeDef Phase; /*!< HASH peripheral phase */ - - DMA_HandleTypeDef *hdmain; /*!< HASH In DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_HASH_StateTypeDef State; /*!< HASH peripheral state */ - - HAL_HASH_SuspendTypeDef SuspendRequest; /*!< HASH peripheral suspension request flag */ - - FlagStatus DigestCalculationDisable; /*!< Digest calculation phase skip (MDMAT bit control) for multi-buffers DMA-based HMAC computation */ - - __IO uint32_t NbWordsAlreadyPushed; /*!< Numbers of words already pushed in FIFO before inputting new block */ - - __IO uint32_t ErrorCode; /*!< HASH Error code */ - - __IO uint32_t Accumulation; /*!< HASH multi buffers accumulation flag */ - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - void (* InCpltCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH input completion callback */ - - void (* DgstCpltCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH digest computation completion callback */ - - void (* ErrorCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH error callback */ - - void (* MspInitCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH Msp Init callback */ - - void (* MspDeInitCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH Msp DeInit callback */ - -#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ -} HASH_HandleTypeDef; - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) -/** - * @brief HAL HASH Callback pointer definition - */ -typedef void (*pHASH_CallbackTypeDef)(HASH_HandleTypeDef *hhash); /*!< pointer to a HASH common callback functions */ -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HASH_Exported_Constants HASH Exported Constants - * @{ - */ - -/** @defgroup HASH_Algo_Selection HASH algorithm selection - * @{ - */ -#define HASH_ALGOSELECTION_SHA1 0x00000000U /*!< HASH function is SHA1 */ -#define HASH_ALGOSELECTION_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */ -#define HASH_ALGOSELECTION_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */ -#define HASH_ALGOSELECTION_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */ -/** - * @} - */ - -/** @defgroup HASH_Algorithm_Mode HASH algorithm mode - * @{ - */ -#define HASH_ALGOMODE_HASH 0x00000000U /*!< Algorithm is HASH */ -#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */ -/** - * @} - */ - -/** @defgroup HASH_Data_Type HASH input data type - * @{ - */ -#define HASH_DATATYPE_32B 0x00000000U /*!< 32-bit data. No swapping */ -#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */ -#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */ -#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */ -/** - * @} - */ - -/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode HMAC key length type - * @{ - */ -#define HASH_HMAC_KEYTYPE_SHORTKEY 0x00000000U /*!< HMAC Key size is <= 64 bytes */ -#define HASH_HMAC_KEYTYPE_LONGKEY HASH_CR_LKEY /*!< HMAC Key size is > 64 bytes */ -/** - * @} - */ - -/** @defgroup HASH_flags_definition HASH flags definitions - * @{ - */ -#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : a new block can be entered in the Peripheral */ -#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */ -#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */ -#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy, processing a block of data */ -#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : the input buffer contains at least one word of data */ - -/** - * @} - */ - -/** @defgroup HASH_interrupts_definition HASH interrupts definitions - * @{ - */ -#define HASH_IT_DINI HASH_IMR_DINIE /*!< A new block can be entered into the input buffer (DIN) */ -#define HASH_IT_DCI HASH_IMR_DCIE /*!< Digest calculation complete */ - -/** - * @} - */ - -/** @defgroup HASH_Error_Definition HASH Error Definition - * @{ - */ -#define HAL_HASH_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_HASH_ERROR_IT 0x00000001U /*!< IT-based process error */ -#define HAL_HASH_ERROR_DMA 0x00000002U /*!< DMA-based process error */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) -#define HAL_HASH_ERROR_INVALID_CALLBACK 0x00000004U /*!< Invalid Callback error */ -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup HASH_Exported_Macros HASH Exported Macros - * @{ - */ - -/** @brief Check whether or not the specified HASH flag is set. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer. - * @arg @ref HASH_FLAG_DCIS Digest calculation complete. - * @arg @ref HASH_FLAG_DMAS DMA interface is enabled (DMAE=1) or a transfer is ongoing. - * @arg @ref HASH_FLAG_BUSY The hash core is Busy : processing a block of data. - * @arg @ref HASH_FLAG_DINNE DIN not empty : the input buffer contains at least one word of data. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? \ - ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\ - ((HASH->SR & (__FLAG__)) == (__FLAG__)) ) - - -/** @brief Clear the specified HASH flag. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be one of the following values: - * @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer. - * @arg @ref HASH_FLAG_DCIS Digest calculation complete - * @retval None - */ -#define __HAL_HASH_CLEAR_FLAG(__FLAG__) CLEAR_BIT(HASH->SR, (__FLAG__)) - - -/** @brief Enable the specified HASH interrupt. - * @param __INTERRUPT__ specifies the HASH interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN) - * @arg @ref HASH_IT_DCI Digest calculation complete - * @retval None - */ -#define __HAL_HASH_ENABLE_IT(__INTERRUPT__) SET_BIT(HASH->IMR, (__INTERRUPT__)) - -/** @brief Disable the specified HASH interrupt. - * @param __INTERRUPT__ specifies the HASH interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN) - * @arg @ref HASH_IT_DCI Digest calculation complete - * @retval None - */ -#define __HAL_HASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(HASH->IMR, (__INTERRUPT__)) - -/** @brief Reset HASH handle state. - * @param __HANDLE__ HASH handle. - * @retval None - */ - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) -#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) do{\ - (__HANDLE__)->State = HAL_HASH_STATE_RESET;\ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - }while(0) -#else -#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET) -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - -/** @brief Reset HASH handle status. - * @param __HANDLE__ HASH handle. - * @retval None - */ -#define __HAL_HASH_RESET_HANDLE_STATUS(__HANDLE__) ((__HANDLE__)->Status = HAL_OK) - -/** - * @brief Enable the multi-buffer DMA transfer mode. - * @note This bit is set when hashing large files when multiple DMA transfers are needed. - * @retval None - */ -#define __HAL_HASH_SET_MDMAT() SET_BIT(HASH->CR, HASH_CR_MDMAT) - -/** - * @brief Disable the multi-buffer DMA transfer mode. - * @retval None - */ -#define __HAL_HASH_RESET_MDMAT() CLEAR_BIT(HASH->CR, HASH_CR_MDMAT) - - -/** - * @brief Start the digest computation. - * @retval None - */ -#define __HAL_HASH_START_DIGEST() SET_BIT(HASH->STR, HASH_STR_DCAL) - -/** - * @brief Set the number of valid bits in the last word written in data register DIN. - * @param __SIZE__ size in bytes of last data written in Data register. - * @retval None - */ -#define __HAL_HASH_SET_NBVALIDBITS(__SIZE__) MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * ((__SIZE__) % 4U)) - -/** - * @brief Reset the HASH core. - * @retval None - */ -#define __HAL_HASH_INIT() SET_BIT(HASH->CR, HASH_CR_INIT) - -/** - * @} - */ - - -/* Private macros --------------------------------------------------------*/ -/** @defgroup HASH_Private_Macros HASH Private Macros - * @{ - */ -/** - * @brief Return digest length in bytes. - * @retval Digest length - */ -#if defined(HASH_CR_MDMAT) -#define HASH_DIGEST_LENGTH() ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA1) ? 20U : \ - ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA224) ? 28U : \ - ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA256) ? 32U : 16U ) ) ) -#else -#define HASH_DIGEST_LENGTH() ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA1) ? 20U : 16) -#endif /* HASH_CR_MDMAT*/ -/** - * @brief Return number of words already pushed in the FIFO. - * @retval Number of words already pushed in the FIFO - */ -#define HASH_NBW_PUSHED() ((READ_BIT(HASH->CR, HASH_CR_NBW)) >> 8U) - -/** - * @brief Ensure that HASH input data type is valid. - * @param __DATATYPE__ HASH input data type. - * @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid) - */ -#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \ - ((__DATATYPE__) == HASH_DATATYPE_16B)|| \ - ((__DATATYPE__) == HASH_DATATYPE_8B) || \ - ((__DATATYPE__) == HASH_DATATYPE_1B)) - -/** - * @brief Ensure that input data buffer size is valid for multi-buffer HASH - * processing in DMA mode. - * @note This check is valid only for multi-buffer HASH processing in DMA mode. - * @param __SIZE__ input data buffer size. - * @retval SET (__SIZE__ is valid) or RESET (__SIZE__ is invalid) - */ -#define IS_HASH_DMA_MULTIBUFFER_SIZE(__SIZE__) ((READ_BIT(HASH->CR, HASH_CR_MDMAT) == 0U) || (((__SIZE__) % 4U) == 0U)) - -/** - * @brief Ensure that input data buffer size is valid for multi-buffer HMAC - * processing in DMA mode. - * @note This check is valid only for multi-buffer HMAC processing in DMA mode. - * @param __HANDLE__ HASH handle. - * @param __SIZE__ input data buffer size. - * @retval SET (__SIZE__ is valid) or RESET (__SIZE__ is invalid) - */ -#define IS_HMAC_DMA_MULTIBUFFER_SIZE(__HANDLE__,__SIZE__) ((((__HANDLE__)->DigestCalculationDisable) == RESET)\ - || (((__SIZE__) % 4U) == 0U)) -/** - * @brief Ensure that handle phase is set to HASH processing. - * @param __HANDLE__ HASH handle. - * @retval SET (handle phase is set to HASH processing) or RESET (handle phase is not set to HASH processing) - */ -#define IS_HASH_PROCESSING(__HANDLE__) ((__HANDLE__)->Phase == HAL_HASH_PHASE_PROCESS) - -/** - * @brief Ensure that handle phase is set to HMAC processing. - * @param __HANDLE__ HASH handle. - * @retval SET (handle phase is set to HMAC processing) or RESET (handle phase is not set to HMAC processing) - */ -#define IS_HMAC_PROCESSING(__HANDLE__) (((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || \ - ((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_2) || \ - ((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_3)) - -/** - * @} - */ - -/* Include HASH HAL Extended module */ -#include "stm32f4xx_hal_hash_ex.h" -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup HASH_Exported_Functions HASH Exported Functions - * @{ - */ - -/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization/de-initialization methods **********************************/ -HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash); -HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash); -void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash); -void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash); -void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash); -void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash); -void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash); -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID, - pHASH_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group2 HASH processing functions in polling mode - * @{ - */ - - -/* HASH processing using polling *********************************************/ -HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); - - -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group3 HASH processing functions in interrupt mode - * @{ - */ - -/* HASH processing using IT **************************************************/ -HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group4 HASH processing functions in DMA mode - * @{ - */ - -/* HASH processing using DMA *************************************************/ -HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout); - -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group5 HMAC processing functions in polling mode - * @{ - */ - -/* HASH-MAC processing using polling *****************************************/ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout); -HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout); - -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group6 HMAC processing functions in interrupt mode - * @{ - */ - -HAL_StatusTypeDef HAL_HMAC_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HMAC_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); - -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group7 HMAC processing functions in DMA mode - * @{ - */ - -/* HASH-HMAC processing using DMA ********************************************/ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); - -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group8 Peripheral states functions - * @{ - */ - - -/* Peripheral State methods **************************************************/ -HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash); -HAL_StatusTypeDef HAL_HASH_GetStatus(HASH_HandleTypeDef *hhash); -void HAL_HASH_ContextSaving(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer); -void HAL_HASH_ContextRestoring(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer); -void HAL_HASH_SwFeed_ProcessSuspend(HASH_HandleTypeDef *hhash); -HAL_StatusTypeDef HAL_HASH_DMAFeed_ProcessSuspend(HASH_HandleTypeDef *hhash); -uint32_t HAL_HASH_GetError(HASH_HandleTypeDef *hhash); - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions -----------------------------------------------------------*/ - -/** @addtogroup HASH_Private_Functions HASH Private Functions - * @{ - */ - -/* Private functions */ -HAL_StatusTypeDef HASH_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout, uint32_t Algorithm); -HAL_StatusTypeDef HASH_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm); -HAL_StatusTypeDef HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm); -HAL_StatusTypeDef HASH_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Algorithm); -HAL_StatusTypeDef HASH_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm); -HAL_StatusTypeDef HASH_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HMAC_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout, uint32_t Algorithm); -HAL_StatusTypeDef HMAC_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Algorithm); -HAL_StatusTypeDef HMAC_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm); - -/** - * @} - */ - -/** - * @} - */ -#endif /* HASH*/ -/** - * @} - */ - - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_HASH_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h deleted file mode 100644 index 91e65dc..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h +++ /dev/null @@ -1,175 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hash_ex.h - * @author MCD Application Team - * @brief Header file of HASH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_HASH_EX_H -#define STM32F4xx_HAL_HASH_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (HASH) -/** @addtogroup HASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ - - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup HASHEx_Exported_Functions HASH Extended Exported Functions - * @{ - */ - -/** @addtogroup HASHEx_Exported_Functions_Group1 HASH extended processing functions in polling mode - * @{ - */ - -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); - -/** - * @} - */ - -/** @addtogroup HASHEx_Exported_Functions_Group2 HASH extended processing functions in interrupt mode - * @{ - */ - -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); - -/** - * @} - */ - -/** @addtogroup HASHEx_Exported_Functions_Group3 HASH extended processing functions in DMA mode - * @{ - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout); - -/** - * @} - */ - -/** @addtogroup HASHEx_Exported_Functions_Group4 HMAC extended processing functions in polling mode - * @{ - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup HASHEx_Exported_Functions_Group5 HMAC extended processing functions in interrupt mode - * @{ - */ - -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer); - -/** - * @} - */ - -/** @addtogroup HASHEx_Exported_Functions_Group6 HMAC extended processing functions in DMA mode - * @{ - */ - -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); - -/** - * @} - */ - -/** @addtogroup HASHEx_Exported_Functions_Group7 Multi-buffer HMAC extended processing functions in DMA mode - * @{ - */ - -HAL_StatusTypeDef HAL_HMACEx_MD5_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); - -HAL_StatusTypeDef HAL_HMACEx_SHA1_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA224_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); - -HAL_StatusTypeDef HAL_HMACEx_SHA256_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* HASH*/ -/** - * @} - */ - - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_HASH_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h deleted file mode 100644 index 31ad99c..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h +++ /dev/null @@ -1,115 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c_ex.h - * @author MCD Application Team - * @brief Header file of I2C HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_EX_H -#define __STM32F4xx_HAL_I2C_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2CEx_Analog_Filter I2C Analog Filter - * @{ - */ -#define I2C_ANALOGFILTER_ENABLE 0x00000000U -#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2CEx_Exported_Functions - * @{ - */ - -/** @addtogroup I2CEx_Exported_Functions_Group1 - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macros I2C Private Macros - * @{ - */ -#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == I2C_ANALOGFILTER_DISABLE)) -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_I2C_EX_H */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h deleted file mode 100644 index 3aaa45b..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h +++ /dev/null @@ -1,183 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s_ex.h - * @author MCD Application Team - * @brief Header file of I2S HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_I2S_EX_H -#define STM32F4xx_HAL_I2S_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined(SPI_I2S_FULLDUPLEX_SUPPORT) -/** @addtogroup I2SEx I2SEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup I2SEx_Exported_Macros I2S Extended Exported Macros - * @{ - */ - -#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE)) - -/** @brief Enable or disable the specified I2SExt peripheral. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE) -#define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE) - -/** @brief Enable or disable the specified I2SExt interrupts. - * @param __HANDLE__ specifies the I2S Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__)) -#define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__)) - -/** @brief Checks if the specified I2SExt interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the I2S Handle. - * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. - * @param __INTERRUPT__ specifies the I2S interrupt source to check. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2SExt flag is set or not. - * @param __HANDLE__ specifies the I2S Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2S_FLAG_RXNE: Receive buffer not empty flag - * @arg I2S_FLAG_TXE: Transmit buffer empty flag - * @arg I2S_FLAG_UDR: Underrun flag - * @arg I2S_FLAG_OVR: Overrun flag - * @arg I2S_FLAG_FRE: Frame error flag - * @arg I2S_FLAG_CHSIDE: Channel Side flag - * @arg I2S_FLAG_BSY: Busy flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the I2SExt OVR pending flag. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{ \ - __IO uint32_t tmpreg_ovr = 0x00U; \ - tmpreg_ovr = I2SxEXT((__HANDLE__)->Instance)->DR;\ - tmpreg_ovr = I2SxEXT((__HANDLE__)->Instance)->SR;\ - UNUSED(tmpreg_ovr); \ - }while(0U) -/** @brief Clears the I2SExt UDR pending flag. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__) do{ \ - __IO uint32_t tmpreg_udr = 0x00U; \ - tmpreg_udr = I2SxEXT((__HANDLE__)->Instance)->SR;\ - UNUSED(tmpreg_udr); \ - }while(0U) -/** @brief Flush the I2S and I2SExt DR Registers. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_FLUSH_RX_DR(__HANDLE__) do{ \ - __IO uint32_t tmpreg_dr = 0x00U; \ - tmpreg_dr = I2SxEXT((__HANDLE__)->Instance)->DR; \ - tmpreg_dr = ((__HANDLE__)->Instance->DR); \ - UNUSED(tmpreg_dr); \ - }while(0U) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions - * @{ - */ - -/** @addtogroup I2SEx_Exported_Functions_Group1 I2S Extended IO operation functions - * @{ - */ - -/* Extended features functions *************************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, - uint16_t Size, uint32_t Timeout); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, - uint16_t Size); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, - uint16_t Size); -/* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2SEx_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s); -void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_I2S_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_lptim.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_lptim.h deleted file mode 100644 index 7a41ee9..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_lptim.h +++ /dev/null @@ -1,857 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_lptim.h - * @author MCD Application Team - * @brief Header file of LPTIM HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_LPTIM_H -#define STM32F4xx_HAL_LPTIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (LPTIM1) - -/** @addtogroup LPTIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup LPTIM_Exported_Types LPTIM Exported Types - * @{ - */ -#define LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR_MR23 /*!< External interrupt line 23 Connected to the LPTIM EXTI Line */ - -/** - * @brief LPTIM Clock configuration definition - */ -typedef struct -{ - uint32_t Source; /*!< Selects the clock source. - This parameter can be a value of @ref LPTIM_Clock_Source */ - - uint32_t Prescaler; /*!< Specifies the counter clock Prescaler. - This parameter can be a value of @ref LPTIM_Clock_Prescaler */ - -} LPTIM_ClockConfigTypeDef; - -/** - * @brief LPTIM Clock configuration definition - */ -typedef struct -{ - uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit - if the ULPTIM input is selected. - Note: This parameter is used only when Ultra low power clock source is used. - Note: If the polarity is configured on 'both edges', an auxiliary clock - (one of the Low power oscillator) must be active. - This parameter can be a value of @ref LPTIM_Clock_Polarity */ - - uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter. - Note: This parameter is used only when Ultra low power clock source is used. - This parameter can be a value of @ref LPTIM_Clock_Sample_Time */ - -} LPTIM_ULPClockConfigTypeDef; - -/** - * @brief LPTIM Trigger configuration definition - */ -typedef struct -{ - uint32_t Source; /*!< Selects the Trigger source. - This parameter can be a value of @ref LPTIM_Trigger_Source */ - - uint32_t ActiveEdge; /*!< Selects the Trigger active edge. - Note: This parameter is used only when an external trigger is used. - This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */ - - uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter. - Note: This parameter is used only when an external trigger is used. - This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */ -} LPTIM_TriggerConfigTypeDef; - -/** - * @brief LPTIM Initialization Structure definition - */ -typedef struct -{ - LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */ - - LPTIM_ULPClockConfigTypeDef UltraLowPowerClock;/*!< Specifies the Ultra Low Power clock parameters */ - - LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */ - - uint32_t OutputPolarity; /*!< Specifies the Output polarity. - This parameter can be a value of @ref LPTIM_Output_Polarity */ - - uint32_t UpdateMode; /*!< Specifies whether the update of the autoreload and the compare - values is done immediately or after the end of current period. - This parameter can be a value of @ref LPTIM_Updating_Mode */ - - uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event - or each external event. - This parameter can be a value of @ref LPTIM_Counter_Source */ -} LPTIM_InitTypeDef; - -/** - * @brief HAL LPTIM State structure definition - */ -typedef enum -{ - HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ - HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ - HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ - HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */ -} HAL_LPTIM_StateTypeDef; - -/** - * @brief LPTIM handle Structure definition - */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -typedef struct __LPTIM_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ -{ - LPTIM_TypeDef *Instance; /*!< Register base address */ - - LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */ - - HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */ - - HAL_LockTypeDef Lock; /*!< LPTIM locking object */ - - __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */ - -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - void (* MspInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp Init Callback */ - void (* MspDeInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp DeInit Callback */ - void (* CompareMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare match Callback */ - void (* AutoReloadMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload match Callback */ - void (* TriggerCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< External trigger event detection Callback */ - void (* CompareWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare register write complete Callback */ - void (* AutoReloadWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload register write complete Callback */ - void (* DirectionUpCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Up-counting direction change Callback */ - void (* DirectionDownCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Down-counting direction change Callback */ -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ -} LPTIM_HandleTypeDef; - -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -/** - * @brief HAL LPTIM Callback ID enumeration definition - */ -typedef enum -{ - HAL_LPTIM_MSPINIT_CB_ID = 0x00U, /*!< LPTIM Base Msp Init Callback ID */ - HAL_LPTIM_MSPDEINIT_CB_ID = 0x01U, /*!< LPTIM Base Msp DeInit Callback ID */ - HAL_LPTIM_COMPARE_MATCH_CB_ID = 0x02U, /*!< Compare match Callback ID */ - HAL_LPTIM_AUTORELOAD_MATCH_CB_ID = 0x03U, /*!< Auto-reload match Callback ID */ - HAL_LPTIM_TRIGGER_CB_ID = 0x04U, /*!< External trigger event detection Callback ID */ - HAL_LPTIM_COMPARE_WRITE_CB_ID = 0x05U, /*!< Compare register write complete Callback ID */ - HAL_LPTIM_AUTORELOAD_WRITE_CB_ID = 0x06U, /*!< Auto-reload register write complete Callback ID */ - HAL_LPTIM_DIRECTION_UP_CB_ID = 0x07U, /*!< Up-counting direction change Callback ID */ - HAL_LPTIM_DIRECTION_DOWN_CB_ID = 0x08U, /*!< Down-counting direction change Callback ID */ -} HAL_LPTIM_CallbackIDTypeDef; - -/** - * @brief HAL TIM Callback pointer definition - */ -typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< pointer to the LPTIM callback function */ - -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants - * @{ - */ - -/** @defgroup LPTIM_Clock_Source LPTIM Clock Source - * @{ - */ -#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC 0x00000000U -#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL -/** - * @} - */ - -/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler - * @{ - */ -#define LPTIM_PRESCALER_DIV1 0x00000000U -#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0 -#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1 -#define LPTIM_PRESCALER_DIV8 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1) -#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2 -#define LPTIM_PRESCALER_DIV32 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2) -#define LPTIM_PRESCALER_DIV64 (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2) -#define LPTIM_PRESCALER_DIV128 LPTIM_CFGR_PRESC -/** - * @} - */ - -/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity - * @{ - */ - -#define LPTIM_OUTPUTPOLARITY_HIGH 0x00000000U -#define LPTIM_OUTPUTPOLARITY_LOW LPTIM_CFGR_WAVPOL -/** - * @} - */ - -/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time - * @{ - */ -#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION 0x00000000U -#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0 -#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1 -#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT -/** - * @} - */ - -/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity - * @{ - */ -#define LPTIM_CLOCKPOLARITY_RISING 0x00000000U -#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0 -#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1 -/** - * @} - */ - -/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source - * @{ - */ -#define LPTIM_TRIGSOURCE_SOFTWARE 0x0000FFFFU -#define LPTIM_TRIGSOURCE_0 0x00000000U -#define LPTIM_TRIGSOURCE_1 LPTIM_CFGR_TRIGSEL_0 -#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1 -#define LPTIM_TRIGSOURCE_3 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1) -#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2 -#define LPTIM_TRIGSOURCE_5 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2) -/** - * @} - */ - -/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity - * @{ - */ -#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0 -#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1 -#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN -/** - * @} - */ - -/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time - * @{ - */ -#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION 0x00000000U -#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0 -#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1 -#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT -/** - * @} - */ - -/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode - * @{ - */ - -#define LPTIM_UPDATE_IMMEDIATE 0x00000000U -#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD -/** - * @} - */ - -/** @defgroup LPTIM_Counter_Source LPTIM Counter Source - * @{ - */ - -#define LPTIM_COUNTERSOURCE_INTERNAL 0x00000000U -#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE -/** - * @} - */ - -/** @defgroup LPTIM_Flag_Definition LPTIM Flags Definition - * @{ - */ - -#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN -#define LPTIM_FLAG_UP LPTIM_ISR_UP -#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK -#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK -#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG -#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM -#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM -/** - * @} - */ - -/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition - * @{ - */ -#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE -#define LPTIM_IT_UP LPTIM_IER_UPIE -#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE -#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE -#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE -#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE -#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE -/** - * @} - */ - -/** @defgroup LPTIM_Option Register Definition - * @{ - */ -#define LPTIM_OP_PAD_AF 0x00000000U -#define LPTIM_OP_PAD_PA4 LPTIM_OR_LPT_IN1_RMP_0 -#define LPTIM_OP_PAD_PB9 LPTIM_OR_LPT_IN1_RMP_1 -#define LPTIM_OP_TIM_DAC LPTIM_OR_LPT_IN1_RMP -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros - * @{ - */ - -/** @brief Reset LPTIM handle state. - * @param __HANDLE__ LPTIM handle - * @retval None - */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET) -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - -/** - * @brief Enable the LPTIM peripheral. - * @param __HANDLE__ LPTIM handle - * @retval None - */ -#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE)) - -/** - * @brief Disable the LPTIM peripheral. - * @param __HANDLE__ LPTIM handle - * @note The following sequence is required to solve LPTIM disable HW limitation. - * Please check Errata Sheet ES0335 for more details under "MCU may remain - * stuck in LPTIM interrupt when entering Stop mode" section. - * @note Please call @ref HAL_LPTIM_GetState() after a call to __HAL_LPTIM_DISABLE to - * check for TIMEOUT. - * @retval None - */ -#define __HAL_LPTIM_DISABLE(__HANDLE__) LPTIM_Disable(__HANDLE__) - -/** - * @brief Start the LPTIM peripheral in Continuous mode. - * @param __HANDLE__ LPTIM handle - * @retval None - */ -#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT) -/** - * @brief Start the LPTIM peripheral in single mode. - * @param __HANDLE__ LPTIM handle - * @retval None - */ -#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT) - -/** - * @brief Write the passed parameter in the Autoreload register. - * @param __HANDLE__ LPTIM handle - * @param __VALUE__ Autoreload value - * @retval None - * @note The ARR register can only be modified when the LPTIM instance is enabled. - */ -#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__)) - -/** - * @brief Write the passed parameter in the Compare register. - * @param __HANDLE__ LPTIM handle - * @param __VALUE__ Compare value - * @retval None - * @note The CMP register can only be modified when the LPTIM instance is enabled. - */ -#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__)) - -/** - * @brief Check whether the specified LPTIM flag is set or not. - * @param __HANDLE__ LPTIM handle - * @param __FLAG__ LPTIM flag to check - * This parameter can be a value of: - * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag. - * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag. - * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag. - * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag. - * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag. - * @arg LPTIM_FLAG_ARRM : Autoreload match Flag. - * @arg LPTIM_FLAG_CMPM : Compare match Flag. - * @retval The state of the specified flag (SET or RESET). - */ -#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear the specified LPTIM flag. - * @param __HANDLE__ LPTIM handle. - * @param __FLAG__ LPTIM flag to clear. - * This parameter can be a value of: - * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag. - * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag. - * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag. - * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag. - * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag. - * @arg LPTIM_FLAG_ARRM : Autoreload match Flag. - * @arg LPTIM_FLAG_CMPM : Compare match Flag. - * @retval None. - */ -#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** - * @brief Enable the specified LPTIM interrupt. - * @param __HANDLE__ LPTIM handle. - * @param __INTERRUPT__ LPTIM interrupt to set. - * This parameter can be a value of: - * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. - * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. - * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. - * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt. - * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. - * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. - * @arg LPTIM_IT_CMPM : Compare match Interrupt. - * @retval None. - * @note The LPTIM interrupts can only be enabled when the LPTIM instance is disabled. - */ -#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** - * @brief Disable the specified LPTIM interrupt. - * @param __HANDLE__ LPTIM handle. - * @param __INTERRUPT__ LPTIM interrupt to set. - * This parameter can be a value of: - * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. - * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. - * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. - * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt. - * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. - * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. - * @arg LPTIM_IT_CMPM : Compare match Interrupt. - * @retval None. - * @note The LPTIM interrupts can only be disabled when the LPTIM instance is disabled. - */ -#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) - -/** - * @brief Check whether the specified LPTIM interrupt source is enabled or not. - * @param __HANDLE__ LPTIM handle. - * @param __INTERRUPT__ LPTIM interrupt to check. - * This parameter can be a value of: - * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. - * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. - * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. - * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt. - * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. - * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. - * @arg LPTIM_IT_CMPM : Compare match Interrupt. - * @retval Interrupt status. - */ - -#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief LPTIM Option Register - * @param __HANDLE__ LPTIM handle - * @param __VALUE__ This parameter can be a value of : - * @arg LPTIM_OP_PAD_AF - * @arg LPTIM_OP_PAD_PA4 - * @arg LPTIM_OP_PAD_PB9 - * @arg LPTIM_OP_TIM_DAC - * @retval None - */ -#define __HAL_LPTIM_OPTR_CONFIG(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->OR = (__VALUE__)) - - -/** - * @brief Enable interrupt on the LPTIM Wake-up Timer associated Exti line. - * @retval None - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR\ - |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable interrupt on the LPTIM Wake-up Timer associated Exti line. - * @retval None - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR\ - &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable event on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR\ - |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable event on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR\ - &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)) -#if defined(EXTI_IMR_MR23) - -/** - * @brief Enable falling edge trigger on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR\ - |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable falling edge trigger on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR\ - &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable rising edge trigger on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR\ - |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable rising edge trigger on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR\ - &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\ - __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\ - }while(0) - -/** - * @brief Disable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\ - __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\ - }while(0) - -/** - * @brief Check whether the LPTIM Wake-up Timer associated Exti line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR\ - & LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Clear the LPTIM Wake-up Timer associated Exti line flag. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR\ - = LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Generate a Software interrupt on the LPTIM Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER\ - |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT) -#endif /* EXTI_IMR_MR23 */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions - * @{ - */ - -/** @addtogroup LPTIM_Exported_Functions_Group1 - * @brief Initialization and Configuration functions. - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim); -HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim); - -/* MSP functions *************************************************************/ -void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim); -/** - * @} - */ - -/** @addtogroup LPTIM_Exported_Functions_Group2 - * @brief Start-Stop operation functions. - * @{ - */ -/* Start/Stop operation functions *********************************************/ -/* ################################# PWM Mode ################################*/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); -HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); -HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim); - -/* ############################# One Pulse Mode ##############################*/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim); - -/* ############################## Set once Mode ##############################*/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim); - -/* ############################### Encoder Mode ##############################*/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period); -HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period); -HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim); - -/* ############################# Time out Mode ##############################*/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout); -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout); -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim); - -/* ############################## Counter Mode ###############################*/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period); -HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period); -HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim); -/** - * @} - */ - -/** @addtogroup LPTIM_Exported_Functions_Group3 - * @brief Read operation functions. - * @{ - */ -/* Reading operation functions ************************************************/ -uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim); -uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim); -uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim); -/** - * @} - */ - -/** @addtogroup LPTIM_Exported_Functions_Group4 - * @brief LPTIM IRQ handler and callback functions. - * @{ - */ -/* LPTIM IRQ functions *******************************************************/ -void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim); - -/* CallBack functions ********************************************************/ -void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim); -void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, - pLPTIM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup LPTIM_Group5 - * @brief Peripheral State functions. - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup LPTIM_Private_Types LPTIM Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup LPTIM_Private_Variables LPTIM Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup LPTIM_Private_Constants LPTIM Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup LPTIM_Private_Macros LPTIM Private Macros - * @{ - */ - -#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \ - ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)) - - -#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \ - ((__PRESCALER__) == LPTIM_PRESCALER_DIV128)) - -#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1) - -#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \ - ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH)) - -#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \ - ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \ - ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \ - ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS)) - -#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \ - ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \ - ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING)) - -#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \ - ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \ - ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \ - ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \ - ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \ - ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \ - ((__TRIG__) == LPTIM_TRIGSOURCE_5)) - -#define IS_LPTIM_EXT_TRG_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING ) || \ - ((__POLARITY__) == LPTIM_ACTIVEEDGE_FALLING ) || \ - ((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING_FALLING )) - -#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \ - ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \ - ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \ - ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS )) - -#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \ - ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD)) - -#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \ - ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL)) - -#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((0x00000001UL <= (__AUTORELOAD__)) &&\ - ((__AUTORELOAD__) <= 0x0000FFFFUL)) - -#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFUL) - -#define IS_LPTIM_PERIOD(__PERIOD__) ((0x00000001UL <= (__PERIOD__)) &&\ - ((__PERIOD__) <= 0x0000FFFFUL)) - -#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFFUL) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup LPTIM_Private_Functions LPTIM Private Functions - * @{ - */ -void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim); -/** - * @} - */ - -/** - * @} - */ - -#endif /* LPTIM1 */ -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_LPTIM_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h deleted file mode 100644 index ab951d3..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h +++ /dev/null @@ -1,719 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_ltdc.h - * @author MCD Application Team - * @brief Header file of LTDC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_LTDC_H -#define STM32F4xx_HAL_LTDC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (LTDC) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup LTDC LTDC - * @brief LTDC HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup LTDC_Exported_Types LTDC Exported Types - * @{ - */ -#define MAX_LAYER 2U - -/** - * @brief LTDC color structure definition - */ -typedef struct -{ - uint8_t Blue; /*!< Configures the blue value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint8_t Green; /*!< Configures the green value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint8_t Red; /*!< Configures the red value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint8_t Reserved; /*!< Reserved 0xFF */ -} LTDC_ColorTypeDef; - -/** - * @brief LTDC Init structure definition - */ -typedef struct -{ - uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity. - This parameter can be one value of @ref LTDC_HS_POLARITY */ - - uint32_t VSPolarity; /*!< configures the vertical synchronization polarity. - This parameter can be one value of @ref LTDC_VS_POLARITY */ - - uint32_t DEPolarity; /*!< configures the data enable polarity. - This parameter can be one of value of @ref LTDC_DE_POLARITY */ - - uint32_t PCPolarity; /*!< configures the pixel clock polarity. - This parameter can be one of value of @ref LTDC_PC_POLARITY */ - - uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width. - This parameter must be a number between - Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height. - This parameter must be a number between - Min_Data = 0x000 and Max_Data = 0x7FF. */ - - uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width. - This parameter must be a number between - Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */ - - uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height. - This parameter must be a number between - Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */ - - uint32_t AccumulatedActiveW; /*!< configures the accumulated active width. - This parameter must be a number between - Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */ - - uint32_t AccumulatedActiveH; /*!< configures the accumulated active height. - This parameter must be a number between - Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */ - - uint32_t TotalWidth; /*!< configures the total width. - This parameter must be a number between - Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */ - - uint32_t TotalHeigh; /*!< configures the total height. - This parameter must be a number between - Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */ - - LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */ -} LTDC_InitTypeDef; - -/** - * @brief LTDC Layer structure definition - */ -typedef struct -{ - uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position. - This parameter must be a number between - Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position. - This parameter must be a number between - Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t WindowY0; /*!< Configures the Window vertical Start Position. - This parameter must be a number between - Min_Data = 0x000 and Max_Data = 0x7FF. */ - - uint32_t WindowY1; /*!< Configures the Window vertical Stop Position. - This parameter must be a number between - Min_Data = 0x0000 and Max_Data = 0x7FF. */ - - uint32_t PixelFormat; /*!< Specifies the pixel format. - This parameter can be one of value of @ref LTDC_Pixelformat */ - - uint32_t Alpha; /*!< Specifies the constant alpha used for blending. - This parameter must be a number between - Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint32_t Alpha0; /*!< Configures the default alpha value. - This parameter must be a number between - Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint32_t BlendingFactor1; /*!< Select the blending factor 1. - This parameter can be one of value of @ref LTDC_BlendingFactor1 */ - - uint32_t BlendingFactor2; /*!< Select the blending factor 2. - This parameter can be one of value of @ref LTDC_BlendingFactor2 */ - - uint32_t FBStartAdress; /*!< Configures the color frame buffer address */ - - uint32_t ImageWidth; /*!< Configures the color frame buffer line length. - This parameter must be a number between - Min_Data = 0x0000 and Max_Data = 0x1FFF. */ - - uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer. - This parameter must be a number between - Min_Data = 0x000 and Max_Data = 0x7FF. */ - - LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */ -} LTDC_LayerCfgTypeDef; - -/** - * @brief HAL LTDC State structures definition - */ -typedef enum -{ - HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */ - HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */ - HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */ - HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */ - HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */ -} HAL_LTDC_StateTypeDef; - -/** - * @brief LTDC handle Structure definition - */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) -typedef struct __LTDC_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ -{ - LTDC_TypeDef *Instance; /*!< LTDC Register base address */ - - LTDC_InitTypeDef Init; /*!< LTDC parameters */ - - LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */ - - HAL_LockTypeDef Lock; /*!< LTDC Lock */ - - __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */ - - __IO uint32_t ErrorCode; /*!< LTDC Error code */ - -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - void (* LineEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Line Event Callback */ - void (* ReloadEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Reload Event Callback */ - void (* ErrorCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Error Callback */ - - void (* MspInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp Init callback */ - void (* MspDeInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp DeInit callback */ - -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - - -} LTDC_HandleTypeDef; - -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL LTDC Callback ID enumeration definition - */ -typedef enum -{ - HAL_LTDC_MSPINIT_CB_ID = 0x00U, /*!< LTDC MspInit callback ID */ - HAL_LTDC_MSPDEINIT_CB_ID = 0x01U, /*!< LTDC MspDeInit callback ID */ - - HAL_LTDC_LINE_EVENT_CB_ID = 0x02U, /*!< LTDC Line Event Callback ID */ - HAL_LTDC_RELOAD_EVENT_CB_ID = 0x03U, /*!< LTDC Reload Callback ID */ - HAL_LTDC_ERROR_CB_ID = 0x04U /*!< LTDC Error Callback ID */ - -} HAL_LTDC_CallbackIDTypeDef; - -/** - * @brief HAL LTDC Callback pointer definition - */ -typedef void (*pLTDC_CallbackTypeDef)(LTDC_HandleTypeDef *hltdc); /*!< pointer to an LTDC callback function */ - -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup LTDC_Exported_Constants LTDC Exported Constants - * @{ - */ - -/** @defgroup LTDC_Error_Code LTDC Error Code - * @{ - */ -#define HAL_LTDC_ERROR_NONE 0x00000000U /*!< LTDC No error */ -#define HAL_LTDC_ERROR_TE 0x00000001U /*!< LTDC Transfer error */ -#define HAL_LTDC_ERROR_FU 0x00000002U /*!< LTDC FIFO Underrun */ -#define HAL_LTDC_ERROR_TIMEOUT 0x00000020U /*!< LTDC Timeout error */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) -#define HAL_LTDC_ERROR_INVALID_CALLBACK 0x00000040U /*!< LTDC Invalid Callback error */ -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup LTDC_Layer LTDC Layer - * @{ - */ -#define LTDC_LAYER_1 0x00000000U /*!< LTDC Layer 1 */ -#define LTDC_LAYER_2 0x00000001U /*!< LTDC Layer 2 */ -/** - * @} - */ - -/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY - * @{ - */ -#define LTDC_HSPOLARITY_AL 0x00000000U /*!< Horizontal Synchronization is active low. */ -#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */ -/** - * @} - */ - -/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY - * @{ - */ -#define LTDC_VSPOLARITY_AL 0x00000000U /*!< Vertical Synchronization is active low. */ -#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */ -/** - * @} - */ - -/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY - * @{ - */ -#define LTDC_DEPOLARITY_AL 0x00000000U /*!< Data Enable, is active low. */ -#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */ -/** - * @} - */ - -/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY - * @{ - */ -#define LTDC_PCPOLARITY_IPC 0x00000000U /*!< input pixel clock. */ -#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */ -/** - * @} - */ - -/** @defgroup LTDC_SYNC LTDC SYNC - * @{ - */ -#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */ -#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */ -/** - * @} - */ - -/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR - * @{ - */ -#define LTDC_COLOR 0x000000FFU /*!< Color mask */ -/** - * @} - */ - -/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1 - * @{ - */ -#define LTDC_BLENDING_FACTOR1_CA 0x00000400U /*!< Blending factor : Cte Alpha */ -#define LTDC_BLENDING_FACTOR1_PAxCA 0x00000600U /*!< Blending factor : Cte Alpha x Pixel Alpha*/ -/** - * @} - */ - -/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2 - * @{ - */ -#define LTDC_BLENDING_FACTOR2_CA 0x00000005U /*!< Blending factor : Cte Alpha */ -#define LTDC_BLENDING_FACTOR2_PAxCA 0x00000007U /*!< Blending factor : Cte Alpha x Pixel Alpha*/ -/** - * @} - */ - -/** @defgroup LTDC_Pixelformat LTDC Pixel format - * @{ - */ -#define LTDC_PIXEL_FORMAT_ARGB8888 0x00000000U /*!< ARGB8888 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_RGB888 0x00000001U /*!< RGB888 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_RGB565 0x00000002U /*!< RGB565 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_ARGB1555 0x00000003U /*!< ARGB1555 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_ARGB4444 0x00000004U /*!< ARGB4444 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_L8 0x00000005U /*!< L8 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_AL44 0x00000006U /*!< AL44 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_AL88 0x00000007U /*!< AL88 LTDC pixel format */ -/** - * @} - */ - -/** @defgroup LTDC_Alpha LTDC Alpha - * @{ - */ -#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Constant Alpha mask */ -/** - * @} - */ - -/** @defgroup LTDC_LAYER_Config LTDC LAYER Config - * @{ - */ -#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */ -#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */ - -#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */ -#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */ -/** - * @} - */ - -/** @defgroup LTDC_Interrupts LTDC Interrupts - * @{ - */ -#define LTDC_IT_LI LTDC_IER_LIE /*!< LTDC Line Interrupt */ -#define LTDC_IT_FU LTDC_IER_FUIE /*!< LTDC FIFO Underrun Interrupt */ -#define LTDC_IT_TE LTDC_IER_TERRIE /*!< LTDC Transfer Error Interrupt */ -#define LTDC_IT_RR LTDC_IER_RRIE /*!< LTDC Register Reload Interrupt */ -/** - * @} - */ - -/** @defgroup LTDC_Flags LTDC Flags - * @{ - */ -#define LTDC_FLAG_LI LTDC_ISR_LIF /*!< LTDC Line Interrupt Flag */ -#define LTDC_FLAG_FU LTDC_ISR_FUIF /*!< LTDC FIFO Underrun interrupt Flag */ -#define LTDC_FLAG_TE LTDC_ISR_TERRIF /*!< LTDC Transfer Error interrupt Flag */ -#define LTDC_FLAG_RR LTDC_ISR_RRIF /*!< LTDC Register Reload interrupt Flag */ -/** - * @} - */ - -/** @defgroup LTDC_Reload_Type LTDC Reload Type - * @{ - */ -#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */ -#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup LTDC_Exported_Macros LTDC Exported Macros - * @{ - */ - -/** @brief Reset LTDC handle state. - * @param __HANDLE__ LTDC handle - * @retval None - */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) -#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_LTDC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET) -#endif /*USE_HAL_LTDC_REGISTER_CALLBACKS */ - -/** - * @brief Enable the LTDC. - * @param __HANDLE__ LTDC handle - * @retval None. - */ -#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN) - -/** - * @brief Disable the LTDC. - * @param __HANDLE__ LTDC handle - * @retval None. - */ -#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN)) - -/** - * @brief Enable the LTDC Layer. - * @param __HANDLE__ LTDC handle - * @param __LAYER__ Specify the layer to be enabled. - * This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). - * @retval None. - */ -#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\ - |= (uint32_t)LTDC_LxCR_LEN) - -/** - * @brief Disable the LTDC Layer. - * @param __HANDLE__ LTDC handle - * @param __LAYER__ Specify the layer to be disabled. - * This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). - * @retval None. - */ -#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\ - &= ~(uint32_t)LTDC_LxCR_LEN) - -/** - * @brief Reload immediately all LTDC Layers. - * @param __HANDLE__ LTDC handle - * @retval None. - */ -#define __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR) - -/** - * @brief Reload during vertical blanking period all LTDC Layers. - * @param __HANDLE__ LTDC handle - * @retval None. - */ -#define __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_VBR) - -/* Interrupt & Flag management */ -/** - * @brief Get the LTDC pending flags. - * @param __HANDLE__ LTDC handle - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg LTDC_FLAG_LI: Line Interrupt flag - * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag - * @arg LTDC_FLAG_TE: Transfer Error interrupt flag - * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** - * @brief Clears the LTDC pending flags. - * @param __HANDLE__ LTDC handle - * @param __FLAG__ Specify the flag to clear. - * This parameter can be any combination of the following values: - * @arg LTDC_FLAG_LI: Line Interrupt flag - * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag - * @arg LTDC_FLAG_TE: Transfer Error interrupt flag - * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag - * @retval None - */ -#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** - * @brief Enables the specified LTDC interrupts. - * @param __HANDLE__ LTDC handle - * @param __INTERRUPT__ Specify the LTDC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg LTDC_IT_LI: Line Interrupt flag - * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag - * @arg LTDC_IT_TE: Transfer Error interrupt flag - * @arg LTDC_IT_RR: Register Reload Interrupt Flag - * @retval None - */ -#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** - * @brief Disables the specified LTDC interrupts. - * @param __HANDLE__ LTDC handle - * @param __INTERRUPT__ Specify the LTDC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg LTDC_IT_LI: Line Interrupt flag - * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag - * @arg LTDC_IT_TE: Transfer Error interrupt flag - * @arg LTDC_IT_RR: Register Reload Interrupt Flag - * @retval None - */ -#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified LTDC interrupt has occurred or not. - * @param __HANDLE__ LTDC handle - * @param __INTERRUPT__ Specify the LTDC interrupt source to check. - * This parameter can be one of the following values: - * @arg LTDC_IT_LI: Line Interrupt flag - * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag - * @arg LTDC_IT_TE: Transfer Error interrupt flag - * @arg LTDC_IT_RR: Register Reload Interrupt Flag - * @retval The state of INTERRUPT (SET or RESET). - */ -#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) -/** - * @} - */ - -/* Include LTDC HAL Extension module */ -#include "stm32f4xx_hal_ltdc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup LTDC_Exported_Functions - * @{ - */ -/** @addtogroup LTDC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc); -HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, - pLTDC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup LTDC_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc); -/** - * @} - */ - -/** @addtogroup LTDC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line); -HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc); -HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc); -HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType); -HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, - uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, - uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, - uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); - -/** - * @} - */ - -/** @addtogroup LTDC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc); -uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup LTDC_Private_Macros LTDC Private Macros - * @{ - */ -#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(\ - ((uint32_t)((__HANDLE__)->Instance))\ - + 0x84U + (0x80U*(__LAYER__))))) -#define IS_LTDC_LAYER(__LAYER__) ((__LAYER__) < MAX_LAYER) -#define IS_LTDC_HSPOL(__HSPOL__) (((__HSPOL__) == LTDC_HSPOLARITY_AL)\ - || ((__HSPOL__) == LTDC_HSPOLARITY_AH)) -#define IS_LTDC_VSPOL(__VSPOL__) (((__VSPOL__) == LTDC_VSPOLARITY_AL)\ - || ((__VSPOL__) == LTDC_VSPOLARITY_AH)) -#define IS_LTDC_DEPOL(__DEPOL__) (((__DEPOL__) == LTDC_DEPOLARITY_AL)\ - || ((__DEPOL__) == LTDC_DEPOLARITY_AH)) -#define IS_LTDC_PCPOL(__PCPOL__) (((__PCPOL__) == LTDC_PCPOLARITY_IPC)\ - || ((__PCPOL__) == LTDC_PCPOLARITY_IIPC)) -#define IS_LTDC_HSYNC(__HSYNC__) ((__HSYNC__) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_VSYNC(__VSYNC__) ((__VSYNC__) <= LTDC_VERTICALSYNC) -#define IS_LTDC_AHBP(__AHBP__) ((__AHBP__) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_AVBP(__AVBP__) ((__AVBP__) <= LTDC_VERTICALSYNC) -#define IS_LTDC_AAW(__AAW__) ((__AAW__) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_AAH(__AAH__) ((__AAH__) <= LTDC_VERTICALSYNC) -#define IS_LTDC_TOTALW(__TOTALW__) ((__TOTALW__) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_TOTALH(__TOTALH__) ((__TOTALH__) <= LTDC_VERTICALSYNC) -#define IS_LTDC_BLUEVALUE(__BBLUE__) ((__BBLUE__) <= LTDC_COLOR) -#define IS_LTDC_GREENVALUE(__BGREEN__) ((__BGREEN__) <= LTDC_COLOR) -#define IS_LTDC_REDVALUE(__BRED__) ((__BRED__) <= LTDC_COLOR) -#define IS_LTDC_BLENDING_FACTOR1(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_CA) || \ - ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_PAxCA)) -#define IS_LTDC_BLENDING_FACTOR2(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_CA) || \ - ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_PAxCA)) -#define IS_LTDC_PIXEL_FORMAT(__PIXEL_FORMAT__) (((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB8888) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB888) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB565) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB1555) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB4444) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_L8) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL44) || \ - ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL88)) -#define IS_LTDC_ALPHA(__ALPHA__) ((__ALPHA__) <= LTDC_ALPHA) -#define IS_LTDC_HCONFIGST(__HCONFIGST__) ((__HCONFIGST__) <= LTDC_STARTPOSITION) -#define IS_LTDC_HCONFIGSP(__HCONFIGSP__) ((__HCONFIGSP__) <= LTDC_STOPPOSITION) -#define IS_LTDC_VCONFIGST(__VCONFIGST__) ((__VCONFIGST__) <= LTDC_STARTPOSITION) -#define IS_LTDC_VCONFIGSP(__VCONFIGSP__) ((__VCONFIGSP__) <= LTDC_STOPPOSITION) -#define IS_LTDC_CFBP(__CFBP__) ((__CFBP__) <= LTDC_COLOR_FRAME_BUFFER) -#define IS_LTDC_CFBLL(__CFBLL__) ((__CFBLL__) <= LTDC_COLOR_FRAME_BUFFER) -#define IS_LTDC_CFBLNBR(__CFBLNBR__) ((__CFBLNBR__) <= LTDC_LINE_NUMBER) -#define IS_LTDC_LIPOS(__LIPOS__) ((__LIPOS__) <= 0x7FFU) -#define IS_LTDC_RELOAD(__RELOADTYPE__) (((__RELOADTYPE__) == LTDC_RELOAD_IMMEDIATE) || \ - ((__RELOADTYPE__) == LTDC_RELOAD_VERTICAL_BLANKING)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup LTDC_Private_Functions LTDC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* LTDC */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_LTDC_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc_ex.h deleted file mode 100644 index b9c39e4..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc_ex.h +++ /dev/null @@ -1,83 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_ltdc_ex.h - * @author MCD Application Team - * @brief Header file of LTDC HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_LTDC_EX_H -#define STM32F4xx_HAL_LTDC_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (LTDC) && defined (DSI) - -#include "stm32f4xx_hal_dsi.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup LTDCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup LTDCEx_Exported_Functions - * @{ - */ - -/** @addtogroup LTDCEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg); -HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* LTDC && DSI */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_LTDC_EX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h deleted file mode 100644 index 92488b2..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h +++ /dev/null @@ -1,459 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd.h - * @author MCD Application Team - * @brief Header file of PCD HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_PCD_H -#define STM32F4xx_HAL_PCD_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usb.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup PCD_Exported_Types PCD Exported Types - * @{ - */ - -/** - * @brief PCD State structure definition - */ -typedef enum -{ - HAL_PCD_STATE_RESET = 0x00, - HAL_PCD_STATE_READY = 0x01, - HAL_PCD_STATE_ERROR = 0x02, - HAL_PCD_STATE_BUSY = 0x03, - HAL_PCD_STATE_TIMEOUT = 0x04 -} PCD_StateTypeDef; - -/* Device LPM suspend state */ -typedef enum -{ - LPM_L0 = 0x00, /* on */ - LPM_L1 = 0x01, /* LPM L1 sleep */ - LPM_L2 = 0x02, /* suspend */ - LPM_L3 = 0x03, /* off */ -} PCD_LPM_StateTypeDef; - -typedef enum -{ - PCD_LPM_L0_ACTIVE = 0x00, /* on */ - PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ -} PCD_LPM_MsgTypeDef; - -typedef enum -{ - PCD_BCD_ERROR = 0xFF, - PCD_BCD_CONTACT_DETECTION = 0xFE, - PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, - PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, - PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, - PCD_BCD_DISCOVERY_COMPLETED = 0x00, - -} PCD_BCD_MsgTypeDef; - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -typedef USB_OTG_GlobalTypeDef PCD_TypeDef; -typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; -typedef USB_OTG_EPTypeDef PCD_EPTypeDef; -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/** - * @brief PCD Handle Structure definition - */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -typedef struct __PCD_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -{ - PCD_TypeDef *Instance; /*!< Register base address */ - PCD_InitTypeDef Init; /*!< PCD required parameters */ - __IO uint8_t USB_Address; /*!< USB Address */ - PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ - PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ - HAL_LockTypeDef Lock; /*!< PCD peripheral status */ - __IO PCD_StateTypeDef State; /*!< PCD communication state */ - __IO uint32_t ErrorCode; /*!< PCD Error code */ - uint32_t Setup[12]; /*!< Setup packet buffer */ - PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ - uint32_t BESL; - uint32_t FrameNumber; /*!< Store Current Frame number */ - - - uint32_t lpm_active; /*!< Enable or disable the Link Power Management . - This parameter can be set to ENABLE or DISABLE */ - - uint32_t battery_charging_active; /*!< Enable or disable Battery charging. - This parameter can be set to ENABLE or DISABLE */ - void *pData; /*!< Pointer to upper stack Handler */ - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ - void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ - void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ - void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ - void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ - void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ - void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ - - void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ - void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ - void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ - void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ - void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ - void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ - - void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ - void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -} PCD_HandleTypeDef; - -/** - * @} - */ - -/* Include PCD HAL Extended module */ -#include "stm32f4xx_hal_pcd_ex.h" - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup PCD_Speed PCD Speed - * @{ - */ -#define PCD_SPEED_HIGH USBD_HS_SPEED -#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED -#define PCD_SPEED_FULL USBD_FS_SPEED -/** - * @} - */ - -/** @defgroup PCD_PHY_Module PCD PHY Module - * @{ - */ -#define PCD_PHY_ULPI 1U -#define PCD_PHY_EMBEDDED 2U -#define PCD_PHY_UTMI 3U -/** - * @} - */ - -/** @defgroup PCD_Error_Code_definition PCD Error Code definition - * @brief PCD Error Code definition - * @{ - */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PCD_Exported_Macros PCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) - -#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ - ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) - -#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) -#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) - -#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \ - *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) - -#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \ - *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK - -#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \ - ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE) - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ - do { \ - EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \ - } while(0U) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ - do { \ - EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ - } while(0U) -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition - * @brief HAL USB OTG PCD Callback ID enumeration definition - * @{ - */ -typedef enum -{ - HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ - HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ - HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ - HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ - HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ - HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ - HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ - - HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ - HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ - -} HAL_PCD_CallbackIDTypeDef; -/** - * @} - */ - -/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition - * @brief HAL USB OTG PCD Callback pointer definition - * @{ - */ - -typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ -typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ -typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ -typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ -typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ -typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ -typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ - -/** - * @} - */ - -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, - pPCD_CallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataOutStageCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataInStageCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoOutIncpltCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoInIncpltCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/* Non-Blocking mode: Interrupt */ -/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); -void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode); - -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PCD_Private_Constants PCD Private Constants - * @{ - */ -/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ -#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ -/** - * @} - */ - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#ifndef USB_OTG_DOEPINT_OTEPSPR -#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ -#endif /* defined USB_OTG_DOEPINT_OTEPSPR */ - -#ifndef USB_OTG_DOEPMSK_OTEPSPRM -#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ -#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */ - -#ifndef USB_OTG_DOEPINT_NAK -#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ -#endif /* defined USB_OTG_DOEPINT_NAK */ - -#ifndef USB_OTG_DOEPMSK_NAKM -#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ -#endif /* defined USB_OTG_DOEPMSK_NAKM */ - -#ifndef USB_OTG_DOEPINT_STPKTRX -#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ -#endif /* defined USB_OTG_DOEPINT_STPKTRX */ - -#ifndef USB_OTG_DOEPMSK_NYETM -#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ -#endif /* defined USB_OTG_DOEPMSK_NYETM */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_PCD_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h deleted file mode 100644 index 72ded2b..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h +++ /dev/null @@ -1,88 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd_ex.h - * @author MCD Application Team - * @brief Header file of PCD HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_PCD_EX_H -#define STM32F4xx_HAL_PCD_EX_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCDEx - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ -/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @{ - */ - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); -void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - - -#endif /* STM32F4xx_HAL_PCD_EX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h deleted file mode 100644 index 57fd4d9..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h +++ /dev/null @@ -1,340 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.h - * @author MCD Application Team - * @brief Header file of PWR HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_EX_H -#define __STM32F4xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode - * @{ - */ -#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS -#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) -/** - * @} - */ - -/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag - * @{ - */ -#define PWR_FLAG_ODRDY PWR_CSR_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */ -#else -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to - 180 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to - 168 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */ -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ -/** - * @} - */ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN2 0x00000080U -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define PWR_WAKEUP_PIN3 0x00000040U -#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \ - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ -#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0U) -#else -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macros to enable or disable the Over drive mode. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Over drive switching. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Under drive mode. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - */ -#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN) -#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN)) - -/** @brief Check PWR flag is set or not. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switching is ready - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the Under-Drive Ready flag. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 - * @{ - */ -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ - defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -void HAL_PWREx_EnableMainRegulatorLowVoltage(void); -void HAL_PWREx_DisableMainRegulatorLowVoltage(void); -void HAL_PWREx_EnableLowRegulatorLowVoltage(void); -void HAL_PWREx_DisableLowRegulatorLowVoltage(void); -#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\ - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWREx_Private_Constants PWREx Private Constants - * @{ - */ - -/** @defgroup PWREx_register_alias_address PWREx Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -/* --- CR Register ---*/ -/* Alias word address of FPDS bit */ -#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos -#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U)) - -/* Alias word address of ODEN bit */ -#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos -#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U)) - -/* Alias word address of ODSWEN bit */ -#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos -#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U)) - -/* Alias word address of MRLVDS bit */ -#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos -#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U)) - -/* Alias word address of LPLVDS bit */ -#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos -#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U)) - - /** - * @} - */ - -/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of BRE bit */ -#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos -#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U)) - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWREx_Private_Macros PWREx Private Macros - * @{ - */ - -/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) -#else -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -#if defined(STM32F446xx) -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2)) -#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \ - ((PIN) == PWR_WAKEUP_PIN3)) -#else -#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1) -#endif /* STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_EX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h deleted file mode 100644 index 56287af..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h +++ /dev/null @@ -1,750 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_qspi.h - * @author MCD Application Team - * @brief Header file of QSPI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_QSPI_H -#define STM32F4xx_HAL_QSPI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined(QUADSPI) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup QSPI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup QSPI_Exported_Types QSPI Exported Types - * @{ - */ - -/** - * @brief QSPI Init structure definition - */ -typedef struct -{ - uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock. - This parameter can be a number between 0 and 255 */ - uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode) - This parameter can be a value between 1 and 32 */ - uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to - take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode) - This parameter can be a value of @ref QSPI_SampleShifting */ - uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits - required to address the flash memory. The flash capacity can be up to 4GB - (addressed using 32 bits) in indirect mode, but the addressable space in - memory-mapped mode is limited to 256MB - This parameter can be a number between 0 and 31 */ - uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number - of clock cycles which the chip select must remain high between commands. - This parameter can be a value of @ref QSPI_ChipSelectHighTime */ - uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands. - This parameter can be a value of @ref QSPI_ClockMode */ - uint32_t FlashID; /* Specifies the Flash which will be used, - This parameter can be a value of @ref QSPI_Flash_Select */ - uint32_t DualFlash; /* Specifies the Dual Flash Mode State - This parameter can be a value of @ref QSPI_DualFlash_Mode */ -}QSPI_InitTypeDef; - -/** - * @brief HAL QSPI State structures definition - */ -typedef enum -{ - HAL_QSPI_STATE_RESET = 0x00U, /*!< Peripheral not initialized */ - HAL_QSPI_STATE_READY = 0x01U, /*!< Peripheral initialized and ready for use */ - HAL_QSPI_STATE_BUSY = 0x02U, /*!< Peripheral in indirect mode and busy */ - HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12U, /*!< Peripheral in indirect mode with transmission ongoing */ - HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22U, /*!< Peripheral in indirect mode with reception ongoing */ - HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42U, /*!< Peripheral in auto polling mode ongoing */ - HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82U, /*!< Peripheral in memory mapped mode ongoing */ - HAL_QSPI_STATE_ABORT = 0x08U, /*!< Peripheral with abort request ongoing */ - HAL_QSPI_STATE_ERROR = 0x04U /*!< Peripheral in error */ -}HAL_QSPI_StateTypeDef; - -/** - * @brief QSPI Handle Structure definition - */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) -typedef struct __QSPI_HandleTypeDef -#else -typedef struct -#endif -{ - QUADSPI_TypeDef *Instance; /* QSPI registers base address */ - QSPI_InitTypeDef Init; /* QSPI communication parameters */ - uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */ - __IO uint32_t TxXferSize; /* QSPI Tx Transfer size */ - __IO uint32_t TxXferCount; /* QSPI Tx Transfer Counter */ - uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */ - __IO uint32_t RxXferSize; /* QSPI Rx Transfer size */ - __IO uint32_t RxXferCount; /* QSPI Rx Transfer Counter */ - DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */ - __IO HAL_LockTypeDef Lock; /* Locking object */ - __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */ - __IO uint32_t ErrorCode; /* QSPI Error code */ - uint32_t Timeout; /* Timeout for the QSPI memory access */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - void (* ErrorCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* AbortCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* FifoThresholdCallback)(struct __QSPI_HandleTypeDef *hqspi); - void (* CmdCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* RxCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* TxCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* RxHalfCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* TxHalfCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* StatusMatchCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* TimeOutCallback) (struct __QSPI_HandleTypeDef *hqspi); - - void (* MspInitCallback) (struct __QSPI_HandleTypeDef *hqspi); - void (* MspDeInitCallback) (struct __QSPI_HandleTypeDef *hqspi); -#endif -}QSPI_HandleTypeDef; - -/** - * @brief QSPI Command structure definition - */ -typedef struct -{ - uint32_t Instruction; /* Specifies the Instruction to be sent - This parameter can be a value (8-bit) between 0x00 and 0xFF */ - uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize) - This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */ - uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize) - This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */ - uint32_t AddressSize; /* Specifies the Address Size - This parameter can be a value of @ref QSPI_AddressSize */ - uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size - This parameter can be a value of @ref QSPI_AlternateBytesSize */ - uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles. - This parameter can be a number between 0 and 31 */ - uint32_t InstructionMode; /* Specifies the Instruction Mode - This parameter can be a value of @ref QSPI_InstructionMode */ - uint32_t AddressMode; /* Specifies the Address Mode - This parameter can be a value of @ref QSPI_AddressMode */ - uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode - This parameter can be a value of @ref QSPI_AlternateBytesMode */ - uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases) - This parameter can be a value of @ref QSPI_DataMode */ - uint32_t NbData; /* Specifies the number of data to transfer. (This is the number of bytes) - This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length - until end of memory)*/ - uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase - This parameter can be a value of @ref QSPI_DdrMode */ - uint32_t DdrHoldHalfCycle; /* Specifies if the DDR hold is enabled. When enabled it delays the data - output by one half of system clock in DDR mode. - This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */ - uint32_t SIOOMode; /* Specifies the send instruction only once mode - This parameter can be a value of @ref QSPI_SIOOMode */ -}QSPI_CommandTypeDef; - -/** - * @brief QSPI Auto Polling mode configuration structure definition - */ -typedef struct -{ - uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match. - This parameter can be any value between 0 and 0xFFFFFFFF */ - uint32_t Mask; /* Specifies the mask to be applied to the status bytes received. - This parameter can be any value between 0 and 0xFFFFFFFF */ - uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases. - This parameter can be any value between 0 and 0xFFFF */ - uint32_t StatusBytesSize; /* Specifies the size of the status bytes received. - This parameter can be any value between 1 and 4 */ - uint32_t MatchMode; /* Specifies the method used for determining a match. - This parameter can be a value of @ref QSPI_MatchMode */ - uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match. - This parameter can be a value of @ref QSPI_AutomaticStop */ -}QSPI_AutoPollingTypeDef; - -/** - * @brief QSPI Memory Mapped mode configuration structure definition - */ -typedef struct -{ - uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select. - This parameter can be any value between 0 and 0xFFFF */ - uint32_t TimeOutActivation; /* Specifies if the timeout counter is enabled to release the chip select. - This parameter can be a value of @ref QSPI_TimeOutActivation */ -}QSPI_MemoryMappedTypeDef; - -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) -/** - * @brief HAL QSPI Callback ID enumeration definition - */ -typedef enum -{ - HAL_QSPI_ERROR_CB_ID = 0x00U, /*!< QSPI Error Callback ID */ - HAL_QSPI_ABORT_CB_ID = 0x01U, /*!< QSPI Abort Callback ID */ - HAL_QSPI_FIFO_THRESHOLD_CB_ID = 0x02U, /*!< QSPI FIFO Threshold Callback ID */ - HAL_QSPI_CMD_CPLT_CB_ID = 0x03U, /*!< QSPI Command Complete Callback ID */ - HAL_QSPI_RX_CPLT_CB_ID = 0x04U, /*!< QSPI Rx Complete Callback ID */ - HAL_QSPI_TX_CPLT_CB_ID = 0x05U, /*!< QSPI Tx Complete Callback ID */ - HAL_QSPI_RX_HALF_CPLT_CB_ID = 0x06U, /*!< QSPI Rx Half Complete Callback ID */ - HAL_QSPI_TX_HALF_CPLT_CB_ID = 0x07U, /*!< QSPI Tx Half Complete Callback ID */ - HAL_QSPI_STATUS_MATCH_CB_ID = 0x08U, /*!< QSPI Status Match Callback ID */ - HAL_QSPI_TIMEOUT_CB_ID = 0x09U, /*!< QSPI Timeout Callback ID */ - - HAL_QSPI_MSP_INIT_CB_ID = 0x0AU, /*!< QSPI MspInit Callback ID */ - HAL_QSPI_MSP_DEINIT_CB_ID = 0x0B0 /*!< QSPI MspDeInit Callback ID */ -}HAL_QSPI_CallbackIDTypeDef; - -/** - * @brief HAL QSPI Callback pointer definition - */ -typedef void (*pQSPI_CallbackTypeDef)(QSPI_HandleTypeDef *hqspi); -#endif -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup QSPI_Exported_Constants QSPI Exported Constants - * @{ - */ - -/** @defgroup QSPI_ErrorCode QSPI Error Code - * @{ - */ -#define HAL_QSPI_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_QSPI_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */ -#define HAL_QSPI_ERROR_TRANSFER 0x00000002U /*!< Transfer error */ -#define HAL_QSPI_ERROR_DMA 0x00000004U /*!< DMA transfer error */ -#define HAL_QSPI_ERROR_INVALID_PARAM 0x00000008U /*!< Invalid parameters error */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) -#define HAL_QSPI_ERROR_INVALID_CALLBACK 0x00000010U /*!< Invalid callback error */ -#endif -/** - * @} - */ - -/** @defgroup QSPI_SampleShifting QSPI Sample Shifting - * @{ - */ -#define QSPI_SAMPLE_SHIFTING_NONE 0x00000000U /*!State = HAL_QSPI_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET) -#endif - -/** @brief Enable the QSPI peripheral. - * @param __HANDLE__ specifies the QSPI Handle. - * @retval None - */ -#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN) - -/** @brief Disable the QSPI peripheral. - * @param __HANDLE__ specifies the QSPI Handle. - * @retval None - */ -#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN) - -/** @brief Enable the specified QSPI interrupt. - * @param __HANDLE__ specifies the QSPI Handle. - * @param __INTERRUPT__ specifies the QSPI interrupt source to enable. - * This parameter can be one of the following values: - * @arg QSPI_IT_TO: QSPI Timeout interrupt - * @arg QSPI_IT_SM: QSPI Status match interrupt - * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt - * @arg QSPI_IT_TC: QSPI Transfer complete interrupt - * @arg QSPI_IT_TE: QSPI Transfer error interrupt - * @retval None - */ -#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) - - -/** @brief Disable the specified QSPI interrupt. - * @param __HANDLE__ specifies the QSPI Handle. - * @param __INTERRUPT__ specifies the QSPI interrupt source to disable. - * This parameter can be one of the following values: - * @arg QSPI_IT_TO: QSPI Timeout interrupt - * @arg QSPI_IT_SM: QSPI Status match interrupt - * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt - * @arg QSPI_IT_TC: QSPI Transfer complete interrupt - * @arg QSPI_IT_TE: QSPI Transfer error interrupt - * @retval None - */ -#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) - -/** @brief Check whether the specified QSPI interrupt source is enabled or not. - * @param __HANDLE__ specifies the QSPI Handle. - * @param __INTERRUPT__ specifies the QSPI interrupt source to check. - * This parameter can be one of the following values: - * @arg QSPI_IT_TO: QSPI Timeout interrupt - * @arg QSPI_IT_SM: QSPI Status match interrupt - * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt - * @arg QSPI_IT_TC: QSPI Transfer complete interrupt - * @arg QSPI_IT_TE: QSPI Transfer error interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Check whether the selected QSPI flag is set or not. - * @param __HANDLE__ specifies the QSPI Handle. - * @param __FLAG__ specifies the QSPI flag to check. - * This parameter can be one of the following values: - * @arg QSPI_FLAG_BUSY: QSPI Busy flag - * @arg QSPI_FLAG_TO: QSPI Timeout flag - * @arg QSPI_FLAG_SM: QSPI Status match flag - * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag - * @arg QSPI_FLAG_TC: QSPI Transfer complete flag - * @arg QSPI_FLAG_TE: QSPI Transfer error flag - * @retval None - */ -#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0U) ? SET : RESET) - -/** @brief Clears the specified QSPI's flag status. - * @param __HANDLE__ specifies the QSPI Handle. - * @param __FLAG__ specifies the QSPI clear register flag that needs to be set - * This parameter can be one of the following values: - * @arg QSPI_FLAG_TO: QSPI Timeout flag - * @arg QSPI_FLAG_SM: QSPI Status match flag - * @arg QSPI_FLAG_TC: QSPI Transfer complete flag - * @arg QSPI_FLAG_TE: QSPI Transfer error flag - * @retval None - */ -#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__)) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup QSPI_Exported_Functions - * @{ - */ - -/** @addtogroup QSPI_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi); -HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi); -/** - * @} - */ - -/** @addtogroup QSPI_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -/* QSPI IRQ handler method */ -void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi); - -/* QSPI indirect mode */ -HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd); -HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData); -HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData); -HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData); -HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData); - -/* QSPI status flag polling mode */ -HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg); - -/* QSPI memory-mapped mode */ -HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg); - -/* Callback functions in non-blocking modes ***********************************/ -void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_AbortCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi); - -/* QSPI indirect mode */ -void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi); - -/* QSPI status flag polling mode */ -void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi); - -/* QSPI memory-mapped mode */ -void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi); - -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) -/* QSPI callback registering/unregistering */ -HAL_StatusTypeDef HAL_QSPI_RegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId, pQSPI_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_QSPI_UnRegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId); -#endif -/** - * @} - */ - -/** @addtogroup QSPI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control and State functions ************************************/ -HAL_QSPI_StateTypeDef HAL_QSPI_GetState (QSPI_HandleTypeDef *hqspi); -uint32_t HAL_QSPI_GetError (QSPI_HandleTypeDef *hqspi); -HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi); -HAL_StatusTypeDef HAL_QSPI_Abort_IT (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_SetTimeout (QSPI_HandleTypeDef *hqspi, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold); -uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi); -HAL_StatusTypeDef HAL_QSPI_SetFlashID (QSPI_HandleTypeDef *hqspi, uint32_t FlashID); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup QSPI_Private_Macros QSPI Private Macros - * @{ - */ -#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFU) - -#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0U) && ((THR) <= 32U)) - -#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \ - ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE)) - -#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31U)) - -#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE)) - -#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \ - ((CLKMODE) == QSPI_CLOCK_MODE_3)) - -#define IS_QSPI_FLASH_ID(FLASH_ID) (((FLASH_ID) == QSPI_FLASH_ID_1) || \ - ((FLASH_ID) == QSPI_FLASH_ID_2)) - -#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \ - ((MODE) == QSPI_DUALFLASH_DISABLE)) - -#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFFU) - -#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \ - ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \ - ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \ - ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS)) - -#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \ - ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \ - ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \ - ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS)) - -#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31U) - -#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \ - ((MODE) == QSPI_INSTRUCTION_1_LINE) || \ - ((MODE) == QSPI_INSTRUCTION_2_LINES) || \ - ((MODE) == QSPI_INSTRUCTION_4_LINES)) - -#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \ - ((MODE) == QSPI_ADDRESS_1_LINE) || \ - ((MODE) == QSPI_ADDRESS_2_LINES) || \ - ((MODE) == QSPI_ADDRESS_4_LINES)) - -#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \ - ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \ - ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \ - ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES)) - -#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \ - ((MODE) == QSPI_DATA_1_LINE) || \ - ((MODE) == QSPI_DATA_2_LINES) || \ - ((MODE) == QSPI_DATA_4_LINES)) - -#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \ - ((DDR_MODE) == QSPI_DDR_MODE_ENABLE)) - -#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \ - ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY)) - -#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \ - ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD)) - -#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL) - -#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U)) - -#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \ - ((MODE) == QSPI_MATCH_MODE_OR)) - -#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \ - ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE)) - -#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \ - ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE)) - -#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU) -/** -* @} -*/ -/* End of private macros -----------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(QUADSPI) */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_QSPI_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h deleted file mode 100644 index b58e80a..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h +++ /dev/null @@ -1,1459 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.h - * @author MCD Application Team - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_H -#define __STM32F4xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include RCC HAL Extended module */ -/* (include on top of file since RCC structures are defined in extended file) */ -#include "stm32f4xx_hal_rcc_ex.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ -}RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - -}RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE 0x00000000U -#define RCC_OSCILLATORTYPE_HSE 0x00000001U -#define RCC_OSCILLATORTYPE_HSI 0x00000002U -#define RCC_OSCILLATORTYPE_LSE 0x00000004U -#define RCC_OSCILLATORTYPE_LSI 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF 0x00000000U -#define RCC_HSE_ON RCC_CR_HSEON -#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF 0x00000000U -#define RCC_LSE_ON RCC_BDCR_LSEON -#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF ((uint8_t)0x00) -#define RCC_HSI_ON ((uint8_t)0x01) - -#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */ -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF ((uint8_t)0x00) -#define RCC_LSI_ON ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE ((uint8_t)0x00) -#define RCC_PLL_OFF ((uint8_t)0x01) -#define RCC_PLL_ON ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider - * @{ - */ -#define RCC_PLLP_DIV2 0x00000002U -#define RCC_PLLP_DIV4 0x00000004U -#define RCC_PLLP_DIV6 0x00000006U -#define RCC_PLLP_DIV8 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ -#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI -#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK 0x00000001U -#define RCC_CLOCKTYPE_HCLK 0x00000002U -#define RCC_CLOCKTYPE_PCLK1 0x00000004U -#define RCC_CLOCKTYPE_PCLK2 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @note The RCC_SYSCLKSOURCE_PLLRCLK parameter is available only for - * STM32F446xx devices. - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL -#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @note The RCC_SYSCLKSOURCE_STATUS_PLLRCLK parameter is available only for - * STM32F446xx devices. - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */ -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NO_CLK 0x00000000U -#define RCC_RTCCLKSOURCE_LSE 0x00000100U -#define RCC_RTCCLKSOURCE_LSI 0x00000200U -#define RCC_RTCCLKSOURCE_HSE_DIVX 0x00000300U -#define RCC_RTCCLKSOURCE_HSE_DIV2 0x00020300U -#define RCC_RTCCLKSOURCE_HSE_DIV3 0x00030300U -#define RCC_RTCCLKSOURCE_HSE_DIV4 0x00040300U -#define RCC_RTCCLKSOURCE_HSE_DIV5 0x00050300U -#define RCC_RTCCLKSOURCE_HSE_DIV6 0x00060300U -#define RCC_RTCCLKSOURCE_HSE_DIV7 0x00070300U -#define RCC_RTCCLKSOURCE_HSE_DIV8 0x00080300U -#define RCC_RTCCLKSOURCE_HSE_DIV9 0x00090300U -#define RCC_RTCCLKSOURCE_HSE_DIV10 0x000A0300U -#define RCC_RTCCLKSOURCE_HSE_DIV11 0x000B0300U -#define RCC_RTCCLKSOURCE_HSE_DIV12 0x000C0300U -#define RCC_RTCCLKSOURCE_HSE_DIV13 0x000D0300U -#define RCC_RTCCLKSOURCE_HSE_DIV14 0x000E0300U -#define RCC_RTCCLKSOURCE_HSE_DIV15 0x000F0300U -#define RCC_RTCCLKSOURCE_HSE_DIV16 0x00100300U -#define RCC_RTCCLKSOURCE_HSE_DIV17 0x00110300U -#define RCC_RTCCLKSOURCE_HSE_DIV18 0x00120300U -#define RCC_RTCCLKSOURCE_HSE_DIV19 0x00130300U -#define RCC_RTCCLKSOURCE_HSE_DIV20 0x00140300U -#define RCC_RTCCLKSOURCE_HSE_DIV21 0x00150300U -#define RCC_RTCCLKSOURCE_HSE_DIV22 0x00160300U -#define RCC_RTCCLKSOURCE_HSE_DIV23 0x00170300U -#define RCC_RTCCLKSOURCE_HSE_DIV24 0x00180300U -#define RCC_RTCCLKSOURCE_HSE_DIV25 0x00190300U -#define RCC_RTCCLKSOURCE_HSE_DIV26 0x001A0300U -#define RCC_RTCCLKSOURCE_HSE_DIV27 0x001B0300U -#define RCC_RTCCLKSOURCE_HSE_DIV28 0x001C0300U -#define RCC_RTCCLKSOURCE_HSE_DIV29 0x001D0300U -#define RCC_RTCCLKSOURCE_HSE_DIV30 0x001E0300U -#define RCC_RTCCLKSOURCE_HSE_DIV31 0x001F0300U -/** - * @} - */ - -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 0x00000000U -#define RCC_MCO2 0x00000001U -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_HSI 0x00000000U -#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0 -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1 -#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1 -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 0x00000000U -#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2 -#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) -#define RCC_IT_CSS ((uint8_t)0x80) -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: 0XXYYYYYb - * - YYYYY : Flag position in the register - * - 0XX : Register index - * - 01: CR register - * - 10: BDCR register - * - 11: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)0x41) - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_BORRST ((uint8_t)0x79) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) -#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN)) -#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET) -#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET) -#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET) - -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET) -#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET) -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET) -#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) -#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) -#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) -#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) -#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) -#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) - -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) -#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) -#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) -#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) -#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) -#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) -#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) -#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) -#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) -#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) - -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) -#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) -#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) -#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) - -#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) - -#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) - -#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wake-up from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * This parameter can be: ENABLE or DISABLE. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) -#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param __HSICalibrationValue__ specifies the calibration trimming value. - * (default is RCC_HSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\ - RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_Pos)) -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) -#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro. - * User should request a transition to HSE Off first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg RCC_HSE_ON: turn ON the HSE oscillator. - * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do { \ - if ((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if ((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * User should request a transition to LSE Off first and then LSE On or LSE Bypass. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg RCC_LSE_ON: turn ON the LSE oscillator. - * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration - * @{ - */ - -/** @brief Macros to enable or disable the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) -#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) - -/** @brief Macros to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by - * a Power On Reset (POR). - * @param __RTCCLKSource__ specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK : No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE : LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI : LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wake-up source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - */ -#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) - -#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ - RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \ - } while(0U) - -/** @brief Macro to get the RTC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** - * @brief Get the RTC and HSE clock divider (RTCPRE). - * @retval Returned value can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL) - -/** @brief Macros to force or release the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) -#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macros to enable or disable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) -#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) - -/** @brief Macro to configure the PLL clock source. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * - */ -#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) - -/** @brief Macro to configure the PLL multiplication factor. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * - */ -#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ -/** - * @brief Macro to configure the system clock source. - * @param __RCC_SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source. This - * parameter is available only for STM32F446xx devices. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock. This parameter - * is available only for STM32F446xx devices. - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) - -/** @brief Macro to get the oscillator used as PLL clock source. - * @retval The oscillator used as PLL clock source. The returned value can be one - * of the following: - * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) -/** - * @} - */ - -/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config - * @{ - */ - -/** @brief Macro to configure the MCO1 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - */ -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) - -/** @brief Macro to configure the MCO2 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx - * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have - * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5). - */ -#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U))); -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) - -/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16] - * bits to clear the selected interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, - * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready. - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready. - * @arg RCC_FLAG_PLLRDY: Main PLL clock ready. - * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready. - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready. - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready. - * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset. - * @arg RCC_FLAG_PINRST: Pin reset. - * @arg RCC_FLAG_PORRST: POR/PDR reset. - * @arg RCC_FLAG_SFTRST: Software reset. - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset. - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset. - * @arg RCC_FLAG_LPWRRST: Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define RCC_FLAG_MASK ((uint8_t)0x1FU) -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - /** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); - -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ - -/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) - /* --- CR Register --- */ - /* Alias word address of HSION bit */ -#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U) -#define RCC_HSION_BIT_NUMBER 0x00U -#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U)) -/* Alias word address of CSSON bit */ -#define RCC_CSSON_BIT_NUMBER 0x13U -#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U)) -/* Alias word address of PLLON bit */ -#define RCC_PLLON_BIT_NUMBER 0x18U -#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U)) - -/* --- BDCR Register --- */ -/* Alias word address of RTCEN bit */ -#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U) -#define RCC_RTCEN_BIT_NUMBER 0x0FU -#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U)) -/* Alias word address of BDRST bit */ -#define RCC_BDRST_BIT_NUMBER 0x10U -#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U)) - -/* --- CSR Register --- */ -/* Alias word address of LSION bit */ -#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U) -#define RCC_LSION_BIT_NUMBER 0x00U -#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U)) - -/* CR register byte 3 (Bits[23:16]) base address */ -#define RCC_CR_BYTE2_ADDRESS 0x40023802U - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U)) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U)) - -/* BDCR register base address */ -#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET) - -#define RCC_DBP_TIMEOUT_VALUE 2U -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT - -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE 2U /* 2 ms */ -#define LSI_TIMEOUT_VALUE 2U /* 2 ms */ -#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_BYPASS)) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_BYPASS)) - -#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)) - -#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) - -#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON)) - -#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ - ((SOURCE) == RCC_PLLSOURCE_HSE)) - -#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK)) - -#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31)) - -#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U) - -#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U)) - -#define IS_RCC_PLLQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \ - ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \ - ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \ - ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \ - ((HCLK) == RCC_SYSCLK_DIV512)) - -#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U)) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \ - ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \ - ((PCLK) == RCC_HCLK_DIV16)) - -#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) - -#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ - ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)) - -#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ - ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ - ((DIV) == RCC_MCODIV_5)) -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h deleted file mode 100644 index 909a717..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h +++ /dev/null @@ -1,7111 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.h - * @author MCD Application Team - * @brief Header file of RCC HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_EX_H -#define __STM32F4xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 0 and Max_Data = 63 */ - - uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 - except for STM32F411xE devices where the Min_Data = 192 */ - - uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK). - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - - uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a number between Min_Data = 2 and Max_Data = 15 */ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx - and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. - This parameter must be a number between Min_Data = 2 and Max_Data = 7 */ -#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -}RCC_PLLInitTypeDef; - -#if defined(STM32F446xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock. - This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ - - uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection. - This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection. - This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F446xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ - -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t PLLDivR; /*!< Specifies the PLL division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLL is selected as Clock Source SAI */ - - uint32_t PLLI2SDivR; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -#endif /* STM32F413xx || STM32F423xx */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */ - - uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ - -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t Dfsdm2ClockSelection; /*!< Specifies DFSDM2 Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM2_Kernel_Clock_Source */ - - uint32_t Dfsdm2AudioClockSelection;/*!< Specifies DFSDM2 Audio Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM2_Audio_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t SaiAClockSelection; /*!< Specifies SAI1_A Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_BlockA_Clock_Source */ - - uint32_t SaiBClockSelection; /*!< Specifies SAI1_B Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_BlockB_Clock_Source */ -#endif /* STM32F413xx || STM32F423xx */ - - uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection. - This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ -#if defined(STM32F469xx) || defined(STM32F479xx) - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks. - This parameter is only available in STM32F469xx/STM32F479xx devices. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ -#endif /* STM32F469xx || STM32F479xx */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - - uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ - -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. - This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -#if defined(STM32F469xx) || defined(STM32F479xx) - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ -#endif /* STM32F469xx || STM32F479xx */ -}RCC_PeriphCLKInitTypeDef; - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ -#if defined(STM32F411xE) - uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 62 */ -#endif /* STM32F411xE */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 - Except for STM32F411xE devices where the Min_Data = 192. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - -}RCC_PLLI2SInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection - * @{ - */ -/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -#define RCC_PERIPHCLK_I2S_APB1 0x00000001U -#define RCC_PERIPHCLK_I2S_APB2 0x00000002U -#define RCC_PERIPHCLK_TIM 0x00000004U -#define RCC_PERIPHCLK_RTC 0x00000008U -#define RCC_PERIPHCLK_FMPI2C1 0x00000010U -#define RCC_PERIPHCLK_CLK48 0x00000020U -#define RCC_PERIPHCLK_SDIO 0x00000040U -#define RCC_PERIPHCLK_PLLI2S 0x00000080U -#define RCC_PERIPHCLK_DFSDM1 0x00000100U -#define RCC_PERIPHCLK_DFSDM1_AUDIO 0x00000200U -#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define RCC_PERIPHCLK_DFSDM2 0x00000400U -#define RCC_PERIPHCLK_DFSDM2_AUDIO 0x00000800U -#define RCC_PERIPHCLK_LPTIM1 0x00001000U -#define RCC_PERIPHCLK_SAIA 0x00002000U -#define RCC_PERIPHCLK_SAIB 0x00004000U -#endif /* STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- Peripheral Clock source for STM32F410xx ----------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_TIM 0x00000002U -#define RCC_PERIPHCLK_RTC 0x00000004U -#define RCC_PERIPHCLK_FMPI2C1 0x00000008U -#define RCC_PERIPHCLK_LPTIM1 0x00000010U -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- Peripheral Clock source for STM32F446xx ----------------*/ -#if defined(STM32F446xx) -#define RCC_PERIPHCLK_I2S_APB1 0x00000001U -#define RCC_PERIPHCLK_I2S_APB2 0x00000002U -#define RCC_PERIPHCLK_SAI1 0x00000004U -#define RCC_PERIPHCLK_SAI2 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_CEC 0x00000040U -#define RCC_PERIPHCLK_FMPI2C1 0x00000080U -#define RCC_PERIPHCLK_CLK48 0x00000100U -#define RCC_PERIPHCLK_SDIO 0x00000200U -#define RCC_PERIPHCLK_SPDIFRX 0x00000400U -#define RCC_PERIPHCLK_PLLI2S 0x00000800U -#endif /* STM32F446xx */ -/*-----------------------------------------------------------------------------*/ - -/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U -#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U -#define RCC_PERIPHCLK_LTDC 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_PLLI2S 0x00000040U -#define RCC_PERIPHCLK_CLK48 0x00000080U -#define RCC_PERIPHCLK_SDIO 0x00000100U -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U -#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U -#define RCC_PERIPHCLK_LTDC 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_PLLI2S 0x00000040U -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_RTC 0x00000002U -#define RCC_PERIPHCLK_PLLI2S 0x00000004U -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_TIM 0x00000008U -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -/*----------------------------------------------------------------------------*/ -/** - * @} - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \ - defined(STM32F479xx) -/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source - * @{ - */ -#define RCC_I2SCLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SCLKSOURCE_EXT 0x00000001U -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PLLSAIDIVR_2 0x00000000U -#define RCC_PLLSAIDIVR_4 0x00010000U -#define RCC_PLLSAIDIVR_8 0x00020000U -#define RCC_PLLSAIDIVR_16 0x00030000U -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider - * @{ - */ -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define RCC_PLLI2SP_DIV2 0x00000002U -#define RCC_PLLI2SP_DIV4 0x00000004U -#define RCC_PLLI2SP_DIV6 0x00000006U -#define RCC_PLLI2SP_DIV8 0x00000008U -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider - * @{ - */ -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PLLSAIP_DIV2 0x00000002U -#define RCC_PLLSAIP_DIV4 0x00000004U -#define RCC_PLLSAIP_DIV6 0x00000006U -#define RCC_PLLSAIP_DIV8 0x00000008U -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAIACLKSOURCE_PLLI2S 0x00100000U -#define RCC_SAIACLKSOURCE_EXT 0x00200000U -/** - * @} - */ - -/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAIBCLKSOURCE_PLLI2S 0x00400000U -#define RCC_SAIBCLKSOURCE_EXT 0x00800000U -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source - * @{ - */ -#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U -#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL) -/** - * @} - */ -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) -/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source - * @{ - */ -#define RCC_SAI1CLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0) -#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1) -#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source - * @{ - */ -#define RCC_SAI2CLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0) -#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1) -#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source - * @{ - */ -#define RCC_CECCLKSOURCE_HSI 0x00000000U -#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL) -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source - * @{ - */ -#define RCC_SPDIFRXCLKSOURCE_PLLR 0x00000000U -#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL) -/** - * @} - */ - -#endif /* STM32F446xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_SAI1_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLI2SR 0x00000000U -#define RCC_SAIACLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0) -#define RCC_SAIACLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1ASRC_1) -#define RCC_SAIACLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0 | RCC_DCKCFGR_SAI1ASRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_SAI1_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLI2SR 0x00000000U -#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0) -#define RCC_SAIBCLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1BSRC_1) -#define RCC_SAIBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0 | RCC_DCKCFGR_SAI1BSRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) -#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) -#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) -/** - * @} - */ - - -/** @defgroup RCCEx_DFSDM2_Audio_Clock_Source RCC DFSDM2 Audio Clock Source - * @{ - */ -#define RCC_DFSDM2AUDIOCLKSOURCE_I2S1 0x00000000U -#define RCC_DFSDM2AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM2ASEL) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM2_Kernel_Clock_Source RCC DFSDM2 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM2CLKSOURCE_PCLK2 0x00000000U -#define RCC_DFSDM2CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) -/** - * @} - */ - -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source - * @{ - */ -#define RCC_PLLI2SCLKSOURCE_PLLSRC 0x00000000U -#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source - * @{ - */ -#define RCC_DFSDM1AUDIOCLKSOURCE_I2S1 0x00000000U -#define RCC_DFSDM1AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U -#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) - -/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source - * @{ - */ -#define RCC_I2SAPBCLKSOURCE_PLLR 0x00000000U -#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0) -#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) -#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) -#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection - * @{ - */ -#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00) -#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection - * @{ - */ -#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00) -#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\ - STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK 0x00000000U -#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F413xx | STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK 0x00000000U -#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ -/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) -#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) -#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) - -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0U) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET) -#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET) -#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET) -#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET) -#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - #define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) - -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET) -#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET) -#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) -#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) -#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST)) -#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) - -#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN)) -#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0U) - -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0U) -#endif /* STM32F407xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -#endif /* STM32F407xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) - -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) - /** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F415xx || STM32F417xx */ - -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------- STM32F401xE/STM32F401xC --------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -/** - * @} - */ -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -/** - * @} - */ -#endif /* STM32F401xC || STM32F401xE*/ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F410xx -------------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) != RESET) - -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB1) peripheral clock. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) - -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() -#define __HAL_RCC_AHB2_RELEASE_RESET() -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() -#define __HAL_RCC_AHB3_RELEASE_RESET() -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) -/** - * @} - */ - -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F411xx -------------------------------*/ -#if defined(STM32F411xE) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -/** - * @} - */ -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F446xx -----------------------------*/ -#if defined(STM32F446xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CEC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN)) -/** - * @} - */ - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*-------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx-------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET) -#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -#endif /* STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART9EN)) -#define __HAL_RCC_UART10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART10EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM2EN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) != RESET) -#define __HAL_RCC_UART10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) == RESET) -#define __HAL_RCC_UART10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) - -#if defined(STM32F423xx) -#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST)) -#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Cx) -#define __HAL_RCC_AHB3_FORCE_RESET() -#define __HAL_RCC_AHB3_RELEASE_RESET() - -#define __HAL_RCC_FSMC_FORCE_RESET() -#define __HAL_RCC_QSPI_FORCE_RESET() - -#define __HAL_RCC_FSMC_RELEASE_RESET() -#define __HAL_RCC_QSPI_RELEASE_RESET() -#endif /* STM32F412Cx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART9RST)) -#define __HAL_RCC_UART10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART10RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM2RST)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART9RST)) -#define __HAL_RCC_UART10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART10RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM2RST)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN)) -#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART9LPEN)) -#define __HAL_RCC_UART10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART10LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART9LPEN)) -#define __HAL_RCC_UART10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART10LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------- PLL Configuration --------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz. - * - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - * @param __PLLR__ PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/ - STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \ - (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos))) -#else -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432 - * Except for STM32F411xE devices where Min_Data = 192. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz, Except for STM32F411xE devices - * where frequency is between 192 and 432 MHz. - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \ - (RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos))) - #endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------PLLI2S Configuration ---------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - -/** @brief Macros to enable or disable the PLLI2S. - * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) -#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F412Cx */ -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SP__ specifies division factor for SPDIFRX Clock. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLI2SP parameter is only available with STM32F446xx Devices - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((((__PLLI2SP__) >> 1U) -1U) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#else -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = (((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#endif /* STM32F446xx */ - -#if defined(STM32F411xE) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLLI2S jitter. - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#endif /* STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API) - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLI2SQ__ specifies the division factor for SAI1 clock. - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx - * Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6U) |\ - ((__PLLI2SQ__) << 24U) |\ - ((__PLLI2SR__) << 28U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------ PLLSAI Configuration ------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macros to Enable or Disable the PLLISAI. - * @note The PLLSAI is only available with STM32F429x/439x Devices. - * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE) -#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE) - -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIM__ specifies the division factor for PLLSAI VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * @note The PLLSAIM parameter is only used with STM32F446xx Devices - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__ specifies division factor for OTG FS, SDIO and RNG clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLSAIP parameter is only available with STM32F446xx Devices - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = ((__PLLSAIM__) | \ - ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ - ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) | \ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos))) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__ specifies division factor for SDIO and CLK48 clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\ - ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) | \ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivR__ specifies the PLLI2S division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SR) / __PLLI2SDivR__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(__PLLI2SDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, (__PLLI2SDivR__)-1U)) - -/** @brief Macro to configure the SAI clock Divider coming from PLL. - * @param __PLLDivR__ specifies the PLL division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLR) / __PLLDivR__ - */ -#define __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(__PLLDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, ((__PLLDivR__)-1U)<<8U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1U)) - -/** @brief Macro to configure the SAI clock Divider coming from PLLSAI. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock . - * This parameter must be a number between Min_Data = 1 and Max_Data = 32. - * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1U)<<8U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. - * - * @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock . - * This parameter must be a number between Min_Data = 2 and Max_Data = 16. - * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------- Peripheral Clock selection -----------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\ - defined(STM32F479xx) -/** @brief Macro to configure the I2S clock source (I2SCLK). - * @note This function must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__)) - - -/** @brief Macro to get the I2S clock source (I2SCLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin - * used as I2S clock source - */ -#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))) -#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block A clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to configure SAI1BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block B clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) -/** @brief Macro to configure SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI1 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC)) - -/** @brief Macro to configure SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI2 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC)) - -/** @brief Macro to configure I2S APB1 clock source selection. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__ specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the CEC clock. - * @param __SOURCE__ specifies the CEC clock source. - * This parameter can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CEC clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -/** @brief Macro to configure the SPDIFRX clock. - * @param __SOURCE__ specifies the SPDIFRX clock source. - * This parameter can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SPDIFRX clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL)) - -/** @brief Macro to configure the DSI clock. - * @param __SOURCE__ specifies the DSI clock source. - * This parameter can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the DSI clock. - * @retval The clock source can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL)) - -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - /** @brief Macro to configure the DFSDM1 clock. - * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. - * @retval None - */ -#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. - */ -#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) - -/** @brief Macro to configure DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ - STM32F413xx/STM32F423xx Devices. - * @param __SOURCE__ specifies the DFSDM1 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__))) - -/** @brief Macro to Get DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ - STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL)) - -#if defined(STM32F413xx) || defined(STM32F423xx) - /** @brief Macro to configure the DFSDM2 clock. - * @param __DFSDM2_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. - * @retval None - */ -#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM2_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. - */ -#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) - -/** @brief Macro to configure DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @param __SOURCE__ specifies the DFSDM2 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_DFSDM2AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL, (__SOURCE__))) - -/** @brief Macro to Get DFSDM2 Audio clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_GET_DFSDM2AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL)) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 BlockA clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_SAI_BLOCKA_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC)) - -/** @brief Macro to configure SAI1 BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 BlockB clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_SAI_BLOCKB_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC)) - -/** @brief Macro to configure the LPTIM1 clock. - * @param __SOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the LPTIM1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) -#endif /* STM32F413xx || STM32F423xx */ - -/** @brief Macro to configure I2S APB1 clock source selection. - * @param __SOURCE__ specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @param __SOURCE__ specifies the I2S APB2 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK). - * @note This macro must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - * @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @brief Macro to configure I2S clock source selection. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. - * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__))) - -/** @brief Macro to Get I2S clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. - * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. - */ -#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the LPTIM1 clock. - * @param __SOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the LPTIM1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the Timers clocks prescalers - * @note This feature is only available with STM32F429x/439x Devices. - * @param __PRESC__ specifies the Timers clocks prescalers selection - * This parameter can be one of the following values: - * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1 or 2, - * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to - * division by 4 or more. - * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, - * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding - * to division by 8 or more. - */ -#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\ - STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx ||\ - STM32F423xx */ - -/*----------------------------------------------------------------------------*/ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Enable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Disable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) - -/** @brief Clear the PLLSAI RDY interrupt pending bits. - */ -#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) - -/** @brief Check the PLLSAI RDY interrupt has occurred or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Check PLLSAI RDY flag is set or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @brief Macros to enable or disable the RCC MCO1 feature. - */ -#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE) -#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE) - -/** @brief Macros to enable or disable the RCC MCO2 feature. - */ -#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE) -#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE) - -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions - * @{ - */ - -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); - -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -void HAL_RCCEx_SelectLSEMode(uint8_t Mode); -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -#if defined(RCC_PLLI2S_SUPPORT) -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void); -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Constants RCCEx Private Constants - * @{ - */ - -/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -/* --- CR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/* Alias word address of PLLSAION bit */ -#define RCC_PLLSAION_BIT_NUMBER 0x1CU -#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLSAION_BIT_NUMBER * 4U)) - -#define PLLSAI_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Alias word address of PLLI2SON bit */ -#define RCC_PLLI2SON_BIT_NUMBER 0x1AU -#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLI2SON_BIT_NUMBER * 4U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/* --- DCKCFGR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ - defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Alias word address of TIMPRE bit */ -#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8CU) -#define RCC_TIMPRE_BIT_NUMBER 0x18U -#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32U) + (RCC_TIMPRE_BIT_NUMBER * 4U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\ - STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/* --- CFGR Register ---*/ -#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U) -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) -/* Alias word address of I2SSRC bit */ -#define RCC_I2SSRC_BIT_NUMBER 0x17U -#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_I2SSRC_BIT_NUMBER * 4U)) - -#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/* --- PLLI2SCFGR Register ---*/ -#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U) -/* Alias word address of PLLI2SSRC bit */ -#define RCC_PLLI2SSRC_BIT_NUMBER 0x16U -#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32U) + (RCC_PLLI2SSRC_BIT_NUMBER * 4U)) - -#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx | STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/* Alias word address of MCO1EN bit */ -#define RCC_MCO1EN_BIT_NUMBER 0x8U -#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO1EN_BIT_NUMBER * 4U)) - -/* Alias word address of MCO2EN bit */ -#define RCC_MCO2EN_BIT_NUMBER 0x9U -#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO2EN_BIT_NUMBER * 4U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#define PLL_TIMEOUT_VALUE 2U /* 2 ms */ -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000007FU)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000007U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000000FU)) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000001FU)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F446xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000001FFU)) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000003FFU)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00007FFFU)) -#endif /* STM32F413xx || STM32F423xx */ - -#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) - -#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ - ((VALUE) == RCC_PLLSAIDIVR_4) ||\ - ((VALUE) == RCC_PLLSAIDIVR_8) ||\ - ((VALUE) == RCC_PLLSAIDIVR_16)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PLLI2SM_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 63U)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F446xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\ - ((VALUE) == RCC_PLLI2SP_DIV4) ||\ - ((VALUE) == RCC_PLLI2SP_DIV6) ||\ - ((VALUE) == RCC_PLLI2SP_DIV8)) - -#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_EXT)) - -#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_CECCLKSOURCE_LSE)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \ - ((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S1) || \ - ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S2)) - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_DFSDM2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM2CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM2AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S1) || \ - ((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S2)) - -#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_SAIACLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIACLKSOURCE_PLLI2SR) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_PLLSRC)) - -#define IS_RCC_SAIBCLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIBCLKSOURCE_PLLI2SR) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_PLLSRC)) - -#define IS_RCC_PLL_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLI2S_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#endif /* STM32F413xx || STM32F423xx */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) - -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \ - STM32F412Rx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h deleted file mode 100644 index 7d4dca1..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h +++ /dev/null @@ -1,361 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rng.h - * @author MCD Application Team - * @brief Header file of RNG HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_RNG_H -#define STM32F4xx_HAL_RNG_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (RNG) - -/** @defgroup RNG RNG - * @brief RNG HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RNG_Exported_Types RNG Exported Types - * @{ - */ - -/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition - * @{ - */ - -/** - * @} - */ - -/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition - * @{ - */ -typedef enum -{ - HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */ - HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */ - HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */ - HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */ - HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */ - -} HAL_RNG_StateTypeDef; - -/** - * @} - */ - -/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition - * @{ - */ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -typedef struct __RNG_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ -{ - RNG_TypeDef *Instance; /*!< Register base address */ - - HAL_LockTypeDef Lock; /*!< RNG locking object */ - - __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ - - __IO uint32_t ErrorCode; /*!< RNG Error code */ - - uint32_t RandomNumber; /*!< Last Generated RNG Data */ - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */ - void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */ - - void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */ - void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */ -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -} RNG_HandleTypeDef; - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -/** - * @brief HAL RNG Callback ID enumeration definition - */ -typedef enum -{ - HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */ - - HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */ - HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */ - -} HAL_RNG_CallbackIDTypeDef; - -/** - * @brief HAL RNG Callback pointer definition - */ -typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */ -typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */ - -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RNG_Exported_Constants RNG Exported Constants - * @{ - */ - -/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition - * @{ - */ -#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */ -#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */ -#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */ -/** - * @} - */ - -/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition - * @{ - */ -#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */ -#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */ -#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */ -/** - * @} - */ - -/** @defgroup RNG_Error_Definition RNG Error Definition - * @{ - */ -#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */ -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ -#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ -#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ -#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */ -#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup RNG_Exported_Macros RNG Exported Macros - * @{ - */ - -/** @brief Reset RNG handle state - * @param __HANDLE__ RNG Handle - * @retval None - */ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_RNG_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @brief Enables the RNG peripheral. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN) - -/** - * @brief Disables the RNG peripheral. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN) - -/** - * @brief Check the selected RNG flag status. - * @param __HANDLE__ RNG Handle - * @param __FLAG__ RNG flag - * This parameter can be one of the following values: - * @arg RNG_FLAG_DRDY: Data ready - * @arg RNG_FLAG_CECS: Clock error current status - * @arg RNG_FLAG_SECS: Seed error current status - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** - * @brief Clears the selected RNG flag status. - * @param __HANDLE__ RNG handle - * @param __FLAG__ RNG flag to clear - * @note WARNING: This is a dummy macro for HAL code alignment, - * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only. - * @retval None - */ -#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */ - -/** - * @brief Enables the RNG interrupts. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE) - -/** - * @brief Disables the RNG interrupts. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE) - -/** - * @brief Checks whether the specified RNG interrupt has occurred or not. - * @param __HANDLE__ RNG Handle - * @param __INTERRUPT__ specifies the RNG interrupt status flag to check. - * This parameter can be one of the following values: - * @arg RNG_IT_DRDY: Data ready interrupt - * @arg RNG_IT_CEI: Clock error interrupt - * @arg RNG_IT_SEI: Seed error interrupt - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clear the RNG interrupt status flags. - * @param __HANDLE__ RNG Handle - * @param __INTERRUPT__ specifies the RNG interrupt status flag to clear. - * This parameter can be one of the following values: - * @arg RNG_IT_CEI: Clock error interrupt - * @arg RNG_IT_SEI: Seed error interrupt - * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY. - * @retval None - */ -#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RNG_Exported_Functions RNG Exported Functions - * @{ - */ - -/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions - * @{ - */ -HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); -HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng); -void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); -void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, - pRNG_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef - *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */ -uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef - *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */ -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit); -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng); -uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng); - -void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng); -void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng); -void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit); - -/** - * @} - */ - -/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions - * @{ - */ -HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng); -uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng); -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RNG_Private_Macros RNG Private Macros - * @{ - */ -#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \ - ((IT) == RNG_IT_SEI)) - -#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ - ((FLAG) == RNG_FLAG_CECS) || \ - ((FLAG) == RNG_FLAG_SECS)) - -/** - * @} - */ - -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_RNG_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h deleted file mode 100644 index 24affc5..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h +++ /dev/null @@ -1,915 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rtc.h - * @author MCD Application Team - * @brief Header file of RTC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_RTC_H -#define STM32F4xx_HAL_RTC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ - -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RTC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RTC_Exported_Types RTC Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ - HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ - HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ - HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ - HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ -} HAL_RTCStateTypeDef; - -/** - * @brief RTC Configuration Structure definition - */ -typedef struct -{ - uint32_t HourFormat; /*!< Specifies the RTC Hour Format. - This parameter can be a value of @ref RTC_Hour_Formats */ - - uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ - - uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FFF */ - - uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. - This parameter can be a value of @ref RTC_Output_selection_Definitions */ - - uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. - This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ - - uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. - This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ -} RTC_InitTypeDef; - -/** - * @brief RTC Time structure definition - */ -typedef struct -{ - uint8_t Hours; /*!< Specifies the RTC Time Hour. - This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected - This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ - - uint8_t Minutes; /*!< Specifies the RTC Time Minutes. - This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ - - uint8_t Seconds; /*!< Specifies the RTC Time Seconds. - This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ - - uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. - This parameter can be a value of @ref RTC_AM_PM_Definitions */ - - uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. - This parameter corresponds to a time unit range between [0-1] Second - with [1 Sec / SecondFraction +1] granularity */ - - uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content - corresponding to Synchronous prescaler factor value (PREDIV_S) - This parameter corresponds to a time unit range between [0-1] Second - with [1 Sec / SecondFraction +1] granularity. - This field will be used only by HAL_RTC_GetTime function */ - - uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight - Saving Time, please use HAL_RTC_DST_xxx functions */ - - uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight - Saving Time, please use HAL_RTC_DST_xxx functions */ -} RTC_TimeTypeDef; - -/** - * @brief RTC Date structure definition - */ -typedef struct -{ - uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. - This parameter can be a value of @ref RTC_WeekDay_Definitions */ - - uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). - This parameter can be a value of @ref RTC_Month_Date_Definitions */ - - uint8_t Date; /*!< Specifies the RTC Date. - This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ - - uint8_t Year; /*!< Specifies the RTC Date Year. - This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ - -} RTC_DateTypeDef; - -/** - * @brief RTC Alarm structure definition - */ -typedef struct -{ - RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ - - uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. - This parameter can be a value of @ref RTC_AlarmMask_Definitions */ - - uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. - This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ - - uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. - This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ - - uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. - If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. - If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ - - uint32_t Alarm; /*!< Specifies the alarm . - This parameter can be a value of @ref RTC_Alarms_Definitions */ -} RTC_AlarmTypeDef; - -/** - * @brief RTC Handle Structure definition - */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) -typedef struct __RTC_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ -{ - RTC_TypeDef *Instance; /*!< Register base address */ - - RTC_InitTypeDef Init; /*!< RTC required parameters */ - - HAL_LockTypeDef Lock; /*!< RTC locking object */ - - __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ - -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - void (* AlarmAEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */ - - void (* AlarmBEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm B Event callback */ - - void (* TimeStampEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Timestamp Event callback */ - - void (* WakeUpTimerEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC WakeUpTimer Event callback */ - - void (* Tamper1EventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */ - -#if defined(RTC_TAMPER2_SUPPORT) - void (* Tamper2EventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 2 Event callback */ -#endif /* RTC_TAMPER2_SUPPORT */ - - void (* MspInitCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */ - - void (* MspDeInitCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */ - -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - -} RTC_HandleTypeDef; - -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL RTC Callback ID enumeration definition - */ -typedef enum -{ - HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00U, /*!< RTC Alarm A Event Callback ID */ - HAL_RTC_ALARM_B_EVENT_CB_ID = 0x01U, /*!< RTC Alarm B Event Callback ID */ - HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC Timestamp Event Callback ID */ - HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03U, /*!< RTC Wakeup Timer Event Callback ID */ - HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04U, /*!< RTC Tamper 1 Callback ID */ -#if defined(RTC_TAMPER2_SUPPORT) - HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05U, /*!< RTC Tamper 2 Callback ID */ -#endif /* RTC_TAMPER2_SUPPORT */ - HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */ - HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */ -} HAL_RTC_CallbackIDTypeDef; - -/** - * @brief HAL RTC Callback pointer definition - */ -typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */ -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RTC_Exported_Constants RTC Exported Constants - * @{ - */ - -/** @defgroup RTC_Hour_Formats RTC Hour Formats - * @{ - */ -#define RTC_HOURFORMAT_24 0x00000000U -#define RTC_HOURFORMAT_12 RTC_CR_FMT -/** - * @} - */ - -/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions - * @{ - */ -#define RTC_OUTPUT_DISABLE 0x00000000U -#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 -#define RTC_OUTPUT_ALARMB RTC_CR_OSEL_1 -#define RTC_OUTPUT_WAKEUP RTC_CR_OSEL -/** - * @} - */ - -/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions - * @{ - */ -#define RTC_OUTPUT_POLARITY_HIGH 0x00000000U -#define RTC_OUTPUT_POLARITY_LOW RTC_CR_POL -/** - * @} - */ - -/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT - * @{ - */ -#define RTC_OUTPUT_TYPE_OPENDRAIN 0x00000000U -#define RTC_OUTPUT_TYPE_PUSHPULL RTC_TAFCR_ALARMOUTTYPE -/** - * @} - */ - -/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions - * @{ - */ -#define RTC_HOURFORMAT12_AM ((uint8_t)0x00) -#define RTC_HOURFORMAT12_PM ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions - * @{ - */ -#define RTC_DAYLIGHTSAVING_SUB1H RTC_CR_SUB1H -#define RTC_DAYLIGHTSAVING_ADD1H RTC_CR_ADD1H -#define RTC_DAYLIGHTSAVING_NONE 0x00000000U -/** - * @} - */ - -/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions - * @{ - */ -#define RTC_STOREOPERATION_RESET 0x00000000U -#define RTC_STOREOPERATION_SET RTC_CR_BKP -/** - * @} - */ - -/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions - * @{ - */ -#define RTC_FORMAT_BIN 0x00000000U -#define RTC_FORMAT_BCD 0x00000001U -/** - * @} - */ - -/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions (in BCD format) - * @{ - */ -#define RTC_MONTH_JANUARY ((uint8_t)0x01) -#define RTC_MONTH_FEBRUARY ((uint8_t)0x02) -#define RTC_MONTH_MARCH ((uint8_t)0x03) -#define RTC_MONTH_APRIL ((uint8_t)0x04) -#define RTC_MONTH_MAY ((uint8_t)0x05) -#define RTC_MONTH_JUNE ((uint8_t)0x06) -#define RTC_MONTH_JULY ((uint8_t)0x07) -#define RTC_MONTH_AUGUST ((uint8_t)0x08) -#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) -#define RTC_MONTH_OCTOBER ((uint8_t)0x10) -#define RTC_MONTH_NOVEMBER ((uint8_t)0x11) -#define RTC_MONTH_DECEMBER ((uint8_t)0x12) -/** - * @} - */ - -/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions - * @{ - */ -#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) -#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) -#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) -#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) -#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) -#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) -#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07) -/** - * @} - */ - -/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions - * @{ - */ -#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000U -#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL -/** - * @} - */ - -/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions - * @{ - */ -#define RTC_ALARMMASK_NONE 0x00000000U -#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 -#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 -#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 -#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 -#define RTC_ALARMMASK_ALL (RTC_ALARMMASK_DATEWEEKDAY | \ - RTC_ALARMMASK_HOURS | \ - RTC_ALARMMASK_MINUTES | \ - RTC_ALARMMASK_SECONDS) -/** - * @} - */ - -/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions - * @{ - */ -#define RTC_ALARM_A RTC_CR_ALRAE -#define RTC_ALARM_B RTC_CR_ALRBE -/** - * @} - */ - -/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions - * @{ - */ -/*!< All Alarm SS fields are masked. There is no comparison on sub seconds for Alarm */ -#define RTC_ALARMSUBSECONDMASK_ALL 0x00000000U -/*!< SS[14:1] are don't care in Alarm comparison. Only SS[0] is compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 -/*!< SS[14:2] are don't care in Alarm comparison. Only SS[1:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 -/*!< SS[14:3] are don't care in Alarm comparison. Only SS[2:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_3 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1) -/*!< SS[14:4] are don't care in Alarm comparison. Only SS[3:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 -/*!< SS[14:5] are don't care in Alarm comparison. Only SS[4:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_5 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2) -/*!< SS[14:6] are don't care in Alarm comparison. Only SS[5:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_6 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) -/*!< SS[14:7] are don't care in Alarm comparison. Only SS[6:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_7 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) -/*!< SS[14:8] are don't care in Alarm comparison. Only SS[7:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 -/*!< SS[14:9] are don't care in Alarm comparison. Only SS[8:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_9 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3) -/*!< SS[14:10] are don't care in Alarm comparison. Only SS[9:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_10 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) -/*!< SS[14:11] are don't care in Alarm comparison. Only SS[10:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_11 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) -/*!< SS[14:12] are don't care in Alarm comparison. Only SS[11:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_12 (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) -/*!< SS[14:13] are don't care in Alarm comparison. Only SS[12:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_13 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) -/*!< SS[14] is don't care in Alarm comparison. Only SS[13:0] are compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) -/*!< SS[14:0] are compared and must match to activate alarm. */ -#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS -/** - * @} - */ - -/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions - * @{ - */ -#define RTC_IT_TS RTC_CR_TSIE /*!< Enable Timestamp Interrupt */ -#define RTC_IT_WUT RTC_CR_WUTIE /*!< Enable Wakeup timer Interrupt */ -#define RTC_IT_ALRB RTC_CR_ALRBIE /*!< Enable Alarm B Interrupt */ -#define RTC_IT_ALRA RTC_CR_ALRAIE /*!< Enable Alarm A Interrupt */ -/** - * @} - */ - -/** @defgroup RTC_Flags_Definitions RTC Flags Definitions - * @{ - */ -#define RTC_FLAG_RECALPF RTC_ISR_RECALPF /*!< Recalibration pending flag */ -#if defined(RTC_TAMPER2_SUPPORT) -#define RTC_FLAG_TAMP2F RTC_ISR_TAMP2F /*!< Tamper 2 event flag */ -#endif /* RTC_TAMPER2_SUPPORT */ -#define RTC_FLAG_TAMP1F RTC_ISR_TAMP1F /*!< Tamper 1 event flag */ -#define RTC_FLAG_TSOVF RTC_ISR_TSOVF /*!< Timestamp overflow flag */ -#define RTC_FLAG_TSF RTC_ISR_TSF /*!< Timestamp event flag */ -#define RTC_FLAG_WUTF RTC_ISR_WUTF /*!< Wakeup timer event flag */ -#define RTC_FLAG_ALRBF RTC_ISR_ALRBF /*!< Alarm B event flag */ -#define RTC_FLAG_ALRAF RTC_ISR_ALRAF /*!< Alarm A event flag */ -#define RTC_FLAG_INITF RTC_ISR_INITF /*!< RTC in initialization mode flag */ -#define RTC_FLAG_RSF RTC_ISR_RSF /*!< Register synchronization flag */ -#define RTC_FLAG_INITS RTC_ISR_INITS /*!< RTC initialization status flag */ -#define RTC_FLAG_SHPF RTC_ISR_SHPF /*!< Shift operation pending flag */ -#define RTC_FLAG_WUTWF RTC_ISR_WUTWF /*!< WUTR register write allowance flag */ -#define RTC_FLAG_ALRBWF RTC_ISR_ALRBWF /*!< ALRMBR register write allowance flag */ -#define RTC_FLAG_ALRAWF RTC_ISR_ALRAWF /*!< ALRMAR register write allowance flag */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup RTC_Exported_Macros RTC Exported Macros - * @{ - */ - -/** @brief Reset RTC handle state - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) -#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_RTC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - -/** - * @brief Disable the write protection for RTC registers. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) do { \ - (__HANDLE__)->Instance->WPR = 0xCAU; \ - (__HANDLE__)->Instance->WPR = 0x53U; \ - } while(0U) - -/** - * @brief Enable the write protection for RTC registers. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) do { \ - (__HANDLE__)->Instance->WPR = 0xFFU; \ - } while(0U) - - -/** - * @brief Enable the RTC ALARMA peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) - -/** - * @brief Disable the RTC ALARMA peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) - -/** - * @brief Enable the RTC ALARMB peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE)) - -/** - * @brief Disable the RTC ALARMB peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE)) - -/** - * @brief Enable the RTC Alarm interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Alarm interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC Alarm interrupt has occurred or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Alarm interrupt to check. - * This parameter can be: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) - -/** - * @brief Get the selected RTC Alarm's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Alarm Flag to check. - * This parameter can be: - * @arg RTC_FLAG_ALRAF: Alarm A interrupt flag - * @arg RTC_FLAG_ALRAWF: Alarm A 'write allowed' flag - * @arg RTC_FLAG_ALRBF: Alarm B interrupt flag - * @arg RTC_FLAG_ALRBWF: Alarm B 'write allowed' flag - * @retval None - */ -#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) - -/** - * @brief Clear the RTC Alarm's pending flags. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Alarm flag to be cleared. - * This parameter can be: - * @arg RTC_FLAG_ALRAF - * @arg RTC_FLAG_ALRBF - * @retval None - */ -#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) - -/** - * @brief Enable interrupt on the RTC Alarm associated EXTI line. - * @retval None - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable interrupt on the RTC Alarm associated EXTI line. - * @retval None - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Enable event on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable event on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Enable falling edge trigger on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Enable rising edge trigger on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Enable rising & falling edge trigger on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0U) - -/** - * @brief Disable rising & falling edge trigger on the RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0U) - -/** - * @brief Check whether the RTC Alarm associated EXTI line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Clear the RTC Alarm associated EXTI line flag. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Generate a Software interrupt on RTC Alarm associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT) -/** - * @} - */ - -/* Include RTC HAL Extended module */ -#include "stm32f4xx_hal_rtc_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup RTC_Exported_Functions - * @{ - */ - -/** @addtogroup RTC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); -void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); -void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group2 - * @{ - */ -/* RTC Time and Date functions ************************************************/ -HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group3 - * @{ - */ -/* RTC Alarm functions ********************************************************/ -HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); -HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); -void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc); - -/* RTC Daylight Saving Time functions *****************************************/ -void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc); -void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc); -void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc); -void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc); -uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group5 - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ - -/** @defgroup RTC_Private_Constants RTC Private Constants - * @{ - */ -/* Masks Definition */ -#define RTC_TR_RESERVED_MASK ((uint32_t)(RTC_TR_HT | RTC_TR_HU | \ - RTC_TR_MNT | RTC_TR_MNU | \ - RTC_TR_ST | RTC_TR_SU | \ - RTC_TR_PM)) -#define RTC_DR_RESERVED_MASK ((uint32_t)(RTC_DR_YT | RTC_DR_YU | \ - RTC_DR_MT | RTC_DR_MU | \ - RTC_DR_DT | RTC_DR_DU | \ - RTC_DR_WDU)) -#define RTC_INIT_MASK 0xFFFFFFFFU -#define RTC_RSF_MASK ((uint32_t)~(RTC_ISR_INIT | RTC_ISR_RSF)) -#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_INITF | RTC_FLAG_INITS | \ - RTC_FLAG_ALRAF | RTC_FLAG_ALRAWF | \ - RTC_FLAG_ALRBF | RTC_FLAG_ALRBWF | \ - RTC_FLAG_WUTF | RTC_FLAG_WUTWF | \ - RTC_FLAG_RECALPF | RTC_FLAG_SHPF | \ - RTC_FLAG_TSF | RTC_FLAG_TSOVF | \ - RTC_FLAG_RSF | RTC_TAMPER_FLAGS_MASK)) - -#define RTC_TIMEOUT_VALUE 1000U - -#define RTC_EXTI_LINE_ALARM_EVENT EXTI_IMR_MR17 /*!< External interrupt line 17 Connected to the RTC Alarm event */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ - -/** @defgroup RTC_Private_Macros RTC Private Macros - * @{ - */ - -/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters - * @{ - */ -#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ - ((FORMAT) == RTC_HOURFORMAT_24)) - -#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ - ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ - ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ - ((OUTPUT) == RTC_OUTPUT_WAKEUP)) - -#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ - ((POL) == RTC_OUTPUT_POLARITY_LOW)) - -#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ - ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) - -#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FU) -#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFFU) - -#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0U) && ((HOUR) <= 12U)) -#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U) -#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U) -#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U) - -#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \ - ((PM) == RTC_HOURFORMAT12_PM)) - -#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ - ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ - ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) - -#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ - ((OPERATION) == RTC_STOREOPERATION_SET)) - -#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) - -#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U) -#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U)) -#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U)) - -#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) - -#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U)) - -#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) - -#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ - ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) - -#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ((uint32_t)~RTC_ALARMMASK_ALL)) == 0U) - -#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B)) - -#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS) - -#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RTC_Private_Functions RTC Private Functions - * @{ - */ -HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); -uint8_t RTC_ByteToBcd2(uint8_t number); -uint8_t RTC_Bcd2ToByte(uint8_t number); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_RTC_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h deleted file mode 100644 index ff5f14d..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h +++ /dev/null @@ -1,1079 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rtc_ex.h - * @author MCD Application Team - * @brief Header file of RTC HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_RTC_EX_H -#define STM32F4xx_HAL_RTC_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ - -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RTCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RTCEx_Exported_Types RTCEx Exported Types - * @{ - */ - -/** - * @brief RTC Tamper structure definition - */ -typedef struct -{ - uint32_t Tamper; /*!< Specifies the Tamper Pin. - This parameter can be a value of @ref RTCEx_Tamper_Pin_Definitions */ - - uint32_t PinSelection; /*!< Specifies the Tamper Pin. - This parameter can be a value of @ref RTCEx_Tamper_Pin_Selection */ - - uint32_t Trigger; /*!< Specifies the Tamper Trigger. - This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ - - uint32_t Filter; /*!< Specifies the RTC Filter Tamper. - This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ - - uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. - This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ - - uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . - This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ - - uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . - This parameter can be a value of @ref RTCEx_Tamper_Pull_Up_Definitions */ - - uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. - This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ -} RTC_TamperTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants - * @{ - */ - -/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definitions - * @{ - */ -#define RTC_BKP_DR0 0x00000000U -#define RTC_BKP_DR1 0x00000001U -#define RTC_BKP_DR2 0x00000002U -#define RTC_BKP_DR3 0x00000003U -#define RTC_BKP_DR4 0x00000004U -#define RTC_BKP_DR5 0x00000005U -#define RTC_BKP_DR6 0x00000006U -#define RTC_BKP_DR7 0x00000007U -#define RTC_BKP_DR8 0x00000008U -#define RTC_BKP_DR9 0x00000009U -#define RTC_BKP_DR10 0x0000000AU -#define RTC_BKP_DR11 0x0000000BU -#define RTC_BKP_DR12 0x0000000CU -#define RTC_BKP_DR13 0x0000000DU -#define RTC_BKP_DR14 0x0000000EU -#define RTC_BKP_DR15 0x0000000FU -#define RTC_BKP_DR16 0x00000010U -#define RTC_BKP_DR17 0x00000011U -#define RTC_BKP_DR18 0x00000012U -#define RTC_BKP_DR19 0x00000013U -/** - * @} - */ - -/** @defgroup RTCEx_Timestamp_Edges_Definitions RTCEx Timestamp Edges Definitions - * @{ - */ -#define RTC_TIMESTAMPEDGE_RISING 0x00000000U -#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE -/** - * @} - */ - -/** @defgroup RTCEx_Timestamp_Pin_Selection RTC Timestamp Pin Selection - * @{ - */ -#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U -#if defined(RTC_AF2_SUPPORT) -#define RTC_TIMESTAMPPIN_POS1 RTC_TAFCR_TSINSEL -#endif /* RTC_AF2_SUPPORT */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pin_Definitions RTCEx Tamper Pins Definitions - * @{ - */ -#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E -#if defined(RTC_TAMPER2_SUPPORT) -#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E -#endif /* RTC_TAMPER2_SUPPORT */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pin_Selection RTC tamper Pins Selection - * @{ - */ -#define RTC_TAMPERPIN_DEFAULT 0x00000000U -#if defined(RTC_AF2_SUPPORT) -#define RTC_TAMPERPIN_POS1 RTC_TAFCR_TAMP1INSEL -#endif /* RTC_AF2_SUPPORT */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions - * @{ - */ -#define RTC_IT_TAMP RTC_TAFCR_TAMPIE /*!< Enable global Tamper Interrupt */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Triggers Definitions - * @{ - */ -#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U -#define RTC_TAMPERTRIGGER_FALLINGEDGE RTC_TAFCR_TAMP1TRG -#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE -#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions - * @{ - */ -#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ - -#define RTC_TAMPERFILTER_2SAMPLE RTC_TAFCR_TAMPFLT_0 /*!< Tamper is activated after 2 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_4SAMPLE RTC_TAFCR_TAMPFLT_1 /*!< Tamper is activated after 4 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_8SAMPLE RTC_TAFCR_TAMPFLT /*!< Tamper is activated after 8 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_MASK RTC_TAFCR_TAMPFLT /*!< Masking all bits except those of - field TAMPFLT */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions - * @{ - */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 32768 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAFCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 16384 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAFCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 8192 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 4096 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAFCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 2048 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 1024 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 512 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 RTC_TAFCR_TAMPFREQ /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 256 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK RTC_TAFCR_TAMPFREQ /*!< Masking all bits except those of - field TAMPFREQ */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions - * @{ - */ -#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before - sampling during 1 RTCCLK cycle */ -#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAFCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before - sampling during 2 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAFCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before - sampling during 4 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK RTC_TAFCR_TAMPPRCH /*!< Tamper pins are pre-charged before - sampling during 8 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_MASK RTC_TAFCR_TAMPPRCH /*!< Masking all bits except those of - field TAMPPRCH */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pull_Up_Definitions RTCEx Tamper Pull Up Definitions - * @{ - */ -#define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */ -#define RTC_TAMPER_PULLUP_DISABLE RTC_TAFCR_TAMPPUDIS /*!< Tamper pins are not pre-charged before sampling */ -#define RTC_TAMPER_PULLUP_MASK RTC_TAFCR_TAMPPUDIS /*!< Masking all bits except bit TAMPPUDIS */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions - * @{ - */ -#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAFCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ -#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */ -#define RTC_TIMESTAMPONTAMPERDETECTION_MASK RTC_TAFCR_TAMPTS /*!< Masking all bits except bit TAMPTS */ -/** - * @} - */ - -/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions - * @{ - */ -#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U -#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 -#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 -#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) -#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 -#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) -/** - * @} - */ - -/** @defgroup RTCEx_Coarse_Calibration_Definitions RTCEx Coarse Calib Definitions - * @{ - */ -#define RTC_CALIBSIGN_POSITIVE 0x00000000U -#define RTC_CALIBSIGN_NEGATIVE RTC_CALIBR_DCS -/** - * @} - */ - -/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth Calib Period Definitions - * @{ - */ -#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, smooth calibration - period is 32s, otherwise 2^20 RTCCLK pulses */ -#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, smooth calibration - period is 16s, otherwise 2^19 RTCCLK pulses */ -#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, smooth calibration - period is 8s, otherwise 2^18 RTCCLK pulses */ -/** - * @} - */ - -/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth Calib Plus Pulses Definitions - * @{ - */ -#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added - during a X -second window = Y - CALM[8:0] - with Y = 512, 256, 128 when X = 32, 16, 8 */ -#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited - during a 32-second window = CALM[8:0] */ -/** - * @} - */ - -/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions - * @{ - */ -#define RTC_SHIFTADD1S_RESET 0x00000000U -#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S -/** - * @} - */ - -/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output Selection Definitions - * @{ - */ -#define RTC_CALIBOUTPUT_512HZ 0x00000000U -#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros - * @{ - */ - -/* ---------------------------------WAKEUPTIMER-------------------------------*/ - -/** @defgroup RTCEx_WakeUp_Timer RTCEx WakeUp Timer - * @{ - */ - -/** - * @brief Enable the RTC WakeUp Timer peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) - -/** - * @brief Disable the RTC Wakeup Timer peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) - -/** - * @brief Enable the RTC Wakeup Timer interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Wakeup Timer interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_WUT: Wakeup Timer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Wakeup Timer interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Wakeup Timer interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_WUT: Wakeup Timer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC Wakeup Timer interrupt has occurred or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Wakeup Timer interrupt to check. - * This parameter can be: - * @arg RTC_IT_WUT: Wakeup Timer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) - -/** - * @brief Check whether the specified RTC Wakeup timer interrupt has been enabled or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Wakeup timer interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) - -/** - * @brief Get the selected RTC Wakeup Timer's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Wakeup Timer flag to check. - * This parameter can be: - * @arg RTC_FLAG_WUTF: Wakeup Timer interrupt flag - * @arg RTC_FLAG_WUTWF: Wakeup Timer 'write allowed' flag - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) - -/** - * @brief Clear the RTC Wakeup timer's pending flags. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Wakeup Timer Flag to clear. - * This parameter can be: - * @arg RTC_FLAG_WUTF: Wakeup Timer interrupt Flag - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Enable interrupt on the RTC Wakeup Timer associated EXTI line. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable interrupt on the RTC Wakeup Timer associated EXTI line. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Enable event on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable event on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Enable falling edge trigger on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Enable rising edge trigger on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Enable rising & falling edge trigger on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0U) - -/** - * @brief Disable rising & falling edge trigger on the RTC Wakeup Timer associated EXTI line. - * This parameter can be: - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0U) - -/** - * @brief Check whether the RTC Wakeup Timer associated EXTI line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Clear the RTC Wakeup Timer associated EXTI line flag. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Generate a Software interrupt on the RTC Wakeup Timer associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @} - */ - -/* ---------------------------------TIMESTAMP---------------------------------*/ - -/** @defgroup RTCEx_Timestamp RTCEx Timestamp - * @{ - */ - -/** - * @brief Enable the RTC Timestamp peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) - -/** - * @brief Disable the RTC Timestamp peripheral. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) - -/** - * @brief Enable the RTC Timestamp interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Timestamp interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Timestamp interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Timestamp interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC Timestamp interrupt has occurred or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Timestamp interrupt to check. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) - -/** - * @brief Check whether the specified RTC Timestamp interrupt has been enabled or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Timestamp interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) - -/** - * @brief Get the selected RTC Timestamp's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Timestamp flag to check. - * This parameter can be: - * @arg RTC_FLAG_TSF: Timestamp interrupt flag - * @arg RTC_FLAG_TSOVF: Timestamp overflow flag - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) - -/** - * @brief Clear the RTC Timestamp's pending flags. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Timestamp flag to clear. - * This parameter can be: - * @arg RTC_FLAG_TSF: Timestamp interrupt flag - * @arg RTC_FLAG_TSOVF: Timestamp overflow flag - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @} - */ - -/* ---------------------------------TAMPER------------------------------------*/ - -/** @defgroup RTCEx_Tamper RTCEx Tamper - * @{ - */ - -/** - * @brief Enable the RTC Tamper1 input detection. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E)) - -/** - * @brief Disable the RTC Tamper1 input detection. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E)) - -#if defined(RTC_TAMPER2_SUPPORT) -/** - * @brief Enable the RTC Tamper2 input detection. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E)) - -/** - * @brief Disable the RTC Tamper2 input detection. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E)) -#endif /* RTC_TAMPER2_SUPPORT */ - -/** - * @brief Enable the RTC Tamper interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TAMP: Tamper global interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Tamper interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TAMP: Tamper global interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC Tamper interrupt has occurred or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. - * This parameter can be: - * @arg RTC_IT_TAMP1: Tamper 1 interrupt - * @arg RTC_IT_TAMP2: Tamper 2 interrupt - * @note RTC_IT_TAMP2 is not applicable to all devices. - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) - -/** - * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TAMP: Tamper global interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) - -/** - * @brief Get the selected RTC Tamper's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Tamper flag to be checked. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper 1 interrupt flag - * @arg RTC_FLAG_TAMP2F: Tamper 2 interrupt flag - * @note RTC_FLAG_TAMP2F is not applicable to all devices. - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) - -/** - * @brief Clear the RTC Tamper's pending flags. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Tamper Flag to clear. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper 1 interrupt flag - * @arg RTC_FLAG_TAMP2F: Tamper 2 interrupt flag - * @note RTC_FLAG_TAMP2F is not applicable to all devices. - * @retval None - */ -#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) -/** - * @} - */ - -/* --------------------------TAMPER/TIMESTAMP---------------------------------*/ -/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI - * @{ - */ - -/** - * @brief Enable interrupt on the RTC Tamper and Timestamp associated EXTI line. - * @retval None - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable interrupt on the RTC Tamper and Timestamp associated EXTI line. - * @retval None - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Enable event on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable event on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated EXTI line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0U) - -/** - * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated EXTI line. - * This parameter can be: - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0U) - -/** - * @brief Check whether the RTC Tamper and Timestamp associated EXTI line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Clear the RTC Tamper and Timestamp associated EXTI line flag. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated EXTI line - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) -/** - * @} - */ - -/* ------------------------------CALIBRATION----------------------------------*/ - -/** @defgroup RTCEx_Calibration RTCEx Calibration - * @{ - */ - -/** - * @brief Enable the Coarse calibration process. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE)) - -/** - * @brief Disable the Coarse calibration process. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE)) - -/** - * @brief Enable the RTC calibration output. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) - -/** - * @brief Disable the calibration output. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) - -/** - * @brief Enable the clock reference detection. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) - -/** - * @brief Disable the clock reference detection. - * @param __HANDLE__ specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) - -/** - * @brief Get the selected RTC shift operation's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_SHPF: Shift pending flag - * @retval None - */ -#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions - * @{ - */ - -/** @addtogroup RTCEx_Exported_Functions_Group1 - * @{ - */ -/* RTC Timestamp and Tamper functions *****************************************/ -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin); -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin); -HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); - -HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); -HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); -HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); -void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); - -void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); -#if defined(RTC_TAMPER2_SUPPORT) -void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); -#endif /* RTC_TAMPER2_SUPPORT */ -void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -#if defined(RTC_TAMPER2_SUPPORT) -HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -#endif /* RTC_TAMPER2_SUPPORT */ -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group2 - * @{ - */ -/* RTC Wakeup functions ******************************************************/ -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); -HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); -uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group3 - * @{ - */ -/* Extended Control functions ************************************************/ -void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); -uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); - -HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value); -HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); -HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); -HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); -HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group4 - * @{ - */ -/* Extended RTC features functions *******************************************/ -void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ - -/** @defgroup RTCEx_Private_Constants RTCEx Private Constants - * @{ - */ -#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT EXTI_IMR_MR21 /*!< External interrupt line 21 Connected to the RTC Tamper and Timestamp event */ -#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR_MR22 /*!< External interrupt line 22 Connected to the RTC Wakeup event */ -/** - * @} - */ - -/** @defgroup RTCEx_Private_Constants RTCEx Private Constants - * @{ - */ -/* Masks Definition */ -#if defined(RTC_TAMPER2_SUPPORT) -#define RTC_TAMPER_ENABLE_BITS_MASK ((uint32_t) (RTC_TAMPER_1 | \ - RTC_TAMPER_2)) - -#define RTC_TAMPER_FLAGS_MASK ((uint32_t) (RTC_FLAG_TAMP1F | \ - RTC_FLAG_TAMP2F)) -#else /* RTC_TAMPER2_SUPPORT */ -#define RTC_TAMPER_ENABLE_BITS_MASK RTC_TAMPER_1 - -#define RTC_TAMPER_FLAGS_MASK RTC_FLAG_TAMP1F -#endif /* RTC_TAMPER2_SUPPORT */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ - -/** @defgroup RTCEx_Private_Macros RTCEx Private Macros - * @{ - */ - -/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters - * @{ - */ -#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER) - -#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ - ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) - -#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)~RTC_TAMPER_ENABLE_BITS_MASK)) == 0x00U) && ((TAMPER) != 0U)) - -#if defined(RTC_AF2_SUPPORT) -#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \ - ((PIN) == RTC_TAMPERPIN_POS1)) -#else /* RTC_AF2_SUPPORT */ -#define IS_RTC_TAMPER_PIN(PIN) ((PIN) == RTC_TAMPERPIN_DEFAULT) -#endif /* RTC_AF2_SUPPORT */ - -#if defined(RTC_AF2_SUPPORT) -#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \ - ((PIN) == RTC_TIMESTAMPPIN_POS1)) -#else /* RTC_AF2_SUPPORT */ -#define IS_RTC_TIMESTAMP_PIN(PIN) ((PIN) == RTC_TIMESTAMPPIN_DEFAULT) -#endif /* RTC_AF2_SUPPORT */ - -#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ - ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ - ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ - ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) - -#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ - ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ - ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ - ((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) - -#define IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(FILTER, TRIGGER) \ - ( ( ((FILTER) != RTC_TAMPERFILTER_DISABLE) \ - && ( ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) \ - || ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))) \ - || ( ((FILTER) == RTC_TAMPERFILTER_DISABLE) \ - && ( ((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) \ - || ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE)))) - -#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) - -#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ - ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ - ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ - ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) - -#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ - ((STATE) == RTC_TAMPER_PULLUP_DISABLE)) - -#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ - ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) - -#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) - -#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) - -#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \ - ((SIGN) == RTC_CALIBSIGN_NEGATIVE)) - -#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U) - -#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ - ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ - ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) - -#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ - ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) - -#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) - -#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ - ((SEL) == RTC_SHIFTADD1S_SET)) - -#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) - -#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ - ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_RTC_EX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h deleted file mode 100644 index 6c23f93..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h +++ /dev/null @@ -1,895 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sai.h - * @author MCD Application Team - * @brief Header file of SAI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SAI_H -#define __STM32F4xx_HAL_SAI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || \ - defined(STM32F423xx) - -/** @addtogroup SAI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SAI_Exported_Types SAI Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_SAI_STATE_RESET = 0x00U, /*!< SAI not yet initialized or disabled */ - HAL_SAI_STATE_READY = 0x01U, /*!< SAI initialized and ready for use */ - HAL_SAI_STATE_BUSY = 0x02U, /*!< SAI internal process is ongoing */ - HAL_SAI_STATE_BUSY_TX = 0x12U, /*!< Data transmission process is ongoing */ - HAL_SAI_STATE_BUSY_RX = 0x22U, /*!< Data reception process is ongoing */ - HAL_SAI_STATE_TIMEOUT = 0x03U, /*!< SAI timeout state */ - HAL_SAI_STATE_ERROR = 0x04U /*!< SAI error state */ -} HAL_SAI_StateTypeDef; - -/** - * @brief SAI Callback prototype - */ -typedef void (*SAIcallback)(void); - -/** @defgroup SAI_Init_Structure_definition SAI Init Structure definition - * @brief SAI Init Structure definition - * @{ - */ -typedef struct -{ - uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode. - This parameter can be a value of @ref SAI_Block_Mode */ - - uint32_t Synchro; /*!< Specifies SAI Block synchronization - This parameter can be a value of @ref SAI_Block_Synchronization */ - - uint32_t SynchroExt; /*!< Specifies SAI external output synchronization, this setup is common - for BlockA and BlockB - This parameter can be a value of @ref SAI_Block_SyncExt - @note: If both audio blocks of same SAI are used, this parameter has - to be set to the same value for each audio block */ - - uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven. - This parameter can be a value of @ref SAI_Block_Output_Drive - @note this value has to be set before enabling the audio block - but after the audio block configuration. */ - - uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not. - This parameter can be a value of @ref SAI_Block_NoDivider - @note If bit NODIV in the SAI_xCR1 register is cleared, the frame length - should be aligned to a number equal to a power of 2, from 8 to 256. - If bit NODIV in the SAI_xCR1 register is set, the frame length can - take any of the values without constraint since the input clock of - the audio block should be equal to the bit clock. - There is no MCLK_x clock which can be output. */ - - uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold. - This parameter can be a value of @ref SAI_Block_Fifo_Threshold */ - - uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source. - This parameter is not used for STM32F446xx devices. */ - - uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling. - This parameter can be a value of @ref SAI_Audio_Frequency */ - - uint32_t Mckdiv; /*!< Specifies the master clock divider. - This parameter must be a number between Min_Data = 0 and Max_Data = 15. - @note This parameter is used only if AudioFrequency is set to - SAI_AUDIO_FREQUENCY_MCKDIV otherwise it is internally computed. */ - - uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected. - This parameter can be a value of @ref SAI_Mono_Stereo_Mode */ - - uint32_t CompandingMode; /*!< Specifies the companding mode type. - This parameter can be a value of @ref SAI_Block_Companding_Mode */ - - uint32_t TriState; /*!< Specifies the companding mode type. - This parameter can be a value of @ref SAI_TRIState_Management */ - - /* This part of the structure is automatically filled if your are using the high level initialisation - function HAL_SAI_InitProtocol */ - - uint32_t Protocol; /*!< Specifies the SAI Block protocol. - This parameter can be a value of @ref SAI_Block_Protocol */ - - uint32_t DataSize; /*!< Specifies the SAI Block data size. - This parameter can be a value of @ref SAI_Block_Data_Size */ - - uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */ - - uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity. - This parameter can be a value of @ref SAI_Block_Clock_Strobing */ -} SAI_InitTypeDef; -/** - * @} - */ - -/** @defgroup SAI_Frame_Structure_definition SAI Frame Structure definition - * @brief SAI Frame Init structure definition - * @note For SPDIF and AC97 protocol, these parameters are not used (set by hardware). - * @{ - */ -typedef struct -{ - uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame. - This parameter must be a number between Min_Data = 8 and Max_Data = 256. - @note If master clock MCLK_x pin is declared as an output, the frame length - should be aligned to a number equal to power of 2 in order to keep - in an audio frame, an integer number of MCLK pulses by bit Clock. */ - - uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length. - This Parameter specifies the length in number of bit clock (SCK + 1) - of the active level of FS signal in audio frame. - This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ - - uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition. - This parameter can be a value of @ref SAI_Block_FS_Definition */ - - uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity. - This parameter can be a value of @ref SAI_Block_FS_Polarity */ - - uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset. - This parameter can be a value of @ref SAI_Block_FS_Offset */ -} SAI_FrameInitTypeDef; -/** - * @} - */ - -/** @defgroup SAI_Slot_Structure_definition SAI Slot Structure definition - * @brief SAI Block Slot Init Structure definition - * @note For SPDIF protocol, these parameters are not used (set by hardware). - * @note For AC97 protocol, only SlotActive parameter is used (the others are set by hardware). - * @{ - */ -typedef struct -{ - uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot. - This parameter must be a number between Min_Data = 0 and Max_Data = 24 */ - - uint32_t SlotSize; /*!< Specifies the Slot Size. - This parameter can be a value of @ref SAI_Block_Slot_Size */ - - uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ - - uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated. - This parameter can be a value of @ref SAI_Block_Slot_Active */ -} SAI_SlotInitTypeDef; -/** - * @} - */ - -/** @defgroup SAI_Handle_Structure_definition SAI Handle Structure definition - * @brief SAI handle Structure definition - * @{ - */ -typedef struct __SAI_HandleTypeDef -{ - SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */ - - SAI_InitTypeDef Init; /*!< SAI communication parameters */ - - SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */ - - SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */ - - uint16_t XferSize; /*!< SAI transfer size */ - - uint16_t XferCount; /*!< SAI transfer counter */ - - DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */ - - SAIcallback mutecallback;/*!< SAI mute callback */ - - void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */ - - HAL_LockTypeDef Lock; /*!< SAI locking object */ - - __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */ - - __IO uint32_t ErrorCode; /*!< SAI Error code */ - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - void (*RxCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI receive complete callback */ - void (*RxHalfCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI receive half complete callback */ - void (*TxCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI transmit complete callback */ - void (*TxHalfCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI transmit half complete callback */ - void (*ErrorCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI error callback */ - void (*MspInitCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI MSP init callback */ - void (*MspDeInitCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI MSP de-init callback */ -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} SAI_HandleTypeDef; -/** - * @} - */ - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) -/** - * @brief SAI callback ID enumeration definition - */ -typedef enum -{ - HAL_SAI_RX_COMPLETE_CB_ID = 0x00U, /*!< SAI receive complete callback ID */ - HAL_SAI_RX_HALFCOMPLETE_CB_ID = 0x01U, /*!< SAI receive half complete callback ID */ - HAL_SAI_TX_COMPLETE_CB_ID = 0x02U, /*!< SAI transmit complete callback ID */ - HAL_SAI_TX_HALFCOMPLETE_CB_ID = 0x03U, /*!< SAI transmit half complete callback ID */ - HAL_SAI_ERROR_CB_ID = 0x04U, /*!< SAI error callback ID */ - HAL_SAI_MSPINIT_CB_ID = 0x05U, /*!< SAI MSP init callback ID */ - HAL_SAI_MSPDEINIT_CB_ID = 0x06U /*!< SAI MSP de-init callback ID */ -} HAL_SAI_CallbackIDTypeDef; - -/** - * @brief SAI callback pointer definition - */ -typedef void (*pSAI_CallbackTypeDef)(SAI_HandleTypeDef *hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SAI_Exported_Constants SAI Exported Constants - * @{ - */ - -/** @defgroup SAI_Error_Code SAI Error Code - * @{ - */ -#define HAL_SAI_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_SAI_ERROR_OVR 0x00000001U /*!< Overrun Error */ -#define HAL_SAI_ERROR_UDR 0x00000002U /*!< Underrun error */ -#define HAL_SAI_ERROR_AFSDET 0x00000004U /*!< Anticipated Frame synchronisation detection */ -#define HAL_SAI_ERROR_LFSDET 0x00000008U /*!< Late Frame synchronisation detection */ -#define HAL_SAI_ERROR_CNREADY 0x00000010U /*!< codec not ready */ -#define HAL_SAI_ERROR_WCKCFG 0x00000020U /*!< Wrong clock configuration */ -#define HAL_SAI_ERROR_TIMEOUT 0x00000040U /*!< Timeout error */ -#define HAL_SAI_ERROR_DMA 0x00000080U /*!< DMA error */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) -#define HAL_SAI_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid callback error */ -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SAI_Block_SyncExt SAI External synchronisation - * @{ - */ -#define SAI_SYNCEXT_DISABLE 0U -#define SAI_SYNCEXT_OUTBLOCKA_ENABLE 1U -#define SAI_SYNCEXT_OUTBLOCKB_ENABLE 2U -/** - * @} - */ - -/** @defgroup SAI_Protocol SAI Supported protocol - * @{ - */ -#define SAI_I2S_STANDARD 0U -#define SAI_I2S_MSBJUSTIFIED 1U -#define SAI_I2S_LSBJUSTIFIED 2U -#define SAI_PCM_LONG 3U -#define SAI_PCM_SHORT 4U -/** - * @} - */ - -/** @defgroup SAI_Protocol_DataSize SAI protocol data size - * @{ - */ -#define SAI_PROTOCOL_DATASIZE_16BIT 0U -#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED 1U -#define SAI_PROTOCOL_DATASIZE_24BIT 2U -#define SAI_PROTOCOL_DATASIZE_32BIT 3U -/** - * @} - */ - -/** @defgroup SAI_Audio_Frequency SAI Audio Frequency - * @{ - */ -#define SAI_AUDIO_FREQUENCY_192K 192000U -#define SAI_AUDIO_FREQUENCY_96K 96000U -#define SAI_AUDIO_FREQUENCY_48K 48000U -#define SAI_AUDIO_FREQUENCY_44K 44100U -#define SAI_AUDIO_FREQUENCY_32K 32000U -#define SAI_AUDIO_FREQUENCY_22K 22050U -#define SAI_AUDIO_FREQUENCY_16K 16000U -#define SAI_AUDIO_FREQUENCY_11K 11025U -#define SAI_AUDIO_FREQUENCY_8K 8000U -#define SAI_AUDIO_FREQUENCY_MCKDIV 0U -/** - * @} - */ - -/** @defgroup SAI_Block_Mode SAI Block Mode - * @{ - */ -#define SAI_MODEMASTER_TX 0x00000000U -#define SAI_MODEMASTER_RX ((uint32_t)SAI_xCR1_MODE_0) -#define SAI_MODESLAVE_TX ((uint32_t)SAI_xCR1_MODE_1) -#define SAI_MODESLAVE_RX ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0)) -/** - * @} - */ - -/** @defgroup SAI_Block_Protocol SAI Block Protocol - * @{ - */ -#define SAI_FREE_PROTOCOL 0x00000000U -#define SAI_SPDIF_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_0) -#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1) -/** - * @} - */ - -/** @defgroup SAI_Block_Data_Size SAI Block Data Size - * @{ - */ -#define SAI_DATASIZE_8 ((uint32_t)SAI_xCR1_DS_1) -#define SAI_DATASIZE_10 ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0)) -#define SAI_DATASIZE_16 ((uint32_t)SAI_xCR1_DS_2) -#define SAI_DATASIZE_20 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0)) -#define SAI_DATASIZE_24 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1)) -#define SAI_DATASIZE_32 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0)) -/** - * @} - */ - -/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission - * @{ - */ -#define SAI_FIRSTBIT_MSB 0x00000000U -#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST) -/** - * @} - */ - -/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing - * @{ - */ -#define SAI_CLOCKSTROBING_FALLINGEDGE 0U -#define SAI_CLOCKSTROBING_RISINGEDGE 1U -/** - * @} - */ - -/** @defgroup SAI_Block_Synchronization SAI Block Synchronization - * @{ - */ -#define SAI_ASYNCHRONOUS 0U /*!< Asynchronous */ -#define SAI_SYNCHRONOUS 1U /*!< Synchronous with other block of same SAI */ -#define SAI_SYNCHRONOUS_EXT_SAI1 2U /*!< Synchronous with other SAI, SAI1 */ -#define SAI_SYNCHRONOUS_EXT_SAI2 3U /*!< Synchronous with other SAI, SAI2 */ -/** - * @} - */ - -/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive - * @{ - */ -#define SAI_OUTPUTDRIVE_DISABLE 0x00000000U -#define SAI_OUTPUTDRIVE_ENABLE ((uint32_t)SAI_xCR1_OUTDRIV) -/** - * @} - */ - -/** @defgroup SAI_Block_NoDivider SAI Block NoDivider - * @{ - */ -#define SAI_MASTERDIVIDER_ENABLE 0x00000000U -#define SAI_MASTERDIVIDER_DISABLE ((uint32_t)SAI_xCR1_NODIV) -/** - * @} - */ - -/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition - * @{ - */ -#define SAI_FS_STARTFRAME 0x00000000U -#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF) -/** - * @} - */ - -/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity - * @{ - */ -#define SAI_FS_ACTIVE_LOW 0x00000000U -#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPOL) -/** - * @} - */ - -/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset - * @{ - */ -#define SAI_FS_FIRSTBIT 0x00000000U -#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF) -/** - * @} - */ - -/** @defgroup SAI_Block_Slot_Size SAI Block Slot Size - * @{ - */ -#define SAI_SLOTSIZE_DATASIZE 0x00000000U -#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0) -#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1) -/** - * @} - */ - -/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active - * @{ - */ -#define SAI_SLOT_NOTACTIVE 0x00000000U -#define SAI_SLOTACTIVE_0 0x00000001U -#define SAI_SLOTACTIVE_1 0x00000002U -#define SAI_SLOTACTIVE_2 0x00000004U -#define SAI_SLOTACTIVE_3 0x00000008U -#define SAI_SLOTACTIVE_4 0x00000010U -#define SAI_SLOTACTIVE_5 0x00000020U -#define SAI_SLOTACTIVE_6 0x00000040U -#define SAI_SLOTACTIVE_7 0x00000080U -#define SAI_SLOTACTIVE_8 0x00000100U -#define SAI_SLOTACTIVE_9 0x00000200U -#define SAI_SLOTACTIVE_10 0x00000400U -#define SAI_SLOTACTIVE_11 0x00000800U -#define SAI_SLOTACTIVE_12 0x00001000U -#define SAI_SLOTACTIVE_13 0x00002000U -#define SAI_SLOTACTIVE_14 0x00004000U -#define SAI_SLOTACTIVE_15 0x00008000U -#define SAI_SLOTACTIVE_ALL 0x0000FFFFU -/** - * @} - */ - -/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode - * @{ - */ -#define SAI_STEREOMODE 0x00000000U -#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO) -/** - * @} - */ - -/** @defgroup SAI_TRIState_Management SAI TRIState Management - * @{ - */ -#define SAI_OUTPUT_NOTRELEASED 0x00000000U -#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS) -/** - * @} - */ - -/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold - * @{ - */ -#define SAI_FIFOTHRESHOLD_EMPTY 0x00000000U -#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)(SAI_xCR2_FTH_0)) -#define SAI_FIFOTHRESHOLD_HF ((uint32_t)(SAI_xCR2_FTH_1)) -#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0)) -#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)(SAI_xCR2_FTH_2)) -/** - * @} - */ - -/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode - * @{ - */ -#define SAI_NOCOMPANDING 0x00000000U -#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1)) -#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0)) -#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL)) -#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL)) -/** - * @} - */ - -/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value - * @{ - */ -#define SAI_ZERO_VALUE 0x00000000U -#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL) -/** - * @} - */ - -/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition - * @{ - */ -#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE) -#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE) -#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE) -#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE) -#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE) -#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE) -#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE) -/** - * @} - */ - -/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition - * @{ - */ -#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR) -#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET) -#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG) -#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ) -#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY) -#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET) -#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET) -/** - * @} - */ - -/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level - * @{ - */ -#define SAI_FIFOSTATUS_EMPTY 0x00000000U -#define SAI_FIFOSTATUS_LESS1QUARTERFULL 0x00010000U -#define SAI_FIFOSTATUS_1QUARTERFULL 0x00020000U -#define SAI_FIFOSTATUS_HALFFULL 0x00030000U -#define SAI_FIFOSTATUS_3QUARTERFULL 0x00040000U -#define SAI_FIFOSTATUS_FULL 0x00050000U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SAI_Exported_Macros SAI Exported Macros - * @brief macros to handle interrupts and specific configurations - * @{ - */ - -/** @brief Reset SAI handle state - * @param __HANDLE__ specifies the SAI Handle. - * @retval None - */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) -#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_SAI_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET) -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - -/** @brief Enable or disable the specified SAI interrupts. - * @param __HANDLE__ specifies the SAI Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable - * @arg SAI_IT_MUTEDET: Mute detection interrupt enable - * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable - * @arg SAI_IT_FREQ: FIFO request interrupt enable - * @arg SAI_IT_CNRDY: Codec not ready interrupt enable - * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable - * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable - * @retval None - */ -#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) -#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__))) - -/** @brief Check if the specified SAI interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the SAI Handle. - * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral. - * @param __INTERRUPT__ specifies the SAI interrupt source to check. - * This parameter can be one of the following values: - * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable - * @arg SAI_IT_MUTEDET: Mute detection interrupt enable - * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable - * @arg SAI_IT_FREQ: FIFO request interrupt enable - * @arg SAI_IT_CNRDY: Codec not ready interrupt enable - * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable - * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified SAI flag is set or not. - * @param __HANDLE__ specifies the SAI Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SAI_FLAG_OVRUDR: Overrun underrun flag. - * @arg SAI_FLAG_MUTEDET: Mute detection flag. - * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag. - * @arg SAI_FLAG_FREQ: FIFO request flag. - * @arg SAI_FLAG_CNRDY: Codec not ready flag. - * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag. - * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified SAI pending flag. - * @param __HANDLE__ specifies the SAI Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun - * @arg SAI_FLAG_MUTEDET: Clear Mute detection - * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration - * @arg SAI_FLAG_FREQ: Clear FIFO request - * @arg SAI_FLAG_CNRDY: Clear Codec not ready - * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection - * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection - * @retval None - */ -#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__)) - -/** @brief Enable SAI - * @param __HANDLE__ specifies the SAI Handle. - * @retval None - */ -#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN) - -/** @brief Disable SAI - * @param __HANDLE__ specifies the SAI Handle. - * @retval None - */ -#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN) - -/** - * @} - */ - -/* Include HAL SAI Extension module */ -#include "stm32f4xx_hal_sai_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SAI_Exported_Functions - * @{ - */ - -/* Initialization/de-initialization functions **********************************/ -/** @addtogroup SAI_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); -HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai); -void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai); -void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai); - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) -/* SAI callbacks register/unregister functions ********************************/ -HAL_StatusTypeDef HAL_SAI_RegisterCallback(SAI_HandleTypeDef *hsai, - HAL_SAI_CallbackIDTypeDef CallbackID, - pSAI_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SAI_UnRegisterCallback(SAI_HandleTypeDef *hsai, - HAL_SAI_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* I/O operation functions *****************************************************/ -/** @addtogroup SAI_Exported_Functions_Group2 - * @{ - */ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai); - -/* Abort function */ -HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai); - -/* Mute management */ -HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val); -HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter); -HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai); - -/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai); -void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai); -/** - * @} - */ - -/** @addtogroup SAI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai); -uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai); -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup SAI_Private_Macros - * @{ - */ -#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\ - ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\ - ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE)) - -#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\ - ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\ - ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\ - ((PROTOCOL) == SAI_PCM_LONG) ||\ - ((PROTOCOL) == SAI_PCM_SHORT)) - -#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\ - ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\ - ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\ - ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT)) - -#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV)) - -#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \ - ((MODE) == SAI_MODEMASTER_RX) || \ - ((MODE) == SAI_MODESLAVE_TX) || \ - ((MODE) == SAI_MODESLAVE_RX)) - -#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \ - ((PROTOCOL) == SAI_AC97_PROTOCOL) || \ - ((PROTOCOL) == SAI_SPDIF_PROTOCOL)) - -#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \ - ((DATASIZE) == SAI_DATASIZE_10) || \ - ((DATASIZE) == SAI_DATASIZE_16) || \ - ((DATASIZE) == SAI_DATASIZE_20) || \ - ((DATASIZE) == SAI_DATASIZE_24) || \ - ((DATASIZE) == SAI_DATASIZE_32)) - -#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \ - ((BIT) == SAI_FIRSTBIT_LSB)) - -#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \ - ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE)) - -#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \ - ((SYNCHRO) == SAI_SYNCHRONOUS) || \ - ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) ||\ - ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2)) - -#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \ - ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE)) - -#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \ - ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE)) - -#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63U) - -#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \ - ((VALUE) == SAI_LAST_SENT_VALUE)) - -#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \ - ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \ - ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \ - ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \ - ((MODE) == SAI_ALAW_2CPL_COMPANDING)) - -#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL)) - -#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\ - ((STATE) == SAI_OUTPUT_RELEASED)) - -#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\ - ((MODE) == SAI_STEREOMODE)) - -#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) <= SAI_SLOTACTIVE_ALL) - -#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1U <= (NUMBER)) && ((NUMBER) <= 16U)) - -#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \ - ((SIZE) == SAI_SLOTSIZE_16B) || \ - ((SIZE) == SAI_SLOTSIZE_32B)) - -#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24U) - -#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \ - ((OFFSET) == SAI_FS_BEFOREFIRSTBIT)) - -#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \ - ((POLARITY) == SAI_FS_ACTIVE_HIGH)) - -#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \ - ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION)) - -#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15U) - -#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8U <= (LENGTH)) && ((LENGTH) <= 256U)) - -#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1U <= (LENGTH)) && ((LENGTH) <= 128U)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SAI_Private_Functions SAI Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SAI_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h deleted file mode 100644 index c6fdd56..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h +++ /dev/null @@ -1,114 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sai_ex.h - * @author MCD Application Team - * @brief Header file of SAI Extension HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SAI_EX_H -#define __STM32F4xx_HAL_SAI_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SAIEx - * @{ - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || \ - defined(STM32F423xx) - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SAI_Clock_Source SAI Clock Source - * @{ - */ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define SAI_CLKSOURCE_PLLI2S 0x00000000U -#define SAI_CLKSOURCE_EXT 0x00100000U -#define SAI_CLKSOURCE_PLLR 0x00200000U -#define SAI_CLKSOURCE_HS 0x00300000U -#else -#define SAI_CLKSOURCE_PLLSAI 0x00000000U -#define SAI_CLKSOURCE_PLLI2S 0x00100000U -#define SAI_CLKSOURCE_EXT 0x00200000U -#define SAI_CLKSOURCE_NA 0x00400000U /*!< No applicable for STM32F446xx */ -#endif - - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SAIEx_Exported_Functions - * @{ - */ - -/** @addtogroup SAIEx_Exported_Functions_Group1 - * @{ - */ - -/* Extended features functions ************************************************/ -void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai); -uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == SAI_CLKSOURCE_EXT)||\ - ((SOURCE) == SAI_CLKSOURCE_PLLR)||\ - ((SOURCE) == SAI_CLKSOURCE_HS)) -#else -#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == SAI_CLKSOURCE_EXT)||\ - ((SOURCE) == SAI_CLKSOURCE_PLLI2S)||\ - ((SOURCE) == SAI_CLKSOURCE_NA)) -#endif -/* Private functions ---------------------------------------------------------*/ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SAI_EX_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h deleted file mode 100644 index 3d450a0..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h +++ /dev/null @@ -1,238 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sdram.h - * @author MCD Application Team - * @brief Header file of SDRAM HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_SDRAM_H -#define STM32F4xx_HAL_SDRAM_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(FMC_Bank5_6) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_fmc.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SDRAM - * @{ - */ - -/* Exported typedef ----------------------------------------------------------*/ - -/** @defgroup SDRAM_Exported_Types SDRAM Exported Types - * @{ - */ - -/** - * @brief HAL SDRAM State structure definition - */ -typedef enum -{ - HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */ - HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */ - HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */ - HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */ - HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */ - HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */ - -} HAL_SDRAM_StateTypeDef; - -/** - * @brief SDRAM handle Structure definition - */ -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) -typedef struct __SDRAM_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -{ - FMC_SDRAM_TypeDef *Instance; /*!< Register base address */ - - FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */ - - __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */ - - HAL_LockTypeDef Lock; /*!< SDRAM locking object */ - - DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - void (* MspInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp Init callback */ - void (* MspDeInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp DeInit callback */ - void (* RefreshErrorCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Refresh Error callback */ - void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SDRAM DMA Xfer Complete callback */ - void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SDRAM DMA Xfer Error callback */ -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -} SDRAM_HandleTypeDef; - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) -/** - * @brief HAL SDRAM Callback ID enumeration definition - */ -typedef enum -{ - HAL_SDRAM_MSP_INIT_CB_ID = 0x00U, /*!< SDRAM MspInit Callback ID */ - HAL_SDRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SDRAM MspDeInit Callback ID */ - HAL_SDRAM_REFRESH_ERR_CB_ID = 0x02U, /*!< SDRAM Refresh Error Callback ID */ - HAL_SDRAM_DMA_XFER_CPLT_CB_ID = 0x03U, /*!< SDRAM DMA Xfer Complete Callback ID */ - HAL_SDRAM_DMA_XFER_ERR_CB_ID = 0x04U /*!< SDRAM DMA Xfer Error Callback ID */ -} HAL_SDRAM_CallbackIDTypeDef; - -/** - * @brief HAL SDRAM Callback pointer definition - */ -typedef void (*pSDRAM_CallbackTypeDef)(SDRAM_HandleTypeDef *hsdram); -typedef void (*pSDRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros - * @{ - */ - -/** @brief Reset SDRAM handle state - * @param __HANDLE__ specifies the SDRAM handle. - * @retval None - */ -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) -#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_SDRAM_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET) -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions - * @{ - */ - -/** @addtogroup SDRAM_Exported_Functions_Group1 - * @{ - */ - -/* Initialization/de-initialization functions *********************************/ -HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing); -HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram); - -void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); -void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/** @addtogroup SDRAM_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ****************************************************/ -HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, - uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, - uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, - uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, - uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, - uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, - uint32_t BufferSize); - -HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, - uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, - uint32_t BufferSize); - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) -/* SDRAM callback registering/unregistering */ -HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, - pSDRAM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId); -HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, - pSDRAM_DmaCallbackTypeDef pCallback); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup SDRAM_Exported_Functions_Group3 - * @{ - */ -/* SDRAM Control functions *****************************************************/ -HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram); -HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram); -HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, - uint32_t Timeout); -HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate); -HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber); -uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram); - -/** - * @} - */ - -/** @addtogroup SDRAM_Exported_Functions_Group4 - * @{ - */ -/* SDRAM State functions ********************************************************/ -HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMC_Bank5_6 */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_SDRAM_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smbus.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smbus.h deleted file mode 100644 index ea92afa..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smbus.h +++ /dev/null @@ -1,731 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_smbus.h - * @author MCD Application Team - * @brief Header file of SMBUS HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SMBUS_H -#define __STM32F4xx_HAL_SMBUS_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SMBUS - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SMBUS_Exported_Types SMBUS Exported Types - * @{ - */ - -/** - * @brief SMBUS Configuration Structure definition - */ -typedef struct -{ - uint32_t ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 100kHz */ - - uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. - This parameter can be a value of @ref SMBUS_Analog_Filter */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref SMBUS_addressing_mode */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref SMBUS_dual_addressing_mode */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is - selected. This parameter can be a 7-bit address. */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref SMBUS_general_call_addressing_mode */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref SMBUS_nostretch_mode */ - - uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. - This parameter can be a value of @ref SMBUS_packet_error_check_mode */ - - uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. - This parameter can be a value of @ref SMBUS_peripheral_mode */ - -} SMBUS_InitTypeDef; - -/** - * @brief HAL State structure definition - * @note HAL SMBUS State value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : Abort (Abort user request on going) - * 10 : Timeout - * 11 : Error - * b5 IP initialisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP initialized and ready to use. HAL SMBUS Init function called) - * b4 (not used) - * x : Should be set to 0 - * b3 - * 0 : Ready or Busy (No Listen mode ongoing) - * 1 : Listen (IP in Address Listen Mode) - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (IP busy with some configuration or internal operations) - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - */ -typedef enum -{ - - HAL_SMBUS_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ - HAL_SMBUS_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ - HAL_SMBUS_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ - HAL_SMBUS_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ - HAL_SMBUS_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ - HAL_SMBUS_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ - HAL_SMBUS_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission - process is ongoing */ - HAL_SMBUS_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception - process is ongoing */ - HAL_SMBUS_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_SMBUS_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_SMBUS_STATE_ERROR = 0xE0U /*!< Error */ -} HAL_SMBUS_StateTypeDef; - -/** - * @brief HAL Mode structure definition - * @note HAL SMBUS Mode value coding follow below described bitmap : - * b7 (not used) - * x : Should be set to 0 - * b6 (not used) - * x : Should be set to 0 - * b5 - * 0 : None - * 1 : Slave (HAL SMBUS communication is in Slave/Device Mode) - * b4 - * 0 : None - * 1 : Master (HAL SMBUS communication is in Master/Host Mode) - * b3-b2-b1-b0 (not used) - * xxxx : Should be set to 0000 - */ -typedef enum -{ - HAL_SMBUS_MODE_NONE = 0x00U, /*!< No SMBUS communication on going */ - HAL_SMBUS_MODE_MASTER = 0x10U, /*!< SMBUS communication is in Master Mode */ - HAL_SMBUS_MODE_SLAVE = 0x20U, /*!< SMBUS communication is in Slave Mode */ - -} HAL_SMBUS_ModeTypeDef; - -/** - * @brief SMBUS handle Structure definition - */ -typedef struct __SMBUS_HandleTypeDef -{ - I2C_TypeDef *Instance; /*!< SMBUS registers base address */ - - SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */ - - uint16_t XferSize; /*!< SMBUS transfer size */ - - __IO uint16_t XferCount; /*!< SMBUS transfer counter */ - - __IO uint32_t XferOptions; /*!< SMBUS transfer options this parameter can - be a value of @ref SMBUS_OPTIONS */ - - __IO uint32_t PreviousState; /*!< SMBUS communication Previous state and mode - context for internal usage */ - - HAL_LockTypeDef Lock; /*!< SMBUS locking object */ - - __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */ - - __IO HAL_SMBUS_ModeTypeDef Mode; /*!< SMBUS communication mode */ - - __IO uint32_t ErrorCode; /*!< SMBUS Error code */ - - __IO uint32_t Devaddress; /*!< SMBUS Target device address */ - - __IO uint32_t EventCount; /*!< SMBUS Event counter */ - - uint8_t XferPEC; /*!< SMBUS PEC data in reception mode */ - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Listen Complete callback */ - void (* MemTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Memory Tx Transfer completed callback */ - void (* MemRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Memory Rx Transfer completed callback */ - void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Error callback */ - void (* AbortCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Abort callback */ - void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< SMBUS Slave Address Match callback */ - void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp Init callback */ - void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp DeInit callback */ - -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ -} SMBUS_HandleTypeDef; - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) -/** - * @brief HAL SMBUS Callback ID enumeration definition - */ -typedef enum -{ - HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */ - HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */ - HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */ - HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */ - HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */ - HAL_SMBUS_ERROR_CB_ID = 0x07U, /*!< SMBUS Error callback ID */ - HAL_SMBUS_ABORT_CB_ID = 0x08U, /*!< SMBUS Abort callback ID */ - HAL_SMBUS_MSPINIT_CB_ID = 0x09U, /*!< SMBUS Msp Init callback ID */ - HAL_SMBUS_MSPDEINIT_CB_ID = 0x0AU /*!< SMBUS Msp DeInit callback ID */ - -} HAL_SMBUS_CallbackIDTypeDef; - -/** - * @brief HAL SMBUS Callback pointer definition - */ -typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an I2C callback function */ -typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ - -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants - * @{ - */ - -/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code - * @brief SMBUS Error Code - * @{ - */ -#define HAL_SMBUS_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_SMBUS_ERROR_BERR 0x00000001U /*!< BERR error */ -#define HAL_SMBUS_ERROR_ARLO 0x00000002U /*!< ARLO error */ -#define HAL_SMBUS_ERROR_AF 0x00000004U /*!< AF error */ -#define HAL_SMBUS_ERROR_OVR 0x00000008U /*!< OVR error */ -#define HAL_SMBUS_ERROR_TIMEOUT 0x00000010U /*!< Timeout Error */ -#define HAL_SMBUS_ERROR_ALERT 0x00000020U /*!< Alert error */ -#define HAL_SMBUS_ERROR_PECERR 0x00000040U /*!< PEC error */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) -#define HAL_SMBUS_ERROR_INVALID_CALLBACK 0x00000080U /*!< Invalid Callback error */ -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter - * @{ - */ -#define SMBUS_ANALOGFILTER_ENABLE 0x00000000U -#define SMBUS_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF -/** - * @} - */ - -/** @defgroup SMBUS_addressing_mode SMBUS addressing mode - * @{ - */ -#define SMBUS_ADDRESSINGMODE_7BIT 0x00004000U -#define SMBUS_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U) -/** - * @} - */ - -/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode - * @{ - */ -#define SMBUS_DUALADDRESS_DISABLE 0x00000000U -#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL -/** - * @} - */ - -/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode - * @{ - */ -#define SMBUS_GENERALCALL_DISABLE 0x00000000U -#define SMBUS_GENERALCALL_ENABLE I2C_CR1_ENGC -/** - * @} - */ - -/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode - * @{ - */ -#define SMBUS_NOSTRETCH_DISABLE 0x00000000U -#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode - * @{ - */ -#define SMBUS_PEC_DISABLE 0x00000000U -#define SMBUS_PEC_ENABLE I2C_CR1_ENPEC -/** - * @} - */ - -/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode -* @{ -*/ -#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP) -#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE I2C_CR1_SMBUS -#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_ENARP) -/** -* @} -*/ - -/** @defgroup SMBUS_XferDirection_definition SMBUS XferDirection definition - * @{ - */ -#define SMBUS_DIRECTION_RECEIVE 0x00000000U -#define SMBUS_DIRECTION_TRANSMIT 0x00000001U -/** - * @} - */ - -/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition - * @{ - */ -#define SMBUS_FIRST_FRAME 0x00000001U -#define SMBUS_NEXT_FRAME 0x00000002U -#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC 0x00000003U -#define SMBUS_LAST_FRAME_NO_PEC 0x00000004U -#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC 0x00000005U -#define SMBUS_LAST_FRAME_WITH_PEC 0x00000006U -/** - * @} - */ - -/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition - * @{ - */ -#define SMBUS_IT_BUF I2C_CR2_ITBUFEN -#define SMBUS_IT_EVT I2C_CR2_ITEVTEN -#define SMBUS_IT_ERR I2C_CR2_ITERREN -/** - * @} - */ - -/** @defgroup SMBUS_Flag_definition SMBUS Flag definition - * @{ - */ -#define SMBUS_FLAG_SMBALERT 0x00018000U -#define SMBUS_FLAG_TIMEOUT 0x00014000U -#define SMBUS_FLAG_PECERR 0x00011000U -#define SMBUS_FLAG_OVR 0x00010800U -#define SMBUS_FLAG_AF 0x00010400U -#define SMBUS_FLAG_ARLO 0x00010200U -#define SMBUS_FLAG_BERR 0x00010100U -#define SMBUS_FLAG_TXE 0x00010080U -#define SMBUS_FLAG_RXNE 0x00010040U -#define SMBUS_FLAG_STOPF 0x00010010U -#define SMBUS_FLAG_ADD10 0x00010008U -#define SMBUS_FLAG_BTF 0x00010004U -#define SMBUS_FLAG_ADDR 0x00010002U -#define SMBUS_FLAG_SB 0x00010001U -#define SMBUS_FLAG_DUALF 0x00100080U -#define SMBUS_FLAG_SMBHOST 0x00100040U -#define SMBUS_FLAG_SMBDEFAULT 0x00100020U -#define SMBUS_FLAG_GENCALL 0x00100010U -#define SMBUS_FLAG_TRA 0x00100004U -#define SMBUS_FLAG_BUSY 0x00100002U -#define SMBUS_FLAG_MSL 0x00100001U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros - * @{ - */ - -/** @brief Reset SMBUS handle state - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @retval None - */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) -#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET) -#endif - -/** @brief Enable or disable the specified SMBUS interrupts. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg SMBUS_IT_BUF: Buffer interrupt enable - * @arg SMBUS_IT_EVT: Event interrupt enable - * @arg SMBUS_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) -#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__))) - -/** @brief Checks if the specified SMBUS interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @param __INTERRUPT__ specifies the SMBUS interrupt source to check. - * This parameter can be one of the following values: - * @arg SMBUS_IT_BUF: Buffer interrupt enable - * @arg SMBUS_IT_EVT: Event interrupt enable - * @arg SMBUS_IT_ERR: Error interrupt enable - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified SMBUS flag is set or not. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SMBUS_FLAG_SMBALERT: SMBus Alert flag - * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg SMBUS_FLAG_PECERR: PEC error in reception flag - * @arg SMBUS_FLAG_OVR: Overrun/Underrun flag - * @arg SMBUS_FLAG_AF: Acknowledge failure flag - * @arg SMBUS_FLAG_ARLO: Arbitration lost flag - * @arg SMBUS_FLAG_BERR: Bus error flag - * @arg SMBUS_FLAG_TXE: Data register empty flag - * @arg SMBUS_FLAG_RXNE: Data register not empty flag - * @arg SMBUS_FLAG_STOPF: Stop detection flag - * @arg SMBUS_FLAG_ADD10: 10-bit header sent flag - * @arg SMBUS_FLAG_BTF: Byte transfer finished flag - * @arg SMBUS_FLAG_ADDR: Address sent flag - * Address matched flag - * @arg SMBUS_FLAG_SB: Start bit flag - * @arg SMBUS_FLAG_DUALF: Dual flag - * @arg SMBUS_FLAG_SMBHOST: SMBus host header - * @arg SMBUS_FLAG_SMBDEFAULT: SMBus default header - * @arg SMBUS_FLAG_GENCALL: General call header flag - * @arg SMBUS_FLAG_TRA: Transmitter/Receiver flag - * @arg SMBUS_FLAG_BUSY: Bus busy flag - * @arg SMBUS_FLAG_MSL: Master/Slave flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)): \ - ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK))) - -/** @brief Clears the SMBUS pending flags which are cleared by writing 0 in a specific bit. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg SMBUS_FLAG_SMBALERT: SMBus Alert flag - * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg SMBUS_FLAG_PECERR: PEC error in reception flag - * @arg SMBUS_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg SMBUS_FLAG_AF: Acknowledge failure flag - * @arg SMBUS_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg SMBUS_FLAG_BERR: Bus error flag - * @retval None - */ -#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & SMBUS_FLAG_MASK)) - -/** @brief Clears the SMBUS ADDR pending flag. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @retval None - */ -#define __HAL_SMBUS_CLEAR_ADDRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg = 0x00U; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - tmpreg = (__HANDLE__)->Instance->SR2; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clears the SMBUS STOPF pending flag. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUS where x: 1, 2, or 3 to select the SMBUS peripheral. - * @retval None - */ -#define __HAL_SMBUS_CLEAR_STOPFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg = 0x00U; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Enable the SMBUS peripheral. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUSx where x: 1 or 2 to select the SMBUS peripheral. - * @retval None - */ -#define __HAL_SMBUS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE) - -/** @brief Disable the SMBUS peripheral. - * @param __HANDLE__ specifies the SMBUS Handle. - * This parameter can be SMBUSx where x: 1 or 2 to select the SMBUS peripheral. - * @retval None - */ -#define __HAL_SMBUS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE) - -/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode. - * @param __HANDLE__ specifies the SMBUS Handle. - * @retval None - */ -#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_ACK)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SMBUS_Exported_Functions - * @{ - */ - -/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus); -HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus); - -/* Callbacks Register/UnRegister functions ************************************/ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -/** @addtogroup Blocking_mode_Polling Blocking mode Polling - * @{ - */ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt - * @{ - */ -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress); -HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions); - -HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus); -HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus); -HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus); -HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus); - -/****** Filter Configuration functions */ -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter); -#endif -/** - * @} - */ - -/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ -void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus); -void HAL_SMBUS_AbortCpltCallback(SMBUS_HandleTypeDef *hsmbus); - -/** - * @} - */ - -/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @{ - */ - -/* Peripheral State, mode and Errors functions **************************************************/ -HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus); -HAL_SMBUS_ModeTypeDef HAL_SMBUS_GetMode(SMBUS_HandleTypeDef *hsmbus); -uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SMBUS_Private_Constants SMBUS Private Constants - * @{ - */ -#define SMBUS_FLAG_MASK 0x0000FFFFU -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SMBUS_Private_Macros SMBUS Private Macros - * @{ - */ - -#define SMBUS_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U) - -#define SMBUS_RISE_TIME(__FREQRANGE__) ( ((__FREQRANGE__) + 1U)) - -#define SMBUS_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U))) - -#define SMBUS_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0))) - -#define SMBUS_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0)) - -#define SMBUS_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF))) - -#define SMBUS_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0))) - -#define SMBUS_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1)))) - -#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ENPEC) - -#define SMBUS_GET_PEC_VALUE(__HANDLE__) ((__HANDLE__)->XferPEC) - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \ - ((FILTER) == SMBUS_ANALOGFILTER_DISABLE)) -#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) -#endif -#define IS_SMBUS_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == SMBUS_ADDRESSINGMODE_7BIT) || \ - ((ADDRESS) == SMBUS_ADDRESSINGMODE_10BIT)) - -#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE)) - -#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \ - ((CALL) == SMBUS_GENERALCALL_ENABLE)) - -#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \ - ((STRETCH) == SMBUS_NOSTRETCH_ENABLE)) - -#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \ - ((PEC) == SMBUS_PEC_ENABLE)) - -#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \ - ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ - ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)) - -#define IS_SMBUS_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 100000U)) - -#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U) - -#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U) - -#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \ - ((REQUEST) == SMBUS_NEXT_FRAME) || \ - ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ - ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \ - ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ - ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC)) - -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup SMBUS_Private_Functions SMBUS Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** -* @} -*/ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_SMBUS_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h deleted file mode 100644 index 7ea04aa..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h +++ /dev/null @@ -1,604 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spdifrx.h - * @author MCD Application Team - * @brief Header file of SPDIFRX HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_SPDIFRX_H -#define STM32F4xx_HAL_SPDIFRX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined(STM32F446xx) -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (SPDIFRX) - -/** @addtogroup SPDIFRX - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types - * @{ - */ - -/** - * @brief SPDIFRX Init structure definition - */ -typedef struct -{ - uint32_t InputSelection; /*!< Specifies the SPDIF input selection. - This parameter can be a value of @ref SPDIFRX_Input_Selection */ - - uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. - This parameter can be a value of @ref SPDIFRX_Max_Retries */ - - uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. - This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ - - uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B. - This parameter can be a value of @ref SPDIFRX_Channel_Selection */ - - uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). - This parameter can be a value of @ref SPDIFRX_Data_Format */ - - uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. - This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ - - uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PT_Mask */ - - uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ - - uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_V_Mask */ - - uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PE_Mask */ -} SPDIFRX_InitTypeDef; - -/** - * @brief SPDIFRX SetDataFormat structure definition - */ -typedef struct -{ - uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). - This parameter can be a value of @ref SPDIFRX_Data_Format */ - - uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. - This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ - - uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PT_Mask */ - - uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ - - uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_V_Mask */ - - uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PE_Mask */ - -} SPDIFRX_SetDataFormatTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */ - HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */ - HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */ - HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */ - HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */ - HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */ -} HAL_SPDIFRX_StateTypeDef; - -/** - * @brief SPDIFRX handle Structure definition - */ -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) -typedef struct __SPDIFRX_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -{ - SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ - - SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ - - uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ - - uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ - - __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ - - __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter - (This field is initialized at the - same value as transfer size at the - beginning of the transfer and - decremented when a sample is received. - NbSamplesReceived = RxBufferSize-RxBufferCount) */ - - __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ - - __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter - (This field is initialized at the - same value as transfer size at the - beginning of the transfer and - decremented when a sample is received. - NbSamplesReceived = RxBufferSize-RxBufferCount) */ - - DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */ - - DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ - - __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ - - __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ - - __IO uint32_t ErrorCode; /* SPDIFRX Error code */ - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - void (*RxHalfCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Data flow half completed callback */ - void (*RxCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Data flow completed callback */ - void (*CxHalfCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Control flow half completed callback */ - void (*CxCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Control flow completed callback */ - void (*ErrorCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX error callback */ - void (* MspInitCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Msp Init callback */ - void (* MspDeInitCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Msp DeInit callback */ -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - -} SPDIFRX_HandleTypeDef; -/** - * @} - */ - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) -/** - * @brief HAL SPDIFRX Callback ID enumeration definition - */ -typedef enum -{ - HAL_SPDIFRX_RX_HALF_CB_ID = 0x00U, /*!< SPDIFRX Data flow half completed callback ID */ - HAL_SPDIFRX_RX_CPLT_CB_ID = 0x01U, /*!< SPDIFRX Data flow completed callback */ - HAL_SPDIFRX_CX_HALF_CB_ID = 0x02U, /*!< SPDIFRX Control flow half completed callback */ - HAL_SPDIFRX_CX_CPLT_CB_ID = 0x03U, /*!< SPDIFRX Control flow completed callback */ - HAL_SPDIFRX_ERROR_CB_ID = 0x04U, /*!< SPDIFRX error callback */ - HAL_SPDIFRX_MSPINIT_CB_ID = 0x05U, /*!< SPDIFRX Msp Init callback ID */ - HAL_SPDIFRX_MSPDEINIT_CB_ID = 0x06U /*!< SPDIFRX Msp DeInit callback ID */ -} HAL_SPDIFRX_CallbackIDTypeDef; - -/** - * @brief HAL SPDIFRX Callback pointer definition - */ -typedef void (*pSPDIFRX_CallbackTypeDef)(SPDIFRX_HandleTypeDef *hspdif); /*!< pointer to an SPDIFRX callback function */ -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants - * @{ - */ -/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code - * @{ - */ -#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ -#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ -#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002U) /*!< OVR error */ -#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004U) /*!< Parity error */ -#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008U) /*!< DMA transfer error */ -#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010U) /*!< Unknown Error error */ -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) -#define HAL_SPDIFRX_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection - * @{ - */ -#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000U) -#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000U) -#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000U) -#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000U) -/** - * @} - */ - -/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries - * @{ - */ -#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000U) -#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000U) -#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000U) -#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000U) -/** - * @} - */ - -/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity - * @{ - */ -#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000U) -#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) -/** - * @} - */ - -/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask - * @{ - */ -#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000U) -#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) -/** - * @} - */ - -/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask - * @{ - */ -#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000U) /* The channel status and user bits are copied into the SPDIF_DR */ -#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/ -/** - * @} - */ - -/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask - * @{ - */ -#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000U) -#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) -/** - * @} - */ - -/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask - * @{ - */ -#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000U) -#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) -/** - * @} - */ - -/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection - * @{ - */ -#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000U) -#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) -/** - * @} - */ - -/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format - * @{ - */ -#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000U) -#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010U) -#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020U) -/** - * @} - */ - -/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode - * @{ - */ -#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000U) -#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) -/** - * @} - */ - -/** @defgroup SPDIFRX_State SPDIFRX State - * @{ - */ - -#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFCU) -#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001U) -#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) -/** - * @} - */ - -/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition - * @{ - */ -#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) -#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) -#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) -#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) -#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) -#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) -#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) -/** - * @} - */ - -/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition - * @{ - */ -#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) -#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) -#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) -#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) -#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) -#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) -#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) -#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) -#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros - * @{ - */ - -/** @brief Reset SPDIFRX handle state - * @param __HANDLE__ SPDIFRX handle. - * @retval None - */ -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) -#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) do{\ - (__HANDLE__)->State = HAL_SPDIFRX_STATE_RESET;\ - (__HANDLE__)->MspInitCallback = NULL;\ - (__HANDLE__)->MspDeInitCallback = NULL;\ - }while(0) -#else -#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPDIFRX_STATE_RESET) -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - -/** @brief Disable the specified SPDIFRX peripheral (IDLE State). - * @param __HANDLE__ specifies the SPDIFRX Handle. - * @retval None - */ -#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) - -/** @brief Enable the specified SPDIFRX peripheral (SYNC State). - * @param __HANDLE__ specifies the SPDIFRX Handle. - * @retval None - */ -#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) - - -/** @brief Enable the specified SPDIFRX peripheral (RCV State). - * @param __HANDLE__ specifies the SPDIFRX Handle. - * @retval None - */ -#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) - - -/** @brief Enable or disable the specified SPDIFRX interrupts. - * @param __HANDLE__ specifies the SPDIFRX Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg SPDIFRX_IT_RXNE - * @arg SPDIFRX_IT_CSRNE - * @arg SPDIFRX_IT_PERRIE - * @arg SPDIFRX_IT_OVRIE - * @arg SPDIFRX_IT_SBLKIE - * @arg SPDIFRX_IT_SYNCDIE - * @arg SPDIFRX_IT_IFEIE - * @retval None - */ -#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) -#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR\ - &= (uint16_t)(~(__INTERRUPT__))) - -/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the SPDIFRX Handle. - * @param __INTERRUPT__ specifies the SPDIFRX interrupt source to check. - * This parameter can be one of the following values: - * @arg SPDIFRX_IT_RXNE - * @arg SPDIFRX_IT_CSRNE - * @arg SPDIFRX_IT_PERRIE - * @arg SPDIFRX_IT_OVRIE - * @arg SPDIFRX_IT_SBLKIE - * @arg SPDIFRX_IT_SYNCDIE - * @arg SPDIFRX_IT_IFEIE - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified SPDIFRX flag is set or not. - * @param __HANDLE__ specifies the SPDIFRX Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPDIFRX_FLAG_RXNE - * @arg SPDIFRX_FLAG_CSRNE - * @arg SPDIFRX_FLAG_PERR - * @arg SPDIFRX_FLAG_OVR - * @arg SPDIFRX_FLAG_SBD - * @arg SPDIFRX_FLAG_SYNCD - * @arg SPDIFRX_FLAG_FERR - * @arg SPDIFRX_FLAG_SERR - * @arg SPDIFRX_FLAG_TERR - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->SR)\ - & (__FLAG__)) == (__FLAG__)) ? SET : RESET) - -/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. - * @param __HANDLE__ specifies the USART Handle. - * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg SPDIFRX_FLAG_PERR - * @arg SPDIFRX_FLAG_OVR - * @arg SPDIFRX_SR_SBD - * @arg SPDIFRX_SR_SYNCD - * @retval None - */ -#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPDIFRX_Exported_Functions - * @{ - */ - -/** @addtogroup SPDIFRX_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); -HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); -HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, - pSPDIFRX_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, - HAL_SPDIFRX_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup SPDIFRX_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, - uint32_t Timeout); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); - -/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ -void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -/** - * @} - */ - -/** @addtogroup SPDIFRX_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control and State functions ************************************/ -HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif); -uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros - * @{ - */ -#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ - ((INPUT) == SPDIFRX_INPUT_IN2) || \ - ((INPUT) == SPDIFRX_INPUT_IN3) || \ - ((INPUT) == SPDIFRX_INPUT_IN0)) - -#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ - ((RET) == SPDIFRX_MAXRETRIES_3) || \ - ((RET) == SPDIFRX_MAXRETRIES_15) || \ - ((RET) == SPDIFRX_MAXRETRIES_63)) - -#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ - ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) - -#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ - ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) - -#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ - ((VAL) == SPDIFRX_VALIDITYMASK_ON)) - -#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ - ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) - -#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ - ((CHANNEL) == SPDIFRX_CHANNEL_B)) - -#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ - ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ - ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) - -#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ - ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) - -#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ - ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ -#endif /* SPDIFRX */ -/** - * @} - */ -#endif /* STM32F446xx */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_SPDIFRX_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h deleted file mode 100644 index 5083c10..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h +++ /dev/null @@ -1,2105 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_bus.h - * @author MCD Application Team - * @brief Header file of BUS LL module. - - @verbatim - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (++) AHB & APB peripherals, 1 dummy read is necessary - - [..] - Workarounds: - (#) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each LL_{BUS}_GRP{x}_EnableClock() function. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_BUS_H -#define __STM32F4xx_LL_BUS_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup BUS_LL BUS - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants - * @{ - */ - -/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH - * @{ - */ -#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU -#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN -#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN -#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN -#if defined(GPIOD) -#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN -#endif /* GPIOD */ -#if defined(GPIOE) -#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN -#endif /* GPIOE */ -#if defined(GPIOF) -#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN -#endif /* GPIOF */ -#if defined(GPIOG) -#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN -#endif /* GPIOG */ -#if defined(GPIOH) -#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN -#endif /* GPIOH */ -#if defined(GPIOI) -#define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN -#endif /* GPIOI */ -#if defined(GPIOJ) -#define LL_AHB1_GRP1_PERIPH_GPIOJ RCC_AHB1ENR_GPIOJEN -#endif /* GPIOJ */ -#if defined(GPIOK) -#define LL_AHB1_GRP1_PERIPH_GPIOK RCC_AHB1ENR_GPIOKEN -#endif /* GPIOK */ -#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN -#if defined(RCC_AHB1ENR_BKPSRAMEN) -#define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN -#endif /* RCC_AHB1ENR_BKPSRAMEN */ -#if defined(RCC_AHB1ENR_CCMDATARAMEN) -#define LL_AHB1_GRP1_PERIPH_CCMDATARAM RCC_AHB1ENR_CCMDATARAMEN -#endif /* RCC_AHB1ENR_CCMDATARAMEN */ -#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN -#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN -#if defined(RCC_AHB1ENR_RNGEN) -#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHB1ENR_RNGEN -#endif /* RCC_AHB1ENR_RNGEN */ -#if defined(DMA2D) -#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN -#endif /* DMA2D */ -#if defined(ETH) -#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN -#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN -#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN -#define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN -#endif /* ETH */ -#if defined(USB_OTG_HS) -#define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN -#define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN -#endif /* USB_OTG_HS */ -#define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN -#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN -#if defined(RCC_AHB1LPENR_SRAM2LPEN) -#define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN -#endif /* RCC_AHB1LPENR_SRAM2LPEN */ -#if defined(RCC_AHB1LPENR_SRAM3LPEN) -#define LL_AHB1_GRP1_PERIPH_SRAM3 RCC_AHB1LPENR_SRAM3LPEN -#endif /* RCC_AHB1LPENR_SRAM3LPEN */ -/** - * @} - */ - -#if defined(RCC_AHB2_SUPPORT) -/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH - * @{ - */ -#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(DCMI) -#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN -#endif /* DCMI */ -#if defined(CRYP) -#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN -#endif /* CRYP */ -#if defined(AES) -#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN -#endif /* AES */ -#if defined(HASH) -#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN -#endif /* HASH */ -#if defined(RCC_AHB2ENR_RNGEN) -#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN -#endif /* RCC_AHB2ENR_RNGEN */ -#if defined(USB_OTG_FS) -#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN -#endif /* USB_OTG_FS */ -/** - * @} - */ -#endif /* RCC_AHB2_SUPPORT */ - -#if defined(RCC_AHB3_SUPPORT) -/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH - * @{ - */ -#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(FSMC_Bank1) -#define LL_AHB3_GRP1_PERIPH_FSMC RCC_AHB3ENR_FSMCEN -#endif /* FSMC_Bank1 */ -#if defined(FMC_Bank1) -#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN -#endif /* FMC_Bank1 */ -#if defined(QUADSPI) -#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN -#endif /* QUADSPI */ -/** - * @} - */ -#endif /* RCC_AHB3_SUPPORT */ - -/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH - * @{ - */ -#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(TIM2) -#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN -#endif /* TIM2 */ -#if defined(TIM3) -#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN -#endif /* TIM3 */ -#if defined(TIM4) -#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN -#endif /* TIM4 */ -#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN -#if defined(TIM6) -#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN -#endif /* TIM6 */ -#if defined(TIM7) -#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN -#endif /* TIM7 */ -#if defined(TIM12) -#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN -#endif /* TIM12 */ -#if defined(TIM13) -#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN -#endif /* TIM13 */ -#if defined(TIM14) -#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN -#endif /* TIM14 */ -#if defined(LPTIM1) -#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN -#endif /* LPTIM1 */ -#if defined(RCC_APB1ENR_RTCAPBEN) -#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR_RTCAPBEN -#endif /* RCC_APB1ENR_RTCAPBEN */ -#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN -#if defined(SPI2) -#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN -#endif /* SPI2 */ -#if defined(SPI3) -#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN -#endif /* SPI3 */ -#if defined(SPDIFRX) -#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR_SPDIFRXEN -#endif /* SPDIFRX */ -#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN -#if defined(USART3) -#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN -#endif /* USART3 */ -#if defined(UART4) -#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN -#endif /* UART4 */ -#if defined(UART5) -#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN -#endif /* UART5 */ -#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN -#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN -#if defined(I2C3) -#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN -#endif /* I2C3 */ -#if defined(FMPI2C1) -#define LL_APB1_GRP1_PERIPH_FMPI2C1 RCC_APB1ENR_FMPI2C1EN -#endif /* FMPI2C1 */ -#if defined(CAN1) -#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN -#endif /* CAN1 */ -#if defined(CAN2) -#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN -#endif /* CAN2 */ -#if defined(CAN3) -#define LL_APB1_GRP1_PERIPH_CAN3 RCC_APB1ENR_CAN3EN -#endif /* CAN3 */ -#if defined(CEC) -#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN -#endif /* CEC */ -#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN -#if defined(DAC1) -#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN -#endif /* DAC1 */ -#if defined(UART7) -#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR_UART7EN -#endif /* UART7 */ -#if defined(UART8) -#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR_UART8EN -#endif /* UART8 */ -/** - * @} - */ - -/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH - * @{ - */ -#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU -#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN -#if defined(TIM8) -#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN -#endif /* TIM8 */ -#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN -#if defined(USART6) -#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN -#endif /* USART6 */ -#if defined(UART9) -#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN -#endif /* UART9 */ -#if defined(UART10) -#define LL_APB2_GRP1_PERIPH_UART10 RCC_APB2ENR_UART10EN -#endif /* UART10 */ -#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN -#if defined(ADC2) -#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN -#endif /* ADC2 */ -#if defined(ADC3) -#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN -#endif /* ADC3 */ -#if defined(SDIO) -#define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN -#endif /* SDIO */ -#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN -#if defined(SPI4) -#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN -#endif /* SPI4 */ -#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN -#if defined(RCC_APB2ENR_EXTITEN) -#define LL_APB2_GRP1_PERIPH_EXTI RCC_APB2ENR_EXTITEN -#endif /* RCC_APB2ENR_EXTITEN */ -#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN -#if defined(TIM10) -#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN -#endif /* TIM10 */ -#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN -#if defined(SPI5) -#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN -#endif /* SPI5 */ -#if defined(SPI6) -#define LL_APB2_GRP1_PERIPH_SPI6 RCC_APB2ENR_SPI6EN -#endif /* SPI6 */ -#if defined(SAI1) -#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN -#endif /* SAI1 */ -#if defined(SAI2) -#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN -#endif /* SAI2 */ -#if defined(LTDC) -#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN -#endif /* LTDC */ -#if defined(DSI) -#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN -#endif /* DSI */ -#if defined(DFSDM1_Channel0) -#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN -#endif /* DFSDM1_Channel0 */ -#if defined(DFSDM2_Channel0) -#define LL_APB2_GRP1_PERIPH_DFSDM2 RCC_APB2ENR_DFSDM2EN -#endif /* DFSDM2_Channel0 */ -#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions - * @{ - */ - -/** @defgroup BUS_LL_EF_AHB1 AHB1 - * @{ - */ - -/** - * @brief Enable AHB1 peripherals clock. - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB1ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB1 peripheral clock is enabled or not - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB1 peripherals clock. - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1ENR, Periphs); -} - -/** - * @brief Force AHB1 peripherals reset. - * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR RNGRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_ALL - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB1RSTR, Periphs); -} - -/** - * @brief Release AHB1 peripherals reset. - * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR RNGRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_ALL - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1RSTR, Periphs); -} - -/** - * @brief Enable AHB1 peripheral clocks in low-power mode - * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR RNGLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB1LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB1 peripheral clocks in low-power mode - * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR RNGLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1LPENR, Periphs); -} - -/** - * @} - */ - -#if defined(RCC_AHB2_SUPPORT) -/** @defgroup BUS_LL_EF_AHB2 AHB2 - * @{ - */ - -/** - * @brief Enable AHB2 peripherals clock. - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB2ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB2 peripheral clock is enabled or not - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB2 peripherals clock. - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2ENR, Periphs); -} - -/** - * @brief Force AHB2 peripherals reset. - * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB2RSTR, Periphs); -} - -/** - * @brief Release AHB2 peripherals reset. - * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2RSTR, Periphs); -} - -/** - * @brief Enable AHB2 peripheral clocks in low-power mode - * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR AESLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB2LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB2 peripheral clocks in low-power mode - * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR AESLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2LPENR, Periphs); -} - -/** - * @} - */ -#endif /* RCC_AHB2_SUPPORT */ - -#if defined(RCC_AHB3_SUPPORT) -/** @defgroup BUS_LL_EF_AHB3 AHB3 - * @{ - */ - -/** - * @brief Enable AHB3 peripherals clock. - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_EnableClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB3ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB3 peripheral clock is enabled or not - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_IsEnabledClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB3 peripherals clock. - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_DisableClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3ENR, Periphs); -} - -/** - * @brief Force AHB3 peripherals reset. - * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n - * AHB3RSTR FSMCRST LL_AHB3_GRP1_ForceReset\n - * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB3RSTR, Periphs); -} - -/** - * @brief Release AHB3 peripherals reset. - * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n - * AHB3RSTR FSMCRST LL_AHB3_GRP1_ReleaseReset\n - * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3RSTR, Periphs); -} - -/** - * @brief Enable AHB3 peripheral clocks in low-power mode - * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n - * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n - * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB3LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB3 peripheral clocks in low-power mode - * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n - * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n - * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3LPENR, Periphs); -} - -/** - * @} - */ -#endif /* RCC_AHB3_SUPPORT */ - -/** @defgroup BUS_LL_EF_APB1 APB1 - * @{ - */ - -/** - * @brief Enable APB1 peripherals clock. - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n - * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n - * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n - * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART7EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART8EN LL_APB1_GRP1_EnableClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB1ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB1ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if APB1 peripheral clock is enabled or not - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART7EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART8EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); -} - -/** - * @brief Disable APB1 peripherals clock. - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n - * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n - * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n - * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART7EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART8EN LL_APB1_GRP1_DisableClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1ENR, Periphs); -} - -/** - * @brief Force APB1 peripherals reset. - * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART7RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART8RST LL_APB1_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->APB1RSTR, Periphs); -} - -/** - * @brief Release APB1 peripherals reset. - * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART7RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART8RST LL_APB1_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1RSTR, Periphs); -} - -/** - * @brief Enable APB1 peripheral clocks in low-power mode - * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CECLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART7LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART8LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB1LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable APB1 peripheral clocks in low-power mode - * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CECLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART7LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART8LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1LPENR, Periphs); -} - -/** - * @} - */ - -/** @defgroup BUS_LL_EF_APB2 APB2 - * @{ - */ - -/** - * @brief Enable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n - * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n - * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n - * APB2ENR UART10EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n - * APB2ENR DSIEN LL_APB2_GRP1_EnableClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB2ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if APB2 peripheral clock is enabled or not - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR UART10EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); -} - -/** - * @brief Disable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n - * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n - * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n - * APB2ENR UART10EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n - * APB2ENR DSIEN LL_APB2_GRP1_DisableClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2ENR, Periphs); -} - -/** - * @brief Force APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR UART9RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR UART10RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI6RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DFSDM2RST LL_APB2_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_ALL - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->APB2RSTR, Periphs); -} - -/** - * @brief Release APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR UART9RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR UART10RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI6RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DFSDM2RST LL_APB2_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_ALL - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2RSTR, Periphs); -} - -/** - * @brief Enable APB2 peripheral clocks in low-power mode - * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR UART9LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR UART10LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR EXTITLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI6LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR LTDCLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB2LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable APB2 peripheral clocks in low-power mode - * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR UART9LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR UART10LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR EXTITLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI6LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR LTDCLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2LPENR, Periphs); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_BUS_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h deleted file mode 100644 index 76444fc..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h +++ /dev/null @@ -1,2868 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dma.h - * @author MCD Application Team - * @brief Header file of DMA LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_DMA_H -#define __STM32F4xx_LL_DMA_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (DMA1) || defined (DMA2) - -/** @defgroup DMA_LL DMA - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup DMA_LL_Private_Variables DMA Private Variables - * @{ - */ -/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ -static const uint8_t STREAM_OFFSET_TAB[] = -{ - (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) -}; - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DMA_LL_Private_Constants DMA Private Constants - * @{ - */ -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure - * @{ - */ -typedef struct -{ - uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer - or as Source base address in case of memory to memory transfer direction. - - This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ - - uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer - or as Destination base address in case of memory to memory transfer direction. - - This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_LL_EC_DIRECTION - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ - - uint32_t Mode; /*!< Specifies the normal or circular operation mode. - This parameter can be a value of @ref DMA_LL_EC_MODE - @note The circular buffer mode cannot be used if the memory to memory - data transfer direction is configured on the selected Stream - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ - - uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction - is incremented or not. - This parameter can be a value of @ref DMA_LL_EC_PERIPH - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ - - uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction - is incremented or not. - This parameter can be a value of @ref DMA_LL_EC_MEMORY - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ - - uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) - in case of memory to memory transfer direction. - This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ - - uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) - in case of memory to memory transfer direction. - This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ - - uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. - The data unit is equal to the source buffer configuration set in PeripheralSize - or MemorySize parameters depending in the transfer direction. - This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ - - uint32_t Channel; /*!< Specifies the peripheral channel. - This parameter can be a value of @ref DMA_LL_EC_CHANNEL - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelSelection(). */ - - uint32_t Priority; /*!< Specifies the channel priority level. - This parameter can be a value of @ref DMA_LL_EC_PRIORITY - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_LL_FIFOMODE - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream - - This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_LL_EC_MBURST - @note The burst mode is possible only if the address Increment mode is enabled. - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_LL_EC_PBURST - @note The burst mode is possible only if the address Increment mode is enabled. - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ - -} LL_DMA_InitTypeDef; -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants - * @{ - */ - -/** @defgroup DMA_LL_EC_STREAM STREAM - * @{ - */ -#define LL_DMA_STREAM_0 0x00000000U -#define LL_DMA_STREAM_1 0x00000001U -#define LL_DMA_STREAM_2 0x00000002U -#define LL_DMA_STREAM_3 0x00000003U -#define LL_DMA_STREAM_4 0x00000004U -#define LL_DMA_STREAM_5 0x00000005U -#define LL_DMA_STREAM_6 0x00000006U -#define LL_DMA_STREAM_7 0x00000007U -#define LL_DMA_STREAM_ALL 0xFFFF0000U -/** - * @} - */ - -/** @defgroup DMA_LL_EC_DIRECTION DIRECTION - * @{ - */ -#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ -#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MODE MODE - * @{ - */ -#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ -#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ -#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLEBUFFER MODE - * @{ - */ -#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ -#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PERIPH PERIPH - * @{ - */ -#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ -#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MEMORY MEMORY - * @{ - */ -#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ -#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN - * @{ - */ -#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ -#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ -#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN - * @{ - */ -#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ -#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ -#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE - * @{ - */ -#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ -#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PRIORITY PRIORITY - * @{ - */ -#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ -#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ -#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ -#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_CHANNEL CHANNEL - * @{ - */ -#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ -#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ -#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ -#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ -#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ -#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ -#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ -#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ -#if defined (DMA_SxCR_CHSEL_3) -#define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */ -#define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */ -#define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */ -#define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */ -#define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */ -#define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */ -#define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */ -#define LL_DMA_CHANNEL_15 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel15 of DMA Instance */ -#endif /* DMA_SxCR_CHSEL_3 */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MBURST MBURST - * @{ - */ -#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ -#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ -#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ -#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PBURST PBURST - * @{ - */ -#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ -#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ -#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ -#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE - * @{ - */ -#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ -#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 - * @{ - */ -#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ -#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ -#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ -#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ -#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ -#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD - * @{ - */ -#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ -#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ -#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM - * @{ - */ -#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ -#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros - * @{ - */ - -/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros - * @{ - */ -/** - * @brief Write a value in DMA register - * @param __INSTANCE__ DMA Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in DMA register - * @param __INSTANCE__ DMA Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy - * @{ - */ -/** - * @brief Convert DMAx_Streamy into DMAx - * @param __STREAM_INSTANCE__ DMAx_Streamy - * @retval DMAx - */ -#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ -(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) - -/** - * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y - * @param __STREAM_INSTANCE__ DMAx_Streamy - * @retval LL_DMA_CHANNEL_y - */ -#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ -(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ - LL_DMA_STREAM_7) - -/** - * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy - * @param __DMA_INSTANCE__ DMAx - * @param __STREAM__ LL_DMA_STREAM_y - * @retval DMAx_Streamy - */ -#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ -((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ - DMA2_Stream7) - -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ - /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions - * @{ - */ - -/** @defgroup DMA_LL_EF_Configuration Configuration - * @{ - */ -/** - * @brief Enable DMA stream. - * @rmtoll CR EN LL_DMA_EnableStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); -} - -/** - * @brief Disable DMA stream. - * @rmtoll CR EN LL_DMA_DisableStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); -} - -/** - * @brief Check if DMA stream is enabled or disabled. - * @rmtoll CR EN LL_DMA_IsEnabledStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)); -} - -/** - * @brief Configure all parameters linked to DMA transfer. - * @rmtoll CR DIR LL_DMA_ConfigTransfer\n - * CR CIRC LL_DMA_ConfigTransfer\n - * CR PINC LL_DMA_ConfigTransfer\n - * CR MINC LL_DMA_ConfigTransfer\n - * CR PSIZE LL_DMA_ConfigTransfer\n - * CR MSIZE LL_DMA_ConfigTransfer\n - * CR PL LL_DMA_ConfigTransfer\n - * CR PFCTRL LL_DMA_ConfigTransfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Configuration This parameter must be a combination of all the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL - * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD - * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD - * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH - *@retval None - */ -__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) -{ - MODIFY_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, - DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL, - Configuration); -} - -/** - * @brief Set Data transfer direction (read from peripheral or from memory). - * @rmtoll CR DIR LL_DMA_SetDataTransferDirection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR, Direction); -} - -/** - * @brief Get Data transfer direction (read from peripheral or from memory). - * @rmtoll CR DIR LL_DMA_GetDataTransferDirection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - */ -__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR)); -} - -/** - * @brief Set DMA mode normal, circular or peripheral flow control. - * @rmtoll CR CIRC LL_DMA_SetMode\n - * CR PFCTRL LL_DMA_SetMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_DMA_MODE_NORMAL - * @arg @ref LL_DMA_MODE_CIRCULAR - * @arg @ref LL_DMA_MODE_PFCTRL - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); -} - -/** - * @brief Get DMA mode normal, circular or peripheral flow control. - * @rmtoll CR CIRC LL_DMA_GetMode\n - * CR PFCTRL LL_DMA_GetMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MODE_NORMAL - * @arg @ref LL_DMA_MODE_CIRCULAR - * @arg @ref LL_DMA_MODE_PFCTRL - */ -__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); -} - -/** - * @brief Set Peripheral increment mode. - * @rmtoll CR PINC LL_DMA_SetPeriphIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param IncrementMode This parameter can be one of the following values: - * @arg @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_PERIPH_INCREMENT - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC, IncrementMode); -} - -/** - * @brief Get Peripheral increment mode. - * @rmtoll CR PINC LL_DMA_GetPeriphIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_PERIPH_INCREMENT - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC)); -} - -/** - * @brief Set Memory increment mode. - * @rmtoll CR MINC LL_DMA_SetMemoryIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param IncrementMode This parameter can be one of the following values: - * @arg @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC, IncrementMode); -} - -/** - * @brief Get Memory increment mode. - * @rmtoll CR MINC LL_DMA_GetMemoryIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC)); -} - -/** - * @brief Set Peripheral size. - * @rmtoll CR PSIZE LL_DMA_SetPeriphSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Size This parameter can be one of the following values: - * @arg @ref LL_DMA_PDATAALIGN_BYTE - * @arg @ref LL_DMA_PDATAALIGN_HALFWORD - * @arg @ref LL_DMA_PDATAALIGN_WORD - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE, Size); -} - -/** - * @brief Get Peripheral size. - * @rmtoll CR PSIZE LL_DMA_GetPeriphSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PDATAALIGN_BYTE - * @arg @ref LL_DMA_PDATAALIGN_HALFWORD - * @arg @ref LL_DMA_PDATAALIGN_WORD - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE)); -} - -/** - * @brief Set Memory size. - * @rmtoll CR MSIZE LL_DMA_SetMemorySize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Size This parameter can be one of the following values: - * @arg @ref LL_DMA_MDATAALIGN_BYTE - * @arg @ref LL_DMA_MDATAALIGN_HALFWORD - * @arg @ref LL_DMA_MDATAALIGN_WORD - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE, Size); -} - -/** - * @brief Get Memory size. - * @rmtoll CR MSIZE LL_DMA_GetMemorySize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MDATAALIGN_BYTE - * @arg @ref LL_DMA_MDATAALIGN_HALFWORD - * @arg @ref LL_DMA_MDATAALIGN_WORD - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE)); -} - -/** - * @brief Set Peripheral increment offset size. - * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param OffsetSize This parameter can be one of the following values: - * @arg @ref LL_DMA_OFFSETSIZE_PSIZE - * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS, OffsetSize); -} - -/** - * @brief Get Peripheral increment offset size. - * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_OFFSETSIZE_PSIZE - * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 - */ -__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS)); -} - -/** - * @brief Set Stream priority level. - * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Priority This parameter can be one of the following values: - * @arg @ref LL_DMA_PRIORITY_LOW - * @arg @ref LL_DMA_PRIORITY_MEDIUM - * @arg @ref LL_DMA_PRIORITY_HIGH - * @arg @ref LL_DMA_PRIORITY_VERYHIGH - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL, Priority); -} - -/** - * @brief Get Stream priority level. - * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PRIORITY_LOW - * @arg @ref LL_DMA_PRIORITY_MEDIUM - * @arg @ref LL_DMA_PRIORITY_HIGH - * @arg @ref LL_DMA_PRIORITY_VERYHIGH - */ -__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL)); -} - -/** - * @brief Set Number of data to transfer. - * @rmtoll NDTR NDT LL_DMA_SetDataLength - * @note This action has no effect if - * stream is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param NbData Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t NbData) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT, NbData); -} - -/** - * @brief Get Number of data to transfer. - * @rmtoll NDTR NDT LL_DMA_GetDataLength - * @note Once the stream is enabled, the return value indicate the - * remaining bytes to be transmitted. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT)); -} - -/** - * @brief Select Channel number associated to the Stream. - * @rmtoll CR CHSEL LL_DMA_SetChannelSelection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_0 - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 - * @arg @ref LL_DMA_CHANNEL_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Channel) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL, Channel); -} - -/** - * @brief Get the Channel number associated to the Stream. - * @rmtoll CR CHSEL LL_DMA_GetChannelSelection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_0 - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 - * @arg @ref LL_DMA_CHANNEL_7 - */ -__STATIC_INLINE uint32_t LL_DMA_GetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL)); -} - -/** - * @brief Set Memory burst transfer configuration. - * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Mburst This parameter can be one of the following values: - * @arg @ref LL_DMA_MBURST_SINGLE - * @arg @ref LL_DMA_MBURST_INC4 - * @arg @ref LL_DMA_MBURST_INC8 - * @arg @ref LL_DMA_MBURST_INC16 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST, Mburst); -} - -/** - * @brief Get Memory burst transfer configuration. - * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MBURST_SINGLE - * @arg @ref LL_DMA_MBURST_INC4 - * @arg @ref LL_DMA_MBURST_INC8 - * @arg @ref LL_DMA_MBURST_INC16 - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST)); -} - -/** - * @brief Set Peripheral burst transfer configuration. - * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Pburst This parameter can be one of the following values: - * @arg @ref LL_DMA_PBURST_SINGLE - * @arg @ref LL_DMA_PBURST_INC4 - * @arg @ref LL_DMA_PBURST_INC8 - * @arg @ref LL_DMA_PBURST_INC16 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST, Pburst); -} - -/** - * @brief Get Peripheral burst transfer configuration. - * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PBURST_SINGLE - * @arg @ref LL_DMA_PBURST_INC4 - * @arg @ref LL_DMA_PBURST_INC8 - * @arg @ref LL_DMA_PBURST_INC16 - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST)); -} - -/** - * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. - * @rmtoll CR CT LL_DMA_SetCurrentTargetMem - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param CurrentMemory This parameter can be one of the following values: - * @arg @ref LL_DMA_CURRENTTARGETMEM0 - * @arg @ref LL_DMA_CURRENTTARGETMEM1 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT, CurrentMemory); -} - -/** - * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. - * @rmtoll CR CT LL_DMA_GetCurrentTargetMem - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_CURRENTTARGETMEM0 - * @arg @ref LL_DMA_CURRENTTARGETMEM1 - */ -__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT)); -} - -/** - * @brief Enable the double buffer mode. - * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); -} - -/** - * @brief Disable the double buffer mode. - * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); -} - -/** - * @brief Get FIFO status. - * @rmtoll FCR FS LL_DMA_GetFIFOStatus - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_FIFOSTATUS_0_25 - * @arg @ref LL_DMA_FIFOSTATUS_25_50 - * @arg @ref LL_DMA_FIFOSTATUS_50_75 - * @arg @ref LL_DMA_FIFOSTATUS_75_100 - * @arg @ref LL_DMA_FIFOSTATUS_EMPTY - * @arg @ref LL_DMA_FIFOSTATUS_FULL - */ -__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FS)); -} - -/** - * @brief Disable Fifo mode. - * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); -} - -/** - * @brief Enable Fifo mode. - * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); -} - -/** - * @brief Select FIFO threshold. - * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Threshold This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH, Threshold); -} - -/** - * @brief Get FIFO threshold. - * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - */ -__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH)); -} - -/** - * @brief Configure the FIFO . - * @rmtoll FCR FTH LL_DMA_ConfigFifo\n - * FCR DMDIS LL_DMA_ConfigFifo - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param FifoMode This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOMODE_ENABLE - * @arg @ref LL_DMA_FIFOMODE_DISABLE - * @param FifoThreshold This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - * @retval None - */ -__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH|DMA_SxFCR_DMDIS, FifoMode|FifoThreshold); -} - -/** - * @brief Configure the Source and Destination addresses. - * @note This API must not be called when the DMA stream is enabled. - * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n - * PAR PA LL_DMA_ConfigAddresses - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param SrcAddress Between 0 to 0xFFFFFFFF - * @param DstAddress Between 0 to 0xFFFFFFFF - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @retval None - */ -__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) -{ - /* Direction Memory to Periph */ - if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, SrcAddress); - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, DstAddress); - } - /* Direction Periph to Memory and Memory to Memory */ - else - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, SrcAddress); - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, DstAddress); - } -} - -/** - * @brief Set the Memory address. - * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); -} - -/** - * @brief Set the Peripheral address. - * @rmtoll PAR PA LL_DMA_SetPeriphAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param PeriphAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t PeriphAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, PeriphAddress); -} - -/** - * @brief Get the Memory address. - * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); -} - -/** - * @brief Get the Peripheral address. - * @rmtoll PAR PA LL_DMA_GetPeriphAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); -} - -/** - * @brief Set the Memory to Memory Source address. - * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, MemoryAddress); -} - -/** - * @brief Set the Memory to Memory Destination address. - * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); - } - -/** - * @brief Get the Memory to Memory Source address. - * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream) - { - return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); - } - -/** - * @brief Get the Memory to Memory Destination address. - * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); -} - -/** - * @brief Set Memory 1 address (used in case of Double buffer mode). - * @rmtoll M1AR M1A LL_DMA_SetMemory1Address - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Address Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR, DMA_SxM1AR_M1A, Address); -} - -/** - * @brief Get Memory 1 address (used in case of Double buffer mode). - * @rmtoll M1AR M1A LL_DMA_GetMemory1Address - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR); -} - -/** - * @} - */ - -/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Stream 0 half transfer flag. - * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF0)==(DMA_LISR_HTIF0)); -} - -/** - * @brief Get Stream 1 half transfer flag. - * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF1)==(DMA_LISR_HTIF1)); -} - -/** - * @brief Get Stream 2 half transfer flag. - * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF2)==(DMA_LISR_HTIF2)); -} - -/** - * @brief Get Stream 3 half transfer flag. - * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF3)==(DMA_LISR_HTIF3)); -} - -/** - * @brief Get Stream 4 half transfer flag. - * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF4)==(DMA_HISR_HTIF4)); -} - -/** - * @brief Get Stream 5 half transfer flag. - * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF5)==(DMA_HISR_HTIF5)); -} - -/** - * @brief Get Stream 6 half transfer flag. - * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF6)==(DMA_HISR_HTIF6)); -} - -/** - * @brief Get Stream 7 half transfer flag. - * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF7)==(DMA_HISR_HTIF7)); -} - -/** - * @brief Get Stream 0 transfer complete flag. - * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF0)==(DMA_LISR_TCIF0)); -} - -/** - * @brief Get Stream 1 transfer complete flag. - * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF1)==(DMA_LISR_TCIF1)); -} - -/** - * @brief Get Stream 2 transfer complete flag. - * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF2)==(DMA_LISR_TCIF2)); -} - -/** - * @brief Get Stream 3 transfer complete flag. - * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF3)==(DMA_LISR_TCIF3)); -} - -/** - * @brief Get Stream 4 transfer complete flag. - * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF4)==(DMA_HISR_TCIF4)); -} - -/** - * @brief Get Stream 5 transfer complete flag. - * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF5)==(DMA_HISR_TCIF5)); -} - -/** - * @brief Get Stream 6 transfer complete flag. - * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF6)==(DMA_HISR_TCIF6)); -} - -/** - * @brief Get Stream 7 transfer complete flag. - * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF7)==(DMA_HISR_TCIF7)); -} - -/** - * @brief Get Stream 0 transfer error flag. - * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF0)==(DMA_LISR_TEIF0)); -} - -/** - * @brief Get Stream 1 transfer error flag. - * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF1)==(DMA_LISR_TEIF1)); -} - -/** - * @brief Get Stream 2 transfer error flag. - * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF2)==(DMA_LISR_TEIF2)); -} - -/** - * @brief Get Stream 3 transfer error flag. - * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF3)==(DMA_LISR_TEIF3)); -} - -/** - * @brief Get Stream 4 transfer error flag. - * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF4)==(DMA_HISR_TEIF4)); -} - -/** - * @brief Get Stream 5 transfer error flag. - * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF5)==(DMA_HISR_TEIF5)); -} - -/** - * @brief Get Stream 6 transfer error flag. - * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF6)==(DMA_HISR_TEIF6)); -} - -/** - * @brief Get Stream 7 transfer error flag. - * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF7)==(DMA_HISR_TEIF7)); -} - -/** - * @brief Get Stream 0 direct mode error flag. - * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF0)==(DMA_LISR_DMEIF0)); -} - -/** - * @brief Get Stream 1 direct mode error flag. - * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF1)==(DMA_LISR_DMEIF1)); -} - -/** - * @brief Get Stream 2 direct mode error flag. - * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF2)==(DMA_LISR_DMEIF2)); -} - -/** - * @brief Get Stream 3 direct mode error flag. - * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF3)==(DMA_LISR_DMEIF3)); -} - -/** - * @brief Get Stream 4 direct mode error flag. - * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF4)==(DMA_HISR_DMEIF4)); -} - -/** - * @brief Get Stream 5 direct mode error flag. - * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF5)==(DMA_HISR_DMEIF5)); -} - -/** - * @brief Get Stream 6 direct mode error flag. - * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF6)==(DMA_HISR_DMEIF6)); -} - -/** - * @brief Get Stream 7 direct mode error flag. - * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF7)==(DMA_HISR_DMEIF7)); -} - -/** - * @brief Get Stream 0 FIFO error flag. - * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF0)==(DMA_LISR_FEIF0)); -} - -/** - * @brief Get Stream 1 FIFO error flag. - * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF1)==(DMA_LISR_FEIF1)); -} - -/** - * @brief Get Stream 2 FIFO error flag. - * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF2)==(DMA_LISR_FEIF2)); -} - -/** - * @brief Get Stream 3 FIFO error flag. - * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF3)==(DMA_LISR_FEIF3)); -} - -/** - * @brief Get Stream 4 FIFO error flag. - * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF4)==(DMA_HISR_FEIF4)); -} - -/** - * @brief Get Stream 5 FIFO error flag. - * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF5)==(DMA_HISR_FEIF5)); -} - -/** - * @brief Get Stream 6 FIFO error flag. - * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF6)==(DMA_HISR_FEIF6)); -} - -/** - * @brief Get Stream 7 FIFO error flag. - * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF7)==(DMA_HISR_FEIF7)); -} - -/** - * @brief Clear Stream 0 half transfer flag. - * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF0); -} - -/** - * @brief Clear Stream 1 half transfer flag. - * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF1); -} - -/** - * @brief Clear Stream 2 half transfer flag. - * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF2); -} - -/** - * @brief Clear Stream 3 half transfer flag. - * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF3); -} - -/** - * @brief Clear Stream 4 half transfer flag. - * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF4); -} - -/** - * @brief Clear Stream 5 half transfer flag. - * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF5); -} - -/** - * @brief Clear Stream 6 half transfer flag. - * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF6); -} - -/** - * @brief Clear Stream 7 half transfer flag. - * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF7); -} - -/** - * @brief Clear Stream 0 transfer complete flag. - * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF0); -} - -/** - * @brief Clear Stream 1 transfer complete flag. - * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF1); -} - -/** - * @brief Clear Stream 2 transfer complete flag. - * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF2); -} - -/** - * @brief Clear Stream 3 transfer complete flag. - * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF3); -} - -/** - * @brief Clear Stream 4 transfer complete flag. - * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF4); -} - -/** - * @brief Clear Stream 5 transfer complete flag. - * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF5); -} - -/** - * @brief Clear Stream 6 transfer complete flag. - * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF6); -} - -/** - * @brief Clear Stream 7 transfer complete flag. - * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF7); -} - -/** - * @brief Clear Stream 0 transfer error flag. - * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF0); -} - -/** - * @brief Clear Stream 1 transfer error flag. - * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF1); -} - -/** - * @brief Clear Stream 2 transfer error flag. - * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF2); -} - -/** - * @brief Clear Stream 3 transfer error flag. - * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF3); -} - -/** - * @brief Clear Stream 4 transfer error flag. - * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF4); -} - -/** - * @brief Clear Stream 5 transfer error flag. - * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF5); -} - -/** - * @brief Clear Stream 6 transfer error flag. - * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF6); -} - -/** - * @brief Clear Stream 7 transfer error flag. - * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF7); -} - -/** - * @brief Clear Stream 0 direct mode error flag. - * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF0); -} - -/** - * @brief Clear Stream 1 direct mode error flag. - * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF1); -} - -/** - * @brief Clear Stream 2 direct mode error flag. - * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF2); -} - -/** - * @brief Clear Stream 3 direct mode error flag. - * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF3); -} - -/** - * @brief Clear Stream 4 direct mode error flag. - * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF4); -} - -/** - * @brief Clear Stream 5 direct mode error flag. - * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF5); -} - -/** - * @brief Clear Stream 6 direct mode error flag. - * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF6); -} - -/** - * @brief Clear Stream 7 direct mode error flag. - * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF7); -} - -/** - * @brief Clear Stream 0 FIFO error flag. - * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF0); -} - -/** - * @brief Clear Stream 1 FIFO error flag. - * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF1); -} - -/** - * @brief Clear Stream 2 FIFO error flag. - * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF2); -} - -/** - * @brief Clear Stream 3 FIFO error flag. - * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF3); -} - -/** - * @brief Clear Stream 4 FIFO error flag. - * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF4); -} - -/** - * @brief Clear Stream 5 FIFO error flag. - * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF5); -} - -/** - * @brief Clear Stream 6 FIFO error flag. - * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF6); -} - -/** - * @brief Clear Stream 7 FIFO error flag. - * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF7); -} - -/** - * @} - */ - -/** @defgroup DMA_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable Half transfer interrupt. - * @rmtoll CR HTIE LL_DMA_EnableIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); -} - -/** - * @brief Enable Transfer error interrupt. - * @rmtoll CR TEIE LL_DMA_EnableIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); -} - -/** - * @brief Enable Transfer complete interrupt. - * @rmtoll CR TCIE LL_DMA_EnableIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); -} - -/** - * @brief Enable Direct mode error interrupt. - * @rmtoll CR DMEIE LL_DMA_EnableIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); -} - -/** - * @brief Enable FIFO error interrupt. - * @rmtoll FCR FEIE LL_DMA_EnableIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); -} - -/** - * @brief Disable Half transfer interrupt. - * @rmtoll CR HTIE LL_DMA_DisableIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); -} - -/** - * @brief Disable Transfer error interrupt. - * @rmtoll CR TEIE LL_DMA_DisableIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); -} - -/** - * @brief Disable Transfer complete interrupt. - * @rmtoll CR TCIE LL_DMA_DisableIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); -} - -/** - * @brief Disable Direct mode error interrupt. - * @rmtoll CR DMEIE LL_DMA_DisableIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); -} - -/** - * @brief Disable FIFO error interrupt. - * @rmtoll FCR FEIE LL_DMA_DisableIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); -} - -/** - * @brief Check if Half transfer interrupt is enabled. - * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE); -} - -/** - * @brief Check if Transfer error nterrup is enabled. - * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE); -} - -/** - * @brief Check if Transfer complete interrupt is enabled. - * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE); -} - -/** - * @brief Check if Direct mode error interrupt is enabled. - * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE); -} - -/** - * @brief Check if FIFO error interrupt is enabled. - * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); -uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); -void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMA1 || DMA2 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_DMA_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h deleted file mode 100644 index 64c57b0..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h +++ /dev/null @@ -1,1901 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dma2d.h - * @author MCD Application Team - * @brief Header file of DMA2D LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_DMA2D_H -#define STM32F4xx_LL_DMA2D_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (DMA2D) - -/** @defgroup DMA2D_LL DMA2D - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA2D_LL_Private_Macros DMA2D Private Macros - * @{ - */ - -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA2D_LL_ES_Init_Struct DMA2D Exported Init structures - * @{ - */ - -/** - * @brief LL DMA2D Init Structure Definition - */ -typedef struct -{ - uint32_t Mode; /*!< Specifies the DMA2D transfer mode. - - This parameter can be one value of @ref DMA2D_LL_EC_MODE. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetMode(). */ - - uint32_t ColorMode; /*!< Specifies the color format of the output image. - - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. - - This parameter can be modified afterwards using, - unitary function @ref LL_DMA2D_SetOutputColorMode(). */ - - uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputGreen; /*!< Specifies the Green value of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter can be modified afterwards - using unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputRed; /*!< Specifies the Red value of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter can be modified afterwards - using unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter is not considered if RGB888 or RGB565 color mode is selected. - - This parameter can be modified afterwards using, - unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputMemoryAddress; /*!< Specifies the memory address. - - This parameter must be a number between: - Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetOutputMemAddr(). */ - - - - uint32_t LineOffset; /*!< Specifies the output line offset value. - - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetLineOffset(). */ - - uint32_t NbrOfLines; /*!< Specifies the number of lines of the area to be transferred. - - This parameter must be a number between: - Min_Data = 0x0000 and Max_Data = 0xFFFF. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetNbrOfLines(). */ - - uint32_t NbrOfPixelsPerLines; /*!< Specifies the number of pixels per lines of the area to be transferred. - - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. - - This parameter can be modified afterwards using, - unitary function @ref LL_DMA2D_SetNbrOfPixelsPerLines(). */ - - -} LL_DMA2D_InitTypeDef; - -/** - * @brief LL DMA2D Layer Configuration Structure Definition - */ -typedef struct -{ - uint32_t MemoryAddress; /*!< Specifies the foreground or background memory address. - - This parameter must be a number between: - Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetMemAddr() for foreground layer, - - @ref LL_DMA2D_BGND_SetMemAddr() for background layer. */ - - uint32_t LineOffset; /*!< Specifies the foreground or background line offset value. - - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetLineOffset() for foreground layer, - - @ref LL_DMA2D_BGND_SetLineOffset() for background layer. */ - - uint32_t ColorMode; /*!< Specifies the foreground or background color mode. - - This parameter can be one value of @ref DMA2D_LL_EC_INPUT_COLOR_MODE. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetColorMode() for foreground layer, - - @ref LL_DMA2D_BGND_SetColorMode() for background layer. */ - - uint32_t CLUTColorMode; /*!< Specifies the foreground or background CLUT color mode. - - This parameter can be one value of @ref DMA2D_LL_EC_CLUT_COLOR_MODE. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetCLUTColorMode() for foreground layer, - - @ref LL_DMA2D_BGND_SetCLUTColorMode() for background layer. */ - - uint32_t CLUTSize; /*!< Specifies the foreground or background CLUT size. - - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetCLUTSize() for foreground layer, - - @ref LL_DMA2D_BGND_SetCLUTSize() for background layer. */ - - uint32_t AlphaMode; /*!< Specifies the foreground or background alpha mode. - - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_MODE. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetAlphaMode() for foreground layer, - - @ref LL_DMA2D_BGND_SetAlphaMode() for background layer. */ - - uint32_t Alpha; /*!< Specifies the foreground or background Alpha value. - - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetAlpha() for foreground layer, - - @ref LL_DMA2D_BGND_SetAlpha() for background layer. */ - - uint32_t Blue; /*!< Specifies the foreground or background Blue color value. - - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetBlueColor() for foreground layer, - - @ref LL_DMA2D_BGND_SetBlueColor() for background layer. */ - - uint32_t Green; /*!< Specifies the foreground or background Green color value. - - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetGreenColor() for foreground layer, - - @ref LL_DMA2D_BGND_SetGreenColor() for background layer. */ - - uint32_t Red; /*!< Specifies the foreground or background Red color value. - - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetRedColor() for foreground layer, - - @ref LL_DMA2D_BGND_SetRedColor() for background layer. */ - - uint32_t CLUTMemoryAddress; /*!< Specifies the foreground or background CLUT memory address. - - This parameter must be a number between: - Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. - - This parameter can be modified afterwards using unitary functions - - @ref LL_DMA2D_FGND_SetCLUTMemAddr() for foreground layer, - - @ref LL_DMA2D_BGND_SetCLUTMemAddr() for background layer. */ - - - -} LL_DMA2D_LayerCfgTypeDef; - -/** - * @brief LL DMA2D Output Color Structure Definition - */ -typedef struct -{ - uint32_t ColorMode; /*!< Specifies the color format of the output image. - - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. - - This parameter can be modified afterwards using - unitary function @ref LL_DMA2D_SetOutputColorMode(). */ - - uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter can be modified afterwards using, - unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputGreen; /*!< Specifies the Green value of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between - Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputRed; /*!< Specifies the Red value of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - - uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. - - This parameter must be a number between: - Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - - This parameter is not considered if RGB888 or RGB565 color mode is selected. - - This parameter can be modified afterwards, - using unitary function @ref LL_DMA2D_SetOutputColor() or configuration - function @ref LL_DMA2D_ConfigOutputColor(). */ - -} LL_DMA2D_ColorTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMA2D_LL_Exported_Constants DMA2D Exported Constants - * @{ - */ - -/** @defgroup DMA2D_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_DMA2D_ReadReg function - * @{ - */ -#define LL_DMA2D_FLAG_CEIF DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ -#define LL_DMA2D_FLAG_CTCIF DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */ -#define LL_DMA2D_FLAG_CAEIF DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */ -#define LL_DMA2D_FLAG_TWIF DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ -#define LL_DMA2D_FLAG_TCIF DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ -#define LL_DMA2D_FLAG_TEIF DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ -/** - * @} - */ - -/** @defgroup DMA2D_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_DMA2D_ReadReg and LL_DMA2D_WriteReg functions - * @{ - */ -#define LL_DMA2D_IT_CEIE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ -#define LL_DMA2D_IT_CTCIE DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */ -#define LL_DMA2D_IT_CAEIE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */ -#define LL_DMA2D_IT_TWIE DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ -#define LL_DMA2D_IT_TCIE DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ -#define LL_DMA2D_IT_TEIE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ -/** - * @} - */ - -/** @defgroup DMA2D_LL_EC_MODE Mode - * @{ - */ -#define LL_DMA2D_MODE_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */ -#define LL_DMA2D_MODE_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */ -#define LL_DMA2D_MODE_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */ -#define LL_DMA2D_MODE_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */ -/** - * @} - */ - -/** @defgroup DMA2D_LL_EC_OUTPUT_COLOR_MODE Output Color Mode - * @{ - */ -#define LL_DMA2D_OUTPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ -#define LL_DMA2D_OUTPUT_MODE_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 */ -#define LL_DMA2D_OUTPUT_MODE_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 */ -#define LL_DMA2D_OUTPUT_MODE_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 */ -#define LL_DMA2D_OUTPUT_MODE_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 */ -/** - * @} - */ - -/** @defgroup DMA2D_LL_EC_INPUT_COLOR_MODE Input Color Mode - * @{ - */ -#define LL_DMA2D_INPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ -#define LL_DMA2D_INPUT_MODE_RGB888 DMA2D_FGPFCCR_CM_0 /*!< RGB888 */ -#define LL_DMA2D_INPUT_MODE_RGB565 DMA2D_FGPFCCR_CM_1 /*!< RGB565 */ -#define LL_DMA2D_INPUT_MODE_ARGB1555 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1) /*!< ARGB1555 */ -#define LL_DMA2D_INPUT_MODE_ARGB4444 DMA2D_FGPFCCR_CM_2 /*!< ARGB4444 */ -#define LL_DMA2D_INPUT_MODE_L8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_2) /*!< L8 */ -#define LL_DMA2D_INPUT_MODE_AL44 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL44 */ -#define LL_DMA2D_INPUT_MODE_AL88 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL88 */ -#define LL_DMA2D_INPUT_MODE_L4 DMA2D_FGPFCCR_CM_3 /*!< L4 */ -#define LL_DMA2D_INPUT_MODE_A8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_3) /*!< A8 */ -#define LL_DMA2D_INPUT_MODE_A4 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3) /*!< A4 */ -/** - * @} - */ - -/** @defgroup DMA2D_LL_EC_ALPHA_MODE Alpha Mode - * @{ - */ -#define LL_DMA2D_ALPHA_MODE_NO_MODIF 0x00000000U /*!< No modification of the alpha channel value */ -#define LL_DMA2D_ALPHA_MODE_REPLACE DMA2D_FGPFCCR_AM_0 /*!< Replace original alpha channel value by - programmed alpha value */ -#define LL_DMA2D_ALPHA_MODE_COMBINE DMA2D_FGPFCCR_AM_1 /*!< Replace original alpha channel value by - programmed alpha value with, - original alpha channel value */ -/** - * @} - */ - - - - -/** @defgroup DMA2D_LL_EC_CLUT_COLOR_MODE CLUT Color Mode - * @{ - */ -#define LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ -#define LL_DMA2D_CLUT_COLOR_MODE_RGB888 DMA2D_FGPFCCR_CCM /*!< RGB888 */ -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMA2D_LL_Exported_Macros DMA2D Exported Macros - * @{ - */ - -/** @defgroup DMA2D_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in DMA2D register. - * @param __INSTANCE__ DMA2D Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_DMA2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) - -/** - * @brief Read a value in DMA2D register. - * @param __INSTANCE__ DMA2D Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_DMA2D_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMA2D_LL_Exported_Functions DMA2D Exported Functions - * @{ - */ - -/** @defgroup DMA2D_LL_EF_Configuration Configuration Functions - * @{ - */ - -/** - * @brief Start a DMA2D transfer. - * @rmtoll CR START LL_DMA2D_Start - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_Start(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_START); -} - -/** - * @brief Indicate if a DMA2D transfer is ongoing. - * @rmtoll CR START LL_DMA2D_IsTransferOngoing - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsTransferOngoing(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_START) == (DMA2D_CR_START)) ? 1UL : 0UL); -} - -/** - * @brief Suspend DMA2D transfer. - * @note This API can be used to suspend automatic foreground or background CLUT loading. - * @rmtoll CR SUSP LL_DMA2D_Suspend - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_Suspend(DMA2D_TypeDef *DMA2Dx) -{ - MODIFY_REG(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); -} - -/** - * @brief Resume DMA2D transfer. - * @note This API can be used to resume automatic foreground or background CLUT loading. - * @rmtoll CR SUSP LL_DMA2D_Resume - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_Resume(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START); -} - -/** - * @brief Indicate if DMA2D transfer is suspended. - * @note This API can be used to indicate whether or not automatic foreground or - * background CLUT loading is suspended. - * @rmtoll CR SUSP LL_DMA2D_IsSuspended - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsSuspended(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_SUSP) == (DMA2D_CR_SUSP)) ? 1UL : 0UL); -} - -/** - * @brief Abort DMA2D transfer. - * @note This API can be used to abort automatic foreground or background CLUT loading. - * @rmtoll CR ABORT LL_DMA2D_Abort - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_Abort(DMA2D_TypeDef *DMA2Dx) -{ - MODIFY_REG(DMA2Dx->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); -} - -/** - * @brief Indicate if DMA2D transfer is aborted. - * @note This API can be used to indicate whether or not automatic foreground or - * background CLUT loading is aborted. - * @rmtoll CR ABORT LL_DMA2D_IsAborted - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsAborted(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_ABORT) == (DMA2D_CR_ABORT)) ? 1UL : 0UL); -} - -/** - * @brief Set DMA2D mode. - * @rmtoll CR MODE LL_DMA2D_SetMode - * @param DMA2Dx DMA2D Instance - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_MODE_M2M - * @arg @ref LL_DMA2D_MODE_M2M_PFC - * @arg @ref LL_DMA2D_MODE_M2M_BLEND - * @arg @ref LL_DMA2D_MODE_R2M - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetMode(DMA2D_TypeDef *DMA2Dx, uint32_t Mode) -{ - MODIFY_REG(DMA2Dx->CR, DMA2D_CR_MODE, Mode); -} - -/** - * @brief Return DMA2D mode - * @rmtoll CR MODE LL_DMA2D_GetMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_MODE_M2M - * @arg @ref LL_DMA2D_MODE_M2M_PFC - * @arg @ref LL_DMA2D_MODE_M2M_BLEND - * @arg @ref LL_DMA2D_MODE_R2M - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_MODE)); -} - -/** - * @brief Set DMA2D output color mode. - * @rmtoll OPFCCR CM LL_DMA2D_SetOutputColorMode - * @param DMA2Dx DMA2D Instance - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetOutputColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, ColorMode); -} - -/** - * @brief Return DMA2D output color mode. - * @rmtoll OPFCCR CM LL_DMA2D_GetOutputColorMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetOutputColorMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM)); -} - - - - -/** - * @brief Set DMA2D line offset, expressed on 14 bits ([13:0] bits). - * @rmtoll OOR LO LL_DMA2D_SetLineOffset - * @param DMA2Dx DMA2D Instance - * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) -{ - MODIFY_REG(DMA2Dx->OOR, DMA2D_OOR_LO, LineOffset); -} - -/** - * @brief Return DMA2D line offset, expressed on 14 bits ([13:0] bits). - * @rmtoll OOR LO LL_DMA2D_GetLineOffset - * @param DMA2Dx DMA2D Instance - * @retval Line offset value between Min_Data=0 and Max_Data=0x3FFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetLineOffset(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->OOR, DMA2D_OOR_LO)); -} - -/** - * @brief Set DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits). - * @rmtoll NLR PL LL_DMA2D_SetNbrOfPixelsPerLines - * @param DMA2Dx DMA2D Instance - * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfPixelsPerLines) -{ - MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_PL, (NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos)); -} - -/** - * @brief Return DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits) - * @rmtoll NLR PL LL_DMA2D_GetNbrOfPixelsPerLines - * @param DMA2Dx DMA2D Instance - * @retval Number of pixels per lines value between Min_Data=0 and Max_Data=0x3FFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_PL) >> DMA2D_NLR_PL_Pos); -} - -/** - * @brief Set DMA2D number of lines, expressed on 16 bits ([15:0] bits). - * @rmtoll NLR NL LL_DMA2D_SetNbrOfLines - * @param DMA2Dx DMA2D Instance - * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetNbrOfLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines) -{ - MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_NL, NbrOfLines); -} - -/** - * @brief Return DMA2D number of lines, expressed on 16 bits ([15:0] bits). - * @rmtoll NLR NL LL_DMA2D_GetNbrOfLines - * @param DMA2Dx DMA2D Instance - * @retval Number of lines value between Min_Data=0 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfLines(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_NL)); -} - -/** - * @brief Set DMA2D output memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll OMAR MA LL_DMA2D_SetOutputMemAddr - * @param DMA2Dx DMA2D Instance - * @param OutputMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetOutputMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t OutputMemoryAddress) -{ - LL_DMA2D_WriteReg(DMA2Dx, OMAR, OutputMemoryAddress); -} - -/** - * @brief Get DMA2D output memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll OMAR MA LL_DMA2D_GetOutputMemAddr - * @param DMA2Dx DMA2D Instance - * @retval Output memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetOutputMemAddr(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, OMAR)); -} - -/** - * @brief Set DMA2D output color, expressed on 32 bits ([31:0] bits). - * @note Output color format depends on output color mode, ARGB8888, RGB888, - * RGB565, ARGB1555 or ARGB4444. - * @note LL_DMA2D_ConfigOutputColor() API may be used instead if colors values formatting - * with respect to color mode is not done by the user code. - * @rmtoll OCOLR BLUE LL_DMA2D_SetOutputColor\n - * OCOLR GREEN LL_DMA2D_SetOutputColor\n - * OCOLR RED LL_DMA2D_SetOutputColor\n - * OCOLR ALPHA LL_DMA2D_SetOutputColor - * @param DMA2Dx DMA2D Instance - * @param OutputColor Value between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetOutputColor(DMA2D_TypeDef *DMA2Dx, uint32_t OutputColor) -{ - MODIFY_REG(DMA2Dx->OCOLR, (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1), \ - OutputColor); -} - -/** - * @brief Get DMA2D output color, expressed on 32 bits ([31:0] bits). - * @note Alpha channel and red, green, blue color values must be retrieved from the returned - * value based on the output color mode (ARGB8888, RGB888, RGB565, ARGB1555 or ARGB4444) - * as set by @ref LL_DMA2D_SetOutputColorMode. - * @rmtoll OCOLR BLUE LL_DMA2D_GetOutputColor\n - * OCOLR GREEN LL_DMA2D_GetOutputColor\n - * OCOLR RED LL_DMA2D_GetOutputColor\n - * OCOLR ALPHA LL_DMA2D_GetOutputColor - * @param DMA2Dx DMA2D Instance - * @retval Output color value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetOutputColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->OCOLR, \ - (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1))); -} - -/** - * @brief Set DMA2D line watermark, expressed on 16 bits ([15:0] bits). - * @rmtoll LWR LW LL_DMA2D_SetLineWatermark - * @param DMA2Dx DMA2D Instance - * @param LineWatermark Value between Min_Data=0 and Max_Data=0xFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetLineWatermark(DMA2D_TypeDef *DMA2Dx, uint32_t LineWatermark) -{ - MODIFY_REG(DMA2Dx->LWR, DMA2D_LWR_LW, LineWatermark); -} - -/** - * @brief Return DMA2D line watermark, expressed on 16 bits ([15:0] bits). - * @rmtoll LWR LW LL_DMA2D_GetLineWatermark - * @param DMA2Dx DMA2D Instance - * @retval Line watermark value between Min_Data=0 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetLineWatermark(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->LWR, DMA2D_LWR_LW)); -} - -/** - * @brief Set DMA2D dead time, expressed on 8 bits ([7:0] bits). - * @rmtoll AMTCR DT LL_DMA2D_SetDeadTime - * @param DMA2Dx DMA2D Instance - * @param DeadTime Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_SetDeadTime(DMA2D_TypeDef *DMA2Dx, uint32_t DeadTime) -{ - MODIFY_REG(DMA2Dx->AMTCR, DMA2D_AMTCR_DT, (DeadTime << DMA2D_AMTCR_DT_Pos)); -} - -/** - * @brief Return DMA2D dead time, expressed on 8 bits ([7:0] bits). - * @rmtoll AMTCR DT LL_DMA2D_GetDeadTime - * @param DMA2Dx DMA2D Instance - * @retval Dead time value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_GetDeadTime(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_DT) >> DMA2D_AMTCR_DT_Pos); -} - -/** - * @brief Enable DMA2D dead time functionality. - * @rmtoll AMTCR EN LL_DMA2D_EnableDeadTime - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableDeadTime(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); -} - -/** - * @brief Disable DMA2D dead time functionality. - * @rmtoll AMTCR EN LL_DMA2D_DisableDeadTime - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableDeadTime(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); -} - -/** - * @brief Indicate if DMA2D dead time functionality is enabled. - * @rmtoll AMTCR EN LL_DMA2D_IsEnabledDeadTime - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledDeadTime(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN) == (DMA2D_AMTCR_EN)) ? 1UL : 0UL); -} - -/** @defgroup DMA2D_LL_EF_FGND_Configuration Foreground Configuration Functions - * @{ - */ - -/** - * @brief Set DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll FGMAR MA LL_DMA2D_FGND_SetMemAddr - * @param DMA2Dx DMA2D Instance - * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) -{ - LL_DMA2D_WriteReg(DMA2Dx, FGMAR, MemoryAddress); -} - -/** - * @brief Get DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll FGMAR MA LL_DMA2D_FGND_GetMemAddr - * @param DMA2Dx DMA2D Instance - * @retval Foreground memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGMAR)); -} - -/** - * @brief Enable DMA2D foreground CLUT loading. - * @rmtoll FGPFCCR START LL_DMA2D_FGND_EnableCLUTLoad - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START); -} - -/** - * @brief Indicate if DMA2D foreground CLUT loading is enabled. - * @rmtoll FGPFCCR START LL_DMA2D_FGND_IsEnabledCLUTLoad - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START) == (DMA2D_FGPFCCR_START)) ? 1UL : 0UL); -} - -/** - * @brief Set DMA2D foreground color mode. - * @rmtoll FGPFCCR CM LL_DMA2D_FGND_SetColorMode - * @param DMA2Dx DMA2D Instance - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 - * @arg @ref LL_DMA2D_INPUT_MODE_L8 - * @arg @ref LL_DMA2D_INPUT_MODE_AL44 - * @arg @ref LL_DMA2D_INPUT_MODE_AL88 - * @arg @ref LL_DMA2D_INPUT_MODE_L4 - * @arg @ref LL_DMA2D_INPUT_MODE_A8 - * @arg @ref LL_DMA2D_INPUT_MODE_A4 - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM, ColorMode); -} - -/** - * @brief Return DMA2D foreground color mode. - * @rmtoll FGPFCCR CM LL_DMA2D_FGND_GetColorMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 - * @arg @ref LL_DMA2D_INPUT_MODE_L8 - * @arg @ref LL_DMA2D_INPUT_MODE_AL44 - * @arg @ref LL_DMA2D_INPUT_MODE_AL88 - * @arg @ref LL_DMA2D_INPUT_MODE_L4 - * @arg @ref LL_DMA2D_INPUT_MODE_A8 - * @arg @ref LL_DMA2D_INPUT_MODE_A4 - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetColorMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM)); -} - -/** - * @brief Set DMA2D foreground alpha mode. - * @rmtoll FGPFCCR AM LL_DMA2D_FGND_SetAlphaMode - * @param DMA2Dx DMA2D Instance - * @param AphaMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF - * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE - * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) -{ - MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM, AphaMode); -} - -/** - * @brief Return DMA2D foreground alpha mode. - * @rmtoll FGPFCCR AM LL_DMA2D_FGND_GetAlphaMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF - * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE - * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM)); -} - -/** - * @brief Set DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_SetAlpha - * @param DMA2Dx DMA2D Instance - * @param Alpha Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) -{ - MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA, (Alpha << DMA2D_FGPFCCR_ALPHA_Pos)); -} - -/** - * @brief Return DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_GetAlpha - * @param DMA2Dx DMA2D Instance - * @retval Alpha value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlpha(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA) >> DMA2D_FGPFCCR_ALPHA_Pos); -} - - -/** - * @brief Set DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). - * @rmtoll FGOR LO LL_DMA2D_FGND_SetLineOffset - * @param DMA2Dx DMA2D Instance - * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) -{ - MODIFY_REG(DMA2Dx->FGOR, DMA2D_FGOR_LO, LineOffset); -} - -/** - * @brief Return DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). - * @rmtoll FGOR LO LL_DMA2D_FGND_GetLineOffset - * @param DMA2Dx DMA2D Instance - * @retval Foreground line offset value between Min_Data=0 and Max_Data=0x3FF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGOR, DMA2D_FGOR_LO)); -} - -/** - * @brief Set DMA2D foreground color values, expressed on 24 bits ([23:0] bits). - * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetColor - * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetColor - * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetColor - * @param DMA2Dx DMA2D Instance - * @param Red Value between Min_Data=0 and Max_Data=0xFF - * @param Green Value between Min_Data=0 and Max_Data=0xFF - * @param Blue Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) -{ - MODIFY_REG(DMA2Dx->FGCOLR, (DMA2D_FGCOLR_RED | DMA2D_FGCOLR_GREEN | DMA2D_FGCOLR_BLUE), \ - ((Red << DMA2D_FGCOLR_RED_Pos) | (Green << DMA2D_FGCOLR_GREEN_Pos) | Blue)); -} - -/** - * @brief Set DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetRedColor - * @param DMA2Dx DMA2D Instance - * @param Red Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) -{ - MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED, (Red << DMA2D_FGCOLR_RED_Pos)); -} - -/** - * @brief Return DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGCOLR RED LL_DMA2D_FGND_GetRedColor - * @param DMA2Dx DMA2D Instance - * @retval Red color value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRedColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED) >> DMA2D_FGCOLR_RED_Pos); -} - -/** - * @brief Set DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetGreenColor - * @param DMA2Dx DMA2D Instance - * @param Green Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) -{ - MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN, (Green << DMA2D_FGCOLR_GREEN_Pos)); -} - -/** - * @brief Return DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_GetGreenColor - * @param DMA2Dx DMA2D Instance - * @retval Green color value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN) >> DMA2D_FGCOLR_GREEN_Pos); -} - -/** - * @brief Set DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetBlueColor - * @param DMA2Dx DMA2D Instance - * @param Blue Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) -{ - MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE, Blue); -} - -/** - * @brief Return DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). - * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_GetBlueColor - * @param DMA2Dx DMA2D Instance - * @retval Blue color value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE)); -} - -/** - * @brief Set DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll FGCMAR MA LL_DMA2D_FGND_SetCLUTMemAddr - * @param DMA2Dx DMA2D Instance - * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) -{ - LL_DMA2D_WriteReg(DMA2Dx, FGCMAR, CLUTMemoryAddress); -} - -/** - * @brief Get DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll FGCMAR MA LL_DMA2D_FGND_GetCLUTMemAddr - * @param DMA2Dx DMA2D Instance - * @retval Foreground CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGCMAR)); -} - -/** - * @brief Set DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). - * @rmtoll FGPFCCR CS LL_DMA2D_FGND_SetCLUTSize - * @param DMA2Dx DMA2D Instance - * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) -{ - MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS, (CLUTSize << DMA2D_FGPFCCR_CS_Pos)); -} - -/** - * @brief Get DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). - * @rmtoll FGPFCCR CS LL_DMA2D_FGND_GetCLUTSize - * @param DMA2Dx DMA2D Instance - * @retval Foreground CLUT size value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS) >> DMA2D_FGPFCCR_CS_Pos); -} - -/** - * @brief Set DMA2D foreground CLUT color mode. - * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_SetCLUTColorMode - * @param DMA2Dx DMA2D Instance - * @param CLUTColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) -{ - MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM, CLUTColorMode); -} - -/** - * @brief Return DMA2D foreground CLUT color mode. - * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_GetCLUTColorMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 - */ -__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM)); -} - -/** - * @} - */ - -/** @defgroup DMA2D_LL_EF_BGND_Configuration Background Configuration Functions - * @{ - */ - -/** - * @brief Set DMA2D background memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll BGMAR MA LL_DMA2D_BGND_SetMemAddr - * @param DMA2Dx DMA2D Instance - * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) -{ - LL_DMA2D_WriteReg(DMA2Dx, BGMAR, MemoryAddress); -} - -/** - * @brief Get DMA2D background memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll BGMAR MA LL_DMA2D_BGND_GetMemAddr - * @param DMA2Dx DMA2D Instance - * @retval Background memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGMAR)); -} - -/** - * @brief Enable DMA2D background CLUT loading. - * @rmtoll BGPFCCR START LL_DMA2D_BGND_EnableCLUTLoad - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START); -} - -/** - * @brief Indicate if DMA2D background CLUT loading is enabled. - * @rmtoll BGPFCCR START LL_DMA2D_BGND_IsEnabledCLUTLoad - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START) == (DMA2D_BGPFCCR_START)) ? 1UL : 0UL); -} - -/** - * @brief Set DMA2D background color mode. - * @rmtoll BGPFCCR CM LL_DMA2D_BGND_SetColorMode - * @param DMA2Dx DMA2D Instance - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 - * @arg @ref LL_DMA2D_INPUT_MODE_L8 - * @arg @ref LL_DMA2D_INPUT_MODE_AL44 - * @arg @ref LL_DMA2D_INPUT_MODE_AL88 - * @arg @ref LL_DMA2D_INPUT_MODE_L4 - * @arg @ref LL_DMA2D_INPUT_MODE_A8 - * @arg @ref LL_DMA2D_INPUT_MODE_A4 - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM, ColorMode); -} - -/** - * @brief Return DMA2D background color mode. - * @rmtoll BGPFCCR CM LL_DMA2D_BGND_GetColorMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 - * @arg @ref LL_DMA2D_INPUT_MODE_L8 - * @arg @ref LL_DMA2D_INPUT_MODE_AL44 - * @arg @ref LL_DMA2D_INPUT_MODE_AL88 - * @arg @ref LL_DMA2D_INPUT_MODE_L4 - * @arg @ref LL_DMA2D_INPUT_MODE_A8 - * @arg @ref LL_DMA2D_INPUT_MODE_A4 - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetColorMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM)); -} - -/** - * @brief Set DMA2D background alpha mode. - * @rmtoll BGPFCCR AM LL_DMA2D_BGND_SetAlphaMode - * @param DMA2Dx DMA2D Instance - * @param AphaMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF - * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE - * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) -{ - MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM, AphaMode); -} - -/** - * @brief Return DMA2D background alpha mode. - * @rmtoll BGPFCCR AM LL_DMA2D_BGND_GetAlphaMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF - * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE - * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM)); -} - -/** - * @brief Set DMA2D background alpha value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_SetAlpha - * @param DMA2Dx DMA2D Instance - * @param Alpha Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) -{ - MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA, (Alpha << DMA2D_BGPFCCR_ALPHA_Pos)); -} - -/** - * @brief Return DMA2D background alpha value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_GetAlpha - * @param DMA2Dx DMA2D Instance - * @retval Alpha value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlpha(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA) >> DMA2D_BGPFCCR_ALPHA_Pos); -} - - -/** - * @brief Set DMA2D background line offset, expressed on 14 bits ([13:0] bits). - * @rmtoll BGOR LO LL_DMA2D_BGND_SetLineOffset - * @param DMA2Dx DMA2D Instance - * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) -{ - MODIFY_REG(DMA2Dx->BGOR, DMA2D_BGOR_LO, LineOffset); -} - -/** - * @brief Return DMA2D background line offset, expressed on 14 bits ([13:0] bits). - * @rmtoll BGOR LO LL_DMA2D_BGND_GetLineOffset - * @param DMA2Dx DMA2D Instance - * @retval Background line offset value between Min_Data=0 and Max_Data=0x3FF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGOR, DMA2D_BGOR_LO)); -} - -/** - * @brief Set DMA2D background color values, expressed on 24 bits ([23:0] bits). - * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetColor - * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetColor - * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetColor - * @param DMA2Dx DMA2D Instance - * @param Red Value between Min_Data=0 and Max_Data=0xFF - * @param Green Value between Min_Data=0 and Max_Data=0xFF - * @param Blue Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) -{ - MODIFY_REG(DMA2Dx->BGCOLR, (DMA2D_BGCOLR_RED | DMA2D_BGCOLR_GREEN | DMA2D_BGCOLR_BLUE), \ - ((Red << DMA2D_BGCOLR_RED_Pos) | (Green << DMA2D_BGCOLR_GREEN_Pos) | Blue)); -} - -/** - * @brief Set DMA2D background red color value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetRedColor - * @param DMA2Dx DMA2D Instance - * @param Red Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) -{ - MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED, (Red << DMA2D_BGCOLR_RED_Pos)); -} - -/** - * @brief Return DMA2D background red color value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGCOLR RED LL_DMA2D_BGND_GetRedColor - * @param DMA2Dx DMA2D Instance - * @retval Red color value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetRedColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED) >> DMA2D_BGCOLR_RED_Pos); -} - -/** - * @brief Set DMA2D background green color value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetGreenColor - * @param DMA2Dx DMA2D Instance - * @param Green Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) -{ - MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN, (Green << DMA2D_BGCOLR_GREEN_Pos)); -} - -/** - * @brief Return DMA2D background green color value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_GetGreenColor - * @param DMA2Dx DMA2D Instance - * @retval Green color value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN) >> DMA2D_BGCOLR_GREEN_Pos); -} - -/** - * @brief Set DMA2D background blue color value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetBlueColor - * @param DMA2Dx DMA2D Instance - * @param Blue Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) -{ - MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE, Blue); -} - -/** - * @brief Return DMA2D background blue color value, expressed on 8 bits ([7:0] bits). - * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_GetBlueColor - * @param DMA2Dx DMA2D Instance - * @retval Blue color value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE)); -} - -/** - * @brief Set DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll BGCMAR MA LL_DMA2D_BGND_SetCLUTMemAddr - * @param DMA2Dx DMA2D Instance - * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) -{ - LL_DMA2D_WriteReg(DMA2Dx, BGCMAR, CLUTMemoryAddress); -} - -/** - * @brief Get DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). - * @rmtoll BGCMAR MA LL_DMA2D_BGND_GetCLUTMemAddr - * @param DMA2Dx DMA2D Instance - * @retval Background CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGCMAR)); -} - -/** - * @brief Set DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). - * @rmtoll BGPFCCR CS LL_DMA2D_BGND_SetCLUTSize - * @param DMA2Dx DMA2D Instance - * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) -{ - MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS, (CLUTSize << DMA2D_BGPFCCR_CS_Pos)); -} - -/** - * @brief Get DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). - * @rmtoll BGPFCCR CS LL_DMA2D_BGND_GetCLUTSize - * @param DMA2Dx DMA2D Instance - * @retval Background CLUT size value between Min_Data=0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS) >> DMA2D_BGPFCCR_CS_Pos); -} - -/** - * @brief Set DMA2D background CLUT color mode. - * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_SetCLUTColorMode - * @param DMA2Dx DMA2D Instance - * @param CLUTColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) -{ - MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM, CLUTColorMode); -} - -/** - * @brief Return DMA2D background CLUT color mode. - * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_GetCLUTColorMode - * @param DMA2Dx DMA2D Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 - * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 - */ -__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx) -{ - return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM)); -} - -/** - * @} - */ - -/** - * @} - */ - - -/** @defgroup DMA2D_LL_EF_FLAG_MANAGEMENT Flag Management - * @{ - */ - -/** - * @brief Check if the DMA2D Configuration Error Interrupt Flag is set or not - * @rmtoll ISR CEIF LL_DMA2D_IsActiveFlag_CE - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CE(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CEIF) == (DMA2D_ISR_CEIF)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D CLUT Transfer Complete Interrupt Flag is set or not - * @rmtoll ISR CTCIF LL_DMA2D_IsActiveFlag_CTC - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CTC(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CTCIF) == (DMA2D_ISR_CTCIF)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D CLUT Access Error Interrupt Flag is set or not - * @rmtoll ISR CAEIF LL_DMA2D_IsActiveFlag_CAE - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CAE(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CAEIF) == (DMA2D_ISR_CAEIF)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D Transfer Watermark Interrupt Flag is set or not - * @rmtoll ISR TWIF LL_DMA2D_IsActiveFlag_TW - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TW(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TWIF) == (DMA2D_ISR_TWIF)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D Transfer Complete Interrupt Flag is set or not - * @rmtoll ISR TCIF LL_DMA2D_IsActiveFlag_TC - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TC(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TCIF) == (DMA2D_ISR_TCIF)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D Transfer Error Interrupt Flag is set or not - * @rmtoll ISR TEIF LL_DMA2D_IsActiveFlag_TE - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TE(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TEIF) == (DMA2D_ISR_TEIF)) ? 1UL : 0UL); -} - -/** - * @brief Clear DMA2D Configuration Error Interrupt Flag - * @rmtoll IFCR CCEIF LL_DMA2D_ClearFlag_CE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_ClearFlag_CE(DMA2D_TypeDef *DMA2Dx) -{ - WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCEIF); -} - -/** - * @brief Clear DMA2D CLUT Transfer Complete Interrupt Flag - * @rmtoll IFCR CCTCIF LL_DMA2D_ClearFlag_CTC - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_ClearFlag_CTC(DMA2D_TypeDef *DMA2Dx) -{ - WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCTCIF); -} - -/** - * @brief Clear DMA2D CLUT Access Error Interrupt Flag - * @rmtoll IFCR CAECIF LL_DMA2D_ClearFlag_CAE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_ClearFlag_CAE(DMA2D_TypeDef *DMA2Dx) -{ - WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CAECIF); -} - -/** - * @brief Clear DMA2D Transfer Watermark Interrupt Flag - * @rmtoll IFCR CTWIF LL_DMA2D_ClearFlag_TW - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_ClearFlag_TW(DMA2D_TypeDef *DMA2Dx) -{ - WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTWIF); -} - -/** - * @brief Clear DMA2D Transfer Complete Interrupt Flag - * @rmtoll IFCR CTCIF LL_DMA2D_ClearFlag_TC - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_ClearFlag_TC(DMA2D_TypeDef *DMA2Dx) -{ - WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTCIF); -} - -/** - * @brief Clear DMA2D Transfer Error Interrupt Flag - * @rmtoll IFCR CTEIF LL_DMA2D_ClearFlag_TE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_ClearFlag_TE(DMA2D_TypeDef *DMA2Dx) -{ - WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTEIF); -} - -/** - * @} - */ - -/** @defgroup DMA2D_LL_EF_IT_MANAGEMENT Interruption Management - * @{ - */ - -/** - * @brief Enable Configuration Error Interrupt - * @rmtoll CR CEIE LL_DMA2D_EnableIT_CE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableIT_CE(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); -} - -/** - * @brief Enable CLUT Transfer Complete Interrupt - * @rmtoll CR CTCIE LL_DMA2D_EnableIT_CTC - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableIT_CTC(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); -} - -/** - * @brief Enable CLUT Access Error Interrupt - * @rmtoll CR CAEIE LL_DMA2D_EnableIT_CAE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableIT_CAE(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); -} - -/** - * @brief Enable Transfer Watermark Interrupt - * @rmtoll CR TWIE LL_DMA2D_EnableIT_TW - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableIT_TW(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); -} - -/** - * @brief Enable Transfer Complete Interrupt - * @rmtoll CR TCIE LL_DMA2D_EnableIT_TC - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableIT_TC(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); -} - -/** - * @brief Enable Transfer Error Interrupt - * @rmtoll CR TEIE LL_DMA2D_EnableIT_TE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_EnableIT_TE(DMA2D_TypeDef *DMA2Dx) -{ - SET_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); -} - -/** - * @brief Disable Configuration Error Interrupt - * @rmtoll CR CEIE LL_DMA2D_DisableIT_CE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableIT_CE(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); -} - -/** - * @brief Disable CLUT Transfer Complete Interrupt - * @rmtoll CR CTCIE LL_DMA2D_DisableIT_CTC - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableIT_CTC(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); -} - -/** - * @brief Disable CLUT Access Error Interrupt - * @rmtoll CR CAEIE LL_DMA2D_DisableIT_CAE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableIT_CAE(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); -} - -/** - * @brief Disable Transfer Watermark Interrupt - * @rmtoll CR TWIE LL_DMA2D_DisableIT_TW - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableIT_TW(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); -} - -/** - * @brief Disable Transfer Complete Interrupt - * @rmtoll CR TCIE LL_DMA2D_DisableIT_TC - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableIT_TC(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); -} - -/** - * @brief Disable Transfer Error Interrupt - * @rmtoll CR TEIE LL_DMA2D_DisableIT_TE - * @param DMA2Dx DMA2D Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA2D_DisableIT_TE(DMA2D_TypeDef *DMA2Dx) -{ - CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); -} - -/** - * @brief Check if the DMA2D Configuration Error interrupt source is enabled or disabled. - * @rmtoll CR CEIE LL_DMA2D_IsEnabledIT_CE - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CE(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_CEIE) == (DMA2D_CR_CEIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D CLUT Transfer Complete interrupt source is enabled or disabled. - * @rmtoll CR CTCIE LL_DMA2D_IsEnabledIT_CTC - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CTC(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE) == (DMA2D_CR_CTCIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D CLUT Access Error interrupt source is enabled or disabled. - * @rmtoll CR CAEIE LL_DMA2D_IsEnabledIT_CAE - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CAE(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE) == (DMA2D_CR_CAEIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D Transfer Watermark interrupt source is enabled or disabled. - * @rmtoll CR TWIE LL_DMA2D_IsEnabledIT_TW - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TW(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_TWIE) == (DMA2D_CR_TWIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D Transfer Complete interrupt source is enabled or disabled. - * @rmtoll CR TCIE LL_DMA2D_IsEnabledIT_TC - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TC(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_TCIE) == (DMA2D_CR_TCIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if the DMA2D Transfer Error interrupt source is enabled or disabled. - * @rmtoll CR TEIE LL_DMA2D_IsEnabledIT_TE - * @param DMA2Dx DMA2D Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TE(DMA2D_TypeDef *DMA2Dx) -{ - return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_TEIE) == (DMA2D_CR_TEIE)) ? 1UL : 0UL); -} - - - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions - * @{ - */ - -ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx); -ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct); -void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct); -void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx); -void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg); -void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct); -uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); -uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); -uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); -uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); -void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (DMA2D) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_LL_DMA2D_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h deleted file mode 100644 index fe28f87..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h +++ /dev/null @@ -1,1416 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fmc.h - * @author MCD Application Team - * @brief Header file of FMC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_FMC_H -#define STM32F4xx_LL_FMC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMC_LL - * @{ - */ - -/** @addtogroup FMC_LL_Private_Macros - * @{ - */ -#if defined(FMC_Bank1) - -#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \ - ((__BANK__) == FMC_NORSRAM_BANK2) || \ - ((__BANK__) == FMC_NORSRAM_BANK3) || \ - ((__BANK__) == FMC_NORSRAM_BANK4)) -#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \ - ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE)) -#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \ - ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \ - ((__MEMORY__) == FMC_MEMORY_TYPE_NOR)) -#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \ - ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \ - ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32)) -#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \ - ((__SIZE__) == FMC_PAGE_SIZE_128) || \ - ((__SIZE__) == FMC_PAGE_SIZE_256) || \ - ((__SIZE__) == FMC_PAGE_SIZE_512) || \ - ((__SIZE__) == FMC_PAGE_SIZE_1024)) -#if defined(FMC_BCR1_WFDIS) -#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \ - ((__FIFO__) == FMC_WRITE_FIFO_ENABLE)) -#endif /* FMC_BCR1_WFDIS */ -#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \ - ((__MODE__) == FMC_ACCESS_MODE_B) || \ - ((__MODE__) == FMC_ACCESS_MODE_C) || \ - ((__MODE__) == FMC_ACCESS_MODE_D)) -#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \ - ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE)) -#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \ - ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH)) -#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \ - ((__MODE__) == FMC_WRAP_MODE_ENABLE)) -#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \ - ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS)) -#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \ - ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE)) -#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \ - ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE)) -#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \ - ((__MODE__) == FMC_EXTENDED_MODE_ENABLE)) -#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \ - ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE)) -#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U)) -#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \ - ((__BURST__) == FMC_WRITE_BURST_ENABLE)) -#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ - ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) -#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U) -#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U)) -#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U)) -#define IS_FMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U) -#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U) -#define IS_FMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U)) -#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE) -#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE) - -#endif /* FMC_Bank1 */ -#if (defined(FMC_Bank3) || defined(FMC_Bank2_3)) - -#if defined(FMC_Bank2_3) -#define IS_FMC_NAND_BANK(__BANK__) (((__BANK__) == FMC_NAND_BANK2) || \ - ((__BANK__) == FMC_NAND_BANK3)) -#else -#define IS_FMC_NAND_BANK(__BANK__) ((__BANK__) == FMC_NAND_BANK3) -#endif /* FMC_Bank2_3 */ -#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \ - ((__FEATURE__) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE)) -#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \ - ((__WIDTH__) == FMC_NAND_PCC_MEM_BUS_WIDTH_16)) -#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \ - ((__STATE__) == FMC_NAND_ECC_ENABLE)) - -#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ - ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ - ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ - ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ - ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ - ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE)) -#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U) -#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U) -#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U) -#define IS_FMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U) -#define IS_FMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U) -#define IS_FMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U) -#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE) - -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ -#if defined(FMC_Bank4) -#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE) - -#endif /* FMC_Bank4 */ -#if defined(FMC_Bank5_6) - -#define IS_FMC_SDMEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \ - ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \ - ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_32)) -#define IS_FMC_WRITE_PROTECTION(__WRITE__) (((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \ - ((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_ENABLE)) -#define IS_FMC_SDCLOCK_PERIOD(__PERIOD__) (((__PERIOD__) == FMC_SDRAM_CLOCK_DISABLE) || \ - ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_2) || \ - ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_3)) -#define IS_FMC_READ_BURST(__RBURST__) (((__RBURST__) == FMC_SDRAM_RBURST_DISABLE) || \ - ((__RBURST__) == FMC_SDRAM_RBURST_ENABLE)) -#define IS_FMC_READPIPE_DELAY(__DELAY__) (((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_0) || \ - ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_1) || \ - ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_2)) -#define IS_FMC_COMMAND_MODE(__COMMAND__) (((__COMMAND__) == FMC_SDRAM_CMD_NORMAL_MODE) || \ - ((__COMMAND__) == FMC_SDRAM_CMD_CLK_ENABLE) || \ - ((__COMMAND__) == FMC_SDRAM_CMD_PALL) || \ - ((__COMMAND__) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \ - ((__COMMAND__) == FMC_SDRAM_CMD_LOAD_MODE) || \ - ((__COMMAND__) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \ - ((__COMMAND__) == FMC_SDRAM_CMD_POWERDOWN_MODE)) -#define IS_FMC_COMMAND_TARGET(__TARGET__) (((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1) || \ - ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK2) || \ - ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1_2)) -#define IS_FMC_LOADTOACTIVE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) -#define IS_FMC_EXITSELFREFRESH_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) -#define IS_FMC_SELFREFRESH_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U)) -#define IS_FMC_ROWCYCLE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) -#define IS_FMC_WRITE_RECOVERY_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U)) -#define IS_FMC_RP_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) -#define IS_FMC_RCD_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) -#define IS_FMC_AUTOREFRESH_NUMBER(__NUMBER__) (((__NUMBER__) > 0U) && ((__NUMBER__) <= 15U)) -#define IS_FMC_MODE_REGISTER(__CONTENT__) ((__CONTENT__) <= 8191U) -#define IS_FMC_REFRESH_RATE(__RATE__) ((__RATE__) <= 8191U) -#define IS_FMC_SDRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_SDRAM_DEVICE) -#define IS_FMC_SDRAM_BANK(__BANK__) (((__BANK__) == FMC_SDRAM_BANK1) || \ - ((__BANK__) == FMC_SDRAM_BANK2)) -#define IS_FMC_COLUMNBITS_NUMBER(__COLUMN__) (((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \ - ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \ - ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \ - ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_11)) -#define IS_FMC_ROWBITS_NUMBER(__ROW__) (((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_11) || \ - ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_12) || \ - ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_13)) -#define IS_FMC_INTERNALBANK_NUMBER(__NUMBER__) (((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \ - ((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_4)) -#define IS_FMC_CAS_LATENCY(__LATENCY__) (((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_1) || \ - ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_2) || \ - ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_3)) - -#endif /* FMC_Bank5_6 */ - -/** - * @} - */ - -/* Exported typedef ----------------------------------------------------------*/ - -/** @defgroup FMC_LL_Exported_typedef FMC Low Layer Exported Types - * @{ - */ - -#if defined(FMC_Bank1) -#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef -#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef -#endif /* FMC_Bank1 */ -#if defined(FMC_Bank2_3) -#define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef -#else -#define FMC_NAND_TypeDef FMC_Bank3_TypeDef -#endif /* FMC_Bank2_3 */ -#if defined(FMC_Bank4) -#define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef -#endif /* FMC_Bank4 */ -#if defined(FMC_Bank5_6) -#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef -#endif /* FMC_Bank5_6 */ - -#if defined(FMC_Bank1) -#define FMC_NORSRAM_DEVICE FMC_Bank1 -#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E -#endif /* FMC_Bank1 */ -#if defined(FMC_Bank2_3) -#define FMC_NAND_DEVICE FMC_Bank2_3 -#else -#define FMC_NAND_DEVICE FMC_Bank3 -#endif /* FMC_Bank2_3 */ -#if defined(FMC_Bank4) -#define FMC_PCCARD_DEVICE FMC_Bank4 -#endif /* FMC_Bank4 */ -#if defined(FMC_Bank5_6) -#define FMC_SDRAM_DEVICE FMC_Bank5_6 -#endif /* FMC_Bank5_6 */ - -#if defined(FMC_Bank1) -/** - * @brief FMC NORSRAM Configuration Structure definition - */ -typedef struct -{ - uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. - This parameter can be a value of @ref FMC_NORSRAM_Bank */ - - uint32_t DataAddressMux; /*!< Specifies whether the address and data values are - multiplexed on the data bus or not. - This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ - - uint32_t MemoryType; /*!< Specifies the type of external memory attached to - the corresponding memory device. - This parameter can be a value of @ref FMC_Memory_Type */ - - uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ - - uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, - valid only with synchronous burst Flash memories. - This parameter can be a value of @ref FMC_Burst_Access_Mode */ - - uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing - the Flash memory in burst mode. - This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ - - uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash - memory, valid only when accessing Flash memories in burst mode. - This parameter can be a value of @ref FMC_Wrap_Mode - This mode is not available for the STM32F446/467/479xx devices */ - - uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one - clock cycle before the wait state or during the wait state, - valid only when accessing memories in burst mode. - This parameter can be a value of @ref FMC_Wait_Timing */ - - uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC. - This parameter can be a value of @ref FMC_Write_Operation */ - - uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait - signal, valid for Flash memory access in burst mode. - This parameter can be a value of @ref FMC_Wait_Signal */ - - uint32_t ExtendedMode; /*!< Enables or disables the extended mode. - This parameter can be a value of @ref FMC_Extended_Mode */ - - uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, - valid only with asynchronous Flash memories. - This parameter can be a value of @ref FMC_AsynchronousWait */ - - uint32_t WriteBurst; /*!< Enables or disables the write burst operation. - This parameter can be a value of @ref FMC_Write_Burst */ - - uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices. - This parameter is only enabled through the FMC_BCR1 register, - and don't care through FMC_BCR2..4 registers. - This parameter can be a value of @ref FMC_Continous_Clock */ - - uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller. - This parameter is only enabled through the FMC_BCR1 register, - and don't care through FMC_BCR2..4 registers. - This parameter can be a value of @ref FMC_Write_FIFO - This mode is available only for the STM32F446/469/479xx devices */ - - uint32_t PageSize; /*!< Specifies the memory page size. - This parameter can be a value of @ref FMC_Page_Size */ -} FMC_NORSRAM_InitTypeDef; - -/** - * @brief FMC NORSRAM Timing parameters structure definition - */ -typedef struct -{ - uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address setup time. - This parameter can be a value between Min_Data = 0 and Max_Data = 15. - @note This parameter is not used with synchronous NOR Flash memories. */ - - uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address hold time. - This parameter can be a value between Min_Data = 1 and Max_Data = 15. - @note This parameter is not used with synchronous NOR Flash memories. */ - - uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the data setup time. - This parameter can be a value between Min_Data = 1 and Max_Data = 255. - @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed - NOR Flash memories. */ - - uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure - the duration of the bus turnaround. - This parameter can be a value between Min_Data = 0 and Max_Data = 15. - @note This parameter is only used for multiplexed NOR Flash memories. */ - - uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of - HCLK cycles. This parameter can be a value between Min_Data = 2 and - Max_Data = 16. - @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM - accesses. */ - - uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue - to the memory before getting the first data. - The parameter value depends on the memory type as shown below: - - It must be set to 0 in case of a CRAM - - It is don't care in asynchronous NOR, SRAM or ROM accesses - - It may assume a value between Min_Data = 2 and Max_Data = 17 - in NOR Flash memories with synchronous burst mode enable */ - - uint32_t AccessMode; /*!< Specifies the asynchronous access mode. - This parameter can be a value of @ref FMC_Access_Mode */ -} FMC_NORSRAM_TimingTypeDef; -#endif /* FMC_Bank1 */ - -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) -/** - * @brief FMC NAND Configuration Structure definition - */ -typedef struct -{ - uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. - This parameter can be a value of @ref FMC_NAND_Bank */ - - uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. - This parameter can be any value of @ref FMC_Wait_feature */ - - uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be any value of @ref FMC_NAND_Data_Width */ - - uint32_t EccComputation; /*!< Enables or disables the ECC computation. - This parameter can be any value of @ref FMC_ECC */ - - uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. - This parameter can be any value of @ref FMC_ECC_Page_Size */ - - uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ -} FMC_NAND_InitTypeDef; -#endif - -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FMC_Bank4) -/** - * @brief FMC NAND Timing parameters structure definition - */ -typedef struct -{ - uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before - the command assertion for NAND-Flash read or write access - to common/Attribute or I/O memory space (depending on - the memory space timing to be configured). - This parameter can be a value between Min_Data = 0 and Max_Data = 254 */ - - uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the - command for NAND-Flash read or write access to - common/Attribute or I/O memory space (depending on the - memory space timing to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ - - uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address - (and data for write access) after the command de-assertion - for NAND-Flash read or write access to common/Attribute - or I/O memory space (depending on the memory space timing - to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ - - uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the - data bus is kept in HiZ after the start of a NAND-Flash - write access to common/Attribute or I/O memory space (depending - on the memory space timing to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ -} FMC_NAND_PCC_TimingTypeDef; -#endif /* FMC_Bank3 || FMC_Bank2_3 */ - -#if defined(FMC_Bank4) -/** - * @brief FMC PCCARD Configuration Structure definition - */ -typedef struct -{ - uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device. - This parameter can be any value of @ref FMC_Wait_feature */ - - uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ -}FMC_PCCARD_InitTypeDef; -#endif /* FMC_Bank4 */ - -#if defined(FMC_Bank5_6) -/** - * @brief FMC SDRAM Configuration Structure definition - */ -typedef struct -{ - uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used. - This parameter can be a value of @ref FMC_SDRAM_Bank */ - - uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address. - This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */ - - uint32_t RowBitsNumber; /*!< Defines the number of bits of column address. - This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */ - - uint32_t MemoryDataWidth; /*!< Defines the memory device width. - This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */ - - uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks. - This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */ - - uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. - This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */ - - uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode. - This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */ - - uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow - to disable the clock before changing frequency. - This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */ - - uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read - commands during the CAS latency and stores data in the Read FIFO. - This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */ - - uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. - This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */ -} FMC_SDRAM_InitTypeDef; - -/** - * @brief FMC SDRAM Timing parameters structure definition - */ -typedef struct -{ - uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and - an active or Refresh command in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to - issuing the Activate command in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock - cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command - and the delay between two consecutive Refresh commands in number of - memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command - in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write - command in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ -} FMC_SDRAM_TimingTypeDef; - -/** - * @brief SDRAM command parameters structure definition - */ -typedef struct -{ - uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device. - This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */ - - uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to. - This parameter can be a value of @ref FMC_SDRAM_Command_Target. */ - - uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued - in auto refresh mode. - This parameter can be a value between Min_Data = 1 and Max_Data = 15 */ - - uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ -} FMC_SDRAM_CommandTypeDef; -#endif /* FMC_Bank5_6 */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants - * @{ - */ -#if defined(FMC_Bank1) - -/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller - * @{ - */ - -/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank - * @{ - */ -#define FMC_NORSRAM_BANK1 (0x00000000U) -#define FMC_NORSRAM_BANK2 (0x00000002U) -#define FMC_NORSRAM_BANK3 (0x00000004U) -#define FMC_NORSRAM_BANK4 (0x00000006U) -/** - * @} - */ - -/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing - * @{ - */ -#define FMC_DATA_ADDRESS_MUX_DISABLE (0x00000000U) -#define FMC_DATA_ADDRESS_MUX_ENABLE (0x00000002U) -/** - * @} - */ - -/** @defgroup FMC_Memory_Type FMC Memory Type - * @{ - */ -#define FMC_MEMORY_TYPE_SRAM (0x00000000U) -#define FMC_MEMORY_TYPE_PSRAM (0x00000004U) -#define FMC_MEMORY_TYPE_NOR (0x00000008U) -/** - * @} - */ - -/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width - * @{ - */ -#define FMC_NORSRAM_MEM_BUS_WIDTH_8 (0x00000000U) -#define FMC_NORSRAM_MEM_BUS_WIDTH_16 (0x00000010U) -#define FMC_NORSRAM_MEM_BUS_WIDTH_32 (0x00000020U) -/** - * @} - */ - -/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access - * @{ - */ -#define FMC_NORSRAM_FLASH_ACCESS_ENABLE (0x00000040U) -#define FMC_NORSRAM_FLASH_ACCESS_DISABLE (0x00000000U) -/** - * @} - */ - -/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode - * @{ - */ -#define FMC_BURST_ACCESS_MODE_DISABLE (0x00000000U) -#define FMC_BURST_ACCESS_MODE_ENABLE (0x00000100U) -/** - * @} - */ - -/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity - * @{ - */ -#define FMC_WAIT_SIGNAL_POLARITY_LOW (0x00000000U) -#define FMC_WAIT_SIGNAL_POLARITY_HIGH (0x00000200U) -/** - * @} - */ - -/** @defgroup FMC_Wrap_Mode FMC Wrap Mode - * @note This mode is not available for the STM32F446/469/479xx devices - * @{ - */ -#define FMC_WRAP_MODE_DISABLE (0x00000000U) -#define FMC_WRAP_MODE_ENABLE (0x00000400U) -/** - * @} - */ - -/** @defgroup FMC_Wait_Timing FMC Wait Timing - * @{ - */ -#define FMC_WAIT_TIMING_BEFORE_WS (0x00000000U) -#define FMC_WAIT_TIMING_DURING_WS (0x00000800U) -/** - * @} - */ - -/** @defgroup FMC_Write_Operation FMC Write Operation - * @{ - */ -#define FMC_WRITE_OPERATION_DISABLE (0x00000000U) -#define FMC_WRITE_OPERATION_ENABLE (0x00001000U) -/** - * @} - */ - -/** @defgroup FMC_Wait_Signal FMC Wait Signal - * @{ - */ -#define FMC_WAIT_SIGNAL_DISABLE (0x00000000U) -#define FMC_WAIT_SIGNAL_ENABLE (0x00002000U) -/** - * @} - */ - -/** @defgroup FMC_Extended_Mode FMC Extended Mode - * @{ - */ -#define FMC_EXTENDED_MODE_DISABLE (0x00000000U) -#define FMC_EXTENDED_MODE_ENABLE (0x00004000U) -/** - * @} - */ - -/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait - * @{ - */ -#define FMC_ASYNCHRONOUS_WAIT_DISABLE (0x00000000U) -#define FMC_ASYNCHRONOUS_WAIT_ENABLE (0x00008000U) -/** - * @} - */ - -/** @defgroup FMC_Page_Size FMC Page Size - * @{ - */ -#define FMC_PAGE_SIZE_NONE (0x00000000U) -#define FMC_PAGE_SIZE_128 FMC_BCR1_CPSIZE_0 -#define FMC_PAGE_SIZE_256 FMC_BCR1_CPSIZE_1 -#define FMC_PAGE_SIZE_512 (FMC_BCR1_CPSIZE_0\ - | FMC_BCR1_CPSIZE_1) -#define FMC_PAGE_SIZE_1024 FMC_BCR1_CPSIZE_2 -/** - * @} - */ - -/** @defgroup FMC_Write_Burst FMC Write Burst - * @{ - */ -#define FMC_WRITE_BURST_DISABLE (0x00000000U) -#define FMC_WRITE_BURST_ENABLE (0x00080000U) -/** - * @} - */ - -/** @defgroup FMC_Continous_Clock FMC Continuous Clock - * @{ - */ -#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U) -#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC (0x00100000U) -/** - * @} - */ - -#if defined(FMC_BCR1_WFDIS) -/** @defgroup FMC_Write_FIFO FMC Write FIFO - * @note These values are available only for the STM32F446/469/479xx devices. - * @{ - */ -#define FMC_WRITE_FIFO_DISABLE FMC_BCR1_WFDIS -#define FMC_WRITE_FIFO_ENABLE (0x00000000U) -#endif /* FMC_BCR1_WFDIS */ -/** - * @} - */ - -/** @defgroup FMC_Access_Mode FMC Access Mode - * @{ - */ -#define FMC_ACCESS_MODE_A (0x00000000U) -#define FMC_ACCESS_MODE_B (0x10000000U) -#define FMC_ACCESS_MODE_C (0x20000000U) -#define FMC_ACCESS_MODE_D (0x30000000U) -/** - * @} - */ - -/** - * @} - */ -#endif /* FMC_Bank1 */ - -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FMC_Bank4) - -/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller - * @{ - */ -/** @defgroup FMC_NAND_Bank FMC NAND Bank - * @{ - */ -#if defined(FMC_Bank2_3) -#define FMC_NAND_BANK2 (0x00000010U) -#endif -#define FMC_NAND_BANK3 (0x00000100U) -/** - * @} - */ - -/** @defgroup FMC_Wait_feature FMC Wait feature - * @{ - */ -#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE (0x00000000U) -#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE (0x00000002U) -/** - * @} - */ - -/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type - * @{ - */ -#if defined(FMC_Bank4) -#define FMC_PCR_MEMORY_TYPE_PCCARD (0x00000000U) -#endif /* FMC_Bank4 */ -#define FMC_PCR_MEMORY_TYPE_NAND (0x00000008U) -/** - * @} - */ - -/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width - * @{ - */ -#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 (0x00000000U) -#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 (0x00000010U) -/** - * @} - */ - -/** @defgroup FMC_ECC FMC ECC - * @{ - */ -#define FMC_NAND_ECC_DISABLE (0x00000000U) -#define FMC_NAND_ECC_ENABLE (0x00000040U) -/** - * @} - */ - -/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size - * @{ - */ -#define FMC_NAND_ECC_PAGE_SIZE_256BYTE (0x00000000U) -#define FMC_NAND_ECC_PAGE_SIZE_512BYTE (0x00020000U) -#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE (0x00040000U) -#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE (0x00060000U) -#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE (0x00080000U) -#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE (0x000A0000U) -/** - * @} - */ - -/** - * @} - */ -#endif /* FMC_Bank3 || FMC_Bank2_3 || FMC_Bank4 */ - -#if defined(FMC_Bank5_6) -/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller - * @{ - */ -/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank - * @{ - */ -#define FMC_SDRAM_BANK1 (0x00000000U) -#define FMC_SDRAM_BANK2 (0x00000001U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number - * @{ - */ -#define FMC_SDRAM_COLUMN_BITS_NUM_8 (0x00000000U) -#define FMC_SDRAM_COLUMN_BITS_NUM_9 (0x00000001U) -#define FMC_SDRAM_COLUMN_BITS_NUM_10 (0x00000002U) -#define FMC_SDRAM_COLUMN_BITS_NUM_11 (0x00000003U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number - * @{ - */ -#define FMC_SDRAM_ROW_BITS_NUM_11 (0x00000000U) -#define FMC_SDRAM_ROW_BITS_NUM_12 (0x00000004U) -#define FMC_SDRAM_ROW_BITS_NUM_13 (0x00000008U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width - * @{ - */ -#define FMC_SDRAM_MEM_BUS_WIDTH_8 (0x00000000U) -#define FMC_SDRAM_MEM_BUS_WIDTH_16 (0x00000010U) -#define FMC_SDRAM_MEM_BUS_WIDTH_32 (0x00000020U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number - * @{ - */ -#define FMC_SDRAM_INTERN_BANKS_NUM_2 (0x00000000U) -#define FMC_SDRAM_INTERN_BANKS_NUM_4 (0x00000040U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency - * @{ - */ -#define FMC_SDRAM_CAS_LATENCY_1 (0x00000080U) -#define FMC_SDRAM_CAS_LATENCY_2 (0x00000100U) -#define FMC_SDRAM_CAS_LATENCY_3 (0x00000180U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection - * @{ - */ -#define FMC_SDRAM_WRITE_PROTECTION_DISABLE (0x00000000U) -#define FMC_SDRAM_WRITE_PROTECTION_ENABLE (0x00000200U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period - * @{ - */ -#define FMC_SDRAM_CLOCK_DISABLE (0x00000000U) -#define FMC_SDRAM_CLOCK_PERIOD_2 (0x00000800U) -#define FMC_SDRAM_CLOCK_PERIOD_3 (0x00000C00U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst - * @{ - */ -#define FMC_SDRAM_RBURST_DISABLE (0x00000000U) -#define FMC_SDRAM_RBURST_ENABLE (0x00001000U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay - * @{ - */ -#define FMC_SDRAM_RPIPE_DELAY_0 (0x00000000U) -#define FMC_SDRAM_RPIPE_DELAY_1 (0x00002000U) -#define FMC_SDRAM_RPIPE_DELAY_2 (0x00004000U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode - * @{ - */ -#define FMC_SDRAM_CMD_NORMAL_MODE (0x00000000U) -#define FMC_SDRAM_CMD_CLK_ENABLE (0x00000001U) -#define FMC_SDRAM_CMD_PALL (0x00000002U) -#define FMC_SDRAM_CMD_AUTOREFRESH_MODE (0x00000003U) -#define FMC_SDRAM_CMD_LOAD_MODE (0x00000004U) -#define FMC_SDRAM_CMD_SELFREFRESH_MODE (0x00000005U) -#define FMC_SDRAM_CMD_POWERDOWN_MODE (0x00000006U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target - * @{ - */ -#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2 -#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1 -#define FMC_SDRAM_CMD_TARGET_BANK1_2 (0x00000018U) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status - * @{ - */ -#define FMC_SDRAM_NORMAL_MODE (0x00000000U) -#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0 -#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1 -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMC_Bank5_6 */ - -/** @defgroup FMC_LL_Interrupt_definition FMC Low Layer Interrupt definition - * @{ - */ -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FMC_Bank4) -#define FMC_IT_RISING_EDGE (0x00000008U) -#define FMC_IT_LEVEL (0x00000010U) -#define FMC_IT_FALLING_EDGE (0x00000020U) -#endif /* FMC_Bank3 || FMC_Bank2_3 || FMC_Bank4 */ -#if defined(FMC_Bank5_6) -#define FMC_IT_REFRESH_ERROR (0x00004000U) -#endif /* FMC_Bank5_6 */ -/** - * @} - */ - -/** @defgroup FMC_LL_Flag_definition FMC Low Layer Flag definition - * @{ - */ -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FMC_Bank4) -#define FMC_FLAG_RISING_EDGE (0x00000001U) -#define FMC_FLAG_LEVEL (0x00000002U) -#define FMC_FLAG_FALLING_EDGE (0x00000004U) -#define FMC_FLAG_FEMPT (0x00000040U) -#endif /* FMC_Bank3 || FMC_Bank2_3 || FMC_Bank4 */ -#if defined(FMC_Bank5_6) -#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE -#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY -#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE -#endif /* FMC_Bank5_6 */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup FMC_LL_Private_Macros FMC_LL Private Macros - * @{ - */ -#if defined(FMC_Bank1) -/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros - * @brief macros to handle NOR device enable/disable and read/write operations - * @{ - */ - -/** - * @brief Enable the NORSRAM device access. - * @param __INSTANCE__ FMC_NORSRAM Instance - * @param __BANK__ FMC_NORSRAM Bank - * @retval None - */ -#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ - |= FMC_BCR1_MBKEN) - -/** - * @brief Disable the NORSRAM device access. - * @param __INSTANCE__ FMC_NORSRAM Instance - * @param __BANK__ FMC_NORSRAM Bank - * @retval None - */ -#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ - &= ~FMC_BCR1_MBKEN) - -/** - * @} - */ -#endif /* FMC_Bank1 */ - -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) -/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros - * @brief macros to handle NAND device enable/disable - * @{ - */ - -/** - * @brief Enable the NAND device access. - * @param __INSTANCE__ FMC_NAND Instance - * @param __BANK__ FMC_NAND Bank - * @retval None - */ -#if defined(FMC_Bank2_3) -#if defined (FMC_PCR_PBKEN) -#define __FMC_NAND_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN) -#else -#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \ - ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN)) -#endif /* FMC_PCR_PBKEN */ -#else -#define __FMC_NAND_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN) -#endif /* FMC_Bank2_3 */ - -/** - * @brief Disable the NAND device access. - * @param __INSTANCE__ FMC_NAND Instance - * @param __BANK__ FMC_NAND Bank - * @retval None - */ -#if defined(FMC_Bank2_3) -#if defined (FMC_PCR_PBKEN) -#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN) -#else -#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->PCR2, FMC_PCR2_PBKEN): \ - CLEAR_BIT((__INSTANCE__)->PCR3, FMC_PCR3_PBKEN)) -#endif /* FMC_PCR_PBKEN */ -#else -#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN) -#endif /* FMC_Bank2_3 */ - -/** - * @} - */ -#endif /* FMC_Bank3 || FMC_Bank2_3 */ - -#if defined(FMC_Bank4) -/** @defgroup FMC_LL_PCCARD_Macros FMC PCCARD Macros - * @brief macros to handle PCCARD read/write operations - * @{ - */ -/** - * @brief Enable the PCCARD device access. - * @param __INSTANCE__ FMC_PCCARD Instance - * @retval None - */ -#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN) - -/** - * @brief Disable the PCCARD device access. - * @param __INSTANCE__ FMC_PCCARD Instance - * @retval None - */ -#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN) -/** - * @} - */ - -#endif -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) -/** @defgroup FMC_LL_NAND_Interrupt FMC NAND Interrupt - * @brief macros to handle NAND interrupts - * @{ - */ - -/** - * @brief Enable the NAND device interrupt. - * @param __INSTANCE__ FMC_NAND instance - * @param __BANK__ FMC_NAND Bank - * @param __INTERRUPT__ FMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#if defined(FMC_Bank2_3) -#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \ - ((__INSTANCE__)->SR3 |= (__INTERRUPT__))) -#else -#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__)) -#endif /* FMC_Bank2_3 */ - -/** - * @brief Disable the NAND device interrupt. - * @param __INSTANCE__ FMC_NAND Instance - * @param __BANK__ FMC_NAND Bank - * @param __INTERRUPT__ FMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#if defined(FMC_Bank2_3) -#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \ - ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__))) -#else -#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__)) -#endif /* FMC_Bank2_3 */ - -/** - * @brief Get flag status of the NAND device. - * @param __INSTANCE__ FMC_NAND Instance - * @param __BANK__ FMC_NAND Bank - * @param __FLAG__ FMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#if defined(FMC_Bank2_3) -#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \ - (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__))) -#else -#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__)) -#endif /* FMC_Bank2_3 */ - -/** - * @brief Clear flag status of the NAND device. - * @param __INSTANCE__ FMC_NAND Instance - * @param __BANK__ FMC_NAND Bank - * @param __FLAG__ FMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#if defined(FMC_Bank2_3) -#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \ - ((__INSTANCE__)->SR3 &= ~(__FLAG__))) -#else -#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__)) -#endif /* FMC_Bank2_3 */ - -/** - * @} - */ -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - -#if defined(FMC_Bank4) -/** @defgroup FMC_LL_PCCARD_Interrupt FMC PCCARD Interrupt - * @brief macros to handle PCCARD interrupts - * @{ - */ - -/** - * @brief Enable the PCCARD device interrupt. - * @param __INSTANCE__ FMC_PCCARD instance - * @param __INTERRUPT__ FMC_PCCARD interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__)) - -/** - * @brief Disable the PCCARD device interrupt. - * @param __INSTANCE__ FMC_PCCARD instance - * @param __INTERRUPT__ FMC_PCCARD interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__)) - -/** - * @brief Get flag status of the PCCARD device. - * @param __INSTANCE__ FMC_PCCARD instance - * @param __FLAG__ FMC_PCCARD flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear flag status of the PCCARD device. - * @param __INSTANCE__ FMC_PCCARD instance - * @param __FLAG__ FMC_PCCARD flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__)) - -/** - * @} - */ -#endif - -#if defined(FMC_Bank5_6) -/** @defgroup FMC_LL_SDRAM_Interrupt FMC SDRAM Interrupt - * @brief macros to handle SDRAM interrupts - * @{ - */ - -/** - * @brief Enable the SDRAM device interrupt. - * @param __INSTANCE__ FMC_SDRAM instance - * @param __INTERRUPT__ FMC_SDRAM interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error - * @retval None - */ -#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__)) - -/** - * @brief Disable the SDRAM device interrupt. - * @param __INSTANCE__ FMC_SDRAM instance - * @param __INTERRUPT__ FMC_SDRAM interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error - * @retval None - */ -#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__)) - -/** - * @brief Get flag status of the SDRAM device. - * @param __INSTANCE__ FMC_SDRAM instance - * @param __FLAG__ FMC_SDRAM flag - * This parameter can be any combination of the following values: - * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error. - * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag. - * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear flag status of the SDRAM device. - * @param __INSTANCE__ FMC_SDRAM instance - * @param __FLAG__ FMC_SDRAM flag - * This parameter can be any combination of the following values: - * @arg FMC_SDRAM_FLAG_REFRESH_ERROR - * @retval None - */ -#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__)) - -/** - * @} - */ -#endif /* FMC_Bank5_6 */ -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions - * @{ - */ - -#if defined(FMC_Bank1) -/** @defgroup FMC_LL_NORSRAM NOR SRAM - * @{ - */ -/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, - FMC_NORSRAM_InitTypeDef *Init); -HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, - FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, - FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, - uint32_t ExtendedMode); -HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, - FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions - * @{ - */ -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ -/** - * @} - */ -#endif /* FMC_Bank1 */ - -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) -/** @defgroup FMC_LL_NAND NAND - * @{ - */ -/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init); -HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions - * @{ - */ -HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, - uint32_t Timeout); -/** - * @} - */ -/** - * @} - */ -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - -#if defined(FMC_Bank4) -/** @defgroup FMC_LL_PCCARD PCCARD - * @{ - */ -/** @defgroup FMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init); -HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device); -/** - * @} - */ -/** - * @} - */ -#endif /* FMC_Bank4 */ - -#if defined(FMC_Bank5_6) -/** @defgroup FMC_LL_SDRAM SDRAM - * @{ - */ -/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init); -HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, - FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions - * @{ - */ -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, - FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout); -HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate); -HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, - uint32_t AutoRefreshNumber); -uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ -/** - * @} - */ -#endif /* FMC_Bank5_6 */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_LL_FMC_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmpi2c.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmpi2c.h deleted file mode 100644 index dcc0016..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmpi2c.h +++ /dev/null @@ -1,2234 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fmpi2c.h - * @author MCD Application Team - * @brief Header file of FMPI2C LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_FMPI2C_H -#define STM32F4xx_LL_FMPI2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(FMPI2C_CR1_PE) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (FMPI2C1) - -/** @defgroup FMPI2C_LL FMPI2C - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMPI2C_LL_Private_Constants FMPI2C Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup FMPI2C_LL_Private_Macros FMPI2C Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup FMPI2C_LL_ES_INIT FMPI2C Exported Init structure - * @{ - */ -typedef struct -{ - uint32_t PeripheralMode; /*!< Specifies the peripheral mode. - This parameter can be a value of @ref FMPI2C_LL_EC_PERIPHERAL_MODE. - - This feature can be modified afterwards using unitary function - @ref LL_FMPI2C_SetMode(). */ - - uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. - This parameter must be set by referring to the STM32CubeMX Tool and - the helper macro @ref __LL_FMPI2C_CONVERT_TIMINGS(). - - This feature can be modified afterwards using unitary function - @ref LL_FMPI2C_SetTiming(). */ - - uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. - This parameter can be a value of @ref FMPI2C_LL_EC_ANALOGFILTER_SELECTION. - - This feature can be modified afterwards using unitary functions - @ref LL_FMPI2C_EnableAnalogFilter() or LL_FMPI2C_DisableAnalogFilter(). */ - - uint32_t DigitalFilter; /*!< Configures the digital noise filter. - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. - - This feature can be modified afterwards using unitary function - @ref LL_FMPI2C_SetDigitalFilter(). */ - - uint32_t OwnAddress1; /*!< Specifies the device own address 1. - This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. - - This feature can be modified afterwards using unitary function - @ref LL_FMPI2C_SetOwnAddress1(). */ - - uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive - match code or next received byte. - This parameter can be a value of @ref FMPI2C_LL_EC_I2C_ACKNOWLEDGE. - - This feature can be modified afterwards using unitary function - @ref LL_FMPI2C_AcknowledgeNextData(). */ - - uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). - This parameter can be a value of @ref FMPI2C_LL_EC_OWNADDRESS1. - - This feature can be modified afterwards using unitary function - @ref LL_FMPI2C_SetOwnAddress1(). */ -} LL_FMPI2C_InitTypeDef; -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FMPI2C_LL_Exported_Constants FMPI2C Exported Constants - * @{ - */ - -/** @defgroup FMPI2C_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_FMPI2C_WriteReg function - * @{ - */ -#define LL_FMPI2C_ICR_ADDRCF FMPI2C_ICR_ADDRCF /*!< Address Matched flag */ -#define LL_FMPI2C_ICR_NACKCF FMPI2C_ICR_NACKCF /*!< Not Acknowledge flag */ -#define LL_FMPI2C_ICR_STOPCF FMPI2C_ICR_STOPCF /*!< Stop detection flag */ -#define LL_FMPI2C_ICR_BERRCF FMPI2C_ICR_BERRCF /*!< Bus error flag */ -#define LL_FMPI2C_ICR_ARLOCF FMPI2C_ICR_ARLOCF /*!< Arbitration Lost flag */ -#define LL_FMPI2C_ICR_OVRCF FMPI2C_ICR_OVRCF /*!< Overrun/Underrun flag */ -#define LL_FMPI2C_ICR_PECCF FMPI2C_ICR_PECCF /*!< PEC error flag */ -#define LL_FMPI2C_ICR_TIMOUTCF FMPI2C_ICR_TIMOUTCF /*!< Timeout detection flag */ -#define LL_FMPI2C_ICR_ALERTCF FMPI2C_ICR_ALERTCF /*!< Alert flag */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_FMPI2C_ReadReg function - * @{ - */ -#define LL_FMPI2C_ISR_TXE FMPI2C_ISR_TXE /*!< Transmit data register empty */ -#define LL_FMPI2C_ISR_TXIS FMPI2C_ISR_TXIS /*!< Transmit interrupt status */ -#define LL_FMPI2C_ISR_RXNE FMPI2C_ISR_RXNE /*!< Receive data register not empty */ -#define LL_FMPI2C_ISR_ADDR FMPI2C_ISR_ADDR /*!< Address matched (slave mode) */ -#define LL_FMPI2C_ISR_NACKF FMPI2C_ISR_NACKF /*!< Not Acknowledge received flag */ -#define LL_FMPI2C_ISR_STOPF FMPI2C_ISR_STOPF /*!< Stop detection flag */ -#define LL_FMPI2C_ISR_TC FMPI2C_ISR_TC /*!< Transfer Complete (master mode) */ -#define LL_FMPI2C_ISR_TCR FMPI2C_ISR_TCR /*!< Transfer Complete Reload */ -#define LL_FMPI2C_ISR_BERR FMPI2C_ISR_BERR /*!< Bus error */ -#define LL_FMPI2C_ISR_ARLO FMPI2C_ISR_ARLO /*!< Arbitration lost */ -#define LL_FMPI2C_ISR_OVR FMPI2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ -#define LL_FMPI2C_ISR_PECERR FMPI2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ -#define LL_FMPI2C_ISR_TIMEOUT FMPI2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ -#define LL_FMPI2C_ISR_ALERT FMPI2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ -#define LL_FMPI2C_ISR_BUSY FMPI2C_ISR_BUSY /*!< Bus busy */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_FMPI2C_ReadReg and LL_FMPI2C_WriteReg functions - * @{ - */ -#define LL_FMPI2C_CR1_TXIE FMPI2C_CR1_TXIE /*!< TX Interrupt enable */ -#define LL_FMPI2C_CR1_RXIE FMPI2C_CR1_RXIE /*!< RX Interrupt enable */ -#define LL_FMPI2C_CR1_ADDRIE FMPI2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ -#define LL_FMPI2C_CR1_NACKIE FMPI2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ -#define LL_FMPI2C_CR1_STOPIE FMPI2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ -#define LL_FMPI2C_CR1_TCIE FMPI2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ -#define LL_FMPI2C_CR1_ERRIE FMPI2C_CR1_ERRIE /*!< Error interrupts enable */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_PERIPHERAL_MODE Peripheral Mode - * @{ - */ -#define LL_FMPI2C_MODE_I2C 0x00000000U /*!< FMPI2C Master or Slave mode */ -#define LL_FMPI2C_MODE_SMBUS_HOST FMPI2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ -#define LL_FMPI2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode - (Default address not acknowledge) */ -#define LL_FMPI2C_MODE_SMBUS_DEVICE_ARP FMPI2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection - * @{ - */ -#define LL_FMPI2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ -#define LL_FMPI2C_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF /*!< Analog filter is disabled. */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_ADDRESSING_MODE Master Addressing Mode - * @{ - */ -#define LL_FMPI2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ -#define LL_FMPI2C_ADDRESSING_MODE_10BIT FMPI2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_OWNADDRESS1 Own Address 1 Length - * @{ - */ -#define LL_FMPI2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ -#define LL_FMPI2C_OWNADDRESS1_10BIT FMPI2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_OWNADDRESS2 Own Address 2 Masks - * @{ - */ -#define LL_FMPI2C_OWNADDRESS2_NOMASK FMPI2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ -#define LL_FMPI2C_OWNADDRESS2_MASK01 FMPI2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ -#define LL_FMPI2C_OWNADDRESS2_MASK02 FMPI2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ -#define LL_FMPI2C_OWNADDRESS2_MASK03 FMPI2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ -#define LL_FMPI2C_OWNADDRESS2_MASK04 FMPI2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ -#define LL_FMPI2C_OWNADDRESS2_MASK05 FMPI2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ -#define LL_FMPI2C_OWNADDRESS2_MASK06 FMPI2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ -#define LL_FMPI2C_OWNADDRESS2_MASK07 FMPI2C_OAR2_OA2MASK07 /*!< No comparison is done. - All Address2 are acknowledged. */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation - * @{ - */ -#define LL_FMPI2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ -#define LL_FMPI2C_NACK FMPI2C_CR2_NACK /*!< NACK is sent after current received byte.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_ADDRSLAVE Slave Address Length - * @{ - */ -#define LL_FMPI2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ -#define LL_FMPI2C_ADDRSLAVE_10BIT FMPI2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_REQUEST Transfer Request Direction - * @{ - */ -#define LL_FMPI2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ -#define LL_FMPI2C_REQUEST_READ FMPI2C_CR2_RD_WRN /*!< Master request a read transfer. */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_MODE Transfer End Mode - * @{ - */ -#define LL_FMPI2C_MODE_RELOAD FMPI2C_CR2_RELOAD /*!< Enable FMPI2C Reload mode. */ -#define LL_FMPI2C_MODE_AUTOEND FMPI2C_CR2_AUTOEND /*!< Enable FMPI2C Automatic end mode - with no HW PEC comparison. */ -#define LL_FMPI2C_MODE_SOFTEND 0x00000000U /*!< Enable FMPI2C Software end mode - with no HW PEC comparison. */ -#define LL_FMPI2C_MODE_SMBUS_RELOAD LL_FMPI2C_MODE_RELOAD /*!< Enable FMPSMBUS Automatic end mode - with HW PEC comparison. */ -#define LL_FMPI2C_MODE_SMBUS_AUTOEND_NO_PEC LL_FMPI2C_MODE_AUTOEND /*!< Enable FMPSMBUS Automatic end mode - with HW PEC comparison. */ -#define LL_FMPI2C_MODE_SMBUS_SOFTEND_NO_PEC LL_FMPI2C_MODE_SOFTEND /*!< Enable FMPSMBUS Software end mode - with HW PEC comparison. */ -#define LL_FMPI2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_FMPI2C_MODE_AUTOEND | FMPI2C_CR2_PECBYTE) -/*!< Enable FMPSMBUS Automatic end mode with HW PEC comparison. */ -#define LL_FMPI2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_FMPI2C_MODE_SOFTEND | FMPI2C_CR2_PECBYTE) -/*!< Enable FMPSMBUS Software end mode with HW PEC comparison. */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_GENERATE Start And Stop Generation - * @{ - */ -#define LL_FMPI2C_GENERATE_NOSTARTSTOP 0x00000000U -/*!< Don't Generate Stop and Start condition. */ -#define LL_FMPI2C_GENERATE_STOP (uint32_t)(0x80000000U | FMPI2C_CR2_STOP) -/*!< Generate Stop condition (Size should be set to 0). */ -#define LL_FMPI2C_GENERATE_START_READ (uint32_t)(0x80000000U | FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN) -/*!< Generate Start for read request. */ -#define LL_FMPI2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | FMPI2C_CR2_START) -/*!< Generate Start for write request. */ -#define LL_FMPI2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN) -/*!< Generate Restart for read request, slave 7Bit address. */ -#define LL_FMPI2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | FMPI2C_CR2_START) -/*!< Generate Restart for write request, slave 7Bit address. */ -#define LL_FMPI2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | FMPI2C_CR2_START | \ - FMPI2C_CR2_RD_WRN | FMPI2C_CR2_HEAD10R) -/*!< Generate Restart for read request, slave 10Bit address. */ -#define LL_FMPI2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | FMPI2C_CR2_START) -/*!< Generate Restart for write request, slave 10Bit address.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_DIRECTION Read Write Direction - * @{ - */ -#define LL_FMPI2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, - slave enters receiver mode. */ -#define LL_FMPI2C_DIRECTION_READ FMPI2C_ISR_DIR /*!< Read transfer request by master, - slave enters transmitter mode.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_DMA_REG_DATA DMA Register Data - * @{ - */ -#define LL_FMPI2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for - transmission */ -#define LL_FMPI2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for - reception */ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout - * @{ - */ -#define LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect - SCL low level timeout. */ -#define LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH FMPI2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect - both SCL and SDA high level timeout.*/ -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection - * @{ - */ -#define LL_FMPI2C_FMPSMBUS_TIMEOUTA FMPI2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ -#define LL_FMPI2C_FMPSMBUS_TIMEOUTB FMPI2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) - enable bit */ -#define LL_FMPI2C_FMPSMBUS_ALL_TIMEOUT (uint32_t)(FMPI2C_TIMEOUTR_TIMOUTEN | \ - FMPI2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB -(extended clock) enable bits */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FMPI2C_LL_Exported_Macros FMPI2C Exported Macros - * @{ - */ - -/** @defgroup FMPI2C_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in FMPI2C register - * @param __INSTANCE__ FMPI2C Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_FMPI2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in FMPI2C register - * @param __INSTANCE__ FMPI2C Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_FMPI2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings - * @{ - */ -/** - * @brief Configure the SDA setup, hold time and the SCL high, low period. - * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. - * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. - (tscldel = (SCLDEL+1)xtpresc) - * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. - (tsdadel = SDADELxtpresc) - * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. - (tsclh = (SCLH+1)xtpresc) - * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. - (tscll = (SCLL+1)xtpresc) - * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF - */ -#define __LL_FMPI2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ - ((((uint32_t)(__PRESCALER__) << FMPI2C_TIMINGR_PRESC_Pos) & FMPI2C_TIMINGR_PRESC) | \ - (((uint32_t)(__SETUP_TIME__) << FMPI2C_TIMINGR_SCLDEL_Pos) & FMPI2C_TIMINGR_SCLDEL) | \ - (((uint32_t)(__HOLD_TIME__) << FMPI2C_TIMINGR_SDADEL_Pos) & FMPI2C_TIMINGR_SDADEL) | \ - (((uint32_t)(__SCLH_PERIOD__) << FMPI2C_TIMINGR_SCLH_Pos) & FMPI2C_TIMINGR_SCLH) | \ - (((uint32_t)(__SCLL_PERIOD__) << FMPI2C_TIMINGR_SCLL_Pos) & FMPI2C_TIMINGR_SCLL)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FMPI2C_LL_Exported_Functions FMPI2C Exported Functions - * @{ - */ - -/** @defgroup FMPI2C_LL_EF_Configuration Configuration - * @{ - */ - -/** - * @brief Enable FMPI2C peripheral (PE = 1). - * @rmtoll CR1 PE LL_FMPI2C_Enable - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_Enable(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_PE); -} - -/** - * @brief Disable FMPI2C peripheral (PE = 0). - * @note When PE = 0, the FMPI2C SCL and SDA lines are released. - * Internal state machines and status bits are put back to their reset value. - * When cleared, PE must be kept low for at least 3 APB clock cycles. - * @rmtoll CR1 PE LL_FMPI2C_Disable - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_Disable(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_PE); -} - -/** - * @brief Check if the FMPI2C peripheral is enabled or disabled. - * @rmtoll CR1 PE LL_FMPI2C_IsEnabled - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabled(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_PE) == (FMPI2C_CR1_PE)) ? 1UL : 0UL); -} - -/** - * @brief Configure Noise Filters (Analog and Digital). - * @note If the analog filter is also enabled, the digital filter is added to analog filter. - * The filters can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll CR1 ANFOFF LL_FMPI2C_ConfigFilters\n - * CR1 DNF LL_FMPI2C_ConfigFilters - * @param FMPI2Cx FMPI2C Instance. - * @param AnalogFilter This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_ANALOGFILTER_ENABLE - * @arg @ref LL_FMPI2C_ANALOGFILTER_DISABLE - * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) - and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*tfmpi2cclk). - * This parameter is used to configure the digital noise filter on SDA and SCL input. - * The digital filter will filter spikes with a length of up to DNF[3:0]*tfmpi2cclk. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ConfigFilters(FMPI2C_TypeDef *FMPI2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) -{ - MODIFY_REG(FMPI2Cx->CR1, FMPI2C_CR1_ANFOFF | FMPI2C_CR1_DNF, AnalogFilter | (DigitalFilter << FMPI2C_CR1_DNF_Pos)); -} - -/** - * @brief Configure Digital Noise Filter. - * @note If the analog filter is also enabled, the digital filter is added to analog filter. - * This filter can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll CR1 DNF LL_FMPI2C_SetDigitalFilter - * @param FMPI2Cx FMPI2C Instance. - * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) - and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*tfmpi2cclk). - * This parameter is used to configure the digital noise filter on SDA and SCL input. - * The digital filter will filter spikes with a length of up to DNF[3:0]*tfmpi2cclk. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetDigitalFilter(FMPI2C_TypeDef *FMPI2Cx, uint32_t DigitalFilter) -{ - MODIFY_REG(FMPI2Cx->CR1, FMPI2C_CR1_DNF, DigitalFilter << FMPI2C_CR1_DNF_Pos); -} - -/** - * @brief Get the current Digital Noise Filter configuration. - * @rmtoll CR1 DNF LL_FMPI2C_GetDigitalFilter - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetDigitalFilter(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_DNF) >> FMPI2C_CR1_DNF_Pos); -} - -/** - * @brief Enable Analog Noise Filter. - * @note This filter can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll CR1 ANFOFF LL_FMPI2C_EnableAnalogFilter - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableAnalogFilter(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ANFOFF); -} - -/** - * @brief Disable Analog Noise Filter. - * @note This filter can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll CR1 ANFOFF LL_FMPI2C_DisableAnalogFilter - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableAnalogFilter(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ANFOFF); -} - -/** - * @brief Check if Analog Noise Filter is enabled or disabled. - * @rmtoll CR1 ANFOFF LL_FMPI2C_IsEnabledAnalogFilter - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledAnalogFilter(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ANFOFF) != (FMPI2C_CR1_ANFOFF)) ? 1UL : 0UL); -} - -/** - * @brief Enable DMA transmission requests. - * @rmtoll CR1 TXDMAEN LL_FMPI2C_EnableDMAReq_TX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableDMAReq_TX(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TXDMAEN); -} - -/** - * @brief Disable DMA transmission requests. - * @rmtoll CR1 TXDMAEN LL_FMPI2C_DisableDMAReq_TX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableDMAReq_TX(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TXDMAEN); -} - -/** - * @brief Check if DMA transmission requests are enabled or disabled. - * @rmtoll CR1 TXDMAEN LL_FMPI2C_IsEnabledDMAReq_TX - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledDMAReq_TX(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TXDMAEN) == (FMPI2C_CR1_TXDMAEN)) ? 1UL : 0UL); -} - -/** - * @brief Enable DMA reception requests. - * @rmtoll CR1 RXDMAEN LL_FMPI2C_EnableDMAReq_RX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableDMAReq_RX(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_RXDMAEN); -} - -/** - * @brief Disable DMA reception requests. - * @rmtoll CR1 RXDMAEN LL_FMPI2C_DisableDMAReq_RX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableDMAReq_RX(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_RXDMAEN); -} - -/** - * @brief Check if DMA reception requests are enabled or disabled. - * @rmtoll CR1 RXDMAEN LL_FMPI2C_IsEnabledDMAReq_RX - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledDMAReq_RX(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_RXDMAEN) == (FMPI2C_CR1_RXDMAEN)) ? 1UL : 0UL); -} - -/** - * @brief Get the data register address used for DMA transfer - * @rmtoll TXDR TXDATA LL_FMPI2C_DMA_GetRegAddr\n - * RXDR RXDATA LL_FMPI2C_DMA_GetRegAddr - * @param FMPI2Cx FMPI2C Instance - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_DMA_REG_DATA_TRANSMIT - * @arg @ref LL_FMPI2C_DMA_REG_DATA_RECEIVE - * @retval Address of data register - */ -__STATIC_INLINE uint32_t LL_FMPI2C_DMA_GetRegAddr(FMPI2C_TypeDef *FMPI2Cx, uint32_t Direction) -{ - uint32_t data_reg_addr; - - if (Direction == LL_FMPI2C_DMA_REG_DATA_TRANSMIT) - { - /* return address of TXDR register */ - data_reg_addr = (uint32_t) &(FMPI2Cx->TXDR); - } - else - { - /* return address of RXDR register */ - data_reg_addr = (uint32_t) &(FMPI2Cx->RXDR); - } - - return data_reg_addr; -} - -/** - * @brief Enable Clock stretching. - * @note This bit can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll CR1 NOSTRETCH LL_FMPI2C_EnableClockStretching - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableClockStretching(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_NOSTRETCH); -} - -/** - * @brief Disable Clock stretching. - * @note This bit can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll CR1 NOSTRETCH LL_FMPI2C_DisableClockStretching - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableClockStretching(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_NOSTRETCH); -} - -/** - * @brief Check if Clock stretching is enabled or disabled. - * @rmtoll CR1 NOSTRETCH LL_FMPI2C_IsEnabledClockStretching - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledClockStretching(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_NOSTRETCH) != (FMPI2C_CR1_NOSTRETCH)) ? 1UL : 0UL); -} - -/** - * @brief Enable hardware byte control in slave mode. - * @rmtoll CR1 SBC LL_FMPI2C_EnableSlaveByteControl - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableSlaveByteControl(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_SBC); -} - -/** - * @brief Disable hardware byte control in slave mode. - * @rmtoll CR1 SBC LL_FMPI2C_DisableSlaveByteControl - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableSlaveByteControl(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_SBC); -} - -/** - * @brief Check if hardware byte control in slave mode is enabled or disabled. - * @rmtoll CR1 SBC LL_FMPI2C_IsEnabledSlaveByteControl - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledSlaveByteControl(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_SBC) == (FMPI2C_CR1_SBC)) ? 1UL : 0UL); -} - -/** - * @brief Enable General Call. - * @note When enabled the Address 0x00 is ACKed. - * @rmtoll CR1 GCEN LL_FMPI2C_EnableGeneralCall - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableGeneralCall(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_GCEN); -} - -/** - * @brief Disable General Call. - * @note When disabled the Address 0x00 is NACKed. - * @rmtoll CR1 GCEN LL_FMPI2C_DisableGeneralCall - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableGeneralCall(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_GCEN); -} - -/** - * @brief Check if General Call is enabled or disabled. - * @rmtoll CR1 GCEN LL_FMPI2C_IsEnabledGeneralCall - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledGeneralCall(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_GCEN) == (FMPI2C_CR1_GCEN)) ? 1UL : 0UL); -} - -/** - * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. - * @note Changing this bit is not allowed, when the START bit is set. - * @rmtoll CR2 ADD10 LL_FMPI2C_SetMasterAddressingMode - * @param FMPI2Cx FMPI2C Instance. - * @param AddressingMode This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_ADDRESSING_MODE_7BIT - * @arg @ref LL_FMPI2C_ADDRESSING_MODE_10BIT - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetMasterAddressingMode(FMPI2C_TypeDef *FMPI2Cx, uint32_t AddressingMode) -{ - MODIFY_REG(FMPI2Cx->CR2, FMPI2C_CR2_ADD10, AddressingMode); -} - -/** - * @brief Get the Master addressing mode. - * @rmtoll CR2 ADD10 LL_FMPI2C_GetMasterAddressingMode - * @param FMPI2Cx FMPI2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_FMPI2C_ADDRESSING_MODE_7BIT - * @arg @ref LL_FMPI2C_ADDRESSING_MODE_10BIT - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetMasterAddressingMode(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_ADD10)); -} - -/** - * @brief Set the Own Address1. - * @rmtoll OAR1 OA1 LL_FMPI2C_SetOwnAddress1\n - * OAR1 OA1MODE LL_FMPI2C_SetOwnAddress1 - * @param FMPI2Cx FMPI2C Instance. - * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. - * @param OwnAddrSize This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_OWNADDRESS1_7BIT - * @arg @ref LL_FMPI2C_OWNADDRESS1_10BIT - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetOwnAddress1(FMPI2C_TypeDef *FMPI2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) -{ - MODIFY_REG(FMPI2Cx->OAR1, FMPI2C_OAR1_OA1 | FMPI2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); -} - -/** - * @brief Enable acknowledge on Own Address1 match address. - * @rmtoll OAR1 OA1EN LL_FMPI2C_EnableOwnAddress1 - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableOwnAddress1(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->OAR1, FMPI2C_OAR1_OA1EN); -} - -/** - * @brief Disable acknowledge on Own Address1 match address. - * @rmtoll OAR1 OA1EN LL_FMPI2C_DisableOwnAddress1 - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableOwnAddress1(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->OAR1, FMPI2C_OAR1_OA1EN); -} - -/** - * @brief Check if Own Address1 acknowledge is enabled or disabled. - * @rmtoll OAR1 OA1EN LL_FMPI2C_IsEnabledOwnAddress1 - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledOwnAddress1(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->OAR1, FMPI2C_OAR1_OA1EN) == (FMPI2C_OAR1_OA1EN)) ? 1UL : 0UL); -} - -/** - * @brief Set the 7bits Own Address2. - * @note This action has no effect if own address2 is enabled. - * @rmtoll OAR2 OA2 LL_FMPI2C_SetOwnAddress2\n - * OAR2 OA2MSK LL_FMPI2C_SetOwnAddress2 - * @param FMPI2Cx FMPI2C Instance. - * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. - * @param OwnAddrMask This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_OWNADDRESS2_NOMASK - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK01 - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK02 - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK03 - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK04 - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK05 - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK06 - * @arg @ref LL_FMPI2C_OWNADDRESS2_MASK07 - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetOwnAddress2(FMPI2C_TypeDef *FMPI2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) -{ - MODIFY_REG(FMPI2Cx->OAR2, FMPI2C_OAR2_OA2 | FMPI2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); -} - -/** - * @brief Enable acknowledge on Own Address2 match address. - * @rmtoll OAR2 OA2EN LL_FMPI2C_EnableOwnAddress2 - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableOwnAddress2(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->OAR2, FMPI2C_OAR2_OA2EN); -} - -/** - * @brief Disable acknowledge on Own Address2 match address. - * @rmtoll OAR2 OA2EN LL_FMPI2C_DisableOwnAddress2 - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableOwnAddress2(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->OAR2, FMPI2C_OAR2_OA2EN); -} - -/** - * @brief Check if Own Address1 acknowledge is enabled or disabled. - * @rmtoll OAR2 OA2EN LL_FMPI2C_IsEnabledOwnAddress2 - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledOwnAddress2(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->OAR2, FMPI2C_OAR2_OA2EN) == (FMPI2C_OAR2_OA2EN)) ? 1UL : 0UL); -} - -/** - * @brief Configure the SDA setup, hold time and the SCL high, low period. - * @note This bit can only be programmed when the FMPI2C is disabled (PE = 0). - * @rmtoll TIMINGR TIMINGR LL_FMPI2C_SetTiming - * @param FMPI2Cx FMPI2C Instance. - * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. - * @note This parameter is computed with the STM32CubeMX Tool. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetTiming(FMPI2C_TypeDef *FMPI2Cx, uint32_t Timing) -{ - WRITE_REG(FMPI2Cx->TIMINGR, Timing); -} - -/** - * @brief Get the Timing Prescaler setting. - * @rmtoll TIMINGR PRESC LL_FMPI2C_GetTimingPrescaler - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetTimingPrescaler(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMINGR, FMPI2C_TIMINGR_PRESC) >> FMPI2C_TIMINGR_PRESC_Pos); -} - -/** - * @brief Get the SCL low period setting. - * @rmtoll TIMINGR SCLL LL_FMPI2C_GetClockLowPeriod - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetClockLowPeriod(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMINGR, FMPI2C_TIMINGR_SCLL) >> FMPI2C_TIMINGR_SCLL_Pos); -} - -/** - * @brief Get the SCL high period setting. - * @rmtoll TIMINGR SCLH LL_FMPI2C_GetClockHighPeriod - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetClockHighPeriod(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMINGR, FMPI2C_TIMINGR_SCLH) >> FMPI2C_TIMINGR_SCLH_Pos); -} - -/** - * @brief Get the SDA hold time. - * @rmtoll TIMINGR SDADEL LL_FMPI2C_GetDataHoldTime - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetDataHoldTime(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMINGR, FMPI2C_TIMINGR_SDADEL) >> FMPI2C_TIMINGR_SDADEL_Pos); -} - -/** - * @brief Get the SDA setup time. - * @rmtoll TIMINGR SCLDEL LL_FMPI2C_GetDataSetupTime - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetDataSetupTime(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMINGR, FMPI2C_TIMINGR_SCLDEL) >> FMPI2C_TIMINGR_SCLDEL_Pos); -} - -/** - * @brief Configure peripheral mode. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR1 SMBHEN LL_FMPI2C_SetMode\n - * CR1 SMBDEN LL_FMPI2C_SetMode - * @param FMPI2Cx FMPI2C Instance. - * @param PeripheralMode This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_MODE_I2C - * @arg @ref LL_FMPI2C_MODE_SMBUS_HOST - * @arg @ref LL_FMPI2C_MODE_SMBUS_DEVICE - * @arg @ref LL_FMPI2C_MODE_SMBUS_DEVICE_ARP - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetMode(FMPI2C_TypeDef *FMPI2Cx, uint32_t PeripheralMode) -{ - MODIFY_REG(FMPI2Cx->CR1, FMPI2C_CR1_SMBHEN | FMPI2C_CR1_SMBDEN, PeripheralMode); -} - -/** - * @brief Get peripheral mode. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR1 SMBHEN LL_FMPI2C_GetMode\n - * CR1 SMBDEN LL_FMPI2C_GetMode - * @param FMPI2Cx FMPI2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_FMPI2C_MODE_I2C - * @arg @ref LL_FMPI2C_MODE_SMBUS_HOST - * @arg @ref LL_FMPI2C_MODE_SMBUS_DEVICE - * @arg @ref LL_FMPI2C_MODE_SMBUS_DEVICE_ARP - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetMode(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_SMBHEN | FMPI2C_CR1_SMBDEN)); -} - -/** - * @brief Enable SMBus alert (Host or Device mode) - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note SMBus Device mode: - * - SMBus Alert pin is drived low and - * Alert Response Address Header acknowledge is enabled. - * SMBus Host mode: - * - SMBus Alert pin management is supported. - * @rmtoll CR1 ALERTEN LL_FMPI2C_EnableSMBusAlert - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableSMBusAlert(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ALERTEN); -} - -/** - * @brief Disable SMBus alert (Host or Device mode) - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note SMBus Device mode: - * - SMBus Alert pin is not drived (can be used as a standard GPIO) and - * Alert Response Address Header acknowledge is disabled. - * SMBus Host mode: - * - SMBus Alert pin management is not supported. - * @rmtoll CR1 ALERTEN LL_FMPI2C_DisableSMBusAlert - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableSMBusAlert(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ALERTEN); -} - -/** - * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR1 ALERTEN LL_FMPI2C_IsEnabledSMBusAlert - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledSMBusAlert(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ALERTEN) == (FMPI2C_CR1_ALERTEN)) ? 1UL : 0UL); -} - -/** - * @brief Enable SMBus Packet Error Calculation (PEC). - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR1 PECEN LL_FMPI2C_EnableSMBusPEC - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableSMBusPEC(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_PECEN); -} - -/** - * @brief Disable SMBus Packet Error Calculation (PEC). - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR1 PECEN LL_FMPI2C_DisableSMBusPEC - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableSMBusPEC(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_PECEN); -} - -/** - * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR1 PECEN LL_FMPI2C_IsEnabledSMBusPEC - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledSMBusPEC(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_PECEN) == (FMPI2C_CR1_PECEN)) ? 1UL : 0UL); -} - -/** - * @brief Configure the SMBus Clock Timeout. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). - * @rmtoll TIMEOUTR TIMEOUTA LL_FMPI2C_ConfigSMBusTimeout\n - * TIMEOUTR TIDLE LL_FMPI2C_ConfigSMBusTimeout\n - * TIMEOUTR TIMEOUTB LL_FMPI2C_ConfigSMBusTimeout - * @param FMPI2Cx FMPI2C Instance. - * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. - * @param TimeoutAMode This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SCL_LOW - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH - * @param TimeoutB - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ConfigSMBusTimeout(FMPI2C_TypeDef *FMPI2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, - uint32_t TimeoutB) -{ - MODIFY_REG(FMPI2Cx->TIMEOUTR, FMPI2C_TIMEOUTR_TIMEOUTA | FMPI2C_TIMEOUTR_TIDLE | FMPI2C_TIMEOUTR_TIMEOUTB, - TimeoutA | TimeoutAMode | (TimeoutB << FMPI2C_TIMEOUTR_TIMEOUTB_Pos)); -} - -/** - * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note These bits can only be programmed when TimeoutA is disabled. - * @rmtoll TIMEOUTR TIMEOUTA LL_FMPI2C_SetSMBusTimeoutA - * @param FMPI2Cx FMPI2C Instance. - * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetSMBusTimeoutA(FMPI2C_TypeDef *FMPI2Cx, uint32_t TimeoutA) -{ - WRITE_REG(FMPI2Cx->TIMEOUTR, TimeoutA); -} - -/** - * @brief Get the SMBus Clock TimeoutA setting. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll TIMEOUTR TIMEOUTA LL_FMPI2C_GetSMBusTimeoutA - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0 and Max_Data=0xFFF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetSMBusTimeoutA(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMEOUTR, FMPI2C_TIMEOUTR_TIMEOUTA)); -} - -/** - * @brief Set the SMBus Clock TimeoutA mode. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note This bit can only be programmed when TimeoutA is disabled. - * @rmtoll TIMEOUTR TIDLE LL_FMPI2C_SetSMBusTimeoutAMode - * @param FMPI2Cx FMPI2C Instance. - * @param TimeoutAMode This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SCL_LOW - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetSMBusTimeoutAMode(FMPI2C_TypeDef *FMPI2Cx, uint32_t TimeoutAMode) -{ - WRITE_REG(FMPI2Cx->TIMEOUTR, TimeoutAMode); -} - -/** - * @brief Get the SMBus Clock TimeoutA mode. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll TIMEOUTR TIDLE LL_FMPI2C_GetSMBusTimeoutAMode - * @param FMPI2Cx FMPI2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SCL_LOW - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetSMBusTimeoutAMode(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMEOUTR, FMPI2C_TIMEOUTR_TIDLE)); -} - -/** - * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note These bits can only be programmed when TimeoutB is disabled. - * @rmtoll TIMEOUTR TIMEOUTB LL_FMPI2C_SetSMBusTimeoutB - * @param FMPI2Cx FMPI2C Instance. - * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetSMBusTimeoutB(FMPI2C_TypeDef *FMPI2Cx, uint32_t TimeoutB) -{ - WRITE_REG(FMPI2Cx->TIMEOUTR, TimeoutB << FMPI2C_TIMEOUTR_TIMEOUTB_Pos); -} - -/** - * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll TIMEOUTR TIMEOUTB LL_FMPI2C_GetSMBusTimeoutB - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0 and Max_Data=0xFFF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetSMBusTimeoutB(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->TIMEOUTR, FMPI2C_TIMEOUTR_TIMEOUTB) >> FMPI2C_TIMEOUTR_TIMEOUTB_Pos); -} - -/** - * @brief Enable the SMBus Clock Timeout. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll TIMEOUTR TIMOUTEN LL_FMPI2C_EnableSMBusTimeout\n - * TIMEOUTR TEXTEN LL_FMPI2C_EnableSMBusTimeout - * @param FMPI2Cx FMPI2C Instance. - * @param ClockTimeout This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTB - * @arg @ref LL_FMPI2C_FMPSMBUS_ALL_TIMEOUT - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableSMBusTimeout(FMPI2C_TypeDef *FMPI2Cx, uint32_t ClockTimeout) -{ - SET_BIT(FMPI2Cx->TIMEOUTR, ClockTimeout); -} - -/** - * @brief Disable the SMBus Clock Timeout. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll TIMEOUTR TIMOUTEN LL_FMPI2C_DisableSMBusTimeout\n - * TIMEOUTR TEXTEN LL_FMPI2C_DisableSMBusTimeout - * @param FMPI2Cx FMPI2C Instance. - * @param ClockTimeout This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTB - * @arg @ref LL_FMPI2C_FMPSMBUS_ALL_TIMEOUT - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableSMBusTimeout(FMPI2C_TypeDef *FMPI2Cx, uint32_t ClockTimeout) -{ - CLEAR_BIT(FMPI2Cx->TIMEOUTR, ClockTimeout); -} - -/** - * @brief Check if the SMBus Clock Timeout is enabled or disabled. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll TIMEOUTR TIMOUTEN LL_FMPI2C_IsEnabledSMBusTimeout\n - * TIMEOUTR TEXTEN LL_FMPI2C_IsEnabledSMBusTimeout - * @param FMPI2Cx FMPI2C Instance. - * @param ClockTimeout This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTA - * @arg @ref LL_FMPI2C_FMPSMBUS_TIMEOUTB - * @arg @ref LL_FMPI2C_FMPSMBUS_ALL_TIMEOUT - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledSMBusTimeout(FMPI2C_TypeDef *FMPI2Cx, uint32_t ClockTimeout) -{ - return ((READ_BIT(FMPI2Cx->TIMEOUTR, (FMPI2C_TIMEOUTR_TIMOUTEN | FMPI2C_TIMEOUTR_TEXTEN)) == \ - (ClockTimeout)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable TXIS interrupt. - * @rmtoll CR1 TXIE LL_FMPI2C_EnableIT_TX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_TX(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TXIE); -} - -/** - * @brief Disable TXIS interrupt. - * @rmtoll CR1 TXIE LL_FMPI2C_DisableIT_TX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_TX(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TXIE); -} - -/** - * @brief Check if the TXIS Interrupt is enabled or disabled. - * @rmtoll CR1 TXIE LL_FMPI2C_IsEnabledIT_TX - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_TX(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TXIE) == (FMPI2C_CR1_TXIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable RXNE interrupt. - * @rmtoll CR1 RXIE LL_FMPI2C_EnableIT_RX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_RX(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_RXIE); -} - -/** - * @brief Disable RXNE interrupt. - * @rmtoll CR1 RXIE LL_FMPI2C_DisableIT_RX - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_RX(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_RXIE); -} - -/** - * @brief Check if the RXNE Interrupt is enabled or disabled. - * @rmtoll CR1 RXIE LL_FMPI2C_IsEnabledIT_RX - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_RX(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_RXIE) == (FMPI2C_CR1_RXIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable Address match interrupt (slave mode only). - * @rmtoll CR1 ADDRIE LL_FMPI2C_EnableIT_ADDR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_ADDR(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ADDRIE); -} - -/** - * @brief Disable Address match interrupt (slave mode only). - * @rmtoll CR1 ADDRIE LL_FMPI2C_DisableIT_ADDR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_ADDR(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ADDRIE); -} - -/** - * @brief Check if Address match interrupt is enabled or disabled. - * @rmtoll CR1 ADDRIE LL_FMPI2C_IsEnabledIT_ADDR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_ADDR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ADDRIE) == (FMPI2C_CR1_ADDRIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable Not acknowledge received interrupt. - * @rmtoll CR1 NACKIE LL_FMPI2C_EnableIT_NACK - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_NACK(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_NACKIE); -} - -/** - * @brief Disable Not acknowledge received interrupt. - * @rmtoll CR1 NACKIE LL_FMPI2C_DisableIT_NACK - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_NACK(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_NACKIE); -} - -/** - * @brief Check if Not acknowledge received interrupt is enabled or disabled. - * @rmtoll CR1 NACKIE LL_FMPI2C_IsEnabledIT_NACK - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_NACK(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_NACKIE) == (FMPI2C_CR1_NACKIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable STOP detection interrupt. - * @rmtoll CR1 STOPIE LL_FMPI2C_EnableIT_STOP - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_STOP(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_STOPIE); -} - -/** - * @brief Disable STOP detection interrupt. - * @rmtoll CR1 STOPIE LL_FMPI2C_DisableIT_STOP - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_STOP(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_STOPIE); -} - -/** - * @brief Check if STOP detection interrupt is enabled or disabled. - * @rmtoll CR1 STOPIE LL_FMPI2C_IsEnabledIT_STOP - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_STOP(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_STOPIE) == (FMPI2C_CR1_STOPIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable Transfer Complete interrupt. - * @note Any of these events will generate interrupt : - * Transfer Complete (TC) - * Transfer Complete Reload (TCR) - * @rmtoll CR1 TCIE LL_FMPI2C_EnableIT_TC - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_TC(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TCIE); -} - -/** - * @brief Disable Transfer Complete interrupt. - * @note Any of these events will generate interrupt : - * Transfer Complete (TC) - * Transfer Complete Reload (TCR) - * @rmtoll CR1 TCIE LL_FMPI2C_DisableIT_TC - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_TC(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TCIE); -} - -/** - * @brief Check if Transfer Complete interrupt is enabled or disabled. - * @rmtoll CR1 TCIE LL_FMPI2C_IsEnabledIT_TC - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_TC(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_TCIE) == (FMPI2C_CR1_TCIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable Error interrupts. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note Any of these errors will generate interrupt : - * Arbitration Loss (ARLO) - * Bus Error detection (BERR) - * Overrun/Underrun (OVR) - * SMBus Timeout detection (TIMEOUT) - * SMBus PEC error detection (PECERR) - * SMBus Alert pin event detection (ALERT) - * @rmtoll CR1 ERRIE LL_FMPI2C_EnableIT_ERR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableIT_ERR(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ERRIE); -} - -/** - * @brief Disable Error interrupts. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note Any of these errors will generate interrupt : - * Arbitration Loss (ARLO) - * Bus Error detection (BERR) - * Overrun/Underrun (OVR) - * SMBus Timeout detection (TIMEOUT) - * SMBus PEC error detection (PECERR) - * SMBus Alert pin event detection (ALERT) - * @rmtoll CR1 ERRIE LL_FMPI2C_DisableIT_ERR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableIT_ERR(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ERRIE); -} - -/** - * @brief Check if Error interrupts are enabled or disabled. - * @rmtoll CR1 ERRIE LL_FMPI2C_IsEnabledIT_ERR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledIT_ERR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR1, FMPI2C_CR1_ERRIE) == (FMPI2C_CR1_ERRIE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EF_FLAG_management FLAG_management - * @{ - */ - -/** - * @brief Indicate the status of Transmit data register empty flag. - * @note RESET: When next data is written in Transmit data register. - * SET: When Transmit data register is empty. - * @rmtoll ISR TXE LL_FMPI2C_IsActiveFlag_TXE - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_TXE(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_TXE) == (FMPI2C_ISR_TXE)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Transmit interrupt flag. - * @note RESET: When next data is written in Transmit data register. - * SET: When Transmit data register is empty. - * @rmtoll ISR TXIS LL_FMPI2C_IsActiveFlag_TXIS - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_TXIS(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_TXIS) == (FMPI2C_ISR_TXIS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Receive data register not empty flag. - * @note RESET: When Receive data register is read. - * SET: When the received data is copied in Receive data register. - * @rmtoll ISR RXNE LL_FMPI2C_IsActiveFlag_RXNE - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_RXNE(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_RXNE) == (FMPI2C_ISR_RXNE)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Address matched flag (slave mode). - * @note RESET: Clear default value. - * SET: When the received slave address matched with one of the enabled slave address. - * @rmtoll ISR ADDR LL_FMPI2C_IsActiveFlag_ADDR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_ADDR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_ADDR) == (FMPI2C_ISR_ADDR)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Not Acknowledge received flag. - * @note RESET: Clear default value. - * SET: When a NACK is received after a byte transmission. - * @rmtoll ISR NACKF LL_FMPI2C_IsActiveFlag_NACK - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_NACK(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_NACKF) == (FMPI2C_ISR_NACKF)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Stop detection flag. - * @note RESET: Clear default value. - * SET: When a Stop condition is detected. - * @rmtoll ISR STOPF LL_FMPI2C_IsActiveFlag_STOP - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_STOP(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_STOPF) == (FMPI2C_ISR_STOPF)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Transfer complete flag (master mode). - * @note RESET: Clear default value. - * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. - * @rmtoll ISR TC LL_FMPI2C_IsActiveFlag_TC - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_TC(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_TC) == (FMPI2C_ISR_TC)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Transfer complete flag (master mode). - * @note RESET: Clear default value. - * SET: When RELOAD=1 and NBYTES date have been transferred. - * @rmtoll ISR TCR LL_FMPI2C_IsActiveFlag_TCR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_TCR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_TCR) == (FMPI2C_ISR_TCR)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Bus error flag. - * @note RESET: Clear default value. - * SET: When a misplaced Start or Stop condition is detected. - * @rmtoll ISR BERR LL_FMPI2C_IsActiveFlag_BERR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_BERR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_BERR) == (FMPI2C_ISR_BERR)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Arbitration lost flag. - * @note RESET: Clear default value. - * SET: When arbitration lost. - * @rmtoll ISR ARLO LL_FMPI2C_IsActiveFlag_ARLO - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_ARLO(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_ARLO) == (FMPI2C_ISR_ARLO)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Overrun/Underrun flag (slave mode). - * @note RESET: Clear default value. - * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). - * @rmtoll ISR OVR LL_FMPI2C_IsActiveFlag_OVR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_OVR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_OVR) == (FMPI2C_ISR_OVR)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of SMBus PEC error flag in reception. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note RESET: Clear default value. - * SET: When the received PEC does not match with the PEC register content. - * @rmtoll ISR PECERR LL_FMPI2C_IsActiveSMBusFlag_PECERR - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveSMBusFlag_PECERR(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_PECERR) == (FMPI2C_ISR_PECERR)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of SMBus Timeout detection flag. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note RESET: Clear default value. - * SET: When a timeout or extended clock timeout occurs. - * @rmtoll ISR TIMEOUT LL_FMPI2C_IsActiveSMBusFlag_TIMEOUT - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveSMBusFlag_TIMEOUT(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_TIMEOUT) == (FMPI2C_ISR_TIMEOUT)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of SMBus alert flag. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note RESET: Clear default value. - * SET: When SMBus host configuration, SMBus alert enabled and - * a falling edge event occurs on SMBA pin. - * @rmtoll ISR ALERT LL_FMPI2C_IsActiveSMBusFlag_ALERT - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveSMBusFlag_ALERT(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_ALERT) == (FMPI2C_ISR_ALERT)) ? 1UL : 0UL); -} - -/** - * @brief Indicate the status of Bus Busy flag. - * @note RESET: Clear default value. - * SET: When a Start condition is detected. - * @rmtoll ISR BUSY LL_FMPI2C_IsActiveFlag_BUSY - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsActiveFlag_BUSY(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_BUSY) == (FMPI2C_ISR_BUSY)) ? 1UL : 0UL); -} - -/** - * @brief Clear Address Matched flag. - * @rmtoll ICR ADDRCF LL_FMPI2C_ClearFlag_ADDR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_ADDR(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_ADDRCF); -} - -/** - * @brief Clear Not Acknowledge flag. - * @rmtoll ICR NACKCF LL_FMPI2C_ClearFlag_NACK - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_NACK(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_NACKCF); -} - -/** - * @brief Clear Stop detection flag. - * @rmtoll ICR STOPCF LL_FMPI2C_ClearFlag_STOP - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_STOP(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_STOPCF); -} - -/** - * @brief Clear Transmit data register empty flag (TXE). - * @note This bit can be clear by software in order to flush the transmit data register (TXDR). - * @rmtoll ISR TXE LL_FMPI2C_ClearFlag_TXE - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_TXE(FMPI2C_TypeDef *FMPI2Cx) -{ - WRITE_REG(FMPI2Cx->ISR, FMPI2C_ISR_TXE); -} - -/** - * @brief Clear Bus error flag. - * @rmtoll ICR BERRCF LL_FMPI2C_ClearFlag_BERR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_BERR(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_BERRCF); -} - -/** - * @brief Clear Arbitration lost flag. - * @rmtoll ICR ARLOCF LL_FMPI2C_ClearFlag_ARLO - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_ARLO(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_ARLOCF); -} - -/** - * @brief Clear Overrun/Underrun flag. - * @rmtoll ICR OVRCF LL_FMPI2C_ClearFlag_OVR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearFlag_OVR(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_OVRCF); -} - -/** - * @brief Clear SMBus PEC error flag. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll ICR PECCF LL_FMPI2C_ClearSMBusFlag_PECERR - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearSMBusFlag_PECERR(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_PECCF); -} - -/** - * @brief Clear SMBus Timeout detection flag. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll ICR TIMOUTCF LL_FMPI2C_ClearSMBusFlag_TIMEOUT - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearSMBusFlag_TIMEOUT(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_TIMOUTCF); -} - -/** - * @brief Clear SMBus Alert flag. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll ICR ALERTCF LL_FMPI2C_ClearSMBusFlag_ALERT - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_ClearSMBusFlag_ALERT(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->ICR, FMPI2C_ICR_ALERTCF); -} - -/** - * @} - */ - -/** @defgroup FMPI2C_LL_EF_Data_Management Data_Management - * @{ - */ - -/** - * @brief Enable automatic STOP condition generation (master mode). - * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. - * This bit has no effect in slave mode or when RELOAD bit is set. - * @rmtoll CR2 AUTOEND LL_FMPI2C_EnableAutoEndMode - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableAutoEndMode(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR2, FMPI2C_CR2_AUTOEND); -} - -/** - * @brief Disable automatic STOP condition generation (master mode). - * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. - * @rmtoll CR2 AUTOEND LL_FMPI2C_DisableAutoEndMode - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableAutoEndMode(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR2, FMPI2C_CR2_AUTOEND); -} - -/** - * @brief Check if automatic STOP condition is enabled or disabled. - * @rmtoll CR2 AUTOEND LL_FMPI2C_IsEnabledAutoEndMode - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledAutoEndMode(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_AUTOEND) == (FMPI2C_CR2_AUTOEND)) ? 1UL : 0UL); -} - -/** - * @brief Enable reload mode (master mode). - * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. - * @rmtoll CR2 RELOAD LL_FMPI2C_EnableReloadMode - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableReloadMode(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR2, FMPI2C_CR2_RELOAD); -} - -/** - * @brief Disable reload mode (master mode). - * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). - * @rmtoll CR2 RELOAD LL_FMPI2C_DisableReloadMode - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableReloadMode(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR2, FMPI2C_CR2_RELOAD); -} - -/** - * @brief Check if reload mode is enabled or disabled. - * @rmtoll CR2 RELOAD LL_FMPI2C_IsEnabledReloadMode - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledReloadMode(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_RELOAD) == (FMPI2C_CR2_RELOAD)) ? 1UL : 0UL); -} - -/** - * @brief Configure the number of bytes for transfer. - * @note Changing these bits when START bit is set is not allowed. - * @rmtoll CR2 NBYTES LL_FMPI2C_SetTransferSize - * @param FMPI2Cx FMPI2C Instance. - * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetTransferSize(FMPI2C_TypeDef *FMPI2Cx, uint32_t TransferSize) -{ - MODIFY_REG(FMPI2Cx->CR2, FMPI2C_CR2_NBYTES, TransferSize << FMPI2C_CR2_NBYTES_Pos); -} - -/** - * @brief Get the number of bytes configured for transfer. - * @rmtoll CR2 NBYTES LL_FMPI2C_GetTransferSize - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetTransferSize(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_NBYTES) >> FMPI2C_CR2_NBYTES_Pos); -} - -/** - * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code - or next received byte. - * @note Usage in Slave mode only. - * @rmtoll CR2 NACK LL_FMPI2C_AcknowledgeNextData - * @param FMPI2Cx FMPI2C Instance. - * @param TypeAcknowledge This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_ACK - * @arg @ref LL_FMPI2C_NACK - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_AcknowledgeNextData(FMPI2C_TypeDef *FMPI2Cx, uint32_t TypeAcknowledge) -{ - MODIFY_REG(FMPI2Cx->CR2, FMPI2C_CR2_NACK, TypeAcknowledge); -} - -/** - * @brief Generate a START or RESTART condition - * @note The START bit can be set even if bus is BUSY or FMPI2C is in slave mode. - * This action has no effect when RELOAD is set. - * @rmtoll CR2 START LL_FMPI2C_GenerateStartCondition - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_GenerateStartCondition(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR2, FMPI2C_CR2_START); -} - -/** - * @brief Generate a STOP condition after the current byte transfer (master mode). - * @rmtoll CR2 STOP LL_FMPI2C_GenerateStopCondition - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_GenerateStopCondition(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR2, FMPI2C_CR2_STOP); -} - -/** - * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). - * @note The master sends the complete 10bit slave address read sequence : - * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address - in Read direction. - * @rmtoll CR2 HEAD10R LL_FMPI2C_EnableAuto10BitRead - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableAuto10BitRead(FMPI2C_TypeDef *FMPI2Cx) -{ - CLEAR_BIT(FMPI2Cx->CR2, FMPI2C_CR2_HEAD10R); -} - -/** - * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). - * @note The master only sends the first 7 bits of 10bit address in Read direction. - * @rmtoll CR2 HEAD10R LL_FMPI2C_DisableAuto10BitRead - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_DisableAuto10BitRead(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR2, FMPI2C_CR2_HEAD10R); -} - -/** - * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. - * @rmtoll CR2 HEAD10R LL_FMPI2C_IsEnabledAuto10BitRead - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledAuto10BitRead(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_HEAD10R) != (FMPI2C_CR2_HEAD10R)) ? 1UL : 0UL); -} - -/** - * @brief Configure the transfer direction (master mode). - * @note Changing these bits when START bit is set is not allowed. - * @rmtoll CR2 RD_WRN LL_FMPI2C_SetTransferRequest - * @param FMPI2Cx FMPI2C Instance. - * @param TransferRequest This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_REQUEST_WRITE - * @arg @ref LL_FMPI2C_REQUEST_READ - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetTransferRequest(FMPI2C_TypeDef *FMPI2Cx, uint32_t TransferRequest) -{ - MODIFY_REG(FMPI2Cx->CR2, FMPI2C_CR2_RD_WRN, TransferRequest); -} - -/** - * @brief Get the transfer direction requested (master mode). - * @rmtoll CR2 RD_WRN LL_FMPI2C_GetTransferRequest - * @param FMPI2Cx FMPI2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_FMPI2C_REQUEST_WRITE - * @arg @ref LL_FMPI2C_REQUEST_READ - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetTransferRequest(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_RD_WRN)); -} - -/** - * @brief Configure the slave address for transfer (master mode). - * @note Changing these bits when START bit is set is not allowed. - * @rmtoll CR2 SADD LL_FMPI2C_SetSlaveAddr - * @param FMPI2Cx FMPI2C Instance. - * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_SetSlaveAddr(FMPI2C_TypeDef *FMPI2Cx, uint32_t SlaveAddr) -{ - MODIFY_REG(FMPI2Cx->CR2, FMPI2C_CR2_SADD, SlaveAddr); -} - -/** - * @brief Get the slave address programmed for transfer. - * @rmtoll CR2 SADD LL_FMPI2C_GetSlaveAddr - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0x3F - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetSlaveAddr(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_SADD)); -} - -/** - * @brief Handles FMPI2Cx communication when starting transfer or during transfer (TC or TCR flag are set). - * @rmtoll CR2 SADD LL_FMPI2C_HandleTransfer\n - * CR2 ADD10 LL_FMPI2C_HandleTransfer\n - * CR2 RD_WRN LL_FMPI2C_HandleTransfer\n - * CR2 START LL_FMPI2C_HandleTransfer\n - * CR2 STOP LL_FMPI2C_HandleTransfer\n - * CR2 RELOAD LL_FMPI2C_HandleTransfer\n - * CR2 NBYTES LL_FMPI2C_HandleTransfer\n - * CR2 AUTOEND LL_FMPI2C_HandleTransfer\n - * CR2 HEAD10R LL_FMPI2C_HandleTransfer - * @param FMPI2Cx FMPI2C Instance. - * @param SlaveAddr Specifies the slave address to be programmed. - * @param SlaveAddrSize This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_ADDRSLAVE_7BIT - * @arg @ref LL_FMPI2C_ADDRSLAVE_10BIT - * @param TransferSize Specifies the number of bytes to be programmed. - * This parameter must be a value between Min_Data=0 and Max_Data=255. - * @param EndMode This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_MODE_RELOAD - * @arg @ref LL_FMPI2C_MODE_AUTOEND - * @arg @ref LL_FMPI2C_MODE_SOFTEND - * @arg @ref LL_FMPI2C_MODE_SMBUS_RELOAD - * @arg @ref LL_FMPI2C_MODE_SMBUS_AUTOEND_NO_PEC - * @arg @ref LL_FMPI2C_MODE_SMBUS_SOFTEND_NO_PEC - * @arg @ref LL_FMPI2C_MODE_SMBUS_AUTOEND_WITH_PEC - * @arg @ref LL_FMPI2C_MODE_SMBUS_SOFTEND_WITH_PEC - * @param Request This parameter can be one of the following values: - * @arg @ref LL_FMPI2C_GENERATE_NOSTARTSTOP - * @arg @ref LL_FMPI2C_GENERATE_STOP - * @arg @ref LL_FMPI2C_GENERATE_START_READ - * @arg @ref LL_FMPI2C_GENERATE_START_WRITE - * @arg @ref LL_FMPI2C_GENERATE_RESTART_7BIT_READ - * @arg @ref LL_FMPI2C_GENERATE_RESTART_7BIT_WRITE - * @arg @ref LL_FMPI2C_GENERATE_RESTART_10BIT_READ - * @arg @ref LL_FMPI2C_GENERATE_RESTART_10BIT_WRITE - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_HandleTransfer(FMPI2C_TypeDef *FMPI2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, - uint32_t TransferSize, uint32_t EndMode, uint32_t Request) -{ - MODIFY_REG(FMPI2Cx->CR2, FMPI2C_CR2_SADD | FMPI2C_CR2_ADD10 | - (FMPI2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - FMPI2C_CR2_RD_WRN_Pos))) | - FMPI2C_CR2_START | FMPI2C_CR2_STOP | FMPI2C_CR2_RELOAD | - FMPI2C_CR2_NBYTES | FMPI2C_CR2_AUTOEND | FMPI2C_CR2_HEAD10R, - SlaveAddr | SlaveAddrSize | (TransferSize << FMPI2C_CR2_NBYTES_Pos) | EndMode | Request); -} - -/** - * @brief Indicate the value of transfer direction (slave mode). - * @note RESET: Write transfer, Slave enters in receiver mode. - * SET: Read transfer, Slave enters in transmitter mode. - * @rmtoll ISR DIR LL_FMPI2C_GetTransferDirection - * @param FMPI2Cx FMPI2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_FMPI2C_DIRECTION_WRITE - * @arg @ref LL_FMPI2C_DIRECTION_READ - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetTransferDirection(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_DIR)); -} - -/** - * @brief Return the slave matched address. - * @rmtoll ISR ADDCODE LL_FMPI2C_GetAddressMatchCode - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x00 and Max_Data=0x3F - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetAddressMatchCode(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->ISR, FMPI2C_ISR_ADDCODE) >> FMPI2C_ISR_ADDCODE_Pos << 1); -} - -/** - * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition - or an Address Matched is received. - * This bit has no effect when RELOAD bit is set. - * This bit has no effect in device mode when SBC bit is not set. - * @rmtoll CR2 PECBYTE LL_FMPI2C_EnableSMBusPECCompare - * @param FMPI2Cx FMPI2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_EnableSMBusPECCompare(FMPI2C_TypeDef *FMPI2Cx) -{ - SET_BIT(FMPI2Cx->CR2, FMPI2C_CR2_PECBYTE); -} - -/** - * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll CR2 PECBYTE LL_FMPI2C_IsEnabledSMBusPECCompare - * @param FMPI2Cx FMPI2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FMPI2C_IsEnabledSMBusPECCompare(FMPI2C_TypeDef *FMPI2Cx) -{ - return ((READ_BIT(FMPI2Cx->CR2, FMPI2C_CR2_PECBYTE) == (FMPI2C_CR2_PECBYTE)) ? 1UL : 0UL); -} - -/** - * @brief Get the SMBus Packet Error byte calculated. - * @note The macro IS_FMPSMBUS_ALL_INSTANCE(FMPI2Cx) can be used to check whether or not - * SMBus feature is supported by the FMPI2Cx Instance. - * @rmtoll PECR PEC LL_FMPI2C_GetSMBusPEC - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_FMPI2C_GetSMBusPEC(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint32_t)(READ_BIT(FMPI2Cx->PECR, FMPI2C_PECR_PEC)); -} - -/** - * @brief Read Receive Data register. - * @rmtoll RXDR RXDATA LL_FMPI2C_ReceiveData8 - * @param FMPI2Cx FMPI2C Instance. - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint8_t LL_FMPI2C_ReceiveData8(FMPI2C_TypeDef *FMPI2Cx) -{ - return (uint8_t)(READ_BIT(FMPI2Cx->RXDR, FMPI2C_RXDR_RXDATA)); -} - -/** - * @brief Write in Transmit Data Register . - * @rmtoll TXDR TXDATA LL_FMPI2C_TransmitData8 - * @param FMPI2Cx FMPI2C Instance. - * @param Data Value between Min_Data=0x00 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_FMPI2C_TransmitData8(FMPI2C_TypeDef *FMPI2Cx, uint8_t Data) -{ - WRITE_REG(FMPI2Cx->TXDR, Data); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup FMPI2C_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_FMPI2C_Init(FMPI2C_TypeDef *FMPI2Cx, LL_FMPI2C_InitTypeDef *FMPI2C_InitStruct); -ErrorStatus LL_FMPI2C_DeInit(FMPI2C_TypeDef *FMPI2Cx); -void LL_FMPI2C_StructInit(LL_FMPI2C_InitTypeDef *FMPI2C_InitStruct); - - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C1 */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_LL_FMPI2C_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h deleted file mode 100644 index 6bee7fd..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h +++ /dev/null @@ -1,981 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_GPIO_H -#define __STM32F4xx_LL_GPIO_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) - -/** @defgroup GPIO_LL GPIO - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros - * @{ - */ - -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures - * @{ - */ - -/** - * @brief LL GPIO Init Structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_LL_EC_PIN */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_MODE. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_SPEED. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ - - uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ - - uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_PULL. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ - - uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_AF. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ -} LL_GPIO_InitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_LL_EC_PIN PIN - * @{ - */ -#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ -#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ -#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ -#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ -#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ -#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ -#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ -#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ -#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ -#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ -#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ -#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ -#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ -#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ -#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ -#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ -#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ - GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ - GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ - GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ - GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ - GPIO_BSRR_BS_15) /*!< Select all pins */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_MODE Mode - * @{ - */ -#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ -#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ -#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ -#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_OUTPUT Output Type - * @{ - */ -#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ -#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_SPEED Output Speed - * @{ - */ -#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ -#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ -#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ -#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down - * @{ - */ -#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ -#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ -#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_AF Alternate Function - * @{ - */ -#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ -#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ -#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ -#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ -#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ -#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ -#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ -#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ -#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ -#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ -#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ -#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ -#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ -#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ -#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ -#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in GPIO register - * @param __INSTANCE__ GPIO Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in GPIO register - * @param __INSTANCE__ GPIO Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration - * @{ - */ - -/** - * @brief Configure gpio mode for a dedicated pin on dedicated port. - * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll MODER MODEy LL_GPIO_SetPinMode - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_GPIO_MODE_INPUT - * @arg @ref LL_GPIO_MODE_OUTPUT - * @arg @ref LL_GPIO_MODE_ALTERNATE - * @arg @ref LL_GPIO_MODE_ANALOG - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) -{ - MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio mode for a dedicated pin on dedicated port. - * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll MODER MODEy LL_GPIO_GetPinMode - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_MODE_INPUT - * @arg @ref LL_GPIO_MODE_OUTPUT - * @arg @ref LL_GPIO_MODE_ALTERNATE - * @arg @ref LL_GPIO_MODE_ANALOG - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->MODER, - (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio output type for several pins on dedicated port. - * @note Output type as to be set when gpio pin is in output or - * alternate modes. Possible type are Push-pull or Open-drain. - * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @param OutputType This parameter can be one of the following values: - * @arg @ref LL_GPIO_OUTPUT_PUSHPULL - * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) -{ - MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); -} - -/** - * @brief Return gpio output type for several pins on dedicated port. - * @note Output type as to be set when gpio pin is in output or - * alternate modes. Possible type are Push-pull or Open-drain. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_OUTPUT_PUSHPULL - * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); -} - -/** - * @brief Configure gpio speed for a dedicated pin on dedicated port. - * @note I/O speed can be Low, Medium, Fast or High speed. - * @note Warning: only one pin can be passed as parameter. - * @note Refer to datasheet for frequency specifications and the power - * supply and load conditions for each speed. - * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Speed This parameter can be one of the following values: - * @arg @ref LL_GPIO_SPEED_FREQ_LOW - * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM - * @arg @ref LL_GPIO_SPEED_FREQ_HIGH - * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) -{ - MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), - (Speed << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio speed for a dedicated pin on dedicated port. - * @note I/O speed can be Low, Medium, Fast or High speed. - * @note Warning: only one pin can be passed as parameter. - * @note Refer to datasheet for frequency specifications and the power - * supply and load conditions for each speed. - * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_SPEED_FREQ_LOW - * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM - * @arg @ref LL_GPIO_SPEED_FREQ_HIGH - * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, - (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Pull This parameter can be one of the following values: - * @arg @ref LL_GPIO_PULL_NO - * @arg @ref LL_GPIO_PULL_UP - * @arg @ref LL_GPIO_PULL_DOWN - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) -{ - MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port - * @note Warning: only one pin can be passed as parameter. - * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_PULL_NO - * @arg @ref LL_GPIO_PULL_UP - * @arg @ref LL_GPIO_PULL_DOWN - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->PUPDR, - (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @param Alternate This parameter can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) -{ - MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), - (Alternate << (POSITION_VAL(Pin) * 4U))); -} - -/** - * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. - * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - */ -__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->AFR[0], - (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); -} - -/** - * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Alternate This parameter can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) -{ - MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), - (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); -} - -/** - * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - */ -__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->AFR[1], - (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); -} - - -/** - * @brief Lock configuration of several pins for a dedicated port. - * @note When the lock sequence has been applied on a port bit, the - * value of this port bit can no longer be modified until the - * next reset. - * @note Each lock bit freezes a specific configuration register - * (control and alternate function registers). - * @rmtoll LCKR LCKK LL_GPIO_LockPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - __IO uint32_t temp; - WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); - WRITE_REG(GPIOx->LCKR, PinMask); - WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); - temp = READ_REG(GPIOx->LCKR); - (void) temp; -} - -/** - * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. - * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); -} - -/** - * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. - * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked - * @param GPIOx GPIO Port - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) -{ - return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); -} - -/** - * @} - */ - -/** @defgroup GPIO_LL_EF_Data_Access Data Access - * @{ - */ - -/** - * @brief Return full input data register value for a dedicated port. - * @rmtoll IDR IDy LL_GPIO_ReadInputPort - * @param GPIOx GPIO Port - * @retval Input data register value of port - */ -__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) -{ - return (uint32_t)(READ_REG(GPIOx->IDR)); -} - -/** - * @brief Return if input data level for several pins of dedicated port is high or low. - * @rmtoll IDR IDy LL_GPIO_IsInputPinSet - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); -} - -/** - * @brief Write output data register for the port. - * @rmtoll ODR ODy LL_GPIO_WriteOutputPort - * @param GPIOx GPIO Port - * @param PortValue Level value for each pin of the port - * @retval None - */ -__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) -{ - WRITE_REG(GPIOx->ODR, PortValue); -} - -/** - * @brief Return full output data register value for a dedicated port. - * @rmtoll ODR ODy LL_GPIO_ReadOutputPort - * @param GPIOx GPIO Port - * @retval Output data register value of port - */ -__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) -{ - return (uint32_t)(READ_REG(GPIOx->ODR)); -} - -/** - * @brief Return if input data level for several pins of dedicated port is high or low. - * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); -} - -/** - * @brief Set several pins to high level on dedicated gpio port. - * @rmtoll BSRR BSy LL_GPIO_SetOutputPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - WRITE_REG(GPIOx->BSRR, PinMask); -} - -/** - * @brief Set several pins to low level on dedicated gpio port. - * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - WRITE_REG(GPIOx->BSRR, (PinMask << 16)); -} - -/** - * @brief Toggle data value for several pin of dedicated port. - * @rmtoll ODR ODy LL_GPIO_TogglePin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - uint32_t odr = READ_REG(GPIOx->ODR); - WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); -ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); -void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_GPIO_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_lptim.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_lptim.h deleted file mode 100644 index 9495e01..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_lptim.h +++ /dev/null @@ -1,1378 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_lptim.h - * @author MCD Application Team - * @brief Header file of LPTIM LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_LPTIM_H -#define STM32F4xx_LL_LPTIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (LPTIM1) - -/** @defgroup LPTIM_LL LPTIM - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup LPTIM_LL_Private_Macros LPTIM Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup LPTIM_LL_ES_INIT LPTIM Exported Init structure - * @{ - */ - -/** - * @brief LPTIM Init structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< Specifies the source of the clock used by the LPTIM instance. - This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE. - - This feature can be modified afterwards using unitary - function @ref LL_LPTIM_SetClockSource().*/ - - uint32_t Prescaler; /*!< Specifies the prescaler division ratio. - This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER. - - This feature can be modified afterwards using using unitary - function @ref LL_LPTIM_SetPrescaler().*/ - - uint32_t Waveform; /*!< Specifies the waveform shape. - This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM. - - This feature can be modified afterwards using unitary - function @ref LL_LPTIM_ConfigOutput().*/ - - uint32_t Polarity; /*!< Specifies waveform polarity. - This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_POLARITY. - - This feature can be modified afterwards using unitary - function @ref LL_LPTIM_ConfigOutput().*/ -} LL_LPTIM_InitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup LPTIM_LL_Exported_Constants LPTIM Exported Constants - * @{ - */ - -/** @defgroup LPTIM_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_LPTIM_ReadReg function - * @{ - */ -#define LL_LPTIM_ISR_CMPM LPTIM_ISR_CMPM /*!< Compare match */ -#define LL_LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK /*!< Compare register update OK */ -#define LL_LPTIM_ISR_ARRM LPTIM_ISR_ARRM /*!< Autoreload match */ -#define LL_LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG /*!< External trigger edge event */ -#define LL_LPTIM_ISR_ARROK LPTIM_ISR_ARROK /*!< Autoreload register update OK */ -#define LL_LPTIM_ISR_UP LPTIM_ISR_UP /*!< Counter direction change down to up */ -#define LL_LPTIM_ISR_DOWN LPTIM_ISR_DOWN /*!< Counter direction change up to down */ -/** - * @} - */ - -/** @defgroup LPTIM_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_LPTIM_ReadReg and LL_LPTIM_WriteReg functions - * @{ - */ -#define LL_LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE /*!< Compare match */ -#define LL_LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE /*!< Compare register update OK */ -#define LL_LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE /*!< Autoreload match */ -#define LL_LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE /*!< External trigger edge event */ -#define LL_LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE /*!< Autoreload register update OK */ -#define LL_LPTIM_IER_UPIE LPTIM_IER_UPIE /*!< Counter direction change down to up */ -#define LL_LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE /*!< Counter direction change up to down */ -/** - * @} - */ - -/** @defgroup LPTIM_LL_EC_OPERATING_MODE Operating Mode - * @{ - */ -#define LL_LPTIM_OPERATING_MODE_CONTINUOUS LPTIM_CR_CNTSTRT /*!__REG__, (__VALUE__)) - -/** - * @brief Read a value in LPTIM register - * @param __INSTANCE__ LPTIM Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup LPTIM_LL_Exported_Functions LPTIM Exported Functions - * @{ - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup LPTIM_LL_EF_Init Initialisation and deinitialisation functions - * @{ - */ - -ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx); -void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct); -ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_InitStruct); -void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx); -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** @defgroup LPTIM_LL_EF_LPTIM_Configuration LPTIM Configuration - * @{ - */ - -/** - * @brief Enable the LPTIM instance - * @note After setting the ENABLE bit, a delay of two counter clock is needed - * before the LPTIM instance is actually enabled. - * @rmtoll CR ENABLE LL_LPTIM_Enable - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_Enable(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->CR, LPTIM_CR_ENABLE); -} - -/** - * @brief Indicates whether the LPTIM instance is enabled. - * @rmtoll CR ENABLE LL_LPTIM_IsEnabled - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabled(LPTIM_TypeDef *const LPTIMx) -{ - return (((READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == LPTIM_CR_ENABLE) ? 1UL : 0UL)); -} - -/** - * @brief Starts the LPTIM counter in the desired mode. - * @note LPTIM instance must be enabled before starting the counter. - * @note It is possible to change on the fly from One Shot mode to - * Continuous mode. - * @rmtoll CR CNTSTRT LL_LPTIM_StartCounter\n - * CR SNGSTRT LL_LPTIM_StartCounter - * @param LPTIMx Low-Power Timer instance - * @param OperatingMode This parameter can be one of the following values: - * @arg @ref LL_LPTIM_OPERATING_MODE_CONTINUOUS - * @arg @ref LL_LPTIM_OPERATING_MODE_ONESHOT - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_StartCounter(LPTIM_TypeDef *LPTIMx, uint32_t OperatingMode) -{ - MODIFY_REG(LPTIMx->CR, LPTIM_CR_CNTSTRT | LPTIM_CR_SNGSTRT, OperatingMode); -} - -/** - * @brief Set the LPTIM registers update mode (enable/disable register preload) - * @note This function must be called when the LPTIM instance is disabled. - * @rmtoll CFGR PRELOAD LL_LPTIM_SetUpdateMode - * @param LPTIMx Low-Power Timer instance - * @param UpdateMode This parameter can be one of the following values: - * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE - * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetUpdateMode(LPTIM_TypeDef *LPTIMx, uint32_t UpdateMode) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD, UpdateMode); -} - -/** - * @brief Get the LPTIM registers update mode - * @rmtoll CFGR PRELOAD LL_LPTIM_GetUpdateMode - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE - * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetUpdateMode(LPTIM_TypeDef *const LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD)); -} - -/** - * @brief Set the auto reload value - * @note The LPTIMx_ARR register content must only be modified when the LPTIM is enabled - * @note After a write to the LPTIMx_ARR register a new write operation to the - * same register can only be performed when the previous write operation - * is completed. Any successive write before the ARROK flag is set, will - * lead to unpredictable results. - * @note autoreload value be strictly greater than the compare value. - * @rmtoll ARR ARR LL_LPTIM_SetAutoReload - * @param LPTIMx Low-Power Timer instance - * @param AutoReload Value between Min_Data=0x0001 and Max_Data=0xFFFF - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetAutoReload(LPTIM_TypeDef *LPTIMx, uint32_t AutoReload) -{ - MODIFY_REG(LPTIMx->ARR, LPTIM_ARR_ARR, AutoReload); -} - -/** - * @brief Get actual auto reload value - * @rmtoll ARR ARR LL_LPTIM_GetAutoReload - * @param LPTIMx Low-Power Timer instance - * @retval AutoReload Value between Min_Data=0x0001 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetAutoReload(LPTIM_TypeDef *const LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->ARR, LPTIM_ARR_ARR)); -} - -/** - * @brief Set the compare value - * @note After a write to the LPTIMx_CMP register a new write operation to the - * same register can only be performed when the previous write operation - * is completed. Any successive write before the CMPOK flag is set, will - * lead to unpredictable results. - * @rmtoll CMP CMP LL_LPTIM_SetCompare - * @param LPTIMx Low-Power Timer instance - * @param CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetCompare(LPTIM_TypeDef *LPTIMx, uint32_t CompareValue) -{ - MODIFY_REG(LPTIMx->CMP, LPTIM_CMP_CMP, CompareValue); -} - -/** - * @brief Get actual compare value - * @rmtoll CMP CMP LL_LPTIM_GetCompare - * @param LPTIMx Low-Power Timer instance - * @retval CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetCompare(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CMP, LPTIM_CMP_CMP)); -} - -/** - * @brief Get actual counter value - * @note When the LPTIM instance is running with an asynchronous clock, reading - * the LPTIMx_CNT register may return unreliable values. So in this case - * it is necessary to perform two consecutive read accesses and verify - * that the two returned values are identical. - * @rmtoll CNT CNT LL_LPTIM_GetCounter - * @param LPTIMx Low-Power Timer instance - * @retval Counter value - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetCounter(LPTIM_TypeDef *const LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CNT, LPTIM_CNT_CNT)); -} - -/** - * @brief Set the counter mode (selection of the LPTIM counter clock source). - * @note The counter mode can be set only when the LPTIM instance is disabled. - * @rmtoll CFGR COUNTMODE LL_LPTIM_SetCounterMode - * @param LPTIMx Low-Power Timer instance - * @param CounterMode This parameter can be one of the following values: - * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL - * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetCounterMode(LPTIM_TypeDef *LPTIMx, uint32_t CounterMode) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE, CounterMode); -} - -/** - * @brief Get the counter mode - * @rmtoll CFGR COUNTMODE LL_LPTIM_GetCounterMode - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL - * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetCounterMode(LPTIM_TypeDef *const LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE)); -} - -/** - * @brief Configure the LPTIM instance output (LPTIMx_OUT) - * @note This function must be called when the LPTIM instance is disabled. - * @note Regarding the LPTIM output polarity the change takes effect - * immediately, so the output default value will change immediately after - * the polarity is re-configured, even before the timer is enabled. - * @rmtoll CFGR WAVE LL_LPTIM_ConfigOutput\n - * CFGR WAVPOL LL_LPTIM_ConfigOutput - * @param LPTIMx Low-Power Timer instance - * @param Waveform This parameter can be one of the following values: - * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM - * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE - * @param Polarity This parameter can be one of the following values: - * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR - * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ConfigOutput(LPTIM_TypeDef *LPTIMx, uint32_t Waveform, uint32_t Polarity) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE | LPTIM_CFGR_WAVPOL, Waveform | Polarity); -} - -/** - * @brief Set waveform shape - * @rmtoll CFGR WAVE LL_LPTIM_SetWaveform - * @param LPTIMx Low-Power Timer instance - * @param Waveform This parameter can be one of the following values: - * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM - * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetWaveform(LPTIM_TypeDef *LPTIMx, uint32_t Waveform) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE, Waveform); -} - -/** - * @brief Get actual waveform shape - * @rmtoll CFGR WAVE LL_LPTIM_GetWaveform - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM - * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetWaveform(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVE)); -} - -/** - * @brief Set output polarity - * @rmtoll CFGR WAVPOL LL_LPTIM_SetPolarity - * @param LPTIMx Low-Power Timer instance - * @param Polarity This parameter can be one of the following values: - * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR - * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetPolarity(LPTIM_TypeDef *LPTIMx, uint32_t Polarity) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL, Polarity); -} - -/** - * @brief Get actual output polarity - * @rmtoll CFGR WAVPOL LL_LPTIM_GetPolarity - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR - * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetPolarity(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL)); -} - -/** - * @brief Set actual prescaler division ratio. - * @note This function must be called when the LPTIM instance is disabled. - * @note When the LPTIM is configured to be clocked by an internal clock source - * and the LPTIM counter is configured to be updated by active edges - * detected on the LPTIM external Input1, the internal clock provided to - * the LPTIM must be not be prescaled. - * @rmtoll CFGR PRESC LL_LPTIM_SetPrescaler - * @param LPTIMx Low-Power Timer instance - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_LPTIM_PRESCALER_DIV1 - * @arg @ref LL_LPTIM_PRESCALER_DIV2 - * @arg @ref LL_LPTIM_PRESCALER_DIV4 - * @arg @ref LL_LPTIM_PRESCALER_DIV8 - * @arg @ref LL_LPTIM_PRESCALER_DIV16 - * @arg @ref LL_LPTIM_PRESCALER_DIV32 - * @arg @ref LL_LPTIM_PRESCALER_DIV64 - * @arg @ref LL_LPTIM_PRESCALER_DIV128 - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetPrescaler(LPTIM_TypeDef *LPTIMx, uint32_t Prescaler) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRESC, Prescaler); -} - -/** - * @brief Get actual prescaler division ratio. - * @rmtoll CFGR PRESC LL_LPTIM_GetPrescaler - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_PRESCALER_DIV1 - * @arg @ref LL_LPTIM_PRESCALER_DIV2 - * @arg @ref LL_LPTIM_PRESCALER_DIV4 - * @arg @ref LL_LPTIM_PRESCALER_DIV8 - * @arg @ref LL_LPTIM_PRESCALER_DIV16 - * @arg @ref LL_LPTIM_PRESCALER_DIV32 - * @arg @ref LL_LPTIM_PRESCALER_DIV64 - * @arg @ref LL_LPTIM_PRESCALER_DIV128 - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRESC)); -} - -/** - * @brief Set LPTIM input 1 source (default GPIO). - * @rmtoll OR OR LL_LPTIM_SetInput1Src - * @param LPTIMx Low-Power Timer instance - * @param Src This parameter can be one of the following values: - * @arg @ref LL_LPTIM_INPUT1_SRC_PAD_AF - * @arg @ref LL_LPTIM_INPUT1_SRC_PAD_PA4 - * @arg @ref LL_LPTIM_INPUT1_SRC_PAD_PB9 - * @arg @ref LL_LPTIM_INPUT1_SRC_TIM_DAC - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetInput1Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) -{ - MODIFY_REG(LPTIMx->OR, LPTIM_OR_OR, Src); -} - -/** - * @} - */ - -/** @defgroup LPTIM_LL_EF_Trigger_Configuration Trigger Configuration - * @{ - */ - -/** - * @brief Enable the timeout function - * @note This function must be called when the LPTIM instance is disabled. - * @note The first trigger event will start the timer, any successive trigger - * event will reset the counter and the timer will restart. - * @note The timeout value corresponds to the compare value; if no trigger - * occurs within the expected time frame, the MCU is waked-up by the - * compare match event. - * @rmtoll CFGR TIMOUT LL_LPTIM_EnableTimeout - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableTimeout(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); -} - -/** - * @brief Disable the timeout function - * @note This function must be called when the LPTIM instance is disabled. - * @note A trigger event arriving when the timer is already started will be - * ignored. - * @rmtoll CFGR TIMOUT LL_LPTIM_DisableTimeout - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableTimeout(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); -} - -/** - * @brief Indicate whether the timeout function is enabled. - * @rmtoll CFGR TIMOUT LL_LPTIM_IsEnabledTimeout - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledTimeout(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == LPTIM_CFGR_TIMOUT) ? 1UL : 0UL)); -} - -/** - * @brief Start the LPTIM counter - * @note This function must be called when the LPTIM instance is disabled. - * @rmtoll CFGR TRIGEN LL_LPTIM_TrigSw - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_TrigSw(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN); -} - -/** - * @brief Configure the external trigger used as a trigger event for the LPTIM. - * @note This function must be called when the LPTIM instance is disabled. - * @note An internal clock source must be present when a digital filter is - * required for the trigger. - * @rmtoll CFGR TRIGSEL LL_LPTIM_ConfigTrigger\n - * CFGR TRGFLT LL_LPTIM_ConfigTrigger\n - * CFGR TRIGEN LL_LPTIM_ConfigTrigger - * @param LPTIMx Low-Power Timer instance - * @param Source This parameter can be one of the following values: - * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 - * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM1_TRGO - * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM5_TRGO - * @param Filter This parameter can be one of the following values: - * @arg @ref LL_LPTIM_TRIG_FILTER_NONE - * @arg @ref LL_LPTIM_TRIG_FILTER_2 - * @arg @ref LL_LPTIM_TRIG_FILTER_4 - * @arg @ref LL_LPTIM_TRIG_FILTER_8 - * @param Polarity This parameter can be one of the following values: - * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING - * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING - * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ConfigTrigger(LPTIM_TypeDef *LPTIMx, uint32_t Source, uint32_t Filter, uint32_t Polarity) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL | LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGEN, Source | Filter | Polarity); -} - -/** - * @brief Get actual external trigger source. - * @rmtoll CFGR TRIGSEL LL_LPTIM_GetTriggerSource - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 - * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM1_TRGO - * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM5_TRGO - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerSource(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL)); -} - -/** - * @brief Get actual external trigger filter. - * @rmtoll CFGR TRGFLT LL_LPTIM_GetTriggerFilter - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_TRIG_FILTER_NONE - * @arg @ref LL_LPTIM_TRIG_FILTER_2 - * @arg @ref LL_LPTIM_TRIG_FILTER_4 - * @arg @ref LL_LPTIM_TRIG_FILTER_8 - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerFilter(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRGFLT)); -} - -/** - * @brief Get actual external trigger polarity. - * @rmtoll CFGR TRIGEN LL_LPTIM_GetTriggerPolarity - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING - * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING - * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerPolarity(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN)); -} - -/** - * @} - */ - -/** @defgroup LPTIM_LL_EF_Clock_Configuration Clock Configuration - * @{ - */ - -/** - * @brief Set the source of the clock used by the LPTIM instance. - * @note This function must be called when the LPTIM instance is disabled. - * @rmtoll CFGR CKSEL LL_LPTIM_SetClockSource - * @param LPTIMx Low-Power Timer instance - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL - * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetClockSource(LPTIM_TypeDef *LPTIMx, uint32_t ClockSource) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKSEL, ClockSource); -} - -/** - * @brief Get actual LPTIM instance clock source. - * @rmtoll CFGR CKSEL LL_LPTIM_GetClockSource - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL - * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetClockSource(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKSEL)); -} - -/** - * @brief Configure the active edge or edges used by the counter when - the LPTIM is clocked by an external clock source. - * @note This function must be called when the LPTIM instance is disabled. - * @note When both external clock signal edges are considered active ones, - * the LPTIM must also be clocked by an internal clock source with a - * frequency equal to at least four times the external clock frequency. - * @note An internal clock source must be present when a digital filter is - * required for external clock. - * @rmtoll CFGR CKFLT LL_LPTIM_ConfigClock\n - * CFGR CKPOL LL_LPTIM_ConfigClock - * @param LPTIMx Low-Power Timer instance - * @param ClockFilter This parameter can be one of the following values: - * @arg @ref LL_LPTIM_CLK_FILTER_NONE - * @arg @ref LL_LPTIM_CLK_FILTER_2 - * @arg @ref LL_LPTIM_CLK_FILTER_4 - * @arg @ref LL_LPTIM_CLK_FILTER_8 - * @param ClockPolarity This parameter can be one of the following values: - * @arg @ref LL_LPTIM_CLK_POLARITY_RISING - * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING - * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ConfigClock(LPTIM_TypeDef *LPTIMx, uint32_t ClockFilter, uint32_t ClockPolarity) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKFLT | LPTIM_CFGR_CKPOL, ClockFilter | ClockPolarity); -} - -/** - * @brief Get actual clock polarity - * @rmtoll CFGR CKPOL LL_LPTIM_GetClockPolarity - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_CLK_POLARITY_RISING - * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING - * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetClockPolarity(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); -} - -/** - * @brief Get actual clock digital filter - * @rmtoll CFGR CKFLT LL_LPTIM_GetClockFilter - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_CLK_FILTER_NONE - * @arg @ref LL_LPTIM_CLK_FILTER_2 - * @arg @ref LL_LPTIM_CLK_FILTER_4 - * @arg @ref LL_LPTIM_CLK_FILTER_8 - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetClockFilter(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKFLT)); -} - -/** - * @} - */ - -/** @defgroup LPTIM_LL_EF_Encoder_Mode Encoder Mode - * @{ - */ - -/** - * @brief Configure the encoder mode. - * @note This function must be called when the LPTIM instance is disabled. - * @rmtoll CFGR CKPOL LL_LPTIM_SetEncoderMode - * @param LPTIMx Low-Power Timer instance - * @param EncoderMode This parameter can be one of the following values: - * @arg @ref LL_LPTIM_ENCODER_MODE_RISING - * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING - * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_SetEncoderMode(LPTIM_TypeDef *LPTIMx, uint32_t EncoderMode) -{ - MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKPOL, EncoderMode); -} - -/** - * @brief Get actual encoder mode. - * @rmtoll CFGR CKPOL LL_LPTIM_GetEncoderMode - * @param LPTIMx Low-Power Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_LPTIM_ENCODER_MODE_RISING - * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING - * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING - */ -__STATIC_INLINE uint32_t LL_LPTIM_GetEncoderMode(LPTIM_TypeDef *LPTIMx) -{ - return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); -} - -/** - * @brief Enable the encoder mode - * @note This function must be called when the LPTIM instance is disabled. - * @note In this mode the LPTIM instance must be clocked by an internal clock - * source. Also, the prescaler division ratio must be equal to 1. - * @note LPTIM instance must be configured in continuous mode prior enabling - * the encoder mode. - * @rmtoll CFGR ENC LL_LPTIM_EnableEncoderMode - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableEncoderMode(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); -} - -/** - * @brief Disable the encoder mode - * @note This function must be called when the LPTIM instance is disabled. - * @rmtoll CFGR ENC LL_LPTIM_DisableEncoderMode - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableEncoderMode(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); -} - -/** - * @brief Indicates whether the LPTIM operates in encoder mode. - * @rmtoll CFGR ENC LL_LPTIM_IsEnabledEncoderMode - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledEncoderMode(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == LPTIM_CFGR_ENC) ? 1UL : 0UL)); -} - -/** - * @} - */ - -/** @defgroup LPTIM_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Clear the compare match flag (CMPMCF) - * @rmtoll ICR CMPMCF LL_LPTIM_ClearFLAG_CMPM - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFLAG_CMPM(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPMCF); -} - -/** - * @brief Inform application whether a compare match interrupt has occurred. - * @rmtoll ISR CMPM LL_LPTIM_IsActiveFlag_CMPM - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPM(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPM) == LPTIM_ISR_CMPM) ? 1UL : 0UL)); -} - -/** - * @brief Clear the autoreload match flag (ARRMCF) - * @rmtoll ICR ARRMCF LL_LPTIM_ClearFLAG_ARRM - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFLAG_ARRM(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARRMCF); -} - -/** - * @brief Inform application whether a autoreload match interrupt has occurred. - * @rmtoll ISR ARRM LL_LPTIM_IsActiveFlag_ARRM - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARRM(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == LPTIM_ISR_ARRM) ? 1UL : 0UL)); -} - -/** - * @brief Clear the external trigger valid edge flag(EXTTRIGCF). - * @rmtoll ICR EXTTRIGCF LL_LPTIM_ClearFlag_EXTTRIG - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_EXTTRIGCF); -} - -/** - * @brief Inform application whether a valid edge on the selected external trigger input has occurred. - * @rmtoll ISR EXTTRIG LL_LPTIM_IsActiveFlag_EXTTRIG - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == LPTIM_ISR_EXTTRIG) ? 1UL : 0UL)); -} - -/** - * @brief Clear the compare register update interrupt flag (CMPOKCF). - * @rmtoll ICR CMPOKCF LL_LPTIM_ClearFlag_CMPOK - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFlag_CMPOK(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPOKCF); -} - -/** - * @brief Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully - completed. If so, a new one can be initiated. - * @rmtoll ISR CMPOK LL_LPTIM_IsActiveFlag_CMPOK - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPOK(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPOK) == LPTIM_ISR_CMPOK) ? 1UL : 0UL)); -} - -/** - * @brief Clear the autoreload register update interrupt flag (ARROKCF). - * @rmtoll ICR ARROKCF LL_LPTIM_ClearFlag_ARROK - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARROKCF); -} - -/** - * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully - completed. If so, a new one can be initiated. - * @rmtoll ISR ARROK LL_LPTIM_IsActiveFlag_ARROK - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARROK(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == LPTIM_ISR_ARROK) ? 1UL : 0UL)); -} - -/** - * @brief Clear the counter direction change to up interrupt flag (UPCF). - * @rmtoll ICR UPCF LL_LPTIM_ClearFlag_UP - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_UPCF); -} - -/** - * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance - operates in encoder mode). - * @rmtoll ISR UP LL_LPTIM_IsActiveFlag_UP - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UP(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == LPTIM_ISR_UP) ? 1UL : 0UL)); -} - -/** - * @brief Clear the counter direction change to down interrupt flag (DOWNCF). - * @rmtoll ICR DOWNCF LL_LPTIM_ClearFlag_DOWN - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->ICR, LPTIM_ICR_DOWNCF); -} - -/** - * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance - operates in encoder mode). - * @rmtoll ISR DOWN LL_LPTIM_IsActiveFlag_DOWN - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DOWN(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == LPTIM_ISR_DOWN) ? 1UL : 0UL)); -} - -/** - * @} - */ - -/** @defgroup LPTIM_LL_EF_IT_Management Interrupt Management - * @{ - */ - -/** - * @brief Enable compare match interrupt (CMPMIE). - * @rmtoll IER CMPMIE LL_LPTIM_EnableIT_CMPM - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_CMPM(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE); -} - -/** - * @brief Disable compare match interrupt (CMPMIE). - * @rmtoll IER CMPMIE LL_LPTIM_DisableIT_CMPM - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_CMPM(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE); -} - -/** - * @brief Indicates whether the compare match interrupt (CMPMIE) is enabled. - * @rmtoll IER CMPMIE LL_LPTIM_IsEnabledIT_CMPM - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPM(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE) == LPTIM_IER_CMPMIE) ? 1UL : 0UL)); -} - -/** - * @brief Enable autoreload match interrupt (ARRMIE). - * @rmtoll IER ARRMIE LL_LPTIM_EnableIT_ARRM - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_ARRM(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE); -} - -/** - * @brief Disable autoreload match interrupt (ARRMIE). - * @rmtoll IER ARRMIE LL_LPTIM_DisableIT_ARRM - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_ARRM(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE); -} - -/** - * @brief Indicates whether the autoreload match interrupt (ARRMIE) is enabled. - * @rmtoll IER ARRMIE LL_LPTIM_IsEnabledIT_ARRM - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARRM(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE) == LPTIM_IER_ARRMIE) ? 1UL : 0UL)); -} - -/** - * @brief Enable external trigger valid edge interrupt (EXTTRIGIE). - * @rmtoll IER EXTTRIGIE LL_LPTIM_EnableIT_EXTTRIG - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE); -} - -/** - * @brief Disable external trigger valid edge interrupt (EXTTRIGIE). - * @rmtoll IER EXTTRIGIE LL_LPTIM_DisableIT_EXTTRIG - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE); -} - -/** - * @brief Indicates external trigger valid edge interrupt (EXTTRIGIE) is enabled. - * @rmtoll IER EXTTRIGIE LL_LPTIM_IsEnabledIT_EXTTRIG - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE) == LPTIM_IER_EXTTRIGIE) ? 1UL : 0UL)); -} - -/** - * @brief Enable compare register write completed interrupt (CMPOKIE). - * @rmtoll IER CMPOKIE LL_LPTIM_EnableIT_CMPOK - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_CMPOK(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE); -} - -/** - * @brief Disable compare register write completed interrupt (CMPOKIE). - * @rmtoll IER CMPOKIE LL_LPTIM_DisableIT_CMPOK - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_CMPOK(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE); -} - -/** - * @brief Indicates whether the compare register write completed interrupt (CMPOKIE) is enabled. - * @rmtoll IER CMPOKIE LL_LPTIM_IsEnabledIT_CMPOK - * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPOK(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE) == LPTIM_IER_CMPOKIE) ? 1UL : 0UL)); -} - -/** - * @brief Enable autoreload register write completed interrupt (ARROKIE). - * @rmtoll IER ARROKIE LL_LPTIM_EnableIT_ARROK - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_ARROK(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE); -} - -/** - * @brief Disable autoreload register write completed interrupt (ARROKIE). - * @rmtoll IER ARROKIE LL_LPTIM_DisableIT_ARROK - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_ARROK(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE); -} - -/** - * @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled. - * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK - * @param LPTIMx Low-Power Timer instance - * @retval State of bit(1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARROK(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE) == LPTIM_IER_ARROKIE) ? 1UL : 0UL)); -} - -/** - * @brief Enable direction change to up interrupt (UPIE). - * @rmtoll IER UPIE LL_LPTIM_EnableIT_UP - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_UP(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_UPIE); -} - -/** - * @brief Disable direction change to up interrupt (UPIE). - * @rmtoll IER UPIE LL_LPTIM_DisableIT_UP - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_UP(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_UPIE); -} - -/** - * @brief Indicates whether the direction change to up interrupt (UPIE) is enabled. - * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP - * @param LPTIMx Low-Power Timer instance - * @retval State of bit(1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UP(LPTIM_TypeDef *LPTIMx) -{ - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_UPIE) == LPTIM_IER_UPIE) ? 1UL : 0UL)); -} - -/** - * @brief Enable direction change to down interrupt (DOWNIE). - * @rmtoll IER DOWNIE LL_LPTIM_EnableIT_DOWN - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_EnableIT_DOWN(LPTIM_TypeDef *LPTIMx) -{ - SET_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE); -} - -/** - * @brief Disable direction change to down interrupt (DOWNIE). - * @rmtoll IER DOWNIE LL_LPTIM_DisableIT_DOWN - * @param LPTIMx Low-Power Timer instance - * @retval None - */ -__STATIC_INLINE void LL_LPTIM_DisableIT_DOWN(LPTIM_TypeDef *LPTIMx) -{ - CLEAR_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE); -} - -/** - * @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled. - * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN - * @param LPTIMx Low-Power Timer instance - * @retval State of bit(1 or 0). - */ -__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(LPTIM_TypeDef *LPTIMx) -{ - return ((READ_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE) == LPTIM_IER_DOWNIE) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* LPTIM1 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_LL_LPTIM_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h deleted file mode 100644 index ea23dc5..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h +++ /dev/null @@ -1,985 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_pwr.h - * @author MCD Application Team - * @brief Header file of PWR LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_PWR_H -#define __STM32F4xx_LL_PWR_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(PWR) - -/** @defgroup PWR_LL PWR - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_PWR_WriteReg function - * @{ - */ -#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ -#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_PWR_ReadReg function - * @{ - */ -#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ -#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ -#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ -#define LL_PWR_CSR_VOS PWR_CSR_VOSRDY /*!< Voltage scaling select flag */ -#if defined(PWR_CSR_EWUP) -#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin */ -#elif defined(PWR_CSR_EWUP1) -#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ -#endif /* PWR_CSR_EWUP */ -#if defined(PWR_CSR_EWUP2) -#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ -#endif /* PWR_CSR_EWUP2 */ -#if defined(PWR_CSR_EWUP3) -#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ -#endif /* PWR_CSR_EWUP3 */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage - * @{ - */ -#if defined(PWR_CR_VOS_0) -#define LL_PWR_REGU_VOLTAGE_SCALE3 (PWR_CR_VOS_0) -#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR_VOS_1) -#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS_0 | PWR_CR_VOS_1) /* The SCALE1 is not available for STM32F401xx devices */ -#else -#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS) -#define LL_PWR_REGU_VOLTAGE_SCALE2 0x00000000U -#endif /* PWR_CR_VOS_0 */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_MODE_PWR Mode Power - * @{ - */ -#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) -#define LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (PWR_CR_MRUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in under-drive mode) when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in under-drive mode) when the CPU enters deepsleep */ -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -#if defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) -#define LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (PWR_CR_MRLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in Deep Sleep mode) when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (PWR_CR_LPDS | PWR_CR_LPLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in Deep Sleep mode) when the CPU enters deepsleep */ -#endif /* PWR_CR_MRLVDS && PWR_CR_LPLVDS && PWR_CR_FPDS */ -#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode - * @{ - */ -#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ -#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level - * @{ - */ -#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */ -#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */ -#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */ -#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ -#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */ -#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */ -#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */ -#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */ -/** - * @} - */ -/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins - * @{ - */ -#if defined(PWR_CSR_EWUP) -#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin : PA0 */ -#endif /* PWR_CSR_EWUP */ -#if defined(PWR_CSR_EWUP1) -#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ -#endif /* PWR_CSR_EWUP1 */ -#if defined(PWR_CSR_EWUP2) -#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC0 or PC13 according to device */ -#endif /* PWR_CSR_EWUP2 */ -#if defined(PWR_CSR_EWUP3) -#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PC1 */ -#endif /* PWR_CSR_EWUP3 */ -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in PWR register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) - -/** - * @brief Read a value in PWR register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_LL_EF_Configuration Configuration - * @{ - */ -#if defined(PWR_CR_FISSR) -/** - * @brief Enable FLASH interface STOP while system Run is ON - * @rmtoll CR FISSR LL_PWR_EnableFLASHInterfaceSTOP - * @note This mode is enabled only with STOP low power mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFLASHInterfaceSTOP(void) -{ - SET_BIT(PWR->CR, PWR_CR_FISSR); -} - -/** - * @brief Disable FLASH Interface STOP while system Run is ON - * @rmtoll CR FISSR LL_PWR_DisableFLASHInterfaceSTOP - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFLASHInterfaceSTOP(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FISSR); -} - -/** - * @brief Check if FLASH Interface STOP while system Run feature is enabled - * @rmtoll CR FISSR LL_PWR_IsEnabledFLASHInterfaceSTOP - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHInterfaceSTOP(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FISSR) == (PWR_CR_FISSR)); -} -#endif /* PWR_CR_FISSR */ - -#if defined(PWR_CR_FMSSR) -/** - * @brief Enable FLASH Memory STOP while system Run is ON - * @rmtoll CR FMSSR LL_PWR_EnableFLASHMemorySTOP - * @note This mode is enabled only with STOP low power mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFLASHMemorySTOP(void) -{ - SET_BIT(PWR->CR, PWR_CR_FMSSR); -} - -/** - * @brief Disable FLASH Memory STOP while system Run is ON - * @rmtoll CR FMSSR LL_PWR_DisableFLASHMemorySTOP - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFLASHMemorySTOP(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); -} - -/** - * @brief Check if FLASH Memory STOP while system Run feature is enabled - * @rmtoll CR FMSSR LL_PWR_IsEnabledFLASHMemorySTOP - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHMemorySTOP(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FMSSR) == (PWR_CR_FMSSR)); -} -#endif /* PWR_CR_FMSSR */ -#if defined(PWR_CR_UDEN) -/** - * @brief Enable Under Drive Mode - * @rmtoll CR UDEN LL_PWR_EnableUnderDriveMode - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main Regulator or the low power Regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage Regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableUnderDriveMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_UDEN); -} - -/** - * @brief Disable Under Drive Mode - * @rmtoll CR UDEN LL_PWR_DisableUnderDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableUnderDriveMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_UDEN); -} - -/** - * @brief Check if Under Drive Mode is enabled - * @rmtoll CR UDEN LL_PWR_IsEnabledUnderDriveMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledUnderDriveMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_UDEN) == (PWR_CR_UDEN)); -} -#endif /* PWR_CR_UDEN */ - -#if defined(PWR_CR_ODSWEN) -/** - * @brief Enable Over drive switching - * @rmtoll CR ODSWEN LL_PWR_EnableOverDriveSwitching - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableOverDriveSwitching(void) -{ - SET_BIT(PWR->CR, PWR_CR_ODSWEN); -} - -/** - * @brief Disable Over drive switching - * @rmtoll CR ODSWEN LL_PWR_DisableOverDriveSwitching - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableOverDriveSwitching(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_ODSWEN); -} - -/** - * @brief Check if Over drive switching is enabled - * @rmtoll CR ODSWEN LL_PWR_IsEnabledOverDriveSwitching - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveSwitching(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_ODSWEN) == (PWR_CR_ODSWEN)); -} -#endif /* PWR_CR_ODSWEN */ -#if defined(PWR_CR_ODEN) -/** - * @brief Enable Over drive Mode - * @rmtoll CR ODEN LL_PWR_EnableOverDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableOverDriveMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_ODEN); -} - -/** - * @brief Disable Over drive Mode - * @rmtoll CR ODEN LL_PWR_DisableOverDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableOverDriveMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_ODEN); -} - -/** - * @brief Check if Over drive switching is enabled - * @rmtoll CR ODEN LL_PWR_IsEnabledOverDriveMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_ODEN) == (PWR_CR_ODEN)); -} -#endif /* PWR_CR_ODEN */ -#if defined(PWR_CR_MRUDS) -/** - * @brief Enable Main Regulator in deepsleep under-drive Mode - * @rmtoll CR MRUDS LL_PWR_EnableMainRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableMainRegulatorDeepSleepUDMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_MRUDS); -} - -/** - * @brief Disable Main Regulator in deepsleep under-drive Mode - * @rmtoll CR MRUDS LL_PWR_DisableMainRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableMainRegulatorDeepSleepUDMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_MRUDS); -} - -/** - * @brief Check if Main Regulator in deepsleep under-drive Mode is enabled - * @rmtoll CR MRUDS LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_MRUDS) == (PWR_CR_MRUDS)); -} -#endif /* PWR_CR_MRUDS */ - -#if defined(PWR_CR_LPUDS) -/** - * @brief Enable Low Power Regulator in deepsleep under-drive Mode - * @rmtoll CR LPUDS LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_LPUDS); -} - -/** - * @brief Disable Low Power Regulator in deepsleep under-drive Mode - * @rmtoll CR LPUDS LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_LPUDS); -} - -/** - * @brief Check if Low Power Regulator in deepsleep under-drive Mode is enabled - * @rmtoll CR LPUDS LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_LPUDS) == (PWR_CR_LPUDS)); -} -#endif /* PWR_CR_LPUDS */ - -#if defined(PWR_CR_MRLVDS) -/** - * @brief Enable Main Regulator low voltage Mode - * @rmtoll CR MRLVDS LL_PWR_EnableMainRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableMainRegulatorLowVoltageMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_MRLVDS); -} - -/** - * @brief Disable Main Regulator low voltage Mode - * @rmtoll CR MRLVDS LL_PWR_DisableMainRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableMainRegulatorLowVoltageMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_MRLVDS); -} - -/** - * @brief Check if Main Regulator low voltage Mode is enabled - * @rmtoll CR MRLVDS LL_PWR_IsEnabledMainRegulatorLowVoltageMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorLowVoltageMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_MRLVDS) == (PWR_CR_MRLVDS)); -} -#endif /* PWR_CR_MRLVDS */ - -#if defined(PWR_CR_LPLVDS) -/** - * @brief Enable Low Power Regulator low voltage Mode - * @rmtoll CR LPLVDS LL_PWR_EnableLowPowerRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorLowVoltageMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_LPLVDS); -} - -/** - * @brief Disable Low Power Regulator low voltage Mode - * @rmtoll CR LPLVDS LL_PWR_DisableLowPowerRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorLowVoltageMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_LPLVDS); -} - -/** - * @brief Check if Low Power Regulator low voltage Mode is enabled - * @rmtoll CR LPLVDS LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_LPLVDS) == (PWR_CR_LPLVDS)); -} -#endif /* PWR_CR_LPLVDS */ -/** - * @brief Set the main internal Regulator output voltage - * @rmtoll CR VOS LL_PWR_SetRegulVoltageScaling - * @param VoltageScaling This parameter can be one of the following values: - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 - * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) -{ - MODIFY_REG(PWR->CR, PWR_CR_VOS, VoltageScaling); -} - -/** - * @brief Get the main internal Regulator output voltage - * @rmtoll CR VOS LL_PWR_GetRegulVoltageScaling - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 - * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices - */ -__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_VOS)); -} -/** - * @brief Enable the Flash Power Down in Stop Mode - * @rmtoll CR FPDS LL_PWR_EnableFlashPowerDown - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void) -{ - SET_BIT(PWR->CR, PWR_CR_FPDS); -} - -/** - * @brief Disable the Flash Power Down in Stop Mode - * @rmtoll CR FPDS LL_PWR_DisableFlashPowerDown - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FPDS); -} - -/** - * @brief Check if the Flash Power Down in Stop Mode is enabled - * @rmtoll CR FPDS LL_PWR_IsEnabledFlashPowerDown - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FPDS) == (PWR_CR_FPDS)); -} - -/** - * @brief Enable access to the backup domain - * @rmtoll CR DBP LL_PWR_EnableBkUpAccess - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) -{ - SET_BIT(PWR->CR, PWR_CR_DBP); -} - -/** - * @brief Disable access to the backup domain - * @rmtoll CR DBP LL_PWR_DisableBkUpAccess - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_DBP); -} - -/** - * @brief Check if the backup domain is enabled - * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); -} -/** - * @brief Enable the backup Regulator - * @rmtoll CSR BRE LL_PWR_EnableBkUpRegulator - * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. - * The LL_PWR_EnableBkUpAccess() must be called before using this API. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) -{ - SET_BIT(PWR->CSR, PWR_CSR_BRE); -} - -/** - * @brief Disable the backup Regulator - * @rmtoll CSR BRE LL_PWR_DisableBkUpRegulator - * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. - * The LL_PWR_EnableBkUpAccess() must be called before using this API. - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) -{ - CLEAR_BIT(PWR->CSR, PWR_CSR_BRE); -} - -/** - * @brief Check if the backup Regulator is enabled - * @rmtoll CSR BRE LL_PWR_IsEnabledBkUpRegulator - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_BRE) == (PWR_CSR_BRE)); -} - -/** - * @brief Set voltage Regulator mode during deep sleep mode - * @rmtoll CR LPDS LL_PWR_SetRegulModeDS - * @param RegulMode This parameter can be one of the following values: - * @arg @ref LL_PWR_REGU_DSMODE_MAIN - * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) -{ - MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); -} - -/** - * @brief Get voltage Regulator mode during deep sleep mode - * @rmtoll CR LPDS LL_PWR_GetRegulModeDS - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_REGU_DSMODE_MAIN - * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER - */ -__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); -} - -/** - * @brief Set Power Down mode when CPU enters deepsleep - * @rmtoll CR PDDS LL_PWR_SetPowerMode\n - * @rmtoll CR MRUDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPUDS LL_PWR_SetPowerMode\n - * @rmtoll CR FPDS LL_PWR_SetPowerMode\n - * @rmtoll CR MRLVDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPlVDS LL_PWR_SetPowerMode\n - * @rmtoll CR FPDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPDS LL_PWR_SetPowerMode - * @param PDMode This parameter can be one of the following values: - * @arg @ref LL_PWR_MODE_STOP_MAINREGU - * @arg @ref LL_PWR_MODE_STOP_LPREGU - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) - * - * (*) not available on all devices - * @arg @ref LL_PWR_MODE_STANDBY - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) -{ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS), PDMode); -#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS), PDMode); -#else - MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode); -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -} - -/** - * @brief Get Power Down mode when CPU enters deepsleep - * @rmtoll CR PDDS LL_PWR_GetPowerMode\n - * @rmtoll CR MRUDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPUDS LL_PWR_GetPowerMode\n - * @rmtoll CR FPDS LL_PWR_GetPowerMode\n - * @rmtoll CR MRLVDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPLVDS LL_PWR_GetPowerMode\n - * @rmtoll CR FPDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPDS LL_PWR_GetPowerMode - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_MODE_STOP_MAINREGU - * @arg @ref LL_PWR_MODE_STOP_LPREGU - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) - * - * (*) not available on all devices - * @arg @ref LL_PWR_MODE_STANDBY - */ -__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) -{ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS))); -#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS))); -#else - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS))); -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -} - -/** - * @brief Configure the voltage threshold detected by the Power Voltage Detector - * @rmtoll CR PLS LL_PWR_SetPVDLevel - * @param PVDLevel This parameter can be one of the following values: - * @arg @ref LL_PWR_PVDLEVEL_0 - * @arg @ref LL_PWR_PVDLEVEL_1 - * @arg @ref LL_PWR_PVDLEVEL_2 - * @arg @ref LL_PWR_PVDLEVEL_3 - * @arg @ref LL_PWR_PVDLEVEL_4 - * @arg @ref LL_PWR_PVDLEVEL_5 - * @arg @ref LL_PWR_PVDLEVEL_6 - * @arg @ref LL_PWR_PVDLEVEL_7 - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) -{ - MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); -} - -/** - * @brief Get the voltage threshold detection - * @rmtoll CR PLS LL_PWR_GetPVDLevel - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_PVDLEVEL_0 - * @arg @ref LL_PWR_PVDLEVEL_1 - * @arg @ref LL_PWR_PVDLEVEL_2 - * @arg @ref LL_PWR_PVDLEVEL_3 - * @arg @ref LL_PWR_PVDLEVEL_4 - * @arg @ref LL_PWR_PVDLEVEL_5 - * @arg @ref LL_PWR_PVDLEVEL_6 - * @arg @ref LL_PWR_PVDLEVEL_7 - */ -__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); -} - -/** - * @brief Enable Power Voltage Detector - * @rmtoll CR PVDE LL_PWR_EnablePVD - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnablePVD(void) -{ - SET_BIT(PWR->CR, PWR_CR_PVDE); -} - -/** - * @brief Disable Power Voltage Detector - * @rmtoll CR PVDE LL_PWR_DisablePVD - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisablePVD(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_PVDE); -} - -/** - * @brief Check if Power Voltage Detector is enabled - * @rmtoll CR PVDE LL_PWR_IsEnabledPVD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); -} - -/** - * @brief Enable the WakeUp PINx functionality - * @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) -{ - SET_BIT(PWR->CSR, WakeUpPin); -} - -/** - * @brief Disable the WakeUp PINx functionality - * @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) -{ - CLEAR_BIT(PWR->CSR, WakeUpPin); -} - -/** - * @brief Check if the WakeUp PINx functionality is enabled - * @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) -{ - return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); -} - - -/** - * @} - */ - -/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Wake-up Flag - * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); -} - -/** - * @brief Get Standby Flag - * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); -} - -/** - * @brief Get Backup Regulator ready Flag - * @rmtoll CSR BRR LL_PWR_IsActiveFlag_BRR - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_BRR) == (PWR_CSR_BRR)); -} -/** - * @brief Indicate whether VDD voltage is below the selected PVD threshold - * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); -} - -/** - * @brief Indicate whether the Regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level - * @rmtoll CSR VOS LL_PWR_IsActiveFlag_VOS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) -{ - return (READ_BIT(PWR->CSR, LL_PWR_CSR_VOS) == (LL_PWR_CSR_VOS)); -} -#if defined(PWR_CR_ODEN) -/** - * @brief Indicate whether the Over-Drive mode is ready or not - * @rmtoll CSR ODRDY LL_PWR_IsActiveFlag_OD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_OD(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_ODRDY) == (PWR_CSR_ODRDY)); -} -#endif /* PWR_CR_ODEN */ - -#if defined(PWR_CR_ODSWEN) -/** - * @brief Indicate whether the Over-Drive mode switching is ready or not - * @rmtoll CSR ODSWRDY LL_PWR_IsActiveFlag_ODSW - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ODSW(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_ODSWRDY) == (PWR_CSR_ODSWRDY)); -} -#endif /* PWR_CR_ODSWEN */ - -#if defined(PWR_CR_UDEN) -/** - * @brief Indicate whether the Under-Drive mode is ready or not - * @rmtoll CSR UDRDY LL_PWR_IsActiveFlag_UD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_UD(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_UDRDY) == (PWR_CSR_UDRDY)); -} -#endif /* PWR_CR_UDEN */ -/** - * @brief Clear Standby Flag - * @rmtoll CR CSBF LL_PWR_ClearFlag_SB - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) -{ - SET_BIT(PWR->CR, PWR_CR_CSBF); -} - -/** - * @brief Clear Wake-up Flags - * @rmtoll CR CWUF LL_PWR_ClearFlag_WU - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) -{ - SET_BIT(PWR->CR, PWR_CR_CWUF); -} -#if defined(PWR_CSR_UDRDY) -/** - * @brief Clear Under-Drive ready Flag - * @rmtoll CSR UDRDY LL_PWR_ClearFlag_UD - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_UD(void) -{ - WRITE_REG(PWR->CSR, PWR_CSR_UDRDY); -} -#endif /* PWR_CSR_UDRDY */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup PWR_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_PWR_DeInit(void); -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(PWR) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_PWR_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h deleted file mode 100644 index 1df1b58..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h +++ /dev/null @@ -1,7096 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rcc.h - * @author MCD Application Team - * @brief Header file of RCC LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_RCC_H -#define __STM32F4xx_LL_RCC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup RCC_LL RCC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_LL_Private_Variables RCC Private Variables - * @{ - */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -static const uint8_t aRCC_PLLSAIDIVRPrescTable[4] = {2, 4, 8, 16}; -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Private_Macros RCC Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Exported_Types RCC Exported Types - * @{ - */ - -/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure - * @{ - */ - -/** - * @brief RCC Clocks Frequency Structure - */ -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ - uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ - uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ - uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ -} LL_RCC_ClocksTypeDef; - -/** - * @} - */ - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation - * @brief Defines used to adapt values of different oscillators - * @note These values could be modified in the user environment according to - * HW set-up. - * @{ - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) -#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ -#endif /* HSI_VALUE */ - -#if !defined (LSE_VALUE) -#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSI_VALUE) -#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ -#endif /* LSI_VALUE */ - -#if !defined (EXTERNAL_CLOCK_VALUE) -#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ -#endif /* EXTERNAL_CLOCK_VALUE */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_RCC_WriteReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ -#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ -#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ -#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ -#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYC RCC_CIR_PLLI2SRDYC /*!< PLLI2S Ready Interrupt Clear */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYC RCC_CIR_PLLSAIRDYC /*!< PLLSAI Ready Interrupt Clear */ -#endif /* RCC_PLLSAI_SUPPORT */ -#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RCC_ReadReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ -#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ -#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ -#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ -#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYF RCC_CIR_PLLI2SRDYF /*!< PLLI2S Ready Interrupt flag */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYF RCC_CIR_PLLSAIRDYF /*!< PLLSAI Ready Interrupt flag */ -#endif /* RCC_PLLSAI_SUPPORT */ -#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ -#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ -#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ -#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ -#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ -#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ -#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ -#if defined(RCC_CSR_BORRSTF) -#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ -#endif /* RCC_CSR_BORRSTF */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions - * @{ - */ -#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ -#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ -#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ -#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ -#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYIE RCC_CIR_PLLI2SRDYIE /*!< PLLI2S Ready Interrupt Enable */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYIE RCC_CIR_PLLSAIRDYIE /*!< PLLSAI Ready Interrupt Enable */ -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ -#if defined(RCC_CFGR_SW_PLLR) -#define LL_RCC_SYS_CLKSOURCE_PLLR RCC_CFGR_SW_PLLR /*!< PLLR selection as system clock */ -#endif /* RCC_CFGR_SW_PLLR */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#if defined(RCC_PLLR_SYSCLK_SUPPORT) -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLLR RCC_CFGR_SWS_PLLR /*!< PLLR used as system clock */ -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler - * @{ - */ -#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) - * @{ - */ -#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) - * @{ - */ -#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection - * @{ - */ -#define LL_RCC_MCO1SOURCE_HSI (uint32_t)(RCC_CFGR_MCO1|0x00000000U) /*!< HSI selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_LSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_0 >> 16U)) /*!< LSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_1 >> 16U)) /*!< HSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO1|((RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) >> 16U)) /*!< PLLCLK selection as MCO1 source */ -#if defined(RCC_CFGR_MCO2) -#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)(RCC_CFGR_MCO2|0x00000000U) /*!< SYSCLK selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_PLLI2S (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_0 >> 16U)) /*!< PLLI2S selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_HSE (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_1 >> 16U)) /*!< HSE selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO2|((RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) >> 16U)) /*!< PLLCLK selection as MCO2 source */ -#endif /* RCC_CFGR_MCO2 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler - * @{ - */ -#define LL_RCC_MCO1_DIV_1 (uint32_t)(RCC_CFGR_MCO1PRE|0x00000000U) /*!< MCO1 not divided */ -#define LL_RCC_MCO1_DIV_2 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE_2 >> 16U)) /*!< MCO1 divided by 2 */ -#define LL_RCC_MCO1_DIV_3 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_0) >> 16U)) /*!< MCO1 divided by 3 */ -#define LL_RCC_MCO1_DIV_4 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_1) >> 16U)) /*!< MCO1 divided by 4 */ -#define LL_RCC_MCO1_DIV_5 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE >> 16U)) /*!< MCO1 divided by 5 */ -#if defined(RCC_CFGR_MCO2PRE) -#define LL_RCC_MCO2_DIV_1 (uint32_t)(RCC_CFGR_MCO2PRE|0x00000000U) /*!< MCO2 not divided */ -#define LL_RCC_MCO2_DIV_2 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE_2 >> 16U)) /*!< MCO2 divided by 2 */ -#define LL_RCC_MCO2_DIV_3 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_0) >> 16U)) /*!< MCO2 divided by 3 */ -#define LL_RCC_MCO2_DIV_4 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_1) >> 16U)) /*!< MCO2 divided by 4 */ -#define LL_RCC_MCO2_DIV_5 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE >> 16U)) /*!< MCO2 divided by 5 */ -#endif /* RCC_CFGR_MCO2PRE */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock - * @{ - */ -#define LL_RCC_RTC_NOCLOCK 0x00000000U /*!< HSE not divided */ -#define LL_RCC_RTC_HSE_DIV_2 RCC_CFGR_RTCPRE_1 /*!< HSE clock divided by 2 */ -#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 3 */ -#define LL_RCC_RTC_HSE_DIV_4 RCC_CFGR_RTCPRE_2 /*!< HSE clock divided by 4 */ -#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 5 */ -#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 6 */ -#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 7 */ -#define LL_RCC_RTC_HSE_DIV_8 RCC_CFGR_RTCPRE_3 /*!< HSE clock divided by 8 */ -#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 9 */ -#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 10 */ -#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 11 */ -#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 12 */ -#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 13 */ -#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 14 */ -#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 15 */ -#define LL_RCC_RTC_HSE_DIV_16 RCC_CFGR_RTCPRE_4 /*!< HSE clock divided by 16 */ -#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 17 */ -#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 18 */ -#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 19 */ -#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 20 */ -#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 21 */ -#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 22 */ -#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 23 */ -#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) /*!< HSE clock divided by 24 */ -#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 25 */ -#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 26 */ -#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 27 */ -#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 28 */ -#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 29 */ -#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 30 */ -#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 31 */ -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency - * @{ - */ -#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ -#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -#if defined(FMPI2C1) -/** @defgroup RCC_LL_EC_FMPI2C1_CLKSOURCE Peripheral FMPI2C clock source selection - * @{ - */ -#define LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as FMPI2C1 clock source */ -#define LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK RCC_DCKCFGR2_FMPI2C1SEL_0 /*!< SYSCLK clock used as FMPI2C1 clock source */ -#define LL_RCC_FMPI2C1_CLKSOURCE_HSI RCC_DCKCFGR2_FMPI2C1SEL_1 /*!< HSI clock used as FMPI2C1 clock source */ -/** - * @} - */ -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection - * @{ - */ -#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_0 /*!< LSI oscillator clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_1 /*!< HSI oscillator clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_DCKCFGR2_LPTIM1SEL_1 | RCC_DCKCFGR2_LPTIM1SEL_0) /*!< LSE oscillator clock used as LPTIM1 clock */ -/** - * @} - */ -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection - * @{ - */ -#if defined(RCC_DCKCFGR_SAI1SRC) -#define LL_RCC_SAI1_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1SRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_1 >> 16)) /*!< PLL clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC >> 16)) /*!< External pin clock used as SAI1 clock source */ -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI2SRC) -#define LL_RCC_SAI2_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI2SRC | 0x00000000U) /*!< PLLSAI clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_0 >> 16)) /*!< PLLI2S clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_1 >> 16)) /*!< PLL clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC >> 16)) /*!< PLL Main clock used as SAI2 clock source */ -#endif /* RCC_DCKCFGR_SAI2SRC */ -#if defined(RCC_DCKCFGR_SAI1ASRC) -#if defined(RCC_SAI1A_PLLSOURCE_SUPPORT) -#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< External pin used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< PLL clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC >> 16)) /*!< PLL Main clock used as SAI1 block A clock source */ -#else -#define LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< External pin clock used as SAI1 block A clock source */ -#endif /* RCC_SAI1A_PLLSOURCE_SUPPORT */ -#endif /* RCC_DCKCFGR_SAI1ASRC */ -#if defined(RCC_DCKCFGR_SAI1BSRC) -#if defined(RCC_SAI1B_PLLSOURCE_SUPPORT) -#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< External pin used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< PLL clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC >> 16)) /*!< PLL Main clock used as SAI1 block B clock source */ -#else -#define LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< External pin clock used as SAI1 block B clock source */ -#endif /* RCC_SAI1B_PLLSOURCE_SUPPORT */ -#endif /* RCC_DCKCFGR_SAI1BSRC */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** @defgroup RCC_LL_EC_SDIOx_CLKSOURCE Peripheral SDIO clock source selection - * @{ - */ -#define LL_RCC_SDIO_CLKSOURCE_PLL48CLK 0x00000000U /*!< PLL 48M domain clock used as SDIO clock */ -#if defined(RCC_DCKCFGR_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR_SDIOSEL /*!< System clock clock used as SDIO clock */ -#else -#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDIOSEL /*!< System clock clock used as SDIO clock */ -#endif /* RCC_DCKCFGR_SDIOSEL */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(DSI) -/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection - * @{ - */ -#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */ -#define LL_RCC_DSI_CLKSOURCE_PLL RCC_DCKCFGR_DSISEL /*!< PLL clock used as DSI byte lane clock source */ -/** - * @} - */ -#endif /* DSI */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ -#define LL_RCC_CEC_CLKSOURCE_LSE RCC_DCKCFGR2_CECSEL /*!< LSE oscillator clock used as CEC clock */ -/** - * @} - */ -#endif /* CEC */ - -/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection - * @{ - */ -#if defined(RCC_CFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE_PLLI2S 0x00000000U /*!< I2S oscillator clock used as I2S1 clock */ -#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CFGR_I2SSRC /*!< External pin clock used as I2S1 clock */ -#endif /* RCC_CFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2SSRC | 0x00000000U) /*!< PLL clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_1 >> 16)) /*!< PLL Main clock used as I2S1 clock source */ -#endif /* RCC_DCKCFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2S1SRC) -#define LL_RCC_I2S1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S1SRC | 0x00000000U) /*!< PLLI2S clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_1 >> 16)) /*!< PLL clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC >> 16)) /*!< PLL Main clock used as I2S1 clock source */ -#endif /* RCC_DCKCFGR_I2S1SRC */ -#if defined(RCC_DCKCFGR_I2S2SRC) -#define LL_RCC_I2S2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S2SRC | 0x00000000U) /*!< PLLI2S clock used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_0 >> 16)) /*!< External pin used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_1 >> 16)) /*!< PLL clock used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC >> 16)) /*!< PLL Main clock used as I2S2 clock source */ -#endif /* RCC_DCKCFGR_I2S2SRC */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** @defgroup RCC_LL_EC_CK48M_CLKSOURCE Peripheral 48Mhz domain clock source selection - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ -#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -#if defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_CK48M_CLKSOURCE_PLLI2S RCC_DCKCFGR2_CK48MSEL /*!< PLLI2S oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ - -#if defined(RNG) -/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection - * @{ - */ -#define LL_RCC_RNG_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as RNG clock source */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_RNG_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as RNG clock source */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_RNG_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as RNG clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -/** - * @} - */ -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection - * @{ - */ -#define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as USB clock source */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_USB_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as USB clock source */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_USB_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as USB clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -/** - * @} - */ -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) -/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM Audio clock source selection - * @{ - */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM1 Audio clock source */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | (RCC_DCKCFGR_CKDFSDM1ASEL << 16)) /*!< I2S2 clock used as DFSDM1 Audio clock source */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM2 Audio clock source */ -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | (RCC_DCKCFGR_CKDFSDM2ASEL << 16)) /*!< I2S2 clock used as DFSDM2 Audio clock source */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM clock source selection - * @{ - */ -#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM1 clock */ -#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM1 clock */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM2 clock */ -#define LL_RCC_DFSDM2_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM2 clock */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ -#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ - -#if defined(FMPI2C1) -/** @defgroup RCC_LL_EC_FMPI2C1 Peripheral FMPI2C get clock source - * @{ - */ -#define LL_RCC_FMPI2C1_CLKSOURCE RCC_DCKCFGR2_FMPI2C1SEL /*!< FMPI2C1 Clock source selection */ -/** - * @} - */ -#endif /* FMPI2C1 */ - -#if defined(SPDIFRX) -/** @defgroup RCC_LL_EC_SPDIFRX_CLKSOURCE Peripheral SPDIFRX clock source selection - * @{ - */ -#define LL_RCC_SPDIFRX1_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as SPDIFRX clock source */ -#define LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S RCC_DCKCFGR2_SPDIFRXSEL /*!< PLLI2S clock used as SPDIFRX clock source */ -/** - * @} - */ -#endif /* SPDIFRX */ - -#if defined(LPTIM1) -/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source - * @{ - */ -#define LL_RCC_LPTIM1_CLKSOURCE RCC_DCKCFGR2_LPTIM1SEL /*!< LPTIM1 Clock source selection */ -/** - * @} - */ -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_SAI1ASRC) -#define LL_RCC_SAI1_A_CLKSOURCE RCC_DCKCFGR_SAI1ASRC /*!< SAI1 block A Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1ASRC */ -#if defined(RCC_DCKCFGR_SAI1BSRC) -#define LL_RCC_SAI1_B_CLKSOURCE RCC_DCKCFGR_SAI1BSRC /*!< SAI1 block B Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1BSRC */ -#if defined(RCC_DCKCFGR_SAI1SRC) -#define LL_RCC_SAI1_CLKSOURCE RCC_DCKCFGR_SAI1SRC /*!< SAI1 Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI2SRC) -#define LL_RCC_SAI2_CLKSOURCE RCC_DCKCFGR_SAI2SRC /*!< SAI2 Clock source selection */ -#endif /* RCC_DCKCFGR_SAI2SRC */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(SDIO) -/** @defgroup RCC_LL_EC_SDIOx Peripheral SDIO get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR_SDIOSEL /*!< SDIO Clock source selection */ -#elif defined(RCC_DCKCFGR2_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR2_SDIOSEL /*!< SDIO Clock source selection */ -#else -#define LL_RCC_SDIO_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< SDIO Clock source selection */ -#endif -/** - * @} - */ -#endif /* SDIO */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** @defgroup RCC_LL_EC_CK48M Peripheral CK48M get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR_CK48MSEL /*!< CK48M Domain clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -#if defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< CK48M Domain clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(RNG) -/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_RNG_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< RNG Clock source selection */ -#else -#define LL_RCC_RNG_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< RNG Clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_USB_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< USB Clock source selection */ -#else -#define LL_RCC_USB_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< USB Clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE RCC_DCKCFGR2_CECSEL /*!< CEC Clock source selection */ -/** - * @} - */ -#endif /* CEC */ - -/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source - * @{ - */ -#if defined(RCC_CFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S1 Clock source selection */ -#endif /* RCC_CFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2SSRC /*!< I2S1 Clock source selection */ -#endif /* RCC_DCKCFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2S1SRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2S1SRC /*!< I2S1 Clock source selection */ -#endif /* RCC_DCKCFGR_I2S1SRC */ -#if defined(RCC_DCKCFGR_I2S2SRC) -#define LL_RCC_I2S2_CLKSOURCE RCC_DCKCFGR_I2S2SRC /*!< I2S2 Clock source selection */ -#endif /* RCC_DCKCFGR_I2S2SRC */ -/** - * @} - */ - -#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) -/** @defgroup RCC_LL_EC_DFSDM_AUDIO Peripheral DFSDM Audio get clock source - * @{ - */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM1ASEL /*!< DFSDM1 Audio Clock source selection */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM2ASEL /*!< DFSDM2 Audio Clock source selection */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source - * @{ - */ -#define LL_RCC_DFSDM1_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM1 Clock source selection */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM2 Clock source selection */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ -#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ - -#if defined(SPDIFRX) -/** @defgroup RCC_LL_EC_SPDIFRX Peripheral SPDIFRX get clock source - * @{ - */ -#define LL_RCC_SPDIFRX1_CLKSOURCE RCC_DCKCFGR2_SPDIFRXSEL /*!< SPDIFRX Clock source selection */ -/** - * @} - */ -#endif /* SPDIFRX */ - -#if defined(DSI) -/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source - * @{ - */ -#define LL_RCC_DSI_CLKSOURCE RCC_DCKCFGR_DSISEL /*!< DSI Clock source selection */ -/** - * @} - */ -#endif /* DSI */ - -#if defined(LTDC) -/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source - * @{ - */ -#define LL_RCC_LTDC_CLKSOURCE RCC_DCKCFGR_PLLSAIDIVR /*!< LTDC Clock source selection */ -/** - * @} - */ -#endif /* LTDC */ - - -/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection - * @{ - */ -#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_HSE RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by HSE prescaler used as RTC clock */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_TIMPRE) -/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection - * @{ - */ -#define LL_RCC_TIM_PRESCALER_TWICE 0x00000000U /*!< Timers clock to twice PCLK */ -#define LL_RCC_TIM_PRESCALER_FOUR_TIMES RCC_DCKCFGR_TIMPRE /*!< Timers clock to four time PCLK */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_TIMPRE */ - -/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLI2S and PLLSAI entry clock source - * @{ - */ -#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) -#define LL_RCC_PLLI2SSOURCE_PIN (RCC_PLLI2SCFGR_PLLI2SSRC | 0x80U) /*!< I2S External pin input clock selected as PLLI2S entry clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLM_DIV PLL, PLLI2S and PLLSAI division factor - * @{ - */ -#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 2 */ -#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 3 */ -#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 4 */ -#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 5 */ -#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 6 */ -#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 7 */ -#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 8 */ -#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 9 */ -#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 10 */ -#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 11 */ -#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 12 */ -#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 13 */ -#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 14 */ -#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 15 */ -#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 16 */ -#define LL_RCC_PLLM_DIV_17 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 17 */ -#define LL_RCC_PLLM_DIV_18 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 18 */ -#define LL_RCC_PLLM_DIV_19 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 19 */ -#define LL_RCC_PLLM_DIV_20 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 20 */ -#define LL_RCC_PLLM_DIV_21 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 21 */ -#define LL_RCC_PLLM_DIV_22 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 22 */ -#define LL_RCC_PLLM_DIV_23 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 23 */ -#define LL_RCC_PLLM_DIV_24 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 24 */ -#define LL_RCC_PLLM_DIV_25 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 25 */ -#define LL_RCC_PLLM_DIV_26 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 26 */ -#define LL_RCC_PLLM_DIV_27 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 27 */ -#define LL_RCC_PLLM_DIV_28 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 28 */ -#define LL_RCC_PLLM_DIV_29 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 29 */ -#define LL_RCC_PLLM_DIV_30 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 30 */ -#define LL_RCC_PLLM_DIV_31 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 31 */ -#define LL_RCC_PLLM_DIV_32 (RCC_PLLCFGR_PLLM_5) /*!< PLL, PLLI2S and PLLSAI division factor by 32 */ -#define LL_RCC_PLLM_DIV_33 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 33 */ -#define LL_RCC_PLLM_DIV_34 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 34 */ -#define LL_RCC_PLLM_DIV_35 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 35 */ -#define LL_RCC_PLLM_DIV_36 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 36 */ -#define LL_RCC_PLLM_DIV_37 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 37 */ -#define LL_RCC_PLLM_DIV_38 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 38 */ -#define LL_RCC_PLLM_DIV_39 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 39 */ -#define LL_RCC_PLLM_DIV_40 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 40 */ -#define LL_RCC_PLLM_DIV_41 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 41 */ -#define LL_RCC_PLLM_DIV_42 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 42 */ -#define LL_RCC_PLLM_DIV_43 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 43 */ -#define LL_RCC_PLLM_DIV_44 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 44 */ -#define LL_RCC_PLLM_DIV_45 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 45 */ -#define LL_RCC_PLLM_DIV_46 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 46 */ -#define LL_RCC_PLLM_DIV_47 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 47 */ -#define LL_RCC_PLLM_DIV_48 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 48 */ -#define LL_RCC_PLLM_DIV_49 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 49 */ -#define LL_RCC_PLLM_DIV_50 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 50 */ -#define LL_RCC_PLLM_DIV_51 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 51 */ -#define LL_RCC_PLLM_DIV_52 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 52 */ -#define LL_RCC_PLLM_DIV_53 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 53 */ -#define LL_RCC_PLLM_DIV_54 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 54 */ -#define LL_RCC_PLLM_DIV_55 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 55 */ -#define LL_RCC_PLLM_DIV_56 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 56 */ -#define LL_RCC_PLLM_DIV_57 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 57 */ -#define LL_RCC_PLLM_DIV_58 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 58 */ -#define LL_RCC_PLLM_DIV_59 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 59 */ -#define LL_RCC_PLLM_DIV_60 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 60 */ -#define LL_RCC_PLLM_DIV_61 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 61 */ -#define LL_RCC_PLLM_DIV_62 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 62 */ -#define LL_RCC_PLLM_DIV_63 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 63 */ -/** - * @} - */ - -#if defined(RCC_PLLCFGR_PLLR) -/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) - * @{ - */ -#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ -#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ -#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ -#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ -#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ -#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ -/** - * @} - */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_DCKCFGR_PLLDIVR) -/** @defgroup RCC_LL_EC_PLLDIVR PLLDIVR division factor (PLLDIVR) - * @{ - */ -#define LL_RCC_PLLDIVR_DIV_1 (RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 1 */ -#define LL_RCC_PLLDIVR_DIV_2 (RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 2 */ -#define LL_RCC_PLLDIVR_DIV_3 (RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 3 */ -#define LL_RCC_PLLDIVR_DIV_4 (RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 4 */ -#define LL_RCC_PLLDIVR_DIV_5 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 5 */ -#define LL_RCC_PLLDIVR_DIV_6 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 6 */ -#define LL_RCC_PLLDIVR_DIV_7 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 7 */ -#define LL_RCC_PLLDIVR_DIV_8 (RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 8 */ -#define LL_RCC_PLLDIVR_DIV_9 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 9 */ -#define LL_RCC_PLLDIVR_DIV_10 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 10 */ -#define LL_RCC_PLLDIVR_DIV_11 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 11 */ -#define LL_RCC_PLLDIVR_DIV_12 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 12 */ -#define LL_RCC_PLLDIVR_DIV_13 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 13 */ -#define LL_RCC_PLLDIVR_DIV_14 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 14 */ -#define LL_RCC_PLLDIVR_DIV_15 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 15 */ -#define LL_RCC_PLLDIVR_DIV_16 (RCC_DCKCFGR_PLLDIVR_4) /*!< PLL division factor for PLLDIVR output by 16 */ -#define LL_RCC_PLLDIVR_DIV_17 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 17 */ -#define LL_RCC_PLLDIVR_DIV_18 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 18 */ -#define LL_RCC_PLLDIVR_DIV_19 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 19 */ -#define LL_RCC_PLLDIVR_DIV_20 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 20 */ -#define LL_RCC_PLLDIVR_DIV_21 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 21 */ -#define LL_RCC_PLLDIVR_DIV_22 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 22 */ -#define LL_RCC_PLLDIVR_DIV_23 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 23 */ -#define LL_RCC_PLLDIVR_DIV_24 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 24 */ -#define LL_RCC_PLLDIVR_DIV_25 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 25 */ -#define LL_RCC_PLLDIVR_DIV_26 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 26 */ -#define LL_RCC_PLLDIVR_DIV_27 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 27 */ -#define LL_RCC_PLLDIVR_DIV_28 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 28 */ -#define LL_RCC_PLLDIVR_DIV_29 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 29 */ -#define LL_RCC_PLLDIVR_DIV_30 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 30 */ -#define LL_RCC_PLLDIVR_DIV_31 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 31 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLDIVR */ - -/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) - * @{ - */ -#define LL_RCC_PLLP_DIV_2 0x00000000U /*!< Main PLL division factor for PLLP output by 2 */ -#define LL_RCC_PLLP_DIV_4 RCC_PLLCFGR_PLLP_0 /*!< Main PLL division factor for PLLP output by 4 */ -#define LL_RCC_PLLP_DIV_6 RCC_PLLCFGR_PLLP_1 /*!< Main PLL division factor for PLLP output by 6 */ -#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 8 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) - * @{ - */ -#define LL_RCC_PLLQ_DIV_2 RCC_PLLCFGR_PLLQ_1 /*!< Main PLL division factor for PLLQ output by 2 */ -#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 3 */ -#define LL_RCC_PLLQ_DIV_4 RCC_PLLCFGR_PLLQ_2 /*!< Main PLL division factor for PLLQ output by 4 */ -#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 5 */ -#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */ -#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 7 */ -#define LL_RCC_PLLQ_DIV_8 RCC_PLLCFGR_PLLQ_3 /*!< Main PLL division factor for PLLQ output by 8 */ -#define LL_RCC_PLLQ_DIV_9 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 9 */ -#define LL_RCC_PLLQ_DIV_10 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 10 */ -#define LL_RCC_PLLQ_DIV_11 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 11 */ -#define LL_RCC_PLLQ_DIV_12 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 12 */ -#define LL_RCC_PLLQ_DIV_13 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 13 */ -#define LL_RCC_PLLQ_DIV_14 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 14 */ -#define LL_RCC_PLLQ_DIV_15 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 15 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLL_SPRE_SEL PLL Spread Spectrum Selection - * @{ - */ -#define LL_RCC_SPREAD_SELECT_CENTER 0x00000000U /*!< PLL center spread spectrum selection */ -#define LL_RCC_SPREAD_SELECT_DOWN RCC_SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */ -/** - * @} - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** @defgroup RCC_LL_EC_PLLI2SM PLLI2SM division factor (PLLI2SM) - * @{ - */ -#if defined(RCC_PLLI2SCFGR_PLLI2SM) -#define LL_RCC_PLLI2SM_DIV_2 (RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 2 */ -#define LL_RCC_PLLI2SM_DIV_3 (RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 3 */ -#define LL_RCC_PLLI2SM_DIV_4 (RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 4 */ -#define LL_RCC_PLLI2SM_DIV_5 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 5 */ -#define LL_RCC_PLLI2SM_DIV_6 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 6 */ -#define LL_RCC_PLLI2SM_DIV_7 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 7 */ -#define LL_RCC_PLLI2SM_DIV_8 (RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 8 */ -#define LL_RCC_PLLI2SM_DIV_9 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 9 */ -#define LL_RCC_PLLI2SM_DIV_10 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 10 */ -#define LL_RCC_PLLI2SM_DIV_11 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 11 */ -#define LL_RCC_PLLI2SM_DIV_12 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 12 */ -#define LL_RCC_PLLI2SM_DIV_13 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 13 */ -#define LL_RCC_PLLI2SM_DIV_14 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 14 */ -#define LL_RCC_PLLI2SM_DIV_15 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 15 */ -#define LL_RCC_PLLI2SM_DIV_16 (RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 16 */ -#define LL_RCC_PLLI2SM_DIV_17 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 17 */ -#define LL_RCC_PLLI2SM_DIV_18 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 18 */ -#define LL_RCC_PLLI2SM_DIV_19 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 19 */ -#define LL_RCC_PLLI2SM_DIV_20 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 20 */ -#define LL_RCC_PLLI2SM_DIV_21 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 21 */ -#define LL_RCC_PLLI2SM_DIV_22 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 22 */ -#define LL_RCC_PLLI2SM_DIV_23 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 23 */ -#define LL_RCC_PLLI2SM_DIV_24 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 24 */ -#define LL_RCC_PLLI2SM_DIV_25 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 25 */ -#define LL_RCC_PLLI2SM_DIV_26 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 26 */ -#define LL_RCC_PLLI2SM_DIV_27 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 27 */ -#define LL_RCC_PLLI2SM_DIV_28 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 28 */ -#define LL_RCC_PLLI2SM_DIV_29 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 29 */ -#define LL_RCC_PLLI2SM_DIV_30 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 30 */ -#define LL_RCC_PLLI2SM_DIV_31 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 31 */ -#define LL_RCC_PLLI2SM_DIV_32 (RCC_PLLI2SCFGR_PLLI2SM_5) /*!< PLLI2S division factor for PLLI2SM output by 32 */ -#define LL_RCC_PLLI2SM_DIV_33 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 33 */ -#define LL_RCC_PLLI2SM_DIV_34 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 34 */ -#define LL_RCC_PLLI2SM_DIV_35 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 35 */ -#define LL_RCC_PLLI2SM_DIV_36 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 36 */ -#define LL_RCC_PLLI2SM_DIV_37 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 37 */ -#define LL_RCC_PLLI2SM_DIV_38 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 38 */ -#define LL_RCC_PLLI2SM_DIV_39 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 39 */ -#define LL_RCC_PLLI2SM_DIV_40 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 40 */ -#define LL_RCC_PLLI2SM_DIV_41 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 41 */ -#define LL_RCC_PLLI2SM_DIV_42 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 42 */ -#define LL_RCC_PLLI2SM_DIV_43 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 43 */ -#define LL_RCC_PLLI2SM_DIV_44 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 44 */ -#define LL_RCC_PLLI2SM_DIV_45 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 45 */ -#define LL_RCC_PLLI2SM_DIV_46 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 46 */ -#define LL_RCC_PLLI2SM_DIV_47 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 47 */ -#define LL_RCC_PLLI2SM_DIV_48 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 48 */ -#define LL_RCC_PLLI2SM_DIV_49 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 49 */ -#define LL_RCC_PLLI2SM_DIV_50 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 50 */ -#define LL_RCC_PLLI2SM_DIV_51 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 51 */ -#define LL_RCC_PLLI2SM_DIV_52 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 52 */ -#define LL_RCC_PLLI2SM_DIV_53 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 53 */ -#define LL_RCC_PLLI2SM_DIV_54 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 54 */ -#define LL_RCC_PLLI2SM_DIV_55 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 55 */ -#define LL_RCC_PLLI2SM_DIV_56 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 56 */ -#define LL_RCC_PLLI2SM_DIV_57 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 57 */ -#define LL_RCC_PLLI2SM_DIV_58 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 58 */ -#define LL_RCC_PLLI2SM_DIV_59 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 59 */ -#define LL_RCC_PLLI2SM_DIV_60 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 60 */ -#define LL_RCC_PLLI2SM_DIV_61 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 61 */ -#define LL_RCC_PLLI2SM_DIV_62 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 62 */ -#define LL_RCC_PLLI2SM_DIV_63 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 63 */ -#else -#define LL_RCC_PLLI2SM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLI2S division factor for PLLI2SM output by 2 */ -#define LL_RCC_PLLI2SM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLI2S division factor for PLLI2SM output by 3 */ -#define LL_RCC_PLLI2SM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLI2S division factor for PLLI2SM output by 4 */ -#define LL_RCC_PLLI2SM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLI2S division factor for PLLI2SM output by 5 */ -#define LL_RCC_PLLI2SM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLI2S division factor for PLLI2SM output by 6 */ -#define LL_RCC_PLLI2SM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLI2S division factor for PLLI2SM output by 7 */ -#define LL_RCC_PLLI2SM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLI2S division factor for PLLI2SM output by 8 */ -#define LL_RCC_PLLI2SM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLI2S division factor for PLLI2SM output by 9 */ -#define LL_RCC_PLLI2SM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLI2S division factor for PLLI2SM output by 10 */ -#define LL_RCC_PLLI2SM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLI2S division factor for PLLI2SM output by 11 */ -#define LL_RCC_PLLI2SM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLI2S division factor for PLLI2SM output by 12 */ -#define LL_RCC_PLLI2SM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLI2S division factor for PLLI2SM output by 13 */ -#define LL_RCC_PLLI2SM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLI2S division factor for PLLI2SM output by 14 */ -#define LL_RCC_PLLI2SM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLI2S division factor for PLLI2SM output by 15 */ -#define LL_RCC_PLLI2SM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLI2S division factor for PLLI2SM output by 16 */ -#define LL_RCC_PLLI2SM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLI2S division factor for PLLI2SM output by 17 */ -#define LL_RCC_PLLI2SM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLI2S division factor for PLLI2SM output by 18 */ -#define LL_RCC_PLLI2SM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLI2S division factor for PLLI2SM output by 19 */ -#define LL_RCC_PLLI2SM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLI2S division factor for PLLI2SM output by 20 */ -#define LL_RCC_PLLI2SM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLI2S division factor for PLLI2SM output by 21 */ -#define LL_RCC_PLLI2SM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLI2S division factor for PLLI2SM output by 22 */ -#define LL_RCC_PLLI2SM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLI2S division factor for PLLI2SM output by 23 */ -#define LL_RCC_PLLI2SM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLI2S division factor for PLLI2SM output by 24 */ -#define LL_RCC_PLLI2SM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLI2S division factor for PLLI2SM output by 25 */ -#define LL_RCC_PLLI2SM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLI2S division factor for PLLI2SM output by 26 */ -#define LL_RCC_PLLI2SM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLI2S division factor for PLLI2SM output by 27 */ -#define LL_RCC_PLLI2SM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLI2S division factor for PLLI2SM output by 28 */ -#define LL_RCC_PLLI2SM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLI2S division factor for PLLI2SM output by 29 */ -#define LL_RCC_PLLI2SM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLI2S division factor for PLLI2SM output by 30 */ -#define LL_RCC_PLLI2SM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLI2S division factor for PLLI2SM output by 31 */ -#define LL_RCC_PLLI2SM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLI2S division factor for PLLI2SM output by 32 */ -#define LL_RCC_PLLI2SM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLI2S division factor for PLLI2SM output by 33 */ -#define LL_RCC_PLLI2SM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLI2S division factor for PLLI2SM output by 34 */ -#define LL_RCC_PLLI2SM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLI2S division factor for PLLI2SM output by 35 */ -#define LL_RCC_PLLI2SM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLI2S division factor for PLLI2SM output by 36 */ -#define LL_RCC_PLLI2SM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLI2S division factor for PLLI2SM output by 37 */ -#define LL_RCC_PLLI2SM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLI2S division factor for PLLI2SM output by 38 */ -#define LL_RCC_PLLI2SM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLI2S division factor for PLLI2SM output by 39 */ -#define LL_RCC_PLLI2SM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLI2S division factor for PLLI2SM output by 40 */ -#define LL_RCC_PLLI2SM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLI2S division factor for PLLI2SM output by 41 */ -#define LL_RCC_PLLI2SM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLI2S division factor for PLLI2SM output by 42 */ -#define LL_RCC_PLLI2SM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLI2S division factor for PLLI2SM output by 43 */ -#define LL_RCC_PLLI2SM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLI2S division factor for PLLI2SM output by 44 */ -#define LL_RCC_PLLI2SM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLI2S division factor for PLLI2SM output by 45 */ -#define LL_RCC_PLLI2SM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLI2S division factor for PLLI2SM output by 46 */ -#define LL_RCC_PLLI2SM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLI2S division factor for PLLI2SM output by 47 */ -#define LL_RCC_PLLI2SM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLI2S division factor for PLLI2SM output by 48 */ -#define LL_RCC_PLLI2SM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLI2S division factor for PLLI2SM output by 49 */ -#define LL_RCC_PLLI2SM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLI2S division factor for PLLI2SM output by 50 */ -#define LL_RCC_PLLI2SM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLI2S division factor for PLLI2SM output by 51 */ -#define LL_RCC_PLLI2SM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLI2S division factor for PLLI2SM output by 52 */ -#define LL_RCC_PLLI2SM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLI2S division factor for PLLI2SM output by 53 */ -#define LL_RCC_PLLI2SM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLI2S division factor for PLLI2SM output by 54 */ -#define LL_RCC_PLLI2SM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLI2S division factor for PLLI2SM output by 55 */ -#define LL_RCC_PLLI2SM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLI2S division factor for PLLI2SM output by 56 */ -#define LL_RCC_PLLI2SM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLI2S division factor for PLLI2SM output by 57 */ -#define LL_RCC_PLLI2SM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLI2S division factor for PLLI2SM output by 58 */ -#define LL_RCC_PLLI2SM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLI2S division factor for PLLI2SM output by 59 */ -#define LL_RCC_PLLI2SM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLI2S division factor for PLLI2SM output by 60 */ -#define LL_RCC_PLLI2SM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLI2S division factor for PLLI2SM output by 61 */ -#define LL_RCC_PLLI2SM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLI2S division factor for PLLI2SM output by 62 */ -#define LL_RCC_PLLI2SM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLI2S division factor for PLLI2SM output by 63 */ -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -/** - * @} - */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) -/** @defgroup RCC_LL_EC_PLLI2SQ PLLI2SQ division factor (PLLI2SQ) - * @{ - */ -#define LL_RCC_PLLI2SQ_DIV_2 RCC_PLLI2SCFGR_PLLI2SQ_1 /*!< PLLI2S division factor for PLLI2SQ output by 2 */ -#define LL_RCC_PLLI2SQ_DIV_3 (RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 3 */ -#define LL_RCC_PLLI2SQ_DIV_4 RCC_PLLI2SCFGR_PLLI2SQ_2 /*!< PLLI2S division factor for PLLI2SQ output by 4 */ -#define LL_RCC_PLLI2SQ_DIV_5 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 5 */ -#define LL_RCC_PLLI2SQ_DIV_6 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 6 */ -#define LL_RCC_PLLI2SQ_DIV_7 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 7 */ -#define LL_RCC_PLLI2SQ_DIV_8 RCC_PLLI2SCFGR_PLLI2SQ_3 /*!< PLLI2S division factor for PLLI2SQ output by 8 */ -#define LL_RCC_PLLI2SQ_DIV_9 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 9 */ -#define LL_RCC_PLLI2SQ_DIV_10 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 10 */ -#define LL_RCC_PLLI2SQ_DIV_11 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 11 */ -#define LL_RCC_PLLI2SQ_DIV_12 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2) /*!< PLLI2S division factor for PLLI2SQ output by 12 */ -#define LL_RCC_PLLI2SQ_DIV_13 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 13 */ -#define LL_RCC_PLLI2SQ_DIV_14 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 14 */ -#define LL_RCC_PLLI2SQ_DIV_15 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 15 */ -/** - * @} - */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** @defgroup RCC_LL_EC_PLLI2SDIVQ PLLI2SDIVQ division factor (PLLI2SDIVQ) - * @{ - */ -#define LL_RCC_PLLI2SDIVQ_DIV_1 0x00000000U /*!< PLLI2S division factor for PLLI2SDIVQ output by 1 */ -#define LL_RCC_PLLI2SDIVQ_DIV_2 RCC_DCKCFGR_PLLI2SDIVQ_0 /*!< PLLI2S division factor for PLLI2SDIVQ output by 2 */ -#define LL_RCC_PLLI2SDIVQ_DIV_3 RCC_DCKCFGR_PLLI2SDIVQ_1 /*!< PLLI2S division factor for PLLI2SDIVQ output by 3 */ -#define LL_RCC_PLLI2SDIVQ_DIV_4 (RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 4 */ -#define LL_RCC_PLLI2SDIVQ_DIV_5 RCC_DCKCFGR_PLLI2SDIVQ_2 /*!< PLLI2S division factor for PLLI2SDIVQ output by 5 */ -#define LL_RCC_PLLI2SDIVQ_DIV_6 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 6 */ -#define LL_RCC_PLLI2SDIVQ_DIV_7 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 7 */ -#define LL_RCC_PLLI2SDIVQ_DIV_8 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 8 */ -#define LL_RCC_PLLI2SDIVQ_DIV_9 RCC_DCKCFGR_PLLI2SDIVQ_3 /*!< PLLI2S division factor for PLLI2SDIVQ output by 9 */ -#define LL_RCC_PLLI2SDIVQ_DIV_10 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 10 */ -#define LL_RCC_PLLI2SDIVQ_DIV_11 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 11 */ -#define LL_RCC_PLLI2SDIVQ_DIV_12 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 12 */ -#define LL_RCC_PLLI2SDIVQ_DIV_13 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 13 */ -#define LL_RCC_PLLI2SDIVQ_DIV_14 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 14 */ -#define LL_RCC_PLLI2SDIVQ_DIV_15 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 15 */ -#define LL_RCC_PLLI2SDIVQ_DIV_16 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 16 */ -#define LL_RCC_PLLI2SDIVQ_DIV_17 RCC_DCKCFGR_PLLI2SDIVQ_4 /*!< PLLI2S division factor for PLLI2SDIVQ output by 17 */ -#define LL_RCC_PLLI2SDIVQ_DIV_18 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 18 */ -#define LL_RCC_PLLI2SDIVQ_DIV_19 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 19 */ -#define LL_RCC_PLLI2SDIVQ_DIV_20 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 20 */ -#define LL_RCC_PLLI2SDIVQ_DIV_21 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 21 */ -#define LL_RCC_PLLI2SDIVQ_DIV_22 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 22 */ -#define LL_RCC_PLLI2SDIVQ_DIV_23 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 23 */ -#define LL_RCC_PLLI2SDIVQ_DIV_24 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 24 */ -#define LL_RCC_PLLI2SDIVQ_DIV_25 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3) /*!< PLLI2S division factor for PLLI2SDIVQ output by 25 */ -#define LL_RCC_PLLI2SDIVQ_DIV_26 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 26 */ -#define LL_RCC_PLLI2SDIVQ_DIV_27 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 27 */ -#define LL_RCC_PLLI2SDIVQ_DIV_28 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 28 */ -#define LL_RCC_PLLI2SDIVQ_DIV_29 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 29 */ -#define LL_RCC_PLLI2SDIVQ_DIV_30 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 30 */ -#define LL_RCC_PLLI2SDIVQ_DIV_31 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 31 */ -#define LL_RCC_PLLI2SDIVQ_DIV_32 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 32 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVR) -/** @defgroup RCC_LL_EC_PLLI2SDIVR PLLI2SDIVR division factor (PLLI2SDIVR) - * @{ - */ -#define LL_RCC_PLLI2SDIVR_DIV_1 (RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 1 */ -#define LL_RCC_PLLI2SDIVR_DIV_2 (RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 2 */ -#define LL_RCC_PLLI2SDIVR_DIV_3 (RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 3 */ -#define LL_RCC_PLLI2SDIVR_DIV_4 (RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 4 */ -#define LL_RCC_PLLI2SDIVR_DIV_5 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 5 */ -#define LL_RCC_PLLI2SDIVR_DIV_6 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 6 */ -#define LL_RCC_PLLI2SDIVR_DIV_7 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 7 */ -#define LL_RCC_PLLI2SDIVR_DIV_8 (RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 8 */ -#define LL_RCC_PLLI2SDIVR_DIV_9 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 9 */ -#define LL_RCC_PLLI2SDIVR_DIV_10 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 10 */ -#define LL_RCC_PLLI2SDIVR_DIV_11 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 11 */ -#define LL_RCC_PLLI2SDIVR_DIV_12 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 12 */ -#define LL_RCC_PLLI2SDIVR_DIV_13 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 13 */ -#define LL_RCC_PLLI2SDIVR_DIV_14 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 14 */ -#define LL_RCC_PLLI2SDIVR_DIV_15 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 15 */ -#define LL_RCC_PLLI2SDIVR_DIV_16 (RCC_DCKCFGR_PLLI2SDIVR_4) /*!< PLLI2S division factor for PLLI2SDIVR output by 16 */ -#define LL_RCC_PLLI2SDIVR_DIV_17 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 17 */ -#define LL_RCC_PLLI2SDIVR_DIV_18 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 18 */ -#define LL_RCC_PLLI2SDIVR_DIV_19 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 19 */ -#define LL_RCC_PLLI2SDIVR_DIV_20 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 20 */ -#define LL_RCC_PLLI2SDIVR_DIV_21 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 21 */ -#define LL_RCC_PLLI2SDIVR_DIV_22 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 22 */ -#define LL_RCC_PLLI2SDIVR_DIV_23 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 23 */ -#define LL_RCC_PLLI2SDIVR_DIV_24 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 24 */ -#define LL_RCC_PLLI2SDIVR_DIV_25 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 25 */ -#define LL_RCC_PLLI2SDIVR_DIV_26 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 26 */ -#define LL_RCC_PLLI2SDIVR_DIV_27 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 27 */ -#define LL_RCC_PLLI2SDIVR_DIV_28 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 28 */ -#define LL_RCC_PLLI2SDIVR_DIV_29 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 29 */ -#define LL_RCC_PLLI2SDIVR_DIV_30 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 30 */ -#define LL_RCC_PLLI2SDIVR_DIV_31 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 31 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLI2SDIVR */ - -/** @defgroup RCC_LL_EC_PLLI2SR PLLI2SR division factor (PLLI2SR) - * @{ - */ -#define LL_RCC_PLLI2SR_DIV_2 RCC_PLLI2SCFGR_PLLI2SR_1 /*!< PLLI2S division factor for PLLI2SR output by 2 */ -#define LL_RCC_PLLI2SR_DIV_3 (RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 3 */ -#define LL_RCC_PLLI2SR_DIV_4 RCC_PLLI2SCFGR_PLLI2SR_2 /*!< PLLI2S division factor for PLLI2SR output by 4 */ -#define LL_RCC_PLLI2SR_DIV_5 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 5 */ -#define LL_RCC_PLLI2SR_DIV_6 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1) /*!< PLLI2S division factor for PLLI2SR output by 6 */ -#define LL_RCC_PLLI2SR_DIV_7 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 7 */ -/** - * @} - */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SP) -/** @defgroup RCC_LL_EC_PLLI2SP PLLI2SP division factor (PLLI2SP) - * @{ - */ -#define LL_RCC_PLLI2SP_DIV_2 0x00000000U /*!< PLLI2S division factor for PLLI2SP output by 2 */ -#define LL_RCC_PLLI2SP_DIV_4 RCC_PLLI2SCFGR_PLLI2SP_0 /*!< PLLI2S division factor for PLLI2SP output by 4 */ -#define LL_RCC_PLLI2SP_DIV_6 RCC_PLLI2SCFGR_PLLI2SP_1 /*!< PLLI2S division factor for PLLI2SP output by 6 */ -#define LL_RCC_PLLI2SP_DIV_8 (RCC_PLLI2SCFGR_PLLI2SP_1 | RCC_PLLI2SCFGR_PLLI2SP_0) /*!< PLLI2S division factor for PLLI2SP output by 8 */ -/** - * @} - */ -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** @defgroup RCC_LL_EC_PLLSAIM PLLSAIM division factor (PLLSAIM or PLLM) - * @{ - */ -#if defined(RCC_PLLSAICFGR_PLLSAIM) -#define LL_RCC_PLLSAIM_DIV_2 (RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 2 */ -#define LL_RCC_PLLSAIM_DIV_3 (RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 3 */ -#define LL_RCC_PLLSAIM_DIV_4 (RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 4 */ -#define LL_RCC_PLLSAIM_DIV_5 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 5 */ -#define LL_RCC_PLLSAIM_DIV_6 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 6 */ -#define LL_RCC_PLLSAIM_DIV_7 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 7 */ -#define LL_RCC_PLLSAIM_DIV_8 (RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 8 */ -#define LL_RCC_PLLSAIM_DIV_9 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 9 */ -#define LL_RCC_PLLSAIM_DIV_10 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 10 */ -#define LL_RCC_PLLSAIM_DIV_11 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 11 */ -#define LL_RCC_PLLSAIM_DIV_12 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 12 */ -#define LL_RCC_PLLSAIM_DIV_13 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 13 */ -#define LL_RCC_PLLSAIM_DIV_14 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 14 */ -#define LL_RCC_PLLSAIM_DIV_15 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 15 */ -#define LL_RCC_PLLSAIM_DIV_16 (RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 16 */ -#define LL_RCC_PLLSAIM_DIV_17 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 17 */ -#define LL_RCC_PLLSAIM_DIV_18 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 18 */ -#define LL_RCC_PLLSAIM_DIV_19 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 19 */ -#define LL_RCC_PLLSAIM_DIV_20 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 20 */ -#define LL_RCC_PLLSAIM_DIV_21 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 21 */ -#define LL_RCC_PLLSAIM_DIV_22 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 22 */ -#define LL_RCC_PLLSAIM_DIV_23 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 23 */ -#define LL_RCC_PLLSAIM_DIV_24 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 24 */ -#define LL_RCC_PLLSAIM_DIV_25 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 25 */ -#define LL_RCC_PLLSAIM_DIV_26 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 26 */ -#define LL_RCC_PLLSAIM_DIV_27 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 27 */ -#define LL_RCC_PLLSAIM_DIV_28 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 28 */ -#define LL_RCC_PLLSAIM_DIV_29 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 29 */ -#define LL_RCC_PLLSAIM_DIV_30 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 30 */ -#define LL_RCC_PLLSAIM_DIV_31 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 31 */ -#define LL_RCC_PLLSAIM_DIV_32 (RCC_PLLSAICFGR_PLLSAIM_5) /*!< PLLSAI division factor for PLLSAIM output by 32 */ -#define LL_RCC_PLLSAIM_DIV_33 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 33 */ -#define LL_RCC_PLLSAIM_DIV_34 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 34 */ -#define LL_RCC_PLLSAIM_DIV_35 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 35 */ -#define LL_RCC_PLLSAIM_DIV_36 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 36 */ -#define LL_RCC_PLLSAIM_DIV_37 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 37 */ -#define LL_RCC_PLLSAIM_DIV_38 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 38 */ -#define LL_RCC_PLLSAIM_DIV_39 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 39 */ -#define LL_RCC_PLLSAIM_DIV_40 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 40 */ -#define LL_RCC_PLLSAIM_DIV_41 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 41 */ -#define LL_RCC_PLLSAIM_DIV_42 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 42 */ -#define LL_RCC_PLLSAIM_DIV_43 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 43 */ -#define LL_RCC_PLLSAIM_DIV_44 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 44 */ -#define LL_RCC_PLLSAIM_DIV_45 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 45 */ -#define LL_RCC_PLLSAIM_DIV_46 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 46 */ -#define LL_RCC_PLLSAIM_DIV_47 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 47 */ -#define LL_RCC_PLLSAIM_DIV_48 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 48 */ -#define LL_RCC_PLLSAIM_DIV_49 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 49 */ -#define LL_RCC_PLLSAIM_DIV_50 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 50 */ -#define LL_RCC_PLLSAIM_DIV_51 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 51 */ -#define LL_RCC_PLLSAIM_DIV_52 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 52 */ -#define LL_RCC_PLLSAIM_DIV_53 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 53 */ -#define LL_RCC_PLLSAIM_DIV_54 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 54 */ -#define LL_RCC_PLLSAIM_DIV_55 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 55 */ -#define LL_RCC_PLLSAIM_DIV_56 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 56 */ -#define LL_RCC_PLLSAIM_DIV_57 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 57 */ -#define LL_RCC_PLLSAIM_DIV_58 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 58 */ -#define LL_RCC_PLLSAIM_DIV_59 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 59 */ -#define LL_RCC_PLLSAIM_DIV_60 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 60 */ -#define LL_RCC_PLLSAIM_DIV_61 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 61 */ -#define LL_RCC_PLLSAIM_DIV_62 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 62 */ -#define LL_RCC_PLLSAIM_DIV_63 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 63 */ -#else -#define LL_RCC_PLLSAIM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLSAI division factor for PLLSAIM output by 2 */ -#define LL_RCC_PLLSAIM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLSAI division factor for PLLSAIM output by 3 */ -#define LL_RCC_PLLSAIM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLSAI division factor for PLLSAIM output by 4 */ -#define LL_RCC_PLLSAIM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLSAI division factor for PLLSAIM output by 5 */ -#define LL_RCC_PLLSAIM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLSAI division factor for PLLSAIM output by 6 */ -#define LL_RCC_PLLSAIM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLSAI division factor for PLLSAIM output by 7 */ -#define LL_RCC_PLLSAIM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLSAI division factor for PLLSAIM output by 8 */ -#define LL_RCC_PLLSAIM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLSAI division factor for PLLSAIM output by 9 */ -#define LL_RCC_PLLSAIM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLSAI division factor for PLLSAIM output by 10 */ -#define LL_RCC_PLLSAIM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLSAI division factor for PLLSAIM output by 11 */ -#define LL_RCC_PLLSAIM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLSAI division factor for PLLSAIM output by 12 */ -#define LL_RCC_PLLSAIM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLSAI division factor for PLLSAIM output by 13 */ -#define LL_RCC_PLLSAIM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLSAI division factor for PLLSAIM output by 14 */ -#define LL_RCC_PLLSAIM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLSAI division factor for PLLSAIM output by 15 */ -#define LL_RCC_PLLSAIM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLSAI division factor for PLLSAIM output by 16 */ -#define LL_RCC_PLLSAIM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLSAI division factor for PLLSAIM output by 17 */ -#define LL_RCC_PLLSAIM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLSAI division factor for PLLSAIM output by 18 */ -#define LL_RCC_PLLSAIM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLSAI division factor for PLLSAIM output by 19 */ -#define LL_RCC_PLLSAIM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLSAI division factor for PLLSAIM output by 20 */ -#define LL_RCC_PLLSAIM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLSAI division factor for PLLSAIM output by 21 */ -#define LL_RCC_PLLSAIM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLSAI division factor for PLLSAIM output by 22 */ -#define LL_RCC_PLLSAIM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLSAI division factor for PLLSAIM output by 23 */ -#define LL_RCC_PLLSAIM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLSAI division factor for PLLSAIM output by 24 */ -#define LL_RCC_PLLSAIM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLSAI division factor for PLLSAIM output by 25 */ -#define LL_RCC_PLLSAIM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLSAI division factor for PLLSAIM output by 26 */ -#define LL_RCC_PLLSAIM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLSAI division factor for PLLSAIM output by 27 */ -#define LL_RCC_PLLSAIM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLSAI division factor for PLLSAIM output by 28 */ -#define LL_RCC_PLLSAIM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLSAI division factor for PLLSAIM output by 29 */ -#define LL_RCC_PLLSAIM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLSAI division factor for PLLSAIM output by 30 */ -#define LL_RCC_PLLSAIM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLSAI division factor for PLLSAIM output by 31 */ -#define LL_RCC_PLLSAIM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLSAI division factor for PLLSAIM output by 32 */ -#define LL_RCC_PLLSAIM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLSAI division factor for PLLSAIM output by 33 */ -#define LL_RCC_PLLSAIM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLSAI division factor for PLLSAIM output by 34 */ -#define LL_RCC_PLLSAIM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLSAI division factor for PLLSAIM output by 35 */ -#define LL_RCC_PLLSAIM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLSAI division factor for PLLSAIM output by 36 */ -#define LL_RCC_PLLSAIM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLSAI division factor for PLLSAIM output by 37 */ -#define LL_RCC_PLLSAIM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLSAI division factor for PLLSAIM output by 38 */ -#define LL_RCC_PLLSAIM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLSAI division factor for PLLSAIM output by 39 */ -#define LL_RCC_PLLSAIM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLSAI division factor for PLLSAIM output by 40 */ -#define LL_RCC_PLLSAIM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLSAI division factor for PLLSAIM output by 41 */ -#define LL_RCC_PLLSAIM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLSAI division factor for PLLSAIM output by 42 */ -#define LL_RCC_PLLSAIM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLSAI division factor for PLLSAIM output by 43 */ -#define LL_RCC_PLLSAIM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLSAI division factor for PLLSAIM output by 44 */ -#define LL_RCC_PLLSAIM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLSAI division factor for PLLSAIM output by 45 */ -#define LL_RCC_PLLSAIM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLSAI division factor for PLLSAIM output by 46 */ -#define LL_RCC_PLLSAIM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLSAI division factor for PLLSAIM output by 47 */ -#define LL_RCC_PLLSAIM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLSAI division factor for PLLSAIM output by 48 */ -#define LL_RCC_PLLSAIM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLSAI division factor for PLLSAIM output by 49 */ -#define LL_RCC_PLLSAIM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLSAI division factor for PLLSAIM output by 50 */ -#define LL_RCC_PLLSAIM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLSAI division factor for PLLSAIM output by 51 */ -#define LL_RCC_PLLSAIM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLSAI division factor for PLLSAIM output by 52 */ -#define LL_RCC_PLLSAIM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLSAI division factor for PLLSAIM output by 53 */ -#define LL_RCC_PLLSAIM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLSAI division factor for PLLSAIM output by 54 */ -#define LL_RCC_PLLSAIM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLSAI division factor for PLLSAIM output by 55 */ -#define LL_RCC_PLLSAIM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLSAI division factor for PLLSAIM output by 56 */ -#define LL_RCC_PLLSAIM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLSAI division factor for PLLSAIM output by 57 */ -#define LL_RCC_PLLSAIM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLSAI division factor for PLLSAIM output by 58 */ -#define LL_RCC_PLLSAIM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLSAI division factor for PLLSAIM output by 59 */ -#define LL_RCC_PLLSAIM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLSAI division factor for PLLSAIM output by 60 */ -#define LL_RCC_PLLSAIM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLSAI division factor for PLLSAIM output by 61 */ -#define LL_RCC_PLLSAIM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLSAI division factor for PLLSAIM output by 62 */ -#define LL_RCC_PLLSAIM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLSAI division factor for PLLSAIM output by 63 */ -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLSAIQ PLLSAIQ division factor (PLLSAIQ) - * @{ - */ -#define LL_RCC_PLLSAIQ_DIV_2 RCC_PLLSAICFGR_PLLSAIQ_1 /*!< PLLSAI division factor for PLLSAIQ output by 2 */ -#define LL_RCC_PLLSAIQ_DIV_3 (RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 3 */ -#define LL_RCC_PLLSAIQ_DIV_4 RCC_PLLSAICFGR_PLLSAIQ_2 /*!< PLLSAI division factor for PLLSAIQ output by 4 */ -#define LL_RCC_PLLSAIQ_DIV_5 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 5 */ -#define LL_RCC_PLLSAIQ_DIV_6 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 6 */ -#define LL_RCC_PLLSAIQ_DIV_7 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 7 */ -#define LL_RCC_PLLSAIQ_DIV_8 RCC_PLLSAICFGR_PLLSAIQ_3 /*!< PLLSAI division factor for PLLSAIQ output by 8 */ -#define LL_RCC_PLLSAIQ_DIV_9 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 9 */ -#define LL_RCC_PLLSAIQ_DIV_10 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 10 */ -#define LL_RCC_PLLSAIQ_DIV_11 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 11 */ -#define LL_RCC_PLLSAIQ_DIV_12 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2) /*!< PLLSAI division factor for PLLSAIQ output by 12 */ -#define LL_RCC_PLLSAIQ_DIV_13 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 13 */ -#define LL_RCC_PLLSAIQ_DIV_14 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 14 */ -#define LL_RCC_PLLSAIQ_DIV_15 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 15 */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVQ) -/** @defgroup RCC_LL_EC_PLLSAIDIVQ PLLSAIDIVQ division factor (PLLSAIDIVQ) - * @{ - */ -#define LL_RCC_PLLSAIDIVQ_DIV_1 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVQ output by 1 */ -#define LL_RCC_PLLSAIDIVQ_DIV_2 RCC_DCKCFGR_PLLSAIDIVQ_0 /*!< PLLSAI division factor for PLLSAIDIVQ output by 2 */ -#define LL_RCC_PLLSAIDIVQ_DIV_3 RCC_DCKCFGR_PLLSAIDIVQ_1 /*!< PLLSAI division factor for PLLSAIDIVQ output by 3 */ -#define LL_RCC_PLLSAIDIVQ_DIV_4 (RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 4 */ -#define LL_RCC_PLLSAIDIVQ_DIV_5 RCC_DCKCFGR_PLLSAIDIVQ_2 /*!< PLLSAI division factor for PLLSAIDIVQ output by 5 */ -#define LL_RCC_PLLSAIDIVQ_DIV_6 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 6 */ -#define LL_RCC_PLLSAIDIVQ_DIV_7 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 7 */ -#define LL_RCC_PLLSAIDIVQ_DIV_8 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 8 */ -#define LL_RCC_PLLSAIDIVQ_DIV_9 RCC_DCKCFGR_PLLSAIDIVQ_3 /*!< PLLSAI division factor for PLLSAIDIVQ output by 9 */ -#define LL_RCC_PLLSAIDIVQ_DIV_10 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 10 */ -#define LL_RCC_PLLSAIDIVQ_DIV_11 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 11 */ -#define LL_RCC_PLLSAIDIVQ_DIV_12 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 12 */ -#define LL_RCC_PLLSAIDIVQ_DIV_13 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 13 */ -#define LL_RCC_PLLSAIDIVQ_DIV_14 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 14 */ -#define LL_RCC_PLLSAIDIVQ_DIV_15 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 15 */ -#define LL_RCC_PLLSAIDIVQ_DIV_16 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 16 */ -#define LL_RCC_PLLSAIDIVQ_DIV_17 RCC_DCKCFGR_PLLSAIDIVQ_4 /*!< PLLSAI division factor for PLLSAIDIVQ output by 17 */ -#define LL_RCC_PLLSAIDIVQ_DIV_18 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 18 */ -#define LL_RCC_PLLSAIDIVQ_DIV_19 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 19 */ -#define LL_RCC_PLLSAIDIVQ_DIV_20 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 20 */ -#define LL_RCC_PLLSAIDIVQ_DIV_21 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 21 */ -#define LL_RCC_PLLSAIDIVQ_DIV_22 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 22 */ -#define LL_RCC_PLLSAIDIVQ_DIV_23 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 23 */ -#define LL_RCC_PLLSAIDIVQ_DIV_24 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 24 */ -#define LL_RCC_PLLSAIDIVQ_DIV_25 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3) /*!< PLLSAI division factor for PLLSAIDIVQ output by 25 */ -#define LL_RCC_PLLSAIDIVQ_DIV_26 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 26 */ -#define LL_RCC_PLLSAIDIVQ_DIV_27 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 27 */ -#define LL_RCC_PLLSAIDIVQ_DIV_28 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 28 */ -#define LL_RCC_PLLSAIDIVQ_DIV_29 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 29 */ -#define LL_RCC_PLLSAIDIVQ_DIV_30 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 30 */ -#define LL_RCC_PLLSAIDIVQ_DIV_31 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 31 */ -#define LL_RCC_PLLSAIDIVQ_DIV_32 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 32 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLSAIDIVQ */ - -#if defined(RCC_PLLSAICFGR_PLLSAIR) -/** @defgroup RCC_LL_EC_PLLSAIR PLLSAIR division factor (PLLSAIR) - * @{ - */ -#define LL_RCC_PLLSAIR_DIV_2 RCC_PLLSAICFGR_PLLSAIR_1 /*!< PLLSAI division factor for PLLSAIR output by 2 */ -#define LL_RCC_PLLSAIR_DIV_3 (RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 3 */ -#define LL_RCC_PLLSAIR_DIV_4 RCC_PLLSAICFGR_PLLSAIR_2 /*!< PLLSAI division factor for PLLSAIR output by 4 */ -#define LL_RCC_PLLSAIR_DIV_5 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 5 */ -#define LL_RCC_PLLSAIR_DIV_6 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1) /*!< PLLSAI division factor for PLLSAIR output by 6 */ -#define LL_RCC_PLLSAIR_DIV_7 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 7 */ -/** - * @} - */ -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -/** @defgroup RCC_LL_EC_PLLSAIDIVR PLLSAIDIVR division factor (PLLSAIDIVR) - * @{ - */ -#define LL_RCC_PLLSAIDIVR_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVR output by 2 */ -#define LL_RCC_PLLSAIDIVR_DIV_4 RCC_DCKCFGR_PLLSAIDIVR_0 /*!< PLLSAI division factor for PLLSAIDIVR output by 4 */ -#define LL_RCC_PLLSAIDIVR_DIV_8 RCC_DCKCFGR_PLLSAIDIVR_1 /*!< PLLSAI division factor for PLLSAIDIVR output by 8 */ -#define LL_RCC_PLLSAIDIVR_DIV_16 (RCC_DCKCFGR_PLLSAIDIVR_1 | RCC_DCKCFGR_PLLSAIDIVR_0) /*!< PLLSAI division factor for PLLSAIDIVR output by 16 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** @defgroup RCC_LL_EC_PLLSAIP PLLSAIP division factor (PLLSAIP) - * @{ - */ -#define LL_RCC_PLLSAIP_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIP output by 2 */ -#define LL_RCC_PLLSAIP_DIV_4 RCC_PLLSAICFGR_PLLSAIP_0 /*!< PLLSAI division factor for PLLSAIP output by 4 */ -#define LL_RCC_PLLSAIP_DIV_6 RCC_PLLSAICFGR_PLLSAIP_1 /*!< PLLSAI division factor for PLLSAIP output by 6 */ -#define LL_RCC_PLLSAIP_DIV_8 (RCC_PLLSAICFGR_PLLSAIP_1 | RCC_PLLSAICFGR_PLLSAIP_0) /*!< PLLSAI division factor for PLLSAIP output by 8 */ -/** - * @} - */ -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RCC register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RCC register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) -/** - * @} - */ - -/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies - * @{ - */ - -/** - * @brief Helper macro to calculate the PLLCLK frequency on system domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos ) + 1U) * 2U)) - -#if defined(RCC_PLLR_SYSCLK_SUPPORT) -/** - * @brief Helper macro to calculate the PLLRCLK frequency on system domain - * @note ex: @ref __LL_RCC_CALC_PLLRCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLRCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) - -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ - -/** - * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos )) - -#if defined(DSI) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on DSI - * @note ex: @ref __LL_RCC_CALC_PLLCLK_DSI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_DSI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* DSI */ - -#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on I2S - * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ - -#if defined(SPDIFRX) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on SPDIFRX - * @note ex: @ref __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on SAI - * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR (), @ref LL_RCC_PLL_GetDIVR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @param __PLLDIVR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval PLL clock frequency (in Hz) - */ -#if defined(RCC_DCKCFGR_PLLDIVR) -#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__, __PLLDIVR__) (((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) / ((__PLLDIVR__) >> RCC_DCKCFGR_PLLDIVR_Pos )) -#else -#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* RCC_DCKCFGR_PLLDIVR */ -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Helper macro to calculate the PLLSAI frequency used for SAI domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetQ (), @ref LL_RCC_PLLSAI_GetDIVQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLSAIQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - * @param __PLLSAIDIVQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIQ__, __PLLSAIDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - (((__PLLSAIQ__) >> RCC_PLLSAICFGR_PLLSAIQ_Pos) * (((__PLLSAIDIVQ__) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos) + 1U))) - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Helper macro to calculate the PLLSAI frequency used on 48Mhz domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 50 and 432 - * @param __PLLSAIP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - ((((__PLLSAIP__) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) * 2U)) -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Helper macro to calculate the PLLSAI frequency used for LTDC domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetR (), @ref LL_RCC_PLLSAI_GetDIVR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLSAIR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - * @param __PLLSAIDIVR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_LTDC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIR__, __PLLSAIDIVR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - (((__PLLSAIR__) >> RCC_PLLSAICFGR_PLLSAIR_Pos) * (aRCC_PLLSAIDIVRPrescTable[(__PLLSAIDIVR__) >> RCC_DCKCFGR_PLLSAIDIVR_Pos]))) -#endif /* LTDC */ -#endif /* RCC_PLLSAI_SUPPORT */ - -#if defined(RCC_PLLI2S_SUPPORT) -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR) -/** - * @brief Helper macro to calculate the PLLI2S frequency used for SAI domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ (), @ref LL_RCC_PLLI2S_GetDIVQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLI2SQ_R__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @param __PLLI2SDIVQ_R__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval PLLI2S clock frequency (in Hz) - */ -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos) * (((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos) + 1U))) -#else -#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos) * ((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVR_Pos))) - -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_DCKCFGR_PLLI2SDIVQ || RCC_DCKCFGR_PLLI2SDIVR */ - -#if defined(SPDIFRX) -/** - * @brief Helper macro to calculate the PLLI2S frequency used on SPDIFRX domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50 and 432 - * @param __PLLI2SP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((((__PLLI2SP__) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) * 2U)) - -#endif /* SPDIFRX */ - -/** - * @brief Helper macro to calculate the PLLI2S frequency used for I2S domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLI2SR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((__PLLI2SR__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos)) - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Helper macro to calculate the PLLI2S frequency used for 48Mhz domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50 and 432 - * @param __PLLI2SQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((__PLLI2SQ__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos)) - -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_PLLI2S_SUPPORT */ - -/** - * @brief Helper macro to calculate the HCLK frequency - * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) - * @param __AHBPRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval HCLK clock frequency (in Hz) - */ -#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) - -/** - * @brief Helper macro to calculate the PCLK1 frequency (ABP1) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB1PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval PCLK1 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos]) - -/** - * @brief Helper macro to calculate the PCLK2 frequency (ABP2) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB2PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - * @retval PCLK2 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos]) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_LL_EF_HSE HSE - * @{ - */ - -/** - * @brief Enable the Clock Security System. - * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) -{ - SET_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Enable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Disable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Enable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Disable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Check if HSE oscillator Ready - * @rmtoll CR HSERDY LL_RCC_HSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_HSI HSI - * @{ - */ - -/** - * @brief Enable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Disable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Check if HSI clock is ready - * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); -} - -/** - * @brief Get HSI Calibration value - * @note When HSITRIM is written, HSICAL is updated with the sum of - * HSITRIM and the factory trim value - * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration - * @retval Between Min_Data = 0x00 and Max_Data = 0xFF - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); -} - -/** - * @brief Set HSI Calibration trimming - * @note user-programmable trimming value that is added to the HSICAL - * @note Default value is 16, which, when added to the HSICAL value, - * should trim the HSI to 16 MHz +/- 1 % - * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming - * @param Value Between Min_Data = 0 and Max_Data = 31 - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) -{ - MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); -} - -/** - * @brief Get HSI Calibration trimming - * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming - * @retval Between Min_Data = 0 and Max_Data = 31 - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSE LSE - * @{ - */ - -/** - * @brief Enable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Enable(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Disable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Disable(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Enable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Disable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Check if LSE oscillator Ready - * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); -} - -#if defined(RCC_BDCR_LSEMOD) -/** - * @brief Enable LSE high drive mode. - * @note LSE high drive mode can be enabled only when the LSE clock is disabled - * @rmtoll BDCR LSEMOD LL_RCC_LSE_EnableHighDriveMode - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableHighDriveMode(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); -} - -/** - * @brief Disable LSE high drive mode. - * @note LSE high drive mode can be disabled only when the LSE clock is disabled - * @rmtoll BDCR LSEMOD LL_RCC_LSE_DisableHighDriveMode - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableHighDriveMode(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); -} -#endif /* RCC_BDCR_LSEMOD */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSI LSI - * @{ - */ - -/** - * @brief Enable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Enable(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Disable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Disable(void) -{ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Check if LSI is Ready - * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_System System - * @{ - */ - -/** - * @brief Configure the system clock source - * @rmtoll CFGR SW LL_RCC_SetSysClkSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLLR (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); -} - -/** - * @brief Get the system clock source - * @rmtoll CFGR SWS LL_RCC_GetSysClkSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLLR (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); -} - -/** - * @brief Set AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); -} - -/** - * @brief Set APB1 prescaler - * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); -} - -/** - * @brief Set APB2 prescaler - * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); -} - -/** - * @brief Get AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); -} - -/** - * @brief Get APB1 prescaler - * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); -} - -/** - * @brief Get APB2 prescaler - * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_MCO MCO - * @{ - */ - -#if defined(RCC_CFGR_MCO1EN) -/** - * @brief Enable MCO1 output - * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO1_Enable(void) -{ - SET_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); -} - -/** - * @brief Disable MCO1 output - * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO1_Disable(void) -{ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); -} -#endif /* RCC_CFGR_MCO1EN */ - -#if defined(RCC_CFGR_MCO2EN) -/** - * @brief Enable MCO2 output - * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO2_Enable(void) -{ - SET_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); -} - -/** - * @brief Disable MCO2 output - * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO2_Disable(void) -{ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); -} -#endif /* RCC_CFGR_MCO2EN */ - -/** - * @brief Configure MCOx - * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n - * CFGR MCO1PRE LL_RCC_ConfigMCO\n - * CFGR MCO2 LL_RCC_ConfigMCO\n - * CFGR MCO2PRE LL_RCC_ConfigMCO - * @param MCOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1SOURCE_HSI - * @arg @ref LL_RCC_MCO1SOURCE_LSE - * @arg @ref LL_RCC_MCO1SOURCE_HSE - * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK - * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK - * @arg @ref LL_RCC_MCO2SOURCE_PLLI2S - * @arg @ref LL_RCC_MCO2SOURCE_HSE - * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK - * @param MCOxPrescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1_DIV_1 - * @arg @ref LL_RCC_MCO1_DIV_2 - * @arg @ref LL_RCC_MCO1_DIV_3 - * @arg @ref LL_RCC_MCO1_DIV_4 - * @arg @ref LL_RCC_MCO1_DIV_5 - * @arg @ref LL_RCC_MCO2_DIV_1 - * @arg @ref LL_RCC_MCO2_DIV_2 - * @arg @ref LL_RCC_MCO2_DIV_3 - * @arg @ref LL_RCC_MCO2_DIV_4 - * @arg @ref LL_RCC_MCO2_DIV_5 - * @retval None - */ -__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) -{ - MODIFY_REG(RCC->CFGR, (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U), (MCOxSource << 16U) | (MCOxPrescaler << 16U)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source - * @{ - */ -#if defined(FMPI2C1) -/** - * @brief Configure FMPI2C clock source - * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_SetFMPI2CClockSource - * @param FMPI2CxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetFMPI2CClockSource(uint32_t FMPI2CxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, FMPI2CxSource); -} -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** - * @brief Configure LPTIMx clock source - * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource - * @param LPTIMxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, LPTIMxSource); -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Configure SAIx clock source - * @rmtoll DCKCFGR SAI1SRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI2SRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI1ASRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI1BSRC LL_RCC_SetSAIClockSource - * @param SAIxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource) -{ - MODIFY_REG(RCC->DCKCFGR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U)); -} -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** - * @brief Configure SDIO clock source - * @rmtoll DCKCFGR SDIOSEL LL_RCC_SetSDIOClockSource\n - * DCKCFGR2 SDIOSEL LL_RCC_SetSDIOClockSource - * @param SDIOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK - * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSDIOClockSource(uint32_t SDIOxSource) -{ -#if defined(RCC_DCKCFGR_SDIOSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, SDIOxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, SDIOxSource); -#endif /* RCC_DCKCFGR_SDIOSEL */ -} -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** - * @brief Configure 48Mhz domain clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetCK48MClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetCK48MClockSource - * @param CK48MxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCK48MClockSource(uint32_t CK48MxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, CK48MxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, CK48MxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} - -#if defined(RNG) -/** - * @brief Configure RNG clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetRNGClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetRNGClockSource - * @param RNGxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, RNGxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, RNGxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Configure USB clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetUSBClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetUSBClockSource - * @param USBxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, USBxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, USBxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* USB_OTG_FS || USB_OTG_HS */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(CEC) -/** - * @brief Configure CEC clock source - * @rmtoll DCKCFGR2 CECSEL LL_RCC_SetCECClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, Source); -} -#endif /* CEC */ - -/** - * @brief Configure I2S clock source - * @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2SSRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2S1SRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2S2SRC LL_RCC_SetI2SClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t Source) -{ -#if defined(RCC_CFGR_I2SSRC) - MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, Source); -#else - MODIFY_REG(RCC->DCKCFGR, (Source & 0xFFFF0000U), (Source << 16U)); -#endif /* RCC_CFGR_I2SSRC */ -} - -#if defined(DSI) -/** - * @brief Configure DSI clock source - * @rmtoll DCKCFGR DSISEL LL_RCC_SetDSIClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY - * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, Source); -} -#endif /* DSI */ - -#if defined(DFSDM1_Channel0) -/** - * @brief Configure DFSDM Audio clock source - * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_SetDFSDMAudioClockSource\n - * DCKCFGR CKDFSDM2ASEL LL_RCC_SetDFSDMAudioClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, (Source & 0x0000FFFFU), (Source >> 16U)); -} - -/** - * @brief Configure DFSDM Kernel clock source - * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_SetDFSDMClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, Source); -} -#endif /* DFSDM1_Channel0 */ - -#if defined(SPDIFRX) -/** - * @brief Configure SPDIFRX clock source - * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_SetSPDIFRXClockSource - * @param SPDIFRXxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSPDIFRXClockSource(uint32_t SPDIFRXxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, SPDIFRXxSource); -} -#endif /* SPDIFRX */ - -#if defined(FMPI2C1) -/** - * @brief Get FMPI2C clock source - * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_GetFMPI2CClockSource - * @param FMPI2Cx This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI - */ -__STATIC_INLINE uint32_t LL_RCC_GetFMPI2CClockSource(uint32_t FMPI2Cx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, FMPI2Cx)); -} -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** - * @brief Get LPTIMx clock source - * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource - * @param LPTIMx This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)); -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Get SAIx clock source - * @rmtoll DCKCFGR SAI1SEL LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI2SEL LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI1ASRC LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI1BSRC LL_RCC_GetSAIClockSource - * @param SAIx This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, SAIx) >> 16U | SAIx); -} -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** - * @brief Get SDIOx clock source - * @rmtoll DCKCFGR SDIOSEL LL_RCC_GetSDIOClockSource\n - * DCKCFGR2 SDIOSEL LL_RCC_GetSDIOClockSource - * @param SDIOx This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK - * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK - */ -__STATIC_INLINE uint32_t LL_RCC_GetSDIOClockSource(uint32_t SDIOx) -{ -#if defined(RCC_DCKCFGR_SDIOSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, SDIOx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SDIOx)); -#endif /* RCC_DCKCFGR_SDIOSEL */ -} -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** - * @brief Get 48Mhz domain clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetCK48MClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetCK48MClockSource - * @param CK48Mx This parameter can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetCK48MClockSource(uint32_t CK48Mx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, CK48Mx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CK48Mx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} - -#if defined(RNG) -/** - * @brief Get RNGx clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetRNGClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetRNGClockSource - * @param RNGx This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RNGx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RNGx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Get USBx clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetUSBClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetUSBClockSource - * @param USBx This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, USBx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USBx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* USB_OTG_FS || USB_OTG_HS */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(CEC) -/** - * @brief Get CEC Clock Source - * @rmtoll DCKCFGR2 CECSEL LL_RCC_GetCECClockSource - * @param CECx This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CECx)); -} -#endif /* CEC */ - -/** - * @brief Get I2S Clock Source - * @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2SSRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2S1SRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2S2SRC LL_RCC_GetI2SClockSource - * @param I2Sx This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE - * @arg @ref LL_RCC_I2S2_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) -{ -#if defined(RCC_CFGR_I2SSRC) - return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR, I2Sx) >> 16U | I2Sx); -#endif /* RCC_CFGR_I2SSRC */ -} - -#if defined(DFSDM1_Channel0) -/** - * @brief Get DFSDM Audio Clock Source - * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_GetDFSDMAudioClockSource\n - * DCKCFGR CKDFSDM2ASEL LL_RCC_GetDFSDMAudioClockSource - * @param DFSDMx This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx) << 16U | DFSDMx); -} - -/** - * @brief Get DFSDM Audio Clock Source - * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_GetDFSDMClockSource - * @param DFSDMx This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx)); -} -#endif /* DFSDM1_Channel0 */ - -#if defined(SPDIFRX) -/** - * @brief Get SPDIFRX clock source - * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_GetSPDIFRXClockSource - * @param SPDIFRXx This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSPDIFRXClockSource(uint32_t SPDIFRXx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SPDIFRXx)); -} -#endif /* SPDIFRX */ - -#if defined(DSI) -/** - * @brief Get DSI Clock Source - * @rmtoll DCKCFGR DSISEL LL_RCC_GetDSIClockSource - * @param DSIx This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY - * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL - */ -__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DSIx)); -} -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_RTC RTC - * @{ - */ - -/** - * @brief Set RTC Clock Source - * @note Once the RTC clock source has been selected, it cannot be changed anymore unless - * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is - * set). The BDRST bit can be used to reset them. - * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); -} - -/** - * @brief Get RTC Clock Source - * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) -{ - return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); -} - -/** - * @brief Enable RTC - * @rmtoll BDCR RTCEN LL_RCC_EnableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableRTC(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Disable RTC - * @rmtoll BDCR RTCEN LL_RCC_DisableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableRTC(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Check if RTC has been enabled or not - * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); -} - -/** - * @brief Force the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Release the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Set HSE Prescalers for RTC Clock - * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_NOCLOCK - * @arg @ref LL_RCC_RTC_HSE_DIV_2 - * @arg @ref LL_RCC_RTC_HSE_DIV_3 - * @arg @ref LL_RCC_RTC_HSE_DIV_4 - * @arg @ref LL_RCC_RTC_HSE_DIV_5 - * @arg @ref LL_RCC_RTC_HSE_DIV_6 - * @arg @ref LL_RCC_RTC_HSE_DIV_7 - * @arg @ref LL_RCC_RTC_HSE_DIV_8 - * @arg @ref LL_RCC_RTC_HSE_DIV_9 - * @arg @ref LL_RCC_RTC_HSE_DIV_10 - * @arg @ref LL_RCC_RTC_HSE_DIV_11 - * @arg @ref LL_RCC_RTC_HSE_DIV_12 - * @arg @ref LL_RCC_RTC_HSE_DIV_13 - * @arg @ref LL_RCC_RTC_HSE_DIV_14 - * @arg @ref LL_RCC_RTC_HSE_DIV_15 - * @arg @ref LL_RCC_RTC_HSE_DIV_16 - * @arg @ref LL_RCC_RTC_HSE_DIV_17 - * @arg @ref LL_RCC_RTC_HSE_DIV_18 - * @arg @ref LL_RCC_RTC_HSE_DIV_19 - * @arg @ref LL_RCC_RTC_HSE_DIV_20 - * @arg @ref LL_RCC_RTC_HSE_DIV_21 - * @arg @ref LL_RCC_RTC_HSE_DIV_22 - * @arg @ref LL_RCC_RTC_HSE_DIV_23 - * @arg @ref LL_RCC_RTC_HSE_DIV_24 - * @arg @ref LL_RCC_RTC_HSE_DIV_25 - * @arg @ref LL_RCC_RTC_HSE_DIV_26 - * @arg @ref LL_RCC_RTC_HSE_DIV_27 - * @arg @ref LL_RCC_RTC_HSE_DIV_28 - * @arg @ref LL_RCC_RTC_HSE_DIV_29 - * @arg @ref LL_RCC_RTC_HSE_DIV_30 - * @arg @ref LL_RCC_RTC_HSE_DIV_31 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); -} - -/** - * @brief Get HSE Prescalers for RTC Clock - * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_NOCLOCK - * @arg @ref LL_RCC_RTC_HSE_DIV_2 - * @arg @ref LL_RCC_RTC_HSE_DIV_3 - * @arg @ref LL_RCC_RTC_HSE_DIV_4 - * @arg @ref LL_RCC_RTC_HSE_DIV_5 - * @arg @ref LL_RCC_RTC_HSE_DIV_6 - * @arg @ref LL_RCC_RTC_HSE_DIV_7 - * @arg @ref LL_RCC_RTC_HSE_DIV_8 - * @arg @ref LL_RCC_RTC_HSE_DIV_9 - * @arg @ref LL_RCC_RTC_HSE_DIV_10 - * @arg @ref LL_RCC_RTC_HSE_DIV_11 - * @arg @ref LL_RCC_RTC_HSE_DIV_12 - * @arg @ref LL_RCC_RTC_HSE_DIV_13 - * @arg @ref LL_RCC_RTC_HSE_DIV_14 - * @arg @ref LL_RCC_RTC_HSE_DIV_15 - * @arg @ref LL_RCC_RTC_HSE_DIV_16 - * @arg @ref LL_RCC_RTC_HSE_DIV_17 - * @arg @ref LL_RCC_RTC_HSE_DIV_18 - * @arg @ref LL_RCC_RTC_HSE_DIV_19 - * @arg @ref LL_RCC_RTC_HSE_DIV_20 - * @arg @ref LL_RCC_RTC_HSE_DIV_21 - * @arg @ref LL_RCC_RTC_HSE_DIV_22 - * @arg @ref LL_RCC_RTC_HSE_DIV_23 - * @arg @ref LL_RCC_RTC_HSE_DIV_24 - * @arg @ref LL_RCC_RTC_HSE_DIV_25 - * @arg @ref LL_RCC_RTC_HSE_DIV_26 - * @arg @ref LL_RCC_RTC_HSE_DIV_27 - * @arg @ref LL_RCC_RTC_HSE_DIV_28 - * @arg @ref LL_RCC_RTC_HSE_DIV_29 - * @arg @ref LL_RCC_RTC_HSE_DIV_30 - * @arg @ref LL_RCC_RTC_HSE_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); -} - -/** - * @} - */ - -#if defined(RCC_DCKCFGR_TIMPRE) -/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM - * @{ - */ - -/** - * @brief Set Timers Clock Prescalers - * @rmtoll DCKCFGR TIMPRE LL_RCC_SetTIMPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_TIM_PRESCALER_TWICE - * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE, Prescaler); -} - -/** - * @brief Get Timers Clock Prescalers - * @rmtoll DCKCFGR TIMPRE LL_RCC_GetTIMPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_TIM_PRESCALER_TWICE - * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES - */ -__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE)); -} - -/** - * @} - */ -#endif /* RCC_DCKCFGR_TIMPRE */ - -/** @defgroup RCC_LL_EF_PLL PLL - * @{ - */ - -/** - * @brief Enable PLL - * @rmtoll CR PLLON LL_RCC_PLL_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Disable PLL - * @note Cannot be disabled if the PLL clock is used as the system clock - * @rmtoll CR PLLON LL_RCC_PLL_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Check if PLL Ready - * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); -} - -/** - * @brief Configure PLL used for SYSCLK Domain - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLL is disabled - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SYS - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLP_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @arg @ref LL_RCC_PLLR_DIV_2 (*) - * @arg @ref LL_RCC_PLLR_DIV_3 (*) - * @arg @ref LL_RCC_PLLR_DIV_4 (*) - * @arg @ref LL_RCC_PLLR_DIV_5 (*) - * @arg @ref LL_RCC_PLLR_DIV_6 (*) - * @arg @ref LL_RCC_PLLR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP_R) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos); - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLP, PLLP_R); -#if defined(RCC_PLLR_SYSCLK_SUPPORT) - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLR, PLLP_R); -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ -} - -/** - * @brief Configure PLL used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLL is disabled - * @note This can be selected for USB, RNG, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ); -} - -#if defined(DSI) -/** - * @brief Configure PLL used for DSI clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for DSI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_DSI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* DSI */ - -#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) -/** - * @brief Configure PLL used for I2S clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for I2S - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_I2S - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ - -#if defined(SPDIFRX) -/** - * @brief Configure PLL used for SPDIFRX clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for SPDIFRX - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SPDIFRX - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Configure PLL used for SAI clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SAI\n - * DCKCFGR PLLDIVR LL_RCC_PLL_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @param PLLDIVR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -#if defined(RCC_DCKCFGR_PLLDIVR) -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) -#else -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -#endif /* RCC_DCKCFGR_PLLDIVR */ -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -#if defined(RCC_DCKCFGR_PLLDIVR) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, PLLDIVR); -#endif /* RCC_DCKCFGR_PLLDIVR */ -} -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -/** - * @brief Configure PLL clock source - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource - * @param PLLSource This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -} - -/** - * @brief Get Main PLL multiplication factor for VCO - * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN - * @retval Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); -} - -/** - * @brief Get Main PLL division factor for PLLP - * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); -} - -/** - * @brief Get Main PLL division factor for PLLQ - * @note used for PLL48MCLK selected for USB, RNG, SDIO (48 MHz clock) - * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); -} - -#if defined(RCC_PLLCFGR_PLLR) -/** - * @brief Get Main PLL division factor for PLLR - * @note used for PLLCLK (system clock) - * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); -} -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_DCKCFGR_PLLDIVR) -/** - * @brief Get Main PLL division factor for PLLDIVR - * @note used for PLLSAICLK (SAI1 and SAI2 clock) - * @rmtoll DCKCFGR PLLDIVR LL_RCC_PLL_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 - * @arg @ref LL_RCC_PLLDIVR_DIV_2 - * @arg @ref LL_RCC_PLLDIVR_DIV_3 - * @arg @ref LL_RCC_PLLDIVR_DIV_4 - * @arg @ref LL_RCC_PLLDIVR_DIV_5 - * @arg @ref LL_RCC_PLLDIVR_DIV_6 - * @arg @ref LL_RCC_PLLDIVR_DIV_7 - * @arg @ref LL_RCC_PLLDIVR_DIV_8 - * @arg @ref LL_RCC_PLLDIVR_DIV_9 - * @arg @ref LL_RCC_PLLDIVR_DIV_10 - * @arg @ref LL_RCC_PLLDIVR_DIV_11 - * @arg @ref LL_RCC_PLLDIVR_DIV_12 - * @arg @ref LL_RCC_PLLDIVR_DIV_13 - * @arg @ref LL_RCC_PLLDIVR_DIV_14 - * @arg @ref LL_RCC_PLLDIVR_DIV_15 - * @arg @ref LL_RCC_PLLDIVR_DIV_16 - * @arg @ref LL_RCC_PLLDIVR_DIV_17 - * @arg @ref LL_RCC_PLLDIVR_DIV_18 - * @arg @ref LL_RCC_PLLDIVR_DIV_19 - * @arg @ref LL_RCC_PLLDIVR_DIV_20 - * @arg @ref LL_RCC_PLLDIVR_DIV_21 - * @arg @ref LL_RCC_PLLDIVR_DIV_22 - * @arg @ref LL_RCC_PLLDIVR_DIV_23 - * @arg @ref LL_RCC_PLLDIVR_DIV_24 - * @arg @ref LL_RCC_PLLDIVR_DIV_25 - * @arg @ref LL_RCC_PLLDIVR_DIV_26 - * @arg @ref LL_RCC_PLLDIVR_DIV_27 - * @arg @ref LL_RCC_PLLDIVR_DIV_28 - * @arg @ref LL_RCC_PLLDIVR_DIV_29 - * @arg @ref LL_RCC_PLLDIVR_DIV_30 - * @arg @ref LL_RCC_PLLDIVR_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR)); -} -#endif /* RCC_DCKCFGR_PLLDIVR */ - -/** - * @brief Get Division factor for the main PLL and other PLL - * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -} - -/** - * @brief Configure Spread Spectrum used for PLL - * @note These bits must be written before enabling PLL - * @rmtoll SSCGR MODPER LL_RCC_PLL_ConfigSpreadSpectrum\n - * SSCGR INCSTEP LL_RCC_PLL_ConfigSpreadSpectrum\n - * SSCGR SPREADSEL LL_RCC_PLL_ConfigSpreadSpectrum - * @param Mod Between Min_Data=0 and Max_Data=8191 - * @param Inc Between Min_Data=0 and Max_Data=32767 - * @param Sel This parameter can be one of the following values: - * @arg @ref LL_RCC_SPREAD_SELECT_CENTER - * @arg @ref LL_RCC_SPREAD_SELECT_DOWN - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigSpreadSpectrum(uint32_t Mod, uint32_t Inc, uint32_t Sel) -{ - MODIFY_REG(RCC->SSCGR, RCC_SSCGR_MODPER | RCC_SSCGR_INCSTEP | RCC_SSCGR_SPREADSEL, Mod | (Inc << RCC_SSCGR_INCSTEP_Pos) | Sel); -} - -/** - * @brief Get Spread Spectrum Modulation Period for PLL - * @rmtoll SSCGR MODPER LL_RCC_PLL_GetPeriodModulation - * @retval Between Min_Data=0 and Max_Data=8191 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetPeriodModulation(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_MODPER)); -} - -/** - * @brief Get Spread Spectrum Incrementation Step for PLL - * @note Must be written before enabling PLL - * @rmtoll SSCGR INCSTEP LL_RCC_PLL_GetStepIncrementation - * @retval Between Min_Data=0 and Max_Data=32767 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetStepIncrementation(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_INCSTEP) >> RCC_SSCGR_INCSTEP_Pos); -} - -/** - * @brief Get Spread Spectrum Selection for PLL - * @note Must be written before enabling PLL - * @rmtoll SSCGR SPREADSEL LL_RCC_PLL_GetSpreadSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SPREAD_SELECT_CENTER - * @arg @ref LL_RCC_SPREAD_SELECT_DOWN - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetSpreadSelection(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_SPREADSEL)); -} - -/** - * @brief Enable Spread Spectrum for PLL. - * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Enable(void) -{ - SET_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); -} - -/** - * @brief Disable Spread Spectrum for PLL. - * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Disable(void) -{ - CLEAR_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); -} - -/** - * @} - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** @defgroup RCC_LL_EF_PLLI2S PLLI2S - * @{ - */ - -/** - * @brief Enable PLLI2S - * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLI2SON); -} - -/** - * @brief Disable PLLI2S - * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); -} - -/** - * @brief Check if PLLI2S Ready - * @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) == (RCC_CR_PLLI2SRDY)); -} - -#if (defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR)) -/** - * @brief Configure PLLI2S used for SAI domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ/PLLR can be written only when PLLI2S is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_SAI\n - * DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_ConfigDomain_SAI\n - * DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @param PLLDIVQ_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ_R, uint32_t PLLDIVQ_R) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos); -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ, PLLQ_R); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, PLLDIVQ_R); -#else - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR, PLLQ_R); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, PLLDIVQ_R); -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ -} -#endif /* RCC_DCKCFGR_PLLI2SDIVQ && RCC_DCKCFGR_PLLI2SDIVR */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Configure PLLI2S used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLLI2S is disabled - * @note This can be selected for RNG, USB, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SQ, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLQ); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(SPDIFRX) -/** - * @brief Configure PLLI2S used for SPDIFRX domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLLI2S is disabled - * @note This can be selected for SPDIFRX - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_ConfigDomain_SPDIFRX - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLP This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SP, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLP); -} -#endif /* SPDIFRX */ - -/** - * @brief Configure PLLI2S used for I2S1 domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLR can be written only when PLLI2S is disabled - * @note This can be selected for I2S - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_I2S - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SR, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLR); -} - -/** - * @brief Get I2SPLL multiplication factor for VCO - * @rmtoll PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_GetN - * @retval Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) -/** - * @brief Get I2SPLL division factor for PLLI2SQ - * @rmtoll PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ)); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - -/** - * @brief Get I2SPLL division factor for PLLI2SR - * @note used for PLLI2SCLK (I2S clock) - * @rmtoll PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR)); -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SP) -/** - * @brief Get I2SPLL division factor for PLLI2SP - * @note used for PLLSPDIFRXCLK (SPDIFRX clock) - * @rmtoll PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SP)); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Get I2SPLL division factor for PLLI2SDIVQ - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_GetDIVQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVQ(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ)); -} -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVR) -/** - * @brief Get I2SPLL division factor for PLLI2SDIVR - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR)); -} -#endif /* RCC_DCKCFGR_PLLI2SDIVR */ - -/** - * @brief Get division factor for PLLI2S input clock - * @rmtoll PLLCFGR PLLM LL_RCC_PLLI2S_GetDivider\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDivider(void) -{ -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM)); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_GetMainSource\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetMainSource(void) -{ -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - uint32_t pllsrc = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - uint32_t plli2sssrc0 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC); - uint32_t plli2sssrc1 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC) >> 15U; - return (uint32_t)(pllsrc | plli2sssrc0 | plli2sssrc1); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ -} - -/** - * @} - */ -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** @defgroup RCC_LL_EF_PLLSAI PLLSAI - * @{ - */ - -/** - * @brief Enable PLLSAI - * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLSAION); -} - -/** - * @brief Disable PLLSAI - * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); -} - -/** - * @brief Check if PLLSAI Ready - * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) == (RCC_CR_PLLSAIRDY)); -} - -/** - * @brief Configure PLLSAI used for SAI domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLLSAI is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_ConfigDomain_SAI\n - * DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - * @param PLLDIVQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIQ, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLQ); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, PLLDIVQ); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Configure PLLSAI used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLLSAI is disabled - * @note This can be selected for USB, RNG, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLP This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIP, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLP); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Configure PLLSAI used for LTDC domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLR can be written only when PLLSAI is disabled - * @note This can be selected for LTDC - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_ConfigDomain_LTDC - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - * @param PLLDIVR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIR, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLR); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, PLLDIVR); -} -#endif /* LTDC */ - -/** - * @brief Get division factor for PLLSAI input clock - * @rmtoll PLLCFGR PLLM LL_RCC_PLLSAI_GetDivider\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDivider(void) -{ -#if defined(RCC_PLLSAICFGR_PLLSAIM) - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM)); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -} - -/** - * @brief Get SAIPLL multiplication factor for VCO - * @rmtoll PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_GetN - * @retval Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); -} - -/** - * @brief Get SAIPLL division factor for PLLSAIQ - * @rmtoll PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIQ)); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIR) -/** - * @brief Get SAIPLL division factor for PLLSAIR - * @note used for PLLSAICLK (SAI clock) - * @rmtoll PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIR)); -} -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Get SAIPLL division factor for PLLSAIP - * @note used for PLL48MCLK (48M domain clock) - * @rmtoll PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIP)); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -/** - * @brief Get SAIPLL division factor for PLLSAIDIVQ - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_GetDIVQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVQ(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ)); -} - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -/** - * @brief Get SAIPLL division factor for PLLSAIDIVR - * @note used for LTDC domain clock - * @rmtoll DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR)); -} -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -/** - * @} - */ -#endif /* RCC_PLLSAI_SUPPORT */ - -/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Clear LSI ready interrupt flag - * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); -} - -/** - * @brief Clear LSE ready interrupt flag - * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); -} - -/** - * @brief Clear HSI ready interrupt flag - * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); -} - -/** - * @brief Clear HSE ready interrupt flag - * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); -} - -/** - * @brief Clear PLL ready interrupt flag - * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Clear PLLI2S ready interrupt flag - * @rmtoll CIR PLLI2SRDYC LL_RCC_ClearFlag_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Clear PLLSAI ready interrupt flag - * @rmtoll CIR PLLSAIRDYC LL_RCC_ClearFlag_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -} - -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Clear Clock security system interrupt flag - * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_CSSC); -} - -/** - * @brief Check if LSI ready interrupt occurred or not - * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); -} - -/** - * @brief Check if LSE ready interrupt occurred or not - * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); -} - -/** - * @brief Check if HSI ready interrupt occurred or not - * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); -} - -/** - * @brief Check if HSE ready interrupt occurred or not - * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); -} - -/** - * @brief Check if PLL ready interrupt occurred or not - * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Check if PLLI2S ready interrupt occurred or not - * @rmtoll CIR PLLI2SRDYF LL_RCC_IsActiveFlag_PLLI2SRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYF) == (RCC_CIR_PLLI2SRDYF)); -} -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Check if PLLSAI ready interrupt occurred or not - * @rmtoll CIR PLLSAIRDYF LL_RCC_IsActiveFlag_PLLSAIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYF) == (RCC_CIR_PLLSAIRDYF)); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Check if Clock security system interrupt occurred or not - * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); -} - -/** - * @brief Check if RCC flag Independent Watchdog reset is set or not. - * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); -} - -/** - * @brief Check if RCC flag Low Power reset is set or not. - * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); -} - -/** - * @brief Check if RCC flag Pin reset is set or not. - * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); -} - -/** - * @brief Check if RCC flag POR/PDR reset is set or not. - * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); -} - -/** - * @brief Check if RCC flag Software reset is set or not. - * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); -} - -/** - * @brief Check if RCC flag Window Watchdog reset is set or not. - * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); -} - -#if defined(RCC_CSR_BORRSTF) -/** - * @brief Check if RCC flag BOR reset is set or not. - * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF)); -} -#endif /* RCC_CSR_BORRSTF */ - -/** - * @brief Set RMVF bit to clear the reset flags. - * @rmtoll CSR RMVF LL_RCC_ClearResetFlags - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearResetFlags(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_IT_Management IT Management - * @{ - */ - -/** - * @brief Enable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Enable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Enable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Enable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Enable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Enable PLLI2S ready interrupt - * @rmtoll CIR PLLI2SRDYIE LL_RCC_EnableIT_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -} -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Enable PLLSAI ready interrupt - * @rmtoll CIR PLLSAIRDYIE LL_RCC_EnableIT_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLSAIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Disable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Disable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Disable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Disable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Disable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Disable PLLI2S ready interrupt - * @rmtoll CIR PLLI2SRDYIE LL_RCC_DisableIT_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Disable PLLSAI ready interrupt - * @rmtoll CIR PLLSAIRDYIE LL_RCC_DisableIT_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLSAIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Checks if LSI ready interrupt source is enabled or disabled. - * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); -} - -/** - * @brief Checks if LSE ready interrupt source is enabled or disabled. - * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); -} - -/** - * @brief Checks if HSI ready interrupt source is enabled or disabled. - * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); -} - -/** - * @brief Checks if HSE ready interrupt source is enabled or disabled. - * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); -} - -/** - * @brief Checks if PLL ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Checks if PLLI2S ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLI2SRDYIE LL_RCC_IsEnabledIT_PLLI2SRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE) == (RCC_CIR_PLLI2SRDYIE)); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Checks if PLLSAI ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLSAIRDYIE LL_RCC_IsEnabledIT_PLLSAIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE) == (RCC_CIR_PLLSAIRDYIE)); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_RCC_DeInit(void); -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions - * @{ - */ -void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); -#if defined(FMPI2C1) -uint32_t LL_RCC_GetFMPI2CClockFreq(uint32_t FMPI2CxSource); -#endif /* FMPI2C1 */ -#if defined(LPTIM1) -uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); -#endif /* LPTIM1 */ -#if defined(SAI1) -uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); -#endif /* SAI1 */ -#if defined(SDIO) -uint32_t LL_RCC_GetSDIOClockFreq(uint32_t SDIOxSource); -#endif /* SDIO */ -#if defined(RNG) -uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); -#endif /* RNG */ -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); -#endif /* USB_OTG_FS || USB_OTG_HS */ -#if defined(DFSDM1_Channel0) -uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); -uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource); -#endif /* DFSDM1_Channel0 */ -uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); -#if defined(CEC) -uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); -#endif /* CEC */ -#if defined(LTDC) -uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource); -#endif /* LTDC */ -#if defined(SPDIFRX) -uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource); -#endif /* SPDIFRX */ -#if defined(DSI) -uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); -#endif /* DSI */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_RCC_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rng.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rng.h deleted file mode 100644 index 151cb4a..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rng.h +++ /dev/null @@ -1,335 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rng.h - * @author MCD Application Team - * @brief Header file of RNG LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_RNG_H -#define STM32F4xx_LL_RNG_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (RNG) - -/** @defgroup RNG_LL RNG - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants - * @{ - */ - - -/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RNG_ReadReg function - * @{ - */ -#define LL_RNG_SR_DRDY RNG_SR_DRDY /*!< Register contains valid random data */ -#define LL_RNG_SR_CECS RNG_SR_CECS /*!< Clock error current status */ -#define LL_RNG_SR_SECS RNG_SR_SECS /*!< Seed error current status */ -#define LL_RNG_SR_CEIS RNG_SR_CEIS /*!< Clock error interrupt status */ -#define LL_RNG_SR_SEIS RNG_SR_SEIS /*!< Seed error interrupt status */ -/** - * @} - */ - -/** @defgroup RNG_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RNG_ReadReg and LL_RNG_WriteReg macros - * @{ - */ -#define LL_RNG_CR_IE RNG_CR_IE /*!< RNG Interrupt enable */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros - * @{ - */ - -/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RNG register - * @param __INSTANCE__ RNG Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RNG register - * @param __INSTANCE__ RNG Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions - * @{ - */ -/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions - * @{ - */ - -/** - * @brief Enable Random Number Generation - * @rmtoll CR RNGEN LL_RNG_Enable - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx) -{ - SET_BIT(RNGx->CR, RNG_CR_RNGEN); -} - -/** - * @brief Disable Random Number Generation - * @rmtoll CR RNGEN LL_RNG_Disable - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx) -{ - CLEAR_BIT(RNGx->CR, RNG_CR_RNGEN); -} - -/** - * @brief Check if Random Number Generator is enabled - * @rmtoll CR RNGEN LL_RNG_IsEnabled - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Indicate if the RNG Data ready Flag is set or not - * @rmtoll SR DRDY LL_RNG_IsActiveFlag_DRDY - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Clock Error Current Status Flag is set or not - * @rmtoll SR CECS LL_RNG_IsActiveFlag_CECS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Seed Error Current Status Flag is set or not - * @rmtoll SR SECS LL_RNG_IsActiveFlag_SECS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Clock Error Interrupt Status Flag is set or not - * @rmtoll SR CEIS LL_RNG_IsActiveFlag_CEIS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Seed Error Interrupt Status Flag is set or not - * @rmtoll SR SEIS LL_RNG_IsActiveFlag_SEIS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL); -} - -/** - * @brief Clear Clock Error interrupt Status (CEIS) Flag - * @rmtoll SR CEIS LL_RNG_ClearFlag_CEIS - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_ClearFlag_CEIS(RNG_TypeDef *RNGx) -{ - WRITE_REG(RNGx->SR, ~RNG_SR_CEIS); -} - -/** - * @brief Clear Seed Error interrupt Status (SEIS) Flag - * @rmtoll SR SEIS LL_RNG_ClearFlag_SEIS - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_ClearFlag_SEIS(RNG_TypeDef *RNGx) -{ - WRITE_REG(RNGx->SR, ~RNG_SR_SEIS); -} - -/** - * @} - */ - -/** @defgroup RNG_LL_EF_IT_Management IT Management - * @{ - */ - -/** - * @brief Enable Random Number Generator Interrupt - * (applies for either Seed error, Clock Error or Data ready interrupts) - * @rmtoll CR IE LL_RNG_EnableIT - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_EnableIT(RNG_TypeDef *RNGx) -{ - SET_BIT(RNGx->CR, RNG_CR_IE); -} - -/** - * @brief Disable Random Number Generator Interrupt - * (applies for either Seed error, Clock Error or Data ready interrupts) - * @rmtoll CR IE LL_RNG_DisableIT - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_DisableIT(RNG_TypeDef *RNGx) -{ - CLEAR_BIT(RNGx->CR, RNG_CR_IE); -} - -/** - * @brief Check if Random Number Generator Interrupt is enabled - * (applies for either Seed error, Clock Error or Data ready interrupts) - * @rmtoll CR IE LL_RNG_IsEnabledIT - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup RNG_LL_EF_Data_Management Data Management - * @{ - */ - -/** - * @brief Return32-bit Random Number value - * @rmtoll DR RNDATA LL_RNG_ReadRandData32 - * @param RNGx RNG Instance - * @retval Generated 32-bit random value - */ -__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(RNG_TypeDef *RNGx) -{ - return (uint32_t)(READ_REG(RNGx->DR)); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions - * @{ - */ -ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_RNG_H */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rtc.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rtc.h deleted file mode 100644 index 180cc15..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rtc.h +++ /dev/null @@ -1,3663 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rtc.h - * @author MCD Application Team - * @brief Header file of RTC LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_RTC_H -#define STM32F4xx_LL_RTC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RTC) - -/** @defgroup RTC_LL RTC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RTC_LL_Private_Constants RTC Private Constants - * @{ - */ -/* Masks Definition */ -#define RTC_INIT_MASK 0xFFFFFFFFU -#define RTC_RSF_MASK ((uint32_t)~(RTC_ISR_INIT | RTC_ISR_RSF)) - -/* Write protection defines */ -#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU) -#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU) -#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U) - -/* Defines used to combine date & time */ -#define RTC_OFFSET_WEEKDAY 24U -#define RTC_OFFSET_DAY 16U -#define RTC_OFFSET_MONTH 8U -#define RTC_OFFSET_HOUR 16U -#define RTC_OFFSET_MINUTE 8U - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RTC_LL_Private_Macros RTC Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure - * @{ - */ - -/** - * @brief RTC Init structures definition - */ -typedef struct -{ - uint32_t HourFormat; /*!< Specifies the RTC Hours Format. - This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT - - This feature can be modified afterwards using unitary function - @ref LL_RTC_SetHourFormat(). */ - - uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F - - This feature can be modified afterwards using unitary function - @ref LL_RTC_SetAsynchPrescaler(). */ - - uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF - - This feature can be modified afterwards using unitary function - @ref LL_RTC_SetSynchPrescaler(). */ -} LL_RTC_InitTypeDef; - -/** - * @brief RTC Time structure definition - */ -typedef struct -{ - uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. - This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT - - This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */ - - uint8_t Hours; /*!< Specifies the RTC Time Hours. - This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected. - This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. - - This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */ - - uint8_t Minutes; /*!< Specifies the RTC Time Minutes. - This parameter must be a number between Min_Data = 0 and Max_Data = 59 - - This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */ - - uint8_t Seconds; /*!< Specifies the RTC Time Seconds. - This parameter must be a number between Min_Data = 0 and Max_Data = 59 - - This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */ -} LL_RTC_TimeTypeDef; - -/** - * @brief RTC Date structure definition - */ -typedef struct -{ - uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. - This parameter can be a value of @ref RTC_LL_EC_WEEKDAY - - This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */ - - uint8_t Month; /*!< Specifies the RTC Date Month. - This parameter can be a value of @ref RTC_LL_EC_MONTH - - This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */ - - uint8_t Day; /*!< Specifies the RTC Date Day. - This parameter must be a number between Min_Data = 1 and Max_Data = 31 - - This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */ - - uint8_t Year; /*!< Specifies the RTC Date Year. - This parameter must be a number between Min_Data = 0 and Max_Data = 99 - - This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */ -} LL_RTC_DateTypeDef; - -/** - * @brief RTC Alarm structure definition - */ -typedef struct -{ - LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ - - uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. - This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A or @ref RTC_LL_EC_ALMB_MASK for ALARM B. - - This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask() for ALARM A - or @ref LL_RTC_ALMB_SetMask() for ALARM B. - */ - - uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. - This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION for ALARM A or @ref RTC_LL_EC_ALMB_WEEKDAY_SELECTION for ALARM B - - This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday() - for ALARM A or @ref LL_RTC_ALMB_EnableWeekday() or @ref LL_RTC_ALMB_DisableWeekday() for ALARM B - */ - - uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. - If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31. - - This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay() - for ALARM A or @ref LL_RTC_ALMB_SetDay() for ALARM B. - - If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY. - - This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay() - for ALARM A or @ref LL_RTC_ALMB_SetWeekDay() for ALARM B. - */ -} LL_RTC_AlarmTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants - * @{ - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RTC_LL_EC_FORMAT FORMAT - * @{ - */ -#define LL_RTC_FORMAT_BIN 0x00000000U /*!< Binary data format */ -#define LL_RTC_FORMAT_BCD 0x00000001U /*!< BCD data format */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay - * @{ - */ -#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm A Date is selected */ -#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALMB_WEEKDAY_SELECTION RTC Alarm B Date WeekDay - * @{ - */ -#define LL_RTC_ALMB_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm B Date is selected */ -#define LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMBR_WDSEL /*!< Alarm B WeekDay is selected */ -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RTC_ReadReg function - * @{ - */ -#define LL_RTC_ISR_RECALPF RTC_ISR_RECALPF -#if defined(RTC_TAMPER2_SUPPORT) -#define LL_RTC_ISR_TAMP2F RTC_ISR_TAMP2F -#endif /* RTC_TAMPER2_SUPPORT */ -#define LL_RTC_ISR_TAMP1F RTC_ISR_TAMP1F -#define LL_RTC_ISR_TSOVF RTC_ISR_TSOVF -#define LL_RTC_ISR_TSF RTC_ISR_TSF -#define LL_RTC_ISR_WUTF RTC_ISR_WUTF -#define LL_RTC_ISR_ALRBF RTC_ISR_ALRBF -#define LL_RTC_ISR_ALRAF RTC_ISR_ALRAF -#define LL_RTC_ISR_INITF RTC_ISR_INITF -#define LL_RTC_ISR_RSF RTC_ISR_RSF -#define LL_RTC_ISR_INITS RTC_ISR_INITS -#define LL_RTC_ISR_SHPF RTC_ISR_SHPF -#define LL_RTC_ISR_WUTWF RTC_ISR_WUTWF -#define LL_RTC_ISR_ALRBWF RTC_ISR_ALRBWF -#define LL_RTC_ISR_ALRAWF RTC_ISR_ALRAWF -/** - * @} - */ - -/** @defgroup RTC_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions - * @{ - */ -#define LL_RTC_CR_TSIE RTC_CR_TSIE -#define LL_RTC_CR_WUTIE RTC_CR_WUTIE -#define LL_RTC_CR_ALRBIE RTC_CR_ALRBIE -#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE -#define LL_RTC_TAFCR_TAMPIE RTC_TAFCR_TAMPIE -/** - * @} - */ - -/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY - * @{ - */ -#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */ -#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */ -#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */ -#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thrusday */ -#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */ -#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */ -#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_MONTH MONTH - * @{ - */ -#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */ -#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */ -#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */ -#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */ -#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */ -#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */ -#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */ -#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */ -#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */ -#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */ -#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */ -#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT - * @{ - */ -#define LL_RTC_HOURFORMAT_24HOUR 0x00000000U /*!< 24 hour/day format */ -#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT - * @{ - */ -#define LL_RTC_ALARMOUT_DISABLE 0x00000000U /*!< Output disabled */ -#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ -#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */ -#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE - * @{ - */ -#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN 0x00000000U /*!< RTC_ALARM, when mapped on PC13, is open-drain output */ -#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL RTC_TAFCR_ALARMOUTTYPE /*!< RTC_ALARM, when mapped on PC13, is push-pull output */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN - * @{ - */ -#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0x00000000U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL)*/ -#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT - * @{ - */ -#define LL_RTC_TIME_FORMAT_AM_OR_24 0x00000000U /*!< AM or 24-hour format */ -#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND - * @{ - */ -#define LL_RTC_SHIFT_SECOND_DELAY 0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */ -#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK - * @{ - */ -#define LL_RTC_ALMA_MASK_NONE 0x00000000U /*!< No masks applied on Alarm A*/ -#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ -#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ -#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ -#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ -#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT - * @{ - */ -#define LL_RTC_ALMA_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ -#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALMB_MASK ALARMB MASK - * @{ - */ -#define LL_RTC_ALMB_MASK_NONE 0x00000000U /*!< No masks applied on Alarm B */ -#define LL_RTC_ALMB_MASK_DATEWEEKDAY RTC_ALRMBR_MSK4 /*!< Date/day do not care in Alarm B comparison */ -#define LL_RTC_ALMB_MASK_HOURS RTC_ALRMBR_MSK3 /*!< Hours do not care in Alarm B comparison */ -#define LL_RTC_ALMB_MASK_MINUTES RTC_ALRMBR_MSK2 /*!< Minutes do not care in Alarm B comparison */ -#define LL_RTC_ALMB_MASK_SECONDS RTC_ALRMBR_MSK1 /*!< Seconds do not care in Alarm B comparison */ -#define LL_RTC_ALMB_MASK_ALL (RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1) /*!< Masks all */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_ALMB_TIME_FORMAT ALARMB TIME FORMAT - * @{ - */ -#define LL_RTC_ALMB_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ -#define LL_RTC_ALMB_TIME_FORMAT_PM RTC_ALRMBR_PM /*!< PM */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE - * @{ - */ -#define LL_RTC_TIMESTAMP_EDGE_RISING 0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */ -#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT - * @{ - */ -#define LL_RTC_TS_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ -#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TAMPER TAMPER - * @{ - */ -#define LL_RTC_TAMPER_1 RTC_TAFCR_TAMP1E /*!< RTC_TAMP1 input detection */ -#if defined(RTC_TAMPER2_SUPPORT) -#define LL_RTC_TAMPER_2 RTC_TAFCR_TAMP2E /*!< RTC_TAMP2 input detection */ -#endif /* RTC_TAMPER2_SUPPORT */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION - * @{ - */ -#define LL_RTC_TAMPER_DURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ -#define LL_RTC_TAMPER_DURATION_2RTCCLK RTC_TAFCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ -#define LL_RTC_TAMPER_DURATION_4RTCCLK RTC_TAFCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ -#define LL_RTC_TAMPER_DURATION_8RTCCLK RTC_TAFCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER - * @{ - */ -#define LL_RTC_TAMPER_FILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ -#define LL_RTC_TAMPER_FILTER_2SAMPLE RTC_TAFCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ -#define LL_RTC_TAMPER_FILTER_4SAMPLE RTC_TAFCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ -#define LL_RTC_TAMPER_FILTER_8SAMPLE RTC_TAFCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER - * @{ - */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 RTC_TAFCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 RTC_TAFCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 RTC_TAFCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (RTC_TAFCR_TAMPFREQ_2 | RTC_TAFCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (RTC_TAFCR_TAMPFREQ_2 | RTC_TAFCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ -#define LL_RTC_TAMPER_SAMPLFREQDIV_256 RTC_TAFCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL - * @{ - */ -#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 RTC_TAFCR_TAMP1TRG /*!< RTC_TAMP1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ -#if defined(RTC_TAMPER2_SUPPORT) -#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 RTC_TAFCR_TAMP2TRG /*!< RTC_TAMP2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ -#endif /* RTC_TAMPER2_SUPPORT */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV - * @{ - */ -#define LL_RTC_WAKEUPCLOCK_DIV_16 0x00000000U /*!< RTC/16 clock is selected */ -#define LL_RTC_WAKEUPCLOCK_DIV_8 (RTC_CR_WUCKSEL_0) /*!< RTC/8 clock is selected */ -#define LL_RTC_WAKEUPCLOCK_DIV_4 (RTC_CR_WUCKSEL_1) /*!< RTC/4 clock is selected */ -#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */ -#define LL_RTC_WAKEUPCLOCK_CKSPRE (RTC_CR_WUCKSEL_2) /*!< ck_spre (usually 1 Hz) clock is selected */ -#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value*/ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_BKP BACKUP - * @{ - */ -#define LL_RTC_BKP_DR0 0x00000000U -#define LL_RTC_BKP_DR1 0x00000001U -#define LL_RTC_BKP_DR2 0x00000002U -#define LL_RTC_BKP_DR3 0x00000003U -#define LL_RTC_BKP_DR4 0x00000004U -#define LL_RTC_BKP_DR5 0x00000005U -#define LL_RTC_BKP_DR6 0x00000006U -#define LL_RTC_BKP_DR7 0x00000007U -#define LL_RTC_BKP_DR8 0x00000008U -#define LL_RTC_BKP_DR9 0x00000009U -#define LL_RTC_BKP_DR10 0x0000000AU -#define LL_RTC_BKP_DR11 0x0000000BU -#define LL_RTC_BKP_DR12 0x0000000CU -#define LL_RTC_BKP_DR13 0x0000000DU -#define LL_RTC_BKP_DR14 0x0000000EU -#define LL_RTC_BKP_DR15 0x0000000FU -#define LL_RTC_BKP_DR16 0x00000010U -#define LL_RTC_BKP_DR17 0x00000011U -#define LL_RTC_BKP_DR18 0x00000012U -#define LL_RTC_BKP_DR19 0x00000013U -/** - * @} - */ - -/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output - * @{ - */ -#define LL_RTC_CALIB_OUTPUT_NONE 0x00000000U /*!< Calibration output disabled */ -#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */ -#define LL_RTC_CALIB_OUTPUT_512HZ (RTC_CR_COE) /*!< Calibration output is 512 Hz */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_CALIB_SIGN Coarse digital calibration sign - * @{ - */ -#define LL_RTC_CALIB_SIGN_POSITIVE 0x00000000U /*!< Positive calibration: calendar update frequency is increased */ -#define LL_RTC_CALIB_SIGN_NEGATIVE RTC_CALIBR_DCS /*!< Negative calibration: calendar update frequency is decreased */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion - * @{ - */ -#define LL_RTC_CALIB_INSERTPULSE_NONE 0x00000000U /*!< No RTCCLK pulses are added */ -#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period - * @{ - */ -#define LL_RTC_CALIB_PERIOD_32SEC 0x00000000U /*!< Use a 32-second calibration cycle period */ -#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ -#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TSINSEL TIMESTAMP mapping - * @{ - */ -#define LL_RTC_TimeStampPin_Default 0x00000000U /*!< Use RTC_AF1 as TIMESTAMP */ -#if defined(RTC_AF2_SUPPORT) -#define LL_RTC_TimeStampPin_Pos1 RTC_TAFCR_TSINSEL /*!< Use RTC_AF2 as TIMESTAMP */ -#endif /* RTC_AF2_SUPPORT */ -/** - * @} - */ - -/** @defgroup RTC_LL_EC_TAMP1INSEL TAMPER1 mapping - * @{ - */ -#define LL_RTC_TamperPin_Default 0x00000000U /*!< Use RTC_AF1 as TAMPER1 */ -#if defined(RTC_AF2_SUPPORT) -#define LL_RTC_TamperPin_Pos1 RTC_TAFCR_TAMP1INSEL /*!< Use RTC_AF2 as TAMPER1 */ -#endif /* RTC_AF2_SUPPORT */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros - * @{ - */ - -/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RTC register - * @param __INSTANCE__ RTC Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RTC register - * @param __INSTANCE__ RTC Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup RTC_LL_EM_Convert Convert helper Macros - * @{ - */ - -/** - * @brief Helper macro to convert a value from 2 digit decimal format to BCD format - * @param __VALUE__ Byte to be converted - * @retval Converted byte - */ -#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) - -/** - * @brief Helper macro to convert a value from BCD format to 2 digit decimal format - * @param __VALUE__ BCD value to be converted - * @retval Converted byte - */ -#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU)) - -/** - * @} - */ - -/** @defgroup RTC_LL_EM_Date Date helper Macros - * @{ - */ - -/** - * @brief Helper macro to retrieve weekday. - * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - */ -#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) - -/** - * @brief Helper macro to retrieve Year in BCD format - * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get - * @retval Year in BCD format (0x00 . . . 0x99) - */ -#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) - -/** - * @brief Helper macro to retrieve Month in BCD format - * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_MONTH_JANUARY - * @arg @ref LL_RTC_MONTH_FEBRUARY - * @arg @ref LL_RTC_MONTH_MARCH - * @arg @ref LL_RTC_MONTH_APRIL - * @arg @ref LL_RTC_MONTH_MAY - * @arg @ref LL_RTC_MONTH_JUNE - * @arg @ref LL_RTC_MONTH_JULY - * @arg @ref LL_RTC_MONTH_AUGUST - * @arg @ref LL_RTC_MONTH_SEPTEMBER - * @arg @ref LL_RTC_MONTH_OCTOBER - * @arg @ref LL_RTC_MONTH_NOVEMBER - * @arg @ref LL_RTC_MONTH_DECEMBER - */ -#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) - -/** - * @brief Helper macro to retrieve Day in BCD format - * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get - * @retval Day in BCD format (0x01 . . . 0x31) - */ -#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) - -/** - * @} - */ - -/** @defgroup RTC_LL_EM_Time Time helper Macros - * @{ - */ - -/** - * @brief Helper macro to retrieve hour in BCD format - * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function - * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) - */ -#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) - -/** - * @brief Helper macro to retrieve minute in BCD format - * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function - * @retval Minutes in BCD format (0x00. . .0x59) - */ -#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) - -/** - * @brief Helper macro to retrieve second in BCD format - * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function - * @retval Seconds in format (0x00. . .0x59) - */ -#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions - * @{ - */ - -/** @defgroup RTC_LL_EF_Configuration Configuration - * @{ - */ - -/** - * @brief Set Hours format (24 hour/day or AM/PM hour format) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll CR FMT LL_RTC_SetHourFormat - * @param RTCx RTC Instance - * @param HourFormat This parameter can be one of the following values: - * @arg @ref LL_RTC_HOURFORMAT_24HOUR - * @arg @ref LL_RTC_HOURFORMAT_AMPM - * @retval None - */ -__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) -{ - MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); -} - -/** - * @brief Get Hours format (24 hour/day or AM/PM hour format) - * @rmtoll CR FMT LL_RTC_GetHourFormat - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_HOURFORMAT_24HOUR - * @arg @ref LL_RTC_HOURFORMAT_AMPM - */ -__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); -} - -/** - * @brief Select the flag to be routed to RTC_ALARM output - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR OSEL LL_RTC_SetAlarmOutEvent - * @param RTCx RTC Instance - * @param AlarmOutput This parameter can be one of the following values: - * @arg @ref LL_RTC_ALARMOUT_DISABLE - * @arg @ref LL_RTC_ALARMOUT_ALMA - * @arg @ref LL_RTC_ALARMOUT_ALMB - * @arg @ref LL_RTC_ALARMOUT_WAKEUP - * @retval None - */ -__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) -{ - MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); -} - -/** - * @brief Get the flag to be routed to RTC_ALARM output - * @rmtoll CR OSEL LL_RTC_GetAlarmOutEvent - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_ALARMOUT_DISABLE - * @arg @ref LL_RTC_ALARMOUT_ALMA - * @arg @ref LL_RTC_ALARMOUT_ALMB - * @arg @ref LL_RTC_ALARMOUT_WAKEUP - */ -__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); -} - -/** - * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) - * @note Used only when RTC_ALARM is mapped on PC13 - * @rmtoll TAFCR ALARMOUTTYPE LL_RTC_SetAlarmOutputType - * @param RTCx RTC Instance - * @param Output This parameter can be one of the following values: - * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN - * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL - * @retval None - */ -__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) -{ - MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_ALARMOUTTYPE, Output); -} - -/** - * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) - * @note used only when RTC_ALARM is mapped on PC13 - * @rmtoll TAFCR ALARMOUTTYPE LL_RTC_GetAlarmOutputType - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN - * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL - */ -__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_ALARMOUTTYPE)); -} - -/** - * @brief Enable initialization mode - * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) - * and prescaler register (RTC_PRER). - * Counters are stopped and start counting from the new value when INIT is reset. - * @rmtoll ISR INIT LL_RTC_EnableInitMode - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) -{ - /* Set the Initialization mode */ - WRITE_REG(RTCx->ISR, RTC_INIT_MASK); -} - -/** - * @brief Disable initialization mode (Free running mode) - * @rmtoll ISR INIT LL_RTC_DisableInitMode - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) -{ - /* Exit Initialization mode */ - WRITE_REG(RTCx->ISR, (uint32_t)~RTC_ISR_INIT); -} - -/** - * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR POL LL_RTC_SetOutputPolarity - * @param RTCx RTC Instance - * @param Polarity This parameter can be one of the following values: - * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH - * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW - * @retval None - */ -__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) -{ - MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); -} - -/** - * @brief Get Output polarity - * @rmtoll CR POL LL_RTC_GetOutputPolarity - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH - * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW - */ -__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); -} - -/** - * @brief Enable Bypass the shadow registers - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR BYPSHAD LL_RTC_EnableShadowRegBypass - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); -} - -/** - * @brief Disable Bypass the shadow registers - * @rmtoll CR BYPSHAD LL_RTC_DisableShadowRegBypass - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); -} - -/** - * @brief Check if Shadow registers bypass is enabled or not. - * @rmtoll CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)) ? 1UL : 0UL); -} - -/** - * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll CR REFCKON LL_RTC_EnableRefClock - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_REFCKON); -} - -/** - * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll CR REFCKON LL_RTC_DisableRefClock - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON); -} - -/** - * @brief Set Asynchronous prescaler factor - * @rmtoll PRER PREDIV_A LL_RTC_SetAsynchPrescaler - * @param RTCx RTC Instance - * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F - * @retval None - */ -__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) -{ - MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos); -} - -/** - * @brief Set Synchronous prescaler factor - * @rmtoll PRER PREDIV_S LL_RTC_SetSynchPrescaler - * @param RTCx RTC Instance - * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF - * @retval None - */ -__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) -{ - MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); -} - -/** - * @brief Get Asynchronous prescaler factor - * @rmtoll PRER PREDIV_A LL_RTC_GetAsynchPrescaler - * @param RTCx RTC Instance - * @retval Value between Min_Data = 0 and Max_Data = 0x7F - */ -__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos); -} - -/** - * @brief Get Synchronous prescaler factor - * @rmtoll PRER PREDIV_S LL_RTC_GetSynchPrescaler - * @param RTCx RTC Instance - * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF - */ -__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); -} - -/** - * @brief Enable the write protection for RTC registers. - * @rmtoll WPR KEY LL_RTC_EnableWriteProtection - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); -} - -/** - * @brief Disable the write protection for RTC registers. - * @rmtoll WPR KEY LL_RTC_DisableWriteProtection - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); - WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Time Time - * @{ - */ - -/** - * @brief Set time format (AM/24-hour or PM notation) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll TR PM LL_RTC_TIME_SetFormat - * @param RTCx RTC Instance - * @param TimeFormat This parameter can be one of the following values: - * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 - * @arg @ref LL_RTC_TIME_FORMAT_PM - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) -{ - MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); -} - -/** - * @brief Get time format (AM or PM notation) - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar - * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). - * @rmtoll TR PM LL_RTC_TIME_GetFormat - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 - * @arg @ref LL_RTC_TIME_FORMAT_PM - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); -} - -/** - * @brief Set Hours in BCD format - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format - * @rmtoll TR HT LL_RTC_TIME_SetHour\n - * TR HU LL_RTC_TIME_SetHour - * @param RTCx RTC Instance - * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) -{ - MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), - (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos))); -} - -/** - * @brief Get Hours in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar - * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to - * Binary format - * @rmtoll TR HT LL_RTC_TIME_GetHour\n - * TR HU LL_RTC_TIME_GetHour - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos); -} - -/** - * @brief Set Minutes in BCD format - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format - * @rmtoll TR MNT LL_RTC_TIME_SetMinute\n - * TR MNU LL_RTC_TIME_SetMinute - * @param RTCx RTC Instance - * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) -{ - MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), - (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos))); -} - -/** - * @brief Get Minutes in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar - * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD - * to Binary format - * @rmtoll TR MNT LL_RTC_TIME_GetMinute\n - * TR MNU LL_RTC_TIME_GetMinute - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); -} - -/** - * @brief Set Seconds in BCD format - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format - * @rmtoll TR ST LL_RTC_TIME_SetSecond\n - * TR SU LL_RTC_TIME_SetSecond - * @param RTCx RTC Instance - * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) -{ - MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), - (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos))); -} - -/** - * @brief Get Seconds in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar - * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD - * to Binary format - * @rmtoll TR ST LL_RTC_TIME_GetSecond\n - * TR SU LL_RTC_TIME_GetSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); -} - -/** - * @brief Set time (hour, minute and second) in BCD format - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @note TimeFormat and Hours should follow the same format - * @rmtoll TR PM LL_RTC_TIME_Config\n - * TR HT LL_RTC_TIME_Config\n - * TR HU LL_RTC_TIME_Config\n - * TR MNT LL_RTC_TIME_Config\n - * TR MNU LL_RTC_TIME_Config\n - * TR ST LL_RTC_TIME_Config\n - * TR SU LL_RTC_TIME_Config - * @param RTCx RTC Instance - * @param Format12_24 This parameter can be one of the following values: - * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 - * @arg @ref LL_RTC_TIME_FORMAT_PM - * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 - * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) -{ - uint32_t temp; - - temp = Format12_24 | \ - (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \ - (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \ - (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)); - MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); -} - -/** - * @brief Get time (hour, minute and second) in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar - * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). - * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND - * are available to get independently each parameter. - * @rmtoll TR HT LL_RTC_TIME_Get\n - * TR HU LL_RTC_TIME_Get\n - * TR MNT LL_RTC_TIME_Get\n - * TR MNU LL_RTC_TIME_Get\n - * TR ST LL_RTC_TIME_Get\n - * TR SU LL_RTC_TIME_Get - * @param RTCx RTC Instance - * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU))); -} - -/** - * @brief Memorize whether the daylight saving time change has been performed - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR BKP LL_RTC_TIME_EnableDayLightStore - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_BKP); -} - -/** - * @brief Disable memorization whether the daylight saving time change has been performed. - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR BKP LL_RTC_TIME_DisableDayLightStore - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_BKP); -} - -/** - * @brief Check if RTC Day Light Saving stored operation has been enabled or not - * @rmtoll CR BKP LL_RTC_TIME_IsDayLightStoreEnabled - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP)) ? 1UL : 0UL); -} - -/** - * @brief Subtract 1 hour (winter time change) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR SUB1H LL_RTC_TIME_DecHour - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_SUB1H); -} - -/** - * @brief Add 1 hour (summer time change) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ADD1H LL_RTC_TIME_IncHour - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_ADD1H); -} - -/** - * @brief Get subseconds value in the synchronous prescaler counter. - * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through - * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar - * SubSeconds value in second fraction ratio with time unit following - * generic formula: - * ==> Seconds fraction ratio * time_unit = - * [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit - * This conversion can be performed only if no shift operation is pending - * (ie. SHFP=0) when PREDIV_S >= SS. - * @rmtoll SSR SS LL_RTC_TIME_GetSubSecond - * @param RTCx RTC Instance - * @retval Subseconds value (number between 0 and 65535) - */ -__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); -} - -/** - * @brief Synchronize to a remote clock with a high degree of precision. - * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note When REFCKON is set, firmware must not write to Shift control register. - * @rmtoll SHIFTR ADD1S LL_RTC_TIME_Synchronize\n - * SHIFTR SUBFS LL_RTC_TIME_Synchronize - * @param RTCx RTC Instance - * @param ShiftSecond This parameter can be one of the following values: - * @arg @ref LL_RTC_SHIFT_SECOND_DELAY - * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE - * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) - * @retval None - */ -__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) -{ - WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Date Date - * @{ - */ - -/** - * @brief Set Year in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format - * @rmtoll DR YT LL_RTC_DATE_SetYear\n - * DR YU LL_RTC_DATE_SetYear - * @param RTCx RTC Instance - * @param Year Value between Min_Data=0x00 and Max_Data=0x99 - * @retval None - */ -__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) -{ - MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), - (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos))); -} - -/** - * @brief Get Year in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format - * @rmtoll DR YT LL_RTC_DATE_GetYear\n - * DR YU LL_RTC_DATE_GetYear - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x99 - */ -__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos); -} - -/** - * @brief Set Week day - * @rmtoll DR WDU LL_RTC_DATE_SetWeekDay - * @param RTCx RTC Instance - * @param WeekDay This parameter can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - * @retval None - */ -__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) -{ - MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos); -} - -/** - * @brief Get Week day - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @rmtoll DR WDU LL_RTC_DATE_GetWeekDay - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - */ -__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos); -} - -/** - * @brief Set Month in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format - * @rmtoll DR MT LL_RTC_DATE_SetMonth\n - * DR MU LL_RTC_DATE_SetMonth - * @param RTCx RTC Instance - * @param Month This parameter can be one of the following values: - * @arg @ref LL_RTC_MONTH_JANUARY - * @arg @ref LL_RTC_MONTH_FEBRUARY - * @arg @ref LL_RTC_MONTH_MARCH - * @arg @ref LL_RTC_MONTH_APRIL - * @arg @ref LL_RTC_MONTH_MAY - * @arg @ref LL_RTC_MONTH_JUNE - * @arg @ref LL_RTC_MONTH_JULY - * @arg @ref LL_RTC_MONTH_AUGUST - * @arg @ref LL_RTC_MONTH_SEPTEMBER - * @arg @ref LL_RTC_MONTH_OCTOBER - * @arg @ref LL_RTC_MONTH_NOVEMBER - * @arg @ref LL_RTC_MONTH_DECEMBER - * @retval None - */ -__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) -{ - MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), - (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos))); -} - -/** - * @brief Get Month in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format - * @rmtoll DR MT LL_RTC_DATE_GetMonth\n - * DR MU LL_RTC_DATE_GetMonth - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_MONTH_JANUARY - * @arg @ref LL_RTC_MONTH_FEBRUARY - * @arg @ref LL_RTC_MONTH_MARCH - * @arg @ref LL_RTC_MONTH_APRIL - * @arg @ref LL_RTC_MONTH_MAY - * @arg @ref LL_RTC_MONTH_JUNE - * @arg @ref LL_RTC_MONTH_JULY - * @arg @ref LL_RTC_MONTH_AUGUST - * @arg @ref LL_RTC_MONTH_SEPTEMBER - * @arg @ref LL_RTC_MONTH_OCTOBER - * @arg @ref LL_RTC_MONTH_NOVEMBER - * @arg @ref LL_RTC_MONTH_DECEMBER - */ -__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU))) >> RTC_DR_MU_Pos); -} - -/** - * @brief Set Day in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format - * @rmtoll DR DT LL_RTC_DATE_SetDay\n - * DR DU LL_RTC_DATE_SetDay - * @param RTCx RTC Instance - * @param Day Value between Min_Data=0x01 and Max_Data=0x31 - * @retval None - */ -__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) -{ - MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), - (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos))); -} - -/** - * @brief Get Day in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format - * @rmtoll DR DT LL_RTC_DATE_GetDay\n - * DR DU LL_RTC_DATE_GetDay - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x31 - */ -__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos); -} - -/** - * @brief Set date (WeekDay, Day, Month and Year) in BCD format - * @rmtoll DR WDU LL_RTC_DATE_Config\n - * DR MT LL_RTC_DATE_Config\n - * DR MU LL_RTC_DATE_Config\n - * DR DT LL_RTC_DATE_Config\n - * DR DU LL_RTC_DATE_Config\n - * DR YT LL_RTC_DATE_Config\n - * DR YU LL_RTC_DATE_Config - * @param RTCx RTC Instance - * @param WeekDay This parameter can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - * @param Day Value between Min_Data=0x01 and Max_Data=0x31 - * @param Month This parameter can be one of the following values: - * @arg @ref LL_RTC_MONTH_JANUARY - * @arg @ref LL_RTC_MONTH_FEBRUARY - * @arg @ref LL_RTC_MONTH_MARCH - * @arg @ref LL_RTC_MONTH_APRIL - * @arg @ref LL_RTC_MONTH_MAY - * @arg @ref LL_RTC_MONTH_JUNE - * @arg @ref LL_RTC_MONTH_JULY - * @arg @ref LL_RTC_MONTH_AUGUST - * @arg @ref LL_RTC_MONTH_SEPTEMBER - * @arg @ref LL_RTC_MONTH_OCTOBER - * @arg @ref LL_RTC_MONTH_NOVEMBER - * @arg @ref LL_RTC_MONTH_DECEMBER - * @param Year Value between Min_Data=0x00 and Max_Data=0x99 - * @retval None - */ -__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, uint32_t Year) -{ - uint32_t temp; - - temp = ( WeekDay << RTC_DR_WDU_Pos) | \ - (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \ - (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \ - (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)); - - MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); -} - -/** - * @brief Get date (WeekDay, Day, Month and Year) in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set - * before reading this bit - * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, - * and __LL_RTC_GET_DAY are available to get independently each parameter. - * @rmtoll DR WDU LL_RTC_DATE_Get\n - * DR MT LL_RTC_DATE_Get\n - * DR MU LL_RTC_DATE_Get\n - * DR DT LL_RTC_DATE_Get\n - * DR DU LL_RTC_DATE_Get\n - * DR YT LL_RTC_DATE_Get\n - * DR YU LL_RTC_DATE_Get - * @param RTCx RTC Instance - * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). - */ -__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx) -{ - uint32_t temp; - - temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU)); - - return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \ - (((temp & (RTC_DR_DT | RTC_DR_DU)) >> RTC_DR_DU_Pos) << RTC_OFFSET_DAY) | \ - (((temp & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos) << RTC_OFFSET_MONTH) | \ - ((temp & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_ALARMA ALARMA - * @{ - */ - -/** - * @brief Enable Alarm A - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRAE LL_RTC_ALMA_Enable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_ALRAE); -} - -/** - * @brief Disable Alarm A - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRAE LL_RTC_ALMA_Disable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); -} - -/** - * @brief Specify the Alarm A masks. - * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_SetMask\n - * ALRMAR MSK3 LL_RTC_ALMA_SetMask\n - * ALRMAR MSK2 LL_RTC_ALMA_SetMask\n - * ALRMAR MSK1 LL_RTC_ALMA_SetMask - * @param RTCx RTC Instance - * @param Mask This parameter can be a combination of the following values: - * @arg @ref LL_RTC_ALMA_MASK_NONE - * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY - * @arg @ref LL_RTC_ALMA_MASK_HOURS - * @arg @ref LL_RTC_ALMA_MASK_MINUTES - * @arg @ref LL_RTC_ALMA_MASK_SECONDS - * @arg @ref LL_RTC_ALMA_MASK_ALL - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) -{ - MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); -} - -/** - * @brief Get the Alarm A masks. - * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_GetMask\n - * ALRMAR MSK3 LL_RTC_ALMA_GetMask\n - * ALRMAR MSK2 LL_RTC_ALMA_GetMask\n - * ALRMAR MSK1 LL_RTC_ALMA_GetMask - * @param RTCx RTC Instance - * @retval Returned value can be can be a combination of the following values: - * @arg @ref LL_RTC_ALMA_MASK_NONE - * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY - * @arg @ref LL_RTC_ALMA_MASK_HOURS - * @arg @ref LL_RTC_ALMA_MASK_MINUTES - * @arg @ref LL_RTC_ALMA_MASK_SECONDS - * @arg @ref LL_RTC_ALMA_MASK_ALL - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); -} - -/** - * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) - * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); -} - -/** - * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) - * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); -} - -/** - * @brief Set ALARM A Day in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format - * @rmtoll ALRMAR DT LL_RTC_ALMA_SetDay\n - * ALRMAR DU LL_RTC_ALMA_SetDay - * @param RTCx RTC Instance - * @param Day Value between Min_Data=0x01 and Max_Data=0x31 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) -{ - MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), - (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos))); -} - -/** - * @brief Get ALARM A Day in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format - * @rmtoll ALRMAR DT LL_RTC_ALMA_GetDay\n - * ALRMAR DU LL_RTC_ALMA_GetDay - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x31 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos); -} - -/** - * @brief Set ALARM A Weekday - * @rmtoll ALRMAR DU LL_RTC_ALMA_SetWeekDay - * @param RTCx RTC Instance - * @param WeekDay This parameter can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) -{ - MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos); -} - -/** - * @brief Get ALARM A Weekday - * @rmtoll ALRMAR DU LL_RTC_ALMA_GetWeekDay - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos); -} - -/** - * @brief Set Alarm A time format (AM/24-hour or PM notation) - * @rmtoll ALRMAR PM LL_RTC_ALMA_SetTimeFormat - * @param RTCx RTC Instance - * @param TimeFormat This parameter can be one of the following values: - * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM - * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) -{ - MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); -} - -/** - * @brief Get Alarm A time format (AM or PM notation) - * @rmtoll ALRMAR PM LL_RTC_ALMA_GetTimeFormat - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM - * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); -} - -/** - * @brief Set ALARM A Hours in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format - * @rmtoll ALRMAR HT LL_RTC_ALMA_SetHour\n - * ALRMAR HU LL_RTC_ALMA_SetHour - * @param RTCx RTC Instance - * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) -{ - MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), - (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos))); -} - -/** - * @brief Get ALARM A Hours in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format - * @rmtoll ALRMAR HT LL_RTC_ALMA_GetHour\n - * ALRMAR HU LL_RTC_ALMA_GetHour - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos); -} - -/** - * @brief Set ALARM A Minutes in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format - * @rmtoll ALRMAR MNT LL_RTC_ALMA_SetMinute\n - * ALRMAR MNU LL_RTC_ALMA_SetMinute - * @param RTCx RTC Instance - * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) -{ - MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), - (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos))); -} - -/** - * @brief Get ALARM A Minutes in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format - * @rmtoll ALRMAR MNT LL_RTC_ALMA_GetMinute\n - * ALRMAR MNU LL_RTC_ALMA_GetMinute - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos); -} - -/** - * @brief Set ALARM A Seconds in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format - * @rmtoll ALRMAR ST LL_RTC_ALMA_SetSecond\n - * ALRMAR SU LL_RTC_ALMA_SetSecond - * @param RTCx RTC Instance - * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) -{ - MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), - (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos))); -} - -/** - * @brief Get ALARM A Seconds in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format - * @rmtoll ALRMAR ST LL_RTC_ALMA_GetSecond\n - * ALRMAR SU LL_RTC_ALMA_GetSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos); -} - -/** - * @brief Set Alarm A Time (hour, minute and second) in BCD format - * @rmtoll ALRMAR PM LL_RTC_ALMA_ConfigTime\n - * ALRMAR HT LL_RTC_ALMA_ConfigTime\n - * ALRMAR HU LL_RTC_ALMA_ConfigTime\n - * ALRMAR MNT LL_RTC_ALMA_ConfigTime\n - * ALRMAR MNU LL_RTC_ALMA_ConfigTime\n - * ALRMAR ST LL_RTC_ALMA_ConfigTime\n - * ALRMAR SU LL_RTC_ALMA_ConfigTime - * @param RTCx RTC Instance - * @param Format12_24 This parameter can be one of the following values: - * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM - * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM - * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 - * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) -{ - uint32_t temp; - - temp = Format12_24 | \ - (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \ - (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \ - (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)); - - MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp); -} - -/** - * @brief Get Alarm B Time (hour, minute and second) in BCD format - * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND - * are available to get independently each parameter. - * @rmtoll ALRMAR HT LL_RTC_ALMA_GetTime\n - * ALRMAR HU LL_RTC_ALMA_GetTime\n - * ALRMAR MNT LL_RTC_ALMA_GetTime\n - * ALRMAR MNU LL_RTC_ALMA_GetTime\n - * ALRMAR ST LL_RTC_ALMA_GetTime\n - * ALRMAR SU LL_RTC_ALMA_GetTime - * @param RTCx RTC Instance - * @retval Combination of hours, minutes and seconds. - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx) -{ - return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); -} - -/** - * @brief Mask the most-significant bits of the subseconds field starting from - * the bit specified in parameter Mask - * @note This register can be written only when ALRAE is reset in RTC_CR register, - * or in initialization mode. - * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask - * @param RTCx RTC Instance - * @param Mask Value between Min_Data=0x00 and Max_Data=0xF - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) -{ - MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos); -} - -/** - * @brief Get Alarm A subseconds mask - * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos); -} - -/** - * @brief Set Alarm A subseconds value - * @rmtoll ALRMASSR SS LL_RTC_ALMA_SetSubSecond - * @param RTCx RTC Instance - * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) -{ - MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); -} - -/** - * @brief Get Alarm A subseconds value - * @rmtoll ALRMASSR SS LL_RTC_ALMA_GetSubSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF - */ -__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_ALARMB ALARMB - * @{ - */ - -/** - * @brief Enable Alarm B - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRBE LL_RTC_ALMB_Enable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_Enable(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_ALRBE); -} - -/** - * @brief Disable Alarm B - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRBE LL_RTC_ALMB_Disable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_Disable(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_ALRBE); -} - -/** - * @brief Specify the Alarm B masks. - * @rmtoll ALRMBR MSK4 LL_RTC_ALMB_SetMask\n - * ALRMBR MSK3 LL_RTC_ALMB_SetMask\n - * ALRMBR MSK2 LL_RTC_ALMB_SetMask\n - * ALRMBR MSK1 LL_RTC_ALMB_SetMask - * @param RTCx RTC Instance - * @param Mask This parameter can be a combination of the following values: - * @arg @ref LL_RTC_ALMB_MASK_NONE - * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY - * @arg @ref LL_RTC_ALMB_MASK_HOURS - * @arg @ref LL_RTC_ALMB_MASK_MINUTES - * @arg @ref LL_RTC_ALMB_MASK_SECONDS - * @arg @ref LL_RTC_ALMB_MASK_ALL - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) -{ - MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1, Mask); -} - -/** - * @brief Get the Alarm B masks. - * @rmtoll ALRMBR MSK4 LL_RTC_ALMB_GetMask\n - * ALRMBR MSK3 LL_RTC_ALMB_GetMask\n - * ALRMBR MSK2 LL_RTC_ALMB_GetMask\n - * ALRMBR MSK1 LL_RTC_ALMB_GetMask - * @param RTCx RTC Instance - * @retval Returned value can be can be a combination of the following values: - * @arg @ref LL_RTC_ALMB_MASK_NONE - * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY - * @arg @ref LL_RTC_ALMB_MASK_HOURS - * @arg @ref LL_RTC_ALMB_MASK_MINUTES - * @arg @ref LL_RTC_ALMB_MASK_SECONDS - * @arg @ref LL_RTC_ALMB_MASK_ALL - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMask(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1)); -} - -/** - * @brief Enable AlarmB Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) - * @rmtoll ALRMBR WDSEL LL_RTC_ALMB_EnableWeekday - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_EnableWeekday(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); -} - -/** - * @brief Disable AlarmB Week day selection (DU[3:0] represents the date ) - * @rmtoll ALRMBR WDSEL LL_RTC_ALMB_DisableWeekday - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_DisableWeekday(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); -} - -/** - * @brief Set ALARM B Day in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format - * @rmtoll ALRMBR DT LL_RTC_ALMB_SetDay\n - * ALRMBR DU LL_RTC_ALMB_SetDay - * @param RTCx RTC Instance - * @param Day Value between Min_Data=0x01 and Max_Data=0x31 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetDay(RTC_TypeDef *RTCx, uint32_t Day) -{ - MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU), - (((Day & 0xF0U) << (RTC_ALRMBR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMBR_DU_Pos))); -} - -/** - * @brief Get ALARM B Day in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format - * @rmtoll ALRMBR DT LL_RTC_ALMB_GetDay\n - * ALRMBR DU LL_RTC_ALMB_GetDay - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x31 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU))) >> RTC_ALRMBR_DU_Pos); -} - -/** - * @brief Set ALARM B Weekday - * @rmtoll ALRMBR DU LL_RTC_ALMB_SetWeekDay - * @param RTCx RTC Instance - * @param WeekDay This parameter can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) -{ - MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_DU, WeekDay << RTC_ALRMBR_DU_Pos); -} - -/** - * @brief Get ALARM B Weekday - * @rmtoll ALRMBR DU LL_RTC_ALMB_GetWeekDay - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetWeekDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_DU) >> RTC_ALRMBR_DU_Pos); -} - -/** - * @brief Set ALARM B time format (AM/24-hour or PM notation) - * @rmtoll ALRMBR PM LL_RTC_ALMB_SetTimeFormat - * @param RTCx RTC Instance - * @param TimeFormat This parameter can be one of the following values: - * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM - * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) -{ - MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM, TimeFormat); -} - -/** - * @brief Get ALARM B time format (AM or PM notation) - * @rmtoll ALRMBR PM LL_RTC_ALMB_GetTimeFormat - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM - * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTimeFormat(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_PM)); -} - -/** - * @brief Set ALARM B Hours in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format - * @rmtoll ALRMBR HT LL_RTC_ALMB_SetHour\n - * ALRMBR HU LL_RTC_ALMB_SetHour - * @param RTCx RTC Instance - * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) -{ - MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU), - (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos))); -} - -/** - * @brief Get ALARM B Hours in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format - * @rmtoll ALRMBR HT LL_RTC_ALMB_GetHour\n - * ALRMBR HU LL_RTC_ALMB_GetHour - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetHour(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU))) >> RTC_ALRMBR_HU_Pos); -} - -/** - * @brief Set ALARM B Minutes in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format - * @rmtoll ALRMBR MNT LL_RTC_ALMB_SetMinute\n - * ALRMBR MNU LL_RTC_ALMB_SetMinute - * @param RTCx RTC Instance - * @param Minutes between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) -{ - MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU), - (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos))); -} - -/** - * @brief Get ALARM B Minutes in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format - * @rmtoll ALRMBR MNT LL_RTC_ALMB_GetMinute\n - * ALRMBR MNU LL_RTC_ALMB_GetMinute - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMinute(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU))) >> RTC_ALRMBR_MNU_Pos); -} - -/** - * @brief Set ALARM B Seconds in BCD format - * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format - * @rmtoll ALRMBR ST LL_RTC_ALMB_SetSecond\n - * ALRMBR SU LL_RTC_ALMB_SetSecond - * @param RTCx RTC Instance - * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) -{ - MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU), - (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos))); -} - -/** - * @brief Get ALARM B Seconds in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format - * @rmtoll ALRMBR ST LL_RTC_ALMB_GetSecond\n - * ALRMBR SU LL_RTC_ALMB_GetSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU))) >> RTC_ALRMBR_SU_Pos); -} - -/** - * @brief Set Alarm B Time (hour, minute and second) in BCD format - * @rmtoll ALRMBR PM LL_RTC_ALMB_ConfigTime\n - * ALRMBR HT LL_RTC_ALMB_ConfigTime\n - * ALRMBR HU LL_RTC_ALMB_ConfigTime\n - * ALRMBR MNT LL_RTC_ALMB_ConfigTime\n - * ALRMBR MNU LL_RTC_ALMB_ConfigTime\n - * ALRMBR ST LL_RTC_ALMB_ConfigTime\n - * ALRMBR SU LL_RTC_ALMB_ConfigTime - * @param RTCx RTC Instance - * @param Format12_24 This parameter can be one of the following values: - * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM - * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM - * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 - * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) -{ - uint32_t temp; - - temp = Format12_24 | \ - (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos)) | \ - (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos)) | \ - (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos)); - - MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM | RTC_ALRMBR_HT | RTC_ALRMBR_HU | RTC_ALRMBR_MNT | RTC_ALRMBR_MNU | RTC_ALRMBR_ST | RTC_ALRMBR_SU, temp); -} - -/** - * @brief Get Alarm B Time (hour, minute and second) in BCD format - * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND - * are available to get independently each parameter. - * @rmtoll ALRMBR HT LL_RTC_ALMB_GetTime\n - * ALRMBR HU LL_RTC_ALMB_GetTime\n - * ALRMBR MNT LL_RTC_ALMB_GetTime\n - * ALRMBR MNU LL_RTC_ALMB_GetTime\n - * ALRMBR ST LL_RTC_ALMB_GetTime\n - * ALRMBR SU LL_RTC_ALMB_GetTime - * @param RTCx RTC Instance - * @retval Combination of hours, minutes and seconds. - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTime(RTC_TypeDef *RTCx) -{ - return (uint32_t)((LL_RTC_ALMB_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMB_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMB_GetSecond(RTCx)); -} - -/** - * @brief Mask the most-significant bits of the subseconds field starting from - * the bit specified in parameter Mask - * @note This register can be written only when ALRBE is reset in RTC_CR register, - * or in initialization mode. - * @rmtoll ALRMBSSR MASKSS LL_RTC_ALMB_SetSubSecondMask - * @param RTCx RTC Instance - * @param Mask Value between Min_Data=0x00 and Max_Data=0xF - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) -{ - MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS, Mask << RTC_ALRMBSSR_MASKSS_Pos); -} - -/** - * @brief Get Alarm B subseconds mask - * @rmtoll ALRMBSSR MASKSS LL_RTC_ALMB_GetSubSecondMask - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecondMask(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS) >> RTC_ALRMBSSR_MASKSS_Pos); -} - -/** - * @brief Set Alarm B subseconds value - * @rmtoll ALRMBSSR SS LL_RTC_ALMB_SetSubSecond - * @param RTCx RTC Instance - * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF - * @retval None - */ -__STATIC_INLINE void LL_RTC_ALMB_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) -{ - MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS, Subsecond); -} - -/** - * @brief Get Alarm B subseconds value - * @rmtoll ALRMBSSR SS LL_RTC_ALMB_GetSubSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF - */ -__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Timestamp Timestamp - * @{ - */ - -/** - * @brief Enable Timestamp - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR TSE LL_RTC_TS_Enable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_TSE); -} - -/** - * @brief Disable Timestamp - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR TSE LL_RTC_TS_Disable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_TSE); -} - -/** - * @brief Set Time-stamp event active edge - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting - * @rmtoll CR TSEDGE LL_RTC_TS_SetActiveEdge - * @param RTCx RTC Instance - * @param Edge This parameter can be one of the following values: - * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING - * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING - * @retval None - */ -__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) -{ - MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); -} - -/** - * @brief Get Time-stamp event active edge - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR TSEDGE LL_RTC_TS_GetActiveEdge - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING - * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); -} - -/** - * @brief Get Timestamp AM/PM notation (AM or 24-hour format) - * @rmtoll TSTR PM LL_RTC_TS_GetTimeFormat - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_TS_TIME_FORMAT_AM - * @arg @ref LL_RTC_TS_TIME_FORMAT_PM - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); -} - -/** - * @brief Get Timestamp Hours in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format - * @rmtoll TSTR HT LL_RTC_TS_GetHour\n - * TSTR HU LL_RTC_TS_GetHour - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos); -} - -/** - * @brief Get Timestamp Minutes in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format - * @rmtoll TSTR MNT LL_RTC_TS_GetMinute\n - * TSTR MNU LL_RTC_TS_GetMinute - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos); -} - -/** - * @brief Get Timestamp Seconds in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format - * @rmtoll TSTR ST LL_RTC_TS_GetSecond\n - * TSTR SU LL_RTC_TS_GetSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x59 - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); -} - -/** - * @brief Get Timestamp time (hour, minute and second) in BCD format - * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND - * are available to get independently each parameter. - * @rmtoll TSTR HT LL_RTC_TS_GetTime\n - * TSTR HU LL_RTC_TS_GetTime\n - * TSTR MNT LL_RTC_TS_GetTime\n - * TSTR MNU LL_RTC_TS_GetTime\n - * TSTR ST LL_RTC_TS_GetTime\n - * TSTR SU LL_RTC_TS_GetTime - * @param RTCx RTC Instance - * @retval Combination of hours, minutes and seconds. - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSTR, - RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); -} - -/** - * @brief Get Timestamp Week day - * @rmtoll TSDR WDU LL_RTC_TS_GetWeekDay - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_WEEKDAY_MONDAY - * @arg @ref LL_RTC_WEEKDAY_TUESDAY - * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY - * @arg @ref LL_RTC_WEEKDAY_THURSDAY - * @arg @ref LL_RTC_WEEKDAY_FRIDAY - * @arg @ref LL_RTC_WEEKDAY_SATURDAY - * @arg @ref LL_RTC_WEEKDAY_SUNDAY - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos); -} - -/** - * @brief Get Timestamp Month in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format - * @rmtoll TSDR MT LL_RTC_TS_GetMonth\n - * TSDR MU LL_RTC_TS_GetMonth - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_MONTH_JANUARY - * @arg @ref LL_RTC_MONTH_FEBRUARY - * @arg @ref LL_RTC_MONTH_MARCH - * @arg @ref LL_RTC_MONTH_APRIL - * @arg @ref LL_RTC_MONTH_MAY - * @arg @ref LL_RTC_MONTH_JUNE - * @arg @ref LL_RTC_MONTH_JULY - * @arg @ref LL_RTC_MONTH_AUGUST - * @arg @ref LL_RTC_MONTH_SEPTEMBER - * @arg @ref LL_RTC_MONTH_OCTOBER - * @arg @ref LL_RTC_MONTH_NOVEMBER - * @arg @ref LL_RTC_MONTH_DECEMBER - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos); -} - -/** - * @brief Get Timestamp Day in BCD format - * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format - * @rmtoll TSDR DT LL_RTC_TS_GetDay\n - * TSDR DU LL_RTC_TS_GetDay - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x01 and Max_Data=0x31 - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); -} - -/** - * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format - * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, - * and __LL_RTC_GET_DAY are available to get independently each parameter. - * @rmtoll TSDR WDU LL_RTC_TS_GetDate\n - * TSDR MT LL_RTC_TS_GetDate\n - * TSDR MU LL_RTC_TS_GetDate\n - * TSDR DT LL_RTC_TS_GetDate\n - * TSDR DU LL_RTC_TS_GetDate - * @param RTCx RTC Instance - * @retval Combination of Weekday, Day and Month - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); -} - -/** - * @brief Get time-stamp subseconds value - * @rmtoll TSSSR SS LL_RTC_TS_GetSubSecond - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); -} - -#if defined(RTC_TAFCR_TAMPTS) -/** - * @brief Activate timestamp on tamper detection event - * @rmtoll TAFCR TAMPTS LL_RTC_TS_EnableOnTamper - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPTS); -} - -/** - * @brief Disable timestamp on tamper detection event - * @rmtoll TAFCR TAMPTS LL_RTC_TS_DisableOnTamper - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPTS); -} -#endif /* RTC_TAFCR_TAMPTS */ - -/** - * @brief Set timestamp Pin - * @rmtoll TAFCR TSINSEL LL_RTC_TS_SetPin - * @param RTCx RTC Instance - * @param TSPin specifies the RTC Timestamp Pin. - * This parameter can be one of the following values: - * @arg LL_RTC_TimeStampPin_Default: RTC_AF1 is used as RTC Timestamp Pin. - * @arg LL_RTC_TimeStampPin_Pos1: RTC_AF2 is used as RTC Timestamp Pin. (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE void LL_RTC_TS_SetPin(RTC_TypeDef *RTCx, uint32_t TSPin) -{ - MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TSINSEL, TSPin); -} - -/** - * @brief Get timestamp Pin - * @rmtoll TAFCR TSINSEL LL_RTC_TS_GetPin - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg LL_RTC_TimeStampPin_Default: RTC_AF1 is used as RTC Timestamp Pin. - * @arg LL_RTC_TimeStampPin_Pos1: RTC_AF2 is used as RTC Timestamp Pin. (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE uint32_t LL_RTC_TS_GetPin(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TSINSEL)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Tamper Tamper - * @{ - */ - -/** - * @brief Enable RTC_TAMPx input detection - * @rmtoll TAFCR TAMP1E LL_RTC_TAMPER_Enable\n - * TAFCR TAMP2E LL_RTC_TAMPER_Enable\n - * @param RTCx RTC Instance - * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_1 - * @arg @ref LL_RTC_TAMPER_2 (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_Enable(RTC_TypeDef *RTCx, uint32_t Tamper) -{ - SET_BIT(RTCx->TAFCR, Tamper); -} - -/** - * @brief Clear RTC_TAMPx input detection - * @rmtoll TAFCR TAMP1E LL_RTC_TAMPER_Disable\n - * TAFCR TAMP2E LL_RTC_TAMPER_Disable\n - * @param RTCx RTC Instance - * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_1 - * @arg @ref LL_RTC_TAMPER_2 (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_Disable(RTC_TypeDef *RTCx, uint32_t Tamper) -{ - CLEAR_BIT(RTCx->TAFCR, Tamper); -} - -/** - * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins) - * @rmtoll TAFCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPUDIS); -} - -/** - * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling) - * @rmtoll TAFCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPUDIS); -} - -/** - * @brief Set RTC_TAMPx precharge duration - * @rmtoll TAFCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge - * @param RTCx RTC Instance - * @param Duration This parameter can be one of the following values: - * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK - * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK - * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK - * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(RTC_TypeDef *RTCx, uint32_t Duration) -{ - MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPPRCH, Duration); -} - -/** - * @brief Get RTC_TAMPx precharge duration - * @rmtoll TAFCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK - * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK - * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK - * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK - */ -__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPRCH)); -} - -/** - * @brief Set RTC_TAMPx filter count - * @rmtoll TAFCR TAMPFLT LL_RTC_TAMPER_SetFilterCount - * @param RTCx RTC Instance - * @param FilterCount This parameter can be one of the following values: - * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE - * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE - * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE - * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(RTC_TypeDef *RTCx, uint32_t FilterCount) -{ - MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPFLT, FilterCount); -} - -/** - * @brief Get RTC_TAMPx filter count - * @rmtoll TAFCR TAMPFLT LL_RTC_TAMPER_GetFilterCount - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE - * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE - * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE - * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE - */ -__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPFLT)); -} - -/** - * @brief Set Tamper sampling frequency - * @rmtoll TAFCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq - * @param RTCx RTC Instance - * @param SamplingFreq This parameter can be one of the following values: - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(RTC_TypeDef *RTCx, uint32_t SamplingFreq) -{ - MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPFREQ, SamplingFreq); -} - -/** - * @brief Get Tamper sampling frequency - * @rmtoll TAFCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 - * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 - */ -__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPFREQ)); -} - -/** - * @brief Enable Active level for Tamper input - * @rmtoll TAFCR TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n - * TAFCR TAMP2TRG LL_RTC_TAMPER_EnableActiveLevel\n - * @param RTCx RTC Instance - * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 - * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper) -{ - SET_BIT(RTCx->TAFCR, Tamper); -} - -/** - * @brief Disable Active level for Tamper input - * @rmtoll TAFCR TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n - * TAFCR TAMP2TRG LL_RTC_TAMPER_DisableActiveLevel\n - * @param RTCx RTC Instance - * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 - * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper) -{ - CLEAR_BIT(RTCx->TAFCR, Tamper); -} - -/** - * @brief Set Tamper Pin - * @rmtoll TAFCR TAMP1INSEL LL_RTC_TAMPER_SetPin - * @param RTCx RTC Instance - * @param TamperPin specifies the RTC Tamper Pin. - * This parameter can be one of the following values: - * @arg LL_RTC_TamperPin_Default: RTC_AF1 is used as RTC Tamper Pin. - * @arg LL_RTC_TamperPin_Pos1: RTC_AF2 is used as RTC Tamper Pin. (*) - * - * (*) value not applicable to all devices. - * @retval None - */ -__STATIC_INLINE void LL_RTC_TAMPER_SetPin(RTC_TypeDef *RTCx, uint32_t TamperPin) -{ - MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMP1INSEL, TamperPin); -} - -/** - * @brief Get Tamper Pin - * @rmtoll TAFCR TAMP1INSEL LL_RTC_TAMPER_GetPin - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg LL_RTC_TamperPin_Default: RTC_AF1 is used as RTC Tamper Pin. - * @arg LL_RTC_TamperPin_Pos1: RTC_AF2 is selected as RTC Tamper Pin. (*) - * - * (*) value not applicable to all devices. - * @retval None - */ - -__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPin(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMP1INSEL)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Wakeup Wakeup - * @{ - */ - -/** - * @brief Enable Wakeup timer - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR WUTE LL_RTC_WAKEUP_Enable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_WUTE); -} - -/** - * @brief Disable Wakeup timer - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR WUTE LL_RTC_WAKEUP_Disable - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_WUTE); -} - -/** - * @brief Check if Wakeup timer is enabled or not - * @rmtoll CR WUTE LL_RTC_WAKEUP_IsEnabled - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE)) ? 1UL : 0UL); -} - -/** - * @brief Select Wakeup clock - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note Bit can be written only when RTC_CR WUTE bit = 0 and RTC_ISR WUTWF bit = 1 - * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_SetClock - * @param RTCx RTC Instance - * @param WakeupClock This parameter can be one of the following values: - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 - * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE - * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT - * @retval None - */ -__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock) -{ - MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock); -} - -/** - * @brief Get Wakeup clock - * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_GetClock - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 - * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 - * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE - * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT - */ -__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL)); -} - -/** - * @brief Set Wakeup auto-reload value - * @note Bit can be written only when WUTWF is set to 1 in RTC_ISR - * @rmtoll WUTR WUT LL_RTC_WAKEUP_SetAutoReload - * @param RTCx RTC Instance - * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF - * @retval None - */ -__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value) -{ - MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value); -} - -/** - * @brief Get Wakeup auto-reload value - * @rmtoll WUTR WUT LL_RTC_WAKEUP_GetAutoReload - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers - * @{ - */ - -/** - * @brief Writes a data in a specified RTC Backup data register. - * @rmtoll BKPxR BKP LL_RTC_BAK_SetRegister - * @param RTCx RTC Instance - * @param BackupRegister This parameter can be one of the following values: - * @arg @ref LL_RTC_BKP_DR0 - * @arg @ref LL_RTC_BKP_DR1 - * @arg @ref LL_RTC_BKP_DR2 - * @arg @ref LL_RTC_BKP_DR3 - * @arg @ref LL_RTC_BKP_DR4 - * @arg @ref LL_RTC_BKP_DR5 - * @arg @ref LL_RTC_BKP_DR6 - * @arg @ref LL_RTC_BKP_DR7 - * @arg @ref LL_RTC_BKP_DR8 - * @arg @ref LL_RTC_BKP_DR9 - * @arg @ref LL_RTC_BKP_DR10 - * @arg @ref LL_RTC_BKP_DR11 - * @arg @ref LL_RTC_BKP_DR12 - * @arg @ref LL_RTC_BKP_DR13 - * @arg @ref LL_RTC_BKP_DR14 - * @arg @ref LL_RTC_BKP_DR15 - * @arg @ref LL_RTC_BKP_DR16 - * @arg @ref LL_RTC_BKP_DR17 - * @arg @ref LL_RTC_BKP_DR18 - * @arg @ref LL_RTC_BKP_DR19 - * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_RTC_BAK_SetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister, uint32_t Data) -{ - uint32_t temp; - - temp = (uint32_t)(&(RTCx->BKP0R)); - temp += (BackupRegister * 4U); - - /* Write the specified register */ - *(__IO uint32_t *)temp = (uint32_t)Data; -} - -/** - * @brief Reads data from the specified RTC Backup data Register. - * @rmtoll BKPxR BKP LL_RTC_BAK_GetRegister - * @param RTCx RTC Instance - * @param BackupRegister This parameter can be one of the following values: - * @arg @ref LL_RTC_BKP_DR0 - * @arg @ref LL_RTC_BKP_DR1 - * @arg @ref LL_RTC_BKP_DR2 - * @arg @ref LL_RTC_BKP_DR3 - * @arg @ref LL_RTC_BKP_DR4 - * @arg @ref LL_RTC_BKP_DR5 - * @arg @ref LL_RTC_BKP_DR6 - * @arg @ref LL_RTC_BKP_DR7 - * @arg @ref LL_RTC_BKP_DR8 - * @arg @ref LL_RTC_BKP_DR9 - * @arg @ref LL_RTC_BKP_DR10 - * @arg @ref LL_RTC_BKP_DR11 - * @arg @ref LL_RTC_BKP_DR12 - * @arg @ref LL_RTC_BKP_DR13 - * @arg @ref LL_RTC_BKP_DR14 - * @arg @ref LL_RTC_BKP_DR15 - * @arg @ref LL_RTC_BKP_DR16 - * @arg @ref LL_RTC_BKP_DR17 - * @arg @ref LL_RTC_BKP_DR18 - * @arg @ref LL_RTC_BKP_DR19 - * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_RTC_BAK_GetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister) -{ - uint32_t temp; - - temp = (uint32_t)(&(RTCx->BKP0R)); - temp += (BackupRegister * 4U); - - /* Read the specified register */ - return (*(__IO uint32_t *)temp); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_Calibration Calibration - * @{ - */ - -/** - * @brief Set Calibration output frequency (1 Hz or 512 Hz) - * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR COE LL_RTC_CAL_SetOutputFreq\n - * CR COSEL LL_RTC_CAL_SetOutputFreq - * @param RTCx RTC Instance - * @param Frequency This parameter can be one of the following values: - * @arg @ref LL_RTC_CALIB_OUTPUT_NONE - * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ - * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ - * - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) -{ - MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); -} - -/** - * @brief Get Calibration output frequency (1 Hz or 512 Hz) - * @rmtoll CR COE LL_RTC_CAL_GetOutputFreq\n - * CR COSEL LL_RTC_CAL_GetOutputFreq - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_CALIB_OUTPUT_NONE - * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ - * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ - * - */ -__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); -} - -/** - * @brief Enable Coarse digital calibration - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll CR DCE LL_RTC_CAL_EnableCoarseDigital - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_EnableCoarseDigital(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_DCE); -} - -/** - * @brief Disable Coarse digital calibration - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll CR DCE LL_RTC_CAL_DisableCoarseDigital - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_DisableCoarseDigital(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_DCE); -} - -/** - * @brief Set the coarse digital calibration - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) - * @rmtoll CALIBR DCS LL_RTC_CAL_ConfigCoarseDigital\n - * CALIBR DC LL_RTC_CAL_ConfigCoarseDigital - * @param RTCx RTC Instance - * @param Sign This parameter can be one of the following values: - * @arg @ref LL_RTC_CALIB_SIGN_POSITIVE - * @arg @ref LL_RTC_CALIB_SIGN_NEGATIVE - * @param Value value of coarse calibration expressed in ppm (coded on 5 bits) - * @note This Calibration value should be between 0 and 63 when using negative sign with a 2-ppm step. - * @note This Calibration value should be between 0 and 126 when using positive sign with a 4-ppm step. - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_ConfigCoarseDigital(RTC_TypeDef *RTCx, uint32_t Sign, uint32_t Value) -{ - MODIFY_REG(RTCx->CALIBR, RTC_CALIBR_DCS | RTC_CALIBR_DC, Sign | Value); -} - -/** - * @brief Get the coarse digital calibration value - * @rmtoll CALIBR DC LL_RTC_CAL_GetCoarseDigitalValue - * @param RTCx RTC Instance - * @retval value of coarse calibration expressed in ppm (coded on 5 bits) - */ -__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigitalValue(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CALIBR, RTC_CALIBR_DC)); -} - -/** - * @brief Get the coarse digital calibration sign - * @rmtoll CALIBR DCS LL_RTC_CAL_GetCoarseDigitalSign - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_CALIB_SIGN_POSITIVE - * @arg @ref LL_RTC_CALIB_SIGN_NEGATIVE - */ -__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigitalSign(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CALIBR, RTC_CALIBR_DCS)); -} - -/** - * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR - * @rmtoll CALR CALP LL_RTC_CAL_SetPulse - * @param RTCx RTC Instance - * @param Pulse This parameter can be one of the following values: - * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE - * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) -{ - MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); -} - -/** - * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) - * @rmtoll CALR CALP LL_RTC_CAL_IsPulseInserted - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)) ? 1UL : 0UL); -} - -/** - * @brief Set smooth calibration cycle period - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR - * @rmtoll CALR CALW8 LL_RTC_CAL_SetPeriod\n - * CALR CALW16 LL_RTC_CAL_SetPeriod - * @param RTCx RTC Instance - * @param Period This parameter can be one of the following values: - * @arg @ref LL_RTC_CALIB_PERIOD_32SEC - * @arg @ref LL_RTC_CALIB_PERIOD_16SEC - * @arg @ref LL_RTC_CALIB_PERIOD_8SEC - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) -{ - MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); -} - -/** - * @brief Get smooth calibration cycle period - * @rmtoll CALR CALW8 LL_RTC_CAL_GetPeriod\n - * CALR CALW16 LL_RTC_CAL_GetPeriod - * @param RTCx RTC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_RTC_CALIB_PERIOD_32SEC - * @arg @ref LL_RTC_CALIB_PERIOD_16SEC - * @arg @ref LL_RTC_CALIB_PERIOD_8SEC - */ -__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); -} - -/** - * @brief Set smooth Calibration minus - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR - * @rmtoll CALR CALM LL_RTC_CAL_SetMinus - * @param RTCx RTC Instance - * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF - * @retval None - */ -__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) -{ - MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); -} - -/** - * @brief Get smooth Calibration minus - * @rmtoll CALR CALM LL_RTC_CAL_GetMinus - * @param RTCx RTC Instance - * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF - */ -__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx) -{ - return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Recalibration pending Flag - * @rmtoll ISR RECALPF LL_RTC_IsActiveFlag_RECALP - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_RECALPF) == (RTC_ISR_RECALPF)) ? 1UL : 0UL); -} - -#if defined(RTC_TAMPER2_SUPPORT) -/** - * @brief Get RTC_TAMP2 detection flag - * @rmtoll ISR TAMP2F LL_RTC_IsActiveFlag_TAMP2 - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_TAMP2F) == (RTC_ISR_TAMP2F)) ? 1UL : 0UL); -} -#endif /* RTC_TAMPER2_SUPPORT */ - -/** - * @brief Get RTC_TAMP1 detection flag - * @rmtoll ISR TAMP1F LL_RTC_IsActiveFlag_TAMP1 - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_TAMP1F) == (RTC_ISR_TAMP1F)) ? 1UL : 0UL); -} - -/** - * @brief Get Time-stamp overflow flag - * @rmtoll ISR TSOVF LL_RTC_IsActiveFlag_TSOV - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_TSOVF) == (RTC_ISR_TSOVF)) ? 1UL : 0UL); -} - -/** - * @brief Get Time-stamp flag - * @rmtoll ISR TSF LL_RTC_IsActiveFlag_TS - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_TSF) == (RTC_ISR_TSF)) ? 1UL : 0UL); -} - -/** - * @brief Get Wakeup timer flag - * @rmtoll ISR WUTF LL_RTC_IsActiveFlag_WUT - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_WUTF) == (RTC_ISR_WUTF)) ? 1UL : 0UL); -} - -/** - * @brief Get Alarm B flag - * @rmtoll ISR ALRBF LL_RTC_IsActiveFlag_ALRB - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRB(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_ALRBF) == (RTC_ISR_ALRBF)) ? 1UL : 0UL); -} - -/** - * @brief Get Alarm A flag - * @rmtoll ISR ALRAF LL_RTC_IsActiveFlag_ALRA - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_ALRAF) == (RTC_ISR_ALRAF)) ? 1UL : 0UL); -} - -#if defined(RTC_TAMPER2_SUPPORT) -/** - * @brief Clear RTC_TAMP2 detection flag - * @rmtoll ISR TAMP2F LL_RTC_ClearFlag_TAMP2 - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_TAMP2(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP2F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} -#endif /* RTC_TAMPER2_SUPPORT */ - -/** - * @brief Clear RTC_TAMP1 detection flag - * @rmtoll ISR TAMP1F LL_RTC_ClearFlag_TAMP1 - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP1F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Clear Time-stamp overflow flag - * @rmtoll ISR TSOVF LL_RTC_ClearFlag_TSOV - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSOVF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Clear Time-stamp flag - * @rmtoll ISR TSF LL_RTC_ClearFlag_TS - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Clear Wakeup timer flag - * @rmtoll ISR WUTF LL_RTC_ClearFlag_WUT - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_WUTF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Clear Alarm B flag - * @rmtoll ISR ALRBF LL_RTC_ClearFlag_ALRB - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_ALRB(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_ALRBF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Clear Alarm A flag - * @rmtoll ISR ALRAF LL_RTC_ClearFlag_ALRA - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_ALRAF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Get Initialization flag - * @rmtoll ISR INITF LL_RTC_IsActiveFlag_INIT - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_INITF) == (RTC_ISR_INITF)) ? 1UL : 0UL); -} - -/** - * @brief Get Registers synchronization flag - * @rmtoll ISR RSF LL_RTC_IsActiveFlag_RS - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_RSF) == (RTC_ISR_RSF)) ? 1UL : 0UL); -} - -/** - * @brief Clear Registers synchronization flag - * @rmtoll ISR RSF LL_RTC_ClearFlag_RS - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) -{ - WRITE_REG(RTCx->ISR, (~((RTC_ISR_RSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Get Initialization status flag - * @rmtoll ISR INITS LL_RTC_IsActiveFlag_INITS - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_INITS) == (RTC_ISR_INITS)) ? 1UL : 0UL); -} - -/** - * @brief Get Shift operation pending flag - * @rmtoll ISR SHPF LL_RTC_IsActiveFlag_SHP - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_SHPF) == (RTC_ISR_SHPF)) ? 1UL : 0UL); -} - -/** - * @brief Get Wakeup timer write flag - * @rmtoll ISR WUTWF LL_RTC_IsActiveFlag_WUTW - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_WUTWF) == (RTC_ISR_WUTWF)) ? 1UL : 0UL); -} - -/** - * @brief Get Alarm B write flag - * @rmtoll ISR ALRBWF LL_RTC_IsActiveFlag_ALRBW - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBW(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_ALRBWF) == (RTC_ISR_ALRBWF)) ? 1UL : 0UL); -} - -/** - * @brief Get Alarm A write flag - * @rmtoll ISR ALRAWF LL_RTC_IsActiveFlag_ALRAW - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->ISR, RTC_ISR_ALRAWF) == (RTC_ISR_ALRAWF)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup RTC_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable Time-stamp interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR TSIE LL_RTC_EnableIT_TS - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_TSIE); -} - -/** - * @brief Disable Time-stamp interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR TSIE LL_RTC_DisableIT_TS - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); -} - -/** - * @brief Enable Wakeup timer interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR WUTIE LL_RTC_EnableIT_WUT - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_WUTIE); -} - -/** - * @brief Disable Wakeup timer interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR WUTIE LL_RTC_DisableIT_WUT - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE); -} - -/** - * @brief Enable Alarm B interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRBIE LL_RTC_EnableIT_ALRB - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableIT_ALRB(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_ALRBIE); -} - -/** - * @brief Disable Alarm B interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRBIE LL_RTC_DisableIT_ALRB - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableIT_ALRB(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_ALRBIE); -} - -/** - * @brief Enable Alarm A interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRAIE LL_RTC_EnableIT_ALRA - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->CR, RTC_CR_ALRAIE); -} - -/** - * @brief Disable Alarm A interrupt - * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. - * @rmtoll CR ALRAIE LL_RTC_DisableIT_ALRA - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); -} - -/** - * @brief Enable all Tamper Interrupt - * @rmtoll TAFCR TAMPIE LL_RTC_EnableIT_TAMP - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_EnableIT_TAMP(RTC_TypeDef *RTCx) -{ - SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPIE); -} - -/** - * @brief Disable all Tamper Interrupt - * @rmtoll TAFCR TAMPIE LL_RTC_DisableIT_TAMP - * @param RTCx RTC Instance - * @retval None - */ -__STATIC_INLINE void LL_RTC_DisableIT_TAMP(RTC_TypeDef *RTCx) -{ - CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPIE); -} - -/** - * @brief Check if Time-stamp interrupt is enabled or not - * @rmtoll CR TSIE LL_RTC_IsEnabledIT_TS - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if Wakeup timer interrupt is enabled or not - * @rmtoll CR WUTIE LL_RTC_IsEnabledIT_WUT - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if Alarm B interrupt is enabled or not - * @rmtoll CR ALRBIE LL_RTC_IsEnabledIT_ALRB - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRB(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_ALRBIE) == (RTC_CR_ALRBIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if Alarm A interrupt is enabled or not - * @rmtoll CR ALRAIE LL_RTC_IsEnabledIT_ALRA - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)) ? 1UL : 0UL); -} - -/** - * @brief Check if all the TAMPER interrupts are enabled or not - * @rmtoll TAFCR TAMPIE LL_RTC_IsEnabledIT_TAMP - * @param RTCx RTC Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP(RTC_TypeDef *RTCx) -{ - return ((READ_BIT(RTCx->TAFCR, - RTC_TAFCR_TAMPIE) == (RTC_TAFCR_TAMPIE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); -ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); -void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); -ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); -void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); -ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); -void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); -ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); -ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); -void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); -void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); -ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); -ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); -ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RTC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_LL_RTC_H */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h deleted file mode 100644 index 84ea5c4..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h +++ /dev/null @@ -1,1711 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_system.h - * @author MCD Application Team - * @brief Header file of SYSTEM LL module. - * - ****************************************************************************** - * @attention - * - *Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL SYSTEM driver contains a set of generic APIs that can be - used by user: - (+) Some of the FLASH features need to be handled in the SYSTEM file. - (+) Access to DBGCMU registers - (+) Access to SYSCFG registers - - @endverbatim - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_SYSTEM_H -#define __STM32F4xx_LL_SYSTEM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) - -/** @defgroup SYSTEM_LL SYSTEM - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants - * @{ - */ - -/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP -* @{ -*/ -#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000 /*!< Main Flash memory mapped at 0x00000000 */ -#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ -#if defined(FSMC_Bank1) -#define LL_SYSCFG_REMAP_FSMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FSMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ -#endif /* FSMC_Bank1 */ -#if defined(FMC_Bank1) -#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ -#define LL_SYSCFG_REMAP_SDRAM SYSCFG_MEMRMP_MEM_MODE_2 /*!< FMC/SDRAM mapped at 0x00000000 */ -#endif /* FMC_Bank1 */ -#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */ - -/** - * @} - */ - -#if defined(SYSCFG_PMC_MII_RMII_SEL) - /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC -* @{ -*/ -#define LL_SYSCFG_PMC_ETHMII (uint32_t)0x00000000 /*!< ETH Media MII interface */ -#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */ - -/** - * @} - */ -#endif /* SYSCFG_PMC_MII_RMII_SEL */ - - - -#if defined(SYSCFG_MEMRMP_UFB_MODE) -/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE - * @{ - */ -#define LL_SYSCFG_BANKMODE_BANK1 (uint32_t)0x00000000 /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM) - and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/ -#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_UFB_MODE /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM) - and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */ -/** - * @} - */ -#endif /* SYSCFG_MEMRMP_UFB_MODE */ -/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS - * @{ - */ -#if defined(SYSCFG_CFGR_FMPI2C1_SCL) -#define LL_SYSCFG_I2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C_SCL pin */ -#define LL_SYSCFG_I2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C_SDA pin*/ -#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT - * @{ - */ -#define LL_SYSCFG_EXTI_PORTA (uint32_t)0 /*!< EXTI PORT A */ -#define LL_SYSCFG_EXTI_PORTB (uint32_t)1 /*!< EXTI PORT B */ -#define LL_SYSCFG_EXTI_PORTC (uint32_t)2 /*!< EXTI PORT C */ -#define LL_SYSCFG_EXTI_PORTD (uint32_t)3 /*!< EXTI PORT D */ -#define LL_SYSCFG_EXTI_PORTE (uint32_t)4 /*!< EXTI PORT E */ -#if defined(GPIOF) -#define LL_SYSCFG_EXTI_PORTF (uint32_t)5 /*!< EXTI PORT F */ -#endif /* GPIOF */ -#if defined(GPIOG) -#define LL_SYSCFG_EXTI_PORTG (uint32_t)6 /*!< EXTI PORT G */ -#endif /* GPIOG */ -#define LL_SYSCFG_EXTI_PORTH (uint32_t)7 /*!< EXTI PORT H */ -#if defined(GPIOI) -#define LL_SYSCFG_EXTI_PORTI (uint32_t)8 /*!< EXTI PORT I */ -#endif /* GPIOI */ -#if defined(GPIOJ) -#define LL_SYSCFG_EXTI_PORTJ (uint32_t)9 /*!< EXTI PORT J */ -#endif /* GPIOJ */ -#if defined(GPIOK) -#define LL_SYSCFG_EXTI_PORTK (uint32_t)10 /*!< EXTI PORT k */ -#endif /* GPIOK */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE - * @{ - */ -#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0x000FU << 16 | 0) /*!< EXTI_POSITION_0 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(0x00F0U << 16 | 0) /*!< EXTI_POSITION_4 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(0x0F00U << 16 | 0) /*!< EXTI_POSITION_8 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(0xF000U << 16 | 0) /*!< EXTI_POSITION_12 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0x000FU << 16 | 1) /*!< EXTI_POSITION_0 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(0x00F0U << 16 | 1) /*!< EXTI_POSITION_4 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(0x0F00U << 16 | 1) /*!< EXTI_POSITION_8 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(0xF000U << 16 | 1) /*!< EXTI_POSITION_12 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0x000FU << 16 | 2) /*!< EXTI_POSITION_0 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(0x00F0U << 16 | 2) /*!< EXTI_POSITION_4 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(0x0F00U << 16 | 2) /*!< EXTI_POSITION_8 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(0xF000U << 16 | 2) /*!< EXTI_POSITION_12 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0x000FU << 16 | 3) /*!< EXTI_POSITION_0 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(0x00F0U << 16 | 3) /*!< EXTI_POSITION_4 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(0x0F00U << 16 | 3) /*!< EXTI_POSITION_8 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(0xF000U << 16 | 3) /*!< EXTI_POSITION_12 | EXTICR[3] */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK - * @{ - */ -#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) -#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_LOCKUP_LOCK /*!< Enables and locks the LOCKUP output of CortexM4 - with Break Input of TIM1/8 */ -#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Enables and locks the PVD connection with TIM1/8 Break Input - and also the PVDE and PLS bits of the Power Control Interface */ -#endif /* SYSCFG_CFGR2_CLL */ -/** - * @} - */ - -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** @defgroup SYSTEM_LL_DFSDM_BitStream_ClockSource SYSCFG MCHDLY BCKKSEL - * @{ - */ -#define LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 (uint32_t)0x00000000 -#define LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 SYSCFG_MCHDLYCR_BSCKSEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_MCHDLYEN SYSCFG MCHDLY MCHDLYEN - * @{ - */ -#define LL_SYSCFG_DFSDM1_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY1EN -#define LL_SYSCFG_DFSDM2_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY2EN -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_DataIn0_Source SYSCFG MCHDLY DFSDMD0SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_DataIn0 SYSCFG_MCHDLYCR_DFSDM1D0SEL -#define LL_SYSCFG_DFSDM2_DataIn0 SYSCFG_MCHDLYCR_DFSDM2D0SEL - -#define LL_SYSCFG_DFSDM1_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM1_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D0SEL) -#define LL_SYSCFG_DFSDM2_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM2_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D0SEL) -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_DataIn2_Source SYSCFG MCHDLY DFSDMD2SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_DataIn2 SYSCFG_MCHDLYCR_DFSDM1D2SEL -#define LL_SYSCFG_DFSDM2_DataIn2 SYSCFG_MCHDLYCR_DFSDM2D2SEL - -#define LL_SYSCFG_DFSDM1_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM1_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D2SEL) -#define LL_SYSCFG_DFSDM2_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM2_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D2SEL) -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK02SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 SYSCFG_MCHDLYCR_DFSDM1CK02SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK13SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 SYSCFG_MCHDLYCR_DFSDM1CK13SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_CLKIN_SourceSelection SYSCFG MCHDLY DFSDMCFG - * @{ - */ -#define LL_SYSCFG_DFSDM1_CKIN_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_CKIN_DM SYSCFG_MCHDLYCR_DFSDM1CFG -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM1CKOSEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_CKOUT (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM1CKOSEL -/** - * @} - */ - -/** @defgroup SYSTEM_LL_DFSDM2_DataIn4_SourceSelection SYSCFG MCHDLY DFSDM2D4SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_DataIn4_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_DataIn4_DM SYSCFG_MCHDLYCR_DFSDM2D4SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_DataIn6_SourceSelection SYSCFG MCHDLY DFSDM2D6SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_DataIn6_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_DataIn6_DM SYSCFG_MCHDLYCR_DFSDM2D6SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC4_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK04SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 SYSCFG_MCHDLYCR_DFSDM2CK04SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC3_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK15SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 SYSCFG_MCHDLYCR_DFSDM2CK15SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK26SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 SYSCFG_MCHDLYCR_DFSDM2CK26SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK37SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 SYSCFG_MCHDLYCR_DFSDM2CK37SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_CLKIN_SourceSelection SYSCFG MCHDLY DFSDM2CFG - * @{ - */ -#define LL_SYSCFG_DFSDM2_CKIN_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_CKIN_DM SYSCFG_MCHDLYCR_DFSDM2CFG -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM2CKOSEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_CKOUT (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM2CKOSEL -/** - * @} - */ -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ - -/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment - * @{ - */ -#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ -#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP - * @{ - */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */ -#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_LPTIM_STOP) -#define LL_DBGMCU_APB1_GRP1_LPTIM_STOP DBGMCU_APB1_FZ_DBG_LPTIM_STOP /*!< LPTIM counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_LPTIM_STOP */ -#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */ -#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ -#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT) -#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */ -#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT) -#define LL_DBGMCU_APB1_GRP1_I2C4_STOP DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN1_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN1_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN3_STOP DBGMCU_APB1_FZ_DBG_CAN3_STOP /*!< CAN3 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN3_STOP */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP - * @{ - */ -#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ -#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP) -#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */ -#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */ -#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */ -#if defined(DBGMCU_APB2_FZ_DBG_TIM10_STOP) -#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */ -#endif /* DBGMCU_APB2_FZ_DBG_TIM10_STOP */ -#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY - * @{ - */ -#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ -#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ -#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ -#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ -#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ -#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ -#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ -#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ -#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */ -#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */ -#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */ -#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */ -#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */ -#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */ -#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */ -#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions - * @{ - */ - -/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG - * @{ - */ -/** - * @brief Set memory mapping at address 0x00000000 - * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory - * @param Memory This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_REMAP_FLASH - * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH - * @arg @ref LL_SYSCFG_REMAP_SRAM - * @arg @ref LL_SYSCFG_REMAP_FSMC (*) - * @arg @ref LL_SYSCFG_REMAP_FMC (*) - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) -{ - MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory); -} - -/** - * @brief Get memory mapping at address 0x00000000 - * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_REMAP_FLASH - * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH - * @arg @ref LL_SYSCFG_REMAP_SRAM - * @arg @ref LL_SYSCFG_REMAP_FSMC (*) - * @arg @ref LL_SYSCFG_REMAP_FMC (*) - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)); -} - -#if defined(SYSCFG_MEMRMP_SWP_FMC) -/** - * @brief Enables the FMC Memory Mapping Swapping - * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_EnableFMCMemorySwapping - * @note SDRAM is accessible at 0x60000000 and NOR/RAM - * is accessible at 0xC0000000 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void) -{ - SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0); -} - -/** - * @brief Disables the FMC Memory Mapping Swapping - * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_DisableFMCMemorySwapping - * @note SDRAM is accessible at 0xC0000000 (default mapping) - * and NOR/RAM is accessible at 0x60000000 (default mapping) - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void) -{ - CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC); -} - -#endif /* SYSCFG_MEMRMP_SWP_FMC */ -/** - * @brief Enables the Compensation cell Power Down - * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void) -{ - SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Disables the Compensation cell Power Down - * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void) -{ - CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Get Compensation Cell ready Flag - * @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void) -{ - return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY)); -} - -#if defined(SYSCFG_PMC_MII_RMII_SEL) -/** - * @brief Select Ethernet PHY interface - * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface - * @param Interface This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_PMC_ETHMII - * @arg @ref LL_SYSCFG_PMC_ETHRMII - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface) -{ - MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface); -} - -/** - * @brief Get Ethernet PHY interface - * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_PMC_ETHMII - * @arg @ref LL_SYSCFG_PMC_ETHRMII - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL)); -} -#endif /* SYSCFG_PMC_MII_RMII_SEL */ - - - -#if defined(SYSCFG_MEMRMP_UFB_MODE) -/** - * @brief Select Flash bank mode (Bank flashed at 0x08000000) - * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_SetFlashBankMode - * @param Bank This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_BANKMODE_BANK1 - * @arg @ref LL_SYSCFG_BANKMODE_BANK2 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank) -{ - MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE, Bank); -} - -/** - * @brief Get Flash bank mode (Bank flashed at 0x08000000) - * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_GetFlashBankMode - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_BANKMODE_BANK1 - * @arg @ref LL_SYSCFG_BANKMODE_BANK2 - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE)); -} -#endif /* SYSCFG_MEMRMP_UFB_MODE */ - -#if defined(SYSCFG_CFGR_FMPI2C1_SCL) -/** - * @brief Enable the I2C fast mode plus driving capability. - * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_EnableFastModePlus\n - * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_EnableFastModePlus - * @param ConfigFastModePlus This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - SET_BIT(SYSCFG->CFGR, ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_DisableFastModePlus\n - * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_DisableFastModePlus\n - * @param ConfigFastModePlus This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - CLEAR_BIT(SYSCFG->CFGR, ConfigFastModePlus); -} -#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ - -/** - * @brief Configure source input for the EXTI external interrupt. - * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource - * @param Port This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_PORTA - * @arg @ref LL_SYSCFG_EXTI_PORTB - * @arg @ref LL_SYSCFG_EXTI_PORTC - * @arg @ref LL_SYSCFG_EXTI_PORTD - * @arg @ref LL_SYSCFG_EXTI_PORTE - * @arg @ref LL_SYSCFG_EXTI_PORTF (*) - * @arg @ref LL_SYSCFG_EXTI_PORTG (*) - * @arg @ref LL_SYSCFG_EXTI_PORTH - * - * (*) value not defined in all devices - * @param Line This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_LINE0 - * @arg @ref LL_SYSCFG_EXTI_LINE1 - * @arg @ref LL_SYSCFG_EXTI_LINE2 - * @arg @ref LL_SYSCFG_EXTI_LINE3 - * @arg @ref LL_SYSCFG_EXTI_LINE4 - * @arg @ref LL_SYSCFG_EXTI_LINE5 - * @arg @ref LL_SYSCFG_EXTI_LINE6 - * @arg @ref LL_SYSCFG_EXTI_LINE7 - * @arg @ref LL_SYSCFG_EXTI_LINE8 - * @arg @ref LL_SYSCFG_EXTI_LINE9 - * @arg @ref LL_SYSCFG_EXTI_LINE10 - * @arg @ref LL_SYSCFG_EXTI_LINE11 - * @arg @ref LL_SYSCFG_EXTI_LINE12 - * @arg @ref LL_SYSCFG_EXTI_LINE13 - * @arg @ref LL_SYSCFG_EXTI_LINE14 - * @arg @ref LL_SYSCFG_EXTI_LINE15 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) -{ - MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16))); -} - -/** - * @brief Get the configured defined for specific EXTI Line - * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource - * @param Line This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_LINE0 - * @arg @ref LL_SYSCFG_EXTI_LINE1 - * @arg @ref LL_SYSCFG_EXTI_LINE2 - * @arg @ref LL_SYSCFG_EXTI_LINE3 - * @arg @ref LL_SYSCFG_EXTI_LINE4 - * @arg @ref LL_SYSCFG_EXTI_LINE5 - * @arg @ref LL_SYSCFG_EXTI_LINE6 - * @arg @ref LL_SYSCFG_EXTI_LINE7 - * @arg @ref LL_SYSCFG_EXTI_LINE8 - * @arg @ref LL_SYSCFG_EXTI_LINE9 - * @arg @ref LL_SYSCFG_EXTI_LINE10 - * @arg @ref LL_SYSCFG_EXTI_LINE11 - * @arg @ref LL_SYSCFG_EXTI_LINE12 - * @arg @ref LL_SYSCFG_EXTI_LINE13 - * @arg @ref LL_SYSCFG_EXTI_LINE14 - * @arg @ref LL_SYSCFG_EXTI_LINE15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_PORTA - * @arg @ref LL_SYSCFG_EXTI_PORTB - * @arg @ref LL_SYSCFG_EXTI_PORTC - * @arg @ref LL_SYSCFG_EXTI_PORTD - * @arg @ref LL_SYSCFG_EXTI_PORTE - * @arg @ref LL_SYSCFG_EXTI_PORTF (*) - * @arg @ref LL_SYSCFG_EXTI_PORTG (*) - * @arg @ref LL_SYSCFG_EXTI_PORTH - * (*) value not defined in all devices - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) -{ - return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16)); -} - -#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) -/** - * @brief Set connections to TIM1/8 break inputs - * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n - * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs - * @param Break This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP - * @arg @ref LL_SYSCFG_TIMBREAK_PVD - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) -{ - MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break); -} - -/** - * @brief Get connections to TIM1/8 Break inputs - * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n - * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs - * @retval Returned value can be can be a combination of the following values: - * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP - * @arg @ref LL_SYSCFG_TIMBREAK_PVD - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK)); -} -#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */ -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** - * @brief Select the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. - * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL, ClockSource); -} -/** - * @brief Get the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. - * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL)); -} -/** - * @brief Enables the DFSDM1 or DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLYEN LL_SYSCFG_DFSDM_EnableDelayClock - * @param MCHDLY This parameter can be one of the following values - * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN - * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_EnableDelayClock(uint32_t MCHDLY) -{ - SET_BIT(SYSCFG->MCHDLYCR, MCHDLY); -} - -/** - * @brief Disables the DFSDM1 or the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY1EN LL_SYSCFG_DFSDM1_DisableDelayClock - * @param MCHDLY This parameter can be one of the following values - * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN - * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_DisableDelayClock(uint32_t MCHDLY) -{ - CLEAR_BIT(SYSCFG->MCHDLYCR, MCHDLY); -} - -/** - * @brief Select the source for DFSDM1 or DFSDM2 DatIn0 - * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_SetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn0Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); -} -/** - * @brief Get the source for DFSDM1 or DFSDM2 DatIn0. - * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_GetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0 - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn0Source(uint32_t Source) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); -} -/** - * @brief Select the source for DFSDM1 or DFSDM2 DatIn2 - * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_SetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn2Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); -} -/** - * @brief Get the source for DFSDM1 or DFSDM2 DatIn2. - * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_GetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2 - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn2Source(uint32_t Source) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM4 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK02SEL LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM4 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM4 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK13SEL LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM4 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL)); -} - -/** - * @brief Select the DFSDM1 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_SetClockInSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockInSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG, ClockSource); -} -/** - * @brief GET the DFSDM1 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_GetClockInSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockInSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG)); -} - -/** - * @brief Select the DFSDM1 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_SetClockOutSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockOutSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL, ClockSource); -} -/** - * @brief GET the DFSDM1 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_GetClockOutSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockOutSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL)); -} - -/** - * @brief Enables the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_EnableDelayClock - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_EnableDelayClock(void) -{ - SET_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); -} - -/** - * @brief Disables the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_DisableDelayClock - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_DisableDelayClock(void) -{ - CLEAR_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); -} -/** - * @brief Select the source for DFSDM2 DatIn0 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_SetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn0Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn0. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_GetDataIn0Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn0Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_SetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn2Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn2. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_GetDataIn2Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn2Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_SetDataIn4Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn4Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn4. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_GetDataIn4Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn4Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn6 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_SetDataIn6Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn6Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn6. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_GetDataIn6Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn6Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC3 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK15SEL LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK26SEL LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL)); -} - -/** - * @brief Select the DFSDM2 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_SetClockInSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockInSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG, ClockSource); -} -/** - * @brief GET the DFSDM2 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_GetClockInSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockInSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG)); -} - -/** - * @brief Select the DFSDM2 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_SetClockOutSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockOutSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL, ClockSource); -} -/** - * @brief GET the DFSDM2 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_GetClockOutSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockOutSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL)); -} - -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ -/** - * @} - */ - - -/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU - * @{ - */ - -/** - * @brief Return the device identifier - * @note For STM32F405/407xx and STM32F415/417xx devices, the device ID is 0x413 - * @note For STM32F42xxx and STM32F43xxx devices, the device ID is 0x419 - * @note For STM32F401xx devices, the device ID is 0x423 - * @note For STM32F401xx devices, the device ID is 0x433 - * @note For STM32F411xx devices, the device ID is 0x431 - * @note For STM32F410xx devices, the device ID is 0x458 - * @note For STM32F412xx devices, the device ID is 0x441 - * @note For STM32F413xx and STM32423xx devices, the device ID is 0x463 - * @note For STM32F446xx devices, the device ID is 0x421 - * @note For STM32F469xx and STM32F479xx devices, the device ID is 0x434 - * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID - * @retval Values between Min_Data=0x00 and Max_Data=0xFFF - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); -} - -/** - * @brief Return the device revision identifier - * @note This field indicates the revision of the device. - For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001, rev1 -> 0x1003, rev2 ->0x1007, revY -> 0x100F for STM32F405/407xx and STM32F415/417xx devices - For example, it is read as RevA -> 0x1000, Cat 2 revY -> 0x1003, rev1 -> 0x1007, rev3 ->0x2001 for STM32F42xxx and STM32F43xxx devices - For example, it is read as RevZ -> 0x1000, Cat 2 revA -> 0x1001 for STM32F401xB/C devices - For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 for STM32F401xD/E devices - For example, it is read as RevA -> 0x1000 for STM32F411xx,STM32F413/423xx,STM32F469/423xx, STM32F446xx and STM32F410xx devices - For example, it is read as RevZ -> 0x1001, Cat 2 revB -> 0x2000, revC -> 0x3000 for STM32F412xx devices - * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID - * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Set Trace pin assignment control - * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n - * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment - * @param PinAssignment This parameter can be one of the following values: - * @arg @ref LL_DBGMCU_TRACE_NONE - * @arg @ref LL_DBGMCU_TRACE_ASYNCH - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) -{ - MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); -} - -/** - * @brief Get Trace pin assignment control - * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n - * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment - * @retval Returned value can be one of the following values: - * @arg @ref LL_DBGMCU_TRACE_NONE - * @arg @ref LL_DBGMCU_TRACE_ASYNCH - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); -} - -/** - * @brief Freeze APB1 peripherals (group1 peripherals) - * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) -{ - SET_BIT(DBGMCU->APB1FZ, Periphs); -} - -/** - * @brief Unfreeze APB1 peripherals (group1 peripherals) - * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) -{ - CLEAR_BIT(DBGMCU->APB1FZ, Periphs); -} - -/** - * @brief Freeze APB2 peripherals - * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) -{ - SET_BIT(DBGMCU->APB2FZ, Periphs); -} - -/** - * @brief Unfreeze APB2 peripherals - * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) -{ - CLEAR_BIT(DBGMCU->APB2FZ, Periphs); -} -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EF_FLASH FLASH - * @{ - */ - -/** - * @brief Set FLASH Latency - * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency - * @param Latency This parameter can be one of the following values: - * @arg @ref LL_FLASH_LATENCY_0 - * @arg @ref LL_FLASH_LATENCY_1 - * @arg @ref LL_FLASH_LATENCY_2 - * @arg @ref LL_FLASH_LATENCY_3 - * @arg @ref LL_FLASH_LATENCY_4 - * @arg @ref LL_FLASH_LATENCY_5 - * @arg @ref LL_FLASH_LATENCY_6 - * @arg @ref LL_FLASH_LATENCY_7 - * @arg @ref LL_FLASH_LATENCY_8 - * @arg @ref LL_FLASH_LATENCY_9 - * @arg @ref LL_FLASH_LATENCY_10 - * @arg @ref LL_FLASH_LATENCY_11 - * @arg @ref LL_FLASH_LATENCY_12 - * @arg @ref LL_FLASH_LATENCY_13 - * @arg @ref LL_FLASH_LATENCY_14 - * @arg @ref LL_FLASH_LATENCY_15 - * @retval None - */ -__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) -{ - MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); -} - -/** - * @brief Get FLASH Latency - * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency - * @retval Returned value can be one of the following values: - * @arg @ref LL_FLASH_LATENCY_0 - * @arg @ref LL_FLASH_LATENCY_1 - * @arg @ref LL_FLASH_LATENCY_2 - * @arg @ref LL_FLASH_LATENCY_3 - * @arg @ref LL_FLASH_LATENCY_4 - * @arg @ref LL_FLASH_LATENCY_5 - * @arg @ref LL_FLASH_LATENCY_6 - * @arg @ref LL_FLASH_LATENCY_7 - * @arg @ref LL_FLASH_LATENCY_8 - * @arg @ref LL_FLASH_LATENCY_9 - * @arg @ref LL_FLASH_LATENCY_10 - * @arg @ref LL_FLASH_LATENCY_11 - * @arg @ref LL_FLASH_LATENCY_12 - * @arg @ref LL_FLASH_LATENCY_13 - * @arg @ref LL_FLASH_LATENCY_14 - * @arg @ref LL_FLASH_LATENCY_15 - */ -__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) -{ - return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); -} - -/** - * @brief Enable Prefetch - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); -} - -/** - * @brief Disable Prefetch - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); -} - -/** - * @brief Check if Prefetch buffer is enabled - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) -{ - return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)); -} - -/** - * @brief Enable Instruction cache - * @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableInstCache(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); -} - -/** - * @brief Disable Instruction cache - * @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableInstCache(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); -} - -/** - * @brief Enable Data cache - * @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableDataCache(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_DCEN); -} - -/** - * @brief Disable Data cache - * @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableDataCache(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN); -} - -/** - * @brief Enable Instruction cache reset - * @note bit can be written only when the instruction cache is disabled - * @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); -} - -/** - * @brief Disable Instruction cache reset - * @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); -} - -/** - * @brief Enable Data cache reset - * @note bit can be written only when the data cache is disabled - * @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); -} - -/** - * @brief Disable Data cache reset - * @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); -} - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_SYSTEM_H */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c deleted file mode 100644 index 9c2ba28..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c +++ /dev/null @@ -1,2110 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_adc.c - * @author MCD Application Team - * @brief This file provides firmware functions to manage the following - * functionalities of the Analog to Digital Converter (ADC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### ADC Peripheral features ##### - ============================================================================== - [..] - (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution. - (#) Interrupt generation at the end of conversion, end of injected conversion, - and in case of analog watchdog or overrun events - (#) Single and continuous conversion modes. - (#) Scan mode for automatic conversion of channel 0 to channel x. - (#) Data alignment with in-built data coherency. - (#) Channel-wise programmable sampling time. - (#) External trigger option with configurable polarity for both regular and - injected conversion. - (#) Dual/Triple mode (on devices with 2 ADCs or more). - (#) Configurable DMA data storage in Dual/Triple ADC mode. - (#) Configurable delay between conversions in Dual/Triple interleaved mode. - (#) ADC conversion type (refer to the datasheets). - (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at - slower speed. - (#) ADC input range: VREF(minus) = VIN = VREF(plus). - (#) DMA request generation during regular channel conversion. - - - ##### How to use this driver ##### - ============================================================================== - [..] - (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit(): - (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE() - (##) ADC pins configuration - (+++) Enable the clock for the ADC GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE() - (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init() - (##) In case of using interrupts (e.g. HAL_ADC_Start_IT()) - (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority() - (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ() - (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler() - (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA()) - (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE() - (+++) Configure and enable two DMA streams stream for managing data - transfer from peripheral to memory (output stream) - (+++) Associate the initialized DMA handle to the CRYP DMA handle - using __HAL_LINKDMA() - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the two DMA Streams. The output stream should have higher - priority than the input stream. - - *** Configuration of ADC, groups regular/injected, channels parameters *** - ============================================================================== - [..] - (#) Configure the ADC parameters (resolution, data alignment, ...) - and regular group parameters (conversion trigger, sequencer, ...) - using function HAL_ADC_Init(). - - (#) Configure the channels for regular group parameters (channel number, - channel rank into sequencer, ..., into regular group) - using function HAL_ADC_ConfigChannel(). - - (#) Optionally, configure the injected group parameters (conversion trigger, - sequencer, ..., of injected group) - and the channels for injected group parameters (channel number, - channel rank into sequencer, ..., into injected group) - using function HAL_ADCEx_InjectedConfigChannel(). - - (#) Optionally, configure the analog watchdog parameters (channels - monitored, thresholds, ...) using function HAL_ADC_AnalogWDGConfig(). - - (#) Optionally, for devices with several ADC instances: configure the - multimode parameters using function HAL_ADCEx_MultiModeConfigChannel(). - - *** Execution of ADC conversions *** - ============================================================================== - [..] - (#) ADC driver can be used among three modes: polling, interruption, - transfer by DMA. - - *** Polling mode IO operation *** - ================================= - [..] - (+) Start the ADC peripheral using HAL_ADC_Start() - (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage - user can specify the value of timeout according to his end application - (+) To read the ADC converted values, use the HAL_ADC_GetValue() function. - (+) Stop the ADC peripheral using HAL_ADC_Stop() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Start the ADC peripheral using HAL_ADC_Start_IT() - (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine - (+) At ADC end of conversion HAL_ADC_ConvCpltCallback() function is executed and user can - add his own code by customization of function pointer HAL_ADC_ConvCpltCallback - (+) In case of ADC Error, HAL_ADC_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_ADC_ErrorCallback - (+) Stop the ADC peripheral using HAL_ADC_Stop_IT() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Start the ADC peripheral using HAL_ADC_Start_DMA(), at this stage the user specify the length - of data to be transferred at each end of conversion - (+) At The end of data transfer by HAL_ADC_ConvCpltCallback() function is executed and user can - add his own code by customization of function pointer HAL_ADC_ConvCpltCallback - (+) In case of transfer Error, HAL_ADC_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_ADC_ErrorCallback - (+) Stop the ADC peripheral using HAL_ADC_Stop_DMA() - - *** ADC HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in ADC HAL driver. - - (+) __HAL_ADC_ENABLE : Enable the ADC peripheral - (+) __HAL_ADC_DISABLE : Disable the ADC peripheral - (+) __HAL_ADC_ENABLE_IT: Enable the ADC end of conversion interrupt - (+) __HAL_ADC_DISABLE_IT: Disable the ADC end of conversion interrupt - (+) __HAL_ADC_GET_IT_SOURCE: Check if the specified ADC interrupt source is enabled or disabled - (+) __HAL_ADC_CLEAR_FLAG: Clear the ADC's pending flags - (+) __HAL_ADC_GET_FLAG: Get the selected ADC's flag status - (+) ADC_GET_RESOLUTION: Return resolution bits in CR1 register - - [..] - (@) You can refer to the ADC HAL driver header file for more useful macros - - *** Deinitialization of ADC *** - ============================================================================== - [..] - (#) Disable the ADC interface - (++) ADC clock can be hard reset and disabled at RCC top level. - (++) Hard reset of ADC peripherals - using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET(). - (++) ADC clock disable using the equivalent macro/functions as configuration step. - (+++) Example: - Into HAL_ADC_MspDeInit() (recommended code location) or with - other device clock parameters configuration: - (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure); - (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI; - (+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock) - (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); - - (#) ADC pins configuration - (++) Disable the clock for the ADC GPIOs using macro __HAL_RCC_GPIOx_CLK_DISABLE() - - (#) Optionally, in case of usage of ADC with interruptions: - (++) Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn) - - (#) Optionally, in case of usage of DMA: - (++) Deinitialize the DMA using function HAL_DMA_DeInit(). - (++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn) - *** Callback registration *** - ============================================================================== - [..] - - The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_ADC_RegisterCallback() - to register an interrupt callback. - [..] - - Function HAL_ADC_RegisterCallback() allows to register following callbacks: - (+) ConvCpltCallback : ADC conversion complete callback - (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback - (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback - (+) ErrorCallback : ADC error callback - (+) InjectedConvCpltCallback : ADC group injected conversion complete callback - (+) InjectedQueueOverflowCallback : ADC group injected context queue overflow callback - (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback - (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback - (+) EndOfSamplingCallback : ADC end of sampling callback - (+) MspInitCallback : ADC Msp Init callback - (+) MspDeInitCallback : ADC Msp DeInit callback - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - - Use function HAL_ADC_UnRegisterCallback to reset a callback to the default - weak function. - [..] - - HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) ConvCpltCallback : ADC conversion complete callback - (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback - (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback - (+) ErrorCallback : ADC error callback - (+) InjectedConvCpltCallback : ADC group injected conversion complete callback - (+) InjectedQueueOverflowCallback : ADC group injected context queue overflow callback - (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback - (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback - (+) EndOfSamplingCallback : ADC end of sampling callback - (+) MspInitCallback : ADC Msp Init callback - (+) MspDeInitCallback : ADC Msp DeInit callback - [..] - - By default, after the HAL_ADC_Init() and when the state is HAL_ADC_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_ADC_ConvCpltCallback(), HAL_ADC_ErrorCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_ADC_Init()/ HAL_ADC_DeInit() only when - these callbacks are null (not registered beforehand). - [..] - - If MspInit or MspDeInit are not null, the HAL_ADC_Init()/ HAL_ADC_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - - Callbacks can be registered/unregistered in HAL_ADC_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_ADC_STATE_READY or HAL_ADC_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - [..] - - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_ADC_RegisterCallback() before calling HAL_ADC_DeInit() - or HAL_ADC_Init() function. - [..] - - When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup ADC ADC - * @brief ADC driver modules - * @{ - */ - -#ifdef HAL_ADC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup ADC_Private_Functions - * @{ - */ -/* Private function prototypes -----------------------------------------------*/ -static void ADC_Init(ADC_HandleTypeDef* hadc); -static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); -static void ADC_DMAError(DMA_HandleTypeDef *hdma); -static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup ADC_Exported_Functions ADC Exported Functions - * @{ - */ - -/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the ADC. - (+) De-initialize the ADC. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the ADCx peripheral according to the specified parameters - * in the ADC_InitStruct and initializes the ADC MSP. - * - * @note This function is used to configure the global features of the ADC ( - * ClockPrescaler, Resolution, Data Alignment and number of conversion), however, - * the rest of the configuration parameters are specific to the regular - * channels group (scan mode activation, continuous mode activation, - * External trigger source and edge, DMA continuous request after the - * last transfer and End of conversion selection). - * - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) -{ - HAL_StatusTypeDef tmp_hal_status = HAL_OK; - - /* Check ADC handle */ - if(hadc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); - assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ScanConvMode)); - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG(hadc->Init.ExternalTrigConv)); - assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); - assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion)); - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); - assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection)); - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); - - if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) - { - assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); - } - - if(hadc->State == HAL_ADC_STATE_RESET) - { -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - /* Init the ADC Callback settings */ - hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ - hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ - hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ - hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ - hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; /* Legacy weak callback */ - if (hadc->MspInitCallback == NULL) - { - hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware */ - hadc->MspInitCallback(hadc); -#else - /* Init the low level hardware */ - HAL_ADC_MspInit(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - - /* Initialize ADC error code */ - ADC_CLEAR_ERRORCODE(hadc); - - /* Allocate lock resource and initialize it */ - hadc->Lock = HAL_UNLOCKED; - } - - /* Configuration of ADC parameters if previous preliminary actions are */ - /* correctly completed. */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) - { - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_BUSY_INTERNAL); - - /* Set ADC parameters */ - ADC_Init(hadc); - - /* Set ADC error code to none */ - ADC_CLEAR_ERRORCODE(hadc); - - /* Set the ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_BUSY_INTERNAL, - HAL_ADC_STATE_READY); - } - else - { - tmp_hal_status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return tmp_hal_status; -} - -/** - * @brief Deinitializes the ADCx peripheral registers to their default reset values. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) -{ - HAL_StatusTypeDef tmp_hal_status = HAL_OK; - - /* Check ADC handle */ - if(hadc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); - - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Configuration of ADC parameters if previous preliminary actions are */ - /* correctly completed. */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - if (hadc->MspDeInitCallback == NULL) - { - hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: RCC clock, NVIC */ - hadc->MspDeInitCallback(hadc); -#else - /* DeInit the low level hardware: RCC clock, NVIC */ - HAL_ADC_MspDeInit(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - - /* Set ADC error code to none */ - ADC_CLEAR_ERRORCODE(hadc); - - /* Set ADC state */ - hadc->State = HAL_ADC_STATE_RESET; - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return tmp_hal_status; -} - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User ADC Callback - * To be used instead of the weak predefined callback - * @param hadc Pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID - * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID - * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID - * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID - * @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID ADC group injected conversion complete callback ID - * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID - * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) - { - switch (CallbackID) - { - case HAL_ADC_CONVERSION_COMPLETE_CB_ID : - hadc->ConvCpltCallback = pCallback; - break; - - case HAL_ADC_CONVERSION_HALF_CB_ID : - hadc->ConvHalfCpltCallback = pCallback; - break; - - case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : - hadc->LevelOutOfWindowCallback = pCallback; - break; - - case HAL_ADC_ERROR_CB_ID : - hadc->ErrorCallback = pCallback; - break; - - case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : - hadc->InjectedConvCpltCallback = pCallback; - break; - - case HAL_ADC_MSPINIT_CB_ID : - hadc->MspInitCallback = pCallback; - break; - - case HAL_ADC_MSPDEINIT_CB_ID : - hadc->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_ADC_STATE_RESET == hadc->State) - { - switch (CallbackID) - { - case HAL_ADC_MSPINIT_CB_ID : - hadc->MspInitCallback = pCallback; - break; - - case HAL_ADC_MSPDEINIT_CB_ID : - hadc->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Unregister a ADC Callback - * ADC callback is redirected to the weak predefined callback - * @param hadc Pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID - * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID - * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID - * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID - * @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID ADC group injected conversion complete callback ID - * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID - * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) - { - switch (CallbackID) - { - case HAL_ADC_CONVERSION_COMPLETE_CB_ID : - hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; - break; - - case HAL_ADC_CONVERSION_HALF_CB_ID : - hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; - break; - - case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : - hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; - break; - - case HAL_ADC_ERROR_CB_ID : - hadc->ErrorCallback = HAL_ADC_ErrorCallback; - break; - - case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : - hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; - break; - - case HAL_ADC_MSPINIT_CB_ID : - hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_ADC_MSPDEINIT_CB_ID : - hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_ADC_STATE_RESET == hadc->State) - { - switch (CallbackID) - { - case HAL_ADC_MSPINIT_CB_ID : - hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_ADC_MSPDEINIT_CB_ID : - hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - return status; -} - -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - -/** - * @brief Initializes the ADC MSP. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the ADC MSP. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup ADC_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Start conversion of regular channel. - (+) Stop conversion of regular channel. - (+) Start conversion of regular channel and enable interrupt. - (+) Stop conversion of regular channel and disable interrupt. - (+) Start conversion of regular channel and enable DMA transfer. - (+) Stop conversion of regular channel and disable DMA transfer. - (+) Handle ADC interrupt request. - -@endverbatim - * @{ - */ - -/** - * @brief Enables ADC and starts conversion of the regular channels. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc) -{ - __IO uint32_t counter = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Enable the ADC peripheral */ - /* Check if ADC peripheral is disabled in order to enable it and wait during - Tstab time the ADC's stabilization */ - if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON) - { - /* Enable the Peripheral */ - __HAL_ADC_ENABLE(hadc); - - /* Delay for ADC stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - - /* Start conversion if ADC is effectively enabled */ - if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - /* - Clear state bitfield related to regular group conversion results */ - /* - Set state bitfield related to regular group operation */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, - HAL_ADC_STATE_REG_BUSY); - - /* If conversions on group regular are also triggering group injected, */ - /* update ADC state. */ - if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) - { - ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); - } - - /* State machine update: Check if an injected conversion is ongoing */ - if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - /* Reset ADC error code fields related to conversions on group regular */ - CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); - } - else - { - /* Reset ADC all error code fields */ - ADC_CLEAR_ERRORCODE(hadc); - } - - /* Process unlocked */ - /* Unlock before starting ADC conversions: in case of potential */ - /* interruption, to let the process to ADC IRQ Handler. */ - __HAL_UNLOCK(hadc); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Clear regular group conversion flag and overrun flag */ - /* (To ensure of no unknown state from potential previous ADC operations) */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR); - - /* Check if Multimode enabled */ - if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI)) - { -#if defined(ADC2) && defined(ADC3) - if((hadc->Instance == ADC1) || ((hadc->Instance == ADC2) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_0)) \ - || ((hadc->Instance == ADC3) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_4))) - { -#endif /* ADC2 || ADC3 */ - /* if no external trigger present enable software conversion of regular channels */ - if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } -#if defined(ADC2) && defined(ADC3) - } -#endif /* ADC2 || ADC3 */ - } - else - { - /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */ - if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC IP internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disables ADC and stop conversion of regular channels. - * - * @note Caution: This function will stop also injected channels. - * - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Check if ADC is effectively disabled */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_READY); - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Poll for regular conversion complete - * @note ADC conversion flags EOS (end of sequence) and EOC (end of - * conversion) are cleared by this function. - * @note This function cannot be used in a particular setup: ADC configured - * in DMA mode and polling for end of each conversion (ADC init - * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). - * In this case, DMA resets the flag EOC and polling cannot be - * performed on each conversion. Nevertheless, polling can still - * be performed on the complete sequence. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param Timeout Timeout value in millisecond. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Verification that ADC configuration is compliant with polling for */ - /* each conversion: */ - /* Particular case is ADC configured in DMA mode and ADC sequencer with */ - /* several ranks and polling for end of each conversion. */ - /* For code simplicity sake, this particular case is generalized to */ - /* ADC configured in DMA mode and polling for end of each conversion. */ - if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) && - HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA) ) - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - return HAL_ERROR; - } - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check End of conversion flag */ - while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC))) - { - /* Check if timeout is disabled (set to infinite wait) */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout)) - { - /* New check to avoid false timeout detection in case of preemption */ - if(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC))) - { - /* Update ADC state machine to timeout */ - SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - return HAL_TIMEOUT; - } - } - } - } - - /* Clear regular group conversion flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC); - - /* Update ADC state machine */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); - - /* Determine whether any further conversion upcoming on group regular */ - /* by external trigger, continuous mode or scan sequence on going. */ - /* Note: On STM32F4, there is no independent flag of end of sequence. */ - /* The test of scan sequence on going is done either with scan */ - /* sequence disabled or with end of conversion flag set to */ - /* of end of sequence. */ - if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && - (hadc->Init.ContinuousConvMode == DISABLE) && - (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || - HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) - { - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); - - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); - } - } - - /* Return ADC state */ - return HAL_OK; -} - -/** - * @brief Poll for conversion event - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param EventType the ADC event type. - * This parameter can be one of the following values: - * @arg ADC_AWD_EVENT: ADC Analog watch Dog event. - * @arg ADC_OVR_EVENT: ADC Overrun event. - * @param Timeout Timeout value in millisecond. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - assert_param(IS_ADC_EVENT_TYPE(EventType)); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check selected event flag */ - while(!(__HAL_ADC_GET_FLAG(hadc,EventType))) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout)) - { - /* New check to avoid false timeout detection in case of preemption */ - if(!(__HAL_ADC_GET_FLAG(hadc,EventType))) - { - /* Update ADC state machine to timeout */ - SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - return HAL_TIMEOUT; - } - } - } - } - - /* Analog watchdog (level out of window) event */ - if(EventType == ADC_AWD_EVENT) - { - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); - - /* Clear ADC analog watchdog flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD); - } - /* Overrun event */ - else - { - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); - /* Set ADC error code to overrun */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); - - /* Clear ADC overrun flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); - } - - /* Return ADC state */ - return HAL_OK; -} - - -/** - * @brief Enables the interrupt and starts ADC conversion of regular channels. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) -{ - __IO uint32_t counter = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Enable the ADC peripheral */ - /* Check if ADC peripheral is disabled in order to enable it and wait during - Tstab time the ADC's stabilization */ - if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON) - { - /* Enable the Peripheral */ - __HAL_ADC_ENABLE(hadc); - - /* Delay for ADC stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - - /* Start conversion if ADC is effectively enabled */ - if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - /* - Clear state bitfield related to regular group conversion results */ - /* - Set state bitfield related to regular group operation */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, - HAL_ADC_STATE_REG_BUSY); - - /* If conversions on group regular are also triggering group injected, */ - /* update ADC state. */ - if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) - { - ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); - } - - /* State machine update: Check if an injected conversion is ongoing */ - if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - /* Reset ADC error code fields related to conversions on group regular */ - CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); - } - else - { - /* Reset ADC all error code fields */ - ADC_CLEAR_ERRORCODE(hadc); - } - - /* Process unlocked */ - /* Unlock before starting ADC conversions: in case of potential */ - /* interruption, to let the process to ADC IRQ Handler. */ - __HAL_UNLOCK(hadc); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Clear regular group conversion flag and overrun flag */ - /* (To ensure of no unknown state from potential previous ADC operations) */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR); - - /* Enable end of conversion interrupt for regular group */ - __HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR)); - - /* Check if Multimode enabled */ - if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI)) - { -#if defined(ADC2) && defined(ADC3) - if((hadc->Instance == ADC1) || ((hadc->Instance == ADC2) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_0)) \ - || ((hadc->Instance == ADC3) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_4))) - { -#endif /* ADC2 || ADC3 */ - /* if no external trigger present enable software conversion of regular channels */ - if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } -#if defined(ADC2) && defined(ADC3) - } -#endif /* ADC2 || ADC3 */ - } - else - { - /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */ - if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC IP internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disables the interrupt and stop ADC conversion of regular channels. - * - * @note Caution: This function will stop also injected channels. - * - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Check if ADC is effectively disabled */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Disable ADC end of conversion interrupt for regular group */ - __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR)); - - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_READY); - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Handles ADC interrupt request - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) -{ - uint32_t tmp1 = 0U, tmp2 = 0U; - - uint32_t tmp_sr = hadc->Instance->SR; - uint32_t tmp_cr1 = hadc->Instance->CR1; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); - assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion)); - assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection)); - - tmp1 = tmp_sr & ADC_FLAG_EOC; - tmp2 = tmp_cr1 & ADC_IT_EOC; - /* Check End of conversion flag for regular channels */ - if(tmp1 && tmp2) - { - /* Update state machine on conversion status if not in error state */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) - { - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); - } - - /* Determine whether any further conversion upcoming on group regular */ - /* by external trigger, continuous mode or scan sequence on going. */ - /* Note: On STM32F4, there is no independent flag of end of sequence. */ - /* The test of scan sequence on going is done either with scan */ - /* sequence disabled or with end of conversion flag set to */ - /* of end of sequence. */ - if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && - (hadc->Init.ContinuousConvMode == DISABLE) && - (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || - HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) - { - /* Disable ADC end of single conversion interrupt on group regular */ - /* Note: Overrun interrupt was enabled with EOC interrupt in */ - /* HAL_ADC_Start_IT(), but is not disabled here because can be used */ - /* by overrun IRQ process below. */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); - - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); - - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); - } - } - - /* Conversion complete callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->ConvCpltCallback(hadc); -#else - HAL_ADC_ConvCpltCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - - /* Clear regular group conversion flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC); - } - - tmp1 = tmp_sr & ADC_FLAG_JEOC; - tmp2 = tmp_cr1 & ADC_IT_JEOC; - /* Check End of conversion flag for injected channels */ - if(tmp1 && tmp2) - { - /* Update state machine on conversion status if not in error state */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) - { - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); - } - - /* Determine whether any further conversion upcoming on group injected */ - /* by external trigger, scan sequence on going or by automatic injected */ - /* conversion from group regular (same conditions as group regular */ - /* interruption disabling above). */ - if(ADC_IS_SOFTWARE_START_INJECTED(hadc) && - (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) || - HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) && - (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) && - (ADC_IS_SOFTWARE_START_REGULAR(hadc) && - (hadc->Init.ContinuousConvMode == DISABLE) ) ) ) - { - /* Disable ADC end of single conversion interrupt on group injected */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); - - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); - - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); - } - } - - /* Conversion complete callback */ - /* Conversion complete callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->InjectedConvCpltCallback(hadc); -#else - HAL_ADCEx_InjectedConvCpltCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - - /* Clear injected group conversion flag */ - __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC)); - } - - tmp1 = tmp_sr & ADC_FLAG_AWD; - tmp2 = tmp_cr1 & ADC_IT_AWD; - /* Check Analog watchdog flag */ - if(tmp1 && tmp2) - { - if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD)) - { - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); - - /* Level out of window callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->LevelOutOfWindowCallback(hadc); -#else - HAL_ADC_LevelOutOfWindowCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - - /* Clear the ADC analog watchdog flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD); - } - } - - tmp1 = tmp_sr & ADC_FLAG_OVR; - tmp2 = tmp_cr1 & ADC_IT_OVR; - /* Check Overrun flag */ - if(tmp1 && tmp2) - { - /* Note: On STM32F4, ADC overrun can be set through other parameters */ - /* refer to description of parameter "EOCSelection" for more */ - /* details. */ - - /* Set ADC error code to overrun */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); - - /* Clear ADC overrun flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); - - /* Error callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->ErrorCallback(hadc); -#else - HAL_ADC_ErrorCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - - /* Clear the Overrun flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); - } -} - -/** - * @brief Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from ADC peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length) -{ - __IO uint32_t counter = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Enable the ADC peripheral */ - /* Check if ADC peripheral is disabled in order to enable it and wait during - Tstab time the ADC's stabilization */ - if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON) - { - /* Enable the Peripheral */ - __HAL_ADC_ENABLE(hadc); - - /* Delay for ADC stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - - /* Check ADC DMA Mode */ - /* - disable the DMA Mode if it is already enabled */ - if((hadc->Instance->CR2 & ADC_CR2_DMA) == ADC_CR2_DMA) - { - CLEAR_BIT(hadc->Instance->CR2, ADC_CR2_DMA); - } - - /* Start conversion if ADC is effectively enabled */ - if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - /* - Clear state bitfield related to regular group conversion results */ - /* - Set state bitfield related to regular group operation */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, - HAL_ADC_STATE_REG_BUSY); - - /* If conversions on group regular are also triggering group injected, */ - /* update ADC state. */ - if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) - { - ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); - } - - /* State machine update: Check if an injected conversion is ongoing */ - if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - /* Reset ADC error code fields related to conversions on group regular */ - CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); - } - else - { - /* Reset ADC all error code fields */ - ADC_CLEAR_ERRORCODE(hadc); - } - - /* Process unlocked */ - /* Unlock before starting ADC conversions: in case of potential */ - /* interruption, to let the process to ADC IRQ Handler. */ - __HAL_UNLOCK(hadc); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Set the DMA transfer complete callback */ - hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; - - /* Set the DMA half transfer complete callback */ - hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; - - /* Set the DMA error callback */ - hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; - - - /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ - /* start (in case of SW start): */ - - /* Clear regular group conversion flag and overrun flag */ - /* (To ensure of no unknown state from potential previous ADC operations) */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR); - - /* Enable ADC overrun interrupt */ - __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); - - /* Enable ADC DMA mode */ - hadc->Instance->CR2 |= ADC_CR2_DMA; - - /* Start the DMA channel */ - HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); - - /* Check if Multimode enabled */ - if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI)) - { -#if defined(ADC2) && defined(ADC3) - if((hadc->Instance == ADC1) || ((hadc->Instance == ADC2) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_0)) \ - || ((hadc->Instance == ADC3) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_4))) - { -#endif /* ADC2 || ADC3 */ - /* if no external trigger present enable software conversion of regular channels */ - if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } -#if defined(ADC2) && defined(ADC3) - } -#endif /* ADC2 || ADC3 */ - } - else - { - /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */ - if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC IP internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disables ADC DMA (Single-ADC mode) and disables ADC peripheral - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc) -{ - HAL_StatusTypeDef tmp_hal_status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Check if ADC is effectively disabled */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Disable the selected ADC DMA mode */ - hadc->Instance->CR2 &= ~ADC_CR2_DMA; - - /* Disable the DMA channel (in case of DMA in circular mode or stop while */ - /* DMA transfer is on going) */ - if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) - { - tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); - - /* Check if DMA channel effectively disabled */ - if (tmp_hal_status != HAL_OK) - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); - } - } - - /* Disable ADC overrun interrupt */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); - - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_READY); - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return tmp_hal_status; -} - -/** - * @brief Gets the converted value from data register of regular channel. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval Converted value - */ -uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc) -{ - /* Return the selected ADC converted value */ - return hadc->Instance->DR; -} - -/** - * @brief Regular conversion complete callback in non blocking mode - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_ConvCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Regular conversion half DMA transfer callback in non blocking mode - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_ConvHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Analog watchdog callback in non blocking mode - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_LevelOoutOfWindowCallback could be implemented in the user file - */ -} - -/** - * @brief Error ADC callback. - * @note In case of error due to overrun when using ADC with DMA transfer - * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): - * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". - * - If needed, restart a new ADC conversion using function - * "HAL_ADC_Start_DMA()" - * (this function is also clearing overrun flag) - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure regular channels. - (+) Configure injected channels. - (+) Configure multimode. - (+) Configure the analog watch dog. - -@endverbatim - * @{ - */ - - /** - * @brief Configures for the selected ADC regular channel its corresponding - * rank in the sequencer and its sample time. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param sConfig ADC configuration structure. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig) -{ - __IO uint32_t counter = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_ADC_CHANNEL(sConfig->Channel)); - assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); - assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* if ADC_Channel_10 ... ADC_Channel_18 is selected */ - if (sConfig->Channel > ADC_CHANNEL_9) - { - /* Clear the old sample time */ - hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel); - - /* Set the new sample time */ - hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel); - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Clear the old sample time */ - hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel); - - /* Set the new sample time */ - hadc->Instance->SMPR2 |= ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel); - } - - /* For Rank 1 to 6 */ - if (sConfig->Rank < 7U) - { - /* Clear the old SQx bits for the selected rank */ - hadc->Instance->SQR3 &= ~ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank); - - /* Set the SQx bits for the selected rank */ - hadc->Instance->SQR3 |= ADC_SQR3_RK(sConfig->Channel, sConfig->Rank); - } - /* For Rank 7 to 12 */ - else if (sConfig->Rank < 13U) - { - /* Clear the old SQx bits for the selected rank */ - hadc->Instance->SQR2 &= ~ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank); - - /* Set the SQx bits for the selected rank */ - hadc->Instance->SQR2 |= ADC_SQR2_RK(sConfig->Channel, sConfig->Rank); - } - /* For Rank 13 to 16 */ - else - { - /* Clear the old SQx bits for the selected rank */ - hadc->Instance->SQR1 &= ~ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank); - - /* Set the SQx bits for the selected rank */ - hadc->Instance->SQR1 |= ADC_SQR1_RK(sConfig->Channel, sConfig->Rank); - } - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* if ADC1 Channel_18 is selected for VBAT Channel ennable VBATE */ - if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT)) - { - /* Disable the TEMPSENSOR channel in case of using board with multiplixed ADC_CHANNEL_VBAT & ADC_CHANNEL_TEMPSENSOR*/ - if ((uint16_t)ADC_CHANNEL_TEMPSENSOR == (uint16_t)ADC_CHANNEL_VBAT) - { - tmpADC_Common->CCR &= ~ADC_CCR_TSVREFE; - } - /* Enable the VBAT channel*/ - tmpADC_Common->CCR |= ADC_CCR_VBATE; - } - - /* if ADC1 Channel_16 or Channel_18 is selected for Temperature sensor or - Channel_17 is selected for VREFINT enable TSVREFE */ - if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT))) - { - /* Disable the VBAT channel in case of using board with multiplixed ADC_CHANNEL_VBAT & ADC_CHANNEL_TEMPSENSOR*/ - if ((uint16_t)ADC_CHANNEL_TEMPSENSOR == (uint16_t)ADC_CHANNEL_VBAT) - { - tmpADC_Common->CCR &= ~ADC_CCR_VBATE; - } - /* Enable the Temperature sensor and VREFINT channel*/ - tmpADC_Common->CCR |= ADC_CCR_TSVREFE; - - if(sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) - { - /* Delay for temperature sensor stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the analog watchdog. - * @note Analog watchdog thresholds can be modified while ADC conversion - * is on going. - * In this case, some constraints must be taken into account: - * The programmed threshold values are effective from the next - * ADC EOC (end of unitary conversion). - * Considering that registers write delay may happen due to - * bus activity, this might cause an uncertainty on the - * effective timing of the new programmed threshold values. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param AnalogWDGConfig pointer to an ADC_AnalogWDGConfTypeDef structure - * that contains the configuration information of ADC analog watchdog. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig) -{ -#ifdef USE_FULL_ASSERT - uint32_t tmp = 0U; -#endif /* USE_FULL_ASSERT */ - - /* Check the parameters */ - assert_param(IS_ADC_ANALOG_WATCHDOG(AnalogWDGConfig->WatchdogMode)); - assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel)); - assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); - -#ifdef USE_FULL_ASSERT - tmp = ADC_GET_RESOLUTION(hadc); - assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->HighThreshold)); - assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->LowThreshold)); -#endif /* USE_FULL_ASSERT */ - - /* Process locked */ - __HAL_LOCK(hadc); - - if(AnalogWDGConfig->ITMode == ENABLE) - { - /* Enable the ADC Analog watchdog interrupt */ - __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD); - } - else - { - /* Disable the ADC Analog watchdog interrupt */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD); - } - - /* Clear AWDEN, JAWDEN and AWDSGL bits */ - hadc->Instance->CR1 &= ~(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN | ADC_CR1_AWDEN); - - /* Set the analog watchdog enable mode */ - hadc->Instance->CR1 |= AnalogWDGConfig->WatchdogMode; - - /* Set the high threshold */ - hadc->Instance->HTR = AnalogWDGConfig->HighThreshold; - - /* Set the low threshold */ - hadc->Instance->LTR = AnalogWDGConfig->LowThreshold; - - /* Clear the Analog watchdog channel select bits */ - hadc->Instance->CR1 &= ~ADC_CR1_AWDCH; - - /* Set the Analog watchdog channel */ - hadc->Instance->CR1 |= (uint32_t)((uint16_t)(AnalogWDGConfig->Channel)); - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup ADC_Exported_Functions_Group4 ADC Peripheral State functions - * @brief ADC Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State and errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the ADC state - (+) Check the ADC Error - -@endverbatim - * @{ - */ - -/** - * @brief return the ADC state - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL state - */ -uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc) -{ - /* Return ADC state */ - return hadc->State; -} - -/** - * @brief Return the ADC error code - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval ADC Error Code - */ -uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) -{ - return hadc->ErrorCode; -} - -/** - * @} - */ - -/** @addtogroup ADC_Private_Functions - * @{ - */ - -/** - * @brief Initializes the ADCx peripheral according to the specified parameters - * in the ADC_InitStruct without initializing the ADC MSP. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -static void ADC_Init(ADC_HandleTypeDef* hadc) -{ - ADC_Common_TypeDef *tmpADC_Common; - - /* Set ADC parameters */ - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Set the ADC clock prescaler */ - tmpADC_Common->CCR &= ~(ADC_CCR_ADCPRE); - tmpADC_Common->CCR |= hadc->Init.ClockPrescaler; - - /* Set ADC scan mode */ - hadc->Instance->CR1 &= ~(ADC_CR1_SCAN); - hadc->Instance->CR1 |= ADC_CR1_SCANCONV(hadc->Init.ScanConvMode); - - /* Set ADC resolution */ - hadc->Instance->CR1 &= ~(ADC_CR1_RES); - hadc->Instance->CR1 |= hadc->Init.Resolution; - - /* Set ADC data alignment */ - hadc->Instance->CR2 &= ~(ADC_CR2_ALIGN); - hadc->Instance->CR2 |= hadc->Init.DataAlign; - - /* Enable external trigger if trigger selection is different of software */ - /* start. */ - /* Note: This configuration keeps the hardware feature of parameter */ - /* ExternalTrigConvEdge "trigger edge none" equivalent to */ - /* software start. */ - if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) - { - /* Select external trigger to start conversion */ - hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL); - hadc->Instance->CR2 |= hadc->Init.ExternalTrigConv; - - /* Select external trigger polarity */ - hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN); - hadc->Instance->CR2 |= hadc->Init.ExternalTrigConvEdge; - } - else - { - /* Reset the external trigger */ - hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL); - hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN); - } - - /* Enable or disable ADC continuous conversion mode */ - hadc->Instance->CR2 &= ~(ADC_CR2_CONT); - hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode); - - if(hadc->Init.DiscontinuousConvMode != DISABLE) - { - assert_param(IS_ADC_REGULAR_DISC_NUMBER(hadc->Init.NbrOfDiscConversion)); - - /* Enable the selected ADC regular discontinuous mode */ - hadc->Instance->CR1 |= (uint32_t)ADC_CR1_DISCEN; - - /* Set the number of channels to be converted in discontinuous mode */ - hadc->Instance->CR1 &= ~(ADC_CR1_DISCNUM); - hadc->Instance->CR1 |= ADC_CR1_DISCONTINUOUS(hadc->Init.NbrOfDiscConversion); - } - else - { - /* Disable the selected ADC regular discontinuous mode */ - hadc->Instance->CR1 &= ~(ADC_CR1_DISCEN); - } - - /* Set ADC number of conversion */ - hadc->Instance->SQR1 &= ~(ADC_SQR1_L); - hadc->Instance->SQR1 |= ADC_SQR1(hadc->Init.NbrOfConversion); - - /* Enable or disable ADC DMA continuous request */ - hadc->Instance->CR2 &= ~(ADC_CR2_DDS); - hadc->Instance->CR2 |= ADC_CR2_DMAContReq((uint32_t)hadc->Init.DMAContinuousRequests); - - /* Enable or disable ADC end of conversion selection */ - hadc->Instance->CR2 &= ~(ADC_CR2_EOCS); - hadc->Instance->CR2 |= ADC_CR2_EOCSelection(hadc->Init.EOCSelection); -} - -/** - * @brief DMA transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) -{ - /* Retrieve ADC handle corresponding to current DMA handle */ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - /* Update state machine on conversion status if not in error state */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) - { - /* Update ADC state machine */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); - - /* Determine whether any further conversion upcoming on group regular */ - /* by external trigger, continuous mode or scan sequence on going. */ - /* Note: On STM32F4, there is no independent flag of end of sequence. */ - /* The test of scan sequence on going is done either with scan */ - /* sequence disabled or with end of conversion flag set to */ - /* of end of sequence. */ - if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && - (hadc->Init.ContinuousConvMode == DISABLE) && - (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || - HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) - { - /* Disable ADC end of single conversion interrupt on group regular */ - /* Note: Overrun interrupt was enabled with EOC interrupt in */ - /* HAL_ADC_Start_IT(), but is not disabled here because can be used */ - /* by overrun IRQ process below. */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); - - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); - - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); - } - } - - /* Conversion complete callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->ConvCpltCallback(hadc); -#else - HAL_ADC_ConvCpltCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - } - else /* DMA and-or internal error occurred */ - { - if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) - { - /* Call HAL ADC Error Callback function */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->ErrorCallback(hadc); -#else - HAL_ADC_ErrorCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - } - else - { - /* Call DMA error callback */ - hadc->DMA_Handle->XferErrorCallback(hdma); - } - } -} - -/** - * @brief DMA half transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) -{ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* Half conversion callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->ConvHalfCpltCallback(hadc); -#else - HAL_ADC_ConvHalfCpltCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA error callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void ADC_DMAError(DMA_HandleTypeDef *hdma) -{ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - hadc->State= HAL_ADC_STATE_ERROR_DMA; - /* Set ADC error code to DMA error */ - hadc->ErrorCode |= HAL_ADC_ERROR_DMA; - /* Error callback */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - hadc->ErrorCallback(hadc); -#else - HAL_ADC_ErrorCallback(hadc); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_ADC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c deleted file mode 100644 index c971e22..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c +++ /dev/null @@ -1,1112 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_adc_ex.c - * @author MCD Application Team - * @brief This file provides firmware functions to manage the following - * functionalities of the ADC extension peripheral: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit(): - (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE() - (##) ADC pins configuration - (+++) Enable the clock for the ADC GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE() - (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init() - (##) In case of using interrupts (e.g. HAL_ADC_Start_IT()) - (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority() - (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ() - (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler() - (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA()) - (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE() - (+++) Configure and enable two DMA streams stream for managing data - transfer from peripheral to memory (output stream) - (+++) Associate the initialized DMA handle to the ADC DMA handle - using __HAL_LINKDMA() - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the two DMA Streams. The output stream should have higher - priority than the input stream. - (#) Configure the ADC Prescaler, conversion resolution and data alignment - using the HAL_ADC_Init() function. - - (#) Configure the ADC Injected channels group features, use HAL_ADC_Init() - and HAL_ADC_ConfigChannel() functions. - - (#) Three operation modes are available within this driver: - - *** Polling mode IO operation *** - ================================= - [..] - (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart() - (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage - user can specify the value of timeout according to his end application - (+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function. - (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT() - (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine - (+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can - add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback - (+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback - (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT() - - *** Multi mode ADCs Regular channels configuration *** - ====================================================== - [..] - (+) Select the Multi mode ADC regular channels features (dual or triple mode) - and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions. - (+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length - of data to be transferred at each end of conversion - (+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function. - - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup ADCEx ADCEx - * @brief ADC Extended driver modules - * @{ - */ - -#ifdef HAL_ADC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup ADCEx_Private_Functions - * @{ - */ -/* Private function prototypes -----------------------------------------------*/ -static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma); -static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma); -static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Functions ADC Exported Functions - * @{ - */ - -/** @defgroup ADCEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Start conversion of injected channel. - (+) Stop conversion of injected channel. - (+) Start multimode and enable DMA transfer. - (+) Stop multimode and disable DMA transfer. - (+) Get result of injected channel conversion. - (+) Get result of multimode conversion. - (+) Configure injected channels. - (+) Configure multimode. - -@endverbatim - * @{ - */ - -/** - * @brief Enables the selected ADC software start conversion of the injected channels. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc) -{ - __IO uint32_t counter = 0U; - uint32_t tmp1 = 0U, tmp2 = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Enable the ADC peripheral */ - - /* Check if ADC peripheral is disabled in order to enable it and wait during - Tstab time the ADC's stabilization */ - if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON) - { - /* Enable the Peripheral */ - __HAL_ADC_ENABLE(hadc); - - /* Delay for ADC stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - - /* Start conversion if ADC is effectively enabled */ - if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - /* - Clear state bitfield related to injected group conversion results */ - /* - Set state bitfield related to injected operation */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, - HAL_ADC_STATE_INJ_BUSY); - - /* Check if a regular conversion is ongoing */ - /* Note: On this device, there is no ADC error code fields related to */ - /* conversions on group injected only. In case of conversion on */ - /* going on group regular, no error code is reset. */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) - { - /* Reset ADC all error code fields */ - ADC_CLEAR_ERRORCODE(hadc); - } - - /* Process unlocked */ - /* Unlock before starting ADC conversions: in case of potential */ - /* interruption, to let the process to ADC IRQ Handler. */ - __HAL_UNLOCK(hadc); - - /* Clear injected group conversion flag */ - /* (To ensure of no unknown state from potential previous ADC operations) */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Check if Multimode enabled */ - if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI)) - { - tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN); - tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO); - if(tmp1 && tmp2) - { - /* Enable the selected ADC software conversion for injected group */ - hadc->Instance->CR2 |= ADC_CR2_JSWSTART; - } - } - else - { - tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN); - tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO); - if((hadc->Instance == ADC1) && tmp1 && tmp2) - { - /* Enable the selected ADC software conversion for injected group */ - hadc->Instance->CR2 |= ADC_CR2_JSWSTART; - } - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC IP internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Enables the interrupt and starts ADC conversion of injected channels. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) -{ - __IO uint32_t counter = 0U; - uint32_t tmp1 = 0U, tmp2 = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Enable the ADC peripheral */ - - /* Check if ADC peripheral is disabled in order to enable it and wait during - Tstab time the ADC's stabilization */ - if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON) - { - /* Enable the Peripheral */ - __HAL_ADC_ENABLE(hadc); - - /* Delay for ADC stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - - /* Start conversion if ADC is effectively enabled */ - if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - /* - Clear state bitfield related to injected group conversion results */ - /* - Set state bitfield related to injected operation */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, - HAL_ADC_STATE_INJ_BUSY); - - /* Check if a regular conversion is ongoing */ - /* Note: On this device, there is no ADC error code fields related to */ - /* conversions on group injected only. In case of conversion on */ - /* going on group regular, no error code is reset. */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) - { - /* Reset ADC all error code fields */ - ADC_CLEAR_ERRORCODE(hadc); - } - - /* Process unlocked */ - /* Unlock before starting ADC conversions: in case of potential */ - /* interruption, to let the process to ADC IRQ Handler. */ - __HAL_UNLOCK(hadc); - - /* Clear injected group conversion flag */ - /* (To ensure of no unknown state from potential previous ADC operations) */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); - - /* Enable end of conversion interrupt for injected channels */ - __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Check if Multimode enabled */ - if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI)) - { - tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN); - tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO); - if(tmp1 && tmp2) - { - /* Enable the selected ADC software conversion for injected group */ - hadc->Instance->CR2 |= ADC_CR2_JSWSTART; - } - } - else - { - tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN); - tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO); - if((hadc->Instance == ADC1) && tmp1 && tmp2) - { - /* Enable the selected ADC software conversion for injected group */ - hadc->Instance->CR2 |= ADC_CR2_JSWSTART; - } - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC IP internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop conversion of injected channels. Disable ADC peripheral if - * no regular conversion is on going. - * @note If ADC must be disabled and if conversion is on going on - * regular group, function HAL_ADC_Stop must be used to stop both - * injected and regular groups, and disable the ADC. - * @note If injected group mode auto-injection is enabled, - * function HAL_ADC_Stop must be used. - * @note In case of auto-injection mode, HAL_ADC_Stop must be used. - * @param hadc ADC handle - * @retval None - */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc) -{ - HAL_StatusTypeDef tmp_hal_status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Stop potential conversion and disable ADC peripheral */ - /* Conditioned to: */ - /* - No conversion on the other group (regular group) is intended to */ - /* continue (injected and regular groups stop conversion and ADC disable */ - /* are common) */ - /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */ - if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) && - HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) - { - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Check if ADC is effectively disabled */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_READY); - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); - - tmp_hal_status = HAL_ERROR; - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return tmp_hal_status; -} - -/** - * @brief Poll for injected conversion complete - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param Timeout Timeout value in millisecond. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check End of conversion flag */ - while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC))) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* New check to avoid false timeout detection in case of preemption */ - if(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC))) - { - hadc->State= HAL_ADC_STATE_TIMEOUT; - /* Process unlocked */ - __HAL_UNLOCK(hadc); - return HAL_TIMEOUT; - } - } - } - } - - /* Clear injected group conversion flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JSTRT | ADC_FLAG_JEOC); - - /* Update ADC state machine */ - SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); - - /* Determine whether any further conversion upcoming on group injected */ - /* by external trigger, continuous mode or scan sequence on going. */ - /* Note: On STM32F4, there is no independent flag of end of sequence. */ - /* The test of scan sequence on going is done either with scan */ - /* sequence disabled or with end of conversion flag set to */ - /* of end of sequence. */ - if(ADC_IS_SOFTWARE_START_INJECTED(hadc) && - (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) || - HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) && - (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) && - (ADC_IS_SOFTWARE_START_REGULAR(hadc) && - (hadc->Init.ContinuousConvMode == DISABLE) ) ) ) - { - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); - - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); - } - } - - /* Return ADC state */ - return HAL_OK; -} - -/** - * @brief Stop conversion of injected channels, disable interruption of - * end-of-conversion. Disable ADC peripheral if no regular conversion - * is on going. - * @note If ADC must be disabled and if conversion is on going on - * regular group, function HAL_ADC_Stop must be used to stop both - * injected and regular groups, and disable the ADC. - * @note If injected group mode auto-injection is enabled, - * function HAL_ADC_Stop must be used. - * @param hadc ADC handle - * @retval None - */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc) -{ - HAL_StatusTypeDef tmp_hal_status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Stop potential conversion and disable ADC peripheral */ - /* Conditioned to: */ - /* - No conversion on the other group (regular group) is intended to */ - /* continue (injected and regular groups stop conversion and ADC disable */ - /* are common) */ - /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */ - if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) && - HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) - { - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Check if ADC is effectively disabled */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Disable ADC end of conversion interrupt for injected channels */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); - - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_READY); - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); - - tmp_hal_status = HAL_ERROR; - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return tmp_hal_status; -} - -/** - * @brief Gets the converted value from data register of injected channel. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param InjectedRank the ADC injected rank. - * This parameter can be one of the following values: - * @arg ADC_INJECTED_RANK_1: Injected Channel1 selected - * @arg ADC_INJECTED_RANK_2: Injected Channel2 selected - * @arg ADC_INJECTED_RANK_3: Injected Channel3 selected - * @arg ADC_INJECTED_RANK_4: Injected Channel4 selected - * @retval None - */ -uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank) -{ - __IO uint32_t tmp = 0U; - - /* Check the parameters */ - assert_param(IS_ADC_INJECTED_RANK(InjectedRank)); - - /* Clear injected group conversion flag to have similar behaviour as */ - /* regular group: reading data register also clears end of conversion flag. */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); - - /* Return the selected ADC converted value */ - switch(InjectedRank) - { - case ADC_INJECTED_RANK_4: - { - tmp = hadc->Instance->JDR4; - } - break; - case ADC_INJECTED_RANK_3: - { - tmp = hadc->Instance->JDR3; - } - break; - case ADC_INJECTED_RANK_2: - { - tmp = hadc->Instance->JDR2; - } - break; - case ADC_INJECTED_RANK_1: - { - tmp = hadc->Instance->JDR1; - } - break; - default: - break; - } - return tmp; -} - -/** - * @brief Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral - * - * @note Caution: This function must be used only with the ADC master. - * - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param pData Pointer to buffer in which transferred from ADC peripheral to memory will be stored. - * @param Length The length of data to be transferred from ADC peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length) -{ - __IO uint32_t counter = 0U; - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); - assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Check if ADC peripheral is disabled in order to enable it and wait during - Tstab time the ADC's stabilization */ - if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON) - { - /* Enable the Peripheral */ - __HAL_ADC_ENABLE(hadc); - - /* Delay for temperature sensor stabilization time */ - /* Compute number of CPU cycles to wait for */ - counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U)); - while(counter != 0U) - { - counter--; - } - } - - /* Start conversion if ADC is effectively enabled */ - if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Set ADC state */ - /* - Clear state bitfield related to regular group conversion results */ - /* - Set state bitfield related to regular group operation */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, - HAL_ADC_STATE_REG_BUSY); - - /* If conversions on group regular are also triggering group injected, */ - /* update ADC state. */ - if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) - { - ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); - } - - /* State machine update: Check if an injected conversion is ongoing */ - if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - /* Reset ADC error code fields related to conversions on group regular */ - CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); - } - else - { - /* Reset ADC all error code fields */ - ADC_CLEAR_ERRORCODE(hadc); - } - - /* Process unlocked */ - /* Unlock before starting ADC conversions: in case of potential */ - /* interruption, to let the process to ADC IRQ Handler. */ - __HAL_UNLOCK(hadc); - - /* Set the DMA transfer complete callback */ - hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt; - - /* Set the DMA half transfer complete callback */ - hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt; - - /* Set the DMA error callback */ - hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ; - - /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ - /* start (in case of SW start): */ - - /* Clear regular group conversion flag and overrun flag */ - /* (To ensure of no unknown state from potential previous ADC operations) */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC); - - /* Enable ADC overrun interrupt */ - __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - if (hadc->Init.DMAContinuousRequests != DISABLE) - { - /* Enable the selected ADC DMA request after last transfer */ - tmpADC_Common->CCR |= ADC_CCR_DDS; - } - else - { - /* Disable the selected ADC EOC rising on each regular channel conversion */ - tmpADC_Common->CCR &= ~ADC_CCR_DDS; - } - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&tmpADC_Common->CDR, (uint32_t)pData, Length); - - /* if no external trigger present enable software conversion of regular channels */ - if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) - { - /* Enable the selected ADC software conversion for regular group */ - hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART; - } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC IP internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disables ADC DMA (multi-ADC mode) and disables ADC peripheral - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc) -{ - HAL_StatusTypeDef tmp_hal_status = HAL_OK; - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Stop potential conversion on going, on regular and injected groups */ - /* Disable ADC peripheral */ - __HAL_ADC_DISABLE(hadc); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Check if ADC is effectively disabled */ - if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON)) - { - /* Disable the selected ADC DMA mode for multimode */ - tmpADC_Common->CCR &= ~ADC_CCR_DDS; - - /* Disable the DMA channel (in case of DMA in circular mode or stop while */ - /* DMA transfer is on going) */ - tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); - - /* Disable ADC overrun interrupt */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); - - /* Set ADC state */ - ADC_STATE_CLR_SET(hadc->State, - HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, - HAL_ADC_STATE_READY); - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return tmp_hal_status; -} - -/** - * @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results - * data in the selected multi mode. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval The converted data value. - */ -uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc) -{ - ADC_Common_TypeDef *tmpADC_Common; - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Return the multi mode conversion value */ - return tmpADC_Common->CDR; -} - -/** - * @brief Injected conversion complete callback in non blocking mode - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @retval None - */ -__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hadc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Configures for the selected ADC injected channel its corresponding - * rank in the sequencer and its sample time. - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param sConfigInjected ADC configuration structure for injected channel. - * @retval None - */ -HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected) -{ - -#ifdef USE_FULL_ASSERT - uint32_t tmp = 0U; - -#endif /* USE_FULL_ASSERT */ - - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel)); - assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank)); - assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime)); - assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv)); - assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion)); - assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv)); - assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode)); - -#ifdef USE_FULL_ASSERT - tmp = ADC_GET_RESOLUTION(hadc); - assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset)); -#endif /* USE_FULL_ASSERT */ - - if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) - { - assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge)); - } - - /* Process locked */ - __HAL_LOCK(hadc); - - /* if ADC_Channel_10 ... ADC_Channel_18 is selected */ - if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9) - { - /* Clear the old sample time */ - hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel); - - /* Set the new sample time */ - hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel); - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Clear the old sample time */ - hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel); - - /* Set the new sample time */ - hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel); - } - - /*---------------------------- ADCx JSQR Configuration -----------------*/ - hadc->Instance->JSQR &= ~(ADC_JSQR_JL); - hadc->Instance->JSQR |= ADC_SQR1(sConfigInjected->InjectedNbrOfConversion); - - /* Rank configuration */ - - /* Clear the old SQx bits for the selected rank */ - hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion); - - /* Set the SQx bits for the selected rank */ - hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion); - - /* Enable external trigger if trigger selection is different of software */ - /* start. */ - /* Note: This configuration keeps the hardware feature of parameter */ - /* ExternalTrigConvEdge "trigger edge none" equivalent to */ - /* software start. */ - if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) - { - /* Select external trigger to start conversion */ - hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL); - hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConv; - - /* Select external trigger polarity */ - hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN); - hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge; - } - else - { - /* Reset the external trigger */ - hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL); - hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN); - } - - if (sConfigInjected->AutoInjectedConv != DISABLE) - { - /* Enable the selected ADC automatic injected group conversion */ - hadc->Instance->CR1 |= ADC_CR1_JAUTO; - } - else - { - /* Disable the selected ADC automatic injected group conversion */ - hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO); - } - - if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE) - { - /* Enable the selected ADC injected discontinuous mode */ - hadc->Instance->CR1 |= ADC_CR1_JDISCEN; - } - else - { - /* Disable the selected ADC injected discontinuous mode */ - hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN); - } - - switch(sConfigInjected->InjectedRank) - { - case 1U: - /* Set injected channel 1 offset */ - hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1); - hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset; - break; - case 2U: - /* Set injected channel 2 offset */ - hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2); - hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset; - break; - case 3U: - /* Set injected channel 3 offset */ - hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3); - hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset; - break; - default: - /* Set injected channel 4 offset */ - hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4); - hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset; - break; - } - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* if ADC1 Channel_18 is selected enable VBAT Channel */ - if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT)) - { - /* Enable the VBAT channel*/ - tmpADC_Common->CCR |= ADC_CCR_VBATE; - } - - /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */ - if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT))) - { - /* Enable the TSVREFE channel*/ - tmpADC_Common->CCR |= ADC_CCR_TSVREFE; - } - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the ADC multi-mode - * @param hadc pointer to a ADC_HandleTypeDef structure that contains - * the configuration information for the specified ADC. - * @param multimode pointer to an ADC_MultiModeTypeDef structure that contains - * the configuration information for multimode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode) -{ - - ADC_Common_TypeDef *tmpADC_Common; - - /* Check the parameters */ - assert_param(IS_ADC_MODE(multimode->Mode)); - assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode)); - assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay)); - - /* Process locked */ - __HAL_LOCK(hadc); - - /* Pointer to the common control register to which is belonging hadc */ - /* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */ - /* control register) */ - tmpADC_Common = ADC_COMMON_REGISTER(hadc); - - /* Set ADC mode */ - tmpADC_Common->CCR &= ~(ADC_CCR_MULTI); - tmpADC_Common->CCR |= multimode->Mode; - - /* Set the ADC DMA access mode */ - tmpADC_Common->CCR &= ~(ADC_CCR_DMA); - tmpADC_Common->CCR |= multimode->DMAAccessMode; - - /* Set delay between two sampling phases */ - tmpADC_Common->CCR &= ~(ADC_CCR_DELAY); - tmpADC_Common->CCR |= multimode->TwoSamplingDelay; - - /* Process unlocked */ - __HAL_UNLOCK(hadc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** - * @brief DMA transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma) -{ - /* Retrieve ADC handle corresponding to current DMA handle */ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - /* Update state machine on conversion status if not in error state */ - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) - { - /* Update ADC state machine */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); - - /* Determine whether any further conversion upcoming on group regular */ - /* by external trigger, continuous mode or scan sequence on going. */ - /* Note: On STM32F4, there is no independent flag of end of sequence. */ - /* The test of scan sequence on going is done either with scan */ - /* sequence disabled or with end of conversion flag set to */ - /* of end of sequence. */ - if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && - (hadc->Init.ContinuousConvMode == DISABLE) && - (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || - HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) - { - /* Disable ADC end of single conversion interrupt on group regular */ - /* Note: Overrun interrupt was enabled with EOC interrupt in */ - /* HAL_ADC_Start_IT(), but is not disabled here because can be used */ - /* by overrun IRQ process below. */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); - - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); - - if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); - } - } - - /* Conversion complete callback */ - HAL_ADC_ConvCpltCallback(hadc); - } - else - { - /* Call DMA error callback */ - hadc->DMA_Handle->XferErrorCallback(hdma); - } -} - -/** - * @brief DMA half transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma) -{ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* Conversion complete callback */ - HAL_ADC_ConvHalfCpltCallback(hadc); -} - -/** - * @brief DMA error callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma) -{ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - hadc->State= HAL_ADC_STATE_ERROR_DMA; - /* Set ADC error code to DMA error */ - hadc->ErrorCode |= HAL_ADC_ERROR_DMA; - HAL_ADC_ErrorCallback(hadc); -} - -/** - * @} - */ - -#endif /* HAL_ADC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c deleted file mode 100644 index cce0d46..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c +++ /dev/null @@ -1,7132 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cryp.c - * @author MCD Application Team - * @brief CRYP HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Cryptography (CRYP) peripheral: - * + Initialization, de-initialization, set config and get config functions - * + DES/TDES, AES processing functions - * + DMA callback functions - * + CRYP IRQ handler management - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The CRYP HAL driver can be used in CRYP or TinyAES IP as follows: - - (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit(): - (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()or __HAL_RCC_AES_CLK_ENABLE for TinyAES IP - (##) In case of using interrupts (e.g. HAL_CRYP_Encrypt_IT()) - (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority() - (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ() - (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler() - (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_Encrypt_DMA()) - (+++) Enable the DMAx interface clock using __RCC_DMAx_CLK_ENABLE() - (+++) Configure and enable two DMA streams one for managing data transfer from - memory to peripheral (input stream) and another stream for managing data - transfer from peripheral to memory (output stream) - (+++) Associate the initialized DMA handle to the CRYP DMA handle - using __HAL_LINKDMA() - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the two DMA Streams. The output stream should have higher - priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ() - - (#)Initialize the CRYP according to the specified parameters : - (##) The data type: 1-bit, 8-bit, 16-bit or 32-bit. - (##) The key size: 128, 192 or 256. - (##) The AlgoMode DES/ TDES Algorithm ECB/CBC or AES Algorithm ECB/CBC/CTR/GCM or CCM. - (##) The initialization vector (counter). It is not used in ECB mode. - (##) The key buffer used for encryption/decryption. - (##) The Header used only in AES GCM and CCM Algorithm for authentication. - (##) The HeaderSize The size of header buffer in word. - (##) The B0 block is the first authentication block used only in AES CCM mode. - - (#)Three processing (encryption/decryption) functions are available: - (##) Polling mode: encryption and decryption APIs are blocking functions - i.e. they process the data and wait till the processing is finished, - e.g. HAL_CRYP_Encrypt & HAL_CRYP_Decrypt - (##) Interrupt mode: encryption and decryption APIs are not blocking functions - i.e. they process the data under interrupt, - e.g. HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT - (##) DMA mode: encryption and decryption APIs are not blocking functions - i.e. the data transfer is ensured by DMA, - e.g. HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA - - (#)When the processing function is called at first time after HAL_CRYP_Init() - the CRYP peripheral is configured and processes the buffer in input. - At second call, no need to Initialize the CRYP, user have to get current configuration via - HAL_CRYP_GetConfig() API, then only HAL_CRYP_SetConfig() is requested to set - new parametres, finally user can start encryption/decryption. - - (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral. - - (#)To process a single message with consecutive calls to HAL_CRYP_Encrypt() or HAL_CRYP_Decrypt() - without having to configure again the Key or the Initialization Vector between each API call, - the field KeyIVConfigSkip of the initialization structure must be set to CRYP_KEYIVCONFIG_ONCE. - Same is true for consecutive calls of HAL_CRYP_Encrypt_IT(), HAL_CRYP_Decrypt_IT(), HAL_CRYP_Encrypt_DMA() - or HAL_CRYP_Decrypt_DMA(). - - [..] - The cryptographic processor supports following standards: - (#) The data encryption standard (DES) and Triple-DES (TDES) supported only by CRYP1 IP: - (##)64-bit data block processing - (##) chaining modes supported : - (+++) Electronic Code Book(ECB) - (+++) Cipher Block Chaining (CBC) - (##) keys length supported :64-bit, 128-bit and 192-bit. - (#) The advanced encryption standard (AES) supported by CRYP1 & TinyAES IP: - (##)128-bit data block processing - (##) chaining modes supported : - (+++) Electronic Code Book(ECB) - (+++) Cipher Block Chaining (CBC) - (+++) Counter mode (CTR) - (+++) Galois/counter mode (GCM/GMAC) - (+++) Counter with Cipher Block Chaining-Message(CCM) - (##) keys length Supported : - (+++) for CRYP1 IP: 128-bit, 192-bit and 256-bit. - (+++) for TinyAES IP: 128-bit and 256-bit - - [..] This section describes the AES Galois/counter mode (GCM) supported by both CRYP1 IP: - (#) Algorithm supported : - (##) Galois/counter mode (GCM) - (##) Galois message authentication code (GMAC) :is exactly the same as - GCM algorithm composed only by an header. - (#) Four phases are performed in GCM : - (##) Init phase: IP prepares the GCM hash subkey (H) and do the IV processing - (##) Header phase: IP processes the Additional Authenticated Data (AAD), with hash - computation only. - (##) Payload phase: IP processes the plaintext (P) with hash computation + keystream - encryption + data XORing. It works in a similar way for ciphertext (C). - (##) Final phase: IP generates the authenticated tag (T) using the last block of data. - (#) structure of message construction in GCM is defined as below : - (##) 16 bytes Initial Counter Block (ICB)composed of IV and counter - (##) The authenticated header A (also knows as Additional Authentication Data AAD) - this part of the message is only authenticated, not encrypted. - (##) The plaintext message P is both authenticated and encrypted as ciphertext. - GCM standard specifies that ciphertext has same bit length as the plaintext. - (##) The last block is composed of the length of A (on 64 bits) and the length of ciphertext - (on 64 bits) - - [..] This section describe The AES Counter with Cipher Block Chaining-Message - Authentication Code (CCM) supported by both CRYP1 IP: - (#) Specific parameters for CCM : - - (##) B0 block : According to NIST Special Publication 800-38C, - The first block B0 is formatted as follows, where l(m) is encoded in - most-significant-byte first order(see below table 3) - - (+++) Q: a bit string representation of the octet length of P (plaintext) - (+++) q The octet length of the binary representation of the octet length of the payload - (+++) A nonce (N), n The octet length of the where n+q=15. - (+++) Flags: most significant octet containing four flags for control information, - (+++) t The octet length of the MAC. - (##) B1 block (header) : associated data length(a) concatenated with Associated Data (A) - the associated data length expressed in bytes (a) defined as below: - (+++) If 0 < a < 216-28, then it is encoded as [a]16, i.e. two octets - (+++) If 216-28 < a < 232, then it is encoded as 0xff || 0xfe || [a]32, i.e. six octets - (+++) If 232 < a < 264, then it is encoded as 0xff || 0xff || [a]64, i.e. ten octets - (##) CTRx block : control blocks - (+++) Generation of CTR1 from first block B0 information : - equal to B0 with first 5 bits zeroed and most significant bits storing octet - length of P also zeroed, then incremented by one ( see below Table 4) - (+++) Generation of CTR0: same as CTR1 with bit[0] set to zero. - - (#) Four phases are performed in CCM for CRYP1 IP: - (##) Init phase: IP prepares the GCM hash subkey (H) and do the IV processing - (##) Header phase: IP processes the Additional Authenticated Data (AAD), with hash - computation only. - (##) Payload phase: IP processes the plaintext (P) with hash computation + keystream - encryption + data XORing. It works in a similar way for ciphertext (C). - (##) Final phase: IP generates the authenticated tag (T) using the last block of data. - - *** Callback registration *** - ============================================= - - The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_CRYP_RegisterCallback() or HAL_CRYP_RegisterXXXCallback() - to register an interrupt callback. - - Function HAL_CRYP_RegisterCallback() allows to register following callbacks: - (+) InCpltCallback : Input FIFO transfer completed callback. - (+) OutCpltCallback : Output FIFO transfer completed callback. - (+) ErrorCallback : callback for error detection. - (+) MspInitCallback : CRYP MspInit. - (+) MspDeInitCallback : CRYP MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - Use function HAL_CRYP_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_CRYP_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) InCpltCallback : Input FIFO transfer completed callback. - (+) OutCpltCallback : Output FIFO transfer completed callback. - (+) ErrorCallback : callback for error detection. - (+) MspInitCallback : CRYP MspInit. - (+) MspDeInitCallback : CRYP MspDeInit. - - By default, after the HAL_CRYP_Init() and when the state is HAL_CRYP_STATE_RESET - all callbacks are set to the corresponding weak functions : - examples HAL_CRYP_InCpltCallback() , HAL_CRYP_OutCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak function in the HAL_CRYP_Init()/ HAL_CRYP_DeInit() only when - these callbacks are null (not registered beforehand). - if not, MspInit or MspDeInit are not null, the HAL_CRYP_Init() / HAL_CRYP_DeInit() - keep and use the user MspInit/MspDeInit functions (registered beforehand) - - Callbacks can be registered/unregistered in HAL_CRYP_STATE_READY state only. - Exception done MspInit/MspDeInit callbacks that can be registered/unregistered - in HAL_CRYP_STATE_READY or HAL_CRYP_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_CRYP_RegisterCallback() before calling HAL_CRYP_DeInit() - or HAL_CRYP_Init() function. - - When The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - Table 1. Initial Counter Block (ICB) - +-------------------------------------------------------+ - | Initialization vector (IV) | Counter | - |----------------|----------------|-----------|---------| - 127 95 63 31 0 - - - Bit Number Register Contents - ---------- --------------- ----------- - 127 ...96 CRYP_IV1R[31:0] ICB[127:96] - 95 ...64 CRYP_IV1L[31:0] B0[95:64] - 63 ... 32 CRYP_IV0R[31:0] ICB[63:32] - 31 ... 0 CRYP_IV0L[31:0] ICB[31:0], where 32-bit counter= 0x2 - - Table 2. GCM last block definition - - +-------------------------------------------------------------------+ - | Bit[0] | Bit[32] | Bit[64] | Bit[96] | - |-----------|--------------------|-----------|----------------------| - | 0x0 | Header length[31:0]| 0x0 | Payload length[31:0] | - |-----------|--------------------|-----------|----------------------| - - Table 3. B0 block - Octet Number Contents - ------------ --------- - 0 Flags - 1 ... 15-q Nonce N - 16-q ... 15 Q - - the Flags field is formatted as follows: - - Bit Number Contents - ---------- ---------------------- - 7 Reserved (always zero) - 6 Adata - 5 ... 3 (t-2)/2 - 2 ... 0 [q-1]3 - - Table 4. CTRx block - Bit Number Register Contents - ---------- --------------- ----------- - 127 ...96 CRYP_IV1R[31:0] B0[127:96], where Q length bits are set to 0, except for - bit 0 that is set to 1 - 95 ...64 CRYP_IV1L[31:0] B0[95:64] - 63 ... 32 CRYP_IV0R[31:0] B0[63:32] - 31 ... 0 CRYP_IV0L[31:0] B0[31:0], where flag bits set to 0 - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (AES) || defined (CRYP) - -/** @defgroup CRYP CRYP - * @brief CRYP HAL module driver. - * @{ - */ - - -#ifdef HAL_CRYP_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup CRYP_Private_Defines - * @{ - */ -#define CRYP_TIMEOUT_KEYPREPARATION 82U /*The latency of key preparation operation is 82 clock cycles.*/ -#define CRYP_TIMEOUT_GCMCCMINITPHASE 299U /* The latency of GCM/CCM init phase to prepare hash subkey is 299 clock cycles.*/ -#define CRYP_TIMEOUT_GCMCCMHEADERPHASE 290U /* The latency of GCM/CCM header phase is 290 clock cycles.*/ - -#define CRYP_PHASE_READY 0x00000001U /*!< CRYP peripheral is ready for initialization. */ -#define CRYP_PHASE_PROCESS 0x00000002U /*!< CRYP peripheral is in processing phase */ - -#if defined(AES) -#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode(Mode 1) */ -#define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions (Mode 2) */ -#define CRYP_OPERATINGMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption (Mode 3) */ -#define CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption only used when performing ECB and CBC decryptions (Mode 4) */ -#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ -#define CRYP_PHASE_HEADER AES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ -#define CRYP_PHASE_PAYLOAD AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ -#define CRYP_PHASE_FINAL AES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ -#else /* CRYP */ -#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ -#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0 /*!< GCM/GMAC or CCM header phase */ -#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1 /*!< GCM(/CCM) payload phase */ -#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH /*!< GCM/GMAC or CCM final phase */ -#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode */ -#define CRYP_OPERATINGMODE_DECRYPT CRYP_CR_ALGODIR /*!< Decryption */ -#endif /* End CRYP or AES */ - -/* CTR1 information to use in CCM algorithm */ -#define CRYP_CCM_CTR1_0 0x07FFFFFFU -#define CRYP_CCM_CTR1_1 0xFFFFFF00U -#define CRYP_CCM_CTR1_2 0x00000001U - - -/** - * @} - */ - - -/* Private macro -------------------------------------------------------------*/ -/** @addtogroup CRYP_Private_Macros - * @{ - */ - -#if defined(CRYP) - -#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{(__HANDLE__)->Instance->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\ - (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\ - }while(0) - -#define HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_FFLUSH) - -#else /*AES*/ -#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{(__HANDLE__)->Instance->CR &= (uint32_t)(~AES_CR_GCMPH);\ - (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\ - }while(0) -#endif /* End AES or CRYP*/ - - -/** - * @} - */ - -/* Private struct -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup CRYP_Private_Functions_prototypes - * @{ - */ - -static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr); -static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma); -static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma); -static void CRYP_DMAError(DMA_HandleTypeDef *hdma); -static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize); -static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp); -#if defined (CRYP_CR_ALGOMODE_AES_GCM)|| defined (AES) -static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp); -static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp); -static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp); -static void CRYP_Workaround(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp); -static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp); -static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp); -static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp); -#endif /* AES or GCM CCM defined*/ -static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcrypt, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp); -static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp); -static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp); -#if defined (CRYP) -static void CRYP_TDES_IT(CRYP_HandleTypeDef *hcryp); -#if defined (CRYP_CR_ALGOMODE_AES_GCM) -static HAL_StatusTypeDef CRYP_WaitOnIFEMFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -#endif /* GCM CCM defined*/ -static HAL_StatusTypeDef CRYP_WaitOnBUSYFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_WaitOnOFNEFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -static HAL_StatusTypeDef CRYP_TDES_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -#else /*AES*/ -static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); -#endif /* End CRYP or AES */ - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup CRYP_Exported_Functions CRYP Exported Functions - * @{ - */ - - -/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions. - * -@verbatim - ======================================================================================== - ##### Initialization, de-initialization and Set and Get configuration functions ##### - ======================================================================================== - [..] This section provides functions allowing to: - (+) Initialize the CRYP - (+) DeInitialize the CRYP - (+) Initialize the CRYP MSP - (+) DeInitialize the CRYP MSP - (+) configure CRYP (HAL_CRYP_SetConfig) with the specified parameters in the CRYP_ConfigTypeDef - Parameters which are configured in This section are : - (+) Key size - (+) Data Type : 32,16, 8 or 1bit - (+) AlgoMode : - - for CRYP1 IP : - ECB and CBC in DES/TDES Standard - ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard. - - for TinyAES2 IP, only ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard are supported. - (+) Get CRYP configuration (HAL_CRYP_GetConfig) from the specified parameters in the CRYP_HandleTypeDef - - -@endverbatim - * @{ - */ - - -/** - * @brief Initializes the CRYP according to the specified - * parameters in the CRYP_ConfigTypeDef and creates the associated handle. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp) -{ - /* Check the CRYP handle allocation */ - if (hcryp == NULL) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize)); - assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType)); - assert_param(IS_CRYP_ALGORITHM(hcryp->Init.Algorithm)); - assert_param(IS_CRYP_INIT(hcryp->Init.KeyIVConfigSkip)); - -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - if (hcryp->State == HAL_CRYP_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hcryp->Lock = HAL_UNLOCKED; - - hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy weak InCpltCallback */ - hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy weak OutCpltCallback */ - hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hcryp->MspInitCallback == NULL) - { - hcryp->MspInitCallback = HAL_CRYP_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware */ - hcryp->MspInitCallback(hcryp); - } -#else - if (hcryp->State == HAL_CRYP_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hcryp->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_CRYP_MspInit(hcryp); - } -#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ - - /* Set the key size(This bit field is don't care in the DES or TDES modes) data type and Algorithm */ -#if defined (CRYP) - - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_DATATYPE | CRYP_CR_KEYSIZE | CRYP_CR_ALGOMODE, - hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); - -#else /*AES*/ - - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, - hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); - -#endif /* End AES or CRYP*/ - - /* Reset Error Code field */ - hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Set the default CRYP phase */ - hcryp->Phase = CRYP_PHASE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief De-Initializes the CRYP peripheral. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp) -{ - /* Check the CRYP handle allocation */ - if (hcryp == NULL) - { - return HAL_ERROR; - } - - /* Set the default CRYP phase */ - hcryp->Phase = CRYP_PHASE_READY; - - /* Reset CrypInCount and CrypOutCount */ - hcryp->CrypInCount = 0; - hcryp->CrypOutCount = 0; - hcryp->CrypHeaderCount = 0; - - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - - if (hcryp->MspDeInitCallback == NULL) - { - hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; /* Legacy weak MspDeInit */ - } - /* DeInit the low level hardware */ - hcryp->MspDeInitCallback(hcryp); - -#else - - /* DeInit the low level hardware: CLOCK, NVIC.*/ - HAL_CRYP_MspDeInit(hcryp); - -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hcryp); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configure the CRYP according to the specified - * parameters in the CRYP_ConfigTypeDef - * @param hcryp: pointer to a CRYP_HandleTypeDef structure - * @param pConf: pointer to a CRYP_ConfigTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) -{ - /* Check the CRYP handle allocation */ - if ((hcryp == NULL) || (pConf == NULL)) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_CRYP_KEYSIZE(pConf->KeySize)); - assert_param(IS_CRYP_DATATYPE(pConf->DataType)); - assert_param(IS_CRYP_ALGORITHM(pConf->Algorithm)); - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Set CRYP parameters */ - hcryp->Init.DataType = pConf->DataType; - hcryp->Init.pKey = pConf->pKey; - hcryp->Init.Algorithm = pConf->Algorithm; - hcryp->Init.KeySize = pConf->KeySize; - hcryp->Init.pInitVect = pConf->pInitVect; - hcryp->Init.Header = pConf->Header; - hcryp->Init.HeaderSize = pConf->HeaderSize; - hcryp->Init.B0 = pConf->B0; - hcryp->Init.DataWidthUnit = pConf->DataWidthUnit; - hcryp->Init.KeyIVConfigSkip = pConf->KeyIVConfigSkip; - hcryp->Init.HeaderWidthUnit = pConf->HeaderWidthUnit; - - /* Set the key size(This bit field is don't care in the DES or TDES modes) data type, AlgoMode and operating mode*/ -#if defined (CRYP) - - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_DATATYPE | CRYP_CR_KEYSIZE | CRYP_CR_ALGOMODE, - hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); - -#else /*AES*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, - hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); - - /*clear error flags*/ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_ERR_CLEAR); - -#endif /* End AES or CRYP */ - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - - /* Reset Error Code field */ - hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Set the default CRYP phase */ - hcryp->Phase = CRYP_PHASE_READY; - - /* Return function status */ - return HAL_OK; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - return HAL_ERROR; - } -} - -/** - * @brief Get CRYP Configuration parameters in associated handle. - * @param pConf: pointer to a CRYP_ConfigTypeDef structure - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) -{ - /* Check the CRYP handle allocation */ - if ((hcryp == NULL) || (pConf == NULL)) - { - return HAL_ERROR; - } - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Get CRYP parameters */ - pConf->DataType = hcryp->Init.DataType; - pConf->pKey = hcryp->Init.pKey; - pConf->Algorithm = hcryp->Init.Algorithm; - pConf->KeySize = hcryp->Init.KeySize ; - pConf->pInitVect = hcryp->Init.pInitVect; - pConf->Header = hcryp->Init.Header ; - pConf->HeaderSize = hcryp->Init.HeaderSize; - pConf->B0 = hcryp->Init.B0; - pConf->DataWidthUnit = hcryp->Init.DataWidthUnit; - pConf->KeyIVConfigSkip = hcryp->Init.KeyIVConfigSkip; - pConf->HeaderWidthUnit = hcryp->Init.HeaderWidthUnit; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Return function status */ - return HAL_OK; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - return HAL_ERROR; - } -} -/** - * @brief Initializes the CRYP MSP. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval None - */ -__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcryp); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRYP_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitializes CRYP MSP. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval None - */ -__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcryp); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRYP_MspDeInit can be implemented in the user file - */ -} - -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User CRYP Callback - * To be used instead of the weak predefined callback - * @param hcryp cryp handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID - * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID - * @arg @ref HAL_CRYP_ERROR_CB_ID Error callback ID - * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, - pCRYP_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hcryp); - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - switch (CallbackID) - { - case HAL_CRYP_INPUT_COMPLETE_CB_ID : - hcryp->InCpltCallback = pCallback; - break; - - case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : - hcryp->OutCpltCallback = pCallback; - break; - - case HAL_CRYP_ERROR_CB_ID : - hcryp->ErrorCallback = pCallback; - break; - - case HAL_CRYP_MSPINIT_CB_ID : - hcryp->MspInitCallback = pCallback; - break; - - case HAL_CRYP_MSPDEINIT_CB_ID : - hcryp->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hcryp->State == HAL_CRYP_STATE_RESET) - { - switch (CallbackID) - { - case HAL_CRYP_MSPINIT_CB_ID : - hcryp->MspInitCallback = pCallback; - break; - - case HAL_CRYP_MSPDEINIT_CB_ID : - hcryp->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hcryp); - - return status; -} - -/** - * @brief Unregister an CRYP Callback - * CRYP callback is redirected to the weak predefined callback - * @param hcryp cryp handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID - * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID - * @arg @ref HAL_CRYP_ERROR_CB_ID Error callback ID - * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hcryp); - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - switch (CallbackID) - { - case HAL_CRYP_INPUT_COMPLETE_CB_ID : - hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy weak InCpltCallback */ - break; - - case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : - hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy weak OutCpltCallback */ - break; - - case HAL_CRYP_ERROR_CB_ID : - hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_CRYP_MSPINIT_CB_ID : - hcryp->MspInitCallback = HAL_CRYP_MspInit; - break; - - case HAL_CRYP_MSPDEINIT_CB_ID : - hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; - break; - - default : - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hcryp->State == HAL_CRYP_STATE_RESET) - { - switch (CallbackID) - { - case HAL_CRYP_MSPINIT_CB_ID : - hcryp->MspInitCallback = HAL_CRYP_MspInit; - break; - - case HAL_CRYP_MSPDEINIT_CB_ID : - hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; - break; - - default : - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hcryp); - - return status; -} -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup CRYP_Exported_Functions_Group2 Encrypt Decrypt functions - * @brief processing functions. - * -@verbatim - ============================================================================== - ##### Encrypt Decrypt functions ##### - ============================================================================== - [..] This section provides API allowing to Encrypt/Decrypt Data following - Standard DES/TDES or AES, and Algorithm configured by the user: - (+) Standard DES/TDES only supported by CRYP1 IP, below list of Algorithm supported : - - Electronic Code Book(ECB) - - Cipher Block Chaining (CBC) - (+) Standard AES supported by CRYP1 IP & TinyAES, list of Algorithm supported: - - Electronic Code Book(ECB) - - Cipher Block Chaining (CBC) - - Counter mode (CTR) - - Cipher Block Chaining (CBC) - - Counter mode (CTR) - - Galois/counter mode (GCM) - - Counter with Cipher Block Chaining-Message(CCM) - [..] Three processing functions are available: - (+) Polling mode : HAL_CRYP_Encrypt & HAL_CRYP_Decrypt - (+) Interrupt mode : HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT - (+) DMA mode : HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA - -@endverbatim - * @{ - */ - - -/** - * @brief Encryption mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Input: Pointer to the input buffer (plaintext) - * @param Size: Length of the plaintext buffer in word. - * @param Output: Pointer to the output buffer(ciphertext) - * @param Timeout: Specify Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, - uint32_t Timeout) -{ - uint32_t algo; - HAL_StatusTypeDef status; - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change state Busy */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ - hcryp->CrypInCount = 0U; - hcryp->CrypOutCount = 0U; - hcryp->pCrypInBuffPtr = Input; - hcryp->pCrypOutBuffPtr = Output; - - /* Calculate Size parameter in Byte*/ - if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) - { - hcryp->Size = Size * 4U; - } - else - { - hcryp->Size = Size; - } - -#if defined (CRYP) - /* Set Encryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_ENCRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & CRYP_CR_ALGOMODE; - - switch (algo) - { - case CRYP_DES_ECB: - case CRYP_DES_CBC: - case CRYP_TDES_ECB: - case CRYP_TDES_CBC: - - /*Set Key */ - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - if ((hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - } - - /*Set Initialization Vector (IV)*/ - if ((hcryp->Init.Algorithm == CRYP_DES_CBC) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - } - - /* Flush FIFO */ - HAL_CRYP_FIFO_FLUSH(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Statrt DES/TDES encryption process */ - status = CRYP_TDES_Process(hcryp, Timeout); - break; - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES encryption */ - status = CRYP_AES_Encrypt(hcryp, Timeout); - break; - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - case CRYP_AES_GCM: - - /* AES GCM encryption */ - status = CRYP_AESGCM_Process(hcryp, Timeout); - - break; - - case CRYP_AES_CCM: - - /* AES CCM encryption */ - status = CRYP_AESCCM_Process(hcryp, Timeout); - break; - #endif /* GCM CCM defined*/ - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - -#else /*AES*/ - - /* Set the operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & AES_CR_CHMOD; - - switch (algo) - { - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES encryption */ - status = CRYP_AES_Encrypt(hcryp, Timeout); - break; - - case CRYP_AES_GCM_GMAC: - - /* AES GCM encryption */ - status = CRYP_AESGCM_Process(hcryp, Timeout) ; - break; - - case CRYP_AES_CCM: - - /* AES CCM encryption */ - status = CRYP_AESCCM_Process(hcryp, Timeout); - break; - - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } -#endif /*end AES or CRYP */ - - if (status == HAL_OK) - { - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - return HAL_ERROR; - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Decryption mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Input: Pointer to the input buffer (ciphertext ) - * @param Size: Length of the plaintext buffer in word. - * @param Output: Pointer to the output buffer(plaintext) - * @param Timeout: Specify Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, - uint32_t Timeout) -{ - HAL_StatusTypeDef status; - uint32_t algo; - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change state Busy */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ - hcryp->CrypInCount = 0U; - hcryp->CrypOutCount = 0U; - hcryp->pCrypInBuffPtr = Input; - hcryp->pCrypOutBuffPtr = Output; - - /* Calculate Size parameter in Byte*/ - if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) - { - hcryp->Size = Size * 4U; - } - else - { - hcryp->Size = Size; - } - -#if defined (CRYP) - - /* Set Decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_DECRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & CRYP_CR_ALGOMODE; - - switch (algo) - { - case CRYP_DES_ECB: - case CRYP_DES_CBC: - case CRYP_TDES_ECB: - case CRYP_TDES_CBC: - - /*Set Key */ - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - if ((hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - } - - /*Set Initialization Vector (IV)*/ - if ((hcryp->Init.Algorithm == CRYP_DES_CBC) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - } - - /* Flush FIFO */ - HAL_CRYP_FIFO_FLUSH(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Start DES/TDES decryption process */ - status = CRYP_TDES_Process(hcryp, Timeout); - - break; - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES decryption */ - status = CRYP_AES_Decrypt(hcryp, Timeout); - break; - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - case CRYP_AES_GCM: - - /* AES GCM decryption */ - status = CRYP_AESGCM_Process(hcryp, Timeout) ; - break; - - case CRYP_AES_CCM: - - /* AES CCM decryption */ - status = CRYP_AESCCM_Process(hcryp, Timeout); - break; - #endif /* GCM CCM defined*/ - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - -#else /*AES*/ - - /* Set Decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & AES_CR_CHMOD; - - switch (algo) - { - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES decryption */ - status = CRYP_AES_Decrypt(hcryp, Timeout); - break; - - case CRYP_AES_GCM_GMAC: - - /* AES GCM decryption */ - status = CRYP_AESGCM_Process(hcryp, Timeout) ; - break; - - case CRYP_AES_CCM: - - /* AES CCM decryption */ - status = CRYP_AESCCM_Process(hcryp, Timeout); - break; - - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } -#endif /* End AES or CRYP */ - - if (status == HAL_OK) - { - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - return HAL_ERROR; - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Encryption in interrupt mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Input: Pointer to the input buffer (plaintext) - * @param Size: Length of the plaintext buffer in word - * @param Output: Pointer to the output buffer(ciphertext) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) -{ - uint32_t algo; - HAL_StatusTypeDef status = HAL_OK; - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change state Busy */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ - hcryp->CrypInCount = 0U; - hcryp->CrypOutCount = 0U; - hcryp->pCrypInBuffPtr = Input; - hcryp->pCrypOutBuffPtr = Output; - - /* Calculate Size parameter in Byte*/ - if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) - { - hcryp->Size = Size * 4U; - } - else - { - hcryp->Size = Size; - } - -#if defined (CRYP) - - /* Set encryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_ENCRYPT); - - /* algo get algorithm selected */ - algo = (hcryp->Instance->CR & CRYP_CR_ALGOMODE); - - switch (algo) - { - case CRYP_DES_ECB: - case CRYP_DES_CBC: - case CRYP_TDES_ECB: - case CRYP_TDES_CBC: - - /*Set Key */ - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - if ((hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - } - /* Set the Initialization Vector*/ - if ((hcryp->Init.Algorithm == CRYP_DES_CBC) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - } - - /* Flush FIFO */ - HAL_CRYP_FIFO_FLUSH(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); - - /* Enable CRYP to start DES/TDES process*/ - __HAL_CRYP_ENABLE(hcryp); - break; - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - status = CRYP_AES_Encrypt_IT(hcryp); - break; - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - case CRYP_AES_GCM: - - status = CRYP_AESGCM_Process_IT(hcryp) ; - break; - - case CRYP_AES_CCM: - - status = CRYP_AESCCM_Process_IT(hcryp); - break; - #endif /* GCM CCM defined*/ - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } - -#else /* AES */ - - /* Set encryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & AES_CR_CHMOD; - - switch (algo) - { - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES encryption */ - status = CRYP_AES_Encrypt_IT(hcryp); - break; - - case CRYP_AES_GCM_GMAC: - - /* AES GCM encryption */ - status = CRYP_AESGCM_Process_IT(hcryp) ; - break; - - case CRYP_AES_CCM: - - /* AES CCM encryption */ - status = CRYP_AESCCM_Process_IT(hcryp); - break; - - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } -#endif /*end AES or CRYP*/ - - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - status = HAL_ERROR; - } - - /* Return function status */ - return status; -} - -/** - * @brief Decryption in itnterrupt mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Input: Pointer to the input buffer (ciphertext ) - * @param Size: Length of the plaintext buffer in word. - * @param Output: Pointer to the output buffer(plaintext) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) -{ - uint32_t algo; - HAL_StatusTypeDef status = HAL_OK; - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change state Busy */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ - hcryp->CrypInCount = 0U; - hcryp->CrypOutCount = 0U; - hcryp->pCrypInBuffPtr = Input; - hcryp->pCrypOutBuffPtr = Output; - - /* Calculate Size parameter in Byte*/ - if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) - { - hcryp->Size = Size * 4U; - } - else - { - hcryp->Size = Size; - } - -#if defined (CRYP) - - /* Set decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_DECRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & CRYP_CR_ALGOMODE; - - switch (algo) - { - case CRYP_DES_ECB: - case CRYP_DES_CBC: - case CRYP_TDES_ECB: - case CRYP_TDES_CBC: - - /*Set Key */ - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - if ((hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - } - - /* Set the Initialization Vector*/ - if ((hcryp->Init.Algorithm == CRYP_DES_CBC) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - } - /* Flush FIFO */ - HAL_CRYP_FIFO_FLUSH(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); - - /* Enable CRYP and start DES/TDES process*/ - __HAL_CRYP_ENABLE(hcryp); - - break; - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES decryption */ - status = CRYP_AES_Decrypt_IT(hcryp); - break; - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - case CRYP_AES_GCM: - - /* AES GCM decryption */ - status = CRYP_AESGCM_Process_IT(hcryp) ; - break; - - case CRYP_AES_CCM: - - /* AES CCMdecryption */ - status = CRYP_AESCCM_Process_IT(hcryp); - break; - #endif /* GCM CCM defined*/ - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } - -#else /*AES*/ - - /* Set decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & AES_CR_CHMOD; - - switch (algo) - { - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES decryption */ - status = CRYP_AES_Decrypt_IT(hcryp); - break; - - case CRYP_AES_GCM_GMAC: - - /* AES GCM decryption */ - status = CRYP_AESGCM_Process_IT(hcryp) ; - break; - - case CRYP_AES_CCM: - - /* AES CCM decryption */ - status = CRYP_AESCCM_Process_IT(hcryp); - break; - - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } -#endif /* End AES or CRYP */ - - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - status = HAL_ERROR; - } - - /* Return function status */ - return status; -} - -/** - * @brief Encryption in DMA mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Input: Pointer to the input buffer (plaintext) - * @param Size: Length of the plaintext buffer in word. - * @param Output: Pointer to the output buffer(ciphertext) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) -{ - uint32_t algo; - HAL_StatusTypeDef status = HAL_OK; - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Change state Busy */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ - hcryp->CrypInCount = 0U; - hcryp->CrypOutCount = 0U; - hcryp->pCrypInBuffPtr = Input; - hcryp->pCrypOutBuffPtr = Output; - - /* Calculate Size parameter in Byte*/ - if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) - { - hcryp->Size = Size * 4U; - } - else - { - hcryp->Size = Size; - } - -#if defined (CRYP) - - /* Set encryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_ENCRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & CRYP_CR_ALGOMODE; - - switch (algo) - { - case CRYP_DES_ECB: - case CRYP_DES_CBC: - case CRYP_TDES_ECB: - case CRYP_TDES_CBC: - - /*Set Key */ - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - if ((hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - } - - /* Set the Initialization Vector*/ - if ((hcryp->Init.Algorithm == CRYP_DES_CBC) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - } - - /* Flush FIFO */ - HAL_CRYP_FIFO_FLUSH(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Start DMA process transfer for DES/TDES */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), ((uint16_t)(hcryp->Size) / 4U), - (uint32_t)(hcryp->pCrypOutBuffPtr)); - break; - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - - if (DoKeyIVConfig == 1U) - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the Initialization Vector*/ - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); - } - } /* if (DoKeyIVConfig == 1U) */ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Start DMA process transfer for AES */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), ((uint16_t)(hcryp->Size) / 4U), - (uint32_t)(hcryp->pCrypOutBuffPtr)); - break; - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - case CRYP_AES_GCM: - /* AES GCM encryption */ - status = CRYP_AESGCM_Process_DMA(hcryp) ; - break; - - case CRYP_AES_CCM: - /* AES CCM encryption */ - status = CRYP_AESCCM_Process_DMA(hcryp); - break; - #endif /* GCM CCM defined*/ - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } - -#else /*AES*/ - /* Set encryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & AES_CR_CHMOD; - - switch (algo) - { - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - - if (DoKeyIVConfig == 1U) - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the Initialization Vector*/ - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); - } - } /* if (DoKeyIVConfig == 1U) */ - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Start DMA process transfer for AES */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); - break; - - case CRYP_AES_GCM_GMAC: - /* AES GCM encryption */ - status = CRYP_AESGCM_Process_DMA(hcryp) ; - break; - - case CRYP_AES_CCM: - /* AES CCM encryption */ - status = CRYP_AESCCM_Process_DMA(hcryp); - break; - - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } -#endif /* End AES or CRYP */ - - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - status = HAL_ERROR; - } - - /* Return function status */ - return status; -} - -/** - * @brief Decryption in DMA mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Input: Pointer to the input buffer (ciphertext ) - * @param Size: Length of the plaintext buffer in word - * @param Output: Pointer to the output buffer(plaintext) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) -{ - uint32_t algo; - HAL_StatusTypeDef status = HAL_OK; - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - - /* Change state Busy */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ - hcryp->CrypInCount = 0U; - hcryp->CrypOutCount = 0U; - hcryp->pCrypInBuffPtr = Input; - hcryp->pCrypOutBuffPtr = Output; - - /* Calculate Size parameter in Byte*/ - if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) - { - hcryp->Size = Size * 4U; - } - else - { - hcryp->Size = Size; - } - -#if defined (CRYP) - - /* Set decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_DECRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & CRYP_CR_ALGOMODE; - - switch (algo) - { - case CRYP_DES_ECB: - case CRYP_DES_CBC: - case CRYP_TDES_ECB: - case CRYP_TDES_CBC: - - /*Set Key */ - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - if ((hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - } - - /* Set the Initialization Vector*/ - if ((hcryp->Init.Algorithm == CRYP_DES_CBC) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - } - - /* Flush FIFO */ - HAL_CRYP_FIFO_FLUSH(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Start DMA process transfer for DES/TDES */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), ((uint16_t)(hcryp->Size) / 4U), - (uint32_t)(hcryp->pCrypOutBuffPtr)); - break; - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES decryption */ - status = CRYP_AES_Decrypt_DMA(hcryp); - break; - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - case CRYP_AES_GCM: - /* AES GCM decryption */ - status = CRYP_AESGCM_Process_DMA(hcryp) ; - break; - - case CRYP_AES_CCM: - /* AES CCM decryption */ - status = CRYP_AESCCM_Process_DMA(hcryp); - break; - #endif /* GCM CCM defined*/ - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } - -#else /*AES*/ - - /* Set decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); - - /* algo get algorithm selected */ - algo = hcryp->Instance->CR & AES_CR_CHMOD; - - switch (algo) - { - - case CRYP_AES_ECB: - case CRYP_AES_CBC: - case CRYP_AES_CTR: - - /* AES decryption */ - status = CRYP_AES_Decrypt_DMA(hcryp); - break; - - case CRYP_AES_GCM_GMAC: - /* AES GCM decryption */ - status = CRYP_AESGCM_Process_DMA(hcryp) ; - break; - - case CRYP_AES_CCM: - /* AES CCM decryption */ - status = CRYP_AESCCM_Process_DMA(hcryp); - break; - - default: - hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - status = HAL_ERROR; - break; - } -#endif /* End AES or CRYP */ - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - status = HAL_ERROR; - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup CRYP_Exported_Functions_Group3 CRYP IRQ handler management - * @brief CRYP IRQ handler. - * -@verbatim - ============================================================================== - ##### CRYP IRQ handler management ##### - ============================================================================== -[..] This section provides CRYP IRQ handler and callback functions. - (+) HAL_CRYP_IRQHandler CRYP interrupt request - (+) HAL_CRYP_InCpltCallback input data transfer complete callback - (+) HAL_CRYP_OutCpltCallback output data transfer complete callback - (+) HAL_CRYP_ErrorCallback CRYP error callback - (+) HAL_CRYP_GetState return the CRYP state - (+) HAL_CRYP_GetError return the CRYP error code -@endverbatim - * @{ - */ - -/** - * @brief This function handles cryptographic interrupt request. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval None - */ -void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) -{ - -#if defined (CRYP) - - uint32_t itstatus = hcryp->Instance->MISR; - - if ((itstatus & (CRYP_IT_INI | CRYP_IT_OUTI)) != 0U) - { - if ((hcryp->Init.Algorithm == CRYP_DES_ECB) || (hcryp->Init.Algorithm == CRYP_DES_CBC) - || (hcryp->Init.Algorithm == CRYP_TDES_ECB) || (hcryp->Init.Algorithm == CRYP_TDES_CBC)) - { - CRYP_TDES_IT(hcryp); /* DES or TDES*/ - } - else if ((hcryp->Init.Algorithm == CRYP_AES_ECB) || (hcryp->Init.Algorithm == CRYP_AES_CBC) - || (hcryp->Init.Algorithm == CRYP_AES_CTR)) - { - CRYP_AES_IT(hcryp); /*AES*/ - } - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - else if ((hcryp->Init.Algorithm == CRYP_AES_GCM) || (hcryp->Init.Algorithm == CRYP_CR_ALGOMODE_AES_CCM)) - { - /* if header phase */ - if ((hcryp->Instance->CR & CRYP_PHASE_HEADER) == CRYP_PHASE_HEADER) - { - CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); - } - else /* if payload phase */ - { - CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); - } - } - #endif /* GCM CCM defined*/ - else - { - /* Nothing to do */ - } - } - -#else /*AES*/ - if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_CCF) != RESET) - { - if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_CCFIE) != RESET) - { - - /* Clear computation complete flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - - /* if header phase */ - if ((hcryp->Instance->CR & CRYP_PHASE_HEADER) == CRYP_PHASE_HEADER) - { - CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); - } - else /* if payload phase */ - { - CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); - } - } - else if (hcryp->Init.Algorithm == CRYP_AES_CCM) - { - /* if header phase */ - if (hcryp->Init.HeaderSize >= hcryp->CrypHeaderCount) - { - CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); - } - else /* if payload phase */ - { - CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); - } - } - else /* AES Algorithm ECB,CBC or CTR*/ - { - CRYP_AES_IT(hcryp); - } - } - } - /* Check if error occurred */ - if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_ERRIE) != RESET) - { - /* If write Error occurred */ - if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_WRERR) != RESET) - { - hcryp->ErrorCode |= HAL_CRYP_ERROR_WRITE; - } - /* If read Error occurred */ - if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_RDERR) != RESET) - { - hcryp->ErrorCode |= HAL_CRYP_ERROR_READ; - } - } -#endif /* End AES or CRYP */ -} - -/** - * @brief Return the CRYP error code. - * @param hcryp : pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for the CRYP IP - * @retval CRYP error code - */ -uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp) -{ - return hcryp->ErrorCode; -} - -/** - * @brief Returns the CRYP state. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @retval HAL state - */ -HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp) -{ - return hcryp->State; -} - -/** - * @brief Input FIFO transfer completed callback. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @retval None - */ -__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcryp); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRYP_InCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Output FIFO transfer completed callback. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @retval None - */ -__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcryp); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRYP_OutCpltCallback can be implemented in the user file - */ -} - -/** - * @brief CRYP error callback. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @retval None - */ -__weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcryp); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_CRYP_ErrorCallback could be implemented in the user file - */ -} -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup CRYP_Private_Functions - * @{ - */ - -#if defined (CRYP) - -/** - * @brief Encryption in ECB/CBC Algorithm with DES/TDES standard. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Timeout: specify Timeout value - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_TDES_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t temp[2]; /* Temporary CrypOutBuff */ - uint16_t incount; /* Temporary CrypInCount Value */ - uint16_t outcount; /* Temporary CrypOutCount Value */ - uint32_t i; - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - /*Start processing*/ - while ((hcryp->CrypInCount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) - { - /* Temporary CrypInCount Value */ - incount = hcryp->CrypInCount; - /* Write plain data and get cipher data */ - if (((hcryp->Instance->SR & CRYP_FLAG_IFNF) != 0x0U) && (incount < (hcryp->Size / 4U))) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - - /* Wait for OFNE flag to be raised */ - if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state & errorCode*/ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - if (((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) && (outcount < (hcryp->Size / 4U))) - { - /* Read the output block from the Output FIFO and put them in temporary Buffer then get CrypOutBuff from temporary buffer */ - for (i = 0U; i < 2U; i++) - { - temp[i] = hcryp->Instance->DOUT; - } - i = 0U; - while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 2U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - } - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - } - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief CRYP block input/output data handling under interruption with DES/TDES standard. - * @note The function is called under interruption only, once - * interruptions have been enabled by CRYP_Decrypt_IT() and CRYP_Encrypt_IT(). - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @retval none - */ -static void CRYP_TDES_IT(CRYP_HandleTypeDef *hcryp) -{ - uint32_t temp[2]; /* Temporary CrypOutBuff */ - uint32_t i; - - if (hcryp->State == HAL_CRYP_STATE_BUSY) - { - if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI) != 0x0U) - { - if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_INRIS) != 0x0U) - { - /* Write input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - - if (hcryp->CrypInCount == ((uint16_t)(hcryp->Size) / 4U)) - { - /* Disable interruption */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); - /* Call the input data transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - } - if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI) != 0x0U) - { - if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_OUTRIS) != 0x0U) - { - /* Read the output block from the Output FIFO and put them in temporary Buffer then get CrypOutBuff from temporary buffer */ - for (i = 0U; i < 2U; i++) - { - temp[i] = hcryp->Instance->DOUT; - } - i = 0U; - while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 2U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - if (hcryp->CrypOutCount == ((uint16_t)(hcryp->Size) / 4U)) - { - /* Disable interruption */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI); - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - /* Call output transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - } - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } -} - -#endif /* CRYP */ - -/** - * @brief Encryption in ECB/CBC & CTR Algorithm with AES Standard - * @param hcryp: pointer to a CRYP_HandleTypeDef structure - * @param Timeout: specify Timeout value - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint16_t outcount; /* Temporary CrypOutCount Value */ - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - - if (DoKeyIVConfig == 1U) - { - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - /* Set the Initialization Vector*/ -#if defined (AES) - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#else /* CRYP */ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#endif /* End AES or CRYP */ - } - } /* if (DoKeyIVConfig == 1U) */ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - while ((hcryp->CrypInCount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) - { - /* Write plain Ddta and get cipher data */ - CRYP_AES_ProcessData(hcryp, Timeout); - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - } - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Encryption in ECB/CBC & CTR mode with AES Standard using interrupt mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp) -{ - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - - if (DoKeyIVConfig == 1U) - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - /* Set the Initialization Vector*/ -#if defined (AES) - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); - -#else /* CRYP */ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#endif /* End AES or CRYP */ - } - } /* if (DoKeyIVConfig == 1U) */ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - if (hcryp->Size != 0U) - { -#if defined (AES) - - /* Enable computation complete flag and error interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - -#else /* CRYP */ - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - -#endif /* End AES or CRYP */ - } - else - { - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Decryption in ECB/CBC & CTR mode with AES Standard - * @param hcryp: pointer to a CRYP_HandleTypeDef structure - * @param Timeout: Specify Timeout value - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint16_t outcount; /* Temporary CrypOutCount Value */ - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - - if (DoKeyIVConfig == 1U) - { - /* Key preparation for ECB/CBC */ - if (hcryp->Init.Algorithm != CRYP_AES_CTR) - { -#if defined (AES) - if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 Key preparation*/ - { - /* Set key preparation for decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Wait for CCF flag to be raised */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state & error code*/ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Return to decryption operating mode(Mode 3)*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); - } - else /*Mode 4 : decryption & Key preparation*/ - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set decryption & Key preparation operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); - } -#else /* CRYP */ - /* change ALGOMODE to key preparation for decryption*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_CR_ALGOMODE_AES_KEY); - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Wait for BUSY flag to be raised */ - if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Turn back to ALGOMODE of the configuration */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, hcryp->Init.Algorithm); - -#endif /* End AES or CRYP */ - } - else /*Algorithm CTR */ - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - } - - /* Set IV */ - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - /* Set the Initialization Vector*/ -#if defined (AES) - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#else /* CRYP */ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#endif /* End AES or CRYP */ - } - } /* if (DoKeyIVConfig == 1U) */ - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - while ((hcryp->CrypInCount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) - { - /* Write plain data and get cipher data */ - CRYP_AES_ProcessData(hcryp, Timeout); - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - } - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Return function status */ - return HAL_OK; -} -/** - * @brief Decryption in ECB/CBC & CTR mode with AES Standard using interrupt mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp) -{ - __IO uint32_t count = 0U; - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - - if (DoKeyIVConfig == 1U) - { - /* Key preparation for ECB/CBC */ - if (hcryp->Init.Algorithm != CRYP_AES_CTR) - { -#if defined (AES) - if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 Key preparation*/ - { - /* Set key preparation for decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Wait for CCF flag to be raised */ - count = CRYP_TIMEOUT_KEYPREPARATION; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Return to decryption operating mode(Mode 3)*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); - } - else /*Mode 4 : decryption & key preparation*/ - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set decryption & key preparation operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); - } -#else /* CRYP */ - - /* change ALGOMODE to key preparation for decryption*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_CR_ALGOMODE_AES_KEY); - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Wait for BUSY flag to be raised */ - count = CRYP_TIMEOUT_KEYPREPARATION; - do - { - count-- ; - if (count == 0U) - { - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY)); - - /* Turn back to ALGOMODE of the configuration */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, hcryp->Init.Algorithm); - -#endif /* End AES or CRYP */ - } - - else /*Algorithm CTR */ - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - } - - /* Set IV */ - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - /* Set the Initialization Vector*/ -#if defined (AES) - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#else /* CRYP */ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#endif /* End AES or CRYP */ - } - } /* if (DoKeyIVConfig == 1U) */ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - if (hcryp->Size != 0U) - { - -#if defined (AES) - - /* Enable computation complete flag and error interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - -#else /* CRYP */ - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - -#endif /* End AES or CRYP */ - } - else - { - /* Process locked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - } - - /* Return function status */ - return HAL_OK; -} -/** - * @brief Decryption in ECB/CBC & CTR mode with AES Standard using DMA mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp) -{ - __IO uint32_t count = 0U; - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - } - } - if (DoKeyIVConfig == 1U) - { - /* Key preparation for ECB/CBC */ - if (hcryp->Init.Algorithm != CRYP_AES_CTR) - { -#if defined (AES) - if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 key preparation*/ - { - /* Set key preparation for decryption operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Wait for CCF flag to be raised */ - count = CRYP_TIMEOUT_KEYPREPARATION; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Return to decryption operating mode(Mode 3)*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); - } - else /*Mode 4 : decryption & key preparation*/ - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set decryption & Key preparation operating mode*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); - } -#else /* CRYP */ - /* change ALGOMODE to key preparation for decryption*/ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_CR_ALGOMODE_AES_KEY); - - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Wait for BUSY flag to be raised */ - count = CRYP_TIMEOUT_KEYPREPARATION; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY)); - - /* Turn back to ALGOMODE of the configuration */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, hcryp->Init.Algorithm); - -#endif /* End AES or CRYP */ - } - else /*Algorithm CTR */ - { - /* Set the Key*/ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - } - - if (hcryp->Init.Algorithm != CRYP_AES_ECB) - { - /* Set the Initialization Vector*/ -#if defined (AES) - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#else /* CRYP */ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); -#endif /* End AES or CRYP */ - } - } /* if (DoKeyIVConfig == 1U) */ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - if (hcryp->Size != 0U) - { - /* Set the input and output addresses and start DMA transfer */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - } - - /* Return function status */ - return HAL_OK; -} - - -/** - * @brief DMA CRYP input data process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) -{ - CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit - in the DMACR register */ -#if defined (CRYP) - hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN); - -#else /* AES */ - CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); - - /* TinyAES2, No output on CCM AES, unlock should be done when input data process complete */ - if ((hcryp->Init.Algorithm & CRYP_AES_CCM) == CRYP_AES_CCM) - { - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Change the CRYP state to ready */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - } -#endif /* End AES or CRYP */ - - /* Call input data transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA CRYP output data process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) -{ - CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable the DMA transfer for output FIFO request by resetting - the DOEN bit in the DMACR register */ - -#if defined (CRYP) - - hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN); - #if defined (CRYP_CR_ALGOMODE_AES_GCM) - if ((hcryp->Init.Algorithm & CRYP_AES_GCM) != CRYP_AES_GCM) - { - /* Disable CRYP (not allowed in GCM)*/ - __HAL_CRYP_DISABLE(hcryp); - } - - #else /*NO GCM CCM */ - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - #endif /* GCM CCM defined*/ -#else /* AES */ - - CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAOUTEN); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - if ((hcryp->Init.Algorithm & CRYP_AES_GCM_GMAC) != CRYP_AES_GCM_GMAC) - { - /* Disable CRYP (not allowed in GCM)*/ - __HAL_CRYP_DISABLE(hcryp); - } -#endif /* End AES or CRYP */ - - /* Change the CRYP state to ready */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - /* Call output data transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA CRYP communication error callback. - * @param hdma: DMA handle - * @retval None - */ -static void CRYP_DMAError(DMA_HandleTypeDef *hdma) -{ - CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* DMA error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; - -#if defined (AES) - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - -#endif /* AES */ - - /* Call error callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ -} - -/** - * @brief Set the DMA configuration and start the DMA transfer - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param inputaddr: address of the input buffer - * @param Size: size of the input buffer, must be a multiple of 16. - * @param outputaddr: address of the output buffer - * @retval None - */ -static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr) -{ - /* Set the CRYP DMA transfer complete callback */ - hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; - - /* Set the DMA input error callback */ - hcryp->hdmain->XferErrorCallback = CRYP_DMAError; - - /* Set the CRYP DMA transfer complete callback */ - hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt; - - /* Set the DMA output error callback */ - hcryp->hdmaout->XferErrorCallback = CRYP_DMAError; - -#if defined (CRYP) - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - - /* Enable the input DMA Stream */ - if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DIN, Size) != HAL_OK) - { - /* DMA error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; - - /* Call error callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - /* Enable the output DMA Stream */ - if (HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size) != HAL_OK) - { - /* DMA error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; - - /* Call error callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - /* Enable In/Out DMA request */ - hcryp->Instance->DMACR = CRYP_DMACR_DOEN | CRYP_DMACR_DIEN; - -#else /* AES */ - - if (((hcryp->Init.Algorithm & CRYP_AES_GCM_GMAC) != CRYP_AES_GCM_GMAC) - && ((hcryp->Init.Algorithm & CRYP_AES_CCM) != CRYP_AES_CCM)) - { - /* Enable CRYP (not allowed in GCM & CCM)*/ - __HAL_CRYP_ENABLE(hcryp); - } - - /* Enable the DMA input stream */ - if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size) != HAL_OK) - { - /* DMA error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; - - /* Call error callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - /* Enable the DMA output stream */ - if (HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUTR, outputaddr, Size) != HAL_OK) - { - /* DMA error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; - - /* Call error callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - /*AES2v1.1.1 : CCM authentication : no init phase, only header and final phase */ - /* Enable In and Out DMA requests */ - if ((hcryp->Init.Algorithm & CRYP_AES_CCM) == CRYP_AES_CCM) - { - /* Enable only In DMA requests for CCM*/ - SET_BIT(hcryp->Instance->CR, (AES_CR_DMAINEN)); - } - else - { - /* Enable In and Out DMA requests */ - SET_BIT(hcryp->Instance->CR, (AES_CR_DMAINEN | AES_CR_DMAOUTEN)); - } -#endif /* End AES or CRYP */ -} - -/** - * @brief Process Data: Write Input data in polling mode and used in AES functions. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Timeout: Specify Timeout value - * @retval None - */ -static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - - uint32_t temp[4]; /* Temporary CrypOutBuff */ - uint32_t i; -#if defined (CRYP) - uint16_t incount; /* Temporary CrypInCount Value */ - uint16_t outcount; /* Temporary CrypOutCount Value */ -#endif - -#if defined (CRYP) - - /*Temporary CrypOutCount Value*/ - incount = hcryp->CrypInCount; - - if (((hcryp->Instance->SR & CRYP_FLAG_IFNF) != 0x0U) && (incount < (hcryp->Size / 4U))) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - - /* Wait for OFNE flag to be raised */ - if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state & error code*/ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - if (((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) && (outcount < (hcryp->Size / 4U))) - { - /* Read the output block from the Output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUT; - } - i = 0U; - while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - } - -#else /* AES */ - - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - - /* Wait for CCF flag to be raised */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/ - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUTR; - } - i = 0U; - while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } -#endif /* End AES or CRYP */ -} - -/** - * @brief Handle CRYP block input/output data handling under interruption. - * @note The function is called under interruption only, once - * interruptions have been enabled by HAL_CRYP_Encrypt_IT or HAL_CRYP_Decrypt_IT. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @retval HAL status - */ -static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp) -{ - uint32_t temp[4]; /* Temporary CrypOutBuff */ - uint32_t i; -#if defined (CRYP) - uint16_t incount; /* Temporary CrypInCount Value */ - uint16_t outcount; /* Temporary CrypOutCount Value */ -#endif - - if (hcryp->State == HAL_CRYP_STATE_BUSY) - { -#if defined (CRYP) - - /*Temporary CrypOutCount Value*/ - incount = hcryp->CrypInCount; - if (((hcryp->Instance->SR & CRYP_FLAG_IFNF) != 0x0U) && (incount < (hcryp->Size / 4U))) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - if (hcryp->CrypInCount == ((uint16_t)(hcryp->Size) / 4U)) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); - - /* Call the input data transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - if (((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) && (outcount < (hcryp->Size / 4U))) - { - /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUT; - } - i = 0U; - while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - if (hcryp->CrypOutCount == ((uint16_t)(hcryp->Size) / 4U)) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Call Output transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - -#else /*AES*/ - - /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/ - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUTR; - } - i = 0U; - while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - - if (hcryp->CrypOutCount == (hcryp->Size / 4U)) - { - /* Disable Computation Complete flag and errors interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - - /* Call Output transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - else - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - - if (hcryp->CrypInCount == (hcryp->Size / 4U)) - { - /* Call Input transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } -#endif /* End AES or CRYP */ - - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Writes Key in Key registers. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param KeySize: Size of Key - * @retval None - */ -static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize) -{ -#if defined (CRYP) - - switch (KeySize) - { - case CRYP_KEYSIZE_256B: - hcryp->Instance->K0LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K0RR = *(uint32_t *)(hcryp->Init.pKey + 1); - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 5); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 6); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 7); - break; - case CRYP_KEYSIZE_192B: - hcryp->Instance->K1LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); - break; - case CRYP_KEYSIZE_128B: - hcryp->Instance->K2LR = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->K2RR = *(uint32_t *)(hcryp->Init.pKey + 1); - hcryp->Instance->K3LR = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->K3RR = *(uint32_t *)(hcryp->Init.pKey + 3); - - break; - default: - break; - } -#else /*AES*/ - switch (KeySize) - { - case CRYP_KEYSIZE_256B: - hcryp->Instance->KEYR7 = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->KEYR6 = *(uint32_t *)(hcryp->Init.pKey + 1); - hcryp->Instance->KEYR5 = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->KEYR4 = *(uint32_t *)(hcryp->Init.pKey + 3); - hcryp->Instance->KEYR3 = *(uint32_t *)(hcryp->Init.pKey + 4); - hcryp->Instance->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 5); - hcryp->Instance->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 6); - hcryp->Instance->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 7); - break; - case CRYP_KEYSIZE_128B: - hcryp->Instance->KEYR3 = *(uint32_t *)(hcryp->Init.pKey); - hcryp->Instance->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 1); - hcryp->Instance->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 2); - hcryp->Instance->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 3); - - break; - default: - break; - } -#endif /* End AES or CRYP */ -} - -#if defined (CRYP_CR_ALGOMODE_AES_GCM)|| defined (AES) -/** - * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t tickstart; - uint32_t wordsize = (uint32_t)(hcryp->Size) / 4U ; - uint16_t outcount; /* Temporary CrypOutCount Value */ - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ - } - } - else - { - hcryp->SizesSum = hcryp->Size; - } - - if (DoKeyIVConfig == 1U) - { - /* Reset CrypHeaderCount */ - hcryp->CrypHeaderCount = 0U; - - /****************************** Init phase **********************************/ - - CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - -#if defined(CRYP) - - /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /*Wait for the CRYPEN bit to be cleared*/ - while ((hcryp->Instance->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - -#else /* AES */ - /* Workaround 1 : only AES. - Datatype configuration must be 32 bits during Init phase. Only, after Init, and before re - enabling the IP, datatype different from 32 bits can be configured.*/ - /* Select DATATYPE 32 */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, CRYP_DATATYPE_32B); - - /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /* just wait for hash computation */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked & return error */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - -#endif /* End AES or CRYP */ - - /************************ Header phase *************************************/ - - if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) - { - return HAL_ERROR; - } - - /*************************Payload phase ************************************/ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - -#if defined(CRYP) - - /* Disable the CRYP peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - -#else /* AES */ - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - -#endif /* End AES or CRYP */ - } /* if (DoKeyIVConfig == 1U) */ - - if ((hcryp->Size % 16U) != 0U) - { - /* recalculate wordsize */ - wordsize = ((wordsize / 4U) * 4U) ; - } - - /* Get tick */ - tickstart = HAL_GetTick(); - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - /* Write input data and get output Data */ - while ((hcryp->CrypInCount < wordsize) && (outcount < wordsize)) - { - /* Write plain data and get cipher data */ - CRYP_AES_ProcessData(hcryp, Timeout); - - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state & error code */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - if ((hcryp->Size % 16U) != 0U) - { - /* Workaround 2 : CRYP1 & AES generates correct TAG for GCM mode only when input block size is multiple of - 128 bits. If lthe size of the last block of payload is inferior to 128 bits, when GCM encryption - is selected, then the TAG message will be wrong.*/ - CRYP_Workaround(hcryp, Timeout); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG in interrupt mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) -{ - __IO uint32_t count = 0U; - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ -#if defined(AES) - uint32_t loopcounter; - uint32_t lastwordsize; - uint32_t npblb; -#endif /* AES */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ - } - } - else - { - hcryp->SizesSum = hcryp->Size; - } - - /* Configure Key, IV and process message (header and payload) */ - if (DoKeyIVConfig == 1U) - { - /* Reset CrypHeaderCount */ - hcryp->CrypHeaderCount = 0U; - - /******************************* Init phase *********************************/ - - CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - -#if defined(CRYP) - /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Wait for the CRYPEN bit to be cleared*/ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while ((hcryp->Instance->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN); - -#else /* AES */ - - /* Workaround 1 : only AES - Datatype configuration must be 32 bits during INIT phase. Only, after INIT, and before re - enabling the IP, datatype different from 32 bits can be configured.*/ - /* Select DATATYPE 32 */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, CRYP_DATATYPE_32B); - - /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /* just wait for hash computation */ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - -#endif /* End AES or CRYP */ - - /***************************** Header phase *********************************/ - -#if defined(CRYP) - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - -#else /* AES */ - - /* Workaround 1: only AES , before re-enabling the IP, datatype can be configured*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable computation complete flag and error interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - if (hcryp->Init.HeaderSize == 0U) /*header phase is skipped*/ - { - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Select payload phase once the header phase is performed */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); - - /* Write the payload Input block in the IN FIFO */ - if (hcryp->Size == 0U) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } - else if (hcryp->Size >= 16U) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - if (hcryp->CrypInCount == (hcryp->Size / 4U)) - { - /* Call Input transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - else /* Size < 16Bytes : first block is the last block*/ - { - /* Workaround not implemented*/ - /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: - Workaround is implemented in polling mode, so if last block of - payload <128bit don't use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ - - /* Compute the number of padding bytes in last block of payload */ - npblb = 16U - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - - /* last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (loopcounter < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } - } - else if ((hcryp->Init.HeaderSize) < 4U) - { - for (loopcounter = 0U; loopcounter < hcryp->Init.HeaderSize ; loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - while (loopcounter < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - /* Call Input transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - else if ((hcryp->Init.HeaderSize) >= 4U) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - } - else - { - /* Nothing to do */ - } - -#endif /* End AES or CRYP */ - } /* end of if (DoKeyIVConfig == 1U) */ - - /* Return function status */ - return HAL_OK; -} - - -/** - * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG using DMA - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp) -{ - __IO uint32_t count = 0U; - uint32_t wordsize; - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ - } - } - else - { - hcryp->SizesSum = hcryp->Size; - } - - if (DoKeyIVConfig == 1U) - { - /* Reset CrypHeaderCount */ - hcryp->CrypHeaderCount = 0U; - - /*************************** Init phase ************************************/ - - CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - -#if defined(CRYP) - /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ - hcryp->Instance->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Wait for the CRYPEN bit to be cleared*/ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while ((hcryp->Instance->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN); - -#else /* AES */ - - /*Workaround 1 : only AES - Datatype configuration must be 32 bits during Init phase. Only, after Init, and before re - enabling the IP, datatype different from 32 bits can be configured.*/ - /* Select DATATYPE 32 */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, CRYP_DATATYPE_32B); - - /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ - hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); - hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); - hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); - hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /* just wait for hash computation */ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - -#endif /* End AES or CRYP */ - - /************************ Header phase *************************************/ - - if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) - { - return HAL_ERROR; - } - - /************************ Payload phase ************************************/ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - -#if defined(CRYP) - - /* Disable the CRYP peripheral */ - __HAL_CRYP_DISABLE(hcryp); - -#endif /* CRYP */ - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - } /* if (DoKeyIVConfig == 1U) */ - - if (hcryp->Size != 0U) - { - /* CRYP1 IP V < 2.2.1 Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: - Workaround is implemented in polling mode, so if last block of - payload <128bit don't use DMA mode otherwise TAG is incorrectly generated . */ - /* Set the input and output addresses and start DMA transfer */ - if ((hcryp->Size % 16U) == 0U) - { - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - else /*to compute last word<128bits, otherwise it will not be encrypted/decrypted */ - { - wordsize = (uint32_t)(hcryp->Size) + (16U - ((uint32_t)(hcryp->Size) % 16U)) ; - - /* Set the input and output addresses and start DMA transfer, pCrypOutBuffPtr size should be %4 */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), ((uint16_t)wordsize / 4U), - (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - } - else - { - /* Process unLocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state and phase */ - hcryp->State = HAL_CRYP_STATE_READY; - } - - /* Return function status */ - return HAL_OK; -} - - -/** - * @brief AES CCM encryption/decryption processing in polling mode - * for TinyAES IP, no encrypt/decrypt performed, only authentication preparation. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t tickstart; - uint32_t wordsize = (uint32_t)(hcryp->Size) / 4U; - uint16_t outcount; /* Temporary CrypOutCount Value */ - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ -#if defined(AES) - uint32_t loopcounter; - uint32_t npblb; - uint32_t lastwordsize; -#endif /* AES */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ - } - } - else - { - hcryp->SizesSum = hcryp->Size; - } - - if (DoKeyIVConfig == 1U) - { - - /* Reset CrypHeaderCount */ - hcryp->CrypHeaderCount = 0U; - -#if defined(CRYP) - - /********************** Init phase ******************************************/ - - CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the initialization vector (IV) with CTR1 information */ - hcryp->Instance->IV0LR = (hcryp->Init.B0[0]) & CRYP_CCM_CTR1_0; - hcryp->Instance->IV0RR = hcryp->Init.B0[1]; - hcryp->Instance->IV1LR = hcryp->Init.B0[2]; - hcryp->Instance->IV1RR = (hcryp->Init.B0[3] & CRYP_CCM_CTR1_1) | CRYP_CCM_CTR1_2; - - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Write B0 packet into CRYP_DIN Register*/ - if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 1)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 2)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 3)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 1), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 2), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 3), 16); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 1)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 2)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 3)); - } - else - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 1); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 2); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 3); - } - /* Get tick */ - tickstart = HAL_GetTick(); - - /*Wait for the CRYPEN bit to be cleared*/ - while ((hcryp->Instance->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } -#else /* AES */ - /*AES2v1.1.1 : CCM authentication : no init phase, only header and final phase */ - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* configured encryption mode */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the initialization vector with zero values*/ - hcryp->Instance->IVR3 = 0U; - hcryp->Instance->IVR2 = 0U; - hcryp->Instance->IVR1 = 0U; - hcryp->Instance->IVR0 = 0U; - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Write the B0 packet into CRYP_DIN*/ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 1); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 2); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 3); - - /* wait until the end of computation */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked & return error */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* From that point the whole message must be processed, first the Header then the payload. - First the Header block(B1) : associated data length expressed in bytes concatenated with Associated Data (A)*/ - - if (hcryp->Init.HeaderSize != 0U) - { - if ((hcryp->Init.HeaderSize % 4U) == 0U) - { - /* HeaderSize %4, no padding */ - for (loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter += 4U) - { - /* Write the Input block in the Data Input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - } - else - { - /*Write Header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((hcryp->Init.HeaderSize) - (hcryp->Init.HeaderSize % 4U))); loopcounter += 4U) - { - /* Write the input block in the data input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; (loopcounter < (hcryp->Init.HeaderSize % 4U)); loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - while (loopcounter < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - } - } /* if (DoKeyIVConfig == 1U) */ - /* Then the payload: cleartext payload (not the ciphertext payload). - Write input Data, no output Data to get */ - if (hcryp->Size != 0U) - { - if ((hcryp->Size % 16U) != 0U) - { - /* recalculate wordsize */ - wordsize = ((wordsize / 4U) * 4U) ; - } - - /* Get tick */ - tickstart = HAL_GetTick(); - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - while ((hcryp->CrypInCount < wordsize) && (outcount < wordsize)) - { - /* Write plain data and get cipher data */ - CRYP_AES_ProcessData(hcryp, Timeout); - - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - if ((hcryp->Size % 16U) != 0U) - { - /* Compute the number of padding bytes in last block of payload */ - npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter ++) - { - /* Write the last input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (loopcounter < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0U; - loopcounter++; - } - /* Wait for CCF flag to be raised */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - } - } -#endif /* End AES or CRYP */ - -#if defined(CRYP) - - /************************* Header phase *************************************/ - /* Header block(B1) : associated data length expressed in bytes concatenated - with Associated Data (A)*/ - - if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) - { - return HAL_ERROR; - } - - /********************** Payload phase ***************************************/ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Disable the CRYP peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - } /* if (DoKeyIVConfig == 1U) */ - - if ((hcryp->Size % 16U) != 0U) - { - /* recalculate wordsize */ - wordsize = ((wordsize / 4U) * 4U) ; - } - /* Get tick */ - tickstart = HAL_GetTick(); - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - /* Write input data and get output data */ - while ((hcryp->CrypInCount < wordsize) && (outcount < wordsize)) - { - /* Write plain data and get cipher data */ - CRYP_AES_ProcessData(hcryp, Timeout); - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - if ((hcryp->Size % 16U) != 0U) - { - /* CRYP Workaround : CRYP1 generates correct TAG during CCM decryption only when ciphertext blocks size is multiple of - 128 bits. If lthe size of the last block of payload is inferior to 128 bits, when CCM decryption - is selected, then the TAG message will be wrong.*/ - CRYP_Workaround(hcryp, Timeout); - } -#endif /* CRYP */ - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief AES CCM encryption/decryption process in interrupt mode - * for TinyAES IP, no encrypt/decrypt performed, only authentication preparation. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) -{ - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ -#if defined(CRYP) - __IO uint32_t count = 0U; -#endif /* CRYP */ - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ - } - } - else - { - hcryp->SizesSum = hcryp->Size; - } - - /* Configure Key, IV and process message (header and payload) */ - if (DoKeyIVConfig == 1U) - { - /* Reset CrypHeaderCount */ - hcryp->CrypHeaderCount = 0U; - -#if defined(CRYP) - - /************ Init phase ************/ - - CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the initialization vector (IV) with CTR1 information */ - hcryp->Instance->IV0LR = (hcryp->Init.B0[0]) & CRYP_CCM_CTR1_0; - hcryp->Instance->IV0RR = hcryp->Init.B0[1]; - hcryp->Instance->IV1LR = hcryp->Init.B0[2]; - hcryp->Instance->IV1RR = (hcryp->Init.B0[3] & CRYP_CCM_CTR1_1) | CRYP_CCM_CTR1_2; - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Write the B0 packet into CRYP_DIN Register*/ - if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 1)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 2)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 3)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 1), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 2), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 3), 16); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 1)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 2)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 3)); - } - else - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 1); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 2); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 3); - } - /*Wait for the CRYPEN bit to be cleared*/ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while ((hcryp->Instance->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN); - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - } /* end of if (DoKeyIVConfig == 1U) */ - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI); - - /* Enable CRYP */ - __HAL_CRYP_ENABLE(hcryp); - -#else /* AES */ - - /*AES2v1.1.1 : CCM authentication : no init phase, only header and final phase */ - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* configured mode and encryption mode */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the initialization vector with zero values*/ - hcryp->Instance->IVR3 = 0U; - hcryp->Instance->IVR2 = 0U; - hcryp->Instance->IVR1 = 0U; - hcryp->Instance->IVR0 = 0U; - - /* Enable interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Write the B0 packet into CRYP_DIN*/ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 1); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 2); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 3); - - } /* end of if (DoKeyIVConfig == 1U) */ -#endif /* End AES or CRYP */ - - /* Return function status */ - return HAL_OK; -} -/** - * @brief AES CCM encryption/decryption process in DMA mode - * for TinyAES IP, no encrypt/decrypt performed, only authentication preparation. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp) -{ - uint32_t wordsize; - __IO uint32_t count = 0U; - uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ -#if defined(AES) - uint32_t loopcounter; - uint32_t npblb; - uint32_t lastwordsize; -#endif - - if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) - { - if (hcryp->KeyIVConfig == 1U) - { - /* If the Key and IV configuration has to be done only once - and if it has already been done, skip it */ - DoKeyIVConfig = 0U; - hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ - } - else - { - /* If the Key and IV configuration has to be done only once - and if it has not been done already, do it and set KeyIVConfig - to keep track it won't have to be done again next time */ - hcryp->KeyIVConfig = 1U; - hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ - } - } - else - { - hcryp->SizesSum = hcryp->Size; - } - - if (DoKeyIVConfig == 1U) - { - - /* Reset CrypHeaderCount */ - hcryp->CrypHeaderCount = 0U; - -#if defined(CRYP) - - /************************** Init phase **************************************/ - - CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the initialization vector (IV) with CTR1 information */ - hcryp->Instance->IV0LR = (hcryp->Init.B0[0]) & CRYP_CCM_CTR1_0; - hcryp->Instance->IV0RR = hcryp->Init.B0[1]; - hcryp->Instance->IV1LR = hcryp->Init.B0[2]; - hcryp->Instance->IV1RR = (hcryp->Init.B0[3] & CRYP_CCM_CTR1_1) | CRYP_CCM_CTR1_2; - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Write the B0 packet into CRYP_DIN Register*/ - if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 1)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 2)); - hcryp->Instance->DIN = __REV(*(uint32_t *)(hcryp->Init.B0 + 3)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 1), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 2), 16); - hcryp->Instance->DIN = __ROR(*(uint32_t *)(hcryp->Init.B0 + 3), 16); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 1)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 2)); - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(hcryp->Init.B0 + 3)); - } - else - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 1); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 2); - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.B0 + 3); - } - - /*Wait for the CRYPEN bit to be cleared*/ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while ((hcryp->Instance->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN); - -#else /* AES */ - - /*AES2v1.1.1 : CCM authentication : no init phase, only header and final phase */ - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* configured encryption mode */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); - - /* Set the key */ - CRYP_SetKey(hcryp, hcryp->Init.KeySize); - - /* Set the initialization vector with zero values*/ - hcryp->Instance->IVR3 = 0U; - hcryp->Instance->IVR2 = 0U; - hcryp->Instance->IVR1 = 0U; - hcryp->Instance->IVR0 = 0U; - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /*Write the B0 packet into CRYP_DIN*/ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 1); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 2); - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.B0 + 3); - - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* From that point the whole message must be processed, first the Header then the payload. - First the Header block(B1) : associated data length expressed in bytes concatenated with Associated Data (A)*/ - - if (hcryp->Init.HeaderSize != 0U) - { - if ((hcryp->Init.HeaderSize % 4U) == 0U) - { - /* HeaderSize %4, no padding */ - for (loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter += 4U) - { - /* Write the Input block in the Data Input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /* wait until the end of computation */ - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - } - else - { - /*Write Header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((hcryp->Init.HeaderSize) - (hcryp->Init.HeaderSize % 4U))); loopcounter += 4U) - { - /* Write the input block in the data input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; (loopcounter < (hcryp->Init.HeaderSize % 4U)); loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - while (loopcounter < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - } - } /* if (DoKeyIVConfig == 1U) */ - /* Then the payload: cleartext payload (not the ciphertext payload). - Write input Data, no output Data to get */ - if (hcryp->Size != 0U) - { - if (hcryp->Size >= 16U) - { - if ((hcryp->Size % 16U) == 0U) - { - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - else /*to compute last word<128bits, otherwise it will not be encrypted/decrypted */ - { - wordsize = (uint32_t)(hcryp->Size) + (16U - ((uint32_t)(hcryp->Size) % 16U)) ; - - /* Set the input and output addresses and start DMA transfer, pCrypOutBuffPtr size should be %4 */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), ((uint16_t)wordsize / 4U), - (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - } - if ((hcryp->Size < 16U) != 0U) - { - /* Compute the number of padding bytes in last block of payload */ - npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter ++) - { - /* Write the last input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (loopcounter < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0U; - loopcounter++; - } - count = CRYP_TIMEOUT_GCMCCMINITPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state and phase */ - hcryp->State = HAL_CRYP_STATE_READY; - } - } - else - { - /* Process unLocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state and phase */ - hcryp->State = HAL_CRYP_STATE_READY; - } -#endif /* AES */ -#if defined(CRYP) - /********************* Header phase *****************************************/ - - if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) - { - return HAL_ERROR; - } - - /******************** Payload phase *****************************************/ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Disable the CRYP peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - } /* if (DoKeyIVConfig == 1U) */ - if (hcryp->Size != 0U) - { - /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption & CCM Decryption - Workaround is implemented in polling mode, so if last block of - payload <128bit don't use HAL_CRYP_AESGCM_DMA otherwise TAG is incorrectly generated for GCM Encryption. */ - /* Set the input and output addresses and start DMA transfer */ - if ((hcryp->Size % 16U) == 0U) - { - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), hcryp->Size / 4U, (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - else - { - wordsize = (uint32_t)(hcryp->Size) + 16U - ((uint32_t)(hcryp->Size) % 16U) ; - - /* Set the input and output addresses and start DMA transfer, pCrypOutBuffPtr size should be %4*/ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (uint16_t)wordsize / 4U, - (uint32_t)(hcryp->pCrypOutBuffPtr)); - } - } - else /*Size = 0*/ - { - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state and phase */ - hcryp->State = HAL_CRYP_STATE_READY; - } -#endif /* CRYP */ - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Sets the payload phase in iterrupt mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @retval state - */ -static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp) -{ - uint32_t loopcounter; - uint32_t temp[4]; /* Temporary CrypOutBuff */ - uint32_t lastwordsize; - uint32_t npblb; - uint32_t i; -#if defined(AES) - uint16_t outcount; /* Temporary CrypOutCount Value */ -#endif /* AES */ - - /***************************** Payload phase *******************************/ - -#if defined(CRYP) - if (hcryp->Size == 0U) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - } - - else if (((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - if (((hcryp->Size / 4U) == hcryp->CrypInCount) && ((hcryp->Size % 16U) == 0U)) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); - - /* Call the input data transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - if (hcryp->CrypOutCount < (hcryp->Size / 4U)) - { - /* Read the output block from the Output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUT; - } - i = 0U; - while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - if (((hcryp->Size / 4U) == hcryp->CrypOutCount) && ((hcryp->Size % 16U) == 0U)) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Call output transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - } - else if ((hcryp->Size % 16U) != 0U) - { - /* Size should be %4 in word and %16 in byte otherwise TAG will be incorrectly generated for GCM Encryption & CCM Decryption - Workaround is implemented in polling mode, so if last block of - payload <128bit don't use CRYP_AESGCM_Encrypt_IT otherwise TAG is incorrectly generated. */ - - /* Compute the number of padding bytes in last block of payload */ - npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (loopcounter < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DIN = 0x0U; - loopcounter++; - } - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); - - if ((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) - { - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUT; - } - if (((hcryp->Size) / 4U) == 0U) - { - for (i = 0U; i < ((uint32_t)(hcryp->Size) % 4U); i++) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - } - } - i = 0x0U; - while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - } - if (hcryp->CrypOutCount >= (hcryp->Size / 4U)) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI | CRYP_IT_INI); - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Call output transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - else - { - /* Nothing to do */ - } -#else /* AES */ - - /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/ - for (i = 0U; i < 4U; i++) - { - temp[i] = hcryp->Instance->DOUTR; - } - i = 0U; - while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; - hcryp->CrypOutCount++; - i++; - } - /*Temporary CrypOutCount Value*/ - outcount = hcryp->CrypOutCount; - - if ((hcryp->CrypOutCount >= (hcryp->Size / 4U)) && ((outcount * 4U) >= hcryp->Size)) - { - /* Disable computation complete flag and errors interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Call output transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Output complete callback*/ - hcryp->OutCpltCallback(hcryp); -#else - /*Call legacy weak Output complete callback*/ - HAL_CRYP_OutCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - else if (((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) - { - /* Call Input transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - else /* Last block of payload < 128bit*/ - { - /* Workaround not implemented, Size should be %4 otherwise Tag will be incorrectly - generated for GCM Encryption & CCM Decryption. Workaround is implemented in polling mode, so if last block of - payload <128bit don't use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption & CCM Decryption. */ - - /* Compute the number of padding bytes in last block of payload */ - npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (loopcounter < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } -#endif /* AES */ - -} - - -/** - * @brief Sets the header phase in polling mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module(Header & HeaderSize) - * @param Timeout: Timeout value - * @retval state - */ -static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t loopcounter; - uint32_t size_in_bytes; - uint32_t tmp; - uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ - 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ - 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ - - /***************************** Header phase for GCM/GMAC or CCM *********************************/ - - if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) - { - size_in_bytes = hcryp->Init.HeaderSize * 4U; - } - else - { - size_in_bytes = hcryp->Init.HeaderSize; - } - - if (size_in_bytes != 0U) - { - -#if defined(CRYP) - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - if ((size_in_bytes % 16U) == 0U) - { - /* HeaderSize %4, no padding */ - for (loopcounter = 0U; (loopcounter < (size_in_bytes / 4U)); loopcounter += 4U) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /* Wait for IFEM to be raised */ - if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - else - { - /*Write header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 16U) * 4U)); loopcounter += 4U) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /* Wait for IFEM to be raised */ - if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 4U) % 4U)); loopcounter++) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - /* If the header size is a multiple of words */ - if ((size_in_bytes % 4U) == 0U) - { - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DIN = 0x0U; - loopcounter++; - } - } - else - { - /* Enter last bytes, padded with zeroes */ - tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[(hcryp->Init.DataType * 2U) + (size_in_bytes % 4U)]; - hcryp->Instance->DIN = tmp; - loopcounter++; - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DIN = 0x0U; - loopcounter++; - } - } - /* Wait for CCF IFEM to be raised */ - if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - /* Wait until the complete message has been processed */ - if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked & return error */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - -#else /* AES */ - - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - /* Workaround 1 :only AES before re-enabling the IP, datatype can be configured.*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - } - /* If size_in_bytes is a multiple of blocks (a multiple of four 32-bits words ) */ - if ((size_in_bytes % 16U) == 0U) - { - /* No padding */ - for (loopcounter = 0U; (loopcounter < (size_in_bytes / 4U)); loopcounter += 4U) - { - /* Write the input block in the data input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - } - else - { - /*Write header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 16U) * 4U)); loopcounter += 4U) - { - /* Write the input block in the data input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - /* Write last complete words */ - for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 4U) % 4U)); loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - /* If the header size is a multiple of words */ - if ((size_in_bytes % 4U) == 0U) - { - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } - else - { - /* Enter last bytes, padded with zeroes */ - tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[(hcryp->Init.DataType * 2U) + (size_in_bytes % 4U)]; - hcryp->Instance->DINR = tmp; - loopcounter++; - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } - - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } -#endif /* End AES or CRYP */ - } - else - { -#if defined(AES) - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - /*Workaround 1: only AES, before re-enabling the IP, datatype can be configured.*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - } -#endif /* AES */ - } - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Sets the header phase when using DMA in process - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module(Header & HeaderSize) - * @retval None - */ -static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp) -{ - __IO uint32_t count = 0U; - uint32_t loopcounter; - uint32_t headersize_in_bytes; - uint32_t tmp; - uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ - 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ - 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ - - /***************************** Header phase for GCM/GMAC or CCM *********************************/ - if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) - { - headersize_in_bytes = hcryp->Init.HeaderSize * 4U; - } - else - { - headersize_in_bytes = hcryp->Init.HeaderSize; - } - - if (headersize_in_bytes != 0U) - { - -#if defined(CRYP) - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - if ((headersize_in_bytes % 16U) == 0U) - { - /* HeaderSize %4, no padding */ - for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter += 4U) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /* Wait for IFEM to be raised */ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM)); - } - } - else - { - /*Write header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 16U) * 4U)); loopcounter += 4U) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /* Wait for IFEM to be raised */ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM)); - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - /* If the header size is a multiple of words */ - if ((headersize_in_bytes % 4U) == 0U) - { - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DIN = 0x0U; - loopcounter++; - } - } - else - { - /* Enter last bytes, padded with zeroes */ - tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; - hcryp->Instance->DIN = tmp; - loopcounter++; - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DIN = 0x0U; - loopcounter++; - } - } - /* Wait for IFEM to be raised */ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM)); - } - /* Wait until the complete message has been processed */ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY)); - -#else /* AES */ - - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - /* Workaround 1: only AES, before re-enabling the IP, datatype can be configured.*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - } - if ((headersize_in_bytes % 16U) == 0U) - { - /* HeaderSize %4, no padding */ - for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter += 4U) - { - /* Write the input block in the data input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - } - else - { - /*Write header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 16U) * 4U)); loopcounter += 4U) - { - /* Write the Input block in the Data Input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes /4U) % 4U)); loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - /* If the header size is a multiple of words */ - if ((headersize_in_bytes % 4U) == 0U) - { - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } - else - { - /* Enter last bytes, padded with zeroes */ - tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; - hcryp->Instance->DINR = tmp; - loopcounter++; - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } -#endif /* End AES or CRYP */ - } - else - { -#if defined(AES) - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - /*Workaround 1: only AES, before re-enabling the IP, datatype can be configured.*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); - - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - } -#endif /* AES */ - } - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Sets the header phase in interrupt mode - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module(Header & HeaderSize) - * @retval None - */ -static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) -{ - uint32_t loopcounter; -#if defined(AES) - uint32_t lastwordsize; - uint32_t npblb; -#endif - uint32_t headersize_in_bytes; - uint32_t tmp; - uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ - 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ - 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ - - if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) - { - headersize_in_bytes = hcryp->Init.HeaderSize * 4U; - } - else - { - headersize_in_bytes = hcryp->Init.HeaderSize; - } - - /***************************** Header phase *********************************/ - -#if defined(CRYP) - if (headersize_in_bytes <= ((uint32_t)(hcryp->CrypHeaderCount) * 4U)) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); - - /* Disable the CRYP peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - /* Enable Interrupts */ - __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - } - else if (((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U) - - { - /* HeaderSize %4, no padding */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - else - { - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < ((headersize_in_bytes / 4U) % 4U); loopcounter++) - { - hcryp->Instance->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - if ((headersize_in_bytes % 4U) == 0U) - { - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DIN = 0x0U; - loopcounter++; - hcryp->CrypHeaderCount++; - } - } - else - { - /* Enter last bytes, padded with zeros */ - tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; - hcryp->Instance->DIN = tmp; - loopcounter++; - hcryp->CrypHeaderCount++; - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DIN = 0x0U; - loopcounter++; - hcryp->CrypHeaderCount++; - } - } - } -#else /* AES */ - - if (headersize_in_bytes <= ((uint32_t)(hcryp->CrypHeaderCount) * 4U)) - { - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Payload phase not supported in CCM AES2 */ - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - /* Select payload phase once the header phase is performed */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); - } - if (hcryp->Init.Algorithm == CRYP_AES_CCM) - { - /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ - hcryp->CrypHeaderCount++; - } - /* Write the payload Input block in the IN FIFO */ - if (hcryp->Size == 0U) - { - /* Disable interrupts */ - __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); - - /* Change the CRYP state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } - else if (hcryp->Size >= 16U) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - - if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) - { - /* Call the input data transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - else /* Size < 4 words : first block is the last block*/ - { - /* Workaround not implemented, Size should be %4 otherwise Tag will be incorrectly - generated for GCM Encryption. Workaround is implemented in polling mode, so if last block of - payload <128bit don't use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ - - /* Compute the number of padding bytes in last block of payload */ - npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (loopcounter < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; - } - } - } - else if (((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++; - } - else /*HeaderSize < 4 or HeaderSize >4 & HeaderSize %4 != 0*/ - { - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < ((headersize_in_bytes / 4U) % 4U); loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - } - /* If the header size is a multiple of words */ - if ((headersize_in_bytes % 4U) == 0U) - { - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DINR = 0x0U; - loopcounter++; - hcryp->CrypHeaderCount++; - } - } - else - { - /* Enter last bytes, padded with zeros */ - tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; - hcryp->Instance->DINR = tmp; - loopcounter++; - hcryp->CrypHeaderCount++; - /* Pad the data with zeros to have a complete block */ - while (loopcounter < 4U) - { - hcryp->Instance->DINR = 0x0U; - loopcounter++; - hcryp->CrypHeaderCount++; - } - } - } -#endif /* End AES or CRYP */ -} - - -/** - * @brief Workaround used for GCM/CCM mode. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param Timeout: specify Timeout value - * @retval None - */ -static void CRYP_Workaround(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t lastwordsize; - uint32_t npblb; -#if defined(CRYP) - uint32_t iv1temp; - uint32_t temp[4] = {0}; - uint32_t temp2[4] = {0}; -#endif /* CRYP */ - uint32_t intermediate_data[4] = {0}; - uint32_t index; - - /* Compute the number of padding bytes in last block of payload */ - npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - -#if defined(CRYP) - - /* Workaround 2, case GCM encryption */ - if (hcryp->Init.Algorithm == CRYP_AES_GCM) - { - if ((hcryp->Instance->CR & CRYP_CR_ALGODIR) == CRYP_OPERATINGMODE_ENCRYPT) - { - /*Workaround in order to properly compute authentication tags while doing - a GCM encryption with the last block of payload size inferior to 128 bits*/ - /* Disable CRYP to start the final phase */ - __HAL_CRYP_DISABLE(hcryp); - - /*Update CRYP_IV1R register and ALGOMODE*/ - hcryp->Instance->IV1RR = ((hcryp->Instance->CSGCMCCM7R) - 1U); - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_AES_CTR); - - /* Enable CRYP to start the final phase */ - __HAL_CRYP_ENABLE(hcryp); - } - /* Last block optionally pad the data with zeros*/ - for (index = 0; index < lastwordsize; index ++) - { - /* Write the last input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (index < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DIN = 0U; - index++; - } - /* Wait for OFNE flag to be raised */ - if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - if ((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) - { - for (index = 0U; index < 4U; index++) - { - /* Read the output block from the output FIFO */ - intermediate_data[index] = hcryp->Instance->DOUT; - - /* Intermediate data buffer to be used in for the workaround*/ - *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = intermediate_data[index]; - hcryp->CrypOutCount++; - } - } - - if ((hcryp->Instance->CR & CRYP_CR_ALGODIR) == CRYP_OPERATINGMODE_ENCRYPT) - { - /*workaround in order to properly compute authentication tags while doing - a GCM encryption with the last block of payload size inferior to 128 bits*/ - /* Change the AES mode to GCM mode and Select Final phase */ - /* configured CHMOD GCM */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_AES_GCM); - - /* configured final phase */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_FINAL); - - if ((hcryp->Instance->CR & CRYP_CR_DATATYPE) == CRYP_DATATYPE_32B) - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= 0xFFFFFF00U; - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= 0xFFFF0000U; - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= 0xFF000000U; - } - } - else if ((hcryp->Instance->CR & CRYP_CR_DATATYPE) == CRYP_DATATYPE_8B) - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= __REV(0xFFFFFF00U); - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= __REV(0xFFFF0000U); - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= __REV(0xFF000000U); - } - } - else if ((hcryp->Instance->CR & CRYP_CR_DATATYPE) == CRYP_DATATYPE_16B) - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= __ROR((0xFFFFFF00U), 16); - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= __ROR((0xFFFF0000U), 16); - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= __ROR((0xFF000000U), 16); - } - } - else /*CRYP_DATATYPE_1B*/ - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= __RBIT(0xFFFFFF00U); - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= __RBIT(0xFFFF0000U); - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= __RBIT(0xFF000000U); - } - } - for (index = 0U; index < lastwordsize; index ++) - { - /*Write the intermediate_data in the IN FIFO */ - hcryp->Instance->DIN = intermediate_data[index]; - } - while (index < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DIN = 0x0U; - index++; - } - /* Wait for OFNE flag to be raised */ - if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - if ((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) - { - for (index = 0U; index < 4U; index++) - { - intermediate_data[index] = hcryp->Instance->DOUT; - } - } - } - } /* End of GCM encryption */ - else - { - /* Workaround 2, case CCM decryption, in order to properly compute - authentication tags while doing a CCM decryption with the last block - of payload size inferior to 128 bits*/ - - if ((hcryp->Instance->CR & CRYP_CR_ALGODIR) == CRYP_OPERATINGMODE_DECRYPT) - { - iv1temp = hcryp->Instance->CSGCMCCM7R; - - /* Disable CRYP to start the final phase */ - __HAL_CRYP_DISABLE(hcryp); - - temp[0] = hcryp->Instance->CSGCMCCM0R; - temp[1] = hcryp->Instance->CSGCMCCM1R; - temp[2] = hcryp->Instance->CSGCMCCM2R; - temp[3] = hcryp->Instance->CSGCMCCM3R; - - hcryp->Instance->IV1RR = iv1temp; - - /* Configured CHMOD CTR */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_AES_CTR); - - /* Enable CRYP to start the final phase */ - __HAL_CRYP_ENABLE(hcryp); - } - /* Last block optionally pad the data with zeros*/ - for (index = 0; index < lastwordsize; index ++) - { - /* Write the last Input block in the IN FIFO */ - hcryp->Instance->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (index < 4U) - { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DIN = 0U; - index++; - } - /* Wait for OFNE flag to be raised */ - if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - if ((hcryp->Instance->SR & CRYP_FLAG_OFNE) != 0x0U) - { - for (index = 0U; index < 4U; index++) - { - /* Read the Output block from the Output FIFO */ - intermediate_data[index] = hcryp->Instance->DOUT; - - /*intermediate data buffer to be used in for the workaround*/ - *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = intermediate_data[index]; - hcryp->CrypOutCount++; - } - } - - if ((hcryp->Instance->CR & CRYP_CR_ALGODIR) == CRYP_OPERATINGMODE_DECRYPT) - { - temp2[0] = hcryp->Instance->CSGCMCCM0R; - temp2[1] = hcryp->Instance->CSGCMCCM1R; - temp2[2] = hcryp->Instance->CSGCMCCM2R; - temp2[3] = hcryp->Instance->CSGCMCCM3R; - - /* configured CHMOD CCM */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_ALGOMODE, CRYP_AES_CCM); - - /* configured Header phase */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_HEADER); - - /*set to zero the bits corresponding to the padded bits*/ - for (index = lastwordsize; index < 4U; index ++) - { - intermediate_data[index] = 0U; - } - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= 0xFFFFFF00U; - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= 0xFFFF0000U; - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= 0xFF000000U; - } - for (index = 0U; index < 4U ; index ++) - { - intermediate_data[index] ^= temp[index]; - intermediate_data[index] ^= temp2[index]; - } - for (index = 0U; index < 4U; index ++) - { - /* Write the last Input block in the IN FIFO */ - hcryp->Instance->DIN = intermediate_data[index] ; - } - - /* Wait for BUSY flag to be raised */ - if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - } /* End of CCM WKA*/ - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); - -#else /* AES */ - - /*Workaround 2: case GCM encryption, during payload phase and before inserting - the last block of paylaod, which size is inferior to 128 bits */ - - if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) - { - /* configured CHMOD CTR */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_CHMOD, CRYP_AES_CTR); - } - /* last block optionally pad the data with zeros*/ - for (index = 0U; index < lastwordsize; index ++) - { - /* Write the last Input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (index < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0U; - index++; - } - /* Wait for CCF flag to be raised */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - hcryp->State = HAL_CRYP_STATE_READY; - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - for (index = 0U; index < 4U; index++) - { - /* Read the Output block from the Output FIFO */ - intermediate_data[index] = hcryp->Instance->DOUTR; - - /*intermediate data buffer to be used in the workaround*/ - *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = intermediate_data[index]; - hcryp->CrypOutCount++; - } - - if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) - { - /* configured CHMOD GCM */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_CHMOD, CRYP_AES_GCM_GMAC); - - /* Select final phase */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); - - if ((hcryp->Instance->CR & AES_CR_DATATYPE) == CRYP_DATATYPE_32B) - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= 0xFFFFFF00U; - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= 0xFFFF0000U; - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= 0xFF000000U; - } - } - else if ((hcryp->Instance->CR & AES_CR_DATATYPE) == CRYP_DATATYPE_8B) - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= __REV(0xFFFFFF00U); - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= __REV(0xFFFF0000U); - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= __REV(0xFF000000U); - } - } - else if ((hcryp->Instance->CR & AES_CR_DATATYPE) == CRYP_DATATYPE_16B) - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= __ROR((0xFFFFFF00U), 16); - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= __ROR((0xFFFF0000U), 16); - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= __ROR((0xFF000000U), 16); - } - } - else /*CRYP_DATATYPE_1B*/ - { - if ((npblb % 4U) == 1U) - { - intermediate_data[lastwordsize - 1U] &= __RBIT(0xFFFFFF00U); - } - if ((npblb % 4U) == 2U) - { - intermediate_data[lastwordsize - 1U] &= __RBIT(0xFFFF0000U); - } - if ((npblb % 4U) == 3U) - { - intermediate_data[lastwordsize - 1U] &= __RBIT(0xFF000000U); - } - } - - /*Write the intermediate_data in the IN FIFO */ - for (index = 0U; index < lastwordsize; index ++) - { - hcryp->Instance->DINR = intermediate_data[index]; - } - while (index < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0U; - index++; - } - /* Wait for CCF flag to be raised */ - if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - for (index = 0U; index < 4U; index++) - { - intermediate_data[index] = hcryp->Instance->DOUTR; - } - }/*End of Workaround 2*/ -#endif /* End AES or CRYP */ -} -#endif /* AES or GCM CCM defined*/ -#if defined (CRYP) -#if defined (CRYP_CR_ALGOMODE_AES_GCM) -/** - * @brief Handle CRYP hardware block Timeout when waiting for IFEM flag to be raised. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @param Timeout: Timeout duration. - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_WaitOnIFEMFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Get timeout */ - tickstart = HAL_GetTick(); - - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - return HAL_ERROR; - } - } - } - return HAL_OK; -} -#endif /* GCM CCM defined*/ -/** - * @brief Handle CRYP hardware block Timeout when waiting for BUSY flag to be raised. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @param Timeout: Timeout duration. - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_WaitOnBUSYFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Get timeout */ - tickstart = HAL_GetTick(); - - while (HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - return HAL_ERROR; - } - } - } - return HAL_OK; -} - - -/** - * @brief Handle CRYP hardware block Timeout when waiting for OFNE flag to be raised. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @param Timeout: Timeout duration. - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_WaitOnOFNEFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Get timeout */ - tickstart = HAL_GetTick(); - - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -#else /* AES */ - -/** - * @brief Handle CRYP hardware block Timeout when waiting for CCF flag to be raised. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module. - * @param Timeout: Timeout duration. - * @retval HAL status - */ -static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Get timeout */ - tickstart = HAL_GetTick(); - - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -#endif /* End AES or CRYP */ - - -/** - * @} - */ - - - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_CRYP_MODULE_ENABLED */ - - -/** - * @} - */ -#endif /* TinyAES or CRYP*/ -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c deleted file mode 100644 index 3a82847..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c +++ /dev/null @@ -1,680 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cryp_ex.c - * @author MCD Application Team - * @brief Extended CRYP HAL module driver - * This file provides firmware functions to manage the following - * functionalities of CRYP extension peripheral: - * + Extended AES processing functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The CRYP extension HAL driver can be used as follows: - (#)After AES-GCM or AES-CCM Encryption/Decryption user can start following API - to get the authentication messages : - (##) HAL_CRYPEx_AESGCM_GenerateAuthTAG - (##) HAL_CRYPEx_AESCCM_GenerateAuthTAG - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (AES) || defined (CRYP) -#if defined (CRYP_CR_ALGOMODE_AES_GCM)|| defined (AES) -/** @defgroup CRYPEx CRYPEx - * @brief CRYP Extension HAL module driver. - * @{ - */ - - -#ifdef HAL_CRYP_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup CRYPEx_Private_Defines - * @{ - */ -#if defined(AES) -#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ -#define CRYP_PHASE_HEADER AES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ -#define CRYP_PHASE_PAYLOAD AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ -#define CRYP_PHASE_FINAL AES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ - -#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode */ -#define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions */ -#define CRYP_OPERATINGMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */ -#define CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption only used when performing ECB and CBC decryptions */ - -#else /* CRYP */ - -#define CRYP_PHASE_INIT 0x00000000U -#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0 -#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1 -#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH - -#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U -#define CRYP_OPERATINGMODE_DECRYPT CRYP_CR_ALGODIR -#endif /* End AES or CRYP */ - -#define CRYPEx_PHASE_PROCESS 0x02U /*!< CRYP peripheral is in processing phase */ -#define CRYPEx_PHASE_FINAL 0x03U /*!< CRYP peripheral is in final phase this is relevant only with CCM and GCM modes */ - -/* CTR0 information to use in CCM algorithm */ -#define CRYP_CCM_CTR0_0 0x07FFFFFFU -#define CRYP_CCM_CTR0_3 0xFFFFFF00U - - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - - - -/* Exported functions---------------------------------------------------------*/ -/** @addtogroup CRYPEx_Exported_Functions - * @{ - */ - -/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions - * @brief Extended processing functions. - * -@verbatim - ============================================================================== - ##### Extended AES processing functions ##### - ============================================================================== - [..] This section provides functions allowing to generate the authentication - TAG in Polling mode - (#)HAL_CRYPEx_AESGCM_GenerateAuthTAG - (#)HAL_CRYPEx_AESCCM_GenerateAuthTAG - they should be used after Encrypt/Decrypt operation. - -@endverbatim - * @{ - */ - - -/** - * @brief generate the GCM authentication TAG. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param AuthTag: Pointer to the authentication buffer - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout) -{ - uint32_t tickstart; - /* Assume first Init.HeaderSize is in words */ - uint64_t headerlength = (uint64_t)(hcryp->Init.HeaderSize) * 32U; /* Header length in bits */ - uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* Input length in bits */ - uint32_t tagaddr = (uint32_t)AuthTag; - - /* Correct headerlength if Init.HeaderSize is actually in bytes */ - if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_BYTE) - { - headerlength /= 4U; - } - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Check if initialization phase has already been performed */ - if (hcryp->Phase == CRYPEx_PHASE_PROCESS) - { - /* Change the CRYP phase */ - hcryp->Phase = CRYPEx_PHASE_FINAL; - } - else /* Initialization phase has not been performed*/ - { - /* Disable the Peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Sequence error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - -#if defined(CRYP) - - /* Disable CRYP to start the final phase */ - __HAL_CRYP_DISABLE(hcryp); - - /* Select final phase */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_FINAL); - - /*ALGODIR bit must be set to '0'.*/ - hcryp->Instance->CR &= ~CRYP_CR_ALGODIR; - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /* Write the number of bits in header (64 bits) followed by the number of bits - in the payload */ - if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = __RBIT((uint32_t)(headerlength)); - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = __RBIT((uint32_t)(inputlength)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = __REV((uint32_t)(headerlength)); - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = __REV((uint32_t)(inputlength)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = __ROR((uint32_t)headerlength, 16U); - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = __ROR((uint32_t)inputlength, 16U); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_32B) - { - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = (uint32_t)(headerlength); - hcryp->Instance->DIN = 0U; - hcryp->Instance->DIN = (uint32_t)(inputlength); - } - else - { - /* Nothing to do */ - } - - /* Wait for OFNE flag to be raised */ - tickstart = HAL_GetTick(); - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP Peripheral Clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - /* Read the authentication TAG in the output FIFO */ - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - -#else /* AES*/ - - /* Select final phase */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); - - /* Write the number of bits in header (64 bits) followed by the number of bits - in the payload */ - if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = __RBIT((uint32_t)(headerlength)); - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = __RBIT((uint32_t)(inputlength)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = __REV((uint32_t)(headerlength)); - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = __REV((uint32_t)(inputlength)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = __ROR((uint32_t)headerlength, 16U); - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = __ROR((uint32_t)inputlength, 16U); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_32B) - { - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = (uint32_t)(headerlength); - hcryp->Instance->DINR = 0U; - hcryp->Instance->DINR = (uint32_t)(inputlength); - } - else - { - /* Nothing to do */ - } - /* Wait for CCF flag to be raised */ - tickstart = HAL_GetTick(); - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - /* Read the authentication TAG in the output FIFO */ - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - -#endif /* End AES or CRYP */ - - /* Disable the peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } - else - { - /* Busy error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; - return HAL_ERROR; - } - /* Return function status */ - return HAL_OK; -} - -/** - * @brief AES CCM Authentication TAG generation. - * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains - * the configuration information for CRYP module - * @param AuthTag: Pointer to the authentication buffer - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout) -{ - uint32_t tagaddr = (uint32_t)AuthTag; - uint32_t ctr0 [4] = {0}; - uint32_t ctr0addr = (uint32_t)ctr0; - uint32_t tickstart; - - if (hcryp->State == HAL_CRYP_STATE_READY) - { - /* Process locked */ - __HAL_LOCK(hcryp); - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_BUSY; - - /* Check if initialization phase has already been performed */ - if (hcryp->Phase == CRYPEx_PHASE_PROCESS) - { - /* Change the CRYP phase */ - hcryp->Phase = CRYPEx_PHASE_FINAL; - } - else /* Initialization phase has not been performed*/ - { - /* Disable the peripheral */ - __HAL_CRYP_DISABLE(hcryp); - - /* Sequence error code field */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - -#if defined(CRYP) - - /* Disable CRYP to start the final phase */ - __HAL_CRYP_DISABLE(hcryp); - - /* Select final phase & ALGODIR bit must be set to '0'. */ - MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH | CRYP_CR_ALGODIR, CRYP_PHASE_FINAL | CRYP_OPERATINGMODE_ENCRYPT); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - /* Write the counter block in the IN FIFO, CTR0 information from B0 - data has to be swapped according to the DATATYPE*/ - ctr0[0] = (hcryp->Init.B0[0]) & CRYP_CCM_CTR0_0; - ctr0[1] = hcryp->Init.B0[1]; - ctr0[2] = hcryp->Init.B0[2]; - ctr0[3] = hcryp->Init.B0[3] & CRYP_CCM_CTR0_3; - - if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U); - ctr0addr += 4U; - hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U); - ctr0addr += 4U; - hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U); - ctr0addr += 4U; - hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr)); - } - else - { - hcryp->Instance->DIN = *(uint32_t *)(ctr0addr); - ctr0addr += 4U; - hcryp->Instance->DIN = *(uint32_t *)(ctr0addr); - ctr0addr += 4U; - hcryp->Instance->DIN = *(uint32_t *)(ctr0addr); - ctr0addr += 4U; - hcryp->Instance->DIN = *(uint32_t *)(ctr0addr); - } - /* Wait for OFNE flag to be raised */ - tickstart = HAL_GetTick(); - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral Clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - /* Read the Auth TAG in the IN FIFO */ - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT; - -#else /* AES */ - - /* Select final phase */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); - - /* Write the counter block in the IN FIFO, CTR0 information from B0 - data has to be swapped according to the DATATYPE*/ - if (hcryp->Init.DataType == CRYP_DATATYPE_8B) - { - ctr0[0] = (__REV(hcryp->Init.B0[0]) & CRYP_CCM_CTR0_0); - ctr0[1] = __REV(hcryp->Init.B0[1]); - ctr0[2] = __REV(hcryp->Init.B0[2]); - ctr0[3] = (__REV(hcryp->Init.B0[3])& CRYP_CCM_CTR0_3); - - hcryp->Instance->DINR = __REV(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DINR = __REV(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DINR = __REV(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DINR = __REV(*(uint32_t *)(ctr0addr)); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_16B) - { - ctr0[0] = (__ROR((hcryp->Init.B0[0]), 16U)& CRYP_CCM_CTR0_0); - ctr0[1] = __ROR((hcryp->Init.B0[1]), 16U); - ctr0[2] = __ROR((hcryp->Init.B0[2]), 16U); - ctr0[3] = (__ROR((hcryp->Init.B0[3]), 16U)& CRYP_CCM_CTR0_3); - - hcryp->Instance->DINR = __ROR(*(uint32_t *)(ctr0addr), 16U); - ctr0addr += 4U; - hcryp->Instance->DINR = __ROR(*(uint32_t *)(ctr0addr), 16U); - ctr0addr += 4U; - hcryp->Instance->DINR = __ROR(*(uint32_t *)(ctr0addr), 16U); - ctr0addr += 4U; - hcryp->Instance->DINR = __ROR(*(uint32_t *)(ctr0addr), 16U); - } - else if (hcryp->Init.DataType == CRYP_DATATYPE_1B) - { - ctr0[0] = (__RBIT(hcryp->Init.B0[0])& CRYP_CCM_CTR0_0); - ctr0[1] = __RBIT(hcryp->Init.B0[1]); - ctr0[2] = __RBIT(hcryp->Init.B0[2]); - ctr0[3] = (__RBIT(hcryp->Init.B0[3])& CRYP_CCM_CTR0_3); - - hcryp->Instance->DINR = __RBIT(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DINR = __RBIT(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DINR = __RBIT(*(uint32_t *)(ctr0addr)); - ctr0addr += 4U; - hcryp->Instance->DINR = __RBIT(*(uint32_t *)(ctr0addr)); - } - else - { - ctr0[0] = (hcryp->Init.B0[0]) & CRYP_CCM_CTR0_0; - ctr0[1] = hcryp->Init.B0[1]; - ctr0[2] = hcryp->Init.B0[2]; - ctr0[3] = hcryp->Init.B0[3] & CRYP_CCM_CTR0_3; - - hcryp->Instance->DINR = *(uint32_t *)(ctr0addr); - ctr0addr += 4U; - hcryp->Instance->DINR = *(uint32_t *)(ctr0addr); - ctr0addr += 4U; - hcryp->Instance->DINR = *(uint32_t *)(ctr0addr); - ctr0addr += 4U; - hcryp->Instance->DINR = *(uint32_t *)(ctr0addr); - } - - /* Wait for CCF flag to be raised */ - tickstart = HAL_GetTick(); - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable the CRYP peripheral Clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - } - - /* Read the authentication TAG in the output FIFO */ - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - tagaddr += 4U; - *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - -#endif /* End of AES || CRYP */ - - /* Change the CRYP peripheral state */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - - /* Disable CRYP */ - __HAL_CRYP_DISABLE(hcryp); - } - else - { - /* Busy error code field */ - hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; - return HAL_ERROR; - } - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -#if defined (AES) -/** @defgroup CRYPEx_Exported_Functions_Group2 Key Derivation functions - * @brief AutoKeyDerivation functions - * -@verbatim - ============================================================================== - ##### Key Derivation functions ##### - ============================================================================== - [..] This section provides functions allowing to Enable or Disable the - the AutoKeyDerivation parameter in CRYP_HandleTypeDef structure - These function are allowed only in TinyAES IP. - -@endverbatim - * @{ - */ - -/** - * @brief AES enable key derivation functions - * @param hcryp: pointer to a CRYP_HandleTypeDef structure. - * @retval None - */ -void HAL_CRYPEx_EnableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp) -{ - if (hcryp->State == HAL_CRYP_STATE_READY) - { - hcryp->AutoKeyDerivation = ENABLE; - } - else - { - /* Busy error code field */ - hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; - } -} -/** - * @brief AES disable key derivation functions - * @param hcryp: pointer to a CRYP_HandleTypeDef structure. - * @retval None - */ -void HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp) -{ - if (hcryp->State == HAL_CRYP_STATE_READY) - { - hcryp->AutoKeyDerivation = DISABLE; - } - else - { - /* Busy error code field */ - hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; - } -} - -/** - * @} - */ -#endif /* AES or GCM CCM defined*/ -#endif /* AES */ -#endif /* HAL_CRYP_MODULE_ENABLED */ - -/** - * @} - */ -#endif /* TinyAES or CRYP*/ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c deleted file mode 100644 index d117c0e..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c +++ /dev/null @@ -1,1161 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dcmi.c - * @author MCD Application Team - * @brief DCMI HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the Digital Camera Interface (DCMI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Error functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The sequence below describes how to use this driver to capture image - from a camera module connected to the DCMI Interface. - This sequence does not take into account the configuration of the - camera module, which should be made before to configure and enable - the DCMI to capture images. - - (#) Program the required configuration through following parameters: - horizontal and vertical polarity, pixel clock polarity, Capture Rate, - Synchronization Mode, code of the frame delimiter and data width - using HAL_DCMI_Init() function. - - (#) Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR - register to the destination memory buffer. - - (#) Program the required configuration through following parameters: - DCMI mode, destination memory Buffer address and the data length - and enable capture using HAL_DCMI_Start_DMA() function. - - (#) Optionally, configure and Enable the CROP feature to select a rectangular - window from the received image using HAL_DCMI_ConfigCrop() - and HAL_DCMI_EnableCROP() functions - - (#) The capture can be stopped using HAL_DCMI_Stop() function. - - (#) To control DCMI state you can use the function HAL_DCMI_GetState(). - - *** DCMI HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DCMI HAL driver. - - (+) __HAL_DCMI_ENABLE: Enable the DCMI peripheral. - (+) __HAL_DCMI_DISABLE: Disable the DCMI peripheral. - (+) __HAL_DCMI_GET_FLAG: Get the DCMI pending flags. - (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags. - (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts. - (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts. - (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not. - - [..] - (@) You can refer to the DCMI HAL driver header file for more useful macros - - *** Callback registration *** - ============================= - - The compilation define USE_HAL_DCMI_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use functions HAL_DCMI_RegisterCallback() to register a user callback. - - Function HAL_DCMI_RegisterCallback() allows to register following callbacks: - (+) FrameEventCallback : DCMI Frame Event. - (+) VsyncEventCallback : DCMI Vsync Event. - (+) LineEventCallback : DCMI Line Event. - (+) ErrorCallback : DCMI error. - (+) MspInitCallback : DCMI MspInit. - (+) MspDeInitCallback : DCMI MspDeInit. - This function takes as parameters the HAL peripheral handle, the callback ID - and a pointer to the user callback function. - - Use function HAL_DCMI_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - HAL_DCMI_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the callback ID. - This function allows to reset following callbacks: - (+) FrameEventCallback : DCMI Frame Event. - (+) VsyncEventCallback : DCMI Vsync Event. - (+) LineEventCallback : DCMI Line Event. - (+) ErrorCallback : DCMI error. - (+) MspInitCallback : DCMI MspInit. - (+) MspDeInitCallback : DCMI MspDeInit. - - By default, after the HAL_DCMI_Init and if the state is HAL_DCMI_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions: - examples FrameEventCallback(), HAL_DCMI_ErrorCallback(). - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_DCMI_Init - and HAL_DCMI_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_DCMI_Init and HAL_DCMI_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_DCMI_RegisterCallback before calling HAL_DCMI_DeInit - or HAL_DCMI_Init function. - - When the compilation define USE_HAL_DCMI_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -/** @defgroup DCMI DCMI - * @brief DCMI HAL module driver - * @{ - */ - -#ifdef HAL_DCMI_MODULE_ENABLED - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define HAL_TIMEOUT_DCMI_STOP 14U /* Set timeout to 1s */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void DCMI_DMAXferCplt(DMA_HandleTypeDef *hdma); -static void DCMI_DMAError(DMA_HandleTypeDef *hdma); - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DCMI_Exported_Functions DCMI Exported Functions - * @{ - */ - -/** @defgroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the DCMI - (+) De-initialize the DCMI - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the DCMI according to the specified - * parameters in the DCMI_InitTypeDef and create the associated handle. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi) -{ - /* Check the DCMI peripheral state */ - if(hdcmi == NULL) - { - return HAL_ERROR; - } - - /* Check function parameters */ - assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance)); - assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity)); - assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity)); - assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity)); - assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode)); - assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate)); - assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode)); - assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode)); - - if(hdcmi->State == HAL_DCMI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hdcmi->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - /* Init the DCMI Callback settings */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - hdcmi->FrameEventCallback = HAL_DCMI_FrameEventCallback; /* Legacy weak FrameEventCallback */ - hdcmi->VsyncEventCallback = HAL_DCMI_VsyncEventCallback; /* Legacy weak VsyncEventCallback */ - hdcmi->LineEventCallback = HAL_DCMI_LineEventCallback; /* Legacy weak LineEventCallback */ - hdcmi->ErrorCallback = HAL_DCMI_ErrorCallback; /* Legacy weak ErrorCallback */ - - if(hdcmi->MspInitCallback == NULL) - { - /* Legacy weak MspInit Callback */ - hdcmi->MspInitCallback = HAL_DCMI_MspInit; - } - /* Initialize the low level hardware (MSP) */ - hdcmi->MspInitCallback(hdcmi); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_DCMI_MspInit(hdcmi); -#endif /* (USE_HAL_DCMI_REGISTER_CALLBACKS) */ - HAL_DCMI_MspInit(hdcmi); - } - - /* Change the DCMI state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Set DCMI parameters */ - /* Configures the HS, VS, DE and PC polarity */ - hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 | - DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG | - DCMI_CR_ESS); - hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate | \ - hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity | \ - hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode | \ - hdcmi->Init.JPEGMode); - - if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED) - { - hdcmi->Instance->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) | - ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << DCMI_POSITION_ESCR_LSC)| - ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << DCMI_POSITION_ESCR_LEC) | - ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << DCMI_POSITION_ESCR_FEC)); - } - - /* Enable the Line, Vsync, Error and Overrun interrupts */ - __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR); - - /* Update error code */ - hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE; - - /* Initialize the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Deinitializes the DCMI peripheral registers to their default reset - * values. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi) -{ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - if(hdcmi->MspDeInitCallback == NULL) - { - hdcmi->MspDeInitCallback = HAL_DCMI_MspDeInit; - } - /* De-Initialize the low level hardware (MSP) */ - hdcmi->MspDeInitCallback(hdcmi); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_DCMI_MspDeInit(hdcmi); -#endif /* (USE_HAL_DCMI_REGISTER_CALLBACKS) */ - - /* Update error code */ - hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE; - - /* Initialize the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdcmi); - - return HAL_OK; -} - -/** - * @brief Initializes the DCMI MSP. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval None - */ -__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdcmi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DCMI_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the DCMI MSP. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval None - */ -__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdcmi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DCMI_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ -/** @defgroup DCMI_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure destination address and data length and - Enables DCMI DMA request and enables DCMI capture - (+) Stop the DCMI capture. - (+) Handles DCMI interrupt request. - -@endverbatim - * @{ - */ - -/** - * @brief Enables DCMI DMA request and enables DCMI capture - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @param DCMI_Mode DCMI capture mode snapshot or continuous grab. - * @param pData The destination memory Buffer address (LCD Frame buffer). - * @param Length The length of capture to be transferred. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length) -{ - /* Initialize the second memory address */ - uint32_t SecondMemAddress = 0U; - - /* Check function parameters */ - assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode)); - - /* Process Locked */ - __HAL_LOCK(hdcmi); - - /* Lock the DCMI peripheral state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Enable DCMI by setting DCMIEN bit */ - __HAL_DCMI_ENABLE(hdcmi); - - /* Configure the DCMI Mode */ - hdcmi->Instance->CR &= ~(DCMI_CR_CM); - hdcmi->Instance->CR |= (uint32_t)(DCMI_Mode); - - /* Set the DMA memory0 conversion complete callback */ - hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAXferCplt; - - /* Set the DMA error callback */ - hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError; - - /* Set the dma abort callback */ - hdcmi->DMA_Handle->XferAbortCallback = NULL; - - /* Reset transfer counters value */ - hdcmi->XferCount = 0U; - hdcmi->XferTransferNumber = 0U; - - if(Length <= 0xFFFFU) - { - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, Length); - } - else /* DCMI_DOUBLE_BUFFER Mode */ - { - /* Set the DMA memory1 conversion complete callback */ - hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAXferCplt; - - /* Initialize transfer parameters */ - hdcmi->XferCount = 1U; - hdcmi->XferSize = Length; - hdcmi->pBuffPtr = pData; - - /* Get the number of buffer */ - while(hdcmi->XferSize > 0xFFFFU) - { - hdcmi->XferSize = (hdcmi->XferSize/2U); - hdcmi->XferCount = hdcmi->XferCount*2U; - } - - /* Update DCMI counter and transfer number*/ - hdcmi->XferCount = (hdcmi->XferCount - 2U); - hdcmi->XferTransferNumber = hdcmi->XferCount; - - /* Update second memory address */ - SecondMemAddress = (uint32_t)(pData + (4U*hdcmi->XferSize)); - - /* Start DMA multi buffer transfer */ - HAL_DMAEx_MultiBufferStart_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, SecondMemAddress, hdcmi->XferSize); - } - - /* Enable Capture */ - hdcmi->Instance->CR |= DCMI_CR_CAPTURE; - - /* Release Lock */ - __HAL_UNLOCK(hdcmi); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disable DCMI DMA request and Disable DCMI capture - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi) -{ - __IO uint32_t count = SystemCoreClock / HAL_TIMEOUT_DCMI_STOP; - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdcmi); - - /* Lock the DCMI peripheral state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Disable Capture */ - hdcmi->Instance->CR &= ~(DCMI_CR_CAPTURE); - - /* Check if the DCMI capture effectively disabled */ - do - { - if (count-- == 0U) - { - /* Update error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT; - - status = HAL_TIMEOUT; - break; - } - } - while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0U); - - /* Disable the DCMI */ - __HAL_DCMI_DISABLE(hdcmi); - - /* Disable the DMA */ - HAL_DMA_Abort(hdcmi->DMA_Handle); - - /* Update error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_NONE; - - /* Change DCMI state */ - hdcmi->State = HAL_DCMI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - /* Return function status */ - return status; -} - -/** - * @brief Suspend DCMI capture - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi) -{ - __IO uint32_t count = SystemCoreClock / HAL_TIMEOUT_DCMI_STOP; - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdcmi); - - if(hdcmi->State == HAL_DCMI_STATE_BUSY) - { - /* Change DCMI state */ - hdcmi->State = HAL_DCMI_STATE_SUSPENDED; - - /* Disable Capture */ - hdcmi->Instance->CR &= ~(DCMI_CR_CAPTURE); - - /* Check if the DCMI capture effectively disabled */ - do - { - if (count-- == 0U) - { - /* Update error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT; - - /* Change DCMI state */ - hdcmi->State = HAL_DCMI_STATE_READY; - - status = HAL_TIMEOUT; - break; - } - } - while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0); - } - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - /* Return function status */ - return status; -} - -/** - * @brief Resume DCMI capture - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi) -{ - /* Process locked */ - __HAL_LOCK(hdcmi); - - if(hdcmi->State == HAL_DCMI_STATE_SUSPENDED) - { - /* Change DCMI state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Disable Capture */ - hdcmi->Instance->CR |= DCMI_CR_CAPTURE; - } - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Handles DCMI interrupt request. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for the DCMI. - * @retval None - */ -void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi) -{ - uint32_t isr_value = READ_REG(hdcmi->Instance->MISR); - - /* Synchronization error interrupt management *******************************/ - if((isr_value & DCMI_FLAG_ERRRI) == DCMI_FLAG_ERRRI) - { - /* Clear the Synchronization error flag */ - __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_ERRRI); - - /* Update error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_SYNC; - - /* Change DCMI state */ - hdcmi->State = HAL_DCMI_STATE_ERROR; - - /* Set the synchronization error callback */ - hdcmi->DMA_Handle->XferAbortCallback = DCMI_DMAError; - - /* Abort the DMA Transfer */ - HAL_DMA_Abort_IT(hdcmi->DMA_Handle); - } - /* Overflow interrupt management ********************************************/ - if((isr_value & DCMI_FLAG_OVRRI) == DCMI_FLAG_OVRRI) - { - /* Clear the Overflow flag */ - __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_OVRRI); - - /* Update error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_OVR; - - /* Change DCMI state */ - hdcmi->State = HAL_DCMI_STATE_ERROR; - - /* Set the overflow callback */ - hdcmi->DMA_Handle->XferAbortCallback = DCMI_DMAError; - - /* Abort the DMA Transfer */ - HAL_DMA_Abort_IT(hdcmi->DMA_Handle); - } - /* Line Interrupt management ************************************************/ - if((isr_value & DCMI_FLAG_LINERI) == DCMI_FLAG_LINERI) - { - /* Clear the Line interrupt flag */ - __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI); - - /* Line interrupt Callback */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - /*Call registered DCMI line event callback*/ - hdcmi->LineEventCallback(hdcmi); -#else - HAL_DCMI_LineEventCallback(hdcmi); -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ - } - /* VSYNC interrupt management ***********************************************/ - if((isr_value & DCMI_FLAG_VSYNCRI) == DCMI_FLAG_VSYNCRI) - { - /* Clear the VSYNC flag */ - __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_VSYNCRI); - - /* VSYNC Callback */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - /*Call registered DCMI vsync event callback*/ - hdcmi->VsyncEventCallback(hdcmi); -#else - HAL_DCMI_VsyncEventCallback(hdcmi); -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ - } - /* FRAME interrupt management ***********************************************/ - if((isr_value & DCMI_FLAG_FRAMERI) == DCMI_FLAG_FRAMERI) - { - /* When snapshot mode, disable Vsync, Error and Overrun interrupts */ - if((hdcmi->Instance->CR & DCMI_CR_CM) == DCMI_MODE_SNAPSHOT) - { - /* Disable the Line, Vsync, Error and Overrun interrupts */ - __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR); - } - - /* Disable the Frame interrupt */ - __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME); - - /* Frame Callback */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - /*Call registered DCMI frame event callback*/ - hdcmi->FrameEventCallback(hdcmi); -#else - HAL_DCMI_FrameEventCallback(hdcmi); -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Error DCMI callback. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval None - */ -__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdcmi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DCMI_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief Line Event callback. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval None - */ -__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdcmi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DCMI_LineEventCallback could be implemented in the user file - */ -} - -/** - * @brief VSYNC Event callback. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval None - */ -__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdcmi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DCMI_VsyncEventCallback could be implemented in the user file - */ -} - -/** - * @brief Frame Event callback. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval None - */ -__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdcmi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DCMI_FrameEventCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup DCMI_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== -[..] This section provides functions allowing to: - (+) Configure the CROP feature. - (+) Enable/Disable the CROP feature. - -@endverbatim - * @{ - */ - -/** - * @brief Configure the DCMI CROP coordinate. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @param X0 DCMI window X offset - * @param Y0 DCMI window Y offset - * @param XSize DCMI Pixel per line - * @param YSize DCMI Line number - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize) -{ - /* Process Locked */ - __HAL_LOCK(hdcmi); - - /* Lock the DCMI peripheral state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_DCMI_WINDOW_COORDINATE(X0)); - assert_param(IS_DCMI_WINDOW_COORDINATE(YSize)); - assert_param(IS_DCMI_WINDOW_COORDINATE(XSize)); - assert_param(IS_DCMI_WINDOW_HEIGHT(Y0)); - - /* Configure CROP */ - hdcmi->Instance->CWSIZER = (XSize | (YSize << DCMI_POSITION_CWSIZE_VLINE)); - hdcmi->Instance->CWSTRTR = (X0 | (Y0 << DCMI_POSITION_CWSTRT_VST)); - - /* Initialize the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - return HAL_OK; -} - -/** - * @brief Disable the Crop feature. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi) -{ - /* Process Locked */ - __HAL_LOCK(hdcmi); - - /* Lock the DCMI peripheral state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Disable DCMI Crop feature */ - hdcmi->Instance->CR &= ~(uint32_t)DCMI_CR_CROP; - - /* Change the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - return HAL_OK; -} - -/** - * @brief Enable the Crop feature. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi) -{ - /* Process Locked */ - __HAL_LOCK(hdcmi); - - /* Lock the DCMI peripheral state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Enable DCMI Crop feature */ - hdcmi->Instance->CR |= (uint32_t)DCMI_CR_CROP; - - /* Change the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - return HAL_OK; -} - -/** - * @brief Set embedded synchronization delimiters unmasks. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @param SyncUnmask pointer to a DCMI_SyncUnmaskTypeDef structure that contains - * the embedded synchronization delimiters unmasks. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_ConfigSyncUnmask(DCMI_HandleTypeDef *hdcmi, DCMI_SyncUnmaskTypeDef *SyncUnmask) -{ - /* Process Locked */ - __HAL_LOCK(hdcmi); - - /* Lock the DCMI peripheral state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - - /* Write DCMI embedded synchronization unmask register */ - hdcmi->Instance->ESUR = (((uint32_t)SyncUnmask->FrameStartUnmask) |\ - ((uint32_t)SyncUnmask->LineStartUnmask << DCMI_ESUR_LSU_Pos)|\ - ((uint32_t)SyncUnmask->LineEndUnmask << DCMI_ESUR_LEU_Pos)|\ - ((uint32_t)SyncUnmask->FrameEndUnmask << DCMI_ESUR_FEU_Pos)); - - /* Change the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdcmi); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup DCMI_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DCMI state. - (+) Get the specific DCMI error flag. - -@endverbatim - * @{ - */ - -/** - * @brief Return the DCMI state - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL state - */ -HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi) -{ - return hdcmi->State; -} - -/** - * @brief Return the DCMI error code - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval DCMI Error Code - */ -uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi) -{ - return hdcmi->ErrorCode; -} - -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) -/** - * @brief DCMI Callback registering - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @param CallbackID dcmi Callback ID - * @param pCallback pointer to DCMI_CallbackTypeDef structure - * @retval status - */ -HAL_StatusTypeDef HAL_DCMI_RegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID, pDCMI_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(pCallback == NULL) - { - /* update the error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - else - { - if(hdcmi->State == HAL_DCMI_STATE_READY) - { - switch (CallbackID) - { - case HAL_DCMI_FRAME_EVENT_CB_ID : - hdcmi->FrameEventCallback = pCallback; - break; - - case HAL_DCMI_VSYNC_EVENT_CB_ID : - hdcmi->VsyncEventCallback = pCallback; - break; - - case HAL_DCMI_LINE_EVENT_CB_ID : - hdcmi->LineEventCallback = pCallback; - break; - - case HAL_DCMI_ERROR_CB_ID : - hdcmi->ErrorCallback = pCallback; - break; - - case HAL_DCMI_MSPINIT_CB_ID : - hdcmi->MspInitCallback = pCallback; - break; - - case HAL_DCMI_MSPDEINIT_CB_ID : - hdcmi->MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if(hdcmi->State == HAL_DCMI_STATE_RESET) - { - switch (CallbackID) - { - case HAL_DCMI_MSPINIT_CB_ID : - hdcmi->MspInitCallback = pCallback; - break; - - case HAL_DCMI_MSPDEINIT_CB_ID : - hdcmi->MspDeInitCallback = pCallback; - break; - - default : - /* update the error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update the error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief DCMI Callback Unregistering - * @param hdcmi dcmi handle - * @param CallbackID dcmi Callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_DCMI_UnRegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(hdcmi->State == HAL_DCMI_STATE_READY) - { - switch (CallbackID) - { - case HAL_DCMI_FRAME_EVENT_CB_ID : - hdcmi->FrameEventCallback = HAL_DCMI_FrameEventCallback; /* Legacy weak FrameEventCallback */ - break; - - case HAL_DCMI_VSYNC_EVENT_CB_ID : - hdcmi->VsyncEventCallback = HAL_DCMI_VsyncEventCallback; /* Legacy weak VsyncEventCallback */ - break; - - case HAL_DCMI_LINE_EVENT_CB_ID : - hdcmi->LineEventCallback = HAL_DCMI_LineEventCallback; /* Legacy weak LineEventCallback */ - break; - - case HAL_DCMI_ERROR_CB_ID : - hdcmi->ErrorCallback = HAL_DCMI_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_DCMI_MSPINIT_CB_ID : - hdcmi->MspInitCallback = HAL_DCMI_MspInit; - break; - - case HAL_DCMI_MSPDEINIT_CB_ID : - hdcmi->MspDeInitCallback = HAL_DCMI_MspDeInit; - break; - - default : - /* update the error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if(hdcmi->State == HAL_DCMI_STATE_RESET) - { - switch (CallbackID) - { - case HAL_DCMI_MSPINIT_CB_ID : - hdcmi->MspInitCallback = HAL_DCMI_MspInit; - break; - - case HAL_DCMI_MSPDEINIT_CB_ID : - hdcmi->MspDeInitCallback = HAL_DCMI_MspDeInit; - break; - - default : - /* update the error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update the error code */ - hdcmi->ErrorCode |= HAL_DCMI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - return status; -} -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DCMI_Private_Functions DCMI Private Functions - * @{ - */ - -/** - * @brief DMA conversion complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void DCMI_DMAXferCplt(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp = 0U; - - DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - if(hdcmi->XferCount != 0U) - { - /* Update memory 0 address location */ - tmp = ((hdcmi->DMA_Handle->Instance->CR) & DMA_SxCR_CT); - if(((hdcmi->XferCount % 2U) == 0U) && (tmp != 0U)) - { - tmp = hdcmi->DMA_Handle->Instance->M0AR; - HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8U*hdcmi->XferSize)), MEMORY0); - hdcmi->XferCount--; - } - /* Update memory 1 address location */ - else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0U) - { - tmp = hdcmi->DMA_Handle->Instance->M1AR; - HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8U*hdcmi->XferSize)), MEMORY1); - hdcmi->XferCount--; - } - } - /* Update memory 0 address location */ - else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) != 0U) - { - hdcmi->DMA_Handle->Instance->M0AR = hdcmi->pBuffPtr; - } - /* Update memory 1 address location */ - else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0U) - { - tmp = hdcmi->pBuffPtr; - hdcmi->DMA_Handle->Instance->M1AR = (tmp + (4U*hdcmi->XferSize)); - hdcmi->XferCount = hdcmi->XferTransferNumber; - } - - /* Check if the frame is transferred */ - if(hdcmi->XferCount == hdcmi->XferTransferNumber) - { - /* Enable the Frame interrupt */ - __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME); - - /* When snapshot mode, set dcmi state to ready */ - if((hdcmi->Instance->CR & DCMI_CR_CM) == DCMI_MODE_SNAPSHOT) - { - hdcmi->State= HAL_DCMI_STATE_READY; - } - } -} - -/** - * @brief DMA error callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void DCMI_DMAError(DMA_HandleTypeDef *hdma) -{ - DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - if(hdcmi->DMA_Handle->ErrorCode != HAL_DMA_ERROR_FE) - { - /* Initialize the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - } - - /* DCMI error Callback */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - /*Call registered DCMI error callback*/ - hdcmi->ErrorCallback(hdcmi); -#else - HAL_DCMI_ErrorCallback(hdcmi); -#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */ - -} - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ - STM32F479xx */ -#endif /* HAL_DCMI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c deleted file mode 100644 index bbc64c6..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c +++ /dev/null @@ -1,182 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dcmi_ex.c - * @author MCD Application Team - * @brief DCMI Extension HAL module driver - * This file provides firmware functions to manage the following - * functionalities of DCMI extension peripheral: - * + Extension features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - @verbatim - ============================================================================== - ##### DCMI peripheral extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the DCMI interface for STM32F446xx - devices contains the following additional features : - - (+) Support of Black and White cameras - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to manage the Black and White feature - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -/** @defgroup DCMIEx DCMIEx - * @brief DCMI Extended HAL module driver - * @{ - */ - -#ifdef HAL_DCMI_MODULE_ENABLED - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) ||\ - defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DCMIEx_Exported_Functions DCMI Extended Exported Functions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions - * @{ - */ - -/** - * @brief Initializes the DCMI according to the specified - * parameters in the DCMI_InitTypeDef and create the associated handle. - * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains - * the configuration information for DCMI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi) -{ - /* Check the DCMI peripheral state */ - if(hdcmi == NULL) - { - return HAL_ERROR; - } - - /* Check function parameters */ - assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance)); - assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity)); - assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity)); - assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity)); - assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode)); - assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate)); - assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode)); - assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode)); -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - assert_param(IS_DCMI_BYTE_SELECT_MODE(hdcmi->Init.ByteSelectMode)); - assert_param(IS_DCMI_BYTE_SELECT_START(hdcmi->Init.ByteSelectStart)); - assert_param(IS_DCMI_LINE_SELECT_MODE(hdcmi->Init.LineSelectMode)); - assert_param(IS_DCMI_LINE_SELECT_START(hdcmi->Init.LineSelectStart)); -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ - if(hdcmi->State == HAL_DCMI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hdcmi->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - /* Init the DCMI Callback settings */ -#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1) - hdcmi->FrameEventCallback = HAL_DCMI_FrameEventCallback; /* Legacy weak FrameEventCallback */ - hdcmi->VsyncEventCallback = HAL_DCMI_VsyncEventCallback; /* Legacy weak VsyncEventCallback */ - hdcmi->LineEventCallback = HAL_DCMI_LineEventCallback; /* Legacy weak LineEventCallback */ - hdcmi->ErrorCallback = HAL_DCMI_ErrorCallback; /* Legacy weak ErrorCallback */ - - if(hdcmi->MspInitCallback == NULL) - { - /* Legacy weak MspInit Callback */ - hdcmi->MspInitCallback = HAL_DCMI_MspInit; - } - /* Initialize the low level hardware (MSP) */ - hdcmi->MspInitCallback(hdcmi); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_DCMI_MspInit(hdcmi); -#endif /* (USE_HAL_DCMI_REGISTER_CALLBACKS) */ - HAL_DCMI_MspInit(hdcmi); - } - - /* Change the DCMI state */ - hdcmi->State = HAL_DCMI_STATE_BUSY; - /* Configures the HS, VS, DE and PC polarity */ - hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 |\ - DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG |\ - DCMI_CR_ESS -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - | DCMI_CR_BSM_0 | DCMI_CR_BSM_1 | DCMI_CR_OEBS |\ - DCMI_CR_LSM | DCMI_CR_OELS -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ - ); - hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate |\ - hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity |\ - hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode |\ - hdcmi->Init.JPEGMode -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - | hdcmi->Init.ByteSelectMode |\ - hdcmi->Init.ByteSelectStart | hdcmi->Init.LineSelectMode |\ - hdcmi->Init.LineSelectStart -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ - ); - if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED) - { - hdcmi->Instance->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) | - ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << DCMI_POSITION_ESCR_LSC)| - ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << DCMI_POSITION_ESCR_LEC) | - ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << DCMI_POSITION_ESCR_FEC)); - - } - - /* Enable the Line, Vsync, Error and Overrun interrupts */ - __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR); - - /* Update error code */ - hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE; - - /* Initialize the DCMI state*/ - hdcmi->State = HAL_DCMI_STATE_READY; - - return HAL_OK; -} - -/** - * @} - */ -#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx ||\ - STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -#endif /* HAL_DCMI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dfsdm.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dfsdm.c deleted file mode 100644 index 79b94b1..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dfsdm.c +++ /dev/null @@ -1,4423 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dfsdm.c - * @author MCD Application Team - * @brief This file provides firmware functions to manage the following - * functionalities of the Digital Filter for Sigma-Delta Modulators - * (DFSDM) peripherals: - * + Initialization and configuration of channels and filters - * + Regular channels configuration - * + Injected channels configuration - * + Regular/Injected Channels DMA Configuration - * + Interrupts and flags management - * + Analog watchdog feature - * + Short-circuit detector feature - * + Extremes detector feature - * + Clock absence detector feature - * + Break generation on analog watchdog or short-circuit event - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - *** Channel initialization *** - ============================== - [..] - (#) User has first to initialize channels (before filters initialization). - (#) As prerequisite, fill in the HAL_DFSDM_ChannelMspInit() : - (++) Enable DFSDMz clock interface with __HAL_RCC_DFSDMz_CLK_ENABLE(). - (++) Enable the clocks for the DFSDMz GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). - (++) Configure these DFSDMz pins in alternate mode using HAL_GPIO_Init(). - (++) If interrupt mode is used, enable and configure DFSDMz_FLT0 global - interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). - (#) Configure the output clock, input, serial interface, analog watchdog, - offset and data right bit shift parameters for this channel using the - HAL_DFSDM_ChannelInit() function. - - *** Channel clock absence detector *** - ====================================== - [..] - (#) Start clock absence detector using HAL_DFSDM_ChannelCkabStart() or - HAL_DFSDM_ChannelCkabStart_IT(). - (#) In polling mode, use HAL_DFSDM_ChannelPollForCkab() to detect the clock - absence. - (#) In interrupt mode, HAL_DFSDM_ChannelCkabCallback() will be called if - clock absence is detected. - (#) Stop clock absence detector using HAL_DFSDM_ChannelCkabStop() or - HAL_DFSDM_ChannelCkabStop_IT(). - (#) Please note that the same mode (polling or interrupt) has to be used - for all channels because the channels are sharing the same interrupt. - (#) Please note also that in interrupt mode, if clock absence detector is - stopped for one channel, interrupt will be disabled for all channels. - - *** Channel short circuit detector *** - ====================================== - [..] - (#) Start short circuit detector using HAL_DFSDM_ChannelScdStart() or - or HAL_DFSDM_ChannelScdStart_IT(). - (#) In polling mode, use HAL_DFSDM_ChannelPollForScd() to detect short - circuit. - (#) In interrupt mode, HAL_DFSDM_ChannelScdCallback() will be called if - short circuit is detected. - (#) Stop short circuit detector using HAL_DFSDM_ChannelScdStop() or - or HAL_DFSDM_ChannelScdStop_IT(). - (#) Please note that the same mode (polling or interrupt) has to be used - for all channels because the channels are sharing the same interrupt. - (#) Please note also that in interrupt mode, if short circuit detector is - stopped for one channel, interrupt will be disabled for all channels. - - *** Channel analog watchdog value *** - ===================================== - [..] - (#) Get analog watchdog filter value of a channel using - HAL_DFSDM_ChannelGetAwdValue(). - - *** Channel offset value *** - ===================================== - [..] - (#) Modify offset value of a channel using HAL_DFSDM_ChannelModifyOffset(). - - *** Filter initialization *** - ============================= - [..] - (#) After channel initialization, user has to init filters. - (#) As prerequisite, fill in the HAL_DFSDM_FilterMspInit() : - (++) If interrupt mode is used , enable and configure DFSDMz_FLTx global - interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). - Please note that DFSDMz_FLT0 global interrupt could be already - enabled if interrupt is used for channel. - (++) If DMA mode is used, configure DMA with HAL_DMA_Init() and link it - with DFSDMz filter handle using __HAL_LINKDMA(). - (#) Configure the regular conversion, injected conversion and filter - parameters for this filter using the HAL_DFSDM_FilterInit() function. - - *** Filter regular channel conversion *** - ========================================= - [..] - (#) Select regular channel and enable/disable continuous mode using - HAL_DFSDM_FilterConfigRegChannel(). - (#) Start regular conversion using HAL_DFSDM_FilterRegularStart(), - HAL_DFSDM_FilterRegularStart_IT(), HAL_DFSDM_FilterRegularStart_DMA() or - HAL_DFSDM_FilterRegularMsbStart_DMA(). - (#) In polling mode, use HAL_DFSDM_FilterPollForRegConversion() to detect - the end of regular conversion. - (#) In interrupt mode, HAL_DFSDM_FilterRegConvCpltCallback() will be called - at the end of regular conversion. - (#) Get value of regular conversion and corresponding channel using - HAL_DFSDM_FilterGetRegularValue(). - (#) In DMA mode, HAL_DFSDM_FilterRegConvHalfCpltCallback() and - HAL_DFSDM_FilterRegConvCpltCallback() will be called respectively at the - half transfer and at the transfer complete. Please note that - HAL_DFSDM_FilterRegConvHalfCpltCallback() will be called only in DMA - circular mode. - (#) Stop regular conversion using HAL_DFSDM_FilterRegularStop(), - HAL_DFSDM_FilterRegularStop_IT() or HAL_DFSDM_FilterRegularStop_DMA(). - - *** Filter injected channels conversion *** - =========================================== - [..] - (#) Select injected channels using HAL_DFSDM_FilterConfigInjChannel(). - (#) Start injected conversion using HAL_DFSDM_FilterInjectedStart(), - HAL_DFSDM_FilterInjectedStart_IT(), HAL_DFSDM_FilterInjectedStart_DMA() or - HAL_DFSDM_FilterInjectedMsbStart_DMA(). - (#) In polling mode, use HAL_DFSDM_FilterPollForInjConversion() to detect - the end of injected conversion. - (#) In interrupt mode, HAL_DFSDM_FilterInjConvCpltCallback() will be called - at the end of injected conversion. - (#) Get value of injected conversion and corresponding channel using - HAL_DFSDM_FilterGetInjectedValue(). - (#) In DMA mode, HAL_DFSDM_FilterInjConvHalfCpltCallback() and - HAL_DFSDM_FilterInjConvCpltCallback() will be called respectively at the - half transfer and at the transfer complete. Please note that - HAL_DFSDM_FilterInjConvCpltCallback() will be called only in DMA - circular mode. - (#) Stop injected conversion using HAL_DFSDM_FilterInjectedStop(), - HAL_DFSDM_FilterInjectedStop_IT() or HAL_DFSDM_FilterInjectedStop_DMA(). - - *** Filter analog watchdog *** - ============================== - [..] - (#) Start filter analog watchdog using HAL_DFSDM_FilterAwdStart_IT(). - (#) HAL_DFSDM_FilterAwdCallback() will be called if analog watchdog occurs. - (#) Stop filter analog watchdog using HAL_DFSDM_FilterAwdStop_IT(). - - *** Filter extreme detector *** - =============================== - [..] - (#) Start filter extreme detector using HAL_DFSDM_FilterExdStart(). - (#) Get extreme detector maximum value using HAL_DFSDM_FilterGetExdMaxValue(). - (#) Get extreme detector minimum value using HAL_DFSDM_FilterGetExdMinValue(). - (#) Start filter extreme detector using HAL_DFSDM_FilterExdStop(). - - *** Filter conversion time *** - ============================== - [..] - (#) Get conversion time value using HAL_DFSDM_FilterGetConvTimeValue(). - - *** Callback registration *** - ============================= - [..] - The compilation define USE_HAL_DFSDM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use functions HAL_DFSDM_Channel_RegisterCallback(), - HAL_DFSDM_Filter_RegisterCallback() or - HAL_DFSDM_Filter_RegisterAwdCallback() to register a user callback. - - [..] - Function HAL_DFSDM_Channel_RegisterCallback() allows to register - following callbacks: - (+) CkabCallback : DFSDM channel clock absence detection callback. - (+) ScdCallback : DFSDM channel short circuit detection callback. - (+) MspInitCallback : DFSDM channel MSP init callback. - (+) MspDeInitCallback : DFSDM channel MSP de-init callback. - [..] - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Function HAL_DFSDM_Filter_RegisterCallback() allows to register - following callbacks: - (+) RegConvCpltCallback : DFSDM filter regular conversion complete callback. - (+) RegConvHalfCpltCallback : DFSDM filter half regular conversion complete callback. - (+) InjConvCpltCallback : DFSDM filter injected conversion complete callback. - (+) InjConvHalfCpltCallback : DFSDM filter half injected conversion complete callback. - (+) ErrorCallback : DFSDM filter error callback. - (+) MspInitCallback : DFSDM filter MSP init callback. - (+) MspDeInitCallback : DFSDM filter MSP de-init callback. - [..] - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - For specific DFSDM filter analog watchdog callback use dedicated register callback: - HAL_DFSDM_Filter_RegisterAwdCallback(). - - [..] - Use functions HAL_DFSDM_Channel_UnRegisterCallback() or - HAL_DFSDM_Filter_UnRegisterCallback() to reset a callback to the default - weak function. - - [..] - HAL_DFSDM_Channel_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - [..] - This function allows to reset following callbacks: - (+) CkabCallback : DFSDM channel clock absence detection callback. - (+) ScdCallback : DFSDM channel short circuit detection callback. - (+) MspInitCallback : DFSDM channel MSP init callback. - (+) MspDeInitCallback : DFSDM channel MSP de-init callback. - - [..] - HAL_DFSDM_Filter_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - [..] - This function allows to reset following callbacks: - (+) RegConvCpltCallback : DFSDM filter regular conversion complete callback. - (+) RegConvHalfCpltCallback : DFSDM filter half regular conversion complete callback. - (+) InjConvCpltCallback : DFSDM filter injected conversion complete callback. - (+) InjConvHalfCpltCallback : DFSDM filter half injected conversion complete callback. - (+) ErrorCallback : DFSDM filter error callback. - (+) MspInitCallback : DFSDM filter MSP init callback. - (+) MspDeInitCallback : DFSDM filter MSP de-init callback. - - [..] - For specific DFSDM filter analog watchdog callback use dedicated unregister callback: - HAL_DFSDM_Filter_UnRegisterAwdCallback(). - - [..] - By default, after the call of init function and if the state is RESET - all callbacks are reset to the corresponding legacy weak functions: - examples HAL_DFSDM_ChannelScdCallback(), HAL_DFSDM_FilterErrorCallback(). - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak functions in the init and de-init only when these - callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the init and de-init keep and use - the user MspInit/MspDeInit callbacks (registered beforehand) - - [..] - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the init/de-init. - In that case first register the MspInit/MspDeInit user callbacks using - HAL_DFSDM_Channel_RegisterCallback() or - HAL_DFSDM_Filter_RegisterCallback() before calling init or de-init function. - - [..] - When The compilation define USE_HAL_DFSDM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak callbacks are used. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#ifdef HAL_DFSDM_MODULE_ENABLED -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup DFSDM DFSDM - * @brief DFSDM HAL driver module - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup DFSDM_Private_Define DFSDM Private Define - * @{ - */ - -#define DFSDM_FLTCR1_MSB_RCH_OFFSET 8U - -#define DFSDM_MSB_MASK 0xFFFF0000U -#define DFSDM_LSB_MASK 0x0000FFFFU -#define DFSDM_CKAB_TIMEOUT 5000U -#define DFSDM1_CHANNEL_NUMBER 4U -#if defined (DFSDM2_Channel0) -#define DFSDM2_CHANNEL_NUMBER 8U -#endif /* DFSDM2_Channel0 */ - -/** - * @} - */ -/** @addtogroup DFSDM_Private_Macros -* @{ -*/ - -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup DFSDM_Private_Variables DFSDM Private Variables - * @{ - */ -__IO uint32_t v_dfsdm1ChannelCounter = 0U; -DFSDM_Channel_HandleTypeDef* a_dfsdm1ChannelHandle[DFSDM1_CHANNEL_NUMBER] = {NULL}; - -#if defined (DFSDM2_Channel0) -__IO uint32_t v_dfsdm2ChannelCounter = 0U; -DFSDM_Channel_HandleTypeDef* a_dfsdm2ChannelHandle[DFSDM2_CHANNEL_NUMBER] = {NULL}; -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup DFSDM_Private_Functions DFSDM Private Functions - * @{ - */ -static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels); -static uint32_t DFSDM_GetChannelFromInstance(DFSDM_Channel_TypeDef* Instance); -static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); -static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter); -static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter); -static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter); -static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma); -static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma); -static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma); -static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma); -static void DFSDM_DMAError(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DFSDM_Exported_Functions DFSDM Exported Functions - * @{ - */ - -/** @defgroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions - * @brief Channel initialization and de-initialization functions - * -@verbatim - ============================================================================== - ##### Channel initialization and de-initialization functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the DFSDM channel. - (+) De-initialize the DFSDM channel. -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DFSDM channel according to the specified parameters - * in the DFSDM_ChannelInitTypeDef structure and initialize the associated handle. - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ -#if defined(DFSDM2_Channel0) - __IO uint32_t* channelCounterPtr; - DFSDM_Channel_HandleTypeDef **channelHandleTable; - DFSDM_Channel_TypeDef* channel0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check DFSDM Channel handle */ - if(hdfsdm_channel == NULL) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - assert_param(IS_FUNCTIONAL_STATE(hdfsdm_channel->Init.OutputClock.Activation)); - assert_param(IS_DFSDM_CHANNEL_INPUT(hdfsdm_channel->Init.Input.Multiplexer)); - assert_param(IS_DFSDM_CHANNEL_DATA_PACKING(hdfsdm_channel->Init.Input.DataPacking)); - assert_param(IS_DFSDM_CHANNEL_INPUT_PINS(hdfsdm_channel->Init.Input.Pins)); - assert_param(IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(hdfsdm_channel->Init.SerialInterface.Type)); - assert_param(IS_DFSDM_CHANNEL_SPI_CLOCK(hdfsdm_channel->Init.SerialInterface.SpiClock)); - assert_param(IS_DFSDM_CHANNEL_FILTER_ORDER(hdfsdm_channel->Init.Awd.FilterOrder)); - assert_param(IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(hdfsdm_channel->Init.Awd.Oversampling)); - assert_param(IS_DFSDM_CHANNEL_OFFSET(hdfsdm_channel->Init.Offset)); - assert_param(IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(hdfsdm_channel->Init.RightBitShift)); - -#if defined(DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - channelCounterPtr = &v_dfsdm1ChannelCounter; - channelHandleTable = a_dfsdm1ChannelHandle; - channel0Instance = DFSDM1_Channel0; - } - else - { - channelCounterPtr = &v_dfsdm2ChannelCounter; - channelHandleTable = a_dfsdm2ChannelHandle; - channel0Instance = DFSDM2_Channel0; - } - - /* Check that channel has not been already initialized */ - if(channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL) - { - return HAL_ERROR; - } - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - /* Reset callback pointers to the weak predefined callbacks */ - hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; - hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; - - /* Call MSP init function */ - if(hdfsdm_channel->MspInitCallback == NULL) - { - hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; - } - hdfsdm_channel->MspInitCallback(hdfsdm_channel); -#else - /* Call MSP init function */ - HAL_DFSDM_ChannelMspInit(hdfsdm_channel); -#endif - - /* Update the channel counter */ - (*channelCounterPtr)++; - - /* Configure output serial clock and enable global DFSDM interface only for first channel */ - if(*channelCounterPtr == 1U) - { - assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection)); - /* Set the output serial clock source */ - channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC); - channel0Instance->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection; - - /* Reset clock divider */ - channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV); - if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE) - { - assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider)); - /* Set the output clock divider */ - channel0Instance->CHCFGR1 |= (uint32_t) ((hdfsdm_channel->Init.OutputClock.Divider - 1U) << - DFSDM_CHCFGR1_CKOUTDIV_Pos); - } - - /* enable the DFSDM global interface */ - channel0Instance->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN; - } - - /* Set channel input parameters */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX | - DFSDM_CHCFGR1_CHINSEL); - hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer | - hdfsdm_channel->Init.Input.DataPacking | - hdfsdm_channel->Init.Input.Pins); - - /* Set serial interface parameters */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL); - hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type | - hdfsdm_channel->Init.SerialInterface.SpiClock); - - /* Set analog watchdog parameters */ - hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR); - hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder | - ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_AWFOSR_Pos)); - - /* Set channel offset and right bit shift */ - hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS); - hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_Pos) | - (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_Pos)); - - /* Enable DFSDM channel */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN; - - /* Set DFSDM Channel to ready state */ - hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY; - - /* Store channel handle in DFSDM channel handle table */ - channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel; - -#else - /* Check that channel has not been already initialized */ - if(a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL) - { - return HAL_ERROR; - } - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - /* Reset callback pointers to the weak predefined callbacks */ - hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; - hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; - - /* Call MSP init function */ - if(hdfsdm_channel->MspInitCallback == NULL) - { - hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; - } - hdfsdm_channel->MspInitCallback(hdfsdm_channel); -#else - /* Call MSP init function */ - HAL_DFSDM_ChannelMspInit(hdfsdm_channel); -#endif - - /* Update the channel counter */ - v_dfsdm1ChannelCounter++; - - /* Configure output serial clock and enable global DFSDM interface only for first channel */ - if(v_dfsdm1ChannelCounter == 1U) - { - assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection)); - /* Set the output serial clock source */ - DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC); - DFSDM1_Channel0->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection; - - /* Reset clock divider */ - DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV); - if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE) - { - assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider)); - /* Set the output clock divider */ - DFSDM1_Channel0->CHCFGR1 |= (uint32_t) ((hdfsdm_channel->Init.OutputClock.Divider - 1U) << - DFSDM_CHCFGR1_CKOUTDIV_Pos); - } - - /* enable the DFSDM global interface */ - DFSDM1_Channel0->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN; - } - - /* Set channel input parameters */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX | - DFSDM_CHCFGR1_CHINSEL); - hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer | - hdfsdm_channel->Init.Input.DataPacking | - hdfsdm_channel->Init.Input.Pins); - - /* Set serial interface parameters */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL); - hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type | - hdfsdm_channel->Init.SerialInterface.SpiClock); - - /* Set analog watchdog parameters */ - hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR); - hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder | - ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_AWFOSR_Pos)); - - /* Set channel offset and right bit shift */ - hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS); - hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_Pos) | - (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_Pos)); - - /* Enable DFSDM channel */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN; - - /* Set DFSDM Channel to ready state */ - hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY; - - /* Store channel handle in DFSDM channel handle table */ - a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel; -#endif /* DFSDM2_Channel0 */ - - return HAL_OK; -} - -/** - * @brief De-initialize the DFSDM channel. - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ -#if defined(DFSDM2_Channel0) - __IO uint32_t* channelCounterPtr; - DFSDM_Channel_HandleTypeDef **channelHandleTable; - DFSDM_Channel_TypeDef* channel0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check DFSDM Channel handle */ - if(hdfsdm_channel == NULL) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - -#if defined(DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - channelCounterPtr = &v_dfsdm1ChannelCounter; - channelHandleTable = a_dfsdm1ChannelHandle; - channel0Instance = DFSDM1_Channel0; - } - else - { - channelCounterPtr = &v_dfsdm2ChannelCounter; - channelHandleTable = a_dfsdm2ChannelHandle; - channel0Instance = DFSDM2_Channel0; - } - - /* Check that channel has not been already deinitialized */ - if(channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL) - { - return HAL_ERROR; - } - - /* Disable the DFSDM channel */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN); - - /* Update the channel counter */ - (*channelCounterPtr)--; - - /* Disable global DFSDM at deinit of last channel */ - if(*channelCounterPtr == 0U) - { - channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN); - } - - /* Call MSP deinit function */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - if(hdfsdm_channel->MspDeInitCallback == NULL) - { - hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; - } - hdfsdm_channel->MspDeInitCallback(hdfsdm_channel); -#else - HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel); -#endif - - /* Set DFSDM Channel in reset state */ - hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET; - - /* Reset channel handle in DFSDM channel handle table */ - channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = NULL; -#else - /* Check that channel has not been already deinitialized */ - if(a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL) - { - return HAL_ERROR; - } - - /* Disable the DFSDM channel */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN); - - /* Update the channel counter */ - v_dfsdm1ChannelCounter--; - - /* Disable global DFSDM at deinit of last channel */ - if(v_dfsdm1ChannelCounter == 0U) - { - DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN); - } - - /* Call MSP deinit function */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - if(hdfsdm_channel->MspDeInitCallback == NULL) - { - hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; - } - hdfsdm_channel->MspDeInitCallback(hdfsdm_channel); -#else - HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel); -#endif - - /* Set DFSDM Channel in reset state */ - hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET; - - /* Reset channel handle in DFSDM channel handle table */ - a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = (DFSDM_Channel_HandleTypeDef *) NULL; -#endif /* defined(DFSDM2_Channel0) */ - - return HAL_OK; -} - -/** - * @brief Initialize the DFSDM channel MSP. - * @param hdfsdm_channel DFSDM channel handle. - * @retval None - */ -__weak void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_channel); - /* NOTE : This function should not be modified, when the function is needed, - the HAL_DFSDM_ChannelMspInit could be implemented in the user file. - */ -} - -/** - * @brief De-initialize the DFSDM channel MSP. - * @param hdfsdm_channel DFSDM channel handle. - * @retval None - */ -__weak void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_channel); - /* NOTE : This function should not be modified, when the function is needed, - the HAL_DFSDM_ChannelMspDeInit could be implemented in the user file. - */ -} - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a user DFSDM channel callback - * to be used instead of the weak predefined callback. - * @param hdfsdm_channel DFSDM channel handle. - * @param CallbackID ID of the callback to be registered. - * This parameter can be one of the following values: - * @arg @ref HAL_DFSDM_CHANNEL_CKAB_CB_ID clock absence detection callback ID. - * @arg @ref HAL_DFSDM_CHANNEL_SCD_CB_ID short circuit detection callback ID. - * @arg @ref HAL_DFSDM_CHANNEL_MSPINIT_CB_ID MSP init callback ID. - * @arg @ref HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID MSP de-init callback ID. - * @param pCallback pointer to the callback function. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_Channel_RegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID, - pDFSDM_Channel_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(pCallback == NULL) - { - /* update return status */ - status = HAL_ERROR; - } - else - { - if(HAL_DFSDM_CHANNEL_STATE_READY == hdfsdm_channel->State) - { - switch (CallbackID) - { - case HAL_DFSDM_CHANNEL_CKAB_CB_ID : - hdfsdm_channel->CkabCallback = pCallback; - break; - case HAL_DFSDM_CHANNEL_SCD_CB_ID : - hdfsdm_channel->ScdCallback = pCallback; - break; - case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : - hdfsdm_channel->MspInitCallback = pCallback; - break; - case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : - hdfsdm_channel->MspDeInitCallback = pCallback; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if(HAL_DFSDM_CHANNEL_STATE_RESET == hdfsdm_channel->State) - { - switch (CallbackID) - { - case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : - hdfsdm_channel->MspInitCallback = pCallback; - break; - case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : - hdfsdm_channel->MspDeInitCallback = pCallback; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update return status */ - status = HAL_ERROR; - } - } - return status; -} - -/** - * @brief Unregister a user DFSDM channel callback. - * DFSDM channel callback is redirected to the weak predefined callback. - * @param hdfsdm_channel DFSDM channel handle. - * @param CallbackID ID of the callback to be unregistered. - * This parameter can be one of the following values: - * @arg @ref HAL_DFSDM_CHANNEL_CKAB_CB_ID clock absence detection callback ID. - * @arg @ref HAL_DFSDM_CHANNEL_SCD_CB_ID short circuit detection callback ID. - * @arg @ref HAL_DFSDM_CHANNEL_MSPINIT_CB_ID MSP init callback ID. - * @arg @ref HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID MSP de-init callback ID. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_Channel_UnRegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(HAL_DFSDM_CHANNEL_STATE_READY == hdfsdm_channel->State) - { - switch (CallbackID) - { - case HAL_DFSDM_CHANNEL_CKAB_CB_ID : - hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; - break; - case HAL_DFSDM_CHANNEL_SCD_CB_ID : - hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; - break; - case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : - hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; - break; - case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : - hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if(HAL_DFSDM_CHANNEL_STATE_RESET == hdfsdm_channel->State) - { - switch (CallbackID) - { - case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : - hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; - break; - case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : - hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update return status */ - status = HAL_ERROR; - } - return status; -} -#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions - * @brief Channel operation functions - * -@verbatim - ============================================================================== - ##### Channel operation functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Manage clock absence detector feature. - (+) Manage short circuit detector feature. - (+) Get analog watchdog value. - (+) Modify offset value. -@endverbatim - * @{ - */ - -/** - * @brief This function allows to start clock absence detection in polling mode. - * @note Same mode has to be used for all channels. - * @note If clock is not available on this channel during 5 seconds, - * clock absence detection will not be activated and function - * will return HAL_TIMEOUT error. - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tickstart; - uint32_t channel; - -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { -#if defined (DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Clear clock absence flag */ - while((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) - { - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Check the Timeout */ - if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) - { - /* Set timeout status */ - status = HAL_TIMEOUT; - break; - } - } -#else - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Clear clock absence flag */ - while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) - { - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Check the Timeout */ - if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) - { - /* Set timeout status */ - status = HAL_TIMEOUT; - break; - } - } -#endif /* DFSDM2_Channel0 */ - - if(status == HAL_OK) - { - /* Start clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; - } - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to poll for the clock absence detection. - * @param hdfsdm_channel DFSDM channel handle. - * @param Timeout Timeout value in milliseconds. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - uint32_t Timeout) -{ - uint32_t tickstart; - uint32_t channel; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - return HAL_ERROR; - } - else - { -#if defined(DFSDM2_Channel0) - - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait clock absence detection */ - while((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) == 0U) - { - /* Check the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) - { - /* Return timeout status */ - return HAL_TIMEOUT; - } - } - } - - /* Clear clock absence detection flag */ - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); -#else - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait clock absence detection */ - while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) == 0U) - { - /* Check the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) - { - /* Return timeout status */ - return HAL_TIMEOUT; - } - } - } - - /* Clear clock absence detection flag */ - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); -#endif /* defined(DFSDM2_Channel0) */ - /* Return function status */ - return HAL_OK; - } -} - -/** - * @brief This function allows to stop clock absence detection in polling mode. - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t channel; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { -#if defined(DFSDM2_Channel0) - - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - /* Stop clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); - - /* Clear clock absence flag */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - -#else - /* Stop clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); - - /* Clear clock absence flag */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); -#endif /* DFSDM2_Channel0 */ - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start clock absence detection in interrupt mode. - * @note Same mode has to be used for all channels. - * @note If clock is not available on this channel during 5 seconds, - * clock absence detection will not be activated and function - * will return HAL_TIMEOUT error. - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t channel; - uint32_t tickstart; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { -#if defined(DFSDM2_Channel0) - - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Clear clock absence flag */ - while((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) - { - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Check the Timeout */ - if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) - { - /* Set timeout status */ - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { - /* Activate clock absence detection interrupt */ - filter0Instance->FLTCR2 |= DFSDM_FLTCR2_CKABIE; - - /* Start clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; - } -#else - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Clear clock absence flag */ - while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) - { - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Check the Timeout */ - if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) - { - /* Set timeout status */ - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { - /* Activate clock absence detection interrupt */ - DFSDM1_Filter0->FLTCR2 |= DFSDM_FLTCR2_CKABIE; - - /* Start clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; - } - -#endif /* defined(DFSDM2_Channel0) */ - } - /* Return function status */ - return status; -} - -/** - * @brief Clock absence detection callback. - * @param hdfsdm_channel DFSDM channel handle. - * @retval None - */ -__weak void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_channel); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_ChannelCkabCallback could be implemented in the user file - */ -} - -/** - * @brief This function allows to stop clock absence detection in interrupt mode. - * @note Interrupt will be disabled for all channels - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t channel; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { -#if defined(DFSDM2_Channel0) - - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - /* Stop clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); - - /* Clear clock absence flag */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Disable clock absence detection interrupt */ - filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE); -#else - - /* Stop clock absence detection */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); - - /* Clear clock absence flag */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Disable clock absence detection interrupt */ - DFSDM1_Filter0->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE); -#endif /* DFSDM2_Channel0 */ - } - - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start short circuit detection in polling mode. - * @note Same mode has to be used for all channels - * @param hdfsdm_channel DFSDM channel handle. - * @param Threshold Short circuit detector threshold. - * This parameter must be a number between Min_Data = 0 and Max_Data = 255. - * @param BreakSignal Break signals assigned to short circuit event. - * This parameter can be a values combination of @ref DFSDM_BreakSignals. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - uint32_t Threshold, - uint32_t BreakSignal) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold)); - assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Configure threshold and break signals */ - hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT); - hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \ - Threshold); - - /* Start short circuit detection */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to poll for the short circuit detection. - * @param hdfsdm_channel DFSDM channel handle. - * @param Timeout Timeout value in milliseconds. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - uint32_t Timeout) -{ - uint32_t tickstart; - uint32_t channel; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - return HAL_ERROR; - } - else - { - /* Get channel number from channel instance */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - -#if defined(DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait short circuit detection */ - while(((filter0Instance->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_Pos + channel)) == 0U) - { - /* Check the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) - { - /* Return timeout status */ - return HAL_TIMEOUT; - } - } - } - - /* Clear short circuit detection flag */ - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); - -#else - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait short circuit detection */ - while(((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_Pos + channel)) == 0U) - { - /* Check the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) - { - /* Return timeout status */ - return HAL_TIMEOUT; - } - } - } - - /* Clear short circuit detection flag */ - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); -#endif /* DFSDM2_Channel0 */ - - /* Return function status */ - return HAL_OK; - } -} - -/** - * @brief This function allows to stop short circuit detection in polling mode. - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t channel; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Stop short circuit detection */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN); - - /* Clear short circuit detection flag */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); - -#if defined(DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); -#else - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); -#endif /* DFSDM2_Channel0*/ - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start short circuit detection in interrupt mode. - * @note Same mode has to be used for all channels - * @param hdfsdm_channel DFSDM channel handle. - * @param Threshold Short circuit detector threshold. - * This parameter must be a number between Min_Data = 0 and Max_Data = 255. - * @param BreakSignal Break signals assigned to short circuit event. - * This parameter can be a values combination of @ref DFSDM_BreakSignals. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - uint32_t Threshold, - uint32_t BreakSignal) -{ - HAL_StatusTypeDef status = HAL_OK; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold)); - assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { -#if defined(DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - /* Activate short circuit detection interrupt */ - filter0Instance->FLTCR2 |= DFSDM_FLTCR2_SCDIE; -#else - /* Activate short circuit detection interrupt */ - DFSDM1_Filter0->FLTCR2 |= DFSDM_FLTCR2_SCDIE; -#endif /* DFSDM2_Channel0 */ - - /* Configure threshold and break signals */ - hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT); - hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \ - Threshold); - - /* Start short circuit detection */ - hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN; - } - /* Return function status */ - return status; -} - -/** - * @brief Short circuit detection callback. - * @param hdfsdm_channel DFSDM channel handle. - * @retval None - */ -__weak void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_channel); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_ChannelScdCallback could be implemented in the user file - */ -} - -/** - * @brief This function allows to stop short circuit detection in interrupt mode. - * @note Interrupt will be disabled for all channels - * @param hdfsdm_channel DFSDM channel handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t channel; -#if defined(DFSDM2_Channel0) - DFSDM_Filter_TypeDef* filter0Instance; -#endif /* defined(DFSDM2_Channel0) */ - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Stop short circuit detection */ - hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN); - - /* Clear short circuit detection flag */ - channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); -#if defined(DFSDM2_Channel0) - /* Get channel counter, channel handle table and channel 0 instance */ - if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) - { - filter0Instance = DFSDM1_Filter0; - } - else - { - filter0Instance = DFSDM2_Filter0; - } - - filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); - - /* Disable short circuit detection interrupt */ - filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE); -#else - DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); - - /* Disable short circuit detection interrupt */ - DFSDM1_Filter0->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE); -#endif /* DFSDM2_Channel0 */ - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to get channel analog watchdog value. - * @param hdfsdm_channel DFSDM channel handle. - * @retval Channel analog watchdog value. - */ -int16_t HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - return (int16_t) hdfsdm_channel->Instance->CHWDATAR; -} - -/** - * @brief This function allows to modify channel offset value. - * @param hdfsdm_channel DFSDM channel handle. - * @param Offset DFSDM channel offset. - * This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, - int32_t Offset) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); - assert_param(IS_DFSDM_CHANNEL_OFFSET(Offset)); - - /* Check DFSDM channel state */ - if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Modify channel offset */ - hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET); - hdfsdm_channel->Instance->CHCFGR2 |= ((uint32_t) Offset << DFSDM_CHCFGR2_OFFSET_Pos); - } - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function - * @brief Channel state function - * -@verbatim - ============================================================================== - ##### Channel state function ##### - ============================================================================== - [..] This section provides function allowing to: - (+) Get channel handle state. -@endverbatim - * @{ - */ - -/** - * @brief This function allows to get the current DFSDM channel handle state. - * @param hdfsdm_channel DFSDM channel handle. - * @retval DFSDM channel state. - */ -HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) -{ - /* Return DFSDM channel handle state */ - return hdfsdm_channel->State; -} - -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions - * @brief Filter initialization and de-initialization functions - * -@verbatim - ============================================================================== - ##### Filter initialization and de-initialization functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the DFSDM filter. - (+) De-initialize the DFSDM filter. -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DFSDM filter according to the specified parameters - * in the DFSDM_FilterInitTypeDef structure and initialize the associated handle. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Check DFSDM Channel handle */ - if(hdfsdm_filter == NULL) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(IS_DFSDM_FILTER_REG_TRIGGER(hdfsdm_filter->Init.RegularParam.Trigger)); - assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.FastMode)); - assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.DmaMode)); - assert_param(IS_DFSDM_FILTER_INJ_TRIGGER(hdfsdm_filter->Init.InjectedParam.Trigger)); - assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.ScanMode)); - assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.DmaMode)); - assert_param(IS_DFSDM_FILTER_SINC_ORDER(hdfsdm_filter->Init.FilterParam.SincOrder)); - assert_param(IS_DFSDM_FILTER_OVS_RATIO(hdfsdm_filter->Init.FilterParam.Oversampling)); - assert_param(IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(hdfsdm_filter->Init.FilterParam.IntOversampling)); - - /* Check parameters compatibility */ - if((hdfsdm_filter->Instance == DFSDM1_Filter0) && - ((hdfsdm_filter->Init.RegularParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER) || - (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER))) - { - return HAL_ERROR; - } -#if defined (DFSDM2_Channel0) - if((hdfsdm_filter->Instance == DFSDM2_Filter0) && - ((hdfsdm_filter->Init.RegularParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER) || - (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER))) - { - return HAL_ERROR; - } -#endif /* DFSDM2_Channel0 */ - - /* Initialize DFSDM filter variables with default values */ - hdfsdm_filter->RegularContMode = DFSDM_CONTINUOUS_CONV_OFF; - hdfsdm_filter->InjectedChannelsNbr = 1U; - hdfsdm_filter->InjConvRemaining = 1U; - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_NONE; - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - /* Reset callback pointers to the weak predefined callbacks */ - hdfsdm_filter->AwdCallback = HAL_DFSDM_FilterAwdCallback; - hdfsdm_filter->RegConvCpltCallback = HAL_DFSDM_FilterRegConvCpltCallback; - hdfsdm_filter->RegConvHalfCpltCallback = HAL_DFSDM_FilterRegConvHalfCpltCallback; - hdfsdm_filter->InjConvCpltCallback = HAL_DFSDM_FilterInjConvCpltCallback; - hdfsdm_filter->InjConvHalfCpltCallback = HAL_DFSDM_FilterInjConvHalfCpltCallback; - hdfsdm_filter->ErrorCallback = HAL_DFSDM_FilterErrorCallback; - - /* Call MSP init function */ - if(hdfsdm_filter->MspInitCallback == NULL) - { - hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; - } - hdfsdm_filter->MspInitCallback(hdfsdm_filter); -#else - /* Call MSP init function */ - HAL_DFSDM_FilterMspInit(hdfsdm_filter); -#endif - - /* Set regular parameters */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC); - if(hdfsdm_filter->Init.RegularParam.FastMode == ENABLE) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_FAST; - } - else - { - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_FAST); - } - - if(hdfsdm_filter->Init.RegularParam.DmaMode == ENABLE) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RDMAEN; - } - else - { - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RDMAEN); - } - - /* Set injected parameters */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC | DFSDM_FLTCR1_JEXTEN | DFSDM_FLTCR1_JEXTSEL); - if(hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_EXT_TRIGGER) - { - assert_param(IS_DFSDM_FILTER_EXT_TRIG(hdfsdm_filter->Init.InjectedParam.ExtTrigger)); - assert_param(IS_DFSDM_FILTER_EXT_TRIG_EDGE(hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge)); - hdfsdm_filter->Instance->FLTCR1 |= (hdfsdm_filter->Init.InjectedParam.ExtTrigger); - } - - if(hdfsdm_filter->Init.InjectedParam.ScanMode == ENABLE) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSCAN; - } - else - { - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSCAN); - } - - if(hdfsdm_filter->Init.InjectedParam.DmaMode == ENABLE) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JDMAEN; - } - else - { - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JDMAEN); - } - - /* Set filter parameters */ - hdfsdm_filter->Instance->FLTFCR &= ~(DFSDM_FLTFCR_FORD | DFSDM_FLTFCR_FOSR | DFSDM_FLTFCR_IOSR); - hdfsdm_filter->Instance->FLTFCR |= (hdfsdm_filter->Init.FilterParam.SincOrder | - ((hdfsdm_filter->Init.FilterParam.Oversampling - 1U) << DFSDM_FLTFCR_FOSR_Pos) | - (hdfsdm_filter->Init.FilterParam.IntOversampling - 1U)); - - /* Store regular and injected triggers and injected scan mode*/ - hdfsdm_filter->RegularTrigger = hdfsdm_filter->Init.RegularParam.Trigger; - hdfsdm_filter->InjectedTrigger = hdfsdm_filter->Init.InjectedParam.Trigger; - hdfsdm_filter->ExtTriggerEdge = hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge; - hdfsdm_filter->InjectedScanMode = hdfsdm_filter->Init.InjectedParam.ScanMode; - - /* Enable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; - - /* Set DFSDM filter to ready state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_READY; - - return HAL_OK; -} - -/** - * @brief De-initializes the DFSDM filter. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Check DFSDM filter handle */ - if(hdfsdm_filter == NULL) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Disable the DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); - - /* Call MSP deinit function */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - if(hdfsdm_filter->MspDeInitCallback == NULL) - { - hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; - } - hdfsdm_filter->MspDeInitCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterMspDeInit(hdfsdm_filter); -#endif - - /* Set DFSDM filter in reset state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_RESET; - - return HAL_OK; -} - -/** - * @brief Initializes the DFSDM filter MSP. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the function is needed, - the HAL_DFSDM_FilterMspInit could be implemented in the user file. - */ -} - -/** - * @brief De-initializes the DFSDM filter MSP. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the function is needed, - the HAL_DFSDM_FilterMspDeInit could be implemented in the user file. - */ -} - -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a user DFSDM filter callback - * to be used instead of the weak predefined callback. - * @param hdfsdm_filter DFSDM filter handle. - * @param CallbackID ID of the callback to be registered. - * This parameter can be one of the following values: - * @arg @ref HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID regular conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID half regular conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID injected conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID half injected conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_ERROR_CB_ID error callback ID. - * @arg @ref HAL_DFSDM_FILTER_MSPINIT_CB_ID MSP init callback ID. - * @arg @ref HAL_DFSDM_FILTER_MSPDEINIT_CB_ID MSP de-init callback ID. - * @param pCallback pointer to the callback function. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID, - pDFSDM_Filter_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(pCallback == NULL) - { - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - else - { - if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) - { - switch (CallbackID) - { - case HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID : - hdfsdm_filter->RegConvCpltCallback = pCallback; - break; - case HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID : - hdfsdm_filter->RegConvHalfCpltCallback = pCallback; - break; - case HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID : - hdfsdm_filter->InjConvCpltCallback = pCallback; - break; - case HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID : - hdfsdm_filter->InjConvHalfCpltCallback = pCallback; - break; - case HAL_DFSDM_FILTER_ERROR_CB_ID : - hdfsdm_filter->ErrorCallback = pCallback; - break; - case HAL_DFSDM_FILTER_MSPINIT_CB_ID : - hdfsdm_filter->MspInitCallback = pCallback; - break; - case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : - hdfsdm_filter->MspDeInitCallback = pCallback; - break; - default : - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if(HAL_DFSDM_FILTER_STATE_RESET == hdfsdm_filter->State) - { - switch (CallbackID) - { - case HAL_DFSDM_FILTER_MSPINIT_CB_ID : - hdfsdm_filter->MspInitCallback = pCallback; - break; - case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : - hdfsdm_filter->MspDeInitCallback = pCallback; - break; - default : - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - } - return status; -} - -/** - * @brief Unregister a user DFSDM filter callback. - * DFSDM filter callback is redirected to the weak predefined callback. - * @param hdfsdm_filter DFSDM filter handle. - * @param CallbackID ID of the callback to be unregistered. - * This parameter can be one of the following values: - * @arg @ref HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID regular conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID half regular conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID injected conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID half injected conversion complete callback ID. - * @arg @ref HAL_DFSDM_FILTER_ERROR_CB_ID error callback ID. - * @arg @ref HAL_DFSDM_FILTER_MSPINIT_CB_ID MSP init callback ID. - * @arg @ref HAL_DFSDM_FILTER_MSPDEINIT_CB_ID MSP de-init callback ID. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) - { - switch (CallbackID) - { - case HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID : - hdfsdm_filter->RegConvCpltCallback = HAL_DFSDM_FilterRegConvCpltCallback; - break; - case HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID : - hdfsdm_filter->RegConvHalfCpltCallback = HAL_DFSDM_FilterRegConvHalfCpltCallback; - break; - case HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID : - hdfsdm_filter->InjConvCpltCallback = HAL_DFSDM_FilterInjConvCpltCallback; - break; - case HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID : - hdfsdm_filter->InjConvHalfCpltCallback = HAL_DFSDM_FilterInjConvHalfCpltCallback; - break; - case HAL_DFSDM_FILTER_ERROR_CB_ID : - hdfsdm_filter->ErrorCallback = HAL_DFSDM_FilterErrorCallback; - break; - case HAL_DFSDM_FILTER_MSPINIT_CB_ID : - hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; - break; - case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : - hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; - break; - default : - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if(HAL_DFSDM_FILTER_STATE_RESET == hdfsdm_filter->State) - { - switch (CallbackID) - { - case HAL_DFSDM_FILTER_MSPINIT_CB_ID : - hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; - break; - case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : - hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; - break; - default : - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - return status; -} - -/** - * @brief Register a user DFSDM filter analog watchdog callback - * to be used instead of the weak predefined callback. - * @param hdfsdm_filter DFSDM filter handle. - * @param pCallback pointer to the DFSDM filter analog watchdog callback function. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - pDFSDM_Filter_AwdCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(pCallback == NULL) - { - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - else - { - if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) - { - hdfsdm_filter->AwdCallback = pCallback; - } - else - { - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - } - return status; -} - -/** - * @brief Unregister a user DFSDM filter analog watchdog callback. - * DFSDM filter AWD callback is redirected to the weak predefined callback. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) - { - hdfsdm_filter->AwdCallback = HAL_DFSDM_FilterAwdCallback; - } - else - { - /* update the error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - return status; -} -#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group2_Filter Filter control functions - * @brief Filter control functions - * -@verbatim - ============================================================================== - ##### Filter control functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Select channel and enable/disable continuous mode for regular conversion. - (+) Select channels for injected conversion. -@endverbatim - * @{ - */ - -/** - * @brief This function allows to select channel and to enable/disable - * continuous mode for regular conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Channel for regular conversion. - * This parameter can be a value of @ref DFSDM_Channel_Selection. - * @param ContinuousMode Enable/disable continuous mode for regular conversion. - * This parameter can be a value of @ref DFSDM_ContinuousMode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel, - uint32_t ContinuousMode) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(IS_DFSDM_REGULAR_CHANNEL(Channel)); - assert_param(IS_DFSDM_CONTINUOUS_MODE(ContinuousMode)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR)) - { - /* Configure channel and continuous mode for regular conversion */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RCH | DFSDM_FLTCR1_RCONT); - if(ContinuousMode == DFSDM_CONTINUOUS_CONV_ON) - { - hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) (((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET) | - DFSDM_FLTCR1_RCONT); - } - else - { - hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) ((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET); - } - /* Store continuous mode information */ - hdfsdm_filter->RegularContMode = ContinuousMode; - } - else - { - status = HAL_ERROR; - } - - /* Return function status */ - return status; -} - -/** - * @brief This function allows to select channels for injected conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Channels for injected conversion. - * This parameter can be a values combination of @ref DFSDM_Channel_Selection. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR)) - { - /* Configure channel for injected conversion */ - hdfsdm_filter->Instance->FLTJCHGR = (uint32_t) (Channel & DFSDM_LSB_MASK); - /* Store number of injected channels */ - hdfsdm_filter->InjectedChannelsNbr = DFSDM_GetInjChannelsNbr(Channel); - /* Update number of injected channels remaining */ - hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ - hdfsdm_filter->InjectedChannelsNbr : 1U; - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions - * @brief Filter operation functions - * -@verbatim - ============================================================================== - ##### Filter operation functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Start conversion of regular/injected channel. - (+) Poll for the end of regular/injected conversion. - (+) Stop conversion of regular/injected channel. - (+) Start conversion of regular/injected channel and enable interrupt. - (+) Call the callback functions at the end of regular/injected conversions. - (+) Stop conversion of regular/injected channel and disable interrupt. - (+) Start conversion of regular/injected channel and enable DMA transfer. - (+) Stop conversion of regular/injected channel and disable DMA transfer. - (+) Start analog watchdog and enable interrupt. - (+) Call the callback function when analog watchdog occurs. - (+) Stop analog watchdog and disable interrupt. - (+) Start extreme detector. - (+) Stop extreme detector. - (+) Get result of regular channel conversion. - (+) Get result of injected channel conversion. - (+) Get extreme detector maximum and minimum values. - (+) Get conversion time. - (+) Handle DFSDM interrupt request. -@endverbatim - * @{ - */ - -/** - * @brief This function allows to start regular conversion in polling mode. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if injected conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) - { - /* Start regular conversion */ - DFSDM_RegConvStart(hdfsdm_filter); - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to poll for the end of regular conversion. - * @note This function should be called only if regular conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @param Timeout Timeout value in milliseconds. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - return HAL_ERROR; - } - else - { - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait end of regular conversion */ - while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != DFSDM_FLTISR_REOCF) - { - /* Check the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) - { - /* Return timeout status */ - return HAL_TIMEOUT; - } - } - } - /* Check if overrun occurs */ - if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) == DFSDM_FLTISR_ROVRF) - { - /* Update error code and call error callback */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN; -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->ErrorCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); -#endif - - /* Clear regular overrun flag */ - hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF; - } - /* Update DFSDM filter state only if not continuous conversion and SW trigger */ - if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ - (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) - { - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ - HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; - } - /* Return function status */ - return HAL_OK; - } -} - -/** - * @brief This function allows to stop regular conversion in polling mode. - * @note This function should be called only if regular conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Stop regular conversion */ - DFSDM_RegConvStop(hdfsdm_filter); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start regular conversion in interrupt mode. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if injected conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) - { - /* Enable interrupts for regular conversions */ - hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE); - - /* Start regular conversion */ - DFSDM_RegConvStart(hdfsdm_filter); - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to stop regular conversion in interrupt mode. - * @note This function should be called only if regular conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Disable interrupts for regular conversions */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE); - - /* Stop regular conversion */ - DFSDM_RegConvStop(hdfsdm_filter); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start regular conversion in DMA mode. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if injected conversion is ongoing. - * Please note that data on buffer will contain signed regular conversion - * value on 24 most significant bits and corresponding channel on 3 least - * significant bits. - * @param hdfsdm_filter DFSDM filter handle. - * @param pData The destination buffer address. - * @param Length The length of data to be transferred from DFSDM filter to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - int32_t *pData, - uint32_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check destination address and length */ - if((pData == NULL) || (Length == 0U)) - { - status = HAL_ERROR; - } - /* Check that DMA is enabled for regular conversion */ - else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN) - { - status = HAL_ERROR; - } - /* Check parameters compatibility */ - else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ - (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \ - (Length != 1U)) - { - status = HAL_ERROR; - } - else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ - (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR)) - { - status = HAL_ERROR; - } - /* Check DFSDM filter state */ - else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) - { - /* Set callbacks on DMA handler */ - hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt; - hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError; - hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\ - DFSDM_DMARegularHalfConvCplt : NULL; - - /* Start DMA in interrupt mode */ - if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)&hdfsdm_filter->Instance->FLTRDATAR, \ - (uint32_t) pData, Length) != HAL_OK) - { - /* Set DFSDM filter in error state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; - status = HAL_ERROR; - } - else - { - /* Start regular conversion */ - DFSDM_RegConvStart(hdfsdm_filter); - } - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start regular conversion in DMA mode and to get - * only the 16 most significant bits of conversion. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if injected conversion is ongoing. - * Please note that data on buffer will contain signed 16 most significant - * bits of regular conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @param pData The destination buffer address. - * @param Length The length of data to be transferred from DFSDM filter to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - int16_t *pData, - uint32_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check destination address and length */ - if((pData == NULL) || (Length == 0U)) - { - status = HAL_ERROR; - } - /* Check that DMA is enabled for regular conversion */ - else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN) - { - status = HAL_ERROR; - } - /* Check parameters compatibility */ - else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ - (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \ - (Length != 1U)) - { - status = HAL_ERROR; - } - else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ - (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR)) - { - status = HAL_ERROR; - } - /* Check DFSDM filter state */ - else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) - { - /* Set callbacks on DMA handler */ - hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt; - hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError; - hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\ - DFSDM_DMARegularHalfConvCplt : NULL; - - /* Start DMA in interrupt mode */ - if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)(&hdfsdm_filter->Instance->FLTRDATAR) + 2U, \ - (uint32_t) pData, Length) != HAL_OK) - { - /* Set DFSDM filter in error state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; - status = HAL_ERROR; - } - else - { - /* Start regular conversion */ - DFSDM_RegConvStart(hdfsdm_filter); - } - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to stop regular conversion in DMA mode. - * @note This function should be called only if regular conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Stop current DMA transfer */ - if(HAL_DMA_Abort(hdfsdm_filter->hdmaReg) != HAL_OK) - { - /* Set DFSDM filter in error state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; - status = HAL_ERROR; - } - else - { - /* Stop regular conversion */ - DFSDM_RegConvStop(hdfsdm_filter); - } - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to get regular conversion value. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Corresponding channel of regular conversion. - * @retval Regular conversion value - */ -int32_t HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t *Channel) -{ - uint32_t reg = 0U; - int32_t value = 0; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(Channel != NULL); - - /* Get value of data register for regular channel */ - reg = hdfsdm_filter->Instance->FLTRDATAR; - - /* Extract channel and regular conversion value */ - *Channel = (reg & DFSDM_FLTRDATAR_RDATACH); - value = ((int32_t)(reg & DFSDM_FLTRDATAR_RDATA) >> DFSDM_FLTRDATAR_RDATA_Pos); - - /* return regular conversion value */ - return value; -} - -/** - * @brief This function allows to start injected conversion in polling mode. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if regular conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) - { - /* Start injected conversion */ - DFSDM_InjConvStart(hdfsdm_filter); - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to poll for the end of injected conversion. - * @note This function should be called only if injected conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @param Timeout Timeout value in milliseconds. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - return HAL_ERROR; - } - else - { - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait end of injected conversions */ - while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != DFSDM_FLTISR_JEOCF) - { - /* Check the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if( ((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) - { - /* Return timeout status */ - return HAL_TIMEOUT; - } - } - } - /* Check if overrun occurs */ - if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) == DFSDM_FLTISR_JOVRF) - { - /* Update error code and call error callback */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN; -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->ErrorCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); -#endif - - /* Clear injected overrun flag */ - hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF; - } - - /* Update remaining injected conversions */ - hdfsdm_filter->InjConvRemaining--; - if(hdfsdm_filter->InjConvRemaining == 0U) - { - /* Update DFSDM filter state only if trigger is software */ - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) - { - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ - HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; - } - - /* end of injected sequence, reset the value */ - hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ - hdfsdm_filter->InjectedChannelsNbr : 1U; - } - - /* Return function status */ - return HAL_OK; - } -} - -/** - * @brief This function allows to stop injected conversion in polling mode. - * @note This function should be called only if injected conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Stop injected conversion */ - DFSDM_InjConvStop(hdfsdm_filter); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start injected conversion in interrupt mode. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if regular conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) - { - /* Enable interrupts for injected conversions */ - hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE); - - /* Start injected conversion */ - DFSDM_InjConvStart(hdfsdm_filter); - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to stop injected conversion in interrupt mode. - * @note This function should be called only if injected conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Disable interrupts for injected conversions */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE); - - /* Stop injected conversion */ - DFSDM_InjConvStop(hdfsdm_filter); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start injected conversion in DMA mode. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if regular conversion is ongoing. - * Please note that data on buffer will contain signed injected conversion - * value on 24 most significant bits and corresponding channel on 3 least - * significant bits. - * @param hdfsdm_filter DFSDM filter handle. - * @param pData The destination buffer address. - * @param Length The length of data to be transferred from DFSDM filter to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - int32_t *pData, - uint32_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check destination address and length */ - if((pData == NULL) || (Length == 0U)) - { - status = HAL_ERROR; - } - /* Check that DMA is enabled for injected conversion */ - else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN) - { - status = HAL_ERROR; - } - /* Check parameters compatibility */ - else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \ - (Length > hdfsdm_filter->InjConvRemaining)) - { - status = HAL_ERROR; - } - else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR)) - { - status = HAL_ERROR; - } - /* Check DFSDM filter state */ - else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) - { - /* Set callbacks on DMA handler */ - hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt; - hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError; - hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\ - DFSDM_DMAInjectedHalfConvCplt : NULL; - - /* Start DMA in interrupt mode */ - if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)&hdfsdm_filter->Instance->FLTJDATAR, \ - (uint32_t) pData, Length) != HAL_OK) - { - /* Set DFSDM filter in error state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; - status = HAL_ERROR; - } - else - { - /* Start injected conversion */ - DFSDM_InjConvStart(hdfsdm_filter); - } - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start injected conversion in DMA mode and to get - * only the 16 most significant bits of conversion. - * @note This function should be called only when DFSDM filter instance is - * in idle state or if regular conversion is ongoing. - * Please note that data on buffer will contain signed 16 most significant - * bits of injected conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @param pData The destination buffer address. - * @param Length The length of data to be transferred from DFSDM filter to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - int16_t *pData, - uint32_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check destination address and length */ - if((pData == NULL) || (Length == 0U)) - { - status = HAL_ERROR; - } - /* Check that DMA is enabled for injected conversion */ - else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN) - { - status = HAL_ERROR; - } - /* Check parameters compatibility */ - else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \ - (Length > hdfsdm_filter->InjConvRemaining)) - { - status = HAL_ERROR; - } - else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ - (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR)) - { - status = HAL_ERROR; - } - /* Check DFSDM filter state */ - else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) - { - /* Set callbacks on DMA handler */ - hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt; - hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError; - hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\ - DFSDM_DMAInjectedHalfConvCplt : NULL; - - /* Start DMA in interrupt mode */ - if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)(&hdfsdm_filter->Instance->FLTJDATAR) + 2U, \ - (uint32_t) pData, Length) != HAL_OK) - { - /* Set DFSDM filter in error state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; - status = HAL_ERROR; - } - else - { - /* Start injected conversion */ - DFSDM_InjConvStart(hdfsdm_filter); - } - } - else - { - status = HAL_ERROR; - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to stop injected conversion in DMA mode. - * @note This function should be called only if injected conversion is ongoing. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ - (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Stop current DMA transfer */ - if(HAL_DMA_Abort(hdfsdm_filter->hdmaInj) != HAL_OK) - { - /* Set DFSDM filter in error state */ - hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; - status = HAL_ERROR; - } - else - { - /* Stop regular conversion */ - DFSDM_InjConvStop(hdfsdm_filter); - } - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to get injected conversion value. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Corresponding channel of injected conversion. - * @retval Injected conversion value - */ -int32_t HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t *Channel) -{ - uint32_t reg = 0U; - int32_t value = 0; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(Channel != NULL); - - /* Get value of data register for injected channel */ - reg = hdfsdm_filter->Instance->FLTJDATAR; - - /* Extract channel and injected conversion value */ - *Channel = (reg & DFSDM_FLTJDATAR_JDATACH); - value = ((int32_t)(reg & DFSDM_FLTJDATAR_JDATA) >> DFSDM_FLTJDATAR_JDATA_Pos); - - /* return regular conversion value */ - return value; -} - -/** - * @brief This function allows to start filter analog watchdog in interrupt mode. - * @param hdfsdm_filter DFSDM filter handle. - * @param awdParam DFSDM filter analog watchdog parameters. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - DFSDM_Filter_AwdParamTypeDef *awdParam) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(IS_DFSDM_FILTER_AWD_DATA_SOURCE(awdParam->DataSource)); - assert_param(IS_DFSDM_INJECTED_CHANNEL(awdParam->Channel)); - assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->HighThreshold)); - assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->LowThreshold)); - assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->HighBreakSignal)); - assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->LowBreakSignal)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Set analog watchdog data source */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL); - hdfsdm_filter->Instance->FLTCR1 |= awdParam->DataSource; - - /* Set thresholds and break signals */ - hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH); - hdfsdm_filter->Instance->FLTAWHTR |= (((uint32_t) awdParam->HighThreshold << DFSDM_FLTAWHTR_AWHT_Pos) | \ - awdParam->HighBreakSignal); - hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL); - hdfsdm_filter->Instance->FLTAWLTR |= (((uint32_t) awdParam->LowThreshold << DFSDM_FLTAWLTR_AWLT_Pos) | \ - awdParam->LowBreakSignal); - - /* Set channels and interrupt for analog watchdog */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH); - hdfsdm_filter->Instance->FLTCR2 |= (((awdParam->Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_AWDCH_Pos) | \ - DFSDM_FLTCR2_AWDIE); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to stop filter analog watchdog in interrupt mode. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Reset channels for analog watchdog and deactivate interrupt */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH | DFSDM_FLTCR2_AWDIE); - - /* Clear all analog watchdog flags */ - hdfsdm_filter->Instance->FLTAWCFR = (DFSDM_FLTAWCFR_CLRAWHTF | DFSDM_FLTAWCFR_CLRAWLTF); - - /* Reset thresholds and break signals */ - hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH); - hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL); - - /* Reset analog watchdog data source */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to start extreme detector feature. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Channels where extreme detector is enabled. - * This parameter can be a values combination of @ref DFSDM_Channel_Selection. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Set channels for extreme detector */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH); - hdfsdm_filter->Instance->FLTCR2 |= ((Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_EXCH_Pos); - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to stop extreme detector feature. - * @param hdfsdm_filter DFSDM filter handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - HAL_StatusTypeDef status = HAL_OK; - __IO uint32_t reg1; - __IO uint32_t reg2; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Check DFSDM filter state */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ - (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) - { - /* Return error status */ - status = HAL_ERROR; - } - else - { - /* Reset channels for extreme detector */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH); - - /* Clear extreme detector values */ - reg1 = hdfsdm_filter->Instance->FLTEXMAX; - reg2 = hdfsdm_filter->Instance->FLTEXMIN; - UNUSED(reg1); /* To avoid GCC warning */ - UNUSED(reg2); /* To avoid GCC warning */ - } - /* Return function status */ - return status; -} - -/** - * @brief This function allows to get extreme detector maximum value. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Corresponding channel. - * @retval Extreme detector maximum value - * This value is between Min_Data = -8388608 and Max_Data = 8388607. - */ -int32_t HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t *Channel) -{ - uint32_t reg = 0U; - int32_t value = 0; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(Channel != NULL); - - /* Get value of extreme detector maximum register */ - reg = hdfsdm_filter->Instance->FLTEXMAX; - - /* Extract channel and extreme detector maximum value */ - *Channel = (reg & DFSDM_FLTEXMAX_EXMAXCH); - value = ((int32_t)(reg & DFSDM_FLTEXMAX_EXMAX) >> DFSDM_FLTEXMAX_EXMAX_Pos); - - /* return extreme detector maximum value */ - return value; -} - -/** - * @brief This function allows to get extreme detector minimum value. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Corresponding channel. - * @retval Extreme detector minimum value - * This value is between Min_Data = -8388608 and Max_Data = 8388607. - */ -int32_t HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t *Channel) -{ - uint32_t reg = 0U; - int32_t value = 0; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - assert_param(Channel != NULL); - - /* Get value of extreme detector minimum register */ - reg = hdfsdm_filter->Instance->FLTEXMIN; - - /* Extract channel and extreme detector minimum value */ - *Channel = (reg & DFSDM_FLTEXMIN_EXMINCH); - value = ((int32_t)(reg & DFSDM_FLTEXMIN_EXMIN) >> DFSDM_FLTEXMIN_EXMIN_Pos); - - /* return extreme detector minimum value */ - return value; -} - -/** - * @brief This function allows to get conversion time value. - * @param hdfsdm_filter DFSDM filter handle. - * @retval Conversion time value - * @note To get time in second, this value has to be divided by DFSDM clock frequency. - */ -uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - uint32_t reg = 0U; - uint32_t value = 0U; - - /* Check parameters */ - assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); - - /* Get value of conversion timer register */ - reg = hdfsdm_filter->Instance->FLTCNVTIMR; - - /* Extract conversion time value */ - value = ((reg & DFSDM_FLTCNVTIMR_CNVCNT) >> DFSDM_FLTCNVTIMR_CNVCNT_Pos); - - /* return extreme detector minimum value */ - return value; -} - -/** - * @brief This function handles the DFSDM interrupts. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Check if overrun occurs during regular conversion */ - if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_ROVRIE) != 0U)) - { - /* Clear regular overrun flag */ - hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF; - - /* Update error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN; - - /* Call error callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->ErrorCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); -#endif - } - /* Check if overrun occurs during injected conversion */ - else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_JOVRIE) != 0U)) - { - /* Clear injected overrun flag */ - hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF; - - /* Update error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN; - - /* Call error callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->ErrorCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); -#endif - } - /* Check if end of regular conversion */ - else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_REOCIE) != 0U)) - { - /* Call regular conversion complete callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->RegConvCpltCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter); -#endif - - /* End of conversion if mode is not continuous and software trigger */ - if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ - (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) - { - /* Disable interrupts for regular conversions */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE); - - /* Update DFSDM filter state */ - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ - HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; - } - } - /* Check if end of injected conversion */ - else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_JEOCIE) != 0U)) - { - /* Call injected conversion complete callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->InjConvCpltCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter); -#endif - - /* Update remaining injected conversions */ - hdfsdm_filter->InjConvRemaining--; - if(hdfsdm_filter->InjConvRemaining == 0U) - { - /* End of conversion if trigger is software */ - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) - { - /* Disable interrupts for injected conversions */ - hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE); - - /* Update DFSDM filter state */ - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ - HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; - } - /* end of injected sequence, reset the value */ - hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ - hdfsdm_filter->InjectedChannelsNbr : 1U; - } - } - /* Check if analog watchdog occurs */ - else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_AWDF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_AWDIE) != 0U)) - { - uint32_t reg = 0U; - uint32_t threshold = 0U; - uint32_t channel = 0U; - - /* Get channel and threshold */ - reg = hdfsdm_filter->Instance->FLTAWSR; - threshold = ((reg & DFSDM_FLTAWSR_AWLTF) != 0U) ? DFSDM_AWD_LOW_THRESHOLD : DFSDM_AWD_HIGH_THRESHOLD; - if(threshold == DFSDM_AWD_HIGH_THRESHOLD) - { - reg = reg >> DFSDM_FLTAWSR_AWHTF_Pos; - } - while((reg & 1U) == 0U) - { - channel++; - reg = reg >> 1U; - } - /* Clear analog watchdog flag */ - hdfsdm_filter->Instance->FLTAWCFR = (threshold == DFSDM_AWD_HIGH_THRESHOLD) ? \ - (1U << (DFSDM_FLTAWSR_AWHTF_Pos + channel)) : \ - (1U << channel); - - /* Call analog watchdog callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->AwdCallback(hdfsdm_filter, channel, threshold); -#else - HAL_DFSDM_FilterAwdCallback(hdfsdm_filter, channel, threshold); -#endif - } - /* Check if clock absence occurs */ - else if((hdfsdm_filter->Instance == DFSDM1_Filter0) && \ - ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_CKABIE) != 0U)) - { - uint32_t reg = 0U; - uint32_t channel = 0U; - - reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_Pos); - - while(channel < DFSDM1_CHANNEL_NUMBER) - { - /* Check if flag is set and corresponding channel is enabled */ - if(((reg & 1U) != 0U) && (a_dfsdm1ChannelHandle[channel] != NULL)) - { - /* Check clock absence has been enabled for this channel */ - if((a_dfsdm1ChannelHandle[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U) - { - /* Clear clock absence flag */ - hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Call clock absence callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - a_dfsdm1ChannelHandle[channel]->CkabCallback(a_dfsdm1ChannelHandle[channel]); -#else - HAL_DFSDM_ChannelCkabCallback(a_dfsdm1ChannelHandle[channel]); -#endif - } - } - channel++; - reg = reg >> 1U; - } - } -#if defined (DFSDM2_Channel0) - /* Check if clock absence occurs */ - else if((hdfsdm_filter->Instance == DFSDM2_Filter0) && \ - ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_CKABIE) != 0U)) - { - uint32_t reg = 0U; - uint32_t channel = 0U; - - reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_Pos); - - while(channel < DFSDM2_CHANNEL_NUMBER) - { - /* Check if flag is set and corresponding channel is enabled */ - if(((reg & 1U) != 0U) && (a_dfsdm2ChannelHandle[channel] != NULL)) - { - /* Check clock absence has been enabled for this channel */ - if((a_dfsdm2ChannelHandle[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U) - { - /* Clear clock absence flag */ - hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); - - /* Call clock absence callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - a_dfsdm2ChannelHandle[channel]->CkabCallback(a_dfsdm2ChannelHandle[channel]); -#else - HAL_DFSDM_ChannelCkabCallback(a_dfsdm2ChannelHandle[channel]); -#endif - } - } - channel++; - reg = reg >> 1U; - } - } -#endif /* DFSDM2_Channel0 */ - /* Check if short circuit detection occurs */ - else if((hdfsdm_filter->Instance == DFSDM1_Filter0) && \ - ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_SCDIE) != 0U)) - { - uint32_t reg = 0U; - uint32_t channel = 0U; - - /* Get channel */ - reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_Pos); - while((reg & 1U) == 0U) - { - channel++; - reg = reg >> 1U; - } - - /* Clear short circuit detection flag */ - hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); - - /* Call short circuit detection callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - a_dfsdm1ChannelHandle[channel]->ScdCallback(a_dfsdm1ChannelHandle[channel]); -#else - HAL_DFSDM_ChannelScdCallback(a_dfsdm1ChannelHandle[channel]); -#endif - } -#if defined (DFSDM2_Channel0) - /* Check if short circuit detection occurs */ - else if((hdfsdm_filter->Instance == DFSDM2_Filter0) && \ - ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) != 0U) && \ - ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_SCDIE) != 0U)) - { - uint32_t reg = 0U; - uint32_t channel = 0U; - - /* Get channel */ - reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_Pos); - while((reg & 1U) == 0U) - { - channel++; - reg = reg >> 1U; - } - - /* Clear short circuit detection flag */ - hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); - - /* Call short circuit detection callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - a_dfsdm2ChannelHandle[channel]->ScdCallback(a_dfsdm2ChannelHandle[channel]); -#else - HAL_DFSDM_ChannelScdCallback(a_dfsdm2ChannelHandle[channel]); -#endif - } -#endif /* DFSDM2_Channel0 */ -} - -/** - * @brief Regular conversion complete callback. - * @note In interrupt mode, user has to read conversion value in this function - * using HAL_DFSDM_FilterGetRegularValue. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_FilterRegConvCpltCallback could be implemented in the user file. - */ -} - -/** - * @brief Half regular conversion complete callback. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_FilterRegConvHalfCpltCallback could be implemented in the user file. - */ -} - -/** - * @brief Injected conversion complete callback. - * @note In interrupt mode, user has to read conversion value in this function - * using HAL_DFSDM_FilterGetInjectedValue. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_FilterInjConvCpltCallback could be implemented in the user file. - */ -} - -/** - * @brief Half injected conversion complete callback. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_FilterInjConvHalfCpltCallback could be implemented in the user file. - */ -} - -/** - * @brief Filter analog watchdog callback. - * @param hdfsdm_filter DFSDM filter handle. - * @param Channel Corresponding channel. - * @param Threshold Low or high threshold has been reached. - * @retval None - */ -__weak void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, - uint32_t Channel, uint32_t Threshold) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - UNUSED(Channel); - UNUSED(Threshold); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_FilterAwdCallback could be implemented in the user file. - */ -} - -/** - * @brief Error callback. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -__weak void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdfsdm_filter); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DFSDM_FilterErrorCallback could be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions - * @brief Filter state functions - * -@verbatim - ============================================================================== - ##### Filter state functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Get the DFSDM filter state. - (+) Get the DFSDM filter error. -@endverbatim - * @{ - */ - -/** - * @brief This function allows to get the current DFSDM filter handle state. - * @param hdfsdm_filter DFSDM filter handle. - * @retval DFSDM filter state. - */ -HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - /* Return DFSDM filter handle state */ - return hdfsdm_filter->State; -} - -/** - * @brief This function allows to get the current DFSDM filter error. - * @param hdfsdm_filter DFSDM filter handle. - * @retval DFSDM filter error code. - */ -uint32_t HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) -{ - return hdfsdm_filter->ErrorCode; -} - -/** - * @} - */ - -/** @defgroup DFSDM_Exported_Functions_Group5_Filter MultiChannel operation functions - * @brief Filter state functions - * -@verbatim - ============================================================================== - ##### Filter MultiChannel operation functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Control the DFSDM Multi channel delay block -@endverbatim - * @{ - */ -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** - * @brief Select the DFSDM2 as clock source for the bitstream clock. - * @note The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called - * before HAL_DFSDM_BitstreamClock_Start() - */ -void HAL_DFSDM_BitstreamClock_Start(void) -{ - uint32_t tmp = 0; - - tmp = SYSCFG->MCHDLYCR; - tmp = (tmp &(~SYSCFG_MCHDLYCR_BSCKSEL)); - - SYSCFG->MCHDLYCR = (tmp|SYSCFG_MCHDLYCR_BSCKSEL); -} - -/** - * @brief Stop the DFSDM2 as clock source for the bitstream clock. - * @note The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called - * before HAL_DFSDM_BitstreamClock_Stop() - * @retval None - */ -void HAL_DFSDM_BitstreamClock_Stop(void) -{ - uint32_t tmp = 0U; - - tmp = SYSCFG->MCHDLYCR; - tmp = (tmp &(~SYSCFG_MCHDLYCR_BSCKSEL)); - - SYSCFG->MCHDLYCR = tmp; -} - -/** - * @brief Disable Delay Clock for DFSDM1/2. - * @param MCHDLY HAL_MCHDLY_CLOCK_DFSDM2. - * HAL_MCHDLY_CLOCK_DFSDM1. - * @note The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called - * before HAL_DFSDM_DisableDelayClock() - * @retval None - */ -void HAL_DFSDM_DisableDelayClock(uint32_t MCHDLY) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_DELAY_CLOCK(MCHDLY)); - - tmp = SYSCFG->MCHDLYCR; - if(MCHDLY == HAL_MCHDLY_CLOCK_DFSDM2) - { - tmp = tmp &(~SYSCFG_MCHDLYCR_MCHDLY2EN); - } - else - { - tmp = tmp &(~SYSCFG_MCHDLYCR_MCHDLY1EN); - } - - SYSCFG->MCHDLYCR = tmp; -} - -/** - * @brief Enable Delay Clock for DFSDM1/2. - * @param MCHDLY HAL_MCHDLY_CLOCK_DFSDM2. - * HAL_MCHDLY_CLOCK_DFSDM1. - * @note The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called - * before HAL_DFSDM_EnableDelayClock() - * @retval None - */ -void HAL_DFSDM_EnableDelayClock(uint32_t MCHDLY) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_DELAY_CLOCK(MCHDLY)); - - tmp = SYSCFG->MCHDLYCR; - tmp = tmp & ~MCHDLY; - - SYSCFG->MCHDLYCR = (tmp|MCHDLY); -} - -/** - * @brief Select the source for CKin signals for DFSDM1/2. - * @param source DFSDM2_CKIN_PAD. - * DFSDM2_CKIN_DM. - * DFSDM1_CKIN_PAD. - * DFSDM1_CKIN_DM. - * @retval None - */ -void HAL_DFSDM_ClockIn_SourceSelection(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_CLOCKIN_SELECTION(source)); - - tmp = SYSCFG->MCHDLYCR; - - if((source == HAL_DFSDM2_CKIN_PAD) || (source == HAL_DFSDM2_CKIN_DM)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CFG); - - if(source == HAL_DFSDM2_CKIN_PAD) - { - source = 0x000000U; - } - } - else - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CFG); - } - - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Select the source for CKOut signals for DFSDM1/2. - * @param source: DFSDM2_CKOUT_DFSDM2. - * DFSDM2_CKOUT_M27. - * DFSDM1_CKOUT_DFSDM1. - * DFSDM1_CKOUT_M27. - * @retval None - */ -void HAL_DFSDM_ClockOut_SourceSelection(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_CLOCKOUT_SELECTION(source)); - - tmp = SYSCFG->MCHDLYCR; - - if((source == HAL_DFSDM2_CKOUT_DFSDM2) || (source == HAL_DFSDM2_CKOUT_M27)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CKOSEL); - - if(source == HAL_DFSDM2_CKOUT_DFSDM2) - { - source = 0x000U; - } - } - else - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CKOSEL); - } - - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Select the source for DataIn0 signals for DFSDM1/2. - * @param source DATAIN0_DFSDM2_PAD. - * DATAIN0_DFSDM2_DATAIN1. - * DATAIN0_DFSDM1_PAD. - * DATAIN0_DFSDM1_DATAIN1. - * @retval None - */ -void HAL_DFSDM_DataIn0_SourceSelection(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_DATAIN0_SRC_SELECTION(source)); - - tmp = SYSCFG->MCHDLYCR; - - if((source == HAL_DATAIN0_DFSDM2_PAD)|| (source == HAL_DATAIN0_DFSDM2_DATAIN1)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D0SEL); - if(source == HAL_DATAIN0_DFSDM2_PAD) - { - source = 0x00000U; - } - } - else - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM1D0SEL); - } - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Select the source for DataIn2 signals for DFSDM1/2. - * @param source DATAIN2_DFSDM2_PAD. - * DATAIN2_DFSDM2_DATAIN3. - * DATAIN2_DFSDM1_PAD. - * DATAIN2_DFSDM1_DATAIN3. - * @retval None - */ -void HAL_DFSDM_DataIn2_SourceSelection(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_DATAIN2_SRC_SELECTION(source)); - - tmp = SYSCFG->MCHDLYCR; - - if((source == HAL_DATAIN2_DFSDM2_PAD)|| (source == HAL_DATAIN2_DFSDM2_DATAIN3)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D2SEL); - if (source == HAL_DATAIN2_DFSDM2_PAD) - { - source = 0x0000U; - } - } - else - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM1D2SEL); - } - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Select the source for DataIn4 signals for DFSDM2. - * @param source DATAIN4_DFSDM2_PAD. - * DATAIN4_DFSDM2_DATAIN5 - * @retval None - */ -void HAL_DFSDM_DataIn4_SourceSelection(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_DATAIN4_SRC_SELECTION(source)); - - tmp = SYSCFG->MCHDLYCR; - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D4SEL); - - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Select the source for DataIn6 signals for DFSDM2. - * @param source DATAIN6_DFSDM2_PAD. - * DATAIN6_DFSDM2_DATAIN7. - * @retval None - */ -void HAL_DFSDM_DataIn6_SourceSelection(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_DATAIN6_SRC_SELECTION(source)); - - tmp = SYSCFG->MCHDLYCR; - - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D6SEL); - - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Configure the distribution of the bitstream clock gated from TIM4_OC - * for DFSDM1 or TIM3_OC for DFSDM2 - * @param source DFSDM1_CLKIN0_TIM4OC2 - * DFSDM1_CLKIN2_TIM4OC2 - * DFSDM1_CLKIN1_TIM4OC1 - * DFSDM1_CLKIN3_TIM4OC1 - * DFSDM2_CLKIN0_TIM3OC4 - * DFSDM2_CLKIN4_TIM3OC4 - * DFSDM2_CLKIN1_TIM3OC3 - * DFSDM2_CLKIN5_TIM3OC3 - * DFSDM2_CLKIN2_TIM3OC2 - * DFSDM2_CLKIN6_TIM3OC2 - * DFSDM2_CLKIN3_TIM3OC1 - * DFSDM2_CLKIN7_TIM3OC1 - * @retval None - */ -void HAL_DFSDM_BitStreamClkDistribution_Config(uint32_t source) -{ - uint32_t tmp = 0U; - - assert_param(IS_DFSDM_BITSTREM_CLK_DISTRIBUTION(source)); - - tmp = SYSCFG->MCHDLYCR; - - if ((source == HAL_DFSDM1_CLKIN0_TIM4OC2) || (source == HAL_DFSDM1_CLKIN2_TIM4OC2)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CK02SEL); - } - else if ((source == HAL_DFSDM1_CLKIN1_TIM4OC1) || (source == HAL_DFSDM1_CLKIN3_TIM4OC1)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CK13SEL); - } - else if ((source == HAL_DFSDM2_CLKIN0_TIM3OC4) || (source == HAL_DFSDM2_CLKIN4_TIM3OC4)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK04SEL); - } - else if ((source == HAL_DFSDM2_CLKIN1_TIM3OC3) || (source == HAL_DFSDM2_CLKIN5_TIM3OC3)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK15SEL); - - }else if ((source == HAL_DFSDM2_CLKIN2_TIM3OC2) || (source == HAL_DFSDM2_CLKIN6_TIM3OC2)) - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK26SEL); - } - else - { - tmp = (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK37SEL); - } - - if((source == HAL_DFSDM1_CLKIN0_TIM4OC2) ||(source == HAL_DFSDM1_CLKIN1_TIM4OC1)|| - (source == HAL_DFSDM2_CLKIN0_TIM3OC4) ||(source == HAL_DFSDM2_CLKIN1_TIM3OC3)|| - (source == HAL_DFSDM2_CLKIN2_TIM3OC2) ||(source == HAL_DFSDM2_CLKIN3_TIM3OC1)) - { - source = 0x0000U; - } - - SYSCFG->MCHDLYCR = (source|tmp); -} - -/** - * @brief Configure multi channel delay block: Use DFSDM2 audio clock source as input - * clock for DFSDM1 and DFSDM2 filters to Synchronize DFSDMx filters. - * Set the path of the DFSDM2 clock output (dfsdm2_ckout) to the - * DFSDM1/2 CkInx and data inputs channels by configuring following MCHDLY muxes - * or demuxes: M1, M2, M3, M4, M5, M6, M7, M8, DM1, DM2, DM3, DM4, DM5, DM6, - * M9, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20 based on the - * contains of the DFSDM_MultiChannelConfigTypeDef structure - * @param mchdlystruct Structure of multi channel configuration - * @retval None - * @note The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called - * before HAL_DFSDM_ConfigMultiChannelDelay() - * @note The HAL_DFSDM_ConfigMultiChannelDelay() function clears the SYSCFG-MCHDLYCR - * register before setting the new configuration. - */ -void HAL_DFSDM_ConfigMultiChannelDelay(DFSDM_MultiChannelConfigTypeDef* mchdlystruct) -{ - uint32_t mchdlyreg = 0U; - - assert_param(IS_DFSDM_DFSDM1_CLKOUT(mchdlystruct->DFSDM1ClockOut)); - assert_param(IS_DFSDM_DFSDM2_CLKOUT(mchdlystruct->DFSDM2ClockOut)); - assert_param(IS_DFSDM_DFSDM1_CLKIN(mchdlystruct->DFSDM1ClockIn)); - assert_param(IS_DFSDM_DFSDM2_CLKIN(mchdlystruct->DFSDM2ClockIn)); - assert_param(IS_DFSDM_DFSDM1_BIT_CLK((mchdlystruct->DFSDM1BitClkDistribution))); - assert_param(IS_DFSDM_DFSDM2_BIT_CLK(mchdlystruct->DFSDM2BitClkDistribution)); - assert_param(IS_DFSDM_DFSDM1_DATA_DISTRIBUTION(mchdlystruct->DFSDM1DataDistribution)); - assert_param(IS_DFSDM_DFSDM2_DATA_DISTRIBUTION(mchdlystruct->DFSDM2DataDistribution)); - - mchdlyreg = (SYSCFG->MCHDLYCR & 0x80103U); - - SYSCFG->MCHDLYCR = (mchdlyreg |(mchdlystruct->DFSDM1ClockOut)|(mchdlystruct->DFSDM2ClockOut)| - (mchdlystruct->DFSDM1ClockIn)|(mchdlystruct->DFSDM2ClockIn)| - (mchdlystruct->DFSDM1BitClkDistribution)| (mchdlystruct->DFSDM2BitClkDistribution)| - (mchdlystruct->DFSDM1DataDistribution)| (mchdlystruct->DFSDM2DataDistribution)); - -} -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ -/** - * @} - */ -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DFSDM_Private_Functions DFSDM Private Functions - * @{ - */ - -/** - * @brief DMA half transfer complete callback for regular conversion. - * @param hdma DMA handle. - * @retval None - */ -static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma) -{ - /* Get DFSDM filter handle */ - DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; - - /* Call regular half conversion complete callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->RegConvHalfCpltCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterRegConvHalfCpltCallback(hdfsdm_filter); -#endif -} - -/** - * @brief DMA transfer complete callback for regular conversion. - * @param hdma DMA handle. - * @retval None - */ -static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma) -{ - /* Get DFSDM filter handle */ - DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; - - /* Call regular conversion complete callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->RegConvCpltCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter); -#endif -} - -/** - * @brief DMA half transfer complete callback for injected conversion. - * @param hdma DMA handle. - * @retval None - */ -static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma) -{ - /* Get DFSDM filter handle */ - DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; - - /* Call injected half conversion complete callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->InjConvHalfCpltCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterInjConvHalfCpltCallback(hdfsdm_filter); -#endif -} - -/** - * @brief DMA transfer complete callback for injected conversion. - * @param hdma DMA handle. - * @retval None - */ -static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma) -{ - /* Get DFSDM filter handle */ - DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; - - /* Call injected conversion complete callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->InjConvCpltCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter); -#endif -} - -/** - * @brief DMA error callback. - * @param hdma DMA handle. - * @retval None - */ -static void DFSDM_DMAError(DMA_HandleTypeDef *hdma) -{ - /* Get DFSDM filter handle */ - DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; - - /* Update error code */ - hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_DMA; - - /* Call error callback */ -#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) - hdfsdm_filter->ErrorCallback(hdfsdm_filter); -#else - HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); -#endif -} - -/** - * @brief This function allows to get the number of injected channels. - * @param Channels bitfield of injected channels. - * @retval Number of injected channels. - */ -static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels) -{ - uint32_t nbChannels = 0U; - uint32_t tmp; - - /* Get the number of channels from bitfield */ - tmp = (uint32_t) (Channels & DFSDM_LSB_MASK); - while(tmp != 0U) - { - if((tmp & 1U) != 0U) - { - nbChannels++; - } - tmp = (uint32_t) (tmp >> 1U); - } - return nbChannels; -} - -/** - * @brief This function allows to get the channel number from channel instance. - * @param Instance DFSDM channel instance. - * @retval Channel number. - */ -static uint32_t DFSDM_GetChannelFromInstance(DFSDM_Channel_TypeDef* Instance) -{ - uint32_t channel; - - /* Get channel from instance */ -#if defined(DFSDM2_Channel0) - if((Instance == DFSDM1_Channel0) || (Instance == DFSDM2_Channel0)) - { - channel = 0U; - } - else if((Instance == DFSDM1_Channel1) || (Instance == DFSDM2_Channel1)) - { - channel = 1U; - } - else if((Instance == DFSDM1_Channel2) || (Instance == DFSDM2_Channel2)) - { - channel = 2U; - } - else if((Instance == DFSDM1_Channel3) || (Instance == DFSDM2_Channel3)) - { - channel = 3U; - } - else if(Instance == DFSDM2_Channel4) - { - channel = 4U; - } - else if(Instance == DFSDM2_Channel5) - { - channel = 5U; - } - else if(Instance == DFSDM2_Channel6) - { - channel = 6U; - } - else /* DFSDM2_Channel7 */ - { - channel = 7U; - } - -#else - if(Instance == DFSDM1_Channel0) - { - channel = 0U; - } - else if(Instance == DFSDM1_Channel1) - { - channel = 1U; - } - else if(Instance == DFSDM1_Channel2) - { - channel = 2U; - } - else /* DFSDM1_Channel3 */ - { - channel = 3U; - } -#endif /* defined(DFSDM2_Channel0) */ - - return channel; -} - -/** - * @brief This function allows to really start regular conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter) -{ - /* Check regular trigger */ - if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) - { - /* Software start of regular conversion */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; - } - else /* synchronous trigger */ - { - /* Disable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); - - /* Set RSYNC bit in DFSDM_FLTCR1 register */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSYNC; - - /* Enable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; - - /* If injected conversion was in progress, restart it */ - if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) - { - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; - } - /* Update remaining injected conversions */ - hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ - hdfsdm_filter->InjectedChannelsNbr : 1U; - } - } - /* Update DFSDM filter state */ - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \ - HAL_DFSDM_FILTER_STATE_REG : HAL_DFSDM_FILTER_STATE_REG_INJ; -} - -/** - * @brief This function allows to really stop regular conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter) -{ - /* Disable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); - - /* If regular trigger was synchronous, reset RSYNC bit in DFSDM_FLTCR1 register */ - if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SYNC_TRIGGER) - { - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC); - } - - /* Enable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; - - /* If injected conversion was in progress, restart it */ - if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) - { - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; - } - /* Update remaining injected conversions */ - hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ - hdfsdm_filter->InjectedChannelsNbr : 1U; - } - - /* Update DFSDM filter state */ - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ - HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; -} - -/** - * @brief This function allows to really start injected conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter) -{ - /* Check injected trigger */ - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) - { - /* Software start of injected conversion */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; - } - else /* external or synchronous trigger */ - { - /* Disable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); - - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER) - { - /* Set JSYNC bit in DFSDM_FLTCR1 register */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSYNC; - } - else /* external trigger */ - { - /* Set JEXTEN[1:0] bits in DFSDM_FLTCR1 register */ - hdfsdm_filter->Instance->FLTCR1 |= hdfsdm_filter->ExtTriggerEdge; - } - - /* Enable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; - - /* If regular conversion was in progress, restart it */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) && \ - (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; - } - } - /* Update DFSDM filter state */ - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \ - HAL_DFSDM_FILTER_STATE_INJ : HAL_DFSDM_FILTER_STATE_REG_INJ; -} - -/** - * @brief This function allows to really stop injected conversion. - * @param hdfsdm_filter DFSDM filter handle. - * @retval None - */ -static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter) -{ - /* Disable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); - - /* If injected trigger was synchronous, reset JSYNC bit in DFSDM_FLTCR1 register */ - if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER) - { - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC); - } - else if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_EXT_TRIGGER) - { - /* Reset JEXTEN[1:0] bits in DFSDM_FLTCR1 register */ - hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JEXTEN); - } - - else - { - /* Nothing to do */ - } - /* Enable DFSDM filter */ - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; - - /* If regular conversion was in progress, restart it */ - if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) && \ - (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) - { - hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; - } - - /* Update remaining injected conversions */ - hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ - hdfsdm_filter->InjectedChannelsNbr : 1U; - - /* Update DFSDM filter state */ - hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ - HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; -} -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -#endif /* HAL_DFSDM_MODULE_ENABLED */ -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c deleted file mode 100644 index 3dbb477..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c +++ /dev/null @@ -1,1305 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.c - * @author MCD Application Team - * @brief DMA HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access (DMA) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and errors functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable and configure the peripheral to be connected to the DMA Stream - (except for internal SRAM/FLASH memories: no initialization is - necessary) please refer to Reference manual for connection between peripherals - and DMA requests. - - (#) For a given Stream, program the required configuration through the following parameters: - Transfer Direction, Source and Destination data formats, - Circular, Normal or peripheral flow control mode, Stream Priority level, - Source and Destination Increment mode, FIFO mode and its Threshold (if needed), - Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. - - -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros: - __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(). - - *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source - address and destination address and the Length of data to be transferred. - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this - case a fixed Timeout can be configured by User depending from his application. - (+) Use HAL_DMA_Abort() function to abort the current transfer. - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. In this - case the DMA interrupt is configured - (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e a member of DMA handle structure). - [..] - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error - detection. - - (#) Use HAL_DMA_Abort_IT() function to abort the current transfer - - -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. - - -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is - possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set - Half-Word data size for the peripheral to access its data register and set Word data size - for the Memory to gain in access time. Each two half words will be packed and written in - a single access to a Word in the Memory). - - -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source - and Destination. In this case the Peripheral Data Size will be applied to both Source - and Destination. - - *** DMA HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DMA HAL driver. - - (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. - (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. - - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA DMA - * @brief DMA HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register */ - __IO uint32_t Reserved0; - __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ -} DMA_Base_Registers; - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Constants - * @{ - */ - #define HAL_TIMEOUT_DMA_ABORT 5U /* 5 ms */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Functions - * @{ - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize the DMA Stream source - and destination addresses, incrementation and data sizes, transfer direction, - circular/normal mode selection, memory-to-memory mode selection and Stream priority value. - [..] - The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DMA according to the specified - * parameters in the DMA_InitTypeDef and create the associated handle. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp = 0U; - uint32_t tickstart = HAL_GetTick(); - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - assert_param(IS_DMA_CHANNEL(hdma->Init.Channel)); - assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); - assert_param(IS_DMA_MODE(hdma->Init.Mode)); - assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); - /* Check the memory burst, peripheral burst and FIFO threshold parameters only - when FIFO mode is enabled */ - if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) - { - assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); - assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); - assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); - } - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Allocate lock resource */ - __HAL_UNLOCK(hdma); - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - } - - /* Get the CR register value */ - tmp = hdma->Instance->CR; - - /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ - tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ - DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ - DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ - DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); - - /* Prepare the DMA Stream configuration */ - tmp |= hdma->Init.Channel | hdma->Init.Direction | - hdma->Init.PeriphInc | hdma->Init.MemInc | - hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | - hdma->Init.Mode | hdma->Init.Priority; - - /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get memory burst and peripheral burst */ - tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; - } - - /* Write to DMA Stream CR register */ - hdma->Instance->CR = tmp; - - /* Get the FCR register value */ - tmp = hdma->Instance->FCR; - - /* Clear Direct mode and FIFO threshold bits */ - tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); - - /* Prepare the DMA Stream FIFO configuration */ - tmp |= hdma->Init.FIFOMode; - - /* The FIFO threshold is not used when the FIFO mode is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get the FIFO threshold */ - tmp |= hdma->Init.FIFOThreshold; - - /* Check compatibility between FIFO threshold level and size of the memory burst */ - /* for INCR4, INCR8, INCR16 bursts */ - if (hdma->Init.MemBurst != DMA_MBURST_SINGLE) - { - if (DMA_CheckFifoParam(hdma) != HAL_OK) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_ERROR; - } - } - } - - /* Write to DMA Stream FCR */ - hdma->Instance->FCR = tmp; - - /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate - DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clear all interrupt flags */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the DMA peripheral - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) -{ - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the DMA peripheral state */ - if(hdma->State == HAL_DMA_STATE_BUSY) - { - /* Return error status */ - return HAL_BUSY; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - - /* Disable the selected DMA Streamx */ - __HAL_DMA_DISABLE(hdma); - - /* Reset DMA Streamx control register */ - hdma->Instance->CR = 0U; - - /* Reset DMA Streamx number of data to transfer register */ - hdma->Instance->NDTR = 0U; - - /* Reset DMA Streamx peripheral address register */ - hdma->Instance->PAR = 0U; - - /* Reset DMA Streamx memory 0 address register */ - hdma->Instance->M0AR = 0U; - - /* Reset DMA Streamx memory 1 address register */ - hdma->Instance->M1AR = 0U; - - /* Reset DMA Streamx FIFO control register */ - hdma->Instance->FCR = 0x00000021U; - - /* Get DMA steam Base Address */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clean all callbacks */ - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Reset the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Reset the DMA state */ - hdma->State = HAL_DMA_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group2 - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and - Start DMA transfer with interrupt - (+) Abort DMA transfer - (+) Poll for transfer complete - (+) Handle DMA interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Starts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Start the DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - - if(hdma->XferHalfCpltCallback != NULL) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - - return status; -} - -/** - * @brief Aborts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * - * @note After disabling a DMA Stream, a check for wait until the DMA Stream is - * effectively disabled is added. If a Stream is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Stream will be effectively disabled only after the transfer of - * this single data is finished. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) -{ - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - uint32_t tickstart = HAL_GetTick(); - - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - else - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Change the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - return HAL_OK; -} - -/** - * @brief Aborts the DMA Transfer in Interrupt mode. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) -{ - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - return HAL_ERROR; - } - else - { - /* Set Abort State */ - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - } - - return HAL_OK; -} - -/** - * @brief Polling for transfer complete. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CompleteLevel Specifies the DMA level complete. - * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead. - * This model could be used for debug purpose. - * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t mask_cpltlevel; - uint32_t tickstart = HAL_GetTick(); - uint32_t tmpisr; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs; - - if(HAL_DMA_STATE_BUSY != hdma->State) - { - /* No transfer ongoing */ - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - __HAL_UNLOCK(hdma); - return HAL_ERROR; - } - - /* Polling mode not supported in circular mode and double buffering mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - } - else - { - /* Half Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - } - - regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - tmpisr = regs->ISR; - - while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET)) - { - /* Check for the Timeout (Not applicable in circular mode)*/ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - - /* Get the ISR register value */ - tmpisr = regs->ISR; - - if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - - /* Clear the Direct Mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - } - } - - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - HAL_DMA_Abort(hdma); - - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - else - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex; - } - - return status; -} - -/** - * @brief Handles DMA interrupt request. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval None - */ -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) -{ - uint32_t tmpisr; - __IO uint32_t count = 0U; - uint32_t timeout = SystemCoreClock / 9600U; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - tmpisr = regs->ISR; - - /* Transfer Error Interrupt management ***************************************/ - if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET) - { - /* Disable the transfer error interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TE); - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - } - } - /* FIFO Error Interrupt management ******************************************/ - if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET) - { - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - } - } - /* Direct Mode Error Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET) - { - /* Clear the direct mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - } - } - /* Half Transfer Complete Interrupt management ******************************/ - if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET) - { - /* Clear the half transfer complete flag */ - regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - - /* Multi_Buffering mode enabled */ - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferM1HalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferM1HalfCpltCallback(hdma); - } - } - } - else - { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the half transfer interrupt */ - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - } - } - /* Transfer Complete Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET) - { - /* Clear the transfer complete flag */ - regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - - if(HAL_DMA_STATE_ABORT == hdma->State) - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferAbortCallback != NULL) - { - hdma->XferAbortCallback(hdma); - } - return; - } - - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferM1CpltCallback != NULL) - { - /* Transfer complete Callback for memory1 */ - hdma->XferM1CpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete Callback for memory0 */ - hdma->XferCpltCallback(hdma); - } - } - } - /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ - else - { - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the transfer complete interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TC); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } - } - } - } - - /* manage error case */ - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - do - { - if (++count > timeout) - { - break; - } - } - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - - if(hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } -} - -/** - * @brief Register callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifier - * a DMA_HandleTypeDef structure as parameter. - * @param pCallback pointer to private callback function which has pointer to - * a DMA_HandleTypeDef structure as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) -{ - - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = pCallback; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = pCallback; - break; - - default: - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @brief UnRegister callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifier - * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = NULL; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = NULL; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = NULL; - break; - - case HAL_DMA_XFER_ALL_CB_ID: - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - break; - - default: - status = HAL_ERROR; - break; - } - } - else - { - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group3 - * -@verbatim - =============================================================================== - ##### State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA state - (+) Get error code - -@endverbatim - * @{ - */ - -/** - * @brief Returns the DMA state. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL state - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) -{ - return hdma->State; -} - -/** - * @brief Return the DMA error code - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval DMA Error Code - */ -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) -{ - return hdma->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Sets the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Clear DBM bit */ - hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM); - - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Memory to Peripheral */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Peripheral to Memory */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @brief Returns the DMA Stream base address depending on stream number - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval Stream base address - */ -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) -{ - uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U; - - /* lookup table for necessary bitshift of flags within status registers */ - static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; - hdma->StreamIndex = flagBitshiftOffset[stream_number]; - - if (stream_number > 3U) - { - /* return pointer to HISR and HIFCR */ - hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U); - } - else - { - /* return pointer to LISR and LIFCR */ - hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)); - } - - return hdma->StreamBaseAddress; -} - -/** - * @brief Check compatibility between FIFO threshold level and size of the memory burst - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmp = hdma->Init.FIFOThreshold; - - /* Memory Data size equal to Byte */ - if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - break; - default: - break; - } - } - - /* Memory Data size equal to Half-Word */ - else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - /* Memory Data size equal to Word */ - else - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_HALFFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_FULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - return status; -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c deleted file mode 100644 index 4cfac40..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c +++ /dev/null @@ -1,2126 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma2d.c - * @author MCD Application Team - * @brief DMA2D HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the DMA2D peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Program the required configuration through the following parameters: - the transfer mode, the output color mode and the output offset using - HAL_DMA2D_Init() function. - - (#) Program the required configuration through the following parameters: - the input color mode, the input color, the input alpha value, the alpha mode, - the red/blue swap mode, the inverted alpha mode and the input offset using - HAL_DMA2D_ConfigLayer() function for foreground or/and background layer. - - *** Polling mode IO operation *** - ================================= - [..] - (#) Configure pdata parameter (explained hereafter), destination and data length - and enable the transfer using HAL_DMA2D_Start(). - (#) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage - user can specify the value of timeout according to his end application. - - *** Interrupt mode IO operation *** - =================================== - [..] - (#) Configure pdata parameter, destination and data length and enable - the transfer using HAL_DMA2D_Start_IT(). - (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() interrupt subroutine. - (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback (member - of DMA2D handle structure). - (#) In case of error, the HAL_DMA2D_IRQHandler() function calls the callback - XferErrorCallback. - - -@- In Register-to-Memory transfer mode, pdata parameter is the register - color, in Memory-to-memory or Memory-to-Memory with pixel format - conversion pdata is the source address. - - -@- Configure the foreground source address, the background source address, - the destination and data length then Enable the transfer using - HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT() - in interrupt mode. - - -@- HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions - are used if the memory to memory with blending transfer mode is selected. - - (#) Optionally, configure and enable the CLUT using HAL_DMA2D_CLUTLoad() in polling - mode or HAL_DMA2D_CLUTLoad_IT() in interrupt mode. - - (#) Optionally, configure the line watermark in using the API HAL_DMA2D_ProgramLineEvent(). - - (#) Optionally, configure the dead time value in the AHB clock cycle inserted between two - consecutive accesses on the AHB master port in using the API HAL_DMA2D_ConfigDeadTime() - and enable/disable the functionality with the APIs HAL_DMA2D_EnableDeadTime() or - HAL_DMA2D_DisableDeadTime(). - - (#) The transfer can be suspended, resumed and aborted using the following - functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort(). - - (#) The CLUT loading can be suspended, resumed and aborted using the following - functions: HAL_DMA2D_CLUTLoading_Suspend(), HAL_DMA2D_CLUTLoading_Resume(), - HAL_DMA2D_CLUTLoading_Abort(). - - (#) To control the DMA2D state, use the following function: HAL_DMA2D_GetState(). - - (#) To read the DMA2D error code, use the following function: HAL_DMA2D_GetError(). - - *** DMA2D HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DMA2D HAL driver : - - (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral. - (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags. - (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags. - (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts. - (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts. - (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt is enabled or not. - - *** Callback registration *** - =================================== - [..] - (#) The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use function @ref HAL_DMA2D_RegisterCallback() to register a user callback. - - (#) Function @ref HAL_DMA2D_RegisterCallback() allows to register following callbacks: - (+) XferCpltCallback : callback for transfer complete. - (+) XferErrorCallback : callback for transfer error. - (+) LineEventCallback : callback for line event. - (+) CLUTLoadingCpltCallback : callback for CLUT loading completion. - (+) MspInitCallback : DMA2D MspInit. - (+) MspDeInitCallback : DMA2D MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - (#) Use function @ref HAL_DMA2D_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - @ref HAL_DMA2D_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) XferCpltCallback : callback for transfer complete. - (+) XferErrorCallback : callback for transfer error. - (+) LineEventCallback : callback for line event. - (+) CLUTLoadingCpltCallback : callback for CLUT loading completion. - (+) MspInitCallback : DMA2D MspInit. - (+) MspDeInitCallback : DMA2D MspDeInit. - - (#) By default, after the @ref HAL_DMA2D_Init and if the state is HAL_DMA2D_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions: - examples @ref HAL_DMA2D_LineEventCallback(), @ref HAL_DMA2D_CLUTLoadingCpltCallback() - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the @ref HAL_DMA2D_Init - and @ref HAL_DMA2D_DeInit only when these callbacks are null (not registered beforehand) - If not, MspInit or MspDeInit are not null, the @ref HAL_DMA2D_Init and @ref HAL_DMA2D_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - Exception as well for Transfer Completion and Transfer Error callbacks that are not defined - as weak (surcharged) functions. They must be defined by the user to be resorted to. - - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_DMA2D_RegisterCallback before calling @ref HAL_DMA2D_DeInit - or @ref HAL_DMA2D_Init function. - - When The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - [..] - (@) You can refer to the DMA2D HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -#ifdef HAL_DMA2D_MODULE_ENABLED -#if defined (DMA2D) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA2D DMA2D - * @brief DMA2D HAL module driver - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Constants DMA2D Private Constants - * @{ - */ - -/** @defgroup DMA2D_TimeOut DMA2D Time Out - * @{ - */ -#define DMA2D_TIMEOUT_ABORT (1000U) /*!< 1s */ -#define DMA2D_TIMEOUT_SUSPEND (1000U) /*!< 1s */ -/** - * @} - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup DMA2D_Private_Functions DMA2D Private Functions - * @{ - */ -static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, - uint32_t Height); -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions - * @{ - */ - -/** @defgroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the DMA2D - (+) De-initialize the DMA2D - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DMA2D according to the specified - * parameters in the DMA2D_InitTypeDef and create the associated handle. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d) -{ - /* Check the DMA2D peripheral state */ - if (hdma2d == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance)); - assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode)); - assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode)); - assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset)); - -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) - if (hdma2d->State == HAL_DMA2D_STATE_RESET) - { - /* Reset Callback pointers in HAL_DMA2D_STATE_RESET only */ - hdma2d->LineEventCallback = HAL_DMA2D_LineEventCallback; - hdma2d->CLUTLoadingCpltCallback = HAL_DMA2D_CLUTLoadingCpltCallback; - if (hdma2d->MspInitCallback == NULL) - { - hdma2d->MspInitCallback = HAL_DMA2D_MspInit; - } - - /* Init the low level hardware */ - hdma2d->MspInitCallback(hdma2d); - } -#else - if (hdma2d->State == HAL_DMA2D_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hdma2d->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - HAL_DMA2D_MspInit(hdma2d); - } -#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* DMA2D CR register configuration -------------------------------------------*/ - MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_MODE, hdma2d->Init.Mode); - - /* DMA2D OPFCCR register configuration ---------------------------------------*/ - MODIFY_REG(hdma2d->Instance->OPFCCR, DMA2D_OPFCCR_CM, hdma2d->Init.ColorMode); - - /* DMA2D OOR register configuration ------------------------------------------*/ - MODIFY_REG(hdma2d->Instance->OOR, DMA2D_OOR_LO, hdma2d->Init.OutputOffset); - - - /* Update error code */ - hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE; - - /* Initialize the DMA2D state*/ - hdma2d->State = HAL_DMA2D_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Deinitializes the DMA2D peripheral registers to their default reset - * values. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval None - */ - -HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d) -{ - - /* Check the DMA2D peripheral state */ - if (hdma2d == NULL) - { - return HAL_ERROR; - } - - /* Before aborting any DMA2D transfer or CLUT loading, check - first whether or not DMA2D clock is enabled */ - if (__HAL_RCC_DMA2D_IS_CLK_ENABLED()) - { - /* Abort DMA2D transfer if any */ - if ((hdma2d->Instance->CR & DMA2D_CR_START) == DMA2D_CR_START) - { - if (HAL_DMA2D_Abort(hdma2d) != HAL_OK) - { - /* Issue when aborting DMA2D transfer */ - return HAL_ERROR; - } - } - else - { - /* Abort background CLUT loading if any */ - if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START) - { - if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 0U) != HAL_OK) - { - /* Issue when aborting background CLUT loading */ - return HAL_ERROR; - } - } - else - { - /* Abort foreground CLUT loading if any */ - if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START) - { - if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 1U) != HAL_OK) - { - /* Issue when aborting foreground CLUT loading */ - return HAL_ERROR; - } - } - } - } - } - - /* Reset DMA2D control registers*/ - hdma2d->Instance->CR = 0U; - hdma2d->Instance->IFCR = 0x3FU; - hdma2d->Instance->FGOR = 0U; - hdma2d->Instance->BGOR = 0U; - hdma2d->Instance->FGPFCCR = 0U; - hdma2d->Instance->BGPFCCR = 0U; - hdma2d->Instance->OPFCCR = 0U; - -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) - - if (hdma2d->MspDeInitCallback == NULL) - { - hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; - } - - /* DeInit the low level hardware */ - hdma2d->MspDeInitCallback(hdma2d); - -#else - /* Carry on with de-initialization of low level hardware */ - HAL_DMA2D_MspDeInit(hdma2d); -#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ - - /* Update error code */ - hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE; - - /* Initialize the DMA2D state*/ - hdma2d->State = HAL_DMA2D_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @brief Initializes the DMA2D MSP. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval None - */ -__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdma2d); - - /* NOTE : This function should not be modified; when the callback is needed, - the HAL_DMA2D_MspInit can be implemented in the user file. - */ -} - -/** - * @brief DeInitializes the DMA2D MSP. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval None - */ -__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdma2d); - - /* NOTE : This function should not be modified; when the callback is needed, - the HAL_DMA2D_MspDeInit can be implemented in the user file. - */ -} - -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User DMA2D Callback - * To be used instead of the weak (surcharged) predefined callback - * @param hdma2d DMA2D handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_DMA2D_TRANSFERCOMPLETE_CB_ID DMA2D transfer complete Callback ID - * @arg @ref HAL_DMA2D_TRANSFERERROR_CB_ID DMA2D transfer error Callback ID - * @arg @ref HAL_DMA2D_LINEEVENT_CB_ID DMA2D line event Callback ID - * @arg @ref HAL_DMA2D_CLUTLOADINGCPLT_CB_ID DMA2D CLUT loading completion Callback ID - * @arg @ref HAL_DMA2D_MSPINIT_CB_ID DMA2D MspInit callback ID - * @arg @ref HAL_DMA2D_MSPDEINIT_CB_ID DMA2D MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @note No weak predefined callbacks are defined for HAL_DMA2D_TRANSFERCOMPLETE_CB_ID or HAL_DMA2D_TRANSFERERROR_CB_ID - * @retval status - */ -HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, - pDMA2D_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hdma2d); - - if (HAL_DMA2D_STATE_READY == hdma2d->State) - { - switch (CallbackID) - { - case HAL_DMA2D_TRANSFERCOMPLETE_CB_ID : - hdma2d->XferCpltCallback = pCallback; - break; - - case HAL_DMA2D_TRANSFERERROR_CB_ID : - hdma2d->XferErrorCallback = pCallback; - break; - - case HAL_DMA2D_LINEEVENT_CB_ID : - hdma2d->LineEventCallback = pCallback; - break; - - case HAL_DMA2D_CLUTLOADINGCPLT_CB_ID : - hdma2d->CLUTLoadingCpltCallback = pCallback; - break; - - case HAL_DMA2D_MSPINIT_CB_ID : - hdma2d->MspInitCallback = pCallback; - break; - - case HAL_DMA2D_MSPDEINIT_CB_ID : - hdma2d->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_DMA2D_STATE_RESET == hdma2d->State) - { - switch (CallbackID) - { - case HAL_DMA2D_MSPINIT_CB_ID : - hdma2d->MspInitCallback = pCallback; - break; - - case HAL_DMA2D_MSPDEINIT_CB_ID : - hdma2d->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma2d); - return status; -} - -/** - * @brief Unregister a DMA2D Callback - * DMA2D Callback is redirected to the weak (surcharged) predefined callback - * @param hdma2d DMA2D handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_DMA2D_TRANSFERCOMPLETE_CB_ID DMA2D transfer complete Callback ID - * @arg @ref HAL_DMA2D_TRANSFERERROR_CB_ID DMA2D transfer error Callback ID - * @arg @ref HAL_DMA2D_LINEEVENT_CB_ID DMA2D line event Callback ID - * @arg @ref HAL_DMA2D_CLUTLOADINGCPLT_CB_ID DMA2D CLUT loading completion Callback ID - * @arg @ref HAL_DMA2D_MSPINIT_CB_ID DMA2D MspInit callback ID - * @arg @ref HAL_DMA2D_MSPDEINIT_CB_ID DMA2D MspDeInit callback ID - * @note No weak predefined callbacks are defined for HAL_DMA2D_TRANSFERCOMPLETE_CB_ID or HAL_DMA2D_TRANSFERERROR_CB_ID - * @retval status - */ -HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma2d); - - if (HAL_DMA2D_STATE_READY == hdma2d->State) - { - switch (CallbackID) - { - case HAL_DMA2D_TRANSFERCOMPLETE_CB_ID : - hdma2d->XferCpltCallback = NULL; - break; - - case HAL_DMA2D_TRANSFERERROR_CB_ID : - hdma2d->XferErrorCallback = NULL; - break; - - case HAL_DMA2D_LINEEVENT_CB_ID : - hdma2d->LineEventCallback = HAL_DMA2D_LineEventCallback; - break; - - case HAL_DMA2D_CLUTLOADINGCPLT_CB_ID : - hdma2d->CLUTLoadingCpltCallback = HAL_DMA2D_CLUTLoadingCpltCallback; - break; - - case HAL_DMA2D_MSPINIT_CB_ID : - hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */ - break; - - case HAL_DMA2D_MSPDEINIT_CB_ID : - hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ - break; - - default : - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_DMA2D_STATE_RESET == hdma2d->State) - { - switch (CallbackID) - { - case HAL_DMA2D_MSPINIT_CB_ID : - hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */ - break; - - case HAL_DMA2D_MSPDEINIT_CB_ID : - hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ - break; - - default : - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma2d); - return status; -} -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ - -/** - * @} - */ - - -/** @defgroup DMA2D_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the pdata, destination address and data size then - start the DMA2D transfer. - (+) Configure the source for foreground and background, destination address - and data size then start a MultiBuffer DMA2D transfer. - (+) Configure the pdata, destination address and data size then - start the DMA2D transfer with interrupt. - (+) Configure the source for foreground and background, destination address - and data size then start a MultiBuffer DMA2D transfer with interrupt. - (+) Abort DMA2D transfer. - (+) Suspend DMA2D transfer. - (+) Resume DMA2D transfer. - (+) Enable CLUT transfer. - (+) Configure CLUT loading then start transfer in polling mode. - (+) Configure CLUT loading then start transfer in interrupt mode. - (+) Abort DMA2D CLUT loading. - (+) Suspend DMA2D CLUT loading. - (+) Resume DMA2D CLUT loading. - (+) Poll for transfer complete. - (+) handle DMA2D interrupt request. - (+) Transfer watermark callback. - (+) CLUT Transfer Complete callback. - - -@endverbatim - * @{ - */ - -/** - * @brief Start the DMA2D Transfer. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param pdata Configure the source memory Buffer address if - * Memory-to-Memory or Memory-to-Memory with pixel format - * conversion mode is selected, or configure - * the color value if Register-to-Memory mode is selected. - * @param DstAddress The destination memory Buffer address. - * @param Width The width of data to be transferred from source - * to destination (expressed in number of pixels per line). - * @param Height The height of data to be transferred from source to destination (expressed in number of lines). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, - uint32_t Height) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LINE(Height)); - assert_param(IS_DMA2D_PIXEL(Width)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the source, destination address and the data size */ - DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height); - - /* Enable the Peripheral */ - __HAL_DMA2D_ENABLE(hdma2d); - - return HAL_OK; -} - -/** - * @brief Start the DMA2D Transfer with interrupt enabled. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param pdata Configure the source memory Buffer address if - * the Memory-to-Memory or Memory-to-Memory with pixel format - * conversion mode is selected, or configure - * the color value if Register-to-Memory mode is selected. - * @param DstAddress The destination memory Buffer address. - * @param Width The width of data to be transferred from source - * to destination (expressed in number of pixels per line). - * @param Height The height of data to be transferred from source to destination (expressed in number of lines). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, - uint32_t Height) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LINE(Height)); - assert_param(IS_DMA2D_PIXEL(Width)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the source, destination address and the data size */ - DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height); - - /* Enable the transfer complete, transfer error and configuration error interrupts */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); - - /* Enable the Peripheral */ - __HAL_DMA2D_ENABLE(hdma2d); - - return HAL_OK; -} - -/** - * @brief Start the multi-source DMA2D Transfer. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param SrcAddress1 The source memory Buffer address for the foreground layer. - * @param SrcAddress2 The source memory Buffer address for the background layer. - * @param DstAddress The destination memory Buffer address. - * @param Width The width of data to be transferred from source - * to destination (expressed in number of pixels per line). - * @param Height The height of data to be transferred from source to destination (expressed in number of lines). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, - uint32_t DstAddress, uint32_t Width, uint32_t Height) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LINE(Height)); - assert_param(IS_DMA2D_PIXEL(Width)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure DMA2D Stream source2 address */ - WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2); - - /* Configure the source, destination address and the data size */ - DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); - - /* Enable the Peripheral */ - __HAL_DMA2D_ENABLE(hdma2d); - - return HAL_OK; -} - -/** - * @brief Start the multi-source DMA2D Transfer with interrupt enabled. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param SrcAddress1 The source memory Buffer address for the foreground layer. - * @param SrcAddress2 The source memory Buffer address for the background layer. - * @param DstAddress The destination memory Buffer address. - * @param Width The width of data to be transferred from source - * to destination (expressed in number of pixels per line). - * @param Height The height of data to be transferred from source to destination (expressed in number of lines). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, - uint32_t DstAddress, uint32_t Width, uint32_t Height) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LINE(Height)); - assert_param(IS_DMA2D_PIXEL(Width)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure DMA2D Stream source2 address */ - WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2); - - /* Configure the source, destination address and the data size */ - DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); - - /* Enable the transfer complete, transfer error and configuration error interrupts */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); - - /* Enable the Peripheral */ - __HAL_DMA2D_ENABLE(hdma2d); - - return HAL_OK; -} - -/** - * @brief Abort the DMA2D Transfer. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d) -{ - uint32_t tickstart; - - /* Abort the DMA2D transfer */ - /* START bit is reset to make sure not to set it again, in the event the HW clears it - between the register read and the register write by the CPU (writing 0 has no - effect on START bitvalue) */ - MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if the DMA2D is effectively disabled */ - while ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) - { - if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_ABORT) - { - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; - - /* Change the DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_TIMEOUT; - } - } - - /* Disable the Transfer Complete, Transfer Error and Configuration Error interrupts */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); - - /* Change the DMA2D state*/ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @brief Suspend the DMA2D Transfer. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d) -{ - uint32_t tickstart; - - /* Suspend the DMA2D transfer */ - /* START bit is reset to make sure not to set it again, in the event the HW clears it - between the register read and the register write by the CPU (writing 0 has no - effect on START bitvalue). */ - MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if the DMA2D is effectively suspended */ - while ((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == DMA2D_CR_START) - { - if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_SUSPEND) - { - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; - - /* Change the DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - } - - /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */ - if ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) - { - hdma2d->State = HAL_DMA2D_STATE_SUSPEND; - } - else - { - /* Make sure SUSP bit is cleared since it is meaningless - when no transfer is on-going */ - CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); - } - - return HAL_OK; -} - -/** - * @brief Resume the DMA2D Transfer. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d) -{ - /* Check the SUSP and START bits */ - if ((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == (DMA2D_CR_SUSP | DMA2D_CR_START)) - { - /* Ongoing transfer is suspended: change the DMA2D state before resuming */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - } - - /* Resume the DMA2D transfer */ - /* START bit is reset to make sure not to set it again, in the event the HW clears it - between the register read and the register write by the CPU (writing 0 has no - effect on START bitvalue). */ - CLEAR_BIT(hdma2d->Instance->CR, (DMA2D_CR_SUSP | DMA2D_CR_START)); - - return HAL_OK; -} - - -/** - * @brief Enable the DMA2D CLUT Transfer. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Enable the background CLUT loading */ - SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); - } - else - { - /* Enable the foreground CLUT loading */ - SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); - } - - return HAL_OK; -} - -/** - * @brief Start DMA2D CLUT Loading. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains - * the configuration information for the color look up table. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - assert_param(IS_DMA2D_CLUT_CM(CLUTCfg->CLUTColorMode)); - assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg->Size)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the CLUT of the background DMA2D layer */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Write background CLUT memory address */ - WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg->pCLUT); - - /* Write background CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), - ((CLUTCfg->Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); - - /* Enable the CLUT loading for the background */ - SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); - } - /* Configure the CLUT of the foreground DMA2D layer */ - else - { - /* Write foreground CLUT memory address */ - WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg->pCLUT); - - /* Write foreground CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), - ((CLUTCfg->Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); - - /* Enable the CLUT loading for the foreground */ - SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); - } - - return HAL_OK; -} - -/** - * @brief Start DMA2D CLUT Loading with interrupt enabled. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains - * the configuration information for the color look up table. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, - uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - assert_param(IS_DMA2D_CLUT_CM(CLUTCfg->CLUTColorMode)); - assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg->Size)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the CLUT of the background DMA2D layer */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Write background CLUT memory address */ - WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg->pCLUT); - - /* Write background CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), - ((CLUTCfg->Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); - - /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); - - /* Enable the CLUT loading for the background */ - SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); - } - /* Configure the CLUT of the foreground DMA2D layer */ - else - { - /* Write foreground CLUT memory address */ - WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg->pCLUT); - - /* Write foreground CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), - ((CLUTCfg->Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); - - /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); - - /* Enable the CLUT loading for the foreground */ - SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); - } - - return HAL_OK; -} - -/** - * @brief Start DMA2D CLUT Loading. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains - * the configuration information for the color look up table. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @note API obsolete and maintained for compatibility with legacy. User is - * invited to resort to HAL_DMA2D_CLUTStartLoad() instead to benefit from - * code compactness, code size and improved heap usage. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); - assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the CLUT of the background DMA2D layer */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Write background CLUT memory address */ - WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); - - /* Write background CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), - ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); - - /* Enable the CLUT loading for the background */ - SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); - } - /* Configure the CLUT of the foreground DMA2D layer */ - else - { - /* Write foreground CLUT memory address */ - WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); - - /* Write foreground CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), - ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); - - /* Enable the CLUT loading for the foreground */ - SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); - } - - return HAL_OK; -} - -/** - * @brief Start DMA2D CLUT Loading with interrupt enabled. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains - * the configuration information for the color look up table. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @note API obsolete and maintained for compatibility with legacy. User is - * invited to resort to HAL_DMA2D_CLUTStartLoad_IT() instead to benefit - * from code compactness, code size and improved heap usage. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); - assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the CLUT of the background DMA2D layer */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Write background CLUT memory address */ - WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); - - /* Write background CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), - ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); - - /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); - - /* Enable the CLUT loading for the background */ - SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); - } - /* Configure the CLUT of the foreground DMA2D layer */ - else - { - /* Write foreground CLUT memory address */ - WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); - - /* Write foreground CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), - ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); - - /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); - - /* Enable the CLUT loading for the foreground */ - SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); - } - - return HAL_OK; -} - -/** - * @brief Abort the DMA2D CLUT loading. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) -{ - uint32_t tickstart; - const __IO uint32_t *reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */ - - /* Abort the CLUT loading */ - SET_BIT(hdma2d->Instance->CR, DMA2D_CR_ABORT); - - /* If foreground CLUT loading is considered, update local variables */ - if (LayerIdx == DMA2D_FOREGROUND_LAYER) - { - reg = &(hdma2d->Instance->FGPFCCR); - } - - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if the CLUT loading is aborted */ - while ((*reg & DMA2D_BGPFCCR_START) != 0U) - { - if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_ABORT) - { - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; - - /* Change the DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_TIMEOUT; - } - } - - /* Disable the CLUT Transfer Complete, Transfer Error, Configuration Error and CLUT Access Error interrupts */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); - - /* Change the DMA2D state*/ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @brief Suspend the DMA2D CLUT loading. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) -{ - uint32_t tickstart; - uint32_t loadsuspended; - const __IO uint32_t *reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */ - - /* Suspend the CLUT loading */ - SET_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); - - /* If foreground CLUT loading is considered, update local variables */ - if (LayerIdx == DMA2D_FOREGROUND_LAYER) - { - reg = &(hdma2d->Instance->FGPFCCR); - } - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if the CLUT loading is suspended */ - /* 1st condition: Suspend Check */ - loadsuspended = ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) ? 1UL : 0UL; - /* 2nd condition: Not Start Check */ - loadsuspended |= ((*reg & DMA2D_BGPFCCR_START) != DMA2D_BGPFCCR_START) ? 1UL : 0UL; - while (loadsuspended == 0UL) - { - if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_SUSPEND) - { - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; - - /* Change the DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - /* 1st condition: Suspend Check */ - loadsuspended = ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) ? 1UL : 0UL; - /* 2nd condition: Not Start Check */ - loadsuspended |= ((*reg & DMA2D_BGPFCCR_START) != DMA2D_BGPFCCR_START) ? 1UL : 0UL; - } - - /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */ - if ((*reg & DMA2D_BGPFCCR_START) != 0U) - { - hdma2d->State = HAL_DMA2D_STATE_SUSPEND; - } - else - { - /* Make sure SUSP bit is cleared since it is meaningless - when no transfer is on-going */ - CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); - } - - return HAL_OK; -} - -/** - * @brief Resume the DMA2D CLUT loading. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) -{ - /* Check the SUSP and START bits for background or foreground CLUT loading */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Background CLUT loading suspension check */ - if ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) - { - if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START) - { - /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - } - } - } - else - { - /* Foreground CLUT loading suspension check */ - if ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) - { - if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START) - { - /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - } - } - } - - /* Resume the CLUT loading */ - CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); - - return HAL_OK; -} - - -/** - - * @brief Polling for transfer complete or CLUT loading. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout) -{ - uint32_t tickstart; - uint32_t layer_start; - __IO uint32_t isrflags = 0x0U; - - /* Polling for DMA2D transfer */ - if ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - while (__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == 0U) - { - isrflags = READ_REG(hdma2d->Instance->ISR); - if ((isrflags & (DMA2D_FLAG_CE | DMA2D_FLAG_TE)) != 0U) - { - if ((isrflags & DMA2D_FLAG_CE) != 0U) - { - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; - } - if ((isrflags & DMA2D_FLAG_TE) != 0U) - { - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; - } - /* Clear the transfer and configuration error flags */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE | DMA2D_FLAG_TE); - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_ERROR; - } - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; - - /* Change the DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_TIMEOUT; - } - } - } - } - /* Polling for CLUT loading (foreground or background) */ - layer_start = hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START; - layer_start |= hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START; - if (layer_start != 0U) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - while (__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == 0U) - { - isrflags = READ_REG(hdma2d->Instance->ISR); - if ((isrflags & (DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE)) != 0U) - { - if ((isrflags & DMA2D_FLAG_CAE) != 0U) - { - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE; - } - if ((isrflags & DMA2D_FLAG_CE) != 0U) - { - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; - } - if ((isrflags & DMA2D_FLAG_TE) != 0U) - { - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; - } - /* Clear the CLUT Access Error, Configuration Error and Transfer Error flags */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE); - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_ERROR; - } - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; - - /* Change the DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_TIMEOUT; - } - } - } - } - - /* Clear the transfer complete and CLUT loading flags */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC | DMA2D_FLAG_CTC); - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} -/** - * @brief Handle DMA2D interrupt request. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval HAL status - */ -void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d) -{ - uint32_t isrflags = READ_REG(hdma2d->Instance->ISR); - uint32_t crflags = READ_REG(hdma2d->Instance->CR); - - /* Transfer Error Interrupt management ***************************************/ - if ((isrflags & DMA2D_FLAG_TE) != 0U) - { - if ((crflags & DMA2D_IT_TE) != 0U) - { - /* Disable the transfer Error interrupt */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE); - - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; - - /* Clear the transfer error flag */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE); - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - if (hdma2d->XferErrorCallback != NULL) - { - /* Transfer error Callback */ - hdma2d->XferErrorCallback(hdma2d); - } - } - } - /* Configuration Error Interrupt management **********************************/ - if ((isrflags & DMA2D_FLAG_CE) != 0U) - { - if ((crflags & DMA2D_IT_CE) != 0U) - { - /* Disable the Configuration Error interrupt */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE); - - /* Clear the Configuration error flag */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE); - - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - if (hdma2d->XferErrorCallback != NULL) - { - /* Transfer error Callback */ - hdma2d->XferErrorCallback(hdma2d); - } - } - } - /* CLUT access Error Interrupt management ***********************************/ - if ((isrflags & DMA2D_FLAG_CAE) != 0U) - { - if ((crflags & DMA2D_IT_CAE) != 0U) - { - /* Disable the CLUT access error interrupt */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CAE); - - /* Clear the CLUT access error flag */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE); - - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE; - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - if (hdma2d->XferErrorCallback != NULL) - { - /* Transfer error Callback */ - hdma2d->XferErrorCallback(hdma2d); - } - } - } - /* Transfer watermark Interrupt management **********************************/ - if ((isrflags & DMA2D_FLAG_TW) != 0U) - { - if ((crflags & DMA2D_IT_TW) != 0U) - { - /* Disable the transfer watermark interrupt */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TW); - - /* Clear the transfer watermark flag */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TW); - - /* Transfer watermark Callback */ -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) - hdma2d->LineEventCallback(hdma2d); -#else - HAL_DMA2D_LineEventCallback(hdma2d); -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ - - } - } - /* Transfer Complete Interrupt management ************************************/ - if ((isrflags & DMA2D_FLAG_TC) != 0U) - { - if ((crflags & DMA2D_IT_TC) != 0U) - { - /* Disable the transfer complete interrupt */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC); - - /* Clear the transfer complete flag */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC); - - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE; - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - if (hdma2d->XferCpltCallback != NULL) - { - /* Transfer complete Callback */ - hdma2d->XferCpltCallback(hdma2d); - } - } - } - /* CLUT Transfer Complete Interrupt management ******************************/ - if ((isrflags & DMA2D_FLAG_CTC) != 0U) - { - if ((crflags & DMA2D_IT_CTC) != 0U) - { - /* Disable the CLUT transfer complete interrupt */ - __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC); - - /* Clear the CLUT transfer complete flag */ - __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC); - - /* Update error code */ - hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE; - - /* Change DMA2D state */ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - /* CLUT Transfer complete Callback */ -#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) - hdma2d->CLUTLoadingCpltCallback(hdma2d); -#else - HAL_DMA2D_CLUTLoadingCpltCallback(hdma2d); -#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ - } - } - -} - -/** - * @brief Transfer watermark callback. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval None - */ -__weak void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdma2d); - - /* NOTE : This function should not be modified; when the callback is needed, - the HAL_DMA2D_LineEventCallback can be implemented in the user file. - */ -} - -/** - * @brief CLUT Transfer Complete callback. - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval None - */ -__weak void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdma2d); - - /* NOTE : This function should not be modified; when the callback is needed, - the HAL_DMA2D_CLUTLoadingCpltCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup DMA2D_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the DMA2D foreground or background layer parameters. - (+) Configure the DMA2D CLUT transfer. - (+) Configure the line watermark - (+) Configure the dead time value. - (+) Enable or disable the dead time value functionality. - - -@endverbatim - * @{ - */ - -/** - * @brief Configure the DMA2D Layer according to the specified - * parameters in the DMA2D_HandleTypeDef. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) -{ - DMA2D_LayerCfgTypeDef *pLayerCfg; - uint32_t regMask; - uint32_t regValue; - - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - assert_param(IS_DMA2D_OFFSET(hdma2d->LayerCfg[LayerIdx].InputOffset)); - if (hdma2d->Init.Mode != DMA2D_R2M) - { - assert_param(IS_DMA2D_INPUT_COLOR_MODE(hdma2d->LayerCfg[LayerIdx].InputColorMode)); - if (hdma2d->Init.Mode != DMA2D_M2M) - { - assert_param(IS_DMA2D_ALPHA_MODE(hdma2d->LayerCfg[LayerIdx].AlphaMode)); - } - } - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - pLayerCfg = &hdma2d->LayerCfg[LayerIdx]; - - /* Prepare the value to be written to the BGPFCCR or FGPFCCR register */ - regValue = pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << DMA2D_BGPFCCR_AM_Pos); - regMask = DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA; - - - if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) - { - regValue |= (pLayerCfg->InputAlpha & DMA2D_BGPFCCR_ALPHA); - } - else - { - regValue |= (pLayerCfg->InputAlpha << DMA2D_BGPFCCR_ALPHA_Pos); - } - - /* Configure the background DMA2D layer */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Write DMA2D BGPFCCR register */ - MODIFY_REG(hdma2d->Instance->BGPFCCR, regMask, regValue); - - /* DMA2D BGOR register configuration -------------------------------------*/ - WRITE_REG(hdma2d->Instance->BGOR, pLayerCfg->InputOffset); - - /* DMA2D BGCOLR register configuration -------------------------------------*/ - if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) - { - WRITE_REG(hdma2d->Instance->BGCOLR, pLayerCfg->InputAlpha & (DMA2D_BGCOLR_BLUE | DMA2D_BGCOLR_GREEN | \ - DMA2D_BGCOLR_RED)); - } - } - /* Configure the foreground DMA2D layer */ - else - { - - - /* Write DMA2D FGPFCCR register */ - MODIFY_REG(hdma2d->Instance->FGPFCCR, regMask, regValue); - - /* DMA2D FGOR register configuration -------------------------------------*/ - WRITE_REG(hdma2d->Instance->FGOR, pLayerCfg->InputOffset); - - /* DMA2D FGCOLR register configuration -------------------------------------*/ - if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) - { - WRITE_REG(hdma2d->Instance->FGCOLR, pLayerCfg->InputAlpha & (DMA2D_FGCOLR_BLUE | DMA2D_FGCOLR_GREEN | \ - DMA2D_FGCOLR_RED)); - } - } - /* Initialize the DMA2D state*/ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @brief Configure the DMA2D CLUT Transfer. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains - * the configuration information for the color look up table. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) - * @note API obsolete and maintained for compatibility with legacy. User is invited - * to resort to HAL_DMA2D_CLUTStartLoad() instead to benefit from code compactness, - * code size and improved heap usage. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_DMA2D_LAYER(LayerIdx)); - assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); - assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); - - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Configure the CLUT of the background DMA2D layer */ - if (LayerIdx == DMA2D_BACKGROUND_LAYER) - { - /* Write background CLUT memory address */ - WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); - - /* Write background CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), - ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); - } - /* Configure the CLUT of the foreground DMA2D layer */ - else - { - /* Write foreground CLUT memory address */ - WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); - - /* Write foreground CLUT size and CLUT color mode */ - MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), - ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); - } - - /* Set the DMA2D state to Ready*/ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - - -/** - * @brief Configure the line watermark. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @param Line Line Watermark configuration (maximum 16-bit long value expected). - * @note HAL_DMA2D_ProgramLineEvent() API enables the transfer watermark interrupt. - * @note The transfer watermark interrupt is disabled once it has occurred. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line) -{ - /* Check the parameters */ - if (Line > DMA2D_LWR_LW) - { - return HAL_ERROR; - } - else - { - /* Process locked */ - __HAL_LOCK(hdma2d); - - /* Change DMA2D peripheral state */ - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Sets the Line watermark configuration */ - WRITE_REG(hdma2d->Instance->LWR, Line); - - /* Enable the Line interrupt */ - __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TW); - - /* Initialize the DMA2D state*/ - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; - } -} - -/** - * @brief Enable DMA2D dead time feature. - * @param hdma2d DMA2D handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d) -{ - /* Process Locked */ - __HAL_LOCK(hdma2d); - - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Set DMA2D_AMTCR EN bit */ - SET_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN); - - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @brief Disable DMA2D dead time feature. - * @param hdma2d DMA2D handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d) -{ - /* Process Locked */ - __HAL_LOCK(hdma2d); - - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Clear DMA2D_AMTCR EN bit */ - CLEAR_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN); - - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @brief Configure dead time. - * @note The dead time value represents the guaranteed minimum number of cycles between - * two consecutive transactions on the AHB bus. - * @param hdma2d DMA2D handle. - * @param DeadTime dead time value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime) -{ - /* Process Locked */ - __HAL_LOCK(hdma2d); - - hdma2d->State = HAL_DMA2D_STATE_BUSY; - - /* Set DMA2D_AMTCR DT field */ - MODIFY_REG(hdma2d->Instance->AMTCR, DMA2D_AMTCR_DT, (((uint32_t) DeadTime) << DMA2D_AMTCR_DT_Pos)); - - hdma2d->State = HAL_DMA2D_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma2d); - - return HAL_OK; -} - -/** - * @} - */ - - -/** @defgroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to: - (+) Get the DMA2D state - (+) Get the DMA2D error code - -@endverbatim - * @{ - */ - -/** - * @brief Return the DMA2D state - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the DMA2D. - * @retval HAL state - */ -HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d) -{ - return hdma2d->State; -} - -/** - * @brief Return the DMA2D error code - * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for DMA2D. - * @retval DMA2D Error Code - */ -uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d) -{ - return hdma2d->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - - -/** @defgroup DMA2D_Private_Functions DMA2D Private Functions - * @{ - */ - -/** - * @brief Set the DMA2D transfer parameters. - * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains - * the configuration information for the specified DMA2D. - * @param pdata The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param Width The width of data to be transferred from source to destination. - * @param Height The height of data to be transferred from source to destination. - * @retval HAL status - */ -static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, - uint32_t Height) -{ - uint32_t tmp; - uint32_t tmp1; - uint32_t tmp2; - uint32_t tmp3; - uint32_t tmp4; - - /* Configure DMA2D data size */ - MODIFY_REG(hdma2d->Instance->NLR, (DMA2D_NLR_NL | DMA2D_NLR_PL), (Height | (Width << DMA2D_NLR_PL_Pos))); - - /* Configure DMA2D destination address */ - WRITE_REG(hdma2d->Instance->OMAR, DstAddress); - - /* Register to memory DMA2D mode selected */ - if (hdma2d->Init.Mode == DMA2D_R2M) - { - tmp1 = pdata & DMA2D_OCOLR_ALPHA_1; - tmp2 = pdata & DMA2D_OCOLR_RED_1; - tmp3 = pdata & DMA2D_OCOLR_GREEN_1; - tmp4 = pdata & DMA2D_OCOLR_BLUE_1; - - /* Prepare the value to be written to the OCOLR register according to the color mode */ - if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB8888) - { - tmp = (tmp3 | tmp2 | tmp1 | tmp4); - } - else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB888) - { - tmp = (tmp3 | tmp2 | tmp4); - } - else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB565) - { - tmp2 = (tmp2 >> 19U); - tmp3 = (tmp3 >> 10U); - tmp4 = (tmp4 >> 3U); - tmp = ((tmp3 << 5U) | (tmp2 << 11U) | tmp4); - } - else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB1555) - { - tmp1 = (tmp1 >> 31U); - tmp2 = (tmp2 >> 19U); - tmp3 = (tmp3 >> 11U); - tmp4 = (tmp4 >> 3U); - tmp = ((tmp3 << 5U) | (tmp2 << 10U) | (tmp1 << 15U) | tmp4); - } - else /* Dhdma2d->Init.ColorMode = DMA2D_OUTPUT_ARGB4444 */ - { - tmp1 = (tmp1 >> 28U); - tmp2 = (tmp2 >> 20U); - tmp3 = (tmp3 >> 12U); - tmp4 = (tmp4 >> 4U); - tmp = ((tmp3 << 4U) | (tmp2 << 8U) | (tmp1 << 12U) | tmp4); - } - /* Write to DMA2D OCOLR register */ - WRITE_REG(hdma2d->Instance->OCOLR, tmp); - } - else /* M2M, M2M_PFC or M2M_Blending DMA2D Mode */ - { - /* Configure DMA2D source address */ - WRITE_REG(hdma2d->Instance->FGMAR, pdata); - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* DMA2D */ -#endif /* HAL_DMA2D_MODULE_ENABLED */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c deleted file mode 100644 index 7167e77..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c +++ /dev/null @@ -1,313 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.c - * @author MCD Application Team - * @brief DMA Extension HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the DMA Extension peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The DMA Extension HAL driver can be used as follows: - (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function - for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. - - -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. - -@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default. - -@- In Multi (Double) buffer mode, it is possible to update the base address for - the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMAEx DMAEx - * @brief DMA Extended HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private Constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMAEx_Private_Functions - * @{ - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @addtogroup DMAEx_Exported_Functions - * @{ - */ - - -/** @addtogroup DMAEx_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer with interrupt - (+) Change on the fly the memory0 or memory1 address. - -@endverbatim - * @{ - */ - - -/** - * @brief Starts the multi_buffer DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - status = HAL_ERROR; - } - else - { - /* Process Locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Enable the double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Return error status */ - status = HAL_BUSY; - } - } - return status; -} - -/** - * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Check callback functions */ - if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback)) - { - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Enable the Double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all flags */ - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)); - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - hdma->Instance->FCR |= DMA_IT_FE; - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Change the memory0 or memory1 address on the fly. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param Address The new address - * @param memory the memory to be changed, This parameter can be one of - * the following values: - * MEMORY0 / - * MEMORY1 - * @note The MEMORY0 address can be changed only when the current transfer use - * MEMORY1 and the MEMORY1 address can be changed only when the current - * transfer use MEMORY0. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) -{ - if(memory == MEMORY0) - { - /* change the memory0 address */ - hdma->Instance->M0AR = Address; - } - else - { - /* change the memory1 address */ - hdma->Instance->M1AR = Address; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMAEx_Private_Functions - * @{ - */ - -/** - * @brief Set the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Peripheral to Memory */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Memory to Peripheral */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dsi.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dsi.c deleted file mode 100644 index bde6861..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dsi.c +++ /dev/null @@ -1,2760 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dsi.c - * @author MCD Application Team - * @brief DSI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the DSI peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The DSI HAL driver can be used as follows: - - (#) Declare a DSI_HandleTypeDef handle structure, for example: DSI_HandleTypeDef hdsi; - - (#) Initialize the DSI low level resources by implementing the HAL_DSI_MspInit() API: - (##) Enable the DSI interface clock - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the DSI interrupt priority - (+++) Enable the NVIC DSI IRQ Channel - - (#) Initialize the DSI Host peripheral, the required PLL parameters, number of lances and - TX Escape clock divider by calling the HAL_DSI_Init() API which calls HAL_DSI_MspInit(). - - *** Configuration *** - ========================= - [..] - (#) Use HAL_DSI_ConfigAdaptedCommandMode() function to configure the DSI host in adapted - command mode. - - (#) When operating in video mode , use HAL_DSI_ConfigVideoMode() to configure the DSI host. - - (#) Function HAL_DSI_ConfigCommand() is used to configure the DSI commands behavior in low power mode. - - (#) To configure the DSI PHY timings parameters, use function HAL_DSI_ConfigPhyTimer(). - - (#) The DSI Host can be started/stopped using respectively functions HAL_DSI_Start() and HAL_DSI_Stop(). - Functions HAL_DSI_ShortWrite(), HAL_DSI_LongWrite() and HAL_DSI_Read() allows respectively - to write DSI short packets, long packets and to read DSI packets. - - (#) The DSI Host Offers two Low power modes : - (++) Low Power Mode on data lanes only: Only DSI data lanes are shut down. - It is possible to enter/exit from this mode using respectively functions HAL_DSI_EnterULPMData() - and HAL_DSI_ExitULPMData() - - (++) Low Power Mode on data and clock lanes : All DSI lanes are shut down including data and clock lanes. - It is possible to enter/exit from this mode using respectively functions HAL_DSI_EnterULPM() - and HAL_DSI_ExitULPM() - - (#) To control DSI state you can use the following function: HAL_DSI_GetState() - - *** Error management *** - ======================== - [..] - (#) User can select the DSI errors to be reported/monitored using function HAL_DSI_ConfigErrorMonitor() - When an error occurs, the callback HAL_DSI_ErrorCallback() is asserted and then user can retrieve - the error code by calling function HAL_DSI_GetError() - - *** DSI HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DSI HAL driver. - - (+) __HAL_DSI_ENABLE: Enable the DSI Host. - (+) __HAL_DSI_DISABLE: Disable the DSI Host. - (+) __HAL_DSI_WRAPPER_ENABLE: Enables the DSI wrapper. - (+) __HAL_DSI_WRAPPER_DISABLE: Disable the DSI wrapper. - (+) __HAL_DSI_PLL_ENABLE: Enables the DSI PLL. - (+) __HAL_DSI_PLL_DISABLE: Disables the DSI PLL. - (+) __HAL_DSI_REG_ENABLE: Enables the DSI regulator. - (+) __HAL_DSI_REG_DISABLE: Disables the DSI regulator. - (+) __HAL_DSI_GET_FLAG: Get the DSI pending flags. - (+) __HAL_DSI_CLEAR_FLAG: Clears the DSI pending flags. - (+) __HAL_DSI_ENABLE_IT: Enables the specified DSI interrupts. - (+) __HAL_DSI_DISABLE_IT: Disables the specified DSI interrupts. - (+) __HAL_DSI_GET_IT_SOURCE: Checks whether the specified DSI interrupt source is enabled or not. - - [..] - (@) You can refer to the DSI HAL driver header file for more useful macros - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_DSI_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Function HAL_DSI_RegisterCallback() to register a callback. - - [..] - Function HAL_DSI_RegisterCallback() allows to register following callbacks: - (+) TearingEffectCallback : DSI Tearing Effect Callback. - (+) EndOfRefreshCallback : DSI End Of Refresh Callback. - (+) ErrorCallback : DSI Error Callback - (+) MspInitCallback : DSI MspInit. - (+) MspDeInitCallback : DSI MspDeInit. - [..] - This function takes as parameters the HAL peripheral handle, the callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_DSI_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_DSI_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the callback ID. - [..] - This function allows to reset following callbacks: - (+) TearingEffectCallback : DSI Tearing Effect Callback. - (+) EndOfRefreshCallback : DSI End Of Refresh Callback. - (+) ErrorCallback : DSI Error Callback - (+) MspInitCallback : DSI MspInit. - (+) MspDeInitCallback : DSI MspDeInit. - - [..] - By default, after the HAL_DSI_Init and when the state is HAL_DSI_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_DSI_TearingEffectCallback(), HAL_DSI_EndOfRefreshCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_DSI_Init() - and HAL_DSI_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_DSI_Init() and HAL_DSI_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_DSI_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_DSI_STATE_READY or HAL_DSI_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_DSI_RegisterCallback() before calling HAL_DSI_DeInit() - or HAL_DSI_Init() function. - - [..] - When The compilation define USE_HAL_DSI_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_DSI_MODULE_ENABLED - -#if defined(DSI) - -/** @addtogroup DSI - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @addtogroup DSI_Private_Constants - * @{ - */ -#define DSI_TIMEOUT_VALUE ((uint32_t)1000U) /* 1s */ - -#define DSI_ERROR_ACK_MASK (DSI_ISR0_AE0 | DSI_ISR0_AE1 | DSI_ISR0_AE2 | DSI_ISR0_AE3 | \ - DSI_ISR0_AE4 | DSI_ISR0_AE5 | DSI_ISR0_AE6 | DSI_ISR0_AE7 | \ - DSI_ISR0_AE8 | DSI_ISR0_AE9 | DSI_ISR0_AE10 | DSI_ISR0_AE11 | \ - DSI_ISR0_AE12 | DSI_ISR0_AE13 | DSI_ISR0_AE14 | DSI_ISR0_AE15) -#define DSI_ERROR_PHY_MASK (DSI_ISR0_PE0 | DSI_ISR0_PE1 | DSI_ISR0_PE2 | DSI_ISR0_PE3 | DSI_ISR0_PE4) -#define DSI_ERROR_TX_MASK DSI_ISR1_TOHSTX -#define DSI_ERROR_RX_MASK DSI_ISR1_TOLPRX -#define DSI_ERROR_ECC_MASK (DSI_ISR1_ECCSE | DSI_ISR1_ECCME) -#define DSI_ERROR_CRC_MASK DSI_ISR1_CRCE -#define DSI_ERROR_PSE_MASK DSI_ISR1_PSE -#define DSI_ERROR_EOT_MASK DSI_ISR1_EOTPE -#define DSI_ERROR_OVF_MASK DSI_ISR1_LPWRE -#define DSI_ERROR_GEN_MASK (DSI_ISR1_GCWRE | DSI_ISR1_GPWRE | DSI_ISR1_GPTXE | DSI_ISR1_GPRDE | DSI_ISR1_GPRXE) -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, uint32_t ChannelID, uint32_t DataType, uint32_t Data0, - uint32_t Data1); - -static HAL_StatusTypeDef DSI_ShortWrite(DSI_HandleTypeDef *hdsi, - uint32_t ChannelID, - uint32_t Mode, - uint32_t Param1, - uint32_t Param2); -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DSI_Private_Functions DSI Private Functions - * @{ - */ -/** - * @brief Generic DSI packet header configuration - * @param DSIx Pointer to DSI register base - * @param ChannelID Virtual channel ID of the header packet - * @param DataType Packet data type of the header packet - * This parameter can be any value of : - * @arg DSI_SHORT_WRITE_PKT_Data_Type - * @arg DSI_LONG_WRITE_PKT_Data_Type - * @arg DSI_SHORT_READ_PKT_Data_Type - * @arg DSI_MAX_RETURN_PKT_SIZE - * @param Data0 Word count LSB - * @param Data1 Word count MSB - * @retval None - */ -static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, - uint32_t ChannelID, - uint32_t DataType, - uint32_t Data0, - uint32_t Data1) -{ - /* Update the DSI packet header with new information */ - DSIx->GHCR = (DataType | (ChannelID << 6U) | (Data0 << 8U) | (Data1 << 16U)); -} - -/** - * @brief write short DCS or short Generic command - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param ChannelID Virtual channel ID. - * @param Mode DSI short packet data type. - * This parameter can be any value of @arg DSI_SHORT_WRITE_PKT_Data_Type. - * @param Param1 DSC command or first generic parameter. - * This parameter can be any value of @arg DSI_DCS_Command or a - * generic command code. - * @param Param2 DSC parameter or second generic parameter. - * @retval HAL status - */ -static HAL_StatusTypeDef DSI_ShortWrite(DSI_HandleTypeDef *hdsi, - uint32_t ChannelID, - uint32_t Mode, - uint32_t Param1, - uint32_t Param2) -{ - uint32_t tickstart; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for Command FIFO Empty */ - while ((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the packet to send a short DCS command with 0 or 1 parameter */ - /* Update the DSI packet header with new information */ - hdsi->Instance->GHCR = (Mode | (ChannelID << 6U) | (Param1 << 8U) | (Param2 << 16U)); - - return HAL_OK; -} - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DSI_Exported_Functions - * @{ - */ - -/** @defgroup DSI_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the DSI - (+) De-initialize the DSI - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the DSI according to the specified - * parameters in the DSI_InitTypeDef and create the associated handle. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param PLLInit pointer to a DSI_PLLInitTypeDef structure that contains - * the PLL Clock structure definition for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit) -{ - uint32_t tickstart; - uint32_t unitIntervalx4; - uint32_t tempIDF; - - /* Check the DSI handle allocation */ - if (hdsi == NULL) - { - return HAL_ERROR; - } - - /* Check function parameters */ - assert_param(IS_DSI_PLL_NDIV(PLLInit->PLLNDIV)); - assert_param(IS_DSI_PLL_IDF(PLLInit->PLLIDF)); - assert_param(IS_DSI_PLL_ODF(PLLInit->PLLODF)); - assert_param(IS_DSI_AUTO_CLKLANE_CONTROL(hdsi->Init.AutomaticClockLaneControl)); - assert_param(IS_DSI_NUMBER_OF_LANES(hdsi->Init.NumberOfLanes)); - -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) - if (hdsi->State == HAL_DSI_STATE_RESET) - { - /* Reset the DSI callback to the legacy weak callbacks */ - hdsi->TearingEffectCallback = HAL_DSI_TearingEffectCallback; /* Legacy weak TearingEffectCallback */ - hdsi->EndOfRefreshCallback = HAL_DSI_EndOfRefreshCallback; /* Legacy weak EndOfRefreshCallback */ - hdsi->ErrorCallback = HAL_DSI_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hdsi->MspInitCallback == NULL) - { - hdsi->MspInitCallback = HAL_DSI_MspInit; - } - /* Initialize the low level hardware */ - hdsi->MspInitCallback(hdsi); - } -#else - if (hdsi->State == HAL_DSI_STATE_RESET) - { - /* Initialize the low level hardware */ - HAL_DSI_MspInit(hdsi); - } -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - - /* Change DSI peripheral state */ - hdsi->State = HAL_DSI_STATE_BUSY; - - /**************** Turn on the regulator and enable the DSI PLL ****************/ - - /* Enable the regulator */ - __HAL_DSI_REG_ENABLE(hdsi); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until the regulator is ready */ - while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_RRS) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set the PLL division factors */ - hdsi->Instance->WRPCR &= ~(DSI_WRPCR_PLL_NDIV | DSI_WRPCR_PLL_IDF | DSI_WRPCR_PLL_ODF); - hdsi->Instance->WRPCR |= (((PLLInit->PLLNDIV) << DSI_WRPCR_PLL_NDIV_Pos) | \ - ((PLLInit->PLLIDF) << DSI_WRPCR_PLL_IDF_Pos) | \ - ((PLLInit->PLLODF) << DSI_WRPCR_PLL_ODF_Pos)); - - /* Enable the DSI PLL */ - __HAL_DSI_PLL_ENABLE(hdsi); - - /* Requires min of 400us delay before reading the PLLLS flag */ - /* 1ms delay is inserted that is the minimum HAL delay granularity */ - HAL_Delay(1); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for the lock of the PLL */ - while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /*************************** Set the PHY parameters ***************************/ - - /* D-PHY clock and digital enable*/ - hdsi->Instance->PCTLR |= (DSI_PCTLR_CKE | DSI_PCTLR_DEN); - - /* Clock lane configuration */ - hdsi->Instance->CLCR &= ~(DSI_CLCR_DPCC | DSI_CLCR_ACR); - hdsi->Instance->CLCR |= (DSI_CLCR_DPCC | hdsi->Init.AutomaticClockLaneControl); - - /* Configure the number of active data lanes */ - hdsi->Instance->PCONFR &= ~DSI_PCONFR_NL; - hdsi->Instance->PCONFR |= hdsi->Init.NumberOfLanes; - - /************************ Set the DSI clock parameters ************************/ - - /* Set the TX escape clock division factor */ - hdsi->Instance->CCR &= ~DSI_CCR_TXECKDIV; - hdsi->Instance->CCR |= hdsi->Init.TXEscapeCkdiv; - - /* Calculate the bit period in high-speed mode in unit of 0.25 ns (UIX4) */ - /* The equation is : UIX4 = IntegerPart( (1000/F_PHY_Mhz) * 4 ) */ - /* Where : F_PHY_Mhz = (NDIV * HSE_Mhz) / (IDF * ODF) */ - tempIDF = (PLLInit->PLLIDF > 0U) ? PLLInit->PLLIDF : 1U; - unitIntervalx4 = (4000000U * tempIDF * ((1UL << (0x3U & PLLInit->PLLODF)))) / ((HSE_VALUE / 1000U) * PLLInit->PLLNDIV); - - /* Set the bit period in high-speed mode */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_UIX4; - hdsi->Instance->WPCR[0U] |= unitIntervalx4; - - /****************************** Error management *****************************/ - - /* Disable all error interrupts and reset the Error Mask */ - hdsi->Instance->IER[0U] = 0U; - hdsi->Instance->IER[1U] = 0U; - hdsi->ErrorMsk = 0U; - - /* Initialize the error code */ - hdsi->ErrorCode = HAL_DSI_ERROR_NONE; - - /* Initialize the DSI state*/ - hdsi->State = HAL_DSI_STATE_READY; - - return HAL_OK; -} - -/** - * @brief De-initializes the DSI peripheral registers to their default reset - * values. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi) -{ - /* Check the DSI handle allocation */ - if (hdsi == NULL) - { - return HAL_ERROR; - } - - /* Change DSI peripheral state */ - hdsi->State = HAL_DSI_STATE_BUSY; - - /* Disable the DSI wrapper */ - __HAL_DSI_WRAPPER_DISABLE(hdsi); - - /* Disable the DSI host */ - __HAL_DSI_DISABLE(hdsi); - - /* D-PHY clock and digital disable */ - hdsi->Instance->PCTLR &= ~(DSI_PCTLR_CKE | DSI_PCTLR_DEN); - - /* Turn off the DSI PLL */ - __HAL_DSI_PLL_DISABLE(hdsi); - - /* Disable the regulator */ - __HAL_DSI_REG_DISABLE(hdsi); - -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) - if (hdsi->MspDeInitCallback == NULL) - { - hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; - } - /* DeInit the low level hardware */ - hdsi->MspDeInitCallback(hdsi); -#else - /* DeInit the low level hardware */ - HAL_DSI_MspDeInit(hdsi); -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - - /* Initialize the error code */ - hdsi->ErrorCode = HAL_DSI_ERROR_NONE; - - /* Initialize the DSI state*/ - hdsi->State = HAL_DSI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Enable the error monitor flags - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param ActiveErrors indicates which error interrupts will be enabled. - * This parameter can be any combination of @arg DSI_Error_Data_Type. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - hdsi->Instance->IER[0U] = 0U; - hdsi->Instance->IER[1U] = 0U; - - /* Store active errors to the handle */ - hdsi->ErrorMsk = ActiveErrors; - - if ((ActiveErrors & HAL_DSI_ERROR_ACK) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[0U] |= DSI_ERROR_ACK_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_PHY) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[0U] |= DSI_ERROR_PHY_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_TX) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_TX_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_RX) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_RX_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_ECC) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_ECC_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_CRC) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_CRC_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_PSE) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_PSE_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_EOT) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_EOT_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_OVF) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_OVF_MASK; - } - - if ((ActiveErrors & HAL_DSI_ERROR_GEN) != 0U) - { - /* Enable the interrupt generation on selected errors */ - hdsi->Instance->IER[1U] |= DSI_ERROR_GEN_MASK; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Initializes the DSI MSP. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval None - */ -__weak void HAL_DSI_MspInit(DSI_HandleTypeDef *hdsi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdsi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DSI_MspInit could be implemented in the user file - */ -} - -/** - * @brief De-initializes the DSI MSP. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval None - */ -__weak void HAL_DSI_MspDeInit(DSI_HandleTypeDef *hdsi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdsi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DSI_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User DSI Callback - * To be used instead of the weak predefined callback - * @param hdsi dsi handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg HAL_DSI_TEARING_EFFECT_CB_ID Tearing Effect Callback ID - * @arg HAL_DSI_ENDOF_REFRESH_CB_ID End Of Refresh Callback ID - * @arg HAL_DSI_ERROR_CB_ID Error Callback ID - * @arg HAL_DSI_MSPINIT_CB_ID MspInit callback ID - * @arg HAL_DSI_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_DSI_RegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID, - pDSI_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hdsi); - - if (hdsi->State == HAL_DSI_STATE_READY) - { - switch (CallbackID) - { - case HAL_DSI_TEARING_EFFECT_CB_ID : - hdsi->TearingEffectCallback = pCallback; - break; - - case HAL_DSI_ENDOF_REFRESH_CB_ID : - hdsi->EndOfRefreshCallback = pCallback; - break; - - case HAL_DSI_ERROR_CB_ID : - hdsi->ErrorCallback = pCallback; - break; - - case HAL_DSI_MSPINIT_CB_ID : - hdsi->MspInitCallback = pCallback; - break; - - case HAL_DSI_MSPDEINIT_CB_ID : - hdsi->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hdsi->State == HAL_DSI_STATE_RESET) - { - switch (CallbackID) - { - case HAL_DSI_MSPINIT_CB_ID : - hdsi->MspInitCallback = pCallback; - break; - - case HAL_DSI_MSPDEINIT_CB_ID : - hdsi->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdsi); - - return status; -} - -/** - * @brief Unregister a DSI Callback - * DSI callback is redirected to the weak predefined callback - * @param hdsi dsi handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg HAL_DSI_TEARING_EFFECT_CB_ID Tearing Effect Callback ID - * @arg HAL_DSI_ENDOF_REFRESH_CB_ID End Of Refresh Callback ID - * @arg HAL_DSI_ERROR_CB_ID Error Callback ID - * @arg HAL_DSI_MSPINIT_CB_ID MspInit callback ID - * @arg HAL_DSI_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_DSI_UnRegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdsi); - - if (hdsi->State == HAL_DSI_STATE_READY) - { - switch (CallbackID) - { - case HAL_DSI_TEARING_EFFECT_CB_ID : - hdsi->TearingEffectCallback = HAL_DSI_TearingEffectCallback; /* Legacy weak TearingEffectCallback */ - break; - - case HAL_DSI_ENDOF_REFRESH_CB_ID : - hdsi->EndOfRefreshCallback = HAL_DSI_EndOfRefreshCallback; /* Legacy weak EndOfRefreshCallback */ - break; - - case HAL_DSI_ERROR_CB_ID : - hdsi->ErrorCallback = HAL_DSI_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_DSI_MSPINIT_CB_ID : - hdsi->MspInitCallback = HAL_DSI_MspInit; /* Legacy weak MspInit Callback */ - break; - - case HAL_DSI_MSPDEINIT_CB_ID : - hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; /* Legacy weak MspDeInit Callback */ - break; - - default : - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hdsi->State == HAL_DSI_STATE_RESET) - { - switch (CallbackID) - { - case HAL_DSI_MSPINIT_CB_ID : - hdsi->MspInitCallback = HAL_DSI_MspInit; /* Legacy weak MspInit Callback */ - break; - - case HAL_DSI_MSPDEINIT_CB_ID : - hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; /* Legacy weak MspDeInit Callback */ - break; - - default : - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdsi); - - return status; -} -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup DSI_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides function allowing to: - (+) Handle DSI interrupt request - -@endverbatim - * @{ - */ -/** - * @brief Handles DSI interrupt request. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi) -{ - uint32_t ErrorStatus0; - uint32_t ErrorStatus1; - - /* Tearing Effect Interrupt management ***************************************/ - if (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_TE) != 0U) - { - if (__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_TE) != 0U) - { - /* Clear the Tearing Effect Interrupt Flag */ - __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_TE); - - /* Tearing Effect Callback */ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) - /*Call registered Tearing Effect callback */ - hdsi->TearingEffectCallback(hdsi); -#else - /*Call legacy Tearing Effect callback*/ - HAL_DSI_TearingEffectCallback(hdsi); -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - } - } - - /* End of Refresh Interrupt management ***************************************/ - if (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_ER) != 0U) - { - if (__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_ER) != 0U) - { - /* Clear the End of Refresh Interrupt Flag */ - __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_ER); - - /* End of Refresh Callback */ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) - /*Call registered End of refresh callback */ - hdsi->EndOfRefreshCallback(hdsi); -#else - /*Call Legacy End of refresh callback */ - HAL_DSI_EndOfRefreshCallback(hdsi); -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - } - } - - /* Error Interrupts management ***********************************************/ - if (hdsi->ErrorMsk != 0U) - { - ErrorStatus0 = hdsi->Instance->ISR[0U]; - ErrorStatus0 &= hdsi->Instance->IER[0U]; - ErrorStatus1 = hdsi->Instance->ISR[1U]; - ErrorStatus1 &= hdsi->Instance->IER[1U]; - - if ((ErrorStatus0 & DSI_ERROR_ACK_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_ACK; - } - - if ((ErrorStatus0 & DSI_ERROR_PHY_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_PHY; - } - - if ((ErrorStatus1 & DSI_ERROR_TX_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_TX; - } - - if ((ErrorStatus1 & DSI_ERROR_RX_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_RX; - } - - if ((ErrorStatus1 & DSI_ERROR_ECC_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_ECC; - } - - if ((ErrorStatus1 & DSI_ERROR_CRC_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_CRC; - } - - if ((ErrorStatus1 & DSI_ERROR_PSE_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_PSE; - } - - if ((ErrorStatus1 & DSI_ERROR_EOT_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_EOT; - } - - if ((ErrorStatus1 & DSI_ERROR_OVF_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_OVF; - } - - if ((ErrorStatus1 & DSI_ERROR_GEN_MASK) != 0U) - { - hdsi->ErrorCode |= HAL_DSI_ERROR_GEN; - } - - /* Check only selected errors */ - if (hdsi->ErrorCode != HAL_DSI_ERROR_NONE) - { - /* DSI error interrupt callback */ -#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) - /*Call registered Error callback */ - hdsi->ErrorCallback(hdsi); -#else - /*Call Legacy Error callback */ - HAL_DSI_ErrorCallback(hdsi); -#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Tearing Effect DSI callback. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval None - */ -__weak void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdsi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DSI_TearingEffectCallback could be implemented in the user file - */ -} - -/** - * @brief End of Refresh DSI callback. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval None - */ -__weak void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdsi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DSI_EndOfRefreshCallback could be implemented in the user file - */ -} - -/** - * @brief Operation Error DSI callback. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval None - */ -__weak void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdsi); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_DSI_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup DSI_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the Generic interface read-back Virtual Channel ID - (+) Select video mode and configure the corresponding parameters - (+) Configure command transmission mode: High-speed or Low-power - (+) Configure the flow control - (+) Configure the DSI PHY timer - (+) Configure the DSI HOST timeout - (+) Configure the DSI HOST timeout - (+) Start/Stop the DSI module - (+) Refresh the display in command mode - (+) Controls the display color mode in Video mode - (+) Control the display shutdown in Video mode - (+) write short DCS or short Generic command - (+) write long DCS or long Generic command - (+) Read command (DCS or generic) - (+) Enter/Exit the Ultra Low Power Mode on data only (D-PHY PLL running) - (+) Enter/Exit the Ultra Low Power Mode on data only and clock (D-PHY PLL turned off) - (+) Start/Stop test pattern generation - (+) Slew-Rate And Delay Tuning - (+) Low-Power Reception Filter Tuning - (+) Activate an additional current path on all lanes to meet the SDDTx parameter - (+) Custom lane pins configuration - (+) Set custom timing for the PHY - (+) Force the Clock/Data Lane in TX Stop Mode - (+) Force LP Receiver in Low-Power Mode - (+) Force Data Lanes in RX Mode after a BTA - (+) Enable a pull-down on the lanes to prevent from floating states when unused - (+) Switch off the contention detection on data lanes - -@endverbatim - * @{ - */ - -/** - * @brief Configure the Generic interface read-back Virtual Channel ID. - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param VirtualChannelID Virtual channel ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Update the GVCID register */ - hdsi->Instance->GVCIDR &= ~DSI_GVCIDR_VCID; - hdsi->Instance->GVCIDR |= VirtualChannelID; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Select video mode and configure the corresponding parameters - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains - * the DSI video mode configuration parameters - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_COLOR_CODING(VidCfg->ColorCoding)); - assert_param(IS_DSI_VIDEO_MODE_TYPE(VidCfg->Mode)); - assert_param(IS_DSI_LP_COMMAND(VidCfg->LPCommandEnable)); - assert_param(IS_DSI_LP_HFP(VidCfg->LPHorizontalFrontPorchEnable)); - assert_param(IS_DSI_LP_HBP(VidCfg->LPHorizontalBackPorchEnable)); - assert_param(IS_DSI_LP_VACTIVE(VidCfg->LPVerticalActiveEnable)); - assert_param(IS_DSI_LP_VFP(VidCfg->LPVerticalFrontPorchEnable)); - assert_param(IS_DSI_LP_VBP(VidCfg->LPVerticalBackPorchEnable)); - assert_param(IS_DSI_LP_VSYNC(VidCfg->LPVerticalSyncActiveEnable)); - assert_param(IS_DSI_FBTAA(VidCfg->FrameBTAAcknowledgeEnable)); - assert_param(IS_DSI_DE_POLARITY(VidCfg->DEPolarity)); - assert_param(IS_DSI_VSYNC_POLARITY(VidCfg->VSPolarity)); - assert_param(IS_DSI_HSYNC_POLARITY(VidCfg->HSPolarity)); - /* Check the LooselyPacked variant only in 18-bit mode */ - if (VidCfg->ColorCoding == DSI_RGB666) - { - assert_param(IS_DSI_LOOSELY_PACKED(VidCfg->LooselyPacked)); - } - - /* Select video mode by resetting CMDM and DSIM bits */ - hdsi->Instance->MCR &= ~DSI_MCR_CMDM; - hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM; - - /* Configure the video mode transmission type */ - hdsi->Instance->VMCR &= ~DSI_VMCR_VMT; - hdsi->Instance->VMCR |= VidCfg->Mode; - - /* Configure the video packet size */ - hdsi->Instance->VPCR &= ~DSI_VPCR_VPSIZE; - hdsi->Instance->VPCR |= VidCfg->PacketSize; - - /* Set the chunks number to be transmitted through the DSI link */ - hdsi->Instance->VCCR &= ~DSI_VCCR_NUMC; - hdsi->Instance->VCCR |= VidCfg->NumberOfChunks; - - /* Set the size of the null packet */ - hdsi->Instance->VNPCR &= ~DSI_VNPCR_NPSIZE; - hdsi->Instance->VNPCR |= VidCfg->NullPacketSize; - - /* Select the virtual channel for the LTDC interface traffic */ - hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID; - hdsi->Instance->LVCIDR |= VidCfg->VirtualChannelID; - - /* Configure the polarity of control signals */ - hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP); - hdsi->Instance->LPCR |= (VidCfg->DEPolarity | VidCfg->VSPolarity | VidCfg->HSPolarity); - - /* Select the color coding for the host */ - hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC; - hdsi->Instance->LCOLCR |= VidCfg->ColorCoding; - - /* Select the color coding for the wrapper */ - hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX; - hdsi->Instance->WCFGR |= ((VidCfg->ColorCoding) << 1U); - - /* Enable/disable the loosely packed variant to 18-bit configuration */ - if (VidCfg->ColorCoding == DSI_RGB666) - { - hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_LPE; - hdsi->Instance->LCOLCR |= VidCfg->LooselyPacked; - } - - /* Set the Horizontal Synchronization Active (HSA) in lane byte clock cycles */ - hdsi->Instance->VHSACR &= ~DSI_VHSACR_HSA; - hdsi->Instance->VHSACR |= VidCfg->HorizontalSyncActive; - - /* Set the Horizontal Back Porch (HBP) in lane byte clock cycles */ - hdsi->Instance->VHBPCR &= ~DSI_VHBPCR_HBP; - hdsi->Instance->VHBPCR |= VidCfg->HorizontalBackPorch; - - /* Set the total line time (HLINE=HSA+HBP+HACT+HFP) in lane byte clock cycles */ - hdsi->Instance->VLCR &= ~DSI_VLCR_HLINE; - hdsi->Instance->VLCR |= VidCfg->HorizontalLine; - - /* Set the Vertical Synchronization Active (VSA) */ - hdsi->Instance->VVSACR &= ~DSI_VVSACR_VSA; - hdsi->Instance->VVSACR |= VidCfg->VerticalSyncActive; - - /* Set the Vertical Back Porch (VBP)*/ - hdsi->Instance->VVBPCR &= ~DSI_VVBPCR_VBP; - hdsi->Instance->VVBPCR |= VidCfg->VerticalBackPorch; - - /* Set the Vertical Front Porch (VFP)*/ - hdsi->Instance->VVFPCR &= ~DSI_VVFPCR_VFP; - hdsi->Instance->VVFPCR |= VidCfg->VerticalFrontPorch; - - /* Set the Vertical Active period*/ - hdsi->Instance->VVACR &= ~DSI_VVACR_VA; - hdsi->Instance->VVACR |= VidCfg->VerticalActive; - - /* Configure the command transmission mode */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPCE; - hdsi->Instance->VMCR |= VidCfg->LPCommandEnable; - - /* Low power largest packet size */ - hdsi->Instance->LPMCR &= ~DSI_LPMCR_LPSIZE; - hdsi->Instance->LPMCR |= ((VidCfg->LPLargestPacketSize) << 16U); - - /* Low power VACT largest packet size */ - hdsi->Instance->LPMCR &= ~DSI_LPMCR_VLPSIZE; - hdsi->Instance->LPMCR |= VidCfg->LPVACTLargestPacketSize; - - /* Enable LP transition in HFP period */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPHFPE; - hdsi->Instance->VMCR |= VidCfg->LPHorizontalFrontPorchEnable; - - /* Enable LP transition in HBP period */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPHBPE; - hdsi->Instance->VMCR |= VidCfg->LPHorizontalBackPorchEnable; - - /* Enable LP transition in VACT period */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPVAE; - hdsi->Instance->VMCR |= VidCfg->LPVerticalActiveEnable; - - /* Enable LP transition in VFP period */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPVFPE; - hdsi->Instance->VMCR |= VidCfg->LPVerticalFrontPorchEnable; - - /* Enable LP transition in VBP period */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPVBPE; - hdsi->Instance->VMCR |= VidCfg->LPVerticalBackPorchEnable; - - /* Enable LP transition in vertical sync period */ - hdsi->Instance->VMCR &= ~DSI_VMCR_LPVSAE; - hdsi->Instance->VMCR |= VidCfg->LPVerticalSyncActiveEnable; - - /* Enable the request for an acknowledge response at the end of a frame */ - hdsi->Instance->VMCR &= ~DSI_VMCR_FBTAAE; - hdsi->Instance->VMCR |= VidCfg->FrameBTAAcknowledgeEnable; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Select adapted command mode and configure the corresponding parameters - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains - * the DSI command mode configuration parameters - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_COLOR_CODING(CmdCfg->ColorCoding)); - assert_param(IS_DSI_TE_SOURCE(CmdCfg->TearingEffectSource)); - assert_param(IS_DSI_TE_POLARITY(CmdCfg->TearingEffectPolarity)); - assert_param(IS_DSI_AUTOMATIC_REFRESH(CmdCfg->AutomaticRefresh)); - assert_param(IS_DSI_VS_POLARITY(CmdCfg->VSyncPol)); - assert_param(IS_DSI_TE_ACK_REQUEST(CmdCfg->TEAcknowledgeRequest)); - assert_param(IS_DSI_DE_POLARITY(CmdCfg->DEPolarity)); - assert_param(IS_DSI_VSYNC_POLARITY(CmdCfg->VSPolarity)); - assert_param(IS_DSI_HSYNC_POLARITY(CmdCfg->HSPolarity)); - - /* Select command mode by setting CMDM and DSIM bits */ - hdsi->Instance->MCR |= DSI_MCR_CMDM; - hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM; - hdsi->Instance->WCFGR |= DSI_WCFGR_DSIM; - - /* Select the virtual channel for the LTDC interface traffic */ - hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID; - hdsi->Instance->LVCIDR |= CmdCfg->VirtualChannelID; - - /* Configure the polarity of control signals */ - hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP); - hdsi->Instance->LPCR |= (CmdCfg->DEPolarity | CmdCfg->VSPolarity | CmdCfg->HSPolarity); - - /* Select the color coding for the host */ - hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC; - hdsi->Instance->LCOLCR |= CmdCfg->ColorCoding; - - /* Select the color coding for the wrapper */ - hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX; - hdsi->Instance->WCFGR |= ((CmdCfg->ColorCoding) << 1U); - - /* Configure the maximum allowed size for write memory command */ - hdsi->Instance->LCCR &= ~DSI_LCCR_CMDSIZE; - hdsi->Instance->LCCR |= CmdCfg->CommandSize; - - /* Configure the tearing effect source and polarity and select the refresh mode */ - hdsi->Instance->WCFGR &= ~(DSI_WCFGR_TESRC | DSI_WCFGR_TEPOL | DSI_WCFGR_AR | DSI_WCFGR_VSPOL); - hdsi->Instance->WCFGR |= (CmdCfg->TearingEffectSource | CmdCfg->TearingEffectPolarity | CmdCfg->AutomaticRefresh | - CmdCfg->VSyncPol); - - /* Configure the tearing effect acknowledge request */ - hdsi->Instance->CMCR &= ~DSI_CMCR_TEARE; - hdsi->Instance->CMCR |= CmdCfg->TEAcknowledgeRequest; - - /* Enable the Tearing Effect interrupt */ - __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_TE); - - /* Enable the End of Refresh interrupt */ - __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_ER); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Configure command transmission mode: High-speed or Low-power - * and enable/disable acknowledge request after packet transmission - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param LPCmd pointer to a DSI_LPCmdTypeDef structure that contains - * the DSI command transmission mode configuration parameters - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - assert_param(IS_DSI_LP_GSW0P(LPCmd->LPGenShortWriteNoP)); - assert_param(IS_DSI_LP_GSW1P(LPCmd->LPGenShortWriteOneP)); - assert_param(IS_DSI_LP_GSW2P(LPCmd->LPGenShortWriteTwoP)); - assert_param(IS_DSI_LP_GSR0P(LPCmd->LPGenShortReadNoP)); - assert_param(IS_DSI_LP_GSR1P(LPCmd->LPGenShortReadOneP)); - assert_param(IS_DSI_LP_GSR2P(LPCmd->LPGenShortReadTwoP)); - assert_param(IS_DSI_LP_GLW(LPCmd->LPGenLongWrite)); - assert_param(IS_DSI_LP_DSW0P(LPCmd->LPDcsShortWriteNoP)); - assert_param(IS_DSI_LP_DSW1P(LPCmd->LPDcsShortWriteOneP)); - assert_param(IS_DSI_LP_DSR0P(LPCmd->LPDcsShortReadNoP)); - assert_param(IS_DSI_LP_DLW(LPCmd->LPDcsLongWrite)); - assert_param(IS_DSI_LP_MRDP(LPCmd->LPMaxReadPacket)); - assert_param(IS_DSI_ACK_REQUEST(LPCmd->AcknowledgeRequest)); - - /* Select High-speed or Low-power for command transmission */ - hdsi->Instance->CMCR &= ~(DSI_CMCR_GSW0TX | \ - DSI_CMCR_GSW1TX | \ - DSI_CMCR_GSW2TX | \ - DSI_CMCR_GSR0TX | \ - DSI_CMCR_GSR1TX | \ - DSI_CMCR_GSR2TX | \ - DSI_CMCR_GLWTX | \ - DSI_CMCR_DSW0TX | \ - DSI_CMCR_DSW1TX | \ - DSI_CMCR_DSR0TX | \ - DSI_CMCR_DLWTX | \ - DSI_CMCR_MRDPS); - hdsi->Instance->CMCR |= (LPCmd->LPGenShortWriteNoP | \ - LPCmd->LPGenShortWriteOneP | \ - LPCmd->LPGenShortWriteTwoP | \ - LPCmd->LPGenShortReadNoP | \ - LPCmd->LPGenShortReadOneP | \ - LPCmd->LPGenShortReadTwoP | \ - LPCmd->LPGenLongWrite | \ - LPCmd->LPDcsShortWriteNoP | \ - LPCmd->LPDcsShortWriteOneP | \ - LPCmd->LPDcsShortReadNoP | \ - LPCmd->LPDcsLongWrite | \ - LPCmd->LPMaxReadPacket); - - /* Configure the acknowledge request after each packet transmission */ - hdsi->Instance->CMCR &= ~DSI_CMCR_ARE; - hdsi->Instance->CMCR |= LPCmd->AcknowledgeRequest; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Configure the flow control parameters - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param FlowControl flow control feature(s) to be enabled. - * This parameter can be any combination of @arg DSI_FlowControl. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_FLOW_CONTROL(FlowControl)); - - /* Set the DSI Host Protocol Configuration Register */ - hdsi->Instance->PCR &= ~DSI_FLOW_CONTROL_ALL; - hdsi->Instance->PCR |= FlowControl; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Configure the DSI PHY timer parameters - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param PhyTimers DSI_PHY_TimerTypeDef structure that contains - * the DSI PHY timing parameters - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers) -{ - uint32_t maxTime; - /* Process locked */ - __HAL_LOCK(hdsi); - - maxTime = (PhyTimers->ClockLaneLP2HSTime > PhyTimers->ClockLaneHS2LPTime) ? PhyTimers->ClockLaneLP2HSTime : - PhyTimers->ClockLaneHS2LPTime; - - /* Clock lane timer configuration */ - - /* In Automatic Clock Lane control mode, the DSI Host can turn off the clock lane between two - High-Speed transmission. - To do so, the DSI Host calculates the time required for the clock lane to change from HighSpeed - to Low-Power and from Low-Power to High-Speed. - This timings are configured by the HS2LP_TIME and LP2HS_TIME in the DSI Host Clock Lane Timer Configuration - Register (DSI_CLTCR). - But the DSI Host is not calculating LP2HS_TIME + HS2LP_TIME but 2 x HS2LP_TIME. - - Workaround : Configure HS2LP_TIME and LP2HS_TIME with the same value being the max of HS2LP_TIME or LP2HS_TIME. - */ - hdsi->Instance->CLTCR &= ~(DSI_CLTCR_LP2HS_TIME | DSI_CLTCR_HS2LP_TIME); - hdsi->Instance->CLTCR |= (maxTime | ((maxTime) << 16U)); - - /* Data lane timer configuration */ - hdsi->Instance->DLTCR &= ~(DSI_DLTCR_MRD_TIME | DSI_DLTCR_LP2HS_TIME | DSI_DLTCR_HS2LP_TIME); - hdsi->Instance->DLTCR |= (PhyTimers->DataLaneMaxReadTime | ((PhyTimers->DataLaneLP2HSTime) << 16U) | (( - PhyTimers->DataLaneHS2LPTime) << 24U)); - - /* Configure the wait period to request HS transmission after a stop state */ - hdsi->Instance->PCONFR &= ~DSI_PCONFR_SW_TIME; - hdsi->Instance->PCONFR |= ((PhyTimers->StopWaitTime) << 8U); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Configure the DSI HOST timeout parameters - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param HostTimeouts DSI_HOST_TimeoutTypeDef structure that contains - * the DSI host timeout parameters - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Set the timeout clock division factor */ - hdsi->Instance->CCR &= ~DSI_CCR_TOCKDIV; - hdsi->Instance->CCR |= ((HostTimeouts->TimeoutCkdiv) << 8U); - - /* High-speed transmission timeout */ - hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_HSTX_TOCNT; - hdsi->Instance->TCCR[0U] |= ((HostTimeouts->HighSpeedTransmissionTimeout) << 16U); - - /* Low-power reception timeout */ - hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_LPRX_TOCNT; - hdsi->Instance->TCCR[0U] |= HostTimeouts->LowPowerReceptionTimeout; - - /* High-speed read timeout */ - hdsi->Instance->TCCR[1U] &= ~DSI_TCCR1_HSRD_TOCNT; - hdsi->Instance->TCCR[1U] |= HostTimeouts->HighSpeedReadTimeout; - - /* Low-power read timeout */ - hdsi->Instance->TCCR[2U] &= ~DSI_TCCR2_LPRD_TOCNT; - hdsi->Instance->TCCR[2U] |= HostTimeouts->LowPowerReadTimeout; - - /* High-speed write timeout */ - hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_HSWR_TOCNT; - hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWriteTimeout; - - /* High-speed write presp mode */ - hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_PM; - hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWritePrespMode; - - /* Low-speed write timeout */ - hdsi->Instance->TCCR[4U] &= ~DSI_TCCR4_LPWR_TOCNT; - hdsi->Instance->TCCR[4U] |= HostTimeouts->LowPowerWriteTimeout; - - /* BTA timeout */ - hdsi->Instance->TCCR[5U] &= ~DSI_TCCR5_BTA_TOCNT; - hdsi->Instance->TCCR[5U] |= HostTimeouts->BTATimeout; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Start the DSI module - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Enable the DSI host */ - __HAL_DSI_ENABLE(hdsi); - - /* Enable the DSI wrapper */ - __HAL_DSI_WRAPPER_ENABLE(hdsi); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Stop the DSI module - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Disable the DSI host */ - __HAL_DSI_DISABLE(hdsi); - - /* Disable the DSI wrapper */ - __HAL_DSI_WRAPPER_DISABLE(hdsi); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Refresh the display in command mode - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Update the display */ - hdsi->Instance->WCR |= DSI_WCR_LTDCEN; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Controls the display color mode in Video mode - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param ColorMode Color mode (full or 8-colors). - * This parameter can be any value of @arg DSI_Color_Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_COLOR_MODE(ColorMode)); - - /* Update the display color mode */ - hdsi->Instance->WCR &= ~DSI_WCR_COLM; - hdsi->Instance->WCR |= ColorMode; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Control the display shutdown in Video mode - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param Shutdown Shut-down (Display-ON or Display-OFF). - * This parameter can be any value of @arg DSI_ShutDown - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_SHUT_DOWN(Shutdown)); - - /* Update the display Shutdown */ - hdsi->Instance->WCR &= ~DSI_WCR_SHTDN; - hdsi->Instance->WCR |= Shutdown; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief write short DCS or short Generic command - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param ChannelID Virtual channel ID. - * @param Mode DSI short packet data type. - * This parameter can be any value of @arg DSI_SHORT_WRITE_PKT_Data_Type. - * @param Param1 DSC command or first generic parameter. - * This parameter can be any value of @arg DSI_DCS_Command or a - * generic command code. - * @param Param2 DSC parameter or second generic parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi, - uint32_t ChannelID, - uint32_t Mode, - uint32_t Param1, - uint32_t Param2) -{ - HAL_StatusTypeDef status; - /* Check the parameters */ - assert_param(IS_DSI_SHORT_WRITE_PACKET_TYPE(Mode)); - - /* Process locked */ - __HAL_LOCK(hdsi); - - status = DSI_ShortWrite(hdsi, ChannelID, Mode, Param1, Param2); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return status; -} - -/** - * @brief write long DCS or long Generic command - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param ChannelID Virtual channel ID. - * @param Mode DSI long packet data type. - * This parameter can be any value of @arg DSI_LONG_WRITE_PKT_Data_Type. - * @param NbParams Number of parameters. - * @param Param1 DSC command or first generic parameter. - * This parameter can be any value of @arg DSI_DCS_Command or a - * generic command code - * @param ParametersTable Pointer to parameter values table. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi, - uint32_t ChannelID, - uint32_t Mode, - uint32_t NbParams, - uint32_t Param1, - uint8_t *ParametersTable) -{ - uint32_t uicounter; - uint32_t nbBytes; - uint32_t count; - uint32_t tickstart; - uint32_t fifoword; - uint8_t *pparams = ParametersTable; - - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_LONG_WRITE_PACKET_TYPE(Mode)); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for Command FIFO Empty */ - while ((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - - /* Set the DCS code on payload byte 1, and the other parameters on the write FIFO command*/ - fifoword = Param1; - nbBytes = (NbParams < 3U) ? NbParams : 3U; - - for (count = 0U; count < nbBytes; count++) - { - fifoword |= (((uint32_t)(*(pparams + count))) << (8U + (8U * count))); - } - hdsi->Instance->GPDR = fifoword; - - uicounter = NbParams - nbBytes; - pparams += nbBytes; - /* Set the Next parameters on the write FIFO command*/ - while (uicounter != 0U) - { - nbBytes = (uicounter < 4U) ? uicounter : 4U; - fifoword = 0U; - for (count = 0U; count < nbBytes; count++) - { - fifoword |= (((uint32_t)(*(pparams + count))) << (8U * count)); - } - hdsi->Instance->GPDR = fifoword; - - uicounter -= nbBytes; - pparams += nbBytes; - } - - /* Configure the packet to send a long DCS command */ - DSI_ConfigPacketHeader(hdsi->Instance, - ChannelID, - Mode, - ((NbParams + 1U) & 0x00FFU), - (((NbParams + 1U) & 0xFF00U) >> 8U)); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Read command (DCS or generic) - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param ChannelNbr Virtual channel ID - * @param Array pointer to a buffer to store the payload of a read back operation. - * @param Size Data size to be read (in byte). - * @param Mode DSI read packet data type. - * This parameter can be any value of @arg DSI_SHORT_READ_PKT_Data_Type. - * @param DCSCmd DCS get/read command. - * @param ParametersTable Pointer to parameter values table. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi, - uint32_t ChannelNbr, - uint8_t *Array, - uint32_t Size, - uint32_t Mode, - uint32_t DCSCmd, - uint8_t *ParametersTable) -{ - uint32_t tickstart; - uint8_t *pdata = Array; - uint32_t datasize = Size; - uint32_t fifoword; - uint32_t nbbytes; - uint32_t count; - - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check the parameters */ - assert_param(IS_DSI_READ_PACKET_TYPE(Mode)); - - if (datasize > 2U) - { - /* set max return packet size */ - if (DSI_ShortWrite(hdsi, ChannelNbr, DSI_MAX_RETURN_PKT_SIZE, ((datasize) & 0xFFU), - (((datasize) >> 8U) & 0xFFU)) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - } - - /* Configure the packet to read command */ - if (Mode == DSI_DCS_SHORT_PKT_READ) - { - DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, DCSCmd, 0U); - } - else if (Mode == DSI_GEN_SHORT_PKT_READ_P0) - { - DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, 0U, 0U); - } - else if (Mode == DSI_GEN_SHORT_PKT_READ_P1) - { - DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], 0U); - } - else if (Mode == DSI_GEN_SHORT_PKT_READ_P2) - { - DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], ParametersTable[1U]); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* If DSI fifo is not empty, read requested bytes */ - while (((int32_t)(datasize)) > 0) - { - if ((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == 0U) - { - fifoword = hdsi->Instance->GPDR; - nbbytes = (datasize < 4U) ? datasize : 4U; - - for (count = 0U; count < nbbytes; count++) - { - *pdata = (uint8_t)(fifoword >> (8U * count)); - pdata++; - datasize--; - } - } - - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - - /* Software workaround to avoid HAL_TIMEOUT when a DSI read command is */ - /* issued to the panel and the read data is not captured by the DSI Host */ - /* which returns Packet Size Error. */ - /* Need to ensure that the Read command has finished before checking PSE */ - if ((hdsi->Instance->GPSR & DSI_GPSR_RCB) == 0U) - { - if ((hdsi->Instance->ISR[1U] & DSI_ISR1_PSE) == DSI_ISR1_PSE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - } - } - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL running - * (only data lanes are in ULPM) - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi) -{ - uint32_t tickstart; - - /* Process locked */ - __HAL_LOCK(hdsi); - - /* ULPS Request on Data Lanes */ - hdsi->Instance->PUCR |= DSI_PUCR_URDL; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until the D-PHY active lanes enter into ULPM */ - if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) - { - while ((hdsi->Instance->PSR & DSI_PSR_UAN0) != 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) - { - while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL running - * (only data lanes are in ULPM) - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi) -{ - uint32_t tickstart; - - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Exit ULPS on Data Lanes */ - hdsi->Instance->PUCR |= DSI_PUCR_UEDL; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until all active lanes exit ULPM */ - if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) - { - while ((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) - { - while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1)) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - - /* wait for 1 ms*/ - HAL_Delay(1U); - - /* De-assert the ULPM requests and the ULPM exit bits */ - hdsi->Instance->PUCR = 0U; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off - * (both data and clock lanes are in ULPM) - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi) -{ - uint32_t tickstart; - - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Clock lane configuration: no more HS request */ - hdsi->Instance->CLCR &= ~DSI_CLCR_DPCC; - - /* Use system PLL as byte lane clock source before stopping DSIPHY clock source */ - __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PLLR); - - /* ULPS Request on Clock and Data Lanes */ - hdsi->Instance->PUCR |= (DSI_PUCR_URCL | DSI_PUCR_URDL); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until all active lanes exit ULPM */ - if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) - { - while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) - { - while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - - /* Turn off the DSI PLL */ - __HAL_DSI_PLL_DISABLE(hdsi); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off - * (both data and clock lanes are in ULPM) - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi) -{ - uint32_t tickstart; - - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Turn on the DSI PLL */ - __HAL_DSI_PLL_ENABLE(hdsi); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for the lock of the PLL */ - while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - - /* Exit ULPS on Clock and Data Lanes */ - hdsi->Instance->PUCR |= (DSI_PUCR_UECL | DSI_PUCR_UEDL); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until all active lanes exit ULPM */ - if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) - { - while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UANC)) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) - { - while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1 | - DSI_PSR_UANC)) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) - { - /* Process Unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_TIMEOUT; - } - } - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - - /* wait for 1 ms */ - HAL_Delay(1U); - - /* De-assert the ULPM requests and the ULPM exit bits */ - hdsi->Instance->PUCR = 0U; - - /* Switch the lane byte clock source in the RCC from system PLL to D-PHY */ - __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_DSIPHY); - - /* Restore clock lane configuration to HS */ - hdsi->Instance->CLCR |= DSI_CLCR_DPCC; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Start test pattern generation - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param Mode Pattern generator mode - * This parameter can be one of the following values: - * 0 : Color bars (horizontal or vertical) - * 1 : BER pattern (vertical only) - * @param Orientation Pattern generator orientation - * This parameter can be one of the following values: - * 0 : Vertical color bars - * 1 : Horizontal color bars - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Configure pattern generator mode and orientation */ - hdsi->Instance->VMCR &= ~(DSI_VMCR_PGM | DSI_VMCR_PGO); - hdsi->Instance->VMCR |= ((Mode << 20U) | (Orientation << 24U)); - - /* Enable pattern generator by setting PGE bit */ - hdsi->Instance->VMCR |= DSI_VMCR_PGE; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Stop test pattern generation - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Disable pattern generator by clearing PGE bit */ - hdsi->Instance->VMCR &= ~DSI_VMCR_PGE; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Set Slew-Rate And Delay Tuning - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param CommDelay Communication delay to be adjusted. - * This parameter can be any value of @arg DSI_Communication_Delay - * @param Lane select between clock or data lanes. - * This parameter can be any value of @arg DSI_Lane_Group - * @param Value Custom value of the slew-rate or delay - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, - uint32_t Value) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_DSI_COMMUNICATION_DELAY(CommDelay)); - assert_param(IS_DSI_LANE_GROUP(Lane)); - - switch (CommDelay) - { - case DSI_SLEW_RATE_HSTX: - if (Lane == DSI_CLOCK_LANE) - { - /* High-Speed Transmission Slew Rate Control on Clock Lane */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCCL; - hdsi->Instance->WPCR[1U] |= Value << 16U; - } - else if (Lane == DSI_DATA_LANES) - { - /* High-Speed Transmission Slew Rate Control on Data Lanes */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCDL; - hdsi->Instance->WPCR[1U] |= Value << 18U; - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - break; - case DSI_SLEW_RATE_LPTX: - if (Lane == DSI_CLOCK_LANE) - { - /* Low-Power transmission Slew Rate Compensation on Clock Lane */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCCL; - hdsi->Instance->WPCR[1U] |= Value << 6U; - } - else if (Lane == DSI_DATA_LANES) - { - /* Low-Power transmission Slew Rate Compensation on Data Lanes */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCDL; - hdsi->Instance->WPCR[1U] |= Value << 8U; - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - break; - case DSI_HS_DELAY: - if (Lane == DSI_CLOCK_LANE) - { - /* High-Speed Transmission Delay on Clock Lane */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDCL; - hdsi->Instance->WPCR[1U] |= Value; - } - else if (Lane == DSI_DATA_LANES) - { - /* High-Speed Transmission Delay on Data Lanes */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDDL; - hdsi->Instance->WPCR[1U] |= Value << 2U; - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - break; - default: - break; - } - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Low-Power Reception Filter Tuning - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param Frequency cutoff frequency of low-pass filter at the input of LPRX - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Low-Power RX low-pass Filtering Tuning */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPRXFT; - hdsi->Instance->WPCR[1U] |= Frequency << 25U; - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Activate an additional current path on all lanes to meet the SDDTx parameter - * defined in the MIPI D-PHY specification - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_FUNCTIONAL_STATE(State)); - - /* Activate/Disactivate additional current path on all lanes */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_SDDC; - hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 12U); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Custom lane pins configuration - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param CustomLane Function to be applied on selected lane. - * This parameter can be any value of @arg DSI_CustomLane - * @param Lane select between clock or data lane 0 or data lane 1. - * This parameter can be any value of @arg DSI_Lane_Select - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, - FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_DSI_CUSTOM_LANE(CustomLane)); - assert_param(IS_DSI_LANE(Lane)); - assert_param(IS_FUNCTIONAL_STATE(State)); - - switch (CustomLane) - { - case DSI_SWAP_LANE_PINS: - if (Lane == DSI_CLK_LANE) - { - /* Swap pins on clock lane */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWCL; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 6U); - } - else if (Lane == DSI_DATA_LANE0) - { - /* Swap pins on data lane 0 */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL0; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 7U); - } - else if (Lane == DSI_DATA_LANE1) - { - /* Swap pins on data lane 1 */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL1; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 8U); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - break; - case DSI_INVERT_HS_SIGNAL: - if (Lane == DSI_CLK_LANE) - { - /* Invert HS signal on clock lane */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSICL; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 9U); - } - else if (Lane == DSI_DATA_LANE0) - { - /* Invert HS signal on data lane 0 */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL0; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 10U); - } - else if (Lane == DSI_DATA_LANE1) - { - /* Invert HS signal on data lane 1 */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL1; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 11U); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - break; - default: - break; - } - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Set custom timing for the PHY - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param Timing PHY timing to be adjusted. - * This parameter can be any value of @arg DSI_PHY_Timing - * @param State ENABLE or DISABLE - * @param Value Custom value of the timing - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, uint32_t Value) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_DSI_PHY_TIMING(Timing)); - assert_param(IS_FUNCTIONAL_STATE(State)); - - switch (Timing) - { - case DSI_TCLK_POST: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPOSTEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 27U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[4U] &= ~DSI_WPCR4_TCLKPOST; - hdsi->Instance->WPCR[4U] |= Value & DSI_WPCR4_TCLKPOST; - } - - break; - case DSI_TLPX_CLK: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXCEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 26U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXC; - hdsi->Instance->WPCR[3U] |= (Value << 24U) & DSI_WPCR3_TLPXC; - } - - break; - case DSI_THS_EXIT: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSEXITEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 25U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSEXIT; - hdsi->Instance->WPCR[3U] |= (Value << 16U) & DSI_WPCR3_THSEXIT; - } - - break; - case DSI_TLPX_DATA: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXDEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 24U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXD; - hdsi->Instance->WPCR[3U] |= (Value << 8U) & DSI_WPCR3_TLPXD; - } - - break; - case DSI_THS_ZERO: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSZEROEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 23U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSZERO; - hdsi->Instance->WPCR[3U] |= Value & DSI_WPCR3_THSZERO; - } - - break; - case DSI_THS_TRAIL: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSTRAILEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 22U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSTRAIL; - hdsi->Instance->WPCR[2U] |= (Value << 24U) & DSI_WPCR2_THSTRAIL; - } - - break; - case DSI_THS_PREPARE: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSPREPEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 21U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSPREP; - hdsi->Instance->WPCR[2U] |= (Value << 16U) & DSI_WPCR2_THSPREP; - } - - break; - case DSI_TCLK_ZERO: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKZEROEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 20U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKZERO; - hdsi->Instance->WPCR[2U] |= (Value << 8U) & DSI_WPCR2_TCLKZERO; - } - - break; - case DSI_TCLK_PREPARE: - /* Enable/Disable custom timing setting */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPREPEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 19U); - - if (State != DISABLE) - { - /* Set custom value */ - hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKPREP; - hdsi->Instance->WPCR[2U] |= Value & DSI_WPCR2_TCLKPREP; - } - - break; - default: - break; - } - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Force the Clock/Data Lane in TX Stop Mode - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param Lane select between clock or data lanes. - * This parameter can be any value of @arg DSI_Lane_Group - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_DSI_LANE_GROUP(Lane)); - assert_param(IS_FUNCTIONAL_STATE(State)); - - if (Lane == DSI_CLOCK_LANE) - { - /* Force/Unforce the Clock Lane in TX Stop Mode */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMCL; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 12U); - } - else if (Lane == DSI_DATA_LANES) - { - /* Force/Unforce the Data Lanes in TX Stop Mode */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMDL; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 13U); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_ERROR; - } - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Force LP Receiver in Low-Power Mode - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_FUNCTIONAL_STATE(State)); - - /* Force/Unforce LP Receiver in Low-Power Mode */ - hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_FLPRXLPM; - hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 22U); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Force Data Lanes in RX Mode after a BTA - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_FUNCTIONAL_STATE(State)); - - /* Force Data Lanes in RX Mode */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TDDL; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 16U); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Enable a pull-down on the lanes to prevent from floating states when unused - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_FUNCTIONAL_STATE(State)); - - /* Enable/Disable pull-down on lanes */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_PDEN; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 18U); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @brief Switch off the contention detection on data lanes - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @param State ENABLE or DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State) -{ - /* Process locked */ - __HAL_LOCK(hdsi); - - /* Check function parameters */ - assert_param(IS_FUNCTIONAL_STATE(State)); - - /* Contention Detection on Data Lanes OFF */ - hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_CDOFFDL; - hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 14U); - - /* Process unlocked */ - __HAL_UNLOCK(hdsi); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup DSI_Group4 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DSI state. - (+) Get error code. - -@endverbatim - * @{ - */ - -/** - * @brief Return the DSI state - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval HAL state - */ -HAL_DSI_StateTypeDef HAL_DSI_GetState(DSI_HandleTypeDef *hdsi) -{ - return hdsi->State; -} - -/** - * @brief Return the DSI error code - * @param hdsi pointer to a DSI_HandleTypeDef structure that contains - * the configuration information for the DSI. - * @retval DSI Error Code - */ -uint32_t HAL_DSI_GetError(DSI_HandleTypeDef *hdsi) -{ - /* Get the error code */ - return hdsi->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DSI */ - -#endif /* HAL_DSI_MODULE_ENABLED */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c deleted file mode 100644 index 50d95b8..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c +++ /dev/null @@ -1,3220 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_eth.c - * @author MCD Application Team - * @brief ETH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Ethernet (ETH) peripheral: - * + Initialization and deinitialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The ETH HAL driver can be used as follows: - - (#)Declare a ETH_HandleTypeDef handle structure, for example: - ETH_HandleTypeDef heth; - - (#)Fill parameters of Init structure in heth handle - - (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) - - (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API: - (##) Enable the Ethernet interface clock using - (+++) __HAL_RCC_ETH1MAC_CLK_ENABLE() - (+++) __HAL_RCC_ETH1TX_CLK_ENABLE() - (+++) __HAL_RCC_ETH1RX_CLK_ENABLE() - - (##) Initialize the related GPIO clocks - (##) Configure Ethernet pinout - (##) Configure Ethernet NVIC interrupt (in Interrupt mode) - - (#) Ethernet data reception is asynchronous, so call the following API - to start the listening mode: - (##) HAL_ETH_Start(): - This API starts the MAC and DMA transmission and reception process, - without enabling end of transfer interrupts, in this mode user - has to poll for data reception by calling HAL_ETH_ReadData() - (##) HAL_ETH_Start_IT(): - This API starts the MAC and DMA transmission and reception process, - end of transfer interrupts are enabled in this mode, - HAL_ETH_RxCpltCallback() will be executed when an Ethernet packet is received - - (#) When data is received user can call the following API to get received data: - (##) HAL_ETH_ReadData(): Read a received packet - - (#) For transmission path, two APIs are available: - (##) HAL_ETH_Transmit(): Transmit an ETH frame in blocking mode - (##) HAL_ETH_Transmit_IT(): Transmit an ETH frame in interrupt mode, - HAL_ETH_TxCpltCallback() will be executed when end of transfer occur - - (#) Communication with an external PHY device: - (##) HAL_ETH_ReadPHYRegister(): Read a register from an external PHY - (##) HAL_ETH_WritePHYRegister(): Write data to an external RHY register - - (#) Configure the Ethernet MAC after ETH peripheral initialization - (##) HAL_ETH_GetMACConfig(): Get MAC actual configuration into ETH_MACConfigTypeDef - (##) HAL_ETH_SetMACConfig(): Set MAC configuration based on ETH_MACConfigTypeDef - - (#) Configure the Ethernet DMA after ETH peripheral initialization - (##) HAL_ETH_GetDMAConfig(): Get DMA actual configuration into ETH_DMAConfigTypeDef - (##) HAL_ETH_SetDMAConfig(): Set DMA configuration based on ETH_DMAConfigTypeDef - - (#) Configure the Ethernet PTP after ETH peripheral initialization - (##) Define HAL_ETH_USE_PTP to use PTP APIs. - (##) HAL_ETH_PTP_GetConfig(): Get PTP actual configuration into ETH_PTP_ConfigTypeDef - (##) HAL_ETH_PTP_SetConfig(): Set PTP configuration based on ETH_PTP_ConfigTypeDef - (##) HAL_ETH_PTP_GetTime(): Get Seconds and Nanoseconds for the Ethernet PTP registers - (##) HAL_ETH_PTP_SetTime(): Set Seconds and Nanoseconds for the Ethernet PTP registers - (##) HAL_ETH_PTP_AddTimeOffset(): Add Seconds and Nanoseconds offset for the Ethernet PTP registers - (##) HAL_ETH_PTP_InsertTxTimestamp(): Insert Timestamp in transmission - (##) HAL_ETH_PTP_GetTxTimestamp(): Get transmission timestamp - (##) HAL_ETH_PTP_GetRxTimestamp(): Get reception timestamp - - -@- The ARP offload feature is not supported in this driver. - - -@- The PTP offload feature is not supported in this driver. - - *** Callback registration *** - ============================================= - - The compilation define USE_HAL_ETH_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Function HAL_ETH_RegisterCallback() to register an interrupt callback. - - Function HAL_ETH_RegisterCallback() allows to register following callbacks: - (+) TxCpltCallback : Tx Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) PMTCallback : Power Management Callback - (+) EEECallback : EEE Callback. - (+) WakeUpCallback : Wake UP Callback - (+) MspInitCallback : MspInit Callback. - (+) MspDeInitCallback: MspDeInit Callback. - - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - For specific callbacks RxAllocateCallback use dedicated register callbacks: - respectively HAL_ETH_RegisterRxAllocateCallback(). - - For specific callbacks RxLinkCallback use dedicated register callbacks: - respectively HAL_ETH_RegisterRxLinkCallback(). - - For specific callbacks TxFreeCallback use dedicated register callbacks: - respectively HAL_ETH_RegisterTxFreeCallback(). - - For specific callbacks TxPtpCallback use dedicated register callbacks: - respectively HAL_ETH_RegisterTxPtpCallback(). - - Use function HAL_ETH_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_ETH_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) TxCpltCallback : Tx Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) PMTCallback : Power Management Callback - (+) EEECallback : EEE Callback. - (+) WakeUpCallback : Wake UP Callback - (+) MspInitCallback : MspInit Callback. - (+) MspDeInitCallback: MspDeInit Callback. - - For specific callbacks RxAllocateCallback use dedicated unregister callbacks: - respectively HAL_ETH_UnRegisterRxAllocateCallback(). - - For specific callbacks RxLinkCallback use dedicated unregister callbacks: - respectively HAL_ETH_UnRegisterRxLinkCallback(). - - For specific callbacks TxFreeCallback use dedicated unregister callbacks: - respectively HAL_ETH_UnRegisterTxFreeCallback(). - - For specific callbacks TxPtpCallback use dedicated unregister callbacks: - respectively HAL_ETH_UnRegisterTxPtpCallback(). - - By default, after the HAL_ETH_Init and when the state is HAL_ETH_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_ETH_TxCpltCallback(), HAL_ETH_RxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak function in the HAL_ETH_Init/ HAL_ETH_DeInit only when - these callbacks are null (not registered beforehand). - if not, MspInit or MspDeInit are not null, the HAL_ETH_Init/ HAL_ETH_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) - - Callbacks can be registered/unregistered in HAL_ETH_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_ETH_STATE_READY or HAL_ETH_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_ETH_RegisterCallback() before calling HAL_ETH_DeInit - or HAL_ETH_Init function. - - When The compilation define USE_HAL_ETH_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#ifdef HAL_ETH_MODULE_ENABLED - -#if defined(ETH) - -/** @defgroup ETH ETH - * @brief ETH HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup ETH_Private_Constants ETH Private Constants - * @{ - */ -#define ETH_MACCR_MASK 0xFFFB7F7CU -#define ETH_MACECR_MASK 0x3F077FFFU -#define ETH_MACFFR_MASK 0x800007FFU -#define ETH_MACWTR_MASK 0x0000010FU -#define ETH_MACTFCR_MASK 0xFFFF00F2U -#define ETH_MACRFCR_MASK 0x00000003U -#define ETH_MTLTQOMR_MASK 0x00000072U -#define ETH_MTLRQOMR_MASK 0x0000007BU - -#define ETH_DMAMR_MASK 0x00007802U -#define ETH_DMASBMR_MASK 0x0000D001U -#define ETH_DMACCR_MASK 0x00013FFFU -#define ETH_DMACTCR_MASK 0x003F1010U -#define ETH_DMACRCR_MASK 0x803F0000U -#define ETH_MACPMTCSR_MASK (ETH_MACPMTCSR_PD | ETH_MACPMTCSR_WFE | \ - ETH_MACPMTCSR_MPE | ETH_MACPMTCSR_GU) - -/* Timeout values */ -#define ETH_SWRESET_TIMEOUT 500U -#define ETH_MDIO_BUS_TIMEOUT 1000U - -#define ETH_DMARXDESC_ERRORS_MASK ((uint32_t)(ETH_DMARXDESC_DBE | ETH_DMARXDESC_RE | \ - ETH_DMARXDESC_OE | ETH_DMARXDESC_RWT |\ - ETH_DMARXDESC_LC | ETH_DMARXDESC_CE |\ - ETH_DMARXDESC_DE | ETH_DMARXDESC_IPV4HCE)) - -#define ETH_MAC_US_TICK 1000000U - -#define ETH_MACTSCR_MASK 0x0087FF2FU - -#define ETH_PTPTSHR_VALUE 0xFFFFFFFFU -#define ETH_PTPTSLR_VALUE 0xBB9ACA00U - -/* Ethernet MACMIIAR register Mask */ -#define ETH_MACMIIAR_CR_MASK 0xFFFFFFE3U - -/* Delay to wait when writing to some Ethernet registers */ -#define ETH_REG_WRITE_DELAY 0x00000001U - -/* ETHERNET MACCR register Mask */ -#define ETH_MACCR_CLEAR_MASK 0xFF20810FU - -/* ETHERNET MACFCR register Mask */ -#define ETH_MACFCR_CLEAR_MASK 0x0000FF41U - -/* ETHERNET DMAOMR register Mask */ -#define ETH_DMAOMR_CLEAR_MASK 0xF8DE3F23U - -/* ETHERNET MAC address offsets */ -#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + 0x40U) /* ETHERNET MAC address high offset */ -#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + 0x44U) /* ETHERNET MAC address low offset */ - -/* ETHERNET DMA Rx descriptors Frame length Shift */ -#define ETH_DMARXDESC_FRAMELENGTHSHIFT 16U -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup ETH_Private_Macros ETH Private Macros - * @{ - */ -/* Helper macros for TX descriptor handling */ -#define INCR_TX_DESC_INDEX(inx, offset) do {\ - (inx) += (offset);\ - if ((inx) >= (uint32_t)ETH_TX_DESC_CNT){\ - (inx) = ((inx) - (uint32_t)ETH_TX_DESC_CNT);}\ - } while (0) - -/* Helper macros for RX descriptor handling */ -#define INCR_RX_DESC_INDEX(inx, offset) do {\ - (inx) += (offset);\ - if ((inx) >= (uint32_t)ETH_RX_DESC_CNT){\ - (inx) = ((inx) - (uint32_t)ETH_RX_DESC_CNT);}\ - } while (0) -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup ETH_Private_Functions ETH Private Functions - * @{ - */ -static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); -static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); -static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth); -static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth); -static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth); -static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t ItMode); -static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth); -static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth); -static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr); - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) -static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @defgroup ETH_Exported_Functions ETH Exported Functions - * @{ - */ - -/** @defgroup ETH_Exported_Functions_Group1 Initialization and deinitialization functions - * @brief Initialization and Configuration functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the ETH peripheral: - - (+) User must Implement HAL_ETH_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO and NVIC ). - - (+) Call the function HAL_ETH_Init() to configure the selected device with - the selected configuration: - (++) MAC address - (++) Media interface (MII or RMII) - (++) Rx DMA Descriptors Tab - (++) Tx DMA Descriptors Tab - (++) Length of Rx Buffers - - (+) Call the function HAL_ETH_DeInit() to restore the default configuration - of the selected ETH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the Ethernet peripheral registers. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth) -{ - uint32_t tickstart; - - if (heth == NULL) - { - return HAL_ERROR; - } - if (heth->gState == HAL_ETH_STATE_RESET) - { - heth->gState = HAL_ETH_STATE_BUSY; - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - - ETH_InitCallbacksToDefault(heth); - - if (heth->MspInitCallback == NULL) - { - heth->MspInitCallback = HAL_ETH_MspInit; - } - - /* Init the low level hardware */ - heth->MspInitCallback(heth); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC. */ - HAL_ETH_MspInit(heth); - -#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ - } - - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Select MII or RMII Mode*/ - SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL); - SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface; - /* Dummy read to sync SYSCFG with ETH */ - (void)SYSCFG->PMC; - - /* Ethernet Software reset */ - /* Set the SWR bit: resets all MAC subsystem internal registers and logic */ - /* After reset all the registers holds their respective reset values */ - SET_BIT(heth->Instance->DMABMR, ETH_DMABMR_SR); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for software reset */ - while (READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_SR) > 0U) - { - if (((HAL_GetTick() - tickstart) > ETH_SWRESET_TIMEOUT)) - { - /* Set Error Code */ - heth->ErrorCode = HAL_ETH_ERROR_TIMEOUT; - /* Set State as Error */ - heth->gState = HAL_ETH_STATE_ERROR; - /* Return Error */ - return HAL_ERROR; - } - } - - - /*------------------ MAC, MTL and DMA default Configuration ----------------*/ - ETH_MACDMAConfig(heth); - - - /*------------------ DMA Tx Descriptors Configuration ----------------------*/ - ETH_DMATxDescListInit(heth); - - /*------------------ DMA Rx Descriptors Configuration ----------------------*/ - ETH_DMARxDescListInit(heth); - - /*--------------------- ETHERNET MAC Address Configuration ------------------*/ - ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr); - - heth->ErrorCode = HAL_ETH_ERROR_NONE; - heth->gState = HAL_ETH_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the ETH peripheral. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth) -{ - /* Set the ETH peripheral state to BUSY */ - heth->gState = HAL_ETH_STATE_BUSY; - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - - if (heth->MspDeInitCallback == NULL) - { - heth->MspDeInitCallback = HAL_ETH_MspDeInit; - } - /* DeInit the low level hardware */ - heth->MspDeInitCallback(heth); -#else - - /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ - HAL_ETH_MspDeInit(heth); - -#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ - - /* Set ETH HAL state to Disabled */ - heth->gState = HAL_ETH_STATE_RESET; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initializes the ETH MSP. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes ETH MSP. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User ETH Callback - * To be used instead of the weak predefined callback - * @param heth eth handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID - * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID - * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, - pETH_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - if (heth->gState == HAL_ETH_STATE_READY) - { - switch (CallbackID) - { - case HAL_ETH_TX_COMPLETE_CB_ID : - heth->TxCpltCallback = pCallback; - break; - - case HAL_ETH_RX_COMPLETE_CB_ID : - heth->RxCpltCallback = pCallback; - break; - - case HAL_ETH_ERROR_CB_ID : - heth->ErrorCallback = pCallback; - break; - - case HAL_ETH_PMT_CB_ID : - heth->PMTCallback = pCallback; - break; - - - case HAL_ETH_WAKEUP_CB_ID : - heth->WakeUpCallback = pCallback; - break; - - case HAL_ETH_MSPINIT_CB_ID : - heth->MspInitCallback = pCallback; - break; - - case HAL_ETH_MSPDEINIT_CB_ID : - heth->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (heth->gState == HAL_ETH_STATE_RESET) - { - switch (CallbackID) - { - case HAL_ETH_MSPINIT_CB_ID : - heth->MspInitCallback = pCallback; - break; - - case HAL_ETH_MSPDEINIT_CB_ID : - heth->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Unregister an ETH Callback - * ETH callabck is redirected to the weak predefined callback - * @param heth eth handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID - * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID - * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (heth->gState == HAL_ETH_STATE_READY) - { - switch (CallbackID) - { - case HAL_ETH_TX_COMPLETE_CB_ID : - heth->TxCpltCallback = HAL_ETH_TxCpltCallback; - break; - - case HAL_ETH_RX_COMPLETE_CB_ID : - heth->RxCpltCallback = HAL_ETH_RxCpltCallback; - break; - - case HAL_ETH_ERROR_CB_ID : - heth->ErrorCallback = HAL_ETH_ErrorCallback; - break; - - case HAL_ETH_PMT_CB_ID : - heth->PMTCallback = HAL_ETH_PMTCallback; - break; - - - case HAL_ETH_WAKEUP_CB_ID : - heth->WakeUpCallback = HAL_ETH_WakeUpCallback; - break; - - case HAL_ETH_MSPINIT_CB_ID : - heth->MspInitCallback = HAL_ETH_MspInit; - break; - - case HAL_ETH_MSPDEINIT_CB_ID : - heth->MspDeInitCallback = HAL_ETH_MspDeInit; - break; - - default : - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (heth->gState == HAL_ETH_STATE_RESET) - { - switch (CallbackID) - { - case HAL_ETH_MSPINIT_CB_ID : - heth->MspInitCallback = HAL_ETH_MspInit; - break; - - case HAL_ETH_MSPDEINIT_CB_ID : - heth->MspDeInitCallback = HAL_ETH_MspDeInit; - break; - - default : - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - return status; -} -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup ETH_Exported_Functions_Group2 IO operation functions - * @brief ETH Transmit and Receive functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to manage the ETH - data transfer. - -@endverbatim - * @{ - */ - -/** - * @brief Enables Ethernet MAC and DMA reception and transmission - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg1; - - if (heth->gState == HAL_ETH_STATE_READY) - { - heth->gState = HAL_ETH_STATE_BUSY; - - /* Set nombre of descriptors to build */ - heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; - - /* Build all descriptors */ - ETH_UpdateDescriptor(heth); - - /* Enable the MAC transmission */ - SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Enable the MAC reception */ - SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Flush Transmit FIFO */ - ETH_FlushTransmitFIFO(heth); - - /* Enable the DMA transmission */ - SET_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_ST); - - /* Enable the DMA reception */ - SET_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_SR); - - heth->gState = HAL_ETH_STATE_STARTED; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enables Ethernet MAC and DMA reception/transmission in Interrupt mode - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg1; - - if (heth->gState == HAL_ETH_STATE_READY) - { - heth->gState = HAL_ETH_STATE_BUSY; - - /* save IT mode to ETH Handle */ - heth->RxDescList.ItMode = 1U; - /* Disable MMC Interrupts */ - SET_BIT(heth->Instance->MACIMR, ETH_MACIMR_TSTIM | ETH_MACIMR_PMTIM); - - /* Disable Rx MMC Interrupts */ - SET_BIT(heth->Instance->MMCRIMR, ETH_MMCRIMR_RGUFM | ETH_MMCRIMR_RFAEM | \ - ETH_MMCRIMR_RFCEM); - - /* Disable Tx MMC Interrupts */ - SET_BIT(heth->Instance->MMCTIMR, ETH_MMCTIMR_TGFM | ETH_MMCTIMR_TGFMSCM | \ - ETH_MMCTIMR_TGFSCM); - - /* Set nombre of descriptors to build */ - heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; - - /* Build all descriptors */ - ETH_UpdateDescriptor(heth); - - /* Enable the MAC transmission */ - SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Enable the MAC reception */ - SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Flush Transmit FIFO */ - ETH_FlushTransmitFIFO(heth); - - /* Enable the DMA transmission */ - SET_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_ST); - - /* Enable the DMA reception */ - SET_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_SR); - - /* Enable ETH DMA interrupts: - - Tx complete interrupt - - Rx complete interrupt - - Fatal bus interrupt - */ - __HAL_ETH_DMA_ENABLE_IT(heth, (ETH_DMAIER_NISE | ETH_DMAIER_RIE | ETH_DMAIER_TIE | - ETH_DMAIER_FBEIE | ETH_DMAIER_AISE | ETH_DMAIER_RBUIE)); - - heth->gState = HAL_ETH_STATE_STARTED; - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Stop Ethernet MAC and DMA reception/transmission - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg1; - - if (heth->gState == HAL_ETH_STATE_STARTED) - { - /* Set the ETH peripheral state to BUSY */ - heth->gState = HAL_ETH_STATE_BUSY; - /* Disable the DMA transmission */ - CLEAR_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_ST); - - /* Disable the DMA reception */ - CLEAR_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_SR); - - /* Disable the MAC reception */ - CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Flush Transmit FIFO */ - ETH_FlushTransmitFIFO(heth); - - /* Disable the MAC transmission */ - CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - heth->gState = HAL_ETH_STATE_READY; - - /* Return function status */ - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Stop Ethernet MAC and DMA reception/transmission in Interrupt mode - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth) -{ - ETH_DMADescTypeDef *dmarxdesc; - uint32_t descindex; - uint32_t tmpreg1; - - if (heth->gState == HAL_ETH_STATE_STARTED) - { - /* Set the ETH peripheral state to BUSY */ - heth->gState = HAL_ETH_STATE_BUSY; - - __HAL_ETH_DMA_DISABLE_IT(heth, (ETH_DMAIER_NISE | ETH_DMAIER_RIE | ETH_DMAIER_TIE | - ETH_DMAIER_FBEIE | ETH_DMAIER_AISE | ETH_DMAIER_RBUIE)); - - /* Disable the DMA transmission */ - CLEAR_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_ST); - - /* Disable the DMA reception */ - CLEAR_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_SR); - - /* Disable the MAC reception */ - CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Flush Transmit FIFO */ - ETH_FlushTransmitFIFO(heth); - - /* Disable the MAC transmission */ - CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /* Clear IOC bit to all Rx descriptors */ - for (descindex = 0; descindex < (uint32_t)ETH_RX_DESC_CNT; descindex++) - { - dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descindex]; - SET_BIT(dmarxdesc->DESC1, ETH_DMARXDESC_DIC); - } - - heth->RxDescList.ItMode = 0U; - - heth->gState = HAL_ETH_STATE_READY; - - /* Return function status */ - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sends an Ethernet Packet in polling mode. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pTxConfig: Hold the configuration of packet to be transmitted - * @param Timeout: timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t Timeout) -{ - uint32_t tickstart; - ETH_DMADescTypeDef *dmatxdesc; - - if (pTxConfig == NULL) - { - heth->ErrorCode |= HAL_ETH_ERROR_PARAM; - return HAL_ERROR; - } - - if (heth->gState == HAL_ETH_STATE_STARTED) - { - /* Config DMA Tx descriptor by Tx Packet info */ - if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 0) != HAL_ETH_ERROR_NONE) - { - /* Set the ETH error code */ - heth->ErrorCode |= HAL_ETH_ERROR_BUSY; - return HAL_ERROR; - } - - /* Ensure completion of descriptor preparation before transmission start */ - __DSB(); - - dmatxdesc = (ETH_DMADescTypeDef *)(&heth->TxDescList)->TxDesc[heth->TxDescList.CurTxDesc]; - - /* Incr current tx desc index */ - INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); - - /* Start transmission */ - /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ - WRITE_REG(heth->Instance->DMATPDR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); - - tickstart = HAL_GetTick(); - - /* Wait for data to be transmitted or timeout occurred */ - while ((dmatxdesc->DESC0 & ETH_DMATXDESC_OWN) != (uint32_t)RESET) - { - if ((heth->Instance->DMASR & ETH_DMASR_FBES) != (uint32_t)RESET) - { - heth->ErrorCode |= HAL_ETH_ERROR_DMA; - heth->DMAErrorCode = heth->Instance->DMASR; - /* Return function status */ - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - heth->ErrorCode |= HAL_ETH_ERROR_TIMEOUT; - /* Clear TX descriptor so that we can proceed */ - dmatxdesc->DESC0 = (ETH_DMATXDESC_FS | ETH_DMATXDESC_LS); - return HAL_ERROR; - } - } - } - - /* Return function status */ - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sends an Ethernet Packet in interrupt mode. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pTxConfig: Hold the configuration of packet to be transmitted - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig) -{ - if (pTxConfig == NULL) - { - heth->ErrorCode |= HAL_ETH_ERROR_PARAM; - return HAL_ERROR; - } - - if (heth->gState == HAL_ETH_STATE_STARTED) - { - /* Save the packet pointer to release. */ - heth->TxDescList.CurrentPacketAddress = (uint32_t *)pTxConfig->pData; - - /* Config DMA Tx descriptor by Tx Packet info */ - if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 1) != HAL_ETH_ERROR_NONE) - { - heth->ErrorCode |= HAL_ETH_ERROR_BUSY; - return HAL_ERROR; - } - - /* Ensure completion of descriptor preparation before transmission start */ - __DSB(); - - /* Incr current tx desc index */ - INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); - - /* Start transmission */ - /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ - if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET) - { - /* Clear TBUS ETHERNET DMA flag */ - (heth->Instance)->DMASR = ETH_DMASR_TBUS; - /* Resume DMA transmission*/ - (heth->Instance)->DMATPDR = 0U; - } - - return HAL_OK; - - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Read a received packet. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pAppBuff: Pointer to an application buffer to receive the packet. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff) -{ - uint32_t descidx; - ETH_DMADescTypeDef *dmarxdesc; - uint32_t desccnt = 0U; - uint32_t desccntmax; - uint32_t bufflength; - uint8_t rxdataready = 0U; - - - if (pAppBuff == NULL) - { - heth->ErrorCode |= HAL_ETH_ERROR_PARAM; - return HAL_ERROR; - } - - if (heth->gState != HAL_ETH_STATE_STARTED) - { - return HAL_ERROR; - } - - descidx = heth->RxDescList.RxDescIdx; - dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; - desccntmax = ETH_RX_DESC_CNT - heth->RxDescList.RxBuildDescCnt; - - /* Check if descriptor is not owned by DMA */ - while ((READ_BIT(dmarxdesc->DESC0, ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (desccnt < desccntmax) - && (rxdataready == 0U)) - { - if (READ_BIT(dmarxdesc->DESC0, ETH_DMARXDESC_LS) != (uint32_t)RESET) - { - /* Get timestamp high */ - heth->RxDescList.TimeStamp.TimeStampHigh = dmarxdesc->DESC6; - /* Get timestamp low */ - heth->RxDescList.TimeStamp.TimeStampLow = dmarxdesc->DESC7; - } - if ((READ_BIT(dmarxdesc->DESC0, ETH_DMARXDESC_FS) != (uint32_t)RESET) || (heth->RxDescList.pRxStart != NULL)) - { - /* Check first descriptor */ - if (READ_BIT(dmarxdesc->DESC0, ETH_DMARXDESC_FS) != (uint32_t)RESET) - { - heth->RxDescList.RxDescCnt = 0; - heth->RxDescList.RxDataLength = 0; - } - - /* Check if last descriptor */ - bufflength = heth->Init.RxBuffLen; - if (READ_BIT(dmarxdesc->DESC0, ETH_DMARXDESC_LS) != (uint32_t)RESET) - { - /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */ - bufflength = ((dmarxdesc->DESC0 & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U; - - /* Save Last descriptor index */ - heth->RxDescList.pRxLastRxDesc = dmarxdesc->DESC0; - - /* Packet ready */ - rxdataready = 1; - } - - /* Link data */ - WRITE_REG(dmarxdesc->BackupAddr0, dmarxdesc->DESC2); -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /*Call registered Link callback*/ - heth->rxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, - (uint8_t *)dmarxdesc->BackupAddr0, bufflength); -#else - /* Link callback */ - HAL_ETH_RxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, - (uint8_t *)dmarxdesc->BackupAddr0, (uint16_t) bufflength); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - heth->RxDescList.RxDescCnt++; - heth->RxDescList.RxDataLength += bufflength; - - /* Clear buffer pointer */ - dmarxdesc->BackupAddr0 = 0; - } - - /* Increment current rx descriptor index */ - INCR_RX_DESC_INDEX(descidx, 1U); - /* Get current descriptor address */ - dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; - desccnt++; - } - - heth->RxDescList.RxBuildDescCnt += desccnt; - if ((heth->RxDescList.RxBuildDescCnt) != 0U) - { - /* Update Descriptors */ - ETH_UpdateDescriptor(heth); - } - - heth->RxDescList.RxDescIdx = descidx; - - if (rxdataready == 1U) - { - /* Return received packet */ - *pAppBuff = heth->RxDescList.pRxStart; - /* Reset first element */ - heth->RxDescList.pRxStart = NULL; - - return HAL_OK; - } - - /* Packet not ready */ - return HAL_ERROR; -} - -/** - * @brief This function gives back Rx Desc of the last received Packet - * to the DMA, so ETH DMA will be able to use these descriptors - * to receive next Packets. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth) -{ - uint32_t descidx; - uint32_t desccount; - ETH_DMADescTypeDef *dmarxdesc; - uint8_t *buff = NULL; - uint8_t allocStatus = 1U; - - descidx = heth->RxDescList.RxBuildDescIdx; - dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; - desccount = heth->RxDescList.RxBuildDescCnt; - - while ((desccount > 0U) && (allocStatus != 0U)) - { - /* Check if a buffer's attached the descriptor */ - if (READ_REG(dmarxdesc->BackupAddr0) == 0U) - { - /* Get a new buffer. */ -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /*Call registered Allocate callback*/ - heth->rxAllocateCallback(&buff); -#else - /* Allocate callback */ - HAL_ETH_RxAllocateCallback(&buff); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - if (buff == NULL) - { - allocStatus = 0U; - } - else - { - WRITE_REG(dmarxdesc->BackupAddr0, (uint32_t)buff); - WRITE_REG(dmarxdesc->DESC2, (uint32_t)buff); - } - } - - if (allocStatus != 0U) - { - if (heth->RxDescList.ItMode == 0U) - { - WRITE_REG(dmarxdesc->DESC1, ETH_DMARXDESC_DIC | ETH_RX_BUF_SIZE | ETH_DMARXDESC_RCH); - } - else - { - WRITE_REG(dmarxdesc->DESC1, ETH_RX_BUF_SIZE | ETH_DMARXDESC_RCH); - } - - /* Before transferring the ownership to DMA, make sure that the RX descriptors bits writing - is fully performed. - The __DMB() instruction is added to avoid any potential compiler optimization that - may lead to abnormal behavior. */ - __DMB(); - - SET_BIT(dmarxdesc->DESC0, ETH_DMARXDESC_OWN); - - /* Increment current rx descriptor index */ - INCR_RX_DESC_INDEX(descidx, 1U); - /* Get current descriptor address */ - dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; - desccount--; - } - } - - if (heth->RxDescList.RxBuildDescCnt != desccount) - { - /* Set the Tail pointer address */ - WRITE_REG(heth->Instance->DMARPDR, 0); - - heth->RxDescList.RxBuildDescIdx = descidx; - heth->RxDescList.RxBuildDescCnt = desccount; - } -} - -/** - * @brief Register the Rx alloc callback. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param rxAllocateCallback: pointer to function to alloc buffer - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, - pETH_rxAllocateCallbackTypeDef rxAllocateCallback) -{ - if (rxAllocateCallback == NULL) - { - /* No buffer to save */ - return HAL_ERROR; - } - - /* Set function to allocate buffer */ - heth->rxAllocateCallback = rxAllocateCallback; - - return HAL_OK; -} - -/** - * @brief Unregister the Rx alloc callback. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth) -{ - /* Set function to allocate buffer */ - heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; - - return HAL_OK; -} - -/** - * @brief Rx Allocate callback. - * @param buff: pointer to allocated buffer - * @retval None - */ -__weak void HAL_ETH_RxAllocateCallback(uint8_t **buff) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(buff); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_RxAllocateCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Link callback. - * @param pStart: pointer to packet start - * @param pStart: pointer to packet end - * @param buff: pointer to received data - * @param Length: received data length - * @retval None - */ -__weak void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(pStart); - UNUSED(pEnd); - UNUSED(buff); - UNUSED(Length); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_RxLinkCallback could be implemented in the user file - */ -} - -/** - * @brief Set the Rx link data function. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param rxLinkCallback: pointer to function to link data - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback) -{ - if (rxLinkCallback == NULL) - { - /* No buffer to save */ - return HAL_ERROR; - } - - /* Set function to link data */ - heth->rxLinkCallback = rxLinkCallback; - - return HAL_OK; -} - -/** - * @brief Unregister the Rx link callback. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth) -{ - /* Set function to allocate buffer */ - heth->rxLinkCallback = HAL_ETH_RxLinkCallback; - - return HAL_OK; -} - -/** - * @brief Get the error state of the last received packet. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pErrorCode: pointer to uint32_t to hold the error code - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(ETH_HandleTypeDef *heth, uint32_t *pErrorCode) -{ - /* Get error bits. */ - *pErrorCode = READ_BIT(heth->RxDescList.pRxLastRxDesc, ETH_DMARXDESC_ERRORS_MASK); - - return HAL_OK; -} - -/** - * @brief Set the Tx free function. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param txFreeCallback: pointer to function to release the packet - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback) -{ - if (txFreeCallback == NULL) - { - /* No buffer to save */ - return HAL_ERROR; - } - - /* Set function to free transmmitted packet */ - heth->txFreeCallback = txFreeCallback; - - return HAL_OK; -} - -/** - * @brief Unregister the Tx free callback. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth) -{ - /* Set function to allocate buffer */ - heth->txFreeCallback = HAL_ETH_TxFreeCallback; - - return HAL_OK; -} - -/** - * @brief Tx Free callback. - * @param buff: pointer to buffer to free - * @retval None - */ -__weak void HAL_ETH_TxFreeCallback(uint32_t *buff) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(buff); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_TxFreeCallback could be implemented in the user file - */ -} - -/** - * @brief Release transmitted Tx packets. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth) -{ - ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; - uint32_t numOfBuf = dmatxdesclist->BuffersInUse; - uint32_t idx = dmatxdesclist->releaseIndex; - uint8_t pktTxStatus = 1U; - uint8_t pktInUse; -#ifdef HAL_ETH_USE_PTP - ETH_TimeStampTypeDef *timestamp = &heth->TxTimestamp; -#endif /* HAL_ETH_USE_PTP */ - - /* Loop through buffers in use. */ - while ((numOfBuf != 0U) && (pktTxStatus != 0U)) - { - pktInUse = 1U; - numOfBuf--; - /* If no packet, just examine the next packet. */ - if (dmatxdesclist->PacketAddress[idx] == NULL) - { - /* No packet in use, skip to next. */ - idx = (idx + 1U) & (ETH_TX_DESC_CNT - 1U); - pktInUse = 0U; - } - - if (pktInUse != 0U) - { - /* Determine if the packet has been transmitted. */ - if ((heth->Init.TxDesc[idx].DESC0 & ETH_DMATXDESC_OWN) == 0U) - { -#ifdef HAL_ETH_USE_PTP - /* Get timestamp low */ - timestamp->TimeStampLow = heth->Init.TxDesc[idx].DESC6; - /* Get timestamp high */ - timestamp->TimeStampHigh = heth->Init.TxDesc[idx].DESC7; -#endif /* HAL_ETH_USE_PTP */ - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /*Call registered callbacks*/ -#ifdef HAL_ETH_USE_PTP - /* Handle Ptp */ - heth->txPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); -#endif /* HAL_ETH_USE_PTP */ - /* Release the packet. */ - heth->txFreeCallback(dmatxdesclist->PacketAddress[idx]); -#else - /* Call callbacks */ -#ifdef HAL_ETH_USE_PTP - /* Handle Ptp */ - HAL_ETH_TxPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); -#endif /* HAL_ETH_USE_PTP */ - /* Release the packet. */ - HAL_ETH_TxFreeCallback(dmatxdesclist->PacketAddress[idx]); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - - /* Clear the entry in the in-use array. */ - dmatxdesclist->PacketAddress[idx] = NULL; - - /* Update the transmit relesae index and number of buffers in use. */ - idx = (idx + 1U) & (ETH_TX_DESC_CNT - 1U); - dmatxdesclist->BuffersInUse = numOfBuf; - dmatxdesclist->releaseIndex = idx; - } - else - { - /* Get out of the loop! */ - pktTxStatus = 0U; - } - } - } - return HAL_OK; -} - -#ifdef HAL_ETH_USE_PTP -/** - * @brief Set the Ethernet PTP configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains - * the configuration information for PTP - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) -{ - uint32_t tmpTSCR; - ETH_TimeTypeDef time; - - if (ptpconfig == NULL) - { - return HAL_ERROR; - } - - tmpTSCR = ptpconfig->Timestamp | - ((uint32_t)ptpconfig->TimestampUpdate << ETH_PTPTSCR_TSFCU_Pos) | - ((uint32_t)ptpconfig->TimestampAll << ETH_PTPTSCR_TSSARFE_Pos) | - ((uint32_t)ptpconfig->TimestampRolloverMode << ETH_PTPTSCR_TSSSR_Pos) | - ((uint32_t)ptpconfig->TimestampV2 << ETH_PTPTSCR_TSPTPPSV2E_Pos) | - ((uint32_t)ptpconfig->TimestampEthernet << ETH_PTPTSCR_TSSPTPOEFE_Pos) | - ((uint32_t)ptpconfig->TimestampIPv6 << ETH_PTPTSCR_TSSIPV6FE_Pos) | - ((uint32_t)ptpconfig->TimestampIPv4 << ETH_PTPTSCR_TSSIPV4FE_Pos) | - ((uint32_t)ptpconfig->TimestampEvent << ETH_PTPTSCR_TSSEME_Pos) | - ((uint32_t)ptpconfig->TimestampMaster << ETH_PTPTSCR_TSSMRME_Pos) | - ((uint32_t)ptpconfig->TimestampFilter << ETH_PTPTSCR_TSPFFMAE_Pos) | - ((uint32_t)ptpconfig->TimestampClockType << ETH_PTPTSCR_TSCNT_Pos); - - /* Write to MACTSCR */ - MODIFY_REG(heth->Instance->PTPTSCR, ETH_MACTSCR_MASK, tmpTSCR); - - /* Enable Timestamp */ - SET_BIT(heth->Instance->PTPTSCR, ETH_PTPTSCR_TSE); - WRITE_REG(heth->Instance->PTPSSIR, ptpconfig->TimestampSubsecondInc); - WRITE_REG(heth->Instance->PTPTSAR, ptpconfig->TimestampAddend); - - /* Enable Timestamp */ - if (ptpconfig->TimestampAddendUpdate == ENABLE) - { - SET_BIT(heth->Instance->PTPTSCR, ETH_PTPTSCR_TSARU); - while ((heth->Instance->PTPTSCR & ETH_PTPTSCR_TSARU) != 0) {} - } - - /* Enable Update mode */ - if (ptpconfig->TimestampUpdateMode == ENABLE) - { - SET_BIT(heth->Instance->PTPTSCR, ETH_PTPTSCR_TSFCU); - } - - /* Initialize Time */ - time.Seconds = 0; - time.NanoSeconds = 0; - HAL_ETH_PTP_SetTime(heth, &time); - - /* Ptp Init */ - SET_BIT(heth->Instance->PTPTSCR, ETH_PTPTSCR_TSSTI); - - /* Set PTP Configuration done */ - heth->IsPtpConfigured = HAL_ETH_PTP_CONFIGURATED; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Get the Ethernet PTP configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains - * the configuration information for PTP - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) -{ - if (ptpconfig == NULL) - { - return HAL_ERROR; - } - ptpconfig->Timestamp = READ_BIT(heth->Instance->PTPTSCR, ETH_PTPTSCR_TSE); - ptpconfig->TimestampUpdate = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSFCU) >> ETH_PTPTSCR_TSFCU_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampAll = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSARFE) >> ETH_PTPTSCR_TSSARFE_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampRolloverMode = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSSR) >> ETH_PTPTSCR_TSSSR_Pos) > 0U) - ? ENABLE : DISABLE; - ptpconfig->TimestampV2 = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSPTPPSV2E) >> ETH_PTPTSCR_TSPTPPSV2E_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampEthernet = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSPTPOEFE) >> ETH_PTPTSCR_TSSPTPOEFE_Pos) > 0U) - ? ENABLE : DISABLE; - ptpconfig->TimestampIPv6 = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSIPV6FE) >> ETH_PTPTSCR_TSSIPV6FE_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampIPv4 = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSIPV4FE) >> ETH_PTPTSCR_TSSIPV4FE_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampEvent = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSEME) >> ETH_PTPTSCR_TSSEME_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampMaster = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSSMRME) >> ETH_PTPTSCR_TSSMRME_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampFilter = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSPFFMAE) >> ETH_PTPTSCR_TSPFFMAE_Pos) > 0U) ? ENABLE : DISABLE; - ptpconfig->TimestampClockType = ((READ_BIT(heth->Instance->PTPTSCR, - ETH_PTPTSCR_TSCNT) >> ETH_PTPTSCR_TSCNT_Pos) > 0U) ? ENABLE : DISABLE; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Set Seconds and Nanoseconds for the Ethernet PTP registers. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param heth: pointer to a ETH_TimeTypeDef structure that contains - * time to set - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) -{ - if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) - { - /* Set Seconds */ - heth->Instance->PTPTSHUR = time->Seconds; - - /* Set NanoSeconds */ - heth->Instance->PTPTSLUR = time->NanoSeconds; - - /* Return function status */ - return HAL_OK; - } - else - { - /* Return function status */ - return HAL_ERROR; - } -} - -/** - * @brief Get Seconds and Nanoseconds for the Ethernet PTP registers. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param heth: pointer to a ETH_TimeTypeDef structure that contains - * time to get - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) -{ - if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) - { - /* Get Seconds */ - time->Seconds = heth->Instance->PTPTSHR; - - /* Get NanoSeconds */ - time->NanoSeconds = heth->Instance->PTPTSLR; - - /* Return function status */ - return HAL_OK; - } - else - { - /* Return function status */ - return HAL_ERROR; - } -} - -/** - * @brief Update time for the Ethernet PTP registers. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param timeupdate: pointer to a ETH_TIMEUPDATETypeDef structure that contains - * the time update information - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, - ETH_TimeTypeDef *timeoffset) -{ - if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) - { - if (ptpoffsettype == HAL_ETH_PTP_NEGATIVE_UPDATE) - { - /* Set Seconds update */ - heth->Instance->PTPTSHUR = ETH_PTPTSHR_VALUE - timeoffset->Seconds + 1U; - - if (READ_BIT(heth->Instance->PTPTSCR, ETH_PTPTSCR_TSSSR) == ETH_PTPTSCR_TSSSR) - { - /* Set nanoSeconds update */ - heth->Instance->PTPTSLUR = ETH_PTPTSLR_VALUE - timeoffset->NanoSeconds; - } - else - { - heth->Instance->PTPTSLUR = ETH_PTPTSHR_VALUE - timeoffset->NanoSeconds + 1U; - } - } - else - { - /* Set Seconds update */ - heth->Instance->PTPTSHUR = timeoffset->Seconds; - /* Set nanoSeconds update */ - heth->Instance->PTPTSLUR = timeoffset->NanoSeconds; - } - - /* Return function status */ - return HAL_OK; - } - else - { - /* Return function status */ - return HAL_ERROR; - } -} - -/** - * @brief Insert Timestamp in transmission. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param txtimestampconf: Enable or Disable timestamp in transmission - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth) -{ - ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; - uint32_t descidx = dmatxdesclist->CurTxDesc; - ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; - - if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) - { - /* Enable Time Stamp transmission */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_TTSE); - - /* Return function status */ - return HAL_OK; - } - else - { - /* Return function status */ - return HAL_ERROR; - } -} - -/** - * @brief Get transmission timestamp. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains - * transmission timestamp - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) -{ - ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; - uint32_t idx = dmatxdesclist->releaseIndex; - ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[idx]; - - if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) - { - /* Get timestamp low */ - timestamp->TimeStampLow = dmatxdesc->DESC0; - /* Get timestamp high */ - timestamp->TimeStampHigh = dmatxdesc->DESC1; - - /* Return function status */ - return HAL_OK; - } - else - { - /* Return function status */ - return HAL_ERROR; - } -} - -/** - * @brief Get receive timestamp. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains - * receive timestamp - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) -{ - if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURATED) - { - /* Get timestamp low */ - timestamp->TimeStampLow = heth->RxDescList.TimeStamp.TimeStampLow; - /* Get timestamp high */ - timestamp->TimeStampHigh = heth->RxDescList.TimeStamp.TimeStampHigh; - - /* Return function status */ - return HAL_OK; - } - else - { - /* Return function status */ - return HAL_ERROR; - } -} - -/** - * @brief Register the Tx Ptp callback. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param txPtpCallback: Function to handle Ptp transmission - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback) -{ - if (txPtpCallback == NULL) - { - /* No buffer to save */ - return HAL_ERROR; - } - /* Set Function to handle Tx Ptp */ - heth->txPtpCallback = txPtpCallback; - - return HAL_OK; -} - -/** - * @brief Unregister the Tx Ptp callback. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth) -{ - /* Set function to allocate buffer */ - heth->txPtpCallback = HAL_ETH_TxPtpCallback; - - return HAL_OK; -} - -/** - * @brief Tx Ptp callback. - * @param buff: pointer to application buffer - * @retval None - */ -__weak void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(buff); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_TxPtpCallback could be implemented in the user file - */ -} -#endif /* HAL_ETH_USE_PTP */ - -/** - * @brief This function handles ETH interrupt request. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth) -{ - /* Packet received */ - if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMASR_RS)) - { - if (__HAL_ETH_DMA_GET_IT_SOURCE(heth, ETH_DMAIER_RIE)) - { - /* Clear the Eth DMA Rx IT pending bits */ - __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMASR_RS | ETH_DMASR_NIS); - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /*Call registered Receive complete callback*/ - heth->RxCpltCallback(heth); -#else - /* Receive complete callback */ - HAL_ETH_RxCpltCallback(heth); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - } - } - - /* Packet transmitted */ - if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMASR_TS)) - { - if (__HAL_ETH_DMA_GET_IT_SOURCE(heth, ETH_DMAIER_TIE)) - { - /* Clear the Eth DMA Tx IT pending bits */ - __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMASR_TS | ETH_DMASR_NIS); - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /*Call registered Transmit complete callback*/ - heth->TxCpltCallback(heth); -#else - /* Transfer complete callback */ - HAL_ETH_TxCpltCallback(heth); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - } - } - - - /* ETH DMA Error */ - if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMASR_AIS)) - { - if (__HAL_ETH_DMA_GET_IT_SOURCE(heth, ETH_DMAIER_AISE)) - { - heth->ErrorCode |= HAL_ETH_ERROR_DMA; - - /* if fatal bus error occurred */ - if (__HAL_ETH_DMA_GET_IT(heth, ETH_DMASR_FBES)) - { - /* Get DMA error code */ - heth->DMAErrorCode = READ_BIT(heth->Instance->DMASR, (ETH_DMASR_FBES | ETH_DMASR_TPS | ETH_DMASR_RPS)); - - /* Disable all interrupts */ - __HAL_ETH_DMA_DISABLE_IT(heth, ETH_DMAIER_NISE | ETH_DMAIER_AISE); - - /* Set HAL state to ERROR */ - heth->gState = HAL_ETH_STATE_ERROR; - } - else - { - /* Get DMA error status */ - heth->DMAErrorCode = READ_BIT(heth->Instance->DMASR, (ETH_DMASR_ETS | ETH_DMASR_RWTS | - ETH_DMASR_RBUS | ETH_DMASR_AIS)); - - /* Clear the interrupt summary flag */ - __HAL_ETH_DMA_CLEAR_IT(heth, (ETH_DMASR_ETS | ETH_DMASR_RWTS | - ETH_DMASR_RBUS | ETH_DMASR_AIS)); - } -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /* Call registered Error callback*/ - heth->ErrorCallback(heth); -#else - /* Ethernet DMA Error callback */ - HAL_ETH_ErrorCallback(heth); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - - } - } - - - /* ETH PMT IT */ - if (__HAL_ETH_MAC_GET_IT(heth, ETH_MAC_PMT_IT)) - { - /* Get MAC Wake-up source and clear the status register pending bit */ - heth->MACWakeUpEvent = READ_BIT(heth->Instance->MACPMTCSR, (ETH_MACPMTCSR_WFR | ETH_MACPMTCSR_MPR)); - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /* Call registered PMT callback*/ - heth->PMTCallback(heth); -#else - /* Ethernet PMT callback */ - HAL_ETH_PMTCallback(heth); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - - heth->MACWakeUpEvent = (uint32_t)(0x0U); - } - - - /* check ETH WAKEUP exti flag */ - if (__HAL_ETH_WAKEUP_EXTI_GET_FLAG(ETH_WAKEUP_EXTI_LINE) != (uint32_t)RESET) - { - /* Clear ETH WAKEUP Exti pending bit */ - __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) - /* Call registered WakeUp callback*/ - heth->WakeUpCallback(heth); -#else - /* ETH WAKEUP callback */ - HAL_ETH_WakeUpCallback(heth); -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Tx Transfer completed callbacks. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callbacks. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Ethernet transfer error callbacks - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief Ethernet Power Management module IT callback - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_PMTCallback could be implemented in the user file - */ -} - - -/** - * @brief ETH WAKEUP interrupt callback - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_WakeUpCallback could be implemented in the user file - */ -} - -/** - * @brief Read a PHY register - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param PHYAddr: PHY port address, must be a value from 0 to 31 - * @param PHYReg: PHY register address, must be a value from 0 to 31 - * @param pRegValue: parameter to hold read value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, - uint32_t *pRegValue) -{ - uint32_t tmpreg1; - uint32_t tickstart; - - /* Get the ETHERNET MACMIIAR value */ - tmpreg1 = heth->Instance->MACMIIAR; - - /* Keep only the CSR Clock Range CR[2:0] bits value */ - tmpreg1 &= ~ETH_MACMIIAR_CR_MASK; - - /* Prepare the MII address register value */ - tmpreg1 |= ((PHYAddr << 11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */ - tmpreg1 |= (((uint32_t)PHYReg << 6U) & ETH_MACMIIAR_MR); /* Set the PHY register address */ - tmpreg1 &= ~ETH_MACMIIAR_MW; /* Set the read mode */ - tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */ - - /* Write the result value into the MII Address register */ - heth->Instance->MACMIIAR = tmpreg1; - - - tickstart = HAL_GetTick(); - - /* Check for the Busy flag */ - while ((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > PHY_READ_TO) - { - return HAL_ERROR; - } - - tmpreg1 = heth->Instance->MACMIIAR; - } - - /* Get MACMIIDR value */ - *pRegValue = (uint16_t)(heth->Instance->MACMIIDR); - - return HAL_OK; -} - - -/** - * @brief Writes to a PHY register. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param PHYAddr: PHY port address, must be a value from 0 to 31 - * @param PHYReg: PHY register address, must be a value from 0 to 31 - * @param RegValue: the value to write - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, - uint32_t RegValue) -{ - uint32_t tmpreg1; - uint32_t tickstart; - - /* Get the ETHERNET MACMIIAR value */ - tmpreg1 = heth->Instance->MACMIIAR; - - /* Keep only the CSR Clock Range CR[2:0] bits value */ - tmpreg1 &= ~ETH_MACMIIAR_CR_MASK; - - /* Prepare the MII register address value */ - tmpreg1 |= ((PHYAddr << 11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */ - tmpreg1 |= (((uint32_t)PHYReg << 6U) & ETH_MACMIIAR_MR); /* Set the PHY register address */ - tmpreg1 |= ETH_MACMIIAR_MW; /* Set the write mode */ - tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */ - - /* Give the value to the MII data register */ - heth->Instance->MACMIIDR = (uint16_t)RegValue; - - /* Write the result value into the MII Address register */ - heth->Instance->MACMIIAR = tmpreg1; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check for the Busy flag */ - while ((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > PHY_WRITE_TO) - { - return HAL_ERROR; - } - - tmpreg1 = heth->Instance->MACMIIAR; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions - * @brief ETH control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the ETH - peripheral. - -@endverbatim - * @{ - */ -/** - * @brief Get the configuration of the MAC and MTL subsystems. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param macconf: pointer to a ETH_MACConfigTypeDef structure that will hold - * the configuration of the MAC. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_ETH_GetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) -{ - if (macconf == NULL) - { - return HAL_ERROR; - } - - /* Get MAC parameters */ - macconf->DeferralCheck = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DC) >> 4) > 0U) ? ENABLE : DISABLE; - macconf->BackOffLimit = READ_BIT(heth->Instance->MACCR, ETH_MACCR_BL); - macconf->RetryTransmission = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_RD) >> 9) == 0U) ? ENABLE : DISABLE; - macconf->CarrierSenseDuringTransmit = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_CSD) >> 16) > 0U) - ? ENABLE : DISABLE; - macconf->ReceiveOwn = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_ROD) >> 13) == 0U) ? ENABLE : DISABLE; - macconf->LoopbackMode = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_LM) >> 12) > 0U) ? ENABLE : DISABLE; - macconf->DuplexMode = READ_BIT(heth->Instance->MACCR, ETH_MACCR_DM); - macconf->Speed = READ_BIT(heth->Instance->MACCR, ETH_MACCR_FES); - macconf->Jabber = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JD) >> 22) == 0U) ? ENABLE : DISABLE; - macconf->Watchdog = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_WD) >> 23) == 0U) ? ENABLE : DISABLE; - macconf->AutomaticPadCRCStrip = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_APCS) >> 7) > 0U) ? ENABLE : DISABLE; - macconf->InterPacketGapVal = READ_BIT(heth->Instance->MACCR, ETH_MACCR_IFG); - macconf->ChecksumOffload = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPCO) >> 10U) > 0U) ? ENABLE : DISABLE; - - - macconf->TransmitFlowControl = ((READ_BIT(heth->Instance->MACFCR, ETH_MACFCR_TFCE) >> 1) > 0U) ? ENABLE : DISABLE; - macconf->ZeroQuantaPause = ((READ_BIT(heth->Instance->MACFCR, ETH_MACFCR_ZQPD) >> 7) == 0U) ? ENABLE : DISABLE; - macconf->PauseLowThreshold = READ_BIT(heth->Instance->MACFCR, ETH_MACFCR_PLT); - macconf->PauseTime = (READ_BIT(heth->Instance->MACFCR, ETH_MACFCR_PT) >> 16); - macconf->ReceiveFlowControl = ((READ_BIT(heth->Instance->MACFCR, ETH_MACFCR_RFCE) >> 2U) > 0U) ? ENABLE : DISABLE; - macconf->UnicastPausePacketDetect = ((READ_BIT(heth->Instance->MACFCR, ETH_MACFCR_UPFD) >> 3U) > 0U) - ? ENABLE : DISABLE; - - return HAL_OK; -} - -/** - * @brief Get the configuration of the DMA. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold - * the configuration of the ETH DMA. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_ETH_GetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) -{ - if (dmaconf == NULL) - { - return HAL_ERROR; - } - - dmaconf->DMAArbitration = READ_BIT(heth->Instance->DMABMR, - (ETH_DMAARBITRATION_RXPRIORTX | ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1)); - dmaconf->AddressAlignedBeats = ((READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_AAB) >> 25U) > 0U) ? ENABLE : DISABLE; - dmaconf->BurstMode = READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_FB | ETH_DMABMR_MB); - dmaconf->RxDMABurstLength = READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_RDP); - dmaconf->TxDMABurstLength = READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_PBL); - dmaconf->EnhancedDescriptorFormat = ((READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_EDE) >> 7) > 0U) ? ENABLE : DISABLE; - dmaconf->DescriptorSkipLength = READ_BIT(heth->Instance->DMABMR, ETH_DMABMR_DSL) >> 2; - - dmaconf->DropTCPIPChecksumErrorFrame = ((READ_BIT(heth->Instance->DMAOMR, - ETH_DMAOMR_DTCEFD) >> 26) > 0U) ? DISABLE : ENABLE; - dmaconf->ReceiveStoreForward = ((READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_RSF) >> 25) > 0U) ? ENABLE : DISABLE; - dmaconf->FlushRxPacket = ((READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_FTF) >> 20) > 0U) ? DISABLE : ENABLE; - dmaconf->TransmitStoreForward = ((READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_TSF) >> 21) > 0U) ? ENABLE : DISABLE; - dmaconf->TransmitThresholdControl = READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_TTC); - dmaconf->ForwardErrorFrames = ((READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_FEF) >> 7) > 0U) ? ENABLE : DISABLE; - dmaconf->ForwardUndersizedGoodFrames = ((READ_BIT(heth->Instance->DMAOMR, - ETH_DMAOMR_FUGF) >> 6) > 0U) ? ENABLE : DISABLE; - dmaconf->ReceiveThresholdControl = READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_RTC); - dmaconf->SecondFrameOperate = ((READ_BIT(heth->Instance->DMAOMR, ETH_DMAOMR_OSF) >> 2) > 0U) ? ENABLE : DISABLE; - return HAL_OK; -} - -/** - * @brief Set the MAC configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param macconf: pointer to a ETH_MACConfigTypeDef structure that contains - * the configuration of the MAC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) -{ - if (macconf == NULL) - { - return HAL_ERROR; - } - - if (heth->gState == HAL_ETH_STATE_READY) - { - ETH_SetMACConfig(heth, macconf); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Set the ETH DMA configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold - * the configuration of the ETH DMA. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) -{ - if (dmaconf == NULL) - { - return HAL_ERROR; - } - - if (heth->gState == HAL_ETH_STATE_READY) - { - ETH_SetDMAConfig(heth, dmaconf); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Configures the Clock range of ETH MDIO interface. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth) -{ - uint32_t hclk; - uint32_t tmpreg; - - /* Get the ETHERNET MACMIIAR value */ - tmpreg = (heth->Instance)->MACMIIAR; - /* Clear CSR Clock Range CR[2:0] bits */ - tmpreg &= ETH_MACMIIAR_CR_MASK; - - /* Get hclk frequency value */ - hclk = HAL_RCC_GetHCLKFreq(); - - /* Set CR bits depending on hclk value */ - if ((hclk >= 20000000U) && (hclk < 35000000U)) - { - /* CSR Clock Range between 20-35 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div16; - } - else if ((hclk >= 35000000U) && (hclk < 60000000U)) - { - /* CSR Clock Range between 35-60 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div26; - } - else if ((hclk >= 60000000U) && (hclk < 100000000U)) - { - /* CSR Clock Range between 60-100 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div42; - } - else if ((hclk >= 100000000U) && (hclk < 150000000U)) - { - /* CSR Clock Range between 100-150 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div62; - } - else /* ((hclk >= 150000000)&&(hclk <= 183000000))*/ - { - /* CSR Clock Range between 150-183 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div102; - } - - /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */ - (heth->Instance)->MACMIIAR = (uint32_t)tmpreg; -} - -/** - * @brief Set the ETH MAC (L2) Filters configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that contains - * the configuration of the ETH MAC filters. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig) -{ - uint32_t filterconfig; - uint32_t tmpreg1; - - if (pFilterConfig == NULL) - { - return HAL_ERROR; - } - - filterconfig = ((uint32_t)pFilterConfig->PromiscuousMode | - ((uint32_t)pFilterConfig->HashUnicast << 1) | - ((uint32_t)pFilterConfig->HashMulticast << 2) | - ((uint32_t)pFilterConfig->DestAddrInverseFiltering << 3) | - ((uint32_t)pFilterConfig->PassAllMulticast << 4) | - ((uint32_t)((pFilterConfig->BroadcastFilter == DISABLE) ? 1U : 0U) << 5) | - ((uint32_t)pFilterConfig->SrcAddrInverseFiltering << 8) | - ((uint32_t)pFilterConfig->SrcAddrFiltering << 9) | - ((uint32_t)pFilterConfig->HachOrPerfectFilter << 10) | - ((uint32_t)pFilterConfig->ReceiveAllMode << 31) | - pFilterConfig->ControlPacketsFilter); - - MODIFY_REG(heth->Instance->MACFFR, ETH_MACFFR_MASK, filterconfig); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACFFR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACFFR = tmpreg1; - - return HAL_OK; -} - -/** - * @brief Get the ETH MAC (L2) Filters configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that will hold - * the configuration of the ETH MAC filters. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig) -{ - if (pFilterConfig == NULL) - { - return HAL_ERROR; - } - - pFilterConfig->PromiscuousMode = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_PM)) > 0U) ? ENABLE : DISABLE; - pFilterConfig->HashUnicast = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_HU) >> 1) > 0U) ? ENABLE : DISABLE; - pFilterConfig->HashMulticast = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_HM) >> 2) > 0U) ? ENABLE : DISABLE; - pFilterConfig->DestAddrInverseFiltering = ((READ_BIT(heth->Instance->MACFFR, - ETH_MACFFR_DAIF) >> 3) > 0U) ? ENABLE : DISABLE; - pFilterConfig->PassAllMulticast = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_PAM) >> 4) > 0U) ? ENABLE : DISABLE; - pFilterConfig->BroadcastFilter = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_BFD) >> 5) == 0U) ? ENABLE : DISABLE; - pFilterConfig->ControlPacketsFilter = READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_PCF); - pFilterConfig->SrcAddrInverseFiltering = ((READ_BIT(heth->Instance->MACFFR, - ETH_MACFFR_SAIF) >> 8) > 0U) ? ENABLE : DISABLE; - pFilterConfig->SrcAddrFiltering = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_SAF) >> 9) > 0U) ? ENABLE : DISABLE; - pFilterConfig->HachOrPerfectFilter = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_HPF) >> 10) > 0U) - ? ENABLE : DISABLE; - pFilterConfig->ReceiveAllMode = ((READ_BIT(heth->Instance->MACFFR, ETH_MACFFR_RA) >> 31) > 0U) ? ENABLE : DISABLE; - - return HAL_OK; -} - -/** - * @brief Set the source MAC Address to be matched. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param AddrNbr: The MAC address to configure - * This parameter must be a value of the following: - * ETH_MAC_ADDRESS1 - * ETH_MAC_ADDRESS2 - * ETH_MAC_ADDRESS3 - * @param pMACAddr: Pointer to MAC address buffer data (6 bytes) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(ETH_HandleTypeDef *heth, uint32_t AddrNbr, uint8_t *pMACAddr) -{ - uint32_t macaddrlr; - uint32_t macaddrhr; - - if (pMACAddr == NULL) - { - return HAL_ERROR; - } - - /* Get mac addr high reg offset */ - macaddrhr = ((uint32_t) &(heth->Instance->MACA0HR) + AddrNbr); - /* Get mac addr low reg offset */ - macaddrlr = ((uint32_t) &(heth->Instance->MACA0LR) + AddrNbr); - - /* Set MAC addr bits 32 to 47 */ - (*(__IO uint32_t *)macaddrhr) = (((uint32_t)(pMACAddr[5]) << 8) | (uint32_t)pMACAddr[4]); - /* Set MAC addr bits 0 to 31 */ - (*(__IO uint32_t *)macaddrlr) = (((uint32_t)(pMACAddr[3]) << 24) | ((uint32_t)(pMACAddr[2]) << 16) | - ((uint32_t)(pMACAddr[1]) << 8) | (uint32_t)pMACAddr[0]); - - /* Enable address and set source address bit */ - (*(__IO uint32_t *)macaddrhr) |= (ETH_MACA1HR_AE | ETH_MACA1HR_SA); - - return HAL_OK; -} - -/** - * @brief Set the ETH Hash Table Value. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pHashTable: pointer to a table of two 32 bit values, that contains - * the 64 bits of the hash table. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable) -{ - uint32_t tmpreg1; - if (pHashTable == NULL) - { - return HAL_ERROR; - } - - heth->Instance->MACHTHR = pHashTable[0]; - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACHTHR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACHTHR = tmpreg1; - - heth->Instance->MACHTLR = pHashTable[1]; - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACHTLR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACHTLR = tmpreg1; - - return HAL_OK; -} - -/** - * @brief Set the VLAN Identifier for Rx packets - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param ComparisonBits: 12 or 16 bit comparison mode - must be a value of @ref ETH_VLAN_Tag_Comparison - * @param VLANIdentifier: VLAN Identifier value - * @retval None - */ -void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, uint32_t VLANIdentifier) -{ - uint32_t tmpreg1; - MODIFY_REG(heth->Instance->MACVLANTR, ETH_MACVLANTR_VLANTI, VLANIdentifier); - if (ComparisonBits == ETH_VLANTAGCOMPARISON_16BIT) - { - CLEAR_BIT(heth->Instance->MACVLANTR, ETH_MACVLANTR_VLANTC); - } - else - { - SET_BIT(heth->Instance->MACVLANTR, ETH_MACVLANTR_VLANTC); - } - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACVLANTR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACVLANTR = tmpreg1; -} - -/** - * @brief Enters the Power down mode. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pPowerDownConfig: a pointer to ETH_PowerDownConfigTypeDef structure - * that contains the Power Down configuration - * @retval None. - */ -void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, ETH_PowerDownConfigTypeDef *pPowerDownConfig) -{ - uint32_t powerdownconfig; - - powerdownconfig = (((uint32_t)pPowerDownConfig->MagicPacket << ETH_MACPMTCSR_MPE_Pos) | - ((uint32_t)pPowerDownConfig->WakeUpPacket << ETH_MACPMTCSR_WFE_Pos) | - ((uint32_t)pPowerDownConfig->GlobalUnicast << ETH_MACPMTCSR_GU_Pos) | - ETH_MACPMTCSR_PD); - - MODIFY_REG(heth->Instance->MACPMTCSR, ETH_MACPMTCSR_MASK, powerdownconfig); -} - -/** - * @brief Exits from the Power down mode. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None. - */ -void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg1; - - /* clear wake up sources */ - CLEAR_BIT(heth->Instance->MACPMTCSR, ETH_MACPMTCSR_WFE | ETH_MACPMTCSR_MPE | ETH_MACPMTCSR_GU); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACPMTCSR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACPMTCSR = tmpreg1; - - if (READ_BIT(heth->Instance->MACPMTCSR, ETH_MACPMTCSR_PD) != 0U) - { - /* Exit power down mode */ - CLEAR_BIT(heth->Instance->MACPMTCSR, ETH_MACPMTCSR_PD); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACPMTCSR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACPMTCSR = tmpreg1; - } - - /* Disable PMT interrupt */ - SET_BIT(heth->Instance->MACIMR, ETH_MACIMR_PMTIM); -} - -/** - * @brief Set the WakeUp filter. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pFilter: pointer to filter registers values - * @param Count: number of filter registers, must be from 1 to 8. - * @retval None. - */ -HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count) -{ - uint32_t regindex; - - if (pFilter == NULL) - { - return HAL_ERROR; - } - - /* Reset Filter Pointer */ - SET_BIT(heth->Instance->MACPMTCSR, ETH_MACPMTCSR_WFFRPR); - - /* Wake up packet filter config */ - for (regindex = 0; regindex < Count; regindex++) - { - /* Write filter regs */ - WRITE_REG(heth->Instance->MACRWUFFR, pFilter[regindex]); - } - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup ETH_Exported_Functions_Group4 Peripheral State and Errors functions - * @brief ETH State and Errors functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Errors functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to return the State of - ETH communication process, return Peripheral Errors occurred during communication - process - - -@endverbatim - * @{ - */ - -/** - * @brief Returns the ETH state. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL state - */ -HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth) -{ - return heth->gState; -} - -/** - * @brief Returns the ETH error code - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval ETH Error Code - */ -uint32_t HAL_ETH_GetError(ETH_HandleTypeDef *heth) -{ - return heth->ErrorCode; -} - -/** - * @brief Returns the ETH DMA error code - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval ETH DMA Error Code - */ -uint32_t HAL_ETH_GetDMAError(ETH_HandleTypeDef *heth) -{ - return heth->DMAErrorCode; -} - -/** - * @brief Returns the ETH MAC error code - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval ETH MAC Error Code - */ -uint32_t HAL_ETH_GetMACError(ETH_HandleTypeDef *heth) -{ - return heth->MACErrorCode; -} - -/** - * @brief Returns the ETH MAC WakeUp event source - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval ETH MAC WakeUp event source - */ -uint32_t HAL_ETH_GetMACWakeUpSource(ETH_HandleTypeDef *heth) -{ - return heth->MACWakeUpEvent; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup ETH_Private_Functions ETH Private Functions - * @{ - */ - -/** - * @brief Clears the ETHERNET transmit FIFO. - * @param heth pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth) -{ - __IO uint32_t tmpreg = 0; - - /* Set the Flush Transmit FIFO bit */ - (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF; - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = (heth->Instance)->DMAOMR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->DMAOMR = tmpreg; -} - -static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) -{ - uint32_t tmpreg1; - - /*------------------------ ETHERNET MACCR Configuration --------------------*/ - /* Get the ETHERNET MACCR value */ - tmpreg1 = (heth->Instance)->MACCR; - /* Clear WD, PCE, PS, TE and RE bits */ - tmpreg1 &= ETH_MACCR_CLEAR_MASK; - - tmpreg1 |= (uint32_t)(((uint32_t)((macconf->Watchdog == DISABLE) ? 1U : 0U) << 23U) | - ((uint32_t)((macconf->Jabber == DISABLE) ? 1U : 0U) << 22U) | - (uint32_t)macconf->InterPacketGapVal | - ((uint32_t)macconf->CarrierSenseDuringTransmit << 16U) | - macconf->Speed | - ((uint32_t)((macconf->ReceiveOwn == DISABLE) ? 1U : 0U) << 13U) | - ((uint32_t)macconf->LoopbackMode << 12U) | - macconf->DuplexMode | - ((uint32_t)macconf->ChecksumOffload << 10U) | - ((uint32_t)((macconf->RetryTransmission == DISABLE) ? 1U : 0U) << 9U) | - ((uint32_t)macconf->AutomaticPadCRCStrip << 7U) | - macconf->BackOffLimit | - ((uint32_t)macconf->DeferralCheck << 4U)); - - /* Write to ETHERNET MACCR */ - (heth->Instance)->MACCR = (uint32_t)tmpreg1; - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACCR = tmpreg1; - - /*----------------------- ETHERNET MACFCR Configuration --------------------*/ - - /* Get the ETHERNET MACFCR value */ - tmpreg1 = (heth->Instance)->MACFCR; - /* Clear xx bits */ - tmpreg1 &= ETH_MACFCR_CLEAR_MASK; - - tmpreg1 |= (uint32_t)((macconf->PauseTime << 16U) | - ((uint32_t)((macconf->ZeroQuantaPause == DISABLE) ? 1U : 0U) << 7U) | - macconf->PauseLowThreshold | - ((uint32_t)((macconf->UnicastPausePacketDetect == ENABLE) ? 1U : 0U) << 3U) | - ((uint32_t)((macconf->ReceiveFlowControl == ENABLE) ? 1U : 0U) << 2U) | - ((uint32_t)((macconf->TransmitFlowControl == ENABLE) ? 1U : 0U) << 1U)); - - /* Write to ETHERNET MACFCR */ - (heth->Instance)->MACFCR = (uint32_t)tmpreg1; - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->MACFCR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->MACFCR = tmpreg1; -} - -static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) -{ - uint32_t tmpreg1; - - /*----------------------- ETHERNET DMAOMR Configuration --------------------*/ - /* Get the ETHERNET DMAOMR value */ - tmpreg1 = (heth->Instance)->DMAOMR; - /* Clear xx bits */ - tmpreg1 &= ETH_DMAOMR_CLEAR_MASK; - - tmpreg1 |= (uint32_t)(((uint32_t)((dmaconf->DropTCPIPChecksumErrorFrame == DISABLE) ? 1U : 0U) << 26U) | - ((uint32_t)dmaconf->ReceiveStoreForward << 25U) | - ((uint32_t)((dmaconf->FlushRxPacket == DISABLE) ? 1U : 0U) << 20U) | - ((uint32_t)dmaconf->TransmitStoreForward << 21U) | - dmaconf->TransmitThresholdControl | - ((uint32_t)dmaconf->ForwardErrorFrames << 7U) | - ((uint32_t)dmaconf->ForwardUndersizedGoodFrames << 6U) | - dmaconf->ReceiveThresholdControl | - ((uint32_t)dmaconf->SecondFrameOperate << 2U)); - - /* Write to ETHERNET DMAOMR */ - (heth->Instance)->DMAOMR = (uint32_t)tmpreg1; - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->DMAOMR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->DMAOMR = tmpreg1; - - /*----------------------- ETHERNET DMABMR Configuration --------------------*/ - (heth->Instance)->DMABMR = (uint32_t)(((uint32_t)dmaconf->AddressAlignedBeats << 25U) | - dmaconf->BurstMode | - dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or - Rx it is applied for the other */ - dmaconf->TxDMABurstLength | - ((uint32_t)dmaconf->EnhancedDescriptorFormat << 7U) | - (dmaconf->DescriptorSkipLength << 2U) | - dmaconf->DMAArbitration | - ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */ - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg1 = (heth->Instance)->DMABMR; - HAL_Delay(ETH_REG_WRITE_DELAY); - (heth->Instance)->DMABMR = tmpreg1; -} - -/** - * @brief Configures Ethernet MAC and DMA with default parameters. - * called by HAL_ETH_Init() API. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth) -{ - ETH_MACConfigTypeDef macDefaultConf; - ETH_DMAConfigTypeDef dmaDefaultConf; - - /*--------------- ETHERNET MAC registers default Configuration --------------*/ - macDefaultConf.Watchdog = ENABLE; - macDefaultConf.Jabber = ENABLE; - macDefaultConf.InterPacketGapVal = ETH_INTERFRAMEGAP_96BIT; - macDefaultConf.CarrierSenseDuringTransmit = DISABLE; - macDefaultConf.ReceiveOwn = ENABLE; - macDefaultConf.LoopbackMode = DISABLE; - macDefaultConf.ChecksumOffload = ENABLE; - macDefaultConf.RetryTransmission = DISABLE; - macDefaultConf.AutomaticPadCRCStrip = DISABLE; - macDefaultConf.BackOffLimit = ETH_BACKOFFLIMIT_10; - macDefaultConf.DeferralCheck = DISABLE; - macDefaultConf.PauseTime = 0x0U; - macDefaultConf.ZeroQuantaPause = DISABLE; - macDefaultConf.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4; - macDefaultConf.ReceiveFlowControl = DISABLE; - macDefaultConf.TransmitFlowControl = DISABLE; - macDefaultConf.Speed = ETH_SPEED_100M; - macDefaultConf.DuplexMode = ETH_FULLDUPLEX_MODE; - macDefaultConf.UnicastPausePacketDetect = DISABLE; - - /* MAC default configuration */ - ETH_SetMACConfig(heth, &macDefaultConf); - - /*--------------- ETHERNET DMA registers default Configuration --------------*/ - dmaDefaultConf.DropTCPIPChecksumErrorFrame = ENABLE; - dmaDefaultConf.ReceiveStoreForward = ENABLE; - dmaDefaultConf.FlushRxPacket = ENABLE; - dmaDefaultConf.TransmitStoreForward = ENABLE; - dmaDefaultConf.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES; - dmaDefaultConf.ForwardErrorFrames = DISABLE; - dmaDefaultConf.ForwardUndersizedGoodFrames = DISABLE; - dmaDefaultConf.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES; - dmaDefaultConf.SecondFrameOperate = ENABLE; - dmaDefaultConf.AddressAlignedBeats = ENABLE; - dmaDefaultConf.BurstMode = ETH_BURSTLENGTH_FIXED; - dmaDefaultConf.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT; - dmaDefaultConf.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT; - dmaDefaultConf.EnhancedDescriptorFormat = ENABLE; - dmaDefaultConf.DescriptorSkipLength = 0x0U; - dmaDefaultConf.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1; - - /* DMA default configuration */ - ETH_SetDMAConfig(heth, &dmaDefaultConf); -} - -/** - * @brief Configures the selected MAC address. - * @param heth pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param MacAddr The MAC address to configure - * This parameter can be one of the following values: - * @arg ETH_MAC_Address0: MAC Address0 - * @arg ETH_MAC_Address1: MAC Address1 - * @arg ETH_MAC_Address2: MAC Address2 - * @arg ETH_MAC_Address3: MAC Address3 - * @param Addr Pointer to MAC address buffer data (6 bytes) - * @retval HAL status - */ -static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr) -{ - uint32_t tmpreg1; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(heth); - - /* Calculate the selected MAC address high register */ - tmpreg1 = ((uint32_t)Addr[5U] << 8U) | (uint32_t)Addr[4U]; - /* Load the selected MAC address high register */ - (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg1; - /* Calculate the selected MAC address low register */ - tmpreg1 = ((uint32_t)Addr[3U] << 24U) | ((uint32_t)Addr[2U] << 16U) | ((uint32_t)Addr[1U] << 8U) | Addr[0U]; - - /* Load the selected MAC address low register */ - (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg1; -} - -/** - * @brief Initializes the DMA Tx descriptors. - * called by HAL_ETH_Init() API. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth) -{ - ETH_DMADescTypeDef *dmatxdesc; - uint32_t i; - - /* Fill each DMATxDesc descriptor with the right values */ - for (i = 0; i < (uint32_t)ETH_TX_DESC_CNT; i++) - { - dmatxdesc = heth->Init.TxDesc + i; - - WRITE_REG(dmatxdesc->DESC0, 0x0); - WRITE_REG(dmatxdesc->DESC1, 0x0); - WRITE_REG(dmatxdesc->DESC2, 0x0); - WRITE_REG(dmatxdesc->DESC3, 0x0); - - WRITE_REG(heth->TxDescList.TxDesc[i], (uint32_t)dmatxdesc); - - /* Set Second Address Chained bit */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_TCH); - - if (i < ((uint32_t)ETH_TX_DESC_CNT - 1U)) - { - WRITE_REG(dmatxdesc->DESC3, (uint32_t)(heth->Init.TxDesc + i + 1U)); - } - else - { - WRITE_REG(dmatxdesc->DESC3, (uint32_t)(heth->Init.TxDesc)); - } - - /* Set the DMA Tx descriptors checksum insertion */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL); - } - - heth->TxDescList.CurTxDesc = 0; - - /* Set Transmit Descriptor List Address */ - WRITE_REG(heth->Instance->DMATDLAR, (uint32_t) heth->Init.TxDesc); -} - -/** - * @brief Initializes the DMA Rx descriptors in chain mode. - * called by HAL_ETH_Init() API. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth) -{ - ETH_DMADescTypeDef *dmarxdesc; - uint32_t i; - - for (i = 0; i < (uint32_t)ETH_RX_DESC_CNT; i++) - { - dmarxdesc = heth->Init.RxDesc + i; - - WRITE_REG(dmarxdesc->DESC0, 0x0); - WRITE_REG(dmarxdesc->DESC1, 0x0); - WRITE_REG(dmarxdesc->DESC2, 0x0); - WRITE_REG(dmarxdesc->DESC3, 0x0); - WRITE_REG(dmarxdesc->BackupAddr0, 0x0); - WRITE_REG(dmarxdesc->BackupAddr1, 0x0); - - /* Set Own bit of the Rx descriptor Status */ - dmarxdesc->DESC0 = ETH_DMARXDESC_OWN; - - /* Set Buffer1 size and Second Address Chained bit */ - dmarxdesc->DESC1 = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE; - - /* Enable Ethernet DMA Rx Descriptor interrupt */ - dmarxdesc->DESC1 &= ~ETH_DMARXDESC_DIC; - - /* Set Rx descritors addresses */ - WRITE_REG(heth->RxDescList.RxDesc[i], (uint32_t)dmarxdesc); - - if (i < ((uint32_t)ETH_RX_DESC_CNT - 1U)) - { - WRITE_REG(dmarxdesc->DESC3, (uint32_t)(heth->Init.RxDesc + i + 1U)); - } - else - { - WRITE_REG(dmarxdesc->DESC3, (uint32_t)(heth->Init.RxDesc)); - } - } - - WRITE_REG(heth->RxDescList.RxDescIdx, 0); - WRITE_REG(heth->RxDescList.RxDescCnt, 0); - WRITE_REG(heth->RxDescList.RxBuildDescIdx, 0); - WRITE_REG(heth->RxDescList.RxBuildDescCnt, 0); - WRITE_REG(heth->RxDescList.ItMode, 0); - - /* Set Receive Descriptor List Address */ - WRITE_REG(heth->Instance->DMARDLAR, (uint32_t) heth->Init.RxDesc); -} - -/** - * @brief Prepare Tx DMA descriptor before transmission. - * called by HAL_ETH_Transmit_IT and HAL_ETH_Transmit_IT() API. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param pTxConfig: Tx packet configuration - * @param ItMode: Enable or disable Tx EOT interrept - * @retval Status - */ -static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, ETH_TxPacketConfig *pTxConfig, uint32_t ItMode) -{ - ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; - uint32_t descidx = dmatxdesclist->CurTxDesc; - uint32_t firstdescidx = dmatxdesclist->CurTxDesc; - uint32_t idx; - uint32_t descnbr = 0; - ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; - - ETH_BufferTypeDef *txbuffer = pTxConfig->TxBuffer; - uint32_t bd_count = 0; - - /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ - if ((READ_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_OWN) == ETH_DMATXDESC_OWN) - || (dmatxdesclist->PacketAddress[descidx] != NULL)) - { - return HAL_ETH_ERROR_BUSY; - } - - - descnbr += 1U; - - /* Set header or buffer 1 address */ - WRITE_REG(dmatxdesc->DESC2, (uint32_t)txbuffer->buffer); - - /* Set header or buffer 1 Length */ - MODIFY_REG(dmatxdesc->DESC1, ETH_DMATXDESC_TBS1, txbuffer->len); - - if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != 0U) - { - MODIFY_REG(dmatxdesc->DESC0, ETH_DMATXDESC_CIC, pTxConfig->ChecksumCtrl); - } - - if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CRCPAD) != 0U) - { - MODIFY_REG(dmatxdesc->DESC0, ETH_CRC_PAD_DISABLE, pTxConfig->CRCPadCtrl); - } - - - if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != 0U) - { - /* Set Vlan Type */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_VF); - } - - /* Mark it as First Descriptor */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_FS); - - /* Ensure rest of descriptor is written to RAM before the OWN bit */ - __DMB(); - /* set OWN bit of FIRST descriptor */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_OWN); - - /* only if the packet is split into more than one descriptors > 1 */ - while (txbuffer->next != NULL) - { - /* Clear the LD bit of previous descriptor */ - CLEAR_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_LS); - if (ItMode != ((uint32_t)RESET)) - { - /* Set Interrupt on completion bit */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_IC); - } - else - { - /* Clear Interrupt on completion bit */ - CLEAR_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_IC); - } - /* Increment current tx descriptor index */ - INCR_TX_DESC_INDEX(descidx, 1U); - /* Get current descriptor address */ - dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; - - /* Clear the FD bit of new Descriptor */ - CLEAR_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_FS); - - /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ - if ((READ_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_OWN) == ETH_DMATXDESC_OWN) - || (dmatxdesclist->PacketAddress[descidx] != NULL)) - { - descidx = firstdescidx; - dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; - - /* clear previous desc own bit */ - for (idx = 0; idx < descnbr; idx ++) - { - /* Ensure rest of descriptor is written to RAM before the OWN bit */ - __DMB(); - - CLEAR_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_OWN); - - /* Increment current tx descriptor index */ - INCR_TX_DESC_INDEX(descidx, 1U); - /* Get current descriptor address */ - dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; - } - - return HAL_ETH_ERROR_BUSY; - } - - descnbr += 1U; - - /* Get the next Tx buffer in the list */ - txbuffer = txbuffer->next; - - /* Set header or buffer 1 address */ - WRITE_REG(dmatxdesc->DESC2, (uint32_t)txbuffer->buffer); - - /* Set header or buffer 1 Length */ - MODIFY_REG(dmatxdesc->DESC1, ETH_DMATXDESC_TBS1, txbuffer->len); - - bd_count += 1U; - - /* Ensure rest of descriptor is written to RAM before the OWN bit */ - __DMB(); - /* Set Own bit */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_OWN); - } - - if (ItMode != ((uint32_t)RESET)) - { - /* Set Interrupt on completion bit */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_IC); - } - else - { - /* Clear Interrupt on completion bit */ - CLEAR_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_IC); - } - - /* Mark it as LAST descriptor */ - SET_BIT(dmatxdesc->DESC0, ETH_DMATXDESC_LS); - /* Save the current packet address to expose it to the application */ - dmatxdesclist->PacketAddress[descidx] = dmatxdesclist->CurrentPacketAddress; - - dmatxdesclist->CurTxDesc = descidx; - - /* disable the interrupt */ - __disable_irq(); - - dmatxdesclist->BuffersInUse += bd_count + 1U; - - /* Enable interrupts back */ - __enable_irq(); - - - /* Return function status */ - return HAL_ETH_ERROR_NONE; -} - -#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) -static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth) -{ - /* Init the ETH Callback settings */ - heth->TxCpltCallback = HAL_ETH_TxCpltCallback; /* Legacy weak TxCpltCallback */ - heth->RxCpltCallback = HAL_ETH_RxCpltCallback; /* Legacy weak RxCpltCallback */ - heth->ErrorCallback = HAL_ETH_ErrorCallback; /* Legacy weak ErrorCallback */ - heth->PMTCallback = HAL_ETH_PMTCallback; /* Legacy weak PMTCallback */ - heth->WakeUpCallback = HAL_ETH_WakeUpCallback; /* Legacy weak WakeUpCallback */ - heth->rxLinkCallback = HAL_ETH_RxLinkCallback; /* Legacy weak RxLinkCallback */ - heth->txFreeCallback = HAL_ETH_TxFreeCallback; /* Legacy weak TxFreeCallback */ -#ifdef HAL_ETH_USE_PTP - heth->txPtpCallback = HAL_ETH_TxPtpCallback; /* Legacy weak TxPtpCallback */ -#endif /* HAL_ETH_USE_PTP */ - heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; /* Legacy weak RxAllocateCallback */ -} -#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* ETH */ - -#endif /* HAL_ETH_MODULE_ENABLED */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c deleted file mode 100644 index 2830da0..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c +++ /dev/null @@ -1,775 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.c - * @author MCD Application Team - * @brief FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the internal FLASH memory: - * + Program operations functions - * + Memory Control functions - * + Peripheral Errors functions - * - @verbatim - ============================================================================== - ##### FLASH peripheral features ##### - ============================================================================== - - [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses - to the Flash memory. It implements the erase and program Flash memory operations - and the read and write protection mechanisms. - - [..] The Flash memory interface accelerates code execution with a system of instruction - prefetch and cache lines. - - [..] The FLASH main features are: - (+) Flash memory read operations - (+) Flash memory program/erase operations - (+) Read / write protections - (+) Prefetch on I-Code - (+) 64 cache lines of 128 bits on I-Code - (+) 8 cache lines of 128 bits on D-Code - - - ##### How to use this driver ##### - ============================================================================== - [..] - This driver provides functions and macros to configure and program the FLASH - memory of all STM32F4xx devices. - - (#) FLASH Memory IO Programming functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Program functions: byte, half word, word and double word - (++) There Two modes of programming : - (+++) Polling mode using HAL_FLASH_Program() function - (+++) Interrupt mode using HAL_FLASH_Program_IT() function - - (#) Interrupts and flags management functions : - (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() - (++) Wait for last FLASH operation according to its status - (++) Get error flag status by calling HAL_SetErrorCode() - - [..] - In addition to these functions, this driver includes a set of macros allowing - to handle the following operations: - (+) Set the latency - (+) Enable/Disable the prefetch buffer - (+) Enable/Disable the Instruction cache and the Data cache - (+) Reset the Instruction cache and the Data cache - (+) Enable/Disable the FLASH interrupts - (+) Monitor the FLASH flags status - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH FLASH - * @brief FLASH HAL module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Variables - * @{ - */ -/* Variable used for Erase sectors under interruption */ -FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASH_Private_Functions - * @{ - */ -/* Program operations */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); -static void FLASH_Program_Word(uint32_t Address, uint32_t Data); -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data); -static void FLASH_SetErrorCode(void); - -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Functions FLASH Exported Functions - * @{ - */ - -/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions - * @brief Programming operation functions - * -@verbatim - =============================================================================== - ##### Programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FLASH - program operations. - -@endverbatim - * @{ - */ - -/** - * @brief Program byte, halfword, word or double word at a specified address - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - } - else - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled. - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; - pFlash.Address = Address; - - if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - } - else - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - } - - return status; -} - -/** - * @brief This function handles FLASH interrupt request. - * @retval None - */ -void HAL_FLASH_IRQHandler(void) -{ - uint32_t addresstmp = 0U; - - /* Check FLASH operation error flags */ -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) -#else - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) -#endif /* FLASH_SR_RDERR */ - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) - { - /*return the faulty sector*/ - addresstmp = pFlash.Sector; - pFlash.Sector = 0xFFFFFFFFU; - } - else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /*return the faulty bank*/ - addresstmp = pFlash.Bank; - } - else - { - /*return the faulty address*/ - addresstmp = pFlash.Address; - } - - /*Save the Error code*/ - FLASH_SetErrorCode(); - - /* FLASH error interrupt user callback */ - HAL_FLASH_OperationErrorCallback(addresstmp); - - /*Stop the procedure ongoing*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - - /* Check FLASH End of Operation flag */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - - if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) - { - /*Nb of sector to erased can be decreased*/ - pFlash.NbSectorsToErase--; - - /* Check if there are still sectors to erase*/ - if(pFlash.NbSectorsToErase != 0U) - { - addresstmp = pFlash.Sector; - /*Indicate user which sector has been erased*/ - HAL_FLASH_EndOfOperationCallback(addresstmp); - - /*Increment sector number*/ - pFlash.Sector++; - addresstmp = pFlash.Sector; - FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase); - } - else - { - /*No more sectors to Erase, user callback can be called.*/ - /*Reset Sector and stop Erase sectors procedure*/ - pFlash.Sector = addresstmp = 0xFFFFFFFFU; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(addresstmp); - } - } - else - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /* MassErase ended. Return the selected bank */ - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Bank); - } - else - { - /*Program ended. Return the selected address*/ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - - if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) - { - /* Operation is completed, disable the PG, SER, SNB and MER Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT)); - - /* Disable End of FLASH Operation interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP); - - /* Disable Error source interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR); - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - } -} - -/** - * @brief FLASH end of operation interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Sectors Erase: Sector which has been erased - * (if 0xFFFFFFFFU, it means that all the selected sectors have been erased) - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_EndOfOperationCallback could be implemented in the user file - */ -} - -/** - * @brief FLASH operation error interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Sectors Erase: Sector number which returned an error - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_OperationErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - memory operations. - -@endverbatim - * @{ - */ - -/** - * @brief Unlock the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - /* Authorize the FLASH Registers access */ - WRITE_REG(FLASH->KEYR, FLASH_KEY1); - WRITE_REG(FLASH->KEYR, FLASH_KEY2); - - /* Verify Flash is unlocked */ - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief Locks the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - FLASH->CR |= FLASH_CR_LOCK; - - return HAL_OK; -} - -/** - * @brief Unlock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) -{ - if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) - { - /* Authorizes the Option Byte register programming */ - FLASH->OPTKEYR = FLASH_OPT_KEY1; - FLASH->OPTKEYR = FLASH_OPT_KEY2; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Lock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) -{ - /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ - FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; - - return HAL_OK; -} - -/** - * @brief Launch the option byte loading. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) -{ - /* Set the OPTSTRT bit in OPTCR register */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; - - /* Wait for last operation to be completed */ - return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time Errors of the FLASH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Get the specific FLASH error flag. - * @retval FLASH_ErrorCode: The returned value can be a combination of: - * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) - * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag - * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag - * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag - * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag - * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag - */ -uint32_t HAL_FLASH_GetError(void) -{ - return pFlash.ErrorCode; -} - -/** - * @} - */ - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout maximum flash operationtimeout - * @retval HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Clear Error Code */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) - { - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - } -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) -#else - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) -#endif /* FLASH_SR_RDERR */ - { - /*Save the error code*/ - FLASH_SetErrorCode(); - return HAL_ERROR; - } - - /* If there is no error flag set */ - return HAL_OK; - -} - -/** - * @brief Program a double word (64-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V and Vpp in the range 7V to 9V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; - FLASH->CR |= FLASH_CR_PG; - - /* Program first word */ - *(__IO uint32_t*)Address = (uint32_t)Data; - - /* Barrier to ensure programming is performed in 2 steps, in right order - (independently of compiler optimization behavior) */ - __ISB(); - - /* Program second word */ - *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32); -} - - -/** - * @brief Program word (32-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Word(uint32_t Address, uint32_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint32_t*)Address = Data; -} - -/** - * @brief Program a half-word (16-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.1V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_HALF_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint16_t*)Address = Data; -} - -/** - * @brief Program byte (8-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 1.8V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_BYTE; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint8_t*)Address = Data; -} - -/** - * @brief Set the specific FLASH error flag. - * @retval None - */ -static void FLASH_SetErrorCode(void) -{ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; - - /* Clear FLASH write protection error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; - - /* Clear FLASH Programming alignment error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP; - - /* Clear FLASH Programming parallelism error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS; - - /* Clear FLASH Programming sequence error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR); - } -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; - - /* Clear FLASH Proprietary readout protection error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR); - } -#endif /* FLASH_SR_RDERR */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION; - - /* Clear FLASH Operation error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR); - } -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c deleted file mode 100644 index d99eace..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c +++ /dev/null @@ -1,1347 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.c - * @author MCD Application Team - * @brief Extended FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the FLASH extension peripheral: - * + Extended programming operations functions - * - @verbatim - ============================================================================== - ##### Flash Extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and - STM32F429xx/439xx devices contains the following additional features - - (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write - capability (RWW) - (+) Dual bank memory organization - (+) PCROP protection for all banks - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx - devices. It includes - (#) FLASH Memory Erase functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Erase function: Erase sector, erase all sectors - (++) There are two modes of erase : - (+++) Polling Mode using HAL_FLASHEx_Erase() - (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() - - (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to : - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Set the BOR level - (++) Program the user Option Bytes - (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to : - (++) Extended space (bank 2) erase function - (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2) - (++) Dual Boot activation - (++) Write protection configuration for bank 2 - (++) PCROP protection configuration and control for both banks - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASHEx FLASHEx - * @brief FLASH HAL Extension module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Variables - * @{ - */ -extern FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Functions - * @{ - */ -/* Option bytes control */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby); -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level); -static uint8_t FLASH_OB_GetUser(void); -static uint16_t FLASH_OB_GetWRP(void); -static uint8_t FLASH_OB_GetRDP(void); -static uint8_t FLASH_OB_GetBOR(void); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector); -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions - * @{ - */ - -/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions - * @brief Extended IO operation functions - * -@verbatim - =============================================================================== - ##### Extended programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the Extension FLASH - programming operations. - -@endverbatim - * @{ - */ -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors - * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @param[out] SectorError pointer to variable that - * contains the configuration information on faulty sector in case of error - * (0xFFFFFFFFU means that all the sectors have been correctly erased) - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) -{ - HAL_StatusTypeDef status = HAL_ERROR; - uint32_t index = 0U; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Initialization of SectorError variable*/ - *SectorError = 0xFFFFFFFFU; - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_MER_BIT); - } - else - { - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - /* Erase by sector by sector to be done*/ - for (index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) - { - FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the SER and SNB Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB)); - - if (status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty sector*/ - *SectorError = index; - break; - } - } - } - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches(); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled - * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - /* Clear pending flags (if any) */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \ - FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; - pFlash.Bank = pEraseInit->Banks; - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); - } - else - { - /* Erase by sector to be done*/ - - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE; - pFlash.NbSectorsToErase = pEraseInit->NbSectors; - pFlash.Sector = pEraseInit->Sector; - pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange; - - /*Erase 1st sector and wait for IT*/ - FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange); - } - - return status; -} - -/** - * @brief Program option bytes - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); - - /*Write protection configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) - { - assert_param(IS_WRPSTATE(pOBInit->WRPState)); - if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ - status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks); - } - else - { - /*Disable of Write protection on the selected Sector*/ - status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks); - } - } - - /*Read protection configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) - { - status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); - } - - /*USER configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) - { - status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_IWDG_SW, - pOBInit->USERConfig & OB_STOP_NO_RST, - pOBInit->USERConfig & OB_STDBY_NO_RST); - } - - /*BOR Level configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) - { - status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Get the Option byte configuration - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) -{ - pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR; - - /*Get WRP*/ - pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP(); - - /*Get RDP Level*/ - pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP(); - - /*Get USER*/ - pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser(); - - /*Get BOR Level*/ - pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR(); -} - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Program option bytes - * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Check the parameters */ - assert_param(IS_OBEX(pAdvOBInit->OptionType)); - - /*Program PCROP option byte*/ - if (((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) - { - /* Check the parameters */ - assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState)); - if ((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - } - else - { - /*Disable of Write protection on the selected Sector*/ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - } - } - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - /*Program BOOT config option byte*/ - if (((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) - { - status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig); - } -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - - return status; -} - -/** - * @brief Get the OBEX byte configuration - * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) -{ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /*Get Sector*/ - pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - /*Get Sector for Bank1*/ - pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); - - /*Get Sector for Bank2*/ - pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); - - /*Get Boot config OB*/ - pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS; -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ -} - -/** - * @brief Select the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ - * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) -{ - uint8_t optiontmp = 0xFF; - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp); - - return HAL_OK; -} - -/** - * @brief Deselect the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ - * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) -{ - uint8_t optiontmp = 0xFF; - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp); - - return HAL_OK; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\ - STM32F411xE || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2 - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices. - * @retval The FLASH Write Protection Option Bytes value - */ -uint16_t HAL_FLASHEx_OB_GetBank2WRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Full erase of FLASH memory sectors - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* if the previous operation is completed, proceed to erase all sectors */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - - if (Banks == FLASH_BANK_BOTH) - { - /* bank1 & bank2 will be erased*/ - FLASH->CR |= FLASH_MER_BIT; - } - else if (Banks == FLASH_BANK_1) - { - /*Only bank1 will be erased*/ - FLASH->CR |= FLASH_CR_MER1; - } - else - { - /*Only bank2 will be erased*/ - FLASH->CR |= FLASH_CR_MER2; - } - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0U; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if (VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */ - if (Sector > FLASH_SECTOR_11) - { - Sector += 4U; - } - /* If the previous operation is completed, proceed to erase the sector */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; -} - -/** - * @brief Enable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 - * @arg OB_WRP_SECTOR_All - * @note BANK2 starts from OB_WRP_SECTOR_12 - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL FLASH State - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) - { - if (WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } - } - else - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - - /*Write protection on all sector of BANK2*/ - if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - } - - } - return status; -} - -/** - * @brief Disable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 - * @arg OB_WRP_Sector_All - * @note BANK2 starts from OB_WRP_SECTOR_12 - * - * @param Banks Disable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) - { - if (WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } - } - else - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - - /*Write protection on all sector of BANK2*/ - if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - } - - } - - return status; -} - -/** - * @brief Configure the Dual Bank Boot. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param BootConfig specifies the Dual Bank Boot Option byte. - * This parameter can be one of the following values: - * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable - * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled - * @retval None - */ -static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_BOOT(BootConfig)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Set Dual Bank Boot */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig; - } - - return status; -} - -/** - * @brief Enable the read/write protection (PCROP) of the desired - * sectors of Bank 1 and/or Bank 2. - * @note This function can be used only for STM32F42xxx/43xxx devices. - * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All - * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All - * @param Banks Enable PCROP protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) - { - assert_param(IS_OB_PCROP(SectorBank1)); - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1; - } - else - { - assert_param(IS_OB_PCROP(SectorBank2)); - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; - } - - /*Write protection on all sector of BANK2*/ - if (Banks == FLASH_BANK_BOTH) - { - assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; - } - } - - } - - return status; -} - - -/** - * @brief Disable the read/write protection (PCROP) of the desired - * sectors of Bank 1 and/or Bank 2. - * @note This function can be used only for STM32F42xxx/43xxx devices. - * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All - * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All - * @param Banks Disable PCROP protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) - { - assert_param(IS_OB_PCROP(SectorBank1)); - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~SectorBank1); - } - else - { - /*Write protection done on sectors of BANK2*/ - assert_param(IS_OB_PCROP(SectorBank2)); - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); - } - - /*Write protection on all sector of BANK2*/ - if (Banks == FLASH_BANK_BOTH) - { - assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); - } - } - - } - - return status; - -} - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -/** - * @brief Mass erase of FLASH memory - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * - * @retval None - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* If the previous operation is completed, proceed to erase all sectors */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_CR_MER; - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0U; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if (VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* If the previous operation is completed, proceed to erase the sector */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; -} - -/** - * @brief Enable the write protection of the desired bank 1 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } - - return status; -} - -/** - * @brief Disable the write protection of the desired bank 1 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } - - return status; -} -#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Enable the read/write protection (PCROP) of the desired sectors. - * @note This function can be used only for STM32F401xx devices. - * @param Sector specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector; - } - - return status; -} - - -/** - * @brief Disable the read/write protection (PCROP) of the desired sectors. - * @note This function can be used only for STM32F401xx devices. - * @param Sector specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~Sector); - } - - return status; - -} -#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -/** - * @brief Set the read protection level. - * @param Level specifies the read protection level. - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - * - * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_RDP_LEVEL(Level)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint8_t *)OPTCR_BYTE1_ADDRESS = Level; - } - - return status; -} - -/** - * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param Iwdg Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param Stop Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NO_RST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param Stdby Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby) -{ - uint8_t optiontmp = 0xFF; - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(Iwdg)); - assert_param(IS_OB_STOP_SOURCE(Stop)); - assert_param(IS_OB_STDBY_SOURCE(Stdby)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); - - /* Update User Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp))); - } - - return status; -} - -/** - * @brief Set the BOR Level. - * @param Level specifies the Option Bytes BOR Reset Level. - * This parameter can be one of the following values: - * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level) -{ - /* Check the parameters */ - assert_param(IS_OB_BOR_LEVEL(Level)); - - /* Set the BOR Level */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level; - - return HAL_OK; - -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1) - * and RST_STDBY(Bit2). - */ -static uint8_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return ((uint8_t)(FLASH->OPTCR & 0xE0)); -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * @retval uint16_t FLASH Write Protection Option Bytes value - */ -static uint16_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH Read Protection level. - * @retval FLASH ReadOut Protection Status: - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - */ -static uint8_t FLASH_OB_GetRDP(void) -{ - uint8_t readstatus = OB_RDP_LEVEL_0; - - if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2) - { - readstatus = OB_RDP_LEVEL_2; - } - else if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_0) - { - readstatus = OB_RDP_LEVEL_0; - } - else - { - readstatus = OB_RDP_LEVEL_1; - } - - return readstatus; -} - -/** - * @brief Returns the FLASH BOR level. - * @retval uint8_t The FLASH BOR level: - * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V - */ -static uint8_t FLASH_OB_GetBOR(void) -{ - /* Return the FLASH BOR level */ - return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C); -} - -/** - * @brief Flush the instruction and data caches - * @retval None - */ -void FLASH_FlushCaches(void) -{ - /* Flush instruction cache */ - if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != RESET) - { - /* Disable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); - /* Reset instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_RESET(); - /* Enable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); - } - - /* Flush data cache */ - if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - /* Reset data cache */ - __HAL_FLASH_DATA_CACHE_RESET(); - /* Enable data cache */ - __HAL_FLASH_DATA_CACHE_ENABLE(); - } -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c deleted file mode 100644 index 952595b..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c +++ /dev/null @@ -1,172 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.c - * @author MCD Application Team - * @brief FLASH RAMFUNC module driver. - * This file provides a FLASH firmware functions which should be - * executed from internal SRAM - * + Stop/Start the flash interface while System Run - * + Enable/Disable the flash sleep while System Run - @verbatim - ============================================================================== - ##### APIs executed from Internal RAM ##### - ============================================================================== - [..] - *** ARM Compiler *** - -------------------- - [..] RAM functions are defined using the toolchain options. - Functions that are be executed in RAM should reside in a separate - source module. Using the 'Options for File' dialog you can simply change - the 'Code / Const' area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the - Options for Target' dialog. - - *** ICCARM Compiler *** - ----------------------- - [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". - - *** GNU Compiler *** - -------------------- - [..] RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC - * @brief FLASH functions executed from RAM - * @{ - */ -#ifdef HAL_FLASH_MODULE_ENABLED -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions - * @{ - */ - -/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### ramfunc functions ##### - =============================================================================== - [..] - This subsection provides a set of functions that should be executed from RAM - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Stop the flash interface while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Stop the flash interface while System Run */ - SET_BIT(PWR->CR, PWR_CR_FISSR); - - return HAL_OK; -} - -/** - * @brief Start the flash interface while System Run - * @note This mode is only available for STM32F411xx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Start the flash interface while System Run */ - CLEAR_BIT(PWR->CR, PWR_CR_FISSR); - - return HAL_OK; -} - -/** - * @brief Enable the flash sleep while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode could n't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the flash sleep while System Run */ - SET_BIT(PWR->CR, PWR_CR_FMSSR); - - return HAL_OK; -} - -/** - * @brief Disable the flash sleep while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Disable the flash sleep while System Run */ - CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -#endif /* HAL_FLASH_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c deleted file mode 100644 index d079dd0..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c +++ /dev/null @@ -1,6864 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpi2c.c - * @author MCD Application Team - * @brief FMPI2C HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Inter Integrated Circuit (FMPI2C) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The FMPI2C HAL driver can be used as follows: - - (#) Declare a FMPI2C_HandleTypeDef handle structure, for example: - FMPI2C_HandleTypeDef hfmpi2c; - - (#)Initialize the FMPI2C low level resources by implementing the HAL_FMPI2C_MspInit() API: - (##) Enable the FMPI2Cx interface clock - (##) FMPI2C pins configuration - (+++) Enable the clock for the FMPI2C GPIOs - (+++) Configure FMPI2C pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the FMPI2Cx interrupt priority - (+++) Enable the NVIC FMPI2C IRQ Channel - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for - the transmit or receive stream - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx stream - (+++) Associate the initialized DMA handle to the hfmpi2c DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx stream - - (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, - Own Address2, Own Address2 Mask, General call and Nostretch mode in the hfmpi2c Init structure. - - (#) Initialize the FMPI2C registers by calling the HAL_FMPI2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_FMPI2C_MspInit(&hfmpi2c) API. - - (#) To check if target device is ready for communication, use the function HAL_FMPI2C_IsDeviceReady() - - (#) For FMPI2C IO and IO MEM operations, three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Transmit in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Receive() - - *** Polling mode IO MEM operation *** - ===================================== - [..] - (+) Write an amount of data in blocking mode to a specific memory address using HAL_FMPI2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using HAL_FMPI2C_Mem_Read() - - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Transmit_IT() - (+) At transmission end of transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Receive_IT() - (+) At reception end of transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Transmit_IT() - (+) At transmission end of transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Receive_IT() - (+) At reception end of transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_ErrorCallback() - (+) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT() - (+) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback() - (+) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - - *** Interrupt mode or DMA mode IO sequential operation *** - ========================================================== - [..] - (@) These interfaces allow to manage a sequential transfer with a repeated start condition - when a direction change during transfer - [..] - (+) A specific option field manage the different steps of a sequential transfer - (+) Option field values are defined through FMPI2C_XFEROPTIONS and are listed below: - (++) FMPI2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in - no sequential mode - (++) FMPI2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition - (++) FMPI2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with - start condition, address and data to transfer without a final stop condition, - an then permit a call the same master sequential interface several times - (like HAL_FMPI2C_Master_Seq_Transmit_IT() then HAL_FMPI2C_Master_Seq_Transmit_IT() - or HAL_FMPI2C_Master_Seq_Transmit_DMA() then HAL_FMPI2C_Master_Seq_Transmit_DMA()) - (++) FMPI2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to - transfer - if no direction change and without a final stop condition in both cases - (++) FMPI2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to - transfer - if no direction change and with a final stop condition in both cases - (++) FMPI2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition - after several call of the same master sequential interface several times - (link with option FMPI2C_FIRST_AND_NEXT_FRAME). - Usage can, transfer several bytes one by one using - HAL_FMPI2C_Master_Seq_Transmit_IT - or HAL_FMPI2C_Master_Seq_Receive_IT - or HAL_FMPI2C_Master_Seq_Transmit_DMA - or HAL_FMPI2C_Master_Seq_Receive_DMA - with option FMPI2C_FIRST_AND_NEXT_FRAME then FMPI2C_NEXT_FRAME. - Then usage of this option FMPI2C_LAST_FRAME_NO_STOP at the last Transmit or - Receive sequence permit to call the opposite interface Receive or Transmit - without stopping the communication and so generate a restart condition. - (++) FMPI2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after - each call of the same master sequential - interface. - Usage can, transfer several bytes one by one with a restart with slave address between - each bytes using - HAL_FMPI2C_Master_Seq_Transmit_IT - or HAL_FMPI2C_Master_Seq_Receive_IT - or HAL_FMPI2C_Master_Seq_Transmit_DMA - or HAL_FMPI2C_Master_Seq_Receive_DMA - with option FMPI2C_FIRST_FRAME then FMPI2C_OTHER_FRAME. - Then usage of this option FMPI2C_OTHER_AND_LAST_FRAME at the last frame to help automatic - generation of STOP condition. - - (+) Different sequential FMPI2C interfaces are listed below: - (++) Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode using - HAL_FMPI2C_Master_Seq_Transmit_IT() or using HAL_FMPI2C_Master_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and - users can add their own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback() - (++) Sequential receive in master FMPI2C mode an amount of data in non-blocking mode using - HAL_FMPI2C_Master_Seq_Receive_IT() or using HAL_FMPI2C_Master_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT() - (+++) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback() - (++) Enable/disable the Address listen mode in slave FMPI2C mode using HAL_FMPI2C_EnableListen_IT() - HAL_FMPI2C_DisableListen_IT() - (+++) When address slave FMPI2C match, HAL_FMPI2C_AddrCallback() is executed and users can - add their own code to check the Address Match Code and the transmission direction request by master - (Write/Read). - (+++) At Listen mode end HAL_FMPI2C_ListenCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_ListenCpltCallback() - (++) Sequential transmit in slave FMPI2C mode an amount of data in non-blocking mode using - HAL_FMPI2C_Slave_Seq_Transmit_IT() or using HAL_FMPI2C_Slave_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and - users can add their own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback() - (++) Sequential receive in slave FMPI2C mode an amount of data in non-blocking mode using - HAL_FMPI2C_Slave_Seq_Receive_IT() or using HAL_FMPI2C_Slave_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback() - (++) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_ErrorCallback() - (++) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** Interrupt mode IO MEM operation *** - ======================================= - [..] - (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using - HAL_FMPI2C_Mem_Write_IT() - (+) At Memory end of write transfer, HAL_FMPI2C_MemTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using - HAL_FMPI2C_Mem_Read_IT() - (+) At Memory end of read transfer, HAL_FMPI2C_MemRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using - HAL_FMPI2C_Master_Transmit_DMA() - (+) At transmission end of transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode (DMA) using - HAL_FMPI2C_Master_Receive_DMA() - (+) At reception end of transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using - HAL_FMPI2C_Slave_Transmit_DMA() - (+) At transmission end of transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using - HAL_FMPI2C_Slave_Receive_DMA() - (+) At reception end of transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_ErrorCallback() - (+) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT() - (+) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback() - (+) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** DMA mode IO MEM operation *** - ================================= - [..] - (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using - HAL_FMPI2C_Mem_Write_DMA() - (+) At Memory end of write transfer, HAL_FMPI2C_MemTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using - HAL_FMPI2C_Mem_Read_DMA() - (+) At Memory end of read transfer, HAL_FMPI2C_MemRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_FMPI2C_ErrorCallback() - - - *** FMPI2C HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in FMPI2C HAL driver. - - (+) __HAL_FMPI2C_ENABLE: Enable the FMPI2C peripheral - (+) __HAL_FMPI2C_DISABLE: Disable the FMPI2C peripheral - (+) __HAL_FMPI2C_GENERATE_NACK: Generate a Non-Acknowledge FMPI2C peripheral in Slave mode - (+) __HAL_FMPI2C_GET_FLAG: Check whether the specified FMPI2C flag is set or not - (+) __HAL_FMPI2C_CLEAR_FLAG: Clear the specified FMPI2C pending flag - (+) __HAL_FMPI2C_ENABLE_IT: Enable the specified FMPI2C interrupt - (+) __HAL_FMPI2C_DISABLE_IT: Disable the specified FMPI2C interrupt - - *** Callback registration *** - ============================================= - [..] - The compilation flag USE_HAL_FMPI2C_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_FMPI2C_RegisterCallback() or HAL_FMPI2C_RegisterAddrCallback() - to register an interrupt callback. - [..] - Function HAL_FMPI2C_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - For specific callback AddrCallback use dedicated register callbacks : HAL_FMPI2C_RegisterAddrCallback(). - [..] - Use function HAL_FMPI2C_UnRegisterCallback to reset a callback to the default - weak function. - HAL_FMPI2C_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - [..] - For callback AddrCallback use dedicated register callbacks : HAL_FMPI2C_UnRegisterAddrCallback(). - [..] - By default, after the HAL_FMPI2C_Init() and when the state is HAL_FMPI2C_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_FMPI2C_MasterTxCpltCallback(), HAL_FMPI2C_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_FMPI2C_Init()/ HAL_FMPI2C_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_FMPI2C_Init()/ HAL_FMPI2C_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - Callbacks can be registered/unregistered in HAL_FMPI2C_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_FMPI2C_STATE_READY or HAL_FMPI2C_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_FMPI2C_RegisterCallback() before calling HAL_FMPI2C_DeInit() - or HAL_FMPI2C_Init() function. - [..] - When the compilation flag USE_HAL_FMPI2C_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - [..] - (@) You can refer to the FMPI2C HAL driver header file for more useful macros - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FMPI2C FMPI2C - * @brief FMPI2C HAL module driver - * @{ - */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED -#if defined(FMPI2C_CR1_PE) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup FMPI2C_Private_Define FMPI2C Private Define - * @{ - */ -#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< FMPI2C TIMING clear register Mask */ -#define FMPI2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ -#define FMPI2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_DIR (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_TC (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_TCR (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ -#define FMPI2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ - -#define MAX_NBYTE_SIZE 255U -#define SLAVE_ADDR_SHIFT 7U -#define SLAVE_ADDR_MSK 0x06U - -/* Private define for @ref PreviousState usage */ -#define FMPI2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_FMPI2C_STATE_BUSY_TX | \ - (uint32_t)HAL_FMPI2C_STATE_BUSY_RX) & \ - (uint32_t)(~((uint32_t)HAL_FMPI2C_STATE_READY)))) -/*!< Mask State define, keep only RX and TX bits */ -#define FMPI2C_STATE_NONE ((uint32_t)(HAL_FMPI2C_MODE_NONE)) -/*!< Default Value */ -#define FMPI2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | \ - (uint32_t)HAL_FMPI2C_MODE_MASTER)) -/*!< Master Busy TX, combinaison of State LSB and Mode enum */ -#define FMPI2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | \ - (uint32_t)HAL_FMPI2C_MODE_MASTER)) -/*!< Master Busy RX, combinaison of State LSB and Mode enum */ -#define FMPI2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | \ - (uint32_t)HAL_FMPI2C_MODE_SLAVE)) -/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ -#define FMPI2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | \ - (uint32_t)HAL_FMPI2C_MODE_SLAVE)) -/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ -#define FMPI2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | \ - (uint32_t)HAL_FMPI2C_MODE_MEM)) -/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ -#define FMPI2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | \ - (uint32_t)HAL_FMPI2C_MODE_MEM)) -/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ - - -/* Private define to centralize the enable/disable of Interrupts */ -#define FMPI2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with - @ref FMPI2C_XFER_LISTEN_IT */ -#define FMPI2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with - @ref FMPI2C_XFER_LISTEN_IT */ -#define FMPI2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref FMPI2C_XFER_TX_IT - and @ref FMPI2C_XFER_RX_IT */ - -#define FMPI2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error - and NACK treatment */ -#define FMPI2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ -#define FMPI2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ - -/* Private define Sequential Transfer Options default/reset value */ -#define FMPI2C_NO_OPTION_FRAME (0xFFFF0000U) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions - * @{ - */ -/* Private functions to handle DMA transfer */ -static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); -static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); -static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); -static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); -static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma); -static void FMPI2C_DMAAbort(DMA_HandleTypeDef *hdma); - -/* Private functions to handle IT transfer */ -static void FMPI2C_ITAddrCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags); -static void FMPI2C_ITMasterSeqCplt(FMPI2C_HandleTypeDef *hfmpi2c); -static void FMPI2C_ITSlaveSeqCplt(FMPI2C_HandleTypeDef *hfmpi2c); -static void FMPI2C_ITMasterCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags); -static void FMPI2C_ITSlaveCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags); -static void FMPI2C_ITListenCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags); -static void FMPI2C_ITError(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ErrorCode); - -/* Private functions to handle IT transfer */ -static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart); - -/* Private functions for FMPI2C transfer IRQ handler */ -static HAL_StatusTypeDef FMPI2C_Master_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef FMPI2C_Slave_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef FMPI2C_Master_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef FMPI2C_Slave_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources); - -/* Private functions to handle flags during polling transfer */ -static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, - uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef FMPI2C_IsErrorOccurred(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart); - -/* Private functions to centralize the enable/disable of Interrupts */ -static void FMPI2C_Enable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest); -static void FMPI2C_Disable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest); - -/* Private function to treat different error callback */ -static void FMPI2C_TreatErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c); - -/* Private function to flush TXDR register */ -static void FMPI2C_Flush_TXDR(FMPI2C_HandleTypeDef *hfmpi2c); - -/* Private function to handle start, restart or stop a transfer */ -static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, - uint32_t Request); - -/* Private function to Convert Specific options */ -static void FMPI2C_ConvertOtherXferOptions(FMPI2C_HandleTypeDef *hfmpi2c); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup FMPI2C_Exported_Functions FMPI2C Exported Functions - * @{ - */ - -/** @defgroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the FMPI2Cx peripheral: - - (+) User must Implement HAL_FMPI2C_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_FMPI2C_Init() to configure the selected device with - the selected configuration: - (++) Clock Timing - (++) Own Address 1 - (++) Addressing mode (Master, Slave) - (++) Dual Addressing mode - (++) Own Address 2 - (++) Own Address 2 Mask - (++) General call mode - (++) Nostretch mode - - (+) Call the function HAL_FMPI2C_DeInit() to restore the default configuration - of the selected FMPI2Cx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMPI2C according to the specified parameters - * in the FMPI2C_InitTypeDef and initialize the associated handle. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Check the FMPI2C handle allocation */ - if (hfmpi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance)); - assert_param(IS_FMPI2C_OWN_ADDRESS1(hfmpi2c->Init.OwnAddress1)); - assert_param(IS_FMPI2C_ADDRESSING_MODE(hfmpi2c->Init.AddressingMode)); - assert_param(IS_FMPI2C_DUAL_ADDRESS(hfmpi2c->Init.DualAddressMode)); - assert_param(IS_FMPI2C_OWN_ADDRESS2(hfmpi2c->Init.OwnAddress2)); - assert_param(IS_FMPI2C_OWN_ADDRESS2_MASK(hfmpi2c->Init.OwnAddress2Masks)); - assert_param(IS_FMPI2C_GENERAL_CALL(hfmpi2c->Init.GeneralCallMode)); - assert_param(IS_FMPI2C_NO_STRETCH(hfmpi2c->Init.NoStretchMode)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hfmpi2c->Lock = HAL_UNLOCKED; - -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - /* Init the FMPI2C Callback settings */ - hfmpi2c->MasterTxCpltCallback = HAL_FMPI2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hfmpi2c->MasterRxCpltCallback = HAL_FMPI2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hfmpi2c->SlaveTxCpltCallback = HAL_FMPI2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hfmpi2c->SlaveRxCpltCallback = HAL_FMPI2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hfmpi2c->ListenCpltCallback = HAL_FMPI2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hfmpi2c->MemTxCpltCallback = HAL_FMPI2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - hfmpi2c->MemRxCpltCallback = HAL_FMPI2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - hfmpi2c->ErrorCallback = HAL_FMPI2C_ErrorCallback; /* Legacy weak ErrorCallback */ - hfmpi2c->AbortCpltCallback = HAL_FMPI2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hfmpi2c->AddrCallback = HAL_FMPI2C_AddrCallback; /* Legacy weak AddrCallback */ - - if (hfmpi2c->MspInitCallback == NULL) - { - hfmpi2c->MspInitCallback = HAL_FMPI2C_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - hfmpi2c->MspInitCallback(hfmpi2c); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_FMPI2C_MspInit(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY; - - /* Disable the selected FMPI2C peripheral */ - __HAL_FMPI2C_DISABLE(hfmpi2c); - - /*---------------------------- FMPI2Cx TIMINGR Configuration ------------------*/ - /* Configure FMPI2Cx: Frequency range */ - hfmpi2c->Instance->TIMINGR = hfmpi2c->Init.Timing & TIMING_CLEAR_MASK; - - /*---------------------------- FMPI2Cx OAR1 Configuration ---------------------*/ - /* Disable Own Address1 before set the Own Address1 configuration */ - hfmpi2c->Instance->OAR1 &= ~FMPI2C_OAR1_OA1EN; - - /* Configure FMPI2Cx: Own Address1 and ack own address1 mode */ - if (hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_7BIT) - { - hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | hfmpi2c->Init.OwnAddress1); - } - else /* FMPI2C_ADDRESSINGMODE_10BIT */ - { - hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | FMPI2C_OAR1_OA1MODE | hfmpi2c->Init.OwnAddress1); - } - - /*---------------------------- FMPI2Cx CR2 Configuration ----------------------*/ - /* Configure FMPI2Cx: Addressing Master mode */ - if (hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT) - { - hfmpi2c->Instance->CR2 = (FMPI2C_CR2_ADD10); - } - /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ - hfmpi2c->Instance->CR2 |= (FMPI2C_CR2_AUTOEND | FMPI2C_CR2_NACK); - - /*---------------------------- FMPI2Cx OAR2 Configuration ---------------------*/ - /* Disable Own Address2 before set the Own Address2 configuration */ - hfmpi2c->Instance->OAR2 &= ~FMPI2C_DUALADDRESS_ENABLE; - - /* Configure FMPI2Cx: Dual mode and Own Address2 */ - hfmpi2c->Instance->OAR2 = (hfmpi2c->Init.DualAddressMode | hfmpi2c->Init.OwnAddress2 | \ - (hfmpi2c->Init.OwnAddress2Masks << 8)); - - /*---------------------------- FMPI2Cx CR1 Configuration ----------------------*/ - /* Configure FMPI2Cx: Generalcall and NoStretch mode */ - hfmpi2c->Instance->CR1 = (hfmpi2c->Init.GeneralCallMode | hfmpi2c->Init.NoStretchMode); - - /* Enable the selected FMPI2C peripheral */ - __HAL_FMPI2C_ENABLE(hfmpi2c); - - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - return HAL_OK; -} - -/** - * @brief DeInitialize the FMPI2C peripheral. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Check the FMPI2C handle allocation */ - if (hfmpi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance)); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY; - - /* Disable the FMPI2C Peripheral Clock */ - __HAL_FMPI2C_DISABLE(hfmpi2c); - -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - if (hfmpi2c->MspDeInitCallback == NULL) - { - hfmpi2c->MspDeInitCallback = HAL_FMPI2C_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hfmpi2c->MspDeInitCallback(hfmpi2c); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_FMPI2C_MspDeInit(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - hfmpi2c->State = HAL_FMPI2C_STATE_RESET; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; -} - -/** - * @brief Initialize the FMPI2C MSP. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the FMPI2C MSP. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User FMPI2C Callback - * To be used instead of the weak predefined callback - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_FMPI2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_FMPI2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_FMPI2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_FMPI2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_FMPI2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_FMPI2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_RegisterCallback(FMPI2C_HandleTypeDef *hfmpi2c, HAL_FMPI2C_CallbackIDTypeDef CallbackID, - pFMPI2C_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hfmpi2c); - - if (HAL_FMPI2C_STATE_READY == hfmpi2c->State) - { - switch (CallbackID) - { - case HAL_FMPI2C_MASTER_TX_COMPLETE_CB_ID : - hfmpi2c->MasterTxCpltCallback = pCallback; - break; - - case HAL_FMPI2C_MASTER_RX_COMPLETE_CB_ID : - hfmpi2c->MasterRxCpltCallback = pCallback; - break; - - case HAL_FMPI2C_SLAVE_TX_COMPLETE_CB_ID : - hfmpi2c->SlaveTxCpltCallback = pCallback; - break; - - case HAL_FMPI2C_SLAVE_RX_COMPLETE_CB_ID : - hfmpi2c->SlaveRxCpltCallback = pCallback; - break; - - case HAL_FMPI2C_LISTEN_COMPLETE_CB_ID : - hfmpi2c->ListenCpltCallback = pCallback; - break; - - case HAL_FMPI2C_MEM_TX_COMPLETE_CB_ID : - hfmpi2c->MemTxCpltCallback = pCallback; - break; - - case HAL_FMPI2C_MEM_RX_COMPLETE_CB_ID : - hfmpi2c->MemRxCpltCallback = pCallback; - break; - - case HAL_FMPI2C_ERROR_CB_ID : - hfmpi2c->ErrorCallback = pCallback; - break; - - case HAL_FMPI2C_ABORT_CB_ID : - hfmpi2c->AbortCpltCallback = pCallback; - break; - - case HAL_FMPI2C_MSPINIT_CB_ID : - hfmpi2c->MspInitCallback = pCallback; - break; - - case HAL_FMPI2C_MSPDEINIT_CB_ID : - hfmpi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_FMPI2C_STATE_RESET == hfmpi2c->State) - { - switch (CallbackID) - { - case HAL_FMPI2C_MSPINIT_CB_ID : - hfmpi2c->MspInitCallback = pCallback; - break; - - case HAL_FMPI2C_MSPDEINIT_CB_ID : - hfmpi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpi2c); - return status; -} - -/** - * @brief Unregister an FMPI2C Callback - * FMPI2C callback is redirected to the weak predefined callback - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_FMPI2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_FMPI2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_FMPI2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_FMPI2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_FMPI2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_FMPI2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_FMPI2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_UnRegisterCallback(FMPI2C_HandleTypeDef *hfmpi2c, HAL_FMPI2C_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hfmpi2c); - - if (HAL_FMPI2C_STATE_READY == hfmpi2c->State) - { - switch (CallbackID) - { - case HAL_FMPI2C_MASTER_TX_COMPLETE_CB_ID : - hfmpi2c->MasterTxCpltCallback = HAL_FMPI2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_FMPI2C_MASTER_RX_COMPLETE_CB_ID : - hfmpi2c->MasterRxCpltCallback = HAL_FMPI2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_FMPI2C_SLAVE_TX_COMPLETE_CB_ID : - hfmpi2c->SlaveTxCpltCallback = HAL_FMPI2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_FMPI2C_SLAVE_RX_COMPLETE_CB_ID : - hfmpi2c->SlaveRxCpltCallback = HAL_FMPI2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_FMPI2C_LISTEN_COMPLETE_CB_ID : - hfmpi2c->ListenCpltCallback = HAL_FMPI2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_FMPI2C_MEM_TX_COMPLETE_CB_ID : - hfmpi2c->MemTxCpltCallback = HAL_FMPI2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - break; - - case HAL_FMPI2C_MEM_RX_COMPLETE_CB_ID : - hfmpi2c->MemRxCpltCallback = HAL_FMPI2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - break; - - case HAL_FMPI2C_ERROR_CB_ID : - hfmpi2c->ErrorCallback = HAL_FMPI2C_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_FMPI2C_ABORT_CB_ID : - hfmpi2c->AbortCpltCallback = HAL_FMPI2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_FMPI2C_MSPINIT_CB_ID : - hfmpi2c->MspInitCallback = HAL_FMPI2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_FMPI2C_MSPDEINIT_CB_ID : - hfmpi2c->MspDeInitCallback = HAL_FMPI2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_FMPI2C_STATE_RESET == hfmpi2c->State) - { - switch (CallbackID) - { - case HAL_FMPI2C_MSPINIT_CB_ID : - hfmpi2c->MspInitCallback = HAL_FMPI2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_FMPI2C_MSPDEINIT_CB_ID : - hfmpi2c->MspDeInitCallback = HAL_FMPI2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpi2c); - return status; -} - -/** - * @brief Register the Slave Address Match FMPI2C Callback - * To be used instead of the weak HAL_FMPI2C_AddrCallback() predefined callback - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_RegisterAddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, pFMPI2C_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hfmpi2c); - - if (HAL_FMPI2C_STATE_READY == hfmpi2c->State) - { - hfmpi2c->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpi2c); - return status; -} - -/** - * @brief UnRegister the Slave Address Match FMPI2C Callback - * Info Ready FMPI2C Callback is redirected to the weak HAL_FMPI2C_AddrCallback() predefined callback - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_UnRegisterAddrCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hfmpi2c); - - if (HAL_FMPI2C_STATE_READY == hfmpi2c->State) - { - hfmpi2c->AddrCallback = HAL_FMPI2C_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpi2c); - return status; -} - -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FMPI2C data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated FMPI2C IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_FMPI2C_Master_Transmit() - (++) HAL_FMPI2C_Master_Receive() - (++) HAL_FMPI2C_Slave_Transmit() - (++) HAL_FMPI2C_Slave_Receive() - (++) HAL_FMPI2C_Mem_Write() - (++) HAL_FMPI2C_Mem_Read() - (++) HAL_FMPI2C_IsDeviceReady() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_FMPI2C_Master_Transmit_IT() - (++) HAL_FMPI2C_Master_Receive_IT() - (++) HAL_FMPI2C_Slave_Transmit_IT() - (++) HAL_FMPI2C_Slave_Receive_IT() - (++) HAL_FMPI2C_Mem_Write_IT() - (++) HAL_FMPI2C_Mem_Read_IT() - (++) HAL_FMPI2C_Master_Seq_Transmit_IT() - (++) HAL_FMPI2C_Master_Seq_Receive_IT() - (++) HAL_FMPI2C_Slave_Seq_Transmit_IT() - (++) HAL_FMPI2C_Slave_Seq_Receive_IT() - (++) HAL_FMPI2C_EnableListen_IT() - (++) HAL_FMPI2C_DisableListen_IT() - (++) HAL_FMPI2C_Master_Abort_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_FMPI2C_Master_Transmit_DMA() - (++) HAL_FMPI2C_Master_Receive_DMA() - (++) HAL_FMPI2C_Slave_Transmit_DMA() - (++) HAL_FMPI2C_Slave_Receive_DMA() - (++) HAL_FMPI2C_Mem_Write_DMA() - (++) HAL_FMPI2C_Mem_Read_DMA() - (++) HAL_FMPI2C_Master_Seq_Transmit_DMA() - (++) HAL_FMPI2C_Master_Seq_Receive_DMA() - (++) HAL_FMPI2C_Slave_Seq_Transmit_DMA() - (++) HAL_FMPI2C_Slave_Seq_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_FMPI2C_MasterTxCpltCallback() - (++) HAL_FMPI2C_MasterRxCpltCallback() - (++) HAL_FMPI2C_SlaveTxCpltCallback() - (++) HAL_FMPI2C_SlaveRxCpltCallback() - (++) HAL_FMPI2C_MemTxCpltCallback() - (++) HAL_FMPI2C_MemRxCpltCallback() - (++) HAL_FMPI2C_AddrCallback() - (++) HAL_FMPI2C_ListenCpltCallback() - (++) HAL_FMPI2C_ErrorCallback() - (++) HAL_FMPI2C_AbortCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_GENERATE_START_WRITE); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_WRITE); - } - - while (hfmpi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - /* Write data to TXDR */ - hfmpi2c->Instance->TXDR = *hfmpi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferCount--; - hfmpi2c->XferSize--; - - if ((hfmpi2c->XferCount != 0U) && (hfmpi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_NO_STARTSTOP); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives in master mode an amount of data in blocking mode. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_GENERATE_START_READ); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_READ); - } - - while (hfmpi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - - if ((hfmpi2c->XferCount != 0U) && (hfmpi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_NO_STARTSTOP); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmits in slave mode an amount of data in blocking mode. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - - /* If 10bit addressing mode is selected */ - if (hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT) - { - /* Wait until ADDR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - } - - /* Wait until DIR flag is set Transmitter mode */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - while (hfmpi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Write data to TXDR */ - hfmpi2c->Instance->TXDR = *hfmpi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferCount--; - } - - /* Wait until STOP flag is set */ - if (FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - - if (hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF) - { - /* Normal use case for Transmitter mode */ - /* A NACK is generated to confirm the end of transfer */ - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - } - else - { - return HAL_ERROR; - } - } - - /* Clear STOP flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in blocking mode - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - - /* Wait until DIR flag is reset Receiver mode */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - while (hfmpi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - - /* Store Last receive data if any */ - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET) - { - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferCount--; - } - - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferCount--; - } - - /* Wait until STOP flag is set */ - if (FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear STOP flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size) -{ - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT | FMPI2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size) -{ - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with DMA - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - if (hfmpi2c->XferSize > 0U) - { - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmatx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_WRITE); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with DMA - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - if (hfmpi2c->XferSize > 0U) - { - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmarx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to read and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA; - - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmatx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with DMA - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA; - - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmarx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in blocking mode to a specific memory address - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP); - } - - do - { - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Write data to TXDR */ - hfmpi2c->Instance->TXDR = *hfmpi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferCount--; - hfmpi2c->XferSize--; - - if ((hfmpi2c->XferCount != 0U) && (hfmpi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_NO_STARTSTOP); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_NO_STARTSTOP); - } - } - - } while (hfmpi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in blocking mode from a specific memory address - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_GENERATE_START_READ); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_READ); - } - - do - { - /* Wait until RXNE flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - - if ((hfmpi2c->XferCount != 0U) && (hfmpi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t) hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, - FMPI2C_NO_STARTSTOP); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_NO_STARTSTOP); - } - } - } while (hfmpi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - - /* Check the parameters */ - assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) - != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - - /* Check the parameters */ - assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) - != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - - - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmatx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be read - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA; - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = FMPI2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmarx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Checks if target device is ready for communication. - * @note This function is used with Memory devices - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, - uint32_t Timeout) -{ - uint32_t tickstart; - - __IO uint32_t FMPI2C_Trials = 0UL; - - FlagStatus tmp1; - FlagStatus tmp2; - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - do - { - /* Generate Start */ - hfmpi2c->Instance->CR2 = FMPI2C_GENERATE_START(hfmpi2c->Init.AddressingMode, DevAddress); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set or a NACK flag is set*/ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - tmp2 = __HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - while ((tmp1 == RESET) && (tmp2 == RESET)) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - - tmp1 = __HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - tmp2 = __HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - } - - /* Check if the NACKF flag has not been set */ - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET) - { - /* Wait until STOPF flag is reset */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Device is ready */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - /* Wait until STOPF flag is reset */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Clear STOP Flag, auto generated with autoend*/ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - } - - /* Check if the maximum allowed number of trials has been reached */ - if (FMPI2C_Trials == Trials) - { - /* Generate Stop */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP; - - /* Wait until STOPF flag is reset */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - } - - /* Increment Trials */ - FMPI2C_Trials++; - } while (FMPI2C_Trials < Trials); - - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode with Interrupt. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = FMPI2C_GENERATE_START_WRITE; - - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - /* If hfmpi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = hfmpi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hfmpi2c->PreviousState == FMPI2C_STATE_MASTER_BUSY_TX) && \ - (IS_FMPI2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = FMPI2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - FMPI2C_ConvertOtherXferOptions(hfmpi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hfmpi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hfmpi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to write */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode with DMA. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = FMPI2C_GENERATE_START_WRITE; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA; - - /* If hfmpi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = hfmpi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hfmpi2c->PreviousState == FMPI2C_STATE_MASTER_BUSY_TX) && \ - (IS_FMPI2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = FMPI2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - FMPI2C_ConvertOtherXferOptions(hfmpi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hfmpi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hfmpi2c->XferOptions; - } - } - - if (hfmpi2c->XferSize > 0U) - { - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmatx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to write */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master FMPI2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = FMPI2C_GENERATE_START_READ; - - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - /* If hfmpi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = hfmpi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hfmpi2c->PreviousState == FMPI2C_STATE_MASTER_BUSY_RX) && \ - (IS_FMPI2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = FMPI2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - FMPI2C_ConvertOtherXferOptions(hfmpi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hfmpi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hfmpi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to read */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master FMPI2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Seq_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = FMPI2C_GENERATE_START_READ; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX; - hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA; - - /* If hfmpi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - xfermode = hfmpi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hfmpi2c->PreviousState == FMPI2C_STATE_MASTER_BUSY_RX) && \ - (IS_FMPI2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = FMPI2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - FMPI2C_ConvertOtherXferOptions(hfmpi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hfmpi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hfmpi2c->XferOptions; - } - } - - if (hfmpi2c->XferSize > 0U) - { - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmarx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to read */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hfmpi2c->XferISR = FMPI2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, - FMPI2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | - FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in slave/device FMPI2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) == (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT); - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* FMPI2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - /* Abort DMA Xfer if any */ - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmarx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmarx->XferAbortCallback(hfmpi2c->hdmarx); - } - } - } - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT; - - if (FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT | FMPI2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential transmit in slave/device FMPI2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) == (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT); - - /* FMPI2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hfmpi2c->hdmarx != NULL) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmarx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmarx->XferAbortCallback(hfmpi2c->hdmarx); - } - } - } - } - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) - { - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmatx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmatx->XferAbortCallback(hfmpi2c->hdmatx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA; - - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmatx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, - hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Reset XferSize */ - hfmpi2c->XferSize = 0; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device FMPI2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) == (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* FMPI2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hfmpi2c->hdmatx != NULL) - { - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmatx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmatx->XferAbortCallback(hfmpi2c->hdmatx); - } - } - } - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT; - - if (FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device FMPI2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Slave_Seq_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) == (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* FMPI2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hfmpi2c->hdmatx != NULL) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmatx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmatx->XferAbortCallback(hfmpi2c->hdmatx); - } - } - } - } - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN) - { - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - - /* Abort DMA Xfer if any */ - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmarx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmarx->XferAbortCallback(hfmpi2c->hdmarx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE; - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpi2c->pBuffPtr = pData; - hfmpi2c->XferCount = Size; - hfmpi2c->XferSize = hfmpi2c->XferCount; - hfmpi2c->XferOptions = XferOptions; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA; - - if (hfmpi2c->hdmarx != NULL) - { - /* Set the FMPI2C DMA transfer complete callback */ - hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hfmpi2c->hdmarx->XferHalfCpltCallback = NULL; - hfmpi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, - (uint32_t)pData, hfmpi2c->XferSize); - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Reset XferSize */ - hfmpi2c->XferSize = 0; - } - else - { - /* Update FMPI2C state */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Update FMPI2C error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - - if (FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c) -{ - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT; - - /* Enable the Address Match interrupt */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp; - - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN) - { - tmp = (uint32_t)(hfmpi2c->State) & FMPI2C_STATE_MSK; - hfmpi2c->PreviousState = tmp | (uint32_t)(hfmpi2c->Mode); - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - hfmpi2c->XferISR = NULL; - - /* Disable the Address Match interrupt */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master FMPI2C IT or DMA process communication with Interrupt. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress) -{ - if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - /* Disable Interrupts and Store Previous state */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX) - { - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_TX; - } - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX) - { - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Set State at HAL_FMPI2C_STATE_ABORT */ - hfmpi2c->State = HAL_FMPI2C_STATE_ABORT; - - /* Set NBYTES to 1 to generate a dummy read on FMPI2C peripheral */ - /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, 1, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_STOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Note : The FMPI2C interrupts must be enabled after unlocking current process - to avoid the risk of FMPI2C interrupt handle execution before current - process unlock */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT); - - return HAL_OK; - } - else - { - /* Wrong usage of abort function */ - /* This function should be used only in case of abort monitored by master device */ - return HAL_ERROR; - } -} - -/** - * @} - */ - -/** @defgroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ - -/** - * @brief This function handles FMPI2C event interrupt request. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Get current IT Flags and IT sources value */ - uint32_t itflags = READ_REG(hfmpi2c->Instance->ISR); - uint32_t itsources = READ_REG(hfmpi2c->Instance->CR1); - - /* FMPI2C events treatment -------------------------------------*/ - if (hfmpi2c->XferISR != NULL) - { - hfmpi2c->XferISR(hfmpi2c, itflags, itsources); - } -} - -/** - * @brief This function handles FMPI2C error interrupt request. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c) -{ - uint32_t itflags = READ_REG(hfmpi2c->Instance->ISR); - uint32_t itsources = READ_REG(hfmpi2c->Instance->CR1); - uint32_t tmperror; - - /* FMPI2C Bus error interrupt occurred ------------------------------------*/ - if ((FMPI2C_CHECK_FLAG(itflags, FMPI2C_FLAG_BERR) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(itsources, FMPI2C_IT_ERRI) != RESET)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_BERR); - } - - /* FMPI2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ - if ((FMPI2C_CHECK_FLAG(itflags, FMPI2C_FLAG_OVR) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(itsources, FMPI2C_IT_ERRI) != RESET)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_OVR); - } - - /* FMPI2C Arbitration Loss error interrupt occurred -------------------------------------*/ - if ((FMPI2C_CHECK_FLAG(itflags, FMPI2C_FLAG_ARLO) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(itsources, FMPI2C_IT_ERRI) != RESET)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO); - } - - /* Store current volatile hfmpi2c->ErrorCode, misra rule */ - tmperror = hfmpi2c->ErrorCode; - - /* Call the Error Callback in case of Error detected */ - if ((tmperror & (HAL_FMPI2C_ERROR_BERR | HAL_FMPI2C_ERROR_OVR | HAL_FMPI2C_ERROR_ARLO)) != HAL_FMPI2C_ERROR_NONE) - { - FMPI2C_ITError(hfmpi2c, tmperror); - } -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_MasterTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_MasterRxCpltCallback could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_SlaveTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_SlaveRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref FMPI2C_XFERDIRECTION - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_AddrCallback() could be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_ListenCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Memory Tx Transfer completed callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_MemTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Rx Transfer completed callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_MemRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief FMPI2C error callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief FMPI2C abort callback. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval None - */ -__weak void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPI2C_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @brief Peripheral State, Mode and Error functions - * -@verbatim - =============================================================================== - ##### Peripheral State, Mode and Error functions ##### - =============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the FMPI2C handle state. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval HAL state - */ -HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Return FMPI2C handle state */ - return hfmpi2c->State; -} - -/** - * @brief Returns the FMPI2C Master, Slave, Memory or no mode. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for FMPI2C module - * @retval HAL mode - */ -HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c) -{ - return hfmpi2c->Mode; -} - -/** - * @brief Return the FMPI2C error code. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @retval FMPI2C Error Code - */ -uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c) -{ - return hfmpi2c->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FMPI2C_Private_Functions - * @{ - */ - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_Master_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t tmpITFlags = ITFlags; - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_AF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Set corresponding Error Code */ - /* No need to generate STOP, it is automatically done */ - /* Error callback will be send during stop flag treatment */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_RXNE) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_RXI) != RESET)) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~FMPI2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_TXIS) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_TXI) != RESET)) - { - /* Write data to TXDR */ - hfmpi2c->Instance->TXDR = *hfmpi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_TCR) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_TCI) != RESET)) - { - if ((hfmpi2c->XferCount != 0U) && (hfmpi2c->XferSize == 0U)) - { - devaddress = (uint16_t)(hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD); - - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - FMPI2C_TransferConfig(hfmpi2c, devaddress, (uint8_t)hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP); - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - if (hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME) - { - FMPI2C_TransferConfig(hfmpi2c, devaddress, (uint8_t)hfmpi2c->XferSize, - hfmpi2c->XferOptions, FMPI2C_NO_STARTSTOP); - } - else - { - FMPI2C_TransferConfig(hfmpi2c, devaddress, (uint8_t)hfmpi2c->XferSize, - FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP); - } - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE) - { - /* Call FMPI2C Master Sequential complete process */ - FMPI2C_ITMasterSeqCplt(hfmpi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE); - } - } - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_TC) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_TCI) != RESET)) - { - if (hfmpi2c->XferCount == 0U) - { - if (FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hfmpi2c->XferOptions == FMPI2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP; - } - else - { - /* Call FMPI2C Master Sequential complete process */ - FMPI2C_ITMasterSeqCplt(hfmpi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE); - } - } - else - { - /* Nothing to do */ - } - - if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_STOPF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_STOPI) != RESET)) - { - /* Call FMPI2C Master complete process */ - FMPI2C_ITMasterCplt(hfmpi2c, tmpITFlags); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_Slave_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint32_t tmpoptions = hfmpi2c->XferOptions; - uint32_t tmpITFlags = ITFlags; - - /* Process locked */ - __HAL_LOCK(hfmpi2c); - - /* Check if STOPF is set */ - if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_STOPF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_STOPI) != RESET)) - { - /* Call FMPI2C Slave complete process */ - FMPI2C_ITSlaveCplt(hfmpi2c, tmpITFlags); - } - - if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_AF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_NACKI) != RESET)) - { - /* Check that FMPI2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0*/ - /* So clear Flag NACKF only */ - if (hfmpi2c->XferCount == 0U) - { - if ((hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN) && (tmpoptions == FMPI2C_FIRST_AND_LAST_FRAME)) - /* Same action must be done for (tmpoptions == FMPI2C_LAST_FRAME) which removed for - Warning[Pa134]: left and right operands are identical */ - { - /* Call FMPI2C Listen complete process */ - FMPI2C_ITListenCplt(hfmpi2c, tmpITFlags); - } - else if ((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != FMPI2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - - /* Last Byte is Transmitted */ - /* Call FMPI2C Slave Sequential complete process */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - - if ((tmpoptions == FMPI2C_FIRST_FRAME) || (tmpoptions == FMPI2C_NEXT_FRAME)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode); - } - } - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_RXNE) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_RXI) != RESET)) - { - if (hfmpi2c->XferCount > 0U) - { - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - } - - if ((hfmpi2c->XferCount == 0U) && \ - (tmpoptions != FMPI2C_NO_OPTION_FRAME)) - { - /* Call FMPI2C Slave Sequential complete process */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - } - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_ADDR) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_ADDRI) != RESET)) - { - FMPI2C_ITAddrCplt(hfmpi2c, tmpITFlags); - } - else if ((FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_TXIS) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_TXI) != RESET)) - { - /* Write data to TXDR only if XferCount not reach "0" */ - /* A TXIS flag can be set, during STOP treatment */ - /* Check if all Data have already been sent */ - /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ - if (hfmpi2c->XferCount > 0U) - { - /* Write data to TXDR */ - hfmpi2c->Instance->TXDR = *hfmpi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - hfmpi2c->XferCount--; - hfmpi2c->XferSize--; - } - else - { - if ((tmpoptions == FMPI2C_NEXT_FRAME) || (tmpoptions == FMPI2C_FIRST_FRAME)) - { - /* Last Byte is Transmitted */ - /* Call FMPI2C Slave Sequential complete process */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - } - } - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_Master_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t xfermode; - - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_AF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Set corresponding Error Code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - - /* No need to generate STOP, it is automatically done */ - /* But enable STOP interrupt, to treat it */ - /* Error callback will be send during stop flag treatment */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT); - - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - } - else if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_TCR) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_TCI) != RESET)) - { - /* Disable TC interrupt */ - __HAL_FMPI2C_DISABLE_IT(hfmpi2c, FMPI2C_IT_TCI); - - if (hfmpi2c->XferCount != 0U) - { - /* Recover Slave address */ - devaddress = (uint16_t)(hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD); - - /* Prepare the new XferSize to transfer */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = FMPI2C_RELOAD_MODE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - if (hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME) - { - xfermode = hfmpi2c->XferOptions; - } - else - { - xfermode = FMPI2C_AUTOEND_MODE; - } - } - - /* Set the new XferSize in Nbytes register */ - FMPI2C_TransferConfig(hfmpi2c, devaddress, (uint8_t)hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP); - - /* Update XferCount value */ - hfmpi2c->XferCount -= hfmpi2c->XferSize; - - /* Enable DMA Request */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX) - { - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN; - } - else - { - hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN; - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE) - { - /* Call FMPI2C Master Sequential complete process */ - FMPI2C_ITMasterSeqCplt(hfmpi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE); - } - } - } - else if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_TC) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_TCI) != RESET)) - { - if (hfmpi2c->XferCount == 0U) - { - if (FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hfmpi2c->XferOptions == FMPI2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP; - } - else - { - /* Call FMPI2C Master Sequential complete process */ - FMPI2C_ITMasterSeqCplt(hfmpi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE); - } - } - else if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_STOPF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_STOPI) != RESET)) - { - /* Call FMPI2C Master complete process */ - FMPI2C_ITMasterCplt(hfmpi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_Slave_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint32_t tmpoptions = hfmpi2c->XferOptions; - uint32_t treatdmanack = 0U; - HAL_FMPI2C_StateTypeDef tmpstate; - - /* Process locked */ - __HAL_LOCK(hfmpi2c); - - /* Check if STOPF is set */ - if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_STOPF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_STOPI) != RESET)) - { - /* Call FMPI2C Slave complete process */ - FMPI2C_ITSlaveCplt(hfmpi2c, ITFlags); - } - - if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_AF) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_NACKI) != RESET)) - { - /* Check that FMPI2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0 */ - /* So clear Flag NACKF only */ - if ((FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_CR1_TXDMAEN) != RESET) || - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_CR1_RXDMAEN) != RESET)) - { - /* Split check of hdmarx, for MISRA compliance */ - if (hfmpi2c->hdmarx != NULL) - { - if (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_CR1_RXDMAEN) != RESET) - { - if (__HAL_DMA_GET_COUNTER(hfmpi2c->hdmarx) == 0U) - { - treatdmanack = 1U; - } - } - } - - /* Split check of hdmatx, for MISRA compliance */ - if (hfmpi2c->hdmatx != NULL) - { - if (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_CR1_TXDMAEN) != RESET) - { - if (__HAL_DMA_GET_COUNTER(hfmpi2c->hdmatx) == 0U) - { - treatdmanack = 1U; - } - } - } - - if (treatdmanack == 1U) - { - if ((hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN) && (tmpoptions == FMPI2C_FIRST_AND_LAST_FRAME)) - /* Same action must be done for (tmpoptions == FMPI2C_LAST_FRAME) which removed for - Warning[Pa134]: left and right operands are identical */ - { - /* Call FMPI2C Listen complete process */ - FMPI2C_ITListenCplt(hfmpi2c, ITFlags); - } - else if ((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != FMPI2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - - /* Last Byte is Transmitted */ - /* Call FMPI2C Slave Sequential complete process */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - - /* Store current hfmpi2c->State, solve MISRA2012-Rule-13.5 */ - tmpstate = hfmpi2c->State; - - if ((tmpoptions == FMPI2C_FIRST_FRAME) || (tmpoptions == FMPI2C_NEXT_FRAME)) - { - if ((tmpstate == HAL_FMPI2C_STATE_BUSY_TX) || (tmpstate == HAL_FMPI2C_STATE_BUSY_TX_LISTEN)) - { - hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_TX; - } - else if ((tmpstate == HAL_FMPI2C_STATE_BUSY_RX) || (tmpstate == HAL_FMPI2C_STATE_BUSY_RX_LISTEN)) - { - hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode); - } - } - } - else - { - /* Only Clear NACK Flag, no DMA treatment is pending */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - } - } - else if ((FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_ADDR) != RESET) && \ - (FMPI2C_CHECK_IT_SOURCE(ITSources, FMPI2C_IT_ADDRI) != RESET)) - { - FMPI2C_ITAddrCplt(hfmpi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for write request. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart) -{ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)MemAddSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == FMPI2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TCR flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for read request. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart) -{ - FMPI2C_TransferConfig(hfmpi2c, DevAddress, (uint8_t)MemAddSize, FMPI2C_SOFTEND_MODE, FMPI2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == FMPI2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TC flag is set */ - if (FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief FMPI2C Address complete process callback. - * @param hfmpi2c FMPI2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void FMPI2C_ITAddrCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags) -{ - uint8_t transferdirection; - uint16_t slaveaddrcode; - uint16_t ownadd1code; - uint16_t ownadd2code; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(ITFlags); - - /* In case of Listen state, need to inform upper layer of address match code event */ - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) == (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - transferdirection = FMPI2C_GET_DIR(hfmpi2c); - slaveaddrcode = FMPI2C_GET_ADDR_MATCH(hfmpi2c); - ownadd1code = FMPI2C_GET_OWN_ADDRESS1(hfmpi2c); - ownadd2code = FMPI2C_GET_OWN_ADDRESS2(hfmpi2c); - - /* If 10bits addressing mode is selected */ - if (hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT) - { - if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) - { - slaveaddrcode = ownadd1code; - hfmpi2c->AddrEventCount++; - if (hfmpi2c->AddrEventCount == 2U) - { - /* Reset Address Event counter */ - hfmpi2c->AddrEventCount = 0U; - - /* Clear ADDR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->AddrCallback(hfmpi2c, transferdirection, slaveaddrcode); -#else - HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - } - else - { - slaveaddrcode = ownadd2code; - - /* Disable ADDR Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->AddrCallback(hfmpi2c, transferdirection, slaveaddrcode); -#else - HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - } - /* else 7 bits addressing mode is selected */ - else - { - /* Disable ADDR Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->AddrCallback(hfmpi2c, transferdirection, slaveaddrcode); -#else - HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - } - /* Else clear address flag only */ - else - { - /* Clear ADDR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - } -} - -/** - * @brief FMPI2C Master sequential complete process. - * @param hfmpi2c FMPI2C handle. - * @retval None - */ -static void FMPI2C_ITMasterSeqCplt(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* Reset FMPI2C handle mode */ - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* No Generate Stop, to permit restart mode */ - /* The stop will be done at the end of transfer, when FMPI2C_AUTOEND_MODE enable */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX) - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_TX; - hfmpi2c->XferISR = NULL; - - /* Disable Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->MasterTxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX */ - else - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_RX; - hfmpi2c->XferISR = NULL; - - /* Disable Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->MasterRxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief FMPI2C Slave sequential complete process. - * @param hfmpi2c FMPI2C handle. - * @retval None - */ -static void FMPI2C_ITSlaveSeqCplt(FMPI2C_HandleTypeDef *hfmpi2c) -{ - uint32_t tmpcr1value = READ_REG(hfmpi2c->Instance->CR1); - - /* Reset FMPI2C handle mode */ - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* If a DMA is ongoing, Update handle size context */ - if (FMPI2C_CHECK_IT_SOURCE(tmpcr1value, FMPI2C_CR1_TXDMAEN) != RESET) - { - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - } - else if (FMPI2C_CHECK_IT_SOURCE(tmpcr1value, FMPI2C_CR1_RXDMAEN) != RESET) - { - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - } - else - { - /* Do nothing */ - } - - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) - { - /* Remove HAL_FMPI2C_STATE_SLAVE_BUSY_TX, keep only HAL_FMPI2C_STATE_LISTEN */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_TX; - - /* Disable Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->SlaveTxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN) - { - /* Remove HAL_FMPI2C_STATE_SLAVE_BUSY_RX, keep only HAL_FMPI2C_STATE_LISTEN */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_RX; - - /* Disable Interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->SlaveRxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief FMPI2C Master complete process. - * @param hfmpi2c FMPI2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void FMPI2C_ITMasterCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags) -{ - uint32_t tmperror; - uint32_t tmpITFlags = ITFlags; - __IO uint32_t tmpreg; - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Disable Interrupts and Store Previous state */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX) - { - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT); - hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_TX; - } - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX) - { - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT); - hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - /* Reset handle parameters */ - hfmpi2c->XferISR = NULL; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - - if (FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_AF) != RESET) - { - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Set acknowledge error code */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - } - - /* Fetch Last receive data if any */ - if ((hfmpi2c->State == HAL_FMPI2C_STATE_ABORT) && (FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_RXNE) != RESET)) - { - /* Read data from RXDR */ - tmpreg = (uint8_t)hfmpi2c->Instance->RXDR; - UNUSED(tmpreg); - } - - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - - /* Store current volatile hfmpi2c->ErrorCode, misra rule */ - tmperror = hfmpi2c->ErrorCode; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if ((hfmpi2c->State == HAL_FMPI2C_STATE_ABORT) || (tmperror != HAL_FMPI2C_ERROR_NONE)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode); - } - /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX */ - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX) - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MEM) - { - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->MemTxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_MemTxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - else - { - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->MasterTxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - } - /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX */ - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX) - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MEM) - { - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->MemRxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_MemRxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - else - { - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->MasterRxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief FMPI2C Slave complete process. - * @param hfmpi2c FMPI2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void FMPI2C_ITSlaveCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags) -{ - uint32_t tmpcr1value = READ_REG(hfmpi2c->Instance->CR1); - uint32_t tmpITFlags = ITFlags; - HAL_FMPI2C_StateTypeDef tmpstate = hfmpi2c->State; - - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Disable Interrupts and Store Previous state */ - if ((tmpstate == HAL_FMPI2C_STATE_BUSY_TX) || (tmpstate == HAL_FMPI2C_STATE_BUSY_TX_LISTEN)) - { - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT); - hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_TX; - } - else if ((tmpstate == HAL_FMPI2C_STATE_BUSY_RX) || (tmpstate == HAL_FMPI2C_STATE_BUSY_RX_LISTEN)) - { - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT); - hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Disable Address Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - - /* If a DMA is ongoing, Update handle size context */ - if (FMPI2C_CHECK_IT_SOURCE(tmpcr1value, FMPI2C_CR1_TXDMAEN) != RESET) - { - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - - if (hfmpi2c->hdmatx != NULL) - { - hfmpi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hfmpi2c->hdmatx); - } - } - else if (FMPI2C_CHECK_IT_SOURCE(tmpcr1value, FMPI2C_CR1_RXDMAEN) != RESET) - { - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - - if (hfmpi2c->hdmarx != NULL) - { - hfmpi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hfmpi2c->hdmarx); - } - } - else - { - /* Do nothing */ - } - - /* Store Last receive data if any */ - if (FMPI2C_CHECK_FLAG(tmpITFlags, FMPI2C_FLAG_RXNE) != RESET) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~FMPI2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - if ((hfmpi2c->XferSize > 0U)) - { - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - } - } - - /* All data are not transferred, so set error code accordingly */ - if (hfmpi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - } - - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - hfmpi2c->XferISR = NULL; - - if (hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ - if (hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN) - { - /* Call FMPI2C Listen complete process */ - FMPI2C_ITListenCplt(hfmpi2c, tmpITFlags); - } - } - else if (hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME) - { - /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->ListenCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_ListenCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - /* Call the corresponding callback to inform upper layer of End of Transfer */ - else if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX) - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->SlaveRxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - else - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->SlaveTxCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief FMPI2C Listen complete process. - * @param hfmpi2c FMPI2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void FMPI2C_ITListenCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags) -{ - /* Reset handle parameters */ - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - hfmpi2c->XferISR = NULL; - - /* Store Last receive data if any */ - if (FMPI2C_CHECK_FLAG(ITFlags, FMPI2C_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hfmpi2c->pBuffPtr = (uint8_t)hfmpi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hfmpi2c->pBuffPtr++; - - if ((hfmpi2c->XferSize > 0U)) - { - hfmpi2c->XferSize--; - hfmpi2c->XferCount--; - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF; - } - } - - /* Disable all Interrupts*/ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT); - - /* Clear NACK Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->ListenCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_ListenCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ -} - -/** - * @brief FMPI2C interrupts error process. - * @param hfmpi2c FMPI2C handle. - * @param ErrorCode Error code to handle. - * @retval None - */ -static void FMPI2C_ITError(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ErrorCode) -{ - HAL_FMPI2C_StateTypeDef tmpstate = hfmpi2c->State; - uint32_t tmppreviousstate; - - /* Reset handle parameters */ - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME; - hfmpi2c->XferCount = 0U; - - /* Set new error code */ - hfmpi2c->ErrorCode |= ErrorCode; - - /* Disable Interrupts */ - if ((tmpstate == HAL_FMPI2C_STATE_LISTEN) || - (tmpstate == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) || - (tmpstate == HAL_FMPI2C_STATE_BUSY_RX_LISTEN)) - { - /* Disable all interrupts, except interrupts related to LISTEN state */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT); - - /* keep HAL_FMPI2C_STATE_LISTEN if set */ - hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN; - hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT; - } - else - { - /* Disable all interrupts */ - FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT); - - /* If state is an abort treatment on going, don't change state */ - /* This change will be do later */ - if (hfmpi2c->State != HAL_FMPI2C_STATE_ABORT) - { - /* Set HAL_FMPI2C_STATE_READY */ - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - } - hfmpi2c->XferISR = NULL; - } - - /* Abort DMA TX transfer if any */ - tmppreviousstate = hfmpi2c->PreviousState; - if ((hfmpi2c->hdmatx != NULL) && ((tmppreviousstate == FMPI2C_STATE_MASTER_BUSY_TX) || \ - (tmppreviousstate == FMPI2C_STATE_SLAVE_BUSY_TX))) - { - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - } - - if (HAL_DMA_GetState(hfmpi2c->hdmatx) != HAL_DMA_STATE_READY) - { - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmatx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hfmpi2c->hdmatx->XferAbortCallback(hfmpi2c->hdmatx); - } - } - else - { - FMPI2C_TreatErrorCallback(hfmpi2c); - } - } - /* Abort DMA RX transfer if any */ - else if ((hfmpi2c->hdmarx != NULL) && ((tmppreviousstate == FMPI2C_STATE_MASTER_BUSY_RX) || \ - (tmppreviousstate == FMPI2C_STATE_SLAVE_BUSY_RX))) - { - if ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN) - { - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - } - - if (HAL_DMA_GetState(hfmpi2c->hdmarx) != HAL_DMA_STATE_READY) - { - /* Set the FMPI2C DMA Abort callback : - will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */ - hfmpi2c->hdmarx->XferAbortCallback = FMPI2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hfmpi2c->hdmarx) != HAL_OK) - { - /* Call Directly hfmpi2c->hdmarx->XferAbortCallback function in case of error */ - hfmpi2c->hdmarx->XferAbortCallback(hfmpi2c->hdmarx); - } - } - else - { - FMPI2C_TreatErrorCallback(hfmpi2c); - } - } - else - { - FMPI2C_TreatErrorCallback(hfmpi2c); - } -} - -/** - * @brief FMPI2C Error callback treatment. - * @param hfmpi2c FMPI2C handle. - * @retval None - */ -static void FMPI2C_TreatErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c) -{ - if (hfmpi2c->State == HAL_FMPI2C_STATE_ABORT) - { - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->AbortCpltCallback(hfmpi2c); -#else - HAL_FMPI2C_AbortCpltCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } - else - { - hfmpi2c->PreviousState = FMPI2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPI2C_REGISTER_CALLBACKS == 1) - hfmpi2c->ErrorCallback(hfmpi2c); -#else - HAL_FMPI2C_ErrorCallback(hfmpi2c); -#endif /* USE_HAL_FMPI2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief FMPI2C Tx data register flush process. - * @param hfmpi2c FMPI2C handle. - * @retval None - */ -static void FMPI2C_Flush_TXDR(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* If a pending TXIS flag is set */ - /* Write a dummy data in TXDR to clear it */ - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) != RESET) - { - hfmpi2c->Instance->TXDR = 0x00U; - } - - /* Flush TX register if not empty */ - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXE) == RESET) - { - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_TXE); - } -} - -/** - * @brief DMA FMPI2C master transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - FMPI2C_HandleTypeDef *hfmpi2c = (FMPI2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hfmpi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hfmpi2c->pBuffPtr += hfmpi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - } - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, - hfmpi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA FMPI2C slave transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - FMPI2C_HandleTypeDef *hfmpi2c = (FMPI2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - uint32_t tmpoptions = hfmpi2c->XferOptions; - - if ((tmpoptions == FMPI2C_NEXT_FRAME) || (tmpoptions == FMPI2C_FIRST_FRAME)) - { - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN; - - /* Last Byte is Transmitted */ - /* Call FMPI2C Slave Sequential complete process */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA FMPI2C master receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - FMPI2C_HandleTypeDef *hfmpi2c = (FMPI2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hfmpi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hfmpi2c->pBuffPtr += hfmpi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hfmpi2c->XferCount > MAX_NBYTE_SIZE) - { - hfmpi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpi2c->XferSize = hfmpi2c->XferCount; - } - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, - hfmpi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA FMPI2C slave receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - FMPI2C_HandleTypeDef *hfmpi2c = (FMPI2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - uint32_t tmpoptions = hfmpi2c->XferOptions; - - if ((__HAL_DMA_GET_COUNTER(hfmpi2c->hdmarx) == 0U) && \ - (tmpoptions != FMPI2C_NO_OPTION_FRAME)) - { - /* Disable DMA Request */ - hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN; - - /* Call FMPI2C Slave Sequential complete process */ - FMPI2C_ITSlaveSeqCplt(hfmpi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA FMPI2C communication error callback. - * @param hdma DMA handle - * @retval None - */ -static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma) -{ - uint32_t treatdmaerror = 0U; - /* Derogation MISRAC2012-Rule-11.5 */ - FMPI2C_HandleTypeDef *hfmpi2c = (FMPI2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - if (hfmpi2c->hdmatx != NULL) - { - if (__HAL_DMA_GET_COUNTER(hfmpi2c->hdmatx) == 0U) - { - treatdmaerror = 1U; - } - } - - if (hfmpi2c->hdmarx != NULL) - { - if (__HAL_DMA_GET_COUNTER(hfmpi2c->hdmarx) == 0U) - { - treatdmaerror = 1U; - } - } - - /* Check if a FIFO error is detected, if true normal use case, so no specific action to perform */ - if (!((HAL_DMA_GetError(hdma) == HAL_DMA_ERROR_FE)) && (treatdmaerror != 0U)) - { - /* Disable Acknowledge */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_DMA); - } -} - -/** - * @brief DMA FMPI2C communication abort callback - * (To be called at end of DMA Abort procedure). - * @param hdma DMA handle. - * @retval None - */ -static void FMPI2C_DMAAbort(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - FMPI2C_HandleTypeDef *hfmpi2c = (FMPI2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Reset AbortCpltCallback */ - if (hfmpi2c->hdmatx != NULL) - { - hfmpi2c->hdmatx->XferAbortCallback = NULL; - } - if (hfmpi2c->hdmarx != NULL) - { - hfmpi2c->hdmarx->XferAbortCallback = NULL; - } - - FMPI2C_TreatErrorCallback(hfmpi2c); -} - -/** - * @brief This function handles FMPI2C Communication Timeout. It waits - * until a flag is no longer in the specified status. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param Flag Specifies the FMPI2C flag to check. - * @param Status The actual Flag status (SET or RESET). - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, - uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles FMPI2C Communication Timeout for specific usage of TXIS flag. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart) -{ - while (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == RESET) - { - /* Check if an error is detected */ - if (FMPI2C_IsErrorOccurred(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles FMPI2C Communication Timeout for specific usage of STOP flag. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart) -{ - while (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET) - { - /* Check if an error is detected */ - if (FMPI2C_IsErrorOccurred(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles FMPI2C Communication Timeout for specific usage of RXNE flag. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, - uint32_t Tickstart) -{ - while (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == RESET) - { - /* Check if an error is detected */ - if (FMPI2C_IsErrorOccurred(hfmpi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check if a STOPF is detected */ - if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) - { - /* Check if an RXNE is pending */ - /* Store Last receive data if any */ - if ((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET) && (hfmpi2c->XferSize > 0U)) - { - /* Return HAL_OK */ - /* The Reading of data from RXDR will be done in caller function */ - return HAL_OK; - } - else - { - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles errors detection during an FMPI2C Communication. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef FMPI2C_IsErrorOccurred(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t itflag = hfmpi2c->Instance->ISR; - uint32_t error_code = 0; - - if (HAL_IS_BIT_SET(itflag, FMPI2C_FLAG_AF)) - { - /* In case of Soft End condition, generate the STOP condition */ - if (FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE) - { - /* Generate Stop */ - hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP; - } - - /* Wait until STOP Flag is set or timeout occurred */ - /* AutoEnd should be initiate after AF */ - while ((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - error_code |= HAL_FMPI2C_ERROR_TIMEOUT; - - status = HAL_ERROR; - } - } - } - - /* In case STOP Flag is detected, clear it */ - if (status == HAL_OK) - { - /* Clear STOP Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF); - } - - /* Clear NACKF Flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF); - - error_code |= HAL_FMPI2C_ERROR_AF; - - status = HAL_ERROR; - } - - /* Refresh Content of Status register */ - itflag = hfmpi2c->Instance->ISR; - - /* Then verify if an additional errors occurs */ - /* Check if a Bus error occurred */ - if (HAL_IS_BIT_SET(itflag, FMPI2C_FLAG_BERR)) - { - error_code |= HAL_FMPI2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_BERR); - - status = HAL_ERROR; - } - - /* Check if an Over-Run/Under-Run error occurred */ - if (HAL_IS_BIT_SET(itflag, FMPI2C_FLAG_OVR)) - { - error_code |= HAL_FMPI2C_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_OVR); - - status = HAL_ERROR; - } - - /* Check if an Arbitration Loss error occurred */ - if (HAL_IS_BIT_SET(itflag, FMPI2C_FLAG_ARLO)) - { - error_code |= HAL_FMPI2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO); - - status = HAL_ERROR; - } - - if (status != HAL_OK) - { - /* Flush TX register */ - FMPI2C_Flush_TXDR(hfmpi2c); - - /* Clear Configuration Register 2 */ - FMPI2C_RESET_CR2(hfmpi2c); - - hfmpi2c->ErrorCode |= error_code; - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - } - - return status; -} - -/** - * @brief Handles FMPI2Cx communication when starting transfer or during transfer (TC or TCR flag are set). - * @param hfmpi2c FMPI2C handle. - * @param DevAddress Specifies the slave address to be programmed. - * @param Size Specifies the number of bytes to be programmed. - * This parameter must be a value between 0 and 255. - * @param Mode New state of the FMPI2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref FMPI2C_RELOAD_MODE Enable Reload mode . - * @arg @ref FMPI2C_AUTOEND_MODE Enable Automatic end mode. - * @arg @ref FMPI2C_SOFTEND_MODE Enable Software end mode. - * @param Request New state of the FMPI2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref FMPI2C_NO_STARTSTOP Don't Generate stop and start condition. - * @arg @ref FMPI2C_GENERATE_STOP Generate stop condition (Size should be set to 0). - * @arg @ref FMPI2C_GENERATE_START_READ Generate Restart for read request. - * @arg @ref FMPI2C_GENERATE_START_WRITE Generate Restart for write request. - * @retval None - */ -static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, - uint32_t Request) -{ - /* Check the parameters */ - assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance)); - assert_param(IS_TRANSFER_MODE(Mode)); - assert_param(IS_TRANSFER_REQUEST(Request)); - - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & FMPI2C_CR2_SADD) | \ - (((uint32_t)Size << FMPI2C_CR2_NBYTES_Pos) & FMPI2C_CR2_NBYTES) | \ - (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); - - /* update CR2 register */ - MODIFY_REG(hfmpi2c->Instance->CR2, \ - ((FMPI2C_CR2_SADD | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_AUTOEND | \ - (FMPI2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - FMPI2C_CR2_RD_WRN_Pos))) | \ - FMPI2C_CR2_START | FMPI2C_CR2_STOP)), tmp); -} - -/** - * @brief Manage the enabling of Interrupts. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param InterruptRequest Value of @ref FMPI2C_Interrupt_configuration_definition. - * @retval None - */ -static void FMPI2C_Enable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((hfmpi2c->XferISR == FMPI2C_Master_ISR_DMA) || \ - (hfmpi2c->XferISR == FMPI2C_Slave_ISR_DMA)) - { - if ((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK and ADDR interrupts */ - tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI; - } - - if (InterruptRequest == FMPI2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_NACKI; - } - - if (InterruptRequest == FMPI2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= (FMPI2C_IT_STOPI | FMPI2C_IT_TCI); - } - - if (InterruptRequest == FMPI2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= FMPI2C_IT_TCI; - } - } - else - { - if ((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK, and ADDR interrupts */ - tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI; - } - - if ((InterruptRequest & FMPI2C_XFER_TX_IT) == FMPI2C_XFER_TX_IT) - { - /* Enable ERR, TC, STOP, NACK and RXI interrupts */ - tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI; - } - - if ((InterruptRequest & FMPI2C_XFER_RX_IT) == FMPI2C_XFER_RX_IT) - { - /* Enable ERR, TC, STOP, NACK and TXI interrupts */ - tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_RXI; - } - - if (InterruptRequest == FMPI2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= FMPI2C_IT_STOPI; - } - } - - /* Enable interrupts only at the end */ - /* to avoid the risk of FMPI2C interrupt handle execution before */ - /* all interrupts requested done */ - __HAL_FMPI2C_ENABLE_IT(hfmpi2c, tmpisr); -} - -/** - * @brief Manage the disabling of Interrupts. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2C. - * @param InterruptRequest Value of @ref FMPI2C_Interrupt_configuration_definition. - * @retval None - */ -static void FMPI2C_Disable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((InterruptRequest & FMPI2C_XFER_TX_IT) == FMPI2C_XFER_TX_IT) - { - /* Disable TC and TXI interrupts */ - tmpisr |= FMPI2C_IT_TCI | FMPI2C_IT_TXI; - - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) != (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI; - } - } - - if ((InterruptRequest & FMPI2C_XFER_RX_IT) == FMPI2C_XFER_RX_IT) - { - /* Disable TC and RXI interrupts */ - tmpisr |= FMPI2C_IT_TCI | FMPI2C_IT_RXI; - - if (((uint32_t)hfmpi2c->State & (uint32_t)HAL_FMPI2C_STATE_LISTEN) != (uint32_t)HAL_FMPI2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI; - } - } - - if ((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT) - { - /* Disable ADDR, NACK and STOP interrupts */ - tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI; - } - - if (InterruptRequest == FMPI2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_NACKI; - } - - if (InterruptRequest == FMPI2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= FMPI2C_IT_STOPI; - } - - if (InterruptRequest == FMPI2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= FMPI2C_IT_TCI; - } - - /* Disable interrupts only at the end */ - /* to avoid a breaking situation like at "t" time */ - /* all disable interrupts request are not done */ - __HAL_FMPI2C_DISABLE_IT(hfmpi2c, tmpisr); -} - -/** - * @brief Convert FMPI2Cx OTHER_xxx XferOptions to functional XferOptions. - * @param hfmpi2c FMPI2C handle. - * @retval None - */ -static void FMPI2C_ConvertOtherXferOptions(FMPI2C_HandleTypeDef *hfmpi2c) -{ - /* if user set XferOptions to FMPI2C_OTHER_FRAME */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to FMPI2C_FIRST_FRAME */ - if (hfmpi2c->XferOptions == FMPI2C_OTHER_FRAME) - { - hfmpi2c->XferOptions = FMPI2C_FIRST_FRAME; - } - /* else if user set XferOptions to FMPI2C_OTHER_AND_LAST_FRAME */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to FMPI2C_FIRST_AND_LAST_FRAME */ - else if (hfmpi2c->XferOptions == FMPI2C_OTHER_AND_LAST_FRAME) - { - hfmpi2c->XferOptions = FMPI2C_FIRST_AND_LAST_FRAME; - } - else - { - /* Nothing to do */ - } -} - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#endif /* HAL_FMPI2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c deleted file mode 100644 index 267a9ef..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c +++ /dev/null @@ -1,258 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpi2c_ex.c - * @author MCD Application Team - * @brief FMPI2C Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of FMPI2C Extended peripheral: - * + Filter Mode Functions - * + FastModePlus Functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### FMPI2C peripheral Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FMPI2C interface for STM32F4xx - devices contains the following additional features - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - (+) Disable or enable Fast Mode Plus - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to: - (#) Configure FMPI2C Analog noise filter using the function HAL_FMPI2CEx_ConfigAnalogFilter() - (#) Configure FMPI2C Digital noise filter using the function HAL_FMPI2CEx_ConfigDigitalFilter() - (#) Configure the enable or disable of fast mode plus driving capability using the functions : - (++) HAL_FMPI2CEx_EnableFastModePlus() - (++) HAL_FMPI2CEx_DisableFastModePlus() - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FMPI2CEx FMPI2CEx - * @brief FMPI2C Extended HAL module driver - * @{ - */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED -#if defined(FMPI2C_CR1_PE) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions - * @{ - */ - -/** @defgroup FMPI2CEx_Exported_Functions_Group1 Filter Mode Functions - * @brief Filter Mode Functions - * -@verbatim - =============================================================================== - ##### Filter Mode Functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - -@endverbatim - * @{ - */ - -/** - * @brief Configure FMPI2C Analog noise filter. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2Cx peripheral. - * @param AnalogFilter New state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2CEx_ConfigAnalogFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance)); - assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY; - - /* Disable the selected FMPI2C peripheral */ - __HAL_FMPI2C_DISABLE(hfmpi2c); - - /* Reset FMPI2Cx ANOFF bit */ - hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF); - - /* Set analog filter bit*/ - hfmpi2c->Instance->CR1 |= AnalogFilter; - - __HAL_FMPI2C_ENABLE(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configure FMPI2C Digital noise filter. - * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains - * the configuration information for the specified FMPI2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPI2CEx_ConfigDigitalFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance)); - assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter)); - - if (hfmpi2c->State == HAL_FMPI2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_BUSY; - - /* Disable the selected FMPI2C peripheral */ - __HAL_FMPI2C_DISABLE(hfmpi2c); - - /* Get the old register value */ - tmpreg = hfmpi2c->Instance->CR1; - - /* Reset FMPI2Cx DNF bits [11:8] */ - tmpreg &= ~(FMPI2C_CR1_DNF); - - /* Set FMPI2Cx DNF coefficient */ - tmpreg |= DigitalFilter << 8U; - - /* Store the new register value */ - hfmpi2c->Instance->CR1 = tmpreg; - - __HAL_FMPI2C_ENABLE(hfmpi2c); - - hfmpi2c->State = HAL_FMPI2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @} - */ - -/** @defgroup FMPI2CEx_Exported_Functions_Group3 Fast Mode Plus Functions - * @brief Fast Mode Plus Functions - * -@verbatim - =============================================================================== - ##### Fast Mode Plus Functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Fast Mode Plus - -@endverbatim - * @{ - */ - -/** - * @brief Enable the FMPI2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref FMPI2CEx_FastModePlus values - * @note For FMPI2C1, fast mode plus driving capability can be enabled on all selected - * FMPI2C1 pins using FMPI2C_FASTMODEPLUS_FMPI2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining FMPI2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be enabled only by using FMPI2C_FASTMODEPLUS_FMPI2C1 parameter. - * @retval None - */ -void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Enable fast mode plus driving capability for selected pin */ - SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus); -} - -/** - * @brief Disable the FMPI2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref FMPI2CEx_FastModePlus values - * @note For FMPI2C1, fast mode plus driving capability can be disabled on all selected - * FMPI2C1 pins using FMPI2C_FASTMODEPLUS_FMPI2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining FMPI2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be disabled only by using FMPI2C_FASTMODEPLUS_FMPI2C1 parameter. - * @retval None - */ -void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Disable fast mode plus driving capability for selected pin */ - CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus); -} -/** - * @} - */ -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#endif /* HAL_FMPI2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus.c deleted file mode 100644 index 700f25a..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus.c +++ /dev/null @@ -1,2749 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpsmbus.c - * @author MCD Application Team - * @brief FMPSMBUS HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the System Management Bus (SMBus) peripheral, - * based on I2C principles of operation : - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The FMPSMBUS HAL driver can be used as follows: - - (#) Declare a FMPSMBUS_HandleTypeDef handle structure, for example: - FMPSMBUS_HandleTypeDef hfmpsmbus; - - (#)Initialize the FMPSMBUS low level resources by implementing the HAL_FMPSMBUS_MspInit() API: - (##) Enable the FMPSMBUSx interface clock - (##) FMPSMBUS pins configuration - (+++) Enable the clock for the FMPSMBUS GPIOs - (+++) Configure FMPSMBUS pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the FMPSMBUSx interrupt priority - (+++) Enable the NVIC FMPSMBUS IRQ Channel - - (#) Configure the Communication Clock Timing, Bus Timeout, Own Address1, Master Addressing mode, - Dual Addressing mode, Own Address2, Own Address2 Mask, General call, Nostretch mode, - Peripheral mode and Packet Error Check mode in the hfmpsmbus Init structure. - - (#) Initialize the FMPSMBUS registers by calling the HAL_FMPSMBUS_Init() API: - (++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_FMPSMBUS_MspInit(&hfmpsmbus) API. - - (#) To check if target device is ready for communication, use the function HAL_FMPSMBUS_IsDeviceReady() - - (#) For FMPSMBUS IO operations, only one mode of operations is available within this driver - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master/host FMPSMBUS mode an amount of data in non-blocking mode - using HAL_FMPSMBUS_Master_Transmit_IT() - (++) At transmission end of transfer HAL_FMPSMBUS_MasterTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_MasterTxCpltCallback() - (+) Receive in master/host FMPSMBUS mode an amount of data in non-blocking mode - using HAL_FMPSMBUS_Master_Receive_IT() - (++) At reception end of transfer HAL_FMPSMBUS_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_MasterRxCpltCallback() - (+) Abort a master/host FMPSMBUS process communication with Interrupt using HAL_FMPSMBUS_Master_Abort_IT() - (++) The associated previous transfer callback is called at the end of abort process - (++) mean HAL_FMPSMBUS_MasterTxCpltCallback() in case of previous state was master transmit - (++) mean HAL_FMPSMBUS_MasterRxCpltCallback() in case of previous state was master receive - (+) Enable/disable the Address listen mode in slave/device or host/slave FMPSMBUS mode - using HAL_FMPSMBUS_EnableListen_IT() HAL_FMPSMBUS_DisableListen_IT() - (++) When address slave/device FMPSMBUS match, HAL_FMPSMBUS_AddrCallback() is executed and users can - add their own code to check the Address Match Code and the transmission direction - request by master/host (Write/Read). - (++) At Listen mode end HAL_FMPSMBUS_ListenCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_ListenCpltCallback() - (+) Transmit in slave/device FMPSMBUS mode an amount of data in non-blocking mode - using HAL_FMPSMBUS_Slave_Transmit_IT() - (++) At transmission end of transfer HAL_FMPSMBUS_SlaveTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_SlaveTxCpltCallback() - (+) Receive in slave/device FMPSMBUS mode an amount of data in non-blocking mode - using HAL_FMPSMBUS_Slave_Receive_IT() - (++) At reception end of transfer HAL_FMPSMBUS_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_SlaveRxCpltCallback() - (+) Enable/Disable the FMPSMBUS alert mode using - HAL_FMPSMBUS_EnableAlert_IT() or HAL_FMPSMBUS_DisableAlert_IT() - (++) When FMPSMBUS Alert is generated HAL_FMPSMBUS_ErrorCallback() is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_ErrorCallback() - to check the Alert Error Code using function HAL_FMPSMBUS_GetError() - (+) Get HAL state machine or error values using HAL_FMPSMBUS_GetState() or HAL_FMPSMBUS_GetError() - (+) In case of transfer Error, HAL_FMPSMBUS_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_FMPSMBUS_ErrorCallback() - to check the Error Code using function HAL_FMPSMBUS_GetError() - - *** FMPSMBUS HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in FMPSMBUS HAL driver. - - (+) __HAL_FMPSMBUS_ENABLE: Enable the FMPSMBUS peripheral - (+) __HAL_FMPSMBUS_DISABLE: Disable the FMPSMBUS peripheral - (+) __HAL_FMPSMBUS_GET_FLAG: Check whether the specified FMPSMBUS flag is set or not - (+) __HAL_FMPSMBUS_CLEAR_FLAG: Clear the specified FMPSMBUS pending flag - (+) __HAL_FMPSMBUS_ENABLE_IT: Enable the specified FMPSMBUS interrupt - (+) __HAL_FMPSMBUS_DISABLE_IT: Disable the specified FMPSMBUS interrupt - - *** Callback registration *** - ============================================= - [..] - The compilation flag USE_HAL_FMPSMBUS_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_FMPSMBUS_RegisterCallback() or HAL_FMPSMBUS_RegisterAddrCallback() - to register an interrupt callback. - [..] - Function HAL_FMPSMBUS_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) ErrorCallback : callback for error detection. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - For specific callback AddrCallback use dedicated register callbacks : HAL_FMPSMBUS_RegisterAddrCallback. - [..] - Use function HAL_FMPSMBUS_UnRegisterCallback to reset a callback to the default - weak function. - HAL_FMPSMBUS_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) ErrorCallback : callback for error detection. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - [..] - For callback AddrCallback use dedicated register callbacks : HAL_FMPSMBUS_UnRegisterAddrCallback. - [..] - By default, after the HAL_FMPSMBUS_Init() and when the state is HAL_FMPI2C_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_FMPSMBUS_MasterTxCpltCallback(), HAL_FMPSMBUS_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_FMPSMBUS_Init()/ HAL_FMPSMBUS_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_FMPSMBUS_Init()/ HAL_FMPSMBUS_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - Callbacks can be registered/unregistered in HAL_FMPI2C_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_FMPI2C_STATE_READY or HAL_FMPI2C_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_FMPSMBUS_RegisterCallback() before calling HAL_FMPSMBUS_DeInit() - or HAL_FMPSMBUS_Init() function. - [..] - When the compilation flag USE_HAL_FMPSMBUS_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - [..] - (@) You can refer to the FMPSMBUS HAL driver header file for more useful macros - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FMPSMBUS FMPSMBUS - * @brief FMPSMBUS HAL module driver - * @{ - */ - -#ifdef HAL_FMPSMBUS_MODULE_ENABLED - -#if defined(FMPI2C_CR1_PE) -/* Private typedef -----------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMPSMBUS_Private_Define FMPSMBUS Private Constants - * @{ - */ -#define TIMING_CLEAR_MASK (0xF0FFFFFFUL) /*!< FMPSMBUS TIMING clear register Mask */ -#define HAL_TIMEOUT_ADDR (10000U) /*!< 10 s */ -#define HAL_TIMEOUT_BUSY (25U) /*!< 25 ms */ -#define HAL_TIMEOUT_DIR (25U) /*!< 25 ms */ -#define HAL_TIMEOUT_RXNE (25U) /*!< 25 ms */ -#define HAL_TIMEOUT_STOPF (25U) /*!< 25 ms */ -#define HAL_TIMEOUT_TC (25U) /*!< 25 ms */ -#define HAL_TIMEOUT_TCR (25U) /*!< 25 ms */ -#define HAL_TIMEOUT_TXIS (25U) /*!< 25 ms */ -#define MAX_NBYTE_SIZE 255U -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FMPSMBUS_Private_Functions FMPSMBUS Private Functions - * @{ - */ -static HAL_StatusTypeDef FMPSMBUS_WaitOnFlagUntilTimeout(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t Flag, - FlagStatus Status, uint32_t Timeout); - -static void FMPSMBUS_Enable_IRQ(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t InterruptRequest); -static void FMPSMBUS_Disable_IRQ(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t InterruptRequest); -static HAL_StatusTypeDef FMPSMBUS_Master_ISR(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t StatusFlags); -static HAL_StatusTypeDef FMPSMBUS_Slave_ISR(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t StatusFlags); - -static void FMPSMBUS_ConvertOtherXferOptions(FMPSMBUS_HandleTypeDef *hfmpsmbus); - -static void FMPSMBUS_ITErrorHandler(FMPSMBUS_HandleTypeDef *hfmpsmbus); - -static void FMPSMBUS_TransferConfig(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, uint8_t Size, - uint32_t Mode, uint32_t Request); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup FMPSMBUS_Exported_Functions FMPSMBUS Exported Functions - * @{ - */ - -/** @defgroup FMPSMBUS_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the FMPSMBUSx peripheral: - - (+) User must Implement HAL_FMPSMBUS_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, IT and NVIC ). - - (+) Call the function HAL_FMPSMBUS_Init() to configure the selected device with - the selected configuration: - (++) Clock Timing - (++) Bus Timeout - (++) Analog Filer mode - (++) Own Address 1 - (++) Addressing mode (Master, Slave) - (++) Dual Addressing mode - (++) Own Address 2 - (++) Own Address 2 Mask - (++) General call mode - (++) Nostretch mode - (++) Packet Error Check mode - (++) Peripheral mode - - - (+) Call the function HAL_FMPSMBUS_DeInit() to restore the default configuration - of the selected FMPSMBUSx peripheral. - - (+) Enable/Disable Analog/Digital filters with HAL_FMPSMBUS_ConfigAnalogFilter() and - HAL_FMPSMBUS_ConfigDigitalFilter(). - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the FMPSMBUS according to the specified parameters - * in the FMPSMBUS_InitTypeDef and initialize the associated handle. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_Init(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Check the FMPSMBUS handle allocation */ - if (hfmpsmbus == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_FMPSMBUS_ALL_INSTANCE(hfmpsmbus->Instance)); - assert_param(IS_FMPSMBUS_ANALOG_FILTER(hfmpsmbus->Init.AnalogFilter)); - assert_param(IS_FMPSMBUS_OWN_ADDRESS1(hfmpsmbus->Init.OwnAddress1)); - assert_param(IS_FMPSMBUS_ADDRESSING_MODE(hfmpsmbus->Init.AddressingMode)); - assert_param(IS_FMPSMBUS_DUAL_ADDRESS(hfmpsmbus->Init.DualAddressMode)); - assert_param(IS_FMPSMBUS_OWN_ADDRESS2(hfmpsmbus->Init.OwnAddress2)); - assert_param(IS_FMPSMBUS_OWN_ADDRESS2_MASK(hfmpsmbus->Init.OwnAddress2Masks)); - assert_param(IS_FMPSMBUS_GENERAL_CALL(hfmpsmbus->Init.GeneralCallMode)); - assert_param(IS_FMPSMBUS_NO_STRETCH(hfmpsmbus->Init.NoStretchMode)); - assert_param(IS_FMPSMBUS_PEC(hfmpsmbus->Init.PacketErrorCheckMode)); - assert_param(IS_FMPSMBUS_PERIPHERAL_MODE(hfmpsmbus->Init.PeripheralMode)); - - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hfmpsmbus->Lock = HAL_UNLOCKED; - -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterTxCpltCallback = HAL_FMPSMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hfmpsmbus->MasterRxCpltCallback = HAL_FMPSMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hfmpsmbus->SlaveTxCpltCallback = HAL_FMPSMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hfmpsmbus->SlaveRxCpltCallback = HAL_FMPSMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hfmpsmbus->ListenCpltCallback = HAL_FMPSMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hfmpsmbus->ErrorCallback = HAL_FMPSMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ - hfmpsmbus->AddrCallback = HAL_FMPSMBUS_AddrCallback; /* Legacy weak AddrCallback */ - - if (hfmpsmbus->MspInitCallback == NULL) - { - hfmpsmbus->MspInitCallback = HAL_FMPSMBUS_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - hfmpsmbus->MspInitCallback(hfmpsmbus); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_FMPSMBUS_MspInit(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_BUSY; - - /* Disable the selected FMPSMBUS peripheral */ - __HAL_FMPSMBUS_DISABLE(hfmpsmbus); - - /*---------------------------- FMPSMBUSx TIMINGR Configuration ------------------------*/ - /* Configure FMPSMBUSx: Frequency range */ - hfmpsmbus->Instance->TIMINGR = hfmpsmbus->Init.Timing & TIMING_CLEAR_MASK; - - /*---------------------------- FMPSMBUSx TIMEOUTR Configuration ------------------------*/ - /* Configure FMPSMBUSx: Bus Timeout */ - hfmpsmbus->Instance->TIMEOUTR &= ~FMPI2C_TIMEOUTR_TIMOUTEN; - hfmpsmbus->Instance->TIMEOUTR &= ~FMPI2C_TIMEOUTR_TEXTEN; - hfmpsmbus->Instance->TIMEOUTR = hfmpsmbus->Init.SMBusTimeout; - - /*---------------------------- FMPSMBUSx OAR1 Configuration -----------------------*/ - /* Configure FMPSMBUSx: Own Address1 and ack own address1 mode */ - hfmpsmbus->Instance->OAR1 &= ~FMPI2C_OAR1_OA1EN; - - if (hfmpsmbus->Init.OwnAddress1 != 0UL) - { - if (hfmpsmbus->Init.AddressingMode == FMPSMBUS_ADDRESSINGMODE_7BIT) - { - hfmpsmbus->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | hfmpsmbus->Init.OwnAddress1); - } - else /* FMPSMBUS_ADDRESSINGMODE_10BIT */ - { - hfmpsmbus->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | FMPI2C_OAR1_OA1MODE | hfmpsmbus->Init.OwnAddress1); - } - } - - /*---------------------------- FMPSMBUSx CR2 Configuration ------------------------*/ - /* Configure FMPSMBUSx: Addressing Master mode */ - if (hfmpsmbus->Init.AddressingMode == FMPSMBUS_ADDRESSINGMODE_10BIT) - { - hfmpsmbus->Instance->CR2 = (FMPI2C_CR2_ADD10); - } - /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process) */ - /* AUTOEND and NACK bit will be manage during Transfer process */ - hfmpsmbus->Instance->CR2 |= (FMPI2C_CR2_AUTOEND | FMPI2C_CR2_NACK); - - /*---------------------------- FMPSMBUSx OAR2 Configuration -----------------------*/ - /* Configure FMPSMBUSx: Dual mode and Own Address2 */ - hfmpsmbus->Instance->OAR2 = (hfmpsmbus->Init.DualAddressMode | hfmpsmbus->Init.OwnAddress2 | \ - (hfmpsmbus->Init.OwnAddress2Masks << 8U)); - - /*---------------------------- FMPSMBUSx CR1 Configuration ------------------------*/ - /* Configure FMPSMBUSx: Generalcall and NoStretch mode */ - hfmpsmbus->Instance->CR1 = (hfmpsmbus->Init.GeneralCallMode | hfmpsmbus->Init.NoStretchMode | \ - hfmpsmbus->Init.PacketErrorCheckMode | hfmpsmbus->Init.PeripheralMode | \ - hfmpsmbus->Init.AnalogFilter); - - /* Enable Slave Byte Control only in case of Packet Error Check is enabled - and FMPSMBUS Peripheral is set in Slave mode */ - if ((hfmpsmbus->Init.PacketErrorCheckMode == FMPSMBUS_PEC_ENABLE) && \ - ((hfmpsmbus->Init.PeripheralMode == FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_SLAVE) || \ - (hfmpsmbus->Init.PeripheralMode == FMPSMBUS_PERIPHERAL_MODE_FMPSMBUS_SLAVE_ARP))) - { - hfmpsmbus->Instance->CR1 |= FMPI2C_CR1_SBC; - } - - /* Enable the selected FMPSMBUS peripheral */ - __HAL_FMPSMBUS_ENABLE(hfmpsmbus); - - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - hfmpsmbus->PreviousState = HAL_FMPSMBUS_STATE_READY; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitialize the FMPSMBUS peripheral. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_DeInit(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Check the FMPSMBUS handle allocation */ - if (hfmpsmbus == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_FMPSMBUS_ALL_INSTANCE(hfmpsmbus->Instance)); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_BUSY; - - /* Disable the FMPSMBUS Peripheral Clock */ - __HAL_FMPSMBUS_DISABLE(hfmpsmbus); - -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - if (hfmpsmbus->MspDeInitCallback == NULL) - { - hfmpsmbus->MspDeInitCallback = HAL_FMPSMBUS_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hfmpsmbus->MspDeInitCallback(hfmpsmbus); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_FMPSMBUS_MspDeInit(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - hfmpsmbus->PreviousState = HAL_FMPSMBUS_STATE_RESET; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_OK; -} - -/** - * @brief Initialize the FMPSMBUS MSP. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_MspInit(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the FMPSMBUS MSP. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_MspDeInit(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Configure Analog noise filter. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param AnalogFilter This parameter can be one of the following values: - * @arg @ref FMPSMBUS_ANALOGFILTER_ENABLE - * @arg @ref FMPSMBUS_ANALOGFILTER_DISABLE - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_ConfigAnalogFilter(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_FMPSMBUS_ALL_INSTANCE(hfmpsmbus->Instance)); - assert_param(IS_FMPSMBUS_ANALOG_FILTER(AnalogFilter)); - - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_BUSY; - - /* Disable the selected FMPSMBUS peripheral */ - __HAL_FMPSMBUS_DISABLE(hfmpsmbus); - - /* Reset ANOFF bit */ - hfmpsmbus->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF); - - /* Set analog filter bit*/ - hfmpsmbus->Instance->CR1 |= AnalogFilter; - - __HAL_FMPSMBUS_ENABLE(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configure Digital noise filter. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_ConfigDigitalFilter(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t DigitalFilter) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_FMPSMBUS_ALL_INSTANCE(hfmpsmbus->Instance)); - assert_param(IS_FMPSMBUS_DIGITAL_FILTER(DigitalFilter)); - - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_BUSY; - - /* Disable the selected FMPSMBUS peripheral */ - __HAL_FMPSMBUS_DISABLE(hfmpsmbus); - - /* Get the old register value */ - tmpreg = hfmpsmbus->Instance->CR1; - - /* Reset FMPI2C DNF bits [11:8] */ - tmpreg &= ~(FMPI2C_CR1_DNF); - - /* Set FMPI2Cx DNF coefficient */ - tmpreg |= DigitalFilter << FMPI2C_CR1_DNF_Pos; - - /* Store the new register value */ - hfmpsmbus->Instance->CR1 = tmpreg; - - __HAL_FMPSMBUS_ENABLE(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User FMPSMBUS Callback - * To be used instead of the weak predefined callback - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_FMPSMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_FMPSMBUS_ERROR_CB_ID Error callback ID - * @arg @ref HAL_FMPSMBUS_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_FMPSMBUS_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_RegisterCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, - HAL_FMPSMBUS_CallbackIDTypeDef CallbackID, - pFMPSMBUS_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hfmpsmbus); - - if (HAL_FMPSMBUS_STATE_READY == hfmpsmbus->State) - { - switch (CallbackID) - { - case HAL_FMPSMBUS_MASTER_TX_COMPLETE_CB_ID : - hfmpsmbus->MasterTxCpltCallback = pCallback; - break; - - case HAL_FMPSMBUS_MASTER_RX_COMPLETE_CB_ID : - hfmpsmbus->MasterRxCpltCallback = pCallback; - break; - - case HAL_FMPSMBUS_SLAVE_TX_COMPLETE_CB_ID : - hfmpsmbus->SlaveTxCpltCallback = pCallback; - break; - - case HAL_FMPSMBUS_SLAVE_RX_COMPLETE_CB_ID : - hfmpsmbus->SlaveRxCpltCallback = pCallback; - break; - - case HAL_FMPSMBUS_LISTEN_COMPLETE_CB_ID : - hfmpsmbus->ListenCpltCallback = pCallback; - break; - - case HAL_FMPSMBUS_ERROR_CB_ID : - hfmpsmbus->ErrorCallback = pCallback; - break; - - case HAL_FMPSMBUS_MSPINIT_CB_ID : - hfmpsmbus->MspInitCallback = pCallback; - break; - - case HAL_FMPSMBUS_MSPDEINIT_CB_ID : - hfmpsmbus->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_FMPSMBUS_STATE_RESET == hfmpsmbus->State) - { - switch (CallbackID) - { - case HAL_FMPSMBUS_MSPINIT_CB_ID : - hfmpsmbus->MspInitCallback = pCallback; - break; - - case HAL_FMPSMBUS_MSPDEINIT_CB_ID : - hfmpsmbus->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpsmbus); - return status; -} - -/** - * @brief Unregister an FMPSMBUS Callback - * FMPSMBUS callback is redirected to the weak predefined callback - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_FMPSMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_FMPSMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_FMPSMBUS_ERROR_CB_ID Error callback ID - * @arg @ref HAL_FMPSMBUS_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_FMPSMBUS_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_UnRegisterCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, - HAL_FMPSMBUS_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hfmpsmbus); - - if (HAL_FMPSMBUS_STATE_READY == hfmpsmbus->State) - { - switch (CallbackID) - { - case HAL_FMPSMBUS_MASTER_TX_COMPLETE_CB_ID : - hfmpsmbus->MasterTxCpltCallback = HAL_FMPSMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_FMPSMBUS_MASTER_RX_COMPLETE_CB_ID : - hfmpsmbus->MasterRxCpltCallback = HAL_FMPSMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_FMPSMBUS_SLAVE_TX_COMPLETE_CB_ID : - hfmpsmbus->SlaveTxCpltCallback = HAL_FMPSMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_FMPSMBUS_SLAVE_RX_COMPLETE_CB_ID : - hfmpsmbus->SlaveRxCpltCallback = HAL_FMPSMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_FMPSMBUS_LISTEN_COMPLETE_CB_ID : - hfmpsmbus->ListenCpltCallback = HAL_FMPSMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_FMPSMBUS_ERROR_CB_ID : - hfmpsmbus->ErrorCallback = HAL_FMPSMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_FMPSMBUS_MSPINIT_CB_ID : - hfmpsmbus->MspInitCallback = HAL_FMPSMBUS_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_FMPSMBUS_MSPDEINIT_CB_ID : - hfmpsmbus->MspDeInitCallback = HAL_FMPSMBUS_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_FMPSMBUS_STATE_RESET == hfmpsmbus->State) - { - switch (CallbackID) - { - case HAL_FMPSMBUS_MSPINIT_CB_ID : - hfmpsmbus->MspInitCallback = HAL_FMPSMBUS_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_FMPSMBUS_MSPDEINIT_CB_ID : - hfmpsmbus->MspDeInitCallback = HAL_FMPSMBUS_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpsmbus); - return status; -} - -/** - * @brief Register the Slave Address Match FMPSMBUS Callback - * To be used instead of the weak HAL_FMPSMBUS_AddrCallback() predefined callback - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_RegisterAddrCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, - pFMPSMBUS_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hfmpsmbus); - - if (HAL_FMPSMBUS_STATE_READY == hfmpsmbus->State) - { - hfmpsmbus->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpsmbus); - return status; -} - -/** - * @brief UnRegister the Slave Address Match FMPSMBUS Callback - * Info Ready FMPSMBUS Callback is redirected to the weak HAL_FMPSMBUS_AddrCallback() predefined callback - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_UnRegisterAddrCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hfmpsmbus); - - if (HAL_FMPSMBUS_STATE_READY == hfmpsmbus->State) - { - hfmpsmbus->AddrCallback = HAL_FMPSMBUS_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hfmpsmbus); - return status; -} - -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup FMPSMBUS_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FMPSMBUS data - transfers. - - (#) Blocking mode function to check if device is ready for usage is : - (++) HAL_FMPSMBUS_IsDeviceReady() - - (#) There is only one mode of transfer: - (++) Non-Blocking mode : The communication is performed using Interrupts. - These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated FMPSMBUS IRQ when using Interrupt mode. - - (#) Non-Blocking mode functions with Interrupt are : - (++) HAL_FMPSMBUS_Master_Transmit_IT() - (++) HAL_FMPSMBUS_Master_Receive_IT() - (++) HAL_FMPSMBUS_Slave_Transmit_IT() - (++) HAL_FMPSMBUS_Slave_Receive_IT() - (++) HAL_FMPSMBUS_EnableListen_IT() or alias HAL_FMPSMBUS_EnableListen_IT() - (++) HAL_FMPSMBUS_DisableListen_IT() - (++) HAL_FMPSMBUS_EnableAlert_IT() - (++) HAL_FMPSMBUS_DisableAlert_IT() - - (#) A set of Transfer Complete Callbacks are provided in non-Blocking mode: - (++) HAL_FMPSMBUS_MasterTxCpltCallback() - (++) HAL_FMPSMBUS_MasterRxCpltCallback() - (++) HAL_FMPSMBUS_SlaveTxCpltCallback() - (++) HAL_FMPSMBUS_SlaveRxCpltCallback() - (++) HAL_FMPSMBUS_AddrCallback() - (++) HAL_FMPSMBUS_ListenCpltCallback() - (++) HAL_FMPSMBUS_ErrorCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmit in master/host FMPSMBUS mode an amount of data in non-blocking mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPSMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_Master_Transmit_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, - uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_FMPSMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_MASTER_BUSY_TX; - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - /* Prepare transfer parameters */ - hfmpsmbus->pBuffPtr = pData; - hfmpsmbus->XferCount = Size; - hfmpsmbus->XferOptions = XferOptions; - - /* In case of Quick command, remove autoend mode */ - /* Manage the stop generation by software */ - if (hfmpsmbus->pBuffPtr == NULL) - { - hfmpsmbus->XferOptions &= ~FMPSMBUS_AUTOEND_MODE; - } - - if (Size > MAX_NBYTE_SIZE) - { - hfmpsmbus->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpsmbus->XferSize = Size; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ - if ((hfmpsmbus->XferSize < hfmpsmbus->XferCount) && (hfmpsmbus->XferSize == MAX_NBYTE_SIZE)) - { - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, - FMPSMBUS_RELOAD_MODE | (hfmpsmbus->XferOptions & FMPSMBUS_SENDPEC_MODE), - FMPSMBUS_GENERATE_START_WRITE); - } - else - { - /* If transfer direction not change, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - - /* Store current volatile XferOptions, misra rule */ - tmp = hfmpsmbus->XferOptions; - - if ((hfmpsmbus->PreviousState == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) && \ - (IS_FMPSMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) - { - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, hfmpsmbus->XferOptions, - FMPSMBUS_NO_STARTSTOP); - } - /* Else transfer direction change, so generate Restart with new transfer direction */ - else - { - /* Convert OTHER_xxx XferOptions if any */ - FMPSMBUS_ConvertOtherXferOptions(hfmpsmbus); - - /* Handle Transfer */ - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, - hfmpsmbus->XferOptions, - FMPSMBUS_GENERATE_START_WRITE); - } - - /* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */ - /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ - if (FMPSMBUS_GET_PEC_MODE(hfmpsmbus) != 0UL) - { - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Note : The FMPSMBUS interrupts must be enabled after unlocking current process - to avoid the risk of FMPSMBUS interrupt handle execution before current - process unlock */ - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master/host FMPSMBUS mode an amount of data in non-blocking mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPSMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_Master_Receive_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_FMPSMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_MASTER_BUSY_RX; - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - - /* Prepare transfer parameters */ - hfmpsmbus->pBuffPtr = pData; - hfmpsmbus->XferCount = Size; - hfmpsmbus->XferOptions = XferOptions; - - /* In case of Quick command, remove autoend mode */ - /* Manage the stop generation by software */ - if (hfmpsmbus->pBuffPtr == NULL) - { - hfmpsmbus->XferOptions &= ~FMPSMBUS_AUTOEND_MODE; - } - - if (Size > MAX_NBYTE_SIZE) - { - hfmpsmbus->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpsmbus->XferSize = Size; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ - if ((hfmpsmbus->XferSize < hfmpsmbus->XferCount) && (hfmpsmbus->XferSize == MAX_NBYTE_SIZE)) - { - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, - FMPSMBUS_RELOAD_MODE | (hfmpsmbus->XferOptions & FMPSMBUS_SENDPEC_MODE), - FMPSMBUS_GENERATE_START_READ); - } - else - { - /* If transfer direction not change, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - - /* Store current volatile XferOptions, Misra rule */ - tmp = hfmpsmbus->XferOptions; - - if ((hfmpsmbus->PreviousState == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) && \ - (IS_FMPSMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) - { - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, hfmpsmbus->XferOptions, - FMPSMBUS_NO_STARTSTOP); - } - /* Else transfer direction change, so generate Restart with new transfer direction */ - else - { - /* Convert OTHER_xxx XferOptions if any */ - FMPSMBUS_ConvertOtherXferOptions(hfmpsmbus); - - /* Handle Transfer */ - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, - hfmpsmbus->XferOptions, - FMPSMBUS_GENERATE_START_READ); - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Note : The FMPSMBUS interrupts must be enabled after unlocking current process - to avoid the risk of FMPSMBUS interrupt handle execution before current - process unlock */ - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master/host FMPSMBUS process communication with Interrupt. - * @note This abort can be called only if state is ready - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_Master_Abort_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress) -{ - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - /* Keep the same state as previous */ - /* to perform as well the call of the corresponding end of transfer callback */ - if (hfmpsmbus->PreviousState == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) - { - hfmpsmbus->State = HAL_FMPSMBUS_STATE_MASTER_BUSY_TX; - } - else if (hfmpsmbus->PreviousState == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) - { - hfmpsmbus->State = HAL_FMPSMBUS_STATE_MASTER_BUSY_RX; - } - else - { - /* Wrong usage of abort function */ - /* This function should be used only in case of abort monitored by master device */ - return HAL_ERROR; - } - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - - /* Set NBYTES to 1 to generate a dummy read on FMPSMBUS peripheral */ - /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, 1, FMPSMBUS_AUTOEND_MODE, FMPSMBUS_NO_STARTSTOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Note : The FMPSMBUS interrupts must be enabled after unlocking current process - to avoid the risk of FMPSMBUS interrupt handle execution before current - process unlock */ - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) - { - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX); - } - else if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) - { - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX); - } - else - { - /* Nothing to do */ - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave/device FMPSMBUS mode an amount of data in non-blocking mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPSMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_Slave_Transmit_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_FMPSMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_LISTEN) == HAL_FMPSMBUS_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0UL)) - { - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_ADDR | FMPSMBUS_IT_TX); - - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = (HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX | HAL_FMPSMBUS_STATE_LISTEN); - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - - /* Set SBC bit to manage Acknowledge at each bit */ - hfmpsmbus->Instance->CR1 |= FMPI2C_CR1_SBC; - - /* Enable Address Acknowledge */ - hfmpsmbus->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpsmbus->pBuffPtr = pData; - hfmpsmbus->XferCount = Size; - hfmpsmbus->XferOptions = XferOptions; - - /* Convert OTHER_xxx XferOptions if any */ - FMPSMBUS_ConvertOtherXferOptions(hfmpsmbus); - - if (Size > MAX_NBYTE_SIZE) - { - hfmpsmbus->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpsmbus->XferSize = Size; - } - - /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ - if ((hfmpsmbus->XferSize < hfmpsmbus->XferCount) && (hfmpsmbus->XferSize == MAX_NBYTE_SIZE)) - { - FMPSMBUS_TransferConfig(hfmpsmbus, 0, (uint8_t)hfmpsmbus->XferSize, - FMPSMBUS_RELOAD_MODE | (hfmpsmbus->XferOptions & FMPSMBUS_SENDPEC_MODE), - FMPSMBUS_NO_STARTSTOP); - } - else - { - /* Set NBYTE to transmit */ - FMPSMBUS_TransferConfig(hfmpsmbus, 0, (uint8_t)hfmpsmbus->XferSize, hfmpsmbus->XferOptions, - FMPSMBUS_NO_STARTSTOP); - - /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ - /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ - if (FMPSMBUS_GET_PEC_MODE(hfmpsmbus) != 0UL) - { - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - } - - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the HOST */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Note : The FMPSMBUS interrupts must be enabled after unlocking current process - to avoid the risk of FMPSMBUS interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX | FMPSMBUS_IT_ADDR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave/device FMPSMBUS mode an amount of data in non-blocking mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref FMPSMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_Slave_Receive_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_FMPSMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_LISTEN) == HAL_FMPSMBUS_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0UL)) - { - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_ADDR | FMPSMBUS_IT_RX); - - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = (HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX | HAL_FMPSMBUS_STATE_LISTEN); - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - - /* Set SBC bit to manage Acknowledge at each bit */ - hfmpsmbus->Instance->CR1 |= FMPI2C_CR1_SBC; - - /* Enable Address Acknowledge */ - hfmpsmbus->Instance->CR2 &= ~FMPI2C_CR2_NACK; - - /* Prepare transfer parameters */ - hfmpsmbus->pBuffPtr = pData; - hfmpsmbus->XferSize = Size; - hfmpsmbus->XferCount = Size; - hfmpsmbus->XferOptions = XferOptions; - - /* Convert OTHER_xxx XferOptions if any */ - FMPSMBUS_ConvertOtherXferOptions(hfmpsmbus); - - /* Set NBYTE to receive */ - /* If XferSize equal "1", or XferSize equal "2" with PEC requested (mean 1 data byte + 1 PEC byte */ - /* no need to set RELOAD bit mode, a ACK will be automatically generated in that case */ - /* else need to set RELOAD bit mode to generate an automatic ACK at each byte Received */ - /* This RELOAD bit will be reset for last BYTE to be receive in FMPSMBUS_Slave_ISR */ - if (((FMPSMBUS_GET_PEC_MODE(hfmpsmbus) != 0UL) && (hfmpsmbus->XferSize == 2U)) || (hfmpsmbus->XferSize == 1U)) - { - FMPSMBUS_TransferConfig(hfmpsmbus, 0, (uint8_t)hfmpsmbus->XferSize, hfmpsmbus->XferOptions, - FMPSMBUS_NO_STARTSTOP); - } - else - { - FMPSMBUS_TransferConfig(hfmpsmbus, 0, 1, hfmpsmbus->XferOptions | FMPSMBUS_RELOAD_MODE, FMPSMBUS_NO_STARTSTOP); - } - - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the HOST */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Note : The FMPSMBUS interrupts must be enabled after unlocking current process - to avoid the risk of FMPSMBUS interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX | FMPSMBUS_IT_ADDR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_EnableListen_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - hfmpsmbus->State = HAL_FMPSMBUS_STATE_LISTEN; - - /* Enable the Address Match interrupt */ - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_ADDR); - - return HAL_OK; -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_DisableListen_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_LISTEN) - { - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Disable the Address Match interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_ADDR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the FMPSMBUS alert mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUSx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_EnableAlert_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Enable SMBus alert */ - hfmpsmbus->Instance->CR1 |= FMPI2C_CR1_ALERTEN; - - /* Clear ALERT flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_ALERT); - - /* Enable Alert Interrupt */ - FMPSMBUS_Enable_IRQ(hfmpsmbus, FMPSMBUS_IT_ALERT); - - return HAL_OK; -} -/** - * @brief Disable the FMPSMBUS alert mode with Interrupt. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUSx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_DisableAlert_IT(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Enable SMBus alert */ - hfmpsmbus->Instance->CR1 &= ~FMPI2C_CR1_ALERTEN; - - /* Disable Alert Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_ALERT); - - return HAL_OK; -} - -/** - * @brief Check if target device is ready for communication. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_FMPSMBUS_IsDeviceReady(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, uint32_t Trials, - uint32_t Timeout) -{ - uint32_t tickstart; - - __IO uint32_t FMPSMBUS_Trials = 0UL; - - FlagStatus tmp1; - FlagStatus tmp2; - - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_READY) - { - if (__HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_BUSY) != RESET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_BUSY; - hfmpsmbus->ErrorCode = HAL_FMPSMBUS_ERROR_NONE; - - do - { - /* Generate Start */ - hfmpsmbus->Instance->CR2 = FMPSMBUS_GENERATE_START(hfmpsmbus->Init.AddressingMode, DevAddress); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set or a NACK flag is set*/ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - tmp2 = __HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF); - - while ((tmp1 == RESET) && (tmp2 == RESET)) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) - { - /* Device is ready */ - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Update FMPSMBUS error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_HALTIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - return HAL_ERROR; - } - } - - tmp1 = __HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - tmp2 = __HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF); - } - - /* Check if the NACKF flag has not been set */ - if (__HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF) == RESET) - { - /* Wait until STOPF flag is reset */ - if (FMPSMBUS_WaitOnFlagUntilTimeout(hfmpsmbus, FMPSMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - - /* Device is ready */ - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_OK; - } - else - { - /* Wait until STOPF flag is reset */ - if (FMPSMBUS_WaitOnFlagUntilTimeout(hfmpsmbus, FMPSMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear NACK Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF); - - /* Clear STOP Flag, auto generated with autoend*/ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - } - - /* Check if the maximum allowed number of trials has been reached */ - if (FMPSMBUS_Trials == Trials) - { - /* Generate Stop */ - hfmpsmbus->Instance->CR2 |= FMPI2C_CR2_STOP; - - /* Wait until STOPF flag is reset */ - if (FMPSMBUS_WaitOnFlagUntilTimeout(hfmpsmbus, FMPSMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - } - - /* Increment Trials */ - FMPSMBUS_Trials++; - } while (FMPSMBUS_Trials < Trials); - - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Update FMPSMBUS error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_HALTIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} -/** - * @} - */ - -/** @defgroup FMPSMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ - -/** - * @brief Handle FMPSMBUS event interrupt request. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -void HAL_FMPSMBUS_EV_IRQHandler(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Use a local variable to store the current ISR flags */ - /* This action will avoid a wrong treatment due to ISR flags change during interrupt handler */ - uint32_t tmpisrvalue = READ_REG(hfmpsmbus->Instance->ISR); - uint32_t tmpcr1value = READ_REG(hfmpsmbus->Instance->CR1); - - /* FMPSMBUS in mode Transmitter ---------------------------------------------------*/ - if ((FMPSMBUS_CHECK_IT_SOURCE(tmpcr1value, (FMPSMBUS_IT_TCI | FMPSMBUS_IT_STOPI | - FMPSMBUS_IT_NACKI | FMPSMBUS_IT_TXI)) != RESET) && - ((FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_TXIS) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_TCR) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_TC) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_STOPF) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_AF) != RESET))) - { - /* Slave mode selected */ - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX) == HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX) - { - (void)FMPSMBUS_Slave_ISR(hfmpsmbus, tmpisrvalue); - } - /* Master mode selected */ - else if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) - { - (void)FMPSMBUS_Master_ISR(hfmpsmbus, tmpisrvalue); - } - else - { - /* Nothing to do */ - } - } - - /* FMPSMBUS in mode Receiver ----------------------------------------------------*/ - if ((FMPSMBUS_CHECK_IT_SOURCE(tmpcr1value, (FMPSMBUS_IT_TCI | FMPSMBUS_IT_STOPI | - FMPSMBUS_IT_NACKI | FMPSMBUS_IT_RXI)) != RESET) && - ((FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_RXNE) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_TCR) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_TC) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_STOPF) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_AF) != RESET))) - { - /* Slave mode selected */ - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX) == HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX) - { - (void)FMPSMBUS_Slave_ISR(hfmpsmbus, tmpisrvalue); - } - /* Master mode selected */ - else if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) - { - (void)FMPSMBUS_Master_ISR(hfmpsmbus, tmpisrvalue); - } - else - { - /* Nothing to do */ - } - } - - /* FMPSMBUS in mode Listener Only --------------------------------------------------*/ - if (((FMPSMBUS_CHECK_IT_SOURCE(tmpcr1value, FMPSMBUS_IT_ADDRI) != RESET) || - (FMPSMBUS_CHECK_IT_SOURCE(tmpcr1value, FMPSMBUS_IT_STOPI) != RESET) || - (FMPSMBUS_CHECK_IT_SOURCE(tmpcr1value, FMPSMBUS_IT_NACKI) != RESET)) && - ((FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_ADDR) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_STOPF) != RESET) || - (FMPSMBUS_CHECK_FLAG(tmpisrvalue, FMPSMBUS_FLAG_AF) != RESET))) - { - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_LISTEN) == HAL_FMPSMBUS_STATE_LISTEN) - { - (void)FMPSMBUS_Slave_ISR(hfmpsmbus, tmpisrvalue); - } - } -} - -/** - * @brief Handle FMPSMBUS error interrupt request. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -void HAL_FMPSMBUS_ER_IRQHandler(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - FMPSMBUS_ITErrorHandler(hfmpsmbus); -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_MasterTxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_MasterTxCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_MasterRxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_MasterRxCpltCallback() could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_SlaveTxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_SlaveTxCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_SlaveRxCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_SlaveRxCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param TransferDirection Master request Transfer Direction (Write/Read) - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_FMPSMBUS_AddrCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint8_t TransferDirection, - uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_AddrCallback() could be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_ListenCpltCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_ListenCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief FMPSMBUS error callback. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval None - */ -__weak void HAL_FMPSMBUS_ErrorCallback(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hfmpsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FMPSMBUS_ErrorCallback() could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FMPSMBUS_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the FMPSMBUS handle state. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval HAL state - */ -uint32_t HAL_FMPSMBUS_GetState(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* Return FMPSMBUS handle state */ - return hfmpsmbus->State; -} - -/** - * @brief Return the FMPSMBUS error code. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @retval FMPSMBUS Error Code - */ -uint32_t HAL_FMPSMBUS_GetError(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - return hfmpsmbus->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FMPSMBUS_Private_Functions FMPSMBUS Private Functions - * @brief Data transfers Private functions - * @{ - */ - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param StatusFlags Value of Interrupt Flags. - * @retval HAL status - */ -static HAL_StatusTypeDef FMPSMBUS_Master_ISR(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t StatusFlags) -{ - uint16_t DevAddress; - - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_AF) != RESET) - { - /* Clear NACK Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF); - - /* Set corresponding Error Code */ - /* No need to generate STOP, it is automatically done */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_ACKF; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the Error callback to inform upper layer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->ErrorCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_ErrorCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_STOPF) != RESET) - { - /* Check and treat errors if errors occurs during STOP process */ - FMPSMBUS_ITErrorHandler(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) - { - /* Disable Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX); - - /* Clear STOP Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPSMBUS_RESET_CR2(hfmpsmbus); - - /* Flush remaining data in Fifo register in case of error occurs before TXEmpty */ - /* Disable the selected FMPSMBUS peripheral */ - __HAL_FMPSMBUS_DISABLE(hfmpsmbus); - - hfmpsmbus->PreviousState = HAL_FMPSMBUS_STATE_READY; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Re-enable the selected FMPSMBUS peripheral */ - __HAL_FMPSMBUS_ENABLE(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterTxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_MasterTxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) - { - /* Store Last receive data if any */ - if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hfmpsmbus->pBuffPtr = (uint8_t)(hfmpsmbus->Instance->RXDR); - - /* Increment Buffer pointer */ - hfmpsmbus->pBuffPtr++; - - if ((hfmpsmbus->XferSize > 0U)) - { - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - } - - /* Disable Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX); - - /* Clear STOP Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - FMPSMBUS_RESET_CR2(hfmpsmbus); - - hfmpsmbus->PreviousState = HAL_FMPSMBUS_STATE_READY; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterRxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_MasterRxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hfmpsmbus->pBuffPtr = (uint8_t)(hfmpsmbus->Instance->RXDR); - - /* Increment Buffer pointer */ - hfmpsmbus->pBuffPtr++; - - /* Increment Size counter */ - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_TXIS) != RESET) - { - /* Write data to TXDR */ - hfmpsmbus->Instance->TXDR = *hfmpsmbus->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpsmbus->pBuffPtr++; - - /* Increment Size counter */ - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_TCR) != RESET) - { - if ((hfmpsmbus->XferCount != 0U) && (hfmpsmbus->XferSize == 0U)) - { - DevAddress = (uint16_t)(hfmpsmbus->Instance->CR2 & FMPI2C_CR2_SADD); - - if (hfmpsmbus->XferCount > MAX_NBYTE_SIZE) - { - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, MAX_NBYTE_SIZE, - (FMPSMBUS_RELOAD_MODE | (hfmpsmbus->XferOptions & FMPSMBUS_SENDPEC_MODE)), - FMPSMBUS_NO_STARTSTOP); - hfmpsmbus->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpsmbus->XferSize = hfmpsmbus->XferCount; - FMPSMBUS_TransferConfig(hfmpsmbus, DevAddress, (uint8_t)hfmpsmbus->XferSize, hfmpsmbus->XferOptions, - FMPSMBUS_NO_STARTSTOP); - /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ - /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ - if (FMPSMBUS_GET_PEC_MODE(hfmpsmbus) != 0UL) - { - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - } - } - else if ((hfmpsmbus->XferCount == 0U) && (hfmpsmbus->XferSize == 0U)) - { - /* Call TxCpltCallback() if no stop mode is set */ - if (FMPSMBUS_GET_STOP_MODE(hfmpsmbus) != FMPSMBUS_AUTOEND_MODE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) - { - /* Disable Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX); - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterTxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_MasterTxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) - { - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX); - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterRxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_MasterRxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } - } - } - else - { - /* Nothing to do */ - } - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_TC) != RESET) - { - if (hfmpsmbus->XferCount == 0U) - { - /* Specific use case for Quick command */ - if (hfmpsmbus->pBuffPtr == NULL) - { - /* Generate a Stop command */ - hfmpsmbus->Instance->CR2 |= FMPI2C_CR2_STOP; - } - /* Call TxCpltCallback() if no stop mode is set */ - else if (FMPSMBUS_GET_STOP_MODE(hfmpsmbus) != FMPSMBUS_AUTOEND_MODE) - { - /* No Generate Stop, to permit restart mode */ - /* The stop will be done at the end of transfer, when FMPSMBUS_AUTOEND_MODE enable */ - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_TX) - { - /* Disable Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX); - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterTxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_MasterTxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else if (hfmpsmbus->State == HAL_FMPSMBUS_STATE_MASTER_BUSY_RX) - { - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX); - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->MasterRxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_MasterRxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } - } - else - { - /* Nothing to do */ - } - } - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_OK; -} -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param StatusFlags Value of Interrupt Flags. - * @retval HAL status - */ -static HAL_StatusTypeDef FMPSMBUS_Slave_ISR(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t StatusFlags) -{ - uint8_t TransferDirection; - uint16_t SlaveAddrCode; - - /* Process Locked */ - __HAL_LOCK(hfmpsmbus); - - if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_AF) != RESET) - { - /* Check that FMPSMBUS transfer finished */ - /* if yes, normal usecase, a NACK is sent by the HOST when Transfer is finished */ - /* Mean XferCount == 0*/ - /* So clear Flag NACKF only */ - if (hfmpsmbus->XferCount == 0U) - { - /* Clear NACK Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - } - else - { - /* if no, error usecase, a Non-Acknowledge of last Data is generated by the HOST*/ - /* Clear NACK Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_AF); - - /* Set HAL State to "Idle" State, mean to LISTEN state */ - /* So reset Slave Busy state */ - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State &= ~((uint32_t)HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX); - hfmpsmbus->State &= ~((uint32_t)HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX); - - /* Disable RX/TX Interrupts, keep only ADDR Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX | FMPSMBUS_IT_TX); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_ACKF; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the Error callback to inform upper layer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->ErrorCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_ErrorCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_ADDR) != RESET) - { - TransferDirection = (uint8_t)(FMPSMBUS_GET_DIR(hfmpsmbus)); - SlaveAddrCode = (uint16_t)(FMPSMBUS_GET_ADDR_MATCH(hfmpsmbus)); - - /* Disable ADDR interrupt to prevent multiple ADDRInterrupt*/ - /* Other ADDRInterrupt will be treat in next Listen usecase */ - __HAL_FMPSMBUS_DISABLE_IT(hfmpsmbus, FMPSMBUS_IT_ADDRI); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call Slave Addr callback */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->AddrCallback(hfmpsmbus, TransferDirection, SlaveAddrCode); -#else - HAL_FMPSMBUS_AddrCallback(hfmpsmbus, TransferDirection, SlaveAddrCode); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else if ((FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_RXNE) != RESET) || - (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_TCR) != RESET)) - { - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX) == HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX) - { - /* Read data from RXDR */ - *hfmpsmbus->pBuffPtr = (uint8_t)(hfmpsmbus->Instance->RXDR); - - /* Increment Buffer pointer */ - hfmpsmbus->pBuffPtr++; - - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - - if (hfmpsmbus->XferCount == 1U) - { - /* Receive last Byte, can be PEC byte in case of PEC BYTE enabled */ - /* or only the last Byte of Transfer */ - /* So reset the RELOAD bit mode */ - hfmpsmbus->XferOptions &= ~FMPSMBUS_RELOAD_MODE; - FMPSMBUS_TransferConfig(hfmpsmbus, 0, 1, hfmpsmbus->XferOptions, FMPSMBUS_NO_STARTSTOP); - } - else if (hfmpsmbus->XferCount == 0U) - { - /* Last Byte is received, disable Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX); - - /* Remove HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX, keep only HAL_FMPSMBUS_STATE_LISTEN */ - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State &= ~((uint32_t)HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->SlaveRxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_SlaveRxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - else - { - /* Set Reload for next Bytes */ - FMPSMBUS_TransferConfig(hfmpsmbus, 0, 1, - FMPSMBUS_RELOAD_MODE | (hfmpsmbus->XferOptions & FMPSMBUS_SENDPEC_MODE), - FMPSMBUS_NO_STARTSTOP); - - /* Ack last Byte Read */ - hfmpsmbus->Instance->CR2 &= ~FMPI2C_CR2_NACK; - } - } - else if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX) == HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX) - { - if ((hfmpsmbus->XferCount != 0U) && (hfmpsmbus->XferSize == 0U)) - { - if (hfmpsmbus->XferCount > MAX_NBYTE_SIZE) - { - FMPSMBUS_TransferConfig(hfmpsmbus, 0, MAX_NBYTE_SIZE, - (FMPSMBUS_RELOAD_MODE | (hfmpsmbus->XferOptions & FMPSMBUS_SENDPEC_MODE)), - FMPSMBUS_NO_STARTSTOP); - hfmpsmbus->XferSize = MAX_NBYTE_SIZE; - } - else - { - hfmpsmbus->XferSize = hfmpsmbus->XferCount; - FMPSMBUS_TransferConfig(hfmpsmbus, 0, (uint8_t)hfmpsmbus->XferSize, hfmpsmbus->XferOptions, - FMPSMBUS_NO_STARTSTOP); - /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ - /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ - if (FMPSMBUS_GET_PEC_MODE(hfmpsmbus) != 0UL) - { - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - } - } - } - else - { - /* Nothing to do */ - } - } - else if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_TXIS) != RESET) - { - /* Write data to TXDR only if XferCount not reach "0" */ - /* A TXIS flag can be set, during STOP treatment */ - /* Check if all Data have already been sent */ - /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ - if (hfmpsmbus->XferCount > 0U) - { - /* Write data to TXDR */ - hfmpsmbus->Instance->TXDR = *hfmpsmbus->pBuffPtr; - - /* Increment Buffer pointer */ - hfmpsmbus->pBuffPtr++; - - hfmpsmbus->XferCount--; - hfmpsmbus->XferSize--; - } - - if (hfmpsmbus->XferCount == 0U) - { - /* Last Byte is Transmitted */ - /* Remove HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX, keep only HAL_FMPSMBUS_STATE_LISTEN */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_TX); - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State &= ~((uint32_t)HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX); - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->SlaveTxCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_SlaveTxCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - } - else - { - /* Nothing to do */ - } - - /* Check if STOPF is set */ - if (FMPSMBUS_CHECK_FLAG(StatusFlags, FMPSMBUS_FLAG_STOPF) != RESET) - { - if ((hfmpsmbus->State & HAL_FMPSMBUS_STATE_LISTEN) == HAL_FMPSMBUS_STATE_LISTEN) - { - /* Store Last receive data if any */ - if (__HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, FMPSMBUS_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hfmpsmbus->pBuffPtr = (uint8_t)(hfmpsmbus->Instance->RXDR); - - /* Increment Buffer pointer */ - hfmpsmbus->pBuffPtr++; - - if ((hfmpsmbus->XferSize > 0U)) - { - hfmpsmbus->XferSize--; - hfmpsmbus->XferCount--; - } - } - - /* Disable RX and TX Interrupts */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_RX | FMPSMBUS_IT_TX); - - /* Disable ADDR Interrupt */ - FMPSMBUS_Disable_IRQ(hfmpsmbus, FMPSMBUS_IT_ADDR); - - /* Disable Address Acknowledge */ - hfmpsmbus->Instance->CR2 |= FMPI2C_CR2_NACK; - - /* Clear Configuration Register 2 */ - FMPSMBUS_RESET_CR2(hfmpsmbus); - - /* Clear STOP Flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_STOPF); - - /* Clear ADDR flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_ADDR); - - hfmpsmbus->XferOptions = 0; - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->ListenCpltCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_ListenCpltCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_OK; -} -/** - * @brief Manage the enabling of Interrupts. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param InterruptRequest Value of @ref FMPSMBUS_Interrupt_configuration_definition. - * @retval HAL status - */ -static void FMPSMBUS_Enable_IRQ(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t InterruptRequest) -{ - uint32_t tmpisr = 0UL; - - if ((InterruptRequest & FMPSMBUS_IT_ALERT) == FMPSMBUS_IT_ALERT) - { - /* Enable ERR interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI; - } - - if ((InterruptRequest & FMPSMBUS_IT_ADDR) == FMPSMBUS_IT_ADDR) - { - /* Enable ADDR, STOP interrupt */ - tmpisr |= FMPSMBUS_IT_ADDRI | FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI | FMPSMBUS_IT_ERRI; - } - - if ((InterruptRequest & FMPSMBUS_IT_TX) == FMPSMBUS_IT_TX) - { - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI | FMPSMBUS_IT_TCI | FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI | FMPSMBUS_IT_TXI; - } - - if ((InterruptRequest & FMPSMBUS_IT_RX) == FMPSMBUS_IT_RX) - { - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI | FMPSMBUS_IT_TCI | FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI | FMPSMBUS_IT_RXI; - } - - /* Enable interrupts only at the end */ - /* to avoid the risk of FMPSMBUS interrupt handle execution before */ - /* all interrupts requested done */ - __HAL_FMPSMBUS_ENABLE_IT(hfmpsmbus, tmpisr); -} -/** - * @brief Manage the disabling of Interrupts. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param InterruptRequest Value of @ref FMPSMBUS_Interrupt_configuration_definition. - * @retval HAL status - */ -static void FMPSMBUS_Disable_IRQ(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t InterruptRequest) -{ - uint32_t tmpisr = 0UL; - uint32_t tmpstate = hfmpsmbus->State; - - if ((tmpstate == HAL_FMPSMBUS_STATE_READY) && ((InterruptRequest & FMPSMBUS_IT_ALERT) == FMPSMBUS_IT_ALERT)) - { - /* Disable ERR interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI; - } - - if ((InterruptRequest & FMPSMBUS_IT_TX) == FMPSMBUS_IT_TX) - { - /* Disable TC, STOP, NACK and TXI interrupt */ - tmpisr |= FMPSMBUS_IT_TCI | FMPSMBUS_IT_TXI; - - if ((FMPSMBUS_GET_ALERT_ENABLED(hfmpsmbus) == 0UL) - && ((tmpstate & HAL_FMPSMBUS_STATE_LISTEN) != HAL_FMPSMBUS_STATE_LISTEN)) - { - /* Disable ERR interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI; - } - - if ((tmpstate & HAL_FMPSMBUS_STATE_LISTEN) != HAL_FMPSMBUS_STATE_LISTEN) - { - /* Disable STOP and NACK interrupt */ - tmpisr |= FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI; - } - } - - if ((InterruptRequest & FMPSMBUS_IT_RX) == FMPSMBUS_IT_RX) - { - /* Disable TC, STOP, NACK and RXI interrupt */ - tmpisr |= FMPSMBUS_IT_TCI | FMPSMBUS_IT_RXI; - - if ((FMPSMBUS_GET_ALERT_ENABLED(hfmpsmbus) == 0UL) - && ((tmpstate & HAL_FMPSMBUS_STATE_LISTEN) != HAL_FMPSMBUS_STATE_LISTEN)) - { - /* Disable ERR interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI; - } - - if ((tmpstate & HAL_FMPSMBUS_STATE_LISTEN) != HAL_FMPSMBUS_STATE_LISTEN) - { - /* Disable STOP and NACK interrupt */ - tmpisr |= FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI; - } - } - - if ((InterruptRequest & FMPSMBUS_IT_ADDR) == FMPSMBUS_IT_ADDR) - { - /* Disable ADDR, STOP and NACK interrupt */ - tmpisr |= FMPSMBUS_IT_ADDRI | FMPSMBUS_IT_STOPI | FMPSMBUS_IT_NACKI; - - if (FMPSMBUS_GET_ALERT_ENABLED(hfmpsmbus) == 0UL) - { - /* Disable ERR interrupt */ - tmpisr |= FMPSMBUS_IT_ERRI; - } - } - - /* Disable interrupts only at the end */ - /* to avoid a breaking situation like at "t" time */ - /* all disable interrupts request are not done */ - __HAL_FMPSMBUS_DISABLE_IT(hfmpsmbus, tmpisr); -} - -/** - * @brief FMPSMBUS interrupts error handler. - * @param hfmpsmbus FMPSMBUS handle. - * @retval None - */ -static void FMPSMBUS_ITErrorHandler(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - uint32_t itflags = READ_REG(hfmpsmbus->Instance->ISR); - uint32_t itsources = READ_REG(hfmpsmbus->Instance->CR1); - uint32_t tmpstate; - uint32_t tmperror; - - /* FMPSMBUS Bus error interrupt occurred ------------------------------------*/ - if (((itflags & FMPSMBUS_FLAG_BERR) == FMPSMBUS_FLAG_BERR) && \ - ((itsources & FMPSMBUS_IT_ERRI) == FMPSMBUS_IT_ERRI)) - { - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_BERR); - } - - /* FMPSMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/ - if (((itflags & FMPSMBUS_FLAG_OVR) == FMPSMBUS_FLAG_OVR) && \ - ((itsources & FMPSMBUS_IT_ERRI) == FMPSMBUS_IT_ERRI)) - { - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_OVR); - } - - /* FMPSMBUS Arbitration Loss error interrupt occurred ------------------------------------*/ - if (((itflags & FMPSMBUS_FLAG_ARLO) == FMPSMBUS_FLAG_ARLO) && \ - ((itsources & FMPSMBUS_IT_ERRI) == FMPSMBUS_IT_ERRI)) - { - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_ARLO); - } - - /* FMPSMBUS Timeout error interrupt occurred ---------------------------------------------*/ - if (((itflags & FMPSMBUS_FLAG_TIMEOUT) == FMPSMBUS_FLAG_TIMEOUT) && \ - ((itsources & FMPSMBUS_IT_ERRI) == FMPSMBUS_IT_ERRI)) - { - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_BUSTIMEOUT; - - /* Clear TIMEOUT flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_TIMEOUT); - } - - /* FMPSMBUS Alert error interrupt occurred -----------------------------------------------*/ - if (((itflags & FMPSMBUS_FLAG_ALERT) == FMPSMBUS_FLAG_ALERT) && \ - ((itsources & FMPSMBUS_IT_ERRI) == FMPSMBUS_IT_ERRI)) - { - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_ALERT; - - /* Clear ALERT flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_ALERT); - } - - /* FMPSMBUS Packet Error Check error interrupt occurred ----------------------------------*/ - if (((itflags & FMPSMBUS_FLAG_PECERR) == FMPSMBUS_FLAG_PECERR) && \ - ((itsources & FMPSMBUS_IT_ERRI) == FMPSMBUS_IT_ERRI)) - { - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_PECERR; - - /* Clear PEC error flag */ - __HAL_FMPSMBUS_CLEAR_FLAG(hfmpsmbus, FMPSMBUS_FLAG_PECERR); - } - - /* Store current volatile hfmpsmbus->State, misra rule */ - tmperror = hfmpsmbus->ErrorCode; - - /* Call the Error Callback in case of Error detected */ - if ((tmperror != HAL_FMPSMBUS_ERROR_NONE) && (tmperror != HAL_FMPSMBUS_ERROR_ACKF)) - { - /* Do not Reset the HAL state in case of ALERT error */ - if ((tmperror & HAL_FMPSMBUS_ERROR_ALERT) != HAL_FMPSMBUS_ERROR_ALERT) - { - /* Store current volatile hfmpsmbus->State, misra rule */ - tmpstate = hfmpsmbus->State; - - if (((tmpstate & HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX) == HAL_FMPSMBUS_STATE_SLAVE_BUSY_TX) - || ((tmpstate & HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX) == HAL_FMPSMBUS_STATE_SLAVE_BUSY_RX)) - { - /* Reset only HAL_FMPSMBUS_STATE_SLAVE_BUSY_XX */ - /* keep HAL_FMPSMBUS_STATE_LISTEN if set */ - hfmpsmbus->PreviousState = HAL_FMPSMBUS_STATE_READY; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_LISTEN; - } - } - - /* Call the Error callback to inform upper layer */ -#if (USE_HAL_FMPSMBUS_REGISTER_CALLBACKS == 1) - hfmpsmbus->ErrorCallback(hfmpsmbus); -#else - HAL_FMPSMBUS_ErrorCallback(hfmpsmbus); -#endif /* USE_HAL_FMPSMBUS_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Handle FMPSMBUS Communication Timeout. - * @param hfmpsmbus Pointer to a FMPSMBUS_HandleTypeDef structure that contains - * the configuration information for the specified FMPSMBUS. - * @param Flag Specifies the FMPSMBUS flag to check. - * @param Status The new Flag status (SET or RESET). - * @param Timeout Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef FMPSMBUS_WaitOnFlagUntilTimeout(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint32_t Flag, - FlagStatus Status, uint32_t Timeout) -{ - uint32_t tickstart = HAL_GetTick(); - - /* Wait until flag is set */ - while ((FlagStatus)(__HAL_FMPSMBUS_GET_FLAG(hfmpsmbus, Flag)) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) - { - hfmpsmbus->PreviousState = hfmpsmbus->State; - hfmpsmbus->State = HAL_FMPSMBUS_STATE_READY; - - /* Update FMPSMBUS error code */ - hfmpsmbus->ErrorCode |= HAL_FMPSMBUS_ERROR_HALTIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hfmpsmbus); - - return HAL_ERROR; - } - } - } - - return HAL_OK; -} - -/** - * @brief Handle FMPSMBUSx communication when starting transfer or during transfer (TC or TCR flag are set). - * @param hfmpsmbus FMPSMBUS handle. - * @param DevAddress specifies the slave address to be programmed. - * @param Size specifies the number of bytes to be programmed. - * This parameter must be a value between 0 and 255. - * @param Mode New state of the FMPSMBUS START condition generation. - * This parameter can be one or a combination of the following values: - * @arg @ref FMPSMBUS_RELOAD_MODE Enable Reload mode. - * @arg @ref FMPSMBUS_AUTOEND_MODE Enable Automatic end mode. - * @arg @ref FMPSMBUS_SOFTEND_MODE Enable Software end mode and Reload mode. - * @arg @ref FMPSMBUS_SENDPEC_MODE Enable Packet Error Calculation mode. - * @param Request New state of the FMPSMBUS START condition generation. - * This parameter can be one of the following values: - * @arg @ref FMPSMBUS_NO_STARTSTOP Don't Generate stop and start condition. - * @arg @ref FMPSMBUS_GENERATE_STOP Generate stop condition (Size should be set to 0). - * @arg @ref FMPSMBUS_GENERATE_START_READ Generate Restart for read request. - * @arg @ref FMPSMBUS_GENERATE_START_WRITE Generate Restart for write request. - * @retval None - */ -static void FMPSMBUS_TransferConfig(FMPSMBUS_HandleTypeDef *hfmpsmbus, uint16_t DevAddress, uint8_t Size, - uint32_t Mode, uint32_t Request) -{ - /* Check the parameters */ - assert_param(IS_FMPSMBUS_ALL_INSTANCE(hfmpsmbus->Instance)); - assert_param(IS_FMPSMBUS_TRANSFER_MODE(Mode)); - assert_param(IS_FMPSMBUS_TRANSFER_REQUEST(Request)); - - /* update CR2 register */ - MODIFY_REG(hfmpsmbus->Instance->CR2, - ((FMPI2C_CR2_SADD | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_AUTOEND | \ - (FMPI2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - FMPI2C_CR2_RD_WRN_Pos))) | \ - FMPI2C_CR2_START | FMPI2C_CR2_STOP | FMPI2C_CR2_PECBYTE)), \ - (uint32_t)(((uint32_t)DevAddress & FMPI2C_CR2_SADD) | \ - (((uint32_t)Size << FMPI2C_CR2_NBYTES_Pos) & FMPI2C_CR2_NBYTES) | \ - (uint32_t)Mode | (uint32_t)Request)); -} - -/** - * @brief Convert FMPSMBUSx OTHER_xxx XferOptions to functional XferOptions. - * @param hfmpsmbus FMPSMBUS handle. - * @retval None - */ -static void FMPSMBUS_ConvertOtherXferOptions(FMPSMBUS_HandleTypeDef *hfmpsmbus) -{ - /* if user set XferOptions to FMPSMBUS_OTHER_FRAME_NO_PEC */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to FMPSMBUS_FIRST_FRAME */ - if (hfmpsmbus->XferOptions == FMPSMBUS_OTHER_FRAME_NO_PEC) - { - hfmpsmbus->XferOptions = FMPSMBUS_FIRST_FRAME; - } - /* else if user set XferOptions to FMPSMBUS_OTHER_FRAME_WITH_PEC */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to FMPSMBUS_FIRST_FRAME | FMPSMBUS_SENDPEC_MODE */ - else if (hfmpsmbus->XferOptions == FMPSMBUS_OTHER_FRAME_WITH_PEC) - { - hfmpsmbus->XferOptions = FMPSMBUS_FIRST_FRAME | FMPSMBUS_SENDPEC_MODE; - } - /* else if user set XferOptions to FMPSMBUS_OTHER_AND_LAST_FRAME_NO_PEC */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to FMPSMBUS_FIRST_AND_LAST_FRAME_NO_PEC */ - else if (hfmpsmbus->XferOptions == FMPSMBUS_OTHER_AND_LAST_FRAME_NO_PEC) - { - hfmpsmbus->XferOptions = FMPSMBUS_FIRST_AND_LAST_FRAME_NO_PEC; - } - /* else if user set XferOptions to FMPSMBUS_OTHER_AND_LAST_FRAME_WITH_PEC */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to FMPSMBUS_FIRST_AND_LAST_FRAME_WITH_PEC */ - else if (hfmpsmbus->XferOptions == FMPSMBUS_OTHER_AND_LAST_FRAME_WITH_PEC) - { - hfmpsmbus->XferOptions = FMPSMBUS_FIRST_AND_LAST_FRAME_WITH_PEC; - } - else - { - /* Nothing to do */ - } -} -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#endif /* HAL_FMPSMBUS_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus_ex.c deleted file mode 100644 index 14ca0b4..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpsmbus_ex.c +++ /dev/null @@ -1,145 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpsmbus_ex.c - * @author MCD Application Team - * @brief FMPSMBUS Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of FMPSMBUS Extended peripheral: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### FMPSMBUS peripheral Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FMPSMBUS interface for STM32F4xx - devices contains the following additional features - - (+) Disable or enable Fast Mode Plus - - ##### How to use this driver ##### - ============================================================================== - (#) Configure the enable or disable of fast mode plus driving capability using the functions : - (++) HAL_FMPSMBUSEx_EnableFastModePlus() - (++) HAL_FMPSMBUSEx_DisableFastModePlus() - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FMPSMBUSEx FMPSMBUSEx - * @brief FMPSMBUS Extended HAL module driver - * @{ - */ - -#ifdef HAL_FMPSMBUS_MODULE_ENABLED -#if defined(FMPI2C_CR1_PE) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup FMPSMBUSEx_Exported_Functions FMPSMBUS Extended Exported Functions - * @{ - */ - -/** @defgroup FMPSMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions - * @brief Fast Mode Plus Functions - * -@verbatim - =============================================================================== - ##### Fast Mode Plus Functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Fast Mode Plus - -@endverbatim - * @{ - */ - -/** - * @brief Enable the FMPSMBUS fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref FMPSMBUSEx_FastModePlus values - * @note For FMPI2C1, fast mode plus driving capability can be enabled on all selected - * FMPI2C1 pins using FMPSMBUS_FASTMODEPLUS_FMPI2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining FMPI2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be enabled only by using FMPSMBUS_FASTMODEPLUS_FMPI2C1 parameter. - * @retval None - */ -void HAL_FMPSMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_FMPSMBUS_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Enable fast mode plus driving capability for selected pin */ - SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus); -} - -/** - * @brief Disable the FMPSMBUS fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref FMPSMBUSEx_FastModePlus values - * @note For FMPI2C1, fast mode plus driving capability can be disabled on all selected - * FMPI2C1 pins using FMPSMBUS_FASTMODEPLUS_FMPI2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining FMPI2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be disabled only by using FMPSMBUS_FASTMODEPLUS_FMPI2C1 parameter. - * @retval None - */ -void HAL_FMPSMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_FMPSMBUS_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Disable fast mode plus driving capability for selected pin */ - CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#endif /* HAL_FMPSMBUS_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c deleted file mode 100644 index b3ce9bb..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c +++ /dev/null @@ -1,533 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio.c - * @author MCD Application Team - * @brief GPIO HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### GPIO Peripheral features ##### - ============================================================================== - [..] - Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each - port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software - in several modes: - (+) Input mode - (+) Analog mode - (+) Output mode - (+) Alternate function mode - (+) External interrupt/event lines - - [..] - During and just after reset, the alternate functions and external interrupt - lines are not active and the I/O ports are configured in input floating mode. - - [..] - All GPIO pins have weak internal pull-up and pull-down resistors, which can be - activated or not. - - [..] - In Output or Alternate mode, each IO can be configured on open-drain or push-pull - type and the IO speed can be selected depending on the VDD value. - - [..] - All ports have external interrupt/event capability. To use external interrupt - lines, the port must be configured in input mode. All available GPIO pins are - connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. - - [..] - The external interrupt/event controller consists of up to 23 edge detectors - (16 lines are connected to GPIO) for generating event/interrupt requests (each - input line can be independently configured to select the type (interrupt or event) - and the corresponding trigger event (rising or falling or both). Each line can - also be masked independently. - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). - - (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). - (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure - (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef - structure. - (++) In case of Output or alternate function mode selection: the speed is - configured through "Speed" member from GPIO_InitTypeDef structure. - (++) In alternate mode is selection, the alternate function connected to the IO - is configured through "Alternate" member from GPIO_InitTypeDef structure. - (++) Analog mode is required when a pin is to be used as ADC channel - or DAC output. - (++) In case of external interrupt/event selection the "Mode" member from - GPIO_InitTypeDef structure select the type (interrupt or event) and - the corresponding trigger event (rising or falling or both). - - (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority - mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using - HAL_NVIC_EnableIRQ(). - - (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). - - (#) To set/reset the level of a pin configured in output mode use - HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). - - (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). - - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PH0 and PH1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIO GPIO - * @brief GPIO HAL module driver - * @{ - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ - -#define GPIO_NUMBER 16U -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize and de-initialize the GPIOs - to be ready for use. - -@endverbatim - * @{ - */ - - -/** - * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) -{ - uint32_t position; - uint32_t ioposition = 0x00U; - uint32_t iocurrent = 0x00U; - uint32_t temp = 0x00U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); - assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - - /* Configure the port pins */ - for(position = 0U; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = 0x01U << position; - /* Get the current IO position */ - iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*--------------------- GPIO Mode Configuration ------------------------*/ - /* In case of Output or Alternate function mode selection */ - if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \ - (GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - /* Configure the IO Speed */ - temp = GPIOx->OSPEEDR; - temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); - temp |= (GPIO_Init->Speed << (position * 2U)); - GPIOx->OSPEEDR = temp; - - /* Configure the IO Output Type */ - temp = GPIOx->OTYPER; - temp &= ~(GPIO_OTYPER_OT_0 << position) ; - temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); - GPIOx->OTYPER = temp; - } - - if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) - { - /* Check the parameters */ - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); - - /* Activate the Pull-up or Pull down resistor for the current IO */ - temp = GPIOx->PUPDR; - temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - temp |= ((GPIO_Init->Pull) << (position * 2U)); - GPIOx->PUPDR = temp; - } - - /* In case of Alternate function mode selection */ - if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Alternate function parameter */ - assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); - /* Configure Alternate function mapped with the current IO */ - temp = GPIOx->AFR[position >> 3U]; - temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; - temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U)); - GPIOx->AFR[position >> 3U] = temp; - } - - /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ - temp = GPIOx->MODER; - temp &= ~(GPIO_MODER_MODER0 << (position * 2U)); - temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U)); - GPIOx->MODER = temp; - - /*--------------------- EXTI Mode Configuration ------------------------*/ - /* Configure the External Interrupt or event for the current IO */ - if((GPIO_Init->Mode & EXTI_MODE) != 0x00U) - { - /* Enable SYSCFG Clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - temp = SYSCFG->EXTICR[position >> 2U]; - temp &= ~(0x0FU << (4U * (position & 0x03U))); - temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))); - SYSCFG->EXTICR[position >> 2U] = temp; - - /* Clear Rising Falling edge configuration */ - temp = EXTI->RTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) - { - temp |= iocurrent; - } - EXTI->RTSR = temp; - - temp = EXTI->FTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) - { - temp |= iocurrent; - } - EXTI->FTSR = temp; - - temp = EXTI->EMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & EXTI_EVT) != 0x00U) - { - temp |= iocurrent; - } - EXTI->EMR = temp; - - /* Clear EXTI line configuration */ - temp = EXTI->IMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & EXTI_IT) != 0x00U) - { - temp |= iocurrent; - } - EXTI->IMR = temp; - } - } - } -} - -/** - * @brief De-initializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) -{ - uint32_t position; - uint32_t ioposition = 0x00U; - uint32_t iocurrent = 0x00U; - uint32_t tmp = 0x00U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Configure the port pins */ - for(position = 0U; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = 0x01U << position; - /* Get the current IO position */ - iocurrent = (GPIO_Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*------------------------- EXTI Mode Configuration --------------------*/ - tmp = SYSCFG->EXTICR[position >> 2U]; - tmp &= (0x0FU << (4U * (position & 0x03U))); - if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)))) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~((uint32_t)iocurrent); - EXTI->EMR &= ~((uint32_t)iocurrent); - - /* Clear Rising Falling edge configuration */ - EXTI->FTSR &= ~((uint32_t)iocurrent); - EXTI->RTSR &= ~((uint32_t)iocurrent); - - /* Configure the External Interrupt or event for the current IO */ - tmp = 0x0FU << (4U * (position & 0x03U)); - SYSCFG->EXTICR[position >> 2U] &= ~tmp; - } - - /*------------------------- GPIO Mode Configuration --------------------*/ - /* Configure IO Direction in Input Floating Mode */ - GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U)); - - /* Configure the default Alternate Function in current IO */ - GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; - - /* Deactivate the Pull-up and Pull-down resistor for the current IO */ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - - /* Configure the default value IO Output Type */ - GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; - - /* Configure the default value for IO Speed */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); - } - } -} - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions - * @brief GPIO Read and Write - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Reads the specified input port pin. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to read. - * This parameter can be GPIO_PIN_x where x can be (0..15). - * @retval The input port pin value. - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - GPIO_PinState bitstatus; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) - { - bitstatus = GPIO_PIN_SET; - } - else - { - bitstatus = GPIO_PIN_RESET; - } - return bitstatus; -} - -/** - * @brief Sets or clears the selected data port bit. - * - * @note This function uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @param PinState specifies the value to be written to the selected bit. - * This parameter can be one of the GPIO_PinState enum values: - * @arg GPIO_PIN_RESET: to clear the port pin - * @arg GPIO_PIN_SET: to set the port pin - * @retval None - */ -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_PIN_ACTION(PinState)); - - if(PinState != GPIO_PIN_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U; - } -} - -/** - * @brief Toggles the specified GPIO pins. - * @param GPIOx Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin Specifies the pins to be toggled. - * @retval None - */ -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint32_t odr; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* get current Output Data Register value */ - odr = GPIOx->ODR; - - /* Set selected pins that were at low level, and reset ones that were high */ - GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, - * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. - * @note The configuration of the locked GPIO pins can no longer be modified - * until the next reset. - * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F4 family - * @param GPIO_Pin specifies the port bit to be locked. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = GPIO_LCKR_LCKK; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Apply lock key write sequence */ - tmp |= GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Read LCKR register. This read is mandatory to complete key lock sequence */ - tmp = GPIOx->LCKR; - - /* Read again in order to confirm lock is active */ - if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET) - { - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief This function handles EXTI interrupt request. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) -{ - /* EXTI line interrupt detected */ - if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) - { - __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); - HAL_GPIO_EXTI_Callback(GPIO_Pin); - } -} - -/** - * @brief EXTI line detection callbacks. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(GPIO_Pin); - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_GPIO_EXTI_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c deleted file mode 100644 index f3aafe0..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c +++ /dev/null @@ -1,3514 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hash.c - * @author MCD Application Team - * @brief HASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the HASH peripheral: - * + Initialization and de-initialization methods - * + HASH or HMAC processing in polling mode - * + HASH or HMAC processing in interrupt mode - * + HASH or HMAC processing in DMA mode - * + Peripheral State methods - * + HASH or HMAC processing suspension/resumption - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The HASH HAL driver can be used as follows: - - (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit(): - (##) Enable the HASH interface clock using __HASH_CLK_ENABLE() - (##) When resorting to interrupt-based APIs (e.g. HAL_HASH_xxx_Start_IT()) - (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority() - (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ() - (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler() API - (##) When resorting to DMA-based APIs (e.g. HAL_HASH_xxx_Start_DMA()) - (+++) Enable the DMAx interface clock using - __DMAx_CLK_ENABLE() - (+++) Configure and enable one DMA stream to manage data transfer from - memory to peripheral (input stream). Managing data transfer from - peripheral to memory can be performed only using CPU. - (+++) Associate the initialized DMA handle to the HASH DMA handle - using __HAL_LINKDMA() - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the DMA stream: use - HAL_NVIC_SetPriority() and - HAL_NVIC_EnableIRQ() - - (#)Initialize the HASH HAL using HAL_HASH_Init(). This function: - (##) resorts to HAL_HASH_MspInit() for low-level initialization, - (##) configures the data type: 1-bit, 8-bit, 16-bit or 32-bit. - - (#)Three processing schemes are available: - (##) Polling mode: processing APIs are blocking functions - i.e. they process the data and wait till the digest computation is finished, - e.g. HAL_HASH_xxx_Start() for HASH or HAL_HMAC_xxx_Start() for HMAC - (##) Interrupt mode: processing APIs are not blocking functions - i.e. they process the data under interrupt, - e.g. HAL_HASH_xxx_Start_IT() for HASH or HAL_HMAC_xxx_Start_IT() for HMAC - (##) DMA mode: processing APIs are not blocking functions and the CPU is - not used for data transfer i.e. the data transfer is ensured by DMA, - e.g. HAL_HASH_xxx_Start_DMA() for HASH or HAL_HMAC_xxx_Start_DMA() - for HMAC. Note that in DMA mode, a call to HAL_HASH_xxx_Finish() - is then required to retrieve the digest. - - (#)When the processing function is called after HAL_HASH_Init(), the HASH peripheral is - initialized and processes the buffer fed in input. When the input data have all been - fed to the Peripheral, the digest computation can start. - - (#)Multi-buffer processing is possible in polling, interrupt and DMA modes. - (##) In polling mode, only multi-buffer HASH processing is possible. - API HAL_HASH_xxx_Accumulate() must be called for each input buffer, except for the last one. - User must resort to HAL_HASH_xxx_Accumulate_End() to enter the last one and retrieve as - well the computed digest. - - (##) In interrupt mode, API HAL_HASH_xxx_Accumulate_IT() must be called for each input buffer, - except for the last one. - User must resort to HAL_HASH_xxx_Accumulate_End_IT() to enter the last one and retrieve as - well the computed digest. - - (##) In DMA mode, multi-buffer HASH and HMAC processing are possible. - (+++) HASH processing: once initialization is done, MDMAT bit must be set - through __HAL_HASH_SET_MDMAT() macro. - From that point, each buffer can be fed to the Peripheral through HAL_HASH_xxx_Start_DMA() API. - Before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT() - macro then wrap-up the HASH processing in feeding the last input buffer through the - same API HAL_HASH_xxx_Start_DMA(). The digest can then be retrieved with a call to - API HAL_HASH_xxx_Finish(). - (+++) HMAC processing (requires to resort to extended functions): - after initialization, the key and the first input buffer are entered - in the Peripheral with the API HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and - starts step 2. - The following buffers are next entered with the API HAL_HMACEx_xxx_Step2_DMA(). At this - point, the HMAC processing is still carrying out step 2. - Then, step 2 for the last input buffer and step 3 are carried out by a single call - to HAL_HMACEx_xxx_Step2_3_DMA(). - - The digest can finally be retrieved with a call to API HAL_HASH_xxx_Finish(). - - - (#)Context swapping. - (##) Two APIs are available to suspend HASH or HMAC processing: - (+++) HAL_HASH_SwFeed_ProcessSuspend() when data are entered by software (polling or IT mode), - (+++) HAL_HASH_DMAFeed_ProcessSuspend() when data are entered by DMA. - - (##) When HASH or HMAC processing is suspended, HAL_HASH_ContextSaving() allows - to save in memory the Peripheral context. This context can be restored afterwards - to resume the HASH processing thanks to HAL_HASH_ContextRestoring(). - - (##) Once the HASH Peripheral has been restored to the same configuration as that at suspension - time, processing can be restarted with the same API call (same API, same handle, - same parameters) as done before the suspension. Relevant parameters to restart at - the proper location are internally saved in the HASH handle. - - (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral. - - *** Remarks on message length *** - =================================== - [..] - (#) HAL in interruption mode (interruptions driven) - - (##)Due to HASH peripheral hardware design, the peripheral interruption is triggered every 64 bytes. - This is why, for driver implementation simplicity’s sake, user is requested to enter a message the - length of which is a multiple of 4 bytes. - - (##) When the message length (in bytes) is not a multiple of words, a specific field exists in HASH_STR - to specify which bits to discard at the end of the complete message to process only the message bits - and not extra bits. - - (##) If user needs to perform a hash computation of a large input buffer that is spread around various places - in memory and where each piece of this input buffer is not necessarily a multiple of 4 bytes in size, it becomes - necessary to use a temporary buffer to format the data accordingly before feeding them to the Peripheral. - It is advised to the user to - (+++) achieve the first formatting operation by software then enter the data - (+++) while the Peripheral is processing the first input set, carry out the second formatting - operation by software, to be ready when DINIS occurs. - (+++) repeat step 2 until the whole message is processed. - - [..] - (#) HAL in DMA mode - - (##) Again, due to hardware design, the DMA transfer to feed the data can only be done on a word-basis. - The same field described above in HASH_STR is used to specify which bits to discard at the end of the - DMA transfer to process only the message bits and not extra bits. Due to hardware implementation, - this is possible only at the end of the complete message. When several DMA transfers are needed to - enter the message, this is not applicable at the end of the intermediary transfers. - - (##) Similarly to the interruption-driven mode, it is suggested to the user to format the consecutive - chunks of data by software while the DMA transfer and processing is on-going for the first parts of - the message. Due to the 32-bit alignment required for the DMA transfer, it is underlined that the - software formatting operation is more complex than in the IT mode. - - *** Callback registration *** - =================================== - [..] - (#) The compilation define USE_HAL_HASH_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use function HAL_HASH_RegisterCallback() to register a user callback. - - (#) Function HAL_HASH_RegisterCallback() allows to register following callbacks: - (+) InCpltCallback : callback for input completion. - (+) DgstCpltCallback : callback for digest computation completion. - (+) ErrorCallback : callback for error. - (+) MspInitCallback : HASH MspInit. - (+) MspDeInitCallback : HASH MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - (#) Use function HAL_HASH_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - HAL_HASH_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) InCpltCallback : callback for input completion. - (+) DgstCpltCallback : callback for digest computation completion. - (+) ErrorCallback : callback for error. - (+) MspInitCallback : HASH MspInit. - (+) MspDeInitCallback : HASH MspDeInit. - - (#) By default, after the HAL_HASH_Init and if the state is HAL_HASH_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions: - examples HAL_HASH_InCpltCallback(), HAL_HASH_DgstCpltCallback() - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_HASH_Init - and HAL_HASH_DeInit only when these callbacks are null (not registered beforehand) - If not, MspInit or MspDeInit are not null, the HAL_HASH_Init and HAL_HASH_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_HASH_RegisterCallback before calling HAL_HASH_DeInit - or HAL_HASH_Init function. - - When The compilation define USE_HAL_HASH_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (HASH) - -/** @defgroup HASH HASH - * @brief HASH HAL module driver. - * @{ - */ - -#ifdef HAL_HASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup HASH_Private_Constants HASH Private Constants - * @{ - */ - -/** @defgroup HASH_Digest_Calculation_Status HASH Digest Calculation Status - * @{ - */ -#define HASH_DIGEST_CALCULATION_NOT_STARTED ((uint32_t)0x00000000U) /*!< DCAL not set after input data written in DIN register */ -#define HASH_DIGEST_CALCULATION_STARTED ((uint32_t)0x00000001U) /*!< DCAL set after input data written in DIN register */ -/** - * @} - */ - -/** @defgroup HASH_Number_Of_CSR_Registers HASH Number of Context Swap Registers - * @{ - */ -#define HASH_NUMBER_OF_CSR_REGISTERS 54U /*!< Number of Context Swap Registers */ -/** - * @} - */ - -/** @defgroup HASH_TimeOut_Value HASH TimeOut Value - * @{ - */ -#define HASH_TIMEOUTVALUE 1000U /*!< Time-out value */ -/** - * @} - */ - -/** @defgroup HASH_DMA_Suspension_Words_Limit HASH DMA suspension words limit - * @{ - */ -#define HASH_DMA_SUSPENSION_WORDS_LIMIT 20U /*!< Number of words below which DMA suspension is aborted */ -/** - * @} - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup HASH_Private_Functions HASH Private Functions - * @{ - */ -static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma); -static void HASH_DMAError(DMA_HandleTypeDef *hdma); -static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size); -static HAL_StatusTypeDef HASH_WaitOnFlagUntilTimeout(HASH_HandleTypeDef *hhash, uint32_t Flag, FlagStatus Status, - uint32_t Timeout); -static HAL_StatusTypeDef HASH_WriteData(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -static HAL_StatusTypeDef HASH_IT(HASH_HandleTypeDef *hhash); -static uint32_t HASH_Write_Block_Data(HASH_HandleTypeDef *hhash); -static HAL_StatusTypeDef HMAC_Processing(HASH_HandleTypeDef *hhash, uint32_t Timeout); -/** - * @} - */ - -/** @defgroup HASH_Exported_Functions HASH Exported Functions - * @{ - */ - -/** @defgroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization, configuration and call-back functions. - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the HASH according to the specified parameters - in the HASH_InitTypeDef and create the associated handle - (+) DeInitialize the HASH peripheral - (+) Initialize the HASH MCU Specific Package (MSP) - (+) DeInitialize the HASH MSP - - [..] This section provides as well call back functions definitions for user - code to manage: - (+) Input data transfer to Peripheral completion - (+) Calculated digest retrieval completion - (+) Error management - - - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the HASH according to the specified parameters in the - HASH_HandleTypeDef and create the associated handle. - * @note Only MDMAT and DATATYPE bits of HASH Peripheral are set by HAL_HASH_Init(), - * other configuration bits are set by HASH or HMAC processing APIs. - * @note MDMAT bit is systematically reset by HAL_HASH_Init(). To set it for - * multi-buffer HASH processing, user needs to resort to - * __HAL_HASH_SET_MDMAT() macro. For HMAC multi-buffer processing, the - * relevant APIs manage themselves the MDMAT bit. - * @param hhash HASH handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash) -{ - /* Check the hash handle allocation */ - if (hhash == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_HASH_DATATYPE(hhash->Init.DataType)); - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - if (hhash->State == HAL_HASH_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hhash->Lock = HAL_UNLOCKED; - - /* Reset Callback pointers in HAL_HASH_STATE_RESET only */ - hhash->InCpltCallback = HAL_HASH_InCpltCallback; /* Legacy weak (surcharged) input completion callback */ - hhash->DgstCpltCallback = HAL_HASH_DgstCpltCallback; /* Legacy weak (surcharged) digest computation - completion callback */ - hhash->ErrorCallback = HAL_HASH_ErrorCallback; /* Legacy weak (surcharged) error callback */ - if (hhash->MspInitCallback == NULL) - { - hhash->MspInitCallback = HAL_HASH_MspInit; - } - - /* Init the low level hardware */ - hhash->MspInitCallback(hhash); - } -#else - if (hhash->State == HAL_HASH_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hhash->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_HASH_MspInit(hhash); - } -#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Reset HashInCount, HashITCounter, HashBuffSize and NbWordsAlreadyPushed */ - hhash->HashInCount = 0; - hhash->HashBuffSize = 0; - hhash->HashITCounter = 0; - hhash->NbWordsAlreadyPushed = 0; - /* Reset digest calculation bridle (MDMAT bit control) */ - hhash->DigestCalculationDisable = RESET; - /* Set phase to READY */ - hhash->Phase = HAL_HASH_PHASE_READY; - /* Reset suspension request flag */ - hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE; - - /* Set the data type bit */ - MODIFY_REG(HASH->CR, HASH_CR_DATATYPE, hhash->Init.DataType); -#if defined(HASH_CR_MDMAT) - /* Reset MDMAT bit */ - __HAL_HASH_RESET_MDMAT(); -#endif /* HASH_CR_MDMAT */ - /* Reset HASH handle status */ - hhash->Status = HAL_OK; - - /* Set the HASH state to Ready */ - hhash->State = HAL_HASH_STATE_READY; - - /* Initialise the error code */ - hhash->ErrorCode = HAL_HASH_ERROR_NONE; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief DeInitialize the HASH peripheral. - * @param hhash HASH handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash) -{ - /* Check the HASH handle allocation */ - if (hhash == NULL) - { - return HAL_ERROR; - } - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Set the default HASH phase */ - hhash->Phase = HAL_HASH_PHASE_READY; - - /* Reset HashInCount, HashITCounter and HashBuffSize */ - hhash->HashInCount = 0; - hhash->HashBuffSize = 0; - hhash->HashITCounter = 0; - /* Reset digest calculation bridle (MDMAT bit control) */ - hhash->DigestCalculationDisable = RESET; - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - if (hhash->MspDeInitCallback == NULL) - { - hhash->MspDeInitCallback = HAL_HASH_MspDeInit; - } - - /* DeInit the low level hardware */ - hhash->MspDeInitCallback(hhash); -#else - /* DeInit the low level hardware: CLOCK, NVIC */ - HAL_HASH_MspDeInit(hhash); -#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ - - - /* Reset HASH handle status */ - hhash->Status = HAL_OK; - - /* Set the HASH state to Ready */ - hhash->State = HAL_HASH_STATE_RESET; - - /* Initialise the error code */ - hhash->ErrorCode = HAL_HASH_ERROR_NONE; - - /* Reset multi buffers accumulation flag */ - hhash->Accumulation = 0U; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the HASH MSP. - * @param hhash HASH handle. - * @retval None - */ -__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* NOTE : This function should not be modified; when the callback is needed, - HAL_HASH_MspInit() can be implemented in the user file. - */ -} - -/** - * @brief DeInitialize the HASH MSP. - * @param hhash HASH handle. - * @retval None - */ -__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* NOTE : This function should not be modified; when the callback is needed, - HAL_HASH_MspDeInit() can be implemented in the user file. - */ -} - -/** - * @brief Input data transfer complete call back. - * @note HAL_HASH_InCpltCallback() is called when the complete input message - * has been fed to the Peripheral. This API is invoked only when input data are - * entered under interruption or through DMA. - * @note In case of HASH or HMAC multi-buffer DMA feeding case (MDMAT bit set), - * HAL_HASH_InCpltCallback() is called at the end of each buffer feeding - * to the Peripheral. - * @param hhash HASH handle. - * @retval None - */ -__weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* NOTE : This function should not be modified; when the callback is needed, - HAL_HASH_InCpltCallback() can be implemented in the user file. - */ -} - -/** - * @brief Digest computation complete call back. - * @note HAL_HASH_DgstCpltCallback() is used under interruption, is not - * relevant with DMA. - * @param hhash HASH handle. - * @retval None - */ -__weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* NOTE : This function should not be modified; when the callback is needed, - HAL_HASH_DgstCpltCallback() can be implemented in the user file. - */ -} - -/** - * @brief Error callback. - * @note Code user can resort to hhash->Status (HAL_ERROR, HAL_TIMEOUT,...) - * to retrieve the error type. - * @param hhash HASH handle. - * @retval None - */ -__weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* NOTE : This function should not be modified; when the callback is needed, - HAL_HASH_ErrorCallback() can be implemented in the user file. - */ -} - -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User HASH Callback - * To be used instead of the weak (surcharged) predefined callback - * @param hhash HASH handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_HASH_INPUTCPLT_CB_ID HASH input completion Callback ID - * @arg @ref HAL_HASH_DGSTCPLT_CB_ID HASH digest computation completion Callback ID - * @arg @ref HAL_HASH_ERROR_CB_ID HASH error Callback ID - * @arg @ref HAL_HASH_MSPINIT_CB_ID HASH MspInit callback ID - * @arg @ref HAL_HASH_MSPDEINIT_CB_ID HASH MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID, - pHASH_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hhash); - - if (HAL_HASH_STATE_READY == hhash->State) - { - switch (CallbackID) - { - case HAL_HASH_INPUTCPLT_CB_ID : - hhash->InCpltCallback = pCallback; - break; - - case HAL_HASH_DGSTCPLT_CB_ID : - hhash->DgstCpltCallback = pCallback; - break; - - case HAL_HASH_ERROR_CB_ID : - hhash->ErrorCallback = pCallback; - break; - - case HAL_HASH_MSPINIT_CB_ID : - hhash->MspInitCallback = pCallback; - break; - - case HAL_HASH_MSPDEINIT_CB_ID : - hhash->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_HASH_STATE_RESET == hhash->State) - { - switch (CallbackID) - { - case HAL_HASH_MSPINIT_CB_ID : - hhash->MspInitCallback = pCallback; - break; - - case HAL_HASH_MSPDEINIT_CB_ID : - hhash->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hhash); - return status; -} - -/** - * @brief Unregister a HASH Callback - * HASH Callback is redirected to the weak (surcharged) predefined callback - * @param hhash HASH handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_HASH_INPUTCPLT_CB_ID HASH input completion Callback ID - * @arg @ref HAL_HASH_DGSTCPLT_CB_ID HASH digest computation completion Callback ID - * @arg @ref HAL_HASH_ERROR_CB_ID HASH error Callback ID - * @arg @ref HAL_HASH_MSPINIT_CB_ID HASH MspInit callback ID - * @arg @ref HAL_HASH_MSPDEINIT_CB_ID HASH MspDeInit callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hhash); - - if (HAL_HASH_STATE_READY == hhash->State) - { - switch (CallbackID) - { - case HAL_HASH_INPUTCPLT_CB_ID : - hhash->InCpltCallback = HAL_HASH_InCpltCallback; /* Legacy weak (surcharged) input completion callback */ - break; - - case HAL_HASH_DGSTCPLT_CB_ID : - hhash->DgstCpltCallback = HAL_HASH_DgstCpltCallback; /* Legacy weak (surcharged) digest computation - completion callback */ - break; - - case HAL_HASH_ERROR_CB_ID : - hhash->ErrorCallback = HAL_HASH_ErrorCallback; /* Legacy weak (surcharged) error callback */ - break; - - case HAL_HASH_MSPINIT_CB_ID : - hhash->MspInitCallback = HAL_HASH_MspInit; /* Legacy weak (surcharged) Msp Init */ - break; - - case HAL_HASH_MSPDEINIT_CB_ID : - hhash->MspDeInitCallback = HAL_HASH_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ - break; - - default : - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_HASH_STATE_RESET == hhash->State) - { - switch (CallbackID) - { - case HAL_HASH_MSPINIT_CB_ID : - hhash->MspInitCallback = HAL_HASH_MspInit; /* Legacy weak (surcharged) Msp Init */ - break; - - case HAL_HASH_MSPDEINIT_CB_ID : - hhash->MspDeInitCallback = HAL_HASH_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ - break; - - default : - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hhash); - return status; -} -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions in polling mode - * @brief HASH processing functions using polling mode. - * -@verbatim - =============================================================================== - ##### Polling mode HASH processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in polling mode - the hash value using one of the following algorithms: - (+) MD5 - (++) HAL_HASH_MD5_Start() - (++) HAL_HASH_MD5_Accmlt() - (++) HAL_HASH_MD5_Accmlt_End() - (+) SHA1 - (++) HAL_HASH_SHA1_Start() - (++) HAL_HASH_SHA1_Accmlt() - (++) HAL_HASH_SHA1_Accmlt_End() - - [..] For a single buffer to be hashed, user can resort to HAL_HASH_xxx_Start(). - - [..] In case of multi-buffer HASH processing (a single digest is computed while - several buffers are fed to the Peripheral), the user can resort to successive calls - to HAL_HASH_xxx_Accumulate() and wrap-up the digest computation by a call - to HAL_HASH_xxx_Accumulate_End(). - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the HASH peripheral in MD5 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief If not already done, initialize the HASH peripheral in MD5 mode then - * processes pInBuffer. - * @note Consecutive calls to HAL_HASH_MD5_Accmlt() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASH_MD5_Accmlt_End(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note Digest is not retrieved by this API, user must resort to HAL_HASH_MD5_Accmlt_End() - * to read it, feeding at the same time the last input buffer to the Peripheral. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASH_MD5_Accmlt_End() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASH_MD5_Accmlt() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief Initialize the HASH peripheral in SHA1 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief If not already done, initialize the HASH peripheral in SHA1 mode then - * processes pInBuffer. - * @note Consecutive calls to HAL_HASH_SHA1_Accmlt() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASH_SHA1_Accmlt_End(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note Digest is not retrieved by this API, user must resort to HAL_HASH_SHA1_Accmlt_End() - * to read it, feeding at the same time the last input buffer to the Peripheral. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASH_SHA1_Accmlt_End() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASH_SHA1_Accmlt() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA1); -} - -/** - * @} - */ - -/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions in interrupt mode - * @brief HASH processing functions using interrupt mode. - * -@verbatim - =============================================================================== - ##### Interruption mode HASH processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in interrupt mode - the hash value using one of the following algorithms: - (+) MD5 - (++) HAL_HASH_MD5_Start_IT() - (++) HAL_HASH_MD5_Accmlt_IT() - (++) HAL_HASH_MD5_Accmlt_End_IT() - (+) SHA1 - (++) HAL_HASH_SHA1_Start_IT() - (++) HAL_HASH_SHA1_Accmlt_IT() - (++) HAL_HASH_SHA1_Accmlt_End_IT() - - [..] API HAL_HASH_IRQHandler() manages each HASH interruption. - - [..] Note that HAL_HASH_IRQHandler() manages as well HASH Peripheral interruptions when in - HMAC processing mode. - - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the HASH peripheral in MD5 mode, next process pInBuffer then - * read the computed digest in interruption mode. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief If not already done, initialize the HASH peripheral in MD5 mode then - * processes pInBuffer in interruption mode. - * @note Consecutive calls to HAL_HASH_MD5_Accmlt_IT() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASH_MD5_Accmlt_End_IT(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASH_MD5_Accmlt_End_IT() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate_IT(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASH_MD5_Accmlt_IT() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief Initialize the HASH peripheral in SHA1 mode, next process pInBuffer then - * read the computed digest in interruption mode. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA1); -} - - -/** - * @brief If not already done, initialize the HASH peripheral in SHA1 mode then - * processes pInBuffer in interruption mode. - * @note Consecutive calls to HAL_HASH_SHA1_Accmlt_IT() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASH_SHA1_Accmlt_End_IT(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASH_SHA1_Accmlt_End_IT() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate_IT(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASH_SHA1_Accmlt_IT() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief Handle HASH interrupt request. - * @param hhash HASH handle. - * @note HAL_HASH_IRQHandler() handles interrupts in HMAC processing as well. - * @note In case of error reported during the HASH interruption processing, - * HAL_HASH_ErrorCallback() API is called so that user code can - * manage the error. The error type is available in hhash->Status field. - * @retval None - */ -void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash) -{ - hhash->Status = HASH_IT(hhash); - if (hhash->Status != HAL_OK) - { - hhash->ErrorCode |= HAL_HASH_ERROR_IT; -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->ErrorCallback(hhash); -#else - HAL_HASH_ErrorCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - /* After error handling by code user, reset HASH handle HAL status */ - hhash->Status = HAL_OK; - } -} - -/** - * @} - */ - -/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions in DMA mode - * @brief HASH processing functions using DMA mode. - * -@verbatim - =============================================================================== - ##### DMA mode HASH processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in DMA mode - the hash value using one of the following algorithms: - (+) MD5 - (++) HAL_HASH_MD5_Start_DMA() - (++) HAL_HASH_MD5_Finish() - (+) SHA1 - (++) HAL_HASH_SHA1_Start_DMA() - (++) HAL_HASH_SHA1_Finish() - - [..] When resorting to DMA mode to enter the data in the Peripheral, user must resort - to HAL_HASH_xxx_Start_DMA() then read the resulting digest with - HAL_HASH_xxx_Finish(). - [..] In case of multi-buffer HASH processing, MDMAT bit must first be set before - the successive calls to HAL_HASH_xxx_Start_DMA(). Then, MDMAT bit needs to be - reset before the last call to HAL_HASH_xxx_Start_DMA(). Digest is finally - retrieved thanks to HAL_HASH_xxx_Finish(). - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the HASH peripheral in MD5 mode then initiate a DMA transfer - * to feed the input buffer to the Peripheral. - * @note Once the DMA transfer is finished, HAL_HASH_MD5_Finish() API must - * be called to retrieve the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief Return the computed digest in MD5 mode. - * @note The API waits for DCIS to be set then reads the computed digest. - * @note HAL_HASH_MD5_Finish() can be used as well to retrieve the digest in - * HMAC MD5 mode. - * @param hhash HASH handle. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Finish(hhash, pOutBuffer, Timeout); -} - -/** - * @brief Initialize the HASH peripheral in SHA1 mode then initiate a DMA transfer - * to feed the input buffer to the Peripheral. - * @note Once the DMA transfer is finished, HAL_HASH_SHA1_Finish() API must - * be called to retrieve the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - - -/** - * @brief Return the computed digest in SHA1 mode. - * @note The API waits for DCIS to be set then reads the computed digest. - * @note HAL_HASH_SHA1_Finish() can be used as well to retrieve the digest in - * HMAC SHA1 mode. - * @param hhash HASH handle. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Finish(hhash, pOutBuffer, Timeout); -} - -/** - * @} - */ - -/** @defgroup HASH_Exported_Functions_Group5 HMAC processing functions in polling mode - * @brief HMAC processing functions using polling mode. - * -@verbatim - =============================================================================== - ##### Polling mode HMAC processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in polling mode - the HMAC value using one of the following algorithms: - (+) MD5 - (++) HAL_HMAC_MD5_Start() - (+) SHA1 - (++) HAL_HMAC_SHA1_Start() - - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the HASH peripheral in HMAC MD5 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout) -{ - return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief Initialize the HASH peripheral in HMAC SHA1 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout) -{ - return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA1); -} - -/** - * @} - */ - - -/** @defgroup HASH_Exported_Functions_Group6 HMAC processing functions in interrupt mode - * @brief HMAC processing functions using interrupt mode. - * -@verbatim - =============================================================================== - ##### Interrupt mode HMAC processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in interrupt mode - the HMAC value using one of the following algorithms: - (+) MD5 - (++) HAL_HMAC_MD5_Start_IT() - (+) SHA1 - (++) HAL_HMAC_SHA1_Start_IT() - -@endverbatim - * @{ - */ - - -/** - * @brief Initialize the HASH peripheral in HMAC MD5 mode, next process pInBuffer then - * read the computed digest in interrupt mode. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 16 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMAC_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief Initialize the HASH peripheral in HMAC SHA1 mode, next process pInBuffer then - * read the computed digest in interrupt mode. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 20 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA1); -} - -/** - * @} - */ - - - -/** @defgroup HASH_Exported_Functions_Group7 HMAC processing functions in DMA mode - * @brief HMAC processing functions using DMA modes. - * -@verbatim - =============================================================================== - ##### DMA mode HMAC processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in DMA mode - the HMAC value using one of the following algorithms: - (+) MD5 - (++) HAL_HMAC_MD5_Start_DMA() - (+) SHA1 - (++) HAL_HMAC_SHA1_Start_DMA() - - [..] When resorting to DMA mode to enter the data in the Peripheral for HMAC processing, - user must resort to HAL_HMAC_xxx_Start_DMA() then read the resulting digest - with HAL_HASH_xxx_Finish(). - -@endverbatim - * @{ - */ - - -/** - * @brief Initialize the HASH peripheral in HMAC MD5 mode then initiate the required - * DMA transfers to feed the key and the input buffer to the Peripheral. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASH_MD5_Finish() API must be called to retrieve - * the computed digest. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note If MDMAT bit is set before calling this function (multi-buffer - * HASH processing case), the input buffer size (in bytes) must be - * a multiple of 4 otherwise, the HASH digest computation is corrupted. - * For the processing of the last buffer of the thread, MDMAT bit must - * be reset and the buffer length (in bytes) doesn't have to be a - * multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - - -/** - * @brief Initialize the HASH peripheral in HMAC SHA1 mode then initiate the required - * DMA transfers to feed the key and the input buffer to the Peripheral. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASH_SHA1_Finish() API must be called to retrieve - * the computed digest. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note If MDMAT bit is set before calling this function (multi-buffer - * HASH processing case), the input buffer size (in bytes) must be - * a multiple of 4 otherwise, the HASH digest computation is corrupted. - * For the processing of the last buffer of the thread, MDMAT bit must - * be reset and the buffer length (in bytes) doesn't have to be a - * multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - -/** - * @} - */ - -/** @defgroup HASH_Exported_Functions_Group8 Peripheral states functions - * @brief Peripheral State functions. - * -@verbatim - =============================================================================== - ##### Peripheral State methods ##### - =============================================================================== - [..] - This section permits to get in run-time the state and the peripheral handle - status of the peripheral: - (+) HAL_HASH_GetState() - (+) HAL_HASH_GetStatus() - - [..] - Additionally, this subsection provides functions allowing to save and restore - the HASH or HMAC processing context in case of calculation suspension: - (+) HAL_HASH_ContextSaving() - (+) HAL_HASH_ContextRestoring() - - [..] - This subsection provides functions allowing to suspend the HASH processing - (+) when input are fed to the Peripheral by software - (++) HAL_HASH_SwFeed_ProcessSuspend() - (+) when input are fed to the Peripheral by DMA - (++) HAL_HASH_DMAFeed_ProcessSuspend() - - - -@endverbatim - * @{ - */ - -/** - * @brief Return the HASH handle state. - * @note The API yields the current state of the handle (BUSY, READY,...). - * @param hhash HASH handle. - * @retval HAL HASH state - */ -HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash) -{ - return hhash->State; -} - - -/** - * @brief Return the HASH HAL status. - * @note The API yields the HAL status of the handle: it is the result of the - * latest HASH processing and allows to report any issue (e.g. HAL_TIMEOUT). - * @param hhash HASH handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_GetStatus(HASH_HandleTypeDef *hhash) -{ - return hhash->Status; -} - -/** - * @brief Save the HASH context in case of processing suspension. - * @param hhash HASH handle. - * @param pMemBuffer pointer to the memory buffer where the HASH context - * is saved. - * @note The IMR, STR, CR then all the CSR registers are saved - * in that order. Only the r/w bits are read to be restored later on. - * @note By default, all the context swap registers (there are - * HASH_NUMBER_OF_CSR_REGISTERS of those) are saved. - * @note pMemBuffer points to a buffer allocated by the user. The buffer size - * must be at least (HASH_NUMBER_OF_CSR_REGISTERS + 3) * 4 uint8 long. - * @retval None - */ -void HAL_HASH_ContextSaving(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer) -{ - uint32_t mem_ptr = (uint32_t)pMemBuffer; - uint32_t csr_ptr = (uint32_t)HASH->CSR; - uint32_t i; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* Save IMR register content */ - *(uint32_t *)(mem_ptr) = READ_BIT(HASH->IMR, HASH_IT_DINI | HASH_IT_DCI); - mem_ptr += 4U; - /* Save STR register content */ - *(uint32_t *)(mem_ptr) = READ_BIT(HASH->STR, HASH_STR_NBLW); - mem_ptr += 4U; - /* Save CR register content */ -#if defined(HASH_CR_MDMAT) - *(uint32_t *)(mem_ptr) = READ_BIT(HASH->CR, HASH_CR_DMAE | HASH_CR_DATATYPE | HASH_CR_MODE | HASH_CR_ALGO | - HASH_CR_LKEY | HASH_CR_MDMAT); -#else - *(uint32_t *)(mem_ptr) = READ_BIT(HASH->CR, HASH_CR_DMAE | HASH_CR_DATATYPE | HASH_CR_MODE | HASH_CR_ALGO | - HASH_CR_LKEY); -#endif /* HASH_CR_MDMAT*/ - mem_ptr += 4U; - /* By default, save all CSRs registers */ - for (i = HASH_NUMBER_OF_CSR_REGISTERS; i > 0U; i--) - { - *(uint32_t *)(mem_ptr) = *(uint32_t *)(csr_ptr); - mem_ptr += 4U; - csr_ptr += 4U; - } -} - - -/** - * @brief Restore the HASH context in case of processing resumption. - * @param hhash HASH handle. - * @param pMemBuffer pointer to the memory buffer where the HASH context - * is stored. - * @note The IMR, STR, CR then all the CSR registers are restored - * in that order. Only the r/w bits are restored. - * @note By default, all the context swap registers (HASH_NUMBER_OF_CSR_REGISTERS - * of those) are restored (all of them have been saved by default - * beforehand). - * @retval None - */ -void HAL_HASH_ContextRestoring(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer) -{ - uint32_t mem_ptr = (uint32_t)pMemBuffer; - uint32_t csr_ptr = (uint32_t)HASH->CSR; - uint32_t i; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhash); - - /* Restore IMR register content */ - WRITE_REG(HASH->IMR, (*(uint32_t *)(mem_ptr))); - mem_ptr += 4U; - /* Restore STR register content */ - WRITE_REG(HASH->STR, (*(uint32_t *)(mem_ptr))); - mem_ptr += 4U; - /* Restore CR register content */ - WRITE_REG(HASH->CR, (*(uint32_t *)(mem_ptr))); - mem_ptr += 4U; - - /* Reset the HASH processor before restoring the Context - Swap Registers (CSR) */ - __HAL_HASH_INIT(); - - /* By default, restore all CSR registers */ - for (i = HASH_NUMBER_OF_CSR_REGISTERS; i > 0U; i--) - { - WRITE_REG((*(uint32_t *)(csr_ptr)), (*(uint32_t *)(mem_ptr))); - mem_ptr += 4U; - csr_ptr += 4U; - } -} - - -/** - * @brief Initiate HASH processing suspension when in polling or interruption mode. - * @param hhash HASH handle. - * @note Set the handle field SuspendRequest to the appropriate value so that - * the on-going HASH processing is suspended as soon as the required - * conditions are met. Note that the actual suspension is carried out - * by the functions HASH_WriteData() in polling mode and HASH_IT() in - * interruption mode. - * @retval None - */ -void HAL_HASH_SwFeed_ProcessSuspend(HASH_HandleTypeDef *hhash) -{ - /* Set Handle Suspend Request field */ - hhash->SuspendRequest = HAL_HASH_SUSPEND; -} - -/** - * @brief Suspend the HASH processing when in DMA mode. - * @param hhash HASH handle. - * @note When suspension attempt occurs at the very end of a DMA transfer and - * all the data have already been entered in the Peripheral, hhash->State is - * set to HAL_HASH_STATE_READY and the API returns HAL_ERROR. It is - * recommended to wrap-up the processing in reading the digest as usual. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASH_DMAFeed_ProcessSuspend(HASH_HandleTypeDef *hhash) -{ - uint32_t tmp_remaining_DMATransferSize_inWords; - uint32_t tmp_initial_DMATransferSize_inWords; - uint32_t tmp_words_already_pushed; - - if (hhash->State == HAL_HASH_STATE_READY) - { - return HAL_ERROR; - } - else - { - - /* Make sure there is enough time to suspend the processing */ - tmp_remaining_DMATransferSize_inWords = ((DMA_Stream_TypeDef *)hhash->hdmain->Instance)->NDTR; - - if (tmp_remaining_DMATransferSize_inWords <= HASH_DMA_SUSPENSION_WORDS_LIMIT) - { - /* No suspension attempted since almost to the end of the transferred data. */ - /* Best option for user code is to wrap up low priority message hashing */ - return HAL_ERROR; - } - - /* Wait for BUSY flag to be reset */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK) - { - return HAL_TIMEOUT; - } - - if (__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS) != RESET) - { - return HAL_ERROR; - } - - /* Wait for BUSY flag to be set */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, RESET, HASH_TIMEOUTVALUE) != HAL_OK) - { - return HAL_TIMEOUT; - } - /* Disable DMA channel */ - /* Note that the Abort function will - - Clear the transfer error flags - - Unlock - - Set the State - */ - if (HAL_DMA_Abort(hhash->hdmain) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear DMAE bit */ - CLEAR_BIT(HASH->CR, HASH_CR_DMAE); - - /* Wait for BUSY flag to be reset */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK) - { - return HAL_TIMEOUT; - } - - if (__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS) != RESET) - { - return HAL_ERROR; - } - - /* At this point, DMA interface is disabled and no transfer is on-going */ - /* Retrieve from the DMA handle how many words remain to be written */ - tmp_remaining_DMATransferSize_inWords = ((DMA_Stream_TypeDef *)hhash->hdmain->Instance)->NDTR; - - if (tmp_remaining_DMATransferSize_inWords == 0U) - { - /* All the DMA transfer is actually done. Suspension occurred at the very end - of the transfer. Either the digest computation is about to start (HASH case) - or processing is about to move from one step to another (HMAC case). - In both cases, the processing can't be suspended at this point. It is - safer to - - retrieve the low priority block digest before starting the high - priority block processing (HASH case) - - re-attempt a new suspension (HMAC case) - */ - return HAL_ERROR; - } - else - { - - /* Compute how many words were supposed to be transferred by DMA */ - tmp_initial_DMATransferSize_inWords = (((hhash->HashInCount % 4U) != 0U) ? \ - ((hhash->HashInCount + 3U) / 4U) : (hhash->HashInCount / 4U)); - - /* If discrepancy between the number of words reported by DMA Peripheral and - the numbers of words entered as reported by HASH Peripheral, correct it */ - /* tmp_words_already_pushed reflects the number of words that were already pushed before - the start of DMA transfer (multi-buffer processing case) */ - tmp_words_already_pushed = hhash->NbWordsAlreadyPushed; - if (((tmp_words_already_pushed + tmp_initial_DMATransferSize_inWords - \ - tmp_remaining_DMATransferSize_inWords) % 16U) != HASH_NBW_PUSHED()) - { - tmp_remaining_DMATransferSize_inWords--; /* one less word to be transferred again */ - } - - /* Accordingly, update the input pointer that points at the next word to be - transferred to the Peripheral by DMA */ - hhash->pHashInBuffPtr += 4U * (tmp_initial_DMATransferSize_inWords - tmp_remaining_DMATransferSize_inWords) ; - - /* And store in HashInCount the remaining size to transfer (in bytes) */ - hhash->HashInCount = 4U * tmp_remaining_DMATransferSize_inWords; - - } - - /* Set State as suspended */ - hhash->State = HAL_HASH_STATE_SUSPENDED; - - return HAL_OK; - - } -} - -/** - * @brief Return the HASH handle error code. - * @param hhash pointer to a HASH_HandleTypeDef structure. - * @retval HASH Error Code - */ -uint32_t HAL_HASH_GetError(HASH_HandleTypeDef *hhash) -{ - /* Return HASH Error Code */ - return hhash->ErrorCode; -} -/** - * @} - */ - - -/** - * @} - */ - -/** @defgroup HASH_Private_Functions HASH Private Functions - * @{ - */ - -/** - * @brief DMA HASH Input Data transfer completion callback. - * @param hdma DMA handle. - * @note In case of HMAC processing, HASH_DMAXferCplt() initiates - * the next DMA transfer for the following HMAC step. - * @retval None - */ -static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma) -{ - HASH_HandleTypeDef *hhash = (HASH_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - uint32_t inputaddr; - uint32_t buffersize; - HAL_StatusTypeDef status = HAL_OK; - - if (hhash->State != HAL_HASH_STATE_SUSPENDED) - { - - /* Disable the DMA transfer */ - CLEAR_BIT(HASH->CR, HASH_CR_DMAE); - - if (READ_BIT(HASH->CR, HASH_CR_MODE) == 0U) - { - /* If no HMAC processing, input data transfer is now over */ - - /* Change the HASH state to ready */ - hhash->State = HAL_HASH_STATE_READY; - - /* Call Input data transfer complete call back */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->InCpltCallback(hhash); -#else - HAL_HASH_InCpltCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - } - else - { - /* HMAC processing: depending on the current HMAC step and whether or - not multi-buffer processing is on-going, the next step is initiated - and MDMAT bit is set. */ - - - if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3) - { - /* This is the end of HMAC processing */ - - /* Change the HASH state to ready */ - hhash->State = HAL_HASH_STATE_READY; - - /* Call Input data transfer complete call back - (note that the last DMA transfer was that of the key - for the outer HASH operation). */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->InCpltCallback(hhash); -#else - HAL_HASH_InCpltCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - return; - } - else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) - { - inputaddr = (uint32_t)hhash->pHashMsgBuffPtr; /* DMA transfer start address */ - buffersize = hhash->HashBuffSize; /* DMA transfer size (in bytes) */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; /* Move phase from Step 1 to Step 2 */ - - /* In case of suspension request, save the new starting parameters */ - hhash->HashInCount = hhash->HashBuffSize; /* Initial DMA transfer size (in bytes) */ - hhash->pHashInBuffPtr = hhash->pHashMsgBuffPtr ; /* DMA transfer start address */ - - hhash->NbWordsAlreadyPushed = 0U; /* Reset number of words already pushed */ -#if defined(HASH_CR_MDMAT) - /* Check whether or not digest calculation must be disabled (in case of multi-buffer HMAC processing) */ - if (hhash->DigestCalculationDisable != RESET) - { - /* Digest calculation is disabled: Step 2 must start with MDMAT bit set, - no digest calculation will be triggered at the end of the input buffer feeding to the Peripheral */ - __HAL_HASH_SET_MDMAT(); - } -#endif /* HASH_CR_MDMAT*/ - } - else /*case (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)*/ - { - if (hhash->DigestCalculationDisable != RESET) - { - /* No automatic move to Step 3 as a new message buffer will be fed to the Peripheral - (case of multi-buffer HMAC processing): - DCAL must not be set. - Phase remains in Step 2, MDMAT remains set at this point. - Change the HASH state to ready and call Input data transfer complete call back. */ - hhash->State = HAL_HASH_STATE_READY; -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->InCpltCallback(hhash); -#else - HAL_HASH_InCpltCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - return ; - } - else - { - /* Digest calculation is not disabled (case of single buffer input or last buffer - of multi-buffer HMAC processing) */ - inputaddr = (uint32_t)hhash->Init.pKey; /* DMA transfer start address */ - buffersize = hhash->Init.KeySize; /* DMA transfer size (in bytes) */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; /* Move phase from Step 2 to Step 3 */ - /* In case of suspension request, save the new starting parameters */ - hhash->HashInCount = hhash->Init.KeySize; /* Initial size for second DMA transfer (input data) */ - hhash->pHashInBuffPtr = hhash->Init.pKey ; /* address passed to DMA, now entering data message */ - - hhash->NbWordsAlreadyPushed = 0U; /* Reset number of words already pushed */ - } - } - - /* Configure the Number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(buffersize); - - /* Set the HASH DMA transfer completion call back */ - hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt; - - /* Enable the DMA In DMA stream */ - status = HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, \ - (((buffersize % 4U) != 0U) ? ((buffersize + (4U - (buffersize % 4U))) / 4U) : \ - (buffersize / 4U))); - - /* Enable DMA requests */ - SET_BIT(HASH->CR, HASH_CR_DMAE); - - /* Return function status */ - if (status != HAL_OK) - { - /* Update HASH state machine to error */ - hhash->State = HAL_HASH_STATE_ERROR; - } - else - { - /* Change HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - } - } - } - - return; -} - -/** - * @brief DMA HASH communication error callback. - * @param hdma DMA handle. - * @note HASH_DMAError() callback invokes HAL_HASH_ErrorCallback() that - * can contain user code to manage the error. - * @retval None - */ -static void HASH_DMAError(DMA_HandleTypeDef *hdma) -{ - HASH_HandleTypeDef *hhash = (HASH_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hhash->State != HAL_HASH_STATE_SUSPENDED) - { - hhash->ErrorCode |= HAL_HASH_ERROR_DMA; - /* Set HASH state to ready to prevent any blocking issue in user code - present in HAL_HASH_ErrorCallback() */ - hhash->State = HAL_HASH_STATE_READY; - /* Set HASH handle status to error */ - hhash->Status = HAL_ERROR; -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->ErrorCallback(hhash); -#else - HAL_HASH_ErrorCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - /* After error handling by code user, reset HASH handle HAL status */ - hhash->Status = HAL_OK; - - } -} - -/** - * @brief Feed the input buffer to the HASH Peripheral. - * @param hhash HASH handle. - * @param pInBuffer pointer to input buffer. - * @param Size the size of input buffer in bytes. - * @note HASH_WriteData() regularly reads hhash->SuspendRequest to check whether - * or not the HASH processing must be suspended. If this is the case, the - * processing is suspended when possible and the Peripheral feeding point reached at - * suspension time is stored in the handle for resumption later on. - * @retval HAL status - */ -static HAL_StatusTypeDef HASH_WriteData(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - uint32_t buffercounter; - __IO uint32_t inputaddr = (uint32_t) pInBuffer; - - for (buffercounter = 0U; buffercounter < Size; buffercounter += 4U) - { - /* Write input data 4 bytes at a time */ - HASH->DIN = *(uint32_t *)inputaddr; - inputaddr += 4U; - - /* If the suspension flag has been raised and if the processing is not about - to end, suspend processing */ - if ((hhash->SuspendRequest == HAL_HASH_SUSPEND) && ((buffercounter + 4U) < Size)) - { - /* Wait for DINIS = 1, which occurs when 16 32-bit locations are free - in the input buffer */ - if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS)) - { - /* Reset SuspendRequest */ - hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE; - - /* Depending whether the key or the input data were fed to the Peripheral, the feeding point - reached at suspension time is not saved in the same handle fields */ - if ((hhash->Phase == HAL_HASH_PHASE_PROCESS) || (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2)) - { - /* Save current reading and writing locations of Input and Output buffers */ - hhash->pHashInBuffPtr = (uint8_t *)inputaddr; - /* Save the number of bytes that remain to be processed at this point */ - hhash->HashInCount = Size - (buffercounter + 4U); - } - else if ((hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3)) - { - /* Save current reading and writing locations of Input and Output buffers */ - hhash->pHashKeyBuffPtr = (uint8_t *)inputaddr; - /* Save the number of bytes that remain to be processed at this point */ - hhash->HashKeyCount = Size - (buffercounter + 4U); - } - else - { - /* Unexpected phase: unlock process and report error */ - hhash->State = HAL_HASH_STATE_READY; - __HAL_UNLOCK(hhash); - return HAL_ERROR; - } - - /* Set the HASH state to Suspended and exit to stop entering data */ - hhash->State = HAL_HASH_STATE_SUSPENDED; - - return HAL_OK; - } /* if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS)) */ - } /* if ((hhash->SuspendRequest == HAL_HASH_SUSPEND) && ((buffercounter+4) < Size)) */ - } /* for(buffercounter = 0; buffercounter < Size; buffercounter+=4) */ - - /* At this point, all the data have been entered to the Peripheral: exit */ - return HAL_OK; -} - -/** - * @brief Retrieve the message digest. - * @param pMsgDigest pointer to the computed digest. - * @param Size message digest size in bytes. - * @retval None - */ -static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size) -{ - uint32_t msgdigest = (uint32_t)pMsgDigest; - - switch (Size) - { - /* Read the message digest */ - case 16: /* MD5 */ - *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]); - break; - case 20: /* SHA1 */ - *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[4]); - break; - case 28: /* SHA224 */ - *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[4]); -#if defined(HASH_CR_MDMAT) - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]); -#endif /* HASH_CR_MDMAT*/ - break; - case 32: /* SHA256 */ - *(uint32_t *)(msgdigest) = __REV(HASH->HR[0]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[1]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[2]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[3]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH->HR[4]); -#if defined(HASH_CR_MDMAT) - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]); - msgdigest += 4U; - *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[7]); -#endif /* HASH_CR_MDMAT*/ - break; - default: - break; - } -} - - - -/** - * @brief Handle HASH processing Timeout. - * @param hhash HASH handle. - * @param Flag specifies the HASH flag to check. - * @param Status the Flag status (SET or RESET). - * @param Timeout Timeout duration. - * @retval HAL status - */ -static HAL_StatusTypeDef HASH_WaitOnFlagUntilTimeout(HASH_HandleTypeDef *hhash, uint32_t Flag, FlagStatus Status, - uint32_t Timeout) -{ - uint32_t tickstart = HAL_GetTick(); - - /* Wait until flag is set */ - if (Status == RESET) - { - while (__HAL_HASH_GET_FLAG(Flag) == RESET) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Set State to Ready to be able to restart later on */ - hhash->State = HAL_HASH_STATE_READY; - /* Store time out issue in handle status */ - hhash->Status = HAL_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - return HAL_TIMEOUT; - } - } - } - } - else - { - while (__HAL_HASH_GET_FLAG(Flag) != RESET) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Set State to Ready to be able to restart later on */ - hhash->State = HAL_HASH_STATE_READY; - /* Store time out issue in handle status */ - hhash->Status = HAL_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - - -/** - * @brief HASH processing in interruption mode. - * @param hhash HASH handle. - * @note HASH_IT() regularly reads hhash->SuspendRequest to check whether - * or not the HASH processing must be suspended. If this is the case, the - * processing is suspended when possible and the Peripheral feeding point reached at - * suspension time is stored in the handle for resumption later on. - * @retval HAL status - */ -static HAL_StatusTypeDef HASH_IT(HASH_HandleTypeDef *hhash) -{ - if (hhash->State == HAL_HASH_STATE_BUSY) - { - /* ITCounter must not be equal to 0 at this point. Report an error if this is the case. */ - if (hhash->HashITCounter == 0U) - { - /* Disable Interrupts */ - __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - /* HASH state set back to Ready to prevent any issue in user code - present in HAL_HASH_ErrorCallback() */ - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - else if (hhash->HashITCounter == 1U) - { - /* This is the first call to HASH_IT, the first input data are about to be - entered in the Peripheral. A specific processing is carried out at this point to - start-up the processing. */ - hhash->HashITCounter = 2U; - } - else - { - /* Cruise speed reached, HashITCounter remains equal to 3 until the end of - the HASH processing or the end of the current step for HMAC processing. */ - hhash->HashITCounter = 3U; - } - - /* If digest is ready */ - if (__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS)) - { - /* Read the digest */ - HASH_GetDigest(hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH()); - - /* Disable Interrupts */ - __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - /* Reset HASH state machine */ - hhash->Phase = HAL_HASH_PHASE_READY; - /* Call digest computation complete call back */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->DgstCpltCallback(hhash); -#else - HAL_HASH_DgstCpltCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - return HAL_OK; - } - - /* If Peripheral ready to accept new data */ - if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS)) - { - - /* If the suspension flag has been raised and if the processing is not about - to end, suspend processing */ - if ((hhash->HashInCount != 0U) && (hhash->SuspendRequest == HAL_HASH_SUSPEND)) - { - /* Disable Interrupts */ - __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - - /* Reset SuspendRequest */ - hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE; - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_SUSPENDED; - - return HAL_OK; - } - - /* Enter input data in the Peripheral through HASH_Write_Block_Data() call and - check whether the digest calculation has been triggered */ - if (HASH_Write_Block_Data(hhash) == HASH_DIGEST_CALCULATION_STARTED) - { - /* Call Input data transfer complete call back - (called at the end of each step for HMAC) */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->InCpltCallback(hhash); -#else - HAL_HASH_InCpltCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - - if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) - { - /* Wait until Peripheral is not busy anymore */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK) - { - /* Disable Interrupts */ - __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - return HAL_TIMEOUT; - } - /* Initialization start for HMAC STEP 2 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; /* Move phase from Step 1 to Step 2 */ - __HAL_HASH_SET_NBVALIDBITS(hhash->HashBuffSize); /* Set NBLW for the input message */ - hhash->HashInCount = hhash->HashBuffSize; /* Set the input data size (in bytes) */ - hhash->pHashInBuffPtr = hhash->pHashMsgBuffPtr; /* Set the input data address */ - hhash->HashITCounter = 1; /* Set ITCounter to 1 to indicate the start - of a new phase */ - __HAL_HASH_ENABLE_IT(HASH_IT_DINI); /* Enable IT (was disabled in HASH_Write_Block_Data) */ - } - else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2) - { - /* Wait until Peripheral is not busy anymore */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, HASH_TIMEOUTVALUE) != HAL_OK) - { - /* Disable Interrupts */ - __HAL_HASH_DISABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - return HAL_TIMEOUT; - } - /* Initialization start for HMAC STEP 3 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; /* Move phase from Step 2 to Step 3 */ - __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize); /* Set NBLW for the key */ - hhash->HashInCount = hhash->Init.KeySize; /* Set the key size (in bytes) */ - hhash->pHashInBuffPtr = hhash->Init.pKey; /* Set the key address */ - hhash->HashITCounter = 1; /* Set ITCounter to 1 to indicate the start - of a new phase */ - __HAL_HASH_ENABLE_IT(HASH_IT_DINI); /* Enable IT (was disabled in HASH_Write_Block_Data) */ - } - else - { - /* Nothing to do */ - } - } /* if (HASH_Write_Block_Data(hhash) == HASH_DIGEST_CALCULATION_STARTED) */ - } /* if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))*/ - - /* Return function status */ - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - - -/** - * @brief Write a block of data in HASH Peripheral in interruption mode. - * @param hhash HASH handle. - * @note HASH_Write_Block_Data() is called under interruption by HASH_IT(). - * @retval HAL status - */ -static uint32_t HASH_Write_Block_Data(HASH_HandleTypeDef *hhash) -{ - uint32_t inputaddr; - uint32_t buffercounter; - uint32_t inputcounter; - uint32_t ret = HASH_DIGEST_CALCULATION_NOT_STARTED; - - /* If there are more than 64 bytes remaining to be entered */ - if (hhash->HashInCount > 64U) - { - inputaddr = (uint32_t)hhash->pHashInBuffPtr; - /* Write the Input block in the Data IN register - (16 32-bit words, or 64 bytes are entered) */ - for (buffercounter = 0U; buffercounter < 64U; buffercounter += 4U) - { - HASH->DIN = *(uint32_t *)inputaddr; - inputaddr += 4U; - } - /* If this is the start of input data entering, an additional word - must be entered to start up the HASH processing */ - if (hhash->HashITCounter == 2U) - { - HASH->DIN = *(uint32_t *)inputaddr; - if (hhash->HashInCount >= 68U) - { - /* There are still data waiting to be entered in the Peripheral. - Decrement buffer counter and set pointer to the proper - memory location for the next data entering round. */ - hhash->HashInCount -= 68U; - hhash->pHashInBuffPtr += 68U; - } - else - { - /* All the input buffer has been fed to the HW. */ - hhash->HashInCount = 0U; - } - } - else - { - /* 64 bytes have been entered and there are still some remaining: - Decrement buffer counter and set pointer to the proper - memory location for the next data entering round.*/ - hhash->HashInCount -= 64U; - hhash->pHashInBuffPtr += 64U; - } - } - else - { - /* 64 or less bytes remain to be entered. This is the last - data entering round. */ - - /* Get the buffer address */ - inputaddr = (uint32_t)hhash->pHashInBuffPtr; - /* Get the buffer counter */ - inputcounter = hhash->HashInCount; - /* Disable Interrupts */ - __HAL_HASH_DISABLE_IT(HASH_IT_DINI); - - /* Write the Input block in the Data IN register */ - for (buffercounter = 0U; buffercounter < ((inputcounter + 3U) / 4U); buffercounter++) - { - HASH->DIN = *(uint32_t *)inputaddr; - inputaddr += 4U; - } - - if (hhash->Accumulation == 1U) - { - /* Field accumulation is set, API only feeds data to the Peripheral and under interruption. - The digest computation will be started when the last buffer data are entered. */ - - /* Reset multi buffers accumulation flag */ - hhash->Accumulation = 0U; - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - /* Call Input data transfer complete call back */ -#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) - hhash->InCpltCallback(hhash); -#else - HAL_HASH_InCpltCallback(hhash); -#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ - } - else - { - /* Start the Digest calculation */ - __HAL_HASH_START_DIGEST(); - /* Return indication that digest calculation has started: - this return value triggers the call to Input data transfer - complete call back as well as the proper transition from - one step to another in HMAC mode. */ - ret = HASH_DIGEST_CALCULATION_STARTED; - } - /* Reset buffer counter */ - hhash->HashInCount = 0; - } - - /* Return whether or digest calculation has started */ - return ret; -} - -/** - * @brief HMAC processing in polling mode. - * @param hhash HASH handle. - * @param Timeout Timeout value. - * @retval HAL status - */ -static HAL_StatusTypeDef HMAC_Processing(HASH_HandleTypeDef *hhash, uint32_t Timeout) -{ - /* Ensure first that Phase is correct */ - if ((hhash->Phase != HAL_HASH_PHASE_HMAC_STEP_1) && (hhash->Phase != HAL_HASH_PHASE_HMAC_STEP_2) - && (hhash->Phase != HAL_HASH_PHASE_HMAC_STEP_3)) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_ERROR; - } - - /* HMAC Step 1 processing */ - if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) - { - /************************** STEP 1 ******************************************/ - /* Configure the Number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize); - - /* Write input buffer in Data register */ - hhash->Status = HASH_WriteData(hhash, hhash->pHashKeyBuffPtr, hhash->HashKeyCount); - if (hhash->Status != HAL_OK) - { - return hhash->Status; - } - - /* Check whether or not key entering process has been suspended */ - if (hhash->State == HAL_HASH_STATE_SUSPENDED) - { - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Stop right there and return function status */ - return HAL_OK; - } - - /* No processing suspension at this point: set DCAL bit. */ - __HAL_HASH_START_DIGEST(); - - /* Wait for BUSY flag to be cleared */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Move from Step 1 to Step 2 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; - - } - - /* HMAC Step 2 processing. - After phase check, HMAC_Processing() may - - directly start up from this point in resumption case - if the same Step 2 processing was suspended previously - - or fall through from the Step 1 processing carried out hereabove */ - if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2) - { - /************************** STEP 2 ******************************************/ - /* Configure the Number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(hhash->HashBuffSize); - - /* Write input buffer in Data register */ - hhash->Status = HASH_WriteData(hhash, hhash->pHashInBuffPtr, hhash->HashInCount); - if (hhash->Status != HAL_OK) - { - return hhash->Status; - } - - /* Check whether or not data entering process has been suspended */ - if (hhash->State == HAL_HASH_STATE_SUSPENDED) - { - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Stop right there and return function status */ - return HAL_OK; - } - - /* No processing suspension at this point: set DCAL bit. */ - __HAL_HASH_START_DIGEST(); - - /* Wait for BUSY flag to be cleared */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Move from Step 2 to Step 3 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; - /* In case Step 1 phase was suspended then resumed, - set again Key input buffers and size before moving to - next step */ - hhash->pHashKeyBuffPtr = hhash->Init.pKey; - hhash->HashKeyCount = hhash->Init.KeySize; - } - - - /* HMAC Step 3 processing. - After phase check, HMAC_Processing() may - - directly start up from this point in resumption case - if the same Step 3 processing was suspended previously - - or fall through from the Step 2 processing carried out hereabove */ - if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3) - { - /************************** STEP 3 ******************************************/ - /* Configure the Number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize); - - /* Write input buffer in Data register */ - hhash->Status = HASH_WriteData(hhash, hhash->pHashKeyBuffPtr, hhash->HashKeyCount); - if (hhash->Status != HAL_OK) - { - return hhash->Status; - } - - /* Check whether or not key entering process has been suspended */ - if (hhash->State == HAL_HASH_STATE_SUSPENDED) - { - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Stop right there and return function status */ - return HAL_OK; - } - - /* No processing suspension at this point: start the Digest calculation. */ - __HAL_HASH_START_DIGEST(); - - /* Wait for DCIS flag to be set */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read the message digest */ - HASH_GetDigest(hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH()); - - /* Reset HASH state machine */ - hhash->Phase = HAL_HASH_PHASE_READY; - } - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_OK; -} - - -/** - * @brief Initialize the HASH peripheral, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. - * @param Timeout Timeout value. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HASH_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout, uint32_t Algorithm) -{ - uint8_t *pInBuffer_tmp; /* input data address, input parameter of HASH_WriteData() */ - uint32_t Size_tmp; /* input data size (in bytes), input parameter of HASH_WriteData() */ - HAL_HASH_StateTypeDef State_tmp = hhash->State; - - - /* Initiate HASH processing in case of start or resumption */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (pOutBuffer == NULL)) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* Check if initialization phase has not been already performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */ - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT); - - /* Configure the number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(Size); - - /* pInBuffer_tmp and Size_tmp are initialized to be used afterwards as - input parameters of HASH_WriteData() */ - pInBuffer_tmp = pInBuffer; /* pInBuffer_tmp is set to the input data address */ - Size_tmp = Size; /* Size_tmp contains the input data size in bytes */ - - /* Set the phase */ - hhash->Phase = HAL_HASH_PHASE_PROCESS; - } - else if (hhash->Phase == HAL_HASH_PHASE_PROCESS) - { - /* if the Peripheral has already been initialized, two cases are possible */ - - /* Process resumption time ... */ - if (hhash->State == HAL_HASH_STATE_SUSPENDED) - { - /* Since this is resumption, pInBuffer_tmp and Size_tmp are not set - to the API input parameters but to those saved beforehand by HASH_WriteData() - when the processing was suspended */ - pInBuffer_tmp = hhash->pHashInBuffPtr; - Size_tmp = hhash->HashInCount; - } - /* ... or multi-buffer HASH processing end */ - else - { - /* pInBuffer_tmp and Size_tmp are initialized to be used afterwards as - input parameters of HASH_WriteData() */ - pInBuffer_tmp = pInBuffer; - Size_tmp = Size; - /* Configure the number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(Size); - } - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - } - else - { - /* Phase error */ - hhash->State = HAL_HASH_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_ERROR; - } - - - /* Write input buffer in Data register */ - hhash->Status = HASH_WriteData(hhash, pInBuffer_tmp, Size_tmp); - if (hhash->Status != HAL_OK) - { - return hhash->Status; - } - - /* If the process has not been suspended, carry on to digest calculation */ - if (hhash->State != HAL_HASH_STATE_SUSPENDED) - { - /* Start the Digest calculation */ - __HAL_HASH_START_DIGEST(); - - /* Wait for DCIS flag to be set */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read the message digest */ - HASH_GetDigest(pOutBuffer, HASH_DIGEST_LENGTH()); - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - - /* Reset HASH state machine */ - hhash->Phase = HAL_HASH_PHASE_READY; - - } - - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_OK; - - } - else - { - return HAL_BUSY; - } -} - - -/** - * @brief If not already done, initialize the HASH peripheral then - * processes pInBuffer. - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HASH_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm) -{ - uint8_t *pInBuffer_tmp; /* input data address, input parameter of HASH_WriteData() */ - uint32_t Size_tmp; /* input data size (in bytes), input parameter of HASH_WriteData() */ - HAL_HASH_StateTypeDef State_tmp = hhash->State; - - /* Make sure the input buffer size (in bytes) is a multiple of 4 */ - if ((Size % 4U) != 0U) - { - return HAL_ERROR; - } - - /* Initiate HASH processing in case of start or resumption */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U)) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* If resuming the HASH processing */ - if (hhash->State == HAL_HASH_STATE_SUSPENDED) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Since this is resumption, pInBuffer_tmp and Size_tmp are not set - to the API input parameters but to those saved beforehand by HASH_WriteData() - when the processing was suspended */ - pInBuffer_tmp = hhash->pHashInBuffPtr; /* pInBuffer_tmp is set to the input data address */ - Size_tmp = hhash->HashInCount; /* Size_tmp contains the input data size in bytes */ - - } - else - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* pInBuffer_tmp and Size_tmp are initialized to be used afterwards as - input parameters of HASH_WriteData() */ - pInBuffer_tmp = pInBuffer; /* pInBuffer_tmp is set to the input data address */ - Size_tmp = Size; /* Size_tmp contains the input data size in bytes */ - - /* Check if initialization phase has already be performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */ - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT); - } - - /* Set the phase */ - hhash->Phase = HAL_HASH_PHASE_PROCESS; - - } - - /* Write input buffer in Data register */ - hhash->Status = HASH_WriteData(hhash, pInBuffer_tmp, Size_tmp); - if (hhash->Status != HAL_OK) - { - return hhash->Status; - } - - /* If the process has not been suspended, move the state to Ready */ - if (hhash->State != HAL_HASH_STATE_SUSPENDED) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_OK; - - } - else - { - return HAL_BUSY; - } - - -} - - -/** - * @brief If not already done, initialize the HASH peripheral then - * processes pInBuffer in interruption mode. - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm) -{ - HAL_HASH_StateTypeDef State_tmp = hhash->State; - __IO uint32_t inputaddr = (uint32_t) pInBuffer; - uint32_t SizeVar = Size; - - /* Make sure the input buffer size (in bytes) is a multiple of 4 */ - if ((Size % 4U) != 0U) - { - return HAL_ERROR; - } - - /* Initiate HASH processing in case of start or resumption */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U)) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* If resuming the HASH processing */ - if (hhash->State == HAL_HASH_STATE_SUSPENDED) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - } - else - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Check if initialization phase has already be performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */ - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT); - hhash->HashITCounter = 1; - } - else - { - hhash->HashITCounter = 3; /* 'cruise-speed' reached during a previous buffer processing */ - } - - /* Set the phase */ - hhash->Phase = HAL_HASH_PHASE_PROCESS; - - /* If DINIS is equal to 0 (for example if an incomplete block has been previously - fed to the Peripheral), the DINIE interruption won't be triggered when DINIE is set. - Therefore, first words are manually entered until DINIS raises, or until there - is not more data to enter. */ - while ((!(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))) && (SizeVar > 0U)) - { - - /* Write input data 4 bytes at a time */ - HASH->DIN = *(uint32_t *)inputaddr; - inputaddr += 4U; - SizeVar -= 4U; - } - - /* If DINIS is still not set or if all the data have been fed, stop here */ - if ((!(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))) || (SizeVar == 0U)) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_READY; - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_OK; - } - - /* otherwise, carry on in interrupt-mode */ - hhash->HashInCount = SizeVar; /* Counter used to keep track of number of data - to be fed to the Peripheral */ - hhash->pHashInBuffPtr = (uint8_t *)inputaddr; /* Points at data which will be fed to the Peripheral at - the next interruption */ - /* In case of suspension, hhash->HashInCount and hhash->pHashInBuffPtr contain - the information describing where the HASH process is stopped. - These variables are used later on to resume the HASH processing at the - correct location. */ - - } - - /* Set multi buffers accumulation flag */ - hhash->Accumulation = 1U; - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Enable Data Input interrupt */ - __HAL_HASH_ENABLE_IT(HASH_IT_DINI); - - /* Return function status */ - return HAL_OK; - - } - else - { - return HAL_BUSY; - } - -} - - - -/** - * @brief Initialize the HASH peripheral, next process pInBuffer then - * read the computed digest in interruption mode. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HASH_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Algorithm) -{ - HAL_HASH_StateTypeDef State_tmp = hhash->State; - __IO uint32_t inputaddr = (uint32_t) pInBuffer; - uint32_t polling_step = 0U; - uint32_t initialization_skipped = 0U; - uint32_t SizeVar = Size; - - /* If State is ready or suspended, start or resume IT-based HASH processing */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U) || (pOutBuffer == NULL)) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Initialize IT counter */ - hhash->HashITCounter = 1; - - /* Check if initialization phase has already be performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */ - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT); - - /* Configure the number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(SizeVar); - - - hhash->HashInCount = SizeVar; /* Counter used to keep track of number of data - to be fed to the Peripheral */ - hhash->pHashInBuffPtr = pInBuffer; /* Points at data which will be fed to the Peripheral at - the next interruption */ - /* In case of suspension, hhash->HashInCount and hhash->pHashInBuffPtr contain - the information describing where the HASH process is stopped. - These variables are used later on to resume the HASH processing at the - correct location. */ - - hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */ - } - else - { - initialization_skipped = 1; /* info user later on in case of multi-buffer */ - } - - /* Set the phase */ - hhash->Phase = HAL_HASH_PHASE_PROCESS; - - /* If DINIS is equal to 0 (for example if an incomplete block has been previously - fed to the Peripheral), the DINIE interruption won't be triggered when DINIE is set. - Therefore, first words are manually entered until DINIS raises. */ - while ((!(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))) && (SizeVar > 3U)) - { - polling_step = 1U; /* note that some words are entered before enabling the interrupt */ - - /* Write input data 4 bytes at a time */ - HASH->DIN = *(uint32_t *)inputaddr; - inputaddr += 4U; - SizeVar -= 4U; - } - - if (polling_step == 1U) - { - if (SizeVar == 0U) - { - /* If all the data have been entered at this point, it only remains to - read the digest */ - hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */ - - /* Start the Digest calculation */ - __HAL_HASH_START_DIGEST(); - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Enable Interrupts */ - __HAL_HASH_ENABLE_IT(HASH_IT_DCI); - - /* Return function status */ - return HAL_OK; - } - else if (__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS)) - { - /* It remains data to enter and the Peripheral is ready to trigger DINIE, - carry on as usual. - Update HashInCount and pHashInBuffPtr accordingly. */ - hhash->HashInCount = SizeVar; - hhash->pHashInBuffPtr = (uint8_t *)inputaddr; - /* Update the configuration of the number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(SizeVar); - hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */ - if (initialization_skipped == 1U) - { - hhash->HashITCounter = 3; /* 'cruise-speed' reached during a previous buffer processing */ - } - } - else - { - /* DINIS is not set but it remains a few data to enter (not enough for a full word). - Manually enter the last bytes before enabling DCIE. */ - __HAL_HASH_SET_NBVALIDBITS(SizeVar); - HASH->DIN = *(uint32_t *)inputaddr; - - /* Start the Digest calculation */ - hhash->pHashOutBuffPtr = pOutBuffer; /* Points at the computed digest */ - __HAL_HASH_START_DIGEST(); - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Enable Interrupts */ - __HAL_HASH_ENABLE_IT(HASH_IT_DCI); - - /* Return function status */ - return HAL_OK; - } - } /* if (polling_step == 1) */ - - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Enable Interrupts */ - __HAL_HASH_ENABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - - /* Return function status */ - return HAL_OK; - } - else - { - return HAL_BUSY; - } - -} - - -/** - * @brief Initialize the HASH peripheral then initiate a DMA transfer - * to feed the input buffer to the Peripheral. - * @note If MDMAT bit is set before calling this function (multi-buffer - * HASH processing case), the input buffer size (in bytes) must be - * a multiple of 4 otherwise, the HASH digest computation is corrupted. - * For the processing of the last buffer of the thread, MDMAT bit must - * be reset and the buffer length (in bytes) doesn't have to be a - * multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HASH_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm) -{ - uint32_t inputaddr; - uint32_t inputSize; - HAL_StatusTypeDef status ; - HAL_HASH_StateTypeDef State_tmp = hhash->State; - -#if defined (HASH_CR_MDMAT) - /* Make sure the input buffer size (in bytes) is a multiple of 4 when MDMAT bit is set - (case of multi-buffer HASH processing) */ - assert_param(IS_HASH_DMA_MULTIBUFFER_SIZE(Size)); -#endif /* MDMA defined*/ - /* If State is ready or suspended, start or resume polling-based HASH processing */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U) || - /* Check phase coherency. Phase must be - either READY (fresh start) - or PROCESS (multi-buffer HASH management) */ - ((hhash->Phase != HAL_HASH_PHASE_READY) && (!(IS_HASH_PROCESSING(hhash))))) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* If not a resumption case */ - if (hhash->State == HAL_HASH_STATE_READY) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Check if initialization phase has already been performed. - If Phase is already set to HAL_HASH_PHASE_PROCESS, this means the - API is processing a new input data message in case of multi-buffer HASH - computation. */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Select the HASH algorithm, clear HMAC mode and long key selection bit, reset the HASH processor core */ - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, Algorithm | HASH_CR_INIT); - - /* Set the phase */ - hhash->Phase = HAL_HASH_PHASE_PROCESS; - } - - /* Configure the Number of valid bits in last word of the message */ - __HAL_HASH_SET_NBVALIDBITS(Size); - - inputaddr = (uint32_t)pInBuffer; /* DMA transfer start address */ - inputSize = Size; /* DMA transfer size (in bytes) */ - - /* In case of suspension request, save the starting parameters */ - hhash->pHashInBuffPtr = pInBuffer; /* DMA transfer start address */ - hhash->HashInCount = Size; /* DMA transfer size (in bytes) */ - - } - /* If resumption case */ - else - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Resumption case, inputaddr and inputSize are not set to the API input parameters - but to those saved beforehand by HAL_HASH_DMAFeed_ProcessSuspend() when the - processing was suspended */ - inputaddr = (uint32_t)hhash->pHashInBuffPtr; /* DMA transfer start address */ - inputSize = hhash->HashInCount; /* DMA transfer size (in bytes) */ - - } - - /* Set the HASH DMA transfer complete callback */ - hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt; - /* Set the DMA error callback */ - hhash->hdmain->XferErrorCallback = HASH_DMAError; - - /* Store number of words already pushed to manage proper DMA processing suspension */ - hhash->NbWordsAlreadyPushed = HASH_NBW_PUSHED(); - - /* Enable the DMA In DMA stream */ - status = HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, \ - (((inputSize % 4U) != 0U) ? ((inputSize + (4U - (inputSize % 4U))) / 4U) : \ - (inputSize / 4U))); - - /* Enable DMA requests */ - SET_BIT(HASH->CR, HASH_CR_DMAE); - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - if (status != HAL_OK) - { - /* Update HASH state machine to error */ - hhash->State = HAL_HASH_STATE_ERROR; - } - - return status; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Return the computed digest. - * @note The API waits for DCIS to be set then reads the computed digest. - * @param hhash HASH handle. - * @param pOutBuffer pointer to the computed digest. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HASH_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout) -{ - - if (hhash->State == HAL_HASH_STATE_READY) - { - /* Check parameter */ - if (pOutBuffer == NULL) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* Change the HASH state to busy */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Wait for DCIS flag to be set */ - if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read the message digest */ - HASH_GetDigest(pOutBuffer, HASH_DIGEST_LENGTH()); - - /* Change the HASH state to ready */ - hhash->State = HAL_HASH_STATE_READY; - - /* Reset HASH state machine */ - hhash->Phase = HAL_HASH_PHASE_READY; - - /* Process UnLock */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - return HAL_OK; - - } - else - { - return HAL_BUSY; - } - -} - - -/** - * @brief Initialize the HASH peripheral in HMAC mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. - * @param Timeout Timeout value. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HMAC_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Timeout, uint32_t Algorithm) -{ - HAL_HASH_StateTypeDef State_tmp = hhash->State; - - /* If State is ready or suspended, start or resume polling-based HASH processing */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U) || (hhash->Init.pKey == NULL) || (hhash->Init.KeySize == 0U) - || (pOutBuffer == NULL)) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Check if initialization phase has already be performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits */ - if (hhash->Init.KeySize > 64U) - { - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT); - } - else - { - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT); - } - /* Set the phase to Step 1 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1; - /* Resort to hhash internal fields to feed the Peripheral. - Parameters will be updated in case of suspension to contain the proper - information at resumption time. */ - hhash->pHashOutBuffPtr = pOutBuffer; /* Output digest address */ - hhash->pHashInBuffPtr = pInBuffer; /* Input data address, HMAC_Processing input - parameter for Step 2 */ - hhash->HashInCount = Size; /* Input data size, HMAC_Processing input - parameter for Step 2 */ - hhash->HashBuffSize = Size; /* Store the input buffer size for the whole HMAC process*/ - hhash->pHashKeyBuffPtr = hhash->Init.pKey; /* Key address, HMAC_Processing input parameter for Step - 1 and Step 3 */ - hhash->HashKeyCount = hhash->Init.KeySize; /* Key size, HMAC_Processing input parameter for Step 1 - and Step 3 */ - } - - /* Carry out HMAC processing */ - return HMAC_Processing(hhash, Timeout); - - } - else - { - return HAL_BUSY; - } -} - - - -/** - * @brief Initialize the HASH peripheral in HMAC mode, next process pInBuffer then - * read the computed digest in interruption mode. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HMAC_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer, - uint32_t Algorithm) -{ - HAL_HASH_StateTypeDef State_tmp = hhash->State; - - /* If State is ready or suspended, start or resume IT-based HASH processing */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U) || (hhash->Init.pKey == NULL) || (hhash->Init.KeySize == 0U) - || (pOutBuffer == NULL)) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Initialize IT counter */ - hhash->HashITCounter = 1; - - /* Check if initialization phase has already be performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits */ - if (hhash->Init.KeySize > 64U) - { - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT); - } - else - { - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT); - } - - /* Resort to hhash internal fields hhash->pHashInBuffPtr and hhash->HashInCount - to feed the Peripheral whatever the HMAC step. - Lines below are set to start HMAC Step 1 processing where key is entered first. */ - hhash->HashInCount = hhash->Init.KeySize; /* Key size */ - hhash->pHashInBuffPtr = hhash->Init.pKey ; /* Key address */ - - /* Store input and output parameters in handle fields to manage steps transition - or possible HMAC suspension/resumption */ - hhash->pHashKeyBuffPtr = hhash->Init.pKey; /* Key address */ - hhash->pHashMsgBuffPtr = pInBuffer; /* Input message address */ - hhash->HashBuffSize = Size; /* Input message size (in bytes) */ - hhash->pHashOutBuffPtr = pOutBuffer; /* Output digest address */ - - /* Configure the number of valid bits in last word of the key */ - __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize); - - /* Set the phase to Step 1 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1; - } - else if ((hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3)) - { - /* Restart IT-based HASH processing after Step 1 or Step 3 suspension */ - - } - else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2) - { - /* Restart IT-based HASH processing after Step 2 suspension */ - - } - else - { - /* Error report as phase incorrect */ - /* Process Unlock */ - __HAL_UNLOCK(hhash); - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - /* Process Unlock */ - __HAL_UNLOCK(hhash); - - /* Enable Interrupts */ - __HAL_HASH_ENABLE_IT(HASH_IT_DINI | HASH_IT_DCI); - - /* Return function status */ - return HAL_OK; - } - else - { - return HAL_BUSY; - } - -} - - - -/** - * @brief Initialize the HASH peripheral in HMAC mode then initiate the required - * DMA transfers to feed the key and the input buffer to the Peripheral. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note In case of multi-buffer HMAC processing, the input buffer size (in bytes) must - * be a multiple of 4 otherwise, the HASH digest computation is corrupted. - * Only the length of the last buffer of the thread doesn't have to be a - * multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param Algorithm HASH algorithm. - * @retval HAL status - */ -HAL_StatusTypeDef HMAC_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm) -{ - uint32_t inputaddr; - uint32_t inputSize; - HAL_StatusTypeDef status ; - HAL_HASH_StateTypeDef State_tmp = hhash->State; - /* Make sure the input buffer size (in bytes) is a multiple of 4 when digest calculation - is disabled (multi-buffer HMAC processing, MDMAT bit to be set) */ - assert_param(IS_HMAC_DMA_MULTIBUFFER_SIZE(hhash, Size)); - /* If State is ready or suspended, start or resume DMA-based HASH processing */ - if ((State_tmp == HAL_HASH_STATE_READY) || (State_tmp == HAL_HASH_STATE_SUSPENDED)) - { - /* Check input parameters */ - if ((pInBuffer == NULL) || (Size == 0U) || (hhash->Init.pKey == NULL) || (hhash->Init.KeySize == 0U) || - /* Check phase coherency. Phase must be - either READY (fresh start) - or one of HMAC PROCESS steps (multi-buffer HASH management) */ - ((hhash->Phase != HAL_HASH_PHASE_READY) && (!(IS_HMAC_PROCESSING(hhash))))) - { - hhash->State = HAL_HASH_STATE_READY; - return HAL_ERROR; - } - - - /* Process Locked */ - __HAL_LOCK(hhash); - - /* If not a case of resumption after suspension */ - if (hhash->State == HAL_HASH_STATE_READY) - { - /* Check whether or not initialization phase has already be performed */ - if (hhash->Phase == HAL_HASH_PHASE_READY) - { - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; -#if defined(HASH_CR_MDMAT) - /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits. - At the same time, ensure MDMAT bit is cleared. */ - if (hhash->Init.KeySize > 64U) - { - MODIFY_REG(HASH->CR, HASH_CR_MDMAT | HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT); - } - else - { - MODIFY_REG(HASH->CR, HASH_CR_MDMAT | HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT); - } -#else - /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits */ - if (hhash->Init.KeySize > 64U) - { - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT); - } - else - { - MODIFY_REG(HASH->CR, HASH_CR_LKEY | HASH_CR_ALGO | HASH_CR_MODE | HASH_CR_INIT, - Algorithm | HASH_ALGOMODE_HMAC | HASH_CR_INIT); - } -#endif /* HASH_CR_MDMAT*/ - /* Store input aparameters in handle fields to manage steps transition - or possible HMAC suspension/resumption */ - hhash->HashInCount = hhash->Init.KeySize; /* Initial size for first DMA transfer (key size) */ - hhash->pHashKeyBuffPtr = hhash->Init.pKey; /* Key address */ - hhash->pHashInBuffPtr = hhash->Init.pKey ; /* First address passed to DMA (key address at Step 1) */ - hhash->pHashMsgBuffPtr = pInBuffer; /* Input data address */ - hhash->HashBuffSize = Size; /* input data size (in bytes) */ - - /* Set DMA input parameters */ - inputaddr = (uint32_t)(hhash->Init.pKey); /* Address passed to DMA (start by entering Key message) */ - inputSize = hhash->Init.KeySize; /* Size for first DMA transfer (in bytes) */ - - /* Configure the number of valid bits in last word of the key */ - __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize); - - /* Set the phase to Step 1 */ - hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1; - - } - else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2) - { - /* Process a new input data message in case of multi-buffer HMAC processing - (this is not a resumption case) */ - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Save input parameters to be able to manage possible suspension/resumption */ - hhash->HashInCount = Size; /* Input message address */ - hhash->pHashInBuffPtr = pInBuffer; /* Input message size in bytes */ - - /* Set DMA input parameters */ - inputaddr = (uint32_t)pInBuffer; /* Input message address */ - inputSize = Size; /* Input message size in bytes */ - - if (hhash->DigestCalculationDisable == RESET) - { - /* This means this is the last buffer of the multi-buffer sequence: DCAL needs to be set. */ -#if defined(HASH_CR_MDMAT) - __HAL_HASH_RESET_MDMAT(); -#endif /* HASH_CR_MDMAT*/ - __HAL_HASH_SET_NBVALIDBITS(inputSize); - } - } - else - { - /* Phase not aligned with handle READY state */ - __HAL_UNLOCK(hhash); - /* Return function status */ - return HAL_ERROR; - } - } - else - { - /* Resumption case (phase may be Step 1, 2 or 3) */ - - /* Change the HASH state */ - hhash->State = HAL_HASH_STATE_BUSY; - - /* Set DMA input parameters at resumption location; - inputaddr and inputSize are not set to the API input parameters - but to those saved beforehand by HAL_HASH_DMAFeed_ProcessSuspend() when the - processing was suspended. */ - inputaddr = (uint32_t)(hhash->pHashInBuffPtr); /* Input message address */ - inputSize = hhash->HashInCount; /* Input message size in bytes */ - } - - - /* Set the HASH DMA transfer complete callback */ - hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt; - /* Set the DMA error callback */ - hhash->hdmain->XferErrorCallback = HASH_DMAError; - - /* Store number of words already pushed to manage proper DMA processing suspension */ - hhash->NbWordsAlreadyPushed = HASH_NBW_PUSHED(); - - /* Enable the DMA In DMA stream */ - status = HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, \ - (((inputSize % 4U) != 0U) ? ((inputSize + (4U - (inputSize % 4U))) / 4U) \ - : (inputSize / 4U))); - - /* Enable DMA requests */ - SET_BIT(HASH->CR, HASH_CR_DMAE); - - /* Process Unlocked */ - __HAL_UNLOCK(hhash); - - /* Return function status */ - if (status != HAL_OK) - { - /* Update HASH state machine to error */ - hhash->State = HAL_HASH_STATE_ERROR; - } - - /* Return function status */ - return status; - } - else - { - return HAL_BUSY; - } -} -/** - * @} - */ - -#endif /* HAL_HASH_MODULE_ENABLED */ - -/** - * @} - */ -#endif /* HASH*/ -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c deleted file mode 100644 index 63cb38e..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c +++ /dev/null @@ -1,1040 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hash_ex.c - * @author MCD Application Team - * @brief Extended HASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the HASH peripheral for SHA-224 and SHA-256 - * algorithms: - * + HASH or HMAC processing in polling mode - * + HASH or HMAC processing in interrupt mode - * + HASH or HMAC processing in DMA mode - * Additionally, this file provides functions to manage HMAC - * multi-buffer DMA-based processing for MD-5, SHA-1, SHA-224 - * and SHA-256. - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### HASH peripheral extended features ##### - =============================================================================== - [..] - The SHA-224 and SHA-256 HASH and HMAC processing can be carried out exactly - the same way as for SHA-1 or MD-5 algorithms. - (#) Three modes are available. - (##) Polling mode: processing APIs are blocking functions - i.e. they process the data and wait till the digest computation is finished, - e.g. HAL_HASHEx_xxx_Start() - (##) Interrupt mode: processing APIs are not blocking functions - i.e. they process the data under interrupt, - e.g. HAL_HASHEx_xxx_Start_IT() - (##) DMA mode: processing APIs are not blocking functions and the CPU is - not used for data transfer i.e. the data transfer is ensured by DMA, - e.g. HAL_HASHEx_xxx_Start_DMA(). Note that in DMA mode, a call to - HAL_HASHEx_xxx_Finish() is then required to retrieve the digest. - - (#)Multi-buffer processing is possible in polling, interrupt and DMA modes. - (##) In polling mode, only multi-buffer HASH processing is possible. - API HAL_HASHEx_xxx_Accumulate() must be called for each input buffer, except for the last one. - User must resort to HAL_HASHEx_xxx_Accumulate_End() to enter the last one and retrieve as - well the computed digest. - - (##) In interrupt mode, API HAL_HASHEx_xxx_Accumulate_IT() must be called for each input buffer, - except for the last one. - User must resort to HAL_HASHEx_xxx_Accumulate_End_IT() to enter the last one and retrieve as - well the computed digest. - - (##) In DMA mode, multi-buffer HASH and HMAC processing are possible. - - (+++) HASH processing: once initialization is done, MDMAT bit must be set through - __HAL_HASH_SET_MDMAT() macro. - From that point, each buffer can be fed to the Peripheral through HAL_HASHEx_xxx_Start_DMA() API. - Before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT() - macro then wrap-up the HASH processing in feeding the last input buffer through the - same API HAL_HASHEx_xxx_Start_DMA(). The digest can then be retrieved with a call to - API HAL_HASHEx_xxx_Finish(). - - (+++) HMAC processing (MD-5, SHA-1, SHA-224 and SHA-256 must all resort to - extended functions): after initialization, the key and the first input buffer are entered - in the Peripheral with the API HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and - starts step 2. - The following buffers are next entered with the API HAL_HMACEx_xxx_Step2_DMA(). At this - point, the HMAC processing is still carrying out step 2. - Then, step 2 for the last input buffer and step 3 are carried out by a single call - to HAL_HMACEx_xxx_Step2_3_DMA(). - - The digest can finally be retrieved with a call to API HAL_HASH_xxx_Finish() for - MD-5 and SHA-1, to HAL_HASHEx_xxx_Finish() for SHA-224 and SHA-256. - - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - - - - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined (HASH) - -/** @defgroup HASHEx HASHEx - * @brief HASH HAL extended module driver. - * @{ - */ -#ifdef HAL_HASH_MODULE_ENABLED -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -#if defined (HASH_CR_MDMAT) - -/** @defgroup HASHEx_Exported_Functions HASH Extended Exported Functions - * @{ - */ - -/** @defgroup HASHEx_Exported_Functions_Group1 HASH extended processing functions in polling mode - * @brief HASH extended processing functions using polling mode. - * -@verbatim - =============================================================================== - ##### Polling mode HASH extended processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in polling mode - the hash value using one of the following algorithms: - (+) SHA224 - (++) HAL_HASHEx_SHA224_Start() - (++) HAL_HASHEx_SHA224_Accmlt() - (++) HAL_HASHEx_SHA224_Accmlt_End() - (+) SHA256 - (++) HAL_HASHEx_SHA256_Start() - (++) HAL_HASHEx_SHA256_Accmlt() - (++) HAL_HASHEx_SHA256_Accmlt_End() - - [..] For a single buffer to be hashed, user can resort to HAL_HASH_xxx_Start(). - - [..] In case of multi-buffer HASH processing (a single digest is computed while - several buffers are fed to the Peripheral), the user can resort to successive calls - to HAL_HASHEx_xxx_Accumulate() and wrap-up the digest computation by a call - to HAL_HASHEx_xxx_Accumulate_End(). - -@endverbatim - * @{ - */ - - -/** - * @brief Initialize the HASH peripheral in SHA224 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief If not already done, initialize the HASH peripheral in SHA224 mode then - * processes pInBuffer. - * @note Consecutive calls to HAL_HASHEx_SHA224_Accmlt() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASHEx_SHA224_Accmlt_End(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note Digest is not retrieved by this API, user must resort to HAL_HASHEx_SHA224_Accmlt_End() - * to read it, feeding at the same time the last input buffer to the Peripheral. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASHEx_SHA224_Accmlt_End() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA224_Accmlt() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief Initialize the HASH peripheral in SHA256 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief If not already done, initialize the HASH peripheral in SHA256 mode then - * processes pInBuffer. - * @note Consecutive calls to HAL_HASHEx_SHA256_Accmlt() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASHEx_SHA256_Accmlt_End(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note Digest is not retrieved by this API, user must resort to HAL_HASHEx_SHA256_Accmlt_End() - * to read it, feeding at the same time the last input buffer to the Peripheral. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASHEx_SHA256_Accmlt_End() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA256_Accmlt() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @param Timeout Timeout value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256); -} - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group2 HASH extended processing functions in interrupt mode - * @brief HASH extended processing functions using interrupt mode. - * -@verbatim - =============================================================================== - ##### Interruption mode HASH extended processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in interrupt mode - the hash value using one of the following algorithms: - (+) SHA224 - (++) HAL_HASHEx_SHA224_Start_IT() - (++) HAL_HASHEx_SHA224_Accmlt_IT() - (++) HAL_HASHEx_SHA224_Accmlt_End_IT() - (+) SHA256 - (++) HAL_HASHEx_SHA256_Start_IT() - (++) HAL_HASHEx_SHA256_Accmlt_IT() - (++) HAL_HASHEx_SHA256_Accmlt_End_IT() - -@endverbatim - * @{ - */ - - -/** - * @brief Initialize the HASH peripheral in SHA224 mode, next process pInBuffer then - * read the computed digest in interruption mode. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief If not already done, initialize the HASH peripheral in SHA224 mode then - * processes pInBuffer in interruption mode. - * @note Consecutive calls to HAL_HASHEx_SHA224_Accmlt_IT() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASHEx_SHA224_Accmlt_End_IT(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASHEx_SHA224_Accmlt_End_IT() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate_IT(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA224_Accmlt_IT() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief Initialize the HASH peripheral in SHA256 mode, next process pInBuffer then - * read the computed digest in interruption mode. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief If not already done, initialize the HASH peripheral in SHA256 mode then - * processes pInBuffer in interruption mode. - * @note Consecutive calls to HAL_HASHEx_SHA256_Accmlt_IT() can be used to feed - * several input buffers back-to-back to the Peripheral that will yield a single - * HASH signature once all buffers have been entered. Wrap-up of input - * buffers feeding and retrieval of digest is done by a call to - * HAL_HASHEx_SHA256_Accmlt_End_IT(). - * @note Field hhash->Phase of HASH handle is tested to check whether or not - * the Peripheral has already been initialized. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. Only HAL_HASHEx_SHA256_Accmlt_End_IT() is able - * to manage the ending buffer with a length in bytes not a multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes, must be a multiple of 4. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Accumulate_IT(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief End computation of a single HASH signature after several calls to HAL_HASHEx_SHA256_Accmlt_IT() API. - * @note Digest is available in pOutBuffer. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA256); -} - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group3 HASH extended processing functions in DMA mode - * @brief HASH extended processing functions using DMA mode. - * -@verbatim - =============================================================================== - ##### DMA mode HASH extended processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in DMA mode - the hash value using one of the following algorithms: - (+) SHA224 - (++) HAL_HASHEx_SHA224_Start_DMA() - (++) HAL_HASHEx_SHA224_Finish() - (+) SHA256 - (++) HAL_HASHEx_SHA256_Start_DMA() - (++) HAL_HASHEx_SHA256_Finish() - - [..] When resorting to DMA mode to enter the data in the Peripheral, user must resort - to HAL_HASHEx_xxx_Start_DMA() then read the resulting digest with - HAL_HASHEx_xxx_Finish(). - - [..] In case of multi-buffer HASH processing, MDMAT bit must first be set before - the successive calls to HAL_HASHEx_xxx_Start_DMA(). Then, MDMAT bit needs to be - reset before the last call to HAL_HASHEx_xxx_Start_DMA(). Digest is finally - retrieved thanks to HAL_HASHEx_xxx_Finish(). - -@endverbatim - * @{ - */ - - - - -/** - * @brief Initialize the HASH peripheral in SHA224 mode then initiate a DMA transfer - * to feed the input buffer to the Peripheral. - * @note Once the DMA transfer is finished, HAL_HASHEx_SHA224_Finish() API must - * be called to retrieve the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief Return the computed digest in SHA224 mode. - * @note The API waits for DCIS to be set then reads the computed digest. - * @note HAL_HASHEx_SHA224_Finish() can be used as well to retrieve the digest in - * HMAC SHA224 mode. - * @param hhash HASH handle. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Finish(hhash, pOutBuffer, Timeout); -} - -/** - * @brief Initialize the HASH peripheral in SHA256 mode then initiate a DMA transfer - * to feed the input buffer to the Peripheral. - * @note Once the DMA transfer is finished, HAL_HASHEx_SHA256_Finish() API must - * be called to retrieve the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief Return the computed digest in SHA256 mode. - * @note The API waits for DCIS to be set then reads the computed digest. - * @note HAL_HASHEx_SHA256_Finish() can be used as well to retrieve the digest in - * HMAC SHA256 mode. - * @param hhash HASH handle. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HASH_Finish(hhash, pOutBuffer, Timeout); -} - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group4 HMAC extended processing functions in polling mode - * @brief HMAC extended processing functions using polling mode. - * -@verbatim - =============================================================================== - ##### Polling mode HMAC extended processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in polling mode - the HMAC value using one of the following algorithms: - (+) SHA224 - (++) HAL_HMACEx_SHA224_Start() - (+) SHA256 - (++) HAL_HMACEx_SHA256_Start() - -@endverbatim - * @{ - */ - - - -/** - * @brief Initialize the HASH peripheral in HMAC SHA224 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief Initialize the HASH peripheral in HMAC SHA256 mode, next process pInBuffer then - * read the computed digest. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @param Timeout Timeout value. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer, uint32_t Timeout) -{ - return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256); -} - -/** - * @} - */ - - -/** @defgroup HASHEx_Exported_Functions_Group5 HMAC extended processing functions in interrupt mode - * @brief HMAC extended processing functions using interruption mode. - * -@verbatim - =============================================================================== - ##### Interrupt mode HMAC extended processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in interrupt mode - the HMAC value using one of the following algorithms: - (+) SHA224 - (++) HAL_HMACEx_SHA224_Start_IT() - (+) SHA256 - (++) HAL_HMACEx_SHA256_Start_IT() - -@endverbatim - * @{ - */ - - - -/** - * @brief Initialize the HASH peripheral in HMAC SHA224 mode, next process pInBuffer then - * read the computed digest in interrupt mode. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 28 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief Initialize the HASH peripheral in HMAC SHA256 mode, next process pInBuffer then - * read the computed digest in interrupt mode. - * @note Digest is available in pOutBuffer. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @param pOutBuffer pointer to the computed digest. Digest size is 32 bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, - uint8_t *pOutBuffer) -{ - return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA256); -} - - - - -/** - * @} - */ - - -/** @defgroup HASHEx_Exported_Functions_Group6 HMAC extended processing functions in DMA mode - * @brief HMAC extended processing functions using DMA mode. - * -@verbatim - =============================================================================== - ##### DMA mode HMAC extended processing functions ##### - =============================================================================== - [..] This section provides functions allowing to calculate in DMA mode - the HMAC value using one of the following algorithms: - (+) SHA224 - (++) HAL_HMACEx_SHA224_Start_DMA() - (+) SHA256 - (++) HAL_HMACEx_SHA256_Start_DMA() - - [..] When resorting to DMA mode to enter the data in the Peripheral for HMAC processing, - user must resort to HAL_HMACEx_xxx_Start_DMA() then read the resulting digest - with HAL_HASHEx_xxx_Finish(). - - -@endverbatim - * @{ - */ - - - -/** - * @brief Initialize the HASH peripheral in HMAC SHA224 mode then initiate the required - * DMA transfers to feed the key and the input buffer to the Peripheral. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA224_Finish() API must be called to retrieve - * the computed digest. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note If MDMAT bit is set before calling this function (multi-buffer - * HASH processing case), the input buffer size (in bytes) must be - * a multiple of 4 otherwise, the HASH digest computation is corrupted. - * For the processing of the last buffer of the thread, MDMAT bit must - * be reset and the buffer length (in bytes) doesn't have to be a - * multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief Initialize the HASH peripheral in HMAC SHA224 mode then initiate the required - * DMA transfers to feed the key and the input buffer to the Peripheral. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve - * the computed digest. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note If MDMAT bit is set before calling this function (multi-buffer - * HASH processing case), the input buffer size (in bytes) must be - * a multiple of 4 otherwise, the HASH digest computation is corrupted. - * For the processing of the last buffer of the thread, MDMAT bit must - * be reset and the buffer length (in bytes) doesn't have to be a - * multiple of 4. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (buffer to be hashed). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group7 Multi-buffer HMAC extended processing functions in DMA mode - * @brief HMAC extended processing functions in multi-buffer DMA mode. - * -@verbatim - =============================================================================== - ##### Multi-buffer DMA mode HMAC extended processing functions ##### - =============================================================================== - [..] This section provides functions to manage HMAC multi-buffer - DMA-based processing for MD5, SHA1, SHA224 and SHA256 algorithms. - (+) MD5 - (++) HAL_HMACEx_MD5_Step1_2_DMA() - (++) HAL_HMACEx_MD5_Step2_DMA() - (++) HAL_HMACEx_MD5_Step2_3_DMA() - (+) SHA1 - (++) HAL_HMACEx_SHA1_Step1_2_DMA() - (++) HAL_HMACEx_SHA1_Step2_DMA() - (++) HAL_HMACEx_SHA1_Step2_3_DMA() - - (+) SHA256 - (++) HAL_HMACEx_SHA224_Step1_2_DMA() - (++) HAL_HMACEx_SHA224_Step2_DMA() - (++) HAL_HMACEx_SHA224_Step2_3_DMA() - (+) SHA256 - (++) HAL_HMACEx_SHA256_Step1_2_DMA() - (++) HAL_HMACEx_SHA256_Step2_DMA() - (++) HAL_HMACEx_SHA256_Step2_3_DMA() - - [..] User must first start-up the multi-buffer DMA-based HMAC computation in - calling HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and - intiates step 2 with the first input buffer. - - [..] The following buffers are next fed to the Peripheral with a call to the API - HAL_HMACEx_xxx_Step2_DMA(). There may be several consecutive calls - to this API. - - [..] Multi-buffer DMA-based HMAC computation is wrapped up by a call to - HAL_HMACEx_xxx_Step2_3_DMA(). This finishes step 2 in feeding the last input - buffer to the Peripheral then carries out step 3. - - [..] Digest is retrieved by a call to HAL_HASH_xxx_Finish() for MD-5 or - SHA-1, to HAL_HASHEx_xxx_Finish() for SHA-224 or SHA-256. - - [..] If only two buffers need to be consecutively processed, a call to - HAL_HMACEx_xxx_Step1_2_DMA() followed by a call to HAL_HMACEx_xxx_Step2_3_DMA() - is sufficient. - -@endverbatim - * @{ - */ - -/** - * @brief MD5 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. - * @note Step 1 consists in writing the inner hash function key in the Peripheral, - * step 2 consists in writing the message text. - * @note The API carries out the HMAC step 1 then starts step 2 with - * the first buffer entered to the Peripheral. DCAL bit is not automatically set after - * the message buffer feeding, allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_MD5_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = SET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief MD5 HMAC step 2 in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral. - * @note The API carries on the HMAC step 2, applied to the buffer entered as input - * parameter. DCAL bit is not automatically set after the message buffer feeding, - * allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - if (hhash->DigestCalculationDisable != SET) - { - return HAL_ERROR; - } - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - -/** - * @brief MD5 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral, - * step 3 consists in writing the outer hash function key. - * @note The API wraps up the HMAC step 2 in processing the buffer entered as input - * parameter (the input buffer must be the last one of the multi-buffer thread) - * then carries out HMAC step 3. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve - * the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = RESET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5); -} - - -/** - * @brief SHA1 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. - * @note Step 1 consists in writing the inner hash function key in the Peripheral, - * step 2 consists in writing the message text. - * @note The API carries out the HMAC step 1 then starts step 2 with - * the first buffer entered to the Peripheral. DCAL bit is not automatically set after - * the message buffer feeding, allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA1_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = SET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief SHA1 HMAC step 2 in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral. - * @note The API carries on the HMAC step 2, applied to the buffer entered as input - * parameter. DCAL bit is not automatically set after the message buffer feeding, - * allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - if (hhash->DigestCalculationDisable != SET) - { - return HAL_ERROR; - } - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief SHA1 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral, - * step 3 consists in writing the outer hash function key. - * @note The API wraps up the HMAC step 2 in processing the buffer entered as input - * parameter (the input buffer must be the last one of the multi-buffer thread) - * then carries out HMAC step 3. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve - * the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = RESET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1); -} - -/** - * @brief SHA224 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. - * @note Step 1 consists in writing the inner hash function key in the Peripheral, - * step 2 consists in writing the message text. - * @note The API carries out the HMAC step 1 then starts step 2 with - * the first buffer entered to the Peripheral. DCAL bit is not automatically set after - * the message buffer feeding, allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = SET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief SHA224 HMAC step 2 in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral. - * @note The API carries on the HMAC step 2, applied to the buffer entered as input - * parameter. DCAL bit is not automatically set after the message buffer feeding, - * allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - if (hhash->DigestCalculationDisable != SET) - { - return HAL_ERROR; - } - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief SHA224 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral, - * step 3 consists in writing the outer hash function key. - * @note The API wraps up the HMAC step 2 in processing the buffer entered as input - * parameter (the input buffer must be the last one of the multi-buffer thread) - * then carries out HMAC step 3. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve - * the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = RESET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224); -} - -/** - * @brief SHA256 HMAC step 1 completion and step 2 start in multi-buffer DMA mode. - * @note Step 1 consists in writing the inner hash function key in the Peripheral, - * step 2 consists in writing the message text. - * @note The API carries out the HMAC step 1 then starts step 2 with - * the first buffer entered to the Peripheral. DCAL bit is not automatically set after - * the message buffer feeding, allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA256_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = SET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief SHA256 HMAC step 2 in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral. - * @note The API carries on the HMAC step 2, applied to the buffer entered as input - * parameter. DCAL bit is not automatically set after the message buffer feeding, - * allowing other messages DMA transfers to occur. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the - * HASH digest computation is corrupted. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - if (hhash->DigestCalculationDisable != SET) - { - return HAL_ERROR; - } - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - -/** - * @brief SHA256 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode. - * @note Step 2 consists in writing the message text in the Peripheral, - * step 3 consists in writing the outer hash function key. - * @note The API wraps up the HMAC step 2 in processing the buffer entered as input - * parameter (the input buffer must be the last one of the multi-buffer thread) - * then carries out HMAC step 3. - * @note Same key is used for the inner and the outer hash functions; pointer to key and - * key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize. - * @note Once the DMA transfers are finished (indicated by hhash->State set back - * to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve - * the computed digest. - * @param hhash HASH handle. - * @param pInBuffer pointer to the input buffer (message buffer). - * @param Size length of the input buffer in bytes. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size) -{ - hhash->DigestCalculationDisable = RESET; - return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256); -} - -/** - * @} - */ - -#endif /* MDMA defined*/ -/** - * @} - */ -#endif /* HAL_HASH_MODULE_ENABLED */ - -/** - * @} - */ -#endif /* HASH*/ -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c deleted file mode 100644 index 64aabaa..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c +++ /dev/null @@ -1,182 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c_ex.c - * @author MCD Application Team - * @brief I2C Extension HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2C extension peripheral: - * + Extension features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### I2C peripheral extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/ - 429xx/439xx devices contains the following additional features : - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure Noise Filter - (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config() - (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config() - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2CEx I2CEx - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Functions I2C Exported Functions - * @{ - */ - - -/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions - * @brief Extension features functions - * -@verbatim - =============================================================================== - ##### Extension features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - -@endverbatim - * @{ - */ - -/** - * @brief Configures I2C Analog noise filter. - * @param hi2c pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param AnalogFilter new state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Reset I2Cx ANOFF bit */ - hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF); - - /* Disable the analog filter */ - hi2c->Instance->FLTR |= AnalogFilter; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configures I2C Digital noise filter. - * @param hi2c pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get the old register value */ - tmpreg = hi2c->Instance->FLTR; - - /* Reset I2Cx DNF bit [3:0] */ - tmpreg &= ~(I2C_FLTR_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= DigitalFilter; - - /* Store the new register value */ - hi2c->Instance->FLTR = tmpreg; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @} - */ - -/** - * @} - */ -#endif - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c deleted file mode 100644 index 643bf74..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c +++ /dev/null @@ -1,1135 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s_ex.c - * @author MCD Application Team - * @brief I2S HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2S extension peripheral: - * + Extension features Functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### I2S Extension features ##### - ============================================================================== - [..] - (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving - data simultaneously using two data lines. Each SPI peripheral has an extended block - called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3). - (#) The extension block is not a full SPI IP, it is used only as I2S slave to - implement full duplex mode. The extension block uses the same clock sources - as its master. - - (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers. - - [..] - (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where - I2Sx can be I2S2 or I2S3. - - ##### How to use this driver ##### - =============================================================================== - [..] - Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2SEx_TransmitReceive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2SEx_TransmitReceive_IT() - (+) At transmission/reception end of transfer HAL_I2SEx_TxRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2SEx_TxRxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2SEx_TransmitReceive_DMA() - (+) At transmission/reception end of transfer HAL_I2SEx_TxRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxRxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - (+) __HAL_I2SEXT_FLUSH_RX_DR: In Full-Duplex Slave mode, if HAL_I2S_DMAStop is used to stop the - communication, an error HAL_I2S_ERROR_BUSY_LINE_RX is raised as the master continue to transmit data. - In this case __HAL_I2SEXT_FLUSH_RX_DR macro must be used to flush the remaining data - inside I2Sx and I2Sx_ext DR registers and avoid using DeInit/Init process for the next transfer. - @endverbatim - - Additional Figure: The Extended block uses the same clock sources as its master. - - +-----------------------+ - I2Sx_SCK | | - ----------+-->| I2Sx |------------------->I2Sx_SD(in/out) - +--|-->| | - | | +-----------------------+ - | | - I2S_WS | | - ------>| | - | | +-----------------------+ - | +-->| | - | | I2Sx_ext |------------------->I2Sx_extSD(in/out) - +----->| | - +-----------------------+ - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_I2S_MODULE_ENABLED - -/** @defgroup I2SEx I2SEx - * @brief I2S Extended HAL module driver - * @{ - */ - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - -/* Private typedef -----------------------------------------------------------*/ -/** @defgroup I2SEx_Private_Typedef I2S Extended Private Typedef - * @{ - */ -typedef enum -{ - I2S_USE_I2S = 0x00U, /*!< I2Sx should be used */ - I2S_USE_I2SEXT = 0x01U, /*!< I2Sx_ext should be used */ -} I2S_UseTypeDef; -/** - * @} - */ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup I2SEx_Private_Functions I2S Extended Private Functions - * @{ - */ -static void I2SEx_TxRxDMAHalfCplt(DMA_HandleTypeDef *hdma); -static void I2SEx_TxRxDMACplt(DMA_HandleTypeDef *hdma); -static void I2SEx_TxRxDMAError(DMA_HandleTypeDef *hdma); -static void I2SEx_RxISR_I2S(I2S_HandleTypeDef *hi2s); -static void I2SEx_RxISR_I2SExt(I2S_HandleTypeDef *hi2s); -static void I2SEx_TxISR_I2S(I2S_HandleTypeDef *hi2s); -static void I2SEx_TxISR_I2SExt(I2S_HandleTypeDef *hi2s); -static HAL_StatusTypeDef I2SEx_FullDuplexWaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, - uint32_t Flag, - uint32_t State, - uint32_t Timeout, - I2S_UseTypeDef i2sUsed); -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup I2SEx I2SEx - * @{ - */ - -/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions - * @{ - */ - -/** @defgroup I2SEx_Exported_Functions_Group1 I2S Extended IO operation functions - * @brief I2SEx IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2S data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2SEx_TransmitReceive() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2SEx_TransmitReceive_IT() - (++) HAL_I2SEx_FullDuplex_IRQHandler() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2SEx_TransmitReceive_DMA() - - (#) A set of Transfer Complete Callback are provided in non Blocking mode: - (++) HAL_I2SEx_TxRxCpltCallback() -@endverbatim - * @{ - */ -/** - * @brief Full-Duplex Transmit/Receive data in blocking mode. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pTxData a 16-bit pointer to the Transmit data buffer. - * @param pRxData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @param Timeout Timeout duration - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, - uint16_t *pTxData, - uint16_t *pRxData, - uint16_t Size, - uint32_t Timeout) -{ - uint32_t tmp1 = 0U; - HAL_StatusTypeDef errorcode = HAL_OK; - - if (hi2s->State != HAL_I2S_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended - is selected during the I2S configuration phase, the Size parameter means the number - of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data - frame is selected the Size parameter means the number of 16-bit data length. */ - if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Set state and reset error code */ - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; - - tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; - /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ - if ((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX)) - { - /* Prepare the First Data before enabling the I2S */ - hi2s->Instance->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2Sx peripheral */ - __HAL_I2S_ENABLE(hi2s); - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2SEXT_CLEAR_OVRFLAG(hi2s); - } - - while ((hi2s->RxXferCount > 0U) || (hi2s->TxXferCount > 0U)) - { - if (hi2s->TxXferCount > 0U) - { - /* Wait until TXE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout, I2S_USE_I2S) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Write Data on DR register */ - hi2s->Instance->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Check if an underrun occurs */ - if ((__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) && (tmp1 == I2S_MODE_SLAVE_TX)) - { - /* Clear Underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - } - if (hi2s->RxXferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout, I2S_USE_I2SEXT) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Read Data from DR register */ - (*pRxData++) = I2SxEXT(hi2s->Instance)->DR; - hi2s->RxXferCount--; - - /* Check if an overrun occurs */ - if (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) - { - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - } - } - } - /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ - else - { - /* Prepare the First Data before enabling the I2S */ - I2SxEXT(hi2s->Instance)->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2S peripheral before the I2Sext*/ - __HAL_I2S_ENABLE(hi2s); - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - - while ((hi2s->RxXferCount > 0U) || (hi2s->TxXferCount > 0U)) - { - if (hi2s->TxXferCount > 0U) - { - /* Wait until TXE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout, I2S_USE_I2SEXT) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Write Data on DR register */ - I2SxEXT(hi2s->Instance)->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Check if an underrun occurs */ - if ((__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) && (tmp1 == I2S_MODE_SLAVE_RX)) - { - /* Clear Underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - } - if (hi2s->RxXferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout, I2S_USE_I2S) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Read Data from DR register */ - (*pRxData++) = hi2s->Instance->DR; - hi2s->RxXferCount--; - - /* Check if an overrun occurs */ - if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) - { - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - } - } - } - - if (hi2s->ErrorCode != HAL_I2S_ERROR_NONE) - { - errorcode = HAL_ERROR; - } - -error : - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return errorcode; -} - -/** - * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pTxData a 16-bit pointer to the Transmit data buffer. - * @param pRxData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, - uint16_t *pTxData, - uint16_t *pRxData, - uint16_t Size) -{ - uint32_t tmp1 = 0U; - HAL_StatusTypeDef errorcode = HAL_OK; - - if (hi2s->State != HAL_I2S_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - hi2s->pTxBuffPtr = pTxData; - hi2s->pRxBuffPtr = pRxData; - - tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended - is selected during the I2S configuration phase, the Size parameter means the number - of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data - frame is selected the Size parameter means the number of 16-bit data length. */ - if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; - - /* Set the function for IT treatment */ - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - /* Enable I2Sext RXNE and ERR interrupts */ - __HAL_I2SEXT_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Enable I2Sx TXE and ERR interrupts */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Transmit First data */ - hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - } - } - else /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ - { - /* Enable I2Sext TXE and ERR interrupts */ - __HAL_I2SEXT_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Enable I2Sext RXNE and ERR interrupts */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Transmit First data */ - I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable I2Sext TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - } - } - - /* Enable I2Sext peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - -error : - __HAL_UNLOCK(hi2s); - return errorcode; -} - -/** - * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pTxData a 16-bit pointer to the Transmit data buffer. - * @param pRxData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, - uint16_t *pTxData, - uint16_t *pRxData, - uint16_t Size) -{ - uint32_t *tmp = NULL; - uint32_t tmp1 = 0U; - HAL_StatusTypeDef errorcode = HAL_OK; - - if (hi2s->State != HAL_I2S_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - hi2s->pTxBuffPtr = pTxData; - hi2s->pRxBuffPtr = pRxData; - - tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended - is selected during the I2S configuration phase, the Size parameter means the number - of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data - frame is selected the Size parameter means the number of 16-bit data length. */ - if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; - - /* Set the I2S Rx DMA Half transfer complete callback */ - hi2s->hdmarx->XferHalfCpltCallback = I2SEx_TxRxDMAHalfCplt; - - /* Set the I2S Rx DMA transfer complete callback */ - hi2s->hdmarx->XferCpltCallback = I2SEx_TxRxDMACplt; - - /* Set the I2S Rx DMA error callback */ - hi2s->hdmarx->XferErrorCallback = I2SEx_TxRxDMAError; - - /* Set the I2S Tx DMA Half transfer complete callback as NULL */ - hi2s->hdmatx->XferHalfCpltCallback = NULL; - - /* Set the I2S Tx DMA transfer complete callback as NULL */ - hi2s->hdmatx->XferCpltCallback = NULL; - - /* Set the I2S Tx DMA error callback */ - hi2s->hdmatx->XferErrorCallback = I2SEx_TxRxDMAError; - - tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; - /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ - if ((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX)) - { - /* Enable the Rx DMA Stream */ - tmp = (uint32_t *)&pRxData; - HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t *)tmp, hi2s->RxXferSize); - - /* Enable Rx DMA Request */ - SET_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN); - - /* Enable the Tx DMA Stream */ - tmp = (uint32_t *)&pTxData; - HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t *)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize); - - /* Enable Tx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2S peripheral after the I2Sext */ - __HAL_I2S_ENABLE(hi2s); - } - } - else - { - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - /* Enable the Tx DMA Stream */ - tmp = (uint32_t *)&pTxData; - HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t *)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize); - - /* Enable Tx DMA Request */ - SET_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN); - - /* Enable the Rx DMA Stream */ - tmp = (uint32_t *)&pRxData; - HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t *)tmp, hi2s->RxXferSize); - - /* Enable Rx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2Sext(transmitter) before enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - /* Enable I2S peripheral before the I2Sext */ - __HAL_I2S_ENABLE(hi2s); - } - } - -error : - __HAL_UNLOCK(hi2s); - return errorcode; -} - -/** - * @brief This function handles I2S/I2Sext interrupt requests in full-duplex mode. - * @param hi2s I2S handle - * @retval HAL status - */ -void HAL_I2SEx_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s) -{ - __IO uint32_t i2ssr = hi2s->Instance->SR; - __IO uint32_t i2sextsr = I2SxEXT(hi2s->Instance)->SR; - __IO uint32_t i2scr2 = hi2s->Instance->CR2; - __IO uint32_t i2sextcr2 = I2SxEXT(hi2s->Instance)->CR2; - - /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - /* I2S in mode Transmitter -------------------------------------------------*/ - if (((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && ((i2scr2 & I2S_IT_TXE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX, - the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */ - I2SEx_TxISR_I2S(hi2s); - } - - /* I2Sext in mode Receiver -----------------------------------------------*/ - if (((i2sextsr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && ((i2sextcr2 & I2S_IT_RXNE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX, - the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */ - I2SEx_RxISR_I2SExt(hi2s); - } - - /* I2Sext Overrun error interrupt occurred --------------------------------*/ - if (((i2sextsr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && ((i2sextcr2 & I2S_IT_ERR) != RESET)) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - - /* I2S Underrun error interrupt occurred ----------------------------------*/ - if (((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && ((i2scr2 & I2S_IT_ERR) != RESET)) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Disable RXNE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Clear underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } - /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ - else - { - /* I2Sext in mode Transmitter ----------------------------------------------*/ - if (((i2sextsr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && ((i2sextcr2 & I2S_IT_TXE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX, - the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */ - I2SEx_TxISR_I2SExt(hi2s); - } - - /* I2S in mode Receiver --------------------------------------------------*/ - if (((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && ((i2scr2 & I2S_IT_RXNE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX, - the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */ - I2SEx_RxISR_I2S(hi2s); - } - - /* I2S Overrun error interrupt occurred -------------------------------------*/ - if (((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && ((i2scr2 & I2S_IT_ERR) != RESET)) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Disable TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - - /* I2Sext Underrun error interrupt occurred -------------------------------*/ - if (((i2sextsr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && ((i2sextcr2 & I2S_IT_ERR) != RESET)) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Tx and Rx Transfer half completed callback - * @param hi2s I2S handle - * @retval None - */ -__weak void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2SEx_TxRxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Transfer completed callback - * @param hi2s I2S handle - * @retval None - */ -__weak void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2SEx_TxRxCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2SEx_Private_Functions I2S Extended Private Functions - * @{ - */ - -/** - * @brief DMA I2S transmit receive process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2SEx_TxRxDMAHalfCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Call user TxRx Half complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxHalfCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxHalfCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S transmit receive process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2SEx_TxRxDMACplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* If DMA is configured in DMA_NORMAL mode */ - if (hdma->Init.Mode == DMA_NORMAL) - { - if (((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || \ - ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX)) - /* Disable Tx & Rx DMA Requests */ - { - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN); - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - else - { - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN); - } - - hi2s->RxXferCount = 0U; - hi2s->TxXferCount = 0U; - - hi2s->State = HAL_I2S_STATE_READY; - } - - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S communication error callback - * @param hdma DMA handle - * @retval None - */ -static void I2SEx_TxRxDMAError(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable Rx and Tx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - - hi2s->TxXferCount = 0U; - hi2s->RxXferCount = 0U; - - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief I2S Full-Duplex IT handler transmit function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_TxISR_I2S(I2S_HandleTypeDef *hi2s) -{ - /* Write Data on DR register */ - hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - if (hi2s->RxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief I2SExt Full-Duplex IT handler transmit function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_TxISR_I2SExt(I2S_HandleTypeDef *hi2s) -{ - /* Write Data on DR register */ - I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable I2Sext TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - if (hi2s->RxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief I2S Full-Duplex IT handler receive function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_RxISR_I2S(I2S_HandleTypeDef *hi2s) -{ - /* Read Data from DR register */ - (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR; - hi2s->RxXferCount--; - - if (hi2s->RxXferCount == 0U) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - if (hi2s->TxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief I2SExt Full-Duplex IT handler receive function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_RxISR_I2SExt(I2S_HandleTypeDef *hi2s) -{ - /* Read Data from DR register */ - (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR; - hi2s->RxXferCount--; - - if (hi2s->RxXferCount == 0U) - { - /* Disable I2Sext RXNE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - if (hi2s->TxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief This function handles I2S Communication Timeout. - * @param hi2s I2S handle - * @param Flag Flag checked - * @param State Value of the flag expected - * @param Timeout Duration of the timeout - * @param i2sUsed I2S instance reference - * @retval HAL status - */ -static HAL_StatusTypeDef I2SEx_FullDuplexWaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, - uint32_t Flag, - uint32_t State, - uint32_t Timeout, - I2S_UseTypeDef i2sUsed) -{ - uint32_t tickstart = HAL_GetTick(); - - if (i2sUsed == I2S_USE_I2S) - { - /* Wait until flag is reset */ - while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_TIMEOUT; - } - } - } - } - else /* i2sUsed == I2S_USE_I2SEXT */ - { - /* Wait until flag is reset */ - while (((__HAL_I2SEXT_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @} - */ -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - -/** - * @} - */ -#endif /* HAL_I2S_MODULE_ENABLED */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_lptim.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_lptim.c deleted file mode 100644 index 7b56951..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_lptim.c +++ /dev/null @@ -1,2484 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_lptim.c - * @author MCD Application Team - * @brief LPTIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Low Power Timer (LPTIM) peripheral: - * + Initialization and de-initialization functions. - * + Start/Stop operation functions in polling mode. - * + Start/Stop operation functions in interrupt mode. - * + Reading operation functions. - * + Peripheral State functions. - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LPTIM HAL driver can be used as follows: - - (#)Initialize the LPTIM low level resources by implementing the - HAL_LPTIM_MspInit(): - (++) Enable the LPTIM interface clock using __HAL_RCC_LPTIMx_CLK_ENABLE(). - (++) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()): - (+++) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority(). - (+++) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ(). - (+++) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler(). - - (#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function - configures mainly: - (++) The instance: LPTIM1. - (++) Clock: the counter clock. - (+++) Source : it can be either the ULPTIM input (IN1) or one of - the internal clock; (APB, LSE or LSI). - (+++) Prescaler: select the clock divider. - (++) UltraLowPowerClock : To be used only if the ULPTIM is selected - as counter clock source. - (+++) Polarity: polarity of the active edge for the counter unit - if the ULPTIM input is selected. - (+++) SampleTime: clock sampling time to configure the clock glitch - filter. - (++) Trigger: How the counter start. - (+++) Source: trigger can be software or one of the hardware triggers. - (+++) ActiveEdge : only for hardware trigger. - (+++) SampleTime : trigger sampling time to configure the trigger - glitch filter. - (++) OutputPolarity : 2 opposite polarities are possible. - (++) UpdateMode: specifies whether the update of the autoreload and - the compare values is done immediately or after the end of current - period. - - (#)Six modes are available: - - (++) PWM Mode: To generate a PWM signal with specified period and pulse, - call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption - mode. - - (++) One Pulse Mode: To generate pulse with specified width in response - to a stimulus, call HAL_LPTIM_OnePulse_Start() or - HAL_LPTIM_OnePulse_Start_IT() for interruption mode. - - (++) Set once Mode: In this mode, the output changes the level (from - low level to high level if the output polarity is configured high, else - the opposite) when a compare match occurs. To start this mode, call - HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for - interruption mode. - - (++) Encoder Mode: To use the encoder interface call - HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for - interruption mode. Only available for LPTIM1 instance. - - (++) Time out Mode: an active edge on one selected trigger input rests - the counter. The first trigger event will start the timer, any - successive trigger event will reset the counter and the timer will - restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or - HAL_LPTIM_TimeOut_Start_IT() for interruption mode. - - (++) Counter Mode: counter can be used to count external events on - the LPTIM Input1 or it can be used to count internal clock cycles. - To start this mode, call HAL_LPTIM_Counter_Start() or - HAL_LPTIM_Counter_Start_IT() for interruption mode. - - - (#) User can stop any process by calling the corresponding API: - HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is - already started in interruption mode. - - (#) De-initialize the LPTIM peripheral using HAL_LPTIM_DeInit(). - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - [..] - Use Function HAL_LPTIM_RegisterCallback() to register a callback. - HAL_LPTIM_RegisterCallback() takes as parameters the HAL peripheral handle, - the Callback ID and a pointer to the user callback function. - [..] - Use function HAL_LPTIM_UnRegisterCallback() to reset a callback to the - default weak function. - HAL_LPTIM_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - [..] - These functions allow to register/unregister following callbacks: - - (+) MspInitCallback : LPTIM Base Msp Init Callback. - (+) MspDeInitCallback : LPTIM Base Msp DeInit Callback. - (+) CompareMatchCallback : Compare match Callback. - (+) AutoReloadMatchCallback : Auto-reload match Callback. - (+) TriggerCallback : External trigger event detection Callback. - (+) CompareWriteCallback : Compare register write complete Callback. - (+) AutoReloadWriteCallback : Auto-reload register write complete Callback. - (+) DirectionUpCallback : Up-counting direction change Callback. - (+) DirectionDownCallback : Down-counting direction change Callback. - - [..] - By default, after the Init and when the state is HAL_LPTIM_STATE_RESET - all interrupt callbacks are set to the corresponding weak functions: - examples HAL_LPTIM_TriggerCallback(), HAL_LPTIM_CompareMatchCallback(). - - [..] - Exception done for MspInit and MspDeInit functions that are reset to the legacy weak - functionalities in the Init/DeInit only when these callbacks are null - (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init/DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) - - [..] - Callbacks can be registered/unregistered in HAL_LPTIM_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_LPTIM_STATE_READY or HAL_LPTIM_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_LPTIM_RegisterCallback() before calling DeInit or Init function. - - [..] - When The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup LPTIM LPTIM - * @brief LPTIM HAL module driver. - * @{ - */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - -#if defined (LPTIM1) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup LPTIM_Private_Constants - * @{ - */ -#define TIMEOUT 1000UL /* Timeout is 1s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ -static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag); - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions - * @{ - */ - -/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions. - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the LPTIM according to the specified parameters in the - LPTIM_InitTypeDef and initialize the associated handle. - (+) DeInitialize the LPTIM peripheral. - (+) Initialize the LPTIM MSP. - (+) DeInitialize the LPTIM MSP. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the LPTIM according to the specified parameters in the - * LPTIM_InitTypeDef and initialize the associated handle. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) -{ - uint32_t tmpcfgr; - - /* Check the LPTIM handle allocation */ - if (hlptim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source)); - assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler)); - if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) - || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) - { - assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); - assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); - } - assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source)); - if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) - { - assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge)); - assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime)); - } - assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity)); - assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode)); - assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource)); - - if (hlptim->State == HAL_LPTIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hlptim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - LPTIM_ResetCallback(hlptim); - - if (hlptim->MspInitCallback == NULL) - { - hlptim->MspInitCallback = HAL_LPTIM_MspInit; - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - hlptim->MspInitCallback(hlptim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_LPTIM_MspInit(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Get the LPTIMx CFGR value */ - tmpcfgr = hlptim->Instance->CFGR; - - if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) - || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) - { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT)); - } - if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) - { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL)); - } - - /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */ - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD | - LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE)); - - /* Set initialization parameters */ - tmpcfgr |= (hlptim->Init.Clock.Source | - hlptim->Init.Clock.Prescaler | - hlptim->Init.OutputPolarity | - hlptim->Init.UpdateMode | - hlptim->Init.CounterSource); - - /* Glitch filters for internal triggers and external inputs are configured - * only if an internal clock source is provided to the LPTIM - */ - if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) - { - tmpcfgr |= (hlptim->Init.Trigger.SampleTime | - hlptim->Init.UltraLowPowerClock.SampleTime); - } - - /* Configure LPTIM external clock polarity and digital filter */ - if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) - || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) - { - tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity | - hlptim->Init.UltraLowPowerClock.SampleTime); - } - - /* Configure LPTIM external trigger */ - if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Enable External trigger and set the trigger source */ - tmpcfgr |= (hlptim->Init.Trigger.Source | - hlptim->Init.Trigger.ActiveEdge | - hlptim->Init.Trigger.SampleTime); - } - - /* Write to LPTIMx CFGR */ - hlptim->Instance->CFGR = tmpcfgr; - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief DeInitialize the LPTIM peripheral. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the LPTIM handle allocation */ - if (hlptim == NULL) - { - return HAL_ERROR; - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the LPTIM Peripheral Clock */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - if (hlptim->MspDeInitCallback == NULL) - { - hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; - } - - /* DeInit the low level hardware: CLOCK, NVIC.*/ - hlptim->MspDeInitCallback(hlptim); -#else - /* DeInit the low level hardware: CLOCK, NVIC.*/ - HAL_LPTIM_MspDeInit(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hlptim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the LPTIM MSP. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize LPTIM MSP. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions - * @brief Start-Stop operation functions. - * -@verbatim - ============================================================================== - ##### LPTIM Start Stop operation functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Start the PWM mode. - (+) Stop the PWM mode. - (+) Start the One pulse mode. - (+) Stop the One pulse mode. - (+) Start the Set once mode. - (+) Stop the Set once mode. - (+) Start the Encoder mode. - (+) Stop the Encoder mode. - (+) Start the Timeout mode. - (+) Stop the Timeout mode. - (+) Start the Counter mode. - (+) Stop the Counter mode. - - -@endverbatim - * @{ - */ - -/** - * @brief Start the LPTIM PWM generation. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @param Pulse Specifies the compare value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Pulse)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Reset WAVE bit to set PWM mode */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the LPTIM PWM generation. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the LPTIM PWM generation in interrupt mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF - * @param Pulse Specifies the compare value. - * This parameter must be a value between 0x0000 and 0xFFFF - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Pulse)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Reset WAVE bit to set PWM mode */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Enable Autoreload write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Enable Compare write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK); - - /* Enable Autoreload match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Enable Compare match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* If external trigger source is used, then enable external trigger interrupt */ - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Enable external trigger interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); - } - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the LPTIM PWM generation in interrupt mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable Autoreload write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Disable Compare write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK); - - /* Disable Autoreload match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Disable Compare match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* If external trigger source is used, then disable external trigger interrupt */ - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Disable external trigger interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the LPTIM One pulse generation. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @param Pulse Specifies the compare value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Pulse)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Reset WAVE bit to set one pulse mode */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Start timer in single (one shot) mode */ - __HAL_LPTIM_START_SINGLE(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the LPTIM One pulse generation. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the LPTIM One pulse generation in interrupt mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @param Pulse Specifies the compare value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Pulse)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Reset WAVE bit to set one pulse mode */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Enable Autoreload write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Enable Compare write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK); - - /* Enable Autoreload match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Enable Compare match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* If external trigger source is used, then enable external trigger interrupt */ - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Enable external trigger interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); - } - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Start timer in single (one shot) mode */ - __HAL_LPTIM_START_SINGLE(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the LPTIM One pulse generation in interrupt mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable Autoreload write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Disable Compare write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK); - - /* Disable Autoreload match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Disable Compare match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* If external trigger source is used, then disable external trigger interrupt */ - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Disable external trigger interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the LPTIM in Set once mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @param Pulse Specifies the compare value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Pulse)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Set WAVE bit to enable the set once mode */ - hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Start timer in single (one shot) mode */ - __HAL_LPTIM_START_SINGLE(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the LPTIM Set once mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the LPTIM Set once mode in interrupt mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @param Pulse Specifies the compare value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Pulse)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Set WAVE bit to enable the set once mode */ - hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Enable Autoreload write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Enable Compare write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK); - - /* Enable Autoreload match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Enable Compare match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* If external trigger source is used, then enable external trigger interrupt */ - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Enable external trigger interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); - } - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Start timer in single (one shot) mode */ - __HAL_LPTIM_START_SINGLE(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the LPTIM Set once mode in interrupt mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable Autoreload write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Disable Compare write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK); - - /* Disable Autoreload match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Disable Compare match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* If external trigger source is used, then disable external trigger interrupt */ - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) - { - /* Disable external trigger interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the Encoder interface. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period) -{ - uint32_t tmpcfgr; - - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC); - assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1); - assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Get the LPTIMx CFGR value */ - tmpcfgr = hlptim->Instance->CFGR; - - /* Clear CKPOL bits */ - tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL); - - /* Set Input polarity */ - tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity; - - /* Write to LPTIMx CFGR */ - hlptim->Instance->CFGR = tmpcfgr; - - /* Set ENC bit to enable the encoder interface */ - hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the Encoder interface. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Reset ENC bit to disable the encoder interface */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the Encoder interface in interrupt mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period) -{ - uint32_t tmpcfgr; - - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC); - assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1); - assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Configure edge sensitivity for encoder mode */ - /* Get the LPTIMx CFGR value */ - tmpcfgr = hlptim->Instance->CFGR; - - /* Clear CKPOL bits */ - tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL); - - /* Set Input polarity */ - tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity; - - /* Write to LPTIMx CFGR */ - hlptim->Instance->CFGR = tmpcfgr; - - /* Set ENC bit to enable the encoder interface */ - hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Enable "switch to down direction" interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN); - - /* Enable "switch to up direction" interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP); - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the Encoder interface in interrupt mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Reset ENC bit to disable the encoder interface */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; - - /* Disable "switch to down direction" interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_DOWN); - - /* Disable "switch to up direction" interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the Timeout function. - * @note The first trigger event will start the timer, any successive - * trigger event will reset the counter and the timer restarts. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @param Timeout Specifies the TimeOut value to reset the counter. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Timeout)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Set TIMOUT bit to enable the timeout function */ - hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the Timeout value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Timeout); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the Timeout function. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Reset TIMOUT bit to enable the timeout function */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the Timeout function in interrupt mode. - * @note The first trigger event will start the timer, any successive - * trigger event will reset the counter and the timer restarts. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @param Timeout Specifies the TimeOut value to reset the counter. - * This parameter must be a value between 0x0000 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - assert_param(IS_LPTIM_PULSE(Timeout)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(); -#if defined(EXTI_IMR_MR23) - /* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); -#endif /* EXTI_IMR_MR23 */ - - /* Set TIMOUT bit to enable the timeout function */ - hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Load the Timeout value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Timeout); - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Enable Compare match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the Timeout function in interrupt mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - -#if defined(EXTI_IMR_MR23) - /* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); -#endif /* EXTI_IMR_MR23 */ - - /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Reset TIMOUT bit to enable the timeout function */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; - - /* Disable Compare match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the Counter mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ - if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) - && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) - { - /* Check if clock is prescaled */ - assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); - /* Set clock prescaler to 0 */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; - } - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the Counter mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Start the Counter mode in interrupt mode. - * @param hlptim LPTIM handle - * @param Period Specifies the Autoreload value. - * This parameter must be a value between 0x0001 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - assert_param(IS_LPTIM_PERIOD(Period)); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(); -#if defined(EXTI_IMR_MR23) - /* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); -#endif /* EXTI_IMR_MR23 */ - - /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ - if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) - && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) - { - /* Check if clock is prescaled */ - assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); - /* Set clock prescaler to 0 */ - hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; - } - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Clear flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Enable Autoreload write complete interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Enable Autoreload match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); - - /* Enable the Peripheral */ - __HAL_LPTIM_ENABLE(hlptim); - - /* Start timer in continuous mode */ - __HAL_LPTIM_START_CONTINUOUS(hlptim); - - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the Counter mode in interrupt mode. - * @param hlptim LPTIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - -#if defined(EXTI_IMR_MR23) - /* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); -#endif /* EXTI_IMR_MR23 */ - - /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ - __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(); - - /* Set the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_LPTIM_DISABLE(hlptim); - - if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) - { - return HAL_TIMEOUT; - } - - /* Disable Autoreload write complete interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); - - /* Disable Autoreload match interrupt */ - __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); - /* Change the LPTIM state */ - hlptim->State = HAL_LPTIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions - * @brief Read operation functions. - * -@verbatim - ============================================================================== - ##### LPTIM Read operation functions ##### - ============================================================================== -[..] This section provides LPTIM Reading functions. - (+) Read the counter value. - (+) Read the period (Auto-reload) value. - (+) Read the pulse (Compare)value. -@endverbatim - * @{ - */ - -/** - * @brief Return the current counter value. - * @param hlptim LPTIM handle - * @retval Counter value. - */ -uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - return (hlptim->Instance->CNT); -} - -/** - * @brief Return the current Autoreload (Period) value. - * @param hlptim LPTIM handle - * @retval Autoreload value. - */ -uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - return (hlptim->Instance->ARR); -} - -/** - * @brief Return the current Compare (Pulse) value. - * @param hlptim LPTIM handle - * @retval Compare value. - */ -uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim) -{ - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); - - return (hlptim->Instance->CMP); -} - -/** - * @} - */ - -/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler and callbacks - * @brief LPTIM IRQ handler. - * -@verbatim - ============================================================================== - ##### LPTIM IRQ handler and callbacks ##### - ============================================================================== -[..] This section provides LPTIM IRQ handler and callback functions called within - the IRQ handler: - (+) LPTIM interrupt request handler - (+) Compare match Callback - (+) Auto-reload match Callback - (+) External trigger event detection Callback - (+) Compare register write complete Callback - (+) Auto-reload register write complete Callback - (+) Up-counting direction change Callback - (+) Down-counting direction change Callback - -@endverbatim - * @{ - */ - -/** - * @brief Handle LPTIM interrupt request. - * @param hlptim LPTIM handle - * @retval None - */ -void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim) -{ - /* Compare match interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPM) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPM) != RESET) - { - /* Clear Compare match flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPM); - - /* Compare match Callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->CompareMatchCallback(hlptim); -#else - HAL_LPTIM_CompareMatchCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } - - /* Autoreload match interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) != RESET) - { - /* Clear Autoreload match flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM); - - /* Autoreload match Callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->AutoReloadMatchCallback(hlptim); -#else - HAL_LPTIM_AutoReloadMatchCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } - - /* Trigger detected interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) != RESET) - { - /* Clear Trigger detected flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG); - - /* Trigger detected callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->TriggerCallback(hlptim); -#else - HAL_LPTIM_TriggerCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } - - /* Compare write interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPOK) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPOK) != RESET) - { - /* Clear Compare write flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - - /* Compare write Callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->CompareWriteCallback(hlptim); -#else - HAL_LPTIM_CompareWriteCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } - - /* Autoreload write interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) != RESET) - { - /* Clear Autoreload write flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - - /* Autoreload write Callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->AutoReloadWriteCallback(hlptim); -#else - HAL_LPTIM_AutoReloadWriteCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } - - /* Direction counter changed from Down to Up interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) != RESET) - { - /* Clear Direction counter changed from Down to Up flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP); - - /* Direction counter changed from Down to Up Callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->DirectionUpCallback(hlptim); -#else - HAL_LPTIM_DirectionUpCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } - - /* Direction counter changed from Up to Down interrupt */ - if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET) - { - if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) != RESET) - { - /* Clear Direction counter changed from Up to Down flag */ - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN); - - /* Direction counter changed from Up to Down Callback */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) - hlptim->DirectionDownCallback(hlptim); -#else - HAL_LPTIM_DirectionDownCallback(hlptim); -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - } - } -#if defined(EXTI_IMR_MR23) - __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG(); -#endif /* EXTI_IMR_MR23 */ -} - -/** - * @brief Compare match callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_CompareMatchCallback could be implemented in the user file - */ -} - -/** - * @brief Autoreload match callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file - */ -} - -/** - * @brief Trigger detected callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_TriggerCallback could be implemented in the user file - */ -} - -/** - * @brief Compare write callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_CompareWriteCallback could be implemented in the user file - */ -} - -/** - * @brief Autoreload write callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file - */ -} - -/** - * @brief Direction counter changed from Down to Up callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_DirectionUpCallback could be implemented in the user file - */ -} - -/** - * @brief Direction counter changed from Up to Down callback in non-blocking mode. - * @param hlptim LPTIM handle - * @retval None - */ -__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hlptim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LPTIM_DirectionDownCallback could be implemented in the user file - */ -} - -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User LPTIM callback to be used instead of the weak predefined callback - * @param hlptim LPTIM handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_LPTIM_MSPINIT_CB_ID LPTIM Base Msp Init Callback ID - * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID LPTIM Base Msp DeInit Callback ID - * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare match Callback ID - * @arg @ref HAL_LPTIM_AUTORELOAD_MATCH_CB_ID Auto-reload match Callback ID - * @arg @ref HAL_LPTIM_TRIGGER_CB_ID External trigger event detection Callback ID - * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare register write complete Callback ID - * @arg @ref HAL_LPTIM_AUTORELOAD_WRITE_CB_ID Auto-reload register write complete Callback ID - * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Up-counting direction change Callback ID - * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Down-counting direction change Callback ID - * @param pCallback pointer to the callback function - * @retval status - */ -HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *hlptim, - HAL_LPTIM_CallbackIDTypeDef CallbackID, - pLPTIM_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hlptim); - - if (hlptim->State == HAL_LPTIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_LPTIM_MSPINIT_CB_ID : - hlptim->MspInitCallback = pCallback; - break; - - case HAL_LPTIM_MSPDEINIT_CB_ID : - hlptim->MspDeInitCallback = pCallback; - break; - - case HAL_LPTIM_COMPARE_MATCH_CB_ID : - hlptim->CompareMatchCallback = pCallback; - break; - - case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID : - hlptim->AutoReloadMatchCallback = pCallback; - break; - - case HAL_LPTIM_TRIGGER_CB_ID : - hlptim->TriggerCallback = pCallback; - break; - - case HAL_LPTIM_COMPARE_WRITE_CB_ID : - hlptim->CompareWriteCallback = pCallback; - break; - - case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID : - hlptim->AutoReloadWriteCallback = pCallback; - break; - - case HAL_LPTIM_DIRECTION_UP_CB_ID : - hlptim->DirectionUpCallback = pCallback; - break; - - case HAL_LPTIM_DIRECTION_DOWN_CB_ID : - hlptim->DirectionDownCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hlptim->State == HAL_LPTIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_LPTIM_MSPINIT_CB_ID : - hlptim->MspInitCallback = pCallback; - break; - - case HAL_LPTIM_MSPDEINIT_CB_ID : - hlptim->MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hlptim); - - return status; -} - -/** - * @brief Unregister a LPTIM callback - * LLPTIM callback is redirected to the weak predefined callback - * @param hlptim LPTIM handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_LPTIM_MSPINIT_CB_ID LPTIM Base Msp Init Callback ID - * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID LPTIM Base Msp DeInit Callback ID - * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare match Callback ID - * @arg @ref HAL_LPTIM_AUTORELOAD_MATCH_CB_ID Auto-reload match Callback ID - * @arg @ref HAL_LPTIM_TRIGGER_CB_ID External trigger event detection Callback ID - * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare register write complete Callback ID - * @arg @ref HAL_LPTIM_AUTORELOAD_WRITE_CB_ID Auto-reload register write complete Callback ID - * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Up-counting direction change Callback ID - * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Down-counting direction change Callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *hlptim, - HAL_LPTIM_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hlptim); - - if (hlptim->State == HAL_LPTIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_LPTIM_MSPINIT_CB_ID : - /* Legacy weak MspInit Callback */ - hlptim->MspInitCallback = HAL_LPTIM_MspInit; - break; - - case HAL_LPTIM_MSPDEINIT_CB_ID : - /* Legacy weak Msp DeInit Callback */ - hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; - break; - - case HAL_LPTIM_COMPARE_MATCH_CB_ID : - /* Legacy weak Compare match Callback */ - hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; - break; - - case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID : - /* Legacy weak Auto-reload match Callback */ - hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; - break; - - case HAL_LPTIM_TRIGGER_CB_ID : - /* Legacy weak External trigger event detection Callback */ - hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback; - break; - - case HAL_LPTIM_COMPARE_WRITE_CB_ID : - /* Legacy weak Compare register write complete Callback */ - hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; - break; - - case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID : - /* Legacy weak Auto-reload register write complete Callback */ - hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; - break; - - case HAL_LPTIM_DIRECTION_UP_CB_ID : - /* Legacy weak Up-counting direction change Callback */ - hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; - break; - - case HAL_LPTIM_DIRECTION_DOWN_CB_ID : - /* Legacy weak Down-counting direction change Callback */ - hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hlptim->State == HAL_LPTIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_LPTIM_MSPINIT_CB_ID : - /* Legacy weak MspInit Callback */ - hlptim->MspInitCallback = HAL_LPTIM_MspInit; - break; - - case HAL_LPTIM_MSPDEINIT_CB_ID : - /* Legacy weak Msp DeInit Callback */ - hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hlptim); - - return status; -} -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup LPTIM_Group5 Peripheral State functions - * @brief Peripheral State functions. - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Return the LPTIM handle state. - * @param hlptim LPTIM handle - * @retval HAL state - */ -HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim) -{ - /* Return LPTIM handle state */ - return hlptim->State; -} - -/** - * @} - */ - - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup LPTIM_Private_Functions LPTIM Private Functions - * @{ - */ -#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -/** - * @brief Reset interrupt callbacks to the legacy weak callbacks. - * @param lptim pointer to a LPTIM_HandleTypeDef structure that contains - * the configuration information for LPTIM module. - * @retval None - */ -static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim) -{ - /* Reset the LPTIM callback to the legacy weak callbacks */ - lptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; - lptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; - lptim->TriggerCallback = HAL_LPTIM_TriggerCallback; - lptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; - lptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; - lptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; - lptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; -} -#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ - -/** - * @brief LPTimer Wait for flag set - * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains - * the configuration information for LPTIM module. - * @param flag The lptim flag - * @retval HAL status - */ -static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag) -{ - HAL_StatusTypeDef result = HAL_OK; - uint32_t count = TIMEOUT * (SystemCoreClock / 20UL / 1000UL); - do - { - count--; - if (count == 0UL) - { - result = HAL_TIMEOUT; - } - } while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL)); - - return result; -} - -/** - * @brief Disable LPTIM HW instance. - * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains - * the configuration information for LPTIM module. - * @note The following sequence is required to solve LPTIM disable HW limitation. - * Please check Errata Sheet ES0335 for more details under "MCU may remain - * stuck in LPTIM interrupt when entering Stop mode" section. - * @retval None - */ -void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim) -{ - uint32_t tmpclksource = 0; - uint32_t tmpIER; - uint32_t tmpCFGR; - uint32_t tmpCMP; - uint32_t tmpARR; - uint32_t primask_bit; - uint32_t tmpOR; - - /* Enter critical section */ - primask_bit = __get_PRIMASK(); - __set_PRIMASK(1) ; - - /*********** Save LPTIM Config ***********/ - /* Save LPTIM source clock */ - switch ((uint32_t)hlptim->Instance) - { - case LPTIM1_BASE: - tmpclksource = __HAL_RCC_GET_LPTIM1_SOURCE(); - break; - default: - break; - } - - /* Save LPTIM configuration registers */ - tmpIER = hlptim->Instance->IER; - tmpCFGR = hlptim->Instance->CFGR; - tmpCMP = hlptim->Instance->CMP; - tmpARR = hlptim->Instance->ARR; - tmpOR = hlptim->Instance->OR; - - /*********** Reset LPTIM ***********/ - switch ((uint32_t)hlptim->Instance) - { - case LPTIM1_BASE: - __HAL_RCC_LPTIM1_FORCE_RESET(); - __HAL_RCC_LPTIM1_RELEASE_RESET(); - break; - default: - break; - } - - /*********** Restore LPTIM Config ***********/ - if ((tmpCMP != 0UL) || (tmpARR != 0UL)) - { - /* Force LPTIM source kernel clock from APB */ - switch ((uint32_t)hlptim->Instance) - { - case LPTIM1_BASE: - __HAL_RCC_LPTIM1_CONFIG(RCC_LPTIM1CLKSOURCE_PCLK1); - break; - default: - break; - } - - if (tmpCMP != 0UL) - { - /* Restore CMP register (LPTIM should be enabled first) */ - hlptim->Instance->CR |= LPTIM_CR_ENABLE; - hlptim->Instance->CMP = tmpCMP; - - /* Wait for the completion of the write operation to the LPTIM_CMP register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) - { - hlptim->State = HAL_LPTIM_STATE_TIMEOUT; - } - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); - } - - if (tmpARR != 0UL) - { - /* Restore ARR register (LPTIM should be enabled first) */ - hlptim->Instance->CR |= LPTIM_CR_ENABLE; - hlptim->Instance->ARR = tmpARR; - - /* Wait for the completion of the write operation to the LPTIM_ARR register */ - if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) - { - hlptim->State = HAL_LPTIM_STATE_TIMEOUT; - } - - __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); - } - - /* Restore LPTIM source kernel clock */ - switch ((uint32_t)hlptim->Instance) - { - case LPTIM1_BASE: - __HAL_RCC_LPTIM1_CONFIG(tmpclksource); - break; - default: - break; - } - } - - /* Restore configuration registers (LPTIM should be disabled first) */ - hlptim->Instance->CR &= ~(LPTIM_CR_ENABLE); - hlptim->Instance->IER = tmpIER; - hlptim->Instance->CFGR = tmpCFGR; - hlptim->Instance->OR = tmpOR; - - /* Exit critical section: restore previous priority mask */ - __set_PRIMASK(primask_bit); -} -/** - * @} - */ -#endif /* LPTIM1 */ - -#endif /* HAL_LPTIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c deleted file mode 100644 index fcc5fa1..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c +++ /dev/null @@ -1,2215 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_ltdc.c - * @author MCD Application Team - * @brief LTDC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the LTDC peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LTDC HAL driver can be used as follows: - - (#) Declare a LTDC_HandleTypeDef handle structure, for example: LTDC_HandleTypeDef hltdc; - - (#) Initialize the LTDC low level resources by implementing the HAL_LTDC_MspInit() API: - (##) Enable the LTDC interface clock - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the LTDC interrupt priority - (+++) Enable the NVIC LTDC IRQ Channel - - (#) Initialize the required configuration through the following parameters: - the LTDC timing, the horizontal and vertical polarity, the pixel clock polarity, - Data Enable polarity and the LTDC background color value using HAL_LTDC_Init() function - - *** Configuration *** - ========================= - [..] - (#) Program the required configuration through the following parameters: - the pixel format, the blending factors, input alpha value, the window size - and the image size using HAL_LTDC_ConfigLayer() function for foreground - or/and background layer. - - (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and - HAL_LTDC_EnableCLUT functions. - - (#) Optionally, enable the Dither using HAL_LTDC_EnableDither(). - - (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying() - and HAL_LTDC_EnableColorKeying functions. - - (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent() - function - - (#) If needed, reconfigure and change the pixel format value, the alpha value - value, the window size, the window position and the layer start address - for foreground or/and background layer using respectively the following - functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(), - HAL_LTDC_SetWindowPosition() and HAL_LTDC_SetAddress(). - - (#) Variant functions with _NoReload suffix allows to set the LTDC configuration/settings without immediate reload. - This is useful in case when the program requires to modify serval LTDC settings (on one or both layers) - then applying(reload) these settings in one shot by calling the function HAL_LTDC_Reload(). - - After calling the _NoReload functions to set different color/format/layer settings, - the program shall call the function HAL_LTDC_Reload() to apply(reload) these settings. - Function HAL_LTDC_Reload() can be called with the parameter ReloadType set to LTDC_RELOAD_IMMEDIATE if - an immediate reload is required. - Function HAL_LTDC_Reload() can be called with the parameter ReloadType set to LTDC_RELOAD_VERTICAL_BLANKING if - the reload should be done in the next vertical blanking period, - this option allows to avoid display flicker by applying the new settings during the vertical blanking period. - - - (#) To control LTDC state you can use the following function: HAL_LTDC_GetState() - - *** LTDC HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in LTDC HAL driver. - - (+) __HAL_LTDC_ENABLE: Enable the LTDC. - (+) __HAL_LTDC_DISABLE: Disable the LTDC. - (+) __HAL_LTDC_LAYER_ENABLE: Enable an LTDC Layer. - (+) __HAL_LTDC_LAYER_DISABLE: Disable an LTDC Layer. - (+) __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG: Reload Layer Configuration. - (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags. - (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags. - (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts. - (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts. - (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not. - - [..] - (@) You can refer to the LTDC HAL driver header file for more useful macros - - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_LTDC_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use function HAL_LTDC_RegisterCallback() to register a callback. - - [..] - Function HAL_LTDC_RegisterCallback() allows to register following callbacks: - (+) LineEventCallback : LTDC Line Event Callback. - (+) ReloadEventCallback : LTDC Reload Event Callback. - (+) ErrorCallback : LTDC Error Callback - (+) MspInitCallback : LTDC MspInit. - (+) MspDeInitCallback : LTDC MspDeInit. - [..] - This function takes as parameters the HAL peripheral handle, the callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_LTDC_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_LTDC_UnRegisterCallback() takes as parameters the HAL peripheral handle - and the callback ID. - [..] - This function allows to reset following callbacks: - (+) LineEventCallback : LTDC Line Event Callback - (+) ReloadEventCallback : LTDC Reload Event Callback - (+) ErrorCallback : LTDC Error Callback - (+) MspInitCallback : LTDC MspInit - (+) MspDeInitCallback : LTDC MspDeInit. - - [..] - By default, after the HAL_LTDC_Init and when the state is HAL_LTDC_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_LTDC_LineEventCallback(), HAL_LTDC_ErrorCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak (surcharged) functions in the HAL_LTDC_Init() and HAL_LTDC_DeInit() - only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_LTDC_Init() and HAL_LTDC_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_LTDC_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_LTDC_STATE_READY or HAL_LTDC_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_LTDC_RegisterCallback() before calling HAL_LTDC_DeInit() - or HAL_LTDC_Init() function. - - [..] - When the compilation define USE_HAL_LTDC_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_LTDC_MODULE_ENABLED - -#if defined (LTDC) - -/** @defgroup LTDC LTDC - * @brief LTDC HAL module driver - * @{ - */ - - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define LTDC_TIMEOUT_VALUE ((uint32_t)100U) /* 100ms */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup LTDC_Exported_Functions LTDC Exported Functions - * @{ - */ - -/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the LTDC - (+) De-initialize the LTDC - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the LTDC according to the specified parameters in the LTDC_InitTypeDef. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc) -{ - uint32_t tmp; - uint32_t tmp1; - - /* Check the LTDC peripheral state */ - if (hltdc == NULL) - { - return HAL_ERROR; - } - - /* Check function parameters */ - assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); - assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync)); - assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync)); - assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP)); - assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP)); - assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH)); - assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW)); - assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh)); - assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth)); - assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity)); - assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity)); - assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity)); - assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity)); - -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - if (hltdc->State == HAL_LTDC_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hltdc->Lock = HAL_UNLOCKED; - - /* Reset the LTDC callback to the legacy weak callbacks */ - hltdc->LineEventCallback = HAL_LTDC_LineEventCallback; /* Legacy weak LineEventCallback */ - hltdc->ReloadEventCallback = HAL_LTDC_ReloadEventCallback; /* Legacy weak ReloadEventCallback */ - hltdc->ErrorCallback = HAL_LTDC_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hltdc->MspInitCallback == NULL) - { - hltdc->MspInitCallback = HAL_LTDC_MspInit; - } - /* Init the low level hardware */ - hltdc->MspInitCallback(hltdc); - } -#else - if (hltdc->State == HAL_LTDC_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hltdc->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - HAL_LTDC_MspInit(hltdc); - } -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Configure the HS, VS, DE and PC polarity */ - hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL); - hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \ - hltdc->Init.DEPolarity | hltdc->Init.PCPolarity); - - /* Set Synchronization size */ - hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW); - tmp = (hltdc->Init.HorizontalSync << 16U); - hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync); - - /* Set Accumulated Back porch */ - hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP); - tmp = (hltdc->Init.AccumulatedHBP << 16U); - hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP); - - /* Set Accumulated Active Width */ - hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW); - tmp = (hltdc->Init.AccumulatedActiveW << 16U); - hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH); - - /* Set Total Width */ - hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW); - tmp = (hltdc->Init.TotalWidth << 16U); - hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh); - - /* Set the background color value */ - tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8U); - tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16U); - hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED); - hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue); - - /* Enable the Transfer Error and FIFO underrun interrupts */ - __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE | LTDC_IT_FU); - - /* Enable LTDC by setting LTDCEN bit */ - __HAL_LTDC_ENABLE(hltdc); - - /* Initialize the error code */ - hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; - - /* Initialize the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - return HAL_OK; -} - -/** - * @brief De-initialize the LTDC peripheral. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval None - */ - -HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc) -{ - uint32_t tickstart; - - /* Check the LTDC peripheral state */ - if (hltdc == NULL) - { - return HAL_ERROR; - } - - /* Check function parameters */ - assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); - - /* Disable LTDC Layer 1 */ - __HAL_LTDC_LAYER_DISABLE(hltdc, LTDC_LAYER_1); - -#if defined(LTDC_Layer2_BASE) - /* Disable LTDC Layer 2 */ - __HAL_LTDC_LAYER_DISABLE(hltdc, LTDC_LAYER_2); -#endif /* LTDC_Layer2_BASE */ - - /* Reload during vertical blanking period */ - __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(hltdc); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for VSYNC Interrupt */ - while (READ_BIT(hltdc->Instance->CDSR, LTDC_CDSR_VSYNCS) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > LTDC_TIMEOUT_VALUE) - { - break; - } - } - - /* Disable LTDC */ - __HAL_LTDC_DISABLE(hltdc); - -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - if (hltdc->MspDeInitCallback == NULL) - { - hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; - } - /* DeInit the low level hardware */ - hltdc->MspDeInitCallback(hltdc); -#else - /* DeInit the low level hardware */ - HAL_LTDC_MspDeInit(hltdc); -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - - /* Initialize the error code */ - hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; - - /* Initialize the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Initialize the LTDC MSP. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval None - */ -__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hltdc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LTDC_MspInit could be implemented in the user file - */ -} - -/** - * @brief De-initialize the LTDC MSP. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval None - */ -__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hltdc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LTDC_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User LTDC Callback - * To be used instead of the weak predefined callback - * @param hltdc ltdc handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_LTDC_LINE_EVENT_CB_ID Line Event Callback ID - * @arg @ref HAL_LTDC_RELOAD_EVENT_CB_ID Reload Event Callback ID - * @arg @ref HAL_LTDC_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_LTDC_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_LTDC_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, - pLTDC_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hltdc); - - if (hltdc->State == HAL_LTDC_STATE_READY) - { - switch (CallbackID) - { - case HAL_LTDC_LINE_EVENT_CB_ID : - hltdc->LineEventCallback = pCallback; - break; - - case HAL_LTDC_RELOAD_EVENT_CB_ID : - hltdc->ReloadEventCallback = pCallback; - break; - - case HAL_LTDC_ERROR_CB_ID : - hltdc->ErrorCallback = pCallback; - break; - - case HAL_LTDC_MSPINIT_CB_ID : - hltdc->MspInitCallback = pCallback; - break; - - case HAL_LTDC_MSPDEINIT_CB_ID : - hltdc->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hltdc->State == HAL_LTDC_STATE_RESET) - { - switch (CallbackID) - { - case HAL_LTDC_MSPINIT_CB_ID : - hltdc->MspInitCallback = pCallback; - break; - - case HAL_LTDC_MSPDEINIT_CB_ID : - hltdc->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hltdc); - - return status; -} - -/** - * @brief Unregister an LTDC Callback - * LTDC callback is redirected to the weak predefined callback - * @param hltdc ltdc handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_LTDC_LINE_EVENT_CB_ID Line Event Callback ID - * @arg @ref HAL_LTDC_RELOAD_EVENT_CB_ID Reload Event Callback ID - * @arg @ref HAL_LTDC_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_LTDC_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_LTDC_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hltdc); - - if (hltdc->State == HAL_LTDC_STATE_READY) - { - switch (CallbackID) - { - case HAL_LTDC_LINE_EVENT_CB_ID : - hltdc->LineEventCallback = HAL_LTDC_LineEventCallback; /* Legacy weak LineEventCallback */ - break; - - case HAL_LTDC_RELOAD_EVENT_CB_ID : - hltdc->ReloadEventCallback = HAL_LTDC_ReloadEventCallback; /* Legacy weak ReloadEventCallback */ - break; - - case HAL_LTDC_ERROR_CB_ID : - hltdc->ErrorCallback = HAL_LTDC_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_LTDC_MSPINIT_CB_ID : - hltdc->MspInitCallback = HAL_LTDC_MspInit; /* Legcay weak MspInit Callback */ - break; - - case HAL_LTDC_MSPDEINIT_CB_ID : - hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; /* Legcay weak MspDeInit Callback */ - break; - - default : - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hltdc->State == HAL_LTDC_STATE_RESET) - { - switch (CallbackID) - { - case HAL_LTDC_MSPINIT_CB_ID : - hltdc->MspInitCallback = HAL_LTDC_MspInit; /* Legcay weak MspInit Callback */ - break; - - case HAL_LTDC_MSPDEINIT_CB_ID : - hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; /* Legcay weak MspDeInit Callback */ - break; - - default : - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hltdc); - - return status; -} -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides function allowing to: - (+) Handle LTDC interrupt request - -@endverbatim - * @{ - */ -/** - * @brief Handle LTDC interrupt request. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval HAL status - */ -void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc) -{ - uint32_t isrflags = READ_REG(hltdc->Instance->ISR); - uint32_t itsources = READ_REG(hltdc->Instance->IER); - - /* Transfer Error Interrupt management ***************************************/ - if (((isrflags & LTDC_ISR_TERRIF) != 0U) && ((itsources & LTDC_IER_TERRIE) != 0U)) - { - /* Disable the transfer Error interrupt */ - __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE); - - /* Clear the transfer error flag */ - __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE); - - /* Update error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_TE; - - /* Change LTDC state */ - hltdc->State = HAL_LTDC_STATE_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - /* Transfer error Callback */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hltdc->ErrorCallback(hltdc); -#else - /* Call legacy error callback*/ - HAL_LTDC_ErrorCallback(hltdc); -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - } - - /* FIFO underrun Interrupt management ***************************************/ - if (((isrflags & LTDC_ISR_FUIF) != 0U) && ((itsources & LTDC_IER_FUIE) != 0U)) - { - /* Disable the FIFO underrun interrupt */ - __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU); - - /* Clear the FIFO underrun flag */ - __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU); - - /* Update error code */ - hltdc->ErrorCode |= HAL_LTDC_ERROR_FU; - - /* Change LTDC state */ - hltdc->State = HAL_LTDC_STATE_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - /* Transfer error Callback */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - hltdc->ErrorCallback(hltdc); -#else - /* Call legacy error callback*/ - HAL_LTDC_ErrorCallback(hltdc); -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - } - - /* Line Interrupt management ************************************************/ - if (((isrflags & LTDC_ISR_LIF) != 0U) && ((itsources & LTDC_IER_LIE) != 0U)) - { - /* Disable the Line interrupt */ - __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); - - /* Clear the Line interrupt flag */ - __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI); - - /* Change LTDC state */ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - /* Line interrupt Callback */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - /*Call registered Line Event callback */ - hltdc->LineEventCallback(hltdc); -#else - /*Call Legacy Line Event callback */ - HAL_LTDC_LineEventCallback(hltdc); -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - } - - /* Register reload Interrupt management ***************************************/ - if (((isrflags & LTDC_ISR_RRIF) != 0U) && ((itsources & LTDC_IER_RRIE) != 0U)) - { - /* Disable the register reload interrupt */ - __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_RR); - - /* Clear the register reload flag */ - __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_RR); - - /* Change LTDC state */ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - /* Reload interrupt Callback */ -#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) - /*Call registered reload Event callback */ - hltdc->ReloadEventCallback(hltdc); -#else - /*Call Legacy Reload Event callback */ - HAL_LTDC_ReloadEventCallback(hltdc); -#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Error LTDC callback. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval None - */ -__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hltdc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LTDC_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief Line Event callback. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval None - */ -__weak void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hltdc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LTDC_LineEventCallback could be implemented in the user file - */ -} - -/** - * @brief Reload Event callback. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval None - */ -__weak void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hltdc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_LTDC_ReloadEvenCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the LTDC foreground or/and background parameters. - (+) Set the active layer. - (+) Configure the color keying. - (+) Configure the C-LUT. - (+) Enable / Disable the color keying. - (+) Enable / Disable the C-LUT. - (+) Update the layer position. - (+) Update the layer size. - (+) Update pixel format on the fly. - (+) Update transparency on the fly. - (+) Update address on the fly. - -@endverbatim - * @{ - */ - -/** - * @brief Configure the LTDC Layer according to the specified - * parameters in the LTDC_InitTypeDef and create the associated handle. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param pLayerCfg pointer to a LTDC_LayerCfgTypeDef structure that contains - * the configuration information for the Layer. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); - assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); - assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); - assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); - assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); - assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha)); - assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); - assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); - assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); - assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); - assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Copy new layer configuration into handle structure */ - hltdc->LayerCfg[LayerIdx] = *pLayerCfg; - - /* Configure the LTDC Layer */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Initialize the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Configure the color keying. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param RGBValue the color key value - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Configure the default color values */ - LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); - LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Load the color lookup table. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param pCLUT pointer to the color lookup table address. - * @param CLUTSize the color lookup table size. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx) -{ - uint32_t tmp; - uint32_t counter; - uint32_t *pcolorlut = pCLUT; - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - for (counter = 0U; (counter < CLUTSize); counter++) - { - if (hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44) - { - tmp = (((counter + (16U * counter)) << 24U) | ((uint32_t)(*pcolorlut) & 0xFFU) | \ - ((uint32_t)(*pcolorlut) & 0xFF00U) | ((uint32_t)(*pcolorlut) & 0xFF0000U)); - } - else - { - tmp = ((counter << 24U) | ((uint32_t)(*pcolorlut) & 0xFFU) | \ - ((uint32_t)(*pcolorlut) & 0xFF00U) | ((uint32_t)(*pcolorlut) & 0xFF0000U)); - } - - pcolorlut++; - - /* Specifies the C-LUT address and RGB value */ - LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp; - } - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Enable the color keying. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Enable LTDC color keying by setting COLKEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Disable the color keying. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable LTDC color keying by setting COLKEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Enable the color lookup table. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Enable LTDC color lookup table by setting CLUTEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Disable the color lookup table. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable LTDC color lookup table by setting CLUTEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Enable Dither. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc) -{ - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Enable Dither by setting DTEN bit */ - LTDC->GCR |= (uint32_t)LTDC_GCR_DEN; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Disable Dither. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc) -{ - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable Dither by setting DTEN bit */ - LTDC->GCR &= ~(uint32_t)LTDC_GCR_DEN; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Set the LTDC window size. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param XSize LTDC Pixel per line - * @param YSize LTDC Line number - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters (Layers parameters)*/ - assert_param(IS_LTDC_LAYER(LayerIdx)); - assert_param(IS_LTDC_CFBLL(XSize)); - assert_param(IS_LTDC_CFBLNBR(YSize)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* update horizontal stop */ - pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; - - /* update vertical stop */ - pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; - - /* Reconfigures the color frame buffer pitch in byte */ - pLayerCfg->ImageWidth = XSize; - - /* Reconfigures the frame buffer line number */ - pLayerCfg->ImageHeight = YSize; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Set the LTDC window position. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param X0 LTDC window X offset - * @param Y0 LTDC window Y offset - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - assert_param(IS_LTDC_CFBLL(X0)); - assert_param(IS_LTDC_CFBLNBR(Y0)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* update horizontal start/stop */ - pLayerCfg->WindowX0 = X0; - pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; - - /* update vertical start/stop */ - pLayerCfg->WindowY0 = Y0; - pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Reconfigure the pixel format. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param Pixelformat new pixel format value. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* Reconfigure the pixel format */ - pLayerCfg->PixelFormat = Pixelformat; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Reconfigure the layer alpha value. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param Alpha new alpha value. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_ALPHA(Alpha)); - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* Reconfigure the Alpha value */ - pLayerCfg->Alpha = Alpha; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} -/** - * @brief Reconfigure the frame buffer Address. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param Address new address value. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* Reconfigure the Address */ - pLayerCfg->FBStartAdress = Address; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Set the Immediate Reload type */ - hltdc->Instance->SRCR = LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width - * that is larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to - * layer for which we want to read and display on screen only a portion 320x240 taken in the center - * of the buffer. - * The pitch in pixels will be in that case 800 pixels and not 320 pixels as initially configured by previous - * call to HAL_LTDC_ConfigLayer(). - * @note This function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default - * pitch configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above). - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LinePitchInPixels New line pitch in pixels to configure for LTDC layer 'LayerIdx'. - * @param LayerIdx LTDC layer index concerned by the modification of line pitch. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx) -{ - uint32_t tmp; - uint32_t pitchUpdate; - uint32_t pixelFormat; - - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* get LayerIdx used pixel format */ - pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat; - - if (pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) - { - tmp = 4U; - } - else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888) - { - tmp = 3U; - } - else if ((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ - (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ - (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ - (pixelFormat == LTDC_PIXEL_FORMAT_AL88)) - { - tmp = 2U; - } - else - { - tmp = 1U; - } - - pitchUpdate = ((LinePitchInPixels * tmp) << 16U); - - /* Clear previously set standard pitch */ - LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP; - - /* Set the Reload type as immediate update of LTDC pitch configured above */ - LTDC->SRCR |= LTDC_SRCR_IMR; - - /* Set new line pitch value */ - LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate; - - /* Set the Reload type as immediate update of LTDC pitch configured above */ - LTDC->SRCR |= LTDC_SRCR_IMR; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Define the position of the line interrupt. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param Line Line Interrupt Position. - * @note User application may resort to HAL_LTDC_LineEventCallback() at line interrupt generation. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LIPOS(Line)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable the Line interrupt */ - __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); - - /* Set the Line Interrupt position */ - LTDC->LIPCR = (uint32_t)Line; - - /* Enable the Line interrupt */ - __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI); - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Reload LTDC Layers configuration. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param ReloadType This parameter can be one of the following values : - * LTDC_RELOAD_IMMEDIATE : Immediate Reload - * LTDC_RELOAD_VERTICAL_BLANKING : Reload in the next Vertical Blanking - * @note User application may resort to HAL_LTDC_ReloadEventCallback() at reload interrupt generation. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType) -{ - /* Check the parameters */ - assert_param(IS_LTDC_RELOAD(ReloadType)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Enable the Reload interrupt */ - __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_RR); - - /* Apply Reload type */ - hltdc->Instance->SRCR = ReloadType; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Configure the LTDC Layer according to the specified without reloading - * parameters in the LTDC_InitTypeDef and create the associated handle. - * Variant of the function HAL_LTDC_ConfigLayer without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param pLayerCfg pointer to a LTDC_LayerCfgTypeDef structure that contains - * the configuration information for the Layer. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, - uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); - assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); - assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); - assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); - assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); - assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha)); - assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); - assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); - assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); - assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); - assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Copy new layer configuration into handle structure */ - hltdc->LayerCfg[LayerIdx] = *pLayerCfg; - - /* Configure the LTDC Layer */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Initialize the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Set the LTDC window size without reloading. - * Variant of the function HAL_LTDC_SetWindowSize without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param XSize LTDC Pixel per line - * @param YSize LTDC Line number - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, - uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters (Layers parameters)*/ - assert_param(IS_LTDC_LAYER(LayerIdx)); - assert_param(IS_LTDC_CFBLL(XSize)); - assert_param(IS_LTDC_CFBLNBR(YSize)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* update horizontal stop */ - pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; - - /* update vertical stop */ - pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; - - /* Reconfigures the color frame buffer pitch in byte */ - pLayerCfg->ImageWidth = XSize; - - /* Reconfigures the frame buffer line number */ - pLayerCfg->ImageHeight = YSize; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Set the LTDC window position without reloading. - * Variant of the function HAL_LTDC_SetWindowPosition without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param X0 LTDC window X offset - * @param Y0 LTDC window Y offset - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, - uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - assert_param(IS_LTDC_CFBLL(X0)); - assert_param(IS_LTDC_CFBLNBR(Y0)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* update horizontal start/stop */ - pLayerCfg->WindowX0 = X0; - pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; - - /* update vertical start/stop */ - pLayerCfg->WindowY0 = Y0; - pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Reconfigure the pixel format without reloading. - * Variant of the function HAL_LTDC_SetPixelFormat without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDfef structure that contains - * the configuration information for the LTDC. - * @param Pixelformat new pixel format value. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* Reconfigure the pixel format */ - pLayerCfg->PixelFormat = Pixelformat; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Reconfigure the layer alpha value without reloading. - * Variant of the function HAL_LTDC_SetAlpha without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param Alpha new alpha value. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_ALPHA(Alpha)); - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* Reconfigure the Alpha value */ - pLayerCfg->Alpha = Alpha; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Reconfigure the frame buffer Address without reloading. - * Variant of the function HAL_LTDC_SetAddress without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param Address new address value. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) -{ - LTDC_LayerCfgTypeDef *pLayerCfg; - - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Get layer configuration from handle structure */ - pLayerCfg = &hltdc->LayerCfg[LayerIdx]; - - /* Reconfigure the Address */ - pLayerCfg->FBStartAdress = Address; - - /* Set LTDC parameters */ - LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width - * that is larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to - * layer for which we want to read and display on screen only a portion 320x240 taken in the center - * of the buffer. - * The pitch in pixels will be in that case 800 pixels and not 320 pixels as initially configured by - * previous call to HAL_LTDC_ConfigLayer(). - * @note This function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default - * pitch configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above). - * Variant of the function HAL_LTDC_SetPitch without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LinePitchInPixels New line pitch in pixels to configure for LTDC layer 'LayerIdx'. - * @param LayerIdx LTDC layer index concerned by the modification of line pitch. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx) -{ - uint32_t tmp; - uint32_t pitchUpdate; - uint32_t pixelFormat; - - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* get LayerIdx used pixel format */ - pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat; - - if (pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) - { - tmp = 4U; - } - else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888) - { - tmp = 3U; - } - else if ((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ - (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ - (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ - (pixelFormat == LTDC_PIXEL_FORMAT_AL88)) - { - tmp = 2U; - } - else - { - tmp = 1U; - } - - pitchUpdate = ((LinePitchInPixels * tmp) << 16U); - - /* Clear previously set standard pitch */ - LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP; - - /* Set new line pitch value */ - LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - - -/** - * @brief Configure the color keying without reloading. - * Variant of the function HAL_LTDC_ConfigColorKeying without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param RGBValue the color key value - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Configure the default color values */ - LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); - LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Enable the color keying without reloading. - * Variant of the function HAL_LTDC_EnableColorKeying without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Enable LTDC color keying by setting COLKEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Disable the color keying without reloading. - * Variant of the function HAL_LTDC_DisableColorKeying without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable LTDC color keying by setting COLKEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Enable the color lookup table without reloading. - * Variant of the function HAL_LTDC_EnableCLUT without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable LTDC color lookup table by setting CLUTEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @brief Disable the color lookup table without reloading. - * Variant of the function HAL_LTDC_DisableCLUT without immediate reload. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: - * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LTDC_LAYER(LayerIdx)); - - /* Process locked */ - __HAL_LOCK(hltdc); - - /* Change LTDC peripheral state */ - hltdc->State = HAL_LTDC_STATE_BUSY; - - /* Disable LTDC color lookup table by setting CLUTEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; - - /* Change the LTDC state*/ - hltdc->State = HAL_LTDC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hltdc); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the LTDC handle state. - (+) Get the LTDC handle error code. - -@endverbatim - * @{ - */ - -/** - * @brief Return the LTDC handle state. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval HAL state - */ -HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc) -{ - return hltdc->State; -} - -/** - * @brief Return the LTDC handle error code. - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @retval LTDC Error Code - */ -uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc) -{ - return hltdc->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup LTDC_Private_Functions LTDC Private Functions - * @{ - */ - -/** - * @brief Configure the LTDC peripheral - * @param hltdc Pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param pLayerCfg Pointer LTDC Layer Configuration structure - * @param LayerIdx LTDC Layer index. - * This parameter can be one of the following values: LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) - * @retval None - */ -static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) -{ - uint32_t tmp; - uint32_t tmp1; - uint32_t tmp2; - - /* Configure the horizontal start and stop position */ - tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U)) << 16U); - LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS); - LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + \ - ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U) + 1U) | tmp); - - /* Configure the vertical start and stop position */ - tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16U); - LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS); - LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1U) | tmp); - - /* Specifies the pixel format */ - LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF); - LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat); - - /* Configure the default color values */ - tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8U); - tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16U); - tmp2 = (pLayerCfg->Alpha0 << 24U); - LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | - LTDC_LxDCCR_DCALPHA); - LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2); - - /* Specifies the constant alpha value */ - LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA); - LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha); - - /* Specifies the blending factors */ - LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1); - LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2); - - /* Configure the color frame buffer start address */ - LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD); - LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress); - - if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) - { - tmp = 4U; - } - else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888) - { - tmp = 3U; - } - else if ((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ - (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ - (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ - (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88)) - { - tmp = 2U; - } - else - { - tmp = 1U; - } - - /* Configure the color frame buffer pitch in byte */ - LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP); - LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16U) | \ - (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp) + 3U)); - /* Configure the frame buffer line number */ - LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR); - LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight); - - /* Enable LTDC_Layer by setting LEN bit */ - LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN; -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* LTDC */ - -#endif /* HAL_LTDC_MODULE_ENABLED */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc_ex.c deleted file mode 100644 index 2ee7795..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc_ex.c +++ /dev/null @@ -1,151 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_ltdc_ex.c - * @author MCD Application Team - * @brief LTDC Extension HAL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined(HAL_LTDC_MODULE_ENABLED) && defined(HAL_DSI_MODULE_ENABLED) - -#if defined (LTDC) && defined (DSI) - -/** @defgroup LTDCEx LTDCEx - * @brief LTDC HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions - * @{ - */ - -/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the LTDC - -@endverbatim - * @{ - */ - -/** - * @brief Retrieve common parameters from DSI Video mode configuration structure - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains - * the DSI video mode configuration parameters - * @note The implementation of this function is taking into account the LTDC - * polarities inversion as described in the current LTDC specification - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg) -{ - /* Retrieve signal polarities from DSI */ - - /* The following polarity is inverted: - LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH */ - - /* Note 1 : Code in line w/ Current LTDC specification */ - hltdc->Init.DEPolarity = (VidCfg->DEPolarity == \ - DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH; - hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AH : LTDC_VSPOLARITY_AL; - hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AH : LTDC_HSPOLARITY_AL; - - /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */ - /* hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29; - hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29; - hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; */ - - /* Retrieve vertical timing parameters from DSI */ - hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U; - hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U; - hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \ - VidCfg->VerticalActive - 1U; - hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \ - VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U; - - return HAL_OK; -} - -/** - * @brief Retrieve common parameters from DSI Adapted command mode configuration structure - * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains - * the configuration information for the LTDC. - * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains - * the DSI command mode configuration parameters - * @note The implementation of this function is taking into account the LTDC - * polarities inversion as described in the current LTDC specification - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg) -{ - /* Retrieve signal polarities from DSI */ - - /* The following polarities are inverted: - LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH - LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH - LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/ - - /* Note 1 : Code in line w/ Current LTDC specification */ - hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == \ - DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH; - hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH; - hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH; - - /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */ - /* hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29; - hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29; - hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; */ - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* LTDC && DSI */ - -#endif /* HAL_LTCD_MODULE_ENABLED && HAL_DSI_MODULE_ENABLED */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c deleted file mode 100644 index 292faf1..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c +++ /dev/null @@ -1,341 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd_ex.c - * @author MCD Application Team - * @brief PCD Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PCDEx PCDEx - * @brief PCD Extended HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ - -/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @brief PCDEx control functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Update FIFO configuration - -@endverbatim - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** - * @brief Set Tx FIFO - * @param hpcd PCD handle - * @param fifo The number of Tx fifo - * @param size Fifo size - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) -{ - uint8_t i; - uint32_t Tx_Offset; - - /* TXn min size = 16 words. (n : Transmit FIFO index) - When a TxFIFO is not used, the Configuration should be as follows: - case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txm can use the space allocated for Txn. - case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txn should be configured with the minimum space of 16 words - The FIFO is used optimally when used TxFIFOs are allocated in the top - of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. - When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ - - Tx_Offset = hpcd->Instance->GRXFSIZ; - - if (fifo == 0U) - { - hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; - } - else - { - Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; - for (i = 0U; i < (fifo - 1U); i++) - { - Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); - } - - /* Multiply Tx_Size by 2 to get higher performance */ - hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; - } - - return HAL_OK; -} - -/** - * @brief Set Rx FIFO - * @param hpcd PCD handle - * @param size Size of Rx fifo - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) -{ - hpcd->Instance->GRXFSIZ = size; - - return HAL_OK; -} -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Activate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = 1U; - hpcd->LPM_State = LPM_L0; - USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; - USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); - - return HAL_OK; -} - -/** - * @brief Deactivate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = 0U; - USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; - USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); - - return HAL_OK; -} -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Handle BatteryCharging Process. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t tickstart = HAL_GetTick(); - - /* Enable DCD : Data Contact Detect */ - USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; - - /* Wait for Min DCD Timeout */ - HAL_Delay(300U); - - /* Check Detect flag */ - if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - /* Primary detection: checks if connected to Standard Downstream Port - (without charging capability) */ - USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN; - HAL_Delay(50U); - USBx->GCCFG |= USB_OTG_GCCFG_PDEN; - HAL_Delay(50U); - - if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U) - { - /* Case of Standard Downstream Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* start secondary detection to check connection to Charging Downstream - Port or Dedicated Charging Port */ - USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN; - HAL_Delay(50U); - USBx->GCCFG |= USB_OTG_GCCFG_SDEN; - HAL_Delay(50U); - - if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET) - { - /* case Dedicated Charging Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* case Charging Downstream Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - - /* Battery Charging capability discovery finished */ - (void)HAL_PCDEx_DeActivateBCD(hpcd); - - /* Check for the Timeout, else start USB Device */ - if ((HAL_GetTick() - tickstart) > 1000U) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Activate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); - USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); - - /* Power Down USB transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - - /* Enable Battery charging */ - USBx->GCCFG |= USB_OTG_GCCFG_BCDEN; - - hpcd->battery_charging_active = 1U; - - return HAL_OK; -} - -/** - * @brief Deactivate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); - USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); - - /* Disable Battery charging */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); - - hpcd->battery_charging_active = 0U; - - return HAL_OK; -} -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/** - * @brief Send LPM message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_LPM_Callback could be implemented in the user file - */ -} - -/** - * @brief Send BatteryCharging message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_BCD_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c deleted file mode 100644 index 77f9c35..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c +++ /dev/null @@ -1,600 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.c - * @author MCD Application Team - * @brief Extended PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of PWR extension peripheral: - * + Peripheral Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWREx PWREx - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWREx_Private_Constants - * @{ - */ -#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U -#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U -#define PWR_BKPREG_TIMEOUT_VALUE 1000U -#define PWR_VOSRDY_TIMEOUT_VALUE 1000U -/** - * @} - */ - - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### Peripheral extended features functions ##### - =============================================================================== - - *** Main and Backup Regulators configuration *** - ================================================ - [..] - (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from - the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is - retained even in Standby or VBAT mode when the low power backup regulator - is enabled. It can be considered as an internal EEPROM when VBAT is - always present. You can use the HAL_PWREx_EnableBkUpReg() function to - enable the low power backup regulator. - - (+) When the backup domain is supplied by VDD (analog switch connected to VDD) - the backup SRAM is powered from VDD which replaces the VBAT power supply to - save battery life. - - (+) The backup SRAM is not mass erased by a tamper event. It is read - protected to prevent confidential data, such as cryptographic private - key, from being accessed. The backup SRAM can be erased only through - the Flash interface when a protection level change from level 1 to - level 0 is requested. - -@- Refer to the description of Read protection (RDP) in the Flash - programming manual. - - (+) The main internal regulator can be configured to have a tradeoff between - performance and power consumption when the device does not operate at - the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() - macro which configure VOS bit in PWR_CR register - - Refer to the product datasheets for more details. - - *** FLASH Power Down configuration **** - ======================================= - [..] - (+) By setting the FPDS bit in the PWR_CR register by using the - HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power - down mode when the device enters Stop mode. When the Flash memory - is in power down mode, an additional startup delay is incurred when - waking up from Stop mode. - - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL - is OFF and the HSI or HSE clock source is selected as system clock. - The new value programmed is active only when the PLL is ON. - When the PLL is OFF, the voltage scale 3 is automatically selected. - Refer to the datasheets for more details. - - *** Over-Drive and Under-Drive configuration **** - ================================================= - [..] - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has - 2 operating modes available: - (++) Normal mode: The CPU and core logic operate at maximum frequency at a given - voltage scaling (scale 1, scale 2 or scale 3) - (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a - higher frequency than the normal mode for a given voltage scaling (scale 1, - scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and - disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow - the sequence described in Reference manual. - - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator - supplies a low power voltage to the 1.2V domain, thus preserving the content of registers - and internal SRAM. 2 operating modes are available: - (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only - available when the main regulator or the low power regulator is used in Scale 3 or - low voltage mode. - (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only - available when the main regulator or the low power regulator is in low voltage mode. - -@endverbatim - * @{ - */ - -/** - * @brief Enables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void) -{ - uint32_t tickstart = 0U; - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Disables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void) -{ - uint32_t tickstart = 0U; - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Enables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_EnableFlashPowerDown(void) -{ - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_DisableFlashPowerDown(void) -{ - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE; -} - -/** - * @brief Return Voltage Scaling Range. - * @retval The configured scale for the regulator voltage(VOS bit field). - * The returned value can be one of the following: - * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - */ -uint32_t HAL_PWREx_GetVoltageRange(void) -{ - return (PWR->CR & PWR_CR_VOS); -} - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * the maximum value of fHCLK = 168 MHz. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * the maximum value of fHCLK = 144 MHz. - * @note When moving from Range 1 to Range 2, the system frequency must be decreased to - * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API. - * When moving from Range 2 to Range 1, the system frequency can be increased to - * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0U; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - - /* Enable PWR RCC Clock Peripheral */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * the maximum value of fHCLK is 168 MHz. It can be extended to - * 180 MHz by activating the over-drive mode. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * the maximum value of fHCLK is 144 MHz. It can be extended to, - * 168 MHz by activating the over-drive mode. - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode, - * the maximum value of fHCLK is 120 MHz. - * @note To update the system clock frequency(SYSCLK): - * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig(). - * - Call the HAL_RCC_OscConfig() to configure the PLL. - * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale. - * - Set the new system clock frequency using the HAL_RCC_ClockConfig(). - * @note The scale can be modified only when the HSI or HSE clock source is selected - * as system clock source, otherwise the API returns HAL_ERROR. - * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits - * value in the PWR_CR1 register are not taken in account. - * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2. - * @note The new voltage scale is active only when the PLL is ON. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0U; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - - /* Enable PWR RCC Clock Peripheral */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - /* Disable the main PLL */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Enable the main PLL */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Enables Main Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_EnableMainRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables Main Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xxdevices. - * @retval None - */ -void HAL_PWREx_DisableMainRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE; -} - -/** - * @brief Enables Low Power Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_EnableLowRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables Low Power Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_DisableLowRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE; -} - -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Activates the Over-Drive mode. - * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void) -{ - uint32_t tickstart = 0U; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable the Over-drive to extend the clock frequency to 180 Mhz */ - __HAL_PWR_OVERDRIVE_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Enable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Deactivates the Over-Drive mode. - * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void) -{ - uint32_t tickstart = 0U; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Disable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Disable the Over-drive */ - __HAL_PWR_OVERDRIVE_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Enters in Under-Drive STOP mode. - * - * @note This mode is only available for STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * - * @note This mode can be selected only when the Under-Drive is already active - * - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode - * - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * - * @note When exiting Stop mode by issuing an interrupt or a wake-up event, - * the HSI RC oscillator is selected as system clock. - * - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * - * @param Regulator specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction - * @retval None - */ -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the Under-drive Mode ---------------------------------------------*/ - /* Clear Under-drive flag */ - __HAL_PWR_CLEAR_ODRUDR_FLAG(); - - /* Enable the Under-drive */ - __HAL_PWR_UNDERDRIVE_ENABLE(); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg1 = PWR->CR; - /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */ - tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS); - - /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */ - tmpreg1 |= Regulator; - - /* Store the new value */ - PWR->CR = tmpreg1; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Select STOP mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); - - return HAL_OK; -} - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c deleted file mode 100644 index a3326f2..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c +++ /dev/null @@ -1,2915 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_qspi.c - * @author MCD Application Team - * @brief QSPI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the QuadSPI interface (QSPI). - * + Initialization and de-initialization functions - * + Indirect functional mode management - * + Memory-mapped functional mode management - * + Auto-polling functional mode management - * + Interrupts and flags management - * + DMA channel configuration for indirect functional mode - * + Errors management and abort functionality - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - *** Initialization *** - ====================== - [..] - (#) As prerequisite, fill in the HAL_QSPI_MspInit() : - (++) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE(). - (++) Reset QuadSPI Peripheral with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET(). - (++) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). - (++) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init(). - (++) If interrupt mode is used, enable and configure QuadSPI global - interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). - (++) If DMA mode is used, enable the clocks for the QuadSPI DMA channel - with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(), - link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure - DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). - (#) Configure the flash size, the clock prescaler, the fifo threshold, the - clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function. - - *** Indirect functional mode *** - ================================ - [..] - (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT() - functions : - (++) Instruction phase : the mode used and if present the instruction opcode. - (++) Address phase : the mode used and if present the size and the address value. - (++) Alternate-bytes phase : the mode used and if present the size and the alternate - bytes values. - (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). - (++) Data phase : the mode used and if present the number of bytes. - (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay - if activated. - (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. - (#) If no data is required for the command, it is sent directly to the memory : - (++) In polling mode, the output of the function is done when the transfer is complete. - (++) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete. - (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or - HAL_QSPI_Transmit_IT() after the command configuration : - (++) In polling mode, the output of the function is done when the transfer is complete. - (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold - is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete. - (++) In DMA mode, HAL_QSPI_TxHalfCpltCallback() will be called at the half transfer and - HAL_QSPI_TxCpltCallback() will be called when the transfer is complete. - (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or - HAL_QSPI_Receive_IT() after the command configuration : - (++) In polling mode, the output of the function is done when the transfer is complete. - (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold - is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete. - (++) In DMA mode, HAL_QSPI_RxHalfCpltCallback() will be called at the half transfer and - HAL_QSPI_RxCpltCallback() will be called when the transfer is complete. - - *** Auto-polling functional mode *** - ==================================== - [..] - (#) Configure the command sequence and the auto-polling functional mode using the - HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions : - (++) Instruction phase : the mode used and if present the instruction opcode. - (++) Address phase : the mode used and if present the size and the address value. - (++) Alternate-bytes phase : the mode used and if present the size and the alternate - bytes values. - (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). - (++) Data phase : the mode used. - (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay - if activated. - (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. - (++) The size of the status bytes, the match value, the mask used, the match mode (OR/AND), - the polling interval and the automatic stop activation. - (#) After the configuration : - (++) In polling mode, the output of the function is done when the status match is reached. The - automatic stop is activated to avoid an infinite loop. - (++) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached. - - *** Memory-mapped functional mode *** - ===================================== - [..] - (#) Configure the command sequence and the memory-mapped functional mode using the - HAL_QSPI_MemoryMapped() functions : - (++) Instruction phase : the mode used and if present the instruction opcode. - (++) Address phase : the mode used and the size. - (++) Alternate-bytes phase : the mode used and if present the size and the alternate - bytes values. - (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). - (++) Data phase : the mode used. - (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay - if activated. - (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. - (++) The timeout activation and the timeout period. - (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on - the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires. - - *** Errors management and abort functionality *** - ================================================= - [..] - (#) HAL_QSPI_GetError() function gives the error raised during the last operation. - (#) HAL_QSPI_Abort() and HAL_QSPI_Abort_IT() functions aborts any on-going operation and - flushes the fifo : - (++) In polling mode, the output of the function is done when the transfer - complete bit is set and the busy bit cleared. - (++) In interrupt mode, HAL_QSPI_AbortCpltCallback() will be called when - the transfer complete bit is set. - - *** Control functions *** - ========================= - [..] - (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver. - (#) HAL_QSPI_SetTimeout() function configures the timeout value used in the driver. - (#) HAL_QSPI_SetFifoThreshold() function configures the threshold on the Fifo of the QSPI IP. - (#) HAL_QSPI_GetFifoThreshold() function gives the current of the Fifo's threshold - (#) HAL_QSPI_SetFlashID() function configures the index of the flash memory to be accessed. - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_QSPI_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - Use Functions HAL_QSPI_RegisterCallback() to register a user callback, - it allows to register following callbacks: - (+) ErrorCallback : callback when error occurs. - (+) AbortCpltCallback : callback when abort is completed. - (+) FifoThresholdCallback : callback when the fifo threshold is reached. - (+) CmdCpltCallback : callback when a command without data is completed. - (+) RxCpltCallback : callback when a reception transfer is completed. - (+) TxCpltCallback : callback when a transmission transfer is completed. - (+) RxHalfCpltCallback : callback when half of the reception transfer is completed. - (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed. - (+) StatusMatchCallback : callback when a status match occurs. - (+) TimeOutCallback : callback when the timeout perioed expires. - (+) MspInitCallback : QSPI MspInit. - (+) MspDeInitCallback : QSPI MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - Use function HAL_QSPI_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. It allows to reset following callbacks: - (+) ErrorCallback : callback when error occurs. - (+) AbortCpltCallback : callback when abort is completed. - (+) FifoThresholdCallback : callback when the fifo threshold is reached. - (+) CmdCpltCallback : callback when a command without data is completed. - (+) RxCpltCallback : callback when a reception transfer is completed. - (+) TxCpltCallback : callback when a transmission transfer is completed. - (+) RxHalfCpltCallback : callback when half of the reception transfer is completed. - (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed. - (+) StatusMatchCallback : callback when a status match occurs. - (+) TimeOutCallback : callback when the timeout perioed expires. - (+) MspInitCallback : QSPI MspInit. - (+) MspDeInitCallback : QSPI MspDeInit. - This function) takes as parameters the HAL peripheral handle and the Callback ID. - - By default, after the HAL_QSPI_Init and if the state is HAL_QSPI_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions. - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_QSPI_Init - and HAL_QSPI_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_QSPI_Init and HAL_QSPI_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) - - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_QSPI_RegisterCallback before calling HAL_QSPI_DeInit - or HAL_QSPI_Init function. - - When The compilation define USE_HAL_QSPI_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - *** Workarounds linked to Silicon Limitation *** - ==================================================== - [..] - (#) Workarounds Implemented inside HAL Driver - (++) Extra data written in the FIFO at the end of a read transfer - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -#if defined(QUADSPI) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup QSPI QSPI - * @brief QSPI HAL module driver - * @{ - */ -#ifdef HAL_QSPI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ - -/* Private define ------------------------------------------------------------*/ -/** @defgroup QSPI_Private_Constants QSPI Private Constants - * @{ - */ -#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE 0x00000000U /*!Instance)); - assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler)); - assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold)); - assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting)); - assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize)); - assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime)); - assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode)); - assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash)); - - if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE ) - { - assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID)); - } - - if(hqspi->State == HAL_QSPI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hqspi->Lock = HAL_UNLOCKED; - -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - /* Reset Callback pointers in HAL_QSPI_STATE_RESET only */ - hqspi->ErrorCallback = HAL_QSPI_ErrorCallback; - hqspi->AbortCpltCallback = HAL_QSPI_AbortCpltCallback; - hqspi->FifoThresholdCallback = HAL_QSPI_FifoThresholdCallback; - hqspi->CmdCpltCallback = HAL_QSPI_CmdCpltCallback; - hqspi->RxCpltCallback = HAL_QSPI_RxCpltCallback; - hqspi->TxCpltCallback = HAL_QSPI_TxCpltCallback; - hqspi->RxHalfCpltCallback = HAL_QSPI_RxHalfCpltCallback; - hqspi->TxHalfCpltCallback = HAL_QSPI_TxHalfCpltCallback; - hqspi->StatusMatchCallback = HAL_QSPI_StatusMatchCallback; - hqspi->TimeOutCallback = HAL_QSPI_TimeOutCallback; - - if(hqspi->MspInitCallback == NULL) - { - hqspi->MspInitCallback = HAL_QSPI_MspInit; - } - - /* Init the low level hardware */ - hqspi->MspInitCallback(hqspi); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_QSPI_MspInit(hqspi); -#endif - - /* Configure the default timeout for the QSPI memory access */ - HAL_QSPI_SetTimeout(hqspi, HAL_QSPI_TIMEOUT_DEFAULT_VALUE); - } - - /* Configure QSPI FIFO Threshold */ - MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, - ((hqspi->Init.FifoThreshold - 1U) << QUADSPI_CR_FTHRES_Pos)); - - /* Wait till BUSY flag reset */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); - - if(status == HAL_OK) - { - /* Configure QSPI Clock Prescaler and Sample Shift */ - MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), - ((hqspi->Init.ClockPrescaler << QUADSPI_CR_PRESCALER_Pos) | - hqspi->Init.SampleShifting | hqspi->Init.FlashID | hqspi->Init.DualFlash)); - - /* Configure QSPI Flash Size, CS High Time and Clock Mode */ - MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE), - ((hqspi->Init.FlashSize << QUADSPI_DCR_FSIZE_Pos) | - hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode)); - - /* Enable the QSPI peripheral */ - __HAL_QSPI_ENABLE(hqspi); - - /* Set QSPI error code to none */ - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Initialize the QSPI state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - - /* Release Lock */ - __HAL_UNLOCK(hqspi); - - /* Return function status */ - return status; -} - -/** - * @brief De-Initialize the QSPI peripheral. - * @param hqspi QSPI handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi) -{ - /* Check the QSPI handle allocation */ - if(hqspi == NULL) - { - return HAL_ERROR; - } - - /* Disable the QSPI Peripheral Clock */ - __HAL_QSPI_DISABLE(hqspi); - -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - if(hqspi->MspDeInitCallback == NULL) - { - hqspi->MspDeInitCallback = HAL_QSPI_MspDeInit; - } - - /* DeInit the low level hardware */ - hqspi->MspDeInitCallback(hqspi); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_QSPI_MspDeInit(hqspi); -#endif - - /* Set QSPI error code to none */ - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Initialize the QSPI state */ - hqspi->State = HAL_QSPI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hqspi); - - return HAL_OK; -} - -/** - * @brief Initialize the QSPI MSP. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_QSPI_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the QSPI MSP. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_QSPI_MspDeInit can be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup QSPI_Exported_Functions_Group2 Input and Output operation functions - * @brief QSPI Transmit/Receive functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to : - (+) Handle the interrupts. - (+) Handle the command sequence. - (+) Transmit data in blocking, interrupt or DMA mode. - (+) Receive data in blocking, interrupt or DMA mode. - (+) Manage the auto-polling functional mode. - (+) Manage the memory-mapped functional mode. - -@endverbatim - * @{ - */ - -/** - * @brief Handle QSPI interrupt request. - * @param hqspi QSPI handle - * @retval None - */ -void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi) -{ - __IO uint32_t *data_reg; - uint32_t flag = READ_REG(hqspi->Instance->SR); - uint32_t itsource = READ_REG(hqspi->Instance->CR); - - /* QSPI Fifo Threshold interrupt occurred ----------------------------------*/ - if(((flag & QSPI_FLAG_FT) != 0U) && ((itsource & QSPI_IT_FT) != 0U)) - { - data_reg = &hqspi->Instance->DR; - - if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX) - { - /* Transmission process */ - while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != RESET) - { - if (hqspi->TxXferCount > 0U) - { - /* Fill the FIFO until the threshold is reached */ - *((__IO uint8_t *)data_reg) = *hqspi->pTxBuffPtr; - hqspi->pTxBuffPtr++; - hqspi->TxXferCount--; - } - else - { - /* No more data available for the transfer */ - /* Disable the QSPI FIFO Threshold Interrupt */ - __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT); - break; - } - } - } - else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX) - { - /* Receiving Process */ - while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != RESET) - { - if (hqspi->RxXferCount > 0U) - { - /* Read the FIFO until the threshold is reached */ - *hqspi->pRxBuffPtr = *((__IO uint8_t *)data_reg); - hqspi->pRxBuffPtr++; - hqspi->RxXferCount--; - } - else - { - /* All data have been received for the transfer */ - /* Disable the QSPI FIFO Threshold Interrupt */ - __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT); - break; - } - } - } - else - { - /* Nothing to do */ - } - - /* FIFO Threshold callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->FifoThresholdCallback(hqspi); -#else - HAL_QSPI_FifoThresholdCallback(hqspi); -#endif - } - - /* QSPI Transfer Complete interrupt occurred -------------------------------*/ - else if(((flag & QSPI_FLAG_TC) != 0U) && ((itsource & QSPI_IT_TC) != 0U)) - { - /* Clear interrupt */ - WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TC); - - /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */ - __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT); - - /* Transfer complete callback */ - if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX) - { - if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) - { - /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */ - CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Disable the DMA channel */ - __HAL_DMA_DISABLE(hqspi->hdma); - } - - /* Clear Busy bit */ - HAL_QSPI_Abort_IT(hqspi); - - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* TX Complete callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->TxCpltCallback(hqspi); -#else - HAL_QSPI_TxCpltCallback(hqspi); -#endif - } - else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX) - { - if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) - { - /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */ - CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Disable the DMA channel */ - __HAL_DMA_DISABLE(hqspi->hdma); - } - else - { - data_reg = &hqspi->Instance->DR; - while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0U) - { - if (hqspi->RxXferCount > 0U) - { - /* Read the last data received in the FIFO until it is empty */ - *hqspi->pRxBuffPtr = *((__IO uint8_t *)data_reg); - hqspi->pRxBuffPtr++; - hqspi->RxXferCount--; - } - else - { - /* All data have been received for the transfer */ - break; - } - } - } - - /* Workaround - Extra data written in the FIFO at the end of a read transfer */ - HAL_QSPI_Abort_IT(hqspi); - - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* RX Complete callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->RxCpltCallback(hqspi); -#else - HAL_QSPI_RxCpltCallback(hqspi); -#endif - } - else if(hqspi->State == HAL_QSPI_STATE_BUSY) - { - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* Command Complete callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->CmdCpltCallback(hqspi); -#else - HAL_QSPI_CmdCpltCallback(hqspi); -#endif - } - else if(hqspi->State == HAL_QSPI_STATE_ABORT) - { - /* Reset functional mode configuration to indirect write mode by default */ - CLEAR_BIT(hqspi->Instance->CCR, QUADSPI_CCR_FMODE); - - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - if (hqspi->ErrorCode == HAL_QSPI_ERROR_NONE) - { - /* Abort called by the user */ - - /* Abort Complete callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->AbortCpltCallback(hqspi); -#else - HAL_QSPI_AbortCpltCallback(hqspi); -#endif - } - else - { - /* Abort due to an error (eg : DMA error) */ - - /* Error callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->ErrorCallback(hqspi); -#else - HAL_QSPI_ErrorCallback(hqspi); -#endif - } - } - else - { - /* Nothing to do */ - } - } - - /* QSPI Status Match interrupt occurred ------------------------------------*/ - else if(((flag & QSPI_FLAG_SM) != 0U) && ((itsource & QSPI_IT_SM) != 0U)) - { - /* Clear interrupt */ - WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_SM); - - /* Check if the automatic poll mode stop is activated */ - if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0U) - { - /* Disable the QSPI Transfer Error and Status Match Interrupts */ - __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE)); - - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - } - - /* Status match callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->StatusMatchCallback(hqspi); -#else - HAL_QSPI_StatusMatchCallback(hqspi); -#endif - } - - /* QSPI Transfer Error interrupt occurred ----------------------------------*/ - else if(((flag & QSPI_FLAG_TE) != 0U) && ((itsource & QSPI_IT_TE) != 0U)) - { - /* Clear interrupt */ - WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TE); - - /* Disable all the QSPI Interrupts */ - __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT); - - /* Set error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER; - - if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) - { - /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */ - CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Disable the DMA channel */ - hqspi->hdma->XferAbortCallback = QSPI_DMAAbortCplt; - if (HAL_DMA_Abort_IT(hqspi->hdma) != HAL_OK) - { - /* Set error code to DMA */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; - - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* Error callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->ErrorCallback(hqspi); -#else - HAL_QSPI_ErrorCallback(hqspi); -#endif - } - } - else - { - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* Error callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->ErrorCallback(hqspi); -#else - HAL_QSPI_ErrorCallback(hqspi); -#endif - } - } - - /* QSPI Timeout interrupt occurred -----------------------------------------*/ - else if(((flag & QSPI_FLAG_TO) != 0U) && ((itsource & QSPI_IT_TO) != 0U)) - { - /* Clear interrupt */ - WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TO); - - /* Timeout callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->TimeOutCallback(hqspi); -#else - HAL_QSPI_TimeOutCallback(hqspi); -#endif - } - - else - { - /* Nothing to do */ - } -} - -/** - * @brief Set the command configuration. - * @param hqspi QSPI handle - * @param cmd : structure that contains the command configuration information - * @param Timeout Timeout duration - * @note This function is used only in Indirect Read or Write Modes - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout) -{ - HAL_StatusTypeDef status; - uint32_t tickstart = HAL_GetTick(); - - /* Check the parameters */ - assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); - if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) - { - assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); - } - - assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); - } - - assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); - } - - assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); - assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); - - assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); - assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); - assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_BUSY; - - /* Wait till BUSY flag reset */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout); - - if (status == HAL_OK) - { - /* Call the configuration function */ - QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); - - if (cmd->DataMode == QSPI_DATA_NONE) - { - /* When there is no data phase, the transfer start as soon as the configuration is done - so wait until TC flag is set to go back in idle state */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout); - - if (status == HAL_OK) - { - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); - - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - } - else - { - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - } - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Return function status */ - return status; -} - -/** - * @brief Set the command configuration in interrupt mode. - * @param hqspi QSPI handle - * @param cmd structure that contains the command configuration information - * @note This function is used only in Indirect Read or Write Modes - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd) -{ - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); - if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) - { - assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); - } - - assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); - } - - assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); - } - - assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); - assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); - - assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); - assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); - assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_BUSY; - - /* Wait till BUSY flag reset */ - status = QSPI_WaitFlagStateUntilTimeout_CPUCycle(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout); - - if (status == HAL_OK) - { - if (cmd->DataMode == QSPI_DATA_NONE) - { - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC); - } - - /* Call the configuration function */ - QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); - - if (cmd->DataMode == QSPI_DATA_NONE) - { - /* When there is no data phase, the transfer start as soon as the configuration is done - so activate TC and TE interrupts */ - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI Transfer Error Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC); - } - else - { - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - status = HAL_BUSY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - - /* Return function status */ - return status; -} - -/** - * @brief Transmit an amount of data in blocking mode. - * @param hqspi QSPI handle - * @param pData pointer to data buffer - * @param Timeout Timeout duration - * @note This function is used only in Indirect Write Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tickstart = HAL_GetTick(); - __IO uint32_t *data_reg = &hqspi->Instance->DR; - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - if(pData != NULL ) - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX; - - /* Configure counters and size of the handle */ - hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->pTxBuffPtr = pData; - - /* Configure QSPI: CCR register with functional as indirect write */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); - - while(hqspi->TxXferCount > 0U) - { - /* Wait until FT flag is set to send data */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, tickstart, Timeout); - - if (status != HAL_OK) - { - break; - } - - *((__IO uint8_t *)data_reg) = *hqspi->pTxBuffPtr; - hqspi->pTxBuffPtr++; - hqspi->TxXferCount--; - } - - if (status == HAL_OK) - { - /* Wait until TC flag is set to go back in idle state */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout); - - if (status == HAL_OK) - { - /* Clear Transfer Complete bit */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); - - /* Clear Busy bit */ - status = HAL_QSPI_Abort(hqspi); - } - } - - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - else - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - } - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - return status; -} - - -/** - * @brief Receive an amount of data in blocking mode. - * @param hqspi QSPI handle - * @param pData pointer to data buffer - * @param Timeout Timeout duration - * @note This function is used only in Indirect Read Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tickstart = HAL_GetTick(); - uint32_t addr_reg = READ_REG(hqspi->Instance->AR); - __IO uint32_t *data_reg = &hqspi->Instance->DR; - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - if(pData != NULL ) - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX; - - /* Configure counters and size of the handle */ - hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->pRxBuffPtr = pData; - - /* Configure QSPI: CCR register with functional as indirect read */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); - - /* Start the transfer by re-writing the address in AR register */ - WRITE_REG(hqspi->Instance->AR, addr_reg); - - while(hqspi->RxXferCount > 0U) - { - /* Wait until FT or TC flag is set to read received data */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, tickstart, Timeout); - - if (status != HAL_OK) - { - break; - } - - *hqspi->pRxBuffPtr = *((__IO uint8_t *)data_reg); - hqspi->pRxBuffPtr++; - hqspi->RxXferCount--; - } - - if (status == HAL_OK) - { - /* Wait until TC flag is set to go back in idle state */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout); - - if (status == HAL_OK) - { - /* Clear Transfer Complete bit */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); - - /* Workaround - Extra data written in the FIFO at the end of a read transfer */ - status = HAL_QSPI_Abort(hqspi); - } - } - - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - else - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - } - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - return status; -} - -/** - * @brief Send an amount of data in non-blocking mode with interrupt. - * @param hqspi QSPI handle - * @param pData pointer to data buffer - * @note This function is used only in Indirect Write Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - if(pData != NULL ) - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX; - - /* Configure counters and size of the handle */ - hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->pTxBuffPtr = pData; - - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC); - - /* Configure QSPI: CCR register with functional as indirect write */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC); - } - else - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - status = HAL_BUSY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - - return status; -} - -/** - * @brief Receive an amount of data in non-blocking mode with interrupt. - * @param hqspi QSPI handle - * @param pData pointer to data buffer - * @note This function is used only in Indirect Read Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t addr_reg = READ_REG(hqspi->Instance->AR); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - if(pData != NULL ) - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX; - - /* Configure counters and size of the handle */ - hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; - hqspi->pRxBuffPtr = pData; - - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC); - - /* Configure QSPI: CCR register with functional as indirect read */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); - - /* Start the transfer by re-writing the address in AR register */ - WRITE_REG(hqspi->Instance->AR, addr_reg); - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC); - } - else - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - status = HAL_BUSY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - - return status; -} - -/** - * @brief Send an amount of data in non-blocking mode with DMA. - * @param hqspi QSPI handle - * @param pData pointer to data buffer - * @note This function is used only in Indirect Write Mode - * @note If DMA peripheral access is configured as halfword, the number - * of data and the fifo threshold should be aligned on halfword - * @note If DMA peripheral access is configured as word, the number - * of data and the fifo threshold should be aligned on word - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1U); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - /* Clear the error code */ - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - if(pData != NULL ) - { - /* Configure counters of the handle */ - if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE) - { - hqspi->TxXferCount = data_size; - } - else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_HALFWORD) - { - if (((data_size % 2U) != 0U) || ((hqspi->Init.FifoThreshold % 2U) != 0U)) - { - /* The number of data or the fifo threshold is not aligned on halfword - => no transfer possible with DMA peripheral access configured as halfword */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - else - { - hqspi->TxXferCount = (data_size >> 1U); - } - } - else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_WORD) - { - if (((data_size % 4U) != 0U) || ((hqspi->Init.FifoThreshold % 4U) != 0U)) - { - /* The number of data or the fifo threshold is not aligned on word - => no transfer possible with DMA peripheral access configured as word */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - else - { - hqspi->TxXferCount = (data_size >> 2U); - } - } - else - { - /* Nothing to do */ - } - - if (status == HAL_OK) - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX; - - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC)); - - /* Configure size and pointer of the handle */ - hqspi->TxXferSize = hqspi->TxXferCount; - hqspi->pTxBuffPtr = pData; - - /* Configure QSPI: CCR register with functional mode as indirect write */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); - - /* Set the QSPI DMA transfer complete callback */ - hqspi->hdma->XferCpltCallback = QSPI_DMATxCplt; - - /* Set the QSPI DMA Half transfer complete callback */ - hqspi->hdma->XferHalfCpltCallback = QSPI_DMATxHalfCplt; - - /* Set the DMA error callback */ - hqspi->hdma->XferErrorCallback = QSPI_DMAError; - - /* Clear the DMA abort callback */ - hqspi->hdma->XferAbortCallback = NULL; - -#if defined (QSPI1_V2_1L) - /* Bug "ES0305 section 2.1.8 In some specific cases, DMA2 data corruption occurs when managing - AHB and APB2 peripherals in a concurrent way" Workaround Implementation: - Change the following configuration of DMA peripheral - - Enable peripheral increment - - Disable memory increment - - Set DMA direction as peripheral to memory mode */ - - /* Enable peripheral increment mode of the DMA */ - hqspi->hdma->Init.PeriphInc = DMA_PINC_ENABLE; - - /* Disable memory increment mode of the DMA */ - hqspi->hdma->Init.MemInc = DMA_MINC_DISABLE; - - /* Update peripheral/memory increment mode bits */ - MODIFY_REG(hqspi->hdma->Instance->CR, (DMA_SxCR_MINC | DMA_SxCR_PINC), (hqspi->hdma->Init.MemInc | hqspi->hdma->Init.PeriphInc)); - - /* Configure the direction of the DMA */ - hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY; -#else - /* Configure the direction of the DMA */ - hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH; -#endif /* QSPI1_V2_1L */ - - /* Update direction mode bit */ - MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction); - - /* Enable the QSPI transmit DMA Channel */ - if (HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)pData, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize) == HAL_OK) - { - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI transfer error Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE); - - /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */ - SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - } - else - { - status = HAL_ERROR; - hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; - hqspi->State = HAL_QSPI_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - } - else - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - status = HAL_BUSY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - - return status; -} - -/** - * @brief Receive an amount of data in non-blocking mode with DMA. - * @param hqspi QSPI handle - * @param pData pointer to data buffer. - * @note This function is used only in Indirect Read Mode - * @note If DMA peripheral access is configured as halfword, the number - * of data and the fifo threshold should be aligned on halfword - * @note If DMA peripheral access is configured as word, the number - * of data and the fifo threshold should be aligned on word - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t addr_reg = READ_REG(hqspi->Instance->AR); - uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1U); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - /* Clear the error code */ - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - if(pData != NULL ) - { - /* Configure counters of the handle */ - if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE) - { - hqspi->RxXferCount = data_size; - } - else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_HALFWORD) - { - if (((data_size % 2U) != 0U) || ((hqspi->Init.FifoThreshold % 2U) != 0U)) - { - /* The number of data or the fifo threshold is not aligned on halfword - => no transfer possible with DMA peripheral access configured as halfword */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - else - { - hqspi->RxXferCount = (data_size >> 1U); - } - } - else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_WORD) - { - if (((data_size % 4U) != 0U) || ((hqspi->Init.FifoThreshold % 4U) != 0U)) - { - /* The number of data or the fifo threshold is not aligned on word - => no transfer possible with DMA peripheral access configured as word */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - else - { - hqspi->RxXferCount = (data_size >> 2U); - } - } - else - { - /* Nothing to do */ - } - - if (status == HAL_OK) - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX; - - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC)); - - /* Configure size and pointer of the handle */ - hqspi->RxXferSize = hqspi->RxXferCount; - hqspi->pRxBuffPtr = pData; - - /* Set the QSPI DMA transfer complete callback */ - hqspi->hdma->XferCpltCallback = QSPI_DMARxCplt; - - /* Set the QSPI DMA Half transfer complete callback */ - hqspi->hdma->XferHalfCpltCallback = QSPI_DMARxHalfCplt; - - /* Set the DMA error callback */ - hqspi->hdma->XferErrorCallback = QSPI_DMAError; - - /* Clear the DMA abort callback */ - hqspi->hdma->XferAbortCallback = NULL; - -#if defined (QSPI1_V2_1L) - /* Bug "ES0305 section 2.1.8 In some specific cases, DMA2 data corruption occurs when managing - AHB and APB2 peripherals in a concurrent way" Workaround Implementation: - Change the following configuration of DMA peripheral - - Enable peripheral increment - - Disable memory increment - - Set DMA direction as memory to peripheral mode - - 4 Extra words (32-bits) are added for read operation to guarantee - the last data is transferred from DMA FIFO to RAM memory */ - - /* Enable peripheral increment of the DMA */ - hqspi->hdma->Init.PeriphInc = DMA_PINC_ENABLE; - - /* Disable memory increment of the DMA */ - hqspi->hdma->Init.MemInc = DMA_MINC_DISABLE; - - /* Update peripheral/memory increment mode bits */ - MODIFY_REG(hqspi->hdma->Instance->CR, (DMA_SxCR_MINC | DMA_SxCR_PINC), (hqspi->hdma->Init.MemInc | hqspi->hdma->Init.PeriphInc)); - - /* Configure the direction of the DMA */ - hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH; - - /* 4 Extra words (32-bits) are needed for read operation to guarantee - the last data is transferred from DMA FIFO to RAM memory */ - WRITE_REG(hqspi->Instance->DLR, (data_size - 1U + 16U)); - - /* Update direction mode bit */ - MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction); - - /* Configure QSPI: CCR register with functional as indirect read */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); - - /* Start the transfer by re-writing the address in AR register */ - WRITE_REG(hqspi->Instance->AR, addr_reg); - - /* Enable the DMA Channel */ - if(HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, (uint32_t)pData, hqspi->RxXferSize) == HAL_OK) - { - /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */ - SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI transfer error Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE); - } - else - { - status = HAL_ERROR; - hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; - hqspi->State = HAL_QSPI_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } -#else - /* Configure the direction of the DMA */ - hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY; - - /* Update direction mode bit */ - MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction); - - /* Enable the DMA Channel */ - if(HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, (uint32_t)pData, hqspi->RxXferSize)== HAL_OK) - { - /* Configure QSPI: CCR register with functional as indirect read */ - MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); - - /* Start the transfer by re-writing the address in AR register */ - WRITE_REG(hqspi->Instance->AR, addr_reg); - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI transfer error Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE); - - /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */ - SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - } - else - { - status = HAL_ERROR; - hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; - hqspi->State = HAL_QSPI_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } -#endif /* QSPI1_V2_1L */ - } - } - else - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; - status = HAL_ERROR; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - status = HAL_BUSY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - - return status; -} - -/** - * @brief Configure the QSPI Automatic Polling Mode in blocking mode. - * @param hqspi QSPI handle - * @param cmd structure that contains the command configuration information. - * @param cfg structure that contains the polling configuration information. - * @param Timeout Timeout duration - * @note This function is used only in Automatic Polling Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout) -{ - HAL_StatusTypeDef status; - uint32_t tickstart = HAL_GetTick(); - - /* Check the parameters */ - assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); - if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) - { - assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); - } - - assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); - } - - assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); - } - - assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); - assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); - - assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); - assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); - assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); - - assert_param(IS_QSPI_INTERVAL(cfg->Interval)); - assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize)); - assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode)); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING; - - /* Wait till BUSY flag reset */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout); - - if (status == HAL_OK) - { - /* Configure QSPI: PSMAR register with the status match value */ - WRITE_REG(hqspi->Instance->PSMAR, cfg->Match); - - /* Configure QSPI: PSMKR register with the status mask value */ - WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask); - - /* Configure QSPI: PIR register with the interval value */ - WRITE_REG(hqspi->Instance->PIR, cfg->Interval); - - /* Configure QSPI: CR register with Match mode and Automatic stop enabled - (otherwise there will be an infinite loop in blocking mode) */ - MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS), - (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE)); - - /* Call the configuration function */ - cmd->NbData = cfg->StatusBytesSize; - QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING); - - /* Wait until SM flag is set to go back in idle state */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, tickstart, Timeout); - - if (status == HAL_OK) - { - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM); - - /* Update state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - } - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Return function status */ - return status; -} - -/** - * @brief Configure the QSPI Automatic Polling Mode in non-blocking mode. - * @param hqspi QSPI handle - * @param cmd structure that contains the command configuration information. - * @param cfg structure that contains the polling configuration information. - * @note This function is used only in Automatic Polling Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg) -{ - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); - if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) - { - assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); - } - - assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); - } - - assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); - } - - assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); - assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); - - assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); - assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); - assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); - - assert_param(IS_QSPI_INTERVAL(cfg->Interval)); - assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize)); - assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode)); - assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop)); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING; - - /* Wait till BUSY flag reset */ - status = QSPI_WaitFlagStateUntilTimeout_CPUCycle(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout); - - if (status == HAL_OK) - { - /* Configure QSPI: PSMAR register with the status match value */ - WRITE_REG(hqspi->Instance->PSMAR, cfg->Match); - - /* Configure QSPI: PSMKR register with the status mask value */ - WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask); - - /* Configure QSPI: PIR register with the interval value */ - WRITE_REG(hqspi->Instance->PIR, cfg->Interval); - - /* Configure QSPI: CR register with Match mode and Automatic stop mode */ - MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS), - (cfg->MatchMode | cfg->AutomaticStop)); - - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_SM); - - /* Call the configuration function */ - cmd->NbData = cfg->StatusBytesSize; - QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING); - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Enable the QSPI Transfer Error and status match Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE)); - - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - } - else - { - status = HAL_BUSY; - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - } - - /* Return function status */ - return status; -} - -/** - * @brief Configure the Memory Mapped mode. - * @param hqspi QSPI handle - * @param cmd structure that contains the command configuration information. - * @param cfg structure that contains the memory mapped configuration information. - * @note This function is used only in Memory mapped Mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg) -{ - HAL_StatusTypeDef status; - uint32_t tickstart = HAL_GetTick(); - - /* Check the parameters */ - assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); - if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) - { - assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); - } - - assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); - } - - assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); - } - - assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); - assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); - - assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); - assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); - assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); - - assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation)); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; - - /* Update state */ - hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED; - - /* Wait till BUSY flag reset */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); - - if (status == HAL_OK) - { - /* Configure QSPI: CR register with timeout counter enable */ - MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation); - - if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE) - { - assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod)); - - /* Configure QSPI: LPTR register with the low-power timeout value */ - WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod); - - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO); - - /* Enable the QSPI TimeOut Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO); - } - - /* Call the configuration function */ - QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED); - } - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Return function status */ - return status; -} - -/** - * @brief Transfer Error callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_QSPI_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief Abort completed callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_AbortCpltCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_QSPI_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Command completed callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_QSPI_CmdCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_QSPI_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx Transfer completed callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_QSPI_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Half Transfer completed callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_RxHalfCpltCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_QSPI_RxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_TxHalfCpltCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_QSPI_TxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief FIFO Threshold callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file - */ -} - -/** - * @brief Status Match callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_QSPI_StatusMatchCallback could be implemented in the user file - */ -} - -/** - * @brief Timeout callback. - * @param hqspi QSPI handle - * @retval None - */ -__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hqspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_QSPI_TimeOutCallback could be implemented in the user file - */ -} -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User QSPI Callback - * To be used instead of the weak (surcharged) predefined callback - * @param hqspi QSPI handle - * @param CallbackId ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_QSPI_ERROR_CB_ID QSPI Error Callback ID - * @arg @ref HAL_QSPI_ABORT_CB_ID QSPI Abort Callback ID - * @arg @ref HAL_QSPI_FIFO_THRESHOLD_CB_ID QSPI FIFO Threshold Callback ID - * @arg @ref HAL_QSPI_CMD_CPLT_CB_ID QSPI Command Complete Callback ID - * @arg @ref HAL_QSPI_RX_CPLT_CB_ID QSPI Rx Complete Callback ID - * @arg @ref HAL_QSPI_TX_CPLT_CB_ID QSPI Tx Complete Callback ID - * @arg @ref HAL_QSPI_RX_HALF_CPLT_CB_ID QSPI Rx Half Complete Callback ID - * @arg @ref HAL_QSPI_TX_HALF_CPLT_CB_ID QSPI Tx Half Complete Callback ID - * @arg @ref HAL_QSPI_STATUS_MATCH_CB_ID QSPI Status Match Callback ID - * @arg @ref HAL_QSPI_TIMEOUT_CB_ID QSPI Timeout Callback ID - * @arg @ref HAL_QSPI_MSP_INIT_CB_ID QSPI MspInit callback ID - * @arg @ref HAL_QSPI_MSP_DEINIT_CB_ID QSPI MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_QSPI_RegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId, pQSPI_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(pCallback == NULL) - { - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - switch (CallbackId) - { - case HAL_QSPI_ERROR_CB_ID : - hqspi->ErrorCallback = pCallback; - break; - case HAL_QSPI_ABORT_CB_ID : - hqspi->AbortCpltCallback = pCallback; - break; - case HAL_QSPI_FIFO_THRESHOLD_CB_ID : - hqspi->FifoThresholdCallback = pCallback; - break; - case HAL_QSPI_CMD_CPLT_CB_ID : - hqspi->CmdCpltCallback = pCallback; - break; - case HAL_QSPI_RX_CPLT_CB_ID : - hqspi->RxCpltCallback = pCallback; - break; - case HAL_QSPI_TX_CPLT_CB_ID : - hqspi->TxCpltCallback = pCallback; - break; - case HAL_QSPI_RX_HALF_CPLT_CB_ID : - hqspi->RxHalfCpltCallback = pCallback; - break; - case HAL_QSPI_TX_HALF_CPLT_CB_ID : - hqspi->TxHalfCpltCallback = pCallback; - break; - case HAL_QSPI_STATUS_MATCH_CB_ID : - hqspi->StatusMatchCallback = pCallback; - break; - case HAL_QSPI_TIMEOUT_CB_ID : - hqspi->TimeOutCallback = pCallback; - break; - case HAL_QSPI_MSP_INIT_CB_ID : - hqspi->MspInitCallback = pCallback; - break; - case HAL_QSPI_MSP_DEINIT_CB_ID : - hqspi->MspDeInitCallback = pCallback; - break; - default : - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (hqspi->State == HAL_QSPI_STATE_RESET) - { - switch (CallbackId) - { - case HAL_QSPI_MSP_INIT_CB_ID : - hqspi->MspInitCallback = pCallback; - break; - case HAL_QSPI_MSP_DEINIT_CB_ID : - hqspi->MspDeInitCallback = pCallback; - break; - default : - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hqspi); - return status; -} - -/** - * @brief Unregister a User QSPI Callback - * QSPI Callback is redirected to the weak (surcharged) predefined callback - * @param hqspi QSPI handle - * @param CallbackId ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_QSPI_ERROR_CB_ID QSPI Error Callback ID - * @arg @ref HAL_QSPI_ABORT_CB_ID QSPI Abort Callback ID - * @arg @ref HAL_QSPI_FIFO_THRESHOLD_CB_ID QSPI FIFO Threshold Callback ID - * @arg @ref HAL_QSPI_CMD_CPLT_CB_ID QSPI Command Complete Callback ID - * @arg @ref HAL_QSPI_RX_CPLT_CB_ID QSPI Rx Complete Callback ID - * @arg @ref HAL_QSPI_TX_CPLT_CB_ID QSPI Tx Complete Callback ID - * @arg @ref HAL_QSPI_RX_HALF_CPLT_CB_ID QSPI Rx Half Complete Callback ID - * @arg @ref HAL_QSPI_TX_HALF_CPLT_CB_ID QSPI Tx Half Complete Callback ID - * @arg @ref HAL_QSPI_STATUS_MATCH_CB_ID QSPI Status Match Callback ID - * @arg @ref HAL_QSPI_TIMEOUT_CB_ID QSPI Timeout Callback ID - * @arg @ref HAL_QSPI_MSP_INIT_CB_ID QSPI MspInit callback ID - * @arg @ref HAL_QSPI_MSP_DEINIT_CB_ID QSPI MspDeInit callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_QSPI_UnRegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - switch (CallbackId) - { - case HAL_QSPI_ERROR_CB_ID : - hqspi->ErrorCallback = HAL_QSPI_ErrorCallback; - break; - case HAL_QSPI_ABORT_CB_ID : - hqspi->AbortCpltCallback = HAL_QSPI_AbortCpltCallback; - break; - case HAL_QSPI_FIFO_THRESHOLD_CB_ID : - hqspi->FifoThresholdCallback = HAL_QSPI_FifoThresholdCallback; - break; - case HAL_QSPI_CMD_CPLT_CB_ID : - hqspi->CmdCpltCallback = HAL_QSPI_CmdCpltCallback; - break; - case HAL_QSPI_RX_CPLT_CB_ID : - hqspi->RxCpltCallback = HAL_QSPI_RxCpltCallback; - break; - case HAL_QSPI_TX_CPLT_CB_ID : - hqspi->TxCpltCallback = HAL_QSPI_TxCpltCallback; - break; - case HAL_QSPI_RX_HALF_CPLT_CB_ID : - hqspi->RxHalfCpltCallback = HAL_QSPI_RxHalfCpltCallback; - break; - case HAL_QSPI_TX_HALF_CPLT_CB_ID : - hqspi->TxHalfCpltCallback = HAL_QSPI_TxHalfCpltCallback; - break; - case HAL_QSPI_STATUS_MATCH_CB_ID : - hqspi->StatusMatchCallback = HAL_QSPI_StatusMatchCallback; - break; - case HAL_QSPI_TIMEOUT_CB_ID : - hqspi->TimeOutCallback = HAL_QSPI_TimeOutCallback; - break; - case HAL_QSPI_MSP_INIT_CB_ID : - hqspi->MspInitCallback = HAL_QSPI_MspInit; - break; - case HAL_QSPI_MSP_DEINIT_CB_ID : - hqspi->MspDeInitCallback = HAL_QSPI_MspDeInit; - break; - default : - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (hqspi->State == HAL_QSPI_STATE_RESET) - { - switch (CallbackId) - { - case HAL_QSPI_MSP_INIT_CB_ID : - hqspi->MspInitCallback = HAL_QSPI_MspInit; - break; - case HAL_QSPI_MSP_DEINIT_CB_ID : - hqspi->MspDeInitCallback = HAL_QSPI_MspDeInit; - break; - default : - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hqspi); - return status; -} -#endif - -/** - * @} - */ - -/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions - * @brief QSPI control and State functions - * -@verbatim - =============================================================================== - ##### Peripheral Control and State functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to : - (+) Check in run-time the state of the driver. - (+) Check the error code set during last operation. - (+) Abort any operation. - - -@endverbatim - * @{ - */ - -/** - * @brief Return the QSPI handle state. - * @param hqspi QSPI handle - * @retval HAL state - */ -HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi) -{ - /* Return QSPI handle state */ - return hqspi->State; -} - -/** -* @brief Return the QSPI error code. -* @param hqspi QSPI handle -* @retval QSPI Error Code -*/ -uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi) -{ - return hqspi->ErrorCode; -} - -/** -* @brief Abort the current transmission. -* @param hqspi QSPI handle -* @retval HAL status -*/ -HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tickstart = HAL_GetTick(); - - /* Check if the state is in one of the busy states */ - if (((uint32_t)hqspi->State & 0x2U) != 0U) - { - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) - { - /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */ - CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Abort DMA channel */ - status = HAL_DMA_Abort(hqspi->hdma); - if(status != HAL_OK) - { - hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; - } - } - - if (__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY) != RESET) - { - /* Configure QSPI: CR register with Abort request */ - SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT); - - /* Wait until TC flag is set to go back in idle state */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, hqspi->Timeout); - - if (status == HAL_OK) - { - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); - - /* Wait until BUSY flag is reset */ - status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); - } - - if (status == HAL_OK) - { - /* Reset functional mode configuration to indirect write mode by default */ - CLEAR_BIT(hqspi->Instance->CCR, QUADSPI_CCR_FMODE); - - /* Update state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - } - else - { - /* Update state */ - hqspi->State = HAL_QSPI_STATE_READY; - } - } - - return status; -} - -/** -* @brief Abort the current transmission (non-blocking function) -* @param hqspi QSPI handle -* @retval HAL status -*/ -HAL_StatusTypeDef HAL_QSPI_Abort_IT(QSPI_HandleTypeDef *hqspi) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check if the state is in one of the busy states */ - if (((uint32_t)hqspi->State & 0x2U) != 0U) - { - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Update QSPI state */ - hqspi->State = HAL_QSPI_STATE_ABORT; - - /* Disable all interrupts */ - __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_TO | QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TC | QSPI_IT_TE)); - - if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) - { - /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */ - CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Abort DMA channel */ - hqspi->hdma->XferAbortCallback = QSPI_DMAAbortCplt; - if (HAL_DMA_Abort_IT(hqspi->hdma) != HAL_OK) - { - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* Abort Complete callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->AbortCpltCallback(hqspi); -#else - HAL_QSPI_AbortCpltCallback(hqspi); -#endif - } - } - else - { - if (__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY) != RESET) - { - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); - - /* Enable the QSPI Transfer Complete Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); - - /* Configure QSPI: CR register with Abort request */ - SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT); - } - else - { - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - } - } - } - return status; -} - -/** @brief Set QSPI timeout. - * @param hqspi QSPI handle. - * @param Timeout Timeout for the QSPI memory access. - * @retval None - */ -void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout) -{ - hqspi->Timeout = Timeout; -} - -/** @brief Set QSPI Fifo threshold. - * @param hqspi QSPI handle. - * @param Threshold Threshold of the Fifo (value between 1 and 16). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - /* Synchronize init structure with new FIFO threshold value */ - hqspi->Init.FifoThreshold = Threshold; - - /* Configure QSPI FIFO Threshold */ - MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, - ((hqspi->Init.FifoThreshold - 1U) << QUADSPI_CR_FTHRES_Pos)); - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Return function status */ - return status; -} - -/** @brief Get QSPI Fifo threshold. - * @param hqspi QSPI handle. - * @retval Fifo threshold (value between 1 and 16) - */ -uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi) -{ - return ((READ_BIT(hqspi->Instance->CR, QUADSPI_CR_FTHRES) >> QUADSPI_CR_FTHRES_Pos) + 1U); -} - -/** @brief Set FlashID. - * @param hqspi QSPI handle. - * @param FlashID Index of the flash memory to be accessed. - * This parameter can be a value of @ref QSPI_Flash_Select. - * @note The FlashID is ignored when dual flash mode is enabled. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_QSPI_SetFlashID(QSPI_HandleTypeDef *hqspi, uint32_t FlashID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameter */ - assert_param(IS_QSPI_FLASH_ID(FlashID)); - - /* Process locked */ - __HAL_LOCK(hqspi); - - if(hqspi->State == HAL_QSPI_STATE_READY) - { - /* Synchronize init structure with new FlashID value */ - hqspi->Init.FlashID = FlashID; - - /* Configure QSPI FlashID */ - MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FSEL, FlashID); - } - else - { - status = HAL_BUSY; - } - - /* Process unlocked */ - __HAL_UNLOCK(hqspi); - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup QSPI_Private_Functions QSPI Private Functions - * @{ - */ - -/** - * @brief DMA QSPI receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma) -{ - QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)(hdma->Parent); - hqspi->RxXferCount = 0U; - - /* Enable the QSPI transfer complete Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); -} - -/** - * @brief DMA QSPI transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma) -{ - QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)(hdma->Parent); - hqspi->TxXferCount = 0U; - - /* Enable the QSPI transfer complete Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); -} - -/** - * @brief DMA QSPI receive process half complete callback. - * @param hdma DMA handle - * @retval None - */ -static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)(hdma->Parent); - -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->RxHalfCpltCallback(hqspi); -#else - HAL_QSPI_RxHalfCpltCallback(hqspi); -#endif -} - -/** - * @brief DMA QSPI transmit process half complete callback. - * @param hdma DMA handle - * @retval None - */ -static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)(hdma->Parent); - -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->TxHalfCpltCallback(hqspi); -#else - HAL_QSPI_TxHalfCpltCallback(hqspi); -#endif -} - -/** - * @brief DMA QSPI communication error callback. - * @param hdma DMA handle - * @retval None - */ -static void QSPI_DMAError(DMA_HandleTypeDef *hdma) -{ - QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )(hdma->Parent); - - /* if DMA error is FIFO error ignore it */ - if(HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) - { - hqspi->RxXferCount = 0U; - hqspi->TxXferCount = 0U; - hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; - - /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */ - CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); - - /* Abort the QSPI */ - (void)HAL_QSPI_Abort_IT(hqspi); - - } -} - -/** - * @brief DMA QSPI abort complete callback. - * @param hdma DMA handle - * @retval None - */ -static void QSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma) -{ - QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )(hdma->Parent); - - hqspi->RxXferCount = 0U; - hqspi->TxXferCount = 0U; - - if(hqspi->State == HAL_QSPI_STATE_ABORT) - { - /* DMA Abort called by QSPI abort */ - /* Clear interrupt */ - __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); - - /* Enable the QSPI Transfer Complete Interrupt */ - __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); - - /* Configure QSPI: CR register with Abort request */ - SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT); - } - else - { - /* DMA Abort called due to a transfer error interrupt */ - /* Change state of QSPI */ - hqspi->State = HAL_QSPI_STATE_READY; - - /* Error callback */ -#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) - hqspi->ErrorCallback(hqspi); -#else - HAL_QSPI_ErrorCallback(hqspi); -#endif - } -} - -/** - * @brief Wait for a flag state until timeout. - * @param hqspi QSPI handle - * @param Flag Flag checked - * @param State Value of the flag expected - * @param Tickstart Tick start value - * @param Timeout Duration of the timeout - * @retval HAL status - */ -static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, - FlagStatus State, uint32_t Tickstart, uint32_t Timeout) -{ - /* Wait until flag is in expected state */ - while((__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if(((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hqspi->State = HAL_QSPI_STATE_ERROR; - hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT; - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief Wait for a flag state until timeout using CPU cycle. - * @param hqspi : QSPI handle - * @param Flag : Flag checked - * @param State : Value of the flag expected - * @param Timeout : Duration of the timeout - * @retval HAL status - */ -static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout_CPUCycle(QSPI_HandleTypeDef *hqspi, uint32_t Flag, FlagStatus State, uint32_t Timeout) -{ - __IO uint32_t count = Timeout * (SystemCoreClock / 16U / 1000U); - do - { - if (count-- == 0U) - { - hqspi->State = HAL_QSPI_STATE_ERROR; - hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT; - return HAL_TIMEOUT; - } - } - while ((__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State); - - return HAL_OK; -} - -/** - * @brief Configure the communication registers. - * @param hqspi QSPI handle - * @param cmd structure that contains the command configuration information - * @param FunctionalMode functional mode to configured - * This parameter can be one of the following values: - * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode - * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode - * @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode - * @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode - * @retval None - */ -static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode) -{ - assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode)); - - if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)) - { - /* Configure QSPI: DLR register with the number of data to read or write */ - WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1U)); - } - - if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) - { - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - /* Configure QSPI: ABR register with alternate bytes value */ - WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes); - - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - /*---- Command with instruction, address and alternate bytes ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateBytesSize | cmd->AlternateByteMode | - cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode | - cmd->Instruction | FunctionalMode)); - - if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) - { - /* Configure QSPI: AR register with address value */ - WRITE_REG(hqspi->Instance->AR, cmd->Address); - } - } - else - { - /*---- Command with instruction and alternate bytes ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateBytesSize | cmd->AlternateByteMode | - cmd->AddressMode | cmd->InstructionMode | - cmd->Instruction | FunctionalMode)); - } - } - else - { - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - /*---- Command with instruction and address ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode | - cmd->InstructionMode | cmd->Instruction | FunctionalMode)); - - if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) - { - /* Configure QSPI: AR register with address value */ - WRITE_REG(hqspi->Instance->AR, cmd->Address); - } - } - else - { - /*---- Command with only instruction ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateByteMode | cmd->AddressMode | - cmd->InstructionMode | cmd->Instruction | FunctionalMode)); - } - } - } - else - { - if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) - { - /* Configure QSPI: ABR register with alternate bytes value */ - WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes); - - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - /*---- Command with address and alternate bytes ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateBytesSize | cmd->AlternateByteMode | - cmd->AddressSize | cmd->AddressMode | - cmd->InstructionMode | FunctionalMode)); - - if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) - { - /* Configure QSPI: AR register with address value */ - WRITE_REG(hqspi->Instance->AR, cmd->Address); - } - } - else - { - /*---- Command with only alternate bytes ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateBytesSize | cmd->AlternateByteMode | - cmd->AddressMode | cmd->InstructionMode | FunctionalMode)); - } - } - else - { - if (cmd->AddressMode != QSPI_ADDRESS_NONE) - { - /*---- Command with only address ----*/ - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateByteMode | cmd->AddressSize | - cmd->AddressMode | cmd->InstructionMode | FunctionalMode)); - - if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) - { - /* Configure QSPI: AR register with address value */ - WRITE_REG(hqspi->Instance->AR, cmd->Address); - } - } - else - { - /*---- Command with only data phase ----*/ - if (cmd->DataMode != QSPI_DATA_NONE) - { - /* Configure QSPI: CCR register with all communications parameters */ - WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | - cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | - cmd->AlternateByteMode | cmd->AddressMode | - cmd->InstructionMode | FunctionalMode)); - } - } - } - } -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_QSPI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(QUADSPI) */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c deleted file mode 100644 index 4edb46d..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c +++ /dev/null @@ -1,1124 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.c - * @author MCD Application Team - * @brief RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Reset and Clock Control (RCC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### RCC specific features ##### - ============================================================================== - [..] - After reset the device is running from Internal High Speed oscillator - (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache - and I-Cache are disabled, and all peripherals are off except internal - SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses; - all peripherals mapped on these busses are running at HSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in input floating state, except the JTAG pins which - are assigned to be used for debug purpose. - - [..] - Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals which clocks are not - derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) - - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle - after the clock enable bit is set on the hardware register - (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle - after the clock enable bit is set on the hardware register - - [..] - Implemented Workaround: - (+) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCC RCC - * @brief RCC HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup RCC_Private_Constants - * @{ - */ - -/* Private macro -------------------------------------------------------------*/ -#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define MCO1_GPIO_PORT GPIOA -#define MCO1_PIN GPIO_PIN_8 - -#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() -#define MCO2_GPIO_PORT GPIOC -#define MCO2_PIN GPIO_PIN_9 -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Variables RCC Private Variables - * @{ - */ -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the internal/external oscillators - (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 - and APB2). - - [..] Internal/external clock and PLL configuration - (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - - (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or - through the PLL as System clock source. Can be used also as RTC clock source. - - (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. - - (#) PLL (clocked by HSI or HSE), featuring two different output clocks: - (++) The first output is used to generate the high speed system clock (up to 168 MHz) - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). - - (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() - and if a HSE clock failure occurs(HSE used directly or through PLL as System - clock source), the System clocks automatically switched to HSI and an interrupt - is generated if enabled. The interrupt is linked to the Cortex-M4 NMI - (Non-Maskable Interrupt) exception vector. - - (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL - clock (through a configurable prescaler) on PA8 pin. - - (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S - clock (through a configurable prescaler) on PC9 pin. - - [..] System, AHB and APB busses clocks configuration - (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, - HSE and PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use - "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. - - (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum - frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices, - the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz, - PCLK2 84 MHz and PCLK1 42 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz, - PCLK2 100 MHz and PCLK1 50 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - -@endverbatim - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE and PLL OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - return HAL_OK; -} - -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this API. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this API. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - Set_Flag_If_Its_Expected(RCC_FLAG_HSERDY, 1); - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value. */ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - Set_Flag_If_Its_Expected(RCC_FLAG_PLLRDY, 1); - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ - WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ - RCC_OscInitStruct->PLL.PLLM | \ - (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ - (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ - (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - Clear_Flag_If_Its_Expected(RCC_FLAG_PLLRDY, 1); - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* Check if there is a request to disable the PLL used as System clock source */ - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) - { - return HAL_ERROR; - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->PLLCFGR; -#if defined (RCC_PLLCFGR_PLLR) - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) -#else - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) -#endif - { - return HAL_ERROR; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Initializes the CPU, AHB and APB busses clocks according to the specified - * parameters in the RCC_ClkInitStruct. - * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC peripheral. - * @param FLatency FLASH Latency, this parameter depend on device selected - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated by HAL_RCC_GetHCLKFreq() function called within this function - * - * @note The HSI is used (enabled by hardware) as system clock source after - * startup from Reset, wake-up from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after startup delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source will be ready. - * - * @note Depending on the device voltage range, the software has to set correctly - * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency - * (for more details refer to section above "Initialization/de-initialization functions") - * @retval None - */ -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) -{ - uint32_t tickstart; - - /* Check Null pointer */ - if(RCC_ClkInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); - assert_param(IS_FLASH_LATENCY(FLatency)); - - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. */ - - /* Increasing the number of wait states because of higher CPU frequency */ - if(FLatency > __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- HCLK Configuration --------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - /* Set the highest APBx dividers in order to ensure that we do not go through - a non-spec phase whatever we decrease or increase HCLK. */ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); - } - - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); - } - - assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - - /*------------------------- SYSCLK Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) - { - assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); - - /* HSE is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - /* Check the HSE ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - return HAL_ERROR; - } - } - /* PLL is selected as System Clock Source */ - else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) || - (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)) - { - /* Check the PLL ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - return HAL_ERROR; - } - } - /* HSI is selected as System Clock Source */ - else - { - /* Check the HSI ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - return HAL_ERROR; - } - } - - __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - RCC->CFGR = (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos); - while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Decreasing the number of wait states because of lower CPU frequency */ - if(FLatency < __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- PCLK1 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); - } - - /*-------------------------- PCLK2 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos]; - - /* Configure the source of time base considering new system clocks settings */ - HAL_InitTick (uwTickPrio); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions - * @brief RCC clocks control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - -@endverbatim - * @{ - */ - -/** - * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). - * @note PA8/PC9 should be configured in alternate function mode. - * @param RCC_MCOx specifies the output direction for the clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). - * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). - * @param RCC_MCOSource specifies the clock source to output. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx - * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param RCC_MCODiv specifies the MCOx prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have - * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5). - * @retval None - */ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) -{ - GPIO_InitTypeDef GPIO_InitStruct; - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCOx)); - assert_param(IS_RCC_MCODIV(RCC_MCODiv)); - /* RCC_MCO1 */ - if(RCC_MCOx == RCC_MCO1) - { - assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - - /* MCO1 Clock Enable */ - __MCO1_CLK_ENABLE(); - - /* Configure the MCO1 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO1_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); - - /* This RCC MCO1 enable feature is available only on STM32F410xx devices */ -#if defined(RCC_CFGR_MCO1EN) - __HAL_RCC_MCO1_ENABLE(); -#endif /* RCC_CFGR_MCO1EN */ - } -#if defined(RCC_CFGR_MCO2) - else - { - assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); - - /* MCO2 Clock Enable */ - __MCO2_CLK_ENABLE(); - - /* Configure the MCO2 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO2_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U))); - - /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */ -#if defined(RCC_CFGR_MCO2EN) - __HAL_RCC_MCO2_ENABLE(); -#endif /* RCC_CFGR_MCO2EN */ - } -#endif /* RCC_CFGR_MCO2 */ -} - -/** - * @brief Enables the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. - * @retval None - */ -void HAL_RCC_EnableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Clock Security System. - * @retval None - */ -void HAL_RCC_DisableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; -} - -/** - * @brief Returns the SYSCLK frequency - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -__weak uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0U, pllvco = 0U, pllp = 0U; - uint32_t sysclockfreq = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); - - sysclockfreq = pllvco/pllp; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} - -/** - * @brief Returns the HCLK frequency - * @note Each time HCLK changes, this function must be called to update the - * right HCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated within this function - * @retval HCLK frequency - */ -uint32_t HAL_RCC_GetHCLKFreq(void) -{ - return SystemCoreClock; -} - -/** - * @brief Returns the PCLK1 frequency - * @note Each time PCLK1 changes, this function must be called to update the - * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK1 frequency - */ -uint32_t HAL_RCC_GetPCLK1Freq(void) -{ - /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]); -} - -/** - * @brief Returns the PCLK2 frequency - * @note Each time PCLK2 changes, this function must be called to update the - * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK2 frequency - */ -uint32_t HAL_RCC_GetPCLK2Freq(void) -{ - /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]); -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * will be configured. - * @retval None - */ -__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); -} - -/** - * @brief Configures the RCC_ClkInitStruct according to the internal - * RCC configuration registers. - * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that - * will be configured. - * @param pFLatency Pointer on the Flash Latency. - * @retval None - */ -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) -{ - /* Set all possible values for the Clock type parameter --------------------*/ - RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - /* Get the SYSCLK configuration --------------------------------------------*/ - RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); - - /* Get the HCLK configuration ----------------------------------------------*/ - RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); - - /* Get the APB1 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); - - /* Get the APB2 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U); - - /* Get the Flash Wait State (Latency) configuration ------------------------*/ - *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); -} - -/** - * @brief This function handles the RCC CSS interrupt request. - * @note This API should be called under the NMI_Handler(). - * @retval None - */ -void HAL_RCC_NMI_IRQHandler(void) -{ - /* Check RCC CSSF flag */ - if(__HAL_RCC_GET_IT(RCC_IT_CSS)) - { - /* RCC Clock Security System interrupt user callback */ - HAL_RCC_CSSCallback(); - - /* Clear RCC CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_CSS); - } -} - -/** - * @brief RCC Clock Security System interrupt callback - * @retval None - */ -__weak void HAL_RCC_CSSCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RCC_CSSCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c deleted file mode 100644 index 5076628..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c +++ /dev/null @@ -1,3784 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.c - * @author MCD Application Team - * @brief Extension RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities RCC extension peripheral: - * + Extended Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCCEx RCCEx - * @brief RCCEx HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Constants - * @{ - */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions - * @{ - */ - -/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - [..] - (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to - select the RTC clock source; in this case the Backup domain will be reset in - order to modify the RTC Clock source, as consequence RTC registers (including - the backup registers) and RCC_BDCR register are set to their reset values. - -@endverbatim - * @{ - */ - -#if defined(STM32F446xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - uint32_t plli2sp = 0U; - uint32_t plli2sq = 0U; - uint32_t plli2sr = 0U; - uint32_t pllsaip = 0U; - uint32_t pllsaiq = 0U; - uint32_t plli2sused = 0U; - uint32_t pllsaiused = 0U; - - /* Check the peripheral clock selection parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*------------------------ I2S APB1 configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- I2S APB2 configuration ----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*--------------------------- SAI1 configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*-------------------------- SAI2 configuration ----------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); - - /* Configure SAI2 Clock source */ - __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- RTC configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- FMPI2C1 Configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ CEC Configuration -------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) - { - /* Check the parameters */ - assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); - - /* Configure the CEC clock source */ - __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- CLK48 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLSAI when it's used as clock source for CLK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- SDIO Configuration -------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ SPDIFRX Configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) - { - /* Check the parameters */ - assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection)); - - /* Configure the SPDIFRX clock source */ - __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection); - /* Enable the PLLI2S when it's used as clock source for SPDIFRX */ - if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- PLLI2S Configuration ------------------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1, - I2S on APB2 or SPDIFRX */ - if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /*------ In Case of PLLI2S is selected as source clock for I2S -----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */ - plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - /* Check for PLLI2S/DIVQ parameters */ - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*------ In Case of PLLI2S is selected as source clock for SPDIFRX -------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- PLLSAI Configuration -----------------------*/ - /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CLK48 or SDIO */ - if(pllsaiused == 1U) - { - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM)); - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /*------ In Case of PLLSAI is selected as source clock for SAI -----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI))) - { - /* check for PLLSAIQ Parameter */ - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - /* check for PLLSAI/DIVQ Parameter */ - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0U); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*------ In Case of PLLSAI is selected as source clock for CLK48 ---------*/ - /* In Case of PLLI2S is selected as source clock for CLK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Configure the PLLSAI division factors */ - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLI2SN/PLLSAIM) */ - /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0U); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO |\ - RCC_PERIPHCLK_SPDIFRX; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Get the PLLSAI Clock configuration --------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> RCC_PLLSAICFGR_PLLSAIM_Pos); - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - - /* Get the SAI1 clock configuration ----------------------------------------*/ - PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); - - /* Get the SAI2 clock configuration ----------------------------------------*/ - PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); - - /* Get the I2S APB1 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); - - /* Get the I2S APB2 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the CEC clock configuration -----------------------------------------*/ - PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); - - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the CLK48 clock configuration ----------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - /* Get the SPDIFRX clock configuration -------------------------------------*/ - PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); - - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock - * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - uint32_t tmpreg1 = 0U; - /* This variable used to store the SAI clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - /* This variable used to store the SAI clock source */ - uint32_t saiclocksource = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_SAI1: - case RCC_PERIPHCLK_SAI2: - { - saiclocksource = RCC->DCKCFGR; - saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC); - switch (saiclocksource) - { - case 0U: /* PLLSAI is the clock source for SAI*/ - { - /* Configure the PLLSAI division factor */ - /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM))); - } - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U; - frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U); - frequency = frequency/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/ - case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/ - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM))); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U; - frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U); - frequency = frequency/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/ - case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/ - { - /* Configure the PLLI2S division factor */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - /* SAI_CLK_x = PLL_VCO Output/PLLR */ - tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U; - frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/ - { - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/ - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - frequency = (uint32_t)(HSI_VALUE); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - frequency = (uint32_t)(HSE_VALUE); - } - break; - } - default : - { - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB1: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB1CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB2: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB2CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC, RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - uint32_t pllsaip = 0U; - uint32_t pllsaiq = 0U; - uint32_t pllsair = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*--------------------------- CLK48 Configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ SDIO Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ - /*------------------- Common configuration SAI/I2S -------------------------*/ - /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------- I2S configuration -------------------------------*/ - /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added - only for I2S configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) - { - /* Check the PLLI2S division factors */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Configure the PLLI2S multiplication and division factors */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ - /*----------------------- Common configuration SAI/LTDC --------------------*/ - /* In Case of SAI, LTDC or CLK48 Clock Configuration through PLLSAI, PLLSAIN division - factor is common parameters for these peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && - (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))) - { - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) - { - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, pllsair); - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*---------------------------- LTDC configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, pllsaiq, PeriphClkInit->PLLSAI.PLLSAIR); - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } - - /*---------------------------- CLK48 configuration ------------------------*/ - /* Configure the PLLSAI when it is used as clock source for CLK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == (RCC_PERIPHCLK_CLK48)) && - (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) - { - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - - /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* CLK48_CLK(first level) = PLLSAI_VCO Output/PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, pllsair); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*--------------------------------------------------------------------------*/ - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - return HAL_OK; -} - -/** - * @brief Configures the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI |\ - RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Get the PLLSAI Clock configuration --------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the CLK48 clock configuration -------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t plli2sq = 0U; -#endif /* STM32F413xx || STM32F423xx */ - uint32_t plli2sused = 0U; - - /* Check the peripheral clock selection parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------------------- I2S APB1 configuration ---------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------------- I2S APB2 configuration ---------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*----------------------- SAI1 Block A configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == (RCC_PERIPHCLK_SAIA)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAIACLKSOURCE(PeriphClkInit->SaiAClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(PeriphClkInit->SaiAClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLR) - { - /* Check for PLL/DIVR parameters */ - assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------- SAI1 Block B configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == (RCC_PERIPHCLK_SAIB)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAIBCLKSOURCE(PeriphClkInit->SaiBClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(PeriphClkInit->SaiBClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLR) - { - /* Check for PLL/DIVR parameters */ - assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); - } - } - /*--------------------------------------------------------------------------*/ -#endif /* STM32F413xx || STM32F423xx */ - - /*------------------------------------ RTC configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------ TIM configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- FMPI2C1 Configuration --------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- CLK48 Configuration ----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for CLK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- SDIO Configuration -----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------------------------- PLLI2S Configuration --------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : I2S on APB1 or - I2S on APB2*/ - if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SCLKSOURCE(PeriphClkInit->PLLI2SSelection)); - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - /*-------------------- Set the PLL I2S clock -----------------------------*/ - __HAL_RCC_PLL_I2S_CONFIG(PeriphClkInit->PLLI2SSelection); - - /*------- In Case of PLLI2S is selected as source clock for I2S ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) && (PeriphClkInit->SdioClockSelection == RCC_SDIOCLKSOURCE_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == RCC_PERIPHCLK_SAIA) && (PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == RCC_PERIPHCLK_SAIB) && (PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Check for PLLI2S/DIVR parameters */ - assert_param(IS_RCC_PLLI2S_DIVR_VALUE(PeriphClkInit->PLLI2SDivR)); - - /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVR */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLI2SDivR); - } -#endif /* STM32F413xx || STM32F423xx */ - - /*----------------- In Case of PLLI2S is just selected ------------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM1 Audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); - - /* Configure the DFSDM1 Audio interface clock source */ - __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); - } - /*--------------------------------------------------------------------------*/ - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*-------------------- DFSDM2 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM2 Audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2_AUDIO) == RCC_PERIPHCLK_DFSDM2_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM2AUDIOCLKSOURCE(PeriphClkInit->Dfsdm2AudioClockSelection)); - - /* Configure the DFSDM1 Audio interface clock source */ - __HAL_RCC_DFSDM2AUDIO_CONFIG(PeriphClkInit->Dfsdm2AudioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- LPTIM1 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LPTIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - /*--------------------------------------------------------------------------*/ -#endif /* STM32F413xx || STM32F423xx */ - - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ - RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ - RCC_PERIPHCLK_DFSDM1_AUDIO | RCC_PERIPHCLK_DFSDM2 |\ - RCC_PERIPHCLK_DFSDM2_AUDIO | RCC_PERIPHCLK_LPTIM1 |\ - RCC_PERIPHCLK_SAIA | RCC_PERIPHCLK_SAIB; -#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ - RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ - RCC_PERIPHCLK_DFSDM1_AUDIO; -#endif /* STM32F413xx || STM32F423xx */ - - - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); -#if defined(STM32F413xx) || defined(STM32F423xx) - /* Get the PLL/PLLI2S division factors -------------------------------------*/ - PeriphClkInit->PLLI2SDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVR) >> RCC_DCKCFGR_PLLI2SDIVR_Pos); - PeriphClkInit->PLLDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLDIVR) >> RCC_DCKCFGR_PLLDIVR_Pos); -#endif /* STM32F413xx || STM32F423xx */ - - /* Get the I2S APB1 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); - - /* Get the I2S APB2 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the CLK48 clock configuration ---------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - /* Get the DFSDM1 clock configuration --------------------------------------*/ - PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); - - /* Get the DFSDM1 Audio clock configuration --------------------------------*/ - PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); - -#if defined(STM32F413xx) || defined(STM32F423xx) - /* Get the DFSDM2 clock configuration --------------------------------------*/ - PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); - - /* Get the DFSDM2 Audio clock configuration --------------------------------*/ - PeriphClkInit->Dfsdm2AudioClockSelection = __HAL_RCC_GET_DFSDM2AUDIO_SOURCE(); - - /* Get the LPTIM1 clock configuration --------------------------------------*/ - PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); - - /* Get the SAI1 Block Aclock configuration ---------------------------------*/ - PeriphClkInit->SaiAClockSelection = __HAL_RCC_GET_SAI_BLOCKA_SOURCE(); - - /* Get the SAI1 Block B clock configuration --------------------------------*/ - PeriphClkInit->SaiBClockSelection = __HAL_RCC_GET_SAI_BLOCKB_SOURCE(); -#endif /* STM32F413xx || STM32F423xx */ - - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(I2S..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S_APB1: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLI2S: - { - if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - } - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB1CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB2: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLI2S: - { - if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - } - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB2CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). - * - * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case - * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup - * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- FMPI2C1 Configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- LPTIM1 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LPTIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - - /*---------------------------- I2S Configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPBCLKSOURCE(PeriphClkInit->I2SClockSelection)); - - /* Configure the I2S clock source */ - __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2SClockSelection); - } - - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; - - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the I2S clock configuration -----------------------------------------*/ - PeriphClkInit->I2SClockSelection = __HAL_RCC_GET_I2S_SOURCE(); - - -} -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPBCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPBCLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPBCLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ - /*----------------------- Common configuration SAI/I2S ---------------------*/ - /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- I2S configuration -------------------------*/ - /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added - only for I2S configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) - { - /* Check the PLLI2S division factors */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Configure the PLLI2S multiplication and division factors */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ - /*----------------------- Common configuration SAI/LTDC --------------------*/ - /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)) - { - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) - { - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*---------------------------- LTDC configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR); - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - return HAL_OK; -} - -/** - * @brief Configures the PeriphClkInit according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; - - /* Get the PLLI2S Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Get the PLLSAI Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); - /* Get the RTC Clock configuration -----------------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). - * - * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case - * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup - * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*---------------------------- I2S configuration ---------------------------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); -#if defined(STM32F411xE) - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); -#endif /* STM32F411xE */ - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - -#if defined(STM32F411xE) - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR); -#else - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); -#endif /* STM32F411xE */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); -#if defined(STM32F411xE) - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM); -#endif /* STM32F411xE */ - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { -#if defined(STM32F411xE) - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } -#else - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } -#endif /* STM32F411xE */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Select LSE mode - * - * @note This mode is only available for STM32F410xx/STM32F411xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. - * - * @param Mode specifies the LSE mode. - * This parameter can be one of the following values: - * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection - * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection - * @retval None - */ -void HAL_RCCEx_SelectLSEMode(uint8_t Mode) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE_MODE(Mode)); - if(Mode == RCC_LSE_HIGHDRIVE_MODE) - { - SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); - } - else - { - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); - } -} - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions - * @brief Extended Clock management functions - * -@verbatim - =============================================================================== - ##### Extended clock management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the - activation or deactivation of PLLI2S, PLLSAI. -@endverbatim - * @{ - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Enable PLLI2S. - * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that - * contains the configuration information for the PLLI2S - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN)); - assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR)); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - assert_param(IS_RCC_PLLI2SM_VALUE(PLLI2SInit->PLLI2SM)); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -#if defined(RCC_PLLI2SCFGR_PLLI2SP) - assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP)); -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) - assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ)); -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLI2S division factors */ -#if defined(STM32F446xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SPCLK = PLLI2S_VCO / PLLI2SP */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ - PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ - PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F411xE) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); -#else - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x PLLI2SN */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); -#endif /* STM32F446xx */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Wait till PLLI2S is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLI2S. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) -{ - uint32_t tickstart; - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Enable PLLSAI. - * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that - * contains the configuration information for the PLLSAI - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN)); - assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ)); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - assert_param(IS_RCC_PLLSAIM_VALUE(PLLSAIInit->PLLSAIM)); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -#if defined(RCC_PLLSAICFGR_PLLSAIP) - assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP)); -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#if defined(RCC_PLLSAICFGR_PLLSAIR) - assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR)); -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLSAI division factors */ -#if defined(STM32F446xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLSAIN/PLLSAIM) */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIM, PLLSAIInit->PLLSAIN, \ - PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ, 0U); -#elif defined(STM32F469xx) || defined(STM32F479xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \ - PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#else - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x PLLSAIN */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#endif /* STM32F446xx */ - - /* Enable the PLLSAI */ - __HAL_RCC_PLLSAI_ENABLE(); - - /* Wait till PLLSAI is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLSAI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void) -{ - uint32_t tickstart; - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @} - */ - -#if defined(STM32F446xx) -/** - * @brief Returns the SYSCLK frequency - * - * @note This function implementation is valid only for STM32F446xx devices. - * @note This function add the PLL/PLLR System clock source - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL or PLLR, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0U; - uint32_t pllvco = 0U; - uint32_t pllp = 0U; - uint32_t pllr = 0U; - uint32_t sysclockfreq = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); - - sysclockfreq = pllvco/pllp; - break; - } - case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLR */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); - - sysclockfreq = pllvco/pllr; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE, PLL, PLLI2S and PLLSAI OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - uint32_t tickstart; - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Set HSION bit to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSION); - - /* Wait till HSI is ready */ - while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) - { - if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set HSITRIM[4:0] bits to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSITRIM_4); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset CFGR register */ - CLEAR_REG(RCC->CFGR); - - /* Wait till clock switch is ready */ - while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear HSEON, HSEBYP and CSSON bits */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON); - - /* Wait till HSE is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear PLLON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); - - /* Wait till PLL is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - -#if defined(RCC_PLLI2S_SUPPORT) - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLI2SON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); - - /* Wait till PLLI2S is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLSAI bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); - - /* Wait till PLLSAI is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } -#endif /* RCC_PLLSAI_SUPPORT */ - - /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */ -#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ - defined(STM32F423xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLR_1; -#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) - RCC->PLLCFGR = RCC_PLLCFGR_PLLR_0 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_0 | RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_3; -#else - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2; -#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx || STM32F469xx || STM32F479xx */ - - /* Reset PLLI2SCFGR register to default value */ -#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ - defined(STM32F423xx) || defined(STM32F446xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F411xE) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; -#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx */ - - /* Reset PLLSAICFGR register */ -#if defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIR_1; -#elif defined(STM32F446xx) - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2; -#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F469xx || STM32F479xx */ - - /* Disable all interrupts */ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE); - -#if defined(RCC_CIR_PLLI2SRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -#endif /* RCC_CIR_PLLI2SRDYIE */ - -#if defined(RCC_CIR_PLLSAIRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -#endif /* RCC_CIR_PLLSAIRDYIE */ - - /* Clear all interrupt flags */ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_CSSC); - -#if defined(RCC_CIR_PLLI2SRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -#endif /* RCC_CIR_PLLI2SRDYC */ - -#if defined(RCC_CIR_PLLSAIRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -#endif /* RCC_CIR_PLLSAIRDYC */ - - /* Clear LSION bit */ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); - - /* Reset all CSR flags */ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HSI_VALUE; - - /* Adapt Systick interrupt period */ - if(HAL_InitTick(uwTickPrio) != HAL_OK) - { - return HAL_ERROR; - } - else - { - return HAL_OK; - } -} - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this API. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this API. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note This function add the PLL/PLLR factor management during PLL configuration this feature - * is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ -#if defined(STM32F446xx) - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) -#else - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) -#endif /* STM32F446xx */ - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ -#if defined(STM32F446xx) - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) -#else - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) -#endif /* STM32F446xx */ - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ - WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ - RCC_OscInitStruct->PLL.PLLM | \ - (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ - (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ - (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos) | \ - (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* Check if there is a request to disable the PLL used as System clock source */ - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) - { - return HAL_ERROR; - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->PLLCFGR; -#if defined (RCC_PLLCFGR_PLLR) - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) -#else - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) -#endif - { - return HAL_ERROR; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that will be configured. - * - * @note This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. - * @note This function add the PLL/PLLR factor management - * @retval None - */ -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); - RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); -} -#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c deleted file mode 100644 index bd50438..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c +++ /dev/null @@ -1,867 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rng.c - * @author MCD Application Team - * @brief RNG HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Random Number Generator (RNG) peripheral: - * + Initialization and configuration functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The RNG HAL driver can be used as follows: - - (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro - in HAL_RNG_MspInit(). - (#) Activate the RNG peripheral using HAL_RNG_Init() function. - (#) Wait until the 32 bit Random Number Generator contains a valid - random data using (polling/interrupt) mode. - (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function. - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_RNG_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_RNG_RegisterCallback() to register a user callback. - Function HAL_RNG_RegisterCallback() allows to register following callbacks: - (+) ErrorCallback : RNG Error Callback. - (+) MspInitCallback : RNG MspInit. - (+) MspDeInitCallback : RNG MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_RNG_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - HAL_RNG_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) ErrorCallback : RNG Error Callback. - (+) MspInitCallback : RNG MspInit. - (+) MspDeInitCallback : RNG MspDeInit. - - [..] - For specific callback ReadyDataCallback, use dedicated register callbacks: - respectively HAL_RNG_RegisterReadyDataCallback() , HAL_RNG_UnRegisterReadyDataCallback(). - - [..] - By default, after the HAL_RNG_Init() and when the state is HAL_RNG_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: - example HAL_RNG_ErrorCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_RNG_Init() - and HAL_RNG_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_RNG_Init() and HAL_RNG_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_RNG_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_RNG_STATE_READY or HAL_RNG_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_RNG_RegisterCallback() before calling HAL_RNG_DeInit() - or HAL_RNG_Init() function. - - [..] - When The compilation define USE_HAL_RNG_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (RNG) - -/** @addtogroup RNG - * @brief RNG HAL module driver. - * @{ - */ - -#ifdef HAL_RNG_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RNG_Private_Constants RNG Private Constants - * @{ - */ -#define RNG_TIMEOUT_VALUE 2U -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions prototypes ----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup RNG_Exported_Functions - * @{ - */ - -/** @addtogroup RNG_Exported_Functions_Group1 - * @brief Initialization and configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the RNG according to the specified parameters - in the RNG_InitTypeDef and create the associated handle - (+) DeInitialize the RNG peripheral - (+) Initialize the RNG MSP - (+) DeInitialize RNG MSP - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the RNG peripheral and creates the associated handle. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) -{ - /* Check the RNG handle allocation */ - if (hrng == NULL) - { - return HAL_ERROR; - } - /* Check the parameters */ - assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - if (hrng->State == HAL_RNG_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hrng->Lock = HAL_UNLOCKED; - - hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ - hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hrng->MspInitCallback == NULL) - { - hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware */ - hrng->MspInitCallback(hrng); - } -#else - if (hrng->State == HAL_RNG_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hrng->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_RNG_MspInit(hrng); - } -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - - /* Enable the RNG Peripheral */ - __HAL_RNG_ENABLE(hrng); - - /* Initialize the RNG state */ - hrng->State = HAL_RNG_STATE_READY; - - /* Initialise the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_NONE; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief DeInitializes the RNG peripheral. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) -{ - /* Check the RNG handle allocation */ - if (hrng == NULL) - { - return HAL_ERROR; - } - - /* Disable the RNG Peripheral */ - CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN); - - /* Clear RNG interrupt status flags */ - CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS); - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - if (hrng->MspDeInitCallback == NULL) - { - hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hrng->MspDeInitCallback(hrng); -#else - /* DeInit the low level hardware */ - HAL_RNG_MspDeInit(hrng); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - - /* Update the RNG state */ - hrng->State = HAL_RNG_STATE_RESET; - - /* Initialise the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hrng); - - /* Return the function status */ - return HAL_OK; -} - -/** - * @brief Initializes the RNG MSP. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - */ -__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_MspInit must be implemented in the user file. - */ -} - -/** - * @brief DeInitializes the RNG MSP. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - */ -__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_MspDeInit must be implemented in the user file. - */ -} - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User RNG Callback - * To be used instead of the weak predefined callback - * @param hrng RNG handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID - * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, - pRNG_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_ERROR_CB_ID : - hrng->ErrorCallback = pCallback; - break; - - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = pCallback; - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_RNG_STATE_RESET == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = pCallback; - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -/** - * @brief Unregister an RNG Callback - * RNG callback is redirected to the weak predefined callback - * @param hrng RNG handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID - * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_ERROR_CB_ID : - hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_RNG_STATE_RESET == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */ - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -/** - * @brief Register Data Ready RNG Callback - * To be used instead of the weak HAL_RNG_ReadyDataCallback() predefined callback - * @param hrng RNG handle - * @param pCallback pointer to the Data Ready Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - hrng->ReadyDataCallback = pCallback; - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -/** - * @brief UnRegister the Data Ready RNG Callback - * Data Ready RNG Callback is redirected to the weak HAL_RNG_ReadyDataCallback() predefined callback - * @param hrng RNG handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup RNG_Exported_Functions_Group2 - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Get the 32 bit Random number - (+) Get the 32 bit Random number with interrupt enabled - (+) Handle RNG interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Generates a 32-bit random number. - * @note Each time the random number data is read the RNG_FLAG_DRDY flag - * is automatically cleared. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @param random32bit pointer to generated random number variable if successful. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(hrng); - - /* Check RNG peripheral state */ - if (hrng->State == HAL_RNG_STATE_READY) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if data register contains valid random data */ - while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) - { - if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) - { - /* New check to avoid false timeout detection in case of preemption */ - if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) - { - hrng->State = HAL_RNG_STATE_READY; - hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - return HAL_ERROR; - } - } - } - - /* Get a 32bit Random number */ - hrng->RandomNumber = hrng->Instance->DR; - *random32bit = hrng->RandomNumber; - - hrng->State = HAL_RNG_STATE_READY; - } - else - { - hrng->ErrorCode = HAL_RNG_ERROR_BUSY; - status = HAL_ERROR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - - return status; -} - -/** - * @brief Generates a 32-bit random number in interrupt mode. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(hrng); - - /* Check RNG peripheral state */ - if (hrng->State == HAL_RNG_STATE_READY) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ - __HAL_RNG_ENABLE_IT(hrng); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - - hrng->ErrorCode = HAL_RNG_ERROR_BUSY; - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Returns generated random number in polling mode (Obsolete) - * Use HAL_RNG_GenerateRandomNumber() API instead. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval Random value - */ -uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng) -{ - if (HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK) - { - return hrng->RandomNumber; - } - else - { - return 0U; - } -} - -/** - * @brief Returns a 32-bit random number with interrupt enabled (Obsolete), - * Use HAL_RNG_GenerateRandomNumber_IT() API instead. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval 32-bit random number - */ -uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng) -{ - uint32_t random32bit = 0U; - - /* Process locked */ - __HAL_LOCK(hrng); - - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - /* Get a 32bit Random number */ - random32bit = hrng->Instance->DR; - - /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ - __HAL_RNG_ENABLE_IT(hrng); - - /* Return the 32 bit random number */ - return random32bit; -} - -/** - * @brief Handles RNG interrupt request. - * @note In the case of a clock error, the RNG is no more able to generate - * random numbers because the PLL48CLK clock is not correct. User has - * to check that the clock controller is correctly configured to provide - * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). - * The clock error has no impact on the previously generated - * random numbers, and the RNG_DR register contents can be used. - * @note In the case of a seed error, the generation of random numbers is - * interrupted as long as the SECS bit is '1'. If a number is - * available in the RNG_DR register, it must not be used because it may - * not have enough entropy. In this case, it is recommended to clear the - * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable - * the RNG peripheral to reinitialize and restart the RNG. - * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS - * or CEIS are set. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - - */ -void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) -{ - uint32_t rngclockerror = 0U; - - /* RNG clock error interrupt occurred */ - if (__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_CLOCK; - rngclockerror = 1U; - } - else if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_SEED; - rngclockerror = 1U; - } - else - { - /* Nothing to do */ - } - - if (rngclockerror == 1U) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_ERROR; - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - /* Call registered Error callback */ - hrng->ErrorCallback(hrng); -#else - /* Call legacy weak Error callback */ - HAL_RNG_ErrorCallback(hrng); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - - /* Clear the clock error flag */ - __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI); - - return; - } - - /* Check RNG data ready interrupt occurred */ - if (__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET) - { - /* Generate random number once, so disable the IT */ - __HAL_RNG_DISABLE_IT(hrng); - - /* Get the 32bit Random number (DRDY flag automatically cleared) */ - hrng->RandomNumber = hrng->Instance->DR; - - if (hrng->State != HAL_RNG_STATE_ERROR) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - /* Call registered Data Ready callback */ - hrng->ReadyDataCallback(hrng, hrng->RandomNumber); -#else - /* Call legacy weak Data Ready callback */ - HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Read latest generated random number. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval random value - */ -uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng) -{ - return (hrng->RandomNumber); -} - -/** - * @brief Data Ready callback in non-blocking mode. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @param random32bit generated random number. - * @retval None - */ -__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - UNUSED(random32bit); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_ReadyDataCallback must be implemented in the user file. - */ -} - -/** - * @brief RNG error callbacks. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - */ -__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_ErrorCallback must be implemented in the user file. - */ -} -/** - * @} - */ - - -/** @addtogroup RNG_Exported_Functions_Group3 - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the RNG state. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL state - */ -HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng) -{ - return hrng->State; -} - -/** - * @brief Return the RNG handle error code. - * @param hrng: pointer to a RNG_HandleTypeDef structure. - * @retval RNG Error Code - */ -uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng) -{ - /* Return RNG Error Code */ - return hrng->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - - -#endif /* HAL_RNG_MODULE_ENABLED */ -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c deleted file mode 100644 index 2d2be66..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c +++ /dev/null @@ -1,1896 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rtc.c - * @author MCD Application Team - * @brief RTC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Real-Time Clock (RTC) peripheral: - * + Initialization and de-initialization functions - * + RTC Calendar (Time and Date) configuration functions - * + RTC Alarms (Alarm A and Alarm B) configuration functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### RTC and Backup Domain Operating Condition ##### - ============================================================================== - [..] The real-time clock (RTC), the RTC backup registers, and the backup - SRAM (BKP SRAM) can be powered from the VBAT voltage when the main - VDD supply is powered off. - To retain the content of the RTC backup registers, BKP SRAM, and supply - the RTC when VDD is turned off, VBAT pin can be connected to an optional - standby voltage supplied by a battery or by another source. - - [..] To allow the RTC operating even when the main digital supply (VDD) is turned - off, the VBAT pin powers the following blocks: - (#) The RTC - (#) The LSE oscillator - (#) The BKP SRAM when the low power backup regulator is enabled - (#) PC13 to PC15 I/Os, plus PI8 I/O (when available) - - [..] When the backup domain is supplied by VDD (analog switch connected to VDD), - the following pins are available: - (#) PC14 and PC15 can be used as either GPIO or LSE pins - (#) PC13 can be used as a GPIO or as the RTC_AF1 pin - (#) PI8 can be used as a GPIO or as the RTC_AF2 pin - - [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT - because VDD is not present), the following pins are available: - (#) PC14 and PC15 can be used as LSE pins only - (#) PC13 can be used as the RTC_AF1 pin - (#) PI8 can be used as the RTC_AF2 pin - - ##### Backup Domain Reset ##### - ================================================================== - [..] The backup domain reset sets all RTC registers and the RCC_BDCR register - to their reset values. - The BKP SRAM is not affected by this reset. The only way to reset the BKP - SRAM is through the Flash interface by requesting a protection level - change from 1 to 0. - [..] A backup domain reset is generated when one of the following events occurs: - (#) Software reset, triggered by setting the BDRST bit in the - RCC Backup domain control register (RCC_BDCR). - (#) VDD or VBAT power on, if both supplies have previously been powered off. - - ##### Backup Domain Access ##### - ================================================================== - [..] After reset, the backup domain (RTC registers, RTC backup data registers - and BKP SRAM) is protected against possible unwanted write accesses. - [..] To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - __HAL_RCC_PWR_CLK_ENABLE() macro. - (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. - (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() macro. - (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() macro. - - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (+) Enable the RTC domain access (see description in the section above). - (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour - format using the HAL_RTC_Init() function. - - *** Time and Date configuration *** - =================================== - [..] - (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() - and HAL_RTC_SetDate() functions. - (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() - functions. - (+) To manage the RTC summer or winter time change, use the following - functions: - (++) HAL_RTC_DST_Add1Hour() or HAL_RTC_DST_Sub1Hour to add or subtract - 1 hour from the calendar time. - (++) HAL_RTC_DST_SetStoreOperation() or HAL_RTC_DST_ClearStoreOperation - to memorize whether the time change has been performed or not. - - *** Alarm configuration *** - =========================== - [..] - (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. - You can also configure the RTC Alarm with interrupt mode using the - HAL_RTC_SetAlarm_IT() function. - (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. - - ##### RTC and low power modes ##### - ================================================================== - [..] The MCU can be woken up from a low power mode by an RTC alternate - function. - [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), - RTC wakeup, RTC tamper event detection and RTC timestamp event detection. - These RTC alternate functions can wake up the system from the Stop and - Standby low power modes. - [..] The system can also wake up from low power modes without depending - on an external interrupt (Auto-wakeup mode), by using the RTC alarm - or the RTC wakeup events. - [..] The RTC provides a programmable time base for waking up from the - Stop or Standby mode at regular intervals. - Wakeup from STOP and STANDBY modes is possible only when the RTC clock - source is LSE or LSI. - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_RTC_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Function HAL_RTC_RegisterCallback() to register an interrupt callback. - [..] - Function HAL_RTC_RegisterCallback() allows to register following callbacks: - (+) AlarmAEventCallback : RTC Alarm A Event callback. - (+) AlarmBEventCallback : RTC Alarm B Event callback. - (+) TimeStampEventCallback : RTC Timestamp Event callback. - (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. - (+) Tamper1EventCallback : RTC Tamper 1 Event callback. - (+) Tamper2EventCallback : RTC Tamper 2 Event callback. - (+) MspInitCallback : RTC MspInit callback. - (+) MspDeInitCallback : RTC MspDeInit callback. - [..] - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - Use function HAL_RTC_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) AlarmAEventCallback : RTC Alarm A Event callback. - (+) AlarmBEventCallback : RTC Alarm B Event callback. - (+) TimeStampEventCallback : RTC Timestamp Event callback. - (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. - (+) Tamper1EventCallback : RTC Tamper 1 Event callback. - (+) Tamper2EventCallback : RTC Tamper 2 Event callback. - (+) MspInitCallback : RTC MspInit callback. - (+) MspDeInitCallback : RTC MspDeInit callback. - [..] - By default, after the HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, - all callbacks are set to the corresponding weak functions: - examples AlarmAEventCallback(), WakeUpTimerEventCallback(). - Exception done for MspInit() and MspDeInit() callbacks that are reset to the - legacy weak function in the HAL_RTC_Init()/HAL_RTC_DeInit() only - when these callbacks are null (not registered beforehand). - If not, MspInit() or MspDeInit() are not null, HAL_RTC_Init()/HAL_RTC_DeInit() - keep and use the user MspInit()/MspDeInit() callbacks (registered beforehand). - [..] - Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. - Exception done MspInit()/MspDeInit() that can be registered/unregistered - in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state. - Thus registered (user) MspInit()/MspDeInit() callbacks can be used during the - Init/DeInit. - In that case first register the MspInit()/MspDeInit() user callbacks - using HAL_RTC_RegisterCallback() before calling HAL_RTC_DeInit() - or HAL_RTC_Init() functions. - [..] - When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all - callbacks are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RTC RTC - * @brief RTC HAL module driver - * @{ - */ - -#ifdef HAL_RTC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup RTC_Exported_Functions RTC Exported Functions - * @{ - */ - -/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to initialize and configure the - RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable - RTC registers Write protection, enter and exit the RTC initialization mode, - RTC registers synchronization check and reference clock detection enable. - (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. - It is split into 2 programmable prescalers to minimize power consumption. - (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler. - (++) When both prescalers are used, it is recommended to configure the - asynchronous prescaler to a high value to minimize power consumption. - (#) All RTC registers are Write protected. Writing to the RTC registers - is enabled by writing a key into the Write Protection register, RTC_WPR. - (#) To configure the RTC Calendar, user application should enter - initialization mode. In this mode, the calendar counter is stopped - and its value can be updated. When the initialization sequence is - complete, the calendar restarts counting after 4 RTCCLK cycles. - (#) To read the calendar through the shadow registers after Calendar - initialization, calendar update or after wakeup from low power modes - the software must first clear the RSF flag. The software must then - wait until it is set again before reading the calendar, which means - that the calendar registers have been correctly copied into the - RTC_TR and RTC_DR shadow registers. The HAL_RTC_WaitForSynchro() function - implements the above software sequence (RSF clear and RSF check). - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the RTC peripheral - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Check RTC handler validity */ - if (hrtc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); - assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); - assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); - assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); - assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); - assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); - assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); - -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - if (hrtc->State == HAL_RTC_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hrtc->Lock = HAL_UNLOCKED; - - hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ - hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ - hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ - hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ - hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ -#if defined(RTC_TAMPER2_SUPPORT) - hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ -#endif /* RTC_TAMPER2_SUPPORT */ - - if (hrtc->MspInitCallback == NULL) - { - hrtc->MspInitCallback = HAL_RTC_MspInit; - } - /* Init the low level hardware */ - hrtc->MspInitCallback(hrtc); - - if (hrtc->MspDeInitCallback == NULL) - { - hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; - } - } -#else /* USE_HAL_RTC_REGISTER_CALLBACKS */ - if (hrtc->State == HAL_RTC_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hrtc->Lock = HAL_UNLOCKED; - - /* Initialize RTC MSP */ - HAL_RTC_MspInit(hrtc); - } -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Set RTC state */ - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Clear RTC_CR FMT, OSEL and POL Bits */ - hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL)); - /* Set RTC_CR register */ - hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity); - - /* Configure the RTC PRER */ - hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv); - hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->Instance->TAFCR &= (uint32_t)~RTC_OUTPUT_TYPE_PUSHPULL; - hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType); - - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - return status; -} - -/** - * @brief DeInitializes the RTC peripheral - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @note This function does not reset the RTC Backup Data registers. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); - - /* Set RTC state */ - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Reset RTC registers */ - hrtc->Instance->TR = 0x00000000U; - hrtc->Instance->DR = (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0); - hrtc->Instance->CR &= 0x00000000U; - hrtc->Instance->WUTR = RTC_WUTR_WUT; - hrtc->Instance->PRER = (uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU); - hrtc->Instance->CALIBR = 0x00000000U; - hrtc->Instance->ALRMAR = 0x00000000U; - hrtc->Instance->ALRMBR = 0x00000000U; - hrtc->Instance->CALR = 0x00000000U; - hrtc->Instance->SHIFTR = 0x00000000U; - hrtc->Instance->ALRMASSR = 0x00000000U; - hrtc->Instance->ALRMBSSR = 0x00000000U; - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - if (status == HAL_OK) - { - /* Reset Tamper and alternate functions configuration register */ - hrtc->Instance->TAFCR = 0x00000000U; - -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - if (hrtc->MspDeInitCallback == NULL) - { - hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; - } - - /* DeInit the low level hardware: CLOCK, NVIC.*/ - hrtc->MspDeInitCallback(hrtc); -#else /* USE_HAL_RTC_REGISTER_CALLBACKS */ - /* De-Initialize RTC MSP */ - HAL_RTC_MspDeInit(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - hrtc->State = HAL_RTC_STATE_RESET; - } - - /* Release Lock */ - __HAL_UNLOCK(hrtc); - - return status; -} - -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) -/** - * @brief Registers a User RTC Callback - * To be used instead of the weak predefined callback - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID - * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID - * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID Timestamp Event Callback ID - * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID Wakeup Timer Event Callback ID - * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID - * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID - * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID - * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID - * @note HAL_RTC_TAMPER2_EVENT_CB_ID is not applicable to all devices. - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hrtc); - - if (HAL_RTC_STATE_READY == hrtc->State) - { - switch (CallbackID) - { - case HAL_RTC_ALARM_A_EVENT_CB_ID : - hrtc->AlarmAEventCallback = pCallback; - break; - - case HAL_RTC_ALARM_B_EVENT_CB_ID : - hrtc->AlarmBEventCallback = pCallback; - break; - - case HAL_RTC_TIMESTAMP_EVENT_CB_ID : - hrtc->TimeStampEventCallback = pCallback; - break; - - case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : - hrtc->WakeUpTimerEventCallback = pCallback; - break; - - case HAL_RTC_TAMPER1_EVENT_CB_ID : - hrtc->Tamper1EventCallback = pCallback; - break; - -#if defined(RTC_TAMPER2_SUPPORT) - case HAL_RTC_TAMPER2_EVENT_CB_ID : - hrtc->Tamper2EventCallback = pCallback; - break; -#endif /* RTC_TAMPER2_SUPPORT */ - - case HAL_RTC_MSPINIT_CB_ID : - hrtc->MspInitCallback = pCallback; - break; - - case HAL_RTC_MSPDEINIT_CB_ID : - hrtc->MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_RTC_STATE_RESET == hrtc->State) - { - switch (CallbackID) - { - case HAL_RTC_MSPINIT_CB_ID : - hrtc->MspInitCallback = pCallback; - break; - - case HAL_RTC_MSPDEINIT_CB_ID : - hrtc->MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Unregisters an RTC Callback - * RTC callabck is redirected to the weak predefined callback - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID - * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID - * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID Timestamp Event Callback ID - * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID Wakeup Timer Event Callback ID - * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID - * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID - * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID - * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID - * @note HAL_RTC_TAMPER2_EVENT_CB_ID is not applicable to all devices. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hrtc); - - if (HAL_RTC_STATE_READY == hrtc->State) - { - switch (CallbackID) - { - case HAL_RTC_ALARM_A_EVENT_CB_ID : - hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ - break; - - case HAL_RTC_ALARM_B_EVENT_CB_ID : - hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ - break; - - case HAL_RTC_TIMESTAMP_EVENT_CB_ID : - hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ - break; - - case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : - hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ - break; - - case HAL_RTC_TAMPER1_EVENT_CB_ID : - hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ - break; - -#if defined(RTC_TAMPER2_SUPPORT) - case HAL_RTC_TAMPER2_EVENT_CB_ID : - hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ - break; -#endif /* RTC_TAMPER2_SUPPORT */ - - case HAL_RTC_MSPINIT_CB_ID : - hrtc->MspInitCallback = HAL_RTC_MspInit; - break; - - case HAL_RTC_MSPDEINIT_CB_ID : - hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_RTC_STATE_RESET == hrtc->State) - { - switch (CallbackID) - { - case HAL_RTC_MSPINIT_CB_ID : - hrtc->MspInitCallback = HAL_RTC_MspInit; - break; - - case HAL_RTC_MSPDEINIT_CB_ID : - hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrtc); - - return status; -} -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - -/** - * @brief Initializes the RTC MSP. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the RTC MSP. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTC_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions - * @brief RTC Time and Date functions - * -@verbatim - =============================================================================== - ##### RTC Time and Date functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure Time and Date features - -@endverbatim - * @{ - */ - -/** - * @brief Sets RTC current time. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTime Pointer to Time structure - * @note DayLightSaving and StoreOperation interfaces are deprecated. - * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions. - * @param Format Specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) -{ - uint32_t tmpreg = 0U; - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving)); - assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - if (Format == RTC_FORMAT_BIN) - { - if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) - { - assert_param(IS_RTC_HOUR12(sTime->Hours)); - assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); - } - else - { - sTime->TimeFormat = 0x00U; - assert_param(IS_RTC_HOUR24(sTime->Hours)); - } - assert_param(IS_RTC_MINUTES(sTime->Minutes)); - assert_param(IS_RTC_SECONDS(sTime->Seconds)); - - tmpreg = (uint32_t)(( (uint32_t)RTC_ByteToBcd2(sTime->Hours) << RTC_TR_HU_Pos) | \ - ( (uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \ - ( (uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \ - (((uint32_t)sTime->TimeFormat) << RTC_TR_PM_Pos)); - } - else - { - if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) - { - assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours))); - assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); - } - else - { - sTime->TimeFormat = 0x00U; - assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); - } - assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); - assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); - tmpreg = (((uint32_t)(sTime->Hours) << RTC_TR_HU_Pos) | \ - ((uint32_t)(sTime->Minutes) << RTC_TR_MNU_Pos) | \ - ((uint32_t) sTime->Seconds) | \ - ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos)); - } - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Set the RTC_TR register */ - hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); - - /* Clear the bits to be configured (Deprecated. Use HAL_RTC_DST_xxx functions instead) */ - hrtc->Instance->CR &= (uint32_t)~RTC_CR_BKP; - - /* Configure the RTC_CR register (Deprecated. Use HAL_RTC_DST_xxx functions instead) */ - hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Gets RTC current time. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTime Pointer to Time structure - * @param Format Specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @note You can use SubSeconds and SecondFraction (sTime structure fields - * returned) to convert SubSeconds value in second fraction ratio with - * time unit following generic formula: - * Second fraction ratio * time_unit = - * [(SecondFraction - SubSeconds) / (SecondFraction + 1)] * time_unit - * This conversion can be performed only if no shift operation is pending - * (ie. SHFP=0) when PREDIV_S >= SS - * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the - * values in the higher-order calendar shadow registers to ensure - * consistency between the time and date values. - * Reading RTC current time locks the values in calendar shadow registers - * until current date is read to ensure consistency between the time and - * date values. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) -{ - uint32_t tmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - - /* Get subseconds value from the corresponding register */ - sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR); - - /* Get SecondFraction structure field from the corresponding register field*/ - sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S); - - /* Get the TR register */ - tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); - - /* Fill the structure fields with the read parameters */ - sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TR_HU_Pos); - sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); - sTime->Seconds = (uint8_t)( tmpreg & (RTC_TR_ST | RTC_TR_SU)); - sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> RTC_TR_PM_Pos); - - /* Check the input parameters format */ - if (Format == RTC_FORMAT_BIN) - { - /* Convert the time structure parameters to Binary format */ - sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); - sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); - sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); - } - - return HAL_OK; -} - -/** - * @brief Sets RTC current date. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sDate Pointer to date structure - * @param Format specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) -{ - uint32_t datetmpreg = 0U; - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - if ((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U)) - { - sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU); - } - - assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); - - if (Format == RTC_FORMAT_BIN) - { - assert_param(IS_RTC_YEAR(sDate->Year)); - assert_param(IS_RTC_MONTH(sDate->Month)); - assert_param(IS_RTC_DATE(sDate->Date)); - - datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << RTC_DR_YU_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \ - ((uint32_t)sDate->WeekDay << RTC_DR_WDU_Pos)); - } - else - { - assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); - assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); - assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); - - datetmpreg = ((((uint32_t)sDate->Year) << RTC_DR_YU_Pos) | \ - (((uint32_t)sDate->Month) << RTC_DR_MU_Pos) | \ - ((uint32_t) sDate->Date) | \ - (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos)); - } - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Set the RTC_DR register */ - hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Gets RTC current date. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sDate Pointer to Date structure - * @param Format Specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the - * values in the higher-order calendar shadow registers to ensure - * consistency between the time and date values. - * Reading RTC current time locks the values in calendar shadow registers - * until current date is read to ensure consistency between the time and - * date values. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) -{ - uint32_t datetmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - - /* Get the DR register */ - datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); - - /* Fill the structure fields with the read parameters */ - sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos); - sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos); - sDate->Date = (uint8_t) (datetmpreg & (RTC_DR_DT | RTC_DR_DU)); - sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> RTC_DR_WDU_Pos); - - /* Check the input parameters format */ - if (Format == RTC_FORMAT_BIN) - { - /* Convert the date structure parameters to Binary format */ - sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); - sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); - sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); - } - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions - * @brief RTC Alarm functions - * -@verbatim - =============================================================================== - ##### RTC Alarm functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure Alarm feature - -@endverbatim - * @{ - */ -/** - * @brief Sets the specified RTC Alarm. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sAlarm Pointer to Alarm structure - * @param Format Specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @note The Alarm register can only be written when the corresponding Alarm - * is disabled (Use the HAL_RTC_DeactivateAlarm()). - * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg = 0U; - uint32_t subsecondtmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - assert_param(IS_RTC_ALARM(sAlarm->Alarm)); - assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); - assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); - assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - /* Change RTC state to BUSY */ - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Check the data format (binary or BCD) and store the Alarm time and date - configuration accordingly */ - if (Format == RTC_FORMAT_BIN) - { - if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) - { - assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); - assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); - } - else - { - sAlarm->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); - } - assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); - assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); - - if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); - } - else - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); - } - - tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ - ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_TR_PM_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ - ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ - ((uint32_t)sAlarm->AlarmMask)); - } - else - { - if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) - { - assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); - assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); - } - else - { - sAlarm->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); - } - - assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); - assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); - - if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); - } - else - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); - } - - tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ - ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ - ((uint32_t) sAlarm->AlarmTime.Seconds) | \ - ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_TR_PM_Pos) | \ - ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ - ((uint32_t) sAlarm->AlarmDateWeekDaySel) | \ - ((uint32_t) sAlarm->AlarmMask)); - } - - /* Store the Alarm subseconds configuration */ - subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \ - (uint32_t)(sAlarm->AlarmSubSecondMask)); - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Configure the Alarm register */ - if (sAlarm->Alarm == RTC_ALARM_A) - { - /* Disable the Alarm A */ - __HAL_RTC_ALARMA_DISABLE(hrtc); - - /* In case interrupt mode is used, the interrupt source must be disabled */ - __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); - - /* Clear the Alarm flag */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - - hrtc->Instance->ALRMAR = (uint32_t)tmpreg; - /* Configure the Alarm A Subseconds register */ - hrtc->Instance->ALRMASSR = subsecondtmpreg; - /* Configure the Alarm state: Enable Alarm */ - __HAL_RTC_ALARMA_ENABLE(hrtc); - } - else - { - /* Disable the Alarm B */ - __HAL_RTC_ALARMB_DISABLE(hrtc); - - /* In case interrupt mode is used, the interrupt source must be disabled */ - __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB); - - /* Clear the Alarm flag */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - - hrtc->Instance->ALRMBR = (uint32_t)tmpreg; - /* Configure the Alarm B Subseconds register */ - hrtc->Instance->ALRMBSSR = subsecondtmpreg; - /* Configure the Alarm state: Enable Alarm */ - __HAL_RTC_ALARMB_ENABLE(hrtc); - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state back to READY */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Sets the specified RTC Alarm with Interrupt. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sAlarm Pointer to Alarm structure - * @param Format Specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @note The Alarm register can only be written when the corresponding Alarm - * is disabled (Use the HAL_RTC_DeactivateAlarm()). - * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) -{ - __IO uint32_t count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); - uint32_t tmpreg = 0U; - uint32_t subsecondtmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - assert_param(IS_RTC_ALARM(sAlarm->Alarm)); - assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); - assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); - assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - /* Change RTC state to BUSY */ - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Check the data format (binary or BCD) and store the Alarm time and date - configuration accordingly */ - if (Format == RTC_FORMAT_BIN) - { - if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) - { - assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); - assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); - } - else - { - sAlarm->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); - } - assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); - assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); - - if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); - } - else - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); - } - - tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ - ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_TR_PM_Pos) | \ - ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ - ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ - ((uint32_t)sAlarm->AlarmMask)); - } - else - { - if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) - { - assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); - assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); - } - else - { - sAlarm->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); - } - - assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); - assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); - - if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); - } - else - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); - } - - tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ - ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ - ((uint32_t) sAlarm->AlarmTime.Seconds) | \ - ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_TR_PM_Pos) | \ - ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ - ((uint32_t) sAlarm->AlarmDateWeekDaySel) | \ - ((uint32_t) sAlarm->AlarmMask)); - } - - /* Store the Alarm subseconds configuration */ - subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \ - (uint32_t)(sAlarm->AlarmSubSecondMask)); - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Configure the Alarm register */ - if (sAlarm->Alarm == RTC_ALARM_A) - { - /* Disable the Alarm A */ - __HAL_RTC_ALARMA_DISABLE(hrtc); - - /* Clear the Alarm flag */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); - - /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */ - do - { - if (count-- == 0U) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U); - - hrtc->Instance->ALRMAR = (uint32_t)tmpreg; - /* Configure the Alarm A Subseconds register */ - hrtc->Instance->ALRMASSR = subsecondtmpreg; - /* Configure the Alarm state: Enable Alarm */ - __HAL_RTC_ALARMA_ENABLE(hrtc); - /* Configure the Alarm interrupt */ - __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA); - } - else - { - /* Disable the Alarm B */ - __HAL_RTC_ALARMB_DISABLE(hrtc); - - /* Clear the Alarm flag */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); - - /* Reload the counter */ - count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); - - /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */ - do - { - if (count-- == 0U) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U); - - hrtc->Instance->ALRMBR = (uint32_t)tmpreg; - /* Configure the Alarm B Subseconds register */ - hrtc->Instance->ALRMBSSR = subsecondtmpreg; - /* Configure the Alarm state: Enable Alarm */ - __HAL_RTC_ALARMB_ENABLE(hrtc); - /* Configure the Alarm interrupt */ - __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB); - } - - /* RTC Alarm Interrupt Configuration: EXTI configuration */ - __HAL_RTC_ALARM_EXTI_ENABLE_IT(); - __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state back to READY */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates the specified RTC Alarm. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Alarm Specifies the Alarm. - * This parameter can be one of the following values: - * @arg RTC_ALARM_A: Alarm A - * @arg RTC_ALARM_B: Alarm B - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) -{ - uint32_t tickstart = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_ALARM(Alarm)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - if (Alarm == RTC_ALARM_A) - { - /* Disable Alarm A */ - __HAL_RTC_ALARMA_DISABLE(hrtc); - - /* In case interrupt mode is used, the interrupt source must be disabled */ - __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC ALRxWF flag is set and if timeout is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable Alarm B */ - __HAL_RTC_ALARMB_DISABLE(hrtc); - - /* In case interrupt mode is used, the interrupt source must be disabled */ - __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC ALRxWF flag is set and if timeout is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Gets the RTC Alarm value and masks. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sAlarm Pointer to Date structure - * @param Alarm Specifies the Alarm. - * This parameter can be one of the following values: - * @arg RTC_ALARM_A: Alarm A - * @arg RTC_ALARM_B: Alarm B - * @param Format Specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) -{ - uint32_t tmpreg = 0U; - uint32_t subsecondtmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - assert_param(IS_RTC_ALARM(Alarm)); - - if (Alarm == RTC_ALARM_A) - { - sAlarm->Alarm = RTC_ALARM_A; - - tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); - subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS); - } - else - { - sAlarm->Alarm = RTC_ALARM_B; - - tmpreg = (uint32_t)(hrtc->Instance->ALRMBR); - subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS); - } - - /* Fill the structure with the read parameters */ - sAlarm->AlarmTime.Hours = (uint8_t) ((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> RTC_ALRMAR_HU_Pos); - sAlarm->AlarmTime.Minutes = (uint8_t) ((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos); - sAlarm->AlarmTime.Seconds = (uint8_t) ( tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)); - sAlarm->AlarmTime.TimeFormat = (uint8_t) ((tmpreg & RTC_ALRMAR_PM) >> RTC_TR_PM_Pos); - sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; - sAlarm->AlarmDateWeekDay = (uint8_t) ((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> RTC_ALRMAR_DU_Pos); - sAlarm->AlarmDateWeekDaySel = (uint32_t) (tmpreg & RTC_ALRMAR_WDSEL); - sAlarm->AlarmMask = (uint32_t) (tmpreg & RTC_ALARMMASK_ALL); - - if (Format == RTC_FORMAT_BIN) - { - sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); - sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); - sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); - sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); - } - - return HAL_OK; -} - -/** - * @brief Handles Alarm interrupt request. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc) -{ - /* Get the Alarm A interrupt source enable status */ - if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U) - { - /* Get the pending status of the Alarm A Interrupt */ - if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U) - { - /* Alarm A callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->AlarmAEventCallback(hrtc); -#else - HAL_RTC_AlarmAEventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Alarm A interrupt pending bit */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); - } - } - - /* Get the Alarm B interrupt source enable status */ - if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != 0U) - { - /* Get the pending status of the Alarm B Interrupt */ - if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != 0U) - { - /* Alarm B callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->AlarmBEventCallback(hrtc); -#else - HAL_RTCEx_AlarmBEventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Alarm B interrupt pending bit */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); - } - } - - /* Clear the EXTI's line Flag for RTC Alarm */ - __HAL_RTC_ALARM_EXTI_CLEAR_FLAG(); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; -} - -/** - * @brief Alarm A callback. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTC_AlarmAEventCallback could be implemented in the user file - */ -} - -/** - * @brief Handles Alarm A Polling request. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC ALRAF flag is set and if timeout is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - } - - /* Clear the Alarm flag */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Wait for RTC Time and Date Synchronization - (+) Manage RTC Summer or Winter time change - -@endverbatim - * @{ - */ - -/** - * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are - * synchronized with RTC APB clock. - * @note The RTC Resynchronization mode is write protected, use the - * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. - * @note To read the calendar through the shadow registers after Calendar - * initialization, calendar update or after wakeup from low power modes - * the software must first clear the RSF flag. - * The software must then wait until it is set again before reading - * the calendar, which means that the calendar registers have been - * correctly copied into the RTC_TR and RTC_DR shadow registers. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc) -{ - uint32_t tickstart = 0U; - - /* Clear RSF flag */ - hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait the registers to be synchronised */ - while ((hrtc->Instance->ISR & RTC_ISR_RSF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Daylight Saving Time, adds one hour to the calendar in one - * single operation without going through the initialization procedure. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc) -{ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H); - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); -} - -/** - * @brief Daylight Saving Time, subtracts one hour from the calendar in one - * single operation without going through the initialization procedure. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc) -{ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H); - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); -} - -/** - * @brief Daylight Saving Time, sets the store operation bit. - * @note It can be used by the software in order to memorize the DST status. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc) -{ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - SET_BIT(hrtc->Instance->CR, RTC_CR_BKP); - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); -} - -/** - * @brief Daylight Saving Time, clears the store operation bit. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc) -{ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP); - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); -} - -/** - * @brief Daylight Saving Time, reads the store operation bit. - * @param hrtc RTC handle - * @retval operation see RTC_StoreOperation_Definitions - */ -uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc) -{ - return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP); -} - -/** - * @} - */ - -/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Get RTC state - -@endverbatim - * @{ - */ -/** - * @brief Returns the RTC state. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL state - */ -HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc) -{ - return hrtc->State; -} - -/** - * @} - */ - - -/** - * @} - */ - -/** @addtogroup RTC_Private_Functions - * @{ - */ - -/** - * @brief Enters the RTC Initialization mode. - * @note The RTC Initialization mode is write protected, use the - * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc) -{ - uint32_t tickstart = 0U; - HAL_StatusTypeDef status = HAL_OK; - - /* Check that Initialization mode is not already set */ - if (READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U) - { - /* Set INIT bit to enter Initialization mode */ - SET_BIT(hrtc->Instance->ISR, RTC_ISR_INIT); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC is in INIT state and if timeout is reached exit */ - while ((READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U) && (status != HAL_ERROR)) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Set RTC state */ - hrtc->State = HAL_RTC_STATE_ERROR; - status = HAL_ERROR; - } - } - } - - return status; -} - -/** - * @brief Exits the RTC Initialization mode. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Clear INIT bit to exit Initialization mode */ - CLEAR_BIT(hrtc->Instance->ISR, RTC_ISR_INIT); - - /* If CR_BYPSHAD bit = 0, wait for synchro */ - if (READ_BIT(hrtc->Instance->CR, RTC_CR_BYPSHAD) == 0U) - { - if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) - { - /* Set RTC state */ - hrtc->State = HAL_RTC_STATE_ERROR; - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief Converts a 2-digit number from decimal to BCD format. - * @param number decimal-formatted number (from 0 to 99) to be converted - * @retval Converted byte - */ -uint8_t RTC_ByteToBcd2(uint8_t number) -{ - uint8_t bcdhigh = 0U; - - while (number >= 10U) - { - bcdhigh++; - number -= 10U; - } - - return ((uint8_t)(bcdhigh << 4U) | number); -} - -/** - * @brief Converts a 2-digit number from BCD to decimal format. - * @param number BCD-formatted number (from 00 to 99) to be converted - * @retval Converted word - */ -uint8_t RTC_Bcd2ToByte(uint8_t number) -{ - uint8_t tmp = 0U; - tmp = ((uint8_t)(number & (uint8_t)0xF0) >> (uint8_t)0x4) * 10; - return (tmp + (number & (uint8_t)0x0F)); -} - -/** - * @} - */ - -#endif /* HAL_RTC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c deleted file mode 100644 index eb5708f..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c +++ /dev/null @@ -1,1878 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rtc_ex.c - * @author MCD Application Team - * @brief Extended RTC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Real-Time Clock (RTC) Extended peripheral: - * + RTC Timestamp functions - * + RTC Tamper functions - * + RTC Wakeup functions - * + Extended Control functions - * + Extended RTC features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (+) Enable the RTC domain access. - (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour - format using the HAL_RTC_Init() function. - - *** RTC Wakeup configuration *** - ================================ - [..] - (+) To configure the RTC Wakeup Clock source and Counter use the - HAL_RTCEx_SetWakeUpTimer() function. - You can also configure the RTC Wakeup timer in interrupt mode using the - HAL_RTCEx_SetWakeUpTimer_IT() function. - (+) To read the RTC Wakeup Counter register, use the HAL_RTCEx_GetWakeUpTimer() - function. - - *** Timestamp configuration *** - =============================== - [..] - (+) To configure the RTC Timestamp use the HAL_RTCEx_SetTimeStamp() function. - You can also configure the RTC Timestamp with interrupt mode using the - HAL_RTCEx_SetTimeStamp_IT() function. - (+) To read the RTC Timestamp Time and Date register, use the - HAL_RTCEx_GetTimeStamp() function. - (+) The Timestamp alternate function can be mapped either to RTC_AF1 (PC13) - or RTC_AF2 (PI8) depending on the value of TSINSEL bit in RTC_TAFCR - register. - For STM32F446xx devices RTC_AF2 corresponds to pin PA0 and not to pin PI8. - The corresponding pin is also selected by HAL_RTCEx_SetTimeStamp() - or HAL_RTCEx_SetTimeStamp_IT() functions. - - *** Tamper configuration *** - ============================ - [..] - (+) To Enable the RTC Tamper and configure the Tamper filter count, trigger - Edge or Level according to the Tamper filter value (if equal to 0 Edge - else Level), sampling frequency, precharge or discharge and Pull-UP use - the HAL_RTCEx_SetTamper() function. - You can configure RTC Tamper in interrupt mode using HAL_RTCEx_SetTamper_IT() - function. - (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13) - or RTC_AF2 (PI8) depending on the value of TAMP1INSEL bit in RTC_TAFCR - register. - The corresponding pin is also selected by HAL_RTCEx_SetTamper() - or HAL_RTCEx_SetTamper_IT() functions. - (+) The TAMPER2 alternate function is mapped to RTC_AF2 (PI8). - For STM32F446xx devices RTC_AF2 corresponds to pin PA0 and not to pin PI8. - - *** Backup Data Registers configuration *** - =========================================== - [..] - (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() - function. - (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() - function. - - *** Coarse Digital Calibration configuration *** - ================================================ - [..] - (+) The Coarse Digital Calibration can be used to compensate crystal inaccuracy - by setting the DCS bit in RTC_CALIBR register. - (+) When positive calibration is enabled (DCS = ‘0’), 2 asynchronous prescaler - clock cycles are added every minute during 2xDC minutes. - This causes the calendar to be updated sooner, thereby adjusting the - effective RTC frequency to be a bit higher. - (+) When negative calibration is enabled (DCS = ‘1’), 1 asynchronous prescaler - clock cycle is removed every minute during 2xDC minutes. - This causes the calendar to be updated later, thereby adjusting the - effective RTC frequency to be a bit lower. - (+) DC is configured through bits DC[4:0] of RTC_CALIBR register. This number - ranges from 0 to 31 corresponding to a time interval (2xDC) ranging from - 0 to 62. - (+) In order to measure the clock deviation, a 512 Hz clock is output for - calibration. - (+) The RTC Coarse Digital Calibration value and sign can be calibrated using - the HAL_RTCEx_SetCoarseCalib() function. - - *** Smooth Digital Calibration configuration *** - ================================================ - [..] - (+) RTC frequency can be digitally calibrated with a resolution of about - 0.954 ppm with a range from -487.1 ppm to +488.5 ppm. - The correction of the frequency is performed using a series of small - adjustments (adding and/or subtracting individual RTCCLK pulses). - (+) The smooth digital calibration is performed during a cycle of about 2^20 - RTCCLK pulses (or 32 seconds) when the input frequency is 32,768 Hz. - This cycle is maintained by a 20-bit counter clocked by RTCCLK. - (+) The smooth calibration register (RTC_CALR) specifies the number of RTCCLK - clock cycles to be masked during the 32-second cycle. - (+) The RTC Smooth Digital Calibration value and the corresponding calibration - cycle period (32s, 16s, or 8s) can be calibrated using the - HAL_RTCEx_SetSmoothCalib() function. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RTCEx RTCEx - * @brief RTC Extended HAL module driver - * @{ - */ - -#ifdef HAL_RTC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions - * @{ - */ - -/** @defgroup RTCEx_Exported_Functions_Group1 RTC Timestamp and Tamper functions - * @brief RTC Timestamp and Tamper functions - * -@verbatim - =============================================================================== - ##### RTC Timestamp and Tamper functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure Timestamp feature - -@endverbatim - * @{ - */ - -/** - * @brief Sets Timestamp. - * @note This API must be called before enabling the Timestamp feature. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param RTC_TimeStampEdge Specifies the pin edge on which the Timestamp is - * activated. - * This parameter can be one of the following values: - * @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on - * the rising edge of the related pin. - * @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on - * the falling edge of the related pin. - * @param RTC_TimeStampPin Specifies the RTC Timestamp Pin. - * This parameter can be one of the following values: - * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC Timestamp Pin. - * @arg RTC_TIMESTAMPPIN_POS1: PI8 is selected as RTC Timestamp Pin. - * @note RTC_TIMESTAMPPIN_POS1 corresponds to pin PA0 in the case of - * STM32F446xx devices. - * @note RTC_TIMESTAMPPIN_POS1 is not applicable to the following list of devices: - * STM32F412xx, STM32F413xx and STM32F423xx. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin) -{ - uint32_t tmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_TIMESTAMP_EDGE(RTC_TimeStampEdge)); - assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - /* Change RTC state to BUSY */ - hrtc->State = HAL_RTC_STATE_BUSY; - - hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL; - hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin); - - /* Get the RTC_CR register and clear the bits to be configured */ - tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); - - /* Configure the Timestamp TSEDGE bit */ - tmpreg |= RTC_TimeStampEdge; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Copy the desired configuration into the CR register */ - hrtc->Instance->CR = (uint32_t)tmpreg; - - /* Clear RTC Timestamp flag */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); - - /* Clear RTC Timestamp overrun Flag */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); - - /* Enable the Timestamp saving */ - __HAL_RTC_TIMESTAMP_ENABLE(hrtc); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state back to READY */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Sets Timestamp with Interrupt. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @note This API must be called before enabling the Timestamp feature. - * @param RTC_TimeStampEdge Specifies the pin edge on which the Timestamp is - * activated. - * This parameter can be one of the following values: - * @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on - * the rising edge of the related pin. - * @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on - * the falling edge of the related pin. - * @param RTC_TimeStampPin Specifies the RTC Timestamp Pin. - * This parameter can be one of the following values: - * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC Timestamp Pin. - * @arg RTC_TIMESTAMPPIN_POS1: PI8 is selected as RTC Timestamp Pin. - * @note RTC_TIMESTAMPPIN_POS1 corresponds to pin PA0 in the case of - * STM32F446xx devices. - * @note RTC_TIMESTAMPPIN_POS1 is not applicable to the following list of devices: - * STM32F412xx, STM32F413xx and STM32F423xx. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin) -{ - uint32_t tmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_TIMESTAMP_EDGE(RTC_TimeStampEdge)); - assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - /* Change RTC state to BUSY */ - hrtc->State = HAL_RTC_STATE_BUSY; - - hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL; - hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin); - - /* Get the RTC_CR register and clear the bits to be configured */ - tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); - - /* Configure the Timestamp TSEDGE bit */ - tmpreg |= RTC_TimeStampEdge; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Copy the desired configuration into the CR register */ - hrtc->Instance->CR = (uint32_t)tmpreg; - - /* Clear RTC Timestamp flag */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); - - /* Clear RTC Timestamp overrun Flag */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); - - /* Enable the Timestamp saving */ - __HAL_RTC_TIMESTAMP_ENABLE(hrtc); - - /* Enable IT Timestamp */ - __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* RTC Timestamp Interrupt Configuration: EXTI configuration */ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT(); - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); - - /* Change RTC state back to READY */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates Timestamp. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) -{ - uint32_t tmpreg = 0U; - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* In case of interrupt mode is used, the interrupt source must disabled */ - __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); - - /* Get the RTC_CR register and clear the bits to be configured */ - tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); - - /* Configure the Timestamp TSEDGE and Enable bits */ - hrtc->Instance->CR = (uint32_t)tmpreg; - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Gets the RTC Timestamp value. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTimeStamp Pointer to Time structure - * @param sTimeStampDate Pointer to Date structure - * @param Format specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_FORMAT_BIN: Binary data format - * @arg RTC_FORMAT_BCD: BCD data format - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format) -{ - uint32_t tmptime = 0U; - uint32_t tmpdate = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(Format)); - - /* Get the Timestamp time and date registers values */ - tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); - tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); - - /* Fill the Time structure fields with the read parameters */ - sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TSTR_HT | RTC_TSTR_HU)) >> RTC_TSTR_HU_Pos); - sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TSTR_MNT | RTC_TSTR_MNU)) >> RTC_TSTR_MNU_Pos); - sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TSTR_ST | RTC_TSTR_SU)) >> RTC_TSTR_SU_Pos); - sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TSTR_PM)) >> RTC_TSTR_PM_Pos); - sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR; - - /* Fill the Date structure fields with the read parameters */ - sTimeStampDate->Year = 0U; - sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_TSDR_MT | RTC_TSDR_MU)) >> RTC_TSDR_MU_Pos); - sTimeStampDate->Date = (uint8_t)((tmpdate & (RTC_TSDR_DT | RTC_TSDR_DU)) >> RTC_TSDR_DU_Pos); - sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_TSDR_WDU)) >> RTC_TSDR_WDU_Pos); - - /* Check the input parameters format */ - if (Format == RTC_FORMAT_BIN) - { - /* Convert the Timestamp structure parameters to Binary format */ - sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); - sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); - sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); - - /* Convert the DateTimeStamp structure parameters to Binary format */ - sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); - sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); - sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); - } - - /* Clear the Timestamp Flag */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); - - return HAL_OK; -} - -/** - * @brief Sets Tamper. - * @note By calling this API the tamper global interrupt will be disabled. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTamper Pointer to Tamper Structure. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) -{ - uint32_t tmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_TAMPER(sTamper->Tamper)); - assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection)); - assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); - assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); - assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger)); - assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); - assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); - assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); - assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Copy control register into temporary variable */ - tmpreg = hrtc->Instance->TAFCR; - - /* Enable selected tamper */ - tmpreg |= (sTamper->Tamper); - - /* Configure the tamper trigger bit (this bit is just on the right of the - tamper enable bit, hence the one-time right shift before updating it) */ - if (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE) - { - /* Set the tamper trigger bit (case of falling edge or high level) */ - tmpreg |= (uint32_t)(sTamper->Tamper << 1U); - } - else - { - /* Clear the tamper trigger bit (case of rising edge or low level) */ - tmpreg &= (uint32_t)~(sTamper->Tamper << 1U); - } - - /* Clear remaining fields before setting them */ - tmpreg &= ~(RTC_TAMPERFILTER_MASK | \ - RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \ - RTC_TAMPERPRECHARGEDURATION_MASK | \ - RTC_TAMPER_PULLUP_MASK | \ - RTC_TAFCR_TAMP1INSEL | \ - RTC_TIMESTAMPONTAMPERDETECTION_MASK); - - /* Set remaining parameters of desired configuration into temporary variable */ - tmpreg |= ((uint32_t)sTamper->Filter | \ - (uint32_t)sTamper->SamplingFrequency | \ - (uint32_t)sTamper->PrechargeDuration | \ - (uint32_t)sTamper->TamperPullUp | \ - (uint32_t)sTamper->PinSelection | \ - (uint32_t)sTamper->TimeStampOnTamperDetection); - - /* Disable tamper global interrupt in case it is enabled */ - tmpreg &= (uint32_t)~RTC_TAFCR_TAMPIE; - - /* Copy desired configuration into configuration register */ - hrtc->Instance->TAFCR = tmpreg; - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Sets Tamper with interrupt. - * @note By calling this API the tamper global interrupt will be enabled. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTamper Pointer to RTC Tamper. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) -{ - uint32_t tmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_TAMPER(sTamper->Tamper)); - assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection)); - assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); - assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); - assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger)); - assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); - assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); - assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); - assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Copy control register into temporary variable */ - tmpreg = hrtc->Instance->TAFCR; - - /* Enable selected tamper */ - tmpreg |= (sTamper->Tamper); - - /* Configure the tamper trigger bit (this bit is just on the right of the - tamper enable bit, hence the one-time right shift before updating it) */ - if (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE) - { - /* Set the tamper trigger bit (case of falling edge or high level) */ - tmpreg |= (uint32_t)(sTamper->Tamper << 1U); - } - else - { - /* Clear the tamper trigger bit (case of rising edge or low level) */ - tmpreg &= (uint32_t)~(sTamper->Tamper << 1U); - } - - /* Clear remaining fields before setting them */ - tmpreg &= ~(RTC_TAMPERFILTER_MASK | \ - RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \ - RTC_TAMPERPRECHARGEDURATION_MASK | \ - RTC_TAMPER_PULLUP_MASK | \ - RTC_TAFCR_TAMP1INSEL | \ - RTC_TIMESTAMPONTAMPERDETECTION_MASK); - - /* Set remaining parameters of desired configuration into temporary variable */ - tmpreg |= ((uint32_t)sTamper->Filter | \ - (uint32_t)sTamper->SamplingFrequency | \ - (uint32_t)sTamper->PrechargeDuration | \ - (uint32_t)sTamper->TamperPullUp | \ - (uint32_t)sTamper->PinSelection | \ - (uint32_t)sTamper->TimeStampOnTamperDetection); - - /* Enable global tamper interrupt */ - tmpreg |= (uint32_t)RTC_TAFCR_TAMPIE; - - /* Copy desired configuration into configuration register */ - hrtc->Instance->TAFCR = tmpreg; - - /* RTC Tamper Interrupt Configuration: EXTI configuration */ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT(); - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates Tamper. - * @note The tamper global interrupt bit will remain unchanged. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Tamper Selected tamper pin. - * This parameter can be any combination of the following values: - * @arg RTC_TAMPER_1: Tamper 1 - * @arg RTC_TAMPER_2: Tamper 2 - * @note RTC_TAMPER_2 is not applicable to all devices. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) -{ - assert_param(IS_RTC_TAMPER(Tamper)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the selected Tamper pin */ - hrtc->Instance->TAFCR &= (uint32_t)~Tamper; - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Handles Timestamp and Tamper interrupt request. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc) -{ - /* Get the Timestamp interrupt source enable status */ - if (__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != 0U) - { - /* Get the pending status of the Timestamp Interrupt */ - if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != 0U) - { - /* Timestamp callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->TimeStampEventCallback(hrtc); -#else - HAL_RTCEx_TimeStampEventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Timestamp interrupt pending bit */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); - } - } - - /* Get the Tamper 1 interrupt source enable status */ - if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP) != 0U) - { - /* Get the pending status of the Tamper 1 Interrupt */ - if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != 0U) - { - /* Tamper callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->Tamper1EventCallback(hrtc); -#else - HAL_RTCEx_Tamper1EventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Tamper interrupt pending bit */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); - } - } - -#if defined(RTC_TAMPER2_SUPPORT) - /* Get the Tamper 2 interrupt source enable status */ - if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP) != 0U) - { - /* Get the pending status of the Tamper 2 Interrupt */ - if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != 0U) - { - /* Tamper callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->Tamper2EventCallback(hrtc); -#else - HAL_RTCEx_Tamper2EventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Tamper interrupt pending bit */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F); - } - } -#endif /* RTC_TAMPER2_SUPPORT */ - - /* Clear the EXTI's Flag for RTC Timestamp and Tamper */ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG(); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; -} - -/** - * @brief Timestamp callback. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file - */ -} - -/** - * @brief Tamper 1 callback. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file - */ -} - -#if defined(RTC_TAMPER2_SUPPORT) -/** - * @brief Tamper 2 callback. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file - */ -} -#endif /* RTC_TAMPER2_SUPPORT */ - -/** - * @brief Handles Timestamp polling request. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - - if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U) - { - /* Clear the Timestamp Overrun Flag */ - __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); - - /* Change Timestamp state */ - hrtc->State = HAL_RTC_STATE_ERROR; - - return HAL_ERROR; - } - } - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Handles Tamper 1 Polling. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Get the status of the Interrupt */ - while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == 0U) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - } - - /* Clear the Tamper Flag */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} - -#if defined(RTC_TAMPER2_SUPPORT) -/** - * @brief Handles Tamper 2 Polling. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Get the status of the Interrupt */ - while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == 0U) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - } - - /* Clear the Tamper Flag */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} -#endif /* RTC_TAMPER2_SUPPORT */ - -/** - * @} - */ - -/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wakeup functions - * @brief RTC Wakeup functions - * -@verbatim - =============================================================================== - ##### RTC Wakeup functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure Wakeup feature - -@endverbatim - * @{ - */ - -/** - * @brief Sets wakeup timer. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param WakeUpCounter Wakeup counter - * @param WakeUpClock Wakeup clock - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) -{ - uint32_t tickstart = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); - assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Check RTC WUTWF flag is reset only when wakeup timer enabled*/ - if ((hrtc->Instance->CR & RTC_CR_WUTE) != 0U) - { - tickstart = HAL_GetTick(); - - /* Wait till RTC WUTWF flag is reset and if timeout is reached exit */ - while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) != 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - } - - /* Disable the Wakeup timer */ - __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); - - /* Clear the Wakeup flag */ - __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC WUTWF flag is set and if timeout is reached exit */ - while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - - /* Clear the Wakeup Timer clock source bits in CR register */ - hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; - - /* Configure the clock source */ - hrtc->Instance->CR |= (uint32_t)WakeUpClock; - - /* Configure the Wakeup Timer counter */ - hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; - - /* Enable the Wakeup Timer */ - __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Sets wakeup timer with interrupt. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param WakeUpCounter Wakeup counter - * @param WakeUpClock Wakeup clock - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) -{ - __IO uint32_t count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); - - /* Check the parameters */ - assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); - assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Check RTC WUTWF flag is reset only when wakeup timer enabled */ - if ((hrtc->Instance->CR & RTC_CR_WUTE) != 0U) - { - /* Wait till RTC WUTWF flag is reset and if timeout is reached exit */ - do - { - if (count-- == 0U) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) != 0U); - } - - /* Disable the Wakeup timer */ - __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); - - /* Clear the Wakeup flag */ - __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); - - /* Reload the counter */ - count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); - - /* Wait till RTC WUTWF flag is set and if timeout is reached exit */ - do - { - if (count-- == 0U) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U); - - /* Clear the Wakeup Timer clock source bits in CR register */ - hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; - - /* Configure the clock source */ - hrtc->Instance->CR |= (uint32_t)WakeUpClock; - - /* Configure the Wakeup Timer counter */ - hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; - - /* RTC wakeup timer Interrupt Configuration: EXTI configuration */ - __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); - __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); - - /* Configure the interrupt in the RTC_CR register */ - __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc, RTC_IT_WUT); - - /* Enable the Wakeup Timer */ - __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates wakeup timer counter. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) -{ - uint32_t tickstart = 0U; - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Disable the Wakeup Timer */ - __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); - - /* In case of interrupt mode is used, the interrupt source must disabled */ - __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc, RTC_IT_WUT); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC WUTWF flag is set and if timeout is reached exit */ - while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Gets wakeup timer counter. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval Counter value - */ -uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) -{ - /* Get the counter value */ - return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); -} - -/** - * @brief Handles Wakeup Timer interrupt request. - * @note Unlike alarm interrupt line (shared by Alarms A and B) or tamper - * interrupt line (shared by timestamp and tampers) wakeup timer - * interrupt line is exclusive to the wakeup timer. - * There is no need in this case to check on the interrupt enable - * status via __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(). - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) -{ - /* Get the pending status of the Wakeup timer Interrupt */ - if (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != 0U) - { - /* Wakeup timer callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->WakeUpTimerEventCallback(hrtc); -#else - HAL_RTCEx_WakeUpTimerEventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Wakeup timer interrupt pending bit */ - __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); - } - - /* Clear the EXTI's line Flag for RTC WakeUpTimer */ - __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG(); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; -} - -/** - * @brief Wakeup Timer callback. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file - */ -} - -/** - * @brief Handles Wakeup Timer Polling. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == 0U) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - } - - /* Clear the Wakeup timer Flag */ - __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Write a data in a specified RTC Backup data register - (+) Read a data in a specified RTC Backup data register - (+) Set the Coarse calibration parameters. - (+) Deactivate the Coarse calibration parameters - (+) Set the Smooth calibration parameters. - (+) Configure the Synchronization Shift Control Settings. - (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). - (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). - (+) Enable the RTC reference clock detection. - (+) Disable the RTC reference clock detection. - (+) Enable the Bypass Shadow feature. - (+) Disable the Bypass Shadow feature. - -@endverbatim - * @{ - */ - -/** - * @brief Writes a data in a specified RTC Backup data register. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param BackupRegister RTC Backup data Register number. - * This parameter can be: RTC_BKP_DRx (where x can be from 0 to 19) - * to specify the register. - * @param Data Data to be written in the specified RTC Backup data register. - * @retval None - */ -void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) -{ - uint32_t tmp = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_BKP(BackupRegister)); - - tmp = (uint32_t) & (hrtc->Instance->BKP0R); - tmp += (BackupRegister * 4U); - - /* Write the specified register */ - *(__IO uint32_t *)tmp = (uint32_t)Data; -} - -/** - * @brief Reads data from the specified RTC Backup data Register. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param BackupRegister RTC Backup data Register number. - * This parameter can be: RTC_BKP_DRx (where x can be from 0 to 19) - * to specify the register. - * @retval Read value - */ -uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) -{ - uint32_t tmp = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_BKP(BackupRegister)); - - tmp = (uint32_t) & (hrtc->Instance->BKP0R); - tmp += (BackupRegister * 4U); - - /* Read the specified register */ - return (*(__IO uint32_t *)tmp); -} - -/** - * @brief Sets the Coarse calibration parameters. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param CalibSign Specifies the sign of the coarse calibration value. - * This parameter can be one of the following values: - * @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive - * @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative - * @param Value value of coarse calibration expressed in ppm (coded on 5 bits). - * - * @note This Calibration value should be between 0 and 63 when using negative - * sign with a 2-ppm step. - * - * @note This Calibration value should be between 0 and 126 when using positive - * sign with a 4-ppm step. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value) -{ - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_RTC_CALIB_SIGN(CalibSign)); - assert_param(IS_RTC_CALIB_VALUE(Value)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Enable the Coarse Calibration */ - __HAL_RTC_COARSE_CALIB_ENABLE(hrtc); - - /* Set the coarse calibration value */ - hrtc->Instance->CALIBR = (uint32_t)(CalibSign | Value); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Deactivates the Coarse calibration parameters. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc) -{ - HAL_StatusTypeDef status; - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Disable the Coarse Calibration */ - __HAL_RTC_COARSE_CALIB_DISABLE(hrtc); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Sets the Smooth calibration parameters. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param SmoothCalibPeriod Select the Smooth Calibration Period. - * This parameter can be can be one of the following values: - * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. - * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. - * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. - * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. - * This parameter can be one of the following values: - * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. - * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. - * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. - * This parameter can be one any value from 0 to 0x000001FF. - * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses - * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field - * SmoothCalibMinusPulsesValue must be equal to 0. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) -{ - uint32_t tickstart = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); - assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); - assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* check if a calibration is pending*/ - if ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* check if a calibration is pending*/ - while ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - } - - /* Configure the Smooth calibration settings */ - hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | \ - (uint32_t)SmoothCalibPlusPulses | \ - (uint32_t)SmoothCalibMinusPulsesValue); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Configures the Synchronization Shift Control Settings. - * @note When REFCKON is set, firmware must not write to Shift control register. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param ShiftAdd1S Select to add or not 1 second to the time calendar. - * This parameter can be one of the following values: - * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. - * @arg RTC_SHIFTADD1S_RESET: No effect. - * @param ShiftSubFS Select the number of Second Fractions to substitute. - * This parameter can be one any value from 0 to 0x7FFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) -{ - uint32_t tickstart = 0U; - - /* Check the parameters */ - assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); - assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until the shift is completed */ - while ((hrtc->Instance->ISR & RTC_ISR_SHPF) != 0U) - { - if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_TIMEOUT; - } - } - - /* Check if the reference clock detection is disabled */ - if ((hrtc->Instance->CR & RTC_CR_REFCKON) == 0U) - { - /* Configure the Shift settings */ - hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); - - /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ - if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U) - { - if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - hrtc->State = HAL_RTC_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_ERROR; - } - } - } - else - { - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_ERROR; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param CalibOutput Select the Calibration output Selection. - * This parameter can be one of the following values: - * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. - * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput) -{ - /* Check the parameters */ - assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Clear flags before config */ - hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; - - /* Configure the RTC_CR register */ - hrtc->Instance->CR |= (uint32_t)CalibOutput; - - __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc) -{ - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Enables the RTC reference clock detection. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc) -{ - HAL_StatusTypeDef status; - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Enable the reference clock detection */ - __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Disable the RTC reference clock detection. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc) -{ - HAL_StatusTypeDef status; - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Enter Initialization mode */ - status = RTC_EnterInitMode(hrtc); - - if (status == HAL_OK) - { - /* Disable the reference clock detection */ - __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc); - - /* Exit Initialization mode */ - status = RTC_ExitInitMode(hrtc); - } - - if (status == HAL_OK) - { - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return status; -} - -/** - * @brief Enables the Bypass Shadow feature. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @note When the Bypass Shadow is enabled the calendar value are taken - * directly from the Calendar counter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc) -{ - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Set the BYPSHAD bit */ - hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Disables the Bypass Shadow feature. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @note When the Bypass Shadow is enabled the calendar value are taken - * directly from the Calendar counter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc) -{ - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); - - /* Reset the BYPSHAD bit */ - hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD; - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions - * @brief Extended features functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) RTC Alarm B callback - (+) RTC Poll for Alarm B request - -@endverbatim - * @{ - */ - -/** - * @brief Alarm B callback. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file - */ -} - -/** - * @brief Handles Alarm B Polling request. - * @param hrtc pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till RTC ALRBF flag is set and if timeout is reached exit */ - while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == 0U) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - } - - /* Clear the Alarm flag */ - __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RTC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c deleted file mode 100644 index 19e3748..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c +++ /dev/null @@ -1,2554 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sai.c - * @author MCD Application Team - * @brief SAI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Serial Audio Interface (SAI) peripheral: - * + Initialization/de-initialization functions - * + I/O operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - - [..] - The SAI HAL driver can be used as follows: - - (#) Declare a SAI_HandleTypeDef handle structure (eg. SAI_HandleTypeDef hsai). - (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API: - (##) Enable the SAI interface clock. - (##) SAI pins configuration: - (+++) Enable the clock for the SAI GPIOs. - (+++) Configure these SAI pins as alternate function pull-up. - (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT() - and HAL_SAI_Receive_IT() APIs): - (+++) Configure the SAI interrupt priority. - (+++) Enable the NVIC SAI IRQ handle. - - (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA() - and HAL_SAI_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx stream. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx Stream. - (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the - DMA Tx/Rx Stream. - - (#) The initialization can be done by two ways - (##) Expert mode : Initialize the structures Init, FrameInit and SlotInit and call HAL_SAI_Init(). - (##) Simplified mode : Initialize the high part of Init Structure and call HAL_SAI_InitProtocol(). - - [..] - (@) The specific SAI interrupts (FIFO request and Overrun underrun interrupt) - will be managed using the macros __HAL_SAI_ENABLE_IT() and __HAL_SAI_DISABLE_IT() - inside the transmit and receive process. - - [..] - (@) SAI Clock Source configuration is managed differently depending on the selected - STM32F4 devices : - (+@) For STM32F446xx devices, the configuration is managed through RCCEx_PeriphCLKConfig() - function in the HAL RCC drivers - (+@) For STM32F439xx/STM32F437xx/STM32F429xx/STM32F427xx devices, the configuration - is managed within HAL SAI drivers through HAL_SAI_Init() function using - ClockSource field of SAI_InitTypeDef structure. - [..] - (@) Make sure that either: - (+@) I2S PLL is configured or - (+@) SAI PLL is configured or - (+@) External clock source is configured after setting correctly - the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file. - [..] - (@) In master Tx mode: enabling the audio block immediately generates the bit clock - for the external slaves even if there is no data in the FIFO, However FS signal - generation is conditioned by the presence of data in the FIFO. - - [..] - (@) In master Rx mode: enabling the audio block immediately generates the bit clock - and FS signal for the external slaves. - - [..] - (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior: - (+@) First bit Offset <= (SLOT size - Data size) - (+@) Data size <= SLOT size - (+@) Number of SLOT x SLOT size = Frame length - (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected. - - [..] - Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_SAI_Transmit() - (+) Receive an amount of data in blocking mode using HAL_SAI_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non-blocking mode using HAL_SAI_Transmit_IT() - (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SAI_TxCpltCallback() - (+) Receive an amount of data in non-blocking mode using HAL_SAI_Receive_IT() - (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SAI_RxCpltCallback() - (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SAI_ErrorCallback() - - *** DMA mode IO operation *** - ============================= - [..] - (+) Send an amount of data in non-blocking mode (DMA) using HAL_SAI_Transmit_DMA() - (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SAI_TxCpltCallback() - (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SAI_Receive_DMA() - (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SAI_RxCpltCallback() - (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SAI_ErrorCallback() - (+) Pause the DMA Transfer using HAL_SAI_DMAPause() - (+) Resume the DMA Transfer using HAL_SAI_DMAResume() - (+) Stop the DMA Transfer using HAL_SAI_DMAStop() - - *** SAI HAL driver additional function list *** - =============================================== - [..] - Below the list the others API available SAI HAL driver : - - (+) HAL_SAI_EnableTxMuteMode(): Enable the mute in tx mode - (+) HAL_SAI_DisableTxMuteMode(): Disable the mute in tx mode - (+) HAL_SAI_EnableRxMuteMode(): Enable the mute in Rx mode - (+) HAL_SAI_DisableRxMuteMode(): Disable the mute in Rx mode - (+) HAL_SAI_FlushRxFifo(): Flush the rx fifo. - (+) HAL_SAI_Abort(): Abort the current transfer - - *** SAI HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in SAI HAL driver : - - (+) __HAL_SAI_ENABLE(): Enable the SAI peripheral - (+) __HAL_SAI_DISABLE(): Disable the SAI peripheral - (+) __HAL_SAI_ENABLE_IT(): Enable the specified SAI interrupts - (+) __HAL_SAI_DISABLE_IT(): Disable the specified SAI interrupts - (+) __HAL_SAI_GET_IT_SOURCE(): Check if the specified SAI interrupt source is - enabled or disabled - (+) __HAL_SAI_GET_FLAG(): Check whether the specified SAI flag is set or not - - *** Callback registration *** - ============================= - [..] - The compilation define USE_HAL_SAI_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use functions HAL_SAI_RegisterCallback() to register a user callback. - - [..] - Function HAL_SAI_RegisterCallback() allows to register following callbacks: - (+) RxCpltCallback : SAI receive complete. - (+) RxHalfCpltCallback : SAI receive half complete. - (+) TxCpltCallback : SAI transmit complete. - (+) TxHalfCpltCallback : SAI transmit half complete. - (+) ErrorCallback : SAI error. - (+) MspInitCallback : SAI MspInit. - (+) MspDeInitCallback : SAI MspDeInit. - [..] - This function takes as parameters the HAL peripheral handle, the callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_SAI_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - HAL_SAI_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the callback ID. - [..] - This function allows to reset following callbacks: - (+) RxCpltCallback : SAI receive complete. - (+) RxHalfCpltCallback : SAI receive half complete. - (+) TxCpltCallback : SAI transmit complete. - (+) TxHalfCpltCallback : SAI transmit half complete. - (+) ErrorCallback : SAI error. - (+) MspInitCallback : SAI MspInit. - (+) MspDeInitCallback : SAI MspDeInit. - - [..] - By default, after the HAL_SAI_Init and if the state is HAL_SAI_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions: - examples HAL_SAI_RxCpltCallback(), HAL_SAI_ErrorCallback(). - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_SAI_Init - and HAL_SAI_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_SAI_Init and HAL_SAI_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_SAI_RegisterCallback before calling HAL_SAI_DeInit - or HAL_SAI_Init function. - - [..] - When the compilation define USE_HAL_SAI_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SAI SAI - * @brief SAI HAL module driver - * @{ - */ - -#ifdef HAL_SAI_MODULE_ENABLED - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) - -/** @defgroup SAI_Private_Typedefs SAI Private Typedefs - * @{ - */ -typedef enum -{ - SAI_MODE_DMA, - SAI_MODE_IT -} SAI_ModeTypedef; -/** - * @} - */ - -/* Private define ------------------------------------------------------------*/ - -/** @defgroup SAI_Private_Constants SAI Private Constants - * @{ - */ -#define SAI_DEFAULT_TIMEOUT 4U /* 4ms */ -#define SAI_LONG_TIMEOUT 1000U /* 1s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup SAI_Private_Functions SAI Private Functions - * @{ - */ -static void SAI_FillFifo(SAI_HandleTypeDef *hsai); -static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode); -static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); -static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); - -static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai); -static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai); -static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai); -static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai); -static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai); -static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai); -static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai); - -static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma); -static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma); -static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void SAI_DMAError(DMA_HandleTypeDef *hdma); -static void SAI_DMAAbort(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @defgroup SAI_Exported_Functions SAI Exported Functions - * @{ - */ - -/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the SAIx peripheral: - - (+) User must implement HAL_SAI_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_SAI_Init() to configure the selected device with - the selected configuration: - (++) Mode (Master/slave TX/RX) - (++) Protocol - (++) Data Size - (++) MCLK Output - (++) Audio frequency - (++) FIFO Threshold - (++) Frame Config - (++) Slot Config - - (+) Call the function HAL_SAI_DeInit() to restore the default configuration - of the selected SAI peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the structure FrameInit, SlotInit and the low part of - * Init according to the specified parameters and call the function - * HAL_SAI_Init to initialize the SAI block. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param protocol one of the supported protocol @ref SAI_Protocol - * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize - * the configuration information for SAI module. - * @param nbslot Number of slot. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol)); - assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize)); - - switch (protocol) - { - case SAI_I2S_STANDARD : - case SAI_I2S_MSBJUSTIFIED : - case SAI_I2S_LSBJUSTIFIED : - status = SAI_InitI2S(hsai, protocol, datasize, nbslot); - break; - case SAI_PCM_LONG : - case SAI_PCM_SHORT : - status = SAI_InitPCM(hsai, protocol, datasize, nbslot); - break; - default : - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - status = HAL_SAI_Init(hsai); - } - - return status; -} - -/** - * @brief Initialize the SAI according to the specified parameters. - * in the SAI_InitTypeDef structure and initialize the associated handle. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) -{ - uint32_t tmpregisterGCR = 0U; - - /* This variable used to store the SAI_CK_x (value in Hz) */ - uint32_t freq = 0U; - - /* This variable is used to compute CKSTR bits of SAI CR1 according to - ClockStrobing and AudioMode fields */ - uint32_t ckstr_bits = 0U; - uint32_t syncen_bits = 0U; - - /* Check the SAI handle allocation */ - if (hsai == NULL) - { - return HAL_ERROR; - } - - /* check the instance */ - assert_param(IS_SAI_ALL_INSTANCE(hsai->Instance)); - - /* Check the SAI Block parameters */ - assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency)); - assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol)); - assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode)); - assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt)); - assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize)); - assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit)); - assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing)); - assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro)); - assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive)); - assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider)); - assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold)); - assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode)); - assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode)); - assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState)); - - /* Check the SAI Block Frame parameters */ - assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength)); - assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength)); - assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition)); - assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity)); - assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset)); - - /* Check the SAI Block Slot parameters */ - assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset)); - assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize)); - assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber)); - assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive)); - - if (hsai->State == HAL_SAI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hsai->Lock = HAL_UNLOCKED; - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - /* Reset callback pointers to the weak predefined callbacks */ - hsai->RxCpltCallback = HAL_SAI_RxCpltCallback; - hsai->RxHalfCpltCallback = HAL_SAI_RxHalfCpltCallback; - hsai->TxCpltCallback = HAL_SAI_TxCpltCallback; - hsai->TxHalfCpltCallback = HAL_SAI_TxHalfCpltCallback; - hsai->ErrorCallback = HAL_SAI_ErrorCallback; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - if (hsai->MspInitCallback == NULL) - { - hsai->MspInitCallback = HAL_SAI_MspInit; - } - hsai->MspInitCallback(hsai); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_SAI_MspInit(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - - hsai->State = HAL_SAI_STATE_BUSY; - - /* Disable the selected SAI peripheral */ - SAI_Disable(hsai); - - /* SAI Block Synchro Configuration -----------------------------------------*/ - SAI_BlockSynchroConfig(hsai); - - /* Configure Master Clock using the following formula : - MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS - FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256 - MCKDIV[3:0] = SAI_CK_x / FS * 512 */ - if (hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV) - { - /* Get SAI clock source based on Source clock selection from RCC */ - freq = SAI_GetInputClock(hsai); - - /* (saiclocksource x 10) to keep Significant digits */ - tmpregisterGCR = (((freq * 10U) / ((hsai->Init.AudioFrequency) * 512U))); - - hsai->Init.Mckdiv = tmpregisterGCR / 10U; - - /* Round result to the nearest integer */ - if ((tmpregisterGCR % 10U) > 8U) - { - hsai->Init.Mckdiv += 1U; - } - - /* For SPDIF protocol, SAI shall provide a bit clock twice faster the symbol-rate */ - if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) - { - hsai->Init.Mckdiv = hsai->Init.Mckdiv >> 1; - } - } - - /* Check the SAI Block master clock divider parameter */ - assert_param(IS_SAI_BLOCK_MASTER_DIVIDER(hsai->Init.Mckdiv)); - - /* Compute CKSTR bits of SAI CR1 according to ClockStrobing and AudioMode */ - if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) - { - ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? 0U : SAI_xCR1_CKSTR; - } - else - { - ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? SAI_xCR1_CKSTR : 0U; - } - - /* SAI Block Configuration -------------------------------------------------*/ - switch (hsai->Init.Synchro) - { - case SAI_ASYNCHRONOUS : - { - syncen_bits = 0U; - } - break; - case SAI_SYNCHRONOUS : - { - syncen_bits = SAI_xCR1_SYNCEN_0; - } - break; - case SAI_SYNCHRONOUS_EXT_SAI1 : - case SAI_SYNCHRONOUS_EXT_SAI2 : - { - syncen_bits = SAI_xCR1_SYNCEN_1; - } - break; - default: - break; - } - - /* SAI CR1 Configuration */ - hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \ - SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN | \ - SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \ - SAI_xCR1_NODIV | SAI_xCR1_MCKDIV); - - hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \ - hsai->Init.DataSize | hsai->Init.FirstBit | \ - ckstr_bits | syncen_bits | \ - hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \ - hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20U)); - - /* SAI CR2 Configuration */ - hsai->Instance->CR2 &= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP | SAI_xCR2_CPL); - hsai->Instance->CR2 |= (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState); - - /* SAI Frame Configuration -----------------------------------------*/ - hsai->Instance->FRCR &= (~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \ - SAI_xFRCR_FSPOL | SAI_xFRCR_FSOFF)); - hsai->Instance->FRCR |= ((hsai->FrameInit.FrameLength - 1U) | - hsai->FrameInit.FSOffset | - hsai->FrameInit.FSDefinition | - hsai->FrameInit.FSPolarity | - ((hsai->FrameInit.ActiveFrameLength - 1U) << 8U)); - - /* SAI Block_x SLOT Configuration ------------------------------------------*/ - /* This register has no meaning in AC 97 and SPDIF audio protocol */ - hsai->Instance->SLOTR &= ~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ | \ - SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN); - - hsai->Instance->SLOTR |= hsai->SlotInit.FirstBitOffset | hsai->SlotInit.SlotSize | \ - (hsai->SlotInit.SlotActive << 16U) | ((hsai->SlotInit.SlotNumber - 1U) << 8U); - - /* Initialize the error code */ - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - - /* Initialize the SAI state */ - hsai->State = HAL_SAI_STATE_READY; - - /* Release Lock */ - __HAL_UNLOCK(hsai); - - return HAL_OK; -} - -/** - * @brief DeInitialize the SAI peripheral. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai) -{ - /* Check the SAI handle allocation */ - if (hsai == NULL) - { - return HAL_ERROR; - } - - hsai->State = HAL_SAI_STATE_BUSY; - - /* Disabled All interrupt and clear all the flag */ - hsai->Instance->IMR = 0U; - hsai->Instance->CLRFR = 0xFFFFFFFFU; - - /* Disable the SAI */ - SAI_Disable(hsai); - - /* Flush the fifo */ - SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - if (hsai->MspDeInitCallback == NULL) - { - hsai->MspDeInitCallback = HAL_SAI_MspDeInit; - } - hsai->MspDeInitCallback(hsai); -#else - HAL_SAI_MspDeInit(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - - /* Initialize the error code */ - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - - /* Initialize the SAI state */ - hsai->State = HAL_SAI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hsai); - - return HAL_OK; -} - -/** - * @brief Initialize the SAI MSP. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the SAI MSP. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) -/** - * @brief Register a user SAI callback - * to be used instead of the weak predefined callback. - * @param hsai SAI handle. - * @param CallbackID ID of the callback to be registered. - * This parameter can be one of the following values: - * @arg @ref HAL_SAI_RX_COMPLETE_CB_ID receive complete callback ID. - * @arg @ref HAL_SAI_RX_HALFCOMPLETE_CB_ID receive half complete callback ID. - * @arg @ref HAL_SAI_TX_COMPLETE_CB_ID transmit complete callback ID. - * @arg @ref HAL_SAI_TX_HALFCOMPLETE_CB_ID transmit half complete callback ID. - * @arg @ref HAL_SAI_ERROR_CB_ID error callback ID. - * @arg @ref HAL_SAI_MSPINIT_CB_ID MSP init callback ID. - * @arg @ref HAL_SAI_MSPDEINIT_CB_ID MSP de-init callback ID. - * @param pCallback pointer to the callback function. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_SAI_RegisterCallback(SAI_HandleTypeDef *hsai, - HAL_SAI_CallbackIDTypeDef CallbackID, - pSAI_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - else - { - if (HAL_SAI_STATE_READY == hsai->State) - { - switch (CallbackID) - { - case HAL_SAI_RX_COMPLETE_CB_ID : - hsai->RxCpltCallback = pCallback; - break; - case HAL_SAI_RX_HALFCOMPLETE_CB_ID : - hsai->RxHalfCpltCallback = pCallback; - break; - case HAL_SAI_TX_COMPLETE_CB_ID : - hsai->TxCpltCallback = pCallback; - break; - case HAL_SAI_TX_HALFCOMPLETE_CB_ID : - hsai->TxHalfCpltCallback = pCallback; - break; - case HAL_SAI_ERROR_CB_ID : - hsai->ErrorCallback = pCallback; - break; - case HAL_SAI_MSPINIT_CB_ID : - hsai->MspInitCallback = pCallback; - break; - case HAL_SAI_MSPDEINIT_CB_ID : - hsai->MspDeInitCallback = pCallback; - break; - default : - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SAI_STATE_RESET == hsai->State) - { - switch (CallbackID) - { - case HAL_SAI_MSPINIT_CB_ID : - hsai->MspInitCallback = pCallback; - break; - case HAL_SAI_MSPDEINIT_CB_ID : - hsai->MspDeInitCallback = pCallback; - break; - default : - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - } - return status; -} - -/** - * @brief Unregister a user SAI callback. - * SAI callback is redirected to the weak predefined callback. - * @param hsai SAI handle. - * @param CallbackID ID of the callback to be unregistered. - * This parameter can be one of the following values: - * @arg @ref HAL_SAI_RX_COMPLETE_CB_ID receive complete callback ID. - * @arg @ref HAL_SAI_RX_HALFCOMPLETE_CB_ID receive half complete callback ID. - * @arg @ref HAL_SAI_TX_COMPLETE_CB_ID transmit complete callback ID. - * @arg @ref HAL_SAI_TX_HALFCOMPLETE_CB_ID transmit half complete callback ID. - * @arg @ref HAL_SAI_ERROR_CB_ID error callback ID. - * @arg @ref HAL_SAI_MSPINIT_CB_ID MSP init callback ID. - * @arg @ref HAL_SAI_MSPDEINIT_CB_ID MSP de-init callback ID. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_SAI_UnRegisterCallback(SAI_HandleTypeDef *hsai, - HAL_SAI_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (HAL_SAI_STATE_READY == hsai->State) - { - switch (CallbackID) - { - case HAL_SAI_RX_COMPLETE_CB_ID : - hsai->RxCpltCallback = HAL_SAI_RxCpltCallback; - break; - case HAL_SAI_RX_HALFCOMPLETE_CB_ID : - hsai->RxHalfCpltCallback = HAL_SAI_RxHalfCpltCallback; - break; - case HAL_SAI_TX_COMPLETE_CB_ID : - hsai->TxCpltCallback = HAL_SAI_TxCpltCallback; - break; - case HAL_SAI_TX_HALFCOMPLETE_CB_ID : - hsai->TxHalfCpltCallback = HAL_SAI_TxHalfCpltCallback; - break; - case HAL_SAI_ERROR_CB_ID : - hsai->ErrorCallback = HAL_SAI_ErrorCallback; - break; - case HAL_SAI_MSPINIT_CB_ID : - hsai->MspInitCallback = HAL_SAI_MspInit; - break; - case HAL_SAI_MSPDEINIT_CB_ID : - hsai->MspDeInitCallback = HAL_SAI_MspDeInit; - break; - default : - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SAI_STATE_RESET == hsai->State) - { - switch (CallbackID) - { - case HAL_SAI_MSPINIT_CB_ID : - hsai->MspInitCallback = HAL_SAI_MspInit; - break; - case HAL_SAI_MSPDEINIT_CB_ID : - hsai->MspDeInitCallback = HAL_SAI_MspDeInit; - break; - default : - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update the error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - return status; -} -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup SAI_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to manage the SAI data - transfers. - - (+) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (+) Blocking mode functions are : - (++) HAL_SAI_Transmit() - (++) HAL_SAI_Receive() - - (+) Non Blocking mode functions with Interrupt are : - (++) HAL_SAI_Transmit_IT() - (++) HAL_SAI_Receive_IT() - - (+) Non Blocking mode functions with DMA are : - (++) HAL_SAI_Transmit_DMA() - (++) HAL_SAI_Receive_DMA() - - (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_SAI_TxCpltCallback() - (++) HAL_SAI_RxCpltCallback() - (++) HAL_SAI_ErrorCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmit an amount of data in blocking mode. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart = HAL_GetTick(); - - if ((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - if (hsai->State == HAL_SAI_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsai); - - hsai->XferSize = Size; - hsai->XferCount = Size; - hsai->pBuffPtr = pData; - hsai->State = HAL_SAI_STATE_BUSY_TX; - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - - /* Check if the SAI is already enabled */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET) - { - /* fill the fifo with data before to enabled the SAI */ - SAI_FillFifo(hsai); - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - - while (hsai->XferCount > 0U) - { - /* Write data if the FIFO is not full */ - if ((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) - { - if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) - { - hsai->Instance->DR = (*hsai->pBuffPtr++); - } - else if (hsai->Init.DataSize <= SAI_DATASIZE_16) - { - hsai->Instance->DR = *((uint16_t *)hsai->pBuffPtr); - hsai->pBuffPtr += 2U; - } - else - { - hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr); - hsai->pBuffPtr += 4U; - } - hsai->XferCount--; - } - else - { - /* Check for the Timeout */ - if ((Timeout != HAL_MAX_DELAY) && ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))) - { - /* Update error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; - - /* Clear all the flags */ - hsai->Instance->CLRFR = 0xFFFFFFFFU; - - /* Disable SAI peripheral */ - SAI_Disable(hsai); - - /* Flush the fifo */ - SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); - - /* Change the SAI state */ - hsai->State = HAL_SAI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_ERROR; - } - } - } - - hsai->State = HAL_SAI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart = HAL_GetTick(); - - if ((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - if (hsai->State == HAL_SAI_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsai); - - hsai->pBuffPtr = pData; - hsai->XferSize = Size; - hsai->XferCount = Size; - hsai->State = HAL_SAI_STATE_BUSY_RX; - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - - /* Check if the SAI is already enabled */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET) - { - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - - /* Receive data */ - while (hsai->XferCount > 0U) - { - if ((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY) - { - if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) - { - (*hsai->pBuffPtr++) = hsai->Instance->DR; - } - else if (hsai->Init.DataSize <= SAI_DATASIZE_16) - { - *((uint16_t *)hsai->pBuffPtr) = hsai->Instance->DR; - hsai->pBuffPtr += 2U; - } - else - { - *((uint32_t *)hsai->pBuffPtr) = hsai->Instance->DR; - hsai->pBuffPtr += 4U; - } - hsai->XferCount--; - } - else - { - /* Check for the Timeout */ - if ((Timeout != HAL_MAX_DELAY) && ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))) - { - /* Update error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; - - /* Clear all the flags */ - hsai->Instance->CLRFR = 0xFFFFFFFFU; - - /* Disable SAI peripheral */ - SAI_Disable(hsai); - - /* Flush the fifo */ - SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); - - /* Change the SAI state */ - hsai->State = HAL_SAI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_ERROR; - } - } - } - - hsai->State = HAL_SAI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) -{ - if ((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - if (hsai->State == HAL_SAI_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsai); - - hsai->pBuffPtr = pData; - hsai->XferSize = Size; - hsai->XferCount = Size; - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - hsai->State = HAL_SAI_STATE_BUSY_TX; - - if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) - { - hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit; - } - else if (hsai->Init.DataSize <= SAI_DATASIZE_16) - { - hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit; - } - else - { - hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit; - } - - /* Fill the fifo before starting the communication */ - SAI_FillFifo(hsai); - - /* Enable FRQ and OVRUDR interrupts */ - __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - - /* Check if the SAI is already enabled */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET) - { - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) -{ - if ((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - if (hsai->State == HAL_SAI_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsai); - - hsai->pBuffPtr = pData; - hsai->XferSize = Size; - hsai->XferCount = Size; - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - hsai->State = HAL_SAI_STATE_BUSY_RX; - - if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) - { - hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit; - } - else if (hsai->Init.DataSize <= SAI_DATASIZE_16) - { - hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit; - } - else - { - hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit; - } - - /* Enable TXE and OVRUDR interrupts */ - __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - - /* Check if the SAI is already enabled */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET) - { - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pause the audio stream playing from the Media. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai) -{ - /* Process Locked */ - __HAL_LOCK(hsai); - - /* Pause the audio file playing by disabling the SAI DMA requests */ - hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; -} - -/** - * @brief Resume the audio stream playing from the Media. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai) -{ - /* Process Locked */ - __HAL_LOCK(hsai); - - /* Enable the SAI DMA requests */ - hsai->Instance->CR1 |= SAI_xCR1_DMAEN; - - /* If the SAI peripheral is still not enabled, enable it */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET) - { - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; -} - -/** - * @brief Stop the audio stream playing from the Media. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(hsai); - - /* Disable the SAI DMA request */ - hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; - - /* Abort the SAI Tx DMA Stream */ - if ((hsai->hdmatx != NULL) && (hsai->State == HAL_SAI_STATE_BUSY_TX)) - { - if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) - { - /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } - } - - /* Abort the SAI Rx DMA Stream */ - if ((hsai->hdmarx != NULL) && (hsai->State == HAL_SAI_STATE_BUSY_RX)) - { - if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) - { - /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } - } - - /* Disable SAI peripheral */ - SAI_Disable(hsai); - - /* Flush the fifo */ - SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); - - /* Set hsai state to ready */ - hsai->State = HAL_SAI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return status; -} - -/** - * @brief Abort the current transfer and disable the SAI. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(hsai); - - /* Check SAI DMA is enabled or not */ - if ((hsai->Instance->CR1 & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) - { - /* Disable the SAI DMA request */ - hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; - - /* Abort the SAI Tx DMA Stream */ - if ((hsai->hdmatx != NULL) && (hsai->State == HAL_SAI_STATE_BUSY_TX)) - { - if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) - { - /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } - } - - /* Abort the SAI Rx DMA Stream */ - if ((hsai->hdmarx != NULL) && (hsai->State == HAL_SAI_STATE_BUSY_RX)) - { - if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) - { - /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } - } - } - - /* Disabled All interrupt and clear all the flag */ - hsai->Instance->IMR = 0U; - hsai->Instance->CLRFR = 0xFFFFFFFFU; - - /* Disable SAI peripheral */ - SAI_Disable(hsai); - - /* Flush the fifo */ - SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); - - /* Set hsai state to ready */ - hsai->State = HAL_SAI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return status; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with DMA. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart = HAL_GetTick(); - - if ((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - if (hsai->State == HAL_SAI_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsai); - - hsai->pBuffPtr = pData; - hsai->XferSize = Size; - hsai->XferCount = Size; - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - hsai->State = HAL_SAI_STATE_BUSY_TX; - - /* Set the SAI Tx DMA Half transfer complete callback */ - hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt; - - /* Set the SAI TxDMA transfer complete callback */ - hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt; - - /* Set the DMA error callback */ - hsai->hdmatx->XferErrorCallback = SAI_DMAError; - - /* Set the DMA Tx abort callback */ - hsai->hdmatx->XferAbortCallback = NULL; - - /* Enable the Tx DMA Stream */ - if (HAL_DMA_Start_IT(hsai->hdmatx, (uint32_t)hsai->pBuffPtr, (uint32_t)&hsai->Instance->DR, hsai->XferSize) != HAL_OK) - { - __HAL_UNLOCK(hsai); - return HAL_ERROR; - } - - /* Enable the interrupts for error handling */ - __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); - - /* Enable SAI Tx DMA Request */ - hsai->Instance->CR1 |= SAI_xCR1_DMAEN; - - /* Wait until FIFO is not empty */ - while ((hsai->Instance->SR & SAI_xSR_FLVL) == SAI_FIFOSTATUS_EMPTY) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > SAI_LONG_TIMEOUT) - { - /* Update error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_TIMEOUT; - } - } - - /* Check if the SAI is already enabled */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) - { - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in non-blocking mode with DMA. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) -{ - if ((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - if (hsai->State == HAL_SAI_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsai); - - hsai->pBuffPtr = pData; - hsai->XferSize = Size; - hsai->XferCount = Size; - hsai->ErrorCode = HAL_SAI_ERROR_NONE; - hsai->State = HAL_SAI_STATE_BUSY_RX; - - /* Set the SAI Rx DMA Half transfer complete callback */ - hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt; - - /* Set the SAI Rx DMA transfer complete callback */ - hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt; - - /* Set the DMA error callback */ - hsai->hdmarx->XferErrorCallback = SAI_DMAError; - - /* Set the DMA Rx abort callback */ - hsai->hdmarx->XferAbortCallback = NULL; - - /* Enable the Rx DMA Stream */ - if (HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, (uint32_t)hsai->pBuffPtr, hsai->XferSize) != HAL_OK) - { - __HAL_UNLOCK(hsai); - return HAL_ERROR; - } - - /* Enable the interrupts for error handling */ - __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); - - /* Enable SAI Rx DMA Request */ - hsai->Instance->CR1 |= SAI_xCR1_DMAEN; - - /* Check if the SAI is already enabled */ - if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET) - { - /* Enable SAI peripheral */ - __HAL_SAI_ENABLE(hsai); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hsai); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the Tx mute mode. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param val value sent during the mute @ref SAI_Block_Mute_Value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val) -{ - assert_param(IS_SAI_BLOCK_MUTE_VALUE(val)); - - if (hsai->State != HAL_SAI_STATE_RESET) - { - CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE); - SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | val); - return HAL_OK; - } - return HAL_ERROR; -} - -/** - * @brief Disable the Tx mute mode. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai) -{ - if (hsai->State != HAL_SAI_STATE_RESET) - { - CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE); - return HAL_OK; - } - return HAL_ERROR; -} - -/** - * @brief Enable the Rx mute detection. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param callback function called when the mute is detected. - * @param counter number a data before mute detection max 63. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter) -{ - assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter)); - - if (hsai->State != HAL_SAI_STATE_RESET) - { - /* set the mute counter */ - CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT); - SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << SAI_xCR2_MUTECNT_Pos)); - hsai->mutecallback = callback; - /* enable the IT interrupt */ - __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET); - return HAL_OK; - } - return HAL_ERROR; -} - -/** - * @brief Disable the Rx mute detection. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai) -{ - if (hsai->State != HAL_SAI_STATE_RESET) - { - /* set the mutecallback to NULL */ - hsai->mutecallback = (SAIcallback)NULL; - /* enable the IT interrupt */ - __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET); - return HAL_OK; - } - return HAL_ERROR; -} - -/** - * @brief Handle SAI interrupt request. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) -{ - if (hsai->State != HAL_SAI_STATE_RESET) - { - uint32_t itflags = hsai->Instance->SR; - uint32_t itsources = hsai->Instance->IMR; - uint32_t cr1config = hsai->Instance->CR1; - uint32_t tmperror; - - /* SAI Fifo request interrupt occurred ------------------------------------*/ - if (((itflags & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((itsources & SAI_IT_FREQ) == SAI_IT_FREQ)) - { - hsai->InterruptServiceRoutine(hsai); - } - /* SAI Overrun error interrupt occurred ----------------------------------*/ - else if (((itflags & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((itsources & SAI_IT_OVRUDR) == SAI_IT_OVRUDR)) - { - /* Clear the SAI Overrun flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); - - /* Get the SAI error code */ - tmperror = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR); - - /* Change the SAI error code */ - hsai->ErrorCode |= tmperror; - - /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - /* SAI mutedet interrupt occurred ----------------------------------*/ - else if (((itflags & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((itsources & SAI_IT_MUTEDET) == SAI_IT_MUTEDET)) - { - /* Clear the SAI mutedet flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET); - - /* call the call back function */ - if (hsai->mutecallback != (SAIcallback)NULL) - { - /* inform the user that an RX mute event has been detected */ - hsai->mutecallback(); - } - } - /* SAI AFSDET interrupt occurred ----------------------------------*/ - else if (((itflags & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((itsources & SAI_IT_AFSDET) == SAI_IT_AFSDET)) - { - /* Clear the SAI AFSDET flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_AFSDET); - - /* Change the SAI error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_AFSDET; - - /* Check SAI DMA is enabled or not */ - if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) - { - /* Abort the SAI DMA Streams */ - if (hsai->hdmatx != NULL) - { - /* Set the DMA Tx abort callback */ - hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; - - /* Abort DMA in IT mode */ - HAL_DMA_Abort_IT(hsai->hdmatx); - } - else if (hsai->hdmarx != NULL) - { - /* Set the DMA Rx abort callback */ - hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; - - /* Abort DMA in IT mode */ - HAL_DMA_Abort_IT(hsai->hdmarx); - } - } - else - { - /* Abort SAI */ - HAL_SAI_Abort(hsai); - - /* Set error callback */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - } - /* SAI LFSDET interrupt occurred ----------------------------------*/ - else if (((itflags & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((itsources & SAI_IT_LFSDET) == SAI_IT_LFSDET)) - { - /* Clear the SAI LFSDET flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_LFSDET); - - /* Change the SAI error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_LFSDET; - - /* Check SAI DMA is enabled or not */ - if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) - { - /* Abort the SAI DMA Streams */ - if (hsai->hdmatx != NULL) - { - /* Set the DMA Tx abort callback */ - hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; - - /* Abort DMA in IT mode */ - HAL_DMA_Abort_IT(hsai->hdmatx); - } - else if (hsai->hdmarx != NULL) - { - /* Set the DMA Rx abort callback */ - hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; - - /* Abort DMA in IT mode */ - HAL_DMA_Abort_IT(hsai->hdmarx); - } - } - else - { - /* Abort SAI */ - HAL_SAI_Abort(hsai); - - /* Set error callback */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - } - /* SAI WCKCFG interrupt occurred ----------------------------------*/ - else if (((itflags & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((itsources & SAI_IT_WCKCFG) == SAI_IT_WCKCFG)) - { - /* Clear the SAI WCKCFG flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_WCKCFG); - - /* Change the SAI error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_WCKCFG; - - /* Check SAI DMA is enabled or not */ - if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) - { - /* Abort the SAI DMA Streams */ - if (hsai->hdmatx != NULL) - { - /* Set the DMA Tx abort callback */ - hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; - - /* Abort DMA in IT mode */ - HAL_DMA_Abort_IT(hsai->hdmatx); - } - else if (hsai->hdmarx != NULL) - { - /* Set the DMA Rx abort callback */ - hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; - - /* Abort DMA in IT mode */ - HAL_DMA_Abort_IT(hsai->hdmarx); - } - } - else - { - /* If WCKCFG occurs, SAI audio block is automatically disabled */ - /* Disable all interrupts and clear all flags */ - hsai->Instance->IMR = 0U; - hsai->Instance->CLRFR = 0xFFFFFFFFU; - - /* Set the SAI state to ready to be able to start again the process */ - hsai->State = HAL_SAI_STATE_READY; - - /* Initialize XferCount */ - hsai->XferCount = 0U; - - /* SAI error Callback */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - } - /* SAI CNRDY interrupt occurred ----------------------------------*/ - else if (((itflags & SAI_FLAG_CNRDY) == SAI_FLAG_CNRDY) && ((itsources & SAI_IT_CNRDY) == SAI_IT_CNRDY)) - { - /* Clear the SAI CNRDY flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_CNRDY); - - /* Change the SAI error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_CNREADY; - - /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } - } -} - -/** - * @brief Tx Transfer completed callback. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx Transfer Half completed callback. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_TxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer half completed callback. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_RxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief SAI error callback. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsai); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SAI_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the SAI handle state. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval HAL state - */ -HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai) -{ - return hsai->State; -} - -/** - * @brief Return the SAI error code. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for the specified SAI Block. - * @retval SAI Error Code - */ -uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai) -{ - return hsai->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup SAI_Private_Functions - * @brief Private functions - * @{ - */ - -/** - * @brief Initialize the SAI I2S protocol according to the specified parameters - * in the SAI_InitTypeDef and create the associated handle. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param protocol one of the supported protocol. - * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize - * the configuration information for SAI module. - * @param nbslot number of slot minimum value is 2 and max is 16. - * the value must be a multiple of 2. - * @retval HAL status - */ -static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) -{ - hsai->Init.Protocol = SAI_FREE_PROTOCOL; - hsai->Init.FirstBit = SAI_FIRSTBIT_MSB; - /* Compute ClockStrobing according AudioMode */ - if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) - { - /* Transmit */ - hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; - } - else - { - /* Receive */ - hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE; - } - hsai->FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION; - hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; - hsai->SlotInit.FirstBitOffset = 0U; - hsai->SlotInit.SlotNumber = nbslot; - - /* in IS2 the number of slot must be even */ - if ((nbslot & 0x1U) != 0U) - { - return HAL_ERROR; - } - - if (protocol == SAI_I2S_STANDARD) - { - hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; - hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; - } - else - { - /* SAI_I2S_MSBJUSTIFIED or SAI_I2S_LSBJUSTIFIED */ - hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; - hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT; - } - - /* Frame definition */ - switch (datasize) - { - case SAI_PROTOCOL_DATASIZE_16BIT: - hsai->Init.DataSize = SAI_DATASIZE_16; - hsai->FrameInit.FrameLength = 32U * (nbslot / 2U); - hsai->FrameInit.ActiveFrameLength = 16U * (nbslot / 2U); - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B; - break; - case SAI_PROTOCOL_DATASIZE_16BITEXTENDED : - hsai->Init.DataSize = SAI_DATASIZE_16; - hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); - hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; - break; - case SAI_PROTOCOL_DATASIZE_24BIT: - hsai->Init.DataSize = SAI_DATASIZE_24; - hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); - hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; - break; - case SAI_PROTOCOL_DATASIZE_32BIT: - hsai->Init.DataSize = SAI_DATASIZE_32; - hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); - hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; - break; - default : - return HAL_ERROR; - } - if (protocol == SAI_I2S_LSBJUSTIFIED) - { - if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) - { - hsai->SlotInit.FirstBitOffset = 16U; - } - if (datasize == SAI_PROTOCOL_DATASIZE_24BIT) - { - hsai->SlotInit.FirstBitOffset = 8U; - } - } - return HAL_OK; -} - -/** - * @brief Initialize the SAI PCM protocol according to the specified parameters - * in the SAI_InitTypeDef and create the associated handle. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param protocol one of the supported protocol - * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize - * @param nbslot number of slot minimum value is 1 and the max is 16. - * @retval HAL status - */ -static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) -{ - hsai->Init.Protocol = SAI_FREE_PROTOCOL; - hsai->Init.FirstBit = SAI_FIRSTBIT_MSB; - /* Compute ClockStrobing according AudioMode */ - if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) - { - /* Transmit */ - hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE; - } - else - { - /* Receive */ - hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; - } - hsai->FrameInit.FSDefinition = SAI_FS_STARTFRAME; - hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; - hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; - hsai->SlotInit.FirstBitOffset = 0U; - hsai->SlotInit.SlotNumber = nbslot; - hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; - - if (protocol == SAI_PCM_SHORT) - { - hsai->FrameInit.ActiveFrameLength = 1; - } - else - { - /* SAI_PCM_LONG */ - hsai->FrameInit.ActiveFrameLength = 13; - } - - switch (datasize) - { - case SAI_PROTOCOL_DATASIZE_16BIT: - hsai->Init.DataSize = SAI_DATASIZE_16; - hsai->FrameInit.FrameLength = 16U * nbslot; - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B; - break; - case SAI_PROTOCOL_DATASIZE_16BITEXTENDED : - hsai->Init.DataSize = SAI_DATASIZE_16; - hsai->FrameInit.FrameLength = 32U * nbslot; - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; - break; - case SAI_PROTOCOL_DATASIZE_24BIT : - hsai->Init.DataSize = SAI_DATASIZE_24; - hsai->FrameInit.FrameLength = 32U * nbslot; - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; - break; - case SAI_PROTOCOL_DATASIZE_32BIT: - hsai->Init.DataSize = SAI_DATASIZE_32; - hsai->FrameInit.FrameLength = 32U * nbslot; - hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; - break; - default : - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Fill the fifo. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_FillFifo(SAI_HandleTypeDef *hsai) -{ - /* fill the fifo with data before to enabled the SAI */ - while (((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) && (hsai->XferCount > 0U)) - { - if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) - { - hsai->Instance->DR = (*hsai->pBuffPtr++); - } - else if (hsai->Init.DataSize <= SAI_DATASIZE_16) - { - hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr); - hsai->pBuffPtr += 2U; - } - else - { - hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr); - hsai->pBuffPtr += 4U; - } - hsai->XferCount--; - } -} - -/** - * @brief Return the interrupt flag to set according the SAI setup. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @param mode SAI_MODE_DMA or SAI_MODE_IT - * @retval the list of the IT flag to enable - */ -static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode) -{ - uint32_t tmpIT = SAI_IT_OVRUDR; - - if (mode == SAI_MODE_IT) - { - tmpIT |= SAI_IT_FREQ; - } - - if ((hsai->Init.Protocol == SAI_AC97_PROTOCOL) && - ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODEMASTER_RX))) - { - tmpIT |= SAI_IT_CNRDY; - } - - if ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) - { - tmpIT |= SAI_IT_AFSDET | SAI_IT_LFSDET; - } - else - { - /* hsai has been configured in master mode */ - tmpIT |= SAI_IT_WCKCFG; - } - return tmpIT; -} - -/** - * @brief Disable the SAI and wait for the disabling. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai) -{ - uint32_t count = SAI_DEFAULT_TIMEOUT * (SystemCoreClock / 7U / 1000U); - HAL_StatusTypeDef status = HAL_OK; - - /* Disable the SAI instance */ - __HAL_SAI_DISABLE(hsai); - - do - { - /* Check for the Timeout */ - if (count-- == 0U) - { - /* Update error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; - status = HAL_TIMEOUT; - break; - } - } - while ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != RESET); - - return status; -} - -/** - * @brief Tx Handler for Transmit in Interrupt mode 8-Bit transfer. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai) -{ - if (hsai->XferCount == 0U) - { - /* Handle the end of the transmission */ - /* Disable FREQ and OVRUDR interrupts */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - hsai->State = HAL_SAI_STATE_READY; -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->TxCpltCallback(hsai); -#else - HAL_SAI_TxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - else - { - /* Write data on DR register */ - hsai->Instance->DR = (*hsai->pBuffPtr++); - hsai->XferCount--; - } -} - -/** - * @brief Tx Handler for Transmit in Interrupt mode for 16-Bit transfer. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai) -{ - if (hsai->XferCount == 0U) - { - /* Handle the end of the transmission */ - /* Disable FREQ and OVRUDR interrupts */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - hsai->State = HAL_SAI_STATE_READY; -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->TxCpltCallback(hsai); -#else - HAL_SAI_TxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - else - { - /* Write data on DR register */ - hsai->Instance->DR = *(uint16_t *)hsai->pBuffPtr; - hsai->pBuffPtr += 2U; - hsai->XferCount--; - } -} - -/** - * @brief Tx Handler for Transmit in Interrupt mode for 32-Bit transfer. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai) -{ - if (hsai->XferCount == 0U) - { - /* Handle the end of the transmission */ - /* Disable FREQ and OVRUDR interrupts */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - hsai->State = HAL_SAI_STATE_READY; -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->TxCpltCallback(hsai); -#else - HAL_SAI_TxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } - else - { - /* Write data on DR register */ - hsai->Instance->DR = *(uint32_t *)hsai->pBuffPtr; - hsai->pBuffPtr += 4U; - hsai->XferCount--; - } -} - -/** - * @brief Rx Handler for Receive in Interrupt mode 8-Bit transfer. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai) -{ - /* Receive data */ - (*hsai->pBuffPtr++) = hsai->Instance->DR; - hsai->XferCount--; - - /* Check end of the transfer */ - if (hsai->XferCount == 0U) - { - /* Disable TXE and OVRUDR interrupts */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - - /* Clear the SAI Overrun flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); - - hsai->State = HAL_SAI_STATE_READY; -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->RxCpltCallback(hsai); -#else - HAL_SAI_RxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Rx Handler for Receive in Interrupt mode for 16-Bit transfer. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai) -{ - /* Receive data */ - *(uint16_t *)hsai->pBuffPtr = hsai->Instance->DR; - hsai->pBuffPtr += 2U; - hsai->XferCount--; - - /* Check end of the transfer */ - if (hsai->XferCount == 0U) - { - /* Disable TXE and OVRUDR interrupts */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - - /* Clear the SAI Overrun flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); - - hsai->State = HAL_SAI_STATE_READY; -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->RxCpltCallback(hsai); -#else - HAL_SAI_RxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Rx Handler for Receive in Interrupt mode for 32-Bit transfer. - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval None - */ -static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai) -{ - /* Receive data */ - *(uint32_t *)hsai->pBuffPtr = hsai->Instance->DR; - hsai->pBuffPtr += 4U; - hsai->XferCount--; - - /* Check end of the transfer */ - if (hsai->XferCount == 0U) - { - /* Disable TXE and OVRUDR interrupts */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); - - /* Clear the SAI Overrun flag */ - __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); - - hsai->State = HAL_SAI_STATE_READY; -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->RxCpltCallback(hsai); -#else - HAL_SAI_RxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA SAI transmit process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma) -{ - SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma->Init.Mode != DMA_CIRCULAR) - { - hsai->XferCount = 0U; - - /* Disable SAI Tx DMA Request */ - hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); - - /* Stop the interrupts error handling */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); - - hsai->State = HAL_SAI_STATE_READY; - } -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->TxCpltCallback(hsai); -#else - HAL_SAI_TxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SAI transmit process half complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->TxHalfCpltCallback(hsai); -#else - HAL_SAI_TxHalfCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SAI receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma) -{ - SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma->Init.Mode != DMA_CIRCULAR) - { - /* Disable Rx DMA Request */ - hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); - hsai->XferCount = 0U; - - /* Stop the interrupts error handling */ - __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); - - hsai->State = HAL_SAI_STATE_READY; - } -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->RxCpltCallback(hsai); -#else - HAL_SAI_RxCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SAI receive process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->RxHalfCpltCallback(hsai); -#else - HAL_SAI_RxHalfCpltCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SAI communication error callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SAI_DMAError(DMA_HandleTypeDef *hdma) -{ - SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Set SAI error code */ - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - - if ((hsai->hdmatx->ErrorCode == HAL_DMA_ERROR_TE) || (hsai->hdmarx->ErrorCode == HAL_DMA_ERROR_TE)) - { - /* Disable the SAI DMA request */ - hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; - - /* Disable SAI peripheral */ - SAI_Disable(hsai); - - /* Set the SAI state ready to be able to start again the process */ - hsai->State = HAL_SAI_STATE_READY; - - /* Initialize XferCount */ - hsai->XferCount = 0U; - } - /* SAI error Callback */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SAI Abort callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SAI_DMAAbort(DMA_HandleTypeDef *hdma) -{ - SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable DMA request */ - hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; - - /* Disable all interrupts and clear all flags */ - hsai->Instance->IMR = 0U; - hsai->Instance->CLRFR = 0xFFFFFFFFU; - - if (hsai->ErrorCode != HAL_SAI_ERROR_WCKCFG) - { - /* Disable SAI peripheral */ - SAI_Disable(hsai); - - /* Flush the fifo */ - SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); - } - /* Set the SAI state to ready to be able to start again the process */ - hsai->State = HAL_SAI_STATE_READY; - - /* Initialize XferCount */ - hsai->XferCount = 0U; - - /* SAI error Callback */ -#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) - hsai->ErrorCallback(hsai); -#else - HAL_SAI_ErrorCallback(hsai); -#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ -} - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ -#endif /* HAL_SAI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c deleted file mode 100644 index 78a73f8..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c +++ /dev/null @@ -1,310 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sai_ex.c - * @author MCD Application Team - * @brief SAI Extension HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of SAI extension peripheral: - * + Extension features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### SAI peripheral extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the SAI interface for STM32F446xx - devices contains the following additional features : - - (+) Possibility to be clocked from PLLR - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to manage several sources to clock SAI - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SAIEx SAIEx - * @brief SAI Extension HAL module driver - * @{ - */ - -#ifdef HAL_SAI_MODULE_ENABLED - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || \ - defined(STM32F423xx) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* SAI registers Masks */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup SAI_Private_Functions SAI Private Functions - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions - * @{ - */ - -/** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions - * @brief Extension features functions - * -@verbatim - =============================================================================== - ##### Extension features Functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the possible - SAI clock sources. - -@endverbatim - * @{ - */ - -/** - * @brief Configure SAI Block synchronization mode - * @param hsai pointer to a SAI_HandleTypeDef structure that contains - * the configuration information for SAI module. - * @retval SAI Clock Input - */ -void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai) -{ - uint32_t tmpregisterGCR; - -#if defined(STM32F446xx) - /* This setting must be done with both audio block (A & B) disabled */ - switch (hsai->Init.SynchroExt) - { - case SAI_SYNCEXT_DISABLE : - tmpregisterGCR = 0U; - break; - case SAI_SYNCEXT_OUTBLOCKA_ENABLE : - tmpregisterGCR = SAI_GCR_SYNCOUT_0; - break; - case SAI_SYNCEXT_OUTBLOCKB_ENABLE : - tmpregisterGCR = SAI_GCR_SYNCOUT_1; - break; - default: - tmpregisterGCR = 0U; - break; - } - - if ((hsai->Init.Synchro) == SAI_SYNCHRONOUS_EXT_SAI2) - { - tmpregisterGCR |= SAI_GCR_SYNCIN_0; - } - - if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) - { - SAI1->GCR = tmpregisterGCR; - } - else - { - SAI2->GCR = tmpregisterGCR; - } -#endif /* STM32F446xx */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx) - /* This setting must be done with both audio block (A & B) disabled */ - switch (hsai->Init.SynchroExt) - { - case SAI_SYNCEXT_DISABLE : - tmpregisterGCR = 0U; - break; - case SAI_SYNCEXT_OUTBLOCKA_ENABLE : - tmpregisterGCR = SAI_GCR_SYNCOUT_0; - break; - case SAI_SYNCEXT_OUTBLOCKB_ENABLE : - tmpregisterGCR = SAI_GCR_SYNCOUT_1; - break; - default: - tmpregisterGCR = 0U; - break; - } - SAI1->GCR = tmpregisterGCR; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ -} -/** -* @brief Get SAI Input Clock based on SAI source clock selection -* @param hsai pointer to a SAI_HandleTypeDef structure that contains -* the configuration information for SAI module. -* @retval SAI Clock Input -*/ -uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai) -{ - /* This variable used to store the SAI_CK_x (value in Hz) */ - uint32_t saiclocksource = 0U; - -#if defined(STM32F446xx) - if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) - { - saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1); - } - else /* SAI2_Block_A || SAI2_Block_B*/ - { - saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2); - } -#endif /* STM32F446xx */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx) - uint32_t vcoinput = 0U, tmpreg = 0U; - - /* Check the SAI Block parameters */ - assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource)); - - /* SAI Block clock source selection */ - if (hsai->Instance == SAI1_Block_A) - { - __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource); - } - else - { - __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2U)); - } - - /* VCO Input Clock value calculation */ - if ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } -#if defined(STM32F413xx) || defined(STM32F423xx) - /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */ - if (hsai->Init.ClockSource == SAI_CLKSOURCE_PLLR) - { - /* Configure the PLLI2S division factor */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - /* SAI_CLK(first level) = PLL_VCO Output/PLLR */ - tmpreg = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U; - saiclocksource = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U)) / (tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLDIVR) >> 8U) + 1U); - - saiclocksource = saiclocksource / (tmpreg); - - } - else if (hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S) - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SR */ - tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U; - saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U)) / (tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVR */ - tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVR) + 1U); - saiclocksource = saiclocksource / (tmpreg); - } - else if (hsai->Init.ClockSource == SAI_CLKSOURCE_HS) - { - if ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - saiclocksource = (uint32_t)(HSE_VALUE); - } - else - { - /* Get the I2S source clock value */ - saiclocksource = (uint32_t)(HSI_VALUE); - } - } - else /* sConfig->ClockSource == SAI_CLKSource_Ext */ - { - saiclocksource = EXTERNAL_CLOCK_VALUE; - } -#else - /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */ - if (hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI) - { - /* Configure the PLLI2S division factor */ - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U; - saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U)) / (tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U); - saiclocksource = saiclocksource / (tmpreg); - - } - else if (hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S) - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U; - saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U)) / (tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U); - saiclocksource = saiclocksource / (tmpreg); - } - else /* sConfig->ClockSource == SAI_CLKSource_Ext */ - { - /* Enable the External Clock selection */ - __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT); - - saiclocksource = EXTERNAL_CLOCK_VALUE; - } -#endif /* STM32F413xx || STM32F423xx */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ - /* the return result is the value of SAI clock */ - return saiclocksource; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ -#endif /* HAL_SAI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c deleted file mode 100644 index 31633a2..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c +++ /dev/null @@ -1,1308 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sdram.c - * @author MCD Application Team - * @brief SDRAM HAL module driver. - * This file provides a generic firmware to drive SDRAM memories mounted - * as external device. - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - This driver is a generic layered driver which contains a set of APIs used to - control SDRAM memories. It uses the FMC layer functions to interface - with SDRAM devices. - The following sequence should be followed to configure the FMC to interface - with SDRAM memories: - - (#) Declare a SDRAM_HandleTypeDef handle structure, for example: - SDRAM_HandleTypeDef hsdram - - (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed - values of the structure member. - - (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined - base register instance for NOR or SDRAM device - - (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example: - FMC_SDRAM_TimingTypeDef Timing; - and fill its fields with the allowed values of the structure member. - - (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function - performs the following sequence: - - (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit() - (##) Control register configuration using the FMC SDRAM interface function - FMC_SDRAM_Init() - (##) Timing register configuration using the FMC SDRAM interface function - FMC_SDRAM_Timing_Init() - (##) Program the SDRAM external device by applying its initialization sequence - according to the device plugged in your hardware. This step is mandatory - for accessing the SDRAM device. - - (#) At this stage you can perform read/write accesses from/to the memory connected - to the SDRAM Bank. You can perform either polling or DMA transfer using the - following APIs: - (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access - (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer - - (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/ - HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or - the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM - device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef - structure. - - (#) You can continuously monitor the SDRAM device HAL state by calling the function - HAL_SDRAM_GetState() - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - Use Functions HAL_SDRAM_RegisterCallback() to register a user callback, - it allows to register following callbacks: - (+) MspInitCallback : SDRAM MspInit. - (+) MspDeInitCallback : SDRAM MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - Use function HAL_SDRAM_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. It allows to reset following callbacks: - (+) MspInitCallback : SDRAM MspInit. - (+) MspDeInitCallback : SDRAM MspDeInit. - This function) takes as parameters the HAL peripheral handle and the Callback ID. - - By default, after the HAL_SDRAM_Init and if the state is HAL_SDRAM_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions. - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_SDRAM_Init - and HAL_SDRAM_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_SDRAM_Init and HAL_SDRAM_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) - - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_SDRAM_RegisterCallback before calling HAL_SDRAM_DeInit - or HAL_SDRAM_Init function. - - When The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -#if defined(FMC_Bank5_6) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - -/** @defgroup SDRAM SDRAM - * @brief SDRAM driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void SDRAM_DMACplt(DMA_HandleTypeDef *hdma); -static void SDRAM_DMACpltProt(DMA_HandleTypeDef *hdma); -static void SDRAM_DMAError(DMA_HandleTypeDef *hdma); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions - * @{ - */ - -/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - ============================================================================== - ##### SDRAM Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to initialize/de-initialize - the SDRAM memory - -@endverbatim - * @{ - */ - -/** - * @brief Performs the SDRAM device initialization sequence. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param Timing Pointer to SDRAM control timing structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing) -{ - /* Check the SDRAM handle parameter */ - if (hsdram == NULL) - { - return HAL_ERROR; - } - - if (hsdram->State == HAL_SDRAM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hsdram->Lock = HAL_UNLOCKED; -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - if (hsdram->MspInitCallback == NULL) - { - hsdram->MspInitCallback = HAL_SDRAM_MspInit; - } - hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback; - hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback; - hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback; - - /* Init the low level hardware */ - hsdram->MspInitCallback(hsdram); -#else - /* Initialize the low level hardware (MSP) */ - HAL_SDRAM_MspInit(hsdram); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ - } - - /* Initialize the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Initialize SDRAM control Interface */ - (void)FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init)); - - /* Initialize SDRAM timing Interface */ - (void)FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank); - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Perform the SDRAM device initialization sequence. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram) -{ -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - if (hsdram->MspDeInitCallback == NULL) - { - hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; - } - - /* DeInit the low level hardware */ - hsdram->MspDeInitCallback(hsdram); -#else - /* Initialize the low level hardware (MSP) */ - HAL_SDRAM_MspDeInit(hsdram); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ - - /* Configure the SDRAM registers with their reset values */ - (void)FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank); - - /* Reset the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hsdram); - - return HAL_OK; -} - -/** - * @brief SDRAM MSP Init. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval None - */ -__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsdram); - - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_SDRAM_MspInit could be implemented in the user file - */ -} - -/** - * @brief SDRAM MSP DeInit. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval None - */ -__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsdram); - - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_SDRAM_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief This function handles SDRAM refresh error interrupt request. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval HAL status - */ -void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram) -{ - /* Check SDRAM interrupt Rising edge flag */ - if (__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT)) - { - /* SDRAM refresh error interrupt callback */ -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - hsdram->RefreshErrorCallback(hsdram); -#else - HAL_SDRAM_RefreshErrorCallback(hsdram); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ - - /* Clear SDRAM refresh error interrupt pending bit */ - __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR); - } -} - -/** - * @brief SDRAM Refresh error callback. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval None - */ -__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsdram); - - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file - */ -} - -/** - * @brief DMA transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdma); - - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file - */ -} - -/** - * @brief DMA transfer complete error callback. - * @param hdma DMA handle - * @retval None - */ -__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdma); - - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions - * @brief Input Output and memory control functions - * - @verbatim - ============================================================================== - ##### SDRAM Input and Output functions ##### - ============================================================================== - [..] - This section provides functions allowing to use and control the SDRAM memory - -@endverbatim - * @{ - */ - -/** - * @brief Reads 8-bit data buffer from the SDRAM memory. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to read start address - * @param pDstBuffer Pointer to destination buffer - * @param BufferSize Size of the buffer to read from memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, - uint32_t BufferSize) -{ - uint32_t size; - __IO uint8_t *pSdramAddress = (uint8_t *)pAddress; - uint8_t *pdestbuff = pDstBuffer; - HAL_SDRAM_StateTypeDef state = hsdram->State; - - /* Check the SDRAM controller state */ - if (state == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Read data from source */ - for (size = BufferSize; size != 0U; size--) - { - *pdestbuff = *(__IO uint8_t *)pSdramAddress; - pdestbuff++; - pSdramAddress++; - } - - /* Update the SDRAM controller state */ - hsdram->State = state; - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Writes 8-bit data buffer to SDRAM memory. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to write start address - * @param pSrcBuffer Pointer to source buffer to write - * @param BufferSize Size of the buffer to write to memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, - uint32_t BufferSize) -{ - uint32_t size; - __IO uint8_t *pSdramAddress = (uint8_t *)pAddress; - uint8_t *psrcbuff = pSrcBuffer; - - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Write data to memory */ - for (size = BufferSize; size != 0U; size--) - { - *(__IO uint8_t *)pSdramAddress = *psrcbuff; - psrcbuff++; - pSdramAddress++; - } - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Reads 16-bit data buffer from the SDRAM memory. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to read start address - * @param pDstBuffer Pointer to destination buffer - * @param BufferSize Size of the buffer to read from memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, - uint32_t BufferSize) -{ - uint32_t size; - __IO uint32_t *pSdramAddress = pAddress; - uint16_t *pdestbuff = pDstBuffer; - HAL_SDRAM_StateTypeDef state = hsdram->State; - - /* Check the SDRAM controller state */ - if (state == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Read data from memory */ - for (size = BufferSize; size >= 2U ; size -= 2U) - { - *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU); - pdestbuff++; - *pdestbuff = (uint16_t)(((*pSdramAddress) & 0xFFFF0000U) >> 16U); - pdestbuff++; - pSdramAddress++; - } - - /* Read last 16-bits if size is not 32-bits multiple */ - if ((BufferSize % 2U) != 0U) - { - *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU); - } - - /* Update the SDRAM controller state */ - hsdram->State = state; - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Writes 16-bit data buffer to SDRAM memory. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to write start address - * @param pSrcBuffer Pointer to source buffer to write - * @param BufferSize Size of the buffer to write to memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, - uint32_t BufferSize) -{ - uint32_t size; - __IO uint32_t *psdramaddress = pAddress; - uint16_t *psrcbuff = pSrcBuffer; - - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Write data to memory */ - for (size = BufferSize; size >= 2U ; size -= 2U) - { - *psdramaddress = (uint32_t)(*psrcbuff); - psrcbuff++; - *psdramaddress |= ((uint32_t)(*psrcbuff) << 16U); - psrcbuff++; - psdramaddress++; - } - - /* Write last 16-bits if size is not 32-bits multiple */ - if ((BufferSize % 2U) != 0U) - { - *psdramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psdramaddress) & 0xFFFF0000U); - } - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Reads 32-bit data buffer from the SDRAM memory. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to read start address - * @param pDstBuffer Pointer to destination buffer - * @param BufferSize Size of the buffer to read from memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, - uint32_t BufferSize) -{ - uint32_t size; - __IO uint32_t *pSdramAddress = (uint32_t *)pAddress; - uint32_t *pdestbuff = pDstBuffer; - HAL_SDRAM_StateTypeDef state = hsdram->State; - - /* Check the SDRAM controller state */ - if (state == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Read data from source */ - for (size = BufferSize; size != 0U; size--) - { - *pdestbuff = *(__IO uint32_t *)pSdramAddress; - pdestbuff++; - pSdramAddress++; - } - - /* Update the SDRAM controller state */ - hsdram->State = state; - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Writes 32-bit data buffer to SDRAM memory. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to write start address - * @param pSrcBuffer Pointer to source buffer to write - * @param BufferSize Size of the buffer to write to memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, - uint32_t BufferSize) -{ - uint32_t size; - __IO uint32_t *pSdramAddress = pAddress; - uint32_t *psrcbuff = pSrcBuffer; - - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Write data to memory */ - for (size = BufferSize; size != 0U; size--) - { - *pSdramAddress = *psrcbuff; - psrcbuff++; - pSdramAddress++; - } - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Reads a Words data from the SDRAM memory using DMA transfer. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to read start address - * @param pDstBuffer Pointer to destination buffer - * @param BufferSize Size of the buffer to read from memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, - uint32_t BufferSize) -{ - HAL_StatusTypeDef status; - HAL_SDRAM_StateTypeDef state = hsdram->State; - - /* Check the SDRAM controller state */ - if (state == HAL_SDRAM_STATE_BUSY) - { - status = HAL_BUSY; - } - else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Configure DMA user callbacks */ - if (state == HAL_SDRAM_STATE_READY) - { - hsdram->hdma->XferCpltCallback = SDRAM_DMACplt; - } - else - { - hsdram->hdma->XferCpltCallback = SDRAM_DMACpltProt; - } - hsdram->hdma->XferErrorCallback = SDRAM_DMAError; - - /* Enable the DMA Stream */ - status = HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize); - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Writes a Words data buffer to SDRAM memory using DMA transfer. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param pAddress Pointer to write start address - * @param pSrcBuffer Pointer to source buffer to write - * @param BufferSize Size of the buffer to write to memory - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, - uint32_t BufferSize) -{ - HAL_StatusTypeDef status; - - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - status = HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsdram); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Configure DMA user callbacks */ - hsdram->hdma->XferCpltCallback = SDRAM_DMACplt; - hsdram->hdma->XferErrorCallback = SDRAM_DMAError; - - /* Enable the DMA Stream */ - status = HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize); - - /* Process Unlocked */ - __HAL_UNLOCK(hsdram); - } - else - { - status = HAL_ERROR; - } - - return status; -} - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User SDRAM Callback - * To be used instead of the weak (surcharged) predefined callback - * @param hsdram : SDRAM handle - * @param CallbackId : ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_SDRAM_MSP_INIT_CB_ID SDRAM MspInit callback ID - * @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID SDRAM MspDeInit callback ID - * @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID SDRAM Refresh Error callback ID - * @param pCallback : pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, - pSDRAM_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - HAL_SDRAM_StateTypeDef state; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hsdram); - - state = hsdram->State; - if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - switch (CallbackId) - { - case HAL_SDRAM_MSP_INIT_CB_ID : - hsdram->MspInitCallback = pCallback; - break; - case HAL_SDRAM_MSP_DEINIT_CB_ID : - hsdram->MspDeInitCallback = pCallback; - break; - case HAL_SDRAM_REFRESH_ERR_CB_ID : - hsdram->RefreshErrorCallback = pCallback; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (hsdram->State == HAL_SDRAM_STATE_RESET) - { - switch (CallbackId) - { - case HAL_SDRAM_MSP_INIT_CB_ID : - hsdram->MspInitCallback = pCallback; - break; - case HAL_SDRAM_MSP_DEINIT_CB_ID : - hsdram->MspDeInitCallback = pCallback; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsdram); - return status; -} - -/** - * @brief Unregister a User SDRAM Callback - * SDRAM Callback is redirected to the weak (surcharged) predefined callback - * @param hsdram : SDRAM handle - * @param CallbackId : ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_SDRAM_MSP_INIT_CB_ID SDRAM MspInit callback ID - * @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID SDRAM MspDeInit callback ID - * @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID SDRAM Refresh Error callback ID - * @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID SDRAM DMA Xfer Complete callback ID - * @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID SDRAM DMA Xfer Error callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId) -{ - HAL_StatusTypeDef status = HAL_OK; - HAL_SDRAM_StateTypeDef state; - - /* Process locked */ - __HAL_LOCK(hsdram); - - state = hsdram->State; - if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - switch (CallbackId) - { - case HAL_SDRAM_MSP_INIT_CB_ID : - hsdram->MspInitCallback = HAL_SDRAM_MspInit; - break; - case HAL_SDRAM_MSP_DEINIT_CB_ID : - hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; - break; - case HAL_SDRAM_REFRESH_ERR_CB_ID : - hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback; - break; - case HAL_SDRAM_DMA_XFER_CPLT_CB_ID : - hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback; - break; - case HAL_SDRAM_DMA_XFER_ERR_CB_ID : - hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (hsdram->State == HAL_SDRAM_STATE_RESET) - { - switch (CallbackId) - { - case HAL_SDRAM_MSP_INIT_CB_ID : - hsdram->MspInitCallback = HAL_SDRAM_MspInit; - break; - case HAL_SDRAM_MSP_DEINIT_CB_ID : - hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsdram); - return status; -} - -/** - * @brief Register a User SDRAM Callback for DMA transfers - * To be used instead of the weak (surcharged) predefined callback - * @param hsdram : SDRAM handle - * @param CallbackId : ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID SDRAM DMA Xfer Complete callback ID - * @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID SDRAM DMA Xfer Error callback ID - * @param pCallback : pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, - pSDRAM_DmaCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - HAL_SDRAM_StateTypeDef state; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hsdram); - - state = hsdram->State; - if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) - { - switch (CallbackId) - { - case HAL_SDRAM_DMA_XFER_CPLT_CB_ID : - hsdram->DmaXferCpltCallback = pCallback; - break; - case HAL_SDRAM_DMA_XFER_ERR_CB_ID : - hsdram->DmaXferErrorCallback = pCallback; - break; - default : - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsdram); - return status; -} -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup SDRAM_Exported_Functions_Group3 Control functions - * @brief management functions - * -@verbatim - ============================================================================== - ##### SDRAM Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the SDRAM interface. - -@endverbatim - * @{ - */ - -/** - * @brief Enables dynamically SDRAM write protection. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram) -{ - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Enable write protection */ - (void)FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank); - - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Disables dynamically SDRAM write protection. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram) -{ - HAL_SDRAM_StateTypeDef state = hsdram->State; - - /* Check the SDRAM controller state */ - if (state == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (state == HAL_SDRAM_STATE_WRITE_PROTECTED) - { - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Disable write protection */ - (void)FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank); - - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_READY; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Sends Command to the SDRAM bank. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param Command SDRAM command structure - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, - uint32_t Timeout) -{ - HAL_SDRAM_StateTypeDef state = hsdram->State; - - /* Check the SDRAM controller state */ - if (state == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_PRECHARGED)) - { - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Send SDRAM command */ - (void)FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout); - - /* Update the SDRAM controller state state */ - if (Command->CommandMode == FMC_SDRAM_CMD_PALL) - { - hsdram->State = HAL_SDRAM_STATE_PRECHARGED; - } - else - { - hsdram->State = HAL_SDRAM_STATE_READY; - } - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Programs the SDRAM Memory Refresh rate. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param RefreshRate The SDRAM refresh rate value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate) -{ - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Program the refresh rate */ - (void)FMC_SDRAM_ProgramRefreshRate(hsdram->Instance, RefreshRate); - - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_READY; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @param AutoRefreshNumber The SDRAM auto Refresh number - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber) -{ - /* Check the SDRAM controller state */ - if (hsdram->State == HAL_SDRAM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (hsdram->State == HAL_SDRAM_STATE_READY) - { - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_BUSY; - - /* Set the Auto-Refresh number */ - (void)FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance, AutoRefreshNumber); - - /* Update the SDRAM state */ - hsdram->State = HAL_SDRAM_STATE_READY; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Returns the SDRAM memory current mode. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval The SDRAM memory mode. - */ -uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram) -{ - /* Return the SDRAM memory current mode */ - return (FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank)); -} - -/** - * @} - */ - -/** @defgroup SDRAM_Exported_Functions_Group4 State functions - * @brief Peripheral State functions - * -@verbatim - ============================================================================== - ##### SDRAM State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the SDRAM controller - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the SDRAM state. - * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains - * the configuration information for SDRAM module. - * @retval HAL state - */ -HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram) -{ - return hsdram->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @brief DMA SDRAM process complete callback. - * @param hdma : DMA handle - * @retval None - */ -static void SDRAM_DMACplt(DMA_HandleTypeDef *hdma) -{ - SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent); - - /* Disable the DMA channel */ - __HAL_DMA_DISABLE(hdma); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_READY; - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - hsdram->DmaXferCpltCallback(hdma); -#else - HAL_SDRAM_DMA_XferCpltCallback(hdma); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SRAM process complete callback. - * @param hdma : DMA handle - * @retval None - */ -static void SDRAM_DMACpltProt(DMA_HandleTypeDef *hdma) -{ - SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent); - - /* Disable the DMA channel */ - __HAL_DMA_DISABLE(hdma); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED; - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - hsdram->DmaXferCpltCallback(hdma); -#else - HAL_SDRAM_DMA_XferCpltCallback(hdma); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SDRAM error callback. - * @param hdma : DMA handle - * @retval None - */ -static void SDRAM_DMAError(DMA_HandleTypeDef *hdma) -{ - SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent); - - /* Disable the DMA channel */ - __HAL_DMA_DISABLE(hdma); - - /* Update the SDRAM controller state */ - hsdram->State = HAL_SDRAM_STATE_ERROR; - -#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) - hsdram->DmaXferErrorCallback(hdma); -#else - HAL_SDRAM_DMA_XferErrorCallback(hdma); -#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ -} - -/** - * @} - */ - -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -/** - * @} - */ - -#endif /* FMC_Bank5_6 */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smbus.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smbus.c deleted file mode 100644 index 25c72fd..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smbus.c +++ /dev/null @@ -1,2784 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_smbus.c - * @author MCD Application Team - * @brief SMBUS HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the System Management Bus (SMBus) peripheral, - * based on SMBUS principals of operation : - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State, Mode and Error functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The SMBUS HAL driver can be used as follows: - - (#) Declare a SMBUS_HandleTypeDef handle structure, for example: - SMBUS_HandleTypeDef hsmbus; - - (#)Initialize the SMBUS low level resources by implementing the HAL_SMBUS_MspInit() API: - (##) Enable the SMBUSx interface clock - (##) SMBUS pins configuration - (+++) Enable the clock for the SMBUS GPIOs - (+++) Configure SMBUS pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the SMBUSx interrupt priority - (+++) Enable the NVIC SMBUS IRQ Channel - - (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, - Dual Addressing mode, Own Address2, General call and Nostretch mode in the hsmbus Init structure. - - (#) Initialize the SMBUS registers by calling the HAL_SMBUS_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_SMBUS_MspInit(&hsmbus) API. - - (#) To check if target device is ready for communication, use the function HAL_SMBUS_IsDeviceReady() - - (#) For SMBUS IO operations, only one mode of operations is available within this driver : - - - *** Interrupt mode IO operation *** - =================================== - - [..] - (+) Transmit in master/host SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Master_Transmit_IT() - (++) At transmission end of transfer HAL_SMBUS_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_MasterTxCpltCallback() - (+) Receive in master/host SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Master_Receive_IT() - (++) At reception end of transfer HAL_SMBUS_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_MasterRxCpltCallback() - (+) Abort a master/Host SMBUS process communication with Interrupt using HAL_SMBUS_Master_Abort_IT() - (++) End of abort process, HAL_SMBUS_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_AbortCpltCallback() - (+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode - using HAL_SMBUS_EnableListen_IT() HAL_SMBUS_DisableListen_IT() - (++) When address slave/device SMBUS match, HAL_SMBUS_AddrCallback() is executed and user can - add his own code to check the Address Match Code and the transmission direction request by master/host (Write/Read). - (++) At Listen mode end HAL_SMBUS_ListenCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_ListenCpltCallback() - (+) Transmit in slave/device SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Slave_Transmit_IT() - (++) At transmission end of transfer HAL_SMBUS_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_SlaveTxCpltCallback() - (+) Receive in slave/device SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Slave_Receive_IT() - (++) At reception end of transfer HAL_SMBUS_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_SlaveRxCpltCallback() - (+) Enable/Disable the SMBUS alert mode using HAL_SMBUS_EnableAlert_IT() and HAL_SMBUS_DisableAlert_IT() - (++) When SMBUS Alert is generated HAL_SMBUS_ErrorCallback() is executed and user can - add his own code by customization of function pointer HAL_SMBUS_ErrorCallback() - to check the Alert Error Code using function HAL_SMBUS_GetError() - (+) Get HAL state machine or error values using HAL_SMBUS_GetState() or HAL_SMBUS_GetError() - (+) In case of transfer Error, HAL_SMBUS_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SMBUS_ErrorCallback() - to check the Error Code using function HAL_SMBUS_GetError() - - - *** SMBUS HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in SMBUS HAL driver. - - (+) __HAL_SMBUS_ENABLE : Enable the SMBUS peripheral - (+) __HAL_SMBUS_DISABLE : Disable the SMBUS peripheral - (+) __HAL_SMBUS_GET_FLAG : Checks whether the specified SMBUS flag is set or not - (+) __HAL_SMBUS_CLEAR_FLAG: Clear the specified SMBUS pending flag - (+) __HAL_SMBUS_ENABLE_IT : Enable the specified SMBUS interrupt - (+) __HAL_SMBUS_DISABLE_IT: Disable the specified SMBUS interrupt - - [..] - (@) You can refer to the SMBUS HAL driver header file for more useful macros - - *** Callback registration *** - ============================================= - [..] - The compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_SMBUS_RegisterCallback() or HAL_SMBUS_RegisterXXXCallback() - to register an interrupt callback. - - Function HAL_SMBUS_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - For specific callback AddrCallback use dedicated register callbacks : HAL_SMBUS_RegisterAddrCallback(). - [..] - Use function HAL_SMBUS_UnRegisterCallback to reset a callback to the default - weak function. - HAL_SMBUS_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - [..] - For callback AddrCallback use dedicated register callbacks : HAL_SMBUS_UnRegisterAddrCallback(). - [..] - By default, after the HAL_SMBUS_Init() and when the state is HAL_SMBUS_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_SMBUS_MasterTxCpltCallback(), HAL_SMBUS_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - Callbacks can be registered/unregistered in HAL_SMBUS_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_SMBUS_STATE_READY or HAL_SMBUS_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_SMBUS_RegisterCallback() before calling HAL_SMBUS_DeInit() - or HAL_SMBUS_Init() function. - [..] - When the compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SMBUS SMBUS - * @brief SMBUS HAL module driver - * @{ - */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup SMBUS_Private_Define - * @{ - */ -#define SMBUS_TIMEOUT_FLAG 35U /*!< Timeout 35 ms */ -#define SMBUS_TIMEOUT_BUSY_FLAG 25U /*!< Timeout 25 ms */ -#define SMBUS_NO_OPTION_FRAME 0xFFFF0000U /*!< XferOptions default value */ - -#define SMBUS_SENDPEC_MODE I2C_CR1_PEC -#define SMBUS_GET_PEC(__HANDLE__) (((__HANDLE__)->Instance->SR2 & I2C_SR2_PEC) >> 8) - -/* Private define for @ref PreviousState usage */ -#define SMBUS_STATE_MSK ((uint32_t)((HAL_SMBUS_STATE_BUSY_TX | HAL_SMBUS_STATE_BUSY_RX) & (~(uint32_t)HAL_SMBUS_STATE_READY))) /*!< Mask State define, keep only RX and TX bits */ -#define SMBUS_STATE_NONE ((uint32_t)(HAL_SMBUS_MODE_NONE)) /*!< Default Value */ -#define SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_SMBUS_STATE_BUSY_TX & SMBUS_STATE_MSK) | HAL_SMBUS_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ -#define SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_SMBUS_STATE_BUSY_RX & SMBUS_STATE_MSK) | HAL_SMBUS_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ -#define SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_SMBUS_STATE_BUSY_TX & SMBUS_STATE_MSK) | HAL_SMBUS_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ -#define SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_SMBUS_STATE_BUSY_RX & SMBUS_STATE_MSK) | HAL_SMBUS_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/** @addtogroup SMBUS_Private_Functions - * @{ - */ - -static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); -static void SMBUS_ITError(SMBUS_HandleTypeDef *hsmbus); - -/* Private functions for SMBUS transfer IRQ handler */ -static HAL_StatusTypeDef SMBUS_MasterTransmit_TXE(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_MasterTransmit_BTF(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_MasterReceive_RXNE(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_MasterReceive_BTF(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_Master_SB(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_Master_ADD10(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_Master_ADDR(SMBUS_HandleTypeDef *hsmbus); - -static HAL_StatusTypeDef SMBUS_SlaveTransmit_TXE(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_SlaveTransmit_BTF(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_SlaveReceive_RXNE(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_SlaveReceive_BTF(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_Slave_ADDR(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_Slave_STOPF(SMBUS_HandleTypeDef *hsmbus); -static HAL_StatusTypeDef SMBUS_Slave_AF(SMBUS_HandleTypeDef *hsmbus); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SMBUS_Exported_Functions SMBUS Exported Functions - * @{ - */ - -/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the SMBUSx peripheral: - - (+) User must Implement HAL_SMBUS_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, IT and NVIC). - - (+) Call the function HAL_SMBUS_Init() to configure the selected device with - the selected configuration: - (++) Communication Speed - (++) Addressing mode - (++) Own Address 1 - (++) Dual Addressing mode - (++) Own Address 2 - (++) General call mode - (++) Nostretch mode - (++) Packet Error Check mode - (++) Peripheral mode - - (+) Call the function HAL_SMBUS_DeInit() to restore the default configuration - of the selected SMBUSx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the SMBUS according to the specified parameters - * in the SMBUS_InitTypeDef and initialize the associated handle. - * @param hsmbus pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus) -{ - uint32_t freqrange = 0U; - uint32_t pclk1 = 0U; - - /* Check the SMBUS handle allocation */ - if (hsmbus == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); -#if defined(I2C_FLTR_ANOFF) - assert_param(IS_SMBUS_ANALOG_FILTER(hsmbus->Init.AnalogFilter)); -#endif - assert_param(IS_SMBUS_CLOCK_SPEED(hsmbus->Init.ClockSpeed)); - assert_param(IS_SMBUS_OWN_ADDRESS1(hsmbus->Init.OwnAddress1)); - assert_param(IS_SMBUS_ADDRESSING_MODE(hsmbus->Init.AddressingMode)); - assert_param(IS_SMBUS_DUAL_ADDRESS(hsmbus->Init.DualAddressMode)); - assert_param(IS_SMBUS_OWN_ADDRESS2(hsmbus->Init.OwnAddress2)); - assert_param(IS_SMBUS_GENERAL_CALL(hsmbus->Init.GeneralCallMode)); - assert_param(IS_SMBUS_NO_STRETCH(hsmbus->Init.NoStretchMode)); - assert_param(IS_SMBUS_PEC(hsmbus->Init.PacketErrorCheckMode)); - assert_param(IS_SMBUS_PERIPHERAL_MODE(hsmbus->Init.PeripheralMode)); - - if (hsmbus->State == HAL_SMBUS_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hsmbus->Lock = HAL_UNLOCKED; - /* Init the low level hardware : GPIO, CLOCK, NVIC */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - /* Init the SMBUS Callback settings */ - hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ - hsmbus->AbortCpltCallback = HAL_SMBUS_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ - - if (hsmbus->MspInitCallback == NULL) - { - hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - hsmbus->MspInitCallback(hsmbus); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_SMBUS_MspInit(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - - hsmbus->State = HAL_SMBUS_STATE_BUSY; - - /* Disable the selected SMBUS peripheral */ - __HAL_SMBUS_DISABLE(hsmbus); - - /* Get PCLK1 frequency */ - pclk1 = HAL_RCC_GetPCLK1Freq(); - - /* Calculate frequency range */ - freqrange = SMBUS_FREQRANGE(pclk1); - - /*---------------------------- SMBUSx CR2 Configuration ----------------------*/ - /* Configure SMBUSx: Frequency range */ - MODIFY_REG(hsmbus->Instance->CR2, I2C_CR2_FREQ, freqrange); - - /*---------------------------- SMBUSx TRISE Configuration --------------------*/ - /* Configure SMBUSx: Rise Time */ - MODIFY_REG(hsmbus->Instance->TRISE, I2C_TRISE_TRISE, SMBUS_RISE_TIME(freqrange)); - - /*---------------------------- SMBUSx CCR Configuration ----------------------*/ - /* Configure SMBUSx: Speed */ - MODIFY_REG(hsmbus->Instance->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), SMBUS_SPEED_STANDARD(pclk1, hsmbus->Init.ClockSpeed)); - - /*---------------------------- SMBUSx CR1 Configuration ----------------------*/ - /* Configure SMBUSx: Generalcall , PEC , Peripheral mode and NoStretch mode */ - MODIFY_REG(hsmbus->Instance->CR1, (I2C_CR1_NOSTRETCH | I2C_CR1_ENGC | I2C_CR1_ENPEC | I2C_CR1_ENARP | I2C_CR1_SMBTYPE | I2C_CR1_SMBUS), (hsmbus->Init.NoStretchMode | hsmbus->Init.GeneralCallMode | hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode)); - - /*---------------------------- SMBUSx OAR1 Configuration ---------------------*/ - /* Configure SMBUSx: Own Address1 and addressing mode */ - MODIFY_REG(hsmbus->Instance->OAR1, (I2C_OAR1_ADDMODE | I2C_OAR1_ADD8_9 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD0), (hsmbus->Init.AddressingMode | hsmbus->Init.OwnAddress1)); - - /*---------------------------- SMBUSx OAR2 Configuration ---------------------*/ - /* Configure SMBUSx: Dual mode and Own Address2 */ - MODIFY_REG(hsmbus->Instance->OAR2, (I2C_OAR2_ENDUAL | I2C_OAR2_ADD2), (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2)); -#if defined(I2C_FLTR_ANOFF) - /*---------------------------- SMBUSx FLTR Configuration ------------------------*/ - /* Configure SMBUSx: Analog noise filter */ - SET_BIT(hsmbus->Instance->FLTR, hsmbus->Init.AnalogFilter); -#endif - - /* Enable the selected SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - hsmbus->XferPEC = 0x00; - - return HAL_OK; -} - -/** - * @brief DeInitializes the SMBUS peripheral. - * @param hsmbus pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus) -{ - /* Check the SMBUS handle allocation */ - if (hsmbus == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); - - hsmbus->State = HAL_SMBUS_STATE_BUSY; - - /* Disable the SMBUS Peripheral Clock */ - __HAL_SMBUS_DISABLE(hsmbus); - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - if (hsmbus->MspDeInitCallback == NULL) - { - hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hsmbus->MspDeInitCallback(hsmbus); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_SMBUS_MspDeInit(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->State = HAL_SMBUS_STATE_RESET; - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hsmbus); - - return HAL_OK; -} - -/** - * @brief Initialize the SMBUS MSP. - * @param hsmbus pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS - * @retval None - */ -__weak void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SMBUS_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the SMBUS MSP. - * @param hsmbus pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS - * @retval None - */ -__weak void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SMBUS_MspDeInit could be implemented in the user file - */ -} - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/** - * @brief Configures SMBUS Analog noise filter. - * @param hsmbus pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUSx peripheral. - * @param AnalogFilter new state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); - assert_param(IS_SMBUS_ANALOG_FILTER(AnalogFilter)); - - if (hsmbus->State == HAL_SMBUS_STATE_READY) - { - hsmbus->State = HAL_SMBUS_STATE_BUSY; - - /* Disable the selected SMBUS peripheral */ - __HAL_SMBUS_DISABLE(hsmbus); - - /* Reset SMBUSx ANOFF bit */ - hsmbus->Instance->FLTR &= ~(I2C_FLTR_ANOFF); - - /* Disable the analog filter */ - hsmbus->Instance->FLTR |= AnalogFilter; - - __HAL_SMBUS_ENABLE(hsmbus); - - hsmbus->State = HAL_SMBUS_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configures SMBUS Digital noise filter. - * @param hsmbus pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUSx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); - assert_param(IS_SMBUS_DIGITAL_FILTER(DigitalFilter)); - - if (hsmbus->State == HAL_SMBUS_STATE_READY) - { - hsmbus->State = HAL_SMBUS_STATE_BUSY; - - /* Disable the selected SMBUS peripheral */ - __HAL_SMBUS_DISABLE(hsmbus); - - /* Get the old register value */ - tmpreg = hsmbus->Instance->FLTR; - - /* Reset SMBUSx DNF bit [3:0] */ - tmpreg &= ~(I2C_FLTR_DNF); - - /* Set SMBUSx DNF coefficient */ - tmpreg |= DigitalFilter; - - /* Store the new register value */ - hsmbus->Instance->FLTR = tmpreg; - - __HAL_SMBUS_ENABLE(hsmbus); - - hsmbus->State = HAL_SMBUS_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -#endif -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User SMBUS Callback - * To be used instead of the weak predefined callback - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID - * @arg @ref HAL_SMBUS_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hsmbus); - - if (HAL_SMBUS_STATE_READY == hsmbus->State) - { - switch (CallbackID) - { - case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : - hsmbus->MasterTxCpltCallback = pCallback; - break; - - case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : - hsmbus->MasterRxCpltCallback = pCallback; - break; - - case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : - hsmbus->SlaveTxCpltCallback = pCallback; - break; - - case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : - hsmbus->SlaveRxCpltCallback = pCallback; - break; - - case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : - hsmbus->ListenCpltCallback = pCallback; - break; - - case HAL_SMBUS_ERROR_CB_ID : - hsmbus->ErrorCallback = pCallback; - break; - - case HAL_SMBUS_ABORT_CB_ID : - hsmbus->AbortCpltCallback = pCallback; - break; - - case HAL_SMBUS_MSPINIT_CB_ID : - hsmbus->MspInitCallback = pCallback; - break; - - case HAL_SMBUS_MSPDEINIT_CB_ID : - hsmbus->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SMBUS_STATE_RESET == hsmbus->State) - { - switch (CallbackID) - { - case HAL_SMBUS_MSPINIT_CB_ID : - hsmbus->MspInitCallback = pCallback; - break; - - case HAL_SMBUS_MSPDEINIT_CB_ID : - hsmbus->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsmbus); - return status; -} - -/** - * @brief Unregister an SMBUS Callback - * SMBUS callback is redirected to the weak predefined callback - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID - * @arg @ref HAL_SMBUS_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hsmbus); - - if (HAL_SMBUS_STATE_READY == hsmbus->State) - { - switch (CallbackID) - { - case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : - hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : - hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : - hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : - hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : - hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_SMBUS_ERROR_CB_ID : - hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_SMBUS_ABORT_CB_ID : - hsmbus->AbortCpltCallback = HAL_SMBUS_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_SMBUS_MSPINIT_CB_ID : - hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SMBUS_MSPDEINIT_CB_ID : - hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SMBUS_STATE_RESET == hsmbus->State) - { - switch (CallbackID) - { - case HAL_SMBUS_MSPINIT_CB_ID : - hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SMBUS_MSPDEINIT_CB_ID : - hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsmbus); - return status; -} - -/** - * @brief Register the Slave Address Match SMBUS Callback - * To be used instead of the weak HAL_SMBUS_AddrCallback() predefined callback - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hsmbus); - - if (HAL_SMBUS_STATE_READY == hsmbus->State) - { - hsmbus->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsmbus); - return status; -} - -/** - * @brief UnRegister the Slave Address Match SMBUS Callback - * Info Ready SMBUS Callback is redirected to the weak HAL_SMBUS_AddrCallback() predefined callback - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hsmbus); - - if (HAL_SMBUS_STATE_READY == hsmbus->State) - { - hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsmbus); - return status; -} - -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the SMBUS data - transfers. - - (#) Blocking mode function to check if device is ready for usage is : - (++) HAL_SMBUS_IsDeviceReady() - - (#) There is only one mode of transfer: - (++) Non Blocking mode : The communication is performed using Interrupts. - These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated SMBUS IRQ when using Interrupt mode. - - (#) Non Blocking mode functions with Interrupt are : - (++) HAL_SMBUS_Master_Transmit_IT() - (++) HAL_SMBUS_Master_Receive_IT() - (++) HAL_SMBUS_Master_Abort_IT() - (++) HAL_SMBUS_Slave_Transmit_IT() - (++) HAL_SMBUS_Slave_Receive_IT() - (++) HAL_SMBUS_EnableAlert_IT() - (++) HAL_SMBUS_DisableAlert_IT() - - (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode: - (++) HAL_SMBUS_MasterTxCpltCallback() - (++) HAL_SMBUS_MasterRxCpltCallback() - (++) HAL_SMBUS_SlaveTxCpltCallback() - (++) HAL_SMBUS_SlaveRxCpltCallback() - (++) HAL_SMBUS_AddrCallback() - (++) HAL_SMBUS_ListenCpltCallback() - (++) HAL_SMBUS_ErrorCallback() - (++) HAL_SMBUS_AbortCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param DevAddress Target device address The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t count = 0x00U; - - /* Check the parameters */ - assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hsmbus->State == HAL_SMBUS_STATE_READY) - { - /* Check Busy Flag only if FIRST call of Master interface */ - if ((XferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (XferOptions == SMBUS_FIRST_FRAME)) - { - /* Wait until BUSY flag is reset */ - count = SMBUS_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - if (count-- == 0U) - { - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - return HAL_TIMEOUT; - } - } - while (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET); - } - - /* Process Locked */ - __HAL_LOCK(hsmbus); - - /* Check if the SMBUS is already enabled */ - if ((hsmbus->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - } - - /* Disable Pos */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - hsmbus->State = HAL_SMBUS_STATE_BUSY_TX; - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_MASTER; - - /* Prepare transfer parameters */ - hsmbus->pBuffPtr = pData; - hsmbus->XferCount = Size; - hsmbus->XferOptions = XferOptions; - hsmbus->XferSize = hsmbus->XferCount; - hsmbus->Devaddress = DevAddress; - - /* Generate Start */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_START); - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - /* Note : The SMBUS interrupts must be enabled after unlocking current process - to avoid the risk of hsmbus interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_ENABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Receive in master/host SMBUS mode an amount of data in non blocking mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param DevAddress Target device address The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - __IO uint32_t count = 0U; - - /* Check the parameters */ - assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hsmbus->State == HAL_SMBUS_STATE_READY) - { - /* Check Busy Flag only if FIRST call of Master interface */ - if ((XferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (XferOptions == SMBUS_FIRST_FRAME)) - { - /* Wait until BUSY flag is reset */ - count = SMBUS_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - if (count-- == 0U) - { - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - return HAL_TIMEOUT; - } - } - while (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET); - } - - /* Process Locked */ - __HAL_LOCK(hsmbus); - - /* Check if the SMBUS is already enabled */ - if ((hsmbus->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - } - - /* Disable Pos */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - hsmbus->State = HAL_SMBUS_STATE_BUSY_RX; - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_MASTER; - - /* Prepare transfer parameters */ - hsmbus->pBuffPtr = pData; - hsmbus->XferCount = Size; - hsmbus->XferOptions = XferOptions; - hsmbus->XferSize = hsmbus->XferCount; - hsmbus->Devaddress = DevAddress; - - if ((hsmbus->PreviousState == SMBUS_STATE_MASTER_BUSY_TX) || (hsmbus->PreviousState == SMBUS_STATE_NONE)) - { - /* Generate Start condition if first transfer */ - if ((XferOptions == SMBUS_NEXT_FRAME) || (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (XferOptions == SMBUS_FIRST_FRAME) || (XferOptions == SMBUS_NO_OPTION_FRAME)) - { - /* Enable Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_START); - } - - if ((XferOptions == SMBUS_LAST_FRAME_NO_PEC) || (XferOptions == SMBUS_LAST_FRAME_WITH_PEC)) - { - if (hsmbus->PreviousState == SMBUS_STATE_NONE) - { - /* Enable Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - } - - if (hsmbus->PreviousState == SMBUS_STATE_MASTER_BUSY_TX) - { - /* Enable Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_START); - } - } - } - - - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - /* Note : The SMBUS interrupts must be enabled after unlocking current process - to avoid the risk of SMBUS interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_ENABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master/host SMBUS process communication with Interrupt. - * @note This abort can be called only if state is ready - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param DevAddress Target device address The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(DevAddress); - if (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) - { - /* Process Locked */ - __HAL_LOCK(hsmbus); - - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->State = HAL_SMBUS_STATE_ABORT; - - - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - - hsmbus->XferCount = 0U; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - SMBUS_ITError(hsmbus); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - - -/** - * @brief Transmit in slave/device SMBUS mode an amount of data in non blocking mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmbus); - - /* Check if the SMBUS is already enabled */ - if ((hsmbus->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - } - - /* Disable Pos */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - hsmbus->State = HAL_SMBUS_STATE_BUSY_TX_LISTEN; - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_SLAVE; - - /* Prepare transfer parameters */ - hsmbus->pBuffPtr = pData; - hsmbus->XferCount = Size; - hsmbus->XferOptions = XferOptions; - hsmbus->XferSize = hsmbus->XferCount; - - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the HOST */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - /* Note : The SMBUS interrupts must be enabled after unlocking current process - to avoid the risk of SMBUS interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_ENABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmbus); - - /* Check if the SMBUS is already enabled */ - if ((hsmbus->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - } - - /* Disable Pos */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - hsmbus->State = HAL_SMBUS_STATE_BUSY_RX_LISTEN; - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_SLAVE; - - - - /* Prepare transfer parameters */ - hsmbus->pBuffPtr = pData; - hsmbus->XferCount = Size; - hsmbus->XferOptions = XferOptions; - hsmbus->XferSize = hsmbus->XferCount; - - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - /* Note : The SMBUS interrupts must be enabled after unlocking current process - to avoid the risk of SMBUS interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_ENABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus) -{ - if (hsmbus->State == HAL_SMBUS_STATE_READY) - { - hsmbus->State = HAL_SMBUS_STATE_LISTEN; - - /* Check if the SMBUS is already enabled */ - if ((hsmbus->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - } - - /* Enable Address Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Enable EVT and ERR interrupt */ - __HAL_SMBUS_ENABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp; - - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) - { - tmp = (uint32_t)(hsmbus->State) & SMBUS_STATE_MSK; - hsmbus->PreviousState = tmp | (uint32_t)(hsmbus->Mode); - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - - /* Disable Address Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Disable EVT and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the SMBUS alert mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUSx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus) -{ - /* Enable SMBus alert */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ALERT); - - /* Clear ALERT flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_SMBALERT); - - /* Enable Alert Interrupt */ - __HAL_SMBUS_ENABLE_IT(hsmbus, SMBUS_IT_ERR); - - return HAL_OK; -} -/** - * @brief Disable the SMBUS alert mode with Interrupt. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUSx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus) -{ - /* Disable SMBus alert */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ALERT); - - /* Disable Alert Interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_ERR); - - return HAL_OK; -} - - -/** - * @brief Check if target device is ready for communication. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param DevAddress Target device address The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) -{ - uint32_t tickstart = 0U, tmp1 = 0U, tmp2 = 0U, tmp3 = 0U, SMBUS_Trials = 1U; - - /* Get tick */ - tickstart = HAL_GetTick(); - - if (hsmbus->State == HAL_SMBUS_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_BUSY, SET, SMBUS_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hsmbus); - - /* Check if the SMBUS is already enabled */ - if ((hsmbus->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable SMBUS peripheral */ - __HAL_SMBUS_ENABLE(hsmbus); - } - - /* Disable Pos */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - hsmbus->State = HAL_SMBUS_STATE_BUSY; - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - hsmbus->XferOptions = SMBUS_NO_OPTION_FRAME; - - do - { - /* Generate Start */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_START); - - /* Wait until SB flag is set */ - if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_SB, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send slave address */ - hsmbus->Instance->DR = SMBUS_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR or AF flag are set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_ADDR); - tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); - tmp3 = hsmbus->State; - while ((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_SMBUS_STATE_TIMEOUT)) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hsmbus->State = HAL_SMBUS_STATE_TIMEOUT; - } - tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_ADDR); - tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); - tmp3 = hsmbus->State; - } - - hsmbus->State = HAL_SMBUS_STATE_READY; - - /* Check if the ADDR flag has been set */ - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_ADDR) == SET) - { - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - - /* Clear ADDR Flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - - /* Wait until BUSY flag is reset */ - if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_BUSY, SET, SMBUS_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - - hsmbus->State = HAL_SMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - return HAL_OK; - } - else - { - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - - /* Clear AF Flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); - - /* Wait until BUSY flag is reset */ - if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_BUSY, SET, SMBUS_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - } - } - while (SMBUS_Trials++ < Trials); - - hsmbus->State = HAL_SMBUS_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief This function handles SMBUS event interrupt request. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus) -{ - uint32_t sr2itflags = READ_REG(hsmbus->Instance->SR2); - uint32_t sr1itflags = READ_REG(hsmbus->Instance->SR1); - uint32_t itsources = READ_REG(hsmbus->Instance->CR2); - - uint32_t CurrentMode = hsmbus->Mode; - - /* Master mode selected */ - if (CurrentMode == HAL_SMBUS_MODE_MASTER) - { - /* SB Set ----------------------------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_SB) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_Master_SB(hsmbus); - } - /* ADD10 Set -------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_ADD10) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_Master_ADD10(hsmbus); - } - /* ADDR Set --------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_ADDR) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_Master_ADDR(hsmbus); - } - /* SMBUS in mode Transmitter -----------------------------------------------*/ - if ((sr2itflags & SMBUS_FLAG_TRA) != RESET) - { - /* TXE set and BTF reset -----------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_TXE) != RESET) && ((itsources & SMBUS_IT_BUF) != RESET) && ((sr1itflags & SMBUS_FLAG_BTF) == RESET)) - { - SMBUS_MasterTransmit_TXE(hsmbus); - } - /* BTF set -------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_BTF) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_MasterTransmit_BTF(hsmbus); - } - } - /* SMBUS in mode Receiver --------------------------------------------------*/ - else - { - /* RXNE set and BTF reset -----------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_RXNE) != RESET) && ((itsources & SMBUS_IT_BUF) != RESET) && ((sr1itflags & SMBUS_FLAG_BTF) == RESET)) - { - SMBUS_MasterReceive_RXNE(hsmbus); - } - /* BTF set -------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_BTF) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_MasterReceive_BTF(hsmbus); - } - } - } - /* Slave mode selected */ - else - { - /* ADDR set --------------------------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_ADDR) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_Slave_ADDR(hsmbus); - } - /* STOPF set --------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_STOPF) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_Slave_STOPF(hsmbus); - } - /* SMBUS in mode Transmitter -----------------------------------------------*/ - else if ((sr2itflags & SMBUS_FLAG_TRA) != RESET) - { - /* TXE set and BTF reset -----------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_TXE) != RESET) && ((itsources & SMBUS_IT_BUF) != RESET) && ((sr1itflags & SMBUS_FLAG_BTF) == RESET)) - { - SMBUS_SlaveTransmit_TXE(hsmbus); - } - /* BTF set -------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_BTF) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_SlaveTransmit_BTF(hsmbus); - } - } - /* SMBUS in mode Receiver --------------------------------------------------*/ - else - { - /* RXNE set and BTF reset ----------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_RXNE) != RESET) && ((itsources & SMBUS_IT_BUF) != RESET) && ((sr1itflags & SMBUS_FLAG_BTF) == RESET)) - { - SMBUS_SlaveReceive_RXNE(hsmbus); - } - /* BTF set -------------------------------------------------------------*/ - else if (((sr1itflags & SMBUS_FLAG_BTF) != RESET) && ((itsources & SMBUS_IT_EVT) != RESET)) - { - SMBUS_SlaveReceive_BTF(hsmbus); - } - } - } -} - -/** - * @brief This function handles SMBUS error interrupt request. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus) -{ - uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U, tmp4 = 0U; - uint32_t sr1itflags = READ_REG(hsmbus->Instance->SR1); - uint32_t itsources = READ_REG(hsmbus->Instance->CR2); - - /* SMBUS Bus error interrupt occurred ------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_BERR) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_BERR); - - } - - /* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_OVR) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_OVR); - } - - /* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_ARLO) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ARLO); - } - - /* SMBUS Acknowledge failure error interrupt occurred ------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_AF) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - tmp1 = hsmbus->Mode; - tmp2 = hsmbus->XferCount; - tmp3 = hsmbus->State; - tmp4 = hsmbus->PreviousState; - - if ((tmp1 == HAL_SMBUS_MODE_SLAVE) && (tmp2 == 0U) && \ - ((tmp3 == HAL_SMBUS_STATE_BUSY_TX) || (tmp3 == HAL_SMBUS_STATE_BUSY_TX_LISTEN) || \ - ((tmp3 == HAL_SMBUS_STATE_LISTEN) && (tmp4 == SMBUS_STATE_SLAVE_BUSY_TX)))) - { - SMBUS_Slave_AF(hsmbus); - } - else - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_AF; - - /* Do not generate a STOP in case of Slave receive non acknowledge during transfer (mean not at the end of transfer) */ - if (hsmbus->Mode == HAL_SMBUS_MODE_MASTER) - { - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - - } - - /* Clear AF flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); - } - } - - /* SMBUS Timeout error interrupt occurred ---------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_TIMEOUT) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_TIMEOUT; - - /* Clear TIMEOUT flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT); - - } - - /* SMBUS Alert error interrupt occurred -----------------------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_SMBALERT) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT; - - /* Clear ALERT flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_SMBALERT); - } - - /* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/ - if (((sr1itflags & SMBUS_FLAG_PECERR) != RESET) && ((itsources & SMBUS_IT_ERR) != RESET)) - { - hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR; - - /* Clear PEC error flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR); - } - - /* Call the Error Callback in case of Error detected -----------------------*/ - if (hsmbus->ErrorCode != HAL_SMBUS_ERROR_NONE) - { - SMBUS_ITError(hsmbus); - } -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_MasterTxCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_MasterRxCpltCallback can be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_SlaveTxCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_SlaveRxCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref SMBUS_XferOptions_definition - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_AddrCallback can be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_ListenCpltCallback can be implemented in the user file - */ -} - -/** - * @brief SMBUS error callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_ErrorCallback can be implemented in the user file - */ -} - -/** - * @brief SMBUS abort callback. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval None - */ -__weak void HAL_SMBUS_AbortCpltCallback(SMBUS_HandleTypeDef *hsmbus) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmbus); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMBUS_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @brief Peripheral State and Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral State, Mode and Error functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the SMBUS handle state. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval HAL state - */ -HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus) -{ - /* Return SMBUS handle state */ - return hsmbus->State; -} - -/** - * @brief Return the SMBUS Master, Slave or no mode. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL mode - */ -HAL_SMBUS_ModeTypeDef HAL_SMBUS_GetMode(SMBUS_HandleTypeDef *hsmbus) -{ - return hsmbus->Mode; -} - -/** - * @brief Return the SMBUS error code - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for the specified SMBUS. - * @retval SMBUS Error Code - */ -uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus) -{ - return hsmbus->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup SMBUS_Private_Functions - * @{ - */ - -/** - * @brief Handle TXE flag for Master - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_MasterTransmit_TXE(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentState = hsmbus->State; - uint32_t CurrentXferOptions = hsmbus->XferOptions; - - if ((hsmbus->XferSize == 0U) && (CurrentState == HAL_SMBUS_STATE_BUSY_TX)) - { - /* Call TxCpltCallback() directly if no stop mode is set */ - if (((CurrentXferOptions == SMBUS_FIRST_FRAME) || (CurrentXferOptions == SMBUS_NEXT_FRAME)) && (CurrentXferOptions != SMBUS_NO_OPTION_FRAME)) - { - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - hsmbus->PreviousState = SMBUS_STATE_MASTER_BUSY_TX; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->MasterTxCpltCallback(hsmbus); -#else - HAL_SMBUS_MasterTxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - else /* Generate Stop condition then Call TxCpltCallback() */ - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - - hsmbus->PreviousState = HAL_SMBUS_STATE_READY; - hsmbus->State = HAL_SMBUS_STATE_READY; - - hsmbus->Mode = HAL_SMBUS_MODE_NONE; -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->MasterTxCpltCallback(hsmbus); -#else - HAL_SMBUS_MasterTxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - } - else if (CurrentState == HAL_SMBUS_STATE_BUSY_TX) - { - - if ((hsmbus->XferCount == 2U) && (SMBUS_GET_PEC_MODE(hsmbus) == SMBUS_PEC_ENABLE) && ((hsmbus->XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (hsmbus->XferOptions == SMBUS_LAST_FRAME_WITH_PEC))) - { - hsmbus->XferCount--; - } - - if (hsmbus->XferCount == 0U) - { - - /* Disable BUF interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_BUF); - - if ((SMBUS_GET_PEC_MODE(hsmbus) == SMBUS_PEC_ENABLE) && ((hsmbus->XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (hsmbus->XferOptions == SMBUS_LAST_FRAME_WITH_PEC))) - { - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_PEC); - } - - } - else - { - /* Write data to DR */ - hsmbus->Instance->DR = (*hsmbus->pBuffPtr++); - hsmbus->XferCount--; - } - } - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Master transmitter - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_MasterTransmit_BTF(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hsmbus->XferOptions; - - if (hsmbus->State == HAL_SMBUS_STATE_BUSY_TX) - { - if (hsmbus->XferCount != 0U) - { - /* Write data to DR */ - hsmbus->Instance->DR = (*hsmbus->pBuffPtr++); - hsmbus->XferCount--; - } - else - { - /* Call TxCpltCallback() directly if no stop mode is set */ - if (((CurrentXferOptions == SMBUS_FIRST_FRAME) || (CurrentXferOptions == SMBUS_NEXT_FRAME)) && (CurrentXferOptions != SMBUS_NO_OPTION_FRAME)) - { - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - hsmbus->PreviousState = SMBUS_STATE_MASTER_BUSY_TX; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->MasterTxCpltCallback(hsmbus); -#else - HAL_SMBUS_MasterTxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - else /* Generate Stop condition then Call TxCpltCallback() */ - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - - hsmbus->PreviousState = HAL_SMBUS_STATE_READY; - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->MasterTxCpltCallback(hsmbus); -#else - HAL_SMBUS_MasterTxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - } - } - return HAL_OK; -} - -/** - * @brief Handle RXNE flag for Master - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_MasterReceive_RXNE(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hsmbus->XferOptions; - - if (hsmbus->State == HAL_SMBUS_STATE_BUSY_RX) - { - uint32_t tmp = hsmbus->XferCount; - - if (tmp > 3U) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - - if (hsmbus->XferCount == 3) - { - /* Disable BUF interrupt, this help to treat correctly the last 4 bytes - on BTF subroutine */ - /* Disable BUF interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_BUF); - } - } - - else if (tmp == 2U) - { - - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - - if ((CurrentXferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (CurrentXferOptions == SMBUS_LAST_FRAME_WITH_PEC)) - { - /* PEC of slave */ - hsmbus->XferPEC = SMBUS_GET_PEC(hsmbus); - - } - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - } - - else if ((tmp == 1U) || (tmp == 0U)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->MasterRxCpltCallback(hsmbus); -#else - HAL_SMBUS_MasterRxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - } - - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Master receiver - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_MasterReceive_BTF(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hsmbus->XferOptions; - - if (hsmbus->XferCount == 4U) - { - /* Disable BUF interrupt, this help to treat correctly the last 2 bytes - on BTF subroutine if there is a reception delay between N-1 and N byte */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_BUF); - - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - hsmbus->XferPEC = SMBUS_GET_PEC(hsmbus); - } - else if (hsmbus->XferCount == 3U) - { - /* Disable BUF interrupt, this help to treat correctly the last 2 bytes - on BTF subroutine if there is a reception delay between N-1 and N byte */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_BUF); - - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - hsmbus->XferPEC = SMBUS_GET_PEC(hsmbus); - } - else if (hsmbus->XferCount == 2U) - { - /* Prepare next transfer or stop current transfer */ - if ((CurrentXferOptions == SMBUS_NEXT_FRAME) || (CurrentXferOptions == SMBUS_FIRST_FRAME)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Generate ReStart */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_START); - } - else - { - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - } - - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - - /* Disable EVT and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_ERR); - - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->MasterRxCpltCallback(hsmbus); -#else - HAL_SMBUS_MasterRxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - else - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - } - return HAL_OK; -} - -/** - * @brief Handle SB flag for Master - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_Master_SB(SMBUS_HandleTypeDef *hsmbus) -{ - if (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_7BIT) - { - /* Send slave 7 Bits address */ - if (hsmbus->State == HAL_SMBUS_STATE_BUSY_TX) - { - hsmbus->Instance->DR = SMBUS_7BIT_ADD_WRITE(hsmbus->Devaddress); - } - else - { - hsmbus->Instance->DR = SMBUS_7BIT_ADD_READ(hsmbus->Devaddress); - } - } - else - { - if (hsmbus->EventCount == 0U) - { - /* Send header of slave address */ - hsmbus->Instance->DR = SMBUS_10BIT_HEADER_WRITE(hsmbus->Devaddress); - } - else if (hsmbus->EventCount == 1U) - { - /* Send header of slave address */ - hsmbus->Instance->DR = SMBUS_10BIT_HEADER_READ(hsmbus->Devaddress); - } - } - return HAL_OK; -} - -/** - * @brief Handle ADD10 flag for Master - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_Master_ADD10(SMBUS_HandleTypeDef *hsmbus) -{ - /* Send slave address */ - hsmbus->Instance->DR = SMBUS_10BIT_ADDRESS(hsmbus->Devaddress); - - return HAL_OK; -} - -/** - * @brief Handle ADDR flag for Master - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_Master_ADDR(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - uint32_t Prev_State = hsmbus->PreviousState; - - if (hsmbus->State == HAL_SMBUS_STATE_BUSY_RX) - { - if ((hsmbus->EventCount == 0U) && (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_10BIT)) - { - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - - /* Generate Restart */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_START); - - hsmbus->EventCount++; - } - else - { - /* In the case of the Quick Command, the ADDR flag is cleared and a stop is generated */ - if (hsmbus->XferCount == 0U) - { - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - } - else if (hsmbus->XferCount == 1U) - { - /* Prepare next transfer or stop current transfer */ - if ((hsmbus->XferOptions == SMBUS_FIRST_FRAME) && (Prev_State != SMBUS_STATE_MASTER_BUSY_RX)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - } - else if ((hsmbus->XferOptions == SMBUS_NEXT_FRAME) && (Prev_State != SMBUS_STATE_MASTER_BUSY_RX)) - { - /* Enable Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - } - else - { - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - - /* Generate Stop */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_STOP); - } - } - else if (hsmbus->XferCount == 2U) - { - if (hsmbus->XferOptions != SMBUS_NEXT_FRAME) - { - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Enable Pos */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - - } - else - { - /* Enable Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - } - - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - } - else - { - /* Enable Acknowledge */ - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - } - - /* Reset Event counter */ - hsmbus->EventCount = 0U; - } - } - else - { - /* Clear ADDR flag */ - __HAL_SMBUS_CLEAR_ADDRFLAG(hsmbus); - } - - return HAL_OK; -} - -/** - * @brief Handle TXE flag for Slave - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_SlaveTransmit_TXE(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentState = hsmbus->State; - - if (hsmbus->XferCount != 0U) - { - /* Write data to DR */ - hsmbus->Instance->DR = (*hsmbus->pBuffPtr++); - hsmbus->XferCount--; - - if ((hsmbus->XferCount == 2U) && (SMBUS_GET_PEC_MODE(hsmbus) == SMBUS_PEC_ENABLE) && ((hsmbus->XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (hsmbus->XferOptions == SMBUS_LAST_FRAME_WITH_PEC))) - { - hsmbus->XferCount--; - } - - if ((hsmbus->XferCount == 0U) && (CurrentState == (HAL_SMBUS_STATE_BUSY_TX_LISTEN))) - { - /* Last Byte is received, disable Interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_BUF); - - /* Set state at HAL_SMBUS_STATE_LISTEN */ - hsmbus->PreviousState = SMBUS_STATE_SLAVE_BUSY_TX; - hsmbus->State = HAL_SMBUS_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->SlaveTxCpltCallback(hsmbus); -#else - HAL_SMBUS_SlaveTxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - } - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Slave transmitter - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_SlaveTransmit_BTF(SMBUS_HandleTypeDef *hsmbus) -{ - if (hsmbus->XferCount != 0U) - { - /* Write data to DR */ - hsmbus->Instance->DR = (*hsmbus->pBuffPtr++); - hsmbus->XferCount--; - } - - - - else if ((hsmbus->XferCount == 0U) && (SMBUS_GET_PEC_MODE(hsmbus) == SMBUS_PEC_ENABLE) && ((hsmbus->XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (hsmbus->XferOptions == SMBUS_LAST_FRAME_WITH_PEC))) - { - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_PEC); - } - return HAL_OK; -} - -/** - * @brief Handle RXNE flag for Slave - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_SlaveReceive_RXNE(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentState = hsmbus->State; - - if (hsmbus->XferCount != 0U) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - - if ((hsmbus->XferCount == 1U) && (SMBUS_GET_PEC_MODE(hsmbus) == SMBUS_PEC_ENABLE) && ((hsmbus->XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || (hsmbus->XferOptions == SMBUS_LAST_FRAME_WITH_PEC))) - { - SET_BIT(hsmbus->Instance->CR1, I2C_CR1_PEC); - hsmbus->XferPEC = SMBUS_GET_PEC(hsmbus); - } - if ((hsmbus->XferCount == 0U) && (CurrentState == HAL_SMBUS_STATE_BUSY_RX_LISTEN)) - { - /* Last Byte is received, disable Interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_BUF); - - /* Set state at HAL_SMBUS_STATE_LISTEN */ - hsmbus->PreviousState = SMBUS_STATE_SLAVE_BUSY_RX; - hsmbus->State = HAL_SMBUS_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->SlaveRxCpltCallback(hsmbus); -#else - HAL_SMBUS_SlaveRxCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - } - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Slave receiver - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_SlaveReceive_BTF(SMBUS_HandleTypeDef *hsmbus) -{ - if (hsmbus->XferCount != 0U) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - hsmbus->XferCount--; - } - - return HAL_OK; -} - -/** - * @brief Handle ADD flag for Slave - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_Slave_ADDR(SMBUS_HandleTypeDef *hsmbus) -{ - uint8_t TransferDirection = SMBUS_DIRECTION_RECEIVE ; - uint16_t SlaveAddrCode = 0U; - - /* Transfer Direction requested by Master */ - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TRA) == RESET) - { - TransferDirection = SMBUS_DIRECTION_TRANSMIT; - } - - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_DUALF) == RESET) - { - SlaveAddrCode = hsmbus->Init.OwnAddress1; - } - else - { - SlaveAddrCode = hsmbus->Init.OwnAddress2; - } - - /* Call Slave Addr callback */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); -#else - HAL_SMBUS_AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - - return HAL_OK; -} - -/** - * @brief Handle STOPF flag for Slave - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_Slave_STOPF(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - uint32_t CurrentState = hsmbus->State; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - /* Clear STOPF flag */ - __HAL_SMBUS_CLEAR_STOPFLAG(hsmbus); - - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - /* All data are not transferred, so set error code accordingly */ - if (hsmbus->XferCount != 0U) - { - /* Store Last receive data if any */ - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BTF) == SET) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - - if (hsmbus->XferCount > 0) - { - hsmbus->XferSize--; - hsmbus->XferCount--; - } - } - - /* Store Last receive data if any */ - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) == SET) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - - if (hsmbus->XferCount > 0) - { - hsmbus->XferSize--; - hsmbus->XferCount--; - } - } - } - - if (hsmbus->ErrorCode != HAL_SMBUS_ERROR_NONE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - SMBUS_ITError(hsmbus); - } - else - { - if ((CurrentState == HAL_SMBUS_STATE_LISTEN) || (CurrentState == HAL_SMBUS_STATE_BUSY_RX_LISTEN) || \ - (CurrentState == HAL_SMBUS_STATE_BUSY_TX_LISTEN)) - { - hsmbus->XferOptions = SMBUS_NO_OPTION_FRAME; - hsmbus->PreviousState = HAL_SMBUS_STATE_READY; - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->ListenCpltCallback(hsmbus); -#else - HAL_SMBUS_ListenCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - } - return HAL_OK; -} - -/** - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_Slave_AF(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentState = hsmbus->State; - uint32_t CurrentXferOptions = hsmbus->XferOptions; - - if (((CurrentXferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || (CurrentXferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ - (CurrentXferOptions == SMBUS_LAST_FRAME_NO_PEC) || (CurrentXferOptions == SMBUS_LAST_FRAME_WITH_PEC)) && \ - (CurrentState == HAL_SMBUS_STATE_LISTEN)) - { - hsmbus->XferOptions = SMBUS_NO_OPTION_FRAME; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_EVT | SMBUS_IT_BUF | SMBUS_IT_ERR); - - /* Clear AF flag */ - __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); - - /* Disable Acknowledge */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_ACK); - - hsmbus->PreviousState = HAL_SMBUS_STATE_READY; - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->ListenCpltCallback(hsmbus); -#else - HAL_SMBUS_ListenCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - return HAL_OK; -} - - - -/** - * @brief SMBUS interrupts error process - * @param hsmbus SMBUS handle. - * @retval None - */ -static void SMBUS_ITError(SMBUS_HandleTypeDef *hsmbus) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - uint32_t CurrentState = hsmbus->State; - - if ((CurrentState == HAL_SMBUS_STATE_BUSY_TX_LISTEN) || (CurrentState == HAL_SMBUS_STATE_BUSY_RX_LISTEN)) - { - /* keep HAL_SMBUS_STATE_LISTEN */ - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->State = HAL_SMBUS_STATE_LISTEN; - } - else - { - /* If state is an abort treatment on going, don't change state */ - /* This change will be done later */ - if (hsmbus->State != HAL_SMBUS_STATE_ABORT) - { - hsmbus->State = HAL_SMBUS_STATE_READY; - } - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - } - - /* Disable Pos bit in SMBUS CR1 when error occurred in Master/Mem Receive IT Process */ - CLEAR_BIT(hsmbus->Instance->CR1, I2C_CR1_POS); - - if (hsmbus->State == HAL_SMBUS_STATE_ABORT) - { - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; - - /* Store Last receive data if any */ - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) == SET) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - } - - /* Disable SMBUS peripheral to prevent dummy data in buffer */ - __HAL_SMBUS_DISABLE(hsmbus); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->AbortCpltCallback(hsmbus); -#else - HAL_SMBUS_AbortCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - else - { - /* Store Last receive data if any */ - if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) == SET) - { - /* Read data from DR */ - (*hsmbus->pBuffPtr++) = hsmbus->Instance->DR; - } - - /* Call user error callback */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->ErrorCallback(hsmbus); -#else - HAL_SMBUS_ErrorCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } - /* STOP Flag is not set after a NACK reception */ - /* So may inform upper layer that listen phase is stopped */ - /* during NACK error treatment */ - if ((hsmbus->State == HAL_SMBUS_STATE_LISTEN) && ((hsmbus->ErrorCode & HAL_SMBUS_ERROR_AF) == HAL_SMBUS_ERROR_AF)) - { - hsmbus->XferOptions = SMBUS_NO_OPTION_FRAME; - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) - hsmbus->ListenCpltCallback(hsmbus); -#else - HAL_SMBUS_ListenCpltCallback(hsmbus); -#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ - } -} - -/** - * @brief This function handles SMBUS Communication Timeout. - * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains - * the configuration information for SMBUS module - * @param Flag specifies the SMBUS flag to check. - * @param Status The new Flag status (SET or RESET). - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) -{ - /* Wait until flag is set */ - if (Status == RESET) - { - while (__HAL_SMBUS_GET_FLAG(hsmbus, Flag) == RESET) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout)) - { - hsmbus->PreviousState = SMBUS_STATE_NONE; - hsmbus->State = HAL_SMBUS_STATE_READY; - hsmbus->Mode = HAL_SMBUS_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmbus); - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @} - */ - - -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c deleted file mode 100644 index da7c302..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c +++ /dev/null @@ -1,1627 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spdifrx.c - * @author MCD Application Team - * @brief This file provides firmware functions to manage the following - * functionalities of the SPDIFRX audio interface: - * + Initialization and Configuration - * + Data transfers functions - * + DMA transfers management - * + Interrupts and flags management - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The SPDIFRX HAL driver can be used as follow: - - (#) Declare SPDIFRX_HandleTypeDef handle structure. - (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API: - (##) Enable the SPDIFRX interface clock. - (##) SPDIFRX pins configuration: - (+++) Enable the clock for the SPDIFRX GPIOs. - (+++) Configure these SPDIFRX pins as alternate function pull-up. - (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's). - (+++) Configure the SPDIFRX interrupt priority. - (+++) Enable the NVIC SPDIFRX IRQ handle. - (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's). - (+++) Declare a DMA handle structure for the reception of the Data Flow channel. - (+++) Declare a DMA handle structure for the reception of the Control Flow channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters. - (+++) Configure the DMA Channel. - (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the - DMA CtrlRx/DataRx channel. - - (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits - using HAL_SPDIFRX_Init() function. - - -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros - __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process. - -@- Make sure that ck_spdif clock is configured. - - (#) Three operation modes are available within this driver : - - *** Polling mode for reception operation (for debug purpose) *** - ================================================================ - [..] - (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow() - (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow() - - *** Interrupt mode for reception operation *** - ========================================= - [..] - (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT() - (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT() - (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback - (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback - (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback - - *** DMA mode for reception operation *** - ======================================== - [..] - (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA() - (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA() - (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback - (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback - (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback - (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop() - - *** SPDIFRX HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in SPDIFRX HAL driver. - (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State) - (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State) - (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State) - (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts - (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts - (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not. - - [..] - (@) You can refer to the SPDIFRX HAL driver header file for more useful macros - - *** Callback registration *** - ============================================= - - The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use HAL_SPDIFRX_RegisterCallback() function to register an interrupt callback. - - The HAL_SPDIFRX_RegisterCallback() function allows to register the following callbacks: - (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback. - (+) RxCpltCallback : SPDIFRX Data flow completed callback. - (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback. - (+) CxCpltCallback : SPDIFRX Control flow completed callback. - (+) ErrorCallback : SPDIFRX error callback. - (+) MspInitCallback : SPDIFRX MspInit. - (+) MspDeInitCallback : SPDIFRX MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - Use HAL_SPDIFRX_UnRegisterCallback() function to reset a callback to the default - weak function. - The HAL_SPDIFRX_UnRegisterCallback() function takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset the following callbacks: - (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback. - (+) RxCpltCallback : SPDIFRX Data flow completed callback. - (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback. - (+) CxCpltCallback : SPDIFRX Control flow completed callback. - (+) ErrorCallback : SPDIFRX error callback. - (+) MspInitCallback : SPDIFRX MspInit. - (+) MspDeInitCallback : SPDIFRX MspDeInit. - - By default, after the HAL_SPDIFRX_Init() and when the state is HAL_SPDIFRX_STATE_RESET - all callbacks are set to the corresponding weak functions : - HAL_SPDIFRX_RxHalfCpltCallback() , HAL_SPDIFRX_RxCpltCallback(), HAL_SPDIFRX_CxHalfCpltCallback(), - HAL_SPDIFRX_CxCpltCallback() and HAL_SPDIFRX_ErrorCallback() - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak function in the HAL_SPDIFRX_Init()/ HAL_SPDIFRX_DeInit() only when - these callbacks pointers are NULL (not registered beforehand). - If not, MspInit or MspDeInit callbacks pointers are not null, the HAL_SPDIFRX_Init() / HAL_SPDIFRX_DeInit() - keep and use the user MspInit/MspDeInit functions (registered beforehand) - - Callbacks can be registered/unregistered in HAL_SPDIFRX_STATE_READY state only. - Exception done MspInit/MspDeInit callbacks that can be registered/unregistered - in HAL_SPDIFRX_STATE_READY or HAL_SPDIFRX_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_SPDIFRX_RegisterCallback() before calling HAL_SPDIFRX_DeInit() - or HAL_SPDIFRX_Init() function. - - When The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SPDIFRX SPDIFRX - * @brief SPDIFRX HAL module driver - * @{ - */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED -#if defined (SPDIFRX) -#if defined(STM32F446xx) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define SPDIFRX_TIMEOUT_VALUE 0xFFFFU - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup SPDIFRX_Private_Functions - * @{ - */ -static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma); -static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma); -static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma); -static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma); -static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif); -static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif); -static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, - FlagStatus Status, uint32_t Timeout, uint32_t tickstart); -/** - * @} - */ -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions - * @{ - */ - -/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the SPDIFRX peripheral: - - (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with - the selected configuration: - (++) Input Selection (IN0, IN1,...) - (++) Maximum allowed re-tries during synchronization phase - (++) Wait for activity on SPDIF selected input - (++) Channel status selection (from channel A or B) - (++) Data format (LSB, MSB, ...) - (++) Stereo mode - (++) User bits masking (PT,C,U,V,...) - - (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration - of the selected SPDIFRXx peripheral. - @endverbatim - * @{ - */ - -/** - * @brief Initializes the SPDIFRX according to the specified parameters - * in the SPDIFRX_InitTypeDef and create the associated handle. - * @param hspdif SPDIFRX handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif) -{ - uint32_t tmpreg; - - /* Check the SPDIFRX handle allocation */ - if (hspdif == NULL) - { - return HAL_ERROR; - } - - /* Check the SPDIFRX parameters */ - assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode)); - assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection)); - assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries)); - assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity)); - assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection)); - assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat)); - assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask)); - assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask)); - assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask)); - assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask)); - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - if (hspdif->State == HAL_SPDIFRX_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hspdif->Lock = HAL_UNLOCKED; - - hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; /* Legacy weak RxCpltCallback */ - hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; /* Legacy weak CxHalfCpltCallback */ - hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; /* Legacy weak CxCpltCallback */ - hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hspdif->MspInitCallback == NULL) - { - hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware */ - hspdif->MspInitCallback(hspdif); - } -#else - if (hspdif->State == HAL_SPDIFRX_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hspdif->Lock = HAL_UNLOCKED; - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_SPDIFRX_MspInit(hspdif); - } -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - - /* SPDIFRX peripheral state is BUSY */ - hspdif->State = HAL_SPDIFRX_STATE_BUSY; - - /* Disable SPDIFRX interface (IDLE State) */ - __HAL_SPDIFRX_IDLE(hspdif); - - /* Reset the old SPDIFRX CR configuration */ - tmpreg = hspdif->Instance->CR; - - tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | - SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK | - SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA | - SPDIFRX_CR_INSEL); - - /* Sets the new configuration of the SPDIFRX peripheral */ - tmpreg |= (hspdif->Init.StereoMode | - hspdif->Init.InputSelection | - hspdif->Init.Retries | - hspdif->Init.WaitForActivity | - hspdif->Init.ChannelSelection | - hspdif->Init.DataFormat | - hspdif->Init.PreambleTypeMask | - hspdif->Init.ChannelStatusMask | - hspdif->Init.ValidityBitMask | - hspdif->Init.ParityErrorMask - ); - - - hspdif->Instance->CR = tmpreg; - - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; - - /* SPDIFRX peripheral state is READY*/ - hspdif->State = HAL_SPDIFRX_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the SPDIFRX peripheral - * @param hspdif SPDIFRX handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Check the SPDIFRX handle allocation */ - if (hspdif == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance)); - - hspdif->State = HAL_SPDIFRX_STATE_BUSY; - - /* Disable SPDIFRX interface (IDLE state) */ - __HAL_SPDIFRX_IDLE(hspdif); - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - if (hspdif->MspDeInitCallback == NULL) - { - hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hspdif->MspDeInitCallback(hspdif); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_SPDIFRX_MspDeInit(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; - - /* SPDIFRX peripheral state is RESET*/ - hspdif->State = HAL_SPDIFRX_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; -} - -/** - * @brief SPDIFRX MSP Init - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_MspInit could be implemented in the user file - */ -} - -/** - * @brief SPDIFRX MSP DeInit - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User SPDIFRX Callback - * To be used instead of the weak predefined callback - * @param hspdif SPDIFRX handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID - * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID - * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID - * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID - * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID - * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, - pSPDIFRX_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hspdif); - - if (HAL_SPDIFRX_STATE_READY == hspdif->State) - { - switch (CallbackID) - { - case HAL_SPDIFRX_RX_HALF_CB_ID : - hspdif->RxHalfCpltCallback = pCallback; - break; - - case HAL_SPDIFRX_RX_CPLT_CB_ID : - hspdif->RxCpltCallback = pCallback; - break; - - case HAL_SPDIFRX_CX_HALF_CB_ID : - hspdif->CxHalfCpltCallback = pCallback; - break; - - case HAL_SPDIFRX_CX_CPLT_CB_ID : - hspdif->CxCpltCallback = pCallback; - break; - - case HAL_SPDIFRX_ERROR_CB_ID : - hspdif->ErrorCallback = pCallback; - break; - - case HAL_SPDIFRX_MSPINIT_CB_ID : - hspdif->MspInitCallback = pCallback; - break; - - case HAL_SPDIFRX_MSPDEINIT_CB_ID : - hspdif->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SPDIFRX_STATE_RESET == hspdif->State) - { - switch (CallbackID) - { - case HAL_SPDIFRX_MSPINIT_CB_ID : - hspdif->MspInitCallback = pCallback; - break; - - case HAL_SPDIFRX_MSPDEINIT_CB_ID : - hspdif->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hspdif); - return status; -} - -/** - * @brief Unregister a SPDIFRX Callback - * SPDIFRX callback is redirected to the weak predefined callback - * @param hspdif SPDIFRX handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID - * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID - * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID - * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID - * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID - * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, - HAL_SPDIFRX_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hspdif); - - if (HAL_SPDIFRX_STATE_READY == hspdif->State) - { - switch (CallbackID) - { - case HAL_SPDIFRX_RX_HALF_CB_ID : - hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; - break; - - case HAL_SPDIFRX_RX_CPLT_CB_ID : - hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; - break; - - case HAL_SPDIFRX_CX_HALF_CB_ID : - hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; - break; - - case HAL_SPDIFRX_CX_CPLT_CB_ID : - hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; - break; - - case HAL_SPDIFRX_ERROR_CB_ID : - hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; - break; - - default : - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SPDIFRX_STATE_RESET == hspdif->State) - { - switch (CallbackID) - { - case HAL_SPDIFRX_MSPINIT_CB_ID : - hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SPDIFRX_MSPDEINIT_CB_ID : - hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspInit */ - break; - - default : - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hspdif); - return status; -} - -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - -/** - * @brief Set the SPDIFRX data format according to the specified parameters in the SPDIFRX_InitTypeDef. - * @param hspdif SPDIFRX handle - * @param sDataFormat SPDIFRX data format - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat) -{ - uint32_t tmpreg; - - /* Check the SPDIFRX handle allocation */ - if (hspdif == NULL) - { - return HAL_ERROR; - } - - /* Check the SPDIFRX parameters */ - assert_param(IS_STEREO_MODE(sDataFormat.StereoMode)); - assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat)); - assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask)); - assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask)); - assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask)); - assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask)); - - /* Reset the old SPDIFRX CR configuration */ - tmpreg = hspdif->Instance->CR; - - if (((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) && - (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) || - ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode))) - { - return HAL_ERROR; - } - - tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | - SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK); - - /* Configure the new data format */ - tmpreg |= (sDataFormat.StereoMode | - sDataFormat.DataFormat | - sDataFormat.PreambleTypeMask | - sDataFormat.ChannelStatusMask | - sDataFormat.ValidityBitMask | - sDataFormat.ParityErrorMask); - - hspdif->Instance->CR = tmpreg; - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim -=============================================================================== - ##### IO operation functions ##### -=============================================================================== - [..] - This subsection provides a set of functions allowing to manage the SPDIFRX data - transfers. - - (#) There is two mode of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer start-up. - The end of the data processing will be indicated through the - dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_SPDIFRX_ReceiveDataFlow() - (++) HAL_SPDIFRX_ReceiveControlFlow() - (+@) Do not use blocking mode to receive both control and data flow at the same time. - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_SPDIFRX_ReceiveControlFlow_IT() - (++) HAL_SPDIFRX_ReceiveDataFlow_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_SPDIFRX_ReceiveControlFlow_DMA() - (++) HAL_SPDIFRX_ReceiveDataFlow_DMA() - - (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode: - (++) HAL_SPDIFRX_RxCpltCallback() - (++) HAL_SPDIFRX_CxCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Receives an amount of data (Data Flow) in blocking mode. - * @param hspdif pointer to SPDIFRX_HandleTypeDef structure that contains - * the configuration information for SPDIFRX module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - uint16_t sizeCounter = Size; - uint32_t *pTmpBuf = pData; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - if (hspdif->State == HAL_SPDIFRX_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hspdif); - - hspdif->State = HAL_SPDIFRX_STATE_BUSY; - - /* Start synchronisation */ - __HAL_SPDIFRX_SYNC(hspdif); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until SYNCD flag is set */ - if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Start reception */ - __HAL_SPDIFRX_RCV(hspdif); - - /* Receive data flow */ - while (sizeCounter > 0U) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until RXNE flag is set */ - if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - - (*pTmpBuf) = hspdif->Instance->DR; - pTmpBuf++; - sizeCounter--; - } - - /* SPDIFRX ready */ - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives an amount of data (Control Flow) in blocking mode. - * @param hspdif pointer to a SPDIFRX_HandleTypeDef structure that contains - * the configuration information for SPDIFRX module. - * @param pData Pointer to data buffer - * @param Size Amount of data to be received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - uint16_t sizeCounter = Size; - uint32_t *pTmpBuf = pData; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - if (hspdif->State == HAL_SPDIFRX_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hspdif); - - hspdif->State = HAL_SPDIFRX_STATE_BUSY; - - /* Start synchronization */ - __HAL_SPDIFRX_SYNC(hspdif); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until SYNCD flag is set */ - if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Start reception */ - __HAL_SPDIFRX_RCV(hspdif); - - /* Receive control flow */ - while (sizeCounter > 0U) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until CSRNE flag is set */ - if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_TIMEOUT; - } - - (*pTmpBuf) = hspdif->Instance->CSR; - pTmpBuf++; - sizeCounter--; - } - - /* SPDIFRX ready */ - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt - * @param hspdif SPDIFRX handle - * @param pData a 32-bit pointer to the Receive data buffer. - * @param Size number of data sample to be received . - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) -{ - uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); - - const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; - - if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX)) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hspdif); - - hspdif->pRxBuffPtr = pData; - hspdif->RxXferSize = Size; - hspdif->RxXferCount = Size; - - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; - - /* Check if a receive process is ongoing or not */ - hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; - - /* Enable the SPDIFRX PE Error Interrupt */ - __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - - /* Enable the SPDIFRX OVR Error Interrupt */ - __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - - /* Enable the SPDIFRX RXNE interrupt */ - __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE); - - if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) - { - /* Start synchronization */ - __HAL_SPDIFRX_SYNC(hspdif); - - /* Wait until SYNCD flag is set */ - do - { - if (count == 0U) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_TIMEOUT; - } - count--; - } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); - - /* Start reception */ - __HAL_SPDIFRX_RCV(hspdif); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data (Control Flow) with Interrupt - * @param hspdif SPDIFRX handle - * @param pData a 32-bit pointer to the Receive data buffer. - * @param Size number of data sample (Control Flow) to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) -{ - uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); - - const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; - - if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX)) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hspdif); - - hspdif->pCsBuffPtr = pData; - hspdif->CsXferSize = Size; - hspdif->CsXferCount = Size; - - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; - - /* Check if a receive process is ongoing or not */ - hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; - - /* Enable the SPDIFRX PE Error Interrupt */ - __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - - /* Enable the SPDIFRX OVR Error Interrupt */ - __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - - /* Enable the SPDIFRX CSRNE interrupt */ - __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - - if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) - { - /* Start synchronization */ - __HAL_SPDIFRX_SYNC(hspdif); - - /* Wait until SYNCD flag is set */ - do - { - if (count == 0U) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_TIMEOUT; - } - count--; - } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); - - /* Start reception */ - __HAL_SPDIFRX_RCV(hspdif); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data (Data Flow) mode with DMA - * @param hspdif SPDIFRX handle - * @param pData a 32-bit pointer to the Receive data buffer. - * @param Size number of data sample to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) -{ - uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); - - const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX)) - { - /* Process Locked */ - __HAL_LOCK(hspdif); - - hspdif->pRxBuffPtr = pData; - hspdif->RxXferSize = Size; - hspdif->RxXferCount = Size; - - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; - hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; - - /* Set the SPDIFRX Rx DMA Half transfer complete callback */ - hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt; - - /* Set the SPDIFRX Rx DMA transfer complete callback */ - hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt; - - /* Set the DMA error callback */ - hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError; - - /* Enable the DMA request */ - if (HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size) != HAL_OK) - { - /* Set SPDIFRX error */ - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; - - /* Set SPDIFRX state */ - hspdif->State = HAL_SPDIFRX_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_ERROR; - } - - /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/ - hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN; - - if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) - { - /* Start synchronization */ - __HAL_SPDIFRX_SYNC(hspdif); - - /* Wait until SYNCD flag is set */ - do - { - if (count == 0U) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_TIMEOUT; - } - count--; - } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); - - /* Start reception */ - __HAL_SPDIFRX_RCV(hspdif); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data (Control Flow) with DMA - * @param hspdif SPDIFRX handle - * @param pData a 32-bit pointer to the Receive data buffer. - * @param Size number of data (Control Flow) sample to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) -{ - uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); - - const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX)) - { - hspdif->pCsBuffPtr = pData; - hspdif->CsXferSize = Size; - hspdif->CsXferCount = Size; - - /* Process Locked */ - __HAL_LOCK(hspdif); - - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; - hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; - - /* Set the SPDIFRX Rx DMA Half transfer complete callback */ - hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt; - - /* Set the SPDIFRX Rx DMA transfer complete callback */ - hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt; - - /* Set the DMA error callback */ - hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError; - - /* Enable the DMA request */ - if (HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size) != HAL_OK) - { - /* Set SPDIFRX error */ - hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; - - /* Set SPDIFRX state */ - hspdif->State = HAL_SPDIFRX_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_ERROR; - } - - /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/ - hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN; - - if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) - { - /* Start synchronization */ - __HAL_SPDIFRX_SYNC(hspdif); - - /* Wait until SYNCD flag is set */ - do - { - if (count == 0U) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_TIMEOUT; - } - count--; - } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); - - /* Start reception */ - __HAL_SPDIFRX_RCV(hspdif); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief stop the audio stream receive from the Media. - * @param hspdif SPDIFRX handle - * @retval None - */ -HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Process Locked */ - __HAL_LOCK(hspdif); - - /* Disable the SPDIFRX DMA requests */ - hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); - hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); - - /* Disable the SPDIFRX DMA channel */ - __HAL_DMA_DISABLE(hspdif->hdmaDrRx); - __HAL_DMA_DISABLE(hspdif->hdmaCsRx); - - /* Disable SPDIFRX peripheral */ - __HAL_SPDIFRX_IDLE(hspdif); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_OK; -} - -/** - * @brief This function handles SPDIFRX interrupt request. - * @param hspdif SPDIFRX handle - * @retval HAL status - */ -void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif) -{ - uint32_t itFlag = hspdif->Instance->SR; - uint32_t itSource = hspdif->Instance->IMR; - - /* SPDIFRX in mode Data Flow Reception */ - if (((itFlag & SPDIFRX_FLAG_RXNE) == SPDIFRX_FLAG_RXNE) && ((itSource & SPDIFRX_IT_RXNE) == SPDIFRX_IT_RXNE)) - { - __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE); - SPDIFRX_ReceiveDataFlow_IT(hspdif); - } - - /* SPDIFRX in mode Control Flow Reception */ - if (((itFlag & SPDIFRX_FLAG_CSRNE) == SPDIFRX_FLAG_CSRNE) && ((itSource & SPDIFRX_IT_CSRNE) == SPDIFRX_IT_CSRNE)) - { - __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE); - SPDIFRX_ReceiveControlFlow_IT(hspdif); - } - - /* SPDIFRX Overrun error interrupt occurred */ - if (((itFlag & SPDIFRX_FLAG_OVR) == SPDIFRX_FLAG_OVR) && ((itSource & SPDIFRX_IT_OVRIE) == SPDIFRX_IT_OVRIE)) - { - __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_OVRIE); - - /* Change the SPDIFRX error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR; - - /* the transfer is not stopped */ - HAL_SPDIFRX_ErrorCallback(hspdif); - } - - /* SPDIFRX Parity error interrupt occurred */ - if (((itFlag & SPDIFRX_FLAG_PERR) == SPDIFRX_FLAG_PERR) && ((itSource & SPDIFRX_IT_PERRIE) == SPDIFRX_IT_PERRIE)) - { - __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_PERRIE); - - /* Change the SPDIFRX error code */ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE; - - /* the transfer is not stopped */ - HAL_SPDIFRX_ErrorCallback(hspdif); - } -} - -/** - * @brief Rx Transfer (Data flow) half completed callbacks - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer (Data flow) completed callbacks - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx (Control flow) Transfer half completed callbacks - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer (Control flow) completed callbacks - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief SPDIFRX error callbacks - * @param hspdif SPDIFRX handle - * @retval None - */ -__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspdif); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPDIFRX_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral State functions - * -@verbatim -=============================================================================== -##### Peripheral State and Errors functions ##### -=============================================================================== -[..] -This subsection permit to get in run-time the status of the peripheral -and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the SPDIFRX state - * @param hspdif SPDIFRX handle - * @retval HAL state - */ -HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif) -{ - return hspdif->State; -} - -/** - * @brief Return the SPDIFRX error code - * @param hspdif SPDIFRX handle - * @retval SPDIFRX Error Code - */ -uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif) -{ - return hspdif->ErrorCode; -} - -/** - * @} - */ - -/** - * @brief DMA SPDIFRX receive process (Data flow) complete callback - * @param hdma DMA handle - * @retval None - */ -static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma) -{ - SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable Rx DMA Request */ - if (hdma->Init.Mode != DMA_CIRCULAR) - { - hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); - hspdif->RxXferCount = 0; - hspdif->State = HAL_SPDIFRX_STATE_READY; - } -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - hspdif->RxCpltCallback(hspdif); -#else - HAL_SPDIFRX_RxCpltCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPDIFRX receive process (Data flow) half complete callback - * @param hdma DMA handle - * @retval None - */ -static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - hspdif->RxHalfCpltCallback(hspdif); -#else - HAL_SPDIFRX_RxHalfCpltCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA SPDIFRX receive process (Control flow) complete callback - * @param hdma DMA handle - * @retval None - */ -static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma) -{ - SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable Cb DMA Request */ - hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); - hspdif->CsXferCount = 0; - - hspdif->State = HAL_SPDIFRX_STATE_READY; -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - hspdif->CxCpltCallback(hspdif); -#else - HAL_SPDIFRX_CxCpltCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPDIFRX receive process (Control flow) half complete callback - * @param hdma DMA handle - * @retval None - */ -static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma) -{ - SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - hspdif->CxHalfCpltCallback(hspdif); -#else - HAL_SPDIFRX_CxHalfCpltCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPDIFRX communication error callback - * @param hdma DMA handle - * @retval None - */ -static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma) -{ - SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable Rx and Cb DMA Request */ - hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN)); - hspdif->RxXferCount = 0; - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Set the error code and execute error callback*/ - hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA; - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - /* The transfer is not stopped */ - hspdif->ErrorCallback(hspdif); -#else - /* The transfer is not stopped */ - HAL_SPDIFRX_ErrorCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ -} - -/** - * @brief Receive an amount of data (Data Flow) with Interrupt - * @param hspdif SPDIFRX handle - * @retval None - */ -static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Receive data */ - (*hspdif->pRxBuffPtr) = hspdif->Instance->DR; - hspdif->pRxBuffPtr++; - hspdif->RxXferCount--; - - if (hspdif->RxXferCount == 0U) - { - /* Disable RXNE/PE and OVR interrupts */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - hspdif->RxCpltCallback(hspdif); -#else - HAL_SPDIFRX_RxCpltCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Receive an amount of data (Control Flow) with Interrupt - * @param hspdif SPDIFRX handle - * @retval None - */ -static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif) -{ - /* Receive data */ - (*hspdif->pCsBuffPtr) = hspdif->Instance->CSR; - hspdif->pCsBuffPtr++; - hspdif->CsXferCount--; - - if (hspdif->CsXferCount == 0U) - { - /* Disable CSRNE interrupt */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - -#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) - hspdif->CxCpltCallback(hspdif); -#else - HAL_SPDIFRX_CxCpltCallback(hspdif); -#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ - } -} - -/** - * @brief This function handles SPDIFRX Communication Timeout. - * @param hspdif SPDIFRX handle - * @param Flag Flag checked - * @param Status Value of the flag expected - * @param Timeout Duration of the timeout - * @param tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, - uint32_t Timeout, uint32_t tickstart) -{ - /* Wait until flag is set */ - while (__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); - __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); - - hspdif->State = HAL_SPDIFRX_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspdif); - - return HAL_TIMEOUT; - } - } - } - - return HAL_OK; -} - -/** - * @} - */ -#endif /* STM32F446xx */ - -#endif /* SPDIFRX */ -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c deleted file mode 100644 index 50f9d7f..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c +++ /dev/null @@ -1,293 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_timebase_rtc_wakeup_template.c - * @author MCD Application Team - * @brief HAL time base based on the hardware RTC_WAKEUP Template. - * - * This file overrides the native HAL time base functions (defined as weak) - * to use the RTC WAKEUP for the time base generation: - * + Intializes the RTC peripheral and configures the wakeup timer to be - * incremented each 1ms - * + The wakeup feature is configured to assert an interrupt each 1ms - * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback - * + HSE (default), LSE or LSI can be selected as RTC clock source - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - This file must be copied to the application folder and modified as follows: - (#) Rename it to 'stm32f4xx_hal_timebase_rtc_wakeup.c' - (#) Add this file and the RTC HAL drivers to your project and uncomment - HAL_RTC_MODULE_ENABLED define in stm32f4xx_hal_conf.h - - [..] - (@) HAL RTC alarm and HAL RTC wakeup drivers cant be used with low power modes: - The wake up capability of the RTC may be intrusive in case of prior low power mode - configuration requiring different wake up sources. - Application/Example behavior is no more guaranteed - (@) The stm32f4xx_hal_timebase_tim use is recommended for the Applications/Examples - requiring low power modes - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* Uncomment the line below to select the appropriate RTC Clock source for your application: - + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. - + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing - precision. - + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing - precision. - */ -#define RTC_CLOCK_SOURCE_HSE -/* #define RTC_CLOCK_SOURCE_LSE */ -/* #define RTC_CLOCK_SOURCE_LSI */ - -#ifdef RTC_CLOCK_SOURCE_HSE - #define RTC_ASYNCH_PREDIV 99U - #define RTC_SYNCH_PREDIV 9U - #define RCC_RTCCLKSOURCE_1MHZ ((uint32_t)((uint32_t)RCC_BDCR_RTCSEL | (uint32_t)((HSE_VALUE/1000000U) << 16U))) -#else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */ - #define RTC_ASYNCH_PREDIV 0U - #define RTC_SYNCH_PREDIV 31U -#endif /* RTC_CLOCK_SOURCE_HSE */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -RTC_HandleTypeDef hRTC_Handle; - -/* Private function prototypes -----------------------------------------------*/ -void RTC_WKUP_IRQHandler(void); - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief This function configures the RTC_WKUP as a time base source. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. - * Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK - = 1ms - * Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) - = 1 ms - * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). - * @param TickPriority Tick interrupt priority. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) -{ - __IO uint32_t counter = 0U; - - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - HAL_StatusTypeDef status; - -#ifdef RTC_CLOCK_SOURCE_LSE - /* Configue LSE as RTC clock soucre */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - RCC_OscInitStruct.LSEState = RCC_LSE_ON; - PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; -#elif defined (RTC_CLOCK_SOURCE_LSI) - /* Configue LSI as RTC clock soucre */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; -#elif defined (RTC_CLOCK_SOURCE_HSE) - /* Configue HSE as RTC clock soucre */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - /* Ensure that RTC is clocked by 1MHz */ - PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_1MHZ; -#else -#error Please select the RTC Clock source -#endif /* RTC_CLOCK_SOURCE_LSE */ - - status = HAL_RCC_OscConfig(&RCC_OscInitStruct); - if (status == HAL_OK) - { - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; - status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - } - if (status == HAL_OK) - { - /* Enable RTC Clock */ - __HAL_RCC_RTC_ENABLE(); - /* The time base should be 1ms - Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK - HSE as RTC clock - Time base = ((99 + 1) * (9 + 1)) / 1Mhz - = 1ms - LSE as RTC clock - Time base = ((31 + 1) * (0 + 1)) / 32.768Khz - = ~1ms - LSI as RTC clock - Time base = ((31 + 1) * (0 + 1)) / 32Khz - = 1ms - */ - hRTC_Handle.Instance = RTC; - hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; - hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; - hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; - hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; - hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; - hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; - status = HAL_RTC_Init(&hRTC_Handle); - } - if (status == HAL_OK) - { - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); - - /* Disable the Wake-up Timer */ - __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); - - /* In case of interrupt mode is used, the interrupt source must disabled */ - __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); - - /* Wait till RTC WUTWF flag is set */ - while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(&hRTC_Handle, RTC_FLAG_WUTWF) == RESET) - { - if (counter++ == (SystemCoreClock / 48U)) - { - status = HAL_ERROR; - } - } - } - if (status == HAL_OK) - { - /* Clear PWR wake up Flag */ - __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU); - - /* Clear RTC Wake Up timer Flag */ - __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_WUTF); - - /* Configure the Wake-up Timer counter */ - hRTC_Handle.Instance->WUTR = 0U; - - /* Clear the Wake-up Timer clock source bits in CR register */ - hRTC_Handle.Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; - - /* Configure the clock source */ - hRTC_Handle.Instance->CR |= (uint32_t)RTC_WAKEUPCLOCK_CK_SPRE_16BITS; - - /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ - __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); - - __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); - - /* Configure the Interrupt in the RTC_CR register */ - __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle,RTC_IT_WUT); - - /* Enable the Wake-up Timer */ - __HAL_RTC_WAKEUPTIMER_ENABLE(&hRTC_Handle); - - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); - - /* Enable the RTC global Interrupt */ - HAL_NVIC_EnableIRQ(RTC_WKUP_IRQn); - - /* Configure the SysTick IRQ priority */ - if (TickPriority < (1UL << __NVIC_PRIO_BITS)) - { - HAL_NVIC_SetPriority(RTC_WKUP_IRQn, TickPriority, 0U); - uwTickPrio = TickPriority; - } - else - { - status = HAL_ERROR; - } - } - return status; -} - -/** - * @brief Suspend Tick increment. - * @note Disable the tick increment by disabling RTC_WKUP interrupt. - * @retval None - */ -void HAL_SuspendTick(void) -{ - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); - /* Disable WAKE UP TIMER Interrupt */ - __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); -} - -/** - * @brief Resume Tick increment. - * @note Enable the tick increment by Enabling RTC_WKUP interrupt. - * @retval None - */ -void HAL_ResumeTick(void) -{ - /* Disable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); - /* Enable WAKE UP TIMER interrupt */ - __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); - /* Enable the write protection for RTC registers */ - __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); -} - -/** - * @brief Wake Up Timer Event Callback in non blocking mode - * @note This function is called when RTC_WKUP interrupt took place, inside - * RTC_WKUP_IRQHandler(). It makes a direct call to HAL_IncTick() to increment - * a global variable "uwTick" used as application time base. - * @param hrtc RTC handle - * @retval None - */ -void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) -{ - HAL_IncTick(); -} - -/** - * @brief This function handles WAKE UP TIMER interrupt request. - * @retval None - */ -void RTC_WKUP_IRQHandler(void) -{ - HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); -} - -/** - * @} - */ - -/** - * @} - */ - - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c deleted file mode 100644 index a83c086..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c +++ /dev/null @@ -1,423 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dma.c - * @author MCD Application Team - * @brief DMA LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_dma.h" -#include "stm32f4xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (DMA1) || defined (DMA2) - -/** @defgroup DMA_LL DMA - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup DMA_LL_Private_Macros - * @{ - */ -#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ - ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ - ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) - -#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ - ((__VALUE__) == LL_DMA_MODE_CIRCULAR) || \ - ((__VALUE__) == LL_DMA_MODE_PFCTRL)) - -#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ - ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) - -#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ - ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) - -#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ - ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ - ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) - -#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ - ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ - ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) - -#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) - -#define IS_LL_DMA_CHANNEL(__VALUE__) (((__VALUE__) == LL_DMA_CHANNEL_0) || \ - ((__VALUE__) == LL_DMA_CHANNEL_1) || \ - ((__VALUE__) == LL_DMA_CHANNEL_2) || \ - ((__VALUE__) == LL_DMA_CHANNEL_3) || \ - ((__VALUE__) == LL_DMA_CHANNEL_4) || \ - ((__VALUE__) == LL_DMA_CHANNEL_5) || \ - ((__VALUE__) == LL_DMA_CHANNEL_6) || \ - ((__VALUE__) == LL_DMA_CHANNEL_7)) - -#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ - ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ - ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ - ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) - -#define IS_LL_DMA_ALL_STREAM_INSTANCE(INSTANCE, STREAM) ((((INSTANCE) == DMA1) && \ - (((STREAM) == LL_DMA_STREAM_0) || \ - ((STREAM) == LL_DMA_STREAM_1) || \ - ((STREAM) == LL_DMA_STREAM_2) || \ - ((STREAM) == LL_DMA_STREAM_3) || \ - ((STREAM) == LL_DMA_STREAM_4) || \ - ((STREAM) == LL_DMA_STREAM_5) || \ - ((STREAM) == LL_DMA_STREAM_6) || \ - ((STREAM) == LL_DMA_STREAM_7) || \ - ((STREAM) == LL_DMA_STREAM_ALL))) ||\ - (((INSTANCE) == DMA2) && \ - (((STREAM) == LL_DMA_STREAM_0) || \ - ((STREAM) == LL_DMA_STREAM_1) || \ - ((STREAM) == LL_DMA_STREAM_2) || \ - ((STREAM) == LL_DMA_STREAM_3) || \ - ((STREAM) == LL_DMA_STREAM_4) || \ - ((STREAM) == LL_DMA_STREAM_5) || \ - ((STREAM) == LL_DMA_STREAM_6) || \ - ((STREAM) == LL_DMA_STREAM_7) || \ - ((STREAM) == LL_DMA_STREAM_ALL)))) - -#define IS_LL_DMA_FIFO_MODE_STATE(STATE) (((STATE) == LL_DMA_FIFOMODE_DISABLE ) || \ - ((STATE) == LL_DMA_FIFOMODE_ENABLE)) - -#define IS_LL_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_1_4) || \ - ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_1_2) || \ - ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_3_4) || \ - ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_FULL)) - -#define IS_LL_DMA_MEMORY_BURST(BURST) (((BURST) == LL_DMA_MBURST_SINGLE) || \ - ((BURST) == LL_DMA_MBURST_INC4) || \ - ((BURST) == LL_DMA_MBURST_INC8) || \ - ((BURST) == LL_DMA_MBURST_INC16)) - -#define IS_LL_DMA_PERIPHERAL_BURST(BURST) (((BURST) == LL_DMA_PBURST_SINGLE) || \ - ((BURST) == LL_DMA_PBURST_INC4) || \ - ((BURST) == LL_DMA_PBURST_INC8) || \ - ((BURST) == LL_DMA_PBURST_INC16)) - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMA_LL_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the DMA registers to their default reset values. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @arg @ref LL_DMA_STREAM_ALL - * @retval An ErrorStatus enumeration value: - * - SUCCESS: DMA registers are de-initialized - * - ERROR: DMA registers are not de-initialized - */ -uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream) -{ - DMA_Stream_TypeDef *tmp = (DMA_Stream_TypeDef *)DMA1_Stream0; - ErrorStatus status = SUCCESS; - - /* Check the DMA Instance DMAx and Stream parameters*/ - assert_param(IS_LL_DMA_ALL_STREAM_INSTANCE(DMAx, Stream)); - - if (Stream == LL_DMA_STREAM_ALL) - { - if (DMAx == DMA1) - { - /* Force reset of DMA clock */ - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); - - /* Release reset of DMA clock */ - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); - } - else if (DMAx == DMA2) - { - /* Force reset of DMA clock */ - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2); - - /* Release reset of DMA clock */ - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2); - } - else - { - status = ERROR; - } - } - else - { - /* Disable the selected Stream */ - LL_DMA_DisableStream(DMAx,Stream); - - /* Get the DMA Stream Instance */ - tmp = (DMA_Stream_TypeDef *)(__LL_DMA_GET_STREAM_INSTANCE(DMAx, Stream)); - - /* Reset DMAx_Streamy configuration register */ - LL_DMA_WriteReg(tmp, CR, 0U); - - /* Reset DMAx_Streamy remaining bytes register */ - LL_DMA_WriteReg(tmp, NDTR, 0U); - - /* Reset DMAx_Streamy peripheral address register */ - LL_DMA_WriteReg(tmp, PAR, 0U); - - /* Reset DMAx_Streamy memory address register */ - LL_DMA_WriteReg(tmp, M0AR, 0U); - - /* Reset DMAx_Streamy memory address register */ - LL_DMA_WriteReg(tmp, M1AR, 0U); - - /* Reset DMAx_Streamy FIFO control register */ - LL_DMA_WriteReg(tmp, FCR, 0x00000021U); - - /* Reset Channel register field for DMAx Stream*/ - LL_DMA_SetChannelSelection(DMAx, Stream, LL_DMA_CHANNEL_0); - - if(Stream == LL_DMA_STREAM_0) - { - /* Reset the Stream0 pending flags */ - DMAx->LIFCR = 0x0000003FU; - } - else if(Stream == LL_DMA_STREAM_1) - { - /* Reset the Stream1 pending flags */ - DMAx->LIFCR = 0x00000F40U; - } - else if(Stream == LL_DMA_STREAM_2) - { - /* Reset the Stream2 pending flags */ - DMAx->LIFCR = 0x003F0000U; - } - else if(Stream == LL_DMA_STREAM_3) - { - /* Reset the Stream3 pending flags */ - DMAx->LIFCR = 0x0F400000U; - } - else if(Stream == LL_DMA_STREAM_4) - { - /* Reset the Stream4 pending flags */ - DMAx->HIFCR = 0x0000003FU; - } - else if(Stream == LL_DMA_STREAM_5) - { - /* Reset the Stream5 pending flags */ - DMAx->HIFCR = 0x00000F40U; - } - else if(Stream == LL_DMA_STREAM_6) - { - /* Reset the Stream6 pending flags */ - DMAx->HIFCR = 0x003F0000U; - } - else if(Stream == LL_DMA_STREAM_7) - { - /* Reset the Stream7 pending flags */ - DMAx->HIFCR = 0x0F400000U; - } - else - { - status = ERROR; - } - } - - return status; -} - -/** - * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. - * @note To convert DMAx_Streamy Instance to DMAx Instance and Streamy, use helper macros : - * @arg @ref __LL_DMA_GET_INSTANCE - * @arg @ref __LL_DMA_GET_STREAM - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: DMA registers are initialized - * - ERROR: Not applicable - */ -uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct) -{ - /* Check the DMA Instance DMAx and Stream parameters*/ - assert_param(IS_LL_DMA_ALL_STREAM_INSTANCE(DMAx, Stream)); - - /* Check the DMA parameters from DMA_InitStruct */ - assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); - assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); - assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); - assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); - assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); - assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); - assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); - assert_param(IS_LL_DMA_CHANNEL(DMA_InitStruct->Channel)); - assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); - assert_param(IS_LL_DMA_FIFO_MODE_STATE(DMA_InitStruct->FIFOMode)); - /* Check the memory burst, peripheral burst and FIFO threshold parameters only - when FIFO mode is enabled */ - if(DMA_InitStruct->FIFOMode != LL_DMA_FIFOMODE_DISABLE) - { - assert_param(IS_LL_DMA_FIFO_THRESHOLD(DMA_InitStruct->FIFOThreshold)); - assert_param(IS_LL_DMA_MEMORY_BURST(DMA_InitStruct->MemBurst)); - assert_param(IS_LL_DMA_PERIPHERAL_BURST(DMA_InitStruct->PeriphBurst)); - } - - /*---------------------------- DMAx SxCR Configuration ------------------------ - * Configure DMAx_Streamy: data transfer direction, data transfer mode, - * peripheral and memory increment mode, - * data size alignment and priority level with parameters : - * - Direction: DMA_SxCR_DIR[1:0] bits - * - Mode: DMA_SxCR_CIRC bit - * - PeriphOrM2MSrcIncMode: DMA_SxCR_PINC bit - * - MemoryOrM2MDstIncMode: DMA_SxCR_MINC bit - * - PeriphOrM2MSrcDataSize: DMA_SxCR_PSIZE[1:0] bits - * - MemoryOrM2MDstDataSize: DMA_SxCR_MSIZE[1:0] bits - * - Priority: DMA_SxCR_PL[1:0] bits - */ - LL_DMA_ConfigTransfer(DMAx, Stream, DMA_InitStruct->Direction | \ - DMA_InitStruct->Mode | \ - DMA_InitStruct->PeriphOrM2MSrcIncMode | \ - DMA_InitStruct->MemoryOrM2MDstIncMode | \ - DMA_InitStruct->PeriphOrM2MSrcDataSize | \ - DMA_InitStruct->MemoryOrM2MDstDataSize | \ - DMA_InitStruct->Priority - ); - - if(DMA_InitStruct->FIFOMode != LL_DMA_FIFOMODE_DISABLE) - { - /*---------------------------- DMAx SxFCR Configuration ------------------------ - * Configure DMAx_Streamy: fifo mode and fifo threshold with parameters : - * - FIFOMode: DMA_SxFCR_DMDIS bit - * - FIFOThreshold: DMA_SxFCR_FTH[1:0] bits - */ - LL_DMA_ConfigFifo(DMAx, Stream, DMA_InitStruct->FIFOMode, DMA_InitStruct->FIFOThreshold); - - /*---------------------------- DMAx SxCR Configuration -------------------------- - * Configure DMAx_Streamy: memory burst transfer with parameters : - * - MemBurst: DMA_SxCR_MBURST[1:0] bits - */ - LL_DMA_SetMemoryBurstxfer(DMAx,Stream,DMA_InitStruct->MemBurst); - - /*---------------------------- DMAx SxCR Configuration -------------------------- - * Configure DMAx_Streamy: peripheral burst transfer with parameters : - * - PeriphBurst: DMA_SxCR_PBURST[1:0] bits - */ - LL_DMA_SetPeriphBurstxfer(DMAx,Stream,DMA_InitStruct->PeriphBurst); - } - - /*-------------------------- DMAx SxM0AR Configuration -------------------------- - * Configure the memory or destination base address with parameter : - * - MemoryOrM2MDstAddress: DMA_SxM0AR_M0A[31:0] bits - */ - LL_DMA_SetMemoryAddress(DMAx, Stream, DMA_InitStruct->MemoryOrM2MDstAddress); - - /*-------------------------- DMAx SxPAR Configuration --------------------------- - * Configure the peripheral or source base address with parameter : - * - PeriphOrM2MSrcAddress: DMA_SxPAR_PA[31:0] bits - */ - LL_DMA_SetPeriphAddress(DMAx, Stream, DMA_InitStruct->PeriphOrM2MSrcAddress); - - /*--------------------------- DMAx SxNDTR Configuration ------------------------- - * Configure the peripheral base address with parameter : - * - NbData: DMA_SxNDT[15:0] bits - */ - LL_DMA_SetDataLength(DMAx, Stream, DMA_InitStruct->NbData); - - /*--------------------------- DMA SxCR_CHSEL Configuration ---------------------- - * Configure the peripheral base address with parameter : - * - PeriphRequest: DMA_SxCR_CHSEL[2:0] bits - */ - LL_DMA_SetChannelSelection(DMAx, Stream, DMA_InitStruct->Channel); - - return SUCCESS; -} - -/** - * @brief Set each @ref LL_DMA_InitTypeDef field to default value. - * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. - * @retval None - */ -void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) -{ - /* Set DMA_InitStruct fields to default values */ - DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; - DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; - DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; - DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; - DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; - DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; - DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; - DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; - DMA_InitStruct->NbData = 0x00000000U; - DMA_InitStruct->Channel = LL_DMA_CHANNEL_0; - DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; - DMA_InitStruct->FIFOMode = LL_DMA_FIFOMODE_DISABLE; - DMA_InitStruct->FIFOThreshold = LL_DMA_FIFOTHRESHOLD_1_4; - DMA_InitStruct->MemBurst = LL_DMA_MBURST_SINGLE; - DMA_InitStruct->PeriphBurst = LL_DMA_PBURST_SINGLE; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMA1 || DMA2 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma2d.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma2d.c deleted file mode 100644 index 9f6c8f5..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma2d.c +++ /dev/null @@ -1,594 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dma2d.c - * @author MCD Application Team - * @brief DMA2D LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_dma2d.h" -#include "stm32f4xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (DMA2D) - -/** @addtogroup DMA2D_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup DMA2D_LL_Private_Constants DMA2D Private Constants - * @{ - */ -#define LL_DMA2D_COLOR 0xFFU /*!< Maximum output color setting */ -#define LL_DMA2D_NUMBEROFLINES DMA2D_NLR_NL /*!< Maximum number of lines */ -#define LL_DMA2D_NUMBEROFPIXELS (DMA2D_NLR_PL >> DMA2D_NLR_PL_Pos) /*!< Maximum number of pixels per lines */ -#define LL_DMA2D_OFFSET_MAX 0x3FFFU /*!< Maximum output line offset expressed in pixels */ -#define LL_DMA2D_CLUTSIZE_MAX 0xFFU /*!< Maximum CLUT size */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup DMA2D_LL_Private_Macros - * @{ - */ -#define IS_LL_DMA2D_MODE(MODE) (((MODE) == LL_DMA2D_MODE_M2M) || \ - ((MODE) == LL_DMA2D_MODE_M2M_PFC) || \ - ((MODE) == LL_DMA2D_MODE_M2M_BLEND) || \ - ((MODE) == LL_DMA2D_MODE_R2M)) - -#define IS_LL_DMA2D_OCMODE(MODE_ARGB) (((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB8888) || \ - ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_RGB888) || \ - ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_RGB565) || \ - ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB1555) || \ - ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB4444)) - -#define IS_LL_DMA2D_GREEN(GREEN) ((GREEN) <= LL_DMA2D_COLOR) -#define IS_LL_DMA2D_RED(RED) ((RED) <= LL_DMA2D_COLOR) -#define IS_LL_DMA2D_BLUE(BLUE) ((BLUE) <= LL_DMA2D_COLOR) -#define IS_LL_DMA2D_ALPHA(ALPHA) ((ALPHA) <= LL_DMA2D_COLOR) - - -#define IS_LL_DMA2D_OFFSET(OFFSET) ((OFFSET) <= LL_DMA2D_OFFSET_MAX) - -#define IS_LL_DMA2D_LINE(LINES) ((LINES) <= LL_DMA2D_NUMBEROFLINES) -#define IS_LL_DMA2D_PIXEL(PIXELS) ((PIXELS) <= LL_DMA2D_NUMBEROFPIXELS) - - - -#define IS_LL_DMA2D_LCMODE(MODE_ARGB) (((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB8888) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_RGB888) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_RGB565) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB1555) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB4444) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_L8) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_AL44) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_AL88) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_L4) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_A8) || \ - ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_A4)) - -#define IS_LL_DMA2D_CLUTCMODE(CLUTCMODE) (((CLUTCMODE) == LL_DMA2D_CLUT_COLOR_MODE_ARGB8888) || \ - ((CLUTCMODE) == LL_DMA2D_CLUT_COLOR_MODE_RGB888)) - -#define IS_LL_DMA2D_CLUTSIZE(SIZE) ((SIZE) <= LL_DMA2D_CLUTSIZE_MAX) - -#define IS_LL_DMA2D_ALPHAMODE(MODE) (((MODE) == LL_DMA2D_ALPHA_MODE_NO_MODIF) || \ - ((MODE) == LL_DMA2D_ALPHA_MODE_REPLACE) || \ - ((MODE) == LL_DMA2D_ALPHA_MODE_COMBINE)) - - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMA2D_LL_Exported_Functions - * @{ - */ - -/** @addtogroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions - * @{ - */ - -/** - * @brief De-initialize DMA2D registers (registers restored to their default values). - * @param DMA2Dx DMA2D Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: DMA2D registers are de-initialized - * - ERROR: DMA2D registers are not de-initialized - */ -ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - - if (DMA2Dx == DMA2D) - { - /* Force reset of DMA2D clock */ - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2D); - - /* Release reset of DMA2D clock */ - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2D); - } - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Initialize DMA2D registers according to the specified parameters in DMA2D_InitStruct. - * @note DMA2D transfers must be disabled to set initialization bits in configuration registers, - * otherwise ERROR result is returned. - * @param DMA2Dx DMA2D Instance - * @param DMA2D_InitStruct pointer to a LL_DMA2D_InitTypeDef structure - * that contains the configuration information for the specified DMA2D peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: DMA2D registers are initialized according to DMA2D_InitStruct content - * - ERROR: Issue occurred during DMA2D registers initialization - */ -ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct) -{ - ErrorStatus status = ERROR; - LL_DMA2D_ColorTypeDef dma2d_colorstruct; - uint32_t tmp; - uint32_t tmp1; - uint32_t tmp2; - uint32_t regMask; - uint32_t regValue; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - assert_param(IS_LL_DMA2D_MODE(DMA2D_InitStruct->Mode)); - assert_param(IS_LL_DMA2D_OCMODE(DMA2D_InitStruct->ColorMode)); - assert_param(IS_LL_DMA2D_LINE(DMA2D_InitStruct->NbrOfLines)); - assert_param(IS_LL_DMA2D_PIXEL(DMA2D_InitStruct->NbrOfPixelsPerLines)); - assert_param(IS_LL_DMA2D_GREEN(DMA2D_InitStruct->OutputGreen)); - assert_param(IS_LL_DMA2D_RED(DMA2D_InitStruct->OutputRed)); - assert_param(IS_LL_DMA2D_BLUE(DMA2D_InitStruct->OutputBlue)); - assert_param(IS_LL_DMA2D_ALPHA(DMA2D_InitStruct->OutputAlpha)); - assert_param(IS_LL_DMA2D_OFFSET(DMA2D_InitStruct->LineOffset)); - - /* DMA2D transfers must be disabled to configure bits in initialization registers */ - tmp = LL_DMA2D_IsTransferOngoing(DMA2Dx); - tmp1 = LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2Dx); - tmp2 = LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2Dx); - if ((tmp == 0U) && (tmp1 == 0U) && (tmp2 == 0U)) - { - /* DMA2D CR register configuration -------------------------------------------*/ - LL_DMA2D_SetMode(DMA2Dx, DMA2D_InitStruct->Mode); - - /* DMA2D OPFCCR register configuration ---------------------------------------*/ - regMask = DMA2D_OPFCCR_CM; - regValue = DMA2D_InitStruct->ColorMode; - - - - - MODIFY_REG(DMA2Dx->OPFCCR, regMask, regValue); - - /* DMA2D OOR register configuration ------------------------------------------*/ - LL_DMA2D_SetLineOffset(DMA2Dx, DMA2D_InitStruct->LineOffset); - - /* DMA2D NLR register configuration ------------------------------------------*/ - LL_DMA2D_ConfigSize(DMA2Dx, DMA2D_InitStruct->NbrOfLines, DMA2D_InitStruct->NbrOfPixelsPerLines); - - /* DMA2D OMAR register configuration ------------------------------------------*/ - LL_DMA2D_SetOutputMemAddr(DMA2Dx, DMA2D_InitStruct->OutputMemoryAddress); - - /* DMA2D OCOLR register configuration ------------------------------------------*/ - dma2d_colorstruct.ColorMode = DMA2D_InitStruct->ColorMode; - dma2d_colorstruct.OutputBlue = DMA2D_InitStruct->OutputBlue; - dma2d_colorstruct.OutputGreen = DMA2D_InitStruct->OutputGreen; - dma2d_colorstruct.OutputRed = DMA2D_InitStruct->OutputRed; - dma2d_colorstruct.OutputAlpha = DMA2D_InitStruct->OutputAlpha; - LL_DMA2D_ConfigOutputColor(DMA2Dx, &dma2d_colorstruct); - - status = SUCCESS; - } - /* If DMA2D transfers are not disabled, return ERROR */ - - return (status); -} - -/** - * @brief Set each @ref LL_DMA2D_InitTypeDef field to default value. - * @param DMA2D_InitStruct pointer to a @ref LL_DMA2D_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct) -{ - /* Set DMA2D_InitStruct fields to default values */ - DMA2D_InitStruct->Mode = LL_DMA2D_MODE_M2M; - DMA2D_InitStruct->ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB8888; - DMA2D_InitStruct->NbrOfLines = 0x0U; - DMA2D_InitStruct->NbrOfPixelsPerLines = 0x0U; - DMA2D_InitStruct->LineOffset = 0x0U; - DMA2D_InitStruct->OutputBlue = 0x0U; - DMA2D_InitStruct->OutputGreen = 0x0U; - DMA2D_InitStruct->OutputRed = 0x0U; - DMA2D_InitStruct->OutputAlpha = 0x0U; - DMA2D_InitStruct->OutputMemoryAddress = 0x0U; -} - -/** - * @brief Configure the foreground or background according to the specified parameters - * in the LL_DMA2D_LayerCfgTypeDef structure. - * @param DMA2Dx DMA2D Instance - * @param DMA2D_LayerCfg pointer to a LL_DMA2D_LayerCfgTypeDef structure that contains - * the configuration information for the specified layer. - * @param LayerIdx DMA2D Layer index. - * This parameter can be one of the following values: - * 0(background) / 1(foreground) - * @retval None - */ -void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx) -{ - /* Check the parameters */ - assert_param(IS_LL_DMA2D_OFFSET(DMA2D_LayerCfg->LineOffset)); - assert_param(IS_LL_DMA2D_LCMODE(DMA2D_LayerCfg->ColorMode)); - assert_param(IS_LL_DMA2D_CLUTCMODE(DMA2D_LayerCfg->CLUTColorMode)); - assert_param(IS_LL_DMA2D_CLUTSIZE(DMA2D_LayerCfg->CLUTSize)); - assert_param(IS_LL_DMA2D_ALPHAMODE(DMA2D_LayerCfg->AlphaMode)); - assert_param(IS_LL_DMA2D_GREEN(DMA2D_LayerCfg->Green)); - assert_param(IS_LL_DMA2D_RED(DMA2D_LayerCfg->Red)); - assert_param(IS_LL_DMA2D_BLUE(DMA2D_LayerCfg->Blue)); - assert_param(IS_LL_DMA2D_ALPHA(DMA2D_LayerCfg->Alpha)); - - - if (LayerIdx == 0U) - { - /* Configure the background memory address */ - LL_DMA2D_BGND_SetMemAddr(DMA2Dx, DMA2D_LayerCfg->MemoryAddress); - - /* Configure the background line offset */ - LL_DMA2D_BGND_SetLineOffset(DMA2Dx, DMA2D_LayerCfg->LineOffset); - - /* Configure the background Alpha value, Alpha mode, CLUT size, CLUT Color mode and Color mode */ - MODIFY_REG(DMA2Dx->BGPFCCR, \ - (DMA2D_BGPFCCR_ALPHA | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM | DMA2D_BGPFCCR_CM), \ - ((DMA2D_LayerCfg->Alpha << DMA2D_BGPFCCR_ALPHA_Pos) | DMA2D_LayerCfg->AlphaMode | \ - (DMA2D_LayerCfg->CLUTSize << DMA2D_BGPFCCR_CS_Pos) | DMA2D_LayerCfg->CLUTColorMode | \ - DMA2D_LayerCfg->ColorMode)); - - /* Configure the background color */ - LL_DMA2D_BGND_SetColor(DMA2Dx, DMA2D_LayerCfg->Red, DMA2D_LayerCfg->Green, DMA2D_LayerCfg->Blue); - - /* Configure the background CLUT memory address */ - LL_DMA2D_BGND_SetCLUTMemAddr(DMA2Dx, DMA2D_LayerCfg->CLUTMemoryAddress); - } - else - { - /* Configure the foreground memory address */ - LL_DMA2D_FGND_SetMemAddr(DMA2Dx, DMA2D_LayerCfg->MemoryAddress); - - /* Configure the foreground line offset */ - LL_DMA2D_FGND_SetLineOffset(DMA2Dx, DMA2D_LayerCfg->LineOffset); - - /* Configure the foreground Alpha value, Alpha mode, CLUT size, CLUT Color mode and Color mode */ - MODIFY_REG(DMA2Dx->FGPFCCR, \ - (DMA2D_FGPFCCR_ALPHA | DMA2D_FGPFCCR_AM | DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM | DMA2D_FGPFCCR_CM), \ - ((DMA2D_LayerCfg->Alpha << DMA2D_FGPFCCR_ALPHA_Pos) | DMA2D_LayerCfg->AlphaMode | \ - (DMA2D_LayerCfg->CLUTSize << DMA2D_FGPFCCR_CS_Pos) | DMA2D_LayerCfg->CLUTColorMode | \ - DMA2D_LayerCfg->ColorMode)); - - /* Configure the foreground color */ - LL_DMA2D_FGND_SetColor(DMA2Dx, DMA2D_LayerCfg->Red, DMA2D_LayerCfg->Green, DMA2D_LayerCfg->Blue); - - /* Configure the foreground CLUT memory address */ - LL_DMA2D_FGND_SetCLUTMemAddr(DMA2Dx, DMA2D_LayerCfg->CLUTMemoryAddress); - } -} - -/** - * @brief Set each @ref LL_DMA2D_LayerCfgTypeDef field to default value. - * @param DMA2D_LayerCfg pointer to a @ref LL_DMA2D_LayerCfgTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg) -{ - /* Set DMA2D_LayerCfg fields to default values */ - DMA2D_LayerCfg->MemoryAddress = 0x0U; - DMA2D_LayerCfg->ColorMode = LL_DMA2D_INPUT_MODE_ARGB8888; - DMA2D_LayerCfg->LineOffset = 0x0U; - DMA2D_LayerCfg->CLUTColorMode = LL_DMA2D_CLUT_COLOR_MODE_ARGB8888; - DMA2D_LayerCfg->CLUTSize = 0x0U; - DMA2D_LayerCfg->AlphaMode = LL_DMA2D_ALPHA_MODE_NO_MODIF; - DMA2D_LayerCfg->Alpha = 0x0U; - DMA2D_LayerCfg->Blue = 0x0U; - DMA2D_LayerCfg->Green = 0x0U; - DMA2D_LayerCfg->Red = 0x0U; - DMA2D_LayerCfg->CLUTMemoryAddress = 0x0U; -} - -/** - * @brief Initialize DMA2D output color register according to the specified parameters - * in DMA2D_ColorStruct. - * @param DMA2Dx DMA2D Instance - * @param DMA2D_ColorStruct pointer to a LL_DMA2D_ColorTypeDef structure that contains - * the color configuration information for the specified DMA2D peripheral. - * @retval None - */ -void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct) -{ - uint32_t outgreen; - uint32_t outred; - uint32_t outalpha; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - assert_param(IS_LL_DMA2D_OCMODE(DMA2D_ColorStruct->ColorMode)); - assert_param(IS_LL_DMA2D_GREEN(DMA2D_ColorStruct->OutputGreen)); - assert_param(IS_LL_DMA2D_RED(DMA2D_ColorStruct->OutputRed)); - assert_param(IS_LL_DMA2D_BLUE(DMA2D_ColorStruct->OutputBlue)); - assert_param(IS_LL_DMA2D_ALPHA(DMA2D_ColorStruct->OutputAlpha)); - - /* DMA2D OCOLR register configuration ------------------------------------------*/ - if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) - { - outgreen = DMA2D_ColorStruct->OutputGreen << 8U; - outred = DMA2D_ColorStruct->OutputRed << 16U; - outalpha = DMA2D_ColorStruct->OutputAlpha << 24U; - } - else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) - { - outgreen = DMA2D_ColorStruct->OutputGreen << 8U; - outred = DMA2D_ColorStruct->OutputRed << 16U; - outalpha = 0x00000000U; - } - else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) - { - outgreen = DMA2D_ColorStruct->OutputGreen << 5U; - outred = DMA2D_ColorStruct->OutputRed << 11U; - outalpha = 0x00000000U; - } - else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) - { - outgreen = DMA2D_ColorStruct->OutputGreen << 5U; - outred = DMA2D_ColorStruct->OutputRed << 10U; - outalpha = DMA2D_ColorStruct->OutputAlpha << 15U; - } - else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ - { - outgreen = DMA2D_ColorStruct->OutputGreen << 4U; - outred = DMA2D_ColorStruct->OutputRed << 8U; - outalpha = DMA2D_ColorStruct->OutputAlpha << 12U; - } - LL_DMA2D_SetOutputColor(DMA2Dx, (outgreen | outred | DMA2D_ColorStruct->OutputBlue | outalpha)); -} - -/** - * @brief Return DMA2D output Blue color. - * @param DMA2Dx DMA2D Instance. - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 - * @retval Output Blue color value between Min_Data=0 and Max_Data=0xFF - */ -uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - uint32_t color; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); - - /* DMA2D OCOLR register reading ------------------------------------------*/ - if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFFU)); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFFU)); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x1FU)); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x1FU)); - } - else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFU)); - } - - return color; -} - -/** - * @brief Return DMA2D output Green color. - * @param DMA2Dx DMA2D Instance. - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 - * @retval Output Green color value between Min_Data=0 and Max_Data=0xFF - */ -uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - uint32_t color; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); - - /* DMA2D OCOLR register reading ------------------------------------------*/ - if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF00U) >> 8U); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF00U) >> 8U); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x7E0U) >> 5U); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x3E0U) >> 5U); - } - else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF0U) >> 4U); - } - - return color; -} - -/** - * @brief Return DMA2D output Red color. - * @param DMA2Dx DMA2D Instance. - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 - * @retval Output Red color value between Min_Data=0 and Max_Data=0xFF - */ -uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - uint32_t color; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); - - /* DMA2D OCOLR register reading ------------------------------------------*/ - if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF0000U) >> 16U); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF0000U) >> 16U); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF800U) >> 11U); - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x7C00U) >> 10U); - } - else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF00U) >> 8U); - } - - return color; -} - -/** - * @brief Return DMA2D output Alpha color. - * @param DMA2Dx DMA2D Instance. - * @param ColorMode This parameter can be one of the following values: - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 - * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 - * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 - * @retval Output Alpha color value between Min_Data=0 and Max_Data=0xFF - */ -uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) -{ - uint32_t color; - - /* Check the parameters */ - assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); - assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); - - /* DMA2D OCOLR register reading ------------------------------------------*/ - if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF000000U) >> 24U); - } - else if ((ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) || (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565)) - { - color = 0x0U; - } - else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x8000U) >> 15U); - } - else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ - { - color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF000U) >> 12U); - } - - return color; -} - -/** - * @brief Configure DMA2D transfer size. - * @param DMA2Dx DMA2D Instance - * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF - * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF - * @retval None - */ -void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines) -{ - MODIFY_REG(DMA2Dx->NLR, (DMA2D_NLR_PL | DMA2D_NLR_NL), \ - ((NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos) | NbrOfLines)); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (DMA2D) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c deleted file mode 100644 index 1bdf9de..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c +++ /dev/null @@ -1,1498 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fmc.c - * @author MCD Application Team - * @brief FMC Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Flexible Memory Controller (FMC) peripheral memories: - * + Initialization/de-initialization functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### FMC peripheral features ##### - ============================================================================== - [..] The Flexible memory controller (FMC) includes following memory controllers: - (+) The NOR/PSRAM memory controller - (+) The NAND/PC Card memory controller - (+) The Synchronous DRAM (SDRAM) controller - - [..] The FMC functional block makes the interface with synchronous and asynchronous static - memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are: - (+) to translate AHB transactions into the appropriate external device protocol - (+) to meet the access time requirements of the external memory devices - - [..] All external memories share the addresses, data and control signals with the controller. - Each external device is accessed by means of a unique Chip Select. The FMC performs - only one access at a time to an external device. - The main features of the FMC controller are the following: - (+) Interface with static-memory mapped devices including: - (++) Static random access memory (SRAM) - (++) Read-only memory (ROM) - (++) NOR Flash memory/OneNAND Flash memory - (++) PSRAM (4 memory banks) - (++) 16-bit PC Card compatible devices - (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of - data - (+) Interface with synchronous DRAM (SDRAM) memories - (+) Independent Chip Select control for each memory bank - (+) Independent configuration for each memory bank - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_SRAM_MODULE_ENABLED) || (defined(HAL_NAND_MODULE_ENABLED)) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED) - -/** @defgroup FMC_LL FMC Low Layer - * @brief FMC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup FMC_LL_Private_Constants FMC Low Layer Private Constants - * @{ - */ - -/* ----------------------- FMC registers bit mask --------------------------- */ - -#if defined(FMC_Bank1) -/* --- BCR Register ---*/ -/* BCR register clear mask */ - -/* --- BTR Register ---*/ -/* BTR register clear mask */ -#define BTR_CLEAR_MASK ((uint32_t)(FMC_BTR1_ADDSET | FMC_BTR1_ADDHLD |\ - FMC_BTR1_DATAST | FMC_BTR1_BUSTURN |\ - FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT |\ - FMC_BTR1_ACCMOD)) - -/* --- BWTR Register ---*/ -/* BWTR register clear mask */ -#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD |\ - FMC_BWTR1_DATAST | FMC_BWTR1_BUSTURN |\ - FMC_BWTR1_ACCMOD)) -#endif /* FMC_Bank1 */ -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) - -#if defined (FMC_PCR_PWAITEN) -/* --- PCR Register ---*/ -/* PCR register clear mask */ -#define PCR_CLEAR_MASK ((uint32_t)(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | \ - FMC_PCR_PTYP | FMC_PCR_PWID | \ - FMC_PCR_ECCEN | FMC_PCR_TCLR | \ - FMC_PCR_TAR | FMC_PCR_ECCPS)) -/* --- PMEM Register ---*/ -/* PMEM register clear mask */ -#define PMEM_CLEAR_MASK ((uint32_t)(FMC_PMEM_MEMSET2 | FMC_PMEM_MEMWAIT2 |\ - FMC_PMEM_MEMHOLD2 | FMC_PMEM_MEMHIZ2)) - -/* --- PATT Register ---*/ -/* PATT register clear mask */ -#define PATT_CLEAR_MASK ((uint32_t)(FMC_PATT_ATTSET2 | FMC_PATT_ATTWAIT2 |\ - FMC_PATT_ATTHOLD2 | FMC_PATT_ATTHIZ2)) -#else -/* --- PCR Register ---*/ -/* PCR register clear mask */ -#define PCR_CLEAR_MASK ((uint32_t)(FMC_PCR2_PWAITEN | FMC_PCR2_PBKEN | \ - FMC_PCR2_PTYP | FMC_PCR2_PWID | \ - FMC_PCR2_ECCEN | FMC_PCR2_TCLR | \ - FMC_PCR2_TAR | FMC_PCR2_ECCPS)) -/* --- PMEM Register ---*/ -/* PMEM register clear mask */ -#define PMEM_CLEAR_MASK ((uint32_t)(FMC_PMEM2_MEMSET2 | FMC_PMEM2_MEMWAIT2 |\ - FMC_PMEM2_MEMHOLD2 | FMC_PMEM2_MEMHIZ2)) - -/* --- PATT Register ---*/ -/* PATT register clear mask */ -#define PATT_CLEAR_MASK ((uint32_t)(FMC_PATT2_ATTSET2 | FMC_PATT2_ATTWAIT2 |\ - FMC_PATT2_ATTHOLD2 | FMC_PATT2_ATTHIZ2)) - -#endif /* FMC_PCR_PWAITEN */ -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ -#if defined(FMC_Bank4) -/* --- PCR Register ---*/ -/* PCR register clear mask */ -#define PCR4_CLEAR_MASK ((uint32_t)(FMC_PCR4_PWAITEN | FMC_PCR4_PBKEN | \ - FMC_PCR4_PTYP | FMC_PCR4_PWID | \ - FMC_PCR4_ECCEN | FMC_PCR4_TCLR | \ - FMC_PCR4_TAR | FMC_PCR4_ECCPS)) -/* --- PMEM Register ---*/ -/* PMEM register clear mask */ -#define PMEM4_CLEAR_MASK ((uint32_t)(FMC_PMEM4_MEMSET4 | FMC_PMEM4_MEMWAIT4 |\ - FMC_PMEM4_MEMHOLD4 | FMC_PMEM4_MEMHIZ4)) - -/* --- PATT Register ---*/ -/* PATT register clear mask */ -#define PATT4_CLEAR_MASK ((uint32_t)(FMC_PATT4_ATTSET4 | FMC_PATT4_ATTWAIT4 |\ - FMC_PATT4_ATTHOLD4 | FMC_PATT4_ATTHIZ4)) - -/* --- PIO4 Register ---*/ -/* PIO4 register clear mask */ -#define PIO4_CLEAR_MASK ((uint32_t)(FMC_PIO4_IOSET4 | FMC_PIO4_IOWAIT4 | \ - FMC_PIO4_IOHOLD4 | FMC_PIO4_IOHIZ4)) - -#endif /* FMC_Bank4 */ -#if defined(FMC_Bank5_6) - -/* --- SDCR Register ---*/ -/* SDCR register clear mask */ -#define SDCR_CLEAR_MASK ((uint32_t)(FMC_SDCR1_NC | FMC_SDCR1_NR | \ - FMC_SDCR1_MWID | FMC_SDCR1_NB | \ - FMC_SDCR1_CAS | FMC_SDCR1_WP | \ - FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | \ - FMC_SDCR1_RPIPE)) - -/* --- SDTR Register ---*/ -/* SDTR register clear mask */ -#define SDTR_CLEAR_MASK ((uint32_t)(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | \ - FMC_SDTR1_TRAS | FMC_SDTR1_TRC | \ - FMC_SDTR1_TWR | FMC_SDTR1_TRP | \ - FMC_SDTR1_TRCD)) -#endif /* FMC_Bank5_6 */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions - * @{ - */ - -#if defined(FMC_Bank1) - -/** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions - * @brief NORSRAM Controller functions - * - @verbatim - ============================================================================== - ##### How to use NORSRAM device driver ##### - ============================================================================== - - [..] - This driver contains a set of APIs to interface with the FMC NORSRAM banks in order - to run the NORSRAM external devices. - - (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit() - (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init() - (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init() - (+) FMC NORSRAM bank extended timing configuration using the function - FMC_NORSRAM_Extended_Timing_Init() - (+) FMC NORSRAM bank enable/disable write operation using the functions - FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable() - -@endverbatim - * @{ - */ - -/** @defgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC NORSRAM interface - (+) De-initialize the FMC NORSRAM interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the FMC_NORSRAM device according to the specified - * control parameters in the FMC_NORSRAM_InitTypeDef - * @param Device Pointer to NORSRAM device instance - * @param Init Pointer to NORSRAM Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, - FMC_NORSRAM_InitTypeDef *Init) -{ - uint32_t flashaccess; - uint32_t btcr_reg; - uint32_t mask; - - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank)); - assert_param(IS_FMC_MUX(Init->DataAddressMux)); - assert_param(IS_FMC_MEMORY(Init->MemoryType)); - assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode)); - assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity)); -#if defined(FMC_BCR1_WRAPMOD) - assert_param(IS_FMC_WRAP_MODE(Init->WrapMode)); -#endif /* FMC_BCR1_WRAPMOD */ - assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); - assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation)); - assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal)); - assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode)); - assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait)); - assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst)); -#if defined(FMC_BCR1_CCLKEN) - assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); -#endif -#if defined(FMC_BCR1_WFDIS) - assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo)); -#endif /* FMC_BCR1_WFDIS */ - assert_param(IS_FMC_PAGESIZE(Init->PageSize)); - - /* Disable NORSRAM Device */ - __FMC_NORSRAM_DISABLE(Device, Init->NSBank); - - /* Set NORSRAM device control parameters */ - if (Init->MemoryType == FMC_MEMORY_TYPE_NOR) - { - flashaccess = FMC_NORSRAM_FLASH_ACCESS_ENABLE; - } - else - { - flashaccess = FMC_NORSRAM_FLASH_ACCESS_DISABLE; - } - - btcr_reg = (flashaccess | \ - Init->DataAddressMux | \ - Init->MemoryType | \ - Init->MemoryDataWidth | \ - Init->BurstAccessMode | \ - Init->WaitSignalPolarity | \ - Init->WaitSignalActive | \ - Init->WriteOperation | \ - Init->WaitSignal | \ - Init->ExtendedMode | \ - Init->AsynchronousWait | \ - Init->WriteBurst); - -#if defined(FMC_BCR1_WRAPMOD) - btcr_reg |= Init->WrapMode; -#endif /* FMC_BCR1_WRAPMOD */ -#if defined(FMC_BCR1_CCLKEN) - btcr_reg |= Init->ContinuousClock; -#endif /* FMC_BCR1_CCLKEN */ -#if defined(FMC_BCR1_WFDIS) - btcr_reg |= Init->WriteFifo; -#endif /* FMC_BCR1_WFDIS */ - btcr_reg |= Init->PageSize; - - mask = (FMC_BCR1_MBKEN | - FMC_BCR1_MUXEN | - FMC_BCR1_MTYP | - FMC_BCR1_MWID | - FMC_BCR1_FACCEN | - FMC_BCR1_BURSTEN | - FMC_BCR1_WAITPOL | - FMC_BCR1_WAITCFG | - FMC_BCR1_WREN | - FMC_BCR1_WAITEN | - FMC_BCR1_EXTMOD | - FMC_BCR1_ASYNCWAIT | - FMC_BCR1_CBURSTRW); - -#if defined(FMC_BCR1_WRAPMOD) - mask |= FMC_BCR1_WRAPMOD; -#endif /* FMC_BCR1_WRAPMOD */ -#if defined(FMC_BCR1_CCLKEN) - mask |= FMC_BCR1_CCLKEN; -#endif -#if defined(FMC_BCR1_WFDIS) - mask |= FMC_BCR1_WFDIS; -#endif /* FMC_BCR1_WFDIS */ - mask |= FMC_BCR1_CPSIZE; - - MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg); - -#if defined(FMC_BCR1_CCLKEN) - /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ - if ((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1)) - { - MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN, Init->ContinuousClock); - } -#endif -#if defined(FMC_BCR1_WFDIS) - - if (Init->NSBank != FMC_NORSRAM_BANK1) - { - /* Configure Write FIFO mode when Write Fifo is enabled for bank2..4 */ - SET_BIT(Device->BTCR[FMC_NORSRAM_BANK1], (uint32_t)(Init->WriteFifo)); - } -#endif /* FMC_BCR1_WFDIS */ - - return HAL_OK; -} - -/** - * @brief DeInitialize the FMC_NORSRAM peripheral - * @param Device Pointer to NORSRAM device instance - * @param ExDevice Pointer to NORSRAM extended mode device instance - * @param Bank NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, - FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Disable the FMC_NORSRAM device */ - __FMC_NORSRAM_DISABLE(Device, Bank); - - /* De-initialize the FMC_NORSRAM device */ - /* FMC_NORSRAM_BANK1 */ - if (Bank == FMC_NORSRAM_BANK1) - { - Device->BTCR[Bank] = 0x000030DBU; - } - /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */ - else - { - Device->BTCR[Bank] = 0x000030D2U; - } - - Device->BTCR[Bank + 1U] = 0x0FFFFFFFU; - ExDevice->BWTR[Bank] = 0x0FFFFFFFU; - - return HAL_OK; -} - -/** - * @brief Initialize the FMC_NORSRAM Timing according to the specified - * parameters in the FMC_NORSRAM_TimingTypeDef - * @param Device Pointer to NORSRAM device instance - * @param Timing Pointer to NORSRAM Timing structure - * @param Bank NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, - FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) -{ -#if defined(FMC_BCR1_CCLKEN) - uint32_t tmpr; -#endif - - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); - assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); - assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); - assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); - assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision)); - assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency)); - assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Set FMC_NORSRAM device timing parameters */ - MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime | - ((Timing->AddressHoldTime) << FMC_BTR1_ADDHLD_Pos) | - ((Timing->DataSetupTime) << FMC_BTR1_DATAST_Pos) | - ((Timing->BusTurnAroundDuration) << FMC_BTR1_BUSTURN_Pos) | - (((Timing->CLKDivision) - 1U) << FMC_BTR1_CLKDIV_Pos) | - (((Timing->DataLatency) - 2U) << FMC_BTR1_DATLAT_Pos) | - (Timing->AccessMode))); - -#if defined(FMC_BCR1_CCLKEN) - /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ - if (HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN)) - { - tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FMC_BTR1_CLKDIV_Pos)); - tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FMC_BTR1_CLKDIV_Pos); - MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1 + 1U], FMC_BTR1_CLKDIV, tmpr); - } - -#endif - return HAL_OK; -} - -/** - * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified - * parameters in the FMC_NORSRAM_TimingTypeDef - * @param Device Pointer to NORSRAM device instance - * @param Timing Pointer to NORSRAM Timing structure - * @param Bank NORSRAM bank number - * @param ExtendedMode FMC Extended Mode - * This parameter can be one of the following values: - * @arg FMC_EXTENDED_MODE_DISABLE - * @arg FMC_EXTENDED_MODE_ENABLE - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, - FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, - uint32_t ExtendedMode) -{ - /* Check the parameters */ - assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode)); - - /* Set NORSRAM device timing register for write configuration, if extended mode is used */ - if (ExtendedMode == FMC_EXTENDED_MODE_ENABLE) - { - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device)); - assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); - assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); - assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); - assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); - assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Set NORSRAM device timing register for write configuration, if extended mode is used */ - MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | - ((Timing->AddressHoldTime) << FMC_BWTR1_ADDHLD_Pos) | - ((Timing->DataSetupTime) << FMC_BWTR1_DATAST_Pos) | - Timing->AccessMode | - ((Timing->BusTurnAroundDuration) << FMC_BWTR1_BUSTURN_Pos))); - } - else - { - Device->BWTR[Bank] = 0x0FFFFFFFU; - } - - return HAL_OK; -} -/** - * @} - */ - -/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_NORSRAM Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC NORSRAM interface. - -@endverbatim - * @{ - */ - -/** - * @brief Enables dynamically FMC_NORSRAM write operation. - * @param Device Pointer to NORSRAM device instance - * @param Bank NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Enable write operation */ - SET_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NORSRAM write operation. - * @param Device Pointer to NORSRAM device instance - * @param Bank NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Disable write operation */ - CLEAR_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ -#endif /* FMC_Bank1 */ - -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) - -/** @defgroup FMC_LL_Exported_Functions_NAND FMC Low Layer NAND Exported Functions - * @brief NAND Controller functions - * - @verbatim - ============================================================================== - ##### How to use NAND device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FMC NAND banks in order - to run the NAND external devices. - - (+) FMC NAND bank reset using the function FMC_NAND_DeInit() - (+) FMC NAND bank control configuration using the function FMC_NAND_Init() - (+) FMC NAND bank common space timing configuration using the function - FMC_NAND_CommonSpace_Timing_Init() - (+) FMC NAND bank attribute space timing configuration using the function - FMC_NAND_AttributeSpace_Timing_Init() - (+) FMC NAND bank enable/disable ECC correction feature using the functions - FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable() - (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC() - -@endverbatim - * @{ - */ - -/** @defgroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC NAND interface - (+) De-initialize the FMC NAND interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMC_NAND device according to the specified - * control parameters in the FMC_NAND_HandleTypeDef - * @param Device Pointer to NAND device instance - * @param Init Pointer to NAND Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Init->NandBank)); - assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_ECC_STATE(Init->EccComputation)); - assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize)); - assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); - -#if defined(FMC_Bank2_3) - /* Set NAND device control parameters */ - if (Init->NandBank == FMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature | - FMC_PCR_MEMORY_TYPE_NAND | - Init->MemoryDataWidth | - Init->EccComputation | - Init->ECCPageSize | - ((Init->TCLRSetupTime) << FMC_PCR2_TCLR_Pos) | - ((Init->TARSetupTime) << FMC_PCR2_TAR_Pos))); - } - else - { - /* NAND bank 3 registers configuration */ - MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature | - FMC_PCR_MEMORY_TYPE_NAND | - Init->MemoryDataWidth | - Init->EccComputation | - Init->ECCPageSize | - ((Init->TCLRSetupTime) << FMC_PCR2_TCLR_Pos) | - ((Init->TARSetupTime) << FMC_PCR2_TAR_Pos))); - } -#else - /* NAND bank 3 registers configuration */ - MODIFY_REG(Device->PCR, PCR_CLEAR_MASK, (Init->Waitfeature | - FMC_PCR_MEMORY_TYPE_NAND | - Init->MemoryDataWidth | - Init->EccComputation | - Init->ECCPageSize | - ((Init->TCLRSetupTime) << FMC_PCR_TCLR_Pos) | - ((Init->TARSetupTime) << FMC_PCR_TAR_Pos))); -#endif - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_NAND Common space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device Pointer to NAND device instance - * @param Timing Pointer to NAND timing structure - * @param Bank NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - assert_param(IS_FMC_NAND_BANK(Bank)); - -#if defined(FMC_Bank2_3) - /* Set FMC_NAND device timing parameters */ - if (Bank == FMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PMEM2_MEMWAIT2_Pos) | - ((Timing->HoldSetupTime) << FMC_PMEM2_MEMHOLD2_Pos) | - ((Timing->HiZSetupTime) << FMC_PMEM2_MEMHIZ2_Pos))); - } - else - { - /* NAND bank 3 registers configuration */ - MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PMEM2_MEMWAIT2_Pos) | - ((Timing->HoldSetupTime) << FMC_PMEM2_MEMHOLD2_Pos) | - ((Timing->HiZSetupTime) << FMC_PMEM2_MEMHIZ2_Pos))); - } -#else - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(Bank); - - /* NAND bank 3 registers configuration */ - MODIFY_REG(Device->PMEM, PMEM_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PMEM_MEMWAIT2_Pos) | - ((Timing->HoldSetupTime) << FMC_PMEM_MEMHOLD2_Pos) | - ((Timing->HiZSetupTime) << FMC_PMEM_MEMHIZ2_Pos))); -#endif - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_NAND Attribute space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device Pointer to NAND device instance - * @param Timing Pointer to NAND timing structure - * @param Bank NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - assert_param(IS_FMC_NAND_BANK(Bank)); - -#if defined(FMC_Bank2_3) - /* Set FMC_NAND device timing parameters */ - if (Bank == FMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PATT2_ATTWAIT2_Pos) | - ((Timing->HoldSetupTime) << FMC_PATT2_ATTHOLD2_Pos) | - ((Timing->HiZSetupTime) << FMC_PATT2_ATTHIZ2_Pos))); - } - else - { - /* NAND bank 3 registers configuration */ - MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PATT2_ATTWAIT2_Pos) | - ((Timing->HoldSetupTime) << FMC_PATT2_ATTHOLD2_Pos) | - ((Timing->HiZSetupTime) << FMC_PATT2_ATTHIZ2_Pos))); - } -#else - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(Bank); - - /* NAND bank 3 registers configuration */ - MODIFY_REG(Device->PATT, PATT_CLEAR_MASK, (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PATT_ATTWAIT2_Pos) | - ((Timing->HoldSetupTime) << FMC_PATT_ATTHOLD2_Pos) | - ((Timing->HiZSetupTime) << FMC_PATT_ATTHIZ2_Pos))); -#endif - - return HAL_OK; -} - -/** - * @brief DeInitializes the FMC_NAND device - * @param Device Pointer to NAND device instance - * @param Bank NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Disable the NAND Bank */ - __FMC_NAND_DISABLE(Device, Bank); - - /* De-initialize the NAND Bank */ -#if defined(FMC_Bank2_3) - if (Bank == FMC_NAND_BANK2) - { - /* Set the FMC_NAND_BANK2 registers to their reset values */ - WRITE_REG(Device->PCR2, 0x00000018U); - WRITE_REG(Device->SR2, 0x00000040U); - WRITE_REG(Device->PMEM2, 0xFCFCFCFCU); - WRITE_REG(Device->PATT2, 0xFCFCFCFCU); - } - /* FMC_Bank3_NAND */ - else - { - /* Set the FMC_NAND_BANK3 registers to their reset values */ - WRITE_REG(Device->PCR3, 0x00000018U); - WRITE_REG(Device->SR3, 0x00000040U); - WRITE_REG(Device->PMEM3, 0xFCFCFCFCU); - WRITE_REG(Device->PATT3, 0xFCFCFCFCU); - } -#else - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(Bank); - - /* Set the FMC_NAND_BANK3 registers to their reset values */ - WRITE_REG(Device->PCR, 0x00000018U); - WRITE_REG(Device->SR, 0x00000040U); - WRITE_REG(Device->PMEM, 0xFCFCFCFCU); - WRITE_REG(Device->PATT, 0xFCFCFCFCU); -#endif - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup HAL_FMC_NAND_Group2 Peripheral Control functions - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_NAND Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC NAND interface. - -@endverbatim - * @{ - */ - - -/** - * @brief Enables dynamically FMC_NAND ECC feature. - * @param Device Pointer to NAND device instance - * @param Bank NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Enable ECC feature */ -#if defined(FMC_Bank2_3) - if (Bank == FMC_NAND_BANK2) - { - SET_BIT(Device->PCR2, FMC_PCR2_ECCEN); - } - else - { - SET_BIT(Device->PCR3, FMC_PCR2_ECCEN); - } -#else - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(Bank); - - SET_BIT(Device->PCR, FMC_PCR_ECCEN); -#endif - - return HAL_OK; -} - - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param Device Pointer to NAND device instance - * @param Bank NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Disable ECC feature */ -#if defined(FMC_Bank2_3) - if (Bank == FMC_NAND_BANK2) - { - CLEAR_BIT(Device->PCR2, FMC_PCR2_ECCEN); - } - else - { - CLEAR_BIT(Device->PCR3, FMC_PCR2_ECCEN); - } -#else - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(Bank); - - CLEAR_BIT(Device->PCR, FMC_PCR_ECCEN); -#endif - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param Device Pointer to NAND device instance - * @param ECCval Pointer to ECC value - * @param Bank NAND bank number - * @param Timeout Timeout wait value - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, - uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until FIFO is empty */ - while (__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - return HAL_TIMEOUT; - } - } - } - -#if defined(FMC_Bank2_3) - if (Bank == FMC_NAND_BANK2) - { - /* Get the ECCR2 register value */ - *ECCval = (uint32_t)Device->ECCR2; - } - else - { - /* Get the ECCR3 register value */ - *ECCval = (uint32_t)Device->ECCR3; - } -#else - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(Bank); - - /* Get the ECCR register value */ - *ECCval = (uint32_t)Device->ECCR; -#endif - - return HAL_OK; -} - -/** - * @} - */ -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - -#if defined(FMC_Bank4) - -/** @addtogroup FMC_LL_PCCARD - * @brief PCCARD Controller functions - * - @verbatim - ============================================================================== - ##### How to use PCCARD device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FMC PCCARD bank in order - to run the PCCARD/compact flash external devices. - - (+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit() - (+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init() - (+) FMC PCCARD bank common space timing configuration using the function - FMC_PCCARD_CommonSpace_Timing_Init() - (+) FMC PCCARD bank attribute space timing configuration using the function - FMC_PCCARD_AttributeSpace_Timing_Init() - (+) FMC PCCARD bank IO space timing configuration using the function - FMC_PCCARD_IOSpace_Timing_Init() -@endverbatim - * @{ - */ - -/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC PCCARD interface - (+) De-initialize the FMC PCCARD interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMC_PCCARD device according to the specified - * control parameters in the FMC_PCCARD_HandleTypeDef - * @param Device Pointer to PCCARD device instance - * @param Init Pointer to PCCARD Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init) -{ - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) - assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - - /* Set FMC_PCCARD device control parameters */ - MODIFY_REG(Device->PCR4, - (FMC_PCR4_PTYP | - FMC_PCR4_PWAITEN | - FMC_PCR4_PWID | - FMC_PCR4_TCLR | - FMC_PCR4_TAR), - (FMC_PCR_MEMORY_TYPE_PCCARD | - Init->Waitfeature | - FMC_NAND_PCC_MEM_BUS_WIDTH_16 | - (Init->TCLRSetupTime << FMC_PCR4_TCLR_Pos) | - (Init->TARSetupTime << FMC_PCR4_TAR_Pos))); - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_PCCARD Common space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device Pointer to PCCARD device instance - * @param Timing Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing) -{ - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - - /* Set PCCARD timing parameters */ - MODIFY_REG(Device->PMEM4, PMEM4_CLEAR_MASK, - (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PMEM4_MEMWAIT4_Pos) | - ((Timing->HoldSetupTime) << FMC_PMEM4_MEMHOLD4_Pos) | - ((Timing->HiZSetupTime) << FMC_PMEM4_MEMHIZ4_Pos))); - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_PCCARD Attribute space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device Pointer to PCCARD device instance - * @param Timing Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing) -{ - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - - /* Set PCCARD timing parameters */ - MODIFY_REG(Device->PATT4, PATT4_CLEAR_MASK, - (Timing->SetupTime | - ((Timing->WaitSetupTime) << FMC_PATT4_ATTWAIT4_Pos) | - ((Timing->HoldSetupTime) << FMC_PATT4_ATTHOLD4_Pos) | - ((Timing->HiZSetupTime) << FMC_PATT4_ATTHIZ4_Pos))); - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_PCCARD IO space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device Pointer to PCCARD device instance - * @param Timing Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, - FMC_NAND_PCC_TimingTypeDef *Timing) -{ - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); -#if defined(FMC_Bank3) || defined(FMC_Bank2_3) - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); -#endif /* FMC_Bank3) || defined(FMC_Bank2_3 */ - - /* Set FMC_PCCARD device timing parameters */ - MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK, - (Timing->SetupTime | - (Timing->WaitSetupTime << FMC_PIO4_IOWAIT4_Pos) | - (Timing->HoldSetupTime << FMC_PIO4_IOHOLD4_Pos) | - (Timing->HiZSetupTime << FMC_PIO4_IOHIZ4_Pos))); - - return HAL_OK; -} - -/** - * @brief DeInitializes the FMC_PCCARD device - * @param Device Pointer to PCCARD device instance - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device) -{ - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); - - /* Disable the FMC_PCCARD device */ - __FMC_PCCARD_DISABLE(Device); - - /* De-initialize the FMC_PCCARD device */ - Device->PCR4 = 0x00000018U; - Device->SR4 = 0x00000040U; - Device->PMEM4 = 0xFCFCFCFCU; - Device->PATT4 = 0xFCFCFCFCU; - Device->PIO4 = 0xFCFCFCFCU; - - return HAL_OK; -} - -/** - * @} - */ -#endif /* FMC_Bank4 */ - -#if defined(FMC_Bank5_6) - -/** @defgroup FMC_LL_SDRAM - * @brief SDRAM Controller functions - * - @verbatim - ============================================================================== - ##### How to use SDRAM device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FMC SDRAM banks in order - to run the SDRAM external devices. - - (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit() - (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init() - (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init() - (+) FMC SDRAM bank enable/disable write operation using the functions - FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable() - (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand() - -@endverbatim - * @{ - */ - -/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC SDRAM interface - (+) De-initialize the FMC SDRAM interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMC_SDRAM device according to the specified - * control parameters in the FMC_SDRAM_InitTypeDef - * @param Device Pointer to SDRAM device instance - * @param Init Pointer to SDRAM Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Init->SDBank)); - assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber)); - assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber)); - assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber)); - assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency)); - assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection)); - assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod)); - assert_param(IS_FMC_READ_BURST(Init->ReadBurst)); - assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay)); - - /* Set SDRAM bank configuration parameters */ - if (Init->SDBank == FMC_SDRAM_BANK1) - { - MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK1], - SDCR_CLEAR_MASK, - (Init->ColumnBitsNumber | - Init->RowBitsNumber | - Init->MemoryDataWidth | - Init->InternalBankNumber | - Init->CASLatency | - Init->WriteProtection | - Init->SDClockPeriod | - Init->ReadBurst | - Init->ReadPipeDelay)); - } - else /* FMC_Bank2_SDRAM */ - { - MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK1], - FMC_SDCR1_SDCLK | - FMC_SDCR1_RBURST | - FMC_SDCR1_RPIPE, - (Init->SDClockPeriod | - Init->ReadBurst | - Init->ReadPipeDelay)); - - MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK2], - SDCR_CLEAR_MASK, - (Init->ColumnBitsNumber | - Init->RowBitsNumber | - Init->MemoryDataWidth | - Init->InternalBankNumber | - Init->CASLatency | - Init->WriteProtection)); - } - - return HAL_OK; -} - - -/** - * @brief Initializes the FMC_SDRAM device timing according to the specified - * parameters in the FMC_SDRAM_TimingTypeDef - * @param Device Pointer to SDRAM device instance - * @param Timing Pointer to SDRAM Timing structure - * @param Bank SDRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, - FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay)); - assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay)); - assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime)); - assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay)); - assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime)); - assert_param(IS_FMC_RP_DELAY(Timing->RPDelay)); - assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Set SDRAM device timing parameters */ - if (Bank == FMC_SDRAM_BANK1) - { - MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK1], - SDTR_CLEAR_MASK, - (((Timing->LoadToActiveDelay) - 1U) | - (((Timing->ExitSelfRefreshDelay) - 1U) << FMC_SDTR1_TXSR_Pos) | - (((Timing->SelfRefreshTime) - 1U) << FMC_SDTR1_TRAS_Pos) | - (((Timing->RowCycleDelay) - 1U) << FMC_SDTR1_TRC_Pos) | - (((Timing->WriteRecoveryTime) - 1U) << FMC_SDTR1_TWR_Pos) | - (((Timing->RPDelay) - 1U) << FMC_SDTR1_TRP_Pos) | - (((Timing->RCDDelay) - 1U) << FMC_SDTR1_TRCD_Pos))); - } - else /* FMC_Bank2_SDRAM */ - { - MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK1], - FMC_SDTR1_TRC | - FMC_SDTR1_TRP, - (((Timing->RowCycleDelay) - 1U) << FMC_SDTR1_TRC_Pos) | - (((Timing->RPDelay) - 1U) << FMC_SDTR1_TRP_Pos)); - - MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK2], - SDTR_CLEAR_MASK, - (((Timing->LoadToActiveDelay) - 1U) | - (((Timing->ExitSelfRefreshDelay) - 1U) << FMC_SDTR1_TXSR_Pos) | - (((Timing->SelfRefreshTime) - 1U) << FMC_SDTR1_TRAS_Pos) | - (((Timing->WriteRecoveryTime) - 1U) << FMC_SDTR1_TWR_Pos) | - (((Timing->RCDDelay) - 1U) << FMC_SDTR1_TRCD_Pos))); - } - - return HAL_OK; -} - -/** - * @brief DeInitializes the FMC_SDRAM peripheral - * @param Device Pointer to SDRAM device instance - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* De-initialize the SDRAM device */ - Device->SDCR[Bank] = 0x000002D0U; - Device->SDTR[Bank] = 0x0FFFFFFFU; - Device->SDCMR = 0x00000000U; - Device->SDRTR = 0x00000000U; - Device->SDSR = 0x00000000U; - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_SDRAM Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC SDRAM interface. - -@endverbatim - * @{ - */ - -/** - * @brief Enables dynamically FMC_SDRAM write protection. - * @param Device Pointer to SDRAM device instance - * @param Bank SDRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Enable write protection */ - SET_BIT(Device->SDCR[Bank], FMC_SDRAM_WRITE_PROTECTION_ENABLE); - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_SDRAM write protection. - * @param hsdram FMC_SDRAM handle - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Disable write protection */ - CLEAR_BIT(Device->SDCR[Bank], FMC_SDRAM_WRITE_PROTECTION_ENABLE); - - return HAL_OK; -} - -/** - * @brief Send Command to the FMC SDRAM bank - * @param Device Pointer to SDRAM device instance - * @param Command Pointer to SDRAM command structure - * @param Timing Pointer to SDRAM Timing structure - * @param Timeout Timeout wait value - * @retval HAL state - */ -HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, - FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout) -{ - uint32_t tickstart = 0U; - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode)); - assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget)); - assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber)); - assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition)); - - /* Set command register */ - MODIFY_REG(Device->SDCMR, (FMC_SDCMR_MODE | FMC_SDCMR_CTB2 | FMC_SDCMR_CTB1 | FMC_SDCMR_NRFS | FMC_SDCMR_MRD), - ((Command->CommandMode) | (Command->CommandTarget) | - (((Command->AutoRefreshNumber) - 1U) << FMC_SDCMR_NRFS_Pos) | - ((Command->ModeRegisterDefinition) << FMC_SDCMR_MRD_Pos))); - /* Get tick */ - tickstart = HAL_GetTick(); - - /* wait until command is send */ - while (HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @brief Program the SDRAM Memory Refresh rate. - * @param Device Pointer to SDRAM device instance - * @param RefreshRate The SDRAM refresh rate value. - * @retval HAL state - */ -HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_REFRESH_RATE(RefreshRate)); - - /* Set the refresh rate in command register */ - MODIFY_REG(Device->SDRTR, FMC_SDRTR_COUNT, (RefreshRate << FMC_SDRTR_COUNT_Pos)); - - return HAL_OK; -} - -/** - * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands. - * @param Device Pointer to SDRAM device instance - * @param AutoRefreshNumber Specifies the auto Refresh number. - * @retval None - */ -HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, - uint32_t AutoRefreshNumber) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber)); - - /* Set the Auto-refresh number in command register */ - MODIFY_REG(Device->SDCMR, FMC_SDCMR_NRFS, ((AutoRefreshNumber - 1U) << FMC_SDCMR_NRFS_Pos)); - - return HAL_OK; -} - -/** - * @brief Returns the indicated FMC SDRAM bank mode status. - * @param Device Pointer to SDRAM device instance - * @param Bank Defines the FMC SDRAM bank. This parameter can be - * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. - * @retval The FMC SDRAM bank mode status, could be on of the following values: - * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or - * FMC_SDRAM_POWER_DOWN_MODE. - */ -uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Get the corresponding bank mode */ - if (Bank == FMC_SDRAM_BANK1) - { - tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1); - } - else - { - tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2U); - } - - /* Return the mode status */ - return tmpreg; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMC_Bank5_6 */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_NOR_MODULE_ENABLED */ -/** - * @} - */ -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmpi2c.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmpi2c.c deleted file mode 100644 index 04966ea..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmpi2c.c +++ /dev/null @@ -1,217 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fmpi2c.c - * @author MCD Application Team - * @brief FMPI2C LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -#if defined(FMPI2C_CR1_PE) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_fmpi2c.h" -#include "stm32f4xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (FMPI2C1) - -/** @defgroup FMPI2C_LL FMPI2C - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup FMPI2C_LL_Private_Macros - * @{ - */ - -#define IS_LL_FMPI2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_FMPI2C_MODE_I2C) || \ - ((__VALUE__) == LL_FMPI2C_MODE_SMBUS_HOST) || \ - ((__VALUE__) == LL_FMPI2C_MODE_SMBUS_DEVICE) || \ - ((__VALUE__) == LL_FMPI2C_MODE_SMBUS_DEVICE_ARP)) - -#define IS_LL_FMPI2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_FMPI2C_ANALOGFILTER_ENABLE) || \ - ((__VALUE__) == LL_FMPI2C_ANALOGFILTER_DISABLE)) - -#define IS_LL_FMPI2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU) - -#define IS_LL_FMPI2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU) - -#define IS_LL_FMPI2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_FMPI2C_ACK) || \ - ((__VALUE__) == LL_FMPI2C_NACK)) - -#define IS_LL_FMPI2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_FMPI2C_OWNADDRESS1_7BIT) || \ - ((__VALUE__) == LL_FMPI2C_OWNADDRESS1_10BIT)) -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPI2C_LL_Exported_Functions - * @{ - */ - -/** @addtogroup FMPI2C_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the FMPI2C registers to their default reset values. - * @param FMPI2Cx FMPI2C Instance. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: FMPI2C registers are de-initialized - * - ERROR: FMPI2C registers are not de-initialized - */ -ErrorStatus LL_FMPI2C_DeInit(FMPI2C_TypeDef *FMPI2Cx) -{ - ErrorStatus status = SUCCESS; - - /* Check the FMPI2C Instance FMPI2Cx */ - assert_param(IS_FMPI2C_ALL_INSTANCE(FMPI2Cx)); - - if (FMPI2Cx == FMPI2C1) - { - /* Force reset of FMPI2C clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_FMPI2C1); - - /* Release reset of FMPI2C clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_FMPI2C1); - } - else - { - status = ERROR; - } - - return status; -} - -/** - * @brief Initialize the FMPI2C registers according to the specified parameters in FMPI2C_InitStruct. - * @param FMPI2Cx FMPI2C Instance. - * @param FMPI2C_InitStruct pointer to a @ref LL_FMPI2C_InitTypeDef structure. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: FMPI2C registers are initialized - * - ERROR: Not applicable - */ -ErrorStatus LL_FMPI2C_Init(FMPI2C_TypeDef *FMPI2Cx, LL_FMPI2C_InitTypeDef *FMPI2C_InitStruct) -{ - /* Check the FMPI2C Instance FMPI2Cx */ - assert_param(IS_FMPI2C_ALL_INSTANCE(FMPI2Cx)); - - /* Check the FMPI2C parameters from FMPI2C_InitStruct */ - assert_param(IS_LL_FMPI2C_PERIPHERAL_MODE(FMPI2C_InitStruct->PeripheralMode)); - assert_param(IS_LL_FMPI2C_ANALOG_FILTER(FMPI2C_InitStruct->AnalogFilter)); - assert_param(IS_LL_FMPI2C_DIGITAL_FILTER(FMPI2C_InitStruct->DigitalFilter)); - assert_param(IS_LL_FMPI2C_OWN_ADDRESS1(FMPI2C_InitStruct->OwnAddress1)); - assert_param(IS_LL_FMPI2C_TYPE_ACKNOWLEDGE(FMPI2C_InitStruct->TypeAcknowledge)); - assert_param(IS_LL_FMPI2C_OWN_ADDRSIZE(FMPI2C_InitStruct->OwnAddrSize)); - - /* Disable the selected FMPI2Cx Peripheral */ - LL_FMPI2C_Disable(FMPI2Cx); - - /*---------------------------- FMPI2Cx CR1 Configuration ------------------------ - * Configure the analog and digital noise filters with parameters : - * - AnalogFilter: FMPI2C_CR1_ANFOFF bit - * - DigitalFilter: FMPI2C_CR1_DNF[3:0] bits - */ - LL_FMPI2C_ConfigFilters(FMPI2Cx, FMPI2C_InitStruct->AnalogFilter, FMPI2C_InitStruct->DigitalFilter); - - /*---------------------------- FMPI2Cx TIMINGR Configuration -------------------- - * Configure the SDA setup, hold time and the SCL high, low period with parameter : - * - Timing: FMPI2C_TIMINGR_PRESC[3:0], FMPI2C_TIMINGR_SCLDEL[3:0], FMPI2C_TIMINGR_SDADEL[3:0], - * FMPI2C_TIMINGR_SCLH[7:0] and FMPI2C_TIMINGR_SCLL[7:0] bits - */ - LL_FMPI2C_SetTiming(FMPI2Cx, FMPI2C_InitStruct->Timing); - - /* Enable the selected FMPI2Cx Peripheral */ - LL_FMPI2C_Enable(FMPI2Cx); - - /*---------------------------- FMPI2Cx OAR1 Configuration ----------------------- - * Disable, Configure and Enable FMPI2Cx device own address 1 with parameters : - * - OwnAddress1: FMPI2C_OAR1_OA1[9:0] bits - * - OwnAddrSize: FMPI2C_OAR1_OA1MODE bit - */ - LL_FMPI2C_DisableOwnAddress1(FMPI2Cx); - LL_FMPI2C_SetOwnAddress1(FMPI2Cx, FMPI2C_InitStruct->OwnAddress1, FMPI2C_InitStruct->OwnAddrSize); - - /* OwnAdress1 == 0 is reserved for General Call address */ - if (FMPI2C_InitStruct->OwnAddress1 != 0U) - { - LL_FMPI2C_EnableOwnAddress1(FMPI2Cx); - } - - /*---------------------------- FMPI2Cx MODE Configuration ----------------------- - * Configure FMPI2Cx peripheral mode with parameter : - * - PeripheralMode: FMPI2C_CR1_SMBDEN and FMPI2C_CR1_SMBHEN bits - */ - LL_FMPI2C_SetMode(FMPI2Cx, FMPI2C_InitStruct->PeripheralMode); - - /*---------------------------- FMPI2Cx CR2 Configuration ------------------------ - * Configure the ACKnowledge or Non ACKnowledge condition - * after the address receive match code or next received byte with parameter : - * - TypeAcknowledge: FMPI2C_CR2_NACK bit - */ - LL_FMPI2C_AcknowledgeNextData(FMPI2Cx, FMPI2C_InitStruct->TypeAcknowledge); - - return SUCCESS; -} - -/** - * @brief Set each @ref LL_FMPI2C_InitTypeDef field to default value. - * @param FMPI2C_InitStruct Pointer to a @ref LL_FMPI2C_InitTypeDef structure. - * @retval None - */ -void LL_FMPI2C_StructInit(LL_FMPI2C_InitTypeDef *FMPI2C_InitStruct) -{ - /* Set FMPI2C_InitStruct fields to default values */ - FMPI2C_InitStruct->PeripheralMode = LL_FMPI2C_MODE_I2C; - FMPI2C_InitStruct->Timing = 0U; - FMPI2C_InitStruct->AnalogFilter = LL_FMPI2C_ANALOGFILTER_ENABLE; - FMPI2C_InitStruct->DigitalFilter = 0U; - FMPI2C_InitStruct->OwnAddress1 = 0U; - FMPI2C_InitStruct->TypeAcknowledge = LL_FMPI2C_NACK; - FMPI2C_InitStruct->OwnAddrSize = LL_FMPI2C_OWNADDRESS1_7BIT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* FMPI2C1 */ - -/** - * @} - */ - -#endif /* FMPI2C_CR1_PE */ -#endif /* USE_FULL_LL_DRIVER */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c deleted file mode 100644 index 4d100b5..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c +++ /dev/null @@ -1,303 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_gpio.c - * @author MCD Application Team - * @brief GPIO LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_gpio.h" -#include "stm32f4xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) - -/** @addtogroup GPIO_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup GPIO_LL_Private_Macros - * @{ - */ -#define IS_LL_GPIO_PIN(__VALUE__) (((0x00000000U) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) - -#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ - ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ - ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ - ((__VALUE__) == LL_GPIO_MODE_ANALOG)) - -#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ - ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) - -#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH)) - -#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ - ((__VALUE__) == LL_GPIO_PULL_UP) ||\ - ((__VALUE__) == LL_GPIO_PULL_DOWN)) - -#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ - ((__VALUE__) == LL_GPIO_AF_1 ) ||\ - ((__VALUE__) == LL_GPIO_AF_2 ) ||\ - ((__VALUE__) == LL_GPIO_AF_3 ) ||\ - ((__VALUE__) == LL_GPIO_AF_4 ) ||\ - ((__VALUE__) == LL_GPIO_AF_5 ) ||\ - ((__VALUE__) == LL_GPIO_AF_6 ) ||\ - ((__VALUE__) == LL_GPIO_AF_7 ) ||\ - ((__VALUE__) == LL_GPIO_AF_8 ) ||\ - ((__VALUE__) == LL_GPIO_AF_9 ) ||\ - ((__VALUE__) == LL_GPIO_AF_10 ) ||\ - ((__VALUE__) == LL_GPIO_AF_11 ) ||\ - ((__VALUE__) == LL_GPIO_AF_12 ) ||\ - ((__VALUE__) == LL_GPIO_AF_13 ) ||\ - ((__VALUE__) == LL_GPIO_AF_14 ) ||\ - ((__VALUE__) == LL_GPIO_AF_15 )) -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_LL_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize GPIO registers (Registers restored to their default values). - * @param GPIOx GPIO Port - * @retval An ErrorStatus enumeration value: - * - SUCCESS: GPIO registers are de-initialized - * - ERROR: Wrong GPIO Port - */ -ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Force and Release reset on clock of GPIOx Port */ - if (GPIOx == GPIOA) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA); - } - else if (GPIOx == GPIOB) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB); - } - else if (GPIOx == GPIOC) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC); - } -#if defined(GPIOD) - else if (GPIOx == GPIOD) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD); - } -#endif /* GPIOD */ -#if defined(GPIOE) - else if (GPIOx == GPIOE) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE); - } -#endif /* GPIOE */ -#if defined(GPIOF) - else if (GPIOx == GPIOF) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF); - } -#endif /* GPIOF */ -#if defined(GPIOG) - else if (GPIOx == GPIOG) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOG); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOG); - } -#endif /* GPIOG */ -#if defined(GPIOH) - else if (GPIOx == GPIOH) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOH); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOH); - } -#endif /* GPIOH */ -#if defined(GPIOI) - else if (GPIOx == GPIOI) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOI); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOI); - } -#endif /* GPIOI */ -#if defined(GPIOJ) - else if (GPIOx == GPIOJ) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOJ); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOJ); - } -#endif /* GPIOJ */ -#if defined(GPIOK) - else if (GPIOx == GPIOK) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOK); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOK); - } -#endif /* GPIOK */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. - * @param GPIOx GPIO Port - * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure - * that contains the configuration information for the specified GPIO peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content - * - ERROR: Not applicable - */ -ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) -{ - uint32_t pinpos = 0x00000000U; - uint32_t currentpin = 0x00000000U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); - assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); - assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); - - /* ------------------------- Configure the port pins ---------------- */ - /* Initialize pinpos on first pin set */ - pinpos = POSITION_VAL(GPIO_InitStruct->Pin); - - /* Configure the port pins */ - while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00000000U) - { - /* Get current io position */ - currentpin = (GPIO_InitStruct->Pin) & (0x00000001U << pinpos); - - if (currentpin) - { - - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) - { - /* Check Speed mode parameters */ - assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); - - /* Speed mode configuration */ - LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); - - /* Check Output mode parameters */ - assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); - - /* Output mode configuration*/ - LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType); - } - - /* Pull-up Pull down resistor configuration*/ - LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); - - if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) - { - /* Check Alternate parameter */ - assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); - - /* Speed mode configuration */ - if (POSITION_VAL(currentpin) < 0x00000008U) - { - LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); - } - else - { - LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); - } - } - - /* Pin Mode configuration */ - LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); - } - pinpos++; - } - - return (SUCCESS); -} - -/** - * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. - * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ - -void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; - GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; - GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; - GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; - GPIO_InitStruct->Alternate = LL_GPIO_AF_0; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_lptim.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_lptim.c deleted file mode 100644 index 9336b5c..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_lptim.c +++ /dev/null @@ -1,301 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_lptim.c - * @author MCD Application Team - * @brief LPTIM LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_lptim.h" -#include "stm32f4xx_ll_bus.h" -#include "stm32f4xx_ll_rcc.h" - - -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (LPTIM1) - -/** @addtogroup LPTIM_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup LPTIM_LL_Private_Macros - * @{ - */ -#define IS_LL_LPTIM_CLOCK_SOURCE(__VALUE__) (((__VALUE__) == LL_LPTIM_CLK_SOURCE_INTERNAL) \ - || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL)) - -#define IS_LL_LPTIM_CLOCK_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPTIM_PRESCALER_DIV1) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128)) - -#define IS_LL_LPTIM_WAVEFORM(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_PWM) \ - || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE)) - -#define IS_LL_LPTIM_OUTPUT_POLARITY(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_REGULAR) \ - || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE)) -/** - * @} - */ - - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup LPTIM_Private_Functions LPTIM Private Functions - * @{ - */ -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup LPTIM_LL_Exported_Functions - * @{ - */ - -/** @addtogroup LPTIM_LL_EF_Init - * @{ - */ - -/** - * @brief Set LPTIMx registers to their reset values. - * @param LPTIMx LP Timer instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: LPTIMx registers are de-initialized - * - ERROR: invalid LPTIMx instance - */ -ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx) -{ - ErrorStatus result = SUCCESS; - - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(LPTIMx)); - - if (LPTIMx == LPTIM1) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPTIM1); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPTIM1); - } - else - { - result = ERROR; - } - - return result; -} - -/** - * @brief Set each fields of the LPTIM_InitStruct structure to its default - * value. - * @param LPTIM_InitStruct pointer to a @ref LL_LPTIM_InitTypeDef structure - * @retval None - */ -void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct) -{ - /* Set the default configuration */ - LPTIM_InitStruct->ClockSource = LL_LPTIM_CLK_SOURCE_INTERNAL; - LPTIM_InitStruct->Prescaler = LL_LPTIM_PRESCALER_DIV1; - LPTIM_InitStruct->Waveform = LL_LPTIM_OUTPUT_WAVEFORM_PWM; - LPTIM_InitStruct->Polarity = LL_LPTIM_OUTPUT_POLARITY_REGULAR; -} - -/** - * @brief Configure the LPTIMx peripheral according to the specified parameters. - * @note LL_LPTIM_Init can only be called when the LPTIM instance is disabled. - * @note LPTIMx can be disabled using unitary function @ref LL_LPTIM_Disable(). - * @param LPTIMx LP Timer Instance - * @param LPTIM_InitStruct pointer to a @ref LL_LPTIM_InitTypeDef structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: LPTIMx instance has been initialized - * - ERROR: LPTIMx instance hasn't been initialized - */ -ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_InitStruct) -{ - ErrorStatus result = SUCCESS; - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(LPTIMx)); - assert_param(IS_LL_LPTIM_CLOCK_SOURCE(LPTIM_InitStruct->ClockSource)); - assert_param(IS_LL_LPTIM_CLOCK_PRESCALER(LPTIM_InitStruct->Prescaler)); - assert_param(IS_LL_LPTIM_WAVEFORM(LPTIM_InitStruct->Waveform)); - assert_param(IS_LL_LPTIM_OUTPUT_POLARITY(LPTIM_InitStruct->Polarity)); - - /* The LPTIMx_CFGR register must only be modified when the LPTIM is disabled - (ENABLE bit is reset to 0). - */ - if (LL_LPTIM_IsEnabled(LPTIMx) == 1UL) - { - result = ERROR; - } - else - { - /* Set CKSEL bitfield according to ClockSource value */ - /* Set PRESC bitfield according to Prescaler value */ - /* Set WAVE bitfield according to Waveform value */ - /* Set WAVEPOL bitfield according to Polarity value */ - MODIFY_REG(LPTIMx->CFGR, - (LPTIM_CFGR_CKSEL | LPTIM_CFGR_PRESC | LPTIM_CFGR_WAVE | LPTIM_CFGR_WAVPOL), - LPTIM_InitStruct->ClockSource | \ - LPTIM_InitStruct->Prescaler | \ - LPTIM_InitStruct->Waveform | \ - LPTIM_InitStruct->Polarity); - } - - return result; -} - -/** - * @brief Disable the LPTIM instance - * @rmtoll CR ENABLE LL_LPTIM_Disable - * @param LPTIMx Low-Power Timer instance - * @note The following sequence is required to solve LPTIM disable HW limitation. - * Please check Errata Sheet ES0335 for more details under "MCU may remain - * stuck in LPTIM interrupt when entering Stop mode" section. - * @retval None - */ -void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) -{ - LL_RCC_ClocksTypeDef rcc_clock; - uint32_t tmpclksource = 0; - uint32_t tmpIER; - uint32_t tmpCFGR; - uint32_t tmpCMP; - uint32_t tmpARR; - uint32_t primask_bit; - uint32_t tmpOR; - - /* Check the parameters */ - assert_param(IS_LPTIM_INSTANCE(LPTIMx)); - - /* Enter critical section */ - primask_bit = __get_PRIMASK(); - __set_PRIMASK(1) ; - - /********** Save LPTIM Config *********/ - /* Save LPTIM source clock */ - switch ((uint32_t)LPTIMx) - { - case LPTIM1_BASE: - tmpclksource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE); - break; - default: - break; - } - - /* Save LPTIM configuration registers */ - tmpIER = LPTIMx->IER; - tmpCFGR = LPTIMx->CFGR; - tmpCMP = LPTIMx->CMP; - tmpARR = LPTIMx->ARR; - tmpOR = LPTIMx->OR; - - /************* Reset LPTIM ************/ - (void)LL_LPTIM_DeInit(LPTIMx); - - /********* Restore LPTIM Config *******/ - LL_RCC_GetSystemClocksFreq(&rcc_clock); - - if ((tmpCMP != 0UL) || (tmpARR != 0UL)) - { - /* Force LPTIM source kernel clock from APB */ - switch ((uint32_t)LPTIMx) - { - case LPTIM1_BASE: - LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE_PCLK1); - break; - default: - break; - } - - if (tmpCMP != 0UL) - { - /* Restore CMP and ARR registers (LPTIM should be enabled first) */ - LPTIMx->CR |= LPTIM_CR_ENABLE; - LPTIMx->CMP = tmpCMP; - - /* Polling on CMP write ok status after above restore operation */ - do - { - rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ - } while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); - - LL_LPTIM_ClearFlag_CMPOK(LPTIMx); - } - - if (tmpARR != 0UL) - { - LPTIMx->CR |= LPTIM_CR_ENABLE; - LPTIMx->ARR = tmpARR; - - LL_RCC_GetSystemClocksFreq(&rcc_clock); - /* Polling on ARR write ok status after above restore operation */ - do - { - rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ - } - while (((LL_LPTIM_IsActiveFlag_ARROK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); - - LL_LPTIM_ClearFlag_ARROK(LPTIMx); - } - - - /* Restore LPTIM source kernel clock */ - LL_RCC_SetLPTIMClockSource(tmpclksource); - } - - /* Restore configuration registers (LPTIM should be disabled first) */ - LPTIMx->CR &= ~(LPTIM_CR_ENABLE); - LPTIMx->IER = tmpIER; - LPTIMx->CFGR = tmpCFGR; - LPTIMx->OR = tmpOR; - - /* Exit critical section: restore previous priority mask */ - __set_PRIMASK(primask_bit); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* LPTIM1 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c deleted file mode 100644 index efa3e57..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c +++ /dev/null @@ -1,1660 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rcc.c - * @author MCD Application Team - * @brief RCC LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_rcc.h" -#ifdef USE_FULL_ASSERT - #include "stm32_assert.h" -#else - #define assert_param(expr) ((void)0U) -#endif -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @addtogroup RCC_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCC_LL_Private_Macros - * @{ - */ -#if defined(FMPI2C1) -#define IS_LL_RCC_FMPI2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_FMPI2C1_CLKSOURCE) -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE)) -#endif /* LPTIM1 */ - -#if defined(SAI1) -#if defined(RCC_DCKCFGR_SAI1SRC) -#define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SAI1_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_SAI2_CLKSOURCE)) -#elif defined(RCC_DCKCFGR_SAI1ASRC) -#define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SAI1_A_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_SAI1_B_CLKSOURCE)) -#endif /* RCC_DCKCFGR_SAI1SRC */ -#endif /* SAI1 */ - -#if defined(SDIO) -#define IS_LL_RCC_SDIO_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SDIO_CLKSOURCE)) -#endif /* SDIO */ - -#if defined(RNG) -#define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE)) -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#if defined(DFSDM2_Channel0) -#define IS_LL_RCC_DFSDM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_CLKSOURCE)) - -#define IS_LL_RCC_DFSDM_AUDIO_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_AUDIO_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_DFSDM2_AUDIO_CLKSOURCE)) -#elif defined(DFSDM1_Channel0) -#define IS_LL_RCC_DFSDM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_CLKSOURCE)) - -#define IS_LL_RCC_DFSDM_AUDIO_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_AUDIO_CLKSOURCE)) -#endif /* DFSDM2_Channel0 */ - -#if defined(RCC_DCKCFGR_I2S2SRC) -#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_I2S2_CLKSOURCE)) -#else -#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE)) -#endif /* RCC_DCKCFGR_I2S2SRC */ - -#if defined(CEC) -#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE)) -#endif /* CEC */ - -#if defined(DSI) -#define IS_LL_RCC_DSI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DSI_CLKSOURCE)) -#endif /* DSI */ - -#if defined(LTDC) -#define IS_LL_RCC_LTDC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LTDC_CLKSOURCE)) -#endif /* LTDC */ - -#if defined(SPDIFRX) -#define IS_LL_RCC_SPDIFRX_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SPDIFRX1_CLKSOURCE)) -#endif /* SPDIFRX */ -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup RCC_LL_Private_Functions RCC Private functions - * @{ - */ -uint32_t RCC_GetSystemClockFreq(void); -uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); -uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); -uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency); -uint32_t RCC_PLL_GetFreqDomain_SYS(uint32_t SYSCLK_Source); -uint32_t RCC_PLL_GetFreqDomain_48M(void); -#if defined(RCC_DCKCFGR_I2SSRC) || defined(RCC_DCKCFGR_I2S1SRC) -uint32_t RCC_PLL_GetFreqDomain_I2S(void); -#endif /* RCC_DCKCFGR_I2SSRC || RCC_DCKCFGR_I2S1SRC */ -#if defined(SPDIFRX) -uint32_t RCC_PLL_GetFreqDomain_SPDIFRX(void); -#endif /* SPDIFRX */ -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -uint32_t RCC_PLL_GetFreqDomain_SAI(void); -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ -#if defined(DSI) -uint32_t RCC_PLL_GetFreqDomain_DSI(void); -#endif /* DSI */ -#if defined(RCC_PLLSAI_SUPPORT) -uint32_t RCC_PLLSAI_GetFreqDomain_SAI(void); -#if defined(RCC_PLLSAICFGR_PLLSAIP) -uint32_t RCC_PLLSAI_GetFreqDomain_48M(void); -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#if defined(LTDC) -uint32_t RCC_PLLSAI_GetFreqDomain_LTDC(void); -#endif /* LTDC */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2S_SUPPORT) -uint32_t RCC_PLLI2S_GetFreqDomain_I2S(void); -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -uint32_t RCC_PLLI2S_GetFreqDomain_48M(void); -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#if defined(SAI1) -uint32_t RCC_PLLI2S_GetFreqDomain_SAI(void); -#endif /* SAI1 */ -#if defined(SPDIFRX) -uint32_t RCC_PLLI2S_GetFreqDomain_SPDIFRX(void); -#endif /* SPDIFRX */ -#endif /* RCC_PLLI2S_SUPPORT */ -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCC_LL_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_LL_EF_Init - * @{ - */ - -/** - * @brief Reset the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE and PLL OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RCC registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_RCC_DeInit(void) -{ - __IO uint32_t vl_mask; - - /* Set HSION bit */ - LL_RCC_HSI_Enable(); - - /* Wait for HSI READY bit */ - while(LL_RCC_HSI_IsReady() != 1U) - {} - - /* Reset CFGR register */ - LL_RCC_WriteReg(CFGR, 0x00000000U); - - /* Read CR register */ - vl_mask = LL_RCC_ReadReg(CR); - - /* Reset HSEON, HSEBYP, PLLON, CSSON bits */ - CLEAR_BIT(vl_mask, - (RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_PLLON | RCC_CR_CSSON)); - -#if defined(RCC_PLLSAI_SUPPORT) - /* Reset PLLSAION bit */ - CLEAR_BIT(vl_mask, RCC_CR_PLLSAION); -#endif /* RCC_PLLSAI_SUPPORT */ - -#if defined(RCC_PLLI2S_SUPPORT) - /* Reset PLLI2SON bit */ - CLEAR_BIT(vl_mask, RCC_CR_PLLI2SON); -#endif /* RCC_PLLI2S_SUPPORT */ - - /* Write new value in CR register */ - LL_RCC_WriteReg(CR, vl_mask); - - /* Set HSITRIM bits to the reset value*/ - LL_RCC_HSI_SetCalibTrimming(0x10U); - - /* Wait for PLL READY bit to be reset */ - while(LL_RCC_PLL_IsReady() != 0U) - {} - - /* Reset PLLCFGR register */ - LL_RCC_WriteReg(PLLCFGR, RCC_PLLCFGR_RST_VALUE); - -#if defined(RCC_PLLI2S_SUPPORT) - /* Reset PLLI2SCFGR register */ - LL_RCC_WriteReg(PLLI2SCFGR, RCC_PLLI2SCFGR_RST_VALUE); -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) - /* Reset PLLSAICFGR register */ - LL_RCC_WriteReg(PLLSAICFGR, RCC_PLLSAICFGR_RST_VALUE); -#endif /* RCC_PLLSAI_SUPPORT */ - - /* Disable all interrupts */ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE); - -#if defined(RCC_CIR_PLLI2SRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -#endif /* RCC_CIR_PLLI2SRDYIE */ - -#if defined(RCC_CIR_PLLSAIRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -#endif /* RCC_CIR_PLLSAIRDYIE */ - - /* Clear all interrupt flags */ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_CSSC); - -#if defined(RCC_CIR_PLLI2SRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -#endif /* RCC_CIR_PLLI2SRDYC */ - -#if defined(RCC_CIR_PLLSAIRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -#endif /* RCC_CIR_PLLSAIRDYC */ - - /* Clear LSION bit */ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); - - /* Reset all CSR flags */ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); - - return SUCCESS; -} - -/** - * @} - */ - -/** @addtogroup RCC_LL_EF_Get_Freq - * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks - * and different peripheral clocks available on the device. - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(***) - * or HSI_VALUE(**) multiplied/divided by the PLL factors. - * @note (**) HSI_VALUE is a constant defined in this file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (***) HSE_VALUE is a constant defined in this file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * @note The result of this function could be incorrect when using fractional - * value for HSE crystal. - * @note This function can be used by the user application to compute the - * baud-rate for the communication peripherals or configure other parameters. - * @{ - */ - -/** - * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks - * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function - * must be called to update structure fields. Otherwise, any - * configuration based on this function will be incorrect. - * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies - * @retval None - */ -void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) -{ - /* Get SYSCLK frequency */ - RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); - - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); - - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); - - /* PCLK2 clock frequency */ - RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency); -} - -#if defined(FMPI2C1) -/** - * @brief Return FMPI2Cx clock frequency - * @param FMPI2CxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE - * @retval FMPI2C clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready - */ -uint32_t LL_RCC_GetFMPI2CClockFreq(uint32_t FMPI2CxSource) -{ - uint32_t FMPI2C_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_FMPI2C_CLKSOURCE(FMPI2CxSource)); - - if (FMPI2CxSource == LL_RCC_FMPI2C1_CLKSOURCE) - { - /* FMPI2C1 CLK clock frequency */ - switch (LL_RCC_GetFMPI2CClockSource(FMPI2CxSource)) - { - case LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK: /* FMPI2C1 Clock is System Clock */ - FMPI2C_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_FMPI2C1_CLKSOURCE_HSI: /* FMPI2C1 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady()) - { - FMPI2C_frequency = HSI_VALUE; - } - break; - - case LL_RCC_FMPI2C1_CLKSOURCE_PCLK1: /* FMPI2C1 Clock is PCLK1 */ - default: - FMPI2C_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } - - return FMPI2C_frequency; -} -#endif /* FMPI2C1 */ - -/** - * @brief Return I2Sx clock frequency - * @param I2SxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE - * @arg @ref LL_RCC_I2S2_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval I2S clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) -{ - uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); - - if (I2SxSource == LL_RCC_I2S1_CLKSOURCE) - { - /* I2S1 CLK clock frequency */ - switch (LL_RCC_GetI2SClockSource(I2SxSource)) - { -#if defined(RCC_PLLI2S_SUPPORT) - case LL_RCC_I2S1_CLKSOURCE_PLLI2S: /* I2S1 Clock is PLLI2S */ - if (LL_RCC_PLLI2S_IsReady()) - { - i2s_frequency = RCC_PLLI2S_GetFreqDomain_I2S(); - } - break; -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_DCKCFGR_I2SSRC) || defined(RCC_DCKCFGR_I2S1SRC) - case LL_RCC_I2S1_CLKSOURCE_PLL: /* I2S1 Clock is PLL */ - if (LL_RCC_PLL_IsReady()) - { - i2s_frequency = RCC_PLL_GetFreqDomain_I2S(); - } - break; - - case LL_RCC_I2S1_CLKSOURCE_PLLSRC: /* I2S1 Clock is PLL Main source */ - switch (LL_RCC_PLL_GetMainSource()) - { - case LL_RCC_PLLSOURCE_HSE: /* I2S1 Clock is HSE Osc. */ - if (LL_RCC_HSE_IsReady()) - { - i2s_frequency = HSE_VALUE; - } - break; - - case LL_RCC_PLLSOURCE_HSI: /* I2S1 Clock is HSI Osc. */ - default: - if (LL_RCC_HSI_IsReady()) - { - i2s_frequency = HSI_VALUE; - } - break; - } - break; -#endif /* RCC_DCKCFGR_I2SSRC || RCC_DCKCFGR_I2S1SRC */ - - case LL_RCC_I2S1_CLKSOURCE_PIN: /* I2S1 Clock is External clock */ - default: - i2s_frequency = EXTERNAL_CLOCK_VALUE; - break; - } - } -#if defined(RCC_DCKCFGR_I2S2SRC) - else - { - /* I2S2 CLK clock frequency */ - switch (LL_RCC_GetI2SClockSource(I2SxSource)) - { - case LL_RCC_I2S2_CLKSOURCE_PLLI2S: /* I2S2 Clock is PLLI2S */ - if (LL_RCC_PLLI2S_IsReady()) - { - i2s_frequency = RCC_PLLI2S_GetFreqDomain_I2S(); - } - break; - - case LL_RCC_I2S2_CLKSOURCE_PLL: /* I2S2 Clock is PLL */ - if (LL_RCC_PLL_IsReady()) - { - i2s_frequency = RCC_PLL_GetFreqDomain_I2S(); - } - break; - - case LL_RCC_I2S2_CLKSOURCE_PLLSRC: /* I2S2 Clock is PLL Main source */ - switch (LL_RCC_PLL_GetMainSource()) - { - case LL_RCC_PLLSOURCE_HSE: /* I2S2 Clock is HSE Osc. */ - if (LL_RCC_HSE_IsReady()) - { - i2s_frequency = HSE_VALUE; - } - break; - - case LL_RCC_PLLSOURCE_HSI: /* I2S2 Clock is HSI Osc. */ - default: - if (LL_RCC_HSI_IsReady()) - { - i2s_frequency = HSI_VALUE; - } - break; - } - break; - - case LL_RCC_I2S2_CLKSOURCE_PIN: /* I2S2 Clock is External clock */ - default: - i2s_frequency = EXTERNAL_CLOCK_VALUE; - break; - } - } -#endif /* RCC_DCKCFGR_I2S2SRC */ - - return i2s_frequency; -} - -#if defined(LPTIM1) -/** - * @brief Return LPTIMx clock frequency - * @param LPTIMxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE - * @retval LPTIM clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready - */ -uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource) -{ - uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource)); - - if (LPTIMxSource == LL_RCC_LPTIM1_CLKSOURCE) - { - /* LPTIM1CLK clock frequency */ - switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) - { - case LL_RCC_LPTIM1_CLKSOURCE_LSI: /* LPTIM1 Clock is LSI Osc. */ - if (LL_RCC_LSI_IsReady()) - { - lptim_frequency = LSI_VALUE; - } - break; - - case LL_RCC_LPTIM1_CLKSOURCE_HSI: /* LPTIM1 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady()) - { - lptim_frequency = HSI_VALUE; - } - break; - - case LL_RCC_LPTIM1_CLKSOURCE_LSE: /* LPTIM1 Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady()) - { - lptim_frequency = LSE_VALUE; - } - break; - - case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: /* LPTIM1 Clock is PCLK1 */ - default: - lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } - - return lptim_frequency; -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Return SAIx clock frequency - * @param SAIxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval SAI clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource) -{ - uint32_t sai_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_SAI_CLKSOURCE(SAIxSource)); - -#if defined(RCC_DCKCFGR_SAI1SRC) - if ((SAIxSource == LL_RCC_SAI1_CLKSOURCE) || (SAIxSource == LL_RCC_SAI2_CLKSOURCE)) - { - /* SAI1CLK clock frequency */ - switch (LL_RCC_GetSAIClockSource(SAIxSource)) - { - case LL_RCC_SAI1_CLKSOURCE_PLLSAI: /* PLLSAI clock used as SAI1 clock source */ - case LL_RCC_SAI2_CLKSOURCE_PLLSAI: /* PLLSAI clock used as SAI2 clock source */ - if (LL_RCC_PLLSAI_IsReady()) - { - sai_frequency = RCC_PLLSAI_GetFreqDomain_SAI(); - } - break; - - case LL_RCC_SAI1_CLKSOURCE_PLLI2S: /* PLLI2S clock used as SAI1 clock source */ - case LL_RCC_SAI2_CLKSOURCE_PLLI2S: /* PLLI2S clock used as SAI2 clock source */ - if (LL_RCC_PLLI2S_IsReady()) - { - sai_frequency = RCC_PLLI2S_GetFreqDomain_SAI(); - } - break; - - case LL_RCC_SAI1_CLKSOURCE_PLL: /* PLL clock used as SAI1 clock source */ - case LL_RCC_SAI2_CLKSOURCE_PLL: /* PLL clock used as SAI2 clock source */ - if (LL_RCC_PLL_IsReady()) - { - sai_frequency = RCC_PLL_GetFreqDomain_SAI(); - } - break; - - case LL_RCC_SAI2_CLKSOURCE_PLLSRC: - switch (LL_RCC_PLL_GetMainSource()) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE clock used as SAI2 clock source */ - if (LL_RCC_HSE_IsReady()) - { - sai_frequency = HSE_VALUE; - } - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI clock used as SAI2 clock source */ - default: - if (LL_RCC_HSI_IsReady()) - { - sai_frequency = HSI_VALUE; - } - break; - } - break; - - case LL_RCC_SAI1_CLKSOURCE_PIN: /* External input clock used as SAI1 clock source */ - default: - sai_frequency = EXTERNAL_CLOCK_VALUE; - break; - } - } -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI1ASRC) - if ((SAIxSource == LL_RCC_SAI1_A_CLKSOURCE) || (SAIxSource == LL_RCC_SAI1_B_CLKSOURCE)) - { - /* SAI1CLK clock frequency */ - switch (LL_RCC_GetSAIClockSource(SAIxSource)) - { -#if defined(RCC_PLLSAI_SUPPORT) - case LL_RCC_SAI1_A_CLKSOURCE_PLLSAI: /* PLLSAI clock used as SAI1 Block A clock source */ - case LL_RCC_SAI1_B_CLKSOURCE_PLLSAI: /* PLLSAI clock used as SAI1 Block B clock source */ - if (LL_RCC_PLLSAI_IsReady()) - { - sai_frequency = RCC_PLLSAI_GetFreqDomain_SAI(); - } - break; -#endif /* RCC_PLLSAI_SUPPORT */ - - case LL_RCC_SAI1_A_CLKSOURCE_PLLI2S: /* PLLI2S clock used as SAI1 Block A clock source */ - case LL_RCC_SAI1_B_CLKSOURCE_PLLI2S: /* PLLI2S clock used as SAI1 Block B clock source */ - if (LL_RCC_PLLI2S_IsReady()) - { - sai_frequency = RCC_PLLI2S_GetFreqDomain_SAI(); - } - break; - -#if defined(RCC_SAI1A_PLLSOURCE_SUPPORT) - case LL_RCC_SAI1_A_CLKSOURCE_PLL: /* PLL clock used as SAI1 Block A clock source */ - case LL_RCC_SAI1_B_CLKSOURCE_PLL: /* PLL clock used as SAI1 Block B clock source */ - if (LL_RCC_PLL_IsReady()) - { - sai_frequency = RCC_PLL_GetFreqDomain_SAI(); - } - break; - - case LL_RCC_SAI1_A_CLKSOURCE_PLLSRC: - case LL_RCC_SAI1_B_CLKSOURCE_PLLSRC: - switch (LL_RCC_PLL_GetMainSource()) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE clock used as SAI1 Block A or B clock source */ - if (LL_RCC_HSE_IsReady()) - { - sai_frequency = HSE_VALUE; - } - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI clock used as SAI1 Block A or B clock source */ - default: - if (LL_RCC_HSI_IsReady()) - { - sai_frequency = HSI_VALUE; - } - break; - } - break; -#endif /* RCC_SAI1A_PLLSOURCE_SUPPORT */ - - case LL_RCC_SAI1_A_CLKSOURCE_PIN: /* External input clock used as SAI1 Block A clock source */ - case LL_RCC_SAI1_B_CLKSOURCE_PIN: /* External input clock used as SAI1 Block B clock source */ - default: - sai_frequency = EXTERNAL_CLOCK_VALUE; - break; - } - } -#endif /* RCC_DCKCFGR_SAI1ASRC */ - - return sai_frequency; -} -#endif /* SAI1 */ - -#if defined(SDIO) -/** - * @brief Return SDIOx clock frequency - * @param SDIOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE - * @retval SDIO clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetSDIOClockFreq(uint32_t SDIOxSource) -{ - uint32_t SDIO_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_SDIO_CLKSOURCE(SDIOxSource)); - - if (SDIOxSource == LL_RCC_SDIO_CLKSOURCE) - { -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) - /* SDIOCLK clock frequency */ - switch (LL_RCC_GetSDIOClockSource(SDIOxSource)) - { - case LL_RCC_SDIO_CLKSOURCE_PLL48CLK: /* PLL48M clock used as SDIO clock source */ - switch (LL_RCC_GetCK48MClockSource(LL_RCC_CK48M_CLKSOURCE)) - { - case LL_RCC_CK48M_CLKSOURCE_PLL: /* PLL clock used as 48Mhz domain clock */ - if (LL_RCC_PLL_IsReady()) - { - SDIO_frequency = RCC_PLL_GetFreqDomain_48M(); - } - break; - -#if defined(RCC_PLLSAI_SUPPORT) - case LL_RCC_CK48M_CLKSOURCE_PLLSAI: /* PLLSAI clock used as 48Mhz domain clock */ - default: - if (LL_RCC_PLLSAI_IsReady()) - { - SDIO_frequency = RCC_PLLSAI_GetFreqDomain_48M(); - } - break; -#endif /* RCC_PLLSAI_SUPPORT */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) - case LL_RCC_CK48M_CLKSOURCE_PLLI2S: /* PLLI2S clock used as 48Mhz domain clock */ - default: - if (LL_RCC_PLLI2S_IsReady()) - { - SDIO_frequency = RCC_PLLI2S_GetFreqDomain_48M(); - } - break; -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ - } - break; - - case LL_RCC_SDIO_CLKSOURCE_SYSCLK: /* PLL clock used as SDIO clock source */ - default: - SDIO_frequency = RCC_GetSystemClockFreq(); - break; - } -#else - /* PLL clock used as 48Mhz domain clock */ - if (LL_RCC_PLL_IsReady()) - { - SDIO_frequency = RCC_PLL_GetFreqDomain_48M(); - } -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - } - - return SDIO_frequency; -} -#endif /* SDIO */ - -#if defined(RNG) -/** - * @brief Return RNGx clock frequency - * @param RNGxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE - * @retval RNG clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) -{ - uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource)); - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) - /* RNGCLK clock frequency */ - switch (LL_RCC_GetRNGClockSource(RNGxSource)) - { -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) - case LL_RCC_RNG_CLKSOURCE_PLLI2S: /* PLLI2S clock used as RNG clock source */ - if (LL_RCC_PLLI2S_IsReady()) - { - rng_frequency = RCC_PLLI2S_GetFreqDomain_48M(); - } - break; -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_PLLSAI_SUPPORT) - case LL_RCC_RNG_CLKSOURCE_PLLSAI: /* PLLSAI clock used as RNG clock source */ - if (LL_RCC_PLLSAI_IsReady()) - { - rng_frequency = RCC_PLLSAI_GetFreqDomain_48M(); - } - break; -#endif /* RCC_PLLSAI_SUPPORT */ - - case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */ - default: - if (LL_RCC_PLL_IsReady()) - { - rng_frequency = RCC_PLL_GetFreqDomain_48M(); - } - break; - } -#else - /* PLL clock used as RNG clock source */ - if (LL_RCC_PLL_IsReady()) - { - rng_frequency = RCC_PLL_GetFreqDomain_48M(); - } -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - - return rng_frequency; -} -#endif /* RNG */ - -#if defined(CEC) -/** - * @brief Return CEC clock frequency - * @param CECxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE - * @retval CEC clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready - */ -uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource) -{ - uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource)); - - /* CECCLK clock frequency */ - switch (LL_RCC_GetCECClockSource(CECxSource)) - { - case LL_RCC_CEC_CLKSOURCE_LSE: /* CEC Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady()) - { - cec_frequency = LSE_VALUE; - } - break; - - case LL_RCC_CEC_CLKSOURCE_HSI_DIV488: /* CEC Clock is HSI Osc. */ - default: - if (LL_RCC_HSI_IsReady()) - { - cec_frequency = HSI_VALUE/488U; - } - break; - } - - return cec_frequency; -} -#endif /* CEC */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Return USBx clock frequency - * @param USBxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE - * @retval USB clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) -{ - uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource)); - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) - /* USBCLK clock frequency */ - switch (LL_RCC_GetUSBClockSource(USBxSource)) - { -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) - case LL_RCC_USB_CLKSOURCE_PLLI2S: /* PLLI2S clock used as USB clock source */ - if (LL_RCC_PLLI2S_IsReady()) - { - usb_frequency = RCC_PLLI2S_GetFreqDomain_48M(); - } - break; - -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_PLLSAI_SUPPORT) - case LL_RCC_USB_CLKSOURCE_PLLSAI: /* PLLSAI clock used as USB clock source */ - if (LL_RCC_PLLSAI_IsReady()) - { - usb_frequency = RCC_PLLSAI_GetFreqDomain_48M(); - } - break; -#endif /* RCC_PLLSAI_SUPPORT */ - - case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ - default: - if (LL_RCC_PLL_IsReady()) - { - usb_frequency = RCC_PLL_GetFreqDomain_48M(); - } - break; - } -#else - /* PLL clock used as USB clock source */ - if (LL_RCC_PLL_IsReady()) - { - usb_frequency = RCC_PLL_GetFreqDomain_48M(); - } -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - - return usb_frequency; -} -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#if defined(DFSDM1_Channel0) -/** - * @brief Return DFSDMx clock frequency - * @param DFSDMxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval DFSDM clock frequency (in Hz) - */ -uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource) -{ - uint32_t dfsdm_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_DFSDM_CLKSOURCE(DFSDMxSource)); - - if (DFSDMxSource == LL_RCC_DFSDM1_CLKSOURCE) - { - /* DFSDM1CLK clock frequency */ - switch (LL_RCC_GetDFSDMClockSource(DFSDMxSource)) - { - case LL_RCC_DFSDM1_CLKSOURCE_SYSCLK: /* DFSDM1 Clock is SYSCLK */ - dfsdm_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_DFSDM1_CLKSOURCE_PCLK2: /* DFSDM1 Clock is PCLK2 */ - default: - dfsdm_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } -#if defined(DFSDM2_Channel0) - else - { - /* DFSDM2CLK clock frequency */ - switch (LL_RCC_GetDFSDMClockSource(DFSDMxSource)) - { - case LL_RCC_DFSDM2_CLKSOURCE_SYSCLK: /* DFSDM2 Clock is SYSCLK */ - dfsdm_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_DFSDM2_CLKSOURCE_PCLK2: /* DFSDM2 Clock is PCLK2 */ - default: - dfsdm_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } -#endif /* DFSDM2_Channel0 */ - - return dfsdm_frequency; -} - -/** - * @brief Return DFSDMx Audio clock frequency - * @param DFSDMxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval DFSDM clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource) -{ - uint32_t dfsdm_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_DFSDM_AUDIO_CLKSOURCE(DFSDMxSource)); - - if (DFSDMxSource == LL_RCC_DFSDM1_AUDIO_CLKSOURCE) - { - /* DFSDM1CLK clock frequency */ - switch (LL_RCC_GetDFSDMAudioClockSource(DFSDMxSource)) - { - case LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1: /* I2S1 clock used as DFSDM1 clock */ - dfsdm_frequency = LL_RCC_GetI2SClockFreq(LL_RCC_I2S1_CLKSOURCE); - break; - - case LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2: /* I2S2 clock used as DFSDM1 clock */ - default: - dfsdm_frequency = LL_RCC_GetI2SClockFreq(LL_RCC_I2S2_CLKSOURCE); - break; - } - } -#if defined(DFSDM2_Channel0) - else - { - /* DFSDM2CLK clock frequency */ - switch (LL_RCC_GetDFSDMAudioClockSource(DFSDMxSource)) - { - case LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1: /* I2S1 clock used as DFSDM2 clock */ - dfsdm_frequency = LL_RCC_GetI2SClockFreq(LL_RCC_I2S1_CLKSOURCE); - break; - - case LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2: /* I2S2 clock used as DFSDM2 clock */ - default: - dfsdm_frequency = LL_RCC_GetI2SClockFreq(LL_RCC_I2S2_CLKSOURCE); - break; - } - } -#endif /* DFSDM2_Channel0 */ - - return dfsdm_frequency; -} -#endif /* DFSDM1_Channel0 */ - -#if defined(DSI) -/** - * @brief Return DSI clock frequency - * @param DSIxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE - * @retval DSI clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that external clock is used - */ -uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource) -{ - uint32_t dsi_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_DSI_CLKSOURCE(DSIxSource)); - - /* DSICLK clock frequency */ - switch (LL_RCC_GetDSIClockSource(DSIxSource)) - { - case LL_RCC_DSI_CLKSOURCE_PLL: /* DSI Clock is PLL Osc. */ - if (LL_RCC_PLL_IsReady()) - { - dsi_frequency = RCC_PLL_GetFreqDomain_DSI(); - } - break; - - case LL_RCC_DSI_CLKSOURCE_PHY: /* DSI Clock is DSI physical clock. */ - default: - dsi_frequency = LL_RCC_PERIPH_FREQUENCY_NA; - break; - } - - return dsi_frequency; -} -#endif /* DSI */ - -#if defined(LTDC) -/** - * @brief Return LTDC clock frequency - * @param LTDCxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_LTDC_CLKSOURCE - * @retval LTDC clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator PLLSAI is not ready - */ -uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource) -{ - uint32_t ltdc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_LTDC_CLKSOURCE(LTDCxSource)); - - if (LL_RCC_PLLSAI_IsReady()) - { - ltdc_frequency = RCC_PLLSAI_GetFreqDomain_LTDC(); - } - - return ltdc_frequency; -} -#endif /* LTDC */ - -#if defined(SPDIFRX) -/** - * @brief Return SPDIFRX clock frequency - * @param SPDIFRXxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE - * @retval SPDIFRX clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready - */ -uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource) -{ - uint32_t spdifrx_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_SPDIFRX_CLKSOURCE(SPDIFRXxSource)); - - /* SPDIFRX1CLK clock frequency */ - switch (LL_RCC_GetSPDIFRXClockSource(SPDIFRXxSource)) - { - case LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S: /* SPDIFRX Clock is PLLI2S Osc. */ - if (LL_RCC_PLLI2S_IsReady()) - { - spdifrx_frequency = RCC_PLLI2S_GetFreqDomain_SPDIFRX(); - } - break; - - case LL_RCC_SPDIFRX1_CLKSOURCE_PLL: /* SPDIFRX Clock is PLL Osc. */ - default: - if (LL_RCC_PLL_IsReady()) - { - spdifrx_frequency = RCC_PLL_GetFreqDomain_SPDIFRX(); - } - break; - } - - return spdifrx_frequency; -} -#endif /* SPDIFRX */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup RCC_LL_Private_Functions - * @{ - */ - -/** - * @brief Return SYSTEM clock frequency - * @retval SYSTEM clock frequency (in Hz) - */ -uint32_t RCC_GetSystemClockFreq(void) -{ - uint32_t frequency = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (LL_RCC_GetSysClkSource()) - { - case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ - frequency = HSI_VALUE; - break; - - case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ - frequency = HSE_VALUE; - break; - - case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ - frequency = RCC_PLL_GetFreqDomain_SYS(LL_RCC_SYS_CLKSOURCE_STATUS_PLL); - break; - -#if defined(RCC_PLLR_SYSCLK_SUPPORT) - case LL_RCC_SYS_CLKSOURCE_STATUS_PLLR: /* PLLR used as system clock source */ - frequency = RCC_PLL_GetFreqDomain_SYS(LL_RCC_SYS_CLKSOURCE_STATUS_PLLR); - break; -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ - - default: - frequency = HSI_VALUE; - break; - } - - return frequency; -} - -/** - * @brief Return HCLK clock frequency - * @param SYSCLK_Frequency SYSCLK clock frequency - * @retval HCLK clock frequency (in Hz) - */ -uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) -{ - /* HCLK clock frequency */ - return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); -} - -/** - * @brief Return PCLK1 clock frequency - * @param HCLK_Frequency HCLK clock frequency - * @retval PCLK1 clock frequency (in Hz) - */ -uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) -{ - /* PCLK1 clock frequency */ - return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); -} - -/** - * @brief Return PCLK2 clock frequency - * @param HCLK_Frequency HCLK clock frequency - * @retval PCLK2 clock frequency (in Hz) - */ -uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) -{ - /* PCLK2 clock frequency */ - return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler()); -} - -/** - * @brief Return PLL clock frequency used for system domain - * @param SYSCLK_Source System clock source - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_SYS(uint32_t SYSCLK_Source) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U, plloutputfreq = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / (PLLP or PLLR) - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - pllinputfreq = HSI_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - default: - pllinputfreq = HSI_VALUE; - break; - } - - if (SYSCLK_Source == LL_RCC_SYS_CLKSOURCE_STATUS_PLL) - { - plloutputfreq = __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); - } -#if defined(RCC_PLLR_SYSCLK_SUPPORT) - else - { - plloutputfreq = __LL_RCC_CALC_PLLRCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); - } -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ - - return plloutputfreq; -} - -/** - * @brief Return PLL clock frequency used for 48 MHz domain - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_48M(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN - 48M Domain clock = PLL_VCO / PLLQ - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - pllinputfreq = HSI_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLCLK_48M_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); -} - -#if defined(DSI) -/** - * @brief Return PLL clock frequency used for DSI clock - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_DSI(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - DSICLK = PLL_VCO / PLLR - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLCLK_DSI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); -} -#endif /* DSI */ - -#if defined(RCC_DCKCFGR_I2SSRC) || defined(RCC_DCKCFGR_I2S1SRC) -/** - * @brief Return PLL clock frequency used for I2S clock - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_I2S(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - I2SCLK = PLL_VCO / PLLR - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLCLK_I2S_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); -} -#endif /* RCC_DCKCFGR_I2SSRC || RCC_DCKCFGR_I2S1SRC */ - -#if defined(SPDIFRX) -/** - * @brief Return PLL clock frequency used for SPDIFRX clock - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_SPDIFRX(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SPDIFRXCLK = PLL_VCO / PLLR - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); -} -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Return PLL clock frequency used for SAI clock - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_SAI(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U, plloutputfreq = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SAICLK = (PLL_VCO / PLLR) / PLLDIVR - or - SAICLK = PLL_VCO / PLLR - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - default: - pllinputfreq = HSI_VALUE; - break; - } - -#if defined(RCC_DCKCFGR_PLLDIVR) - plloutputfreq = __LL_RCC_CALC_PLLCLK_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR(), LL_RCC_PLL_GetDIVR()); -#else - plloutputfreq = __LL_RCC_CALC_PLLCLK_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); -#endif /* RCC_DCKCFGR_PLLDIVR */ - - return plloutputfreq; -} -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Return PLLSAI clock frequency used for SAI domain - * @retval PLLSAI clock frequency (in Hz) - */ -uint32_t RCC_PLLSAI_GetFreqDomain_SAI(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLLSAI_VCO = (HSE_VALUE or HSI_VALUE / PLLSAIM) * PLLSAIN - SAI domain clock = (PLLSAI_VCO / PLLSAIQ) / PLLSAIDIVQ - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI clock source */ - pllinputfreq = HSI_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI clock source */ - pllinputfreq = HSE_VALUE; - break; - - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLSAI_SAI_FREQ(pllinputfreq, LL_RCC_PLLSAI_GetDivider(), - LL_RCC_PLLSAI_GetN(), LL_RCC_PLLSAI_GetQ(), LL_RCC_PLLSAI_GetDIVQ()); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Return PLLSAI clock frequency used for 48Mhz domain - * @retval PLLSAI clock frequency (in Hz) - */ -uint32_t RCC_PLLSAI_GetFreqDomain_48M(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLLSAI_VCO = (HSE_VALUE or HSI_VALUE / PLLSAIM) * PLLSAIN - 48M Domain clock = PLLSAI_VCO / PLLSAIP - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI clock source */ - pllinputfreq = HSI_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI clock source */ - pllinputfreq = HSE_VALUE; - break; - - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLSAI_48M_FREQ(pllinputfreq, LL_RCC_PLLSAI_GetDivider(), - LL_RCC_PLLSAI_GetN(), LL_RCC_PLLSAI_GetP()); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Return PLLSAI clock frequency used for LTDC domain - * @retval PLLSAI clock frequency (in Hz) - */ -uint32_t RCC_PLLSAI_GetFreqDomain_LTDC(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLLSAI_VCO = (HSE_VALUE or HSI_VALUE / PLLSAIM) * PLLSAIN - LTDC Domain clock = (PLLSAI_VCO / PLLSAIR) / PLLSAIDIVR - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI clock source */ - pllinputfreq = HSI_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI clock source */ - pllinputfreq = HSE_VALUE; - break; - - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLSAI_LTDC_FREQ(pllinputfreq, LL_RCC_PLLSAI_GetDivider(), - LL_RCC_PLLSAI_GetN(), LL_RCC_PLLSAI_GetR(), LL_RCC_PLLSAI_GetDIVR()); -} -#endif /* LTDC */ -#endif /* RCC_PLLSAI_SUPPORT */ - -#if defined(RCC_PLLI2S_SUPPORT) -#if defined(SAI1) -/** - * @brief Return PLLI2S clock frequency used for SAI domains - * @retval PLLI2S clock frequency (in Hz) - */ -uint32_t RCC_PLLI2S_GetFreqDomain_SAI(void) -{ - uint32_t plli2sinputfreq = 0U, plli2ssource = 0U, plli2soutputfreq = 0U; - - /* PLLI2S_VCO = (HSE_VALUE or HSI_VALUE / PLLI2SM) * PLLI2SN - SAI domain clock = (PLLI2S_VCO / PLLI2SQ) / PLLI2SDIVQ - or - SAI domain clock = (PLLI2S_VCO / PLLI2SR) / PLLI2SDIVR - */ - plli2ssource = LL_RCC_PLLI2S_GetMainSource(); - - switch (plli2ssource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */ - plli2sinputfreq = HSE_VALUE; - break; - -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - case LL_RCC_PLLI2SSOURCE_PIN: /* External pin input clock used as PLLI2S clock source */ - plli2sinputfreq = EXTERNAL_CLOCK_VALUE; - break; -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */ - default: - plli2sinputfreq = HSI_VALUE; - break; - } - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) - plli2soutputfreq = __LL_RCC_CALC_PLLI2S_SAI_FREQ(plli2sinputfreq, LL_RCC_PLLI2S_GetDivider(), - LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetQ(), LL_RCC_PLLI2S_GetDIVQ()); -#else - plli2soutputfreq = __LL_RCC_CALC_PLLI2S_SAI_FREQ(plli2sinputfreq, LL_RCC_PLLI2S_GetDivider(), - LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetR(), LL_RCC_PLLI2S_GetDIVR()); -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - - return plli2soutputfreq; -} -#endif /* SAI1 */ - -#if defined(SPDIFRX) -/** - * @brief Return PLLI2S clock frequency used for SPDIFRX domain - * @retval PLLI2S clock frequency (in Hz) - */ -uint32_t RCC_PLLI2S_GetFreqDomain_SPDIFRX(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLLI2S_VCO = (HSE_VALUE or HSI_VALUE / PLLI2SM) * PLLI2SN - SPDIFRX Domain clock = PLLI2S_VCO / PLLI2SP - */ - pllsource = LL_RCC_PLLI2S_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */ - pllinputfreq = HSE_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */ - default: - pllinputfreq = HSI_VALUE; - break; - } - - return __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(pllinputfreq, LL_RCC_PLLI2S_GetDivider(), - LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetP()); -} -#endif /* SPDIFRX */ - -/** - * @brief Return PLLI2S clock frequency used for I2S domain - * @retval PLLI2S clock frequency (in Hz) - */ -uint32_t RCC_PLLI2S_GetFreqDomain_I2S(void) -{ - uint32_t plli2sinputfreq = 0U, plli2ssource = 0U, plli2soutputfreq = 0U; - - /* PLLI2S_VCO = (HSE_VALUE or HSI_VALUE / PLLI2SM) * PLLI2SN - I2S Domain clock = PLLI2S_VCO / PLLI2SR - */ - plli2ssource = LL_RCC_PLLI2S_GetMainSource(); - - switch (plli2ssource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */ - plli2sinputfreq = HSE_VALUE; - break; - -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - case LL_RCC_PLLI2SSOURCE_PIN: /* External pin input clock used as PLLI2S clock source */ - plli2sinputfreq = EXTERNAL_CLOCK_VALUE; - break; -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */ - default: - plli2sinputfreq = HSI_VALUE; - break; - } - - plli2soutputfreq = __LL_RCC_CALC_PLLI2S_I2S_FREQ(plli2sinputfreq, LL_RCC_PLLI2S_GetDivider(), - LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetR()); - - return plli2soutputfreq; -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Return PLLI2S clock frequency used for 48Mhz domain - * @retval PLLI2S clock frequency (in Hz) - */ -uint32_t RCC_PLLI2S_GetFreqDomain_48M(void) -{ - uint32_t plli2sinputfreq = 0U, plli2ssource = 0U, plli2soutputfreq = 0U; - - /* PLL48M_VCO = (HSE_VALUE or HSI_VALUE / PLLI2SM) * PLLI2SN - 48M Domain clock = PLLI2S_VCO / PLLI2SQ - */ - plli2ssource = LL_RCC_PLLI2S_GetMainSource(); - - switch (plli2ssource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */ - plli2sinputfreq = HSE_VALUE; - break; - -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - case LL_RCC_PLLI2SSOURCE_PIN: /* External pin input clock used as PLLI2S clock source */ - plli2sinputfreq = EXTERNAL_CLOCK_VALUE; - break; -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */ - default: - plli2sinputfreq = HSI_VALUE; - break; - } - - plli2soutputfreq = __LL_RCC_CALC_PLLI2S_48M_FREQ(plli2sinputfreq, LL_RCC_PLLI2S_GetDivider(), - LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetQ()); - - return plli2soutputfreq; -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_PLLI2S_SUPPORT */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rng.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rng.c deleted file mode 100644 index 333d63c..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rng.c +++ /dev/null @@ -1,111 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rng.c - * @author MCD Application Team - * @brief RNG LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_rng.h" -#include "stm32f4xx_ll_bus.h" - -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (RNG) - -/** @addtogroup RNG_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RNG_LL_Exported_Functions - * @{ - */ - -/** @addtogroup RNG_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize RNG registers (Registers restored to their default values). - * @param RNGx RNG Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RNG registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_RNG_ALL_INSTANCE(RNGx)); - if (RNGx == RNG) - { -#if !defined(RCC_AHB2_SUPPORT) - /* Enable RNG reset state */ - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_RNG); - - /* Release RNG from reset state */ - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_RNG); -#else - /* Enable RNG reset state */ - LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_RNG); - - /* Release RNG from reset state */ - LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_RNG); -#endif /* !RCC_AHB2_SUPPORT */ - } - else - { - status = ERROR; - } - - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rtc.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rtc.c deleted file mode 100644 index f3ee3ce..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rtc.c +++ /dev/null @@ -1,838 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rtc.c - * @author MCD Application Team - * @brief RTC LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_rtc.h" -#include "stm32f4xx_ll_cortex.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RTC) - -/** @addtogroup RTC_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup RTC_LL_Private_Constants - * @{ - */ -/* Default values used for prescaler */ -#define RTC_ASYNCH_PRESC_DEFAULT 0x0000007FU -#define RTC_SYNCH_PRESC_DEFAULT 0x000000FFU - -/* Values used for timeout */ -#define RTC_INITMODE_TIMEOUT 1000U /* 1s when tick set to 1ms */ -#define RTC_SYNCHRO_TIMEOUT 1000U /* 1s when tick set to 1ms */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RTC_LL_Private_Macros - * @{ - */ - -#define IS_LL_RTC_HOURFORMAT(__VALUE__) (((__VALUE__) == LL_RTC_HOURFORMAT_24HOUR) \ - || ((__VALUE__) == LL_RTC_HOURFORMAT_AMPM)) - -#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FU) - -#define IS_LL_RTC_SYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FFFU) - -#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \ - || ((__VALUE__) == LL_RTC_FORMAT_BCD)) - -#define IS_LL_RTC_TIME_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_TIME_FORMAT_AM_OR_24) \ - || ((__VALUE__) == LL_RTC_TIME_FORMAT_PM)) - -#define IS_LL_RTC_HOUR12(__HOUR__) (((__HOUR__) > 0U) && ((__HOUR__) <= 12U)) -#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U) -#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U) -#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U) - -#define IS_LL_RTC_WEEKDAY(__VALUE__) (((__VALUE__) == LL_RTC_WEEKDAY_MONDAY) \ - || ((__VALUE__) == LL_RTC_WEEKDAY_TUESDAY) \ - || ((__VALUE__) == LL_RTC_WEEKDAY_WEDNESDAY) \ - || ((__VALUE__) == LL_RTC_WEEKDAY_THURSDAY) \ - || ((__VALUE__) == LL_RTC_WEEKDAY_FRIDAY) \ - || ((__VALUE__) == LL_RTC_WEEKDAY_SATURDAY) \ - || ((__VALUE__) == LL_RTC_WEEKDAY_SUNDAY)) - -#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= 1U) && ((__DAY__) <= 31U)) - -#define IS_LL_RTC_MONTH(__MONTH__) (((__MONTH__) >= 1U) && ((__MONTH__) <= 12U)) - -#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U) - -#define IS_LL_RTC_ALMA_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMA_MASK_NONE) \ - || ((__VALUE__) == LL_RTC_ALMA_MASK_DATEWEEKDAY) \ - || ((__VALUE__) == LL_RTC_ALMA_MASK_HOURS) \ - || ((__VALUE__) == LL_RTC_ALMA_MASK_MINUTES) \ - || ((__VALUE__) == LL_RTC_ALMA_MASK_SECONDS) \ - || ((__VALUE__) == LL_RTC_ALMA_MASK_ALL)) - -#define IS_LL_RTC_ALMB_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMB_MASK_NONE) \ - || ((__VALUE__) == LL_RTC_ALMB_MASK_DATEWEEKDAY) \ - || ((__VALUE__) == LL_RTC_ALMB_MASK_HOURS) \ - || ((__VALUE__) == LL_RTC_ALMB_MASK_MINUTES) \ - || ((__VALUE__) == LL_RTC_ALMB_MASK_SECONDS) \ - || ((__VALUE__) == LL_RTC_ALMB_MASK_ALL)) - -#define IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) || \ - ((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY)) - -#define IS_LL_RTC_ALMB_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) || \ - ((__SEL__) == LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY)) - -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RTC_LL_Exported_Functions - * @{ - */ - -/** @addtogroup RTC_LL_EF_Init - * @{ - */ - -/** - * @brief De-Initializes the RTC registers to their default reset values. - * @note This function does not reset the RTC Clock source and RTC Backup Data - * registers. - * @param RTCx RTC Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC registers are de-initialized - * - ERROR: RTC registers are not de-initialized - */ -ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx) -{ - ErrorStatus status = ERROR; - - /* Check the parameter */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - - /* Disable the write protection for RTC registers */ - LL_RTC_DisableWriteProtection(RTCx); - - /* Set Initialization mode */ - if (LL_RTC_EnterInitMode(RTCx) != ERROR) - { - /* Reset TR, DR and CR registers */ - LL_RTC_WriteReg(RTCx, TR, 0x00000000U); - LL_RTC_WriteReg(RTCx, WUTR, RTC_WUTR_WUT); - LL_RTC_WriteReg(RTCx, DR, (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); - - /* Reset All CR bits except CR[2:0] */ - LL_RTC_WriteReg(RTCx, CR, (LL_RTC_ReadReg(RTCx, CR) & RTC_CR_WUCKSEL)); - - LL_RTC_WriteReg(RTCx, PRER, (RTC_PRER_PREDIV_A | RTC_SYNCH_PRESC_DEFAULT)); - LL_RTC_WriteReg(RTCx, ALRMAR, 0x00000000U); - LL_RTC_WriteReg(RTCx, ALRMBR, 0x00000000U); - LL_RTC_WriteReg(RTCx, CALR, 0x00000000U); - LL_RTC_WriteReg(RTCx, SHIFTR, 0x00000000U); - LL_RTC_WriteReg(RTCx, ALRMASSR, 0x00000000U); - LL_RTC_WriteReg(RTCx, ALRMBSSR, 0x00000000U); - - /* Reset ISR register and exit initialization mode */ - LL_RTC_WriteReg(RTCx, ISR, 0x00000000U); - - /* Reset Tamper and alternate functions configuration register */ - LL_RTC_WriteReg(RTCx, TAFCR, 0x00000000U); - - /* Wait till the RTC RSF flag is set */ - status = LL_RTC_WaitForSynchro(RTCx); - } - - /* Enable the write protection for RTC registers */ - LL_RTC_EnableWriteProtection(RTCx); - - return status; -} - -/** - * @brief Initializes the RTC registers according to the specified parameters - * in RTC_InitStruct. - * @param RTCx RTC Instance - * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains - * the configuration information for the RTC peripheral. - * @note The RTC Prescaler register is write protected and can be written in - * initialization mode only. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC registers are initialized - * - ERROR: RTC registers are not initialized - */ -ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - assert_param(IS_LL_RTC_HOURFORMAT(RTC_InitStruct->HourFormat)); - assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler)); - assert_param(IS_LL_RTC_SYNCH_PREDIV(RTC_InitStruct->SynchPrescaler)); - - /* Disable the write protection for RTC registers */ - LL_RTC_DisableWriteProtection(RTCx); - - /* Set Initialization mode */ - if (LL_RTC_EnterInitMode(RTCx) != ERROR) - { - /* Set Hour Format */ - LL_RTC_SetHourFormat(RTCx, RTC_InitStruct->HourFormat); - - /* Configure Synchronous and Asynchronous prescaler factor */ - LL_RTC_SetSynchPrescaler(RTCx, RTC_InitStruct->SynchPrescaler); - LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler); - - /* Exit Initialization mode */ - LL_RTC_DisableInitMode(RTCx); - - status = SUCCESS; - } - /* Enable the write protection for RTC registers */ - LL_RTC_EnableWriteProtection(RTCx); - - return status; -} - -/** - * @brief Set each @ref LL_RTC_InitTypeDef field to default value. - * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized. - * @retval None - */ -void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct) -{ - /* Set RTC_InitStruct fields to default values */ - RTC_InitStruct->HourFormat = LL_RTC_HOURFORMAT_24HOUR; - RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT; - RTC_InitStruct->SynchPrescaler = RTC_SYNCH_PRESC_DEFAULT; -} - -/** - * @brief Set the RTC current time. - * @param RTCx RTC Instance - * @param RTC_Format This parameter can be one of the following values: - * @arg @ref LL_RTC_FORMAT_BIN - * @arg @ref LL_RTC_FORMAT_BCD - * @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains - * the time configuration information for the RTC. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Time register is configured - * - ERROR: RTC Time register is not configured - */ -ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - assert_param(IS_LL_RTC_FORMAT(RTC_Format)); - - if (RTC_Format == LL_RTC_FORMAT_BIN) - { - if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) - { - assert_param(IS_LL_RTC_HOUR12(RTC_TimeStruct->Hours)); - assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); - } - else - { - RTC_TimeStruct->TimeFormat = 0x00U; - assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours)); - } - assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes)); - assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds)); - } - else - { - if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) - { - assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); - assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); - } - else - { - RTC_TimeStruct->TimeFormat = 0x00U; - assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); - } - assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes))); - assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))); - } - - /* Disable the write protection for RTC registers */ - LL_RTC_DisableWriteProtection(RTCx); - - /* Set Initialization mode */ - if (LL_RTC_EnterInitMode(RTCx) != ERROR) - { - /* Check the input parameters format */ - if (RTC_Format != LL_RTC_FORMAT_BIN) - { - LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, RTC_TimeStruct->Hours, - RTC_TimeStruct->Minutes, RTC_TimeStruct->Seconds); - } - else - { - LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Hours), - __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Minutes), - __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Seconds)); - } - - /* Exit Initialization mode */ - LL_RTC_DisableInitMode(RTCx); - - /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ - if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) - { - status = LL_RTC_WaitForSynchro(RTCx); - } - else - { - status = SUCCESS; - } - } - /* Enable the write protection for RTC registers */ - LL_RTC_EnableWriteProtection(RTCx); - - return status; -} - -/** - * @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec). - * @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized. - * @retval None - */ -void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct) -{ - /* Time = 00h:00min:00sec */ - RTC_TimeStruct->TimeFormat = LL_RTC_TIME_FORMAT_AM_OR_24; - RTC_TimeStruct->Hours = 0U; - RTC_TimeStruct->Minutes = 0U; - RTC_TimeStruct->Seconds = 0U; -} - -/** - * @brief Set the RTC current date. - * @param RTCx RTC Instance - * @param RTC_Format This parameter can be one of the following values: - * @arg @ref LL_RTC_FORMAT_BIN - * @arg @ref LL_RTC_FORMAT_BCD - * @param RTC_DateStruct pointer to a RTC_DateTypeDef structure that contains - * the date configuration information for the RTC. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Day register is configured - * - ERROR: RTC Day register is not configured - */ -ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - assert_param(IS_LL_RTC_FORMAT(RTC_Format)); - - if ((RTC_Format == LL_RTC_FORMAT_BIN) && ((RTC_DateStruct->Month & 0x10U) == 0x10U)) - { - RTC_DateStruct->Month = (uint8_t)(RTC_DateStruct->Month & (uint8_t)~(0x10U)) + 0x0AU; - } - if (RTC_Format == LL_RTC_FORMAT_BIN) - { - assert_param(IS_LL_RTC_YEAR(RTC_DateStruct->Year)); - assert_param(IS_LL_RTC_MONTH(RTC_DateStruct->Month)); - assert_param(IS_LL_RTC_DAY(RTC_DateStruct->Day)); - } - else - { - assert_param(IS_LL_RTC_YEAR(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Year))); - assert_param(IS_LL_RTC_MONTH(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Month))); - assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Day))); - } - assert_param(IS_LL_RTC_WEEKDAY(RTC_DateStruct->WeekDay)); - - /* Disable the write protection for RTC registers */ - LL_RTC_DisableWriteProtection(RTCx); - - /* Set Initialization mode */ - if (LL_RTC_EnterInitMode(RTCx) != ERROR) - { - /* Check the input parameters format */ - if (RTC_Format != LL_RTC_FORMAT_BIN) - { - LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, RTC_DateStruct->Day, RTC_DateStruct->Month, RTC_DateStruct->Year); - } - else - { - LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Day), - __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Month), __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Year)); - } - - /* Exit Initialization mode */ - LL_RTC_DisableInitMode(RTCx); - - /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ - if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) - { - status = LL_RTC_WaitForSynchro(RTCx); - } - else - { - status = SUCCESS; - } - } - /* Enable the write protection for RTC registers */ - LL_RTC_EnableWriteProtection(RTCx); - - return status; -} - -/** - * @brief Set each @ref LL_RTC_DateTypeDef field to default value (date = Monday, January 01 xx00) - * @param RTC_DateStruct pointer to a @ref LL_RTC_DateTypeDef structure which will be initialized. - * @retval None - */ -void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct) -{ - /* Monday, January 01 xx00 */ - RTC_DateStruct->WeekDay = LL_RTC_WEEKDAY_MONDAY; - RTC_DateStruct->Day = 1U; - RTC_DateStruct->Month = LL_RTC_MONTH_JANUARY; - RTC_DateStruct->Year = 0U; -} - -/** - * @brief Set the RTC Alarm A. - * @note The Alarm register can only be written when the corresponding Alarm - * is disabled (Use @ref LL_RTC_ALMA_Disable function). - * @param RTCx RTC Instance - * @param RTC_Format This parameter can be one of the following values: - * @arg @ref LL_RTC_FORMAT_BIN - * @arg @ref LL_RTC_FORMAT_BCD - * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that - * contains the alarm configuration parameters. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: ALARMA registers are configured - * - ERROR: ALARMA registers are not configured - */ -ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) -{ - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - assert_param(IS_LL_RTC_FORMAT(RTC_Format)); - assert_param(IS_LL_RTC_ALMA_MASK(RTC_AlarmStruct->AlarmMask)); - assert_param(IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); - - if (RTC_Format == LL_RTC_FORMAT_BIN) - { - if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) - { - assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); - assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); - } - else - { - RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); - } - assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); - assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); - - if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) - { - assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); - } - else - { - assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); - } - } - else - { - if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) - { - assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); - assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); - } - else - { - RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); - } - - assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); - assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); - - if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) - { - assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); - } - else - { - assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); - } - } - - /* Disable the write protection for RTC registers */ - LL_RTC_DisableWriteProtection(RTCx); - - /* Select weekday selection */ - if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) - { - /* Set the date for ALARM */ - LL_RTC_ALMA_DisableWeekday(RTCx); - if (RTC_Format != LL_RTC_FORMAT_BIN) - { - LL_RTC_ALMA_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); - } - else - { - LL_RTC_ALMA_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); - } - } - else - { - /* Set the week day for ALARM */ - LL_RTC_ALMA_EnableWeekday(RTCx); - LL_RTC_ALMA_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); - } - - /* Configure the Alarm register */ - if (RTC_Format != LL_RTC_FORMAT_BIN) - { - LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, - RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); - } - else - { - LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, - __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), - __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), - __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); - } - /* Set ALARM mask */ - LL_RTC_ALMA_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); - - /* Enable the write protection for RTC registers */ - LL_RTC_EnableWriteProtection(RTCx); - - return SUCCESS; -} - -/** - * @brief Set the RTC Alarm B. - * @note The Alarm register can only be written when the corresponding Alarm - * is disabled (@ref LL_RTC_ALMB_Disable function). - * @param RTCx RTC Instance - * @param RTC_Format This parameter can be one of the following values: - * @arg @ref LL_RTC_FORMAT_BIN - * @arg @ref LL_RTC_FORMAT_BCD - * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that - * contains the alarm configuration parameters. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: ALARMB registers are configured - * - ERROR: ALARMB registers are not configured - */ -ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) -{ - /* Check the parameters */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - assert_param(IS_LL_RTC_FORMAT(RTC_Format)); - assert_param(IS_LL_RTC_ALMB_MASK(RTC_AlarmStruct->AlarmMask)); - assert_param(IS_LL_RTC_ALMB_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); - - if (RTC_Format == LL_RTC_FORMAT_BIN) - { - if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) - { - assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); - assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); - } - else - { - RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); - } - assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); - assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); - - if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) - { - assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); - } - else - { - assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); - } - } - else - { - if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) - { - assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); - assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); - } - else - { - RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; - assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); - } - - assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); - assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); - - if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) - { - assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); - } - else - { - assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); - } - } - - /* Disable the write protection for RTC registers */ - LL_RTC_DisableWriteProtection(RTCx); - - /* Select weekday selection */ - if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) - { - /* Set the date for ALARM */ - LL_RTC_ALMB_DisableWeekday(RTCx); - if (RTC_Format != LL_RTC_FORMAT_BIN) - { - LL_RTC_ALMB_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); - } - else - { - LL_RTC_ALMB_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); - } - } - else - { - /* Set the week day for ALARM */ - LL_RTC_ALMB_EnableWeekday(RTCx); - LL_RTC_ALMB_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); - } - - /* Configure the Alarm register */ - if (RTC_Format != LL_RTC_FORMAT_BIN) - { - LL_RTC_ALMB_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, - RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); - } - else - { - LL_RTC_ALMB_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, - __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), - __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), - __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); - } - /* Set ALARM mask */ - LL_RTC_ALMB_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); - - /* Enable the write protection for RTC registers */ - LL_RTC_EnableWriteProtection(RTCx); - - return SUCCESS; -} - -/** - * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / - * Day = 1st day of the month/Mask = all fields are masked). - * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. - * @retval None - */ -void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) -{ - /* Alarm Time Settings : Time = 00h:00mn:00sec */ - RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMA_TIME_FORMAT_AM; - RTC_AlarmStruct->AlarmTime.Hours = 0U; - RTC_AlarmStruct->AlarmTime.Minutes = 0U; - RTC_AlarmStruct->AlarmTime.Seconds = 0U; - - /* Alarm Day Settings : Day = 1st day of the month */ - RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMA_DATEWEEKDAYSEL_DATE; - RTC_AlarmStruct->AlarmDateWeekDay = 1U; - - /* Alarm Masks Settings : Mask = all fields are not masked */ - RTC_AlarmStruct->AlarmMask = LL_RTC_ALMA_MASK_NONE; -} - -/** - * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / - * Day = 1st day of the month/Mask = all fields are masked). - * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. - * @retval None - */ -void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) -{ - /* Alarm Time Settings : Time = 00h:00mn:00sec */ - RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMB_TIME_FORMAT_AM; - RTC_AlarmStruct->AlarmTime.Hours = 0U; - RTC_AlarmStruct->AlarmTime.Minutes = 0U; - RTC_AlarmStruct->AlarmTime.Seconds = 0U; - - /* Alarm Day Settings : Day = 1st day of the month */ - RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMB_DATEWEEKDAYSEL_DATE; - RTC_AlarmStruct->AlarmDateWeekDay = 1U; - - /* Alarm Masks Settings : Mask = all fields are not masked */ - RTC_AlarmStruct->AlarmMask = LL_RTC_ALMB_MASK_NONE; -} - -/** - * @brief Enters the RTC Initialization mode. - * @note The RTC Initialization mode is write protected, use the - * @ref LL_RTC_DisableWriteProtection before calling this function. - * @param RTCx RTC Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC is in Init mode - * - ERROR: RTC is not in Init mode - */ -ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx) -{ - __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; - ErrorStatus status = SUCCESS; - uint32_t tmp = 0U; - - /* Check the parameter */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - - /* Check if the Initialization mode is set */ - if (LL_RTC_IsActiveFlag_INIT(RTCx) == 0U) - { - /* Set the Initialization mode */ - LL_RTC_EnableInitMode(RTCx); - - /* Wait till RTC is in INIT state and if Time out is reached exit */ - tmp = LL_RTC_IsActiveFlag_INIT(RTCx); - while ((timeout != 0U) && (tmp != 1U)) - { - if (LL_SYSTICK_IsActiveCounterFlag() == 1U) - { - timeout --; - } - tmp = LL_RTC_IsActiveFlag_INIT(RTCx); - if (timeout == 0U) - { - status = ERROR; - } - } - } - return status; -} - -/** - * @brief Exit the RTC Initialization mode. - * @note When the initialization sequence is complete, the calendar restarts - * counting after 4 RTCCLK cycles. - * @note The RTC Initialization mode is write protected, use the - * @ref LL_RTC_DisableWriteProtection before calling this function. - * @param RTCx RTC Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC exited from in Init mode - * - ERROR: Not applicable - */ -ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx) -{ - /* Check the parameter */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - - /* Disable initialization mode */ - LL_RTC_DisableInitMode(RTCx); - - return SUCCESS; -} - -/** - * @brief Waits until the RTC Time and Day registers (RTC_TR and RTC_DR) are - * synchronized with RTC APB clock. - * @note The RTC Resynchronization mode is write protected, use the - * @ref LL_RTC_DisableWriteProtection before calling this function. - * @note To read the calendar through the shadow registers after calendar - * initialization, calendar update or after wakeup from low power modes - * the software must first clear the RSF flag. - * The software must then wait until it is set again before reading - * the calendar, which means that the calendar registers have been - * correctly copied into the RTC_TR and RTC_DR shadow registers. - * @param RTCx RTC Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC registers are synchronised - * - ERROR: RTC registers are not synchronised - */ -ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx) -{ - __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT; - ErrorStatus status = SUCCESS; - uint32_t tmp = 0U; - - /* Check the parameter */ - assert_param(IS_RTC_ALL_INSTANCE(RTCx)); - - /* Clear RSF flag */ - LL_RTC_ClearFlag_RS(RTCx); - - /* Wait the registers to be synchronised */ - tmp = LL_RTC_IsActiveFlag_RS(RTCx); - while ((timeout != 0U) && (tmp != 1U)) - { - if (LL_SYSTICK_IsActiveCounterFlag() == 1U) - { - timeout--; - } - tmp = LL_RTC_IsActiveFlag_RS(RTCx); - if (timeout == 0U) - { - status = ERROR; - } - } - - return (status); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RTC) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ diff --git a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c b/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c deleted file mode 100644 index 34df6ea..0000000 --- a/MCU_STM32F4xx_Matlab/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c +++ /dev/null @@ -1,749 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_utils.c - * @author MCD Application Team - * @brief UTILS LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_utils.h" -#include "stm32f4xx_ll_rcc.h" -#include "stm32f4xx_ll_system.h" -#include "stm32f4xx_ll_pwr.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -/** @addtogroup UTILS_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup UTILS_LL_Private_Constants - * @{ - */ -#if defined(RCC_MAX_FREQUENCY_SCALE1) -#define UTILS_MAX_FREQUENCY_SCALE1 RCC_MAX_FREQUENCY /*!< Maximum frequency for system clock at power scale1, in Hz */ -#endif /*RCC_MAX_FREQUENCY_SCALE1 */ -#define UTILS_MAX_FREQUENCY_SCALE2 RCC_MAX_FREQUENCY_SCALE2 /*!< Maximum frequency for system clock at power scale2, in Hz */ -#if defined(RCC_MAX_FREQUENCY_SCALE3) -#define UTILS_MAX_FREQUENCY_SCALE3 RCC_MAX_FREQUENCY_SCALE3 /*!< Maximum frequency for system clock at power scale3, in Hz */ -#endif /* MAX_FREQUENCY_SCALE3 */ - -/* Defines used for PLL range */ -#define UTILS_PLLVCO_INPUT_MIN RCC_PLLVCO_INPUT_MIN /*!< Frequency min for PLLVCO input, in Hz */ -#define UTILS_PLLVCO_INPUT_MAX RCC_PLLVCO_INPUT_MAX /*!< Frequency max for PLLVCO input, in Hz */ -#define UTILS_PLLVCO_OUTPUT_MIN RCC_PLLVCO_OUTPUT_MIN /*!< Frequency min for PLLVCO output, in Hz */ -#define UTILS_PLLVCO_OUTPUT_MAX RCC_PLLVCO_OUTPUT_MAX /*!< Frequency max for PLLVCO output, in Hz */ - -/* Defines used for HSE range */ -#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */ -#define UTILS_HSE_FREQUENCY_MAX 26000000U /*!< Frequency max for HSE frequency, in Hz */ - -/* Defines used for FLASH latency according to HCLK Frequency */ -#if defined(FLASH_SCALE1_LATENCY1_FREQ) -#define UTILS_SCALE1_LATENCY1_FREQ FLASH_SCALE1_LATENCY1_FREQ /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */ -#endif -#if defined(FLASH_SCALE1_LATENCY2_FREQ) -#define UTILS_SCALE1_LATENCY2_FREQ FLASH_SCALE1_LATENCY2_FREQ /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */ -#endif -#if defined(FLASH_SCALE1_LATENCY3_FREQ) -#define UTILS_SCALE1_LATENCY3_FREQ FLASH_SCALE1_LATENCY3_FREQ /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */ -#endif -#if defined(FLASH_SCALE1_LATENCY4_FREQ) -#define UTILS_SCALE1_LATENCY4_FREQ FLASH_SCALE1_LATENCY4_FREQ /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */ -#endif -#if defined(FLASH_SCALE1_LATENCY5_FREQ) -#define UTILS_SCALE1_LATENCY5_FREQ FLASH_SCALE1_LATENCY5_FREQ /*!< HCLK frequency to set FLASH latency 5 in power scale 1 */ -#endif -#define UTILS_SCALE2_LATENCY1_FREQ FLASH_SCALE2_LATENCY1_FREQ /*!< HCLK frequency to set FLASH latency 1 in power scale 2 */ -#define UTILS_SCALE2_LATENCY2_FREQ FLASH_SCALE2_LATENCY2_FREQ /*!< HCLK frequency to set FLASH latency 2 in power scale 2 */ -#if defined(FLASH_SCALE2_LATENCY3_FREQ) -#define UTILS_SCALE2_LATENCY3_FREQ FLASH_SCALE2_LATENCY3_FREQ /*!< HCLK frequency to set FLASH latency 2 in power scale 2 */ -#endif -#if defined(FLASH_SCALE2_LATENCY4_FREQ) -#define UTILS_SCALE2_LATENCY4_FREQ FLASH_SCALE2_LATENCY4_FREQ /*!< HCLK frequency to set FLASH latency 4 in power scale 2 */ -#endif -#if defined(FLASH_SCALE2_LATENCY5_FREQ) -#define UTILS_SCALE2_LATENCY5_FREQ FLASH_SCALE2_LATENCY5_FREQ /*!< HCLK frequency to set FLASH latency 5 in power scale 2 */ -#endif -#if defined(FLASH_SCALE3_LATENCY1_FREQ) -#define UTILS_SCALE3_LATENCY1_FREQ FLASH_SCALE3_LATENCY1_FREQ /*!< HCLK frequency to set FLASH latency 1 in power scale 3 */ -#endif -#if defined(FLASH_SCALE3_LATENCY2_FREQ) -#define UTILS_SCALE3_LATENCY2_FREQ FLASH_SCALE3_LATENCY2_FREQ /*!< HCLK frequency to set FLASH latency 2 in power scale 3 */ -#endif -#if defined(FLASH_SCALE3_LATENCY3_FREQ) -#define UTILS_SCALE3_LATENCY3_FREQ FLASH_SCALE3_LATENCY3_FREQ /*!< HCLK frequency to set FLASH latency 3 in power scale 3 */ -#endif -#if defined(FLASH_SCALE3_LATENCY4_FREQ) -#define UTILS_SCALE3_LATENCY4_FREQ FLASH_SCALE3_LATENCY4_FREQ /*!< HCLK frequency to set FLASH latency 4 in power scale 3 */ -#endif -#if defined(FLASH_SCALE3_LATENCY5_FREQ) -#define UTILS_SCALE3_LATENCY5_FREQ FLASH_SCALE3_LATENCY5_FREQ /*!< HCLK frequency to set FLASH latency 5 in power scale 3 */ -#endif -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup UTILS_LL_Private_Macros - * @{ - */ -#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) - -#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_16)) - -#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \ - || ((__VALUE__) == LL_RCC_APB2_DIV_2) \ - || ((__VALUE__) == LL_RCC_APB2_DIV_4) \ - || ((__VALUE__) == LL_RCC_APB2_DIV_8) \ - || ((__VALUE__) == LL_RCC_APB2_DIV_16)) - -#define IS_LL_UTILS_PLLM_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLM_DIV_2) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_3) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_4) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_5) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_6) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_7) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_8) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_9) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_10) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_11) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_12) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_13) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_14) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_15) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_16) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_17) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_18) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_19) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_20) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_21) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_22) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_23) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_24) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_25) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_26) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_27) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_28) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_29) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_30) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_31) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_32) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_33) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_34) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_35) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_36) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_37) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_38) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_39) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_40) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_41) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_42) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_43) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_44) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_45) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_46) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_47) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_48) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_49) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_50) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_51) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_52) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_53) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_54) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_55) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_56) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_57) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_58) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_59) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_60) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_61) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_62) \ - || ((__VALUE__) == LL_RCC_PLLM_DIV_63)) - -#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((RCC_PLLN_MIN_VALUE <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLN_MAX_VALUE)) - -#define IS_LL_UTILS_PLLP_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLP_DIV_2) \ - || ((__VALUE__) == LL_RCC_PLLP_DIV_4) \ - || ((__VALUE__) == LL_RCC_PLLP_DIV_6) \ - || ((__VALUE__) == LL_RCC_PLLP_DIV_8)) - -#define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__) ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX)) - -#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX)) - -#if !defined(RCC_MAX_FREQUENCY_SCALE1) -#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2) : \ - ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE3)) - -#elif defined(RCC_MAX_FREQUENCY_SCALE3) -#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \ - (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2) : \ - ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE3)) - -#else -#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \ - ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2)) - -#endif /* RCC_MAX_FREQUENCY_SCALE1*/ -#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ - || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) - -#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup UTILS_LL_Private_Functions UTILS Private functions - * @{ - */ -static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, - LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); -static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); -static ErrorStatus UTILS_PLL_IsBusy(void); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UTILS_LL_Exported_Functions - * @{ - */ - -/** @addtogroup UTILS_LL_EF_DELAY - * @{ - */ - -/** - * @brief This function configures the Cortex-M SysTick source to have 1ms time base. - * @note When a RTOS is used, it is recommended to avoid changing the Systick - * configuration by calling this function, for a delay use rather osDelay RTOS service. - * @param HCLKFrequency HCLK frequency in Hz - * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq - * @retval None - */ -void LL_Init1msTick(uint32_t HCLKFrequency) -{ - /* Use frequency provided in argument */ - LL_InitTick(HCLKFrequency, 1000U); -} - -/** - * @brief This function provides accurate delay (in milliseconds) based - * on SysTick counter flag - * @note When a RTOS is used, it is recommended to avoid using blocking delay - * and use rather osDelay service. - * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which - * will configure Systick to 1ms - * @param Delay specifies the delay time length, in milliseconds. - * @retval None - */ -void LL_mDelay(uint32_t Delay) -{ - __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ - /* Add this code to indicate that local variable is not used */ - ((void)tmp); - - /* Add a period to guaranty minimum wait */ - if(Delay < LL_MAX_DELAY) - { - Delay++; - } - - while (Delay) - { - if((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) - { - Delay--; - } - } -} - -/** - * @} - */ - -/** @addtogroup UTILS_EF_SYSTEM - * @brief System Configuration functions - * - @verbatim - =============================================================================== - ##### System Configuration functions ##### - =============================================================================== - [..] - System, AHB and APB buses clocks configuration - - (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 180000000 Hz. - @endverbatim - @internal - Depending on the device voltage range, the maximum frequency should be - adapted accordingly to the Refenece manual. - @endinternal - * @{ - */ - -/** - * @brief This function sets directly SystemCoreClock CMSIS variable. - * @note Variable can be calculated also through SystemCoreClockUpdate function. - * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) - * @retval None - */ -void LL_SetSystemCoreClock(uint32_t HCLKFrequency) -{ - /* HCLK clock frequency */ - SystemCoreClock = HCLKFrequency; -} - -/** - * @brief Update number of Flash wait states in line with new frequency and current - voltage range. - * @note This Function support ONLY devices with supply voltage (voltage range) between 2.7V and 3.6V - * @param HCLK_Frequency HCLK frequency - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Latency has been modified - * - ERROR: Latency cannot be modified - */ -ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency) -{ - uint32_t timeout; - uint32_t getlatency; - uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ - ErrorStatus status = SUCCESS; - - - /* Frequency cannot be equal to 0 */ - if(HCLK_Frequency == 0U) - { - status = ERROR; - } - else - { - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) - { -#if defined (UTILS_SCALE1_LATENCY5_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY5_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_5; - } -#endif /*UTILS_SCALE1_LATENCY5_FREQ */ -#if defined (UTILS_SCALE1_LATENCY4_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY4_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_4; - } -#endif /* UTILS_SCALE1_LATENCY4_FREQ */ -#if defined (UTILS_SCALE1_LATENCY3_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_3; - } -#endif /* UTILS_SCALE1_LATENCY3_FREQ */ -#if defined (UTILS_SCALE1_LATENCY2_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_2; - } - else - { - if((HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_1; - } - } -#endif /* UTILS_SCALE1_LATENCY2_FREQ */ - } - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) - { -#if defined (UTILS_SCALE2_LATENCY5_FREQ) - if((HCLK_Frequency > UTILS_SCALE2_LATENCY5_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_5; - } -#endif /*UTILS_SCALE1_LATENCY5_FREQ */ -#if defined (UTILS_SCALE2_LATENCY4_FREQ) - if((HCLK_Frequency > UTILS_SCALE2_LATENCY4_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_4; - } -#endif /*UTILS_SCALE1_LATENCY4_FREQ */ -#if defined (UTILS_SCALE2_LATENCY3_FREQ) - if((HCLK_Frequency > UTILS_SCALE2_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_3; - } -#endif /*UTILS_SCALE1_LATENCY3_FREQ */ - if((HCLK_Frequency > UTILS_SCALE2_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_2; - } - else - { - if((HCLK_Frequency > UTILS_SCALE2_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_1; - } - } - } -#if defined (LL_PWR_REGU_VOLTAGE_SCALE3) - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE3) - { -#if defined (UTILS_SCALE3_LATENCY3_FREQ) - if((HCLK_Frequency > UTILS_SCALE3_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_3; - } -#endif /*UTILS_SCALE1_LATENCY3_FREQ */ -#if defined (UTILS_SCALE3_LATENCY2_FREQ) - if((HCLK_Frequency > UTILS_SCALE3_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_2; - } - else - { - if((HCLK_Frequency > UTILS_SCALE3_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_1; - } - } - } -#endif /*UTILS_SCALE1_LATENCY2_FREQ */ -#endif /* LL_PWR_REGU_VOLTAGE_SCALE3 */ - - LL_FLASH_SetLatency(latency); - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - timeout = 2; - do - { - /* Wait for Flash latency to be updated */ - getlatency = LL_FLASH_GetLatency(); - timeout--; - } while ((getlatency != latency) && (timeout > 0)); - - if(getlatency != latency) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - return status; -} - -/** - * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL - * @note The application need to ensure that PLL is disabled. - * @note Function is based on the following formula: - * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLP) - * - PLLM: ensure that the VCO input frequency ranges from @ref RCC_PLLVCO_INPUT_MIN to @ref RCC_PLLVCO_INPUT_MAX (PLLVCO_input = HSI frequency / PLLM) - * - PLLN: ensure that the VCO output frequency is between @ref RCC_PLLVCO_OUTPUT_MIN and @ref RCC_PLLVCO_OUTPUT_MAX (PLLVCO_output = PLLVCO_input * PLLN) - * - PLLP: ensure that max frequency at 180000000 Hz is reach (PLLVCO_output / PLLP) - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Max frequency configuration done - * - ERROR: Max frequency configuration not done - */ -ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, - LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t pllfreq = 0U; - - /* Check if one of the PLL is enabled */ - if(UTILS_PLL_IsBusy() == SUCCESS) - { - /* Calculate the new PLL output frequency */ - pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); - - /* Enable HSI if not enabled */ - if(LL_RCC_HSI_IsReady() != 1U) - { - LL_RCC_HSI_Enable(); - while (LL_RCC_HSI_IsReady() != 1U) - { - /* Wait for HSI ready */ - } - } - - /* Configure PLL */ - LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, - UTILS_PLLInitStruct->PLLP); - - /* Enable PLL and switch system clock to PLL */ - status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); - } - else - { - /* Current PLL configuration cannot be modified */ - status = ERROR; - } - - return status; -} - -/** - * @brief This function configures system clock with HSE as clock source of the PLL - * @note The application need to ensure that PLL is disabled. - * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLP) - * - PLLM: ensure that the VCO input frequency ranges from @ref RCC_PLLVCO_INPUT_MIN to @ref RCC_PLLVCO_INPUT_MAX (PLLVCO_input = HSI frequency / PLLM) - * - PLLN: ensure that the VCO output frequency is between @ref RCC_PLLVCO_OUTPUT_MIN and @ref RCC_PLLVCO_OUTPUT_MAX (PLLVCO_output = PLLVCO_input * PLLN) - * - PLLP: ensure that max frequency at 180000000 Hz is reach (PLLVCO_output / PLLP) - * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 26000000 - * @param HSEBypass This parameter can be one of the following values: - * @arg @ref LL_UTILS_HSEBYPASS_ON - * @arg @ref LL_UTILS_HSEBYPASS_OFF - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Max frequency configuration done - * - ERROR: Max frequency configuration not done - */ -ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, - LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t pllfreq = 0U; - - /* Check the parameters */ - assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); - assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); - - /* Check if one of the PLL is enabled */ - if(UTILS_PLL_IsBusy() == SUCCESS) - { - /* Calculate the new PLL output frequency */ - pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); - - /* Enable HSE if not enabled */ - if(LL_RCC_HSE_IsReady() != 1U) - { - /* Check if need to enable HSE bypass feature or not */ - if(HSEBypass == LL_UTILS_HSEBYPASS_ON) - { - LL_RCC_HSE_EnableBypass(); - } - else - { - LL_RCC_HSE_DisableBypass(); - } - - /* Enable HSE */ - LL_RCC_HSE_Enable(); - while (LL_RCC_HSE_IsReady() != 1U) - { - /* Wait for HSE ready */ - } - } - - /* Configure PLL */ - LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, - UTILS_PLLInitStruct->PLLP); - - /* Enable PLL and switch system clock to PLL */ - status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); - } - else - { - /* Current PLL configuration cannot be modified */ - status = ERROR; - } - - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup UTILS_LL_Private_Functions - * @{ - */ -/** - * @brief Function to check that PLL can be modified - * @param PLL_InputFrequency PLL input frequency (in Hz) - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @retval PLL output frequency (in Hz) - */ -static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) -{ - uint32_t pllfreq = 0U; - - /* Check the parameters */ - assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); - assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); - assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP)); - - /* Check different PLL parameters according to RM */ - /* - PLLM: ensure that the VCO input frequency ranges from @ref UTILS_PLLVCO_INPUT_MIN to @ref UTILS_PLLVCO_INPUT_MAX MHz. */ - pllfreq = PLL_InputFrequency / (UTILS_PLLInitStruct->PLLM & (RCC_PLLCFGR_PLLM >> RCC_PLLCFGR_PLLM_Pos)); - assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq)); - - /* - PLLN: ensure that the VCO output frequency is between @ref UTILS_PLLVCO_OUTPUT_MIN and @ref UTILS_PLLVCO_OUTPUT_MAX .*/ - pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos)); - assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq)); - - /* - PLLP: ensure that max frequency at @ref RCC_MAX_FREQUENCY Hz is reached */ - pllfreq = pllfreq / (((UTILS_PLLInitStruct->PLLP >> RCC_PLLCFGR_PLLP_Pos) + 1) * 2); - assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); - - return pllfreq; -} - -/** - * @brief Function to check that PLL can be modified - * @retval An ErrorStatus enumeration value: - * - SUCCESS: PLL modification can be done - * - ERROR: PLL is busy - */ -static ErrorStatus UTILS_PLL_IsBusy(void) -{ - ErrorStatus status = SUCCESS; - - /* Check if PLL is busy*/ - if(LL_RCC_PLL_IsReady() != 0U) - { - /* PLL configuration cannot be modified */ - status = ERROR; - } - -#if defined(RCC_PLLSAI_SUPPORT) - /* Check if PLLSAI is busy*/ - if(LL_RCC_PLLSAI_IsReady() != 0U) - { - /* PLLSAI1 configuration cannot be modified */ - status = ERROR; - } -#endif /*RCC_PLLSAI_SUPPORT*/ -#if defined(RCC_PLLI2S_SUPPORT) - /* Check if PLLI2S is busy*/ - if(LL_RCC_PLLI2S_IsReady() != 0U) - { - /* PLLI2S configuration cannot be modified */ - status = ERROR; - } -#endif /*RCC_PLLI2S_SUPPORT*/ - return status; -} - -/** - * @brief Function to enable PLL and switch system clock to PLL - * @param SYSCLK_Frequency SYSCLK frequency - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: No problem to switch system to PLL - * - ERROR: Problem to switch system to PLL - */ -static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t hclk_frequency = 0U; - - assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); - assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); - assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider)); - - /* Calculate HCLK frequency */ - hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider); - - /* Increasing the number of wait states because of higher CPU frequency */ - if(SystemCoreClock < hclk_frequency) - { - /* Set FLASH latency to highest latency */ - status = LL_SetFlashLatency(hclk_frequency); - } - - /* Update system clock configuration */ - if(status == SUCCESS) - { - /* Enable PLL */ - LL_RCC_PLL_Enable(); - while (LL_RCC_PLL_IsReady() != 1U) - { - /* Wait for PLL ready */ - } - - /* Sysclk activation on the main PLL */ - LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); - LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); - while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) - { - /* Wait for system clock switch to PLL */ - } - - /* Set APB1 & APB2 prescaler*/ - LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); - LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider); - } - - /* Decreasing the number of wait states because of lower CPU frequency */ - if(SystemCoreClock > hclk_frequency) - { - /* Set FLASH latency to lowest latency */ - status = LL_SetFlashLatency(hclk_frequency); - } - - /* Update SystemCoreClock variable */ - if(status == SUCCESS) - { - LL_SetSystemCoreClock(hclk_frequency); - } - - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.c b/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.c deleted file mode 100644 index a2bd1b6..0000000 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.c +++ /dev/null @@ -1,81 +0,0 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab_gpio.c -* @brief Исходный код симулятора портов. -************************************************************************** -@details -Данный файл содержит функции для симуляции портов STM32F407xx. -**************************************************************************/ -#include "stm32f4xx_matlab_gpio.h" -#include "modbus.h" - -/** - * @brief Запись буфера выходов S-Function из GPIO. - * @param out_buff - указатель на буфер выходов S-Function. - * @details Функция для записи буфера выходов S-Function из GPIO. - После в @ref SIM_writeOutputs() из out_buff формируются выходы S-Function. - - * @attention Тело функции пишется пользователем! - */ -void GPIO_to_SFUNC(real_T* out_buff) -{ - for (int i = 0; i < PORT_WIDTH; i++) - { - if (GPIOB->ODR & (1 << i)) - { - out_buff[i] = 1; - } - - if (GPIOD->ODR & (1 << i)) - { - out_buff[PORT_WIDTH + i] = 1; - } - - if (GPIOE->ODR & (1 << i)) - { - out_buff[2*PORT_WIDTH + i] = 1; - } - } -} - -/** - * @brief Считывание входов S-Function в МК. - * @param out_buff - указатель на буфер выходов S-Function. - * @details Функция для считывания входов S-Function в МК. - Можно абстрагироваться от считывания в GPIO и записывать напрямую в переменные МК. - - * @attention Тело функции пишется пользователем! - */ -void SFUNC_to_GPIO(real_T* in) -{ - // write pwm ctrl registers - for (int i = 0; i < 5; i++) - { - pwm_ctrl[i] = in[i]; - } - // write pwm ctrl coils - if (in[5] > 0.5) - { - MB_Set_Coil_Local(coils_regs, COIL_PWM_DC_MODE); - } - else - { - MB_Reset_Coil_Local(coils_regs, COIL_PWM_DC_MODE); - } - if (in[6] > 0.5) - { - MB_Set_Coil_Local(coils_regs, COIL_PWM_CH_MODE); - } - else - { - MB_Reset_Coil_Local(coils_regs, COIL_PWM_CH_MODE); - } - if (in[7] > 0.5) - { - MB_Set_Coil_Local(coils_regs, COIL_PWM_PHASE_MODE); - } - else - { - MB_Reset_Coil_Local(coils_regs, COIL_PWM_PHASE_MODE); - } -} \ No newline at end of file diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.h b/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.h deleted file mode 100644 index 10f7784..0000000 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_gpio.h +++ /dev/null @@ -1,32 +0,0 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab_gpio.h -* @brief Заголовочный файл для симулятора портов. -************************************************************************** -@details -Данный файл содержит объявления всякого для симуляции портов STM32F407xx. -**************************************************************************/ -#ifndef _MATLAB_GPIO_H_ -#define _MATLAB_GPIO_H_ - -#include "stm32f4xx_hal.h" -#include "simstruc.h" -#include "mcu_wrapper_conf.h" - -/** - * @addtogroup GPIO_SIMULATOR GPIO Simulator - * @ingroup MAIN_SIMULATOR - * @brief Симулятор для портов ввода-вывода - * @details Определяет взаимодействие портов МК и оболочки (S-Function) - * @{ - */ - -/* Функция для записи буфера выходов S-Function из GPIO */ -void SFUNC_to_GPIO(real_T* out_buff); -/* Функция для считывания входов S-Function в МК */ -void GPIO_to_SFUNC(real_T* in); - -/** GPIO_SIMULATOR - * @} - */ -#endif // _MATLAB_GPIO_H_ \ No newline at end of file diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.c b/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.c deleted file mode 100644 index 405822f..0000000 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.c +++ /dev/null @@ -1,8 +0,0 @@ -/* -************************************************************************** -* @file stm32f4xx_matlab_rcc.c -* @brief . -************************************************************************** -@details - STM32F407xx. -**************************************************************************/ diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.h b/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.h deleted file mode 100644 index bb7974e..0000000 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_rcc.h +++ /dev/null @@ -1,58 +0,0 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab_rcc.h -* @brief Заголовочный файл для симулятора клока. -************************************************************************** -@details -Данный файл содержит объявления всякого для симуляции клока STM32F407xx. -**************************************************************************/ -#ifndef _MATLAB_RCC_H_ -#define _MATLAB_RCC_H_ - -#include "mcu_wrapper_conf.h" - -/** - * @addtogroup RCC_SIMULATOR RCC Simulator - * @ingroup MAIN_SIMULATOR - * @brief Симулятор для RCC и часов таймера - * @details Определ¤ет параметры тактирования МК. - Содержит дефайны дл¤ скипа бесконечных циклов ожидающих выставление флагов - * @{ - */ - - -//#define SYSLCK_Value ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) -//#define AHB_Prescaler ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) -//#define AHB_Prescaler ((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos) - -#define HCLK_Value (double)72000000; -#define ABP1_Value (double)72000000; -#define ABP1_TIMS_Value (double)72000000; -#define ABP2_Value (double)72000000; -#define ABP2_TIMS_Value (double)72000000; - -/* Эти дефайны добавлены в код stm32f4xx_hal_rcc.c, чтобы не попасть в бесконечный цикл */ -/* Мб перенести в MCU_Periph_Simulation(), но чет не хочется нагружать симуляцию этой херней */ -#define _RCC_SET_FLAG(__FLAG__) \ -if(((__FLAG__) >> 5U) == 1U) RCC->CR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)); \ -else if(((__FLAG__) >> 5U) == 2U) RCC->BDCR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)); \ -else if(((__FLAG__) >> 5U) == 3U) RCC->CSR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)); \ -else RCC->CIR |= (1U << ((__FLAG__) & RCC_FLAG_MASK)) - -#define _RCC_CLEAR_FLAG(__FLAG__) \ -if(((__FLAG__) >> 5U) == 1U) RCC->CR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)); \ -else if(((__FLAG__) >> 5U) == 2U) RCC->BDCR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)); \ -else if(((__FLAG__) >> 5U) == 3U) RCC->CSR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)); \ -else RCC->CIR &= ~(1U << ((__FLAG__) & RCC_FLAG_MASK)) - -#define Set_Flag_If_Its_Expected(_flag_, _condition_) \ -if(_condition_) _RCC_CLEAR_FLAG(_flag_) - -#define Clear_Flag_If_Its_Expected(_flag_, _condition_) \ -if(_condition_) _RCC_SET_FLAG(_flag_) - -/** RCC_SIMULATOR - * @} - */ - -#endif // _MATLAB_RCC_H_ \ No newline at end of file diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.h b/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.h deleted file mode 100644 index 9b200f8..0000000 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.h +++ /dev/null @@ -1,158 +0,0 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab_tim.h -* @brief Заголовочный файл для симулятора таймеров. -************************************************************************** -@details -Данный файл содержит объявления всякого для симуляции таймеров STM32F407xx. -**************************************************************************/ -#ifndef _MATLAB_TIM_H_ -#define _MATLAB_TIM_H_ - -#include "stm32f4xx_hal.h" -#include "stm32f4xx_it.h" -#include "mcu_wrapper_conf.h" - -/** - * @addtogroup TIM_SIMULATOR TIM Simulator - * @ingroup MAIN_SIMULATOR - * @brief Симулятор для таймеров - * @details Дефайны и функции для симуляции таймеров. - * @{ - */ - -/////////////////////////////---DEFINES---///////////////////////////// -/** - * @brief Дефайн для сдвига между первой и второй половиной CCMRx регистров - */ -#define TIM_OCMODE_SECOND_SHIFT (TIM_CCMR1_OC2M_Pos - TIM_CCMR1_OC1M_Pos) - -/** - * @brief Дефайн для проверки выводить ли канал таймера на GPIO - * @details Данный дефайн проверяет, настроен ли пин GPIO на альтернативную функцию. Если да - то таймер выводиться на этот пин - */ -#define Check_OCx_GPIO_Output(_tims_, _OCx_GPIOx_, _OCx_PIN_SHIFT_) (_tims_->Channels._OCx_GPIOx_->MODER & (0b11<<(2*_tims_->Channels._OCx_PIN_SHIFT_))) == (0b10<<(2*_tims_->Channels._OCx_PIN_SHIFT_)) -/** - * @brief Дефайн для проверки выводить ли канал 1 на GPIO (настроен ли GPIO на альтернативную функцию) - */ -#define Check_OC1_GPIO_Output(_tims_) Check_OCx_GPIO_Output(_tims_, OC1_GPIOx, OC1_PIN_SHIFT) -/** - * @brief Дефайн для проверки выводить ли канал 2 на GPIO (настроен ли GPIO на альтернативную функцию) - */ -#define Check_OC2_GPIO_Output(_tims_) Check_OCx_GPIO_Output(_tims_, OC2_GPIOx, OC2_PIN_SHIFT) -/** - * @brief Дефайн для проверки выводить ли канал 3 на GPIO (настроен ли GPIO на альтернативную функцию) - */ -#define Check_OC3_GPIO_Output(_tims_) Check_OCx_GPIO_Output(_tims_, OC3_GPIOx, OC3_PIN_SHIFT) -/** - * @brief Дефайн для проверки выводить ли канал 4 на GPIO (настроен ли GPIO на альтернативную функцию) - */ -#define Check_OC4_GPIO_Output(_tims_) Check_OCx_GPIO_Output(_tims_, OC4_GPIOx, OC4_PIN_SHIFT) - -///////////////////////////////////////////////////////////////////// - - - -///////////////////////////---STRUCTURES---////////////////////////// -/** - * @brief Структура для управления Слейв Таймерами - */ -struct SlaveChannels -{ - unsigned TIM1_TRGO : 1; ///< Синган синхронизации таймера 1 - unsigned TIM2_TRGO : 1; ///< Синган синхронизации таймера 2 - unsigned TIM3_TRGO : 1; ///< Синган синхронизации таймера 3 - unsigned TIM4_TRGO : 1; ///< Синган синхронизации таймера 4 - unsigned TIM5_TRGO : 1; ///< Синган синхронизации таймера 5 - unsigned TIM6_TRGO : 1; ///< Синган синхронизации таймера 6 - unsigned TIM7_TRGO : 1; ///< Синган синхронизации таймера 7 - unsigned TIM8_TRGO : 1; ///< Синган синхронизации таймера 8 - -}; - -/** - * @brief Структура для моделирования каналов таймера - */ -struct Channels_Sim -{ - // Каналы таймера - unsigned OC1REF:1; ///< Первый канал - unsigned OC2REF:1; ///< Второй канал - unsigned OC3REF:1; ///< Третьий канал - unsigned OC4REF:1; ///< Четвертый канал - - // связанные с каналами GPIO порты и пины - GPIO_TypeDef *OC1_GPIOx; ///< Порт первого канала - uint32_t OC1_PIN_SHIFT; ///< Пин первого канала - - GPIO_TypeDef *OC2_GPIOx; ///< Порт второго канала - uint32_t OC2_PIN_SHIFT; ///< Пин второго канала - - GPIO_TypeDef *OC3_GPIOx; ///< Порт третьего канала - uint32_t OC3_PIN_SHIFT; ///< Пин третьего канала - - GPIO_TypeDef *OC4_GPIOx; ///< Порт четвертого канала - uint32_t OC4_PIN_SHIFT; ///< Пин четвертого канала - -}; - -/** - * @brief Структура для моделирования таймера - */ -struct TIM_Sim -{ - double tx_cnt; ///< Счетчик таймера (double, т.к. кол-во тактов за шаг симуляции может быть дробным) - double tx_step; ///< Шаг счета за один шаг симуляции (double, т.к. кол-во тактов за шаг симуляции может быть дробным) - int RELOAD; ///< Буфер для периода таймера (для реализации функции PRELOAD) - struct Channels_Sim Channels; ///< Структура для симуляции каналов -}; -///////////////////////////////////////////////////////////////////// - - - -///////////////////////////---FUNCTIONS---/////////////////////////// - -//----------------------TIMER BASE FUNCTIONS-----------------------// -/* Базовая функция для симуляции таймера: она вызывается каждый шаг симуляции */ -void TIM_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS); -/* Счет таймера за один такт */ -void TIMx_Count(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -/* Проверка на переполнение и дальнейшая его обработка */ -void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -/* Вызов прерывания */ -void call_IRQHandller(TIM_TypeDef *TIMx); -//-----------------------------------------------------------------// - - -//------------------------CHANNELS FUNCTIONS-----------------------// -/* Симуляция каналов таймера */ -void Channels_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS); -/*---------------- - CAPTURE COPMARE & PWM FUNCTIONS------------------*/ -/* Выбор режима CaptureCompare или PWM и симуляция для каждого канала */ -void CC_PWM_Ch1_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -void CC_PWM_Ch2_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -void CC_PWM_Ch3_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -void CC_PWM_Ch4_Simulation(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -/* Запись каналов таймера в порты GPIO */ -void Write_OC_to_GPIO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -/* Запись результата compare в глабальную структуру с TRIGGER OUTPUT */ -void Write_OC_to_TRGO(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS); -//------------------------------------------------------------------// - - -//--------------------MISC (temporary) FUNCTIONS--------------------// -/* Определение источника для запуска таймера в SLAVE MODE */ -void Slave_Mode_Check_Source(TIM_TypeDef* TIMx); -//------------------------------------------------------------------// - - -//------------------------SIMULINK FUNCTIONS------------------------// -// Симулирование выбранных таймеров -void Simulate_TIMs(void); -// Деинициализирование выбранных таймеров (вызывается в конце симуляции) -void TIM_SIM_DEINIT(void); -//------------------------------------------------------------------// -/** TIM_SIMULATOR - * @} - */ -#endif // _MATLAB_TIM_H_ diff --git a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_periph_registers.c b/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_periph_registers.c deleted file mode 100644 index cef125e..0000000 --- a/MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_periph_registers.c +++ /dev/null @@ -1,126 +0,0 @@ -/** -************************************************************************** -* @dir ../MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK -* @brief -* Папка с исходным кодом симулятора МК. -* @details -В этой папке содержаться файлы для эмуляции периферии STM32 в MATLAB. -Структура файлов такая же, как в библиотеке HAL: -- название серии МК, который эмулируется (stm32f4xx), -- идентификатор, что это для MATLAB (matlab), -- периферия, функции для эмуляции которой содержит конкретный файл (gpio, tim). - -Пример: "stm32f4xx_matlab_tim.c/.h" -**************************************************************************/ - -/** -************************************************************************** -* @file stm32f4xx_periph_registers.c -* @brief Исходный код с переменными регистров периферии. -************************************************************************** -@details -Данный файл необходим для объявления структур для отображения их в watch -В оригинальном stm32f407xx они объявлены дефайнами, которые не видны в watch. -Поэтому дополнительно объявлены данные структуры. - -Называются также, как CMSISные, только в нижнем регистре. -**************************************************************************/ -#include "stm32f407xx_matlab.h" - -/** - * @addtogroup PERIPH_VARS_FOR_DEBUG Periphs Variables for Debugging - * @ingroup STM_SIMULATION - * @brief Переменные для доступа к периферии в дебаге - * @{ - */ - - -TIM_TypeDef* tim2 = TIM2; -TIM_TypeDef* tim3 = TIM3; -TIM_TypeDef* tim4 = TIM4; -TIM_TypeDef* tim5 = TIM5; -TIM_TypeDef* tim6 = TIM6; -TIM_TypeDef* tim7 = TIM7; -TIM_TypeDef* tim12 = TIM12; -TIM_TypeDef* tim13 = TIM13; -TIM_TypeDef* tim14 = TIM14; -RTC_TypeDef* rtc = RTC; -WWDG_TypeDef* wwdg = WWDG; -IWDG_TypeDef* iwdg = IWDG; -SPI_TypeDef* i2s2ext = I2S2ext; -SPI_TypeDef* spi2 = SPI2; -SPI_TypeDef* spi3 = SPI3; -SPI_TypeDef* i2s3ext = I2S3ext; -USART_TypeDef* usart2 = USART2; -USART_TypeDef* usart3 = USART3; -USART_TypeDef* uart4 = UART4; -USART_TypeDef* uart5 = UART5; -I2C_TypeDef* i2c1 = I2C1; -I2C_TypeDef* i2c2 = I2C2; -I2C_TypeDef* i2c3 = I2C3; -CAN_TypeDef* can1 = CAN1; -CAN_TypeDef* can2 = CAN2; -PWR_TypeDef* pwr = PWR; -DAC_TypeDef* dac1 = DAC1; -DAC_TypeDef* dac = DAC; /* Kept for legacy purpose = DAC */ -TIM_TypeDef* tim1 = TIM1; -TIM_TypeDef* tim8 = TIM8; -USART_TypeDef* usart1 = USART1; -USART_TypeDef* usart6 = USART6; -ADC_TypeDef* adc1 = ADC1; -ADC_TypeDef* adc2 = ADC2; -ADC_TypeDef* adc3 = ADC3; -ADC_Common_TypeDef* adc123_common = ADC123_COMMON; /* Legacy define */ -ADC_Common_TypeDef* adc = ADC123_COMMON; -SDIO_TypeDef* sdio = SDIO; -SPI_TypeDef* spi1 = SPI1; -SYSCFG_TypeDef* syscfg = SYSCFG; -EXTI_TypeDef* exti = EXTI; -TIM_TypeDef* tim9 = TIM9; -TIM_TypeDef* tim10 = TIM10; -TIM_TypeDef* tim11 = TIM11; -GPIO_TypeDef* gpioa = GPIOA; -GPIO_TypeDef* gpiob = GPIOB; -GPIO_TypeDef* gpioc = GPIOC; -GPIO_TypeDef* gpiod = GPIOD; -GPIO_TypeDef* gpioe = GPIOE; -GPIO_TypeDef* gpiof = GPIOF; -GPIO_TypeDef* gpiog = GPIOG; -GPIO_TypeDef* gpioh = GPIOH; -GPIO_TypeDef* gpioi = GPIOI; -CRC_TypeDef* crc = CRC; -RCC_TypeDef* rcc = RCC; -FLASH_TypeDef* flash_r = FLASH; -DMA_TypeDef* dma1 = DMA1; -DMA_Stream_TypeDef* dma1_stream0 = DMA1_Stream0; -DMA_Stream_TypeDef* dma1_stream1 = DMA1_Stream1; -DMA_Stream_TypeDef* dma1_stream2 = DMA1_Stream2; -DMA_Stream_TypeDef* dma1_stream3 = DMA1_Stream3; -DMA_Stream_TypeDef* dma1_stream4 = DMA1_Stream4; -DMA_Stream_TypeDef* dma1_stream5 = DMA1_Stream5; -DMA_Stream_TypeDef* dma1_stream6 = DMA1_Stream6; -DMA_Stream_TypeDef* dma1_stream7 = DMA1_Stream7; -DMA_TypeDef* dma2 = DMA2; -DMA_Stream_TypeDef* dma2_stream0 = DMA2_Stream0; -DMA_Stream_TypeDef* dma2_stream1 = DMA2_Stream1; -DMA_Stream_TypeDef* dma2_stream2 = DMA2_Stream2; -DMA_Stream_TypeDef* dma2_stream3 = DMA2_Stream3; -DMA_Stream_TypeDef* dma2_stream4 = DMA2_Stream4; -DMA_Stream_TypeDef* dma2_stream5 = DMA2_Stream5; -DMA_Stream_TypeDef* dma2_stream6 = DMA2_Stream6; -DMA_Stream_TypeDef* dma2_stream7 = DMA2_Stream7; -ETH_TypeDef* eth = ETH; -DCMI_TypeDef* dcmi = DCMI; -RNG_TypeDef* rng = RNG; -FSMC_Bank1_TypeDef* fsmc_bank1_r = FSMC_Bank1; -FSMC_Bank1E_TypeDef* fsmc_bank1e_r = FSMC_Bank1E; -FSMC_Bank2_3_TypeDef* fsmc_bank2_3_r = FSMC_Bank2_3; -FSMC_Bank4_TypeDef* fsmc_bank4_r = FSMC_Bank4; -DBGMCU_TypeDef* dbgmcu = DBGMCU; -USB_OTG_GlobalTypeDef* usb_otg_fs_periph = USB_OTG_FS; -USB_OTG_GlobalTypeDef* usb_otg_hs_periph = USB_OTG_HS; - - -/** PERIPH_VARS_FOR_DEBUG - * @} - */ \ No newline at end of file diff --git a/MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.c b/MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.c deleted file mode 100644 index 79f336a..0000000 --- a/MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.c +++ /dev/null @@ -1,347 +0,0 @@ -/** -************************************************************************** -* @file stm32f4xx_matlab_conf.c -* @brief Исходный код для конфигурации симулятора МК. -************************************************************************** -@details -Данный файл настраивает структуры для симуляции периферий, которые выбраны -дефайнами в stm32f4xx_matlab_conf.h. -**************************************************************************/ - -#include "mcu_wrapper_conf.h" - -MCU_MemoryTypeDef MCU_MEM; -MCU_CortexMemoryTypeDef MCU_CORTEX_MEM; -DBGMCU_TypeDef DEBUG_MCU; - -//-----------------------------------------------------------------------// -/*------------------------------FUNCTIONS--------------------------------*/ -/** - * @brief Инициализация периферии симулятора МК. - * @details Эта функция вызывает функции инициализации периферии для симуляции - */ -void Initialize_Periph_Sim(void) -{ - Init_TIM_SIM(); -} -/** - * @brief Деинициализация периферии симулятора МК. - * @details Эта функция вызывает функции деинициализации периферии для последующей симуляции - */ -void deInitialize_Periph_Sim(void) -{ - TIM_SIM_DEINIT(); -} -/** - * @brief Деинициализация симулятора МК. - * @details Эта функция очищает память симулятора МК, чтобы в - следующей симуляции он запускался как в первый раз. - */ -void deInitialize_MCU(void) -{ - // обнуление структуры, управляющей программой МК - memset(&hmcu, 0, sizeof(hmcu)); - // обнуление структур, симулирующих память МК - memset(&MCU_MEM, 0, sizeof(MCU_MEM)); - memset(&MCU_CORTEX_MEM, 0, sizeof(MCU_CORTEX_MEM)); - memset(&DEBUG_MCU, 0, sizeof(DEBUG_MCU)); -} - - -/*------------------------------FUNCTIONS--------------------------------*/ -//-----------------------------------------------------------------------// - -//-----------------------------------------------------------------------// -/*-------------------------------TIMERS----------------------------------*/ -// defines structure for simulate -#ifdef USE_TIM1 -struct TIM_Sim tim1s; -#endif -#ifdef USE_TIM2 -struct TIM_Sim tim2s; -#endif -#ifdef USE_TIM3 -struct TIM_Sim tim3s; -#endif -#ifdef USE_TIM4 -struct TIM_Sim tim4s; -#endif -#ifdef USE_TIM5 -struct TIM_Sim tim5s; -#endif -#ifdef USE_TIM6 -struct TIM_Sim tim6s; -#endif -#ifdef USE_TIM7 -struct TIM_Sim tim7s; -#endif -#ifdef USE_TIM8 -struct TIM_Sim tim8s; -#endif -#ifdef USE_TIM9 -struct TIM_Sim tim9s; -#endif -#ifdef USE_TIM10 -struct TIM_Sim tim10s; -#endif -#ifdef USE_TIM11 -struct TIM_Sim tim11s; -#endif -#ifdef USE_TIM12 -struct TIM_Sim tim12s; -#endif -#ifdef USE_TIM13 -struct TIM_Sim tim13s; -#endif -#ifdef USE_TIM14 -struct TIM_Sim tim14s; -#endif - -/** - * @brief Инициализация таймеров симулятора МК. - * @details Эта функция инициализирует структуры для симуляции таймеров. - * Таймеры для симуляции выбираются дефайнами в stm32f4xx_matlab_conf.h. - */ -void Init_TIM_SIM(void) -{ -#ifdef USE_TIM1 - tim1s.tx_cnt = TIM1->CNT; - tim1s.tx_step = hmcu.SIM_Sample_Time * ABP2_TIMS_Value; - - tim1s.Channels.OC1_GPIOx = GPIOE; - tim1s.Channels.OC1_PIN_SHIFT = 9; - tim1s.Channels.OC2_GPIOx = GPIOE; - tim1s.Channels.OC2_PIN_SHIFT = 11; - tim1s.Channels.OC3_GPIOx = GPIOE; - tim1s.Channels.OC3_PIN_SHIFT = 13; - tim1s.Channels.OC4_GPIOx = GPIOE; - tim1s.Channels.OC4_PIN_SHIFT = 14; - tim1s.Channels.OC1REF = 0; - tim1s.Channels.OC2REF = 0; - tim1s.Channels.OC3REF = 0; - tim1s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM2 - tim2s.tx_cnt = TIM2->CNT; - tim2s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim2s.Channels.OC1_GPIOx = GPIOA; - tim2s.Channels.OC1_PIN_SHIFT = 5; - tim2s.Channels.OC2_GPIOx = GPIOA; - tim2s.Channels.OC2_PIN_SHIFT = 1; - tim2s.Channels.OC3_GPIOx = GPIOA; - tim2s.Channels.OC3_PIN_SHIFT = 2; - tim2s.Channels.OC4_GPIOx = GPIOA; - tim2s.Channels.OC4_PIN_SHIFT = 3; - tim2s.Channels.OC1REF = 0; - tim2s.Channels.OC2REF = 0; - tim2s.Channels.OC3REF = 0; - tim2s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM3 - tim3s.tx_cnt = TIM3->CNT; - tim3s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim3s.Channels.OC1_GPIOx = GPIOA; - tim3s.Channels.OC1_PIN_SHIFT = 6; - tim3s.Channels.OC2_GPIOx = GPIOA; - tim3s.Channels.OC2_PIN_SHIFT = 7; - tim3s.Channels.OC3_GPIOx = GPIOB; - tim3s.Channels.OC3_PIN_SHIFT = 0; - tim3s.Channels.OC4_GPIOx = GPIOB; - tim3s.Channels.OC4_PIN_SHIFT = 1; - tim3s.Channels.OC1REF = 0; - tim3s.Channels.OC2REF = 0; - tim3s.Channels.OC3REF = 0; - tim3s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM4 - tim4s.tx_cnt = TIM4->CNT; - tim4s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim4s.Channels.OC1_GPIOx = GPIOD; - tim4s.Channels.OC1_PIN_SHIFT = 12; - tim4s.Channels.OC2_GPIOx = GPIOD; - tim4s.Channels.OC2_PIN_SHIFT = 13; - tim4s.Channels.OC3_GPIOx = GPIOD; - tim4s.Channels.OC3_PIN_SHIFT = 14; - tim4s.Channels.OC4_GPIOx = GPIOD; - tim4s.Channels.OC4_PIN_SHIFT = 15; - tim4s.Channels.OC1REF = 0; - tim4s.Channels.OC2REF = 0; - tim4s.Channels.OC3REF = 0; - tim4s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM5 - tim5s.tx_cnt = TIM5->CNT; - tim5s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim5s.Channels.OC1_GPIOx = GPIOA; - tim5s.Channels.OC1_PIN_SHIFT = 0; - tim5s.Channels.OC2_GPIOx = GPIOA; - tim5s.Channels.OC2_PIN_SHIFT = 1; - tim5s.Channels.OC3_GPIOx = GPIOA; - tim5s.Channels.OC3_PIN_SHIFT = 2; - tim5s.Channels.OC4_GPIOx = GPIOA; - tim5s.Channels.OC4_PIN_SHIFT = 3; - tim5s.Channels.OC1REF = 0; - tim5s.Channels.OC2REF = 0; - tim5s.Channels.OC3REF = 0; - tim5s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM6 - tim6s.tx_cnt = TIM6->CNT; - tim6s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim6s.Channels.OC1_GPIOx = GPIOA; - tim6s.Channels.OC1_PIN_SHIFT = 6; - tim6s.Channels.OC2_GPIOx = GPIOA; - tim6s.Channels.OC2_PIN_SHIFT = 0; - tim6s.Channels.OC3_GPIOx = GPIOA; - tim6s.Channels.OC3_PIN_SHIFT = 0; - tim6s.Channels.OC4_GPIOx = GPIOA; - tim6s.Channels.OC4_PIN_SHIFT = 0; - tim6s.Channels.OC1REF = 0; - tim6s.Channels.OC2REF = 0; - tim6s.Channels.OC3REF = 0; - tim6s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM7 - tim7s.tx_cnt = TIM7->CNT; - tim7s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim7s.Channels.OC1_GPIOx = GPIOA; - tim7s.Channels.OC1_PIN_SHIFT = 6; - tim7s.Channels.OC2_GPIOx = GPIOA; - tim7s.Channels.OC2_PIN_SHIFT = 0; - tim7s.Channels.OC3_GPIOx = GPIOA; - tim7s.Channels.OC3_PIN_SHIFT = 0; - tim7s.Channels.OC4_GPIOx = GPIOA; - tim7s.Channels.OC4_PIN_SHIFT = 0; - tim7s.Channels.OC1REF = 0; - tim7s.Channels.OC2REF = 0; - tim7s.Channels.OC3REF = 0; - tim7s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM8 - tim8s.tx_cnt = TIM8->CNT; - tim8s.tx_step = hmcu.SIM_Sample_Time * ABP2_TIMS_Value; - - tim8s.Channels.OC1_GPIOx = GPIOA; - tim8s.Channels.OC1_PIN_SHIFT = 6; - tim8s.Channels.OC2_GPIOx = GPIOA; - tim8s.Channels.OC2_PIN_SHIFT = 0; - tim8s.Channels.OC3_GPIOx = GPIOA; - tim8s.Channels.OC3_PIN_SHIFT = 0; - tim8s.Channels.OC4_GPIOx = GPIOA; - tim8s.Channels.OC4_PIN_SHIFT = 0; - tim8s.Channels.OC1REF = 0; - tim8s.Channels.OC2REF = 0; - tim8s.Channels.OC3REF = 0; - tim8s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM9 - tim9s.tx_cnt = TIM9->CNT; - tim9s.tx_step = hmcu.SIM_Sample_Time * ABP2_TIMS_Value; - - tim9s.Channels.OC1_GPIOx = GPIOA; - tim9s.Channels.OC1_PIN_SHIFT = 6; - tim9s.Channels.OC2_GPIOx = GPIOA; - tim9s.Channels.OC2_PIN_SHIFT = 0; - tim9s.Channels.OC3_GPIOx = GPIOA; - tim9s.Channels.OC3_PIN_SHIFT = 0; - tim9s.Channels.OC4_GPIOx = GPIOA; - tim9s.Channels.OC4_PIN_SHIFT = 0; - tim9s.Channels.OC1REF = 0; - tim9s.Channels.OC2REF = 0; - tim9s.Channels.OC3REF = 0; - tim9s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM10 - tim10s.tx_cnt = TIM10->CNT; - tim10s.tx_step = hmcu.SIM_Sample_Time * ABP2_TIMS_Value; - - tim10s.Channels.OC1_GPIOx = GPIOA; - tim10s.Channels.OC1_PIN_SHIFT = 6; - tim10s.Channels.OC2_GPIOx = GPIOA; - tim10s.Channels.OC2_PIN_SHIFT = 0; - tim10s.Channels.OC3_GPIOx = GPIOA; - tim10s.Channels.OC3_PIN_SHIFT = 0; - tim10s.Channels.OC4_GPIOx = GPIOA; - tim10s.Channels.OC4_PIN_SHIFT = 0; - tim10s.Channels.OC1REF = 0; - tim10s.Channels.OC2REF = 0; - tim10s.Channels.OC3REF = 0; - tim10s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM11 - tim11s.tx_cnt = TIM11->CNT; - tim11s.tx_step = hmcu.SIM_Sample_Time * ABP2_TIMS_Value; - - tim11s.Channels.OC1_GPIOx = GPIOA; - tim11s.Channels.OC1_PIN_SHIFT = 6; - tim11s.Channels.OC2_GPIOx = GPIOA; - tim11s.Channels.OC2_PIN_SHIFT = 0; - tim11s.Channels.OC3_GPIOx = GPIOA; - tim11s.Channels.OC3_PIN_SHIFT = 0; - tim11s.Channels.OC4_GPIOx = GPIOA; - tim11s.Channels.OC4_PIN_SHIFT = 0; - tim11s.Channels.OC1REF = 0; - tim11s.Channels.OC2REF = 0; - tim11s.Channels.OC3REF = 0; - tim11s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM12 - tim12s.tx_cnt = TIM12->CNT; - tim12s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim12s.Channels.OC1_GPIOx = GPIOA; - tim12s.Channels.OC1_PIN_SHIFT = 6; - tim12s.Channels.OC2_GPIOx = GPIOA; - tim12s.Channels.OC2_PIN_SHIFT = 0; - tim12s.Channels.OC3_GPIOx = GPIOA; - tim12s.Channels.OC3_PIN_SHIFT = 0; - tim12s.Channels.OC4_GPIOx = GPIOA; - tim12s.Channels.OC4_PIN_SHIFT = 0; - tim12s.Channels.OC1REF = 0; - tim12s.Channels.OC2REF = 0; - tim12s.Channels.OC3REF = 0; - tim12s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM13 - tim13s.tx_cnt = TIM13->CNT; - tim13s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim13s.Channels.OC1_GPIOx = GPIOA; - tim13s.Channels.OC1_PIN_SHIFT = 6; - tim13s.Channels.OC2_GPIOx = GPIOA; - tim13s.Channels.OC2_PIN_SHIFT = 0; - tim13s.Channels.OC3_GPIOx = GPIOA; - tim13s.Channels.OC3_PIN_SHIFT = 0; - tim13s.Channels.OC4_GPIOx = GPIOA; - tim13s.Channels.OC4_PIN_SHIFT = 0; - tim13s.Channels.OC1REF = 0; - tim13s.Channels.OC2REF = 0; - tim13s.Channels.OC3REF = 0; - tim13s.Channels.OC4REF = 0; -#endif -#ifdef USE_TIM14 - tim14s.tx_cnt = TIM14->CNT; - tim14s.tx_step = hmcu.SIM_Sample_Time * ABP1_TIMS_Value; - - tim14s.Channels.OC1_GPIOx = GPIOA; - tim14s.Channels.OC1_PIN_SHIFT = 6; - tim14s.Channels.OC2_GPIOx = GPIOA; - tim14s.Channels.OC2_PIN_SHIFT = 0; - tim14s.Channels.OC3_GPIOx = GPIOA; - tim14s.Channels.OC3_PIN_SHIFT = 0; - tim14s.Channels.OC4_GPIOx = GPIOA; - tim14s.Channels.OC4_PIN_SHIFT = 0; - tim14s.Channels.OC1REF = 0; - tim14s.Channels.OC2REF = 0; - tim14s.Channels.OC3REF = 0; - tim14s.Channels.OC4REF = 0; -#endif -} -/*-------------------------------TIMERS----------------------------------*/ -//-----------------------------------------------------------------------// diff --git a/MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.h b/MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.h deleted file mode 100644 index 37e1439..0000000 --- a/MCU_STM32F4xx_Matlab/stm32f4xx_matlab_conf.h +++ /dev/null @@ -1,161 +0,0 @@ -/** -************************************************************************** -* @dir ../MCU_STM32F4xx_Matlab -* @brief -* Папка с исходным кодом для симуляции МК. -************************************************************************** -@details -В данной папке содержаться модули для симуляции МК в MATLAB: -- Драйверы МК - они переделаны так, чтобы запускаться и работать в MATLAB. -- Симулятор МК - он моделирует работу нужной периферии в MATLAB -**************************************************************************/ - - -/** -************************************************************************** -* @file stm32f4xx_matlab_conf.h -* @brief Заголовочный файл для конфигурации симулятора МК. -************************************************************************** -@details -Здесь задаётся используемая периферия и подключаются библиотеки для периферии. -**************************************************************************/ - -#ifndef _MATLAB_CONF_H_ -#define _MATLAB_CONF_H_ -/** - * @addtogroup STM_SIMULATION STM32 Simulation - * @brief Всякое для симуляции STM32 - */ - -/** - * @addtogroup MAIN_SIMULATOR STM32 Simulator - * @ingroup STM_SIMULATION - * @brief Всякое для симулятора STM32 - * @details Здесь дефайнами задается используемая периферия и - подключаются файлы, необходимые для её симуляции - */ - -/** - * @addtogroup SIMULATOR_CONF Simulator Configuration - * @ingroup MAIN_SIMULATOR - * @brief Параметры конфигурации для симулятора МК - * @details Здесь дефайнами задается периферия для симуляции - * @{ - */ - -// DEFINES (UNCOMMENT WHAT YOU WILL SIMULATE) -// TIMS -#define USE_TIM1 -//#define USE_TIM2 -#define USE_TIM3 -#define USE_TIM4 -//#define USE_TIM5 -//#define USE_TIM6 -#define USE_TIM7 -//#define USE_TIM8 -//#define USE_TIM9 -//#define USE_TIM10 -//#define USE_TIM11 -#define USE_TIM12 -//#define USE_TIM13 -//#define USE_TIM14 - -// TIM'S HANDLERS -//#define USE_TIM1_UP_TIM10_HANDLER -//#define USE_TIM2_HANDLER -//#define USE_TIM3_HANDLER -#define USE_TIM4_HANDLER -//#define USE_TIM5_HANDLER -//#define USE_TIM6_HANDLER -#define USE_TIM7_HANDLER -//#define USE_TIM8_UP_TIM13_HANDLER -//#define USE_TIM1_BRK_TIM9_HANDLER -//#define USE_TIM1_TRG_COM_TIM11_HANDLER -#define USE_TIM8_BRK_TIM12_HANDLER -//#define USE_TIM8_TRG_COM_TIM14_HANDLER - - -/** SIMULATOR_CONF - * @} - */ - - -/** -* @ingroup MAIN_SIMULATOR -* @{ -*/ - -//-----------------------------------------------------------------------// -/*------------------------------FUNCTIONS--------------------------------*/ -// MCU PERIPH INIT -void Initialize_Periph_Sim(void); -// MCU PERIPH DEINIT -void deInitialize_Periph_Sim(void); -// MCU DEINIT -void deInitialize_MCU(void); - - -#include "stm32f4xx_matlab_rcc.h" -#include "stm32f4xx_matlab_gpio.h" - - -//-----------------------------------------------------------------------// -/*-------------------------------TIMERS----------------------------------*/ -//#if defined(USE_TIM1) || defined(USE_TIM2) || defined(USE_TIM3) || defined(USE_TIM4) || defined(USE_TIM5) || \ -// defined(USE_TIM6) || defined(USE_TIM7) || defined(USE_TIM8) || defined(USE_TIM9) || defined(USE_TIM10) || \ -// defined(USE_TIM11) || defined(USE_TIM12) || defined(USE_TIM13) || defined(USE_TIM14) -#include "stm32f4xx_matlab_tim.h" - -// Init timersfor simulation -void Init_TIM_SIM(void); - -#ifdef USE_TIM1 -extern struct TIM_Sim tim1s; -#endif -#ifdef USE_TIM2 -extern struct TIM_Sim tim2s; -#endif -#ifdef USE_TIM3 -extern struct TIM_Sim tim3s; -#endif -#ifdef USE_TIM4 -extern struct TIM_Sim tim4s; -#endif -#ifdef USE_TIM5 -extern struct TIM_Sim tim5s; -#endif -#ifdef USE_TIM6 -extern struct TIM_Sim tim6s; -#endif -#ifdef USE_TIM7 -extern struct TIM_Sim tim7s; -#endif -#ifdef USE_TIM8 -extern struct TIM_Sim tim8s; -#endif -#ifdef USE_TIM9 -extern struct TIM_Sim tim9s; -#endif -#ifdef USE_TIM10 -extern struct TIM_Sim tim10s; -#endif -#ifdef USE_TIM11 -extern struct TIM_Sim tim11s; -#endif -#ifdef USE_TIM12 -extern struct TIM_Sim tim12s; -#endif -#ifdef USE_TIM13 -extern struct TIM_Sim tim13s; -#endif -#ifdef USE_TIM14 -extern struct TIM_Sim tim14s; -#endif -/*-------------------------------TIMERS----------------------------------*/ -//-----------------------------------------------------------------------// - -/** MAIN_SIMULATOR - * @} - */ - -#endif // _MATLAB_CONF_H_ diff --git a/MCU_Wrapper/mcu_wrapper_conf.h b/MCU_Wrapper/mcu_wrapper_conf.h index 2c4a26a..e49878b 100644 --- a/MCU_Wrapper/mcu_wrapper_conf.h +++ b/MCU_Wrapper/mcu_wrapper_conf.h @@ -25,7 +25,7 @@ #define _CONTROLLER_H_ // Includes -#include "stm32f4xx_matlab_conf.h" // For stm simulate functions +#include "stm32f1xx_matlab_conf.h" // For stm simulate functions #include "simstruc.h" // For S-Function variables #include // For threads